diff options
Diffstat (limited to 'drivers/input/mouse')
| -rw-r--r-- | drivers/input/mouse/Kconfig | 12 | ||||
| -rw-r--r-- | drivers/input/mouse/Makefile | 1 | ||||
| -rw-r--r-- | drivers/input/mouse/alps.c | 81 | ||||
| -rw-r--r-- | drivers/input/mouse/alps.h | 2 | ||||
| -rw-r--r-- | drivers/input/mouse/navpoint.c | 369 | ||||
| -rw-r--r-- | drivers/input/mouse/sentelic.c | 34 | ||||
| -rw-r--r-- | drivers/input/mouse/sentelic.h | 8 | ||||
| -rw-r--r-- | drivers/input/mouse/sermouse.c | 13 | ||||
| -rw-r--r-- | drivers/input/mouse/synaptics.c | 20 | ||||
| -rw-r--r-- | drivers/input/mouse/vsxxxaa.c | 14 |
10 files changed, 505 insertions, 49 deletions
diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig index 9b8db821d5f0..cd6268cf7cd5 100644 --- a/drivers/input/mouse/Kconfig +++ b/drivers/input/mouse/Kconfig @@ -339,4 +339,16 @@ config MOUSE_SYNAPTICS_USB To compile this driver as a module, choose M here: the module will be called synaptics_usb. +config MOUSE_NAVPOINT_PXA27x + tristate "Synaptics NavPoint (PXA27x SSP/SPI)" + depends on PXA27x && PXA_SSP + help + This driver adds support for the Synaptics NavPoint touchpad connected + to a PXA27x SSP port in SPI slave mode. The device emulates a mouse; + a tap or tap-and-a-half drag gesture emulates the left mouse button. + For example, use the xf86-input-evdev driver for an X pointing device. + + To compile this driver as a module, choose M here: the + module will be called navpoint. + endif diff --git a/drivers/input/mouse/Makefile b/drivers/input/mouse/Makefile index 4718effeb8d9..46ba7556fd4f 100644 --- a/drivers/input/mouse/Makefile +++ b/drivers/input/mouse/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_MOUSE_GPIO) += gpio_mouse.o obj-$(CONFIG_MOUSE_INPORT) += inport.o obj-$(CONFIG_MOUSE_LOGIBM) += logibm.o obj-$(CONFIG_MOUSE_MAPLE) += maplemouse.o +obj-$(CONFIG_MOUSE_NAVPOINT_PXA27x) += navpoint.o obj-$(CONFIG_MOUSE_PC110PAD) += pc110pad.o obj-$(CONFIG_MOUSE_PS2) += psmouse.o obj-$(CONFIG_MOUSE_PXA930_TRKBALL) += pxa930_trkball.o diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index 4c6a72d3d48c..4a1347e91bdc 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -553,10 +553,7 @@ static void alps_process_touchpad_packet_v3(struct psmouse *psmouse) alps_report_semi_mt_data(dev, fingers, x1, y1, x2, y2); - input_report_key(dev, BTN_TOOL_FINGER, fingers == 1); - input_report_key(dev, BTN_TOOL_DOUBLETAP, fingers == 2); - input_report_key(dev, BTN_TOOL_TRIPLETAP, fingers == 3); - input_report_key(dev, BTN_TOOL_QUADTAP, fingers == 4); + input_mt_report_finger_count(dev, fingers); input_report_key(dev, BTN_LEFT, left); input_report_key(dev, BTN_RIGHT, right); @@ -604,10 +601,54 @@ static void alps_process_packet_v3(struct psmouse *psmouse) static void alps_process_packet_v4(struct psmouse *psmouse) { + struct alps_data *priv = psmouse->private; unsigned char *packet = psmouse->packet; struct input_dev *dev = psmouse->dev; + int offset; int x, y, z; int left, right; + int x1, y1, x2, y2; + int fingers = 0; + unsigned int x_bitmap, y_bitmap; + + /* + * v4 has a 6-byte encoding for bitmap data, but this data is + * broken up between 3 normal packets. Use priv->multi_packet to + * track our position in the bitmap packet. + */ + if (packet[6] & 0x40) { + /* sync, reset position */ + priv->multi_packet = 0; + } + + if (WARN_ON_ONCE(priv->multi_packet > 2)) + return; + + offset = 2 * priv->multi_packet; + priv->multi_data[offset] = packet[6]; + priv->multi_data[offset + 1] = packet[7]; + + if (++priv->multi_packet > 2) { + priv->multi_packet = 0; + + x_bitmap = ((priv->multi_data[2] & 0x1f) << 10) | + ((priv->multi_data[3] & 0x60) << 3) | + ((priv->multi_data[0] & 0x3f) << 2) | + ((priv->multi_data[1] & 0x60) >> 5); + y_bitmap = ((priv->multi_data[5] & 0x01) << 10) | + ((priv->multi_data[3] & 0x1f) << 5) | + (priv->multi_data[1] & 0x1f); + + fingers = alps_process_bitmap(x_bitmap, y_bitmap, + &x1, &y1, &x2, &y2); + + /* Store MT data.*/ + priv->fingers = fingers; + priv->x1 = x1; + priv->x2 = x2; + priv->y1 = y1; + priv->y2 = y2; + } left = packet[4] & 0x01; right = packet[4] & 0x02; @@ -617,21 +658,41 @@ static void alps_process_packet_v4(struct psmouse *psmouse) y = ((packet[2] & 0x7f) << 4) | (packet[3] & 0x0f); z = packet[5] & 0x7f; + /* + * If there were no contacts in the bitmap, use ST + * points in MT reports. + * If there were two contacts or more, report MT data. + */ + if (priv->fingers < 2) { + x1 = x; + y1 = y; + fingers = z > 0 ? 1 : 0; + } else { + fingers = priv->fingers; + x1 = priv->x1; + x2 = priv->x2; + y1 = priv->y1; + y2 = priv->y2; + } + if (z >= 64) input_report_key(dev, BTN_TOUCH, 1); else input_report_key(dev, BTN_TOUCH, 0); + alps_report_semi_mt_data(dev, fingers, x1, y1, x2, y2); + + input_mt_report_finger_count(dev, fingers); + + input_report_key(dev, BTN_LEFT, left); + input_report_key(dev, BTN_RIGHT, right); + if (z > 0) { input_report_abs(dev, ABS_X, x); input_report_abs(dev, ABS_Y, y); } input_report_abs(dev, ABS_PRESSURE, z); - input_report_key(dev, BTN_TOOL_FINGER, z > 0); - input_report_key(dev, BTN_LEFT, left); - input_report_key(dev, BTN_RIGHT, right); - input_sync(dev); } @@ -1557,6 +1618,7 @@ int alps_init(struct psmouse *psmouse) input_set_abs_params(dev1, ABS_Y, 0, 767, 0, 0); break; case ALPS_PROTO_V3: + case ALPS_PROTO_V4: set_bit(INPUT_PROP_SEMI_MT, dev1->propbit); input_mt_init_slots(dev1, 2); input_set_abs_params(dev1, ABS_MT_POSITION_X, 0, ALPS_V3_X_MAX, 0, 0); @@ -1565,8 +1627,7 @@ int alps_init(struct psmouse *psmouse) set_bit(BTN_TOOL_DOUBLETAP, dev1->keybit); set_bit(BTN_TOOL_TRIPLETAP, dev1->keybit); set_bit(BTN_TOOL_QUADTAP, dev1->keybit); - /* fall through */ - case ALPS_PROTO_V4: + input_set_abs_params(dev1, ABS_X, 0, ALPS_V3_X_MAX, 0, 0); input_set_abs_params(dev1, ABS_Y, 0, ALPS_V3_Y_MAX, 0, 0); break; diff --git a/drivers/input/mouse/alps.h b/drivers/input/mouse/alps.h index a00a4ab92a0f..ae1ac354c778 100644 --- a/drivers/input/mouse/alps.h +++ b/drivers/input/mouse/alps.h @@ -39,6 +39,8 @@ struct alps_data { int prev_fin; /* Finger bit from previous packet */ int multi_packet; /* Multi-packet data in progress */ unsigned char multi_data[6]; /* Saved multi-packet data */ + int x1, x2, y1, y2; /* Coordinates from last MT report */ + int fingers; /* Number of fingers from MT report */ u8 quirks; struct timer_list timer; }; diff --git a/drivers/input/mouse/navpoint.c b/drivers/input/mouse/navpoint.c new file mode 100644 index 000000000000..c29ae7654d5e --- /dev/null +++ b/drivers/input/mouse/navpoint.c @@ -0,0 +1,369 @@ +/* + * Synaptics NavPoint (PXA27x SSP/SPI) driver. + * + * Copyright (C) 2012 Paul Parsons <lost.distance@yahoo.