diff options
Diffstat (limited to 'drivers/mmc/core/block.c')
-rw-r--r-- | drivers/mmc/core/block.c | 1385 |
1 files changed, 779 insertions, 606 deletions
diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c index ccfa98af1dd3..20135a5de748 100644 --- a/drivers/mmc/core/block.c +++ b/drivers/mmc/core/block.c @@ -63,7 +63,13 @@ MODULE_ALIAS("mmc:block"); #endif #define MODULE_PARAM_PREFIX "mmcblk." -#define MMC_BLK_TIMEOUT_MS (10 * 60 * 1000) /* 10 minute timeout */ +/* + * Set a 10 second timeout for polling write request busy state. Note, mmc core + * is setting a 3 second timeout for SD cards, and SDHCI has long had a 10 + * second software timer to timeout the whole request, so 10 seconds should be + * ample. + */ +#define MMC_BLK_TIMEOUT_MS (10 * 1000) #define MMC_SANITIZE_REQ_TIMEOUT 240000 #define MMC_EXTRACT_INDEX_FROM_ARG(x) ((x & 0x00FF0000) >> 16) @@ -112,6 +118,7 @@ struct mmc_blk_data { #define MMC_BLK_WRITE BIT(1) #define MMC_BLK_DISCARD BIT(2) #define MMC_BLK_SECDISCARD BIT(3) +#define MMC_BLK_CQE_RECOVERY BIT(4) /* * Only set in main mmc_blk_data associated @@ -189,7 +196,7 @@ static void mmc_blk_put(struct mmc_blk_data *md) md->usage--; if (md->usage == 0) { int devidx = mmc_get_devidx(md->disk); - blk_cleanup_queue(md->queue.queue); + blk_put_queue(md->queue.queue); ida_simple_remove(&mmc_blk_ida, devidx); put_disk(md->disk); kfree(md); @@ -921,14 +928,54 @@ static int mmc_sd_num_wr_blocks(struct mmc_card *card, u32 *written_blocks) return 0; } +static unsigned int mmc_blk_clock_khz(struct mmc_host *host) +{ + if (host->actual_clock) + return host->actual_clock / 1000; + + /* Clock may be subject to a divisor, fudge it by a factor of 2. */ + if (host->ios.clock) + return host->ios.clock / 2000; + + /* How can there be no clock */ + WARN_ON_ONCE(1); + return 100; /* 100 kHz is minimum possible value */ +} + +static unsigned int mmc_blk_data_timeout_ms(struct mmc_host *host, + struct mmc_data *data) +{ + unsigned int ms = DIV_ROUND_UP(data->timeout_ns, 1000000); + unsigned int khz; + + if (data->timeout_clks) { + khz = mmc_blk_clock_khz(host); + ms += DIV_ROUND_UP(data->timeout_clks, khz); + } + + return ms; +} + +static inline bool mmc_blk_in_tran_state(u32 status) +{ + /* + * Some cards mishandle the status bits, so make sure to check both the + * busy indication and the card state. + */ + return status & R1_READY_FOR_DATA && + (R1_CURRENT_STATE(status) == R1_STATE_TRAN); +} + static int card_busy_detect(struct mmc_card *card, unsigned int timeout_ms, - bool hw_busy_detect, struct request *req, bool *gen_err) + struct request *req, u32 *resp_errs) { unsigned long timeout = jiffies + msecs_to_jiffies(timeout_ms); int err = 0; u32 status; do { + bool done = time_after(jiffies, timeout); + err = __mmc_send_status(card, &status, 5); if (err) { pr_err("%s: error %d requesting status\n", @@ -936,25 +983,18 @@ static int card_busy_detect(struct mmc_card *card, unsigned int timeout_ms, return err; } - if (status & R1_ERROR) { - pr_err("%s: %s: error sending status cmd, status %#x\n", - req->rq_disk->disk_name, __func__, status); - *gen_err = true; - } - - /* We may rely on the host hw to handle busy detection.*/ - if ((card->host->caps & MMC_CAP_WAIT_WHILE_BUSY) && - hw_busy_detect) - break; + /* Accumulate any response error bits seen */ + if (resp_errs) + *resp_errs |= status; /* * Timeout if the device never becomes ready for data and never * leaves the program state. */ - if (time_after(jiffies, timeout)) { - pr_err("%s: Card stuck in programming state! %s %s\n", + if (done) { + pr_err("%s: Card stuck in wrong state! %s %s status: %#x\n", mmc_hostname(card->host), - req->rq_disk->disk_name, __func__); + req->rq_disk->disk_name, __func__, status); return -ETIMEDOUT; } @@ -963,229 +1003,11 @@ static int card_busy_detect(struct mmc_card *card, unsigned int timeout_ms, * so make sure to check both the busy * indication and the card state. */ - } while (!(status & R1_READY_FOR_DATA) || - (R1_CURRENT_STATE(status) == R1_STATE_PRG)); + } while (!mmc_blk_in_tran_state(status)); return err; } -static int send_stop(struct mmc_card *card, unsigned int timeout_ms, - struct request *req, bool *gen_err, u32 *stop_status) -{ - struct mmc_host *host = card->host; - struct mmc_command cmd = {}; - int err; - bool use_r1b_resp = rq_data_dir(req) == WRITE; - - /* - * Normally we use R1B responses for WRITE, but in cases where the host - * has specified a max_busy_timeout we need to validate it. A failure - * means we need to prevent the host from doing hw busy detection, which - * is done by converting to a R1 response instead. - */ - if (host->max_busy_timeout && (timeout_ms > host->max_busy_timeout)) - use_r1b_resp = false; - - cmd.opcode = MMC_STOP_TRANSMISSION; - if (use_r1b_resp) { - cmd.