diff options
Diffstat (limited to 'drivers/gpu/drm/i915')
-rw-r--r-- | drivers/gpu/drm/i915/intel_dpll_mgr.c | 223 |
1 files changed, 222 insertions, 1 deletions
diff --git a/drivers/gpu/drm/i915/intel_dpll_mgr.c b/drivers/gpu/drm/i915/intel_dpll_mgr.c index 30eca819cb11..383fbc15113d 100644 --- a/drivers/gpu/drm/i915/intel_dpll_mgr.c +++ b/drivers/gpu/drm/i915/intel_dpll_mgr.c @@ -2535,11 +2535,232 @@ static enum intel_dpll_id icl_port_to_mg_pll_id(enum port port) return port - PORT_C + DPLL_ID_ICL_MGPLL1; } +static bool icl_mg_pll_find_divisors(int clock_khz, bool is_dp, bool use_ssc, + uint32_t *target_dco_khz, + struct intel_dpll_hw_state *state) +{ + uint32_t dco_min_freq, dco_max_freq; + int div1_vals[] = {7, 5, 3, 2}; + unsigned int i; + int div2; + + dco_min_freq = is_dp ? 8100000 : use_ssc ? 8000000 : 7992000; + dco_max_freq = is_dp ? 8100000 : 10000000; + + for (i = 0; i < ARRAY_SIZE(div1_vals); i++) { + int div1 = div1_vals[i]; + + for (div2 = 10; div2 > 0; div2--) { + int dco = div1 * div2 * clock_khz * 5; + int a_divratio, tlinedrv, inputsel, hsdiv; + + if (dco < dco_min_freq || dco > dco_max_freq) + continue; + + if (div2 >= 2) { + a_divratio = is_dp ? 10 : 5; + tlinedrv = 2; + } else { + a_divratio = 5; + tlinedrv = 0; + } + inputsel = is_dp ? 0 : 1; + + switch (div1) { + default: + MISSING_CASE(div1); + case 2: + hsdiv = 0; + break; + case 3: + hsdiv = 1; + break; + case 5: + hsdiv = 2; + break; + case 7: + hsdiv = 3; + break; + } + + *target_dco_khz = dco; + + state->mg_refclkin_ctl = MG_REFCLKIN_CTL_OD_2_MUX(1); + + state->mg_clktop2_coreclkctl1 = + MG_CLKTOP2_CORECLKCTL1_A_DIVRATIO(a_divratio); + + state->mg_clktop2_hsclkctl = + MG_CLKTOP2_HSCLKCTL_TLINEDRV_CLKSEL(tlinedrv) | + MG_CLKTOP2_HSCLKCTL_CORE_INPUTSEL(inputsel) | + MG_CLKTOP2_HSCLKCTL_HSDIV_RATIO(hsdiv) | + MG_CLKTOP2_HSCLKCTL_DSDIV_RATIO(div2); + + return true; + } + } + + return false; +} + +/* + * The specification for this function uses real numbers, so the math had to be + * adapted to integer-only calculation, that's why it looks so different. + */ static bool icl_calc_mg_pll_state(struct intel_crtc_state *crtc_state, struct intel_encoder *encoder, int clock, struct intel_dpll_hw_state *pll_state) { - /* TODO */ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + int refclk_khz = dev_priv->cdclk.hw.ref; + uint32_t dco_khz, m1div, m2div_int, m2div_rem, m2div_frac; + uint32_t iref_ndiv, iref_trim, iref_pulse_w; + uint32_t prop_coeff, int_coeff; + uint32_t tdc_targetcnt, feedfwgain; + uint64_t ssc_stepsize, ssc_steplen, ssc_steplog; + uint64_t tmp; + bool use_ssc = false; + bool is_dp = !intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI); + + if (!icl_mg_pll_find_divisors(clock, is_dp, use_ssc, &dco_khz, + pll_state)) { + DRM_DEBUG_KMS("Failed to find divisors for clock %d\n", clock); + return false; + } + + m1div = 2; + m2div_int = dco_khz / (refclk_khz * m1div); + if (m2div_int > 255) { + m1div = 4; + m2div_int = dco_khz / (refclk_khz * m1div); + if (m2div_int > 255) { + DRM_DEBUG_KMS("Failed to find mdiv for clock %d\n", + clock); + return false; + } + } + m2div_rem = dco_khz % (refclk_khz * m1div); + + tmp = (uint64_t)m2div_rem * (1 << 22); + do_div(tmp, refclk_khz * m1div); + m2div_frac = tmp; + + switch (refclk_khz) { + case 19200: + iref_ndiv = 1; + iref_trim = 28; + iref_pulse_w = 1; + break; + case 24000: + iref_ndiv = 1; + iref_trim = 25; + iref_pulse_w = 2; + break; + case 38400: + iref_ndiv = 2; + iref_trim = 28; + iref_pulse_w = 1; + break; + default: + MISSING_CASE(refclk_khz); + return false; + } + + /* + * tdc_res = 0.000003 + * tdc_targetcnt = int(2 / (tdc_res * 8 * 50 * 1.1) / refclk_mhz + 0.5) + * + * The multiplication by 1000 is due to refclk MHz to KHz conversion. It + * was supposed to be a division, but we rearranged the operations of + * the formula to avoid early divisions so we don't multiply the + * rounding errors. + * + * 0.000003 * 8 * 50 * 1.1 = 0.00132, also known as 132 / 100000, which + * we also rearrange to work with integers. + * + * The 0.5 transformed to 5 results in a multiplication by 10 and the + * last division by 10. + */ + tdc_targetcnt = (2 * 1000 * 100000 * 10 / (132 * refclk_khz) + 5) / 10; + + /* + * Here we divide dco_khz by 10 in order to allow the dividend to fit in + * 32 bits. That's not a problem since we round the division down + * anyway. + */ + feedfwgain = (use_ssc || m2div_rem > 0) ? + m1div * 1000000 * 100 / (dco_khz * 3 / 10) : 0; + + if (dco_khz >= 9000000) { + prop_coeff = 5; + int_coeff = 10; + } else { + prop_coeff = 4; + int_coeff = 8; + } + + if (use_ssc) { + tmp = (uint64_t)dco_khz * 47 * 32; + do_div(tmp, refclk_khz * m1div * 10000); + ssc_stepsize = tmp; + + tmp = (uint64_t)dco_khz * 1000; + ssc_steplen = DIV_ROUND_UP_ULL(tmp, 32 * 2 * 32); + } else { + ssc_stepsize = 0; + ssc_steplen = 0; + } + ssc_steplog = 4; + + pll_state->mg_pll_div0 = (m2div_rem > 0 ? MG_PLL_DIV0_FRACNEN_H : 0) | + MG_PLL_DIV0_FBDIV_FRAC(m2div_frac) | + MG_PLL_DIV0_FBDIV_INT(m2div_int); + + pll_state->mg_pll_div1 = MG_PLL_DIV1_IREF_NDIVRATIO(iref_ndiv) | + MG_PLL_DIV1_DITHER_DIV_2 | + MG_PLL_DIV1_NDIVRATIO(1) | + MG_PLL_DIV1_FBPREDIV(m1div); + + pll_state->mg_pll_lf = MG_PLL_LF_TDCTARGETCNT(tdc_targetcnt) | + MG_PLL_LF_AFCCNTSEL_512 | + MG_PLL_LF_GAINCTRL(1) | + MG_PLL_LF_INT_COEFF(int_coeff) | + MG_PLL_LF_PROP_COEFF(prop_coeff); + + pll_state->mg_pll_frac_lock = MG_PLL_FRAC_LOCK_TRUELOCK_CRIT_32 | + MG_PLL_FRAC_LOCK_EARLYLOCK_CRIT_32 | + MG_PLL_FRAC_LOCK_LOCKTHRESH(10) | + MG_PLL_FRAC_LOCK_DCODITHEREN | + MG_PLL_FRAC_LOCK_FEEDFWRDGAIN(feedfwgain); + if (use_ssc || m2div_rem > 0) + pll_state->mg_pll_frac_lock |= MG_PLL_FRAC_LOCK_FEEDFWRDCAL_EN; + + pll_state->mg_pll_ssc = (use_ssc ? MG_PLL_SSC_EN : 0) | + MG_PLL_SSC_TYPE(2) | + MG_PLL_SSC_STEPLENGTH(ssc_steplen) | + MG_PLL_SSC_STEPNUM(ssc_steplog) | + MG_PLL_SSC_FLLEN | + MG_PLL_SSC_STEPSIZE(ssc_stepsize); + + pll_state->mg_pll_tdc_coldst_bias = MG_PLL_TDC_COLDST_COLDSTART; + + if (refclk_khz != 38400) { + pll_state->mg_pll_tdc_coldst_bias |= + MG_PLL_TDC_COLDST_IREFINT_EN | + MG_PLL_TDC_COLDST_REFBIAS_START_PULSE_W(iref_pulse_w) | + MG_PLL_TDC_COLDST_COLDSTART | + MG_PLL_TDC_TDCOVCCORR_EN | + MG_PLL_TDC_TDCSEL(3); + + pll_state->mg_pll_bias = MG_PLL_BIAS_BIAS_GB_SEL(3) | + MG_PLL_BIAS_INIT_DCOAMP(0x3F) | + MG_PLL_BIAS_BIAS_BONUS(10) | + MG_PLL_BIAS_BIASCAL_EN | + MG_PLL_BIAS_CTRIM(12) | + MG_PLL_BIAS_VREF_RDAC(4) | + MG_PLL_BIAS_IREFTRIM(iref_trim); + } + return true; } |