summaryrefslogtreecommitdiffstats
path: root/drivers/media
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media')
-rw-r--r--drivers/media/i2c/ov5640.c365
1 files changed, 364 insertions, 1 deletions
diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
index 807bd0e386a4..4254ac958424 100644
--- a/drivers/media/i2c/ov5640.c
+++ b/drivers/media/i2c/ov5640.c
@@ -176,6 +176,7 @@ struct ov5640_mode_info {
u32 htot;
u32 vact;
u32 vtot;
+ u32 pixel_clock;
const struct reg_value *reg_data;
u32 reg_data_size;
};
@@ -701,6 +702,7 @@ static const struct reg_value ov5640_setting_15fps_QSXGA_2592_1944[] = {
/* power-on sensor init reg table */
static const struct ov5640_mode_info ov5640_mode_init_data = {
0, SUBSAMPLING, 640, 1896, 480, 984,
+ 56000000,
ov5640_init_setting_30fps_VGA,
ARRAY_SIZE(ov5640_init_setting_30fps_VGA),
};
@@ -710,74 +712,91 @@ ov5640_mode_data[OV5640_NUM_FRAMERATES][OV5640_NUM_MODES] = {
{
{OV5640_MODE_QCIF_176_144, SUBSAMPLING,
176, 1896, 144, 984,
+ 28000000,
ov5640_setting_15fps_QCIF_176_144,
ARRAY_SIZE(ov5640_setting_15fps_QCIF_176_144)},
{OV5640_MODE_QVGA_320_240, SUBSAMPLING,
320, 1896, 240, 984,
+ 28000000,
ov5640_setting_15fps_QVGA_320_240,
ARRAY_SIZE(ov5640_setting_15fps_QVGA_320_240)},
{OV5640_MODE_VGA_640_480, SUBSAMPLING,
640, 1896, 480, 1080,
+ 28000000,
ov5640_setting_15fps_VGA_640_480,
ARRAY_SIZE(ov5640_setting_15fps_VGA_640_480)},
{OV5640_MODE_NTSC_720_480, SUBSAMPLING,
720, 1896, 480, 984,
+ 28000000,
ov5640_setting_15fps_NTSC_720_480,
ARRAY_SIZE(ov5640_setting_15fps_NTSC_720_480)},
{OV5640_MODE_PAL_720_576, SUBSAMPLING,
720, 1896, 576, 984,
+ 28000000,
ov5640_setting_15fps_PAL_720_576,
ARRAY_SIZE(ov5640_setting_15fps_PAL_720_576)},
{OV5640_MODE_XGA_1024_768, SUBSAMPLING,
1024, 1896, 768, 1080,
+ 28000000,
ov5640_setting_15fps_XGA_1024_768,
ARRAY_SIZE(ov5640_setting_15fps_XGA_1024_768)},
{OV5640_MODE_720P_1280_720, SUBSAMPLING,
1280, 1892, 720, 740,
+ 21000000,
ov5640_setting_15fps_720P_1280_720,
ARRAY_SIZE(ov5640_setting_15fps_720P_1280_720)},
{OV5640_MODE_1080P_1920_1080, SCALING,
1920, 2500, 1080, 1120,
+ 42000000,
ov5640_setting_15fps_1080P_1920_1080,
ARRAY_SIZE(ov5640_setting_15fps_1080P_1920_1080)},
{OV5640_MODE_QSXGA_2592_1944, SCALING,
2592, 2844, 1944, 1968,
+ 84000000,
ov5640_setting_15fps_QSXGA_2592_1944,
ARRAY_SIZE(ov5640_setting_15fps_QSXGA_2592_1944)},
}, {
{OV5640_MODE_QCIF_176_144, SUBSAMPLING,
176, 1896, 144, 984,
+ 56000000,
ov5640_setting_30fps_QCIF_176_144,
ARRAY_SIZE(ov5640_setting_30fps_QCIF_176_144)},
{OV5640_MODE_QVGA_320_240, SUBSAMPLING,
320, 1896, 240, 984,
+ 56000000,
ov5640_setting_30fps_QVGA_320_240,
ARRAY_SIZE(ov5640_setting_30fps_QVGA_320_240)},
{OV5640_MODE_VGA_640_480, SUBSAMPLING,
640, 1896, 480, 1080,
+ 56000000,
ov5640_setting_30fps_VGA_640_480,
ARRAY_SIZE(ov5640_setting_30fps_VGA_640_480)},
{OV5640_MODE_NTSC_720_480, SUBSAMPLING,
720, 1896, 480, 984,
+ 56000000,
ov5640_setting_30fps_NTSC_720_480,
