diff options
Diffstat (limited to 'drivers/i2c/busses/i2c-octeon.c')
-rw-r--r-- | drivers/i2c/busses/i2c-octeon.c | 53 |
1 files changed, 51 insertions, 2 deletions
diff --git a/drivers/i2c/busses/i2c-octeon.c b/drivers/i2c/busses/i2c-octeon.c index cb418140cbbe..aa5f01efd826 100644 --- a/drivers/i2c/busses/i2c-octeon.c +++ b/drivers/i2c/busses/i2c-octeon.c @@ -121,6 +121,8 @@ struct octeon_i2c { void __iomem *twsi_base; struct device *dev; bool hlc_enabled; + bool broken_irq_mode; + bool broken_irq_check; void (*int_enable)(struct octeon_i2c *); void (*int_disable)(struct octeon_i2c *); void (*hlc_int_enable)(struct octeon_i2c *); @@ -375,10 +377,32 @@ static int octeon_i2c_wait(struct octeon_i2c *i2c) long time_left; bool first = 1; + /* + * Some chip revisions don't assert the irq in the interrupt + * controller. So we must poll for the IFLG change. + */ + if (i2c->broken_irq_mode) { + u64 end = get_jiffies_64() + i2c->adap.timeout; + + while (!octeon_i2c_test_iflg(i2c) && + time_before64(get_jiffies_64(), end)) + usleep_range(I2C_OCTEON_EVENT_WAIT / 2, I2C_OCTEON_EVENT_WAIT); + + return octeon_i2c_test_iflg(i2c) ? 0 : -ETIMEDOUT; + } + i2c->int_enable(i2c); time_left = wait_event_timeout(i2c->queue, octeon_i2c_test_ready(i2c, &first), i2c->adap.timeout); i2c->int_disable(i2c); + + if (i2c->broken_irq_check && !time_left && + octeon_i2c_test_iflg(i2c)) { + dev_err(i2c->dev, "broken irq connection detected, switching to polling mode.\n"); + i2c->broken_irq_mode = true; + return 0; + } + if (!time_left) return -ETIMEDOUT; @@ -492,15 +516,37 @@ static int octeon_i2c_hlc_wait(struct octeon_i2c *i2c) bool first = 1; int time_left; + /* + * Some cn38xx boards don't assert the irq in the interrupt + * controller. So we must poll for the valid bit change. + */ + if (i2c->broken_irq_mode) { + u64 end = get_jiffies_64() + i2c->adap.timeout; + + while (!octeon_i2c_hlc_test_valid(i2c) && + time_before64(get_jiffies_64(), end)) + usleep_range(I2C_OCTEON_EVENT_WAIT / 2, I2C_OCTEON_EVENT_WAIT); + + return octeon_i2c_hlc_test_valid(i2c) ? 0 : -ETIMEDOUT; + } + i2c->hlc_int_enable(i2c); time_left = wait_event_timeout(i2c->queue, octeon_i2c_hlc_test_ready(i2c, &first), i2c->adap.timeout); i2c->hlc_int_disable(i2c); - if (!time_left) { + if (!time_left) octeon_i2c_hlc_int_clear(i2c); - return -ETIMEDOUT; + + if (i2c->broken_irq_check && !time_left && + octeon_i2c_hlc_test_valid(i2c)) { + dev_err(i2c->dev, "broken irq connection detected, switching to polling mode.\n"); + i2c->broken_irq_mode = true; + return 0; } + + if (!time_left) + return -ETIMEDOUT; return 0; } @@ -1143,6 +1189,9 @@ static int octeon_i2c_probe(struct platform_device *pdev) goto out; } + if (OCTEON_IS_MODEL(OCTEON_CN38XX)) + i2c->broken_irq_check = true; + result = octeon_i2c_init_lowlevel(i2c); if (result) { dev_err(i2c->dev, "init low level failed\n"); |