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC; - cmd.busy_timeout = timeout_ms; - } else { - cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC; - } - - err = mmc_wait_for_cmd(host, &cmd, 5); - if (err) - return err; - - *stop_status = cmd.resp[0]; - - /* No need to check card status in case of READ. */ - if (rq_data_dir(req) == READ) - return 0; - - if (!mmc_host_is_spi(host) && - (*stop_status & R1_ERROR)) { - pr_err("%s: %s: general error sending stop command, resp %#x\n", - req->rq_disk->disk_name, __func__, *stop_status); - *gen_err = true; - } - - return card_busy_detect(card, timeout_ms, use_r1b_resp, req, gen_err); -} - -#define ERR_NOMEDIUM 3 -#define ERR_RETRY 2 -#define ERR_ABORT 1 -#define ERR_CONTINUE 0 - -static int mmc_blk_cmd_error(struct request *req, const char *name, int error, - bool status_valid, u32 status) -{ - switch (error) { - case -EILSEQ: - /* response crc error, retry the r/w cmd */ - pr_err("%s: %s sending %s command, card status %#x\n", - req->rq_disk->disk_name, "response CRC error", - name, status); - return ERR_RETRY; - - case -ETIMEDOUT: - pr_err("%s: %s sending %s command, card status %#x\n", - req->rq_disk->disk_name, "timed out", name, status); - - /* If the status cmd initially failed, retry the r/w cmd */ - if (!status_valid) { - pr_err("%s: status not valid, retrying timeout\n", - req->rq_disk->disk_name); - return ERR_RETRY; - } - - /* - * If it was a r/w cmd crc error, or illegal command - * (eg, issued in wrong state) then retry - we should - * have corrected the state problem above. - */ - if (status & (R1_COM_CRC_ERROR | R1_ILLEGAL_COMMAND)) { - pr_err("%s: command error, retrying timeout\n", - req->rq_disk->disk_name); - return ERR_RETRY; - } - - /* Otherwise abort the command */ - return ERR_ABORT; - - default: - /* We don't understand the error code the driver gave us */ - pr_err("%s: unknown error %d sending read/write command, card status %#x\n", - req->rq_disk->disk_name, error, status); - return ERR_ABORT; - } -} - -/* - * Initial r/w and stop cmd error recovery. - * We don't know whether the card received the r/w cmd or not, so try to - * restore things back to a sane state. Essentially, we do this as follows: - * - Obtain card status. If the first attempt to obtain card status fails, - * the status word will reflect the failed status cmd, not the failed - * r/w cmd. If we fail to obtain card status, it suggests we can no - * longer communicate with the card. - * - Check the card state. If the card received the cmd but there was a - * transient problem with the response, it might still be in a data transfer - * mode. Try to send it a stop command. If this fails, we can't recover. - * - If the r/w cmd failed due to a response CRC error, it was probably - * transient, so retry the cmd. - * - If the r/w cmd timed out, but we didn't get the r/w cmd status, retry. - * - If the r/w cmd timed out, and the r/w cmd failed due to CRC error or - * illegal cmd, retry. - * Otherwise we don't understand what happened, so abort. - */ -static int mmc_blk_cmd_recovery(struct mmc_card *card, struct request *req, - struct mmc_blk_request *brq, bool *ecc_err, bool *gen_err) -{ - bool prev_cmd_status_valid = true; - u32 status, stop_status = 0; - int err, retry; - - if (mmc_card_removed(card)) - return ERR_NOMEDIUM; - - /* - * Try to get card status which indicates both the card state - * and why there was no response. If the first attempt fails, - * we can't be sure the returned status is for the r/w command. - */ - for (retry = 2; retry >= 0; retry--) { - err = __mmc_send_status(card, &status, 0); - if (!err) - break; - - /* Re-tune if needed */ - mmc_retune_recheck(card->host); - - prev_cmd_status_valid = false; - pr_err("%s: error %d sending status command, %sing\n", - req->rq_disk->disk_name, err, retry ? "retry" : "abort"); - } - - /* We couldn't get a response from the card. Give up. */ - if (err) { - /* Check if the card is removed */ - if (mmc_detect_card_removed(card->host)) - return ERR_NOMEDIUM; - return ERR_ABORT; - } - - /* Flag ECC errors */ - if ((status & R1_CARD_ECC_FAILED) || - (brq->stop.resp[0] & R1_CARD_ECC_FAILED) || - (brq->cmd.resp[0] & R1_CARD_ECC_FAILED)) - *ecc_err = true; - - /* Flag General errors */ - if (!mmc_host_is_spi(card->host) && rq_data_dir(req) != READ) - if ((status & R1_ERROR) || - (brq->stop.resp[0] & R1_ERROR)) { - pr_err("%s: %s: general error sending stop or status command, stop cmd response %#x, card status %#x\n", - req->rq_disk->disk_name, __func__, - brq->stop.resp[0], status); - *gen_err = true; - } - - /* - * Check the current card state. If it is in some data transfer - * mode, tell it to stop (and hopefully transition back to TRAN.) - */ - if (R1_CURRENT_STATE(status) == R1_STATE_DATA || - R1_CURRENT_STATE(status) == R1_STATE_RCV) { - err = send_stop(card, - DIV_ROUND_UP(brq->data.timeout_ns, 1000000), - req, gen_err, &stop_status); - if (err) { - pr_err("%s: error %d sending stop command\n", - req->rq_disk->disk_name, err); - /* - * If the stop cmd also timed out, the card is probably - * not present, so abort. Other errors are bad news too. - */ - return ERR_ABORT; - } - - if (stop_status & R1_CARD_ECC_FAILED) - *ecc_err = true; - } - - /* Check for set block count errors */ - if (brq->sbc.error) - return mmc_blk_cmd_error(req, "SET_BLOCK_COUNT", brq->sbc.error, - prev_cmd_status_valid, status); - - /* Check for r/w command errors */ - if (brq->cmd.error) - return mmc_blk_cmd_error(req, "r/w cmd", brq->cmd.error, - prev_cmd_status_valid, status); - - /* Data errors */ - if (!brq->stop.error) - return ERR_CONTINUE; - - /* Now for stop errors. These aren't fatal to the transfer. */ - pr_info("%s: error %d sending stop command, original cmd response %#x, card status %#x\n", - req->rq_disk->disk_name, brq->stop.error, - brq->cmd.resp[0], status); - - /* - * Subsitute in our own stop status as this will give the error - * state which happened during the execution of the r/w command. - */ - if (stop_status) { - brq->stop.resp[0] = stop_status; - brq->stop.error = 0; - } - return ERR_CONTINUE; -} - static int mmc_blk_reset(struct mmc_blk_data *md, struct mmc_host *host, int type) { @@ -1281,7 +1103,7 @@ static void mmc_blk_issue_drv_op(struct mmc_queue *mq, struct request *req) break; } mq_rq->drv_op_result = ret; - blk_end_request_all(req, ret ? BLK_STS_IOERR : BLK_STS_OK); + blk_mq_end_request(req, ret ? BLK_STS_IOERR : BLK_STS_OK); } static void mmc_blk_issue_discard_rq(struct mmc_queue *mq, struct request *req) @@ -1324,7 +1146,7 @@ static void mmc_blk_issue_discard_rq(struct mmc_queue *mq, struct request *req) else mmc_blk_reset_success(md, type); fail: - blk_end_request(req, status, blk_rq_bytes(req)); + blk_mq_end_request(req, status); } static void mmc_blk_issue_secdiscard_rq(struct mmc_queue *mq, @@ -1394,7 +1216,7 @@ out_retry: if (!err) mmc_blk_reset_success(md, type); out: - blk_end_request(req, status, blk_rq_bytes(req)); + blk_mq_end_request(req, status); } static void mmc_blk_issue_flush(struct mmc_queue *mq, struct request *req) @@ -1404,7 +1226,7 @@ static void mmc_blk_issue_flush(struct mmc_queue *mq, struct request *req) int ret = 0; ret = mmc_flush_cache(card); - blk_end_request_all(req, ret ? BLK_STS_IOERR : BLK_STS_OK); + blk_mq_end_request(req, ret ? BLK_STS_IOERR : BLK_STS_OK); } /* @@ -1430,15 +1252,18 @@ static inline void mmc_apply_rel_rw(struct mmc_blk_request *brq, } } -#define CMD_ERRORS \ - (R1_OUT_OF_RANGE | /* Command argument out of range */ \ - R1_ADDRESS_ERROR | /* Misaligned address */ \ +#define CMD_ERRORS_EXCL_OOR \ + (R1_ADDRESS_ERROR | /* Misaligned address */ \ R1_BLOCK_LEN_ERROR | /* Transferred block length incorrect */\ R1_WP_VIOLATION | /* Tried to write to protected block */ \ R1_CARD_ECC_FAILED | /* Card ECC failed */ \ R1_CC_ERROR | /* Card controller error */ \ R1_ERROR) /* General/unknown error */ +#define CMD_ERRORS \ + (CMD_ERRORS_EXCL_OOR | \ + R1_OUT_OF_RANGE) /* Command argument out of range */ \ + static void mmc_blk_eval_resp_error(struct mmc_blk_request *brq) { u32 val; @@ -1481,116 +1306,6 @@ static void mmc_blk_eval_resp_error(struct mmc_blk_request *brq) } } -static enum mmc_blk_status mmc_blk_err_check(struct mmc_card *card, - struct mmc_async_req *areq) -{ - struct mmc_queue_req *mq_mrq = container_of(areq, struct mmc_queue_req, - areq); - struct mmc_blk_request *brq = &mq_mrq->brq; - struct request *req = mmc_queue_req_to_req(mq_mrq); - int need_retune = card->host->need_retune; - bool ecc_err = false; - bool gen_err = false; - - /* - * sbc.error indicates a problem with the set block count - * command. No data will have been transferred. - * - * cmd.error indicates a problem with the r/w command. No - * data will have been transferred. - * - * stop.error indicates a problem with the stop command. Data - * may have been transferred, or may still be transferring. - */ - - mmc_blk_eval_resp_error(brq); - - if (brq->sbc.error || brq->cmd.error || - brq->stop.error || brq->data.error) { - switch (mmc_blk_cmd_recovery(card, req, brq, &ecc_err, &gen_err)) { - case ERR_RETRY: - return MMC_BLK_RETRY; - case ERR_ABORT: - return MMC_BLK_ABORT; - case ERR_NOMEDIUM: - return MMC_BLK_NOMEDIUM; - case ERR_CONTINUE: - break; - } - } - - /* - * Check for errors relating to the execution of the - * initial command - such as address errors. No data - * has been transferred. - */ - if (brq->cmd.resp[0] & CMD_ERRORS) { - pr_err("%s: r/w command failed, status = %#x\n", - req->rq_disk->disk_name, brq->cmd.resp[0]); - return MMC_BLK_ABORT; - } - - /* - * Everything else is either success, or a data error of some - * kind. If it was a write, we may have transitioned to - * program mode, which we have to wait for it to complete. - */ - if (!mmc_host_is_spi(card->host) && rq_data_dir(req) != READ) { - int err; - - /* Check stop command response */ - if (brq->stop.resp[0] & R1_ERROR) { - pr_err("%s: %s: general error sending stop command, stop cmd response %#x\n", - req->rq_disk->disk_name, __func__, - brq->stop.resp[0]); - gen_err = true; - } - - err = card_busy_detect(card, MMC_BLK_TIMEOUT_MS, false, req, - &gen_err); - if (err) - return MMC_BLK_CMD_ERR; - } - - /* if general error occurs, retry the write operation. */ - if (gen_err) { - pr_warn("%s: retrying write for general error\n", - req->rq_disk->disk_name); - return MMC_BLK_RETRY; - } - - /* Some errors (ECC) are flagged on the next commmand, so check stop, too */ - if (brq->data.error || brq->stop.error) { - if (need_retune && !brq->retune_retry_done) { - pr_debug("%s: retrying because a re-tune was needed\n", - req->rq_disk->disk_name); - brq->retune_retry_done = 1; - return MMC_BLK_RETRY; - } - pr_err("%s: error %d transferring data, sector %u, nr %u, cmd response %#x, card status %#x\n", - req->rq_disk->disk_name, brq->data.error ?: brq->stop.error, - (unsigned)blk_rq_pos(req), - (unsigned)blk_rq_sectors(req), - brq->cmd.resp[0], brq->stop.resp[0]); - - if (rq_data_dir(req) == READ) { - if (ecc_err) - return MMC_BLK_ECC_ERR; - return MMC_BLK_DATA_ERR; - } else { - return MMC_BLK_CMD_ERR; - } - } - - if (!brq->data.bytes_xfered) - return MMC_BLK_RETRY; - - if (blk_rq_bytes(req) != brq->data.bytes_xfered) - return MMC_BLK_PARTIAL; - - return MMC_BLK_SUCCESS; -} - static void mmc_blk_data_prep(struct mmc_queue *mq, struct mmc_queue_req *mqrq, int disable_multi, bool *do_rel_wr_p, bool *do_data_tag_p) @@ -1706,8 +1421,6 @@ static void mmc_blk_data_prep(struct mmc_queue *mq, struct mmc_queue_req *mqrq, brq->data.sg_len = i; } - mqrq->areq.mrq = &brq->mrq; - if (do_rel_wr_p) *do_rel_wr_p = do_rel_wr; @@ -1715,6 +1428,138 @@ static void mmc_blk_data_prep(struct mmc_queue *mq, struct mmc_queue_req *mqrq, *do_data_tag_p = do_data_tag; } +#define MMC_CQE_RETRIES 2 + +static void mmc_blk_cqe_complete_rq(struct mmc_queue *mq, struct request *req) +{ + struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); + struct mmc_request *mrq = &mqrq->brq.mrq; + struct request_queue *q = req->q; + struct mmc_host *host = mq->card->host; + unsigned long flags; + bool put_card; + int err; + + mmc_cqe_post_req(host, mrq); + + if (mrq->cmd && mrq->cmd->error) + err = mrq->cmd->error; + else if (mrq->data && mrq->data->error) + err = mrq->data->error; + else + err = 0; + + if (err) { + if (mqrq->retries++ < MMC_CQE_RETRIES) + blk_mq_requeue_request(req, true); + else + blk_mq_end_request(req, BLK_STS_IOERR); + } else if (mrq->data) { + if (blk_update_request(req, BLK_STS_OK, mrq->data->bytes_xfered)) + blk_mq_requeue_request(req, true); + else + __blk_mq_end_request(req, BLK_STS_OK); + } else { + blk_mq_end_request(req, BLK_STS_OK); + } + + spin_lock_irqsave(q->queue_lock, flags); + + mq->in_flight[mmc_issue_type(mq, req)] -= 1; + + put_card = (mmc_tot_in_flight(mq) == 0); + + mmc_cqe_check_busy(mq); + + spin_unlock_irqrestore(q->queue_lock, flags); + + if (!mq->cqe_busy) + blk_mq_run_hw_queues(q, true); + + if (put_card) + mmc_put_card(mq->card, &mq->ctx); +} + +void mmc_blk_cqe_recovery(struct mmc_queue *mq) +{ + struct mmc_card *card = mq->card; + struct mmc_host *host = card->host; + int err; + + pr_debug("%s: CQE recovery start\n", mmc_hostname(host)); + + err = mmc_cqe_recovery(host); + if (err) + mmc_blk_reset(mq->blkdata, host, MMC_BLK_CQE_RECOVERY); + else + mmc_blk_reset_success(mq->blkdata, MMC_BLK_CQE_RECOVERY); + + pr_debug("%s: CQE recovery done\n", mmc_hostname(host)); +} + +static void mmc_blk_cqe_req_done(struct mmc_request *mrq) +{ + struct mmc_queue_req *mqrq = container_of(mrq, struct mmc_queue_req, + brq.mrq); + struct request *req = mmc_queue_req_to_req(mqrq); + struct request_queue *q = req->q; + struct mmc_queue *mq = q->queuedata; + + /* + * Block layer timeouts race with completions which means the normal + * completion path cannot be used during recovery. + */ + if (mq->in_recovery) + mmc_blk_cqe_complete_rq(mq, req); + else + blk_mq_complete_request(req); +} + +static int mmc_blk_cqe_start_req(struct mmc_host *host, struct mmc_request *mrq) +{ + mrq->done = mmc_blk_cqe_req_done; + mrq->recovery_notifier = mmc_cqe_recovery_notifier; + + return mmc_cqe_start_req(host, mrq); +} + +static struct mmc_request *mmc_blk_cqe_prep_dcmd(struct mmc_queue_req *mqrq, + struct request *req) +{ + struct mmc_blk_request *brq = &mqrq->brq; + + memset(brq, 0, sizeof(*brq)); + + brq->mrq.cmd = &brq->cmd; + brq->mrq.tag = req->tag; + + return &brq->mrq; +} + +static int mmc_blk_cqe_issue_flush(struct mmc_queue *mq, struct request *req) +{ + struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); + struct mmc_request *mrq = mmc_blk_cqe_prep_dcmd(mqrq, req); + + mrq->cmd->opcode = MMC_SWITCH; + mrq->cmd->arg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) | + (EXT_CSD_FLUSH_CACHE << 16) | + (1 << 8) | + EXT_CSD_CMD_SET_NORMAL; + mrq->cmd->flags = MMC_CMD_AC | MMC_RSP_R1B; + + return mmc_blk_cqe_start_req(mq->card->host, mrq); +} + +static int mmc_blk_cqe_issue_rw_rq(struct mmc_queue *mq, struct request *req) +{ + struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); + + mmc_blk_data_prep(mq, mqrq, 0, NULL, NULL); + + return mmc_blk_cqe_start_req(mq->card->host, &mqrq->brq.mrq); +} + static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq, struct mmc_card *card, int disable_multi, @@ -1779,318 +1624,637 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq, brq->sbc.flags = MMC_RSP_R1 | MMC_CMD_AC; brq->mrq.sbc = &brq->sbc; } +} + +#define MMC_MAX_RETRIES 5 +#define MMC_DATA_RETRIES 2 +#define MMC_NO_RETRIES (MMC_MAX_RETRIES + 1) - mqrq->areq.err_check = mmc_blk_err_check; +static int mmc_blk_send_stop(struct mmc_card *card, unsigned int timeout) +{ + struct mmc_command cmd = { + .opcode = MMC_STOP_TRANSMISSION, + .flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC, + /* Some hosts wait for busy anyway, so provide a busy timeout */ + .busy_timeout = timeout, + }; + + return mmc_wait_for_cmd(card->host, &cmd, 5); } -static bool mmc_blk_rw_cmd_err(struct mmc_blk_data *md, struct mmc_card *card, - struct mmc_blk_request *brq, struct request *req, - bool old_req_pending) +static int mmc_blk_fix_state(struct mmc_card *card, struct request *req) { - bool req_pending; + struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); + struct mmc_blk_request *brq = &mqrq->brq; + unsigned int timeout = mmc_blk_data_timeout_ms(card->host, &brq->data); + int err; - /* - * If this is an SD card and we're writing, we can first - * mark the known good sectors as ok. - * - * If the card is not SD, we can still ok written sectors - * as reported by the controller (which might be less than - * the real number of written sectors, but never more). - */ - if (mmc_card_sd(card)) { - u32 blocks; + mmc_retune_hold_now(card->host); + + mmc_blk_send_stop(card, timeout); + + err = card_busy_detect(card, timeout, req, NULL); + + mmc_retune_release(card->host); + + return err; +} + +#define MMC_READ_SINGLE_RETRIES 2 + +/* Single sector read during recovery */ +static void mmc_blk_read_single(struct mmc_queue *mq, struct request *req) +{ + struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); + struct mmc_request *mrq = &mqrq->brq.mrq; + struct mmc_card *card = mq->card; + struct mmc_host *host = card->host; + blk_status_t error = BLK_STS_OK; + int retries = 0; + + do { + u32 status; int err; - err = mmc_sd_num_wr_blocks(card, &blocks); + mmc_blk_rw_rq_prep(mqrq, card, 1, mq); + + mmc_wait_for_req(host, mrq); + + err = mmc_send_status(card, &status); if (err) - req_pending = old_req_pending; + goto error_exit; + + if (!mmc_host_is_spi(host) && + !mmc_blk_in_tran_state(status)) { + err = mmc_blk_fix_state(card, req); + if (err) + goto