diff options
Diffstat (limited to 'drivers/media/dvb/pluto2/pluto2.c')
| -rw-r--r-- | drivers/media/dvb/pluto2/pluto2.c | 815 |
1 files changed, 0 insertions, 815 deletions
diff --git a/drivers/media/dvb/pluto2/pluto2.c b/drivers/media/dvb/pluto2/pluto2.c deleted file mode 100644 index f148b19a206a..000000000000 --- a/drivers/media/dvb/pluto2/pluto2.c +++ /dev/null @@ -1,815 +0,0 @@ -/* - * pluto2.c - Satelco Easywatch Mobile Terrestrial Receiver [DVB-T] - * - * Copyright (C) 2005 Andreas Oberritter <obi@linuxtv.org> - * - * based on pluto2.c 1.10 - http://instinct-wp8.no-ip.org/pluto/ - * by Dany Salman <salmandany@yahoo.fr> - * Copyright (c) 2004 TDF - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ - -#include <linux/i2c.h> -#include <linux/i2c-algo-bit.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/pci.h> -#include <linux/dma-mapping.h> -#include <linux/slab.h> - -#include "demux.h" -#include "dmxdev.h" -#include "dvb_demux.h" -#include "dvb_frontend.h" -#include "dvb_net.h" -#include "dvbdev.h" -#include "tda1004x.h" - -DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); - -#define DRIVER_NAME "pluto2" - -#define REG_PIDn(n) ((n) << 2) /* PID n pattern registers */ -#define REG_PCAR 0x0020 /* PC address register */ -#define REG_TSCR 0x0024 /* TS ctrl & status */ -#define REG_MISC 0x0028 /* miscellaneous */ -#define REG_MMAC 0x002c /* MSB MAC address */ -#define REG_IMAC 0x0030 /* ISB MAC address */ -#define REG_LMAC 0x0034 /* LSB MAC address */ -#define REG_SPID 0x0038 /* SPI data */ -#define REG_SLCS 0x003c /* serial links ctrl/status */ - -#define PID0_NOFIL (0x0001 << 16) -#define PIDn_ENP (0x0001 << 15) -#define PID0_END (0x0001 << 14) -#define PID0_AFIL (0x0001 << 13) -#define PIDn_PID (0x1fff << 0) - -#define TSCR_NBPACKETS (0x00ff << 24) -#define TSCR_DEM (0x0001 << 17) -#define TSCR_DE (0x0001 << 16) -#define TSCR_RSTN (0x0001 << 15) -#define TSCR_MSKO (0x0001 << 14) -#define TSCR_MSKA (0x0001 << 13) -#define TSCR_MSKL (0x0001 << 12) -#define TSCR_OVR (0x0001 << 11) -#define TSCR_AFUL (0x0001 << 10) -#define TSCR_LOCK (0x0001 << 9) -#define TSCR_IACK (0x0001 << 8) -#define TSCR_ADEF (0x007f << 0) - -#define MISC_DVR (0x0fff << 4) -#define MISC_ALED (0x0001 << 3) -#define MISC_FRST (0x0001 << 2) -#define MISC_LED1 (0x0001 << 1) -#define MISC_LED0 (0x0001 << 0) - -#define SPID_SPIDR (0x00ff << 0) - -#define SLCS_SCL (0x0001 << 7) -#define SLCS_SDA (0x0001 << 6) -#define SLCS_CSN (0x0001 << 2) -#define SLCS_OVR (0x0001 << 1) -#define SLCS_SWC (0x0001 << 0) - -#define TS_DMA_PACKETS (8) -#define TS_DMA_BYTES (188 * TS_DMA_PACKETS) - -#define I2C_ADDR_TDA10046 0x10 -#define I2C_ADDR_TUA6034 0xc2 -#define NHWFILTERS 8 - -struct pluto { - /* pci */ - struct pci_dev *pdev; - u8 __iomem *io_mem; - - /* dvb */ - struct dmx_frontend hw_frontend; - struct dmx_frontend mem_frontend; - struct dmxdev dmxdev; - struct dvb_adapter