ARRAY_SIZE(ov5640_setting_30fps_NTSC_720_480)},
{OV5640_MODE_PAL_720_576, SUBSAMPLING,
720, 1896, 576, 984,
+ 56000000,
ov5640_setting_30fps_PAL_720_576,
ARRAY_SIZE(ov5640_setting_30fps_PAL_720_576)},
{OV5640_MODE_XGA_1024_768, SUBSAMPLING,
1024, 1896, 768, 1080,
+ 56000000,
ov5640_setting_30fps_XGA_1024_768,
ARRAY_SIZE(ov5640_setting_30fps_XGA_1024_768)},
{OV5640_MODE_720P_1280_720, SUBSAMPLING,
1280, 1892, 720, 740,
+ 42000000,
ov5640_setting_30fps_720P_1280_720,
ARRAY_SIZE(ov5640_setting_30fps_720P_1280_720)},
{OV5640_MODE_1080P_1920_1080, SCALING,
1920, 2500, 1080, 1120,
+ 84000000,
ov5640_setting_30fps_1080P_1920_1080,
ARRAY_SIZE(ov5640_setting_30fps_1080P_1920_1080)},
- {OV5640_MODE_QSXGA_2592_1944, -1, 0, 0, 0, 0, NULL, 0},
+ {OV5640_MODE_QSXGA_2592_1944, -1, 0, 0, 0, 0, 0, NULL, 0},
},
};
@@ -910,6 +929,333 @@ static int ov5640_mod_reg(struct ov5640_dev *sensor, u16 reg,
return ov5640_write_reg(sensor, reg, val);
}
+/*
+ * After trying the various combinations, reading various
+ * documentations spreaded around the net, and from the various
+ * feedback, the clock tree is probably as follows:
+ *
+ * +--------------+
+ * | Ext. Clock |
+ * +-+------------+
+ * | +----------+
+ * +->| PLL1 | - reg 0x3036, for the multiplier
+ * +-+--------+ - reg 0x3037, bits 0-3 for the pre-divider
+ * | +--------------+
+ * +->| System Clock | - reg 0x3035, bits 4-7
+ * +-+------------+
+ * | +--------------+
+ * +->| MIPI Divider | - reg 0x3035, bits 0-3
+ * | +-+------------+
+ * | +----------------> MIPI SCLK
+ * | + +-----+
+ * | +->| / 2 |-------> MIPI BIT CLK
+ * | +-----+
+ * | +--------------+
+ * +->| PLL Root Div | - reg 0x3037, bit 4
+ * +-+------------+
+ * | +---------+
+ * +->| Bit Div | - reg 0x3035, bits 0-3
+ * +-+-------+
+ * | +-------------+
+ * +->| SCLK Div | - reg 0x3108, bits 0-1
+ * | +-+-----------+
+ * | +---------------> SCLK
+ * | +-------------+
+ * +->| SCLK 2X Div | - reg 0x3108, bits 2-3
+ * | +-+-----------+
+ * | +---------------> SCLK 2X
+ * | +-------------+
+ * +->| PCLK Div | - reg 0x3108, bits 4-5
+ * ++------------+
+ * + +-----------+
+ * +->| P_DIV | - reg 0x3035, bits 0-3
+ * +-----+-----+
+ * +------------> PCLK
+ *
+ * This is deviating from the datasheet at least for the register
+ * 0x3108, since it's said here that the PCLK would be clocked from
+ * the PLL.
+ *
+ * There seems to be also (unverified) constraints:
+ * - the PLL pre-divider output rate should be in the 4-27MHz range
+ * - the PLL multiplier output rate should be in the 500-1000MHz range
+ * - PCLK >= SCLK * 2 in YUV, >= SCLK in Raw or JPEG
+ *
+ * In the two latter cases, these constraints are met since our
+ * factors are hardcoded. If we were to change that, we would need to
+ * take this into account. The only varying parts are the PLL
+ * multiplier and the system clock divider, which are shared between
+ * all these clocks so won't cause any issue.
