summaryrefslogtreecommitdiffstats
path: root/drivers/ide/pci
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ide/pci')
-rw-r--r--drivers/ide/pci/alim15x3.c16
-rw-r--r--drivers/ide/pci/amd74xx.c7
-rw-r--r--drivers/ide/pci/generic.c19
-rw-r--r--drivers/ide/pci/pdc202xx_new.c503
-rw-r--r--drivers/ide/pci/piix.c4
-rw-r--r--drivers/ide/pci/sgiioc4.c9
-rw-r--r--drivers/ide/pci/sis5513.c3
-rw-r--r--drivers/ide/pci/sl82c105.c31
-rw-r--r--drivers/ide/pci/via82cxxx.c25
9 files changed, 452 insertions, 165 deletions
diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c
index d419e4bb54f4..89109be5162c 100644
--- a/drivers/ide/pci/alim15x3.c
+++ b/drivers/ide/pci/alim15x3.c
@@ -586,11 +586,11 @@ static unsigned int __devinit init_chipset_ali15x3 (struct pci_dev *dev, const c
{
unsigned long flags;
u8 tmpbyte;
- struct pci_dev *north = pci_find_slot(0, PCI_DEVFN(0,0));
+ struct pci_dev *north = pci_get_slot(dev->bus, PCI_DEVFN(0,0));
pci_read_config_byte(dev, PCI_REVISION_ID, &m5229_revision);
- isa_dev = pci_find_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL);
+ isa_dev = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL);
#if defined(DISPLAY_ALI_TIMINGS) && defined(CONFIG_PROC_FS)
if (!ali_proc) {
@@ -613,8 +613,7 @@ static unsigned int __devinit init_chipset_ali15x3 (struct pci_dev *dev, const c
* clear bit 7
*/
pci_write_config_byte(dev, 0x4b, tmpbyte & 0x7F);
- local_irq_restore(flags);
- return 0;
+ goto out;
}
/*
@@ -637,10 +636,8 @@ static unsigned int __devinit init_chipset_ali15x3 (struct pci_dev *dev, const c
* box without a device at 0:0.0. The ALi bridge will be at
* 0:0.0 so if we didn't find one we know what is cooking.
*/
- if (north && north->vendor != PCI_VENDOR_ID_AL) {
- local_irq_restore(flags);
- return 0;
- }
+ if (north && north->vendor != PCI_VENDOR_ID_AL)
+ goto out;
if (m5229_revision < 0xC5 && isa_dev)
{
@@ -661,6 +658,9 @@ static unsigned int __devinit init_chipset_ali15x3 (struct pci_dev *dev, const c
pci_write_config_byte(isa_dev, 0x79, tmpbyte | 0x02);
}
}
+out:
+ pci_dev_put(north);
+ pci_dev_put(isa_dev);
local_irq_restore(flags);
return 0;
}
diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c
index 2b0ea8b6608d..753fe0e21456 100644
--- a/drivers/ide/pci/amd74xx.c
+++ b/drivers/ide/pci/amd74xx.c
@@ -75,6 +75,7 @@ static struct amd_ide_chip {
{ PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE, 0x50, AMD_UDMA_133 },
{ PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE, 0x50, AMD_UDMA_133 },
{ PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_IDE, 0x50, AMD_UDMA_133 },
+ { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_IDE, 0x50, AMD_UDMA_133 },
{ PCI_DEVICE_ID_AMD_CS5536_IDE, 0x40, AMD_UDMA_100 },
{ 0 }
};
@@ -491,7 +492,8 @@ static ide_pci_device_t amd74xx_chipsets[] __devinitdata = {
/* 16 */ DECLARE_NV_DEV("NFORCE-MCP55"),
/* 17 */ DECLARE_NV_DEV("NFORCE-MCP61"),
/* 18 */ DECLARE_NV_DEV("NFORCE-MCP65"),
- /* 19 */ DECLARE_AMD_DEV("AMD5536"),
+ /* 19 */ DECLARE_NV_DEV("NFORCE-MCP67"),
+ /* 20 */ DECLARE_AMD_DEV("AMD5536"),
};
static int __devinit amd74xx_probe(struct pci_dev *dev, const struct pci_device_id *id)
@@ -530,7 +532,8 @@ static struct pci_device_id amd74xx_pci_tbl[] = {
{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 16 },
{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 17 },
{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 18 },
- { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 19 },
+ { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 19 },
+ { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 20 },
{ 0, },
};
MODULE_DEVICE_TABLE(pci, amd74xx_pci_tbl);
diff --git a/drivers/ide/pci/generic.c b/drivers/ide/pci/generic.c
index 5b77a5bcbf0c..9f306880491a 100644
--- a/drivers/ide/pci/generic.c
+++ b/drivers/ide/pci/generic.c
@@ -40,6 +40,19 @@
static int ide_generic_all; /* Set to claim all devices */
+/*
+ * the module_param_named() was added for the modular case
+ * the __setup() is left as compatibility for existing setups
+ */
+#ifndef MODULE
+static int __init ide_generic_all_on(char *unused)
+{
+ ide_generic_all = 1;
+ printk(KERN_INFO "IDE generic will claim all unknown PCI IDE storage controllers.\n");
+ return 1;
+}
+__setup("all-generic-ide", ide_generic_all_on);
+#endif
module_param_named(all_generic_ide, ide_generic_all, bool, 0444);
MODULE_PARM_DESC(all_generic_ide, "IDE generic will claim all unknown PCI IDE storage controllers.");
@@ -234,8 +247,10 @@ static int __devinit generic_init_one(struct pci_dev *dev, const struct pci_devi
(!(PCI_FUNC(dev->devfn) & 1)))
goto out;
- if (dev->vendor == PCI_VENDOR_ID_JMICRON && PCI_FUNC(dev->devfn) != 1)
- goto out;
+ if (dev->vendor == PCI_VENDOR_ID_JMICRON) {
+ if (dev->device != PCI_DEVICE_ID_JMICRON_JMB368 && PCI_FUNC(dev->devfn) != 1)
+ goto out;
+ }
if (dev->vendor != PCI_VENDOR_ID_JMICRON) {
pci_read_config_word(dev, PCI_COMMAND, &command);
diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pci/pdc202xx_new.c
index 6c097e80b4df..7cb48576e479 100644
--- a/drivers/ide/pci/pdc202xx_new.c
+++ b/drivers/ide/pci/pdc202xx_new.c
@@ -9,6 +9,7 @@
* Split from:
* linux/drivers/ide/pdc202xx.c Version 0.35 Mar. 30, 2002
* Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org>
+ * Copyright (C) 2005-2006 MontaVista Software, Inc.
