diff options
Diffstat (limited to 'drivers/media/platform/omap24xxcam-dma.c')
| -rw-r--r-- | drivers/media/platform/omap24xxcam-dma.c | 601 |
1 files changed, 0 insertions, 601 deletions
diff --git a/drivers/media/platform/omap24xxcam-dma.c b/drivers/media/platform/omap24xxcam-dma.c deleted file mode 100644 index 9c00776d6583..000000000000 --- a/drivers/media/platform/omap24xxcam-dma.c +++ /dev/null @@ -1,601 +0,0 @@ -/* - * drivers/media/platform/omap24xxcam-dma.c - * - * Copyright (C) 2004 MontaVista Software, Inc. - * Copyright (C) 2004 Texas Instruments. - * Copyright (C) 2007 Nokia Corporation. - * - * Contact: Sakari Ailus <sakari.ailus@nokia.com> - * - * Based on code from Andy Lowe <source@mvista.com> and - * David Cohen <david.cohen@indt.org.br>. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - */ - -#include <linux/kernel.h> -#include <linux/io.h> -#include <linux/scatterlist.h> - -#include "omap24xxcam.h" - -/* - * - * DMA hardware. - * - */ - -/* Ack all interrupt on CSR and IRQSTATUS_L0 */ -static void omap24xxcam_dmahw_ack_all(void __iomem *base) -{ - u32 csr; - int i; - - for (i = 0; i < NUM_CAMDMA_CHANNELS; ++i) { - csr = omap24xxcam_reg_in(base, CAMDMA_CSR(i)); - /* ack interrupt in CSR */ - omap24xxcam_reg_out(base, CAMDMA_CSR(i), csr); - } - omap24xxcam_reg_out(base, CAMDMA_IRQSTATUS_L0, 0xf); -} - -/* Ack dmach on CSR and IRQSTATUS_L0 */ -static u32 omap24xxcam_dmahw_ack_ch(void __iomem *base, int dmach) -{ - u32 csr; - - csr = omap24xxcam_reg_in(base, CAMDMA_CSR(dmach)); - /* ack interrupt in CSR */ - omap24xxcam_reg_out(base, CAMDMA_CSR(dmach), csr); - /* ack interrupt in IRQSTATUS */ - omap24xxcam_reg_out(base, CAMDMA_IRQSTATUS_L0, (1 << dmach)); - - return csr; -} - -static int omap24xxcam_dmahw_running(void __iomem *base, int dmach) -{ - return omap24xxcam_reg_in(base, CAMDMA_CCR(dmach)) & CAMDMA_CCR_ENABLE; -} - -static void omap24xxcam_dmahw_transfer_setup(void __iomem *base, int dmach, - dma_addr_t start, u32 len) -{ - omap24xxcam_reg_out(base, CAMDMA_CCR(dmach), - CAMDMA_CCR_SEL_SRC_DST_SYNC - | CAMDMA_CCR_BS - | CAMDMA_CCR_DST_AMODE_POST_INC - | CAMDMA_CCR_SRC_AMODE_POST_INC - | CAMDMA_CCR_FS - | CAMDMA_CCR_WR_ACTIVE - | CAMDMA_CCR_RD_ACTIVE - | CAMDMA_CCR_SYNCHRO_CAMERA); - omap24xxcam_reg_out(base, CAMDMA_CLNK_CTRL(dmach), 0); - omap24xxcam_reg_out(base, CAMDMA_CEN(dmach), len); - omap24xxcam_reg_out(base, CAMDMA_CFN(dmach), 1); - omap24xxcam_reg_out(base, CAMDMA_CSDP(dmach), - CAMDMA_CSDP_WRITE_MODE_POSTED - | CAMDMA_CSDP_DST_BURST_EN_32 - | CAMDMA_CSDP_DST_PACKED - | CAMDMA_CSDP_SRC_BURST_EN_32 - | CAMDMA_CSDP_SRC_PACKED - | CAMDMA_CSDP_DATA_TYPE_8BITS); - omap24xxcam_reg_out(base, CAMDMA_CSSA(dmach), 0); - omap24xxcam_reg_out(base, CAMDMA_CDSA(dmach), start); - omap24xxcam_reg_out(base, CAMDMA_CSEI(dmach), 0); - omap24xxcam_reg_out(base, CAMDMA_CSFI(dmach), DMA_THRESHOLD); - omap24xxcam_reg_out(base, CAMDMA_CDEI(dmach), 0); - omap24xxcam_reg_out(base, CAMDMA_CDFI(dmach), 0); - omap24xxcam_reg_out(base, CAMDMA_CSR(dmach), - CAMDMA_CSR_MISALIGNED_ERR - | CAMDMA_CSR_SECURE_ERR - | CAMDMA_CSR_TRANS_ERR - | CAMDMA_CSR_BLOCK - | CAMDMA_CSR_DROP); - omap24xxcam_reg_out(base, CAMDMA_CICR(dmach), - CAMDMA_CICR_MISALIGNED_ERR_IE - | CAMDMA_CICR_SECURE_ERR_IE - | CAMDMA_CICR_TRANS_ERR_IE - | CAMDMA_CICR_BLOCK_IE - | CAMDMA_CICR_DROP_IE); -} - -static void omap24xxcam_dmahw_transfer_start(void __iomem *base, int dmach) -{ - omap24xxcam_reg_out(base, CAMDMA_CCR(dmach), - CAMDMA_CCR_SEL_SRC_DST_SYNC - | CAMDMA_CCR_BS - | CAMDMA_CCR_DST_AMODE_POST_INC - | CAMDMA_CCR_SRC_AMODE_POST_INC - | CAMDMA_CCR_ENABLE - | CAMDMA_CCR_FS - | CAMDMA_CCR_SYNCHRO_CAMERA); -} - -static void omap24xxcam_dmahw_transfer_chain(void __iomem *base, int dmach, - int free_dmach) -{ - int prev_dmach, ch; - - if (dmach == 0) - prev_dmach = NUM_CAMDMA_CHANNELS - 1; - else - prev_dmach = dmach - 1; - omap24xxcam_reg_out(base, CAMDMA_CLNK_CTRL(prev_dmach), - CAMDMA_CLNK_CTRL_ENABLE_LNK | dmach); - /* Did we chain the DMA transfer before the previous one - * finished? - */ - ch = (dmach + free_dmach) % NUM_CAMDMA_CHANNELS; - while (!(omap24xxcam_reg_in(base, CAMDMA_CCR(ch)) - & CAMDMA_CCR_ENABLE)) { - if (ch == dmach) { - /* The previous transfer has ended and this one - * hasn't started, so we must not have chained - * to the previous one in time. We'll have to - * start it now. - */ - omap24xxcam_dmahw_transfer_start(base, dmach); - break; - } else - ch = (ch + 1) % NUM_CAMDMA_CHANNELS; - } -} - -/* Abort all chained DMA transfers. After all transfers have been - * aborted and the DMA controller is idle, the completion routines for - * any aborted transfers will be called in sequence. The DMA - * controller may not be idle after this routine completes, because - * the completion routines might start new transfers. - */ -static void omap24xxcam_dmahw_abort_ch(void __iomem *base, int dmach) -{ - /* mask all interrupts from this channel */ - omap24xxcam_reg_out(base, CAMDMA_CICR(dmach), 0); - /* unlink this channel */ - omap24xxcam_reg_merge(base, CAMDMA_CLNK_CTRL(dmach), 0, - CAMDMA_CLNK_CTRL_ENABLE_LNK); - /* disable this channel */ - omap24xxcam_reg_merge(base, CAMDMA_CCR(dmach), 0, CAMDMA_CCR_ENABLE); -} - -static void omap24xxcam_dmahw_init(void __iomem *base) -{ - omap24xxcam_reg_out(base, CAMDMA_OCP_SYSCONFIG, - CAMDMA_OCP_SYSCONFIG_MIDLEMODE_FSTANDBY - | CAMDMA_OCP_SYSCONFIG_SIDLEMODE_FIDLE - | CAMDMA_OCP_SYSCONFIG_AUTOIDLE); - - omap24xxcam_reg_merge(base, CAMDMA_GCR, 0x10, - CAMDMA_GCR_MAX_CHANNEL_FIFO_DEPTH); - - omap24xxcam_reg_out(base, CAMDMA_IRQENABLE_L0, 0xf); -} - -/* - * - * Individual DMA channel handling. - * - */ - -/* Start a DMA transfer from the camera to memory. - * Returns zero if the transfer was successfully started, or non-zero if all - * DMA channels are already in use or starting is currently inhibited. - */ -static int omap24xxcam_dma_start(struct omap24xxcam_dma *dma, dma_addr_t start, - u32 len, dma_callback_t callback, void *arg) -{ - unsigned long flags; - int dmach; - - spin_lock_irqsave(&dma->lock, flags); - - if (!dma->free_dmach || atomic_read(&dma->dma_stop)) { - spin_unlock_irqrestore(&dma->lock, flags); - return -EBUSY; - } - - dmach = dma->next_dmach; - - dma->ch_state[dmach].callback = callback; - dma->ch_state[dmach].arg = arg; - - omap24xxcam_dmahw_transfer_setup(dma->base, dmach, start, len); - - /* We're ready to start the DMA transfer. */ - - if (dma->free_dmach < NUM_CAMDMA_CHANNELS) { - /* A transfer is already in progress, so try to chain to it. */ - omap24xxcam_dmahw_transfer_chain(dma->base, dmach, - dma->free_dmach); - } else { - /* No transfer is in progress, so we'll just start this one - * now. - */ - omap24xxcam_dmahw_transfer_start(dma->base, dmach); - } - - dma->next_dmach = (dma->next_dmach + 1) % NUM_CAMDMA_CHANNELS; - dma->free_dmach--; - - spin_unlock_irqrestore(&dma->lock, flags); - - return 