error_exit; + } + + if (mrq->cmd->error && retries++ < MMC_READ_SINGLE_RETRIES) + continue; + + retries = 0; + + if (mrq->cmd->error || + mrq->data->error || + (!mmc_host_is_spi(host) && + (mrq->cmd->resp[0] & CMD_ERRORS || status & CMD_ERRORS))) + error = BLK_STS_IOERR; else - req_pending = blk_end_request(req, BLK_STS_OK, blocks << 9); - } else { - req_pending = blk_end_request(req, BLK_STS_OK, brq->data.bytes_xfered); - } - return req_pending; + error = BLK_STS_OK; + + } while (blk_update_request(req, error, 512)); + + return; + +error_exit: + mrq->data->bytes_xfered = 0; + blk_update_request(req, BLK_STS_IOERR, 512); + /* Let it try the remaining request again */ + if (mqrq->retries > MMC_MAX_RETRIES - 1) + mqrq->retries = MMC_MAX_RETRIES - 1; } -static void mmc_blk_rw_cmd_abort(struct mmc_queue *mq, struct mmc_card *card, - struct request *req, - struct mmc_queue_req *mqrq) +static inline bool mmc_blk_oor_valid(struct mmc_blk_request *brq) { - if (mmc_card_removed(card)) - req->rq_flags |= RQF_QUIET; - while (blk_end_request(req, BLK_STS_IOERR, blk_rq_cur_bytes(req))); - mq->qcnt--; + return !!brq->mrq.sbc; } -/** - * mmc_blk_rw_try_restart() - tries to restart the current async request - * @mq: the queue with the card and host to restart - * @req: a new request that want to be started after the current one +static inline u32 mmc_blk_stop_err_bits(struct mmc_blk_request *brq) +{ + return mmc_blk_oor_valid(brq) ? CMD_ERRORS : CMD_ERRORS_EXCL_OOR; +} + +/* + * Check for errors the host controller driver might not have seen such as + * response mode errors or invalid card state. + */ +static bool mmc_blk_status_error(struct request *req, u32 status) +{ + struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); + struct mmc_blk_request *brq = &mqrq->brq; + struct mmc_queue *mq = req->q->queuedata; + u32 stop_err_bits; + + if (mmc_host_is_spi(mq->card->host)) + return false; + + stop_err_bits = mmc_blk_stop_err_bits(brq); + + return brq->cmd.resp[0] & CMD_ERRORS || + brq->stop.resp[0] & stop_err_bits || + status & stop_err_bits || + (rq_data_dir(req) == WRITE && !mmc_blk_in_tran_state(status)); +} + +static inline bool mmc_blk_cmd_started(struct mmc_blk_request *brq) +{ + return !brq->sbc.error && !brq->cmd.error && + !(brq->cmd.resp[0] & CMD_ERRORS); +} + +/* + * Requests are completed by mmc_blk_mq_complete_rq() which sets simple + * policy: + * 1. A request that has transferred at least some data is considered + * successful and will be requeued if there is remaining data to + * transfer. + * 2. Otherwise the number of retries is incremented and the request + * will be requeued if there are remaining retries. + * 3. Otherwise the request will be errored out. + * That means mmc_blk_mq_complete_rq() is controlled by bytes_xfered and + * mqrq->retries. So there are only 4 possible actions here: + * 1. do not accept the bytes_xfered value i.e. set it to zero + * 2. change mqrq->retries to determine the number of retries + * 3. try to reset the card + * 4. read one sector at a time */ -static void mmc_blk_rw_try_restart(struct mmc_queue *mq, struct request *req, - struct mmc_queue_req *mqrq) +static void mmc_blk_mq_rw_recovery(struct mmc_queue *mq, struct request *req) { - if (!req) + int type = rq_data_dir(req) == READ ? MMC_BLK_READ : MMC_BLK_WRITE; + struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); + struct mmc_blk_request *brq = &mqrq->brq; + struct mmc_blk_data *md = mq->blkdata; + struct mmc_card *card = mq->card; + u32 status; + u32 blocks; + int err; + + /* + * Some errors the host driver might not have seen. Set the number of + * bytes transferred to zero in that case. + */ + err = __mmc_send_status(card, &status, 0); + if (err || mmc_blk_status_error(req, status)) + brq->data.bytes_xfered = 0; + + mmc_retune_release(card->host); + + /* + * Try again to get the status. This also provides an opportunity for + * re-tuning. + */ + if (err) + err = __mmc_send_status(card, &status, 0); + + /* + * Nothing more to do after the number of bytes transferred has been + * updated and there is no card. + */ + if (err && mmc_detect_card_removed(card->host)) return; + /* Try to get back to "tran" state */ + if (!mmc_host_is_spi(mq->card->host) && + (err || !mmc_blk_in_tran_state(status))) + err = mmc_blk_fix_state(mq->card, req); + /* - * If the card was removed, just cancel everything and return. + * Special case for SD cards where the card might record the number of + * blocks written. */ - if (mmc_card_removed(mq->card)) { - req->rq_flags |= RQF_QUIET; - blk_end_request_all(req, BLK_STS_IOERR); - mq->qcnt--; /* FIXME: just set to 0? */ + if (!err && mmc_blk_cmd_started(brq) && mmc_card_sd(card) && + rq_data_dir(req) == WRITE) { + if (mmc_sd_num_wr_blocks(card, &blocks)) + brq->data.bytes_xfered = 0; + else + brq->data.bytes_xfered = blocks << 9; + } + + /* Reset if the card is in a bad state */ + if (!mmc_host_is_spi(mq->card->host) && + err && mmc_blk_reset(md, card->host, type)) { + pr_err("%s: recovery failed!