summaryrefslogtreecommitdiffstats
path: root/drivers/mtd
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd')
-rw-r--r--drivers/mtd/nand/Kconfig6
-rw-r--r--drivers/mtd/nand/Makefile1
-rw-r--r--drivers/mtd/nand/ppchameleonevb.c403
3 files changed, 0 insertions, 410 deletions
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index a626629a2859..e10a66572735 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -193,12 +193,6 @@ config MTD_NAND_BF5XX_BOOTROM_ECC
If unsure, say N.
-config MTD_NAND_PPCHAMELEONEVB
- tristate "NAND Flash device on PPChameleonEVB board"
- depends on PPCHAMELEONEVB && BROKEN
- help
- This enables the NAND flash driver on the PPChameleon EVB Board.
-
config MTD_NAND_S3C2410
tristate "NAND Flash support for Samsung S3C SoCs"
depends on ARCH_S3C24XX || ARCH_S3C64XX
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 115e0334be0c..ff6e72aa27a6 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -15,7 +15,6 @@ obj-$(CONFIG_MTD_NAND_DENALI_PCI) += denali_pci.o
obj-$(CONFIG_MTD_NAND_DENALI_DT) += denali_dt.o
obj-$(CONFIG_MTD_NAND_AU1550) += au1550nd.o
obj-$(CONFIG_MTD_NAND_BF5XX) += bf5xx_nand.o
-obj-$(CONFIG_MTD_NAND_PPCHAMELEONEVB) += ppchameleonevb.o
obj-$(CONFIG_MTD_NAND_S3C2410) += s3c2410.o
obj-$(CONFIG_MTD_NAND_DAVINCI) += davinci_nand.o
obj-$(CONFIG_MTD_NAND_DISKONCHIP) += diskonchip.o
diff --git a/drivers/mtd/nand/ppchameleonevb.c b/drivers/mtd/nand/ppchameleonevb.c
deleted file mode 100644
index 0ddd90e5788f..000000000000
--- a/drivers/mtd/nand/ppchameleonevb.c
+++ /dev/null
@@ -1,403 +0,0 @@
-/*
- * drivers/mtd/nand/ppchameleonevb.c
- *
- * Copyright (C) 2003 DAVE Srl (info@wawnet.biz)
- *
- * Derived from drivers/mtd/nand/edb7312.c
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Overview:
- * This is a device driver for the NAND flash devices found on the
- * PPChameleon/PPChameleonEVB system.
- * PPChameleon options (autodetected):
- * - BA model: no NAND
- * - ME model: 32MB (Samsung K9F5608U0B)
- * - HI model: 128MB (Samsung K9F1G08UOM)
- * PPChameleonEVB options:
- * - 32MB (Samsung K9F5608U0B)
- */
-
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-#include <asm/io.h>
-#include <platforms/PPChameleonEVB.h>
-
-#undef USE_READY_BUSY_PIN
-#define USE_READY_BUSY_PIN
-/* see datasheets (tR) */
-#define NAND_BIG_DELAY_US 25
-#define NAND_SMALL_DELAY_US 10
-
-/* handy sizes */
-#define SZ_4M 0x00400000
-#define NAND_SMALL_SIZE 0x02000000
-#define NAND_MTD_NAME "ppchameleon-nand"
-#define NAND_EVB_MTD_NAME "ppchameleonevb-nand"
-
-/* GPIO pins used to drive NAND chip mounted on processor module */
-#define NAND_nCE_GPIO_PIN (0x80000000 >> 1)
-#define NAND_CLE_GPIO_PIN (0x80000000 >> 2)
-#define NAND_ALE_GPIO_PIN (0x80000000 >> 3)
-#define NAND_RB_GPIO_PIN (0x80000000 >> 4)
-/* GPIO pins used to drive NAND chip mounted on EVB */
-#define NAND_EVB_nCE_GPIO_PIN (0x80000000 >> 14)
-#define NAND_EVB_CLE_GPIO_PIN (0x80000000 >> 15)
-#define NAND_EVB_ALE_GPIO_PIN (0x80000000 >> 16)
-#define NAND_EVB_RB_GPIO_PIN (0x80000000 >> 31)
-
-/*
- * MTD structure for PPChameleonEVB board
- */