dvb_adapter; - struct dvb_demux demux; - struct dvb_frontend *fe; - struct dvb_net dvbnet; - unsigned int full_ts_users; - unsigned int users; - - /* i2c */ - struct i2c_algo_bit_data i2c_bit; - struct i2c_adapter i2c_adap; - unsigned int i2cbug; - - /* irq */ - unsigned int overflow; - unsigned int dead; - - /* dma */ - dma_addr_t dma_addr; - u8 dma_buf[TS_DMA_BYTES]; - u8 dummy[4096]; -}; - -static inline struct pluto *feed_to_pluto(struct dvb_demux_feed *feed) -{ - return container_of(feed->demux, struct pluto, demux); -} - -static inline struct pluto *frontend_to_pluto(struct dvb_frontend *fe) -{ - return container_of(fe->dvb, struct pluto, dvb_adapter); -} - -static inline u32 pluto_readreg(struct pluto *pluto, u32 reg) -{ - return readl(&pluto->io_mem[reg]); -} - -static inline void pluto_writereg(struct pluto *pluto, u32 reg, u32 val) -{ - writel(val, &pluto->io_mem[reg]); -} - -static inline void pluto_rw(struct pluto *pluto, u32 reg, u32 mask, u32 bits) -{ - u32 val = readl(&pluto->io_mem[reg]); - val &= ~mask; - val |= bits; - writel(val, &pluto->io_mem[reg]); -} - -static void pluto_write_tscr(struct pluto *pluto, u32 val) -{ - /* set the number of packets */ - val &= ~TSCR_ADEF; - val |= TS_DMA_PACKETS / 2; - - pluto_writereg(pluto, REG_TSCR, val); -} - -static void pluto_setsda(void *data, int state) -{ - struct pluto *pluto = data; - - if (state) - pluto_rw(pluto, REG_SLCS, SLCS_SDA, SLCS_SDA); - else - pluto_rw(pluto, REG_SLCS, SLCS_SDA, 0); -} - -static void pluto_setscl(void *data, int state) -{ - struct pluto *pluto = data; - - if (state) - pluto_rw(pluto, REG_SLCS, SLCS_SCL, SLCS_SCL); - else - pluto_rw(pluto, REG_SLCS, SLCS_SCL, 0); - - /* try to detect i2c_inb() to workaround hardware bug: - * reset SDA to high after SCL has been set to low */ - if ((state) && (pluto->i2cbug == 0)) { - pluto->i2cbug = 1; - } else { - if ((!state) && (pluto->i2cbug == 1)) - pluto_setsda(pluto, 1); - pluto->i2cbug = 0; - } -} - -static int pluto_getsda(void *data) -{ - struct pluto *pluto = data; - - return pluto_readreg(pluto, REG_SLCS) & SLCS_SDA; -} - -static int pluto_getscl(void *data) -{ - struct pluto *pluto = data; - - return pluto_readreg(pluto, REG_SLCS) & SLCS_SCL; -} - -static void pluto_reset_frontend(struct pluto *pluto, int reenable) -{ - u32 val = pluto_readreg(pluto, REG_MISC); - - if (val & MISC_FRST) { - val &= ~MISC_FRST; - pluto_writereg(pluto, REG_MISC, val); - } - if (reenable) { - val |= MISC_FRST; - pluto_writereg(pluto, REG_MISC, val); - } -} - -static void pluto_reset_ts(struct pluto *pluto, int reenable) -{ - u32 val = pluto_readreg(pluto, REG_TSCR); - - if (val & TSCR_RSTN) { - val &= ~TSCR_RSTN; - pluto_write_tscr(pluto, val); - } - if (reenable) { - val |= TSCR_RSTN; - pluto_write_tscr(pluto, val); - } -} - -static void pluto_set_dma_addr(struct pluto *pluto) -{ - pluto_writereg(pluto, REG_PCAR, pluto->dma_addr); -} - -static