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/gpio.h> +#include <linux/input.h> +#include <linux/input/navpoint.h> +#include <linux/interrupt.h> +#include <linux/mutex.h> +#include <linux/pxa2xx_ssp.h> +#include <linux/slab.h> + +/* + * Synaptics Modular Embedded Protocol: Module Packet Format. + * Module header byte 2:0 = Length (# bytes that follow) + * Module header byte 4:3 = Control + * Module header byte 7:5 = Module Address + */ +#define HEADER_LENGTH(byte) ((byte) & 0x07) +#define HEADER_CONTROL(byte) (((byte) >> 3) & 0x03) +#define HEADER_ADDRESS(byte) ((byte) >> 5) + +struct navpoint { + struct ssp_device *ssp; + struct input_dev *input; + struct device *dev; + int gpio; + int index; + u8 data[1 + HEADER_LENGTH(0xff)]; +}; + +/* + * Initialization values for SSCR0_x, SSCR1_x, SSSR_x. + */ +static const u32 sscr0 = 0 + | SSCR0_TUM /* TIM = 1; No TUR interrupts */ + | SSCR0_RIM /* RIM = 1; No ROR interrupts */ + | SSCR0_SSE /* SSE = 1; SSP enabled */ + | SSCR0_Motorola /* FRF = 0; Motorola SPI */ + | SSCR0_DataSize(16) /* DSS = 15; Data size = 16-bit */ + ; +static const u32 sscr1 = 0 + | SSCR1_SCFR /* SCFR = 1; SSPSCLK only during transfers */ + | SSCR1_SCLKDIR /* SCLKDIR = 1; Slave mode */ + | SSCR1_SFRMDIR /* SFRMDIR = 1; Slave mode */ + | SSCR1_RWOT /* RWOT = 1; Receive without transmit mode */ + | SSCR1_RxTresh(1) /* RFT = 0; Receive FIFO threshold = 1 */ + | SSCR1_SPH /* SPH = 1; SSPSCLK inactive 0.5 + 1 cycles */ + | SSCR1_RIE /* RIE = 1; Receive FIFO interrupt enabled */ + ; +static const u32 sssr = 0 + | SSSR_BCE /* BCE = 1; Clear BCE */ + | SSSR_TUR /* TUR = 1; Clear TUR */ + | SSSR_EOC /* EOC = 1; Clear EOC */ + | SSSR_TINT /* TINT = 1; Clear TINT */ + | SSSR_PINT /* PINT = 1; Clear PINT */ + | SSSR_ROR /* ROR = 1; Clear ROR */ + ; + +/* + * MEP Query $22: Touchpad Coordinate Range Query is not supported by + * the NavPoint module, so sampled values provide the default limits. + */ +#define NAVPOINT_X_MIN 1278 +#define NAVPOINT_X_MAX 5340 +#define NAVPOINT_Y_MIN 1572 +#define NAVPOINT_Y_MAX 4396 +#define NAVPOINT_PRESSURE_MIN 0 +#define NAVPOINT_PRESSURE_MAX 255 + +static void navpoint_packet(struct navpoint *navpoint) +{ + int finger; + int gesture; + int x, y, z; + + switch (navpoint->data[0]) { + case 0xff: /* Garbage (packet?) between reset and Hello packet */ + case 0x00: /* Module 0, NULL packet */ + break; + + case 0x0e: /* Module 0, Absolute packet */ + finger = (navpoint->data[1] & 0x01); + gesture = (navpoint->data[1] & 0x02); + x = ((navpoint->data[2] & 0x1f) << 8) | navpoint->data[3]; + y = ((navpoint->data[4] & 0x1f) << 8) | navpoint->data[5]; + z = navpoint->data[6]; + input_report_key(navpoint->input, BTN_TOUCH, finger); + input_report_abs(navpoint->input, ABS_X, x); + input_report_abs(navpoint->input, ABS_Y, y); + input_report_abs(navpoint->input, ABS_PRESSURE, z); + input_report_key(navpoint->input, BTN_TOOL_FINGER, finger); + input_report_key(navpoint->input, BTN_LEFT, gesture); + input_sync(navpoint->input); + break; + + case 0x19: /* Module 0, Hello packet */ + if ((navpoint->data[1] & 0xf0) == 0x10) + break; + /* FALLTHROUGH */ + default: + dev_warn(navpoint->dev, + "spurious packet: data=0x%02x,0x%02x,...