diff options
Diffstat (limited to 'drivers/mtd')
46 files changed, 3381 insertions, 1617 deletions
diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig index 5d49a2129618..94b821042d9d 100644 --- a/drivers/mtd/Kconfig +++ b/drivers/mtd/Kconfig @@ -321,6 +321,8 @@ source "drivers/mtd/onenand/Kconfig" source "drivers/mtd/lpddr/Kconfig" +source "drivers/mtd/spi-nor/Kconfig" + source "drivers/mtd/ubi/Kconfig" endif # MTD diff --git a/drivers/mtd/Makefile b/drivers/mtd/Makefile index 4cfb31e6c966..99bb9a1f6e16 100644 --- a/drivers/mtd/Makefile +++ b/drivers/mtd/Makefile @@ -32,4 +32,5 @@ inftl-objs := inftlcore.o inftlmount.o obj-y += chips/ lpddr/ maps/ devices/ nand/ onenand/ tests/ +obj-$(CONFIG_MTD_SPI_NOR) += spi-nor/ obj-$(CONFIG_MTD_UBI) += ubi/ diff --git a/drivers/mtd/chips/Kconfig b/drivers/mtd/chips/Kconfig index e4696b37f3de..9f02c28c0204 100644 --- a/drivers/mtd/chips/Kconfig +++ b/drivers/mtd/chips/Kconfig @@ -169,33 +169,33 @@ config MTD_OTP in the programming of OTP bits will waste them. config MTD_CFI_INTELEXT - tristate "Support for Intel/Sharp flash chips" + tristate "Support for CFI command set 0001 (Intel/Sharp chips)" depends on MTD_GEN_PROBE select MTD_CFI_UTIL help The Common Flash Interface defines a number of different command sets which a CFI-compliant chip may claim to implement. This code - provides support for one of those command sets, used on Intel - StrataFlash and other parts. + provides support for command set 0001, used on Intel StrataFlash + and other parts. config MTD_CFI_AMDSTD - tristate "Support for AMD/Fujitsu/Spansion flash chips" + tristate "Support for CFI command set 0002 (AMD/Fujitsu/Spansion chips)" depends on MTD_GEN_PROBE select MTD_CFI_UTIL help The Common Flash Interface defines a number of different command sets which a CFI-compliant chip may claim to implement. This code - provides support for one of those command sets, used on chips - including the AMD Am29LV320. + provides support for command set 0002, used on chips including + the AMD Am29LV320. config MTD_CFI_STAA - tristate "Support for ST (Advanced Architecture) flash chips" + tristate "Support for CFI command set 0020 (ST (Advanced Architecture) chips)" depends on MTD_GEN_PROBE select MTD_CFI_UTIL help The Common Flash Interface defines a number of different command sets which a CFI-compliant chip may claim to implement. This code - provides support for one of those command sets. + provides support for command set 0020. config MTD_CFI_UTIL tristate diff --git a/drivers/mtd/chips/cfi_cmdset_0020.c b/drivers/mtd/chips/cfi_cmdset_0020.c index 6293855fb5ee..423666b51efb 100644 --- a/drivers/mtd/chips/cfi_cmdset_0020.c +++ b/drivers/mtd/chips/cfi_cmdset_0020.c @@ -961,7 +961,7 @@ static int cfi_staa_erase_varsize(struct mtd_info *mtd, chipnum++; if (chipnum >= cfi->numchips) - break; + break; } } @@ -1170,7 +1170,7 @@ static int cfi_staa_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len) chipnum++; if (chipnum >= cfi->numchips) - break; + break; } } return 0; diff --git a/drivers/mtd/chips/cfi_util.c b/drivers/mtd/chips/cfi_util.c index 08049f6eea60..09c79bd0b4f4 100644 --- a/drivers/mtd/chips/cfi_util.c +++ b/drivers/mtd/chips/cfi_util.c @@ -239,7 +239,7 @@ int cfi_varsize_frob(struct mtd_info *mtd, varsize_frob_t frob, chipnum++; if (chipnum >= cfi->numchips) - break; + break; } } diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig index 1210bc2923b7..c49d0b127fef 100644 --- a/drivers/mtd/devices/Kconfig +++ b/drivers/mtd/devices/Kconfig @@ -80,7 +80,7 @@ config MTD_DATAFLASH_OTP config MTD_M25P80 tristate "Support most SPI Flash chips (AT26DF, M25P, W25X, ...)" - depends on SPI_MASTER + depends on SPI_MASTER && MTD_SPI_NOR help This enables access to most modern SPI flash chips, used for program and data storage. Series supported include Atmel AT26DF, @@ -212,7 +212,7 @@ config MTD_DOCG3 config MTD_ST_SPI_FSM tristate "ST Microelectronics SPI FSM Serial Flash Controller" - depends on ARM || SH + depends on ARCH_STI help This provides an MTD device driver for the ST Microelectronics SPI Fast Sequence Mode (FSM) Serial Flash Controller and support diff --git a/drivers/mtd/devices/elm.c b/drivers/mtd/devices/elm.c index 1fd4a0f77967..7df86948e6d4 100644 --- a/drivers/mtd/devices/elm.c +++ b/drivers/mtd/devices/elm.c @@ -213,6 +213,28 @@ static void elm_load_syndrome(struct elm_info *info, val = cpu_to_be32(*(u32 *) &ecc[0]) >> 12; elm_write_reg(info, offset, val); break; + case BCH16_ECC: + val = cpu_to_be32(*(u32 *) &ecc[22]); + elm_write_reg(info, offset, val); + offset += 4; + val = cpu_to_be32(*(u32 *) &ecc[18]); + elm_write_reg(info, offset, val); + offset += 4; + val = cpu_to_be32(*(u32 *) &ecc[14]); + elm_write_reg(info, offset, val); + offset += 4; + val = cpu_to_be32(*(u32 *) &ecc[10]); + elm_write_reg(info, offset, val); + offset += 4; + val = cpu_to_be32(*(u32 *) &ecc[6]); + elm_write_reg(info, offset, val); + offset += 4; + val = cpu_to_be32(*(u32 *) &ecc[2]); + elm_write_reg(info, offset, val); + offset += 4; + val = cpu_to_be32(*(u32 *) &ecc[0]) >> 16; + elm_write_reg(info, offset, val); + break; default: pr_err("invalid config bch_type\n"); } @@ -418,6 +440,7 @@ static int elm_remove(struct platform_device *pdev) return 0; } +#ifdef CONFIG_PM_SLEEP /** * elm_context_save * saves ELM configurations to preserve them across Hardware powered-down @@ -435,6 +458,13 @@ static int elm_context_save(struct elm_info *info) for (i = 0; i < ERROR_VECTOR_MAX; i++) { offset = i * SYNDROME_FRAGMENT_REG_SIZE; switch (bch_type) { + case BCH16_ECC: + regs->elm_syndrome_fragment_6[i] = elm_read_reg(info, + ELM_SYNDROME_FRAGMENT_6 + offset); + regs->elm_syndrome_fragment_5[i] = elm_read_reg(info, + ELM_SYNDROME_FRAGMENT_5 + offset); + regs->elm_syndrome_fragment_4[i] = elm_read_reg(info, + ELM_SYNDROME_FRAGMENT_4 + offset); case BCH8_ECC: regs->elm_syndrome_fragment_3[i] = elm_read_reg(info, ELM_SYNDROME_FRAGMENT_3 + offset); @@ -473,6 +503,13 @@ static int elm_context_restore(struct elm_info *info) for (i = 0; i < ERROR_VECTOR_MAX; i++) { offset = i * SYNDROME_FRAGMENT_REG_SIZE; switch (bch_type) { + case BCH16_ECC: + elm_write_reg(info, ELM_SYNDROME_FRAGMENT_6 + offset, + regs->elm_syndrome_fragment_6[i]); + elm_write_reg(info, ELM_SYNDROME_FRAGMENT_5 + offset, + regs->elm_syndrome_fragment_5[i]); + elm_write_reg(info, ELM_SYNDROME_FRAGMENT_4 + offset, + regs->elm_syndrome_fragment_4[i]); case BCH8_ECC: elm_write_reg(info, ELM_SYNDROME_FRAGMENT_3 + offset, regs->elm_syndrome_fragment_3[i]); @@ -509,6 +546,7 @@ static int elm_resume(struct device *dev) elm_context_restore(info); return 0; } +#endif static SIMPLE_DEV_PM_OPS(elm_pm_ops, elm_suspend, elm_resume); diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index 524dab3ac938..ed7e0a1bed3c 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -19,485 +19,98 @@ #include <linux/errno.h> #include <linux/module.h> #include <linux/device.h> -#include <linux/interrupt.h> -#include <linux/mutex.h> -#include <linux/math64.h> -#include <linux/slab.h> -#include <linux/sched.h> -#include <linux/mod_devicetable.h> -#include <linux/mtd/cfi.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> -#include <linux/of_platform.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> +#include <linux/mtd/spi-nor.h> -/* Flash opcodes. */ -#define OPCODE_WREN 0x06 /* Write enable */ -#define OPCODE_RDSR 0x05 /* Read status register */ -#define OPCODE_WRSR 0x01 /* Write status register 1 byte */ -#define OPCODE_NORM_READ 0x03 /* Read data bytes (low frequency) */ -#define OPCODE_FAST_READ 0x0b /* Read data bytes (high frequency) */ -#define OPCODE_DUAL_READ 0x3b /* Read data bytes (Dual SPI) */ -#define OPCODE_QUAD_READ 0x6b /* Read data bytes (Quad SPI) */ -#define OPCODE_PP 0x02 /* Page program (up to 256 bytes) */ -#define OPCODE_BE_4K 0x20 /* Erase 4KiB block */ -#define OPCODE_BE_4K_PMC 0xd7 /* Erase 4KiB block on PMC chips */ -#define OPCODE_BE_32K 0x52 /* Erase 32KiB block */ -#define OPCODE_CHIP_ERASE 0xc7 /* Erase whole flash chip */ -#define OPCODE_SE 0xd8 /* Sector erase (usually 64KiB) */ -#define OPCODE_RDID 0x9f /* Read JEDEC ID */ -#define OPCODE_RDCR 0x35 /* Read configuration register */ - -/* 4-byte address opcodes - used on Spansion and some Macronix flashes. */ -#define OPCODE_NORM_READ_4B 0x13 /* Read data bytes (low frequency) */ -#define OPCODE_FAST_READ_4B 0x0c /* Read data bytes (high frequency) */ -#define OPCODE_DUAL_READ_4B 0x3c /* Read data bytes (Dual SPI) */ -#define OPCODE_QUAD_READ_4B 0x6c /* Read data bytes (Quad SPI) */ -#define OPCODE_PP_4B 0x12 /* Page program (up to 256 bytes) */ -#define OPCODE_SE_4B 0xdc /* Sector erase (usually 64KiB) */ - -/* Used for SST flashes only. */ -#define OPCODE_BP 0x02 /* Byte program */ -#define OPCODE_WRDI 0x04 /* Write disable */ -#define OPCODE_AAI_WP 0xad /* Auto address increment word program */ - -/* Used for Macronix and Winbond flashes. */ -#define OPCODE_EN4B 0xb7 /* Enter 4-byte mode */ -#define OPCODE_EX4B 0xe9 /* Exit 4-byte mode */ - -/* Used for Spansion flashes only. */ -#define OPCODE_BRWR 0x17 /* Bank register write */ - -/* Status Register bits. */ -#define SR_WIP 1 /* Write in progress */ -#define SR_WEL 2 /* Write enable latch */ -/* meaning of other SR_* bits may differ between vendors */ -#define SR_BP0 4 /* Block protect 0 */ -#define SR_BP1 8 /* Block protect 1 */ -#define SR_BP2 0x10 /* Block protect 2 */ -#define SR_SRWD 0x80 /* SR write protect */ - -#define SR_QUAD_EN_MX 0x40 /* Macronix Quad I/O */ - -/* Configuration Register bits. */ -#define CR_QUAD_EN_SPAN 0x2 /* Spansion Quad I/O */ - -/* Define max times to check status register before we give up. */ -#define MAX_READY_WAIT_JIFFIES (40 * HZ) /* M25P16 specs 40s max chip erase */ #define MAX_CMD_SIZE 6 - -#define JEDEC_MFR(_jedec_id) ((_jedec_id) >> 16) - -/****************************************************************************/ - -enum read_type { - M25P80_NORMAL = 0, - M25P80_FAST, - M25P80_DUAL, - M25P80_QUAD, -}; - struct m25p { struct spi_device *spi; - struct mutex lock; + struct spi_nor spi_nor; struct mtd_info mtd; - u16 page_size; - u16 addr_width; - u8 erase_opcode; - u8 read_opcode; - u8 program_opcode; - u8 *command; - enum read_type flash_read; + u8 command[MAX_CMD_SIZE]; }; -static inline struct m25p *mtd_to_m25p(struct mtd_info *mtd) -{ - return container_of(mtd, struct m25p, mtd); -} - -/****************************************************************************/ - -/* - * Internal helper functions - */ - -/* - * Read the status register, returning its value in the location - * Return the status register value. - * Returns negative if error occurred. - */ -static int read_sr(struct m25p *flash) -{ - ssize_t retval; - u8 code = OPCODE_RDSR; - u8 val; - - retval = spi_write_then_read(flash->spi, &code, 1, &val, 1); - - if (retval < 0) { - dev_err(&flash->spi->dev, "error %d reading SR\n", - (int) retval); - return retval; - } - - return val; -} - -/* - * Read configuration register, returning its value in the - * location. Return the configuration register value. - * Returns negative if error occured. - */ -static int read_cr(struct m25p *flash) -{ - u8 code = OPCODE_RDCR; - int ret; - u8 val; - - ret = spi_write_then_read(flash->spi, &code, 1, &val, 1); - if (ret < 0) { - dev_err(&flash->spi->dev, "error %d reading CR\n", ret); - return ret; - } - - return val; -} - -/* - * Write status register 1 byte - * Returns negative if error occurred. - */ -static int write_sr(struct m25p *flash, u8 val) -{ - flash->command[0] = OPCODE_WRSR; - flash->command[1] = val; - - return spi_write(flash->spi, flash->command, 2); -} - -/* - * Set write enable latch with Write Enable command. - * Returns negative if error occurred. - */ -static inline int write_enable(struct m25p *flash) -{ - u8 code = OPCODE_WREN; - - return spi_write_then_read(flash->spi, &code, 1, NULL, 0); -} - -/* - * Send write disble instruction to the chip. - */ -static inline int write_disable(struct m25p *flash) -{ - u8 code = OPCODE_WRDI; - - return spi_write_then_read(flash->spi, &code, 1, NULL, 0); -} - -/* - * Enable/disable 4-byte addressing mode. - */ -static inline int set_4byte(struct m25p *flash, u32 jedec_id, int enable) -{ - int status; - bool need_wren = false; - - switch (JEDEC_MFR(jedec_id)) { - case CFI_MFR_ST: /* Micron, actually */ - /* Some Micron need WREN command; all will accept it */ - need_wren = true; - case CFI_MFR_MACRONIX: - case 0xEF /* winbond */: - if (need_wren) - write_enable(flash); - - flash->command[0] = enable ? OPCODE_EN4B : OPCODE_EX4B; - status = spi_write(flash->spi, flash->command, 1); - - if (need_wren) - write_disable(flash); - - return status; - default: - /* Spansion style */ - flash->command[0] = OPCODE_BRWR; - flash->command[1] = enable << 7; - return spi_write(flash->spi, flash->command, 2); - } -} - -/* - * Service routine to read status register until ready, or timeout occurs. - * Returns non-zero if error. - */ -static int wait_till_ready(struct m25p *flash) -{ - unsigned long deadline; - int sr; - - deadline = jiffies + MAX_READY_WAIT_JIFFIES; - - do { - if ((sr = read_sr(flash)) < 0) - break; - else if (!(sr & SR_WIP)) - return 0; - - cond_resched(); - - } while (!time_after_eq(jiffies, deadline)); - - return 1; -} - -/* - * Write status Register and configuration register with 2 bytes - * The first byte will be written to the status register, while the - * second byte will be written to the configuration register. - * Return negative if error occured. - */ -static int write_sr_cr(struct m25p *flash, u16 val) -{ - flash->command[0] = OPCODE_WRSR; - flash->command[1] = val & 0xff; - flash->command[2] = (val >> 8); - - return spi_write(flash->spi, flash->command, 3); -} - -static int macronix_quad_enable(struct m25p *flash) -{ - int ret, val; - u8 cmd[2]; - cmd[0] = OPCODE_WRSR; - - val = read_sr(flash); - cmd[1] = val | SR_QUAD_EN_MX; - write_enable(flash); - - spi_write(flash->spi, &cmd, 2); - - if (wait_till_ready(flash)) - return 1; - - ret = read_sr(flash); - if (!(ret > 0 && (ret & SR_QUAD_EN_MX))) { - dev_err(&flash->spi->dev, "Macronix Quad bit not set\n"); - return -EINVAL; - } - - return 0; -} - -static int spansion_quad_enable(struct m25p *flash) +static int m25p80_read_reg(struct spi_nor *nor, u8 code, u8 *val, int len) { + struct m25p *flash = nor->priv; + struct spi_device *spi = flash->spi; int ret; - int quad_en = CR_QUAD_EN_SPAN << 8; - - write_enable(flash); - ret = write_sr_cr(flash, quad_en); - if (ret < 0) { - dev_err(&flash->spi->dev, - "error while writing configuration register\n"); - return -EINVAL; - } - - /* read back and check it */ - ret = read_cr(flash); - if (!(ret > 0 && (ret & CR_QUAD_EN_SPAN))) { - dev_err(&flash->spi->dev, "Spansion Quad bit not set\n"); - return -EINVAL; - } - - return 0; -} - -static int set_quad_mode(struct m25p *flash, u32 jedec_id) -{ - int status; - - switch (JEDEC_MFR(jedec_id)) { - case CFI_MFR_MACRONIX: - status = macronix_quad_enable(flash); - if (status) { - dev_err(&flash->spi->dev, - "Macronix quad-read not enabled\n"); - return -EINVAL; - } - return status; - default: - status = spansion_quad_enable(flash); - if (status) { - dev_err(&flash->spi->dev, - "Spansion quad-read not enabled\n"); - return -EINVAL; - } - return status; - } -} - -/* - * Erase the whole flash memory - * - * Returns 0 if successful, non-zero otherwise. - */ -static int erase_chip(struct m25p *flash) -{ - pr_debug("%s: %s %lldKiB\n", dev_name(&flash->spi->dev), __func__, - (long long)(flash->mtd.size >> 10)); + ret = spi_write_then_read(spi, &code, 1, val, len); + if (ret < 0) + dev_err(&spi->dev, "error %d reading %x\n", ret, code); - /* Wait until finished previous write command. */ - if (wait_till_ready(flash)) - return 1; - - /* Send write enable, then erase commands. */ - write_enable(flash); - - /* Set up command buffer. */ - flash->command[0] = OPCODE_CHIP_ERASE; - - spi_write(flash->spi, flash->command, 1); - - return 0; + return ret; } -static void m25p_addr2cmd(struct m25p *flash, unsigned int addr, u8 *cmd) +static void m25p_addr2cmd(struct spi_nor *nor, unsigned int addr, u8 *cmd) { /* opcode is in cmd[0] */ - cmd[1] = addr >> (flash->addr_width * 8 - 8); - cmd[2] = addr >> (flash->addr_width * 8 - 16); - cmd[3] = addr >> (flash->addr_width * 8 - 24); - cmd[4] = addr >> (flash->addr_width * 8 - 32); + cmd[1] = addr >> (nor->addr_width * 8 - 8); + cmd[2] = addr >> (nor->addr_width * 8 - 16); + cmd[3] = addr >> (nor->addr_width * 8 - 24); + cmd[4] = addr >> (nor->addr_width * 8 - 32); } -static int m25p_cmdsz(struct m25p *flash) +static int m25p_cmdsz(struct spi_nor *nor) { - return 1 + flash->addr_width; + return 1 + nor->addr_width; } -/* - * Erase one sector of flash memory at offset ``offset'' which is any - * address within the sector which should be erased. - * - * Returns 0 if successful, non-zero otherwise. - */ -static int erase_sector(struct m25p *flash, u32 offset) +static int m25p80_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len, + int wr_en) { - pr_debug("%s: %s %dKiB at 0x%08x\n", dev_name(&flash->spi->dev), - __func__, flash->mtd.erasesize / 1024, offset); - - /* Wait until finished previous write command. */ - if (wait_till_ready(flash)) - return 1; + struct m25p *flash = nor->priv; + struct spi_device *spi = flash->spi; - /* Send write enable, then erase commands. */ - write_enable(flash); - - /* Set up command buffer. */ - flash->command[0] = flash->erase_opcode; - m25p_addr2cmd(flash, offset, flash->command); - - spi_write(flash->spi, flash->command, m25p_cmdsz(flash)); + flash->command[0] = opcode; + if (buf) + memcpy(&flash->command[1], buf, len); - return 0; + return spi_write(spi, flash->command, len + 1); } -/****************************************************************************/ - -/* - * MTD implementation - */ - -/* - * Erase an address range on the flash chip. The address range may extend - * one or more erase sectors. Return an error is there is a problem erasing. - */ -static int m25p80_erase(struct mtd_info *mtd, struct erase_info *instr) +static void m25p80_write(struct spi_nor *nor, loff_t to, size_t len, + size_t *retlen, const u_char *buf) { - struct m25p *flash = mtd_to_m25p(mtd); - u32 addr,len; - uint32_t rem; - - pr_debug("%s: %s at 0x%llx, len %lld\n", dev_name(&flash->spi->dev), - __func__, (long long)instr->addr, - (long long)instr->len); - - div_u64_rem(instr->len, mtd->erasesize, &rem); - if (rem) - return -EINVAL; - - addr = instr->addr; - len = instr->len; - - mutex_lock(&flash->lock); - - /* whole-chip erase? */ - if (len == flash->mtd.size) { - if (erase_chip(flash)) { - instr->state = MTD_ERASE_FAILED; - mutex_unlock(&flash->lock); - return -EIO; - } + struct m25p *flash = nor->priv; + struct spi_device *spi = flash->spi; + struct spi_transfer t[2] = {}; + struct spi_message m; + int cmd_sz = m25p_cmdsz(nor); - /* REVISIT in some cases we could speed up erasing large regions - * by using OPCODE_SE instead of OPCODE_BE_4K. We may have set up - * to use "small sector erase", but that's not always optimal. - */ + spi_message_init(&m); - /* "sector"-at-a-time erase */ - } else { - while (len) { - if (erase_sector(flash, addr)) { - instr->state = MTD_ERASE_FAILED; - mutex_unlock(&flash->lock); - return -EIO; - } + if (nor->program_opcode == SPINOR_OP_AAI_WP && nor->sst_write_second) + cmd_sz = 1; - addr += mtd->erasesize; - len -= mtd->erasesize; - } - } + flash->command[0] = nor->program_opcode; + m25p_addr2cmd(nor, to, flash->command); - mutex_unlock(&flash->lock); + t[0].tx_buf = flash->command; + t[0].len = cmd_sz; + spi_message_add_tail(&t[0], &m); - instr->state = MTD_ERASE_DONE; - mtd_erase_callback(instr); + t[1].tx_buf = buf; + t[1].len = len; + spi_message_add_tail(&t[1], &m); - return 0; -} + spi_sync(spi, &m); -/* - * Dummy Cycle calculation for different type of read. - * It can be used to support more commands with - * different dummy cycle requirements. - */ -static inline int m25p80_dummy_cycles_read(struct m25p *flash) -{ - switch (flash->flash_read) { - case M25P80_FAST: - case M25P80_DUAL: - case M25P80_QUAD: - return 1; - case M25P80_NORMAL: - return 0; - default: - dev_err(&flash->spi->dev, "No valid read type supported\n"); - return -1; - } + *retlen += m.actual_length - cmd_sz; } -static inline unsigned int m25p80_rx_nbits(const struct m25p *flash) +static inline unsigned int m25p80_rx_nbits(struct spi_nor *nor) { - switch (flash->flash_read) { - case M25P80_DUAL: + switch (nor->flash_read) { + case SPI_NOR_DUAL: return 2; - case M25P80_QUAD: + case SPI_NOR_QUAD: return 4; default: return 0; @@ -505,590 +118,72 @@ static inline unsigned int m25p80_rx_nbits(const struct m25p *flash) } /* - * Read an address range from the flash chip. The address range + * Read an address range from the nor chip. The address range * may be any size provided it is within the physical boundaries. */ -static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len, - size_t *retlen, u_char *buf) +static int m25p80_read(struct spi_nor *nor, loff_t from, size_t len, + size_t *retlen, u_char *buf) { - struct m25p *flash = mtd_to_m25p(mtd); + struct m25p *flash = nor->priv; + struct spi_device *spi = flash->spi; struct spi_transfer t[2]; struct spi_message m; - uint8_t opcode; - int dummy; + int dummy = nor->read_dummy; + int ret; - pr_debug("%s: %s from 0x%08x, len %zd\n", dev_name(&flash->spi->dev), - __func__, (u32)from, len); + /* Wait till previous write/erase is done. */ + ret = nor->wait_till_ready(nor); + if (ret) + return ret; spi_message_init(&m); memset(t, 0, (sizeof t)); - dummy = m25p80_dummy_cycles_read(flash); - if (dummy < 0) { - dev_err(&flash->spi->dev, "No valid read command supported\n"); - return -EINVAL; - } + flash->command[0] = nor->read_opcode; + m25p_addr2cmd(nor, from, flash->command); t[0].tx_buf = flash->command; - t[0].len = m25p_cmdsz(flash) + dummy; + t[0].len = m25p_cmdsz(nor) + dummy; spi_message_add_tail(&t[0], &m); t[1].rx_buf = buf; - t[1].rx_nbits = m25p80_rx_nbits(flash); + t[1].rx_nbits = m25p80_rx_nbits(nor); t[1].len = len; spi_message_add_tail(&t[1], &m); - mutex_lock(&flash->lock); - - /* Wait till previous write/erase is done. */ - if (wait_till_ready(flash)) { - /* REVISIT status return?? */ - mutex_unlock(&flash->lock); - return 1; - } - - /* Set up the write data buffer. */ - opcode = flash->read_opcode; - flash->command[0] = opcode; - m25p_addr2cmd(flash, from, flash->command); - - spi_sync(flash->spi, &m); - - *retlen = m.actual_length - m25p_cmdsz(flash) - dummy; - - mutex_unlock(&flash->lock); + spi_sync(spi, &m); + *retlen = m.actual_length - m25p_cmdsz(nor) - dummy; return 0; } -/* - * Write an address range to the flash chip. Data must be written in - * FLASH_PAGESIZE chunks. The address range may be any size provided - * it is within the physical boundaries. - */ -static int m25p80_write(struct mtd_info *mtd, loff_t to, size_t len, - size_t *retlen, const u_char *buf) +static int m25p80_erase(struct spi_nor *nor, loff_t offset) { - struct m25p *flash = mtd_to_m25p(mtd); - u32 page_offset, page_size; - struct spi_transfer t[2]; - struct spi_message m; - - pr_debug("%s: %s to 0x%08x, len %zd\n", dev_name(&flash->spi->dev), - __func__, (u32)to, len); - - spi_message_init(&m); - memset(t, 0, (sizeof t)); - - t[0].tx_buf = flash->command; - t[0].len = m25p_cmdsz(flash); - spi_message_add_tail(&t[0], &m); - - t[1].tx_buf = buf; - spi_message_add_tail(&t[1], &m); - - mutex_lock(&flash->lock); - - /* Wait until finished previous write command. */ - if (wait_till_ready(flash)) { - mutex_unlock(&flash->lock); - return 1; - } - - write_enable(flash); - - /* Set up the opcode in the write buffer. */ - flash->command[0] = flash->program_opcode; - m25p_addr2cmd(flash, to, flash->command); - - page_offset = to & (flash->page_size - 1); - - /* do all the bytes fit onto one page? */ - if (page_offset + len <= flash->page_size) { - t[1].len = len; - - spi_sync(flash->spi, &m); - - *retlen = m.actual_length - m25p_cmdsz(flash); - } else { - u32 i; - - /* the size of data remaining on the first page */ - page_size = flash->page_size - page_offset; - - t[1].len = page_size; - spi_sync(flash->spi, &m); - - *retlen = m.actual_length - m25p_cmdsz(flash); - - /* write everything in flash->page_size chunks */ - for (i = page_size; i < len; i += page_size) { - page_size = len - i; - if (page_size > flash->page_size) - page_size = flash->page_size; - - /* write the next page to flash */ - m25p_addr2cmd(flash, to + i, flash->command); - - t[1].tx_buf = buf + i; - t[1].len = page_size; - - wait_till_ready(flash); - - write_enable(flash); - - spi_sync(flash->spi, &m); - - *retlen += m.actual_length - m25p_cmdsz(flash); - } - } - - mutex_unlock(&flash->lock); - - return 0; -} - -static int sst_write(struct mtd_info *mtd, loff_t to, size_t len, - size_t *retlen, const u_char *buf) -{ - struct m25p *flash = mtd_to_m25p(mtd); - struct