int __devinit pluto_dma_map(struct pluto *pluto) -{ - pluto->dma_addr = pci_map_single(pluto->pdev, pluto->dma_buf, - TS_DMA_BYTES, PCI_DMA_FROMDEVICE); - - return pci_dma_mapping_error(pluto->pdev, pluto->dma_addr); -} - -static void pluto_dma_unmap(struct pluto *pluto) -{ - pci_unmap_single(pluto->pdev, pluto->dma_addr, - TS_DMA_BYTES, PCI_DMA_FROMDEVICE); -} - -static int pluto_start_feed(struct dvb_demux_feed *f) -{ - struct pluto *pluto = feed_to_pluto(f); - - /* enable PID filtering */ - if (pluto->users++ == 0) - pluto_rw(pluto, REG_PIDn(0), PID0_AFIL | PID0_NOFIL, 0); - - if ((f->pid < 0x2000) && (f->index < NHWFILTERS)) - pluto_rw(pluto, REG_PIDn(f->index), PIDn_ENP | PIDn_PID, PIDn_ENP | f->pid); - else if (pluto->full_ts_users++ == 0) - pluto_rw(pluto, REG_PIDn(0), PID0_NOFIL, PID0_NOFIL); - - return 0; -} - -static int pluto_stop_feed(struct dvb_demux_feed *f) -{ - struct pluto *pluto = feed_to_pluto(f); - - /* disable PID filtering */ - if (--pluto->users == 0) - pluto_rw(pluto, REG_PIDn(0), PID0_AFIL, PID0_AFIL); - - if ((f->pid < 0x2000) && (f->index < NHWFILTERS)) - pluto_rw(pluto, REG_PIDn(f->index), PIDn_ENP | PIDn_PID, 0x1fff); - else if (--pluto->full_ts_users == 0) - pluto_rw(pluto, REG_PIDn(0), PID0_NOFIL, 0); - - return 0; -} - -static void pluto_dma_end(struct pluto *pluto, unsigned int nbpackets) -{ - /* synchronize the DMA transfer with the CPU - * first so that we see updated contents. */ - pci_dma_sync_single_for_cpu(pluto->pdev, pluto->dma_addr, - TS_DMA_BYTES, PCI_DMA_FROMDEVICE); - - /* Workaround for broken hardware: - * [1] On startup NBPACKETS seems to contain an uninitialized value, - * but no packets have been transferred. - * [2] Sometimes (actually very often) NBPACKETS stays at zero - * although one packet has been transferred. - * [3] Sometimes (actually rarely), the card gets into an erroneous - * mode where it continuously generates interrupts, claiming it - * has received nbpackets>TS_DMA_PACKETS packets, but no packet - * has been transferred. Only a reset seems to solve this - */ - if ((nbpackets == 0) || (nbpackets > TS_DMA_PACKETS)) { - unsigned int i = 0; - while (pluto->dma_buf[i] == 0x47) - i += 188; - nbpackets = i / 188; - if (i == 0) { - pluto_reset_ts(pluto, 1); - dev_printk(KERN_DEBUG, &pluto->pdev->dev, "resetting TS because of invalid packet counter\n"); - } - } - - dvb_dmx_swfilter_packets(&pluto->demux, pluto->dma_buf, nbpackets); - - /* clear the dma buffer. this is needed to be able to identify - * new valid ts packets above */ - memset(pluto->dma_buf, 0, nbpackets * 188); - - /* reset the dma address */ - pluto_set_dma_addr(pluto); - - /* sync the buffer and give it back to the card */ - pci_dma_sync_single_for_device(pluto->pdev, pluto->dma_addr, - TS_DMA_BYTES, PCI_DMA_FROMDEVICE); -} - -static irqreturn_t pluto_irq(int irq, void *dev_id) -{ - struct pluto *pluto = dev_id; - u32 tscr; - - /* check whether an interrupt occurred on this device */ - tscr = pluto_readreg(pluto, REG_TSCR); - if (!