\n", + navpoint->data[0], navpoint->data[1]); + break; + } +} + +static irqreturn_t navpoint_irq(int irq, void *dev_id) +{ + struct navpoint *navpoint = dev_id; + struct ssp_device *ssp = navpoint->ssp; + irqreturn_t ret = IRQ_NONE; + u32 status; + + status = pxa_ssp_read_reg(ssp, SSSR); + if (status & sssr) { + dev_warn(navpoint->dev, + "unexpected interrupt: status=0x%08x\n", status); + pxa_ssp_write_reg(ssp, SSSR, (status & sssr)); + ret = IRQ_HANDLED; + } + + while (status & SSSR_RNE) { + u32 data; + + data = pxa_ssp_read_reg(ssp, SSDR); + navpoint->data[navpoint->index + 0] = (data >> 8); + navpoint->data[navpoint->index + 1] = data; + navpoint->index += 2; + if (HEADER_LENGTH(navpoint->data[0]) < navpoint->index) { + navpoint_packet(navpoint); + navpoint->index = 0; + } + status = pxa_ssp_read_reg(ssp, SSSR); + ret = IRQ_HANDLED; + } + + return ret; +} + +static void navpoint_up(struct navpoint *navpoint) +{ + struct ssp_device *ssp = navpoint->ssp; + int timeout; + + clk_prepare_enable(ssp->clk); + + pxa_ssp_write_reg(ssp, SSCR1, sscr1); + pxa_ssp_write_reg(ssp, SSSR, sssr); + pxa_ssp_write_reg(ssp, SSTO, 0); + pxa_ssp_write_reg(ssp, SSCR0, sscr0); /* SSCR0_SSE written last */ + + /* Wait until SSP port is ready for slave clock operations */ + for (timeout = 100; timeout != 0; --timeout) { + if (!(pxa_ssp_read_reg(ssp, SSSR) & SSSR_CSS)) + break; + msleep(1); + } + + if (timeout == 0) + dev_err(navpoint->dev, + "timeout waiting for SSSR[CSS] to clear\n"); + + if (gpio_is_valid(navpoint->gpio)) + gpio_set_value(navpoint->gpio, 1); +} + +static void navpoint_down(struct navpoint *navpoint) +{ + struct ssp_device *ssp = navpoint->ssp; + + if (gpio_is_valid(navpoint->gpio)) + gpio_set_value(navpoint->gpio, 0); + + pxa_ssp_write_reg(ssp, SSCR0, 0); + + clk_disable_unprepare(ssp->clk); +} + +static int navpoint_open(struct input_dev *input) +{ + struct navpoint *navpoint = input_get_drvdata(input); + + navpoint_up(navpoint); + + return 0; +} + +static void navpoint_close(struct input_dev *input) +{ + struct navpoint *navpoint = input_get_drvdata(input); + + navpoint_down(navpoint); +} + +static int __devinit navpoint_probe(struct platform_device *pdev) +{ + const struct navpoint_platform_data *pdata = + dev_get_platdata(&pdev->dev); + struct ssp_device *ssp; + struct input_dev *input; + struct navpoint *navpoint; + int error; + + if (!pdata) { + dev_err(&pdev->dev, "no platform data\n"); + return -EINVAL; + } + + if (gpio_is_valid(pdata->gpio)) { + error = gpio_request_one(pdata->gpio, GPIOF_OUT_INIT_LOW, + "SYNAPTICS_ON"); + if (error) + return error; + } + + ssp = pxa_ssp_request(pdata->port, pdev->name); + if (!ssp) { + error = -ENODEV; + goto err_free_gpio; + } + + /* HaRET does not disable devices before jumping into Linux */ + if (pxa_ssp_read_reg(ssp, SSCR0) & SSCR0_SSE) { + pxa_ssp_write_reg(ssp, SSCR0, 0); + dev_warn(&pdev->dev, "ssp%d already enabled\n", pdata->port); + } + + navpoint = kzalloc(sizeof(*navpoint), GFP_KERNEL); + input = input_allocate_device(); + if (!navpoint || !input) { + error = -ENOMEM; + goto err_free_mem; + } + + navpoint->ssp = ssp; + navpoint->input = input; + navpoint->dev = &pdev->dev; + navpoint->gpio = pdata->gpio; + + input->name = pdev->name; + input->dev.parent = &pdev->dev; + + __set_bit(EV_KEY, input->evbit); + __set_bit(EV_ABS, input->evbit); + __set_bit(BTN_LEFT, input->keybit); + __set_bit(BTN_TOUCH, input->keybit); + __set_bit(BTN_TOOL_FINGER, input->keybit); + + input_set_abs_params(input, ABS_X, + NAVPOINT_X_MIN, NAVPOINT_X_MAX, 0, 0); + input_set_abs_params(input, ABS_Y, + NAVPOINT_Y_MIN, NAVPOINT_Y_MAX, 0, 0); + input_set_abs_params(input, ABS_PRESSURE, + NAVPOINT_PRESSURE_MIN, NAVPOINT_PRESSURE_MAX, + 0, 0); + + input->open = navpoint_open; + input->close = navpoint_close; + + input_set_drvdata(input, navpoint); + + error = request_irq(ssp->irq, navpoint_irq, 