summaryrefslogtreecommitdiffstats
path: root/drivers/iio
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/iio')
-rw-r--r--drivers/iio/accel/st_accel_buffer.c2
-rw-r--r--drivers/iio/accel/st_accel_core.c1
-rw-r--r--drivers/iio/common/st_sensors/st_sensors_buffer.c25
-rw-r--r--drivers/iio/common/st_sensors/st_sensors_core.c3
-rw-r--r--drivers/iio/common/st_sensors/st_sensors_trigger.c88
-rw-r--r--drivers/iio/gyro/st_gyro_buffer.c2
-rw-r--r--drivers/iio/gyro/st_gyro_core.c1
-rw-r--r--drivers/iio/magnetometer/st_magn_buffer.c2
-rw-r--r--drivers/iio/magnetometer/st_magn_core.c1
-rw-r--r--drivers/iio/pressure/st_pressure_buffer.c2
-rw-r--r--drivers/iio/pressure/st_pressure_core.c1
11 files changed, 103 insertions, 25 deletions
diff --git a/drivers/iio/accel/st_accel_buffer.c b/drivers/iio/accel/st_accel_buffer.c
index a1e642ee13d6..7fddc137e91e 100644
--- a/drivers/iio/accel/st_accel_buffer.c
+++ b/drivers/iio/accel/st_accel_buffer.c
@@ -91,7 +91,7 @@ static const struct iio_buffer_setup_ops st_accel_buffer_setup_ops = {
int st_accel_allocate_ring(struct iio_dev *indio_dev)
{
- return iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
+ return iio_triggered_buffer_setup(indio_dev, NULL,
&st_sensors_trigger_handler, &st_accel_buffer_setup_ops);
}
diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
index dc73f2d85e6d..4d95bfc4786c 100644
--- a/drivers/iio/accel/st_accel_core.c
+++ b/drivers/iio/accel/st_accel_core.c
@@ -741,6 +741,7 @@ static const struct iio_info accel_info = {
static const struct iio_trigger_ops st_accel_trigger_ops = {
.owner = THIS_MODULE,
.set_trigger_state = ST_ACCEL_TRIGGER_SET_STATE,
+ .validate_device = st_sensors_validate_device,
};
#define ST_ACCEL_TRIGGER_OPS (&st_accel_trigger_ops)
#else
diff --git a/drivers/iio/common/st_sensors/st_sensors_buffer.c b/drivers/iio/common/st_sensors/st_sensors_buffer.c
index c55898543a47..f1693dbebb8a 100644
--- a/drivers/iio/common/st_sensors/st_sensors_buffer.c
+++ b/drivers/iio/common/st_sensors/st_sensors_buffer.c
@@ -57,31 +57,20 @@ irqreturn_t st_sensors_trigger_handler(int irq, void *p)
struct iio_poll_func *pf = p;
struct iio_dev *indio_dev = pf->indio_dev;
struct st_sensor_data *sdata = iio_priv(indio_dev);
+ s64 timestamp;
- /* If we have a status register, check if this IRQ came from us */
- if (sdata->sensor_settings->drdy_irq.addr_stat_drdy) {
- u8 status;
-
- len = sdata->tf->read_byte(&sdata->tb, sdata->dev,
- sdata->sensor_settings->drdy_irq.addr_stat_drdy,
- &status);
- if (len < 0)
- dev_err(sdata->dev, "could not read channel status\n");
-
- /*
- * If this was not caused by any channels on this sensor,
- * return IRQ_NONE
- */
- if (!(status & (u8)indio_dev->active_scan_mask[0]))
- return IRQ_NONE;
- }
+ /* If we do timetamping here, do it before reading the values */
+ if (sdata->hw_irq_trigger)
+ timestamp = sdata->hw_timestamp;
+ else
+ timestamp = iio_get_time_ns();
len = st_sensors_get_buffer_element(indio_dev, sdata->buffer_data);
if (len < 0)
goto st_sensors_get_buffer_element_error;
iio_push_to_buffers_with_timestamp(indio_dev, sdata->buffer_data,
- pf->timestamp);
+ timestamp);
st_sensors_get_buffer_element_error:
iio_trigger_notify_done(indio_dev->trig);
diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c
index dffe00692169..928ee68fcc5f 100644
--- a/drivers/iio/common/st_sensors/st_sensors_core.c
+++ b/drivers/iio/common/st_sensors/st_sensors_core.c
@@ -424,6 +424,9 @@ int st_sensors_set_dataready_irq(struct iio_dev *indio_dev, bool enable)