0; -} - -/* Abort all chained DMA transfers. After all transfers have been - * aborted and the DMA controller is idle, the completion routines for - * any aborted transfers will be called in sequence. The DMA - * controller may not be idle after this routine completes, because - * the completion routines might start new transfers. - */ -static void omap24xxcam_dma_abort(struct omap24xxcam_dma *dma, u32 csr) -{ - unsigned long flags; - int dmach, i, free_dmach; - dma_callback_t callback; - void *arg; - - spin_lock_irqsave(&dma->lock, flags); - - /* stop any DMA transfers in progress */ - dmach = (dma->next_dmach + dma->free_dmach) % NUM_CAMDMA_CHANNELS; - for (i = 0; i < NUM_CAMDMA_CHANNELS; i++) { - omap24xxcam_dmahw_abort_ch(dma->base, dmach); - dmach = (dmach + 1) % NUM_CAMDMA_CHANNELS; - } - - /* We have to be careful here because the callback routine - * might start a new DMA transfer, and we only want to abort - * transfers that were started before this routine was called. - */ - free_dmach = dma->free_dmach; - while ((dma->free_dmach < NUM_CAMDMA_CHANNELS) && - (free_dmach < NUM_CAMDMA_CHANNELS)) { - dmach = (dma->next_dmach + dma->free_dmach) - % NUM_CAMDMA_CHANNELS; - callback = dma->ch_state[dmach].callback; - arg = dma->ch_state[dmach].arg; - dma->free_dmach++; - free_dmach++; - if (callback) { - /* leave interrupts disabled during callback */ - spin_unlock(&dma->lock); - (*callback) (dma, csr, arg); - spin_lock(&dma->lock); - } - } - - spin_unlock_irqrestore(&dma->lock, flags); -} - -/* Abort all chained DMA transfers. After all transfers have been - * aborted and the DMA controller is idle, the completion routines for - * any aborted transfers will be called in sequence. If the completion - * routines attempt to start a new DMA transfer it will fail, so the - * DMA controller will be idle after this routine completes. - */ -static void omap24xxcam_dma_stop(struct omap24xxcam_dma *dma, u32 csr) -{ - atomic_inc(&dma->dma_stop); - omap24xxcam_dma_abort(dma, csr); - atomic_dec(&dma->dma_stop); -} - -/* Camera DMA interrupt service routine. */ -void omap24xxcam_dma_isr(struct omap24xxcam_dma *dma) -{ - int dmach; - dma_callback_t callback; - void *arg; - u32 csr; - const u32 csr_error = CAMDMA_CSR_MISALIGNED_ERR - | CAMDMA_CSR_SUPERVISOR_ERR | CAMDMA_CSR_SECURE_ERR - | CAMDMA_CSR_TRANS_ERR | CAMDMA_CSR_DROP; - - spin_lock(&dma->lock); - - if (dma->free_dmach == NUM_CAMDMA_CHANNELS) { - /* A camera DMA interrupt occurred while all channels - * are idle, so we'll acknowledge the interrupt in the - * IRQSTATUS register and exit. - */ - omap24xxcam_dmahw_ack_all(dma->base); - spin_unlock(&dma->lock); - return; - } - - while (dma->free_dmach < NUM_CAMDMA_CHANNELS) { - dmach = (dma->next_dmach + dma->free_dmach) - % NUM_CAMDMA_CHANNELS; - if (omap24xxcam_dmahw_running(dma->base, dmach)) { - /* This buffer hasn't finished yet, so we're done. */ - break; - } - csr = omap24xxcam_dmahw_ack_ch(dma->base, dmach); - if (csr & csr_error) { - /* A DMA error occurred, so stop all DMA - * transfers in progress. - */ - spin_unlock(&dma->lock); - omap24xxcam_dma_stop(dma, csr); - return; - } else { - callback = dma->ch_state[dmach].callback; - arg = dma->ch_state[dmach].arg; - dma->free_dmach++; - if (callback) { - spin_unlock(&dma->lock); - (*callback) (dma, csr, arg); - spin_lock(&dma->lock); - } - } - } - - spin_unlock(&dma->lock); - - omap24xxcam_sgdma_process( - container_of(dma, struct