spi_transfer t[2]; - struct spi_message m; - size_t actual; - int cmd_sz, ret; - - pr_debug("%s: %s to 0x%08x, len %zd\n", dev_name(&flash->spi->dev), - __func__, (u32)to, len); - - spi_message_init(&m); - memset(t, 0, (sizeof t)); - - t[0].tx_buf = flash->command; - t[0].len = m25p_cmdsz(flash); - spi_message_add_tail(&t[0], &m); - - t[1].tx_buf = buf; - spi_message_add_tail(&t[1], &m); + struct m25p *flash = nor->priv; + int ret; - mutex_lock(&flash->lock); + dev_dbg(nor->dev, "%dKiB at 0x%08x\n", + flash->mtd.erasesize / 1024, (u32)offset); /* Wait until finished previous write command. */ - ret = wait_till_ready(flash); + ret = nor->wait_till_ready(nor); if (ret) - goto time_out; - - write_enable(flash); - - actual = to % 2; - /* Start write from odd address. */ - if (actual) { - flash->command[0] = OPCODE_BP; - m25p_addr2cmd(flash, to, flash->command); - - /* write one byte. */ - t[1].len = 1; - spi_sync(flash->spi, &m); - ret = wait_till_ready(flash); - if (ret) - goto time_out; - *retlen += m.actual_length - m25p_cmdsz(flash); - } - to += actual; - - flash->command[0] = OPCODE_AAI_WP; - m25p_addr2cmd(flash, to, flash->command); - - /* Write out most of the data here. */ - cmd_sz = m25p_cmdsz(flash); - for (; actual < len - 1; actual += 2) { - t[0].len = cmd_sz; - /* write two bytes. */ - t[1].len = 2; - t[1].tx_buf = buf + actual; + return ret; - spi_sync(flash->spi, &m); - ret = wait_till_ready(flash); - if (ret) - goto time_out; - *retlen += m.actual_length - cmd_sz; - cmd_sz = 1; - to += 2; - } - write_disable(flash); - ret = wait_till_ready(flash); + /* Send write enable, then erase commands. */ + ret = nor->write_reg(nor, SPINOR_OP_WREN, NULL, 0, 0); if (ret) - goto time_out; - - /* Write out trailing byte if it exists. */ - if (actual != len) { - write_enable(flash); - flash->command[0] = OPCODE_BP; - m25p_addr2cmd(flash, to, flash->command); - t[0].len = m25p_cmdsz(flash); - t[1].len = 1; - t[1].tx_buf = buf + actual; - - spi_sync(flash->spi, &m); - ret = wait_till_ready(flash); - if (ret) - goto time_out; - *retlen += m.actual_length - m25p_cmdsz(flash); - write_disable(flash); - } - -time_out: - mutex_unlock(&flash->lock); - return ret; -} - -static int m25p80_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len) -{ - struct m25p *flash = mtd_to_m25p(mtd); - uint32_t offset = ofs; - uint8_t status_old, status_new; - int res = 0; - - mutex_lock(&flash->lock); - /* Wait until finished previous command */ - if (wait_till_ready(flash)) { - res = 1; - goto err; - } - - status_old = read_sr(flash); - - if (offset < flash->mtd.size-(flash->mtd.size/2)) - status_new = status_old | SR_BP2 | SR_BP1 | SR_BP0; - else if (offset < flash->mtd.size-(flash->mtd.size/4)) - status_new = (status_old & ~SR_BP0) | SR_BP2 | SR_BP1; - else if (offset < flash->mtd.size-(flash->mtd.size/8)) - status_new = (status_old & ~SR_BP1) | SR_BP2 | SR_BP0; - else if (offset < flash->mtd.size-(flash->mtd.size/16)) - status_new = (status_old & ~(SR_BP0|SR_BP1)) | SR_BP2; - else if (offset < flash->mtd.size-(flash->mtd.size/32)) - status_new = (status_old & ~SR_BP2) | SR_BP1 | SR_BP0; - else if (offset < flash->mtd.size-(flash->mtd.size/64)) - status_new = (status_old & ~(SR_BP2|SR_BP0)) | SR_BP1; - else - status_new = (status_old & ~(SR_BP2|SR_BP1)) | SR_BP0; - - /* Only modify protection if it will not unlock other areas */ - if ((status_new&(SR_BP2|SR_BP1|SR_BP0)) > - (status_old&(SR_BP2|SR_BP1|SR_BP0))) { - write_enable(flash); - if (write_sr(flash, status_new) < 0) { - res = 1; - goto err; - } - } - -err: mutex_unlock(&flash->lock); - return res; -} - -static int m25p80_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len) -{ - struct m25p *flash = mtd_to_m25p(mtd); - uint32_t offset = ofs; - uint8_t status_old, status_new; - int res = 0; - - mutex_lock(&flash->lock); - /* Wait until finished previous command */ - if (wait_till_ready(flash)) { - res = 1; - goto err; - } - - status_old = read_sr(flash); - - if (offset+len > flash->mtd.size-(flash->mtd.size/64)) - status_new = status_old & ~(SR_BP2|SR_BP1|SR_BP0); - else if (offset+len > flash->mtd.size-(flash->mtd.size/32)) - status_new = (status_old & ~(SR_BP2|SR_BP1)) | SR_BP0; - else if (offset+len > flash->mtd.size-(flash->mtd.size/16)) - status_new = (status_old & ~(SR_BP2|SR_BP0)) | SR_BP1; - else if (offset+len > flash->mtd.size-(flash->mtd.size/8)) - status_new = (status_old & ~SR_BP2) | SR_BP1 | SR_BP0; - else if (offset+len > flash->mtd.size-(flash->mtd.size/4)) - status_new = (status_old & ~(SR_BP0|SR_BP1)) | SR_BP2; - else if (offset+len > flash->mtd.size-(flash->mtd.size/2)) - status_new = (status_old & ~SR_BP1) | SR_BP2 | SR_BP0; - else - status_new = (status_old & ~SR_BP0) | SR_BP2 | SR_BP1; - - /* Only modify protection if it will not lock other areas */ - if ((status_new&(SR_BP2|SR_BP1|SR_BP0)) < - (status_old&(SR_BP2|SR_BP1|SR_BP0))) { - write_enable(flash); - if (write_sr(flash, status_new) < 0) { - res = 1; - goto err; - } - } - -err: mutex_unlock(&flash->lock); - return res; -} - -/****************************************************************************/ - -/* - * SPI device driver setup and teardown - */ - -struct flash_info { - /* JEDEC id zero means "no ID" (most older chips); otherwise it has - * a high byte of zero plus three data bytes: the manufacturer id, - * then a two byte device id. - */ - u32 jedec_id; - u16 ext_id; - - /* The size listed here is what works with OPCODE_SE, which isn't - * necessarily called a "sector" by the vendor. - */ - unsigned sector_size; - u16 n_sectors; - - u16 page_size; - u16 addr_width; - - u16 flags; -#define SECT_4K 0x01 /* OPCODE_BE_4K works uniformly */ -#define M25P_NO_ERASE 0x02 /* No erase command needed */ -#define SST_WRITE 0x04 /* use SST byte programming */ -#define M25P_NO_FR 0x08 /* Can't do fastread */ -#define SECT_4K_PMC 0x10 /* OPCODE_BE_4K_PMC works uniformly */ -#define M25P80_DUAL_READ 0x20 /* Flash supports Dual Read */ -#define M25P80_QUAD_READ 0x40 /* Flash supports Quad Read */ -}; - -#define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags) \ - ((kernel_ulong_t)&(struct flash_info) { \ - .jedec_id = (_jedec_id), \ - .ext_id = (_ext_id), \ - .sector_size = (_sector_size), \ - .n_sectors = (_n_sectors), \ - .page_size = 256, \ - .flags = (_flags), \ - }) - -#define CAT25_INFO(_sector_size, _n_sectors, _page_size, _addr_width, _flags) \ - ((kernel_ulong_t)&(struct flash_info) { \ - .sector_size = (_sector_size), \ - .n_sectors = (_n_sectors), \ - .page_size = (_page_size), \ - .addr_width = (_addr_width), \ - .flags = (_flags), \ - }) - -/* NOTE: double check command sets and memory organization when you add - * more flash chips. This current list focusses on newer chips, which - * have been converging on command sets which including JEDEC ID. - */ -static const struct spi_device_id m25p_ids[] = { - /* Atmel -- some are (confusingly) marketed as "DataFlash" */ - { "at25fs010", INFO(0x1f6601, 0, 32 * 1024, 4, SECT_4K) }, - { "at25fs040", INFO(0x1f6604, 0, 64 * 1024, 8, SECT_4K) }, - - { "at25df041a", INFO(0x1f4401, 0, 64 * 1024, 8, SECT_4K) }, - { "at25df321a", INFO(0x1f4701, 0, 64 * 1024, 64, SECT_4K) }, - { "at25df641", INFO(0x1f4800, 0, 64 * 1024, 128, SECT_4K) }, - - { "at26f004", INFO(0x1f0400, 0, 64 * 1024, 8, SECT_4K) }, - { "at26df081a", INFO(0x1f4501, 0, 64 * 1024, 16, SECT_4K) }, - { "at26df161a", INFO(0x1f4601, 0, 64 * 1024, 32, SECT_4K) }, - { "at26df321", INFO(0x1f4700, 0, 64 * 1024, 64, SECT_4K) }, - - { "at45db081d", INFO(0x1f2500, 0, 64 * 1024, 16, SECT_4K) }, - - /* EON -- en25xxx */ - { "en25f32", INFO(0x1c3116, 0, 64 * 1024, 64, SECT_4K) }, - { "en25p32", INFO(0x1c2016, 0, 64 * 1024, 64, 0) }, - { "en25q32b", INFO(0x1c3016, 0, 64 * 1024, 64, 0) }, - { "en25p64", INFO(0x1c2017, 0, 64 * 1024, 128, 0) }, - { "en25q64", INFO(0x1c3017, 0, 64 * 1024, 128, SECT_4K) }, - { "en25qh256", INFO(0x1c7019, 0, 64 * 1024, 512, 0) }, - - /* ESMT */ - { "f25l32pa", INFO(0x8c2016, 0, 64 * 1024, 64, SECT_4K) }, - - /* Everspin */ - { "mr25h256", CAT25_INFO( 32 * 1024, 1, 256, 2, M25P_NO_ERASE | M25P_NO_FR) }, - { "mr25h10", CAT25_INFO(128 * 1024, 1, 256, 3, M25P_NO_ERASE | M25P_NO_FR) }, - - /* GigaDevice */ - { "gd25q32", INFO(0xc84016, 0, 64 * 1024, 64, SECT_4K) }, - { "gd25q64", INFO(0xc84017, 0, 64 * 1024, 128, SECT_4K) }, - - /* Intel/Numonyx -- xxxs33b */ - { "160s33b", INFO(0x898911, 0, 64 * 1024, 32, 0) }, - { "320s33b", INFO(0x898912, 0, 64 * 1024, 64, 0) }, - { "640s33b", INFO(0x898913, 0, 64 * 1024, 128, 0) }, - - /* Macronix */ - { "mx25l2005a", INFO(0xc22012, 0, 64 * 1024, 4, SECT_4K) }, - { "mx25l4005a", INFO(0xc22013, 0, 64 * 1024, 8, SECT_4K) }, - { "mx25l8005", INFO(0xc22014, 0, 64 * 1024, 16, 0) }, - { "mx25l1606e", INFO(0xc22015, 0, 64 * 1024, 32, SECT_4K) }, - { "mx25l3205d", INFO(0xc22016, 0, 64 * 1024, 64, 0) }, - { "mx25l3255e", INFO(0xc29e16, 0, 64 * 1024, 64, SECT_4K) }, - { "mx25l6405d", INFO(0xc22017, 0, 64 * 1024, 128, 0) }, - { "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) }, - { "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) }, - { "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, 0) }, - { "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) }, - { "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, M25P80_QUAD_READ) }, - { "mx66l1g55g", INFO(0xc2261b, 0, 64 * 1024, 2048, M25P80_QUAD_READ) }, - - /* Micron */ - { "n25q064", INFO(0x20ba17, 0, 64 * 1024, 128, 0) }, - { "n25q128a11", INFO(0x20bb18, 0, 64 * 1024, 256, 0) }, - { "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256, 0) }, - { "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512, SECT_4K) }, - { "n25q512a", INFO(0x20bb20, 0, 64 * 1024, 1024, SECT_4K) }, - - /* PMC */ - { "pm25lv512", INFO(0, 0, 32 * 1024, 2, SECT_4K_PMC) }, - { "pm25lv010", INFO(0, 0, 32 * 1024, 4, SECT_4K_PMC) }, - { "pm25lq032", INFO(0x7f9d46, 0, 64 * 1024, 64, SECT_4K) }, - - /* Spansion -- single (large) sector size only, at least - * for the chips listed here (without boot sectors). - */ - { "s25sl032p", INFO(0x010215, 0x4d00, 64 * 1024, 64, 0) }, - { "s25sl064p", INFO(0x010216, 0x4d00, 64 * 1024, 128, 0) }, - { "s25fl256s0", INFO(0x010219, 0x4d00, 256 * 1024, 128, 0) }, - { "s25fl256s1", INFO(0x010219, 0x4d01, 64 * 1024, 512, M25P80_DUAL_READ | M25P80_QUAD_READ) }, - { "s25fl512s", INFO(0x010220, 0x4d00, 256 * 1024, 256, M25P80_DUAL_READ | M25P80_QUAD_READ) }, - { "s70fl01gs", INFO(0x010221, 0x4d00, 256 * 1024, 256, 0) }, - { "s25sl12800", INFO(0x012018, 0x0300, 256 * 1024, 64, 0) }, - { "s25sl12801", INFO(0x012018, 0x0301, 64 * 1024, 256, 0) }, - { "s25fl129p0", INFO(0x012018, 0x4d00, 256 * 1024, 64, 0) }, - { "s25fl129p1", INFO(0x012018, 0x4d01, 64 * 1024, 256, 0) }, - { "s25sl004a", INFO(0x010212, 0, 64 * 1024, 8, 0) }, - { "s25sl008a", INFO(0x010213, 0, 64 * 1024, 16, 0) }, - { "s25sl016a", INFO(0x010214, 0, 64 * 1024, 32, 0) }, - { "s25sl032a", INFO(0x010215, 0, 64 * 1024, 64, 0) }, - { "s25sl064a", INFO(0x010216, 0, 64 * 1024, 128, 0) }, - { "s25fl008k", INFO(0xef4014, 0, 64 * 1024, 16, SECT_4K) }, - { "s25fl016k", INFO(0xef4015, 0, 64 * 1024, 32, SECT_4K) }, - { "s25fl064k", INFO(0xef4017, 0, 64 * 1024, 128, SECT_4K) }, - - /* SST -- large erase sizes are "overlays", "sectors" are 4K */ - { "sst25vf040b", INFO(0xbf258d, 0, 64 * 1024, 8, SECT_4K | SST_WRITE) }, - { "sst25vf080b", INFO(0xbf258e, 0, 64 * 1024, 16, SECT_4K | SST_WRITE) }, - { "sst25vf016b", INFO(0xbf2541, 0, 64 * 1024, 32, SECT_4K | SST_WRITE) }, - { "sst25vf032b", INFO(0xbf254a, 0, 64 * 1024, 64, SECT_4K | SST_WRITE) }, - { "sst25vf064c", INFO(0xbf254b, 0, 64 * 1024, 128, SECT_4K) }, - { "sst25wf512", INFO(0xbf2501, 0, 64 * 1024, 1, SECT_4K | SST_WRITE) }, - { "sst25wf010", INFO(0xbf2502, 0, 64 * 1024, 2, SECT_4K | SST_WRITE) }, - { "sst25wf020", INFO(0xbf2503, 0, 64 * 1024, 4, SECT_4K | SST_WRITE) }, - { "sst25wf040", INFO(0xbf2504, 0, 64 * 1024, 8, SECT_4K | SST_WRITE) }, - - /* ST Microelectronics -- newer production may have feature updates */ - { "m25p05", INFO(0x202010, 0, 32 * 1024, 2, 0) }, - { "m25p10", INFO(0x202011, 0, 32 * 1024, 4, 0) }, - { "m25p20", INFO(0x202012, 0, 64 * 1024, 4, 0) }, - { "m25p40", INFO(0x202013, 0, 64 * 1024, 8, 0) }, - { "m25p80", INFO(0x202014, 0, 64 * 1024, 16, 0) }, - { "m25p16", INFO(0x202015, 0, 64 * 1024, 32, 0) }, - { "m25p32", INFO(0x202016, 0, 64 * 1024, 64, 0) }, - { "m25p64", INFO(0x202017, 0, 64 * 1024, 128, 0) }, - { "m25p128", INFO(0x202018, 0, 256 * 1024, 64, 0) }, - { "n25q032", INFO(0x20ba16, 0, 64 * 1024, 64, 0) }, - - { "m25p05-nonjedec", INFO(0, 0, 32 * 1024, 2, 0) }, - { "m25p10-nonjedec", INFO(0, 0, 32 * 1024, 4, 0) }, - { "m25p20-nonjedec", INFO(0, 0, 64 * 1024, 4, 0) }, - { "m25p40-nonjedec", INFO(0, 0, 64 * 1024, 8, 0) }, - { "m25p80-nonjedec", INFO(0, 0, 64 * 1024, 16, 0) }, - { "m25p16-nonjedec", INFO(0, 0, 64 * 1024, 32, 0) }, - { "m25p32-nonjedec", INFO(0, 0, 64 * 1024, 64, 0) }, - { "m25p64-nonjedec", INFO(0, 0, 64 * 1024, 128, 0) }, - { "m25p128-nonjedec", INFO(0, 0, 256 * 1024, 64, 0) }, - - { "m45pe10", INFO(0x204011, 0, 64 * 1024, 2, 0) }, - { "m45pe80", INFO(0x204014, 0, 64 * 1024, 16, 0) }, - { "m45pe16", INFO(0x204015, 0, 64 * 1024, 32, 0) }, - - { "m25pe20", INFO(0x208012, 0, 64 * 1024, 4, 0) }, - { "m25pe80", INFO(0x208014, 0, 64 * 1024, 16, 0) }, - { "m25pe16", INFO(0x208015, 0, 64 * 1024, 32, SECT_4K) }, - - { "m25px16", INFO(0x207115, 0, 64 * 1024, 32, SECT_4K) }, - { "m25px32", INFO(0x207116, 0, 64 * 1024, 64, SECT_4K) }, - { "m25px32-s0", INFO(0x207316, 0, 64 * 1024, 64, SECT_4K) }, - { "m25px32-s1", INFO(0x206316, 0, 64 * 1024, 64, SECT_4K) }, - { "m25px64", INFO(0x207117, 0, 64 * 1024, 128, 0) }, - - /* Winbond -- w25x "blocks" are 64K, "sectors" are 4KiB */ - { "w25x10", INFO(0xef3011, 0, 64 * 1024, 2, SECT_4K) }, - { "w25x20", INFO(0xef3012, 0, 64 * 1024, 4, SECT_4K) }, - { "w25x40", INFO(0xef3013, 0, 64 * 1024, 8, SECT_4K) }, - { "w25x80", INFO(0xef3014, 0, 64 * 1024, 16, SECT_4K) }, - { "w25x16", INFO(0xef3015, 0, 64 * 1024, 32, SECT_4K) }, - { "w25x32", INFO(0xef3016, 0, 64 * 1024, 64, SECT_4K) }, - { "w25q32", INFO(0xef4016, 0, 64 * 1024, 64, SECT_4K) }, - { "w25q32dw", INFO(0xef6016, 0, 64 * 1024, 64, SECT_4K) }, - { "w25x64", INFO(0xef3017, 0, 64 * 1024, 128, SECT_4K) }, - { "w25q64", INFO(0xef4017, 0, 64 * 1024, 128, SECT_4K) }, - { "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) }, - { "w25q80", INFO(0xef5014, 0, 64 * 1024, 16, SECT_4K) }, - { "w25q80bl", INFO(0xef4014, 0, 64 * 1024, 16, SECT_4K) }, - { "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) }, - { "w25q256", INFO(0xef4019, 0, 64 * 1024, 512, SECT_4K) }, - - /* Catalyst / On Semiconductor -- non-JEDEC */ - { "cat25c11", CAT25_INFO( 16, 8, 16, 1, M25P_NO_ERASE | M25P_NO_FR) }, - { "cat25c03", CAT25_INFO( 32, 8, 16, 2, M25P_NO_ERASE | M25P_NO_FR) }, - { "cat25c09", CAT25_INFO( 128, 8, 32, 2, M25P_NO_ERASE | M25P_NO_FR) }, - { "cat25c17", CAT25_INFO( 256, 8, 32, 2, M25P_NO_ERASE | M25P_NO_FR) }, - { "cat25128", CAT25_INFO(2048, 8, 64, 2, M25P_NO_ERASE | M25P_NO_FR) }, - { }, -}; -MODULE_DEVICE_TABLE(spi, m25p_ids); - -static const struct spi_device_id *jedec_probe(struct spi_device *spi) -{ - int tmp; - u8 code = OPCODE_RDID; - u8 id[5]; - u32 jedec; - u16 ext_jedec; - struct flash_info *info; + return ret; - /* JEDEC also defines an optional "extended device information" - * string for after vendor-specific data, after the three bytes - * we use here. Supporting some chips might require using it. - */ - tmp = spi_write_then_read(spi, &code, 1, id, 5); - if (tmp < 0) { - pr_debug("%s: error %d reading JEDEC ID\n", - dev_name(&spi->dev), tmp); - return ERR_PTR(tmp); - } - jedec = id[0]; - jedec = jedec << 8; - jedec |= id[1]; - jedec = jedec << 8; - jedec |= id[2]; + /* Set up command buffer. */ + flash->command[0] = nor->erase_opcode; + m25p_addr2cmd(nor, offset, flash->command); - ext_jedec = id[3] << 8 | id[4]; + spi_write(flash->spi, flash->command, m25p_cmdsz(nor)); - for (tmp = 0; tmp < ARRAY_SIZE(m25p_ids) - 1; tmp++) { - info = (void *)m25p_ids[tmp].driver_data; - if (info->jedec_id == jedec) { - if (info->ext_id == 0 || info->ext_id == ext_jedec) - return &m25p_ids[tmp]; - } - } - dev_err(&spi->dev, "unrecognized JEDEC id %06x\n", jedec); - return ERR_PTR(-ENODEV); + return 0; } - /* * board specific setup should have ensured the SPI clock used here * matches what the READ command supports, at least until this driver @@ -1096,231 +191,45 @@ static const struct spi_device_id *jedec_probe(struct spi_device *spi) */ static int m25p_probe(struct spi_device *spi) { - const struct spi_device_id *id = spi_get_device_id(spi); - struct flash_platform_data *data; - struct m25p *flash; - struct flash_info *info; - unsigned i; struct mtd_part_parser_data ppdata; - struct device_node *np = spi->dev.of_node; + struct flash_platform_data *data; + struct m25p *flash; + struct spi_nor *nor; + enum read_mode mode = SPI_NOR_NORMAL; int ret; - /* Platform data helps sort out which chip type we have, as - * well as how this board partitions it. If we don't have - * a chip ID, try the JEDEC id commands; they'll work for most - * newer chips, even if we don't recognize the particular chip. - */ - data = dev_get_platdata(&spi->dev); - if (data && data->type) { - const struct spi_device_id *plat_id; - - for (i = 0; i < ARRAY_SIZE(m25p_ids) - 1; i++) { - plat_id = &m25p_ids[i]; - if (strcmp(data->type, plat_id->name)) - continue; - break; - } - - if (i < ARRAY_SIZE(m25p_ids) - 1) - id = plat_id; - else - dev_warn(&spi->dev, "unrecognized id %s\n", data->type); - } - - info = (void *)id->driver_data; - - if (info->jedec_id) { - const struct spi_device_id *jid; - - jid = jedec_probe(spi); - if (IS_ERR(jid)) { - return PTR_ERR(jid); - } else if (jid != id) { - /* - * JEDEC knows better, so overwrite platform ID. We - * can't trust partitions any longer, but we'll let - * mtd apply them anyway, since some partitions may be - * marked read-only, and we don't want to lose that - * information, even if it's not 100% accurate. - */ - dev_warn(&spi->dev, "found %s, expected %s\n", - jid->name, id->name); - id = jid; - info = (void *)jid->driver_data; - } - } - flash = devm_kzalloc(&spi->dev, sizeof(*flash), GFP_KERNEL); if (!flash) return -ENOMEM; - flash->command = devm_kzalloc(&spi->dev, MAX_CMD_SIZE, GFP_KERNEL); - if (!flash->command) - return -ENOMEM; - - flash->spi = spi; - mutex_init(&flash->lock); - spi_set_drvdata(spi, flash); - - /* - * Atmel, SST and Intel/Numonyx serial flash tend to power - * up with the software protection bits set - */ + nor = &flash->spi_nor; - if (JEDEC_MFR(info->jedec_id) == CFI_MFR_ATMEL || - JEDEC_MFR(info->jedec_id) == CFI_MFR_INTEL || - JEDEC_MFR(info->jedec_id) == CFI_MFR_SST) { - write_enable(flash); - write_sr(flash, 0); - } - - if (data && data->name) - flash->mtd.name = data->name; - else - flash->mtd.name = dev_name(&spi->dev); - - flash->mtd.type = MTD_NORFLASH; - flash->mtd.writesize = 1; - flash->mtd.flags = MTD_CAP_NORFLASH; - flash->mtd.size = info->sector_size * info->n_sectors; - flash->mtd._erase = m25p80_erase; - flash->mtd._read = m25p80_read; - - /* flash protection support for STmicro chips */ - if (JEDEC_MFR(info->jedec_id) == CFI_MFR_ST) { - flash->mtd._lock = m25p80_lock; - flash->mtd._unlock = m25p80_unlock; - } + /* install the hooks */ + nor->read = m25p80_read; + nor->write = m25p80_write; + nor->erase = m25p80_erase; + nor->write_reg = m25p80_write_reg; + nor->read_reg = m25p80_read_reg; - /* sst flash chips use AAI word program */ - if (info->flags & SST_WRITE) - flash->mtd._write = sst_write; - else - flash->mtd._write = m25p80_write; + nor->dev = &spi->dev; + nor->mtd = &flash->mtd; + nor->priv = flash; - /* prefer "small sector" erase if possible */ - if (info->flags & SECT_4K) { - flash->erase_opcode = OPCODE_BE_4K; - flash->mtd.erasesize = 4096; - } else if (info->flags & SECT_4K_PMC) { - flash->erase_opcode = OPCODE_BE_4K_PMC; - flash->mtd.erasesize = 4096; - } else { - flash->erase_opcode = OPCODE_SE; - flash->mtd.erasesize = info->sector_size; - } + spi_set_drvdata(spi, flash); + flash->mtd.priv = nor; + flash->spi = spi; - if (info->flags & M25P_NO_ERASE) - flash->mtd.flags |= MTD_NO_ERASE; + if (spi->mode & SPI_RX_QUAD) + mode = SPI_NOR_QUAD; + else if (spi->mode & SPI_RX_DUAL) + mode = SPI_NOR_DUAL; + ret = spi_nor_scan(nor, spi_get_device_id(spi), mode); + if (ret) + return ret; + data = dev_get_platdata(&spi->dev); ppdata.of_node = spi->dev.of_node; - flash->mtd.dev.parent = &spi->dev; - flash->page_size = info->page_size; - flash->mtd.writebufsize = flash->page_size; - - if (np) { - /* If we were instantiated by DT, use it */ - if (of_property_read_bool(np, "m25p,fast-read")) - flash->flash_read = M25P80_FAST; - else - flash->flash_read = M25P80_NORMAL; - } else { - /* If we weren't instantiated by DT, default to fast-read */ - flash->flash_read = M25P80_FAST; - } - - /* Some devices cannot do fast-read, no matter what DT tells us */ - if (info->flags & M25P_NO_FR) - flash->flash_read = M25P80_NORMAL; - - /* Quad/Dual-read mode takes precedence over fast/normal */ - if (spi->mode & SPI_RX_QUAD && info->flags & M25P80_QUAD_READ) { - ret = set_quad_mode(flash, info->jedec_id); - if (ret) { - dev_err(&flash->spi->dev, "quad mode not supported\n"); - return ret; - } - flash->flash_read = M25P80_QUAD; - } else if (spi->mode & SPI_RX_DUAL && info->flags & M25P80_DUAL_READ) { - flash->flash_read = M25P80_DUAL; - } - /* Default commands */ - switch (flash->flash_read) { - case M25P80_QUAD: - flash->read_opcode = OPCODE_QUAD_READ; - break; - case M25P80_DUAL: - flash->read_opcode = OPCODE_DUAL_READ; - break; - case M25P80_FAST: - flash->read_opcode = OPCODE_FAST_READ; - break; - case M25P80_NORMAL: - flash->read_opcode = OPCODE_NORM_READ; - break; - default: - dev_err(&flash->spi->dev, "No Read opcode defined\n"); - return -EINVAL; - } - - flash->program_opcode = OPCODE_PP; - - if (info->addr_width) - flash->addr_width = info->addr_width; - else if (flash->mtd.size > 0x1000000) { - /* enable 4-byte addressing if the device exceeds 16MiB */ - flash->addr_width = 4; - if (JEDEC_MFR(info->jedec_id) == CFI_MFR_AMD) { - /* Dedicated 4-byte command set */ - switch (flash->flash_read) { - case M25P80_QUAD: - flash->read_opcode = OPCODE_QUAD_READ_4B; - break; - case M25P80_DUAL: - flash->read_opcode = OPCODE_DUAL_READ_4B; - break; - case M25P80_FAST: - flash->read_opcode = OPCODE_FAST_READ_4B; - break; - case M25P80_NORMAL: - flash->read_opcode = OPCODE_NORM_READ_4B; - break; - } - flash->program_opcode = OPCODE_PP_4B; - /* No small sector erase for 4-byte command set */ - flash->erase_opcode = OPCODE_SE_4B; - flash->mtd.erasesize = info->sector_size; - } else - set_4byte(flash, info->jedec_id, 1); - } else { - flash->addr_width = 3; - } - - dev_info(&spi->dev, "%s (%lld Kbytes)\n", id->name, - (long long)flash->mtd.size >> 10); - - pr_debug("mtd .name = %s, .size = 0x%llx (%lldMiB) " - ".erasesize = 0x%.8x (%uKiB) .numeraseregions = %d\n", - flash->mtd.name, - (long long)flash->mtd.size, (long long)(flash->mtd.size >> 20), - flash->mtd.erasesize, flash->mtd.erasesize / 1024, - flash->mtd.numeraseregions); - - if (flash->mtd.numeraseregions) - for (i = 0; i < flash->mtd.numeraseregions; i++) - pr_debug("mtd.eraseregions[%d] = { .offset = 0x%llx, " - ".erasesize = 0x%.8x (%uKiB), " - ".numblocks = %d }\n", - i, (long long)flash->mtd.eraseregions[i].offset, - flash->mtd.eraseregions[i].erasesize, - flash->mtd.eraseregions[i].erasesize / 1024, - flash->mtd.eraseregions[i].numblocks); - - - /* partitions should match sector boundaries; and it may be good to - * use readonly partitions for writeprotected sectors (BP2..BP0). - */ return mtd_device_parse_register(&flash->mtd, NULL, &ppdata, data ? data->parts : NULL, data ? data->nr_parts : 0); @@ -1341,7 +250,7 @@ static struct spi_driver m25p80_driver = { .name = "m25p80", .owner = THIS_MODULE, }, - .id_table = m25p_ids, + .id_table = spi_nor_ids, .probe = m25p_probe, .remove = m25p_remove, diff --git a/drivers/mtd/devices/serial_flash_cmds.h b/drivers/mtd/devices/serial_flash_cmds.h index 4f0c2c7c898e..f59a125295d0 100644 --- a/drivers/mtd/devices/serial_flash_cmds.h +++ b/drivers/mtd/devices/serial_flash_cmds.h @@ -13,43 +13,23 @@ #define _MTD_SERIAL_FLASH_CMDS_H /* Generic Flash Commands/OPCODEs */ -#define FLASH_CMD_WREN 0x06 -#define FLASH_CMD_WRDI 0x04 -#define FLASH_CMD_RDID 0x9f -#define FLASH_CMD_RDSR 0x05 -#define FLASH_CMD_RDSR2 0x35 -#define FLASH_CMD_WRSR 0x01 -#define FLASH_CMD_SE_4K 0x20 -#define FLASH_CMD_SE_32K 0x52 -#define FLASH_CMD_SE 0xd8 -#define FLASH_CMD_CHIPERASE 0xc7 -#define FLASH_CMD_WRVCR 0x81 -#define FLASH_CMD_RDVCR 0x85 +#define SPINOR_OP_RDSR2 0x35 +#define SPINOR_OP_WRVCR 0x81 +#define SPINOR_OP_RDVCR 0x85 /* JEDEC Standard - Serial Flash Discoverable Parmeters (SFDP) Commands */ -#define FLASH_CMD_READ 0x03 /* READ */ -#define FLASH_CMD_READ_FAST 0x0b /* FAST READ */ -#define FLASH_CMD_READ_1_1_2 0x3b /* DUAL OUTPUT READ */ -#define FLASH_CMD_READ_1_2_2 0xbb /* DUAL I/O READ */ -#define FLASH_CMD_READ_1_1_4 0x6b /* QUAD OUTPUT READ */ -#define FLASH_CMD_READ_1_4_4 0xeb /* QUAD I/O READ */ +#define SPINOR_OP_READ_1_2_2 0xbb /* DUAL I/O READ */ +#define SPINOR_OP_READ_1_4_4 0xeb /* QUAD I/O READ */ -#define FLASH_CMD_WRITE 0x02 /* PAGE PROGRAM */ -#define FLASH_CMD_WRITE_1_1_2 0xa2 /* DUAL INPUT PROGRAM */ -#define FLASH_CMD_WRITE_1_2_2 0xd2 /* DUAL INPUT EXT PROGRAM */ -#define FLASH_CMD_WRITE_1_1_4 0x32 /* QUAD INPUT PROGRAM */ -#define FLASH_CMD_WRITE_1_4_4 0x12 /* QUAD INPUT EXT PROGRAM */ - -#define FLASH_CMD_EN4B_ADDR 0xb7 /* Enter 4-byte address mode */ -#define FLASH_CMD_EX4B_ADDR 0xe9 /* Exit 4-byte address mode */ +#define SPINOR_OP_WRITE 0x02 /* PAGE PROGRAM */ +#define SPINOR_OP_WRITE_1_1_2 0xa2 /* DUAL INPUT PROGRAM */ +#define SPINOR_OP_WRITE_1_2_2 0xd2 /* DUAL INPUT EXT PROGRAM */ +#define SPINOR_OP_WRITE_1_1_4 0x32 /* QUAD INPUT PROGRAM */ +#define SPINOR_OP_WRITE_1_4_4 0x12 /* QUAD INPUT EXT PROGRAM */ /* READ commands with 32-bit addressing */ -#define FLASH_CMD_READ4 0x13 -#define FLASH_CMD_READ4_FAST 0x0c -#define FLASH_CMD_READ4_1_1_2 0x3c -#define FLASH_CMD_READ4_1_2_2 0xbc -#define FLASH_CMD_READ4_1_1_4 0x6c -#define FLASH_CMD_READ4_1_4_4 0xec +#define SPINOR_OP_READ4_1_2_2 0xbc +#define SPINOR_OP_READ4_1_4_4 0xec /* Configuration flags */ #define FLASH_FLAG_SINGLE 0x000000ff diff --git a/drivers/mtd/devices/slram.c b/drivers/mtd/devices/slram.c index 5a5cd2ace4a6..2fc4957cbe7f 100644 --- a/drivers/mtd/devices/slram.c +++ b/drivers/mtd/devices/slram.c @@ -280,14 +280,11 @@ __setup("slram=", mtd_slram_setup); static int __init init_slram(void) { char *devname; - int i; #ifndef MODULE char *devstart; char *devlength; - i = 0; - if (!map) { E("slram: not enough parameters.