0, pdev->name, navpoint); + if (error) + goto err_free_mem; + + error = input_register_device(input); + if (error) + goto err_free_irq; + + platform_set_drvdata(pdev, navpoint); + dev_dbg(&pdev->dev, "ssp%d, irq %d\n", pdata->port, ssp->irq); + + return 0; + +err_free_irq: + free_irq(ssp->irq, &pdev->dev); +err_free_mem: + input_free_device(input); + kfree(navpoint); + pxa_ssp_free(ssp); +err_free_gpio: + if (gpio_is_valid(pdata->gpio)) + gpio_free(pdata->gpio); + + return error; +} + +static int __devexit navpoint_remove(struct platform_device *pdev) +{ + const struct navpoint_platform_data *pdata = + dev_get_platdata(&pdev->dev); + struct navpoint *navpoint = platform_get_drvdata(pdev); + struct ssp_device *ssp = navpoint->ssp; + + free_irq(ssp->irq, navpoint); + + input_unregister_device(navpoint->input); + kfree(navpoint); + + pxa_ssp_free(ssp); + + if (gpio_is_valid(pdata->gpio)) + gpio_free(pdata->gpio); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int navpoint_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct navpoint *navpoint = platform_get_drvdata(pdev); + struct input_dev *input = navpoint->input; + + mutex_lock(&input->mutex); + if (input->users) + navpoint_down(navpoint); + mutex_unlock(&input->mutex); + + return 0; +} + +static int navpoint_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct navpoint *navpoint = platform_get_drvdata(pdev); + struct input_dev *input = navpoint->input; + + mutex_lock(&input->mutex); + if (input->users) + navpoint_up(navpoint); + mutex_unlock(&input->mutex); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(navpoint_pm_ops, navpoint_suspend, navpoint_resume); + +static struct platform_driver navpoint_driver = { + .probe = navpoint_probe, + .remove = __devexit_p(navpoint_remove), + .driver = { + .name = "navpoint", + .owner = THIS_MODULE, + .pm = &navpoint_pm_ops, + }, +}; + +module_platform_driver(navpoint_driver); + +MODULE_AUTHOR("Paul Parsons <lost.distance@yahoo.com>"); +MODULE_DESCRIPTION("Synaptics NavPoint (PXA27x SSP/SPI) driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:navpoint"); diff --git a/drivers/input/mouse/sentelic.c b/drivers/input/mouse/sentelic.c index 661a0ca3b3d6..3f5649f19082 100644 --- a/drivers/input/mouse/sentelic.c +++ b/drivers/input/mouse/sentelic.c @@ -41,7 +41,7 @@ #define GET_ABS_Y(packet) ((packet[2] << 2) | (packet[3] & 0x03)) /** Driver version. */ -static const char fsp_drv_ver[] = "1.0.0-K"; +static const char fsp_drv_ver[] = "1.1.0-K"; /* * Make sure that the value being sent to FSP will not conflict with @@ -303,6 +303,27 @@ static int fsp_get_revision(struct psmouse *psmouse, int *rev) return 0; } +static int fsp_get_sn(struct psmouse *psmouse, int *sn) +{ + int v0, v1, v2; + int rc = -EIO; + + /* production number since Cx is available at: 0x0b40 ~ 0x0b42 */ + if (fsp_page_reg_write(psmouse, FSP_PAGE_0B)) + goto out; + if (fsp_reg_read(psmouse, FSP_REG_SN0, &v0)) + goto out; + if (fsp_reg_read(psmouse, FSP_REG_SN1, &v1)) + goto out; + if (fsp_reg_read(psmouse, FSP_REG_SN2, &v2)) + goto out; + *sn = (v0 << 16) | (v1 << 8) | v2; + rc = 0; +out: + fsp_page_reg_write(psmouse, FSP_PAGE_DEFAULT); + return rc; +} + static int fsp_get_buttons(struct psmouse *psmouse, int *btn) { static const int buttons[] = { @@ -1000,16 +1021,21 @@ static int fsp_reconnect(struct psmouse *psmouse) int fsp_init(struct psmouse *psmouse) { struct fsp_data *priv; - int ver, rev; + int ver, rev, sn = 0; int error; if (fsp_get_version(psmouse, &ver) || fsp_get_revision(psmouse, &rev)) { return -ENODEV; } + if (ver >= FSP_VER_STL3888_C0) { + /* firmware information is only available since C0 */ + fsp_get_sn(psmouse, &sn); + } - psmouse_info(psmouse, "Finger Sensing Pad, hw: %d.