\n", req->rq_disk->disk_name); + mqrq->retries = MMC_NO_RETRIES; + return; + } + + /* + * If anything was done, just return and if there is anything remaining + * on the request it will get requeued. + */ + if (brq->data.bytes_xfered) + return; + + /* Reset before last retry */ + if (mqrq->retries + 1 == MMC_MAX_RETRIES) + mmc_blk_reset(md, card->host, type); + + /* Command errors fail fast, so use all MMC_MAX_RETRIES */ + if (brq->sbc.error || brq->cmd.error) + return; + + /* Reduce the remaining retries for data errors */ + if (mqrq->retries < MMC_MAX_RETRIES - MMC_DATA_RETRIES) { + mqrq->retries = MMC_MAX_RETRIES - MMC_DATA_RETRIES; + return; + } + + /* FIXME: Missing single sector read for large sector size */ + if (!mmc_large_sector(card) && rq_data_dir(req) == READ && + brq->data.blocks > 1) { + /* Read one sector at a time */ + mmc_blk_read_single(mq, req); return; } - /* Else proceed and try to restart the current async request */ - mmc_blk_rw_rq_prep(mqrq, mq->card, 0, mq); - mmc_start_areq(mq->card->host, &mqrq->areq, NULL); } -static void mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *new_req) +static inline bool mmc_blk_rq_error(struct mmc_blk_request *brq) { - struct mmc_blk_data *md = mq->blkdata; - struct mmc_card *card = md->queue.card; - struct mmc_blk_request *brq; - int disable_multi = 0, retry = 0, type, retune_retry_done = 0; - enum mmc_blk_status status; - struct mmc_queue_req *mqrq_cur = NULL; - struct mmc_queue_req *mq_rq; - struct request *old_req; - struct mmc_async_req *new_areq; - struct mmc_async_req *old_areq; - bool req_pending = true; + mmc_blk_eval_resp_error(brq); + + return brq->sbc.error || brq->cmd.error || brq->stop.error || + brq->data.error || brq->cmd.resp[0] & CMD_ERRORS; +} + +static int mmc_blk_card_busy(struct mmc_card *card, struct request *req) +{ + struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); + u32 status = 0; + int err; + + if (mmc_host_is_spi(card->host) || rq_data_dir(req) == READ) + return 0; + + err = card_busy_detect(card, MMC_BLK_TIMEOUT_MS, req, &status); + + /* + * Do not assume data transferred correctly if there are any error bits + * set. + */ + if (status & mmc_blk_stop_err_bits(&mqrq->brq)) { + mqrq->brq.data.bytes_xfered = 0; + err = err ? err : -EIO; + } + + /* Copy the exception bit so it will be seen later on */ + if (mmc_card_mmc(card) && status & R1_EXCEPTION_EVENT) + mqrq->brq.cmd.resp[0] |= R1_EXCEPTION_EVENT; + + return err; +} - if (new_req) { - mqrq_cur = req_to_mmc_queue_req(new_req); - mq->qcnt++; +static inline void mmc_blk_rw_reset_success(struct mmc_queue *mq, + struct request *req) +{ + int type = rq_data_dir(req) == READ ? MMC_BLK_READ : MMC_BLK_WRITE; + + mmc_blk_reset_success(mq->blkdata, type); +} + +static void mmc_blk_mq_complete_rq(struct mmc_queue *mq, struct request *req) +{ + struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); + unsigned int nr_bytes = mqrq->brq.data.bytes_xfered; + + if (nr_bytes) { + if (blk_update_request(req, BLK_STS_OK, nr_bytes)) + blk_mq_requeue_request(req, true); + else + __blk_mq_end_request(req, BLK_STS_OK); + } else if (!blk_rq_bytes(req)) { + __blk_mq_end_request(req, BLK_STS_IOERR); + } else if (mqrq->retries++ < MMC_MAX_RETRIES) { + blk_mq_requeue_request(req, true); + } else { + if (mmc_card_removed(mq->card)) + req->rq_flags |= RQF_QUIET; + blk_mq_end_request(req, BLK_STS_IOERR); + } +} + +static bool mmc_blk_urgent_bkops_needed(struct mmc_queue *mq, + struct mmc_queue_req *mqrq) +{ + return mmc_card_mmc(mq->card) && !mmc_host_is_spi(mq->card->host) && + (mqrq->brq.cmd.resp[0] & R1_EXCEPTION_EVENT || + mqrq->brq.stop.resp[0] & R1_EXCEPTION_EVENT); +} + +static void mmc_blk_urgent_bkops(struct mmc_queue *mq, + struct mmc_queue_req *mqrq) +{ + if (mmc_blk_urgent_bkops_needed(mq, mqrq)) + mmc_start_bkops(mq->card, true); +} + +void mmc_blk_mq_complete(struct request *req) +{ + struct mmc_queue *mq = req->q->queuedata; + + if (mq->use_cqe) + mmc_blk_cqe_complete_rq(mq, req); + else + mmc_blk_mq_complete_rq(mq, req); +} + +static void mmc_blk_mq_poll_completion(struct mmc_queue *mq, + struct request *req) +{ + struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); + struct mmc_host *host = mq->card->host; + + if (mmc_blk_rq_error(&mqrq->brq) || + mmc_blk_card_busy(mq->card, req)) { + mmc_blk_mq_rw_recovery(mq, req); + } else { + mmc_blk_rw_reset_success(mq, req); + mmc_retune_release(host); + } + + mmc_blk_urgent_bkops(mq, mqrq); +} + +static void mmc_blk_mq_dec_in_flight(struct mmc_queue *mq, struct request *req) +{ + struct request_queue *q = req->q; + unsigned long flags; + bool put_card; + + spin_lock_irqsave(q->queue_lock, flags); + + mq->in_flight[mmc_issue_type(mq, req)] -= 1; + + put_card = (mmc_tot_in_flight(mq) == 0); + + spin_unlock_irqrestore(q->queue_lock, flags); + + if (put_card) + mmc_put_card(mq->card, &mq->ctx); +} + +static void mmc_blk_mq_post_req(struct mmc_queue *mq, struct request *req) +{ + struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); + struct mmc_request *mrq = &mqrq->brq.mrq; + struct mmc_host *host = mq->card->host; + + mmc_post_req(host, mrq, 0); + + /* + * Block layer timeouts race with completions which means the normal + * completion path cannot be used during recovery. + */ + if (mq->in_recovery) + mmc_blk_mq_complete_rq(mq, req); + else + blk_mq_complete_request(req); + + mmc_blk_mq_dec_in_flight(mq, req); +} + +void mmc_blk_mq_recovery(struct mmc_queue *mq) +{ + struct request *req = mq->recovery_req; + struct mmc_host *host = mq->card->host; + struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); + + mq->recovery_req = NULL; + mq->rw_wait = false; + + if (mmc_blk_rq_error(&mqrq->brq)) { + mmc_retune_hold_now(host); + mmc_blk_mq_rw_recovery(mq, req); } - if (!mq->qcnt) + mmc_blk_urgent_bkops(mq, mqrq); + + mmc_blk_mq_post_req(mq, req); +} + +static void mmc_blk_mq_complete_prev_req(struct mmc_queue *mq, + struct request **prev_req) +{ + if (mmc_host_done_complete(mq->card->host)) return; - do { - if (new_req) { - /* - * When 4KB native sector is enabled, only 8 blocks - * multiple read or write is allowed - */ - if (mmc_large_sector(card) && - !IS_ALIGNED(blk_rq_sectors(new_req), 