* Portions Copyright (C) 1999 Promise Technology, Inc.
* Author: Frank Tiernan (frankt@promise.com)
* Released under terms of General Public License
@@ -38,6 +39,14 @@
#define PDC202_DEBUG_CABLE 0
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(fmt, args...) printk("%s: " fmt, __FUNCTION__, ## args)
+#else
+#define DBG(fmt, args...)
+#endif
+
static const char *pdc_quirk_drives[] = {
"QUANTUM FIREBALLlct08 08",
"QUANTUM FIREBALLP KA6.4",
@@ -50,37 +59,11 @@ static const char *pdc_quirk_drives[] = {
NULL
};
-#define set_2regs(a, b) \
- do { \
- hwif->OUTB((a + adj), indexreg); \
- hwif->OUTB(b, datareg); \
- } while(0)
-
-#define set_ultra(a, b, c) \
- do { \
- set_2regs(0x10,(a)); \
- set_2regs(0x11,(b)); \
- set_2regs(0x12,(c)); \
- } while(0)
-
-#define set_ata2(a, b) \
- do { \
- set_2regs(0x0e,(a)); \
- set_2regs(0x0f,(b)); \
- } while(0)
-
-#define set_pio(a, b, c) \
- do { \
- set_2regs(0x0c,(a)); \
- set_2regs(0x0d,(b)); \
- set_2regs(0x13,(c)); \
- } while(0)
-
-static u8 pdcnew_ratemask (ide_drive_t *drive)
+static u8 max_dma_rate(struct pci_dev *pdev)
{
u8 mode;
- switch(HWIF(drive)->pci_dev->device) {
+ switch(pdev->device) {
case PCI_DEVICE_ID_PROMISE_20277:
case PCI_DEVICE_ID_PROMISE_20276:
case PCI_DEVICE_ID_PROMISE_20275:
@@ -95,12 +78,21 @@ static u8 pdcnew_ratemask (ide_drive_t *drive)
default:
return 0;
}
- if (!eighty_ninty_three(drive))
- mode = min(mode, (u8)1);
+
return mode;
}
-static int check_in_drive_lists (ide_drive_t *drive, const char **list)
+static u8 pdcnew_ratemask(ide_drive_t *drive)
+{
+ u8 mode = max_dma_rate(HWIF(drive)->pci_dev);
+
+ if (!eighty_ninty_three(drive))
+ mode = min_t(u8, mode, 1);
+
+ return mode;
+}
+
+static int check_in_drive_lists(ide_drive_t *drive, const char **list)
{
struct hd_driveid *id = drive->id;
@@ -120,43 +112,141 @@ static int check_in_drive_lists (ide_drive_t *drive, const char **list)
return 0;
}
-static int pdcnew_new_tune_chipset (ide_drive_t *drive, u8 xferspeed)
+/**
+ * get_indexed_reg - Get indexed register
+ * @hwif: for the port address
+ * @index: index of the indexed register
+ */
+static u8 get_indexed_reg(ide_hwif_t *hwif, u8 index)
+{
+ u8 value;
+
+ hwif->OUTB(index, hwif->dma_vendor1);
+ value = hwif->INB(hwif->dma_vendor3);
+
+ DBG("index[%02X] value[%02X]\n", index, value);
+ return value;
+}
+
+/**
+ * set_indexed_reg - Set indexed register
+ * @hwif: for the port address
+ * @index: index of the indexed register
+ */
+static void set_indexed_reg(ide_hwif_t *hwif, u8 index, u8 value)
+{
+ hwif->OUTB(index, hwif->dma_vendor1);
+ hwif->OUTB(value, hwif->dma_vendor3);
+ DBG("index[%02X] value[%02X]\n", index, value);
+}
+
+/*
+ * ATA Timing Tables based on 133 MHz PLL output clock.