-static struct mtd_info *ppchameleon_mtd = NULL;
-static struct mtd_info *ppchameleonevb_mtd = NULL;
-
-/*
- * Module stuff
- */
-static unsigned long ppchameleon_fio_pbase = CFG_NAND0_PADDR;
-static unsigned long ppchameleonevb_fio_pbase = CFG_NAND1_PADDR;
-
-#ifdef MODULE
-module_param(ppchameleon_fio_pbase, ulong, 0);
-module_param(ppchameleonevb_fio_pbase, ulong, 0);
-#else
-__setup("ppchameleon_fio_pbase=", ppchameleon_fio_pbase);
-__setup("ppchameleonevb_fio_pbase=", ppchameleonevb_fio_pbase);
-#endif
-
-/*
- * Define static partitions for flash devices
- */
-static struct mtd_partition partition_info_hi[] = {
- { .name = "PPChameleon HI Nand Flash",
- .offset = 0,
- .size = 128 * 1024 * 1024
- }
-};
-
-static struct mtd_partition partition_info_me[] = {
- { .name = "PPChameleon ME Nand Flash",
- .offset = 0,
- .size = 32 * 1024 * 1024
- }
-};
-
-static struct mtd_partition partition_info_evb[] = {
- { .name = "PPChameleonEVB Nand Flash",
- .offset = 0,
- .size = 32 * 1024 * 1024
- }
-};
-
-#define NUM_PARTITIONS 1
-
-/*
- * hardware specific access to control-lines
- */
-static void ppchameleon_hwcontrol(struct mtd_info *mtdinfo, int cmd,
- unsigned int ctrl)
-{
- struct nand_chip *chip = mtd->priv;
-
- if (ctrl & NAND_CTRL_CHANGE) {
-#error Missing headerfiles. No way to fix this. -tglx
- switch (cmd) {
- case NAND_CTL_SETCLE:
- MACRO_NAND_CTL_SETCLE((unsigned long)CFG_NAND0_PADDR);
- break;
- case NAND_CTL_CLRCLE:
- MACRO_NAND_CTL_CLRCLE((unsigned long)CFG_NAND0_PADDR);
- break;
- case NAND_CTL_SETALE:
- MACRO_NAND_CTL_SETALE((unsigned long)CFG_NAND0_PADDR);
- break;
- case NAND_CTL_CLRALE:
- MACRO_NAND_CTL_CLRALE((unsigned long)CFG_NAND0_PADDR);
- break;
- case NAND_CTL_SETNCE:
- MACRO_NAND_ENABLE_CE((unsigned long)CFG_NAND0_PADDR);
- break;
- case NAND_CTL_CLRNCE:
- MACRO_NAND_DISABLE_CE((unsigned long)CFG_NAND0_PADDR);
- break;
- }
- }
- if (cmd != NAND_CMD_NONE)
- writeb(cmd, chip->IO_ADDR_W);
-}
-
-static void ppchameleonevb_hwcontrol(struct mtd_info *mtdinfo, int cmd,
- unsigned int ctrl)
-{
- struct nand_chip *chip = mtd->priv;
-
- if (ctrl & NAND_CTRL_CHANGE) {
-#error Missing headerfiles. No way to fix this. -tglx
- switch (cmd) {
- case NAND_CTL_SETCLE:
- MACRO_NAND_CTL_SETCLE((unsigned long)CFG_NAND1_PADDR);
- break;
- case NAND_CTL_CLRCLE:
- MACRO_NAND_CTL_CLRCLE((unsigned long)CFG_NAND1_PADDR);
- break;
- case NAND_CTL_SETALE:
- MACRO_NAND_CTL_SETALE((unsigned long)CFG_NAND1_PADDR);
- break;
- case NAND_CTL_CLRALE:
- MACRO_NAND_CTL_CLRALE((unsigned long)CFG_NAND1_PADDR);
- break;
- case NAND_CTL_SETNCE:
- MACRO_NAND_ENABLE_CE((unsigned long)CFG_NAND1_PADDR);
- break;
- case NAND_CTL_CLRNCE:
- MACRO_NAND_DISABLE_CE((unsigned long)CFG_NAND1_PADDR);
- break;
- }
- }
- if (cmd != NAND_CMD_NONE)
- writeb(cmd, chip->IO_ADDR_W);
-}
-
-#ifdef USE_READY_BUSY_PIN
-/*
- * read device ready pin
- */
-static int ppchameleon_device_ready(struct mtd_info *minfo)
-{
- if (in_be32((volatile unsigned *)GPIO0_IR) & NAND_RB_GPIO_PIN)
- return 1;
- return 0;
-}
-
-static int ppchameleonevb_device_ready(struct mtd_info *minfo)
-{