8)) { - pr_err("%s: Transfer size is not 4KB sector size aligned\n", - new_req->rq_disk->disk_name); - mmc_blk_rw_cmd_abort(mq, card, new_req, mqrq_cur); - return; - } + mutex_lock(&mq->complete_lock); - mmc_blk_rw_rq_prep(mqrq_cur, card, 0, mq); - new_areq = &mqrq_cur->areq; - } else - new_areq = NULL; + if (!mq->complete_req) + goto out_unlock; - old_areq = mmc_start_areq(card->host, new_areq, &status); - if (!old_areq) { - /* - * We have just put the first request into the pipeline - * and there is nothing more to do until it is - * complete. - */ - return; - } + mmc_blk_mq_poll_completion(mq, mq->complete_req); + + if (prev_req) + *prev_req = mq->complete_req; + else + mmc_blk_mq_post_req(mq, mq->complete_req); + + mq->complete_req = NULL; + +out_unlock: + mutex_unlock(&mq->complete_lock); +} + +void mmc_blk_mq_complete_work(struct work_struct *work) +{ + struct mmc_queue *mq = container_of(work, struct mmc_queue, + complete_work); + + mmc_blk_mq_complete_prev_req(mq, NULL); +} + +static void mmc_blk_mq_req_done(struct mmc_request *mrq) +{ + struct mmc_queue_req *mqrq = container_of(mrq, struct mmc_queue_req, + brq.mrq); + struct request *req = mmc_queue_req_to_req(mqrq); + struct request_queue *q = req->q; + struct mmc_queue *mq = q->queuedata; + struct mmc_host *host = mq->card->host; + unsigned long flags; + + if (!mmc_host_done_complete(host)) { + bool waiting; /* - * An asynchronous request has been completed and we proceed - * to handle the result of it. + * We cannot complete the request in this context, so record + * that there is a request to complete, and that a following + * request does not need to wait (although it does need to + * complete complete_req first). */ - mq_rq = container_of(old_areq, struct mmc_queue_req, areq); - brq = &mq_rq->brq; - old_req = mmc_queue_req_to_req(mq_rq); - type = rq_data_dir(old_req) == READ ? MMC_BLK_READ : MMC_BLK_WRITE; - - switch (status) { - case MMC_BLK_SUCCESS: - case MMC_BLK_PARTIAL: - /* - * A block was successfully transferred. - */ - mmc_blk_reset_success(md, type); + spin_lock_irqsave(q->queue_lock, flags); + mq->complete_req = req; + mq->rw_wait = false; + waiting = mq->waiting; + spin_unlock_irqrestore(q->queue_lock, flags); - req_pending = blk_end_request(old_req, BLK_STS_OK, - brq->data.bytes_xfered); - /* - * If the blk_end_request function returns non-zero even - * though all data has been transferred and no errors - * were returned by the host controller, it's a bug. - */ - if (status == MMC_BLK_SUCCESS && req_pending) { - pr_err("%s BUG rq_tot %d d_xfer %d\n", - __func__, blk_rq_bytes(old_req), - brq->data.bytes_xfered); - mmc_blk_rw_cmd_abort(mq, card, old_req, mq_rq); - return; - } - break; - case MMC_BLK_CMD_ERR: - req_pending = mmc_blk_rw_cmd_err(md, card, brq, old_req, req_pending); - if (mmc_blk_reset(md, card->host, type)) { - if (req_pending) - mmc_blk_rw_cmd_abort(mq, card, old_req, mq_rq); - else - mq->qcnt--; - mmc_blk_rw_try_restart(mq, new_req, mqrq_cur); - return; - } - if (!req_pending) { - mq->qcnt--; - mmc_blk_rw_try_restart(mq, new_req, mqrq_cur); - return; - } - break; - case MMC_BLK_RETRY: - retune_retry_done = brq->retune_retry_done; - if (retry++ < 5) - break; - /* Fall through */ - case MMC_BLK_ABORT: - if (!mmc_blk_reset(md, card->host, type)) - break; - mmc_blk_rw_cmd_abort(mq, card, old_req, mq_rq); - mmc_blk_rw_try_restart(mq, new_req, mqrq_cur); - return; - case MMC_BLK_DATA_ERR: { - int err; - - err = mmc_blk_reset(md, card->host, type); - if (!err) - break; - if (err == -ENODEV) { - mmc_blk_rw_cmd_abort(mq, card, old_req, mq_rq); - mmc_blk_rw_try_restart(mq, new_req, mqrq_cur); - return; - } - /* Fall through */ - } - case MMC_BLK_ECC_ERR: - if (brq->data.blocks > 1) { - /* Redo read one sector at a time */ - pr_warn("%s: retrying using single block read\n", - old_req->rq_disk->disk_name); - disable_multi = 1; - break; - } - /* - * After an error, we redo I/O one sector at a - * time, so we only reach here after trying to - * read a single sector. - */ - req_pending = blk_end_request(old_req, BLK_STS_IOERR, - brq->data.blksz); - if (!req_pending) { - mq->qcnt--; - mmc_blk_rw_try_restart(mq, new_req, mqrq_cur); - return; - } - break; - case MMC_BLK_NOMEDIUM: - mmc_blk_rw_cmd_abort(mq, card, old_req, mq_rq); - mmc_blk_rw_try_restart(mq, new_req, mqrq_cur); - return; - default: - pr_err("%s: Unhandled return value (%d)", - old_req->rq_disk->disk_name, status); - mmc_blk_rw_cmd_abort(mq, card, old_req, mq_rq); - mmc_blk_rw_try_restart(mq, new_req, mqrq_cur); - return; - } + /* + * If 'waiting' then the waiting task will complete this + * request, otherwise queue a work to do it. Note that + * complete_work may still race with the dispatch of a following + * request. + */ + if (waiting) + wake_up(&mq->wait); + else + kblockd_schedule_work(&mq->complete_work); - if (req_pending) { - /* - * In case of a incomplete request - * prepare it again and resend. - */ - mmc_blk_rw_rq_prep(mq_rq, card, - disable_multi, mq); - mmc_start_areq(card->host, - &mq_rq->areq, NULL); - mq_rq->brq.retune_retry_done = retune_retry_done; - } - } while (req_pending); + return; + } + + /* Take the recovery path for errors or urgent background operations */ + if (mmc_blk_rq_error(&mqrq->brq) || + mmc_blk_urgent_bkops_needed(mq, mqrq)) { + spin_lock_irqsave(q->queue_lock, flags); + mq->recovery_needed = true; + mq->recovery_req = req; + spin_unlock_irqrestore(q->queue_lock, flags); + wake_up(&mq->wait); + schedule_work(&mq->recovery_work); + return; + } + + mmc_blk_rw_reset_success(mq, req); - mq->qcnt--; + mq->rw_wait = false; + wake_up(&mq->wait); + + mmc_blk_mq_post_req(mq, req); } -void mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) +static bool mmc_blk_rw_wait_cond(struct mmc_queue *mq, int *err) +{ + struct request_queue *q = mq->queue; + unsigned long flags; + bool done; + + /* + * Wait while there is another request in progress, but not if recovery + * is needed. Also indicate whether there is a request waiting to start. + */ + spin_lock_irqsave(q->queue_lock, flags); + if (mq->recovery_needed) { + *err = -EBUSY; + done = true; + } else { + done = !mq->rw_wait; + } + mq->waiting = !done; + spin_unlock_irqrestore(q->queue_lock, flags); + + return done; +} + +static int mmc_blk_rw_wait(struct mmc_queue *mq, struct request **prev_req) +{ + int err = 0; + + wait_event(mq->wait, mmc_blk_rw_wait_cond(mq, &err)); + + /* Always complete the previous request if there is one */ + mmc_blk_mq_complete_prev_req(mq, prev_req); + + return err; +} + +static int mmc_blk_mq_issue_rw_rq(struct mmc_queue *mq, + struct request *req) +{ + struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); + struct mmc_host *host = mq->card->host; + struct request *prev_req = NULL; + int err = 0; + + mmc_blk_rw_rq_prep(mqrq, mq->card, 0, mq); + + mqrq->brq.mrq.done = mmc_blk_mq_req_done; + + mmc_pre_req(host, &mqrq->brq.mrq); + + err = mmc_blk_rw_wait(mq, &prev_req); + if (err) + goto out_post_req; + + mq->rw_wait = true; + + err = mmc_start_request(host, &mqrq->brq.mrq); + + if (prev_req) + mmc_blk_mq_post_req(mq, prev_req); + + if (err) + mq->rw_wait = false; + + /* Release re-tuning here where there is no synchronization required */ + if (err || mmc_host_done_complete(host)) + mmc_retune_release(host); + +out_post_req: + if (err) + mmc_post_req(host, &mqrq->brq.mrq, err); + + return err; +} + +static int mmc_blk_wait_for_idle(struct mmc_queue *mq, struct mmc_host *host) +{ + if (mq->use_cqe) + return host->cqe_ops->cqe_wait_for_idle(host); + + return mmc_blk_rw_wait(mq, NULL); +} + +enum mmc_issued mmc_blk_mq_issue_rq(struct mmc_queue *mq, struct request *req) { - int ret; struct mmc_blk_data *md = mq->blkdata; struct mmc_card *card = md->queue.card; - - if (req && !mq->qcnt) - /* claim host only for the first request */ - mmc_get_card(card, NULL); + struct mmc_host *host = card->host; + int ret; ret = mmc_blk_part_switch(card, md->part_type); - if (ret) { - if (req) { - blk_end_request_all(req, BLK_STS_IOERR); - } - goto out; - } + if (ret) + return MMC_REQ_FAILED_TO_START; - if (req) { + switch (mmc_issue_type(mq, req)) { + case MMC_ISSUE_SYNC: + ret = mmc_blk_wait_for_idle(mq, host); + if (ret) + return MMC_REQ_BUSY; switch (req_op(req)) { case REQ_OP_DRV_IN: case REQ_OP_DRV_OUT: - /* - * Complete ongoing async transfer before issuing - * ioctl()s - */ - if (mq->qcnt) - mmc_blk_issue_rw_rq(mq, NULL); mmc_blk_issue_drv_op(mq, req); break; case REQ_OP_DISCARD: - /* - * Complete ongoing async transfer before issuing - * discard. - */ - if (mq->qcnt) - mmc_blk_issue_rw_rq(mq, NULL); mmc_blk_issue_discard_rq(mq, req); break; case REQ_OP_SECURE_ERASE: - /* - * Complete ongoing async transfer before issuing - * secure erase. - */ - if (mq->qcnt) - mmc_blk_issue_rw_rq(mq, NULL); mmc_blk_issue_secdiscard_rq(mq, req); break; case REQ_OP_FLUSH: - /* - * Complete ongoing async transfer before issuing - * flush. - */ - if (mq->qcnt) - mmc_blk_issue_rw_rq(mq, NULL); mmc_blk_issue_flush(mq, req); break; default: - /* Normal request, just issue it */ - mmc_blk_issue_rw_rq(mq, req); - card->host->context_info.is_waiting_last_req = false; + WARN_ON_ONCE(1); + return MMC_REQ_FAILED_TO_START; + } + return MMC_REQ_FINISHED; + case MMC_ISSUE_DCMD: + case MMC_ISSUE_ASYNC: + switch (req_op(req)) { + case REQ_OP_FLUSH: + ret = mmc_blk_cqe_issue_flush(mq, req); break; + case REQ_OP_READ: + case REQ_OP_WRITE: + if (mq->use_cqe) + ret = mmc_blk_cqe_issue_rw_rq(mq, req); + else + ret = mmc_blk_mq_issue_rw_rq(mq, req); + break; + default: + WARN_ON_ONCE(1); + ret = -EINVAL; } - } else { - /* No request, flushing the pipeline with NULL */ - mmc_blk_issue_rw_rq(mq, NULL); - card->host->context_info.is_waiting_last_req = false; + if (!ret) + return MMC_REQ_STARTED; + return ret == -EBUSY ? MMC_REQ_BUSY : MMC_REQ_FAILED_TO_START; + default: + WARN_ON_ONCE(1); + return MMC_REQ_FAILED_TO_START; } - -out: - if (!mq->qcnt) - mmc_put_card(card, NULL); } static inline int mmc_blk_readonly(struct mmc_card *card) @@ -2156,6 +2320,18 @@ static struct mmc_blk_data *mmc_blk_alloc_req(struct mmc_card *card, md->queue.blkdata = md; + /* + * Keep an extra reference to the queue so that we can shutdown the + * queue (i.e. call blk_cleanup_queue()) while there are still + * references to the 'md'. The corresponding blk_put_queue() is in + * mmc_blk_put(). + */ + if (!blk_get_queue(md->queue.queue)) { + mmc_cleanup_queue(&md->queue); + ret = -ENODEV; + goto err_putdisk; + } + md->disk->major = MMC_BLOCK_MAJOR; md->disk->first_minor = devidx * perdev_minors; md->disk->fops = &mmc_bdops; @@ -2471,10 +2647,6 @@ static void mmc_blk_remove_req(struct mmc_blk_data *md) * from being accepted. */ card = md->queue.card; - spin_lock_irq(md->queue.queue->queue_lock); - queue_flag_set(QUEUE_FLAG_BYPASS, md->queue.queue); - spin_unlock_irq(md->queue.queue->queue_lock); - blk_set_queue_dying(md->queue.queue); mmc_cleanup_queue(&md->queue); if (md->disk->flags & GENHD_FL_UP) { device_remove_file(disk_to_dev(md->disk), &md->force_ro); @@ -2623,6 +2795,7 @@ static int mmc_ext_csd_open(struct inode *inode, struct file *filp) if (n != EXT_CSD_STR_LEN) { err = -EINVAL; + kfree(ext_csd); goto out_free; } |