diff options
Diffstat (limited to 'drivers/mfd/omap-usb-tll.c')
| -rw-r--r-- | drivers/mfd/omap-usb-tll.c | 471 |
1 files changed, 471 insertions, 0 deletions
diff --git a/drivers/mfd/omap-usb-tll.c b/drivers/mfd/omap-usb-tll.c new file mode 100644 index 000000000000..4b7757b84301 --- /dev/null +++ b/drivers/mfd/omap-usb-tll.c @@ -0,0 +1,471 @@ +/** + * omap-usb-tll.c - The USB TLL driver for OMAP EHCI & OHCI + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com + * Author: Keshava Munegowda <keshava_mgowda@ti.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 of + * the License as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/err.h> +#include <plat/usb.h> +#include <linux/pm_runtime.h> + +#define USBTLL_DRIVER_NAME "usbhs_tll" + +/* TLL Register Set */ +#define OMAP_USBTLL_REVISION (0x00) +#define OMAP_USBTLL_SYSCONFIG (0x10) +#define OMAP_USBTLL_SYSCONFIG_CACTIVITY (1 << 8) +#define OMAP_USBTLL_SYSCONFIG_SIDLEMODE (1 << 3) +#define OMAP_USBTLL_SYSCONFIG_ENAWAKEUP (1 << 2) +#define OMAP_USBTLL_SYSCONFIG_SOFTRESET (1 << 1) +#define OMAP_USBTLL_SYSCONFIG_AUTOIDLE (1 << 0) + +#define OMAP_USBTLL_SYSSTATUS (0x14) +#define OMAP_USBTLL_SYSSTATUS_RESETDONE (1 << 0) + +#define OMAP_USBTLL_IRQSTATUS (0x18) +#define OMAP_USBTLL_IRQENABLE (0x1C) + +#define OMAP_TLL_SHARED_CONF (0x30) +#define OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN (1 << 6) +#define OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN (1 << 5) +#define OMAP_TLL_SHARED_CONF_USB_DIVRATION (1 << 2) +#define OMAP_TLL_SHARED_CONF_FCLK_REQ (1 << 1) +#define OMAP_TLL_SHARED_CONF_FCLK_IS_ON (1 << 0) + +#define OMAP_TLL_CHANNEL_CONF(num) (0x040 + 0x004 * num) +#define OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT 24 +#define OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF (1 << 11) +#define OMAP_TLL_CHANNEL_CONF_ULPI_ULPIAUTOIDLE (1 << 10) +#define OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE (1 << 9) +#define OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE (1 << 8) +#define OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS (1 << 1) +#define OMAP_TLL_CHANNEL_CONF_CHANEN (1 << 0) + +#define OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0 0x0 +#define OMAP_TLL_FSLSMODE_6PIN_PHY_DP_DM 0x1 +#define OMAP_TLL_FSLSMODE_3PIN_PHY 0x2 +#define OMAP_TLL_FSLSMODE_4PIN_PHY 0x3 +#define OMAP_TLL_FSLSMODE_6PIN_TLL_DAT_SE0 0x4 +#define OMAP_TLL_FSLSMODE_6PIN_TLL_DP_DM 0x5 +#define OMAP_TLL_FSLSMODE_3PIN_TLL 0x6 +#define OMAP_TLL_FSLSMODE_4PIN_TLL 0x7 +#define OMAP_TLL_FSLSMODE_2PIN_TLL_DAT_SE0 0xA +#define OMAP_TLL_FSLSMODE_2PIN_DAT_DP_DM 0xB + +#define OMAP_TLL_ULPI_FUNCTION_CTRL(num) (0x804 + 0x100 * num) +#define OMAP_TLL_ULPI_INTERFACE_CTRL(num) (0x807 + 0x100 * num) +#define OMAP_TLL_ULPI_OTG_CTRL(num) (0x80A + 0x100 * num) +#define OMAP_TLL_ULPI_INT_EN_RISE(num) (0x80D + 0x100 * num) +#define OMAP_TLL_ULPI_INT_EN_FALL(num) (0x810 + 0x100 * num) +#define OMAP_TLL_ULPI_INT_STATUS(num) (0x813 + 0x100 * num) +#define OMAP_TLL_ULPI_INT_LATCH(num) (0x814 + 0x100 * num) +#define OMAP_TLL_ULPI_DEBUG(num) (0x815 + 0x100 * num) +#define OMAP_TLL_ULPI_SCRATCH_REGISTER(num) (0x816 + 0x100 * num) + +#define OMAP_REV2_TLL_CHANNEL_COUNT 2 +#define OMAP_TLL_CHANNEL_COUNT 3 +#define OMAP_TLL_CHANNEL_1_EN_MASK (1 << 0) +#define OMAP_TLL_CHANNEL_2_EN_MASK (1 << 