+ *
+ * If the PLL outputs 100 MHz clock, the ASIC hardware will set
+ * the timing registers automatically when "set features" command is
+ * issued to the device. However, if the PLL output clock is 133 MHz,
+ * the following tables must be used.
+ */
+static struct pio_timing {
+ u8 reg0c, reg0d, reg13;
+} pio_timings [] = {
+ { 0xfb, 0x2b, 0xac }, /* PIO mode 0, IORDY off, Prefetch off */
+ { 0x46, 0x29, 0xa4 }, /* PIO mode 1, IORDY off, Prefetch off */
+ { 0x23, 0x26, 0x64 }, /* PIO mode 2, IORDY off, Prefetch off */
+ { 0x27, 0x0d, 0x35 }, /* PIO mode 3, IORDY on, Prefetch off */
+ { 0x23, 0x09, 0x25 }, /* PIO mode 4, IORDY on, Prefetch off */
+};
+
+static struct mwdma_timing {
+ u8 reg0e, reg0f;
+} mwdma_timings [] = {
+ { 0xdf, 0x5f }, /* MWDMA mode 0 */
+ { 0x6b, 0x27 }, /* MWDMA mode 1 */
+ { 0x69, 0x25 }, /* MWDMA mode 2 */
+};
+
+static struct udma_timing {
+ u8 reg10, reg11, reg12;
+} udma_timings [] = {
+ { 0x4a, 0x0f, 0xd5 }, /* UDMA mode 0 */
+ { 0x3a, 0x0a, 0xd0 }, /* UDMA mode 1 */
+ { 0x2a, 0x07, 0xcd }, /* UDMA mode 2 */
+ { 0x1a, 0x05, 0xcd }, /* UDMA mode 3 */
+ { 0x1a, 0x03, 0xcd }, /* UDMA mode 4 */
+ { 0x1a, 0x02, 0xcb }, /* UDMA mode 5 */
+ { 0x1a, 0x01, 0xcb }, /* UDMA mode 6 */
+};
+
+static int pdcnew_tune_chipset(ide_drive_t *drive, u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
- unsigned long indexreg = hwif->dma_vendor1;
- unsigned long datareg = hwif->dma_vendor3;
- u8 thold = 0x10;
- u8 adj = (drive->dn%2) ? 0x08 : 0x00;
- u8 speed = ide_rate_filter(pdcnew_ratemask(drive), xferspeed);
-
- if (speed == XFER_UDMA_2) {
- hwif->OUTB((thold + adj), indexreg);
- hwif->OUTB((hwif->INB(datareg) & 0x7f), datareg);
- }
+ u8 adj = (drive->dn & 1) ? 0x08 : 0x00;
+ int err;
- switch (speed) {
- case XFER_UDMA_7:
- speed = XFER_UDMA_6;
- case XFER_UDMA_6: set_ultra(0x1a, 0x01, 0xcb); break;
- case XFER_UDMA_5: set_ultra(0x1a, 0x02, 0xcb); break;
- case XFER_UDMA_4: set_ultra(0x1a, 0x03, 0xcd); break;
- case XFER_UDMA_3: set_ultra(0x1a, 0x05, 0xcd); break;
- case XFER_UDMA_2: set_ultra(0x2a, 0x07, 0xcd); break;
- case XFER_UDMA_1: set_ultra(0x3a, 0x0a, 0xd0); break;
- case XFER_UDMA_0: set_ultra(0x4a, 0x0f, 0xd5); break;
- case XFER_MW_DMA_2: set_ata2(0x69, 0x25); break;
- case XFER_MW_DMA_1: set_ata2(0x6b, 0x27); break;
- case XFER_MW_DMA_0: set_ata2(0xdf, 0x5f); break;
- case XFER_PIO_4: set_pio(0x23, 0x09, 0x25); break;
- case XFER_PIO_3: set_pio(0x27, 0x0d, 0x35); break;
- case XFER_PIO_2: set_pio(0x23, 0x26, 0x64); break;
- case XFER_PIO_1: set_pio(0x46, 0x29, 0xa4); break;
- case XFER_PIO_0: set_pio(0xfb, 0x2b, 0xac); break;
- default:
- ;
- }
+ speed = ide_rate_filter(pdcnew_ratemask(drive), speed);
+
+ /*
+ * Issue SETFEATURES_XFER to the drive first. PDC202xx hardware will
+ * automatically set the timing registers based on 100 MHz PLL output.
+ */
+ err = ide_config_drive_speed(drive, speed);
+
+ /*
+ * As we set up the PLL to output 133 MHz for UltraDMA/133 capable
+ * chips, we must override the default register settings...