+ */
+
+/*
+ * This is supposed to be ranging from 1 to 8, but the value is always
+ * set to 3 in the vendor kernels.
+ */
+#define OV5640_PLL_PREDIV 3
+
+#define OV5640_PLL_MULT_MIN 4
+#define OV5640_PLL_MULT_MAX 252
+
+/*
+ * This is supposed to be ranging from 1 to 16, but the value is
+ * always set to either 1 or 2 in the vendor kernels.
+ */
+#define OV5640_SYSDIV_MIN 1
+#define OV5640_SYSDIV_MAX 16
+
+/*
+ * Hardcode these values for scaler and non-scaler modes.
+ * FIXME: to be re-calcualted for 1 data lanes setups
+ */
+#define OV5640_MIPI_DIV_PCLK 2
+#define OV5640_MIPI_DIV_SCLK 1
+
+/*
+ * This is supposed to be ranging from 1 to 2, but the value is always
+ * set to 2 in the vendor kernels.
+ */
+#define OV5640_PLL_ROOT_DIV 2
+#define OV5640_PLL_CTRL3_PLL_ROOT_DIV_2 BIT(4)
+
+/*
+ * We only supports 8-bit formats at the moment
+ */
+#define OV5640_BIT_DIV 2
+#define OV5640_PLL_CTRL0_MIPI_MODE_8BIT 0x08
+
+/*
+ * This is supposed to be ranging from 1 to 8, but the value is always
+ * set to 2 in the vendor kernels.
+ */
+#define OV5640_SCLK_ROOT_DIV 2
+
+/*
+ * This is hardcoded so that the consistency is maintained between SCLK and
+ * SCLK 2x.
+ */
+#define OV5640_SCLK2X_ROOT_DIV (OV5640_SCLK_ROOT_DIV / 2)
+
+/*
+ * This is supposed to be ranging from 1 to 8, but the value is always
+ * set to 1 in the vendor kernels.
+ */
+#define OV5640_PCLK_ROOT_DIV 1
+#define OV5640_PLL_SYS_ROOT_DIVIDER_BYPASS 0x00
+
+static unsigned long ov5640_compute_sys_clk(struct ov5640_dev *sensor,
+ u8 pll_prediv, u8 pll_mult,
+ u8 sysdiv)
+{
+ unsigned long sysclk = sensor->xclk_freq / pll_prediv * pll_mult;
+
+ /* PLL1 output cannot exceed 1GHz. */
+ if (sysclk / 1000000 > 1000)
+ return 0;
+
+ return sysclk / sysdiv;
+}
+
+static unsigned long ov5640_calc_sys_clk(struct ov5640_dev *sensor,
+ unsigned long rate,
+ u8 *pll_prediv, u8 *pll_mult,
+ u8 *sysdiv)
+{
+ unsigned long best = ~0;
+ u8 best_sysdiv = 1, best_mult = 1;
+ u8 _sysdiv, _pll_mult;
+
+ for (_sysdiv = OV5640_SYSDIV_MIN;
+ _sysdiv <= OV5640_SYSDIV_MAX;
+ _sysdiv++) {
+ for (_pll_mult = OV5640_PLL_MULT_MIN;
+ _pll_mult <= OV5640_PLL_MULT_MAX;
+ _pll_mult++) {
+ unsigned long _rate;
+
+ /*
+ * The PLL multiplier cannot be odd if above
+ * 127.
+ */
+ if (_pll_mult > 127 && (_pll_mult % 2))
+ continue;
+
+ _rate = ov5640_compute_sys_clk(sensor,
+ OV5640_PLL_PREDIV,
+ _pll_mult, _sysdiv);
+
+ /*
+ * We have reached the maximum allowed PLL1 output,
+ * increase sysdiv.
+ */
+ if (!rate)
+ break;
+
+ /*
+ * Prefer rates above the expected clock rate than
+ * below, even if that means being less precise.