1) +#define OMAP_TLL_CHANNEL_3_EN_MASK (1 << 2) + +/* Values of USBTLL_REVISION - Note: these are not given in the TRM */ +#define OMAP_USBTLL_REV1 0x00000015 /* OMAP3 */ +#define OMAP_USBTLL_REV2 0x00000018 /* OMAP 3630 */ +#define OMAP_USBTLL_REV3 0x00000004 /* OMAP4 */ + +#define is_ehci_tll_mode(x) (x == OMAP_EHCI_PORT_MODE_TLL) + +struct usbtll_omap { + struct clk *usbtll_p1_fck; + struct clk *usbtll_p2_fck; + struct usbtll_omap_platform_data platdata; + /* secure the register updates */ + spinlock_t lock; +}; + +/*-------------------------------------------------------------------------*/ + +const char usbtll_driver_name[] = USBTLL_DRIVER_NAME; +struct platform_device *tll_pdev; + +/*-------------------------------------------------------------------------*/ + +static inline void usbtll_write(void __iomem *base, u32 reg, u32 val) +{ + __raw_writel(val, base + reg); +} + +static inline u32 usbtll_read(void __iomem *base, u32 reg) +{ + return __raw_readl(base + reg); +} + +static inline void usbtll_writeb(void __iomem *base, u8 reg, u8 val) +{ + __raw_writeb(val, base + reg); +} + +static inline u8 usbtll_readb(void __iomem *base, u8 reg) +{ + return __raw_readb(base + reg); +} + +/*-------------------------------------------------------------------------*/ + +static bool is_ohci_port(enum usbhs_omap_port_mode pmode) +{ + switch (pmode) { + case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM: + case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM: + case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM: + case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM: + case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM: + return true; + + default: + return false; + } +} + +/* + * convert the port-mode enum to a value we can use in the FSLSMODE + * field of USBTLL_CHANNEL_CONF + */ +static unsigned ohci_omap3_fslsmode(enum usbhs_omap_port_mode mode) +{ + switch (mode) { + case OMAP_USBHS_PORT_MODE_UNUSED: + case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: + return OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0; + + case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM: + return OMAP_TLL_FSLSMODE_6PIN_PHY_DP_DM; + + case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0: + return OMAP_TLL_FSLSMODE_3PIN_PHY; + + case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM: + return OMAP_TLL_FSLSMODE_4PIN_PHY; + + case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0: + return OMAP_TLL_FSLSMODE_6PIN_TLL_DAT_SE0; + + case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM: + return OMAP_TLL_FSLSMODE_6PIN_TLL_DP_DM; + + case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0: + return OMAP_TLL_FSLSMODE_3PIN_TLL; + + case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM: + return OMAP_TLL_FSLSMODE_4PIN_TLL; + + case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0: + return OMAP_TLL_FSLSMODE_2PIN_TLL_DAT_SE0; + + case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM: + return OMAP_TLL_FSLSMODE_2PIN_DAT_DP_DM; + default: + pr_warn("Invalid port mode, using default\n"); + return OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0; + } +} + +/** + * usbtll_omap_probe - initialize TI-based HCDs + * + * Allocates basic resources for this USB host controller. + */ +static int __devinit