+ */
+ if (max_dma_rate(hwif->pci_dev) == 4) {
+ u8 mode = speed & 0x07;
+
+ switch (speed) {
+ case XFER_UDMA_6:
+ case XFER_UDMA_5:
+ case XFER_UDMA_4:
+ case XFER_UDMA_3:
+ case XFER_UDMA_2:
+ case XFER_UDMA_1:
+ case XFER_UDMA_0:
+ set_indexed_reg(hwif, 0x10 + adj,
+ udma_timings[mode].reg10);
+ set_indexed_reg(hwif, 0x11 + adj,
+ udma_timings[mode].reg11);
+ set_indexed_reg(hwif, 0x12 + adj,
+ udma_timings[mode].reg12);
+ break;
+
+ case XFER_MW_DMA_2:
+ case XFER_MW_DMA_1:
+ case XFER_MW_DMA_0:
+ set_indexed_reg(hwif, 0x0e + adj,
+ mwdma_timings[mode].reg0e);
+ set_indexed_reg(hwif, 0x0f + adj,
+ mwdma_timings[mode].reg0f);
+ break;
+ case XFER_PIO_4:
+ case XFER_PIO_3:
+ case XFER_PIO_2:
+ case XFER_PIO_1:
+ case XFER_PIO_0:
+ set_indexed_reg(hwif, 0x0c + adj,
+ pio_timings[mode].reg0c);
+ set_indexed_reg(hwif, 0x0d + adj,
+ pio_timings[mode].reg0d);
+ set_indexed_reg(hwif, 0x13 + adj,
+ pio_timings[mode].reg13);
+ break;
+ default:
+ printk(KERN_ERR "pdc202xx_new: "
+ "Unknown speed %d ignored\n", speed);
+ }
+ } else if (speed == XFER_UDMA_2) {
+ /* Set tHOLD bit to 0 if using UDMA mode 2 */
+ u8 tmp = get_indexed_reg(hwif, 0x10 + adj);
- return (ide_config_drive_speed(drive, speed));
+ set_indexed_reg(hwif, 0x10 + adj, tmp & 0x7f);
+ }
+
+ return err;
}
/* 0 1 2 3 4 5 6 7 8
@@ -168,55 +258,55 @@ static int pdcnew_new_tune_chipset (ide_drive_t *drive, u8 xferspeed)
*/
static void pdcnew_tune_drive(ide_drive_t *drive, u8 pio)
{
- u8 speed;
-
- if (pio == 5) pio = 4;
- speed = XFER_PIO_0 + ide_get_best_pio_mode(drive, 255, pio, NULL);
-
- (void)pdcnew_new_tune_chipset(drive, speed);
+ pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ (void)pdcnew_tune_chipset(drive, XFER_PIO_0 + pio);
}
-static u8 pdcnew_new_cable_detect (ide_hwif_t *hwif)
+static u8 pdcnew_cable_detect(ide_hwif_t *hwif)
{
- hwif->OUTB(0x0b, hwif->dma_vendor1);
- return ((u8)((hwif->INB(hwif->dma_vendor3) & 0x04)));
+ return get_indexed_reg(hwif, 0x0b) & 0x04;
}
-static int config_chipset_for_dma (ide_drive_t *drive)
+
+static int config_chipset_for_dma(ide_drive_t *drive)
{
struct hd_driveid *id = drive->id;
ide_hwif_t *hwif = HWIF(drive);
- u8 speed = -1;
- u8 cable;
-
- u8 ultra_66 = ((id->dma_ultra & 0x0010) ||
- (id->dma_ultra & 0x0008)) ? 1 : 0;
-
- cable = pdcnew_new_cable_detect(hwif);
+ u8 ultra_66 = (id->dma_ultra & 0x0078) ? 1 : 0;
+ u8 cable = pdcnew_cable_detect(hwif);
+ u8 speed;
if (ultra_66 && cable) {
- printk(KERN_WARNING "Warning: %s channel requires an 80-pin cable for operation.\n", hwif->channel ? "Secondary":"Primary");
+ printk(KERN_WARNING "Warning: %s channel "
+ "requires an 80-pin cable for operation.\n",
+ hwif->channel ? "Secondary" : "Primary");
printk(KERN_WARNING "%s reduced to Ultra33 mode.\n", drive->name);
}
if (drive->media != ide_disk)
return 0;
- if (id->capability & 4) { /* IORDY_EN & PREFETCH_EN */
- hwif->OUTB((0x13 + ((drive->dn%2) ? 0x08 : 0x00)), hwif->dma_vendor1);
- hwif->OUTB((hwif->INB(hwif->dma_vendor3)|0x03), hwif->dma_vendor3);
+
+ if (id->capability & 4) {
+ /*
+ * Set IORDY_EN & PREFETCH_EN (this seems to have
+ * NO real effect since this register is reloaded
+ * by hardware when the transfer mode is selected)
+ */
+ u8 tmp, adj = (drive->dn & 1) ? 0x08 : 0x00;
+
+ tmp = get_indexed_reg(hwif, 0x13 + adj);
+ set_indexed_reg(hwif, 0x13 + adj, tmp | 0x03);
}
speed = ide_dma_speed(drive, pdcnew_ratemask(drive));
- if (!(speed)) {
- hwif->tuneproc(drive, 5);
+ if (!speed)
return 0;
- }
(void) hwif->speedproc(drive, speed);
return ide_dma_enable(drive);
}
-static int pdcnew_config_drive_xfer_rate (ide_drive_t *drive)
+static int pdcnew_config_drive_xfer_rate(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
struct hd_driveid *id = drive->id;
@@ -234,16 +324,16 @@ static int pdcnew_config_drive_xfer_rate (ide_drive_t *drive)
} else if ((id->capability & 8) || (id->field_valid & 2)) {
fast_ata_pio:
- hwif->tuneproc(drive, 5);
+ hwif->tuneproc(drive, 255);
return hwif->ide_dma_off_quietly(drive);
}
/* IORDY not supported */
return 0;
}
-static int pdcnew_quirkproc (ide_drive_t *drive)
+static int pdcnew_quirkproc(ide_drive_t *drive)
{
- return ((int) check_in_drive_lists(drive, pdc_quirk_drives));
+ return check_in_drive_lists(drive, pdc_quirk_drives);
}
static int pdcnew_ide_dma_lostirq(ide_drive_t *drive)
@@ -260,21 +350,100 @@ static int pdcnew_ide_dma_timeout(ide_drive_t *drive)
return __ide_dma_timeout(drive);
}
-static void pdcnew_new_reset (ide_drive_t *drive)
+static void pdcnew_reset(ide_drive_t *drive)
{
/*
* Deleted this because it is redundant from the caller.