- if (in_be32((volatile unsigned *)GPIO0_IR) & NAND_EVB_RB_GPIO_PIN)
- return 1;
- return 0;
-}
-#endif
-
-/*
- * Main initialization routine
- */
-static int __init ppchameleonevb_init(void)
-{
- struct nand_chip *this;
- void __iomem *ppchameleon_fio_base;
- void __iomem *ppchameleonevb_fio_base;
-
- /*********************************
- * Processor module NAND (if any) *
- *********************************/
- /* Allocate memory for MTD device structure and private data */
- ppchameleon_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
- if (!ppchameleon_mtd) {
- printk("Unable to allocate PPChameleon NAND MTD device structure.\n");
- return -ENOMEM;
- }
-
- /* map physical address */
- ppchameleon_fio_base = ioremap(ppchameleon_fio_pbase, SZ_4M);
- if (!ppchameleon_fio_base) {
- printk("ioremap PPChameleon NAND flash failed\n");
- kfree(ppchameleon_mtd);
- return -EIO;
- }
-
- /* Get pointer to private data */
- this = (struct nand_chip *)(&ppchameleon_mtd[1]);
-
- /* Initialize structures */
- memset(ppchameleon_mtd, 0, sizeof(struct mtd_info));
- memset(this, 0, sizeof(struct nand_chip));
-
- /* Link the private data with the MTD structure */
- ppchameleon_mtd->priv = this;
- ppchameleon_mtd->owner = THIS_MODULE;
-
- /* Initialize GPIOs */
- /* Pin mapping for NAND chip */
- /*
- CE GPIO_01
- CLE GPIO_02
- ALE GPIO_03
- R/B GPIO_04
- */
- /* output select */
- out_be32((volatile unsigned *)GPIO0_OSRH, in_be32((volatile unsigned *)GPIO0_OSRH) & 0xC0FFFFFF);
- /* three-state select */
- out_be32((volatile unsigned *)GPIO0_TSRH, in_be32((volatile unsigned *)GPIO0_TSRH) & 0xC0FFFFFF);
- /* enable output driver */
- out_be32((volatile unsigned *)GPIO0_TCR,
- in_be32((volatile unsigned *)GPIO0_TCR) | NAND_nCE_GPIO_PIN | NAND_CLE_GPIO_PIN | NAND_ALE_GPIO_PIN);
-#ifdef USE_READY_BUSY_PIN
- /* three-state select */
- out_be32((volatile unsigned *)GPIO0_TSRH, in_be32((volatile unsigned *)GPIO0_TSRH) & 0xFF3FFFFF);
- /* high-impedecence */
- out_be32((volatile unsigned *)GPIO0_TCR, in_be32((volatile unsigned *)GPIO0_TCR) & (~NAND_RB_GPIO_PIN));
- /* input select */
- out_be32((volatile unsigned *)GPIO0_ISR1H,
- (in_be32((volatile unsigned *)GPIO0_ISR1H) & 0xFF3FFFFF) | 0x00400000);
-#endif
-
- /* insert callbacks */
- this->IO_ADDR_R = ppchameleon_fio_base;
- this->IO_ADDR_W = ppchameleon_fio_base;
- this->cmd_ctrl = ppchameleon_hwcontrol;
-#ifdef USE_READY_BUSY_PIN
- this->dev_ready = ppchameleon_device_ready;
-#endif
- this->chip_delay = NAND_BIG_DELAY_US;
- /* ECC mode */
- this->ecc.mode = NAND_ECC_SOFT;
-
- /* Scan to find existence of the device (it could not be mounted) */
- if (nand_scan(ppchameleon_mtd, 1)) {
- iounmap((void *)ppchameleon_fio_base);
- ppchameleon_fio_base = NULL;
- kfree(ppchameleon_mtd);
- goto nand_evb_init;
- }
-#ifndef USE_READY_BUSY_PIN
- /* Adjust delay if necessary */
- if (ppchameleon_mtd->size == NAND_SMALL_SIZE)
- this->chip_delay = NAND_SMALL_DELAY_US;
-#endif
-
- ppchameleon_mtd->name = "ppchameleon-nand";
-
- /* Register the partitions */
- mtd_device_parse_register(ppchameleon_mtd, NULL, NULL,
- ppchameleon_mtd->size == NAND_SMALL_SIZE ?