omap24xxcam_sgdma, dma)); -} - -void omap24xxcam_dma_hwinit(struct omap24xxcam_dma *dma) -{ - unsigned long flags; - - spin_lock_irqsave(&dma->lock, flags); - - omap24xxcam_dmahw_init(dma->base); - - spin_unlock_irqrestore(&dma->lock, flags); -} - -static void omap24xxcam_dma_init(struct omap24xxcam_dma *dma, - void __iomem *base) -{ - int ch; - - /* group all channels on DMA IRQ0 and unmask irq */ - spin_lock_init(&dma->lock); - dma->base = base; - dma->free_dmach = NUM_CAMDMA_CHANNELS; - dma->next_dmach = 0; - for (ch = 0; ch < NUM_CAMDMA_CHANNELS; ch++) { - dma->ch_state[ch].callback = NULL; - dma->ch_state[ch].arg = NULL; - } -} - -/* - * - * Scatter-gather DMA. - * - * High-level DMA construct for transferring whole picture frames to - * memory that is discontinuous. - * - */ - -/* DMA completion routine for the scatter-gather DMA fragments. */ -static void omap24xxcam_sgdma_callback(struct omap24xxcam_dma *dma, u32 csr, - void *arg) -{ - struct omap24xxcam_sgdma *sgdma = - container_of(dma, struct omap24xxcam_sgdma, dma); - int sgslot = (int)arg; - struct sgdma_state *sg_state; - const u32 csr_error = CAMDMA_CSR_MISALIGNED_ERR - | CAMDMA_CSR_SUPERVISOR_ERR | CAMDMA_CSR_SECURE_ERR - | CAMDMA_CSR_TRANS_ERR | CAMDMA_CSR_DROP; - - spin_lock(&sgdma->lock); - - /* We got an interrupt, we can remove the timer */ - del_timer(&sgdma->reset_timer); - - sg_state = sgdma->sg_state + sgslot; - if (!sg_state->queued_sglist) { - spin_unlock(&sgdma->lock); - printk(KERN_ERR "%s: sgdma completed when none queued!\n", - __func__); - return; - } - - sg_state->csr |= csr; - if (!--sg_state->queued_sglist) { - /* Queue for this sglist is empty, so check to see if we're - * done. - */ - if ((sg_state->next_sglist == sg_state->sglen) - || (sg_state->csr & csr_error)) { - sgdma_callback_t callback = sg_state->callback; - void *arg = sg_state->arg; - u32 sg_csr = sg_state->csr; - /* All done with this sglist */ - sgdma->free_sgdma++; - if (callback) { - spin_unlock(&sgdma->lock); - (*callback) (sgdma, sg_csr, arg); - return; - } - } - } - - spin_unlock(&sgdma->lock); -} - -/* Start queued scatter-gather DMA transfers. */ -void omap24xxcam_sgdma_process(struct omap24xxcam_sgdma *sgdma) -{ - unsigned long flags; - int queued_sgdma, sgslot; - struct sgdma_state *sg_state; - const u32 csr_error = CAMDMA_CSR_MISALIGNED_ERR - | CAMDMA_CSR_SUPERVISOR_ERR | CAMDMA_CSR_SECURE_ERR - | CAMDMA_CSR_TRANS_ERR | CAMDMA_CSR_DROP; - - spin_lock_irqsave(&sgdma->lock, flags); - - queued_sgdma = NUM_SG_DMA - sgdma->free_sgdma; - sgslot = (sgdma->next_sgdma + sgdma->free_sgdma) % NUM_SG_DMA; - while (queued_sgdma > 0) { - sg_state = sgdma->sg_state + sgslot; - while ((sg_state->next_sglist < sg_state->sglen) && - !(sg_state->csr & csr_error)) { - const struct scatterlist *sglist; - unsigned int len; - - sglist = sg_state->sglist + sg_state->next_sglist; - /* try to start the next DMA transfer */ - if (sg_state->next_sglist + 1 == sg_state->sglen) { - /* - * On the last sg, we handle the case where - * cam->img.pix.sizeimage % PAGE_ALIGN != 0 - */ - len = sg_state->len - sg_state->bytes_read; - } else { - len = sg_dma_len(sglist); - } - - if (omap24xxcam_dma_start(&sgdma->dma, - sg_dma_address(sglist), - len, - omap24xxcam_sgdma_callback, - (void *)sgslot)) { - /* DMA start failed */ - spin_unlock_irqrestore(&sgdma->lock, flags); - return; - } else { - unsigned long expires; - /* DMA start was successful */ - sg_state->next_sglist++; - sg_state->bytes_read += len; - sg_state->queued_sglist++; - - /* We start the reset timer */ - expires = jiffies + HZ; - mod_timer(&sgdma->reset_timer, expires); - } - } - queued_sgdma--; - sgslot = (sgslot + 1) % NUM_SG_DMA; - } - - spin_unlock_irqrestore(&sgdma->lock, flags); -} - -/* - * Queue a scatter-gather DMA transfer from the camera to memory. - * Returns zero if the transfer was successfully queued, or non-zero - * if all of the scatter-gather slots are already in use. - */ -int omap24xxcam_sgdma_queue(struct omap24xxcam_sgdma *sgdma, - const struct scatterlist *sglist, int sglen, - int len, sgdma_callback_t callback, void *arg) -{ - unsigned long flags; - struct sgdma_state *sg_state; - - if ((sglen < 0) || ((sglen > 0) && !sglist)) - return -EINVAL; - - spin_lock_irqsave(&sgdma->lock, flags); - - if (!sgdma->free_sgdma) { - spin_unlock_irqrestore(&sgdma->lock, flags); - return -EBUSY; - } - - sg_state = sgdma->sg_state + sgdma->next_sgdma; - - sg_state->sglist = sglist; - sg_state->sglen = sglen; - sg_state->next_sglist = 0; - sg_state->bytes_read = 0; - sg_state->len = len; - sg_state->queued_sglist = 0; - sg_state->csr = 0; - sg_state->callback = callback; - sg_state->arg = arg; - - sgdma->next_sgdma = (sgdma->next_sgdma + 1) % NUM_SG_DMA; - sgdma->free_sgdma--; - - spin_unlock_irqrestore(&sgdma->lock, flags); - - omap24xxcam_sgdma_process(sgdma); - - return 0; -} - -/* Sync scatter-gather DMA by aborting any DMA transfers currently in progress. - * Any queued scatter-gather DMA transactions that have not yet been started - * will remain queued. The DMA controller will be idle after this routine - * completes. When the scatter-gather queue is restarted, the next - * scatter-gather DMA transfer will begin at the start of a new transaction. - */ -void omap24xxcam_sgdma_sync(struct omap24xxcam_sgdma *sgdma) -{ - unsigned long flags; - int sgslot; - struct sgdma_state *sg_state; - u32 csr = CAMDMA_CSR_TRANS_ERR; - - /* stop any DMA transfers in progress */ - omap24xxcam_dma_stop(&sgdma->dma, csr); - - spin_lock_irqsave(&sgdma->lock, flags); - - if (sgdma->free_sgdma < NUM_SG_DMA) { - sgslot = (sgdma->next_sgdma + sgdma->free_sgdma) % NUM_SG_DMA; - sg_state = sgdma->sg_state + sgslot; - if (sg_state->next_sglist != 0) { - /* This DMA transfer was in progress, so abort it. */ - sgdma_callback_t callback = sg_state->callback; - void *arg = sg_state->arg; - sgdma->free_sgdma++; - if (callback) { - /* leave interrupts masked */ - spin_unlock(&sgdma->lock); - (*callback) (sgdma, csr, arg); - spin_lock(&sgdma->lock); - } - } - } - - spin_unlock_irqrestore(&sgdma->lock, flags); -} - -void omap24xxcam_sgdma_init(struct omap24xxcam_sgdma *sgdma, - void __iomem *base, - void (*reset_callback)(unsigned long data), - unsigned long reset_callback_data) -{ - int sg; - - spin_lock_init(&sgdma->lock); - sgdma->free_sgdma = NUM_SG_DMA; - sgdma->next_sgdma = 0; - for (sg = 0; sg < NUM_SG_DMA; sg++) { - sgdma->sg_state[sg].sglen = 0; - sgdma->sg_state[sg].next_sglist = 0; - sgdma->sg_state[sg].bytes_read = 0; - sgdma->sg_state[sg].queued_sglist = 0; - sgdma->sg_state[sg].csr = 0; - sgdma->sg_state[sg].callback = NULL; - sgdma->sg_state[sg].arg = NULL; - } - - omap24xxcam_dma_init(&sgdma->dma, base); - setup_timer(&sgdma->reset_timer, reset_callback, reset_callback_data); -} |