*/
- printk(KERN_WARNING "PDC202XX: %s channel reset.\n",
+ printk(KERN_WARNING "pdc202xx_new: %s channel reset.\n",
HWIF(drive)->channel ? "Secondary" : "Primary");
}
+/**
+ * read_counter - Read the byte count registers
+ * @dma_base: for the port address
+ */
+static long __devinit read_counter(u32 dma_base)
+{
+ u32 pri_dma_base = dma_base, sec_dma_base = dma_base + 0x08;
+ u8 cnt0, cnt1, cnt2, cnt3;
+ long count = 0, last;
+ int retry = 3;
+
+ do {
+ last = count;
+
+ /* Read the current count */
+ outb(0x20, pri_dma_base + 0x01);
+ cnt0 = inb(pri_dma_base + 0x03);
+ outb(0x21, pri_dma_base + 0x01);
+ cnt1 = inb(pri_dma_base + 0x03);
+ outb(0x20, sec_dma_base + 0x01);
+ cnt2 = inb(sec_dma_base + 0x03);
+ outb(0x21, sec_dma_base + 0x01);
+ cnt3 = inb(sec_dma_base + 0x03);
+
+ count = (cnt3 << 23) | (cnt2 << 15) | (cnt1 << 8) | cnt0;
+
+ /*
+ * The 30-bit decrementing counter is read in 4 pieces.
+ * Incorrect value may be read when the most significant bytes
+ * are changing...
+ */
+ } while (retry-- && (((last ^ count) & 0x3fff8000) || last < count));
+
+ DBG("cnt0[%02X] cnt1[%02X] cnt2[%02X] cnt3[%02X]\n",
+ cnt0, cnt1, cnt2, cnt3);
+
+ return count;
+}
+
+/**
+ * detect_pll_input_clock - Detect the PLL input clock in Hz.
+ * @dma_base: for the port address
+ * E.g. 16949000 on 33 MHz PCI bus, i.e. half of the PCI clock.
+ */
+static long __devinit detect_pll_input_clock(unsigned long dma_base)
+{
+ long start_count, end_count;
+ long pll_input;
+ u8 scr1;
+
+ start_count = read_counter(dma_base);
+
+ /* Start the test mode */
+ outb(0x01, dma_base + 0x01);
+ scr1 = inb(dma_base + 0x03);
+ DBG("scr1[%02X]\n", scr1);
+ outb(scr1 | 0x40, dma_base + 0x03);
+
+ /* Let the counter run for 10 ms. */
+ mdelay(10);
+
+ end_count = read_counter(dma_base);
+
+ /* Stop the test mode */
+ outb(0x01, dma_base + 0x01);
+ scr1 = inb(dma_base + 0x03);
+ DBG("scr1[%02X]\n", scr1);
+ outb(scr1 & ~0x40, dma_base + 0x03);
+
+ /*
+ * Calculate the input clock in Hz
+ * (the clock counter is 30 bit wide and counts down)
+ */
+ pll_input = ((start_count - end_count) & 0x3ffffff) * 100;
+
+ DBG("start[%ld] end[%ld]\n", start_count, end_count);
+
+ return pll_input;
+}
+
#ifdef CONFIG_PPC_PMAC
static void __devinit apple_kiwi_init(struct pci_dev *pdev)
{
struct device_node *np = pci_device_to_OF_node(pdev);
unsigned int class_rev = 0;
- void __iomem *mmio;
u8 conf;
if (np == NULL || !device_is_compatible(np, "kiwi-root"))
@@ -285,30 +454,20 @@ static void __devinit apple_kiwi_init(struct pci_dev *pdev)
if (class_rev >= 0x03) {
/* Setup chip magic config stuff (from darwin) */
- pci_read_config_byte(pdev, 0x40, &conf);
- pci_write_config_byte(pdev, 0x40, conf | 0x01);
- }
- mmio = ioremap(pci_resource_start(pdev, 5),
- pci_resource_len(pdev, 5));
-
- /* Setup some PLL stuffs */
- switch (pdev->device) {
- case PCI_DEVICE_ID_PROMISE_20270:
- writew(0x0d2b, mmio + 0x1202);
- mdelay(30);
- break;
- case PCI_DEVICE_ID_PROMISE_20271:
- writew(0x0826, mmio + 0x1202);
- mdelay(30);
- break;
+ pci_read_config_byte (pdev, 0x40, &conf);
+ pci_write_config_byte(pdev, 0x40, (conf | 0x01));
}
-
- iounmap(mmio);
}
#endif /* CONFIG_PPC_PMAC */
static unsigned int __devinit init_chipset_pdcnew(struct pci_dev *dev, const char *name)
{
+ unsigned long dma_base = pci_resource_start(dev, 4);
+ unsigned long sec_dma_base = dma_base + 0x08;
+ long pll_input, pll_output, ratio;
+ int f, r;
+ u8 pll_ctl0, pll_ctl1;
+
if (dev->resource[PCI_ROM_RESOURCE].start) {
pci_write_config_dword(dev, PCI_ROM_ADDRESS,
dev->resource[PCI_ROM_RESOURCE].start | PCI_ROM_ADDRESS_ENABLE);
@@ -320,6 +479,106 @@ static unsigned int __devinit init_chipset_pdcnew(struct pci_dev *dev, const cha
apple_kiwi_init(dev);
#endif
+ /* Calculate the required PLL output frequency */
+ switch(max_dma_rate(dev)) {
+ case 4: /* it's 133 MHz for Ultra133 chips */
+ pll_output = 133333333;
+ break;
+ case 3: /* and 100 MHz for Ultra100 chips */
+ default:
+ pll_output = 100000000;
+ break;
+ }
+
+ /*
+ * Detect PLL input clock.