(tscr & (TSCR_DE | TSCR_OVR))) - return IRQ_NONE; - - if (tscr == 0xffffffff) { - if (pluto->dead == 0) - dev_err(&pluto->pdev->dev, "card has hung or been ejected.\n"); - /* It's dead Jim */ - pluto->dead = 1; - return IRQ_HANDLED; - } - - /* dma end interrupt */ - if (tscr & TSCR_DE) { - pluto_dma_end(pluto, (tscr & TSCR_NBPACKETS) >> 24); - /* overflow interrupt */ - if (tscr & TSCR_OVR) - pluto->overflow++; - if (pluto->overflow) { - dev_err(&pluto->pdev->dev, "overflow irq (%d)\n", - pluto->overflow); - pluto_reset_ts(pluto, 1); - pluto->overflow = 0; - } - } else if (tscr & TSCR_OVR) { - pluto->overflow++; - } - - /* ACK the interrupt */ - pluto_write_tscr(pluto, tscr | TSCR_IACK); - - return IRQ_HANDLED; -} - -static void __devinit pluto_enable_irqs(struct pluto *pluto) -{ - u32 val = pluto_readreg(pluto, REG_TSCR); - - /* disable AFUL and LOCK interrupts */ - val |= (TSCR_MSKA | TSCR_MSKL); - /* enable DMA and OVERFLOW interrupts */ - val &= ~(TSCR_DEM | TSCR_MSKO); - /* clear pending interrupts */ - val |= TSCR_IACK; - - pluto_write_tscr(pluto, val); -} - -static void pluto_disable_irqs(struct pluto *pluto) -{ - u32 val = pluto_readreg(pluto, REG_TSCR); - - /* disable all interrupts */ - val |= (TSCR_DEM | TSCR_MSKO | TSCR_MSKA | TSCR_MSKL); - /* clear pending interrupts */ - val |= TSCR_IACK; - - pluto_write_tscr(pluto, val); -} - -static int __devinit pluto_hw_init(struct pluto *pluto) -{ - pluto_reset_frontend(pluto, 1); - - /* set automatic LED control by FPGA */ - pluto_rw(pluto, REG_MISC, MISC_ALED, MISC_ALED); - - /* set data endianess */ -#ifdef __LITTLE_ENDIAN - pluto_rw(pluto, REG_PIDn(0), PID0_END, PID0_END); -#else - pluto_rw(pluto, REG_PIDn(0), PID0_END, 0); -#endif - /* map DMA and set address */ - pluto_dma_map(pluto); - pluto_set_dma_addr(pluto); - - /* enable interrupts */ - pluto_enable_irqs(pluto); - - /* reset TS logic */ - pluto_reset_ts(pluto, 1); - - return 0; -} - -static void pluto_hw_exit(struct pluto *pluto) -{ - /* disable interrupts */ - pluto_disable_irqs(pluto); - - pluto_reset_ts(pluto, 0); - - /* LED: disable automatic control, enable yellow, disable green */ - pluto_rw(pluto, REG_MISC, MISC_ALED | MISC_LED1 | MISC_LED0, MISC_LED1); - - /* unmap DMA */ - pluto_dma_unmap(pluto); - - pluto_reset_frontend(pluto, 0); -} - -static inline u32 divide(u32 numerator, u32 denominator) -{ - if (denominator == 0) - return ~0; - - return DIV_ROUND_CLOSEST(numerator, denominator); -} - -/* LG Innotek TDTE-E001P (Infineon TUA6034) */ -static int lg_tdtpe001p_tuner_set_params(struct dvb_frontend *fe) -{ - struct dtv_frontend_properties *p = &fe->dtv_property_cache; - struct pluto *pluto = frontend_to_pluto(fe); - struct i2c_msg msg; - int ret; - u8 buf[4]; - u32 div; - - // Fref = 