usbtll_omap_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct usbtll_omap_platform_data *pdata = dev->platform_data; + void __iomem *base; + struct resource *res; + struct usbtll_omap *tll; + unsigned reg; + unsigned long flags; + int ret = 0; + int i, ver, count; + + dev_dbg(dev, "starting TI HSUSB TLL Controller\n"); + + tll = kzalloc(sizeof(struct usbtll_omap), GFP_KERNEL); + if (!tll) { + dev_err(dev, "Memory allocation failed\n"); + ret = -ENOMEM; + goto end; + } + + spin_lock_init(&tll->lock); + + for (i = 0; i < OMAP3_HS_USB_PORTS; i++) + tll->platdata.port_mode[i] = pdata->port_mode[i]; + + tll->usbtll_p1_fck = clk_get(dev, "usb_tll_hs_usb_ch0_clk"); + if (IS_ERR(tll->usbtll_p1_fck)) { + ret = PTR_ERR(tll->usbtll_p1_fck); + dev_err(dev, "usbtll_p1_fck failed error:%d\n", ret); + goto err_tll; + } + + tll->usbtll_p2_fck = clk_get(dev, "usb_tll_hs_usb_ch1_clk"); + if (IS_ERR(tll->usbtll_p2_fck)) { + ret = PTR_ERR(tll->usbtll_p2_fck); + dev_err(dev, "usbtll_p2_fck failed error:%d\n", ret); + goto err_usbtll_p1_fck; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(dev, "usb tll get resource failed\n"); + ret = -ENODEV; + goto err_usbtll_p2_fck; + } + + base = ioremap(res->start, resource_size(res)); + if (!base) { + dev_err(dev, "TLL ioremap failed\n"); + ret = -ENOMEM; + goto err_usbtll_p2_fck; + } + + platform_set_drvdata(pdev, tll); + pm_runtime_enable(dev); + pm_runtime_get_sync(dev); + + spin_lock_irqsave(&tll->lock, flags); + + ver = usbtll_read(base, OMAP_USBTLL_REVISION); + switch (ver) { + case OMAP_USBTLL_REV1: + case OMAP_USBTLL_REV2: + count = OMAP_TLL_CHANNEL_COUNT; + break; + case OMAP_USBTLL_REV3: + count = OMAP_REV2_TLL_CHANNEL_COUNT; + break; + default: + dev_err(dev, "TLL version failed\n"); + ret = -ENODEV; + goto err_ioremap; + } + + if (is_ehci_tll_mode(pdata->port_mode[0]) || + is_ehci_tll_mode(pdata->port_mode[1]) || + is_ehci_tll_mode(pdata->port_mode[2]) || + is_ohci_port(pdata->port_mode[0]) || + is_ohci_port(pdata->port_mode[1]) || + is_ohci_port(pdata->port_mode[2])) { + + /* Program Common TLL register */ + reg = usbtll_read(base, OMAP_TLL_SHARED_CONF); + reg |= (OMAP_TLL_SHARED_CONF_FCLK_IS_ON + | OMAP_TLL_SHARED_CONF_USB_DIVRATION); + reg &= ~OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN; + reg &= ~OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN; + + usbtll_write(base, OMAP_TLL_SHARED_CONF, reg); + + /* Enable channels now */ + for (i = 0; i < count; i++) { + reg = usbtll_read(base, OMAP_TLL_CHANNEL_CONF(i)); + + if (is_ohci_port(pdata->port_mode[i])) { + reg |= ohci_omap3_fslsmode(pdata->port_mode[i]) + << OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT; + reg |= OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS; + } else if (pdata->port_mode[i] == + OMAP_EHCI_PORT_MODE_TLL) { + /* + * Disable AutoIdle, BitStuffing + * and use SDR Mode + */ + reg &= ~(OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE + | OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF + | OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE); + } else { + continue; + } + reg |= OMAP_TLL_CHANNEL_CONF_CHANEN; + usbtll_write(base, OMAP_TLL_CHANNEL_CONF(i), reg); + + usbtll_writeb(base, + OMAP_TLL_ULPI_SCRATCH_REGISTER(i), + 0xbe); + } + } + +err_ioremap: + spin_unlock_irqrestore(&tll->lock, flags); + iounmap(base); + pm_runtime_put_sync(dev); + tll_pdev = pdev; + if (!ret) + goto end; + pm_runtime_disable(dev); + +err_usbtll_p2_fck: + clk_put(tll->usbtll_p2_fck); + +err_usbtll_p1_fck: + clk_put(tll->usbtll_p1_fck); + +err_tll: + kfree(tll); + +end: + return ret; +} + +/** + * usbtll_omap_remove - shutdown processing for UHH & TLL HCDs + * @pdev: USB Host Controller being removed + * + * Reverses the effect of usbtll_omap_probe(). + */ +static int __devexit usbtll_omap_remove(struct platform_device *pdev) +{ + struct usbtll_omap *tll = platform_get_drvdata(pdev); + + clk_put(tll->usbtll_p2_fck); + clk_put(tll->usbtll_p1_fck); + pm_runtime_disable(&pdev->dev); + kfree(tll); + return 0; +} + +static int usbtll_runtime_resume(struct device *dev) +{ + struct usbtll_omap *tll = dev_get_drvdata(dev); + struct usbtll_omap_platform_data *pdata = &tll->platdata; + unsigned long flags; + + dev_dbg(dev, "usbtll_runtime_resume\n"); + + if (!pdata) { + dev_dbg(dev, "missing platform_data\n"); + return -ENODEV; + } + + spin_lock_irqsave(&tll->lock, flags); + + if (is_ehci_tll_mode(pdata->port_mode[0])) + clk_enable(tll->usbtll_p1_fck); + + if (is_ehci_tll_mode(pdata->port_mode[1])) + clk_enable(tll->usbtll_p2_fck); + + spin_unlock_irqrestore(&tll->lock, flags); + + return 0; +} + +static int usbtll_runtime_suspend(struct device *dev) +{ + struct usbtll_omap *tll = dev_get_drvdata(dev); + struct usbtll_omap_platform_data *pdata = &tll->platdata; + unsigned long flags; + + dev_dbg(dev, "usbtll_runtime_suspend\n"); + + if (!pdata) { + dev_dbg(dev, "missing platform_data\n"); + return -ENODEV; + } + + spin_lock_irqsave(&tll->lock, flags); + + if (is_ehci_tll_mode(pdata->port_mode[0])) + clk_disable(tll->usbtll_p1_fck); + + if (is_ehci_tll_mode(pdata->port_mode[1])) + clk_disable(tll->usbtll_p2_fck); + + spin_unlock_irqrestore(&tll->lock, flags); + + return 0; +} + +static const struct dev_pm_ops usbtllomap_dev_pm_ops = { + SET_RUNTIME_PM_OPS(usbtll_runtime_suspend, + usbtll_runtime_resume, + NULL) +}; + +static struct platform_driver usbtll_omap_driver = { + .driver = { + .name = (char *)usbtll_driver_name, + .owner = THIS_MODULE, + .pm = &usbtllomap_dev_pm_ops, + }, + .probe = usbtll_omap_probe, + .remove = __devexit_p(usbtll_omap_remove), +}; + +int omap_tll_enable(void) +{ + if (!tll_pdev) { + pr_err("missing omap usbhs tll platform_data\n"); + return -ENODEV; + } + return pm_runtime_get_sync(&tll_pdev->dev); +} +EXPORT_SYMBOL_GPL(omap_tll_enable); + +int omap_tll_disable(void) +{ + if (!tll_pdev) { + pr_err("missing omap usbhs tll platform_data\n"); + return -ENODEV; + } + return pm_runtime_put_sync(&tll_pdev->dev); +} +EXPORT_SYMBOL_GPL(omap_tll_disable); + +MODULE_AUTHOR("Keshava Munegowda <keshava_mgowda@ti.com>"); +MODULE_ALIAS("platform:" USBHS_DRIVER_NAME); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("usb tll driver for TI OMAP EHCI and OHCI controllers"); + +static int __init omap_usbtll_drvinit(void) +{ + return platform_driver_register(&usbtll_omap_driver); +} + +/* + * init before usbhs core driver; + * The usbtll driver should be initialized before + * the usbhs core driver probe function is called. + */ +fs_initcall(omap_usbtll_drvinit); + +static void __exit omap_usbtll_drvexit(void) +{ + platform_driver_unregister(&usbtll_omap_driver); +} +module_exit(omap_usbtll_drvexit); |