+ * On some systems, where PCI bus is running at non-standard clock rate
+ * (e.g. 25 or 40 MHz), we have to adjust the cycle time.
+ * PDC20268 and newer chips employ PLL circuit to help correct timing
+ * registers setting.
+ */
+ pll_input = detect_pll_input_clock(dma_base);
+ printk("%s: PLL input clock is %ld kHz\n", name, pll_input / 1000);
+
+ /* Sanity check */
+ if (unlikely(pll_input < 5000000L || pll_input > 70000000L)) {
+ printk(KERN_ERR "%s: Bad PLL input clock %ld Hz, giving up!\n",
+ name, pll_input);
+ goto out;
+ }
+
+#ifdef DEBUG
+ DBG("pll_output is %ld Hz\n", pll_output);
+
+ /* Show the current clock value of PLL control register
+ * (maybe already configured by the BIOS)
+ */
+ outb(0x02, sec_dma_base + 0x01);
+ pll_ctl0 = inb(sec_dma_base + 0x03);
+ outb(0x03, sec_dma_base + 0x01);
+ pll_ctl1 = inb(sec_dma_base + 0x03);
+
+ DBG("pll_ctl[%02X][%02X]\n", pll_ctl0, pll_ctl1);
+#endif
+
+ /*
+ * Calculate the ratio of F, R and NO
+ * POUT = (F + 2) / (( R + 2) * NO)
+ */
+ ratio = pll_output / (pll_input / 1000);
+ if (ratio < 8600L) { /* 8.6x */
+ /* Using NO = 0x01, R = 0x0d */
+ r = 0x0d;
+ } else if (ratio < 12900L) { /* 12.9x */
+ /* Using NO = 0x01, R = 0x08 */
+ r = 0x08;
+ } else if (ratio < 16100L) { /* 16.1x */
+ /* Using NO = 0x01, R = 0x06 */
+ r = 0x06;
+ } else if (ratio < 64000L) { /* 64x */
+ r = 0x00;
+ } else {
+ /* Invalid ratio */
+ printk(KERN_ERR "%s: Bad ratio %ld, giving up!\n", name, ratio);
+ goto out;
+ }
+
+ f = (ratio * (r + 2)) / 1000 - 2;
+
+ DBG("F[%d] R[%d] ratio*1000[%ld]\n", f, r, ratio);
+
+ if (unlikely(f < 0 || f > 127)) {
+ /* Invalid F */
+ printk(KERN_ERR "%s: F[%d] invalid!\n", name, f);
+ goto out;
+ }
+
+ pll_ctl0 = (u8) f;
+ pll_ctl1 = (u8) r;
+
+ DBG("Writing pll_ctl[%02X][%02X]\n", pll_ctl0, pll_ctl1);
+
+ outb(0x02, sec_dma_base + 0x01);
+ outb(pll_ctl0, sec_dma_base + 0x03);
+ outb(0x03, sec_dma_base + 0x01);
+ outb(pll_ctl1, sec_dma_base + 0x03);
+
+ /* Wait the PLL circuit to be stable */
+ mdelay(30);
+
+#ifdef DEBUG
+ /*
+ * Show the current clock value of PLL control register
+ */
+ outb(0x02, sec_dma_base + 0x01);
+ pll_ctl0 = inb(sec_dma_base + 0x03);
+ outb(0x03, sec_dma_base + 0x01);
+ pll_ctl1 = inb(sec_dma_base + 0x03);
+
+ DBG("pll_ctl[%02X][%02X]\n", pll_ctl0, pll_ctl1);
+#endif
+
+ out:
return dev->irq;
}
@@ -329,8 +588,8 @@ static void __devinit init_hwif_pdc202new(ide_hwif_t *hwif)
hwif->tuneproc = &pdcnew_tune_drive;
hwif->quirkproc = &pdcnew_quirkproc;
- hwif->speedproc = &pdcnew_new_tune_chipset;
- hwif->resetproc = &pdcnew_new_reset;
+ hwif->speedproc = &pdcnew_tune_chipset;
+ hwif->resetproc = &pdcnew_reset;
hwif->drives[0].autotune = hwif->drives[1].autotune = 1;
@@ -342,11 +601,14 @@ static void __devinit init_hwif_pdc202new(ide_hwif_t *hwif)
hwif->ide_dma_check = &pdcnew_config_drive_xfer_rate;
hwif->ide_dma_lostirq = &pdcnew_ide_dma_lostirq;
hwif->ide_dma_timeout = &pdcnew_ide_dma_timeout;
- if (!(hwif->udma_four))
- hwif->udma_four = (pdcnew_new_cable_detect(hwif)) ? 0 : 1;
+
+ if (!hwif->udma_four)
+ hwif->udma_four = pdcnew_cable_detect(hwif) ? 0 : 1;
+
if (!noautodma)
hwif->autodma = 1;
hwif->drives[0].autodma = hwif->drives[1].autodma = hwif->autodma;
+
#if PDC202_DEBUG_CABLE
printk(KERN_DEBUG "%s: %s-pin cable\n",
hwif->name, hwif->udma_four ? "80" : "40");
@@ -362,6 +624,7 @@ static int __devinit init_setup_pdc20270(struct pci_dev *dev,
