summaryrefslogtreecommitdiffstats
path: root/drivers/media/video/mt9v022.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/video/mt9v022.c')
-rw-r--r--drivers/media/video/mt9v022.c205
1 files changed, 82 insertions, 123 deletions
diff --git a/drivers/media/video/mt9v022.c b/drivers/media/video/mt9v022.c
index b04c8cb1644d..4d3b4813c322 100644
--- a/drivers/media/video/mt9v022.c
+++ b/drivers/media/video/mt9v022.c
@@ -13,7 +13,6 @@
#include <linux/i2c.h>
#include <linux/delay.h>
#include <linux/log2.h>
-#include <linux/gpio.h>
#include <media/v4l2-common.h>
#include <media/v4l2-chip-ident.h>
@@ -89,9 +88,7 @@ struct mt9v022 {
struct i2c_client *client;
struct soc_camera_device icd;
int model; /* V4L2_IDENT_MT9V022* codes from v4l2-chip-ident.h */
- int switch_gpio;
u16 chip_control;
- unsigned char datawidth;
};
static int reg_read(struct soc_camera_device *icd, const u8 reg)
@@ -209,66 +206,6 @@ static int mt9v022_stop_capture(struct soc_camera_device *icd)
return 0;
}
-static int bus_switch_request(struct mt9v022 *mt9v022, struct soc_camera_link *icl)
-{
-#ifdef CONFIG_MT9V022_PCA9536_SWITCH
- int ret;
- unsigned int gpio = icl->gpio;
-
- if (gpio_is_valid(gpio)) {
- /* We have a data bus switch. */
- ret = gpio_request(gpio, "mt9v022");
- if (ret < 0) {
- dev_err(&mt9v022->client->dev, "Cannot get GPIO %u\n", gpio);
- return ret;
- }
-
- ret = gpio_direction_output(gpio, 0);
- if (ret < 0) {
- dev_err(&mt9v022->client->dev,
- "Cannot set GPIO %u to output\n", gpio);
- gpio_free(gpio);
- return ret;
- }
- }
-
- mt9v022->switch_gpio = gpio;
-#else
- mt9v022->switch_gpio = -EINVAL;
-#endif
- return 0;
-}
-
-static void bus_switch_release(struct mt9v022 *mt9v022)
-{
-#ifdef CONFIG_MT9V022_PCA9536_SWITCH
- if (gpio_is_valid(mt9v022->switch_gpio))
- gpio_free(mt9v022->switch_gpio);
-#endif
-}
-
-static int bus_switch_act(struct mt9v022 *mt9v022, int go8bit)
-{
-#ifdef CONFIG_MT9V022_PCA9536_SWITCH
- if (!gpio_is_valid(mt9v022->switch_gpio))
- return -ENODEV;
-
- gpio_set_value_cansleep(mt9v022->switch_gpio, go8bit);
- return 0;
-#else
- return -ENODEV;
-#endif
-}
-
-static int bus_switch_possible(struct mt9v022 *mt9v022)
-{
-#ifdef CONFIG_MT9V022_PCA9536_SWITCH
- return gpio_is_valid(mt9v022->switch_gpio);
-#else
- return 0;
-#endif
-}
-
static int mt9v022_set_bus_param(struct soc_camera_device *icd,
unsigned long flags)
{
@@ -282,19 +219,17 @@ static int mt9v022_set_bus_param(struct soc_camera_device *icd,
if (!is_power_of_2(width_flag))
return -EINVAL;
- if ((mt9v022->datawidth != 10 && (width_flag == SOCAM_DATAWIDTH_10)) ||
- (mt9v022->datawidth != 9 && (width_flag == SOCAM_DATAWIDTH_9)) ||
- (mt9v022->datawidth != 8 && (width_flag == SOCAM_DATAWIDTH_8))) {
- /* Well, we actually only can do 10 or 8 bits... */
- if (width_flag == SOCAM_DATAWIDTH_9)
- return -EINVAL;
-
- ret = bus_switch_act(mt9v022,
- width_flag == SOCAM_DATAWIDTH_8);
- if (ret < 0)
+ if (icl->set_bus_param) {
+ ret = icl->set_bus_param(icl, width_flag);