- partition_info_me : partition_info_hi,
- NUM_PARTITIONS);
-
- nand_evb_init:
- /****************************
- * EVB NAND (always present) *
- ****************************/
- /* Allocate memory for MTD device structure and private data */
- ppchameleonevb_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
- if (!ppchameleonevb_mtd) {
- printk("Unable to allocate PPChameleonEVB NAND MTD device structure.\n");
- if (ppchameleon_fio_base)
- iounmap(ppchameleon_fio_base);
- return -ENOMEM;
- }
-
- /* map physical address */
- ppchameleonevb_fio_base = ioremap(ppchameleonevb_fio_pbase, SZ_4M);
- if (!ppchameleonevb_fio_base) {
- printk("ioremap PPChameleonEVB NAND flash failed\n");
- kfree(ppchameleonevb_mtd);
- if (ppchameleon_fio_base)
- iounmap(ppchameleon_fio_base);
- return -EIO;
- }
-
- /* Get pointer to private data */
- this = (struct nand_chip *)(&ppchameleonevb_mtd[1]);
-
- /* Initialize structures */
- memset(ppchameleonevb_mtd, 0, sizeof(struct mtd_info));
- memset(this, 0, sizeof(struct nand_chip));
-
- /* Link the private data with the MTD structure */
- ppchameleonevb_mtd->priv = this;
-
- /* Initialize GPIOs */
- /* Pin mapping for NAND chip */
- /*
- CE GPIO_14
- CLE GPIO_15
- ALE GPIO_16
- R/B GPIO_31
- */
- /* output select */
- out_be32((volatile unsigned *)GPIO0_OSRH, in_be32((volatile unsigned *)GPIO0_OSRH) & 0xFFFFFFF0);
- out_be32((volatile unsigned *)GPIO0_OSRL, in_be32((volatile unsigned *)GPIO0_OSRL) & 0x3FFFFFFF);
- /* three-state select */
- out_be32((volatile unsigned *)GPIO0_TSRH, in_be32((volatile unsigned *)GPIO0_TSRH) & 0xFFFFFFF0);
- out_be32((volatile unsigned *)GPIO0_TSRL, in_be32((volatile unsigned *)GPIO0_TSRL) & 0x3FFFFFFF);
- /* enable output driver */
- out_be32((volatile unsigned *)GPIO0_TCR, in_be32((volatile unsigned *)GPIO0_TCR) | NAND_EVB_nCE_GPIO_PIN |
- NAND_EVB_CLE_GPIO_PIN | NAND_EVB_ALE_GPIO_PIN);
-#ifdef USE_READY_BUSY_PIN
- /* three-state select */
- out_be32((volatile unsigned *)GPIO0_TSRL, in_be32((volatile unsigned *)GPIO0_TSRL) & 0xFFFFFFFC);
- /* high-impedecence */
- out_be32((volatile unsigned *)GPIO0_TCR, in_be32((volatile unsigned *)GPIO0_TCR) & (~NAND_EVB_RB_GPIO_PIN));
- /* input select */
- out_be32((volatile unsigned *)GPIO0_ISR1L,
- (in_be32((volatile unsigned *)GPIO0_ISR1L) & 0xFFFFFFFC) | 0x00000001);
-#endif
-
- /* insert callbacks */
- this->IO_ADDR_R = ppchameleonevb_fio_base;
- this->IO_ADDR_W = ppchameleonevb_fio_base;
- this->cmd_ctrl = ppchameleonevb_hwcontrol;
-#ifdef USE_READY_BUSY_PIN
- this->dev_ready = ppchameleonevb_device_ready;
-#endif
- this->chip_delay = NAND_SMALL_DELAY_US;
-
- /* ECC mode */
- this->ecc.mode = NAND_ECC_SOFT;
-
- /* Scan to find existence of the device */
- if (nand_scan(ppchameleonevb_mtd, 1)) {
- iounmap((void *)ppchameleonevb_fio_base);
- kfree(ppchameleonevb_mtd);
- if (ppchameleon_fio_base)
- iounmap(ppchameleon_fio_base);
- return -ENXIO;
- }
-
- ppchameleonevb_mtd->name = NAND_EVB_MTD_NAME;
-
- /* Register the partitions */
- mtd_device_parse_register(ppchameleonevb_mtd, NULL, NULL,
- ppchameleon_mtd->size == NAND_SMALL_SIZE ?
- partition_info_me : partition_info_hi,
- NUM_PARTITIONS);
-
- /* Return happy */
- return 0;
-}
-
-module_init(ppchameleonevb_init);
-
-/*
- * Clean up routine
- */
-static void __exit ppchameleonevb_cleanup(void)
-{
- struct nand_chip *this;
-
- /* Release resources, unregister device(s) */
- nand_release(ppchameleon_mtd);
- nand_release(ppchameleonevb_mtd);
-
- /* Release iomaps */
- this = (struct nand_chip *) &ppchameleon_mtd[1];
- iounmap((void *) this->IO_ADDR_R);
- this = (struct nand_chip *) &ppchameleonevb_mtd[1];
- iounmap((void *) this->IO_ADDR_R);
-
- /* Free the MTD device structure */
- kfree (ppchameleon_mtd);
- kfree (ppchameleonevb_mtd);
-}
-module_exit(ppchameleonevb_cleanup);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("DAVE Srl <support-ppchameleon@dave-tech.it>");
-MODULE_DESCRIPTION("MTD map driver for DAVE Srl PPChameleonEVB board");
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 05:15:20 +0000