ide_pci_device_t *d)
{
struct pci_dev *findev = NULL;
+ int ret;
if ((dev->bus->self &&
dev->bus->self->vendor == PCI_VENDOR_ID_DEC) &&
@@ -369,14 +632,16 @@ static int __devinit init_setup_pdc20270(struct pci_dev *dev,
if (PCI_SLOT(dev->devfn) & 2)
return -ENODEV;
d->extra = 0;
- while ((findev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, findev)) != NULL) {
+ while ((findev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, findev)) != NULL) {
if ((findev->vendor == dev->vendor) &&
(findev->device == dev->device) &&
(PCI_SLOT(findev->devfn) & 2)) {
if (findev->irq != dev->irq) {
findev->irq = dev->irq;
}
- return ide_setup_pci_devices(dev, findev, d);
+ ret = ide_setup_pci_devices(dev, findev, d);
+ pci_dev_put(findev);
+ return ret;
}
}
}
diff --git a/drivers/ide/pci/piix.c b/drivers/ide/pci/piix.c
index cdc3aab9ebcb..b1e9a8eba6b6 100644
--- a/drivers/ide/pci/piix.c
+++ b/drivers/ide/pci/piix.c
@@ -505,6 +505,10 @@ static void __devinit init_hwif_piix(ide_hwif_t *hwif)
/* This is a painful system best to let it self tune for now */
return;
}
+ /* ESB2 appears to generate spurious DMA interrupts in PIO mode
+ when in native mode */
+ if (hwif->pci_dev->device == PCI_DEVICE_ID_INTEL_ESB2_18)
+ hwif->atapi_irq_bogon = 1;
hwif->autodma = 0;
hwif->tuneproc = &piix_tune_drive;
diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c
index f3fe287fbd89..cfad09accf52 100644
--- a/drivers/ide/pci/sgiioc4.c
+++ b/drivers/ide/pci/sgiioc4.c
@@ -768,14 +768,7 @@ ioc4_ide_init(void)
return ioc4_register_submodule(&ioc4_ide_submodule);
}
-static void __devexit
-ioc4_ide_exit(void)
-{
- ioc4_unregister_submodule(&ioc4_ide_submodule);
-}
-
-module_init(ioc4_ide_init);
-module_exit(ioc4_ide_exit);
+late_initcall(ioc4_ide_init); /* Call only after IDE init is done */
MODULE_AUTHOR("Aniket Malatpure/Jeremy Higdon");
MODULE_DESCRIPTION("IDE PCI driver module for SGI IOC4 Base-IO Card");
diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c
index 92edf76bd7ad..6b313139b5e4 100644
--- a/drivers/ide/pci/sis5513.c
+++ b/drivers/ide/pci/sis5513.c
@@ -800,9 +800,10 @@ static unsigned int __devinit init_chipset_sis5513 (struct pci_dev *dev, const c
if (trueid == 0x5517) { /* SiS 961/961B */
- lpc_bridge = pci_find_slot(0x00, 0x10); /* Bus 0, Dev 2, Fn 0 */
+ lpc_bridge = pci_get_slot(dev->bus, 0x10); /* Bus 0, Dev 2, Fn 0 */
pci_read_config_byte(lpc_bridge, PCI_REVISION_ID, &sbrev);
pci_read_config_byte(dev, 0x49, &prefctl);
+ pci_dev_put(lpc_bridge);
if (sbrev == 0x10 && (prefctl & 0x80)) {
printk(KERN_INFO "SIS5513: SiS 961B MuTIOL IDE UDMA133 controller\n");
diff --git a/drivers/ide/pci/sl82c105.c b/drivers/ide/pci/sl82c105.c
index 0b4b60498515..5afefe8692fe 100644
--- a/drivers/ide/pci/sl82c105.c
+++ b/drivers/ide/pci/sl82c105.c
@@ -299,14 +299,14 @@ static void sl82c105_selectproc(ide_drive_t *drive)
//DBG(("sl82c105_selectproc(drive:%s)\n", drive->name));
mask = hwif->channel ? CTRL_P1F16 : CTRL_P0F16;
- old = val = *((u32 *)&hwif->hwif_data);
+ old = val = (u32)pci_get_drvdata(dev);
if (drive->using_dma)
val &= ~mask;
else
val |= mask;
if (old != val) {
pci_write_config_dword(dev, 0x40, val);
- *((u32 *)&hwif->hwif_data) = val;
+ pci_set_drvdata(dev, (void *)val);
}
}
@@ -316,14 +316,13 @@ static void sl82c105_selectproc(ide_drive_t *drive)
*/
static void sl82c105_resetproc(ide_drive_t *drive)