+ */
+ if (_rate < rate)
+ continue;
+
+ if (abs(rate - _rate) < abs(rate - best)) {
+ best = _rate;
+ best_sysdiv = _sysdiv;
+ best_mult = _pll_mult;
+ }
+
+ if (_rate == rate)
+ goto out;
+ }
+ }
+
+out:
+ *sysdiv = best_sysdiv;
+ *pll_prediv = OV5640_PLL_PREDIV;
+ *pll_mult = best_mult;
+
+ return best;
+}
+
+/*
+ * ov5640_set_mipi_pclk() - Calculate the clock tree configuration values
+ * for the MIPI CSI-2 output.
+ *
+ * @rate: The requested bandwidth per lane in bytes per second.
+ * 'Bandwidth Per Lane' is calculated as:
+ * bpl = HTOT * VTOT * FPS * bpp / num_lanes;
+ *
+ * This function use the requested bandwidth to calculate:
+ * - sample_rate = bpl / (bpp / num_lanes);
+ * = bpl / (PLL_RDIV * BIT_DIV * PCLK_DIV * MIPI_DIV / num_lanes);
+ *
+ * - mipi_sclk = bpl / MIPI_DIV / 2; ( / 2 is for CSI-2 DDR)
+ *
+ * with these fixed parameters:
+ * PLL_RDIV = 2;
+ * BIT_DIVIDER = 2; (MIPI_BIT_MODE == 8 ? 2 : 2,5);
+ * PCLK_DIV = 1;
+ *
+ * The MIPI clock generation differs for modes that use the scaler and modes
+ * that do not. In case the scaler is in use, the MIPI_SCLK generates the MIPI
+ * BIT CLk, and thus:
+ *
+ * - mipi_sclk = bpl / MIPI_DIV / 2;
+ * MIPI_DIV = 1;
+ *
+ * For modes that do not go through the scaler, the MIPI BIT CLOCK is generated
+ * from the pixel clock, and thus:
+ *
+ * - sample_rate = bpl / (bpp / num_lanes);
+ * = bpl / (2 * 2 * 1 * MIPI_DIV / num_lanes);
+ * = bpl / (4 * MIPI_DIV / num_lanes);
+ * - MIPI_DIV = bpp / (4 * num_lanes);
+ *
+ * FIXME: this have been tested with 16bpp and 2 lanes setup only.
+ * MIPI_DIV is fixed to value 2, but it -might- be changed according to the
+ * above formula for setups with 1 lane or image formats with different bpp.
+ *
+ * FIXME: this deviates from the sensor manual documentation which is quite
+ * thin on the MIPI clock tree generation part.
+ */
+static int ov5640_set_mipi_pclk(struct ov5640_dev *sensor,
+ unsigned long rate)
+{
+ const struct ov5640_mode_info *mode = sensor->current_mode;
+ u8 prediv, mult, sysdiv;
+ u8 mipi_div;
+ int ret;
+
+ /*
+ * 1280x720 is reported to use 'SUBSAMPLING' only,
+ * but according to the sensor manual it goes through the
+ * scaler before subsampling.
+ */
+ if (mode->dn_mode == SCALING ||
+ (mode->id == OV5640_MODE_720P_1280_720))
+ mipi_div = OV5640_MIPI_DIV_SCLK;
+ else
+ mipi_div = OV5640_MIPI_DIV_PCLK;
+
+ ov5640_calc_sys_clk(sensor, rate, &prediv, &mult, &sysdiv);
+
+ ret = ov5640_mod_reg(sensor, OV5640_REG_SC_PLL_CTRL0,
+ 0x0f, OV5640_PLL_CTRL0_MIPI_MODE_8BIT);
+
+ ret = ov5640_mod_reg(sensor, OV5640_REG_SC_PLL_CTRL1,
+ 0xff, sysdiv << 4 | mipi_div);
+ if (ret)
+ return ret;
+
+ ret = ov5640_mod_reg(sensor, OV5640_REG_SC_PLL_CTRL2, 0xff, mult);
+ if (ret)
+ return ret;
+
+ ret = ov5640_mod_reg(sensor, OV5640_REG_SC_PLL_CTRL3,