\n"); return(-EINVAL); @@ -314,6 +311,7 @@ static int __init init_slram(void) } #else int count; + int i; for (count = 0; count < SLRAM_MAX_DEVICES_PARAMS && map[count]; count++) { diff --git a/drivers/mtd/devices/st_spi_fsm.c b/drivers/mtd/devices/st_spi_fsm.c index 1957d7c8e185..d252514d3e98 100644 --- a/drivers/mtd/devices/st_spi_fsm.c +++ b/drivers/mtd/devices/st_spi_fsm.c @@ -19,6 +19,7 @@ #include <linux/mfd/syscon.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> +#include <linux/mtd/spi-nor.h> #include <linux/sched.h> #include <linux/delay.h> #include <linux/io.h> @@ -201,44 +202,6 @@ #define STFSM_MAX_WAIT_SEQ_MS 1000 /* FSM execution time */ -/* Flash Commands */ -#define FLASH_CMD_WREN 0x06 -#define FLASH_CMD_WRDI 0x04 -#define FLASH_CMD_RDID 0x9f -#define FLASH_CMD_RDSR 0x05 -#define FLASH_CMD_RDSR2 0x35 -#define FLASH_CMD_WRSR 0x01 -#define FLASH_CMD_SE_4K 0x20 -#define FLASH_CMD_SE_32K 0x52 -#define FLASH_CMD_SE 0xd8 -#define FLASH_CMD_CHIPERASE 0xc7 -#define FLASH_CMD_WRVCR 0x81 -#define FLASH_CMD_RDVCR 0x85 - -#define FLASH_CMD_READ 0x03 /* READ */ -#define FLASH_CMD_READ_FAST 0x0b /* FAST READ */ -#define FLASH_CMD_READ_1_1_2 0x3b /* DUAL OUTPUT READ */ -#define FLASH_CMD_READ_1_2_2 0xbb /* DUAL I/O READ */ -#define FLASH_CMD_READ_1_1_4 0x6b /* QUAD OUTPUT READ */ -#define FLASH_CMD_READ_1_4_4 0xeb /* QUAD I/O READ */ - -#define FLASH_CMD_WRITE 0x02 /* PAGE PROGRAM */ -#define FLASH_CMD_WRITE_1_1_2 0xa2 /* DUAL INPUT PROGRAM */ -#define FLASH_CMD_WRITE_1_2_2 0xd2 /* DUAL INPUT EXT PROGRAM */ -#define FLASH_CMD_WRITE_1_1_4 0x32 /* QUAD INPUT PROGRAM */ -#define FLASH_CMD_WRITE_1_4_4 0x12 /* QUAD INPUT EXT PROGRAM */ - -#define FLASH_CMD_EN4B_ADDR 0xb7 /* Enter 4-byte address mode */ -#define FLASH_CMD_EX4B_ADDR 0xe9 /* Exit 4-byte address mode */ - -/* READ commands with 32-bit addressing (N25Q256 and S25FLxxxS) */ -#define FLASH_CMD_READ4 0x13 -#define FLASH_CMD_READ4_FAST 0x0c -#define FLASH_CMD_READ4_1_1_2 0x3c -#define FLASH_CMD_READ4_1_2_2 0xbc -#define FLASH_CMD_READ4_1_1_4 0x6c -#define FLASH_CMD_READ4_1_4_4 0xec - /* S25FLxxxS commands */ #define S25FL_CMD_WRITE4_1_1_4 0x34 #define S25FL_CMD_SE4 0xdc @@ -246,7 +209,7 @@ #define S25FL_CMD_DYBWR 0xe1 #define S25FL_CMD_DYBRD 0xe0 #define S25FL_CMD_WRITE4 0x12 /* Note, opcode clashes with - * 'FLASH_CMD_WRITE_1_4_4' + * 'SPINOR_OP_WRITE_1_4_4' * as found on N25Qxxx devices! */ /* Status register */ @@ -261,6 +224,12 @@ #define S25FL_STATUS_E_ERR 0x20 #define S25FL_STATUS_P_ERR 0x40 +#define N25Q_CMD_WRVCR 0x81 +#define N25Q_CMD_RDVCR 0x85 +#define N25Q_CMD_RDVECR 0x65 +#define N25Q_CMD_RDNVCR 0xb5 +#define N25Q_CMD_WRNVCR 0xb1 + #define FLASH_PAGESIZE 256 /* In Bytes */ #define FLASH_PAGESIZE_32 (FLASH_PAGESIZE / 4) /* In uint32_t */ #define FLASH_MAX_BUSY_WAIT (300 * HZ) /* Maximum 'CHIPERASE' time */ @@ -270,7 +239,6 @@ */ #define CFG_READ_TOGGLE_32BIT_ADDR 0x00000001 #define CFG_WRITE_TOGGLE_32BIT_ADDR 0x00000002 -#define CFG_WRITE_EX_32BIT_ADDR_DELAY 0x00000004 #define CFG_ERASESEC_TOGGLE_32BIT_ADDR 0x00000008 #define CFG_S25FL_CHECK_ERROR_FLAGS 0x00000010 @@ -329,7 +297,7 @@ struct flash_info { u32 jedec_id; u16 ext_id; /* - * The size listed here is what works with FLASH_CMD_SE, which isn't + * The size listed here is what works with SPINOR_OP_SE, which isn't * necessarily called a "sector" by the vendor. */ unsigned sector_size; @@ -369,17 +337,26 @@ static struct flash_info flash_types[] = { { "m25px32", 0x207116, 0, 64 * 1024, 64, M25PX_FLAG, 75, NULL }, { "m25px64", 0x207117, 0, 64 * 1024, 128, M25PX_FLAG, 75, NULL }, + /* Macronix MX25xxx + * - Support for 'FLASH_FLAG_WRITE_1_4_4' is omitted for devices + * where operating frequency must be reduced. + */ #define MX25_FLAG (FLASH_FLAG_READ_WRITE | \ FLASH_FLAG_READ_FAST | \ FLASH_FLAG_READ_1_1_2 | \ FLASH_FLAG_READ_1_2_2 | \ FLASH_FLAG_READ_1_1_4 | \ - FLASH_FLAG_READ_1_4_4 | \ FLASH_FLAG_SE_4K | \ FLASH_FLAG_SE_32K) + { "mx25l3255e", 0xc29e16, 0, 64 * 1024, 64, + (MX25_FLAG | FLASH_FLAG_WRITE_1_4_4), 86, + stfsm_mx25_config}, { "mx25l25635e", 0xc22019, 0, 64*1024, 512, (MX25_FLAG | FLASH_FLAG_32BIT_ADDR | FLASH_FLAG_RESET), 70, stfsm_mx25_config }, + { "mx25l25655e", 0xc22619, 0, 64*1024, 512, + (MX25_FLAG | FLASH_FLAG_32BIT_ADDR | FLASH_FLAG_RESET), 70, + stfsm_mx25_config}, #define N25Q_FLAG (FLASH_FLAG_READ_WRITE | \ FLASH_FLAG_READ_FAST | \ @@ -407,6 +384,8 @@ static struct flash_info flash_types[] = { FLASH_FLAG_READ_1_4_4 | \ FLASH_FLAG_WRITE_1_1_4 | \ FLASH_FLAG_READ_FAST) + { "s25fl032p", 0x010215, 0x4d00, 64 * 1024, 64, S25FLXXXP_FLAG, 80, + stfsm_s25fl_config}, { "s25fl129p0", 0x012018, 0x4d00, 256 * 1024, 64, S25FLXXXP_FLAG, 80, stfsm_s25fl_config }, { "s25fl129p1", 0x012018, 0x4d01, 64 * 1024, 256, S25FLXXXP_FLAG, 80, @@ -473,22 +452,22 @@ static struct flash_info flash_types[] = { /* Default READ configurations, in order of preference */ static struct seq_rw_config default_read_configs[] = { - {FLASH_FLAG_READ_1_4_4, FLASH_CMD_READ_1_4_4, 0, 4, 4, 0x00, 2, 4}, - {FLASH_FLAG_READ_1_1_4, FLASH_CMD_READ_1_1_4, 0, 1, 4, 0x00, 4, 0}, - {FLASH_FLAG_READ_1_2_2, FLASH_CMD_READ_1_2_2, 0, 2, 2, 0x00, 4, 0}, - {FLASH_FLAG_READ_1_1_2, FLASH_CMD_READ_1_1_2, 0, 1, 2, 0x00, 0, 8}, - {FLASH_FLAG_READ_FAST, FLASH_CMD_READ_FAST, 0, 1, 1, 0x00, 0, 8}, - {FLASH_FLAG_READ_WRITE, FLASH_CMD_READ, 0, 1, 1, 0x00, 0, 0}, + {FLASH_FLAG_READ_1_4_4, SPINOR_OP_READ_1_4_4, 0, 4, 4, 0x00, 2, 4}, + {FLASH_FLAG_READ_1_1_4, SPINOR_OP_READ_1_1_4, 0, 1, 4, 0x00, 4, 0}, + {FLASH_FLAG_READ_1_2_2, SPINOR_OP_READ_1_2_2, 0, 2, 2, 0x00, 4, 0}, + {FLASH_FLAG_READ_1_1_2, SPINOR_OP_READ_1_1_2, 0, 1, 2, 0x00, 0, 8}, + {FLASH_FLAG_READ_FAST, SPINOR_OP_READ_FAST, 0, 1, 1, 0x00, 0, 8}, + {FLASH_FLAG_READ_WRITE, SPINOR_OP_READ, 0, 1, 1, 0x00, 0, 0}, {0x00, 0, 0, 0, 0, 0x00, 0, 0}, }; /* Default WRITE configurations */ static struct seq_rw_config default_write_configs[] = { - {FLASH_FLAG_WRITE_1_4_4, FLASH_CMD_WRITE_1_4_4, 1, 4, 4, 0x00, 0, 0}, - {FLASH_FLAG_WRITE_1_1_4, FLASH_CMD_WRITE_1_1_4, 1, 1, 4, 0x00, 0, 0}, - {FLASH_FLAG_WRITE_1_2_2, FLASH_CMD_WRITE_1_2_2, 1, 2, 2, 0x00, 0, 0}, - {FLASH_FLAG_WRITE_1_1_2, FLASH_CMD_WRITE_1_1_2, 1, 1, 2, 0x00, 0, 0}, - {FLASH_FLAG_READ_WRITE, FLASH_CMD_WRITE, 1, 1, 1, 0x00, 0, 0}, + {FLASH_FLAG_WRITE_1_4_4, SPINOR_OP_WRITE_1_4_4, 1, 4, 4, 0x00, 0, 0}, + {FLASH_FLAG_WRITE_1_1_4, SPINOR_OP_WRITE_1_1_4, 1, 1, 4, 0x00, 0, 0}, + {FLASH_FLAG_WRITE_1_2_2, SPINOR_OP_WRITE_1_2_2, 1, 2, 2, 0x00, 0, 0}, + {FLASH_FLAG_WRITE_1_1_2, SPINOR_OP_WRITE_1_1_2, 1, 1, 2, 0x00, 0, 0}, + {FLASH_FLAG_READ_WRITE, SPINOR_OP_WRITE, 1, 1, 1, 0x00, 0, 0}, {0x00, 0, 0, 0, 0, 0x00, 0, 0}, }; @@ -511,12 +490,12 @@ static struct seq_rw_config default_write_configs[] = { * cycles. */ static struct seq_rw_config n25q_read3_configs[] = { - {FLASH_FLAG_READ_1_4_4, FLASH_CMD_READ_1_4_4, 0, 4, 4, 0x00, 0, 8}, - {FLASH_FLAG_READ_1_1_4, FLASH_CMD_READ_1_1_4, 0, 1, 4, 0x00, 0, 8}, - {FLASH_FLAG_READ_1_2_2, FLASH_CMD_READ_1_2_2, 0, 2, 2, 0x00, 0, 8}, - {FLASH_FLAG_READ_1_1_2, FLASH_CMD_READ_1_1_2, 0, 1, 2, 0x00, 0, 8}, - {FLASH_FLAG_READ_FAST, FLASH_CMD_READ_FAST, 0, 1, 1, 0x00, 0, 8}, - {FLASH_FLAG_READ_WRITE, FLASH_CMD_READ, 0, 1, 1, 0x00, 0, 0}, + {FLASH_FLAG_READ_1_4_4, SPINOR_OP_READ_1_4_4, 0, 4, 4, 0x00, 0, 8}, + {FLASH_FLAG_READ_1_1_4, SPINOR_OP_READ_1_1_4, 0, 1, 4, 0x00, 0, 8}, + {FLASH_FLAG_READ_1_2_2, SPINOR_OP_READ_1_2_2, 0, 2, 2, 0x00, 0, 8}, + {FLASH_FLAG_READ_1_1_2, SPINOR_OP_READ_1_1_2, 0, 1, 2, 0x00, 0, 8}, + {FLASH_FLAG_READ_FAST, SPINOR_OP_READ_FAST, 0, 1, 1, 0x00, 0, 8}, + {FLASH_FLAG_READ_WRITE, SPINOR_OP_READ, 0, 1, 1, 0x00, 0, 0}, {0x00, 0, 0, 0, 0, 0x00, 0, 0}, }; @@ -526,12 +505,12 @@ static struct seq_rw_config n25q_read3_configs[] = { * - 'FAST' variants configured for 8 dummy cycles (see note above.) */ static struct seq_rw_config n25q_read4_configs[] = { - {FLASH_FLAG_READ_1_4_4, FLASH_CMD_READ4_1_4_4, 0, 4, 4, 0x00, 0, 8}, - {FLASH_FLAG_READ_1_1_4, FLASH_CMD_READ4_1_1_4, 0, 1, 4, 0x00, 0, 8}, - {FLASH_FLAG_READ_1_2_2, FLASH_CMD_READ4_1_2_2, 0, 2, 2, 0x00, 0, 8}, - {FLASH_FLAG_READ_1_1_2, FLASH_CMD_READ4_1_1_2, 0, 1, 2, 0x00, 0, 8}, - {FLASH_FLAG_READ_FAST, FLASH_CMD_READ4_FAST, 0, 1, 1, 0x00, 0, 8}, - {FLASH_FLAG_READ_WRITE, FLASH_CMD_READ4, 0, 1, 1, 0x00, 0, 0}, + {FLASH_FLAG_READ_1_4_4, SPINOR_OP_READ4_1_4_4, 0, 4, 4, 0x00, 0, 8}, + {FLASH_FLAG_READ_1_1_4, SPINOR_OP_READ4_1_1_4, 0, 1, 4, 0x00, 0, 8}, + {FLASH_FLAG_READ_1_2_2, SPINOR_OP_READ4_1_2_2, 0, 2, 2, 0x00, 0, 8}, + {FLASH_FLAG_READ_1_1_2, SPINOR_OP_READ4_1_1_2, 0, 1, 2, 0x00, 0, 8}, + {FLASH_FLAG_READ_FAST, SPINOR_OP_READ4_FAST, 0, 1, 1, 0x00, 0, 8}, + {FLASH_FLAG_READ_WRITE, SPINOR_OP_READ4, 0, 1, 1, 0x00, 0, 0}, {0x00, 0, 0, 0, 0, 0x00, 0, 0}, }; @@ -544,7 +523,7 @@ static int stfsm_mx25_en_32bit_addr_seq(struct stfsm_seq *seq) { seq->seq_opc[0] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) | - SEQ_OPC_OPCODE(FLASH_CMD_EN4B_ADDR) | + SEQ_OPC_OPCODE(SPINOR_OP_EN4B) | SEQ_OPC_CSDEASSERT); seq->seq[0] = STFSM_INST_CMD1; @@ -572,12 +551,12 @@ static int stfsm_mx25_en_32bit_addr_seq(struct stfsm_seq *seq) * entering a state that is incompatible with the SPIBoot Controller. */ static struct seq_rw_config stfsm_s25fl_read4_configs[] = { - {FLASH_FLAG_READ_1_4_4, FLASH_CMD_READ4_1_4_4, 0, 4, 4, 0x00, 2, 4}, - {FLASH_FLAG_READ_1_1_4, FLASH_CMD_READ4_1_1_4, 0, 1, 4, 0x00, 0, 8}, - {FLASH_FLAG_READ_1_2_2, FLASH_CMD_READ4_1_2_2, 0, 2, 2, 0x00, 4, 0}, - {FLASH_FLAG_READ_1_1_2, FLASH_CMD_READ4_1_1_2, 0, 1, 2, 0x00, 0, 8}, - {FLASH_FLAG_READ_FAST, FLASH_CMD_READ4_FAST, 0, 1, 1, 0x00, 0, 8}, - {FLASH_FLAG_READ_WRITE, FLASH_CMD_READ4, 0, 1, 1, 0x00, 0, 0}, + {FLASH_FLAG_READ_1_4_4, SPINOR_OP_READ4_1_4_4, 0, 4, 4, 0x00, 2, 4}, + {FLASH_FLAG_READ_1_1_4, SPINOR_OP_READ4_1_1_4, 0, 1, 4, 0x00, 0, 8}, + {FLASH_FLAG_READ_1_2_2, SPINOR_OP_READ4_1_2_2, 0, 2, 2, 0x00, 4, 0}, + {FLASH_FLAG_READ_1_1_2, SPINOR_OP_READ4_1_1_2, 0, 1, 2, 0x00, 0, 8}, + {FLASH_FLAG_READ_FAST, SPINOR_OP_READ4_FAST, 0, 1, 1, 0x00, 0, 8}, + {FLASH_FLAG_READ_WRITE, SPINOR_OP_READ4, 0, 1, 1, 0x00, 0, 0}, {0x00, 0, 0, 0, 0, 0x00, 0, 0}, }; @@ -590,13 +569,13 @@ static struct seq_rw_config stfsm_s25fl_write4_configs[] = { /* * [W25Qxxx] Configuration */ -#define W25Q_STATUS_QE (0x1 << 9) +#define W25Q_STATUS_QE (0x1 << 1) static struct stfsm_seq stfsm_seq_read_jedec = { .data_size = TRANSFER_SIZE(8), .seq_opc[0] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) | - SEQ_OPC_OPCODE(FLASH_CMD_RDID)), + SEQ_OPC_OPCODE(SPINOR_OP_RDID)), .seq = { STFSM_INST_CMD1, STFSM_INST_DATA_READ, @@ -612,7 +591,7 @@ static struct stfsm_seq stfsm_seq_read_status_fifo = { .data_size = TRANSFER_SIZE(4), .seq_opc[0] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) | - SEQ_OPC_OPCODE(FLASH_CMD_RDSR)), + SEQ_OPC_OPCODE(SPINOR_OP_RDSR)), .seq = { STFSM_INST_CMD1, STFSM_INST_DATA_READ, @@ -628,10 +607,10 @@ static struct stfsm_seq stfsm_seq_erase_sector = { /* 'addr_cfg' configured during initialisation */ .seq_opc = { (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) | - SEQ_OPC_OPCODE(FLASH_CMD_WREN) | SEQ_OPC_CSDEASSERT), + SEQ_OPC_OPCODE(SPINOR_OP_WREN) | SEQ_OPC_CSDEASSERT), (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) | - SEQ_OPC_OPCODE(FLASH_CMD_SE)), + SEQ_OPC_OPCODE(SPINOR_OP_SE)), }, .seq = { STFSM_INST_CMD1, @@ -649,10 +628,10 @@ static struct stfsm_seq stfsm_seq_erase_sector = { static struct stfsm_seq stfsm_seq_erase_chip = { .seq_opc = { (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) | - SEQ_OPC_OPCODE(FLASH_CMD_WREN) | SEQ_OPC_CSDEASSERT), + SEQ_OPC_OPCODE(SPINOR_OP_WREN) | SEQ_OPC_CSDEASSERT), (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) | - SEQ_OPC_OPCODE(FLASH_CMD_CHIPERASE) | SEQ_OPC_CSDEASSERT), + SEQ_OPC_OPCODE(SPINOR_OP_CHIP_ERASE) | SEQ_OPC_CSDEASSERT), }, .seq = { STFSM_INST_CMD1, @@ -669,26 +648,9 @@ static struct stfsm_seq stfsm_seq_erase_chip = { static struct stfsm_seq stfsm_seq_write_status = { .seq_opc[0] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) | - SEQ_OPC_OPCODE(FLASH_CMD_WREN) | SEQ_OPC_CSDEASSERT), - .seq_opc[1] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) | - SEQ_OPC_OPCODE(FLASH_CMD_WRSR)), - .seq = { - STFSM_INST_CMD1, - STFSM_INST_CMD2, - STFSM_INST_STA_WR1, - STFSM_INST_STOP, - }, - .seq_cfg = (SEQ_CFG_PADS_1 | - SEQ_CFG_READNOTWRITE | - SEQ_CFG_CSDEASSERT | - SEQ_CFG_STARTSEQ), -}; - -static struct stfsm_seq stfsm_seq_wrvcr = { - .seq_opc[0] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) | - SEQ_OPC_OPCODE(FLASH_CMD_WREN) | SEQ_OPC_CSDEASSERT), + SEQ_OPC_OPCODE(SPINOR_OP_WREN) | SEQ_OPC_CSDEASSERT), .seq_opc[1] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) | - SEQ_OPC_OPCODE(FLASH_CMD_WRVCR)), + SEQ_OPC_OPCODE(SPINOR_OP_WRSR)), .seq = { STFSM_INST_CMD1, STFSM_INST_CMD2, @@ -704,9 +666,9 @@ static struct stfsm_seq stfsm_seq_wrvcr = { static int stfsm_n25q_en_32bit_addr_seq(struct stfsm_seq *seq) { seq->seq_opc[0] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) | - SEQ_OPC_OPCODE(FLASH_CMD_EN4B_ADDR)); + SEQ_OPC_OPCODE(SPINOR_OP_EN4B)); seq->seq_opc[1] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) | - SEQ_OPC_OPCODE(FLASH_CMD_WREN) | + SEQ_OPC_OPCODE(SPINOR_OP_WREN) | SEQ_OPC_CSDEASSERT); seq->seq[0] = STFSM_INST_CMD2; @@ -793,7 +755,7 @@ static void stfsm_read_fifo(struct stfsm *fsm, uint32_t *buf, uint32_t size) dev_dbg(fsm->dev, "Reading %d bytes from FIFO\n", size); - BUG_ON((((uint32_t)buf) & 0x3) || (size & 0x3)); + BUG_ON((((uintptr_t)buf) & 0x3) || (size & 0x3)); while (remaining) { for (;;) { @@ -817,7 +779,7 @@ static int stfsm_write_fifo(struct stfsm *fsm, const uint32_t *buf, dev_dbg(fsm->dev, "writing %d bytes to FIFO\n", size); - BUG_ON((((uint32_t)buf) & 0x3) || (size & 0x3)); + BUG_ON((((uintptr_t)buf) & 0x3) || (size & 0x3)); writesl(fsm->base + SPI_FAST_SEQ_DATA_REG, buf, words); @@ -827,7 +789,7 @@ static int stfsm_write_fifo(struct stfsm *fsm, const uint32_t *buf, static int stfsm_enter_32bit_addr(struct stfsm *fsm, int enter) { struct stfsm_seq *seq = &fsm->stfsm_seq_en_32bit_addr; - uint32_t cmd = enter ? FLASH_CMD_EN4B_ADDR : FLASH_CMD_EX4B_ADDR; + uint32_t cmd = enter ? SPINOR_OP_EN4B : SPINOR_OP_EX4B; seq->seq_opc[0] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) | @@ -851,7 +813,7 @@ static uint8_t stfsm_wait_busy(struct stfsm *fsm) /* Use RDRS1 */ seq->seq_opc[0] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) | - SEQ_OPC_OPCODE(FLASH_CMD_RDSR)); + SEQ_OPC_OPCODE(SPINOR_OP_RDSR)); /* Load read_status sequence */ stfsm_load_seq(fsm, seq); @@ -889,60 +851,57 @@ static uint8_t stfsm_wait_busy(struct stfsm *fsm) } static int stfsm_read_status(struct stfsm *fsm, uint8_t cmd, - uint8_t *status) + uint8_t *data, int bytes) { struct stfsm_seq *seq = &stfsm_seq_read_status_fifo; uint32_t tmp; + uint8_t *t = (uint8_t *)&tmp; + int i; - dev_dbg(fsm->dev, "reading STA[%s]\n", - (cmd == FLASH_CMD_RDSR) ? "1" : "2"); + dev_dbg(fsm->dev, "read 'status' register [0x%02x], %d byte(s)\n", + cmd, bytes); - seq->seq_opc[0] = (SEQ_OPC_PADS_1 | - SEQ_OPC_CYCLES(8) | + BUG_ON(bytes != 1 && bytes != 2); + + seq->seq_opc[0] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) | SEQ_OPC_OPCODE(cmd)), stfsm_load_seq(fsm, seq); stfsm_read_fifo(fsm, &tmp, 4); - *status = (uint8_t)(tmp >> 24); + for (i = 0; i < bytes; i++) + data[i] = t[i]; stfsm_wait_seq(fsm); return 0; } -static int stfsm_write_status(struct stfsm *fsm, uint16_t status, - int sta_bytes) +static int stfsm_write_status(struct stfsm *fsm, uint8_t cmd, + uint16_t data, int bytes, int wait_busy) { struct stfsm_seq *seq = &stfsm_seq_write_status; - dev_dbg(fsm->dev, "writing STA[%s] 0x%04x\n", - (sta_bytes == 1) ? "1" : "1+2", status); - - seq->status = (uint32_t)status | STA_PADS_1 | STA_CSDEASSERT; - seq->seq[2] = (sta_bytes == 1) ? - STFSM_INST_STA_WR1 : STFSM_INST_STA_WR1_2; - - stfsm_load_seq(fsm, seq); - - stfsm_wait_seq(fsm); + dev_dbg(fsm->dev, + "write 'status' register [0x%02x], %d byte(s), 0x%04x\n" + " %s wait-busy\n", cmd, bytes, data, wait_busy ? "with" : "no"); - return 0; -}; + BUG_ON(bytes != 1 && bytes != 2); -static int stfsm_wrvcr(struct stfsm *fsm, uint8_t data) -{ - struct stfsm_seq *seq = &stfsm_seq_wrvcr; - - dev_dbg(fsm->dev, "writing VCR 0x%02x\n", data); + seq->seq_opc[1] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) | + SEQ_OPC_OPCODE(cmd)); - seq->status = (STA_DATA_BYTE1(data) | STA_PADS_1 | STA_CSDEASSERT); + seq->status = (uint32_t)data | STA_PADS_1 | STA_CSDEASSERT; + seq->seq[2] = (bytes == 1) ? STFSM_INST_STA_WR1 : STFSM_INST_STA_WR1_2; stfsm_load_seq(fsm, seq); stfsm_wait_seq(fsm); + if (wait_busy) + stfsm_wait_busy(fsm); + return 0; } @@ -1027,7 +986,7 @@ static void stfsm_prepare_rw_seq(struct stfsm *fsm, if (cfg->write) seq->seq_opc[i++] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) | - SEQ_OPC_OPCODE(FLASH_CMD_WREN) | + SEQ_OPC_OPCODE(SPINOR_OP_WREN) | SEQ_OPC_CSDEASSERT); /* Address configuration (24 or 32-bit addresses) */ @@ -1149,31 +1108,36 @@ static int stfsm_mx25_config(struct stfsm *fsm) stfsm_mx25_en_32bit_addr_seq(&fsm->stfsm_seq_en_32bit_addr); soc_reset = stfsm_can_handle_soc_reset(fsm); - if (soc_reset || !fsm->booted_from_spi) { + if (soc_reset || !fsm->booted_from_spi) /* If we can handle SoC resets, we enable 32-bit address * mode pervasively */ stfsm_enter_32bit_addr(fsm, 1); - } else { + else /* Else, enable/disable 32-bit addressing before/after * each operation */ fsm->configuration = (CFG_READ_TOGGLE_32BIT_ADDR | CFG_WRITE_TOGGLE_32BIT_ADDR | CFG_ERASESEC_TOGGLE_32BIT_ADDR); - /* It seems a small delay is required after exiting - * 32-bit mode following a write operation. The issue - * is under investigation. - */ - fsm->configuration |= CFG_WRITE_EX_32BIT_ADDR_DELAY; - } } - /* For QUAD mode, set 'QE' STATUS bit */ + /* Check status of 'QE' bit, update if required. */ + stfsm_read_status(fsm, SPINOR_OP_RDSR, &sta, 1); data_pads = ((fsm->stfsm_seq_read.seq_cfg >> 16) & 0x3) + 1; if (data_pads == 4) { - stfsm_read_status(fsm, FLASH_CMD_RDSR, &sta); - sta |= MX25_STATUS_QE; - stfsm_write_status(fsm, sta, 1); + if (!(sta & MX25_STATUS_QE)) { + /* Set 'QE' */ + sta |= MX25_STATUS_QE; + + stfsm_write_status(fsm, SPINOR_OP_WRSR, sta, 1, 1); + } + } else { + if (sta & MX25_STATUS_QE) { + /* Clear 'QE' */ + sta &= ~MX25_STATUS_QE; + + stfsm_write_status(fsm, SPINOR_OP_WRSR, sta, 1, 1); + } } return 0; @@ -1239,7 +1203,7 @@ static int stfsm_n25q_config(struct stfsm *fsm) */ vcr = (N25Q_VCR_DUMMY_CYCLES(8) | N25Q_VCR_XIP_DISABLED | N25Q_VCR_WRAP_CONT); - stfsm_wrvcr(fsm, vcr); + stfsm_write_status(fsm, N25Q_CMD_WRVCR, vcr, 1, 0); return 0; } @@ -1297,7 +1261,7 @@ static void stfsm_s25fl_write_dyb(struct stfsm *fsm, uint32_t offs, uint8_t dby) { struct stfsm_seq seq = { .seq_opc[0] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) | - SEQ_OPC_OPCODE(FLASH_CMD_WREN) | + SEQ_OPC_OPCODE(SPINOR_OP_WREN) | SEQ_OPC_CSDEASSERT), .seq_opc[1] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) | SEQ_OPC_OPCODE(S25FL_CMD_DYBWR)), @@ -1337,7 +1301,7 @@ static int stfsm_s25fl_clear_status_reg(struct stfsm *fsm) SEQ_OPC_CSDEASSERT), .seq_opc[1] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) | - SEQ_OPC_OPCODE(FLASH_CMD_WRDI) | + SEQ_OPC_OPCODE(SPINOR_OP_WRDI) | SEQ_OPC_CSDEASSERT), .seq = { STFSM_INST_CMD1, @@ -1367,6 +1331,7 @@ static int stfsm_s25fl_config(struct stfsm *fsm) uint32_t offs; uint16_t sta_wr; uint8_t sr1, cr1, dyb; + int update_sr = 0; int ret; if (flags & FLASH_FLAG_32BIT_ADDR) { @@ -1414,34 +1379,28 @@ static int stfsm_s25fl_config(struct stfsm *fsm) } } - /* Check status of 'QE' bit */ + /* Check status of 'QE' bit, update if required. */ + stfsm_read_status(fsm, SPINOR_OP_RDSR2, &cr1, 1); data_pads = ((fsm->stfsm_seq_read.seq_cfg >> 16) & 0x3) + 1; - stfsm_read_status(fsm, FLASH_CMD_RDSR2, &cr1); if (data_pads == 4) { if (!(cr1 & STFSM_S25FL_CONFIG_QE)) { /* Set 'QE' */ cr1 |= STFSM_S25FL_CONFIG_QE; - stfsm_read_status(fsm, FLASH_CMD_RDSR, &sr1); - sta_wr = ((uint16_t)cr1 << 8) | sr1; - - stfsm_write_status(fsm, sta_wr, 2); - - stfsm_wait_busy(fsm); + update_sr = 1; } } else { - if ((cr1 & STFSM_S25FL_CONFIG_QE)) { + if (cr1 & STFSM_S25FL_CONFIG_QE) { /* Clear 'QE' */ cr1 &= ~STFSM_S25FL_CONFIG_QE; - stfsm_read_status(fsm, FLASH_CMD_RDSR, &sr1); - sta_wr = ((uint16_t)cr1 << 8) | sr1; - - stfsm_write_status(fsm, sta_wr, 2); - - stfsm_wait_busy(fsm); + update_sr = 1; } - + } + if (update_sr) { + stfsm_read_status(fsm, SPINOR_OP_RDSR, &sr1, 1); + sta_wr = ((uint16_t)cr1 << 8) | sr1; + stfsm_write_status(fsm, SPINOR_OP_WRSR, sta_wr, 2, 1); } /* @@ -1456,27 +1415,36 @@ static int stfsm_s25fl_config(struct stfsm *fsm) static int stfsm_w25q_config(struct stfsm *fsm) { uint32_t data_pads; - uint16_t sta_wr; - uint8_t sta1, sta2; + uint8_t sr1, sr2; + uint16_t sr_wr; + int update_sr = 0; int ret; ret = stfsm_prepare_rwe_seqs_default(fsm); if (ret) return ret; - /* If using QUAD mode, set QE STATUS bit */ + /* Check status of 'QE' bit, update if required. */ + stfsm_read_status(fsm, SPINOR_OP_RDSR2, &sr2, 1); data_pads = ((fsm->stfsm_seq_read.seq_cfg >> 16) & 0x3) + 1; if (data_pads == 4) { - stfsm_read_status(fsm, FLASH_CMD_RDSR, &sta1); - stfsm_read_status(fsm, FLASH_CMD_RDSR2, &sta2); - - sta_wr = ((uint16_t)sta2 << 8) | sta1; - - sta_wr |= W25Q_STATUS_QE; - - stfsm_write_status(fsm, sta_wr, 2); - - stfsm_wait_busy(fsm); + if (!(sr2 & W25Q_STATUS_QE)) { + /* Set 'QE' */ + sr2 |= W25Q_STATUS_QE; + update_sr = 1; + } + } else { + if (sr2 & W25Q_STATUS_QE) { + /* Clear 'QE' */ + sr2 &= ~W25Q_STATUS_QE; + update_sr = 1; + } + } + if (update_sr) { + /* Write status register */ + stfsm_read_status(fsm, SPINOR_OP_RDSR, &sr1, 1); + sr_wr = ((uint16_t)sr2 << 8) | sr1; + stfsm_write_status(fsm, SPINOR_OP_WRSR, sr_wr, 2, 1); } return 0; @@ -1506,7 +1474,7 @@ static int stfsm_read(struct stfsm *fsm, uint8_t *buf, uint32_t size, read_mask = (data_pads << 2) - 1; /* Handle non-aligned buf */ - p = ((uint32_t)buf & 0x3) ? (uint8_t *)page_buf : buf; + p = ((uintptr_t)buf & 0x3) ? (uint8_t *)page_buf : buf; /* Handle non-aligned size */ size_ub = (size + read_mask) & ~read_mask; @@ -1528,7 +1496,7 @@ static int stfsm_read(struct stfsm *fsm, uint8_t *buf, uint32_t size, } /* Handle non-aligned buf */ - if ((uint32_t)buf & 0x3) + if ((uintptr_t)buf & 0x3) memcpy(buf, page_buf, size); /* Wait for sequence to finish */ @@ -1570,7 +1538,7 @@ static int stfsm_write(struct stfsm *fsm, const uint8_t *buf, write_mask = (data_pads << 2) - 1; /* Handle non-aligned buf */ - if ((uint32_t)buf & 0x3) { + if ((uintptr_t)buf & 0x3) { memcpy(page_buf, buf, size); p = (uint8_t *)page_buf; } else { @@ -1628,11 +1596,8 @@ static int stfsm_write(struct stfsm *fsm, const uint8_t *buf, stfsm_s25fl_clear_status_reg(fsm); /* Exit 32-bit address mode, if required */ - if (fsm->configuration & CFG_WRITE_TOGGLE_32BIT_ADDR) { + if (fsm->configuration & CFG_WRITE_TOGGLE_32BIT_ADDR) stfsm_enter_32bit_addr(fsm, 0); - if (fsm->configuration & CFG_WRITE_EX_32BIT_ADDR_DELAY) - udelay(1); - } return 0; } @@ -1736,7 +1701,7 @@ static int stfsm_mtd_write(struct mtd_info *mtd, loff_t to, size_t len, while (len) { /* Write up to page boundary */ - bytes = min(FLASH_PAGESIZE - page_offs, len); + bytes = min_t(size_t, FLASH_PAGESIZE - page_offs, len); ret = stfsm_write(fsm, b, bytes, to); if (ret) @@ -1935,6 +1900,13 @@ static int stfsm_init(struct stfsm *fsm) fsm->base + SPI_CONFIGDATA); writel(STFSM_DEFAULT_WR_TIME, fsm->base + SPI_STATUS_WR_TIME_REG); + /* + * Set the FSM 'WAIT' delay to the minimum workable value. Note, for + * our purposes, the WAIT instruction is used purely to achieve + * "sequence validity" rather than actually implement a delay. + */ + writel(0x00000001, fsm->base + SPI_PROGRAM_ERASE_TIME); + /* Clear FIFO, just in case */ stfsm_clear_fifo(fsm); @@ -2086,7 +2058,7 @@ static int stfsm_remove(struct platform_device *pdev) return mtd_device_unregister(&fsm->mtd); } -static struct of_device_id stfsm_match[] = { +static const struct of_device_id stfsm_match[] = { { .compatible = "st,spi-fsm", }, {}, }; diff --git a/drivers/mtd/lpddr/Kconfig b/drivers/mtd/lpddr/Kconfig index 265f969817e3..3a19cbee24d7 100644 --- a/drivers/mtd/lpddr/Kconfig +++ b/drivers/mtd/lpddr/Kconfig @@ -1,5 +1,5 @@ -menu "LPDDR flash memory drivers" - depends on MTD!