{
- ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = HWIF(drive)->pci_dev;
u32 val;
DBG(("sl82c105_resetproc(drive:%s)\n", drive->name));
pci_read_config_dword(dev, 0x40, &val);
- *((u32 *)&hwif->hwif_data) = val;
+ pci_set_drvdata(dev, (void *)val);
}
/*
@@ -394,6 +393,7 @@ static unsigned int __devinit init_chipset_sl82c105(struct pci_dev *dev, const c
pci_read_config_dword(dev, 0x40, &val);
val |= CTRL_P0EN | CTRL_P0F16 | CTRL_P1F16;
pci_write_config_dword(dev, 0x40, val);
+ pci_set_drvdata(dev, (void *)val);
return dev->irq;
}
@@ -404,30 +404,25 @@ static unsigned int __devinit init_chipset_sl82c105(struct pci_dev *dev, const c
static void __devinit init_hwif_sl82c105(ide_hwif_t *hwif)
{
- struct pci_dev *dev = hwif->pci_dev;
unsigned int rev;
u8 dma_state;
- u32 val;
-
+
DBG(("init_hwif_sl82c105(hwif: ide%d)\n", hwif->index));
hwif->tuneproc = tune_sl82c105;
hwif->selectproc = sl82c105_selectproc;
hwif->resetproc = sl82c105_resetproc;
-
- /* Default to PIO 0 for fallback unless tuned otherwise,
- * we always autotune PIO, this is done before DMA is
- * checked, so there is no risk of accidentally disabling
- * DMA
- */
+
+ /*
+ * Default to PIO 0 for fallback unless tuned otherwise.
+ * We always autotune PIO, this is done before DMA is checked,
+ * so there's no risk of accidentally disabling DMA
+ */
hwif->drives[0].pio_speed = XFER_PIO_0;
hwif->drives[0].autotune = 1;
- hwif->drives[1].pio_speed = XFER_PIO_1;
+ hwif->drives[1].pio_speed = XFER_PIO_0;
hwif->drives[1].autotune = 1;
- pci_read_config_dword(dev, 0x40, &val);
- *((u32 *)&hwif->hwif_data) = val;
-
hwif->atapi_dma = 0;
hwif->mwdma_mask = 0;
hwif->swdma_mask = 0;
diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c
index 2af634d7acf4..61f1a9665a7f 100644
--- a/drivers/ide/pci/via82cxxx.c
+++ b/drivers/ide/pci/via82cxxx.c
@@ -35,7 +35,7 @@
#include <linux/ide.h>
#include <asm/io.h>
-#ifdef CONFIG_PPC_MULTIPLATFORM
+#ifdef CONFIG_PPC_CHRP
#include <asm/processor.h>
#endif
@@ -282,11 +282,11 @@ static unsigned int __devinit init_chipset_via82cxxx(struct pci_dev *dev, const
* Find the ISA bridge to see how good the IDE is.
*/
via_config = via_config_find(&isa);
- if (!via_config->id) {
- printk(KERN_WARNING "VP_IDE: Unknown VIA SouthBridge, disabling DMA.\n");
- pci_dev_put(isa);
- return -ENODEV;
- }
+
+ /* We checked this earlier so if it fails here deeep badness
+ is involved */
+
+ BUG_ON(!via_config->id);
/*
* Setup or disable Clk66 if appropriate
@@ -442,7 +442,7 @@ static void __devinit init_hwif_via82cxxx(ide_hwif_t *hwif)
hwif->speedproc = &via_set_drive;
-#if defined(CONFIG_PPC_CHRP) && defined(CONFIG_PPC32)
+#ifdef CONFIG_PPC_CHRP
if(machine_is(chrp) && _chrp_type == _CHRP_Pegasos) {
hwif->irq = hwif->channel ? 15 : 14;
}
@@ -494,6 +494,17 @@ static ide_pci_device_t via82cxxx_chipsets[] __devinitdata = {
static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
+ struct pci_dev *isa = NULL;
+ struct via_isa_bridge *via_config;
+ /*
+ * Find the ISA bridge and check we know what it is.
+ */
+ via_config = via_config_find(&isa);
+ pci_dev_put(isa);
+ if (!via_config->id) {
+ printk(KERN_WARNING "VP_IDE: Unknown VIA SouthBridge, disabling DMA.\n");
+ return -ENODEV;
+ }
return ide_setup_pci_device(dev, &via82cxxx_chipsets[id->driver_data]);
}
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-27 15:34:02 +0000