%d.%d, sw: %s\n", - ver >> 4, ver & 0x0F, rev, fsp_drv_ver); + psmouse_info(psmouse, + "Finger Sensing Pad, hw: %d.%d.%d, sn: %x, sw: %s\n", + ver >> 4, ver & 0x0F, rev, sn, fsp_drv_ver); psmouse->private = priv = kzalloc(sizeof(struct fsp_data), GFP_KERNEL); if (!priv) diff --git a/drivers/input/mouse/sentelic.h b/drivers/input/mouse/sentelic.h index 334de19e5ddb..aa697ece405b 100644 --- a/drivers/input/mouse/sentelic.h +++ b/drivers/input/mouse/sentelic.h @@ -65,6 +65,14 @@ #define FSP_BIT_SWC1_GST_GRP1 BIT(6) #define FSP_BIT_SWC1_BX_COMPAT BIT(7) +#define FSP_PAGE_0B (0x0b) +#define FSP_PAGE_82 (0x82) +#define FSP_PAGE_DEFAULT FSP_PAGE_82 + +#define FSP_REG_SN0 (0x40) +#define FSP_REG_SN1 (0x41) +#define FSP_REG_SN2 (0x42) + /* Finger-sensing Pad packet formating related definitions */ /* absolute packet type */ diff --git a/drivers/input/mouse/sermouse.c b/drivers/input/mouse/sermouse.c index 17ff137b9bd5..d5928fd0c914 100644 --- a/drivers/input/mouse/sermouse.c +++ b/drivers/input/mouse/sermouse.c @@ -355,15 +355,4 @@ static struct serio_driver sermouse_drv = { .disconnect = sermouse_disconnect, }; -static int __init sermouse_init(void) -{ - return serio_register_driver(&sermouse_drv); -} - -static void __exit sermouse_exit(void) -{ - serio_unregister_driver(&sermouse_drv); -} - -module_init(sermouse_init); -module_exit(sermouse_exit); +module_serio_driver(sermouse_drv); diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index a4b14a41cbf4..c703d53be3a0 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -45,16 +45,6 @@ #define YMIN_NOMINAL 1408 #define YMAX_NOMINAL 4448 -/* - * Synaptics touchpads report the y coordinate from bottom to top, which is - * opposite from what userspace expects. - * This function is used to invert y before reporting. - */ -static int synaptics_invert_y(int y) -{ - return YMAX_NOMINAL + YMIN_NOMINAL - y; -} - /***************************************************************************** * Stuff we need even when we do not want native Synaptics support @@ -112,6 +102,16 @@ void synaptics_reset(struct psmouse *psmouse) ****************************************************************************/ /* + * Synaptics touchpads report the y coordinate from bottom to top, which is + * opposite from what userspace expects. + * This function is used to invert y before reporting. + */ +static int synaptics_invert_y(int y) +{ + return YMAX_NOMINAL + YMIN_NOMINAL - y; +} + +/* * Send a command to the synpatics touchpad by special commands */ static int synaptics_send_cmd(struct psmouse *psmouse, unsigned char c, unsigned char *param) diff --git a/drivers/input/mouse/vsxxxaa.c b/drivers/input/mouse/vsxxxaa.c index eb9a3cfbeefa..e900d465aaf6 100644 --- a/drivers/input/mouse/vsxxxaa.c +++ b/drivers/input/mouse/vsxxxaa.c @@ -548,16 +548,4 @@ static struct serio_driver vsxxxaa_drv = { .disconnect = vsxxxaa_disconnect, }; -static int __init vsxxxaa_init(void) -{ - return serio_register_driver(&vsxxxaa_drv); -} - -static void __exit vsxxxaa_exit(void) -{ - serio_unregister_driver(&vsxxxaa_drv); -} - -module_init(vsxxxaa_init); -module_exit(vsxxxaa_exit); - +module_serio_driver(vsxxxaa_drv); |