summaryrefslogtreecommitdiffstats
path: root/drivers/ide/alim15x3.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ide/alim15x3.c')
-rw-r--r--drivers/ide/alim15x3.c171
1 files changed, 92 insertions, 79 deletions
diff --git a/drivers/ide/alim15x3.c b/drivers/ide/alim15x3.c
index 0abc43f3101e..2c8016ad0e26 100644
--- a/drivers/ide/alim15x3.c
+++ b/drivers/ide/alim15x3.c
@@ -8,7 +8,7 @@
* Copyright (C) 2002 Alan Cox
* ALi (now ULi M5228) support by Clear Zhang <Clear.Zhang@ali.com.tw>
* Copyright (C) 2007 MontaVista Software, Inc. <source@mvista.com>
- * Copyright (C) 2007 Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
+ * Copyright (C) 2007-2010 Bartlomiej Zolnierkiewicz
*
* (U)DMA capable version of ali 1533/1543(C), 1535(D)
*
@@ -48,61 +48,84 @@ static u8 m5229_revision;
static u8 chip_is_1543c_e;
static struct pci_dev *isa_dev;
+static void ali_fifo_control(ide_hwif_t *hwif, ide_drive_t *drive, int on)
+{
+ struct pci_dev *pdev = to_pci_dev(hwif->dev);
+ int pio_fifo = 0x54 + hwif->channel;
+ u8 fifo;
+ int shift = 4 * (drive->dn & 1);
+
+ pci_read_config_byte(pdev, pio_fifo, &fifo);
+ fifo &= ~(0x0F << shift);
+ fifo |= (on << shift);
+ pci_write_config_byte(pdev, pio_fifo, fifo);
+}
+
+static void ali_program_timings(ide_hwif_t *hwif, ide_drive_t *drive,
+ struct ide_timing *t, u8 ultra)
+{
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ int port = hwif->channel ? 0x5c : 0x58;
+ int udmat = 0x56 + hwif->channel;
+ u8 unit = drive->dn & 1, udma;
+ int shift = 4 * unit;
+
+ /* Set up the UDMA */
+ pci_read_config_byte(dev, udmat, &udma);
+ udma &= ~(0x0F << shift);
+ udma |= ultra << shift;
+ pci_write_config_byte(dev, udmat, udma);
+
+ if (t == NULL)
+ return;
+
+ t->setup = clamp_val(t->setup, 1, 8) & 7;
+ t->act8b = clamp_val(t->act8b, 1, 8) & 7;
+ t->rec8b = clamp_val(t->rec8b, 1, 16) & 15;
+ t->active = clamp_val(t->active, 1, 8) & 7;
+ t->recover = clamp_val(t->recover, 1, 16) & 15;
+
+ pci_write_config_byte(dev, port, t->setup);
+ pci_write_config_byte(dev, port + 1, (t->act8b << 4) | t->rec8b);
+ pci_write_config_byte(dev, port + unit + 2,
+ (t->active << 4) | t->recover);
+}
+
/**
* ali_set_pio_mode - set host controller for PIO mode
+ * @hwif: port
* @drive: drive
- * @pio: PIO mode number
*
* Program the controller for the given PIO mode.
*/
-static void ali_set_pio_mode(ide_drive_t *drive, const u8 pio)
+static void ali_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
{
- ide_hwif_t *hwif = drive->hwif;
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio);
- int s_time = t->setup, a_time = t->active, c_time = t->cycle;
- u8 s_clc, a_clc, r_clc;
- unsigned long flags;
+ ide_drive_t *pair = ide_get_pair_dev(drive);
int bus_speed = ide_pci_clk ? ide_pci_clk : 33;
- int port = hwif->channel ? 0x5c : 0x58;
- int portFIFO = hwif->channel ? 0x55 : 0x54;
- u8 cd_dma_fifo = 0, unit = drive->dn & 1;
-
- if ((s_clc = (s_time * bus_speed + 999) / 1000) >= 8)
- s_clc = 0;
- if ((a_clc = (a_time * bus_speed + 999) / 1000) >= 8)
- a_clc = 0;
-
- if (!(r_clc = (c_time * bus_speed + 999) / 1000 - a_clc - s_clc)) {
- r_clc = 1;
- } else {
- if (r_clc >= 16)
- r_clc = 0;
+ unsigned long T = 1000000 / bus_speed; /* PCI clock based */
+ struct ide_timing t;
+
+ ide_timing_compute(drive, drive->pio_mode, &t, T, 1);
+ if (pair) {
+ struct ide_timing p;
+
+ ide_timing_compute(pair, pair->pio_mode, &p, T, 1);
+ ide_timing_merge(&p, &t, &t,
+ IDE_TIMING_SETUP | IDE_TIMING_8BIT);
+ if (pair->dma_mode) {
+ ide_timing_compute(pair, pair->dma_mode, &p, T, 1);
+ ide_timing_merge(&p, &t, &t,
+ IDE_TIMING_SETUP | IDE_TIMING_8BIT);
+ }
}
- local_irq_save(flags);
-
+
/*
* PIO mode => ATA FIFO on, ATAPI FIFO off
*/
- pci_read_config_byte(dev, portFIFO, &cd_dma_fifo);
- if (drive->media==ide_disk) {
- if (unit) {
- pci_write_config_byte(dev, portFIFO, (cd_dma_fifo & 0x0F) | 0x50);
- } else {
- pci_write_config_byte(dev, portFIFO, (cd_dma_fifo & 0xF0) | 0x05);
- }
- } else {
- if (unit) {
- pci_write_config_byte(dev, portFIFO, cd_dma_fifo & 0x0F);
- } else {
- pci_write_config_byte(dev, portFIFO, cd_dma_fifo & 0xF0);
- }
- }
-
- pci_write_config_byte(dev, port, s_clc);
- pci_write_config_byte(dev, port + unit + 2, (a_clc << 4) | r_clc);
- local_irq_restore(flags);
+ ali_fifo_control(hwif, drive, (drive->media == ide_disk) ? 0x05 : 0x00);
+
+ ali_program_timings(hwif, drive, &t, 0);
}
/**
@@ -132,44 +155,42 @@ static u8 ali_udma_filter(ide_drive_t *drive)
/**
* ali_set_dma_mode - set host controller for DMA mode
+ * @hwif: port
* @drive: drive
- * @speed: DMA mode
*
* Configure the hardware for the desired IDE transfer mode.