166.667 Hz - // Fref * 3 = 500.000 Hz - // IF = 36166667 - // IF / Fref = 217 - //div = divide(p->frequency + 36166667, 166667); - div = divide(p->frequency * 3, 500000) + 217; - buf[0] = (div >> 8) & 0x7f; - buf[1] = (div >> 0) & 0xff; - - if (p->frequency < 611000000) - buf[2] = 0xb4; - else if (p->frequency < 811000000) - buf[2] = 0xbc; - else - buf[2] = 0xf4; - - // VHF: 174-230 MHz - // center: 350 MHz - // UHF: 470-862 MHz - if (p->frequency < 350000000) - buf[3] = 0x02; - else - buf[3] = 0x04; - - if (p->bandwidth_hz == 8000000) - buf[3] |= 0x08; - - msg.addr = I2C_ADDR_TUA6034 >> 1; - msg.flags = 0; - msg.buf = buf; - msg.len = sizeof(buf); - - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 1); - ret = i2c_transfer(&pluto->i2c_adap, &msg, 1); - if (ret < 0) - return ret; - else if (ret == 0) - return -EREMOTEIO; - - return 0; -} - -static int pluto2_request_firmware(struct dvb_frontend *fe, - const struct firmware **fw, char *name) -{ - struct pluto *pluto = frontend_to_pluto(fe); - - return request_firmware(fw, name, &pluto->pdev->dev); -} - -static struct tda1004x_config pluto2_fe_config __devinitdata = { - .demod_address = I2C_ADDR_TDA10046 >> 1, - .invert = 1, - .invert_oclk = 0, - .xtal_freq = TDA10046_XTAL_16M, - .agc_config = TDA10046_AGC_DEFAULT, - .if_freq = TDA10046_FREQ_3617, - .request_firmware = pluto2_request_firmware, -}; - -static int __devinit frontend_init(struct pluto *pluto) -{ - int ret; - - pluto->fe = tda10046_attach(&pluto2_fe_config, &pluto->i2c_adap); - if (!pluto->fe) { - dev_err(&pluto->pdev->dev, "could not attach frontend\n"); - return -ENODEV; - } - pluto->fe->ops.tuner_ops.set_params = lg_tdtpe001p_tuner_set_params; - - ret = dvb_register_frontend(&pluto->dvb_adapter, pluto->fe); - if (ret < 0) { - if (pluto->fe->ops.release) - pluto->fe->ops.release(pluto->fe); - return ret; - } - - return 0; -} - -static void __devinit pluto_read_rev(struct pluto *pluto) -{ - u32 val = pluto_readreg(pluto, REG_MISC) & MISC_DVR; - dev_info(&pluto->pdev->dev, "board revision %d.%d\n", - (val >> 12) & 0x0f, (val >> 4) & 0xff); -} - -static void __devinit pluto_read_mac(struct pluto *pluto, u8 *mac) -{ - u32 val = pluto_readreg(pluto, REG_MMAC); - mac[0] = (val >> 8) & 0xff; - mac[1] = (val >> 0) & 0xff; - - val = pluto_readreg(pluto, REG_IMAC); - mac[2] = (val >> 8) & 0xff; - mac[3] = (val >> 0) & 0xff; - - val = pluto_readreg(pluto, REG_LMAC); - mac[4] = (val >> 8) & 0xff; - mac[5] = (val >> 0) & 0xff; - - dev_info(&pluto->pdev->dev, "MAC %pM\n", mac); -} - -static int __devinit pluto_read_serial(struct pluto *pluto) -{ - struct pci_dev *pdev = pluto->pdev; - unsigned int i, j; - u8 __iomem *cis; - - cis = pci_iomap(pdev, 1, 0); - if (!cis) - return -EIO; - - dev_info(&pdev->dev, "S/N "); - - for (i = 0xe0; i < 0x100; i += 4) { - u32 val = readl(&cis[i]); - for (j = 0; j < 32; j += 8) { - if ((val & 0xff) == 0xff) - goto