=n +menu "LPDDR & LPDDR2 PCM memory drivers" + depends on MTD config MTD_LPDDR tristate "Support for LPDDR flash chips" @@ -17,4 +17,13 @@ config MTD_QINFO_PROBE Window QINFO interface, permits software to be used for entire families of devices. This serves similar purpose of CFI on legacy Flash products + +config MTD_LPDDR2_NVM + # ARM dependency is only for writel_relaxed() + depends on MTD && ARM + tristate "Support for LPDDR2-NVM flash chips" + help + This option enables support of PCM memories with a LPDDR2-NVM + (Low power double data rate 2) interface. + endmenu diff --git a/drivers/mtd/lpddr/Makefile b/drivers/mtd/lpddr/Makefile index da48e46b5812..881d440d483e 100644 --- a/drivers/mtd/lpddr/Makefile +++ b/drivers/mtd/lpddr/Makefile @@ -4,3 +4,4 @@ obj-$(CONFIG_MTD_QINFO_PROBE) += qinfo_probe.o obj-$(CONFIG_MTD_LPDDR) += lpddr_cmds.o +obj-$(CONFIG_MTD_LPDDR2_NVM) += lpddr2_nvm.o diff --git a/drivers/mtd/lpddr/lpddr2_nvm.c b/drivers/mtd/lpddr/lpddr2_nvm.c new file mode 100644 index 000000000000..063cec40d0ae --- /dev/null +++ b/drivers/mtd/lpddr/lpddr2_nvm.c @@ -0,0 +1,507 @@ +/* + * LPDDR2-NVM MTD driver. This module provides read, write, erase, lock/unlock + * support for LPDDR2-NVM PCM memories + * + * Copyright © 2012 Micron Technology, Inc. + * + * Vincenzo Aliberti <vincenzo.aliberti@gmail.com> + * Domenico Manna <domenico.manna@gmail.com> + * Many thanks to Andrea Vigilante for initial enabling + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": %s: " fmt, __func__ + +#include <linux/init.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/mtd/map.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/slab.h> +#include <linux/platform_device.h> +#include <linux/ioport.h> +#include <linux/err.h> + +/* Parameters */ +#define ERASE_BLOCKSIZE (0x00020000/2) /* in Word */ +#define WRITE_BUFFSIZE (0x00000400/2) /* in Word */ +#define OW_BASE_ADDRESS 0x00000000 /* OW offset */ +#define BUS_WIDTH 0x00000020 /* x32 devices */ + +/* PFOW symbols address offset */ +#define PFOW_QUERY_STRING_P (0x0000/2) /* in Word */ +#define PFOW_QUERY_STRING_F (0x0002/2) /* in Word */ +#define PFOW_QUERY_STRING_O (0x0004/2) /* in Word */ +#define PFOW_QUERY_STRING_W (0x0006/2) /* in Word */ + +/* OW registers address */ +#define CMD_CODE_OFS (0x0080/2) /* in Word */ +#define CMD_DATA_OFS (0x0084/2) /* in Word */ +#define CMD_ADD_L_OFS (0x0088/2) /* in Word */ +#define CMD_ADD_H_OFS (0x008A/2) /* in Word */ +#define MPR_L_OFS (0x0090/2) /* in Word */ +#define MPR_H_OFS (0x0092/2) /* in Word */ +#define CMD_EXEC_OFS (0x00C0/2) /* in Word */ +#define STATUS_REG_OFS (0x00CC/2) /* in Word */ +#define PRG_BUFFER_OFS (0x0010/2) /* in Word */ + +/* Datamask */ +#define MR_CFGMASK 0x8000 +#define SR_OK_DATAMASK 0x0080 + +/* LPDDR2-NVM Commands */ +#define LPDDR2_NVM_LOCK 0x0061 +#define LPDDR2_NVM_UNLOCK 0x0062 +#define LPDDR2_NVM_SW_PROGRAM 0x0041 +#define LPDDR2_NVM_SW_OVERWRITE 0x0042 +#define LPDDR2_NVM_BUF_PROGRAM 0x00E9 +#define LPDDR2_NVM_BUF_OVERWRITE 0x00EA +#define LPDDR2_NVM_ERASE 0x0020 + +/* LPDDR2-NVM Registers offset */ +#define LPDDR2_MODE_REG_DATA 0x0040 +#define LPDDR2_MODE_REG_CFG 0x0050 + +/* + * Internal Type Definitions + * pcm_int_data contains memory controller details: + * @reg_data : LPDDR2_MODE_REG_DATA register address after remapping + * @reg_cfg : LPDDR2_MODE_REG_CFG register address after remapping + * &bus_width: memory bus-width (eg: x16 2 Bytes, x32 4 Bytes) + */ +struct pcm_int_data { + void __iomem *ctl_regs; + int bus_width; +}; + +static DEFINE_MUTEX(lpdd2_nvm_mutex); + +/* + * Build a map_word starting from an u_long + */ +static inline map_word build_map_word(u_long myword) +{ + map_word val = { {0} }; + val.x[0] = myword; + return val; +} + +/* + * Build Mode Register Configuration DataMask based on device bus-width + */ +static inline u_int build_mr_cfgmask(u_int bus_width) +{ + u_int val = MR_CFGMASK; + + if (bus_width == 0x0004) /* x32 device */ + val = val << 16; + + return val; +} + +/* + * Build Status Register OK DataMask based on device bus-width + */ +static inline u_int build_sr_ok_datamask(u_int bus_width) +{ + u_int val = SR_OK_DATAMASK; + + if (bus_width == 0x0004) /* x32 device */ + val = (val << 16)+val; + + return val; +} + +/* + * Evaluates Overlay Window Control Registers address + */ +static inline u_long ow_reg_add(struct map_info *map, u_long offset) +{ + u_long val = 0; + struct pcm_int_data *pcm_data = map->fldrv_priv; + + val = map->pfow_base + offset*pcm_data->bus_width; + + return val; +} + +/* + * Enable lpddr2-nvm Overlay Window + * Overlay Window is a memory mapped area containing all LPDDR2-NVM registers + * used by device commands as well as uservisible resources like Device Status + * Register, Device ID, etc + */ +static inline void ow_enable(struct map_info *map) +{ + struct pcm_int_data *pcm_data = map->fldrv_priv; + + writel_relaxed(build_mr_cfgmask(pcm_data->bus_width) | 0x18, + pcm_data->ctl_regs + LPDDR2_MODE_REG_CFG); + writel_relaxed(0x01, pcm_data->ctl_regs + LPDDR2_MODE_REG_DATA); +} + +/* + * Disable lpddr2-nvm Overlay Window + * Overlay Window is a memory mapped area containing all LPDDR2-NVM registers + * used by device commands as well as uservisible resources like Device Status + * Register, Device ID, etc + */ +static inline void ow_disable(struct map_info *map) +{ + struct pcm_int_data *pcm_data = map->fldrv_priv; + + writel_relaxed(build_mr_cfgmask(pcm_data->bus_width) | 0x18, + pcm_data->ctl_regs + LPDDR2_MODE_REG_CFG); + writel_relaxed(0x02, pcm_data->ctl_regs + LPDDR2_MODE_REG_DATA); +} + +/* + * Execute lpddr2-nvm operations + */ +static int lpddr2_nvm_do_op(struct map_info *map, u_long cmd_code, + u_long cmd_data, u_long cmd_add, u_long cmd_mpr, u_char *buf) +{ + map_word add_l = { {0} }, add_h = { {0} }, mpr_l = { {0} }, + mpr_h = { {0} }, data_l = { {0} }, cmd = { {0} }, + exec_cmd = { {0} }, sr; + map_word data_h = { {0} }; /* only for 2x x16 devices stacked */ + u_long i, status_reg, prg_buff_ofs; + struct pcm_int_data *pcm_data = map->fldrv_priv; + u_int sr_ok_datamask = build_sr_ok_datamask(pcm_data->bus_width); + + /* Builds low and high words for OW Control Registers */ + add_l.x[0] = cmd_add & 0x0000FFFF; + add_h.x[0] = (cmd_add >> 16) & 0x0000FFFF; + mpr_l.x[0] = cmd_mpr & 0x0000FFFF; + mpr_h.x[0] = (cmd_mpr >> 16) & 0x0000FFFF; + cmd.x[0] = cmd_code & 0x0000FFFF; + exec_cmd.x[0] = 0x0001; + data_l.x[0] = cmd_data & 0x0000FFFF; + data_h.x[0] = (cmd_data >> 16) & 0x0000FFFF; /* only for 2x x16 */ + + /* Set Overlay Window Control Registers */ + map_write(map, cmd, ow_reg_add(map, CMD_CODE_OFS)); + map_write(map, data_l, ow_reg_add(map, CMD_DATA_OFS)); + map_write(map, add_l, ow_reg_add(map, CMD_ADD_L_OFS)); + map_write(map, add_h, ow_reg_add(map, CMD_ADD_H_OFS)); + map_write(map, mpr_l, ow_reg_add(map, MPR_L_OFS)); + map_write(map, mpr_h, ow_reg_add(map, MPR_H_OFS)); + if (pcm_data->bus_width == 0x0004) { /* 2x16 devices stacked */ + map_write(map, cmd, ow_reg_add(map, CMD_CODE_OFS) + 2); + map_write(map, data_h, ow_reg_add(map, CMD_DATA_OFS) + 2); + map_write(map, add_l, ow_reg_add(map, CMD_ADD_L_OFS) + 2); + map_write(map, add_h, ow_reg_add(map, CMD_ADD_H_OFS) + 2); + map_write(map, mpr_l, ow_reg_add(map, MPR_L_OFS) + 2); + map_write(map, mpr_h, ow_reg_add(map, MPR_H_OFS) + 2); + } + + /* Fill Program Buffer */ + if ((cmd_code == LPDDR2_NVM_BUF_PROGRAM) || + (cmd_code == LPDDR2_NVM_BUF_OVERWRITE)) { + prg_buff_ofs = (map_read(map, + ow_reg_add(map, PRG_BUFFER_OFS))).x[0]; + for (i = 0; i < cmd_mpr; i++) { + map_write(map, build_map_word(buf[i]), map->pfow_base + + prg_buff_ofs + i); + } + } + + /* Command Execute */ + map_write(map, exec_cmd, ow_reg_add(map, CMD_EXEC_OFS)); + if (pcm_data->bus_width == 0x0004) /* 2x16 devices stacked */ + map_write(map, exec_cmd, ow_reg_add(map, CMD_EXEC_OFS) + 2); + + /* Status Register Check */ + do { + sr = map_read(map, ow_reg_add(map, STATUS_REG_OFS)); + status_reg = sr.x[0]; + if (pcm_data->bus_width == 0x0004) {/* 2x16 devices stacked */ + sr = map_read(map, ow_reg_add(map, + STATUS_REG_OFS) + 2); + status_reg += sr.x[0] << 16; + } + } while ((status_reg & sr_ok_datamask) != sr_ok_datamask); + + return (((status_reg & sr_ok_datamask) == sr_ok_datamask) ? 0 : -EIO); +} + +/* + * Execute lpddr2-nvm operations @ block level + */ +static int lpddr2_nvm_do_block_op(struct mtd_info *mtd, loff_t start_add, + uint64_t len, u_char block_op) +{ + struct map_info *map = mtd->priv; + u_long add, end_add; + int ret = 0; + + mutex_lock(&lpdd2_nvm_mutex); + + ow_enable(map); + + add = start_add; + end_add = add + len; + + do { + ret = lpddr2_nvm_do_op(map, block_op, 0x00, add, add, NULL); + if (ret) + goto out; + add += mtd->erasesize; + } while (add < end_add); + +out: + ow_disable(map); + mutex_unlock(&lpdd2_nvm_mutex); + return ret; +} + +/* + * verify presence of PFOW string + */ +static int lpddr2_nvm_pfow_present(struct map_info *map) +{ + map_word pfow_val[4]; + unsigned int found = 1; + + mutex_lock(&lpdd2_nvm_mutex); + + ow_enable(map); + + /* Load string from array */ + pfow_val[0] = map_read(map, ow_reg_add(map, PFOW_QUERY_STRING_P)); + pfow_val[1] = map_read(map, ow_reg_add(map, PFOW_QUERY_STRING_F)); + pfow_val[2] = map_read(map, ow_reg_add(map, PFOW_QUERY_STRING_O)); + pfow_val[3] = map_read(map, ow_reg_add(map, PFOW_QUERY_STRING_W)); + + /* Verify the string loaded vs expected */ + if (!map_word_equal(map, build_map_word('P'), pfow_val[0])) + found = 0; + if (!map_word_equal(map, build_map_word('F'), pfow_val[1])) + found = 0; + if (!map_word_equal(map, build_map_word('O'), pfow_val[2])) + found = 0; + if (!map_word_equal(map, build_map_word('W'), pfow_val[3])) + found = 0; + + ow_disable(map); + + mutex_unlock(&lpdd2_nvm_mutex); + + return found; +} + +/* + * lpddr2_nvm driver read method + */ +static int lpddr2_nvm_read(struct mtd_info *mtd, loff_t start_add, + size_t len, size_t *retlen, u_char *buf) +{ + struct map_info *map = mtd->priv; + + mutex_lock(&lpdd2_nvm_mutex); + + *retlen = len; + + map_copy_from(map, buf, start_add, *retlen); + + mutex_unlock(&lpdd2_nvm_mutex); + return 0; +} + +/* + * lpddr2_nvm driver write method + */ +static int lpddr2_nvm_write(struct mtd_info *mtd, loff_t start_add, + size_t len, size_t *retlen, const u_char *buf) +{ + struct map_info *map = mtd->priv; + struct pcm_int_data *pcm_data = map->fldrv_priv; + u_long add, current_len, tot_len, target_len, my_data; + u_char *write_buf = (u_char *)buf; + int ret = 0; + + mutex_lock(&lpdd2_nvm_mutex); + + ow_enable(map); + + /* Set start value for the variables */ + add = start_add; + target_len = len; + tot_len = 0; + + while (tot_len < target_len) { + if (!(IS_ALIGNED(add, mtd->writesize))) { /* do sw program */ + my_data = write_buf[tot_len]; + my_data += (write_buf[tot_len+1]) << 8; + if (pcm_data->bus_width == 0x0004) {/* 2x16 devices */ + my_data += (write_buf[tot_len+2]) << 16; + my_data += (write_buf[tot_len+3]) << 24; + } + ret = lpddr2_nvm_do_op(map, LPDDR2_NVM_SW_OVERWRITE, + my_data, add, 0x00, NULL); + if (ret) + goto out; + + add += pcm_data->bus_width; + tot_len += pcm_data->bus_width; + } else { /* do buffer program */ + current_len = min(target_len - tot_len, + (u_long) mtd->writesize); + ret = lpddr2_nvm_do_op(map, LPDDR2_NVM_BUF_OVERWRITE, + 0x00, add, current_len, write_buf + tot_len); + if (ret) + goto out; + + add += current_len; + tot_len += current_len; + } + } + +out: + *retlen = tot_len; + ow_disable(map); + mutex_unlock(&lpdd2_nvm_mutex); + return ret; +} + +/* + * lpddr2_nvm driver erase method + */ +static int lpddr2_nvm_erase(struct mtd_info *mtd, struct erase_info *instr) +{ + int ret = lpddr2_nvm_do_block_op(mtd, instr->addr, instr->len, + LPDDR2_NVM_ERASE); + if (!ret) { + instr->state = MTD_ERASE_DONE; + mtd_erase_callback(instr); + } + + return ret; +} + +/* + * lpddr2_nvm driver unlock method + */ +static int lpddr2_nvm_unlock(struct mtd_info *mtd, loff_t start_add, + uint64_t len) +{ + return lpddr2_nvm_do_block_op(mtd, start_add, len, LPDDR2_NVM_UNLOCK); +} + +/* + * lpddr2_nvm driver lock method + */ +static int lpddr2_nvm_lock(struct mtd_info *mtd, loff_t start_add, + uint64_t len) +{ + return lpddr2_nvm_do_block_op(mtd, start_add, len, LPDDR2_NVM_LOCK); +} + +/* + * lpddr2_nvm driver probe method + */ +static int lpddr2_nvm_probe(struct platform_device *pdev) +{ + struct map_info *map; + struct mtd_info *mtd; + struct resource *add_range; + struct resource *control_regs; + struct pcm_int_data *pcm_data; + + /* Allocate memory control_regs data structures */ + pcm_data = devm_kzalloc(&pdev->dev, sizeof(*pcm_data), GFP_KERNEL); + if (!pcm_data) + return -ENOMEM; + + pcm_data->bus_width = BUS_WIDTH; + + /* Allocate memory for map_info & mtd_info data structures */ + map = devm_kzalloc(&pdev->dev, sizeof(*map), GFP_KERNEL); + if (!map) + return -ENOMEM; + + mtd = devm_kzalloc(&pdev->dev, sizeof(*mtd), GFP_KERNEL); + if (!mtd) + return -ENOMEM; + + /* lpddr2_nvm address range */ + add_range = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + /* Populate map_info data structure */ + *map = (struct map_info) { + .virt = devm_ioremap_resource(&pdev->dev, add_range), + .name = pdev->dev.init_name, + .phys = add_range->start, + .size = resource_size(add_range), + .bankwidth = pcm_data->bus_width / 2, + .pfow_base = OW_BASE_ADDRESS, + .fldrv_priv = pcm_data, + }; + if (IS_ERR(map->virt)) + return PTR_ERR(map->virt); + + simple_map_init(map); /* fill with default methods */ + + control_regs = platform_get_resource(pdev, IORESOURCE_MEM, 1); + pcm_data->ctl_regs = devm_ioremap_resource(&pdev->dev, control_regs); + if (IS_ERR(pcm_data->ctl_regs)) + return PTR_ERR(pcm_data->ctl_regs); + + /* Populate mtd_info data structure */ + *mtd = (struct mtd_info) { + .name = pdev->dev.init_name, + .type = MTD_RAM, + .priv = map, + .size = resource_size(add_range), + .erasesize = ERASE_BLOCKSIZE * pcm_data->bus_width, + .writesize = 1, + .writebufsize = WRITE_BUFFSIZE * pcm_data->bus_width, + .flags = (MTD_CAP_NVRAM | MTD_POWERUP_LOCK), + ._read = lpddr2_nvm_read, + ._write = lpddr2_nvm_write, + ._erase = lpddr2_nvm_erase, + ._unlock = lpddr2_nvm_unlock, + ._lock = lpddr2_nvm_lock, + }; + + /* Verify the presence of the device looking for PFOW string */ + if (!lpddr2_nvm_pfow_present(map)) { + pr_err("device not recognized\n"); + return -EINVAL; + } + /* Parse partitions and register the MTD device */ + return mtd_device_parse_register(mtd, NULL, NULL, NULL, 0); +} + +/* + * lpddr2_nvm driver remove method + */ +static int lpddr2_nvm_remove(struct platform_device *pdev) +{ + return mtd_device_unregister(dev_get_drvdata(&pdev->dev)); +} + +/* Initialize platform_driver data structure for lpddr2_nvm */ +static struct platform_driver lpddr2_nvm_drv = { + .driver = { + .name = "lpddr2_nvm", + }, + .probe = lpddr2_nvm_probe, + .remove = lpddr2_nvm_remove, +}; + +module_platform_driver(lpddr2_nvm_drv); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Vincenzo Aliberti <vincenzo.aliberti@gmail.com>"); +MODULE_DESCRIPTION("MTD driver for LPDDR2-NVM PCM memories"); diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index fce23fe043f7..21b2874a303b 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -108,7 +108,7 @@ config MTD_SUN_UFLASH config MTD_SC520CDP tristate "CFI Flash device mapped on AMD SC520 CDP" - depends on X86 && MTD_CFI + depends on (MELAN || COMPILE_TEST) && MTD_CFI help The SC520 CDP board has two banks of CFI-compliant chips and one Dual-in-line JEDEC chip. This 'mapping' driver supports that @@ -116,7 +116,7 @@ config MTD_SC520CDP config MTD_NETSC520 tristate "CFI Flash device mapped on AMD NetSc520" - depends on X86 && MTD_CFI + depends on (MELAN || COMPILE_TEST) && MTD_CFI help This enables access routines for the flash chips on the AMD NetSc520 demonstration board. If you have one of these boards and would like diff --git a/drivers/mtd/maps/sc520cdp.c b/drivers/mtd/maps/sc520cdp.c index 8fead8e46bce..093edd51bdc7 100644 --- a/drivers/mtd/maps/sc520cdp.c +++ b/drivers/mtd/maps/sc520cdp.c @@ -183,7 +183,7 @@ static const struct sc520_par_table par_table[NUM_FLASH_BANKS] = static void sc520cdp_setup_par(void) { - volatile unsigned long __iomem *mmcr; + unsigned long __iomem *mmcr; unsigned long mmcr_val; int i, j; @@ -203,11 +203,11 @@ static void sc520cdp_setup_par(void) */ for(i = 0; i < NUM_FLASH_BANKS; i++) { /* for each par_table entry */ for(j = 0; j < NUM_SC520_PAR; j++) { /* for each PAR register */ - mmcr_val = mmcr[SC520_PAR(j)]; + mmcr_val = readl(&mmcr[SC520_PAR(j)]); /* if target device field matches, reprogram the PAR */ if((mmcr_val & SC520_PAR_TRGDEV) == par_table[i].trgdev) { - mmcr[SC520_PAR(j)] = par_table[i].new_par; + writel(par_table[i].new_par, &mmcr[SC520_PAR(j)]); break; } } diff --git a/drivers/mtd/maps/solutionengine.c b/drivers/mtd/maps/solutionengine.c index 83a7a7091562..bb580bc16445 100644 --- a/drivers/mtd/maps/solutionengine.c +++ b/drivers/mtd/maps/solutionengine.c @@ -33,28 +33,6 @@ struct map_info soleng_flash_map = { static const char * const probes[] = { "RedBoot", "cmdlinepart", NULL }; -#ifdef CONFIG_MTD_SUPERH_RESERVE -static struct mtd_partition superh_se_partitions[] = { - /* Reserved for boot code, read-only */ - { - .name = "flash_boot", - .offset = 0x00000000, - .size = CONFIG_MTD_SUPERH_RESERVE, - .mask_flags = MTD_WRITEABLE, - }, - /* All else is writable (e.g. JFFS) */ - { - .name = "Flash FS", - .offset = MTDPART_OFS_NXTBLK, - .size = MTDPART_SIZ_FULL, - } -}; -#define NUM_PARTITIONS ARRAY_SIZE(superh_se_partitions) -#else -#define superh_se_partitions NULL -#define NUM_PARTITIONS 0 -#endif /* CONFIG_MTD_SUPERH_RESERVE */ - static int __init init_soleng_maps(void) { /* First probe at offset 0 */ @@ -92,8 +70,7 @@ static int __init init_soleng_maps(void) mtd_device_register(eprom_mtd, NULL, 0); } - mtd_device_parse_register(flash_mtd, probes, NULL, - superh_se_partitions, NUM_PARTITIONS); + mtd_device_parse_register(flash_mtd, probes, NULL, NULL, 0); return 0; } diff --git a/drivers/mtd/mtd_blkdevs.c b/drivers/mtd/mtd_blkdevs.c index 0b2ccb68c0d0..43e30992a369 100644 --- a/drivers/mtd/mtd_blkdevs.c +++ b/drivers/mtd/mtd_blkdevs.c @@ -82,12 +82,14 @@ static int do_blktrans_request(struct mtd_blktrans_ops *tr, block = blk_rq_pos(req) << 9 >> tr->blkshift; nsect = blk_rq_cur_bytes(req) >> tr->blkshift; - - buf = req->buffer; + buf = bio_data(req->bio); if (req->cmd_type != REQ_TYPE_FS) return -EIO; + if (req->cmd_flags & REQ_FLUSH) + return tr->flush(dev); + if (blk_rq_pos(req) + blk_rq_cur_sectors(req) > get_capacity(req->rq_disk)) return -EIO; @@ -408,6 +410,9 @@ int add_mtd_blktrans_dev(struct mtd_blktrans_dev *new) if (!new->rq) goto error3; + if (tr->flush) + blk_queue_flush(new->rq, REQ_FLUSH); + new->rq->queuedata = new; blk_queue_logical_block_size(new->rq, tr->blksize); diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c index 7d4e7b9da3a1..a0f54e80670c 100644 --- a/drivers/mtd/mtdchar.c +++ b/drivers/mtd/mtdchar.c @@ -568,13 +568,18 @@ static int mtdchar_write_ioctl(struct mtd_info *mtd, { struct mtd_write_req req; struct mtd_oob_ops ops; - void __user *usr_data, *usr_oob; + const void __user *usr_data, *usr_oob; int ret; - if (copy_from_user(&req, argp, sizeof(req)) || - !access_ok(VERIFY_READ, req.usr_data, req.len) || - !access_ok(VERIFY_READ, req.usr_oob, req.ooblen)) + if (copy_from_user(&req, argp, sizeof(req))) return -EFAULT; + + usr_data = (const void __user *)(uintptr_t)req.usr_data; + usr_oob = (const void __user *)(uintptr_t)req.usr_oob; + if (!access_ok(VERIFY_READ, usr_data, req.len) || + !access_ok(VERIFY_READ, usr_oob, req.ooblen)) + return -EFAULT; + if (!mtd->_write_oob) return -EOPNOTSUPP; @@ -583,10 +588,7 @@ static int mtdchar_write_ioctl(struct mtd_info *mtd, ops.ooblen = (size_t)req.ooblen; ops.ooboffs = 0; - usr_data = (void __user *)(uintptr_t)req.usr_data; - usr_oob = (void __user *)(uintptr_t)req.usr_oob; - - if (req.usr_data) { + if (usr_data) { ops.datbuf = memdup_user(usr_data, ops.len); if (IS_ERR(ops.datbuf)) return PTR_ERR(ops.datbuf); @@ -594,7 +596,7 @@ static int mtdchar_write_ioctl(struct mtd_info *mtd, ops.datbuf = NULL; } - if (req.usr_oob) { + if (usr_oob) { ops.oobbuf = memdup_user(usr_oob, ops.ooblen); if (IS_ERR(ops.oobbuf)) { kfree(ops.datbuf); diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c index b7a24946ca26..722898aea7a6 100644 --- a/drivers/mtd/nand/bf5xx_nand.c +++ b/drivers/mtd/nand/bf5xx_nand.c @@ -679,9 +679,6 @@ static int bf5xx_nand_remove(struct platform_device *pdev) peripheral_free_list(bfin_nfc_pin_req); bf5xx_nand_dma_remove(info); - /* free the common resources */ - kfree(info); - return 0; } @@ -742,10 +739,10 @@ static int bf5xx_nand_probe(struct platform_device *pdev) return -EFAULT; } - info = kzalloc(sizeof(*info), GFP_KERNEL); + info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); if (info == NULL) { err = -ENOMEM; - goto out_err_kzalloc; + goto out_err; } platform_set_drvdata(pdev, info); @@ -790,7 +787,7 @@ static int bf5xx_nand_probe(struct platform_device *pdev) /* initialise the hardware */ err = bf5xx_nand_hw_init(info); if (err) - goto out_err_hw_init; + goto out_err; /* setup hardware ECC data struct */ if (hardware_ecc) { @@ -827,9 +824,7 @@ static int bf5xx_nand_probe(struct platform_device *pdev) out_err_nand_scan: bf5xx_nand_dma_remove(info); -out_err_hw_init: - kfree(info); -out_err_kzalloc: +out_err: peripheral_free_list(bfin_nfc_pin_req); return err; diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c index 4615d79fc93f..b922c8efcf40 100644 --- a/drivers/mtd/nand/davinci_nand.c +++ b/drivers/mtd/nand/davinci_nand.c @@ -523,6 +523,7 @@ static struct nand_ecclayout hwecc4_2048 = { #if defined(CONFIG_OF) static const struct of_device_id davinci_nand_of_match[] = { {.compatible = "ti,davinci-nand", }, + {.compatible = "ti,keystone-nand", }, {}, }; MODULE_DEVICE_TABLE(of, davinci_nand_of_match); @@ -581,6 +582,11 @@ static struct davinci_nand_pdata of_property_read_bool(pdev->dev.of_node, "ti,davinci-nand-use-bbt")) pdata->bbt_options = NAND_BBT_USE_FLASH; + + if (of_device_is_compatible(pdev->dev.of_node, + "ti,keystone-nand")) { + pdata->options |= NAND_NO_SUBPAGE_WRITE; + } } return dev_get_platdata(&pdev->dev); diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c index c07cd573ad3a..9f2012a3e764 100644 --- a/drivers/mtd/nand/denali.c +++ b/drivers/mtd/nand/denali.c @@ -1233,7 +1233,7 @@ static int denali_waitfunc(struct mtd_info *mtd, struct nand_chip *chip) return status; } -static void denali_erase(struct mtd_info *mtd, int page) +static int denali_erase(struct mtd_info *mtd, int page) { struct denali_nand_info *denali = mtd_to_denali(mtd); @@ -1250,8 +1250,7 @@ static void denali_erase(struct mtd_info *mtd, int page) irq_status = wait_for_irq(denali, INTR_STATUS__ERASE_COMP | INTR_STATUS__ERASE_FAIL); - denali->status = (irq_status & INTR_STATUS__ERASE_FAIL) ? - NAND_STATUS_FAIL : PASS; + return (irq_status & INTR_STATUS__ERASE_FAIL) ? NAND_STATUS_FAIL : PASS; } static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col, @@ -1584,7 +1583,7 @@ int denali_init(struct denali_nand_info *denali) denali->nand.ecc.write_page_raw = denali_write_page_raw; denali->nand.ecc.read_oob = denali_read_oob; denali->nand.ecc.write_oob = denali_write_oob; - denali->nand.erase_cmd = denali_erase; + denali->nand.erase = denali_erase; if (nand_scan_tail(&denali->mtd)) { ret = -ENXIO; diff --git a/drivers/mtd/nand/docg4.c b/drivers/mtd/nand/docg4.c index 1b0265e85a06..ce24637e14f1 100644 --- a/drivers/mtd/nand/docg4.c +++ b/drivers/mtd/nand/docg4.c @@ -872,7 +872,7 @@ static int docg4_read_oob(struct mtd_info *mtd, struct nand_chip *nand, return 0; } -static void docg4_erase_block(struct mtd_info *mtd, int page) +static int docg4_erase_block(struct mtd_info *mtd, int page) { struct nand_chip *nand = mtd->priv; struct docg4_priv *doc = nand->priv; @@ -916,6 +916,8 @@ static void docg4_erase_block(struct mtd_info *mtd, int page) write_nop(docptr); poll_status(doc); write_nop(docptr); + + return nand->waitfunc(mtd, nand); } static int write_page(struct mtd_info *mtd, struct nand_chip *nand, @@ -1236,7 +1238,7 @@ static void __init init_mtd_structs(struct mtd_info *mtd) nand->block_markbad = docg4_block_markbad; nand->read_buf = docg4_read_buf; nand->write_buf = docg4_write_buf16; - nand->erase_cmd = docg4_erase_block; + nand->erase = docg4_erase_block; nand->ecc.read_page = docg4_read_page; nand->ecc.write_page = docg4_write_page; nand->ecc.read_page_raw = docg4_read_page_raw; diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c index ec549cd9849f..545a5c002f09 100644 --- a/drivers/mtd/nand/fsl_elbc_nand.c +++ b/drivers/mtd/nand/fsl_elbc_nand.c @@ -723,6 +723,19 @@ static int fsl_elbc_write_page(struct mtd_info *mtd, struct nand_chip *chip, return 0; } +/* ECC will be calculated automatically, and errors will be detected in + * waitfunc. + */ +static int fsl_elbc_write_subpage(struct mtd_info *mtd, struct nand_chip *chip, + uint32_t offset, uint32_t data_len, + const uint8_t *buf, int oob_required) +{ + fsl_elbc_write_buf(mtd, buf, mtd->writesize); + fsl_elbc_write_buf(mtd, chip->oob_poi, mtd->oobsize); + + return 0; +} + static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv) { struct fsl_lbc_ctrl *ctrl = priv->ctrl; @@ -761,6 +774,7 @@ static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv) chip->ecc.read_page = fsl_elbc_read_page; chip->ecc.write_page = fsl_elbc_write_page; + chip->ecc.write_subpage = fsl_elbc_write_subpage; /* If CS Base Register selects full hardware ECC then use it */ if ((in_be32(&lbc->bank[priv->bank].br) & BR_DECC) == diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c index cb45d2f8e208..2338124dd05f 100644 --- a/drivers/mtd/nand/fsl_ifc_nand.c +++ b/drivers/mtd/nand/fsl_ifc_nand.c @@ -56,7 +56,7 @@ struct fsl_ifc_nand_ctrl { struct nand_hw_control controller; struct fsl_ifc_mtd *chips[FSL_IFC_BANK_COUNT]; - u8 __iomem *addr; /* Address of assigned IFC buffer */ + void __iomem *addr; /* Address of assigned IFC buffer */ unsigned int page; /* Last page written to / read from */ unsigned int read_bytes;/* Number of bytes read during command */ unsigned int column; /* Saved column from SEQIN */ @@ -591,7 +591,10 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command, * The chip always seems to report that it is * write-protected, even when it is not. */ - setbits8(ifc_nand_ctrl->addr, NAND_STATUS_WP); + if (chip->options & NAND_BUSWIDTH_16) + setbits16(ifc_nand_ctrl->addr, NAND_STATUS_WP); + else + setbits8(ifc_nand_ctrl->addr, NAND_STATUS_WP); return; case NAND_CMD_RESET: @@ -636,7 +639,7 @@ static void fsl_ifc_write_buf(struct mtd_info *mtd, const u8 *buf, int len) len = bufsize - ifc_nand_ctrl->index; } - memcpy_toio(&ifc_nand_ctrl->addr[ifc_nand_ctrl->index], buf, len); + memcpy_toio(ifc_nand_ctrl->addr + ifc_nand_ctrl->index, buf, len); ifc_nand_ctrl->index += len; } @@ -648,13 +651,16 @@ static uint8_t fsl_ifc_read_byte(struct mtd_info *mtd) { struct nand_chip *chip = mtd->priv; struct fsl_ifc_mtd *priv = chip->priv; + unsigned int offset; /* * If there are still bytes in the IFC buffer, then use the * next byte. */ - if (ifc_nand_ctrl->index < ifc_nand_ctrl->read_bytes) - return in_8(&ifc_nand_ctrl->addr[ifc_nand_ctrl->index++]); + if (ifc_nand_ctrl->index < ifc_nand_ctrl->read_bytes) { + offset = ifc_nand_ctrl->index++; + return in_8(ifc_nand_ctrl->addr + offset); + } dev_err(priv->dev, "%s: beyond end of buffer\n", __func__); return ERR_BYTE; @@ -675,8 +681,7 @@ static uint8_t fsl_ifc_read_byte16(struct mtd_info *mtd) * next byte. */ if (ifc_nand_ctrl->index < ifc_nand_ctrl->read_bytes) { - data = in_be16((uint16_t __iomem *)&ifc_nand_ctrl-> - addr[ifc_nand_ctrl->index]); + data = in_be16(ifc_nand_ctrl->addr + ifc_nand_ctrl->index); ifc_nand_ctrl->index += 2; return (uint8_t) data; } @@ -701,7 +706,7 @@ static void fsl_ifc_read_buf(struct mtd_info *mtd, u8 *buf, int len) avail = min((unsigned int)len, ifc_nand_ctrl->read_bytes - ifc_nand_ctrl->index); - memcpy_fromio(buf, &ifc_nand_ctrl->addr[ifc_nand_ctrl->index], avail); + memcpy_fromio(buf, ifc_nand_ctrl->addr + ifc_nand_ctrl->index, avail); ifc_nand_ctrl->index += avail; if (len > avail) diff --git a/drivers/mtd/nand/gpmi-nand/bch-regs.h b/drivers/mtd/nand/gpmi-nand/bch-regs.h index 588f5374047c..05bb91f2f4c4 100644 --- a/drivers/mtd/nand/gpmi-nand/bch-regs.h +++ b/drivers/mtd/nand/gpmi-nand/bch-regs.h @@ -54,7 +54,7 @@ #define MX6Q_BP_BCH_FLASH0LAYOUT0_ECC0 11 #define MX6Q_BM_BCH_FLASH0LAYOUT0_ECC0 (0x1f << MX6Q_BP_BCH_FLASH0LAYOUT0_ECC0) #define BF_BCH_FLASH0LAYOUT0_ECC0(v, x) \ - (GPMI_IS_MX6Q(x) \ + (GPMI_IS_MX6(x) \ ? (((v) << MX6Q_BP_BCH_FLASH0LAYOUT0_ECC0) \ & MX6Q_BM_BCH_FLASH0LAYOUT0_ECC0) \ : (((v) << BP_BCH_FLASH0LAYOUT0_ECC0) \ @@ -65,7 +65,7 @@ #define MX6Q_BM_BCH_FLASH0LAYOUT0_GF_13_14 \ (0x1 << MX6Q_BP_BCH_FLASH0LAYOUT0_GF_13_14) #define BF_BCH_FLASH0LAYOUT0_GF(v, x) \ - ((GPMI_IS_MX6Q(x) && ((v) == 14)) \ + ((GPMI_IS_MX6(x) && ((v) == 14)) \ ? (((1) << MX6Q_BP_BCH_FLASH0LAYOUT0_GF_13_14) \ & MX6Q_BM_BCH_FLASH0LAYOUT0_GF_13_14) \ : 0 \ @@ -77,7 +77,7 @@ #define MX6Q_BM_BCH_FLASH0LAYOUT0_DATA0_SIZE \ (0x3ff << BP_BCH_FLASH0LAYOUT0_DATA0_SIZE) #define BF_BCH_FLASH0LAYOUT0_DATA0_SIZE(v, x) \ - (GPMI_IS_MX6Q(x) \ + (GPMI_IS_MX6(x) \ ? (((v) >> 2) & MX6Q_BM_BCH_FLASH0LAYOUT0_DATA0_SIZE) \ : ((v) & BM_BCH_FLASH0LAYOUT0_DATA0_SIZE) \ ) @@ -96,7 +96,7 @@ #define MX6Q_BP_BCH_FLASH0LAYOUT1_ECCN 11 #define MX6Q_BM_BCH_FLASH0LAYOUT1_ECCN (0x1f << MX6Q_BP_BCH_FLASH0LAYOUT1_ECCN) #define BF_BCH_FLASH0LAYOUT1_ECCN(v, x) \ - (GPMI_IS_MX6Q(x) \ + (GPMI_IS_MX6(x) \ ? (((v) << MX6Q_BP_BCH_FLASH0LAYOUT1_ECCN) \ & MX6Q_BM_BCH_FLASH0LAYOUT1_ECCN) \ : (((v) << BP_BCH_FLASH0LAYOUT1_ECCN) \ @@ -107,7 +107,7 @@ #define MX6Q_BM_BCH_FLASH0LAYOUT1_GF_13_14 \ (0x1 << MX6Q_BP_BCH_FLASH0LAYOUT1_GF_13_14) #define BF_BCH_FLASH0LAYOUT1_GF(v, x) \ - ((GPMI_IS_MX6Q(x) && ((v) == 14)) \ + ((GPMI_IS_MX6(x) && ((v) == 14)) \ ? (((1) << MX6Q_BP_BCH_FLASH0LAYOUT1_GF_13_14) \ & MX6Q_BM_BCH_FLASH0LAYOUT1_GF_13_14) \ : 0 \ @@ -119,7 +119,7 @@ #define MX6Q_BM_BCH_FLASH0LAYOUT1_DATAN_SIZE \ (0x3ff << BP_BCH_FLASH0LAYOUT1_DATAN_SIZE) #define BF_BCH_FLASH0LAYOUT1_DATAN_SIZE(v, x) \ - (GPMI_IS_MX6Q(x) \ + (GPMI_IS_MX6(x) \ ? (((v) >> 2) & MX6Q_BM_BCH_FLASH0LAYOUT1_DATAN_SIZE) \ : ((v) & BM_BCH_FLASH0LAYOUT1_DATAN_SIZE) \ ) diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c index dd1df605a1d6..87e658ce23ef 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c @@ -861,7 +861,7 @@ static void gpmi_compute_edo_timing(struct gpmi_nand_data *this, struct resources *r = &this->resources; unsigned long rate = clk_get_rate(r->clock[0]); int mode = this->timing_mode; - int dll_threshold = 16; /* in ns */ + int dll_threshold = this->devdata->max_chain_delay; unsigned long delay; unsigned long clk_period; int t_rea; @@ -886,9 +886,6 @@ static void gpmi_compute_edo_timing(struct gpmi_nand_data *this, /* [3] for GPMI_HW_GPMI_CTRL1 */ hw->wrn_dly_sel = BV_GPMI_CTRL1_WRN_DLY_SEL_NO_DELAY; - if (GPMI_IS_MX6Q(this)) - dll_threshold = 12; - /* * Enlarge 10 times for the numerator and denominator in {3}. * This make us to get more accurate result. @@ -974,7 +971,7 @@ int gpmi_extra_init(struct gpmi_nand_data *this) struct nand_chip *chip = &this->nand; /* Enable the asynchronous EDO feature. */ - if (GPMI_IS_MX6Q(this) && chip->onfi_version) { + if (GPMI_IS_MX6(this) && chip->onfi_version) { int mode = onfi_get_async_timing_mode(chip); /* We only support the timing mode 4 and mode 5. */ @@ -1096,12 +1093,12 @@ int gpmi_is_ready(struct gpmi_nand_data *this, unsigned chip) if (GPMI_IS_MX23(this)) { mask = MX23_BM_GPMI_DEBUG_READY0 << chip; reg = readl(r->gpmi_regs + HW_GPMI_DEBUG); - } else if (GPMI_IS_MX28(this) || GPMI_IS_MX6Q(this)) { + } else if (GPMI_IS_MX28(this) || GPMI_IS_MX6(this)) { /* * In the imx6, all the ready/busy pins are bound * together. So we only need to check chip 0. */ - if (GPMI_IS_MX6Q(this)) + if (GPMI_IS_MX6(this)) chip = 0; /* MX28 shares the same R/B register as MX6Q. */ diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c index bb77f750e75a..f638cd8077ca 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c @@ -53,6 +53,30 @@ static struct nand_ecclayout gpmi_hw_ecclayout = { .oobfree = { {.offset = 0, .length = 0} } }; +static const struct gpmi_devdata gpmi_devdata_imx23 = { + .type = IS_MX23, + .bch_max_ecc_strength = 20, + .max_chain_delay = 16, +}; + +static const struct gpmi_devdata gpmi_devdata_imx28 = { + .type = IS_MX28, + .bch_max_ecc_strength = 20, + .max_chain_delay = 16, +}; + +static const struct gpmi_devdata gpmi_devdata_imx6q = { + .type = IS_MX6Q, + .bch_max_ecc_strength = 40, + .max_chain_delay = 12, +}; + +static const struct gpmi_devdata gpmi_devdata_imx6sx = { + .type = IS_MX6SX, + .bch_max_ecc_strength = 62, + .max_chain_delay = 12, +}; + static irqreturn_t bch_irq(int irq, void *cookie) { struct gpmi_nand_data *this = cookie; @@ -102,14 +126,8 @@ static inline bool gpmi_check_ecc(struct gpmi_nand_data *this) /* The mx23/mx28 only support the GF13. */ if (geo->gf_len == 14) return false; - - if (geo->ecc_strength > MXS_ECC_STRENGTH_MAX) - return false; - } else if (GPMI_IS_MX6Q(this)) { - if (geo->ecc_strength > MX6_ECC_STRENGTH_MAX) - return false; } - return true; + return geo->ecc_strength <= this->devdata->bch_max_ecc_strength; } /* @@ -270,8 +288,7 @@ static int legacy_set_geometry(struct gpmi_nand_data *this) "We can not support this nand chip." " Its required ecc strength(%d) is beyond our" " capability(%d).\n", geo->ecc_strength, - (GPMI_IS_MX6Q(this) ? MX6_ECC_STRENGTH_MAX - : MXS_ECC_STRENGTH_MAX)); + this->devdata->bch_max_ecc_strength); return -EINVAL; } @@ -572,7 +589,7 @@ static int gpmi_get_clks(struct gpmi_nand_data *this) } /* Get extra clocks */ - if (GPMI_IS_MX6Q(this)) + if (GPMI_IS_MX6(this)) extra_clks = extra_clks_for_mx6q; if (!extra_clks) return 0; @@ -590,9 +607,9 @@ static int gpmi_get_clks(struct gpmi_nand_data *this) r->clock[i] = clk; } - if (GPMI_IS_MX6Q(this)) + if (GPMI_IS_MX6(this)) /* - * Set the default value for the gpmi clock in mx6q: + * Set the default value for the gpmi clock. * * If you want to use the ONFI nand which is in the * Synchronous Mode, you should change the clock as you need. @@ -1655,7 +1672,7 @@ static int gpmi_init_last(struct gpmi_nand_data *this) * (1) the chip is imx6, and * (2) the size of the ECC parity is byte aligned. */ - if (GPMI_IS_MX6Q(this) && + if (GPMI_IS_MX6(this) && ((bch_geo->gf_len * bch_geo->ecc_strength) % 8) == 0) { ecc->read_subpage = gpmi_ecc_read_subpage; chip->options |= NAND_SUBPAGE_READ; @@ -1711,7 +1728,7 @@ static int gpmi_nand_init(struct gpmi_nand_data *this) if (ret) goto err_out; - ret = nand_scan_ident(mtd, GPMI_IS_MX6Q(this) ? 2 : 1, NULL); + ret = nand_scan_ident(mtd, GPMI_IS_MX6(this) ? 2 : 1, NULL); if (ret) goto err_out; @@ -1740,23 +1757,19 @@ err_out: return ret; } -static const struct platform_device_id gpmi_ids[] = { - { .name = "imx23-gpmi-nand", .driver_data = IS_MX23, }, - { .name = "imx28-gpmi-nand", .driver_data = IS_MX28, }, - { .name = "imx6q-gpmi-nand", .driver_data = IS_MX6Q, }, - {} -}; - static const struct of_device_id gpmi_nand_id_table[] = { { .compatible = "fsl,imx23-gpmi-nand", - .data = (void *)&gpmi_ids[IS_MX23], + .data = (void *)&gpmi_devdata_imx23, }, { .compatible = "fsl,imx28-gpmi-nand", - .data = (void *)&gpmi_ids[IS_MX28], + .data = (void *)&gpmi_devdata_imx28, }, { .compatible = "fsl,imx6q-gpmi-nand", - .data = (void *)&gpmi_ids[IS_MX6Q], + .data = (void *)&gpmi_devdata_imx6q, + }, { + .compatible = "fsl,imx6sx-gpmi-nand", + .data = (void *)&gpmi_devdata_imx6sx, }, {} }; MODULE_DEVICE_TABLE(of, gpmi_nand_id_table); @@ -1767,18 +1780,18 @@ static int gpmi_nand_probe(struct platform_device *pdev) const struct of_device_id *of_id; int ret; + this = devm_kzalloc(&pdev->dev, sizeof(*this), GFP_KERNEL); + if (!this) + return -ENOMEM; + of_id = of_match_device(gpmi_nand_id_table, &pdev->dev); if (of_id) { - pdev->id_entry = of_id->data; + this->devdata = of_id->data; } else { dev_err(&pdev->dev, "Failed to find the right device id.\n"); return -ENODEV; } - this = devm_kzalloc(&pdev->dev, sizeof(*this), GFP_KERNEL); - if (!this) - return -ENOMEM; - platform_set_drvdata(pdev, this); this->pdev = pdev; this->dev = &pdev->dev; @@ -1823,7 +1836,6 @@ static struct platform_driver gpmi_nand_driver = { }, .probe = gpmi_nand_probe, .remove = gpmi_nand_remove, - .id_table = gpmi_ids, }; module_platform_driver(gpmi_nand_driver); diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h index 4c801fa18725..32c6ba49f986 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h @@ -119,11 +119,25 @@ struct nand_timing { int8_t tRHOH_in_ns; }; +enum gpmi_type { + IS_MX23, + IS_MX28, + IS_MX6Q, + IS_MX6SX +}; + +struct gpmi_devdata { + enum gpmi_type type; + int bch_max_ecc_strength; + int max_chain_delay; /* See the async EDO mode */ +}; + struct gpmi_nand_data { /* flags */ #define GPMI_ASYNC_EDO_ENABLED (1 << 0) #define GPMI_TIMING_INIT_OK (1 << 1) int flags; + const struct gpmi_devdata *devdata; /* System Interface */ struct device *dev; @@ -281,15 +295,11 @@ extern int gpmi_read_page(struct gpmi_nand_data *, #define STATUS_ERASED 0xff #define STATUS_UNCORRECTABLE 0xfe -/* BCH's bit correction capability. */ -#define MXS_ECC_STRENGTH_MAX 20 /* mx23 and mx28 */ -#define MX6_ECC_STRENGTH_MAX 40 - -/* Use the platform_id to distinguish different Archs. */ -#define IS_MX23 0x0 -#define IS_MX28 0x1 -#define IS_MX6Q 0x2 -#define GPMI_IS_MX23(x) ((x)->pdev->id_entry->driver_data == IS_MX23) -#define GPMI_IS_MX28(x) ((x)->pdev->id_entry->driver_data == IS_MX28) -#define GPMI_IS_MX6Q(x) ((x)->pdev->id_entry->driver_data == IS_MX6Q) +/* Use the devdata to distinguish different Archs. */ +#define GPMI_IS_MX23(x) ((x)->devdata->type == IS_MX23) +#define GPMI_IS_MX28(x) ((x)->devdata->type == IS_MX28) +#define GPMI_IS_MX6Q(x) ((x)->devdata->type == IS_MX6Q) +#define GPMI_IS_MX6SX(x) ((x)->devdata->type == IS_MX6SX) + +#define GPMI_IS_MX6(x) (GPMI_IS_MX6Q(x) || GPMI_IS_MX6SX(x)) #endif diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 9d01c4df838c..41167e9e991e 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -37,6 +37,7 @@ #include <linux/err.h> #include <linux/sched.h> #include <linux/slab.h> +#include <linux/mm.h> #include <linux/types.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> @@ -1204,8 +1205,7 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, * ecc.pos. Let's make sure that there are no gaps in ECC positions. */ for (i = 0; i < eccfrag_len - 1; i++) { - if (eccpos[i + start_step * chip->ecc.bytes] + 1 != - eccpos[i + start_step * chip->ecc.bytes + 1]) { + if (eccpos[i + index] + 1 != eccpos[i + index + 1]) { gaps = 1; break; } @@ -1501,6 +1501,7 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from, mtd->oobavail : mtd->oobsize; uint8_t *bufpoi, *oob, *buf; + int use_bufpoi; unsigned int max_bitflips = 0; int retry_mode = 0; bool ecc_fail = false; @@ -1523,9 +1524,20 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from, bytes = min(mtd->writesize - col, readlen); aligned = (bytes == mtd->writesize); + if (!aligned) + use_bufpoi = 1; + else if (chip->options & NAND_USE_BOUNCE_BUFFER) + use_bufpoi = !virt_addr_valid(buf); + else + use_bufpoi = 0; + /* Is the current page in the buffer? */ if (realpage != chip->pagebuf || oob) { - bufpoi = aligned ? buf : chip->buffers->databuf; + bufpoi = use_bufpoi ? chip->buffers->databuf : buf; + + if (use_bufpoi && aligned) + pr_debug("%s: using read bounce buffer for buf@%p\n", + __func__, buf); read_retry: chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page); @@ -1547,7 +1559,7 @@ read_retry: ret = chip->ecc.read_page(mtd, chip, bufpoi, oob_required, page); if (ret < 0) { - if (!aligned) + if (use_bufpoi) /* Invalidate page cache */ chip->pagebuf = -1; break; @@ -1556,7 +1568,7 @@ read_retry: max_bitflips = max_t(unsigned int, max_bitflips, ret); /* Transfer not aligned data */ - if (!aligned) { + if (use_bufpoi) { if (!NAND_HAS_SUBPAGE_READ(chip) && !oob && !(mtd->ecc_stats.failed - ecc_failures) && (ops->mode != MTD_OPS_RAW)) { @@ -2376,11 +2388,23 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to, int bytes = mtd->writesize; int cached = writelen > bytes && page != blockmask; uint8_t *wbuf = buf; + int use_bufpoi; + int part_pagewr = (column || writelen < (mtd->writesize - 1)); + + if (part_pagewr) + use_bufpoi = 1; + else if (chip->options & NAND_USE_BOUNCE_BUFFER) + use_bufpoi = !virt_addr_valid(buf); + else + use_bufpoi = 0; - /* Partial page write? */ - if (unlikely(column || writelen < (mtd->writesize - 1))) { + /* Partial page write?, or need to use bounce buffer */ + if (use_bufpoi) { + pr_debug("%s: using write bounce buffer for buf@%p\n", + __func__, buf); cached = 0; - bytes = min_t(int, bytes - column, (int) writelen); + if (part_pagewr) + bytes = min_t(int, bytes - column, writelen); chip->pagebuf = -1; memset(chip->buffers->databuf, 0xff, mtd->writesize); memcpy(&chip->buffers->databuf[column], buf, bytes); @@ -2618,18 +2642,20 @@ out: } /** - * single_erase_cmd - [GENERIC] NAND standard block erase command function + * single_erase - [GENERIC] NAND standard block erase command function * @mtd: MTD device structure * @page: the page address of the block which will be erased * - * Standard erase command for NAND chips. + * Standard erase command for NAND chips. Returns NAND status. */ -static void single_erase_cmd(struct mtd_info *mtd, int page) +static int single_erase(struct mtd_info *mtd, int page) { struct nand_chip *chip = mtd->priv; /* Send commands to erase a block */ chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page); chip->cmdfunc(mtd, NAND_CMD_ERASE2, -1, -1); + + return chip->waitfunc(mtd, chip); } /** @@ -2710,9 +2736,7 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr, (page + pages_per_block)) chip->pagebuf = -1; - chip->erase_cmd(mtd, page & chip->pagemask); - - status = chip->waitfunc(mtd, chip); + status = chip->erase(mtd, page & chip->pagemask); /* * See if operation failed and additional status checks are @@ -3607,7 +3631,7 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd, chip->onfi_version = 0; if (!type->name || !type->pagesize) { - /* Check is chip is ONFI compliant */ + /* Check if the chip is ONFI compliant */ if (nand_flash_detect_onfi(mtd, chip, &busw)) goto ident_done; @@ -3685,7 +3709,7 @@ ident_done: } chip->badblockbits = 8; - chip->erase_cmd = single_erase_cmd; + chip->erase = single_erase; /* Do not replace user supplied command function! */ if (mtd->writesize > 512 && chip->cmdfunc == nand_command) @@ -3770,6 +3794,39 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips, } EXPORT_SYMBOL(nand_scan_ident); +/* + * Check if the chip configuration meet the datasheet requirements. + + * If our configuration corrects A bits per B bytes and the minimum + * required correction level is X bits per Y bytes, then we must ensure + * both of the following are true: + * + * (1) A / B >= X / Y + * (2) A >= X + * + * Requirement (1) ensures we can correct for the required bitflip density. + * Requirement (2) ensures we can correct even when all bitflips are clumped + * in the same sector. + */ +static bool nand_ecc_strength_good(struct mtd_info *mtd) +{ + struct nand_chip *chip = mtd->priv; + struct nand_ecc_ctrl *ecc = &chip->ecc; + int corr, ds_corr; + + if (ecc->size == 0 || chip->ecc_step_ds == 0) + /* Not enough information */ + return true; + + /* + * We get the number of corrected bits per page to compare + * the correction density. + */ + corr = (mtd->writesize * ecc->strength) / ecc->size; + ds_corr = (mtd->writesize * chip->ecc_strength_ds) / chip->ecc_step_ds; + + return corr >= ds_corr && ecc->strength >= chip->ecc_strength_ds; +} /** * nand_scan_tail - [NAND Interface] Scan for the NAND device @@ -3990,6 +4047,9 @@ int nand_scan_tail(struct mtd_info *mtd) ecc->layout->oobavail += ecc->layout->oobfree[i].length; mtd->oobavail = ecc->layout->oobavail; + /* ECC sanity check: warn noisily if it's too weak */ + WARN_ON(!nand_ecc_strength_good(mtd)); + /* * Set the number of read / write steps for one page depending on ECC * mode. @@ -4023,8 +4083,16 @@ int nand_scan_tail(struct mtd_info *mtd) chip->pagebuf = -1; /* Large page NAND with SOFT_ECC should support subpage reads */ - if ((ecc->mode == NAND_ECC_SOFT) && (chip->page_shift > 9)) - chip->options |= NAND_SUBPAGE_READ; + switch (ecc->mode) { + case NAND_ECC_SOFT: + case NAND_ECC_SOFT_BCH: + if (chip->page_shift > 9) + chip->options |= NAND_SUBPAGE_READ; + break; + + default: + break; + } /* Fill in remaining MTD driver data */ mtd->type = nand_is_slc(chip) ? MTD_NANDFLASH : MTD_MLCNANDFLASH; diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c index c0615d1526f9..7f0c3b4c2a4f 100644 --- a/drivers/mtd/nand/nand_bbt.c +++ b/drivers/mtd/nand/nand_bbt.c @@ -528,7 +528,7 @@ static int search_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr { struct nand_chip *this = mtd->priv; int i, chips; - int bits, startblock, block, dir; + int startblock, block, dir; int scanlen = mtd->writesize + mtd->oobsize; int bbtblocks; int blocktopage = this->bbt_erase_shift - this->page_shift; @@ -552,9 +552,6 @@ static int search_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr bbtblocks = mtd->size >> this->bbt_erase_shift; } - /* Number of bits for each erase block in the bbt */ - bits = td->options & NAND_BBT_NRBITS_MSK; - for (i = 0; i < chips; i++) { /* Reset version information */ td->version[i] = 0; @@ -1285,6 +1282,7 @@ static int nand_create_badblock_pattern(struct nand_chip *this) int nand_default_bbt(struct mtd_info *mtd) { struct nand_chip *this = mtd->priv; + int ret; /* Is a flash based bad block table requested? */ if (this->bbt_options & NAND_BBT_USE_FLASH) { @@ -1303,8 +1301,11 @@ int nand_default_bbt(struct mtd_info *mtd) this->bbt_md = NULL; } - if (!this->badblock_pattern) - nand_create_badblock_pattern(this); + if (!this->badblock_pattern) { + ret = nand_create_badblock_pattern(this); + if (ret) + return ret; + } return nand_scan_bbt(mtd, this->badblock_pattern); } diff --git a/drivers/mtd/nand/nand_ecc.c b/drivers/mtd/nand/nand_ecc.c index 053c9a2d47c3..97c4c0216c90 100644 --- a/drivers/mtd/nand/nand_ecc.c +++ b/drivers/mtd/nand/nand_ecc.c @@ -506,7 +506,7 @@ int __nand_correct_data(unsigned char *buf, if ((bitsperbyte[b0] + bitsperbyte[b1] + bitsperbyte[b2]) == 1) return 1; /* error in ECC data; no action needed */ - pr_err("%s: uncorrectable ECC error", __func__); + pr_err("%s: uncorrectable ECC error\n", __func__); return -1; } EXPORT_SYMBOL(__nand_correct_data); diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c index 1ff49b80bdaf..f0ed92e210a1 100644 --- a/drivers/mtd/nand/omap2.c +++ b/drivers/mtd/nand/omap2.c @@ -137,6 +137,10 @@ #define BADBLOCK_MARKER_LENGTH 2 #ifdef CONFIG_MTD_NAND_OMAP_BCH +static u_char bch16_vector[] = {0xf5, 0x24, 0x1c, 0xd0, 0x61, 0xb3, 0xf1, 0x55, + 0x2e, 0x2c, 0x86, 0xa3, 0xed, 0x36, 0x1b, 0x78, + 0x48, 0x76, 0xa9, 0x3b, 0x97, 0xd1, 0x7a, 0x93, + 0x07, 0x0e}; static u_char bch8_vector[] = {0xf3, 0xdb, 0x14, 0x16, 0x8b, 0xd2, 0xbe, 0xcc, 0xac, 0x6b, 0xff, 0x99, 0x7b}; static u_char bch4_vector[] = {0x00, 0x6b, 0x31, 0xdd, 0x41, 0xbc, 0x10}; @@ -1114,6 +1118,19 @@ static void __maybe_unused omap_enable_hwecc_bch(struct mtd_info *mtd, int mode) ecc_size1 = BCH_ECC_SIZE1; } break; + case OMAP_ECC_BCH16_CODE_HW: + bch_type = 0x2; + nsectors = chip->ecc.steps; + if (mode == NAND_ECC_READ) { + wr_mode = 0x01; + ecc_size0 = 52; /* ECC bits in nibbles per sector */ + ecc_size1 = 0; /* non-ECC bits in nibbles per sector */ + } else { + wr_mode = 0x01; + ecc_size0 = 0; /* extra bits in nibbles per sector */ + ecc_size1 = 52; /* OOB bits in nibbles per sector */ + } + break; default: return; } @@ -1162,7 +1179,8 @@ static int __maybe_unused omap_calculate_ecc_bch(struct mtd_info *mtd, struct gpmc_nand_regs *gpmc_regs = &info->reg; u8 *ecc_code; unsigned long nsectors, bch_val1, bch_val2, bch_val3, bch_val4; - int i; + u32 val; + int i, j; nsectors = ((readl(info->reg.gpmc_ecc_config) >> 4) & 0x7) + 1; for (i = 0; i < nsectors; i++) { @@ -1201,6 +1219,41 @@ static int __maybe_unused omap_calculate_ecc_bch(struct mtd_info *mtd, *ecc_code++ = ((bch_val1 >> 4) & 0xFF); *ecc_code++ = ((bch_val1 & 0xF) << 4); break; + case OMAP_ECC_BCH16_CODE_HW: + val = readl(gpmc_regs->gpmc_bch_result6[i]); + ecc_code[0] = ((val >> 8) & 0xFF); + ecc_code[1] = ((val >> 0) & 0xFF); + val = readl(gpmc_regs->gpmc_bch_result5[i]); + ecc_code[2] = ((val >> 24) & 0xFF); + ecc_code[3] = ((val >> 16) & 0xFF); + ecc_code[4] = ((val >> 8) & 0xFF); + ecc_code[5] = ((val >> 0) & 0xFF); + val = readl(gpmc_regs->gpmc_bch_result4[i]); + ecc_code[6] = ((val >> 24) & 0xFF); + ecc_code[7] = ((val >> 16) & 0xFF); + ecc_code[8] = ((val >> 8) & 0xFF); + ecc_code[9] = ((val >> 0) & 0xFF); + val = readl(gpmc_regs->gpmc_bch_result3[i]); + ecc_code[10] = ((val >> 24) & 0xFF); + ecc_code[11] = ((val >> 16) & 0xFF); + ecc_code[12] = ((val >> 8) & 0xFF); + ecc_code[13] = ((val >> 0) & 0xFF); + val = readl(gpmc_regs->gpmc_bch_result2[i]); + ecc_code[14] = ((val >> 24) & 0xFF); + ecc_code[15] = ((val >> 16) & 0xFF); + ecc_code[16] = ((val >> 8) & 0xFF); + ecc_code[17] = ((val >> 0) & 0xFF); + val = readl(gpmc_regs->gpmc_bch_result1[i]); + ecc_code[18] = ((val >> 24) & 0xFF); + ecc_code[19] = ((val >> 16) & 0xFF); + ecc_code[20] = ((val >> 8) & 0xFF); + ecc_code[21] = ((val >> 0) & 0xFF); + val = readl(gpmc_regs->gpmc_bch_result0[i]); + ecc_code[22] = ((val >> 24) & 0xFF); + ecc_code[23] = ((val >> 16) & 0xFF); + ecc_code[24] = ((val >> 8) & 0xFF); + ecc_code[25] = ((val >> 0) & 0xFF); + break; default: return -EINVAL; } @@ -1210,8 +1263,8 @@ static int __maybe_unused omap_calculate_ecc_bch(struct mtd_info *mtd, case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW: /* Add constant polynomial to remainder, so that * ECC of blank pages results in 0x0 on reading back */ - for (i = 0; i < eccbytes; i++) - ecc_calc[i] ^= bch4_polynomial[i]; + for (j = 0; j < eccbytes; j++) + ecc_calc[j] ^= bch4_polynomial[j]; break; case OMAP_ECC_BCH4_CODE_HW: /* Set 8th ECC byte as 0x0 for ROM compatibility */ @@ -1220,13 +1273,15 @@ static int __maybe_unused omap_calculate_ecc_bch(struct mtd_info *mtd, case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW: /* Add constant polynomial to remainder, so that * ECC of blank pages results in 0x0 on reading back */ - for (i = 0; i < eccbytes; i++) - ecc_calc[i] ^= bch8_polynomial[i]; + for (j = 0; j < eccbytes; j++) + ecc_calc[j] ^= bch8_polynomial[j]; break; case OMAP_ECC_BCH8_CODE_HW: /* Set 14th ECC byte as 0x0 for ROM compatibility */ ecc_calc[eccbytes - 1] = 0x0; break; + case OMAP_ECC_BCH16_CODE_HW: + break; default: return -EINVAL; } @@ -1237,6 +1292,7 @@ static int __maybe_unused omap_calculate_ecc_bch(struct mtd_info *mtd, return 0; } +#ifdef CONFIG_MTD_NAND_OMAP_BCH /** * erased_sector_bitflips - count bit flips * @data: data sector buffer @@ -1276,7 +1332,6 @@ static int erased_sector_bitflips(u_char *data, u_char *oob, return flip_bits; } -#ifdef CONFIG_MTD_NAND_OMAP_BCH /** * omap_elm_correct_data - corrects page data area in case error reported * @mtd: MTD device structure @@ -1318,6 +1373,10 @@ static int omap_elm_correct_data(struct mtd_info *mtd, u_char *data, actual_eccbytes = ecc->bytes - 1; erased_ecc_vec = bch8_vector; break; + case OMAP_ECC_BCH16_CODE_HW: + actual_eccbytes = ecc->bytes; + erased_ecc_vec = bch16_vector; + break; default: pr_err("invalid driver configuration\n"); return -EINVAL; @@ -1382,7 +1441,7 @@ static int omap_elm_correct_data(struct mtd_info *mtd, u_char *data, /* Check if any error reported */ if (!is_error_reported) - return 0; + return stat; /* Decode BCH error using ELM module */ elm_decode_bch_error_page(info->elm_dev, ecc_vec, err_vec); @@ -1401,6 +1460,7 @@ static int omap_elm_correct_data(struct mtd_info *mtd, u_char *data, BCH4_BIT_PAD; break; case OMAP_ECC_BCH8_CODE_HW: + case OMAP_ECC_BCH16_CODE_HW: pos = err_vec[i].error_loc[j]; break; default: @@ -1912,6 +1972,40 @@ static int omap_nand_probe(struct platform_device *pdev) goto return_error; #endif + case OMAP_ECC_BCH16_CODE_HW: +#ifdef CONFIG_MTD_NAND_OMAP_BCH + pr_info("using OMAP_ECC_BCH16_CODE_HW ECC scheme\n"); + nand_chip->ecc.mode = NAND_ECC_HW; + nand_chip->ecc.size = 512; + nand_chip->ecc.bytes = 26; + nand_chip->ecc.strength = 16; + nand_chip->ecc.hwctl = omap_enable_hwecc_bch; + nand_chip->ecc.correct = omap_elm_correct_data; + nand_chip->ecc.calculate = omap_calculate_ecc_bch; + nand_chip->ecc.read_page = omap_read_page_bch; + nand_chip->ecc.write_page = omap_write_page_bch; + /* This ECC scheme requires ELM H/W block */ + err = is_elm_present(info, pdata->elm_of_node, BCH16_ECC); + if (err < 0) { + pr_err("ELM is required for this ECC scheme\n"); + goto return_error; + } + /* define ECC layout */ + ecclayout->eccbytes = nand_chip->ecc.bytes * + (mtd->writesize / + nand_chip->ecc.size); + oob_index = BADBLOCK_MARKER_LENGTH; + for (i = 0; i < ecclayout->eccbytes; i++, oob_index++) + ecclayout->eccpos[i] = oob_index; + /* reserved marker already included in ecclayout->eccbytes */ + ecclayout->oobfree->offset = + ecclayout->eccpos[ecclayout->eccbytes - 1] + 1; + break; +#else + pr_err("nand: error: CONFIG_MTD_NAND_OMAP_BCH not enabled\n"); + err = -EINVAL; + goto return_error; +#endif default: pr_err("nand: error: invalid or unsupported ECC scheme\n"); err = -EINVAL; diff --git a/drivers/mtd/nand/orion_nand.c b/drivers/mtd/nand/orion_nand.c index dd7fe817eafb..471b4df3a5ac 100644 --- a/drivers/mtd/nand/orion_nand.c +++ b/drivers/mtd/nand/orion_nand.c @@ -214,7 +214,7 @@ static int orion_nand_remove(struct platform_device *pdev) } #ifdef CONFIG_OF -static struct of_device_id orion_nand_of_match_table[] = { +static const struct of_device_id orion_nand_of_match_table[] = { { .compatible = "marvell,orion-nand", }, {}, }; diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c index 7588fe2c127f..96b0b1d27df1 100644 --- a/drivers/mtd/nand/pxa3xx_nand.c +++ b/drivers/mtd/nand/pxa3xx_nand.c @@ -127,10 +127,10 @@ /* macros for registers read/write */ #define nand_writel(info, off, val) \ - __raw_writel((val), (info)->mmio_base + (off)) + writel_relaxed((val), (info)->mmio_base + (off)) #define nand_readl(info, off) \ - __raw_readl((info)->mmio_base + (off)) + readl_relaxed((info)->mmio_base + (off)) /* error code and state */ enum { @@ -337,7 +337,7 @@ static struct nand_ecclayout ecc_layout_4KB_bch8bit = { /* convert nano-seconds to nand flash controller clock cycles */ #define ns2cycle(ns, clk) (int)((ns) * (clk / 1000000) / 1000) -static struct of_device_id pxa3xx_nand_dt_ids[] = { +static const struct of_device_id pxa3xx_nand_dt_ids[] = { { .compatible = "marvell,pxa3xx-nand", .data = (void *)PXA3XX_NAND_VARIANT_PXA, @@ -1354,7 +1354,6 @@ static int pxa_ecc_init(struct pxa3xx_nand_info *info, ecc->mode = NAND_ECC_HW; ecc->size = 512; ecc->strength = 1; - return 1; } else if (strength == 1 && ecc_stepsize == 512 && page_size == 512) { info->chunk_size = 512; @@ -1363,7 +1362,6 @@ static int pxa_ecc_init(struct pxa3xx_nand_info *info, ecc->mode = NAND_ECC_HW; ecc->size = 512; ecc->strength = 1; - return 1; /* * Required ECC: 4-bit correction per 512 bytes @@ -1378,7 +1376,6 @@ static int pxa_ecc_init(struct pxa3xx_nand_info *info, ecc->size = info->chunk_size; ecc->layout = &ecc_layout_2KB_bch4bit; ecc->strength = 16; - return 1; } else if (strength == 4 && ecc_stepsize == 512 && page_size == 4096) { info->ecc_bch = 1; @@ -1389,7 +1386,6 @@ static int pxa_ecc_init(struct pxa3xx_nand_info *info, ecc->size = info->chunk_size; ecc->layout = &ecc_layout_4KB_bch4bit; ecc->strength = 16; - return 1; /* * Required ECC: 8-bit correction per 512 bytes @@ -1404,8 +1400,15 @@ static int pxa_ecc_init(struct pxa3xx_nand_info *info, ecc->size = info->chunk_size; ecc->layout = &ecc_layout_4KB_bch8bit; ecc->strength = 16; - return 1; + } else { + dev_err(&info->pdev->dev, + "ECC strength %d at page size %d is not supported\n", + strength, page_size); + return -ENODEV; } + + dev_info(&info->pdev->dev, "ECC strength %d, ECC step size %d\n", + ecc->strength, ecc->size); return 0; } @@ -1516,8 +1519,13 @@ KEEP_CONFIG: } } - ecc_strength = chip->ecc_strength_ds; - ecc_step = chip->ecc_step_ds; + if (pdata->ecc_strength && pdata->ecc_step_size) { + ecc_strength = pdata->ecc_strength; + ecc_step = pdata->ecc_step_size; + } else { + ecc_strength = chip->ecc_strength_ds; + ecc_step = chip->ecc_step_ds; + } /* Set default ECC strength requirements on non-ONFI devices */ if (ecc_strength < 1 && ecc_step < 1) { @@ -1527,12 +1535,8 @@ KEEP_CONFIG: ret = pxa_ecc_init(info, &chip->ecc, ecc_strength, ecc_step, mtd->writesize); - if (!ret) { - dev_err(&info->pdev->dev, - "ECC strength %d at page size %d is not supported\n", - ecc_strength, mtd->writesize); - return -ENODEV; - } + if (ret) + return ret; /* calculate addressing information */ if (mtd->writesize >= 2048) @@ -1730,6 +1734,14 @@ static int pxa3xx_nand_probe_dt(struct platform_device *pdev) of_property_read_u32(np, "num-cs", &pdata->num_cs); pdata->flash_bbt = of_get_nand_on_flash_bbt(np); + pdata->ecc_strength = of_get_nand_ecc_strength(np); + if (pdata->ecc_strength < 0) + pdata->ecc_strength = 0; + + pdata->ecc_step_size = of_get_nand_ecc_step_size(np); + if (pdata->ecc_step_size < 0) + pdata->ecc_step_size = 0; + pdev->dev.platform_data = pdata; return 0; diff --git a/drivers/mtd/nand/r852.c b/drivers/mtd/nand/r852.c index 325930db3f04..baea83f4dea8 100644 --- a/drivers/mtd/nand/r852.c +++ b/drivers/mtd/nand/r852.c @@ -245,7 +245,7 @@ static void r852_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len) } /* write DWORD chinks - faster */ - while (len) { + while (len >= 4) { reg = buf[0] | buf[1] << 8 | buf[2] << 16 | buf[3] << 24; r852_write_reg_dword(dev, R852_DATALINE, reg); buf += 4; @@ -254,8 +254,10 @@ static void r852_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len) } /* write rest */ - while (len) + while (len > 0) { r852_write_reg(dev, R852_DATALINE, *buf++); + len--; + } } /* diff --git a/drivers/mtd/onenand/samsung.c b/drivers/mtd/onenand/samsung.c index b1a792fd1c23..efb819c3df2f 100644 --- a/drivers/mtd/onenand/samsung.c +++ b/drivers/mtd/onenand/samsung.c @@ -537,9 +537,9 @@ static int onenand_write_bufferram(struct mtd_info *mtd, int area, return 0; } -static int (*s5pc110_dma_ops)(void *dst, void *src, size_t count, int direction); +static int (*s5pc110_dma_ops)(dma_addr_t dst, dma_addr_t src, size_t count, int direction); -static int s5pc110_dma_poll(void *dst, void *src, size_t count, int direction) +static int s5pc110_dma_poll(dma_addr_t dst, dma_addr_t src, size_t count, int direction) { void __iomem *base = onenand->dma_addr; int status; @@ -605,7 +605,7 @@ static irqreturn_t s5pc110_onenand_irq(int irq, void *data) return IRQ_HANDLED; } -static int s5pc110_dma_irq(void *dst, void *src, size_t count, int direction) +static int s5pc110_dma_irq(dma_addr_t dst, dma_addr_t src, size_t count, int direction) { void __iomem *base = onenand->dma_addr; int status; @@ -686,7 +686,7 @@ static int s5pc110_read_bufferram(struct mtd_info *mtd, int area, dev_err(dev, "Couldn't map a %d byte buffer for DMA\n", count); goto normal; } - err = s5pc110_dma_ops((void *) dma_dst, (void *) dma_src, + err = s5pc110_dma_ops(dma_dst, dma_src, count, S5PC110_DMA_DIR_READ); if (page_dma) diff --git a/drivers/mtd/spi-nor/Kconfig b/drivers/mtd/spi-nor/Kconfig new file mode 100644 index 000000000000..f8acfa4310ef --- /dev/null +++ b/drivers/mtd/spi-nor/Kconfig @@ -0,0 +1,17 @@ +menuconfig MTD_SPI_NOR + tristate "SPI-NOR device support" + depends on MTD + help + This is the framework for the SPI NOR which can be used by the SPI + device drivers and the SPI-NOR device driver. + +if MTD_SPI_NOR + +config SPI_FSL_QUADSPI + tristate "Freescale Quad SPI controller" + depends on ARCH_MXC + help + This enables support for the Quad SPI controller in master mode. + We only connect the NOR to this controller now. + +endif # MTD_SPI_NOR diff --git a/drivers/mtd/spi-nor/Makefile b/drivers/mtd/spi-nor/Makefile new file mode 100644 index 000000000000..6a7ce1462247 --- /dev/null +++ b/drivers/mtd/spi-nor/Makefile @@ -0,0 +1,2 @@ +obj-$(CONFIG_MTD_SPI_NOR) += spi-nor.o +obj-$(CONFIG_SPI_FSL_QUADSPI) += fsl-quadspi.o diff --git a/drivers/mtd/spi-nor/fsl-quadspi.c b/drivers/mtd/spi-nor/fsl-quadspi.c new file mode 100644 index 000000000000..8d659a2888d5 --- /dev/null +++ b/drivers/mtd/spi-nor/fsl-quadspi.c @@ -0,0 +1,1009 @@ +/* + * Freescale QuadSPI driver. + * + * Copyright (C) 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/errno.h> +#include <linux/platform_device.h> +#include <linux/sched.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/timer.h> +#include <linux/jiffies.h> +#include <linux/completion.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/spi-nor.h> + +/* The registers */ +#define QUADSPI_MCR 0x00 +#define QUADSPI_MCR_RESERVED_SHIFT 16 +#define QUADSPI_MCR_RESERVED_MASK (0xF << QUADSPI_MCR_RESERVED_SHIFT) +#define QUADSPI_MCR_MDIS_SHIFT 14 +#define QUADSPI_MCR_MDIS_MASK (1 << QUADSPI_MCR_MDIS_SHIFT) +#define QUADSPI_MCR_CLR_TXF_SHIFT 11 +#define QUADSPI_MCR_CLR_TXF_MASK (1 << QUADSPI_MCR_CLR_TXF_SHIFT) +#define QUADSPI_MCR_CLR_RXF_SHIFT 10 +#define QUADSPI_MCR_CLR_RXF_MASK (1 << QUADSPI_MCR_CLR_RXF_SHIFT) +#define QUADSPI_MCR_DDR_EN_SHIFT 7 +#define QUADSPI_MCR_DDR_EN_MASK (1 << QUADSPI_MCR_DDR_EN_SHIFT) +#define QUADSPI_MCR_END_CFG_SHIFT 2 +#define QUADSPI_MCR_END_CFG_MASK (3 << QUADSPI_MCR_END_CFG_SHIFT) +#define QUADSPI_MCR_SWRSTHD_SHIFT 1 +#define QUADSPI_MCR_SWRSTHD_MASK (1 << QUADSPI_MCR_SWRSTHD_SHIFT) +#define QUADSPI_MCR_SWRSTSD_SHIFT 0 +#define QUADSPI_MCR_SWRSTSD_MASK (1 << QUADSPI_MCR_SWRSTSD_SHIFT) + +#define QUADSPI_IPCR 0x08 +#define QUADSPI_IPCR_SEQID_SHIFT 24 +#define QUADSPI_IPCR_SEQID_MASK (0xF << QUADSPI_IPCR_SEQID_SHIFT) + +#define QUADSPI_BUF0CR 0x10 +#define QUADSPI_BUF1CR 0x14 +#define QUADSPI_BUF2CR 0x18 +#define QUADSPI_BUFXCR_INVALID_MSTRID 0xe + +#define QUADSPI_BUF3CR 0x1c +#define QUADSPI_BUF3CR_ALLMST_SHIFT 31 +#define QUADSPI_BUF3CR_ALLMST (1 << QUADSPI_BUF3CR_ALLMST_SHIFT) + +#define QUADSPI_BFGENCR 0x20 +#define QUADSPI_BFGENCR_PAR_EN_SHIFT 16 +#define QUADSPI_BFGENCR_PAR_EN_MASK (1 << (QUADSPI_BFGENCR_PAR_EN_SHIFT)) +#define QUADSPI_BFGENCR_SEQID_SHIFT 12 +#define QUADSPI_BFGENCR_SEQID_MASK (0xF << QUADSPI_BFGENCR_SEQID_SHIFT) + +#define QUADSPI_BUF0IND 0x30 +#define QUADSPI_BUF1IND 0x34 +#define QUADSPI_BUF2IND 0x38 +#define QUADSPI_SFAR 0x100 + +#define QUADSPI_SMPR 0x108 +#define QUADSPI_SMPR_DDRSMP_SHIFT 16 +#define QUADSPI_SMPR_DDRSMP_MASK (7 << QUADSPI_SMPR_DDRSMP_SHIFT) +#define QUADSPI_SMPR_FSDLY_SHIFT 6 +#define QUADSPI_SMPR_FSDLY_MASK (1 << QUADSPI_SMPR_FSDLY_SHIFT) +#define QUADSPI_SMPR_FSPHS_SHIFT 5 +#define QUADSPI_SMPR_FSPHS_MASK (1 << QUADSPI_SMPR_FSPHS_SHIFT) +#define QUADSPI_SMPR_HSENA_SHIFT 0 +#define QUADSPI_SMPR_HSENA_MASK (1 << QUADSPI_SMPR_HSENA_SHIFT) + +#define QUADSPI_RBSR 0x10c +#define QUADSPI_RBSR_RDBFL_SHIFT 8 +#define QUADSPI_RBSR_RDBFL_MASK (0x3F << QUADSPI_RBSR_RDBFL_SHIFT) + +#define QUADSPI_RBCT 0x110 +#define QUADSPI_RBCT_WMRK_MASK 0x1F +#define QUADSPI_RBCT_RXBRD_SHIFT 8 +#define QUADSPI_RBCT_RXBRD_USEIPS (0x1 << QUADSPI_RBCT_RXBRD_SHIFT) + +#define QUADSPI_TBSR 0x150 +#define QUADSPI_TBDR 0x154 +#define QUADSPI_SR 0x15c +#define QUADSPI_SR_IP_ACC_SHIFT 1 +#define QUADSPI_SR_IP_ACC_MASK (0x1 << QUADSPI_SR_IP_ACC_SHIFT) +#define QUADSPI_SR_AHB_ACC_SHIFT 2 +#define QUADSPI_SR_AHB_ACC_MASK (0x1 << QUADSPI_SR_AHB_ACC_SHIFT) + +#define QUADSPI_FR 0x160 +#define QUADSPI_FR_TFF_MASK 0x1 + +#define QUADSPI_SFA1AD 0x180 +#define QUADSPI_SFA2AD 0x184 +#define QUADSPI_SFB1AD 0x188 +#define QUADSPI_SFB2AD 0x18c +#define QUADSPI_RBDR 0x200 + +#define QUADSPI_LUTKEY 0x300 +#define QUADSPI_LUTKEY_VALUE 0x5AF05AF0 + +#define QUADSPI_LCKCR 0x304 +#define QUADSPI_LCKER_LOCK 0x1 +#define QUADSPI_LCKER_UNLOCK 0x2 + +#define QUADSPI_RSER 0x164 +#define QUADSPI_RSER_TFIE (0x1 << 0) + +#define QUADSPI_LUT_BASE 0x310 + +/* + * The definition of the LUT register shows below: + * + * --------------------------------------------------- + * | INSTR1 | PAD1 | OPRND1 | INSTR0 | PAD0 | OPRND0 | + * --------------------------------------------------- + */ +#define OPRND0_SHIFT 0 +#define PAD0_SHIFT 8 +#define INSTR0_SHIFT 10 +#define OPRND1_SHIFT 16 + +/* Instruction set for the LUT register. */ +#define LUT_STOP 0 +#define LUT_CMD 1 +#define LUT_ADDR 2 +#define LUT_DUMMY 3 +#define LUT_MODE 4 +#define LUT_MODE2 5 +#define LUT_MODE4 6 +#define LUT_READ 7 +#define LUT_WRITE 8 +#define LUT_JMP_ON_CS 9 +#define LUT_ADDR_DDR 10 +#define LUT_MODE_DDR 11 +#define LUT_MODE2_DDR 12 +#define LUT_MODE4_DDR 13 +#define LUT_READ_DDR 14 +#define LUT_WRITE_DDR 15 +#define LUT_DATA_LEARN 16 + +/* + * The PAD definitions for LUT register. + * + * The pad stands for the lines number of IO[0:3]. + * For example, the Quad read need four IO lines, so you should + * set LUT_PAD4 which means we use four IO lines. + */ +#define LUT_PAD1 0 +#define LUT_PAD2 1 +#define LUT_PAD4 2 + +/* Oprands for the LUT register. */ +#define ADDR24BIT 0x18 +#define ADDR32BIT 0x20 + +/* Macros for constructing the LUT register. */ +#define LUT0(ins, pad, opr) \ + (((opr) << OPRND0_SHIFT) | ((LUT_##pad) << PAD0_SHIFT) | \ + ((LUT_##ins) << INSTR0_SHIFT)) + +#define LUT1(ins, pad, opr) (LUT0(ins, pad, opr) << OPRND1_SHIFT) + +/* other macros for LUT register. */ +#define QUADSPI_LUT(x) (QUADSPI_LUT_BASE + (x) * 4) +#define QUADSPI_LUT_NUM 64 + +/* SEQID -- we can have 16 seqids at most. */ +#define SEQID_QUAD_READ 0 +#define SEQID_WREN 1 +#define SEQID_WRDI 2 +#define SEQID_RDSR 3 +#define SEQID_SE 4 +#define SEQID_CHIP_ERASE 5 +#define SEQID_PP 6 +#define SEQID_RDID 7 +#define SEQID_WRSR 8 +#define SEQID_RDCR 9 +#define SEQID_EN4B 10 +#define SEQID_BRWR 11 + +enum fsl_qspi_devtype { + FSL_QUADSPI_VYBRID, + FSL_QUADSPI_IMX6SX, +}; + +struct fsl_qspi_devtype_data { + enum fsl_qspi_devtype devtype; + int rxfifo; + int txfifo; +}; + +static struct fsl_qspi_devtype_data vybrid_data = { + .devtype = FSL_QUADSPI_VYBRID, + .rxfifo = 128, + .txfifo = 64 +}; + +static struct fsl_qspi_devtype_data imx6sx_data = { + .devtype = FSL_QUADSPI_IMX6SX, + .rxfifo = 128, + .txfifo = 512 +}; + +#define FSL_QSPI_MAX_CHIP 4 +struct fsl_qspi { + struct mtd_info mtd[FSL_QSPI_MAX_CHIP]; + struct spi_nor nor[FSL_QSPI_MAX_CHIP]; + void __iomem *iobase; + void __iomem *ahb_base; /* Used when read from AHB bus */ + u32 memmap_phy; + struct clk *clk, *clk_en; + struct device *dev; + struct completion c; + struct fsl_qspi_devtype_data *devtype_data; + u32 nor_size; + u32 nor_num; + u32 clk_rate; + unsigned int chip_base_addr; /* We may support two chips. */ +}; + +static inline int is_vybrid_qspi(struct fsl_qspi *q) +{ + return q->devtype_data->devtype == FSL_QUADSPI_VYBRID; +} + +static inline int is_imx6sx_qspi(struct fsl_qspi *q) +{ + return q->devtype_data->devtype == FSL_QUADSPI_IMX6SX; +} + +/* + * An IC bug makes us to re-arrange the 32-bit data. + * The following chips, such as IMX6SLX, have fixed this bug. + */ +static inline u32 fsl_qspi_endian_xchg(struct fsl_qspi *q, u32 a) +{ + return is_vybrid_qspi(q) ? __swab32(a) : a; +} + +static inline void fsl_qspi_unlock_lut(struct fsl_qspi *q) +{ + writel(QUADSPI_LUTKEY_VALUE, q->iobase + QUADSPI_LUTKEY); + writel(QUADSPI_LCKER_UNLOCK, q->iobase + QUADSPI_LCKCR); +} + +static inline void fsl_qspi_lock_lut(struct fsl_qspi *q) +{ + writel(QUADSPI_LUTKEY_VALUE, q->iobase + QUADSPI_LUTKEY); + writel(QUADSPI_LCKER_LOCK, q->iobase + QUADSPI_LCKCR); +} + +static irqreturn_t fsl_qspi_irq_handler(int irq, void *dev_id) +{ + struct fsl_qspi *q = dev_id; + u32 reg; + + /* clear interrupt */ + reg = readl(q->iobase + QUADSPI_FR); + writel(reg, q->iobase + QUADSPI_FR); + + if (reg & QUADSPI_FR_TFF_MASK) + complete(&q->c); + + dev_dbg(q->dev, "QUADSPI_FR : 0x%.8x:0x%.8x\n", q->chip_base_addr, reg); + return IRQ_HANDLED; +} + +static void fsl_qspi_init_lut(struct fsl_qspi *q) +{ + void __iomem *base = q->iobase; + int rxfifo = q->devtype_data->rxfifo; + u32 lut_base; + u8 cmd, addrlen, dummy; + int i; + + fsl_qspi_unlock_lut(q); + + /* Clear all the LUT table */ + for (i = 0; i < QUADSPI_LUT_NUM; i++) + writel(0, base + QUADSPI_LUT_BASE + i * 4); + + /* Quad Read */ + lut_base = SEQID_QUAD_READ * 4; + + if (q->nor_size <= SZ_16M) { + cmd = SPINOR_OP_READ_1_1_4; + addrlen = ADDR24BIT; + dummy = 8; + } else { + /* use the 4-byte address */ + cmd = SPINOR_OP_READ_1_1_4; + addrlen = ADDR32BIT; + dummy = 8; + } + + writel(LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen), + base + QUADSPI_LUT(lut_base)); + writel(LUT0(DUMMY, PAD1, dummy) | LUT1(READ, PAD4, rxfifo), + base + QUADSPI_LUT(lut_base + 1)); + + /* Write enable */ + lut_base = SEQID_WREN * 4; + writel(LUT0(CMD, PAD1, SPINOR_OP_WREN), base + QUADSPI_LUT(lut_base)); + + /* Page Program */ + lut_base = SEQID_PP * 4; + + if (q->nor_size <= SZ_16M) { + cmd = SPINOR_OP_PP; + addrlen = ADDR24BIT; + } else { + /* use the 4-byte address */ + cmd = SPINOR_OP_PP; + addrlen = ADDR32BIT; + } + + writel(LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen), + base + QUADSPI_LUT(lut_base)); + writel(LUT0(WRITE, PAD1, 0), base + QUADSPI_LUT(lut_base + 1)); + + /* Read Status */ + lut_base = SEQID_RDSR * 4; + writel(LUT0(CMD, PAD1, SPINOR_OP_RDSR) | LUT1(READ, PAD1, 0x1), + base + QUADSPI_LUT(lut_base)); + + /* Erase a sector */ + lut_base = SEQID_SE * 4; + + if (q->nor_size <= SZ_16M) { + cmd = SPINOR_OP_SE; + addrlen = ADDR24BIT; + } else { + /* use the 4-byte address */ + cmd = SPINOR_OP_SE; + addrlen = ADDR32BIT; + } + + writel(LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen), + base + QUADSPI_LUT(lut_base)); + + /* Erase the whole chip */ + lut_base = SEQID_CHIP_ERASE * 4; + writel(LUT0(CMD, PAD1, SPINOR_OP_CHIP_ERASE), + base + QUADSPI_LUT(lut_base)); + + /* READ ID */ + lut_base = SEQID_RDID * 4; + writel(LUT0(CMD, PAD1, SPINOR_OP_RDID) | LUT1(READ, PAD1, 0x8), + base + QUADSPI_LUT(lut_base)); + + /* Write Register */ + lut_base = SEQID_WRSR * 4; + writel(LUT0(CMD, PAD1, SPINOR_OP_WRSR) | LUT1(WRITE, PAD1, 0x2), + base + QUADSPI_LUT(lut_base)); + + /* Read Configuration Register */ + lut_base = SEQID_RDCR * 4; + writel(LUT0(CMD, PAD1, SPINOR_OP_RDCR) | LUT1(READ, PAD1, 0x1), + base + QUADSPI_LUT(lut_base)); + + /* Write disable */ + lut_base = SEQID_WRDI * 4; + writel(LUT0(CMD, PAD1, SPINOR_OP_WRDI), base + QUADSPI_LUT(lut_base)); + + /* Enter 4 Byte Mode (Micron) */ + lut_base = SEQID_EN4B * 4; + writel(LUT0(CMD, PAD1, SPINOR_OP_EN4B), base + QUADSPI_LUT(lut_base)); + + /* Enter 4 Byte Mode (Spansion) */ + lut_base = SEQID_BRWR * 4; + writel(LUT0(CMD, PAD1, SPINOR_OP_BRWR), base + QUADSPI_LUT(lut_base)); + + fsl_qspi_lock_lut(q); +} + +/* Get the SEQID for the command */ +static int fsl_qspi_get_seqid(struct fsl_qspi *q, u8 cmd) +{ + switch (cmd) { + case SPINOR_OP_READ_1_1_4: + return SEQID_QUAD_READ; + case SPINOR_OP_WREN: + return SEQID_WREN; + case SPINOR_OP_WRDI: + return SEQID_WRDI; + case SPINOR_OP_RDSR: + return SEQID_RDSR; + case SPINOR_OP_SE: + return SEQID_SE; + case SPINOR_OP_CHIP_ERASE: + return SEQID_CHIP_ERASE; + case SPINOR_OP_PP: + return SEQID_PP; + case SPINOR_OP_RDID: + return SEQID_RDID; + case SPINOR_OP_WRSR: + return SEQID_WRSR; + case SPINOR_OP_RDCR: + return SEQID_RDCR; + case SPINOR_OP_EN4B: + return SEQID_EN4B; + case SPINOR_OP_BRWR: + return SEQID_BRWR; + default: + dev_err(q->dev, "Unsupported cmd 0x%.2x\n", cmd); + break; + } + return -EINVAL; +} + +static int +fsl_qspi_runcmd(struct fsl_qspi *q, u8 cmd, unsigned int addr, int len) +{ + void __iomem *base = q->iobase; + int seqid; + u32 reg, reg2; + int err; + + init_completion(&q->c); + dev_dbg(q->dev, "to 0x%.8x:0x%.8x, len:%d, cmd:%.2x\n", + q->chip_base_addr, addr, len, cmd); + + /* save the reg */ + reg = readl(base + QUADSPI_MCR); + + writel(q->memmap_phy + q->chip_base_addr + addr, base + QUADSPI_SFAR); + writel(QUADSPI_RBCT_WMRK_MASK | QUADSPI_RBCT_RXBRD_USEIPS, + base + QUADSPI_RBCT); + writel(reg | QUADSPI_MCR_CLR_RXF_MASK, base + QUADSPI_MCR); + + do { + reg2 = readl(base + QUADSPI_SR); + if (reg2 & (QUADSPI_SR_IP_ACC_MASK | QUADSPI_SR_AHB_ACC_MASK)) { + udelay(1); + dev_dbg(q->dev, "The controller is busy, 0x%x\n", reg2); + continue; + } + break; + } while (1); + + /* trigger the LUT now */ + seqid = fsl_qspi_get_seqid(q, cmd); + writel((seqid << QUADSPI_IPCR_SEQID_SHIFT) | len, base + QUADSPI_IPCR); + + /* Wait for the interrupt. */ + err = wait_for_completion_timeout(&q->c, msecs_to_jiffies(1000)); + if (!err) { + dev_err(q->dev, + "cmd 0x%.2x timeout, addr@%.8x, FR:0x%.8x, SR:0x%.8x\n", + cmd, addr, readl(base + QUADSPI_FR), + readl(base + QUADSPI_SR)); + err = -ETIMEDOUT; + } else { + err = 0; + } + + /* restore the MCR */ + writel(reg, base + QUADSPI_MCR); + + return err; +} + +/* Read out the data from the QUADSPI_RBDR buffer registers. */ +static void fsl_qspi_read_data(struct fsl_qspi *q, int len, u8 *rxbuf) +{ + u32 tmp; + int i = 0; + + while (len > 0) { + tmp = readl(q->iobase + QUADSPI_RBDR + i * 4); + tmp = fsl_qspi_endian_xchg(q, tmp); + dev_dbg(q->dev, "chip addr:0x%.8x, rcv:0x%.8x\n", + q->chip_base_addr, tmp); + + if (len >= 4) { + *((u32 *)rxbuf) = tmp; + rxbuf += 4; + } else { + memcpy(rxbuf, &tmp, len); + break; + } + + len -= 4; + i++; + } +} + +/* + * If we have changed the content of the flash by writing or erasing, + * we need to invalidate the AHB buffer. If we do not do so, we may read out + * the wrong data. The spec tells us reset the AHB domain and Serial Flash + * domain at the same time. + */ +static inline void fsl_qspi_invalid(struct fsl_qspi *q) +{ + u32 reg; + + reg = readl(q->iobase + QUADSPI_MCR); + reg |= QUADSPI_MCR_SWRSTHD_MASK | QUADSPI_MCR_SWRSTSD_MASK; + writel(reg, q->iobase + QUADSPI_MCR); + + /* + * The minimum delay : 1 AHB + 2 SFCK clocks. + * Delay 1 us is enough. + */ + udelay(1); + + reg &= ~(QUADSPI_MCR_SWRSTHD_MASK | QUADSPI_MCR_SWRSTSD_MASK); + writel(reg, q->iobase + QUADSPI_MCR); +} + +static int fsl_qspi_nor_write(struct fsl_qspi *q, struct spi_nor *nor, + u8 opcode, unsigned int to, u32 *txbuf, + unsigned count, size_t *retlen) +{ + int ret, i, j; + u32 tmp; + + dev_dbg(q->dev, "to 0x%.8x:0x%.8x, len : %d\n", + q->chip_base_addr, to, count); + + /* clear the TX FIFO. */ + tmp = readl(q->iobase + QUADSPI_MCR); + writel(tmp | QUADSPI_MCR_CLR_RXF_MASK, q->iobase + QUADSPI_MCR); + + /* fill the TX data to the FIFO */ + for (j = 0, i = ((count + 3) / 4); j < i; j++) { + tmp = fsl_qspi_endian_xchg(q, *txbuf); + writel(tmp, q->iobase + QUADSPI_TBDR); + txbuf++; + } + + /* Trigger it */ + ret = fsl_qspi_runcmd(q, opcode, to, count); + + if (ret == 0 && retlen) + *retlen += count; + + return ret; +} + +static void fsl_qspi_set_map_addr(struct fsl_qspi *q) +{ + int nor_size = q->nor_size; + void __iomem *base = q->iobase; + + writel(nor_size + q->memmap_phy, base + QUADSPI_SFA1AD); + writel(nor_size * 2 + q->memmap_phy, base + QUADSPI_SFA2AD); + writel(nor_size * 3 + q->memmap_phy, base + QUADSPI_SFB1AD); + writel(nor_size * 4 + q->memmap_phy, base + QUADSPI_SFB2AD); +} + +/* + * There are two different ways to read out the data from the flash: + * the "IP Command Read" and the "AHB Command Read". + * + * The IC guy suggests we use the "AHB Command Read" which is faster + * then the "IP Command Read". (What's more is that there is a bug in + * the "IP Command Read" in the Vybrid.) + * + * After we set up the registers for the "AHB Command Read", we can use + * the memcpy to read the data directly. A "missed" access to the buffer + * causes the controller to clear the buffer, and use the sequence pointed + * by the QUADSPI_BFGENCR[SEQID] to initiate a read from the flash. + */ +static void fsl_qspi_init_abh_read(struct fsl_qspi *q) +{ + void __iomem *base = q->iobase; + int seqid; + + /* AHB configuration for access buffer 0/1/2 .