+ if (ret)
return ret;
-
- mt9v022->datawidth = width_flag == SOCAM_DATAWIDTH_8 ? 8 : 10;
+ } else {
+ /*
+ * Without board specific bus width settings we only support the
+ * sensors native bus width
+ */
+ if (width_flag != SOCAM_DATAWIDTH_10)
+ return -EINVAL;
}
flags = soc_camera_apply_sensor_flags(icl, flags);
@@ -328,44 +263,27 @@ static int mt9v022_set_bus_param(struct soc_camera_device *icd,
static unsigned long mt9v022_query_bus_param(struct soc_camera_device *icd)
{
struct mt9v022 *mt9v022 = container_of(icd, struct mt9v022, icd);
- unsigned int width_flag = SOCAM_DATAWIDTH_10;
+ struct soc_camera_link *icl = mt9v022->client->dev.platform_data;
+ unsigned int width_flag;
- if (bus_switch_possible(mt9v022))
- width_flag |= SOCAM_DATAWIDTH_8;
+ if (icl->query_bus_param)
+ width_flag = icl->query_bus_param(icl) &
+ SOCAM_DATAWIDTH_MASK;
+ else
+ width_flag = SOCAM_DATAWIDTH_10;
return SOCAM_PCLK_SAMPLE_RISING | SOCAM_PCLK_SAMPLE_FALLING |
SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_HSYNC_ACTIVE_LOW |
SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_LOW |
- SOCAM_MASTER | SOCAM_SLAVE |
+ SOCAM_DATA_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_SLAVE |
width_flag;
}
-static int mt9v022_set_fmt(struct soc_camera_device *icd,
- __u32 pixfmt, struct v4l2_rect *rect)
+static int mt9v022_set_crop(struct soc_camera_device *icd,
+ struct v4l2_rect *rect)
{
- struct mt9v022 *mt9v022 = container_of(icd, struct mt9v022, icd);
int ret;
- /* The caller provides a supported format, as verified per call to
- * icd->try_fmt(), datawidth is from our supported format list */
- switch (pixfmt) {
- case V4L2_PIX_FMT_GREY:
- case V4L2_PIX_FMT_Y16:
- if (mt9v022->model != V4L2_IDENT_MT9V022IX7ATM)
- return -EINVAL;
- break;
- case V4L2_PIX_FMT_SBGGR8:
- case V4L2_PIX_FMT_SBGGR16:
- if (mt9v022->model != V4L2_IDENT_MT9V022IX7ATC)
- return -EINVAL;
- break;
- case 0:
- /* No format change, only geometry */
- break;
- default:
- return -EINVAL;
- }
-
/* Like in example app. Contradicts the datasheet though */
ret = reg_read(icd, MT9V022_AEC_AGC_ENABLE);
if (ret >= 0) {
@@ -403,6 +321,42 @@ static int mt9v022_set_fmt(struct soc_camera_device *icd,
return 0;
}
+static int mt9v022_set_fmt(struct soc_camera_device *icd,
+ struct v4l2_format *f)
+{
+ struct mt9v022 *mt9v022 = container_of(icd, struct mt9v022, icd);
+ struct v4l2_pix_format *pix = &f->fmt.pix;
+ struct v4l2_rect rect = {
+ .left = icd->x_current,
+ .top = icd->y_current,
+ .width = pix->width,
+ .height = pix->height,
+ };
+
+ /* The caller provides a supported format, as verified per call to
+ * icd->try_fmt(), datawidth is from our supported format list */
+ switch (pix->pixelformat) {
+ case V4L2_PIX_FMT_GREY:
+ case V4L2_PIX_FMT_Y16:
+ if (mt9v022->model != V4L2_IDENT_MT9V022IX7ATM)
+ return -EINVAL;
+ break;
+ case V4L2_PIX_FMT_SBGGR8:
+ case V4L2_PIX_FMT_SBGGR16:
+ if (mt9v022->model != V4L2_IDENT_MT9V022IX7ATC)