else
drdy_mask = sdata->sensor_settings->drdy_irq.mask_int2;
+ /* Flag to the poll function that the hardware trigger is in use */
+ sdata->hw_irq_trigger = enable;
+
/* Enable/Disable the interrupt generator for data ready. */
err = st_sensors_write_data_with_mask(indio_dev,
sdata->sensor_settings->drdy_irq.addr,
diff --git a/drivers/iio/common/st_sensors/st_sensors_trigger.c b/drivers/iio/common/st_sensors/st_sensors_trigger.c
index da72279fcf99..1f59bcc0f143 100644
--- a/drivers/iio/common/st_sensors/st_sensors_trigger.c
+++ b/drivers/iio/common/st_sensors/st_sensors_trigger.c
@@ -17,6 +17,73 @@
#include <linux/iio/common/st_sensors.h>
#include "st_sensors_core.h"
+/**
+ * st_sensors_irq_handler() - top half of the IRQ-based triggers
+ * @irq: irq number
+ * @p: private handler data
+ */
+irqreturn_t st_sensors_irq_handler(int irq, void *p)
+{
+ struct iio_trigger *trig = p;
+ struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
+ struct st_sensor_data *sdata = iio_priv(indio_dev);
+
+ /* Get the time stamp as close in time as possible */
+ sdata->hw_timestamp = iio_get_time_ns();
+ return IRQ_WAKE_THREAD;
+}
+
+/**
+ * st_sensors_irq_thread() - bottom half of the IRQ-based triggers
+ * @irq: irq number
+ * @p: private handler data
+ */
+irqreturn_t st_sensors_irq_thread(int irq, void *p)
+{
+ struct iio_trigger *trig = p;
+ struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
+ struct st_sensor_data *sdata = iio_priv(indio_dev);
+ int ret;
+
+ /*
+ * If this trigger is backed by a hardware interrupt and we have a
+ * status register, check if this IRQ came from us
+ */
+ if (sdata->sensor_settings->drdy_irq.addr_stat_drdy) {
+ u8 status;
+
+ ret = sdata->tf->read_byte(&sdata->tb, sdata->dev,
+ sdata->sensor_settings->drdy_irq.addr_stat_drdy,
+ &status);
+ if (ret < 0) {
+ dev_err(sdata->dev, "could not read channel status\n");
+ goto out_poll;
+ }
+ /*
+ * the lower bits of .active_scan_mask[0] is directly mapped
+ * to the channels on the sensor: either bit 0 for
+ * one-dimensional sensors, or e.g. x,y,z for accelerometers,
+ * gyroscopes or magnetometers. No sensor use more than 3
+ * channels, so cut the other status bits here.
+ */
+ status &= 0x07;
+
+ /*
+ * If this was not caused by any channels on this sensor,
+ * return IRQ_NONE
+ */
+ if (!indio_dev->active_scan_mask)
+ return IRQ_NONE;
+ if (!(status & (u8)indio_dev->active_scan_mask[0]))
+ return IRQ_NONE;
+ }
+
+out_poll:
+ /* It's our IRQ: proceed to handle the register polling */
+ iio_trigger_poll_chained(p);
+ return IRQ_HANDLED;
+}
+
int st_sensors_allocate_trigger(struct iio_dev *indio_dev,
const struct iio_trigger_ops *trigger_ops)
{
@@ -77,9 +144,12 @@ int st_sensors_allocate_trigger(struct iio_dev *indio_dev,
sdata->sensor_settings->drdy_irq.addr_stat_drdy)
irq_trig |= IRQF_SHARED;
- err = request_threaded_irq(irq,
- iio_trigger_generic_data_rdy_poll,
- NULL,
+ /* Let's create an interrupt thread masking the hard IRQ here */
+ irq_trig |= IRQF_ONESHOT;
+
+ err = request_threaded_irq(sdata->get_irq_data_ready(indio_dev),
+ st_sensors_irq_handler,
+ st_sensors_irq_thread,
irq_trig,
sdata->trig->name,
sdata->trig);
@@ -119,6 +189,18 @@ void st_sensors_deallocate_trigger(struct iio_dev *indio_dev)
}
EXPORT_SYMBOL(st_sensors_deallocate_trigger);
+int st_sensors_validate_device(struct iio_trigger *trig,
+ struct iio_dev *indio_dev)
+{
+ struct iio_dev *indio = iio_trigger_get_drvdata(trig);
+