*/ + writel(QUADSPI_BUFXCR_INVALID_MSTRID, base + QUADSPI_BUF0CR); + writel(QUADSPI_BUFXCR_INVALID_MSTRID, base + QUADSPI_BUF1CR); + writel(QUADSPI_BUFXCR_INVALID_MSTRID, base + QUADSPI_BUF2CR); + writel(QUADSPI_BUF3CR_ALLMST, base + QUADSPI_BUF3CR); + + /* We only use the buffer3 */ + writel(0, base + QUADSPI_BUF0IND); + writel(0, base + QUADSPI_BUF1IND); + writel(0, base + QUADSPI_BUF2IND); + + /* Set the default lut sequence for AHB Read. */ + seqid = fsl_qspi_get_seqid(q, q->nor[0].read_opcode); + writel(seqid << QUADSPI_BFGENCR_SEQID_SHIFT, + q->iobase + QUADSPI_BFGENCR); +} + +/* We use this function to do some basic init for spi_nor_scan(). */ +static int fsl_qspi_nor_setup(struct fsl_qspi *q) +{ + void __iomem *base = q->iobase; + u32 reg; + int ret; + + /* the default frequency, we will change it in the future.*/ + ret = clk_set_rate(q->clk, 66000000); + if (ret) + return ret; + + /* Init the LUT table. */ + fsl_qspi_init_lut(q); + + /* Disable the module */ + writel(QUADSPI_MCR_MDIS_MASK | QUADSPI_MCR_RESERVED_MASK, + base + QUADSPI_MCR); + + reg = readl(base + QUADSPI_SMPR); + writel(reg & ~(QUADSPI_SMPR_FSDLY_MASK + | QUADSPI_SMPR_FSPHS_MASK + | QUADSPI_SMPR_HSENA_MASK + | QUADSPI_SMPR_DDRSMP_MASK), base + QUADSPI_SMPR); + + /* Enable the module */ + writel(QUADSPI_MCR_RESERVED_MASK | QUADSPI_MCR_END_CFG_MASK, + base + QUADSPI_MCR); + + /* enable the interrupt */ + writel(QUADSPI_RSER_TFIE, q->iobase + QUADSPI_RSER); + + return 0; +} + +static int fsl_qspi_nor_setup_last(struct fsl_qspi *q) +{ + unsigned long rate = q->clk_rate; + int ret; + + if (is_imx6sx_qspi(q)) + rate *= 4; + + ret = clk_set_rate(q->clk, rate); + if (ret) + return ret; + + /* Init the LUT table again. */ + fsl_qspi_init_lut(q); + + /* Init for AHB read */ + fsl_qspi_init_abh_read(q); + + return 0; +} + +static struct of_device_id fsl_qspi_dt_ids[] = { + { .compatible = "fsl,vf610-qspi", .data = (void *)&vybrid_data, }, + { .compatible = "fsl,imx6sx-qspi", .data = (void *)&imx6sx_data, }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, fsl_qspi_dt_ids); + +static void fsl_qspi_set_base_addr(struct fsl_qspi *q, struct spi_nor *nor) +{ + q->chip_base_addr = q->nor_size * (nor - q->nor); +} + +static int fsl_qspi_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len) +{ + int ret; + struct fsl_qspi *q = nor->priv; + + ret = fsl_qspi_runcmd(q, opcode, 0, len); + if (ret) + return ret; + + fsl_qspi_read_data(q, len, buf); + return 0; +} + +static int fsl_qspi_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len, + int write_enable) +{ + struct fsl_qspi *q = nor->priv; + int ret; + + if (!buf) { + ret = fsl_qspi_runcmd(q, opcode, 0, 1); + if (ret) + return ret; + + if (opcode == SPINOR_OP_CHIP_ERASE) + fsl_qspi_invalid(q); + + } else if (len > 0) { + ret = fsl_qspi_nor_write(q, nor, opcode, 0, + (u32 *)buf, len, NULL); + } else { + dev_err(q->dev, "invalid cmd %d\n", opcode); + ret = -EINVAL; + } + + return ret; +} + +static void fsl_qspi_write(struct spi_nor *nor, loff_t to, + size_t len, size_t *retlen, const u_char *buf) +{ + struct fsl_qspi *q = nor->priv; + + fsl_qspi_nor_write(q, nor, nor->program_opcode, to, + (u32 *)buf, len, retlen); + + /* invalid the data in the AHB buffer. */ + fsl_qspi_invalid(q); +} + +static int fsl_qspi_read(struct spi_nor *nor, loff_t from, + size_t len, size_t *retlen, u_char *buf) +{ + struct fsl_qspi *q = nor->priv; + u8 cmd = nor->read_opcode; + int ret; + + dev_dbg(q->dev, "cmd [%x],read from (0x%p, 0x%.8x, 0x%.8x),len:%d\n", + cmd, q->ahb_base, q->chip_base_addr, (unsigned int)from, len); + + /* Wait until the previous command is finished. */ + ret = nor->wait_till_ready(nor); + if (ret) + return ret; + + /* Read out the data directly from the AHB buffer.*/ + memcpy(buf, q->ahb_base + q->chip_base_addr + from, len); + + *retlen += len; + return 0; +} + +static int fsl_qspi_erase(struct spi_nor *nor, loff_t offs) +{ + struct fsl_qspi *q = nor->priv; + int ret; + + dev_dbg(nor->dev, "%dKiB at 0x%08x:0x%08x\n", + nor->mtd->erasesize / 1024, q->chip_base_addr, (u32)offs); + + /* Wait until finished previous write command. */ + ret = nor->wait_till_ready(nor); + if (ret) + return ret; + + /* Send write enable, then erase commands. */ + ret = nor->write_reg(nor, SPINOR_OP_WREN, NULL, 0, 0); + if (ret) + return ret; + + ret = fsl_qspi_runcmd(q, nor->erase_opcode, offs, 0); + if (ret) + return ret; + + fsl_qspi_invalid(q); + return 0; +} + +static int fsl_qspi_prep(struct spi_nor *nor, enum spi_nor_ops ops) +{ + struct fsl_qspi *q = nor->priv; + int ret; + + ret = clk_enable(q->clk_en); + if (ret) + return ret; + + ret = clk_enable(q->clk); + if (ret) { + clk_disable(q->clk_en); + return ret; + } + + fsl_qspi_set_base_addr(q, nor); + return 0; +} + +static void fsl_qspi_unprep(struct spi_nor *nor, enum spi_nor_ops ops) +{ + struct fsl_qspi *q = nor->priv; + + clk_disable(q->clk); + clk_disable(q->clk_en); +} + +static int fsl_qspi_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct mtd_part_parser_data ppdata; + struct device *dev = &pdev->dev; + struct fsl_qspi *q; + struct resource *res; + struct spi_nor *nor; + struct mtd_info *mtd; + int ret, i = 0; + bool has_second_chip = false; + const struct of_device_id *of_id = + of_match_device(fsl_qspi_dt_ids, &pdev->dev); + + q = devm_kzalloc(dev, sizeof(*q), GFP_KERNEL); + if (!q) + return -ENOMEM; + + q->nor_num = of_get_child_count(dev->of_node); + if (!q->nor_num || q->nor_num > FSL_QSPI_MAX_CHIP) + return -ENODEV; + + /* find the resources */ + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "QuadSPI"); + q->iobase = devm_ioremap_resource(dev, res); + if (IS_ERR(q->iobase)) { + ret = PTR_ERR(q->iobase); + goto map_failed; + } + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + "QuadSPI-memory"); + q->ahb_base = devm_ioremap_resource(dev, res); + if (IS_ERR(q->ahb_base)) { + ret = PTR_ERR(q->ahb_base); + goto map_failed; + } + q->memmap_phy = res->start; + + /* find the clocks */ + q->clk_en = devm_clk_get(dev, "qspi_en"); + if (IS_ERR(q->clk_en)) { + ret = PTR_ERR(q->clk_en); + goto map_failed; + } + + q->clk = devm_clk_get(dev, "qspi"); + if (IS_ERR(q->clk)) { + ret = PTR_ERR(q->clk); + goto map_failed; + } + + ret = clk_prepare_enable(q->clk_en); + if (ret) { + dev_err(dev, "can not enable the qspi_en clock\n"); + goto map_failed; + } + + ret = clk_prepare_enable(q->clk); + if (ret) { + clk_disable_unprepare(q->clk_en); + dev_err(dev, "can not enable the qspi clock\n"); + goto map_failed; + } + + /* find the irq */ + ret = platform_get_irq(pdev, 0); + if (ret < 0) { + dev_err(dev, "failed to get the irq\n"); + goto irq_failed; + } + + ret = devm_request_irq(dev, ret, + fsl_qspi_irq_handler, 0, pdev->name, q); + if (ret) { + dev_err(dev, "failed to request irq.\n"); + goto irq_failed; + } + + q->dev = dev; + q->devtype_data = (struct fsl_qspi_devtype_data *)of_id->data; + platform_set_drvdata(pdev, q); + + ret = fsl_qspi_nor_setup(q); + if (ret) + goto irq_failed; + + if (of_get_property(np, "fsl,qspi-has-second-chip", NULL)) + has_second_chip = true; + + /* iterate the subnodes. */ + for_each_available_child_of_node(dev->of_node, np) { + const struct spi_device_id *id; + char modalias[40]; + + /* skip the holes */ + if (!has_second_chip) + i *= 2; + + nor = &q->nor[i]; + mtd = &q->mtd[i]; + + nor->mtd = mtd; + nor->dev = dev; + nor->priv = q; + mtd->priv = nor; + + /* fill the hooks */ + nor->read_reg = fsl_qspi_read_reg; + nor->write_reg = fsl_qspi_write_reg; + nor->read = fsl_qspi_read; + nor->write = fsl_qspi_write; + nor->erase = fsl_qspi_erase; + + nor->prepare = fsl_qspi_prep; + nor->unprepare = fsl_qspi_unprep; + + if (of_modalias_node(np, modalias, sizeof(modalias)) < 0) + goto map_failed; + + id = spi_nor_match_id(modalias); + if (!id) + goto map_failed; + + ret = of_property_read_u32(np, "spi-max-frequency", + &q->clk_rate); + if (ret < 0) + goto map_failed; + + /* set the chip address for READID */ + fsl_qspi_set_base_addr(q, nor); + + ret = spi_nor_scan(nor, id, SPI_NOR_QUAD); + if (ret) + goto map_failed; + + ppdata.of_node = np; + ret = mtd_device_parse_register(mtd, NULL, &ppdata, NULL, 0); + if (ret) + goto map_failed; + + /* Set the correct NOR size now. */ + if (q->nor_size == 0) { + q->nor_size = mtd->size; + + /* Map the SPI NOR to accessiable address */ + fsl_qspi_set_map_addr(q); + } + + /* + * The TX FIFO is 64 bytes in the Vybrid, but the Page Program + * may writes 265 bytes per time. The write is working in the + * unit of the TX FIFO, not in the unit of the SPI NOR's page + * size. + * + * So shrink the spi_nor->page_size if it is larger then the + * TX FIFO. + */ + if (nor->page_size > q->devtype_data->txfifo) + nor->page_size = q->devtype_data->txfifo; + + i++; + } + + /* finish the rest init. */ + ret = fsl_qspi_nor_setup_last(q); + if (ret) + goto last_init_failed; + + clk_disable(q->clk); + clk_disable(q->clk_en); + dev_info(dev, "QuadSPI SPI NOR flash driver\n"); + return 0; + +last_init_failed: + for (i = 0; i < q->nor_num; i++) + mtd_device_unregister(&q->mtd[i]); + +irq_failed: + clk_disable_unprepare(q->clk); + clk_disable_unprepare(q->clk_en); +map_failed: + dev_err(dev, "Freescale QuadSPI probe failed\n"); + return ret; +} + +static int fsl_qspi_remove(struct platform_device *pdev) +{ + struct fsl_qspi *q = platform_get_drvdata(pdev); + int i; + + for (i = 0; i < q->nor_num; i++) + mtd_device_unregister(&q->mtd[i]); + + /* disable the hardware */ + writel(QUADSPI_MCR_MDIS_MASK, q->iobase + QUADSPI_MCR); + writel(0x0, q->iobase + QUADSPI_RSER); + + clk_unprepare(q->clk); + clk_unprepare(q->clk_en); + return 0; +} + +static struct platform_driver fsl_qspi_driver = { + .driver = { + .name = "fsl-quadspi", + .bus = &platform_bus_type, + .owner = THIS_MODULE, + .of_match_table = fsl_qspi_dt_ids, + }, + .probe = fsl_qspi_probe, + .remove = fsl_qspi_remove, +}; +module_platform_driver(fsl_qspi_driver); + +MODULE_DESCRIPTION("Freescale QuadSPI Controller Driver"); +MODULE_AUTHOR("Freescale Semiconductor Inc."); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c new file mode 100644 index 000000000000..c713c8656710 --- /dev/null +++ b/drivers/mtd/spi-nor/spi-nor.c @@ -0,0 +1,1107 @@ +/* + * Based on m25p80.c, by Mike Lavender (mike@steroidmicros.com), with + * influence from lart.c (Abraham Van Der Merwe) and mtd_dataflash.c + * + * Copyright (C) 2005, Intec Automation Inc. + * Copyright (C) 2014, Freescale Semiconductor, Inc. + * + * This code is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/err.h> +#include <linux/errno.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/mutex.h> +#include <linux/math64.h> + +#include <linux/mtd/cfi.h> +#include <linux/mtd/mtd.h> +#include <linux/of_platform.h> +#include <linux/spi/flash.h> +#include <linux/mtd/spi-nor.h> + +/* Define max times to check status register before we give up. */ +#define MAX_READY_WAIT_JIFFIES (40 * HZ) /* M25P16 specs 40s max chip erase */ + +#define JEDEC_MFR(_jedec_id) ((_jedec_id) >> 16) + +/* + * Read the status register, returning its value in the location + * Return the status register value. + * Returns negative if error occurred. + */ +static int read_sr(struct spi_nor *nor) +{ + int ret; + u8 val; + + ret = nor->read_reg(nor, SPINOR_OP_RDSR, &val, 1); + if (ret < 0) { + pr_err("error %d reading SR\n", (int) ret); + return ret; + } + + return val; +} + +/* + * Read configuration register, returning its value in the + * location. Return the configuration register value. + * Returns negative if error occured. + */ +static int read_cr(struct spi_nor *nor) +{ + int ret; + u8 val; + + ret = nor->read_reg(nor, SPINOR_OP_RDCR, &val, 1); + if (ret < 0) { + dev_err(nor->dev, "error %d reading CR\n", ret); + return ret; + } + + return val; +} + +/* + * Dummy Cycle calculation for different type of read. + * It can be used to support more commands with + * different dummy cycle requirements. + */ +static inline int spi_nor_read_dummy_cycles(struct spi_nor *nor) +{ + switch (nor->flash_read) { + case SPI_NOR_FAST: + case SPI_NOR_DUAL: + case SPI_NOR_QUAD: + return 1; + case SPI_NOR_NORMAL: + return 0; + } + return 0; +} + +/* + * Write status register 1 byte + * Returns negative if error occurred. + */ +static inline int write_sr(struct spi_nor *nor, u8 val) +{ + nor->cmd_buf[0] = val; + return nor->write_reg(nor, SPINOR_OP_WRSR, nor->cmd_buf, 1, 0); +} + +/* + * Set write enable latch with Write Enable command. + * Returns negative if error occurred. + */ +static inline int write_enable(struct spi_nor *nor) +{ + return nor->write_reg(nor, SPINOR_OP_WREN, NULL, 0, 0); +} + +/* + * Send write disble instruction to the chip. + */ +static inline int write_disable(struct spi_nor *nor) +{ + return nor->write_reg(nor, SPINOR_OP_WRDI, NULL, 0, 0); +} + +static inline struct spi_nor *mtd_to_spi_nor(struct mtd_info *mtd) +{ + return mtd->priv; +} + +/* Enable/disable 4-byte addressing mode. */ +static inline int set_4byte(struct spi_nor *nor, u32 jedec_id, int enable) +{ + int status; + bool need_wren = false; + u8 cmd; + + switch (JEDEC_MFR(jedec_id)) { + case CFI_MFR_ST: /* Micron, actually */ + /* Some Micron need WREN command; all will accept it */ + need_wren = true; + case CFI_MFR_MACRONIX: + case 0xEF /* winbond */: + if (need_wren) + write_enable(nor); + + cmd = enable ? SPINOR_OP_EN4B : SPINOR_OP_EX4B; + status = nor->write_reg(nor, cmd, NULL, 0, 0); + if (need_wren) + write_disable(nor); + + return status; + default: + /* Spansion style */ + nor->cmd_buf[0] = enable << 7; + return nor->write_reg(nor, SPINOR_OP_BRWR, nor->cmd_buf, 1, 0); + } +} + +static int spi_nor_wait_till_ready(struct spi_nor *nor) +{ + unsigned long deadline; + int sr; + + deadline = jiffies + MAX_READY_WAIT_JIFFIES; + + do { + cond_resched(); + + sr = read_sr(nor); + if (sr < 0) + break; + else if (!(sr & SR_WIP)) + return 0; + } while (!time_after_eq(jiffies, deadline)); + + return -ETIMEDOUT; +} + +/* + * Service routine to read status register until ready, or timeout occurs. + * Returns non-zero if error. + */ +static int wait_till_ready(struct spi_nor *nor) +{ + return nor->wait_till_ready(nor); +} + +/* + * Erase the whole flash memory + * + * Returns 0 if successful, non-zero otherwise. + */ +static int erase_chip(struct spi_nor *nor) +{ + int ret; + + dev_dbg(nor->dev, " %lldKiB\n", (long long)(nor->mtd->size >> 10)); + + /* Wait until finished previous write command. */ + ret = wait_till_ready(nor); + if (ret) + return ret; + + /* Send write enable, then erase commands. */ + write_enable(nor); + + return nor->write_reg(nor, SPINOR_OP_CHIP_ERASE, NULL, 0, 0); +} + +static int spi_nor_lock_and_prep(struct spi_nor *nor, enum spi_nor_ops ops) +{ + int ret = 0; + + mutex_lock(&nor->lock); + + if (nor->prepare) { + ret = nor->prepare(nor, ops); + if (ret) { + dev_err(nor->dev, "failed in the preparation.\n"); + mutex_unlock(&nor->lock); + return ret; + } + } + return ret; +} + +static void spi_nor_unlock_and_unprep(struct spi_nor *nor, enum spi_nor_ops ops) +{ + if (nor->unprepare) + nor->unprepare(nor, ops); + mutex_unlock(&nor->lock); +} + +/* + * Erase an address range on the nor chip. The address range may extend + * one or more erase sectors. Return an error is there is a problem erasing. + */ +static int spi_nor_erase(struct mtd_info *mtd, struct erase_info *instr) +{ + struct spi_nor *nor = mtd_to_spi_nor(mtd); + u32 addr, len; + uint32_t rem; + int ret; + + dev_dbg(nor->dev, "at 0x%llx, len %lld\n", (long long)instr->addr, + (long long)instr->len); + + div_u64_rem(instr->len, mtd->erasesize, &rem); + if (rem) + return -EINVAL; + + addr = instr->addr; + len = instr->len; + + ret = spi_nor_lock_and_prep(nor, SPI_NOR_OPS_ERASE); + if (ret) + return ret; + + /* whole-chip erase? */ + if (len == mtd->size) { + if (erase_chip(nor)) { + ret = -EIO; + goto erase_err; + } + + /* REVISIT in some cases we could speed up erasing large regions + * by using SPINOR_OP_SE instead of SPINOR_OP_BE_4K. We may have set up + * to use "small sector erase", but that's not always optimal. + */ + + /* "sector"-at-a-time erase */ + } else { + while (len) { + if (nor->erase(nor, addr)) { + ret = -EIO; + goto erase_err; + } + + addr += mtd->erasesize; + len -= mtd->erasesize; + } + } + + spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_ERASE); + + instr->state = MTD_ERASE_DONE; + mtd_erase_callback(instr); + + return ret; + +erase_err: + spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_ERASE); + instr->state = MTD_ERASE_FAILED; + return ret; +} + +static int spi_nor_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len) +{ + struct spi_nor *nor = mtd_to_spi_nor(mtd); + uint32_t offset = ofs; + uint8_t status_old, status_new; + int ret = 0; + + ret = spi_nor_lock_and_prep(nor, SPI_NOR_OPS_LOCK); + if (ret) + return ret; + + /* Wait until finished previous command */ + ret = wait_till_ready(nor); + if (ret) + goto err; + + status_old = read_sr(nor); + + if (offset < mtd->size - (mtd->size / 2)) + status_new = status_old | SR_BP2 | SR_BP1 | SR_BP0; + else if (offset < mtd->size - (mtd->size / 4)) + status_new = (status_old & ~SR_BP0) | SR_BP2 | SR_BP1; + else if (offset < mtd->size - (mtd->size / 8)) + status_new = (status_old & ~SR_BP1) | SR_BP2 | SR_BP0; + else if (offset < mtd->size - (mtd->size / 16)) + status_new = (status_old & ~(SR_BP0 | SR_BP1)) | SR_BP2; + else if (offset < mtd->size - (mtd->size / 32)) + status_new = (status_old & ~SR_BP2) | SR_BP1 | SR_BP0; + else if (offset < mtd->size - (mtd->size / 64)) + status_new = (status_old & ~(SR_BP2 | SR_BP0)) | SR_BP1; + else + status_new = (status_old & ~(SR_BP2 | SR_BP1)) | SR_BP0; + + /* Only modify protection if it will not unlock other areas */ + if ((status_new & (SR_BP2 | SR_BP1 | SR_BP0)) > + (status_old & (SR_BP2 | SR_BP1 | SR_BP0))) { + write_enable(nor); + ret = write_sr(nor, status_new); + if (ret) + goto err; + } + +err: + spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_LOCK); + return ret; +} + +static int spi_nor_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len) +{ + struct spi_nor *nor = mtd_to_spi_nor(mtd); + uint32_t offset = ofs; + uint8_t status_old, status_new; + int ret = 0; + + ret = spi_nor_lock_and_prep(nor, SPI_NOR_OPS_UNLOCK); + if (ret) + return ret; + + /* Wait until finished previous command */ + ret = wait_till_ready(nor); + if (ret) + goto err; + + status_old = read_sr(nor); + + if (offset+len > mtd->size - (mtd->size / 64)) + status_new = status_old & ~(SR_BP2 | SR_BP1 | SR_BP0); + else if (offset+len > mtd->size - (mtd->size / 32)) + status_new = (status_old & ~(SR_BP2 | SR_BP1)) | SR_BP0; + else if (offset+len > mtd->size - (mtd->size / 16)) + status_new = (status_old & ~(SR_BP2 | SR_BP0)) | SR_BP1; + else if (offset+len > mtd->size - (mtd->size / 8)) + status_new = (status_old & ~SR_BP2) | SR_BP1 | SR_BP0; + else if (offset+len > mtd->size - (mtd->size / 4)) + status_new = (status_old & ~(SR_BP0 | SR_BP1)) | SR_BP2; + else if (offset+len > mtd->size - (mtd->size / 2)) + status_new = (status_old & ~SR_BP1) | SR_BP2 | SR_BP0; + else + status_new = (status_old & ~SR_BP0) | SR_BP2 | SR_BP1; + + /* Only modify protection if it will not lock other areas */ + if ((status_new & (SR_BP2 | SR_BP1 | SR_BP0)) < + (status_old & (SR_BP2 | SR_BP1 | SR_BP0))) { + write_enable(nor); + ret = write_sr(nor, status_new); + if (ret) + goto err; + } + +err: + spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_UNLOCK); + return ret; +} + +struct flash_info { + /* JEDEC id zero means "no ID" (most older chips); otherwise it has + * a high byte of zero plus three data bytes: the manufacturer id, + * then a two byte device id. + */ + u32 jedec_id; + u16 ext_id; + + /* The size listed here is what works with SPINOR_OP_SE, which isn't + * necessarily called a "sector" by the vendor. + */ + unsigned sector_size; + u16 n_sectors; + + u16 page_size; + u16 addr_width; + + u16 flags; +#define SECT_4K 0x01 /* SPINOR_OP_BE_4K works uniformly */ +#define SPI_NOR_NO_ERASE 0x02 /* No erase command needed */ +#define SST_WRITE 0x04 /* use SST byte programming */ +#define SPI_NOR_NO_FR 0x08 /* Can't do fastread */ +#define SECT_4K_PMC 0x10 /* SPINOR_OP_BE_4K_PMC works uniformly */ +#define SPI_NOR_DUAL_READ 0x20 /* Flash supports Dual Read */ +#define SPI_NOR_QUAD_READ 0x40 /* Flash supports Quad Read */ +}; + +#define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags) \ + ((kernel_ulong_t)&(struct flash_info) { \ + .jedec_id = (_jedec_id), \ + .ext_id = (_ext_id), \ + .sector_size = (_sector_size), \ + .n_sectors = (_n_sectors), \ + .page_size = 256, \ + .flags = (_flags), \ + }) + +#define CAT25_INFO(_sector_size, _n_sectors, _page_size, _addr_width, _flags) \ + ((kernel_ulong_t)&(struct flash_info) { \ + .sector_size = (_sector_size), \ + .n_sectors = (_n_sectors), \ + .page_size = (_page_size), \ + .addr_width = (_addr_width), \ + .flags = (_flags), \ + }) + +/* NOTE: double check command sets and memory organization when you add + * more nor chips. This current list focusses on newer chips, which + * have been converging on command sets which including JEDEC ID. + */ +const struct spi_device_id spi_nor_ids[] = { + /* Atmel -- some are (confusingly) marketed as "DataFlash" */ + { "at25fs010", INFO(0x1f6601, 0, 32 * 1024, 4, SECT_4K) }, + { "at25fs040", INFO(0x1f6604, 0, 64 * 1024, 8, SECT_4K) }, + + { "at25df041a", INFO(0x1f4401, 0, 64 * 1024, 8, SECT_4K) }, + { "at25df321a", INFO(0x1f4701, 0, 64 * 1024, 64, SECT_4K) }, + { "at25df641", INFO(0x1f4800, 0, 64 * 1024, 128, SECT_4K) }, + + { "at26f004", INFO(0x1f0400, 0, 64 * 1024, 8, SECT_4K) }, + { "at26df081a", INFO(0x1f4501, 0, 64 * 1024, 16, SECT_4K) }, + { "at26df161a", INFO(0x1f4601, 0, 64 * 1024, 32, SECT_4K) }, + { "at26df321", INFO(0x1f4700, 0, 64 * 1024, 64, SECT_4K) }, + + { "at45db081d", INFO(0x1f2500, 0, 64 * 1024, 16, SECT_4K) }, + + /* EON -- en25xxx */ + { "en25f32", INFO(0x1c3116, 0, 64 * 1024, 64, SECT_4K) }, + { "en25p32", INFO(0x1c2016, 0, 64 * 1024, 64, 0) }, + { "en25q32b", INFO(0x1c3016, 0, 64 * 1024, 64, 0) }, + { "en25p64", INFO(0x1c2017, 0, 64 * 1024, 128, 0) }, + { "en25q64", INFO(0x1c3017, 0, 64 * 1024, 128, SECT_4K) }, + { "en25qh256", INFO(0x1c7019, 0, 64 * 1024, 512, 0) }, + + /* ESMT */ + { "f25l32pa", INFO(0x8c2016, 0, 64 * 1024, 64, SECT_4K) }, + + /* Everspin */ + { "mr25h256", CAT25_INFO( 32 * 1024, 1, 256, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) }, + { "mr25h10", CAT25_INFO(128 * 1024, 1, 256, 3, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) }, + + /* GigaDevice */ + { "gd25q32", INFO(0xc84016, 