out; - printk("%c", val & 0xff); - val >>= 8; - } - } -out: - printk("\n"); - pci_iounmap(pdev, cis); - - return 0; -} - -static int __devinit pluto2_probe(struct pci_dev *pdev, - const struct pci_device_id *ent) -{ - struct pluto *pluto; - struct dvb_adapter *dvb_adapter; - struct dvb_demux *dvbdemux; - struct dmx_demux *dmx; - int ret = -ENOMEM; - - pluto = kzalloc(sizeof(struct pluto), GFP_KERNEL); - if (!pluto) - goto out; - - pluto->pdev = pdev; - - ret = pci_enable_device(pdev); - if (ret < 0) - goto err_kfree; - - /* enable interrupts */ - pci_write_config_dword(pdev, 0x6c, 0x8000); - - ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); - if (ret < 0) - goto err_pci_disable_device; - - pci_set_master(pdev); - - ret = pci_request_regions(pdev, DRIVER_NAME); - if (ret < 0) - goto err_pci_disable_device; - - pluto->io_mem = pci_iomap(pdev, 0, 0x40); - if (!pluto->io_mem) { - ret = -EIO; - goto err_pci_release_regions; - } - - pci_set_drvdata(pdev, pluto); - - ret = request_irq(pdev->irq, pluto_irq, IRQF_SHARED, DRIVER_NAME, pluto); - if (ret < 0) - goto err_pci_iounmap; - - ret = pluto_hw_init(pluto); - if (ret < 0) - goto err_free_irq; - - /* i2c */ - i2c_set_adapdata(&pluto->i2c_adap, pluto); - strcpy(pluto->i2c_adap.name, DRIVER_NAME); - pluto->i2c_adap.owner = THIS_MODULE; - pluto->i2c_adap.dev.parent = &pdev->dev; - pluto->i2c_adap.algo_data = &pluto->i2c_bit; - pluto->i2c_bit.data = pluto; - pluto->i2c_bit.setsda = pluto_setsda; - pluto->i2c_bit.setscl = pluto_setscl; - pluto->i2c_bit.getsda = pluto_getsda; - pluto->i2c_bit.getscl = pluto_getscl; - pluto->i2c_bit.udelay = 10; - pluto->i2c_bit.timeout = 10; - - /* Raise SCL and SDA */ - pluto_setsda(pluto, 1); - pluto_setscl(pluto, 1); - - ret = i2c_bit_add_bus(&pluto->i2c_adap); - if (ret < 0) - goto err_pluto_hw_exit; - - /* dvb */ - ret = dvb_register_adapter(&pluto->dvb_adapter, DRIVER_NAME, - THIS_MODULE, &pdev->dev, adapter_nr); - if (ret < 0) - goto err_i2c_del_adapter; - - dvb_adapter = &pluto->dvb_adapter; - - pluto_read_rev(pluto); - pluto_read_serial(pluto); - pluto_read_mac(pluto, dvb_adapter->proposed_mac); - - dvbdemux = &pluto->demux; - dvbdemux->filternum = 256; - dvbdemux->feednum = 256; - dvbdemux->start_feed = pluto_start_feed; - dvbdemux->stop_feed = pluto_stop_feed; - dvbdemux->dmx.capabilities = (DMX_TS_FILTERING | - DMX_SECTION_FILTERING | DMX_MEMORY_BASED_FILTERING); - ret = dvb_dmx_init(dvbdemux); - if (ret < 0) - goto err_dvb_unregister_adapter; - - dmx = &dvbdemux->dmx; - - pluto->hw_frontend.source = DMX_FRONTEND_0; - pluto->mem_frontend.source = DMX_MEMORY_FE; - pluto->dmxdev.filternum = NHWFILTERS; - pluto->dmxdev.demux = dmx; - - ret = dvb_dmxdev_init(&pluto->dmxdev, dvb_adapter); - if (ret < 0) - goto err_dvb_dmx_release; - - ret = dmx->add_frontend(dmx, &pluto->hw_frontend); - if (ret < 0) - goto err_dvb_dmxdev_release; - - ret = dmx->add_frontend(dmx, &pluto->mem_frontend); - if (ret < 0) - goto err_remove_hw_frontend; - - ret = dmx->connect_frontend(dmx, &pluto->hw_frontend); - if (ret < 0) - goto err_remove_mem_frontend; - - ret = frontend_init(pluto); - if (ret < 0) - goto err_disconnect_frontend; - - dvb_net_init(dvb_adapter, &pluto->dvbnet, dmx); -out: - return ret; - -err_disconnect_frontend: - dmx->disconnect_frontend(dmx); -err_remove_mem_frontend: - dmx->remove_frontend(dmx, &pluto->mem_frontend); -err_remove_hw_frontend: - dmx->remove_frontend(dmx, &pluto->hw_frontend); -err_dvb_dmxdev_release: - dvb_dmxdev_release(&pluto->dmxdev); -err_dvb_dmx_release: - dvb_dmx_release(dvbdemux); -err_dvb_unregister_adapter: - dvb_unregister_adapter(dvb_adapter); -err_i2c_del_adapter: - i2c_del_adapter(&pluto->i2c_adap); -err_pluto_hw_exit: - pluto_hw_exit(pluto); -err_free_irq: - free_irq(pdev->irq, pluto); -err_pci_iounmap: - pci_iounmap(pdev, pluto->io_mem); -err_pci_release_regions: - pci_release_regions(pdev); -err_pci_disable_device: - pci_disable_device(pdev); -err_kfree: - pci_set_drvdata(pdev, NULL); - kfree(pluto); - goto out; -} - -static void __devexit pluto2_remove(struct pci_dev *pdev) -{ - struct pluto *pluto = pci_get_drvdata(pdev); - struct dvb_adapter *dvb_adapter = &pluto->dvb_adapter; - struct dvb_demux *dvbdemux = &pluto->demux; - struct dmx_demux *dmx = &dvbdemux->dmx; - - dmx->close(dmx); - dvb_net_release(&pluto->dvbnet); - if (pluto->fe) - dvb_unregister_frontend(pluto->fe); - - dmx->disconnect_frontend(dmx); - dmx->remove_frontend(dmx, &pluto->mem_frontend); - dmx->remove_frontend(dmx, &pluto->hw_frontend); - dvb_dmxdev_release(&pluto->dmxdev); - dvb_dmx_release(dvbdemux); - dvb_unregister_adapter(dvb_adapter); - i2c_del_adapter(&pluto->i2c_adap); - pluto_hw_exit(pluto); - free_irq(pdev->irq, pluto); - pci_iounmap(pdev, pluto->io_mem); - pci_release_regions(pdev); - pci_disable_device(pdev); - pci_set_drvdata(pdev, NULL); - kfree(pluto); -} - -#ifndef PCI_VENDOR_ID_SCM -#define PCI_VENDOR_ID_SCM 0x0432 -#endif -#ifndef PCI_DEVICE_ID_PLUTO2 -#define PCI_DEVICE_ID_PLUTO2 0x0001 -#endif - -static struct pci_device_id pluto2_id_table[] __devinitdata = { - { - .vendor = PCI_VENDOR_ID_SCM, - .device = PCI_DEVICE_ID_PLUTO2, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - }, { - /* empty */ - }, -}; - -MODULE_DEVICE_TABLE(pci, pluto2_id_table); - -static struct pci_driver pluto2_driver = { - .name = DRIVER_NAME, - .id_table = pluto2_id_table, - .probe = pluto2_probe, - .remove = __devexit_p(pluto2_remove), -}; - -static int __init pluto2_init(void) -{ - return pci_register_driver(&pluto2_driver); -} - -static void __exit pluto2_exit(void) -{ - pci_unregister_driver(&pluto2_driver); -} - -module_init(pluto2_init); -module_exit(pluto2_exit); - -MODULE_AUTHOR("Andreas Oberritter <obi@linuxtv.org>"); -MODULE_DESCRIPTION("Pluto2 driver"); -MODULE_LICENSE("GPL"); |