summaryrefslogtreecommitdiffstats
path: root/drivers/i2c/busses/i2c-prosavage.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c/busses/i2c-prosavage.c')
-rw-r--r--drivers/i2c/busses/i2c-prosavage.c325
1 files changed, 0 insertions, 325 deletions
diff --git a/drivers/i2c/busses/i2c-prosavage.c b/drivers/i2c/busses/i2c-prosavage.c
deleted file mode 100644
index 07c1f1e27df1..000000000000
--- a/drivers/i2c/busses/i2c-prosavage.c
+++ /dev/null
@@ -1,325 +0,0 @@
-/*
- * kernel/busses/i2c-prosavage.c
- *
- * i2c bus driver for S3/VIA 8365/8375 graphics processor.
- * Copyright (c) 2003 Henk Vergonet <henk@god.dyndns.org>
- * Based on code written by:
- * Frodo Looijaard <frodol@dds.nl>,
- * Philip Edelbrock <phil@netroedge.com>,
- * Ralph Metzler <rjkm@thp.uni-koeln.de>, and
- * Mark D. Studebaker <mdsxyz123@yahoo.com>
- * Simon Vogl
- * and others
- *
- * Please read the lm_sensors documentation for details on use.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-/* 18-05-2003 HVE - created
- * 14-06-2003 HVE - adapted for lm_sensors2
- * 17-06-2003 HVE - linux 2.5.xx compatible
- * 18-06-2003 HVE - codingstyle
- * 21-06-2003 HVE - compatibility lm_sensors2 and linux 2.5.xx
- * codingstyle, mmio enabled
- *
- * This driver interfaces to the I2C bus of the VIA north bridge embedded
- * ProSavage4/8 devices. Usefull for gaining access to the TV Encoder chips.
- *
- * Graphics cores:
- * S3/VIA KM266/VT8375 aka ProSavage8
- * S3/VIA KM133/VT8365 aka Savage4
- *
- * Two serial busses are implemented:
- * SERIAL1 - I2C serial communications interface
- * SERIAL2 - DDC2 monitor communications interface
- *
- * Tested on a FX41 mainboard, see http://www.shuttle.com
- *
- *
- * TODO:
- * - integration with prosavage framebuffer device
- * (Additional documentation needed :(
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/i2c.h>
-#include <linux/i2c-algo-bit.h>
-#include <asm/io.h>
-
-/*
- * driver configuration
- */
-#define MAX_BUSSES 2
-
-struct s_i2c_bus {
- void __iomem *mmvga;
- int i2c_reg;
- int adap_ok;
- struct i2c_adapter adap;
- struct i2c_algo_bit_data algo;
-};
-
-struct s_i2c_chip {
- void __iomem *mmio;
- struct s_i2c_bus i2c_bus[MAX_BUSSES];
-};
-
-
-/*
- * i2c configuration
- */
-#define CYCLE_DELAY 10
-#define TIMEOUT (HZ / 2)
-
-
-/*
- * S3/VIA 8365/8375 registers
- */
-#define VGA_CR_IX 0x3d4
-#define VGA_CR_DATA 0x3d5
-
-#define CR_SERIAL1 0xa0 /* I2C serial communications interface */
-#define MM_SERIAL1 0xff20
-#define CR_SERIAL2 0xb1 /* DDC2 monitor communications interface */
-
-/* based on vt8365 documentation */
-#define I2C_ENAB 0x10
-#define I2C_SCL_OUT 0x01
-#define I2C_SDA_OUT 0x02
-#define I2C_SCL_IN 0x04
-#define I2C_SDA_IN 0x08
-
-#define SET_CR_IX(p, val) writeb((val), (p)->mmvga + VGA_CR_IX)
-#define SET_CR_DATA(p, val) writeb((val), (p)->mmvga + VGA_CR_DATA)
-#define GET_CR_DATA(p) readb((p)->mmvga + VGA_CR_DATA)
-
-
-/*
- * Serial bus line handling
- *
- * serial communications register as parameter in private data
- *
- * TODO: locks with other code sections accessing video registers?