0, 64 * 1024, 64, SECT_4K) }, + { "gd25q64", INFO(0xc84017, 0, 64 * 1024, 128, SECT_4K) }, + + /* Intel/Numonyx -- xxxs33b */ + { "160s33b", INFO(0x898911, 0, 64 * 1024, 32, 0) }, + { "320s33b", INFO(0x898912, 0, 64 * 1024, 64, 0) }, + { "640s33b", INFO(0x898913, 0, 64 * 1024, 128, 0) }, + + /* Macronix */ + { "mx25l2005a", INFO(0xc22012, 0, 64 * 1024, 4, SECT_4K) }, + { "mx25l4005a", INFO(0xc22013, 0, 64 * 1024, 8, SECT_4K) }, + { "mx25l8005", INFO(0xc22014, 0, 64 * 1024, 16, 0) }, + { "mx25l1606e", INFO(0xc22015, 0, 64 * 1024, 32, SECT_4K) }, + { "mx25l3205d", INFO(0xc22016, 0, 64 * 1024, 64, 0) }, + { "mx25l3255e", INFO(0xc29e16, 0, 64 * 1024, 64, SECT_4K) }, + { "mx25l6405d", INFO(0xc22017, 0, 64 * 1024, 128, 0) }, + { "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) }, + { "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) }, + { "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, 0) }, + { "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) }, + { "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, SPI_NOR_QUAD_READ) }, + { "mx66l1g55g", INFO(0xc2261b, 0, 64 * 1024, 2048, SPI_NOR_QUAD_READ) }, + + /* Micron */ + { "n25q064", INFO(0x20ba17, 0, 64 * 1024, 128, 0) }, + { "n25q128a11", INFO(0x20bb18, 0, 64 * 1024, 256, 0) }, + { "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256, 0) }, + { "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512, SECT_4K) }, + { "n25q512a", INFO(0x20bb20, 0, 64 * 1024, 1024, SECT_4K) }, + + /* PMC */ + { "pm25lv512", INFO(0, 0, 32 * 1024, 2, SECT_4K_PMC) }, + { "pm25lv010", INFO(0, 0, 32 * 1024, 4, SECT_4K_PMC) }, + { "pm25lq032", INFO(0x7f9d46, 0, 64 * 1024, 64, SECT_4K) }, + + /* Spansion -- single (large) sector size only, at least + * for the chips listed here (without boot sectors). + */ + { "s25sl032p", INFO(0x010215, 0x4d00, 64 * 1024, 64, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, + { "s25sl064p", INFO(0x010216, 0x4d00, 64 * 1024, 128, 0) }, + { "s25fl256s0", INFO(0x010219, 0x4d00, 256 * 1024, 128, 0) }, + { "s25fl256s1", INFO(0x010219, 0x4d01, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, + { "s25fl512s", INFO(0x010220, 0x4d00, 256 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, + { "s70fl01gs", INFO(0x010221, 0x4d00, 256 * 1024, 256, 0) }, + { "s25sl12800", INFO(0x012018, 0x0300, 256 * 1024, 64, 0) }, + { "s25sl12801", INFO(0x012018, 0x0301, 64 * 1024, 256, 0) }, + { "s25fl129p0", INFO(0x012018, 0x4d00, 256 * 1024, 64, 0) }, + { "s25fl129p1", INFO(0x012018, 0x4d01, 64 * 1024, 256, 0) }, + { "s25sl004a", INFO(0x010212, 0, 64 * 1024, 8, 0) }, + { "s25sl008a", INFO(0x010213, 0, 64 * 1024, 16, 0) }, + { "s25sl016a", INFO(0x010214, 0, 64 * 1024, 32, 0) }, + { "s25sl032a", INFO(0x010215, 0, 64 * 1024, 64, 0) }, + { "s25sl064a", INFO(0x010216, 0, 64 * 1024, 128, 0) }, + { "s25fl008k", INFO(0xef4014, 0, 64 * 1024, 16, SECT_4K) }, + { "s25fl016k", INFO(0xef4015, 0, 64 * 1024, 32, SECT_4K) }, + { "s25fl064k", INFO(0xef4017, 0, 64 * 1024, 128, SECT_4K) }, + + /* SST -- large erase sizes are "overlays", "sectors" are 4K */ + { "sst25vf040b", INFO(0xbf258d, 0, 64 * 1024, 8, SECT_4K | SST_WRITE) }, + { "sst25vf080b", INFO(0xbf258e, 0, 64 * 1024, 16, SECT_4K | SST_WRITE) }, + { "sst25vf016b", INFO(0xbf2541, 0, 64 * 1024, 32, SECT_4K | SST_WRITE) }, + { "sst25vf032b", INFO(0xbf254a, 0, 64 * 1024, 64, SECT_4K | SST_WRITE) }, + { "sst25vf064c", INFO(0xbf254b, 0, 64 * 1024, 128, SECT_4K) }, + { "sst25wf512", INFO(0xbf2501, 0, 64 * 1024, 1, SECT_4K | SST_WRITE) }, + { "sst25wf010", INFO(0xbf2502, 0, 64 * 1024, 2, SECT_4K | SST_WRITE) }, + { "sst25wf020", INFO(0xbf2503, 0, 64 * 1024, 4, SECT_4K | SST_WRITE) }, + { "sst25wf040", INFO(0xbf2504, 0, 64 * 1024, 8, SECT_4K | SST_WRITE) }, + + /* ST Microelectronics -- newer production may have feature updates */ + { "m25p05", INFO(0x202010, 0, 32 * 1024, 2, 0) }, + { "m25p10", INFO(0x202011, 0, 32 * 1024, 4, 0) }, + { "m25p20", INFO(0x202012, 0, 64 * 1024, 4, 0) }, + { "m25p40", INFO(0x202013, 0, 64 * 1024, 8, 0) }, + { "m25p80", INFO(0x202014, 0, 64 * 1024, 16, 0) }, + { "m25p16", INFO(0x202015, 0, 64 * 1024, 32, 0) }, + { "m25p32", INFO(0x202016, 0, 64 * 1024, 64, 0) }, + { "m25p64", INFO(0x202017, 0, 64 * 1024, 128, 0) }, + { "m25p128", INFO(0x202018, 0, 256 * 1024, 64, 0) }, + { "n25q032", INFO(0x20ba16, 0, 64 * 1024, 64, 0) }, + + { "m25p05-nonjedec", INFO(0, 0, 32 * 1024, 2, 0) }, + { "m25p10-nonjedec", INFO(0, 0, 32 * 1024, 4, 0) }, + { "m25p20-nonjedec", INFO(0, 0, 64 * 1024, 4, 0) }, + { "m25p40-nonjedec", INFO(0, 0, 64 * 1024, 8, 0) }, + { "m25p80-nonjedec", INFO(0, 0, 64 * 1024, 16, 0) }, + { "m25p16-nonjedec", INFO(0, 0, 64 * 1024, 32, 0) }, + { "m25p32-nonjedec", INFO(0, 0, 64 * 1024, 64, 0) }, + { "m25p64-nonjedec", INFO(0, 0, 64 * 1024, 128, 0) }, + { "m25p128-nonjedec", INFO(0, 0, 256 * 1024, 64, 0) }, + + { "m45pe10", INFO(0x204011, 0, 64 * 1024, 2, 0) }, + { "m45pe80", INFO(0x204014, 0, 64 * 1024, 16, 0) }, + { "m45pe16", INFO(0x204015, 0, 64 * 1024, 32, 0) }, + + { "m25pe20", INFO(0x208012, 0, 64 * 1024, 4, 0) }, + { "m25pe80", INFO(0x208014, 0, 64 * 1024, 16, 0) }, + { "m25pe16", INFO(0x208015, 0, 64 * 1024, 32, SECT_4K) }, + + { "m25px16", INFO(0x207115, 0, 64 * 1024, 32, SECT_4K) }, + { "m25px32", INFO(0x207116, 0, 64 * 1024, 64, SECT_4K) }, + { "m25px32-s0", INFO(0x207316, 0, 64 * 1024, 64, SECT_4K) }, + { "m25px32-s1", INFO(0x206316, 0, 64 * 1024, 64, SECT_4K) }, + { "m25px64", INFO(0x207117, 0, 64 * 1024, 128, 0) }, + + /* Winbond -- w25x "blocks" are 64K, "sectors" are 4KiB */ + { "w25x10", INFO(0xef3011, 0, 64 * 1024, 2, SECT_4K) }, + { "w25x20", INFO(0xef3012, 0, 64 * 1024, 4, SECT_4K) }, + { "w25x40", INFO(0xef3013, 0, 64 * 1024, 8, SECT_4K) }, + { "w25x80", INFO(0xef3014, 0, 64 * 1024, 16, SECT_4K) }, + { "w25x16", INFO(0xef3015, 0, 64 * 1024, 32, SECT_4K) }, + { "w25x32", INFO(0xef3016, 0, 64 * 1024, 64, SECT_4K) }, + { "w25q32", INFO(0xef4016, 0, 64 * 1024, 64, SECT_4K) }, + { "w25q32dw", INFO(0xef6016, 0, 64 * 1024, 64, SECT_4K) }, + { "w25x64", INFO(0xef3017, 0, 64 * 1024, 128, SECT_4K) }, + { "w25q64", INFO(0xef4017, 0, 64 * 1024, 128, SECT_4K) }, + { "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) }, + { "w25q80", INFO(0xef5014, 0, 64 * 1024, 16, SECT_4K) }, + { "w25q80bl", INFO(0xef4014, 0, 64 * 1024, 16, SECT_4K) }, + { "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) }, + { "w25q256", INFO(0xef4019, 0, 64 * 1024, 512, SECT_4K) }, + + /* Catalyst / On Semiconductor -- non-JEDEC */ + { "cat25c11", CAT25_INFO( 16, 8, 16, 1, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) }, + { "cat25c03", CAT25_INFO( 32, 8, 16, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) }, + { "cat25c09", CAT25_INFO( 128, 8, 32, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) }, + { "cat25c17", CAT25_INFO( 256, 8, 32, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) }, + { "cat25128", CAT25_INFO(2048, 8, 64, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) }, + { }, +}; +EXPORT_SYMBOL_GPL(spi_nor_ids); + +static const struct spi_device_id *spi_nor_read_id(struct spi_nor *nor) +{ + int tmp; + u8 id[5]; + u32 jedec; + u16 ext_jedec; + struct flash_info *info; + + tmp = nor->read_reg(nor, SPINOR_OP_RDID, id, 5); + if (tmp < 0) { + dev_dbg(nor->dev, " error %d reading JEDEC ID\n", tmp); + return ERR_PTR(tmp); + } + jedec = id[0]; + jedec = jedec << 8; + jedec |= id[1]; + jedec = jedec << 8; + jedec |= id[2]; + + ext_jedec = id[3] << 8 | id[4]; + + for (tmp = 0; tmp < ARRAY_SIZE(spi_nor_ids) - 1; tmp++) { + info = (void *)spi_nor_ids[tmp].driver_data; + if (info->jedec_id == jedec) { + if (info->ext_id == 0 || info->ext_id == ext_jedec) + return &spi_nor_ids[tmp]; + } + } + dev_err(nor->dev, "unrecognized JEDEC id %06x\n", jedec); + return ERR_PTR(-ENODEV); +} + +static const struct spi_device_id *jedec_probe(struct spi_nor *nor) +{ + return nor->read_id(nor); +} + +static int spi_nor_read(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u_char *buf) +{ + struct spi_nor *nor = mtd_to_spi_nor(mtd); + int ret; + + dev_dbg(nor->dev, "from 0x%08x, len %zd\n", (u32)from, len); + + ret = spi_nor_lock_and_prep(nor, SPI_NOR_OPS_READ); + if (ret) + return ret; + + ret = nor->read(nor, from, len, retlen, buf); + + spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_READ); + return ret; +} + +static int sst_write(struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, const u_char *buf) +{ + struct spi_nor *nor = mtd_to_spi_nor(mtd); + size_t actual; + int ret; + + dev_dbg(nor->dev, "to 0x%08x, len %zd\n", (u32)to, len); + + ret = spi_nor_lock_and_prep(nor, SPI_NOR_OPS_WRITE); + if (ret) + return ret; + + /* Wait until finished previous write command. */ + ret = wait_till_ready(nor); + if (ret) + goto time_out; + + write_enable(nor); + + nor->sst_write_second = false; + + actual = to % 2; + /* Start write from odd address. */ + if (actual) { + nor->program_opcode = SPINOR_OP_BP; + + /* write one byte. */ + nor->write(nor, to, 1, retlen, buf); + ret = wait_till_ready(nor); + if (ret) + goto time_out; + } + to += actual; + + /* Write out most of the data here. */ + for (; actual < len - 1; actual += 2) { + nor->program_opcode = SPINOR_OP_AAI_WP; + + /* write two bytes. */ + nor->write(nor, to, 2, retlen, buf + actual); + ret = wait_till_ready(nor); + if (ret) + goto time_out; + to += 2; + nor->sst_write_second = true; + } + nor->sst_write_second = false; + + write_disable(nor); + ret = wait_till_ready(nor); + if (ret) + goto time_out; + + /* Write out trailing byte if it exists. */ + if (actual != len) { + write_enable(nor); + + nor->program_opcode = SPINOR_OP_BP; + nor->write(nor, to, 1, retlen, buf + actual); + + ret = wait_till_ready(nor); + if (ret) + goto time_out; + write_disable(nor); + } +time_out: + spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_WRITE); + return ret; +} + +/* + * Write an address range to the nor chip. Data must be written in + * FLASH_PAGESIZE chunks. The address range may be any size provided + * it is within the physical boundaries. + */ +static int spi_nor_write(struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, const u_char *buf) +{ + struct spi_nor *nor = mtd_to_spi_nor(mtd); + u32 page_offset, page_size, i; + int ret; + + dev_dbg(nor->dev, "to 0x%08x, len %zd\n", (u32)to, len); + + ret = spi_nor_lock_and_prep(nor, SPI_NOR_OPS_WRITE); + if (ret) + return ret; + + /* Wait until finished previous write command. */ + ret = wait_till_ready(nor); + if (ret) + goto write_err; + + write_enable(nor); + + page_offset = to & (nor->page_size - 1); + + /* do all the bytes fit onto one page? */ + if (page_offset + len <= nor->page_size) { + nor->write(nor, to, len, retlen, buf); + } else { + /* the size of data remaining on the first page */ + page_size = nor->page_size - page_offset; + nor->write(nor, to, page_size, retlen, buf); + + /* write everything in nor->page_size chunks */ + for (i = page_size; i < len; i += page_size) { + page_size = len - i; + if (page_size > nor->page_size) + page_size = nor->page_size; + + wait_till_ready(nor); + write_enable(nor); + + nor->write(nor, to + i, page_size, retlen, buf + i); + } + } + +write_err: + spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_WRITE); + return 0; +} + +static int macronix_quad_enable(struct spi_nor *nor) +{ + int ret, val; + + val = read_sr(nor); + write_enable(nor); + + nor->cmd_buf[0] = val | SR_QUAD_EN_MX; + nor->write_reg(nor, SPINOR_OP_WRSR, nor->cmd_buf, 1, 0); + + if (wait_till_ready(nor)) + return 1; + + ret = read_sr(nor); + if (!(ret > 0 && (ret & SR_QUAD_EN_MX))) { + dev_err(nor->dev, "Macronix Quad bit not set\n"); + return -EINVAL; + } + + return 0; +} + +/* + * Write status Register and configuration register with 2 bytes + * The first byte will be written to the status register, while the + * second byte will be written to the configuration register. + * Return negative if error occured. + */ +static int write_sr_cr(struct spi_nor *nor, u16 val) +{ + nor->cmd_buf[0] = val & 0xff; + nor->cmd_buf[1] = (val >> 8); + + return nor->write_reg(nor, SPINOR_OP_WRSR, nor->cmd_buf, 2, 0); +} + +static int spansion_quad_enable(struct spi_nor *nor) +{ + int ret; + int quad_en = CR_QUAD_EN_SPAN << 8; + + write_enable(nor); + + ret = write_sr_cr(nor, quad_en); + if (ret < 0) { + dev_err(nor->dev, + "error while writing configuration register\n"); + return -EINVAL; + } + + /* read back and check it */ + ret = read_cr(nor); + if (!(ret > 0 && (ret & CR_QUAD_EN_SPAN))) { + dev_err(nor->dev, "Spansion Quad bit not set\n"); + return -EINVAL; + } + + return 0; +} + +static int set_quad_mode(struct spi_nor *nor, u32 jedec_id) +{ + int status; + + switch (JEDEC_MFR(jedec_id)) { + case CFI_MFR_MACRONIX: + status = macronix_quad_enable(nor); + if (status) { + dev_err(nor->dev, "Macronix quad-read not enabled\n"); + return -EINVAL; + } + return status; + default: + status = spansion_quad_enable(nor); + if (status) { + dev_err(nor->dev, "Spansion quad-read not enabled\n"); + return -EINVAL; + } + return status; + } +} + +static int spi_nor_check(struct spi_nor *nor) +{ + if (!nor->dev || !nor->read || !nor->write || + !nor->read_reg || !nor->write_reg || !nor->erase) { + pr_err("spi-nor: please fill all the necessary fields!\n"); + return -EINVAL; + } + + if (!nor->read_id) + nor->read_id = spi_nor_read_id; + if (!nor->wait_till_ready) + nor->wait_till_ready = spi_nor_wait_till_ready; + + return 0; +} + +int spi_nor_scan(struct spi_nor *nor, const struct spi_device_id *id, + enum read_mode mode) +{ + struct flash_info *info; + struct flash_platform_data *data; + struct device *dev = nor->dev; + struct mtd_info *mtd = nor->mtd; + struct device_node *np = dev->of_node; + int ret; + int i; + + ret = spi_nor_check(nor); + if (ret) + return ret; + + /* Platform data helps sort out which chip type we have, as + * well as how this board partitions it. If we don't have + * a chip ID, try the JEDEC id commands; they'll work for most + * newer chips, even if we don't recognize the particular chip. + */ + data = dev_get_platdata(dev); + if (data && data->type) { + const struct spi_device_id *plat_id; + + for (i = 0; i < ARRAY_SIZE(spi_nor_ids) - 1; i++) { + plat_id = &spi_nor_ids[i]; + if (strcmp(data->type, plat_id->name)) + continue; + break; + } + + if (i < ARRAY_SIZE(spi_nor_ids) - 1) + id = plat_id; + else + dev_warn(dev, "unrecognized id %s\n", data->type); + } + + info = (void *)id->driver_data; + + if (info->jedec_id) { + const struct spi_device_id *jid; + + jid = jedec_probe(nor); + if (IS_ERR(jid)) { + return PTR_ERR(jid); + } else if (jid != id) { + /* + * JEDEC knows better, so overwrite platform ID. We + * can't trust partitions any longer, but we'll let + * mtd apply them anyway, since some partitions may be + * marked read-only, and we don't want to lose that + * information, even if it's not 100% accurate. + */ + dev_warn(dev, "found %s, expected %s\n", + jid->name, id->name); + id = jid; + info = (void *)jid->driver_data; + } + } + + mutex_init(&nor->lock); + + /* + * Atmel, SST and Intel/Numonyx serial nor tend to power + * up with the software protection bits set + */ + + if (JEDEC_MFR(info->jedec_id) == CFI_MFR_ATMEL || + JEDEC_MFR(info->jedec_id) == CFI_MFR_INTEL || + JEDEC_MFR(info->jedec_id) == CFI_MFR_SST) { + write_enable(nor); + write_sr(nor, 0); + } + + if (data && data->name) + mtd->name = data->name; + else + mtd->name = dev_name(dev); + + mtd->type = MTD_NORFLASH; + mtd->writesize = 1; + mtd->flags = MTD_CAP_NORFLASH; + mtd->size = info->sector_size * info->n_sectors; + mtd->_erase = spi_nor_erase; + mtd->_read = spi_nor_read; + + /* nor protection support for STmicro chips */ + if (JEDEC_MFR(info->jedec_id) == CFI_MFR_ST) { + mtd->_lock = spi_nor_lock; + mtd->_unlock = spi_nor_unlock; + } + + /* sst nor chips use AAI word program */ + if (info->flags & SST_WRITE) + mtd->_write = sst_write; + else + mtd->_write = spi_nor_write; + + /* prefer "small sector" erase if possible */ + if (info->flags & SECT_4K) { + nor->erase_opcode = SPINOR_OP_BE_4K; + mtd->erasesize = 4096; + } else if (info->flags & SECT_4K_PMC) { + nor->erase_opcode = SPINOR_OP_BE_4K_PMC; + mtd->erasesize = 4096; + } else { + nor->erase_opcode = SPINOR_OP_SE; + mtd->erasesize = info->sector_size; + } + + if (info->flags & SPI_NOR_NO_ERASE) + mtd->flags |= MTD_NO_ERASE; + + mtd->dev.parent = dev; + nor->page_size = info->page_size; + mtd->writebufsize = nor->page_size; + + if (np) { + /* If we were instantiated by DT, use it */ + if (of_property_read_bool(np, "m25p,fast-read")) + nor->flash_read = SPI_NOR_FAST; + else + nor->flash_read = SPI_NOR_NORMAL; + } else { + /* If we weren't instantiated by DT, default to fast-read */ + nor->flash_read = SPI_NOR_FAST; + } + + /* Some devices cannot do fast-read, no matter what DT tells us */ + if (info->flags & SPI_NOR_NO_FR) + nor->flash_read = SPI_NOR_NORMAL; + + /* Quad/Dual-read mode takes precedence over fast/normal */ + if (mode == SPI_NOR_QUAD && info->flags & SPI_NOR_QUAD_READ) { + ret = set_quad_mode(nor, info->jedec_id); + if (ret) { + dev_err(dev, "quad mode not supported\n"); + return ret; + } + nor->flash_read = SPI_NOR_QUAD; + } else if (mode == SPI_NOR_DUAL && info->flags & SPI_NOR_DUAL_READ) { + nor->flash_read = SPI_NOR_DUAL; + } + + /* Default commands */ + switch (nor->flash_read) { + case SPI_NOR_QUAD: + nor->read_opcode = SPINOR_OP_READ_1_1_4; + break; + case SPI_NOR_DUAL: + nor->read_opcode = SPINOR_OP_READ_1_1_2; + break; + case SPI_NOR_FAST: + nor->read_opcode = SPINOR_OP_READ_FAST; + break; + case SPI_NOR_NORMAL: + nor->read_opcode = SPINOR_OP_READ; + break; + default: + dev_err(dev, "No Read opcode defined\n"); + return -EINVAL; + } + + nor->program_opcode = SPINOR_OP_PP; + + if (info->addr_width) + nor->addr_width = info->addr_width; + else if (mtd->size > 0x1000000) { + /* enable 4-byte addressing if the device exceeds 16MiB */ + nor->addr_width = 4; + if (JEDEC_MFR(info->jedec_id) == CFI_MFR_AMD) { + /* Dedicated 4-byte command set */ + switch (nor->flash_read) { + case SPI_NOR_QUAD: + nor->read_opcode = SPINOR_OP_READ4_1_1_4; + break; + case SPI_NOR_DUAL: + nor->read_opcode = SPINOR_OP_READ4_1_1_2; + break; + case SPI_NOR_FAST: + nor->read_opcode = SPINOR_OP_READ4_FAST; + break; + case SPI_NOR_NORMAL: + nor->read_opcode = SPINOR_OP_READ4; + break; + } + nor->program_opcode = SPINOR_OP_PP_4B; + /* No small sector erase for 4-byte command set */ + nor->erase_opcode = SPINOR_OP_SE_4B; + mtd->erasesize = info->sector_size; + } else + set_4byte(nor, info->jedec_id, 1); + } else { + nor->addr_width = 3; + } + + nor->read_dummy = spi_nor_read_dummy_cycles(nor); + + dev_info(dev, "%s (%lld Kbytes)\n", id->name, + (long long)mtd->size >> 10); + + dev_dbg(dev, + "mtd .name = %s, .size = 0x%llx (%lldMiB), " + ".erasesize = 0x%.8x (%uKiB) .numeraseregions = %d\n", + mtd->name, (long long)mtd->size, (long long)(mtd->size >> 20), + mtd->erasesize, mtd->erasesize / 1024, mtd->numeraseregions); + + if (mtd->numeraseregions) + for (i = 0; i < mtd->numeraseregions; i++) + dev_dbg(dev, + "mtd.eraseregions[%d] = { .offset = 0x%llx, " + ".erasesize = 0x%.8x (%uKiB), " + ".numblocks = %d }\n", + i, (long long)mtd->eraseregions[i].offset, + mtd->eraseregions[i].erasesize, + mtd->eraseregions[i].erasesize / 1024, + mtd->eraseregions[i].numblocks); + return 0; +} +EXPORT_SYMBOL_GPL(spi_nor_scan); + +const struct spi_device_id *spi_nor_match_id(char *name) +{ + const struct spi_device_id *id = spi_nor_ids; + + while (id->name[0]) { + if (!strcmp(name, id->name)) + return id; + id++; + } + return NULL; +} +EXPORT_SYMBOL_GPL(spi_nor_match_id); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Huang Shijie <shijie8@gmail.com>"); +MODULE_AUTHOR("Mike Lavender"); +MODULE_DESCRIPTION("framework for SPI NOR"); diff --git a/drivers/mtd/tests/oobtest.c b/drivers/mtd/tests/oobtest.c index 2e9e2d11f204..f19ab1acde1f 100644 --- a/drivers/mtd/tests/oobtest.c +++ b/drivers/mtd/tests/oobtest.c @@ -69,8 +69,8 @@ static int write_eraseblock(int ebnum) int err = 0; loff_t addr = ebnum * mtd->erasesize; + prandom_bytes_state(&rnd_state, writebuf, use_len_max * pgcnt); for (i = 0; i < pgcnt; ++i, addr += mtd->writesize) { - prandom_bytes_state(&rnd_state, writebuf, use_len); ops.mode = MTD_OPS_AUTO_OOB; ops.len = 0; ops.retlen = 0; @@ -78,7 +78,7 @@ static int write_eraseblock(int ebnum) ops.oobretlen = 0; ops.ooboffs = use_offset; ops.datbuf = NULL; - ops.oobbuf = writebuf; + ops.oobbuf = writebuf + (use_len_max * i) + use_offset; err = mtd_write_oob(mtd, addr, &ops); if (err || ops.oobretlen != use_len) { pr_err("error: writeoob failed at %#llx\n", @@ -122,8 +122,8 @@ static int verify_eraseblock(int ebnum) int err = 0; loff_t addr = ebnum * mtd->erasesize; + prandom_bytes_state(&rnd_state, writebuf, use_len_max * pgcnt); for (i = 0; i < pgcnt; ++i, addr += mtd->writesize) { - prandom_bytes_state(&rnd_state, writebuf, use_len); ops.mode = MTD_OPS_AUTO_OOB; ops.len = 0; ops.retlen = 0; @@ -139,7 +139,8 @@ static int verify_eraseblock(int ebnum) errcnt += 1; return err ? err : -1; } - if (memcmp(readbuf, writebuf, use_len)) { + if (memcmp(readbuf, writebuf + (use_len_max * i) + use_offset, + use_len)) { pr_err("error: verify failed at %#llx\n", (long long)addr); errcnt += 1; @@ -166,7 +167,9 @@ static int verify_eraseblock(int ebnum) errcnt += 1; return err ? err : -1; } - if (memcmp(readbuf + use_offset, writebuf, use_len)) { + if (memcmp(readbuf + use_offset, + writebuf + (use_len_max * i) + use_offset, + use_len)) { pr_err("error: verify failed at %#llx\n", (long long)addr); errcnt += 1; @@ -566,8 +569,8 @@ static int __init mtd_oobtest_init(void) if (bbt[i] || bbt[i + 1]) continue; addr = (i + 1) * mtd->erasesize - mtd->writesize; + prandom_bytes_state(&rnd_state, writebuf, sz * cnt); for (pg = 0; pg < cnt; ++pg) { - prandom_bytes_state(&rnd_state, writebuf, sz); ops.mode = MTD_OPS_AUTO_OOB; ops.len = 0; ops.retlen = 0; @@ -575,7 +578,7 @@ static int __init mtd_oobtest_init(void) ops.oobretlen = 0; ops.ooboffs = 0; ops.datbuf = NULL; - ops.oobbuf = writebuf; + ops.oobbuf = writebuf + pg * sz; err = mtd_write_oob(mtd, addr, &ops); if (err) goto out; diff --git a/drivers/mtd/ubi/block.c b/drivers/mtd/ubi/block.c index 7ff473c871a9..8457df7ec5af 100644 --- a/drivers/mtd/ubi/block.c +++ b/drivers/mtd/ubi/block.c @@ -253,7 +253,7 @@ static int do_ubiblock_request(struct ubiblock *dev, struct request *req) * flash access anyway. */ mutex_lock(&dev->dev_mutex); - ret = ubiblock_read(dev, req->buffer, sec, len); + ret = ubiblock_read(dev, bio_data(req->bio), sec, len); mutex_unlock(&dev->dev_mutex); return ret; @@ -431,9 +431,11 @@ int ubiblock_create(struct ubi_volume_info *vi) * Create one workqueue per volume (per registered block device). * Rembember workqueues are cheap, they're not threads. */ - dev->wq = alloc_workqueue(gd->disk_name, 0, 0); - if (!dev->wq) + dev->wq = alloc_workqueue("%s", 0, 0, gd->disk_name); + if (!dev->wq) { + ret = -ENOMEM; goto out_free_queue; + } INIT_WORK(&dev->work, ubiblock_do_work); mutex_lock(&devices_mutex); diff --git a/drivers/mtd/ubi/cdev.c b/drivers/mtd/ubi/cdev.c index f54562a5998e..7646220ca6e2 100644 --- a/drivers/mtd/ubi/cdev.c +++ b/drivers/mtd/ubi/cdev.c @@ -731,7 +731,7 @@ static int rename_volumes(struct ubi_device *ubi, goto out_free; } - re->desc = ubi_open_volume(ubi->ubi_num, vol_id, UBI_EXCLUSIVE); + re->desc = ubi_open_volume(ubi->ubi_num, vol_id, UBI_READWRITE); if (IS_ERR(re->desc)) { err = PTR_ERR(re->desc); ubi_err("cannot open volume %d, error %d", vol_id, err); diff --git a/drivers/mtd/ubi/fastmap.c b/drivers/mtd/ubi/fastmap.c index c5dad652614d..b04e7d059888 100644 --- a/drivers/mtd/ubi/fastmap.c +++ b/drivers/mtd/ubi/fastmap.c @@ -125,9 +125,9 @@ static struct ubi_ainf_volume *add_vol(struct ubi_attach_info *ai, int vol_id, parent = *p; av = rb_entry(parent, struct ubi_ainf_volume, rb); - if (vol_id > av->vol_id) + if (vol_id < av->vol_id) p = &(*p)->rb_left; - else if (vol_id > av->vol_id) + else p = &(*p)->rb_right; } diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c index 02317c1c0238..0f3425dac910 100644 --- a/drivers/mtd/ubi/wl.c +++ b/drivers/mtd/ubi/wl.c @@ -671,6 +671,8 @@ static struct ubi_wl_entry *get_peb_for_wl(struct ubi_device *ubi) e = find_wl_entry(ubi, &ubi->free, WL_FREE_MAX_DIFF); self_check_in_wl_tree(ubi, e, &ubi->free); + ubi->free_count--; + ubi_assert(ubi->free_count >= 0); rb_erase(&e->u.rb, &ubi->free); return e; @@ -684,6 +686,9 @@ int ubi_wl_get_peb(struct ubi_device *ubi) peb = __wl_get_peb(ubi); spin_unlock(&ubi->wl_lock); + if (peb < 0) + return peb; + err = ubi_self_check_all_ff(ubi, peb, ubi->vid_hdr_aloffset, ubi->peb_size - ubi->vid_hdr_aloffset); if (err) { @@ -1068,6 +1073,7 @@ static int wear_leveling_worker(struct ubi_device *ubi, struct ubi_work *wrk, /* Give the unused PEB back */ wl_tree_add(e2, &ubi->free); + ubi->free_count++; goto out_cancel; } self_check_in_wl_tree(ubi, e1, &ubi->used); |