+ if (indio != indio_dev)
+ return -EINVAL;
+
+ return 0;
+}
+EXPORT_SYMBOL(st_sensors_validate_device);
+
MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
MODULE_DESCRIPTION("STMicroelectronics ST-sensors trigger");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/gyro/st_gyro_buffer.c b/drivers/iio/gyro/st_gyro_buffer.c
index d67b17b6a7aa..a5377044e42f 100644
--- a/drivers/iio/gyro/st_gyro_buffer.c
+++ b/drivers/iio/gyro/st_gyro_buffer.c
@@ -91,7 +91,7 @@ static const struct iio_buffer_setup_ops st_gyro_buffer_setup_ops = {
int st_gyro_allocate_ring(struct iio_dev *indio_dev)
{
- return iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
+ return iio_triggered_buffer_setup(indio_dev, NULL,
&st_sensors_trigger_handler, &st_gyro_buffer_setup_ops);
}
diff --git a/drivers/iio/gyro/st_gyro_core.c b/drivers/iio/gyro/st_gyro_core.c
index 52a3c87c375c..a8012955a1f6 100644
--- a/drivers/iio/gyro/st_gyro_core.c
+++ b/drivers/iio/gyro/st_gyro_core.c
@@ -409,6 +409,7 @@ static const struct iio_info gyro_info = {
static const struct iio_trigger_ops st_gyro_trigger_ops = {
.owner = THIS_MODULE,
.set_trigger_state = ST_GYRO_TRIGGER_SET_STATE,
+ .validate_device = st_sensors_validate_device,
};
#define ST_GYRO_TRIGGER_OPS (&st_gyro_trigger_ops)
#else
diff --git a/drivers/iio/magnetometer/st_magn_buffer.c b/drivers/iio/magnetometer/st_magn_buffer.c
index ecd3bd0a9769..0a9e8fadfa9d 100644
--- a/drivers/iio/magnetometer/st_magn_buffer.c
+++ b/drivers/iio/magnetometer/st_magn_buffer.c
@@ -82,7 +82,7 @@ static const struct iio_buffer_setup_ops st_magn_buffer_setup_ops = {
int st_magn_allocate_ring(struct iio_dev *indio_dev)
{
- return iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
+ return iio_triggered_buffer_setup(indio_dev, NULL,
&st_sensors_trigger_handler, &st_magn_buffer_setup_ops);
}
diff --git a/drivers/iio/magnetometer/st_magn_core.c b/drivers/iio/magnetometer/st_magn_core.c
index 62036d2a9956..8250fc322c56 100644
--- a/drivers/iio/magnetometer/st_magn_core.c
+++ b/drivers/iio/magnetometer/st_magn_core.c
@@ -572,6 +572,7 @@ static const struct iio_info magn_info = {
static const struct iio_trigger_ops st_magn_trigger_ops = {
.owner = THIS_MODULE,
.set_trigger_state = ST_MAGN_TRIGGER_SET_STATE,
+ .validate_device = st_sensors_validate_device,
};
#define ST_MAGN_TRIGGER_OPS (&st_magn_trigger_ops)
#else
diff --git a/drivers/iio/pressure/st_pressure_buffer.c b/drivers/iio/pressure/st_pressure_buffer.c
index 2ff53f222352..99468d0a64e7 100644
--- a/drivers/iio/pressure/st_pressure_buffer.c
+++ b/drivers/iio/pressure/st_pressure_buffer.c
@@ -82,7 +82,7 @@ static const struct iio_buffer_setup_ops st_press_buffer_setup_ops = {
int st_press_allocate_ring(struct iio_dev *indio_dev)
{
- return iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
+ return iio_triggered_buffer_setup(indio_dev, NULL,
&st_sensors_trigger_handler, &st_press_buffer_setup_ops);
}
diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c
index 257b58ac6779..92a118c3c4ac 100644
--- a/drivers/iio/pressure/st_pressure_core.c
+++ b/drivers/iio/pressure/st_pressure_core.c
@@ -445,6 +445,7 @@ static const struct iio_info press_info = {
static const struct iio_trigger_ops st_press_trigger_ops = {
.owner = THIS_MODULE,
.set_trigger_state = ST_PRESS_TRIGGER_SET_STATE,
+ .validate_device = st_sensors_validate_device,
};
#define ST_PRESS_TRIGGER_OPS (&st_press_trigger_ops)
#else
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-26 04:21:12 +0000