*/
-static void ali_set_dma_mode(ide_drive_t *drive, const u8 speed)
+static void ali_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
{
- ide_hwif_t *hwif = drive->hwif;
+ static u8 udma_timing[7] = { 0xC, 0xB, 0xA, 0x9, 0x8, 0xF, 0xD };
struct pci_dev *dev = to_pci_dev(hwif->dev);
- u8 speed1 = speed;
- u8 unit = drive->dn & 1;
+ ide_drive_t *pair = ide_get_pair_dev(drive);
+ int bus_speed = ide_pci_clk ? ide_pci_clk : 33;
+ unsigned long T = 1000000 / bus_speed; /* PCI clock based */
+ const u8 speed = drive->dma_mode;
u8 tmpbyte = 0x00;
- int m5229_udma = (hwif->channel) ? 0x57 : 0x56;
-
- if (speed == XFER_UDMA_6)
- speed1 = 0x47;
+ struct ide_timing t;
if (speed < XFER_UDMA_0) {
- u8 ultra_enable = (unit) ? 0x7f : 0xf7;
- /*
- * clear "ultra enable" bit
- */
- pci_read_config_byte(dev, m5229_udma, &tmpbyte);
- tmpbyte &= ultra_enable;
- pci_write_config_byte(dev, m5229_udma, tmpbyte);
-
- /*
- * FIXME: Oh, my... DMA timings are never set.
- */
+ ide_timing_compute(drive, drive->dma_mode, &t, T, 1);
+ if (pair) {
+ struct ide_timing p;
+
+ ide_timing_compute(pair, pair->pio_mode, &p, T, 1);
+ ide_timing_merge(&p, &t, &t,
+ IDE_TIMING_SETUP | IDE_TIMING_8BIT);
+ if (pair->dma_mode) {
+ ide_timing_compute(pair, pair->dma_mode,
+ &p, T, 1);
+ ide_timing_merge(&p, &t, &t,
+ IDE_TIMING_SETUP | IDE_TIMING_8BIT);
+ }
+ }
+ ali_program_timings(hwif, drive, &t, 0);
} else {
- pci_read_config_byte(dev, m5229_udma, &tmpbyte);
- tmpbyte &= (0x0f << ((1-unit) << 2));
- /*
- * enable ultra dma and set timing
- */
- tmpbyte |= ((0x08 | ((4-speed1)&0x07)) << (unit << 2));
- pci_write_config_byte(dev, m5229_udma, tmpbyte);
+ ali_program_timings(hwif, drive, NULL,
+ udma_timing[speed - XFER_UDMA_0]);
if (speed >= XFER_UDMA_3) {
pci_read_config_byte(dev, 0x4b, &tmpbyte);
tmpbyte |= 1;
@@ -355,19 +376,13 @@ static int ali_cable_override(struct pci_dev *pdev)
*
* This checks if the controller and the cable are capable
* of UDMA66 transfers. It doesn't check the drives.
- * But see note 2 below!
- *
- * FIXME: frobs bits that are not defined on newer ALi devicea
*/
static u8 ali_cable_detect(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
- unsigned long flags;
u8 cbl = ATA_CBL_PATA40, tmpbyte;
- local_irq_save(flags);
-
if (m5229_revision >= 0xC2) {
/*
* m5229 80-pin cable detection (from Host View)
@@ -387,8 +402,6 @@ static u8 ali_cable_detect(ide_hwif_t *hwif)
}
}
- local_irq_restore(flags);
-
return cbl;
}
@@ -584,6 +597,6 @@ static void __exit ali15x3_ide_exit(void)
module_init(ali15x3_ide_init);
module_exit(ali15x3_ide_exit);
-MODULE_AUTHOR("Michael Aubry, Andrzej Krzysztofowicz, CJ, Andre Hedrick, Alan Cox");
+MODULE_AUTHOR("Michael Aubry, Andrzej Krzysztofowicz, CJ, Andre Hedrick, Alan Cox, Bartlomiej Zolnierkiewicz");
MODULE_DESCRIPTION("PCI driver module for ALi 15x3 IDE");
MODULE_LICENSE("GPL");
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-18 17:03:59 +0000