+ 0x1f, OV5640_PLL_CTRL3_PLL_ROOT_DIV_2 | prediv);
+ if (ret)
+ return ret;
+
+ return ov5640_mod_reg(sensor, OV5640_REG_SYS_ROOT_DIVIDER,
+ 0x30, OV5640_PLL_SYS_ROOT_DIVIDER_BYPASS);
+}
+
+static unsigned long ov5640_calc_pclk(struct ov5640_dev *sensor,
+ unsigned long rate,
+ u8 *pll_prediv, u8 *pll_mult, u8 *sysdiv,
+ u8 *pll_rdiv, u8 *bit_div, u8 *pclk_div)
+{
+ unsigned long _rate = rate * OV5640_PLL_ROOT_DIV * OV5640_BIT_DIV *
+ OV5640_PCLK_ROOT_DIV;
+
+ _rate = ov5640_calc_sys_clk(sensor, _rate, pll_prediv, pll_mult,
+ sysdiv);
+ *pll_rdiv = OV5640_PLL_ROOT_DIV;
+ *bit_div = OV5640_BIT_DIV;
+ *pclk_div = OV5640_PCLK_ROOT_DIV;
+
+ return _rate / *pll_rdiv / *bit_div / *pclk_div;
+}
+
+static int ov5640_set_dvp_pclk(struct ov5640_dev *sensor, unsigned long rate)
+{
+ u8 prediv, mult, sysdiv, pll_rdiv, bit_div, pclk_div;
+ int ret;
+
+ ov5640_calc_pclk(sensor, rate, &prediv, &mult, &sysdiv, &pll_rdiv,
+ &bit_div, &pclk_div);
+
+ if (bit_div == 2)
+ bit_div = 8;
+
+ ret = ov5640_mod_reg(sensor, OV5640_REG_SC_PLL_CTRL0,
+ 0x0f, bit_div);
+ if (ret)
+ return ret;
+
+ /*
+ * We need to set sysdiv according to the clock, and to clear
+ * the MIPI divider.
+ */
+ ret = ov5640_mod_reg(sensor, OV5640_REG_SC_PLL_CTRL1,
+ 0xff, sysdiv << 4);
+ if (ret)
+ return ret;
+
+ ret = ov5640_mod_reg(sensor, OV5640_REG_SC_PLL_CTRL2,
+ 0xff, mult);
+ if (ret)
+ return ret;
+
+ ret = ov5640_mod_reg(sensor, OV5640_REG_SC_PLL_CTRL3,
+ 0x1f, prediv | ((pll_rdiv - 1) << 4));
+ if (ret)
+ return ret;
+
+ return ov5640_mod_reg(sensor, OV5640_REG_SYS_ROOT_DIVIDER, 0x30,
+ (ilog2(pclk_div) << 4));
+}
+
/* download ov5640 settings to sensor through i2c */
static int ov5640_set_timings(struct ov5640_dev *sensor,
const struct ov5640_mode_info *mode)
@@ -1638,6 +1984,7 @@ static int ov5640_set_mode(struct ov5640_dev *sensor)
enum ov5640_downsize_mode dn_mode, orig_dn_mode;
bool auto_gain = sensor->ctrls.auto_gain->val == 1;
bool auto_exp = sensor->ctrls.auto_exp->val == V4L2_EXPOSURE_AUTO;
+ unsigned long rate;
int ret;
dn_mode = mode->dn_mode;
@@ -1656,6 +2003,22 @@ static int ov5640_set_mode(struct ov5640_dev *sensor)
goto restore_auto_gain;
}
+ /*
+ * All the formats we support have 16 bits per pixel, seems to require
+ * the same rate than YUV, so we can just use 16 bpp all the time.
+ */
+ rate = mode->pixel_clock * 16;
+ if (sensor->ep.bus_type == V4L2_MBUS_CSI2_DPHY) {
+ rate = rate / sensor->ep.bus.mipi_csi2.num_data_lanes;
+ ret = ov5640_set_mipi_pclk(sensor, rate);
+ } else {
+ rate = rate / sensor->ep.bus.parallel.bus_width;
+ ret = ov5640_set_dvp_pclk(sensor, rate);
+ }
+
+ if (ret < 0)
+ return 0;
+
if ((dn_mode == SUBSAMPLING && orig_dn_mode == SCALING) ||
(dn_mode == SCALING && orig_dn_mode == SUBSAMPLING)) {
/*
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 17:15:52 +0000