+ return -EINVAL;
+ break;
+ case 0:
+ /* No format change, only geometry */
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* No support for scaling on this camera, just crop. */
+ return mt9v022_set_crop(icd, &rect);
+}
+
static int mt9v022_try_fmt(struct soc_camera_device *icd,
struct v4l2_format *f)
{
@@ -544,6 +498,7 @@ static struct soc_camera_ops mt9v022_ops = {
.release = mt9v022_release,
.start_capture = mt9v022_start_capture,
.stop_capture = mt9v022_stop_capture,
+ .set_crop = mt9v022_set_crop,
.set_fmt = mt9v022_set_fmt,
.try_fmt = mt9v022_try_fmt,
.set_bus_param = mt9v022_set_bus_param,
@@ -699,6 +654,7 @@ static int mt9v022_video_probe(struct soc_camera_device *icd)
struct soc_camera_link *icl = mt9v022->client->dev.platform_data;
s32 data;
int ret;
+ unsigned long flags;
if (!icd->dev.parent ||
to_soc_camera_host(icd->dev.parent)->nr != icd->iface)
@@ -732,22 +688,36 @@ static int mt9v022_video_probe(struct soc_camera_device *icd)
ret = reg_write(icd, MT9V022_PIXEL_OPERATION_MODE, 4 | 0x11);
mt9v022->model = V4L2_IDENT_MT9V022IX7ATC;
icd->formats = mt9v022_colour_formats;
- if (gpio_is_valid(icl->gpio))
- icd->num_formats = ARRAY_SIZE(mt9v022_colour_formats);
- else
- icd->num_formats = 1;
} else {
ret = reg_write(icd, MT9V022_PIXEL_OPERATION_MODE, 0x11);
mt9v022->model = V4L2_IDENT_MT9V022IX7ATM;
icd->formats = mt9v022_monochrome_formats;
- if (gpio_is_valid(icl->gpio))
- icd->num_formats = ARRAY_SIZE(mt9v022_monochrome_formats);
- else
- icd->num_formats = 1;
}
- if (!ret)
- ret = soc_camera_video_start(icd);
+ if (ret < 0)
+ goto eisis;
+
+ icd->num_formats = 0;
+
+ /*
+ * This is a 10bit sensor, so by default we only allow 10bit.
+ * The platform may support different bus widths due to
+ * different routing of the data lines.
+ */
+ if (icl->query_bus_param)
+ flags = icl->query_bus_param(icl);
+ else
+ flags = SOCAM_DATAWIDTH_10;
+
+ if (flags & SOCAM_DATAWIDTH_10)
+ icd->num_formats++;
+ else
+ icd->formats++;
+
+ if (flags & SOCAM_DATAWIDTH_8)
+ icd->num_formats++;
+
+ ret = soc_camera_video_start(icd);
if (ret < 0)
goto eisis;
@@ -812,14 +782,6 @@ static int mt9v022_probe(struct i2c_client *client,
icd->height_max = 480;
icd->y_skip_top = 1;
icd->iface = icl->bus_id;
- /* Default datawidth - this is the only width this camera (normally)
- * supports. It is only with extra logic that it can support
- * other widths. Therefore it seems to be a sensible default. */
- mt9v022->datawidth = 10;
-
- ret = bus_switch_request(mt9v022, icl);
- if (ret)
- goto eswinit;
ret = soc_camera_device_register(icd);
if (ret)
@@ -828,8 +790,6 @@ static int mt9v022_probe(struct i2c_client *client,
return 0;
eisdr:
- bus_switch_release(mt9v022);
-eswinit:
kfree(mt9v022);
return ret;
}
@@ -839,7 +799,6 @@ static int mt9v022_remove(struct i2c_client *client)
struct mt9v022 *mt9v022 = i2c_get_clientdata(client);
soc_camera_device_unregister(&mt9v022->icd);
- bus_switch_release(mt9v022);
kfree(mt9v022);
return 0;