- */
-static void bit_s3via_setscl(void *bus, int val)
-{
- struct s_i2c_bus *p = (struct s_i2c_bus *)bus;
- unsigned int r;
-
- SET_CR_IX(p, p->i2c_reg);
- r = GET_CR_DATA(p);
- r |= I2C_ENAB;
- if (val) {
- r |= I2C_SCL_OUT;
- } else {
- r &= ~I2C_SCL_OUT;
- }
- SET_CR_DATA(p, r);
-}
-
-static void bit_s3via_setsda(void *bus, int val)
-{
- struct s_i2c_bus *p = (struct s_i2c_bus *)bus;
- unsigned int r;
-
- SET_CR_IX(p, p->i2c_reg);
- r = GET_CR_DATA(p);
- r |= I2C_ENAB;
- if (val) {
- r |= I2C_SDA_OUT;
- } else {
- r &= ~I2C_SDA_OUT;
- }
- SET_CR_DATA(p, r);
-}
-
-static int bit_s3via_getscl(void *bus)
-{
- struct s_i2c_bus *p = (struct s_i2c_bus *)bus;
-
- SET_CR_IX(p, p->i2c_reg);
- return (0 != (GET_CR_DATA(p) & I2C_SCL_IN));
-}
-
-static int bit_s3via_getsda(void *bus)
-{
- struct s_i2c_bus *p = (struct s_i2c_bus *)bus;
-
- SET_CR_IX(p, p->i2c_reg);
- return (0 != (GET_CR_DATA(p) & I2C_SDA_IN));
-}
-
-
-/*
- * adapter initialisation
- */
-static int i2c_register_bus(struct pci_dev *dev, struct s_i2c_bus *p, void __iomem *mmvga, u32 i2c_reg)
-{
- int ret;
- p->adap.owner = THIS_MODULE;
- p->adap.id = I2C_HW_B_S3VIA;
- p->adap.algo_data = &p->algo;
- p->adap.dev.parent = &dev->dev;
- p->algo.setsda = bit_s3via_setsda;
- p->algo.setscl = bit_s3via_setscl;
- p->algo.getsda = bit_s3via_getsda;
- p->algo.getscl = bit_s3via_getscl;
- p->algo.udelay = CYCLE_DELAY;
- p->algo.timeout = TIMEOUT;
- p->algo.data = p;
- p->mmvga = mmvga;
- p->i2c_reg = i2c_reg;
-
- ret = i2c_bit_add_bus(&p->adap);
- if (ret) {
- return ret;
- }
-
- p->adap_ok = 1;
- return 0;
-}
-
-
-/*
- * Cleanup stuff
- */
-static void prosavage_remove(struct pci_dev *dev)
-{
- struct s_i2c_chip *chip;
- int i, ret;
-
- chip = (struct s_i2c_chip *)pci_get_drvdata(dev);
-
- if (!chip) {
- return;
- }
- for (i = MAX_BUSSES - 1; i >= 0; i--) {
- if (chip->i2c_bus[i].adap_ok == 0)
- continue;
-
- ret = i2c_del_adapter(&chip->i2c_bus[i].adap);
- if (ret) {
- dev_err(&dev->dev, "%s not removed\n",
- chip->i2c_bus[i].adap.name);
- }
- }
- if (chip->mmio) {
- iounmap(chip->mmio);
- }
- kfree(chip);
-}
-
-
-/*
- * Detect chip and initialize it
- */
-static int __devinit prosavage_probe(struct pci_dev *dev, const struct pci_device_id *id)
-{
- int ret;
- unsigned long base, len;
- struct s_i2c_chip *chip;
- struct s_i2c_bus *bus;
-
- pci_set_drvdata(dev, kzalloc(sizeof(struct s_i2c_chip), GFP_KERNEL));
- chip = (struct s_i2c_chip *)pci_get_drvdata(dev);
- if (chip == NULL) {
- return -ENOMEM;
- }
-
- base = dev->resource[0].start & PCI_BASE_ADDRESS_MEM_MASK;
- len = dev->resource[0].end - base + 1;
- chip->mmio = ioremap_nocache(base, len);
-
- if (chip->mmio == NULL) {
- dev_err(&dev->dev, "ioremap failed\n");
- prosavage_remove(dev);
- return -ENODEV;
- }
-
-
- /*
- * Chip initialisation
- */
- /* Unlock Extended IO Space ??? */
-
-
- /*
- * i2c bus registration
- */
- bus = &chip->i2c_bus[0];
- snprintf(bus->adap.name, sizeof(bus->adap.name),
- "ProSavage I2C bus at %02x:%02x.%x",
- dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
- ret = i2c_register_bus(dev, bus, chip->mmio + 0x8000, CR_SERIAL1);
- if (ret) {
- goto err_adap;
- }
- /*
- * ddc bus registration
- */
- bus = &chip->i2c_bus[1];
- snprintf(bus->adap.name, sizeof(bus->adap.name),
- "ProSavage DDC bus at %02x:%02x.%x",
- dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
- ret = i2c_register_bus(dev, bus, chip->mmio + 0x8000, CR_SERIAL2);
- if (ret) {
- goto err_adap;
- }
- return 0;
-err_adap:
- dev_err(&dev->dev, "%s failed\n", bus->adap.name);
- prosavage_remove(dev);
- return ret;
-}
-
-
-/*
- * Data for PCI driver interface
- */
-static struct pci_device_id prosavage_pci_tbl[] = {
- { PCI_DEVICE(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_SAVAGE4) },
- { PCI_DEVICE(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_PROSAVAGE8) },
- { 0, },
-};
-
-MODULE_DEVICE_TABLE (pci, prosavage_pci_tbl);
-
-static struct pci_driver prosavage_driver = {
- .name = "prosavage_smbus",
- .id_table = prosavage_pci_tbl,
- .probe = prosavage_probe,
- .remove = prosavage_remove,
-};
-
-static int __init i2c_prosavage_init(void)
-{
- return pci_register_driver(&prosavage_driver);
-}
-
-static void __exit i2c_prosavage_exit(void)
-{
- pci_unregister_driver(&prosavage_driver);
-}
-
-MODULE_DEVICE_TABLE(pci, prosavage_pci_tbl);
-MODULE_AUTHOR("Henk Vergonet");
-MODULE_DESCRIPTION("ProSavage VIA 8365/8375 smbus driver");
-MODULE_LICENSE("GPL");
-
-module_init (i2c_prosavage_init);
-module_exit (i2c_prosavage_exit);
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-17 20:27:51 +0000