diff options
Diffstat (limited to 'drivers/net/bnx2.h')
| -rw-r--r-- | drivers/net/bnx2.h | 48 |
1 files changed, 35 insertions, 13 deletions
diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h index 617d95340160..900641ac63e0 100644 --- a/drivers/net/bnx2.h +++ b/drivers/net/bnx2.h @@ -378,6 +378,9 @@ struct l2_fhdr { * pci_config_l definition * offset: 0000 */ +#define BNX2_PCICFG_MSI_CONTROL 0x00000058 +#define BNX2_PCICFG_MSI_CONTROL_ENABLE (1L<<16) + #define BNX2_PCICFG_MISC_CONFIG 0x00000068 #define BNX2_PCICFG_MISC_CONFIG_TARGET_BYTE_SWAP (1L<<2) #define BNX2_PCICFG_MISC_CONFIG_TARGET_MB_WORD_SWAP (1L<<3) @@ -4199,7 +4202,14 @@ struct l2_fhdr { #define BNX2_RBUF_CONFIG 0x0020000c #define BNX2_RBUF_CONFIG_XOFF_TRIP (0x3ffL<<0) +#define BNX2_RBUF_CONFIG_XOFF_TRIP_VAL(mtu) \ + ((((mtu) - 1500) * 31 / 1000) + 54) #define BNX2_RBUF_CONFIG_XON_TRIP (0x3ffL<<16) +#define BNX2_RBUF_CONFIG_XON_TRIP_VAL(mtu) \ + ((((mtu) - 1500) * 39 / 1000) + 66) +#define BNX2_RBUF_CONFIG_VAL(mtu) \ + (BNX2_RBUF_CONFIG_XOFF_TRIP_VAL(mtu) | \ + (BNX2_RBUF_CONFIG_XON_TRIP_VAL(mtu) << 16)) #define BNX2_RBUF_FW_BUF_ALLOC 0x00200010 #define BNX2_RBUF_FW_BUF_ALLOC_VALUE (0x1ffL<<7) @@ -4221,11 +4231,25 @@ struct l2_fhdr { #define BNX2_RBUF_CONFIG2 0x0020001c #define BNX2_RBUF_CONFIG2_MAC_DROP_TRIP (0x3ffL<<0) +#define BNX2_RBUF_CONFIG2_MAC_DROP_TRIP_VAL(mtu) \ + ((((mtu) - 1500) * 4 / 1000) + 5) #define BNX2_RBUF_CONFIG2_MAC_KEEP_TRIP (0x3ffL<<16) +#define BNX2_RBUF_CONFIG2_MAC_KEEP_TRIP_VAL(mtu) \ + ((((mtu) - 1500) * 2 / 100) + 30) +#define BNX2_RBUF_CONFIG2_VAL(mtu) \ + (BNX2_RBUF_CONFIG2_MAC_DROP_TRIP_VAL(mtu) | \ + (BNX2_RBUF_CONFIG2_MAC_KEEP_TRIP_VAL(mtu) << 16)) #define BNX2_RBUF_CONFIG3 0x00200020 #define BNX2_RBUF_CONFIG3_CU_DROP_TRIP (0x3ffL<<0) +#define BNX2_RBUF_CONFIG3_CU_DROP_TRIP_VAL(mtu) \ + ((((mtu) - 1500) * 12 / 1000) + 18) #define BNX2_RBUF_CONFIG3_CU_KEEP_TRIP (0x3ffL<<16) +#define BNX2_RBUF_CONFIG3_CU_KEEP_TRIP_VAL(mtu) \ + ((((mtu) - 1500) * 2 / 100) + 30) +#define BNX2_RBUF_CONFIG3_VAL(mtu) \ + (BNX2_RBUF_CONFIG3_CU_DROP_TRIP_VAL(mtu) | \ + (BNX2_RBUF_CONFIG3_CU_KEEP_TRIP_VAL(mtu) << 16)) #define BNX2_RBUF_PKT_DATA 0x00208000 #define BNX2_RBUF_CLIST_DATA 0x00210000 @@ -6603,7 +6627,7 @@ struct bnx2_irq { irq_handler_t handler; unsigned int vector; u8 requested; - char name[16]; + char name[IFNAMSIZ + 2]; }; struct bnx2_tx_ring_info { @@ -6658,8 +6682,6 @@ struct bnx2_napi { struct bnx2_tx_ring_info tx_ring; }; -#define BNX2_TIMER_INTERVAL HZ - struct bnx2 { /* Fields used in the tx and intr/napi performance paths are grouped */ /* together in the beginning of the structure. */ @@ -6707,7 +6729,11 @@ struct bnx2 { /* End of fields used in the performance code paths. */ - int current_interval; + unsigned int current_interval; +#define BNX2_TIMER_INTERVAL HZ +#define BNX2_SERDES_AN_TIMEOUT (HZ / 3) +#define BNX2_SERDES_FORCED_TIMEOUT (HZ / 10) + struct timer_list timer; struct work_struct reset_task; @@ -6822,9 +6848,6 @@ struct bnx2 { u8 flow_ctrl; /* actual flow ctrl settings */ /* may be different from */ /* req_flow_ctrl if autoneg */ -#define FLOW_CTRL_TX 1 -#define FLOW_CTRL_RX 2 - u32 advertising; u8 req_flow_ctrl; /* flow ctrl advertisement */ @@ -6839,8 +6862,6 @@ struct bnx2 { #define PHY_LOOPBACK 2 u8 serdes_an_pending; -#define SERDES_AN_TIMEOUT (HZ / 3) -#define SERDES_FORCED_TIMEOUT (HZ / 10) u8 mac_addr[8]; @@ -6851,8 +6872,6 @@ struct bnx2 { int pm_cap; int pcix_cap; - struct net_device_stats net_stats; - struct flash_spec *flash_info; u32 flash_size; @@ -6863,6 +6882,9 @@ struct bnx2 { u8 num_tx_rings; u8 num_rx_rings; + + u32 idle_chk_status_idx; + }; #define REG_RD(bp, offset) \ @@ -6938,14 +6960,14 @@ struct fw_info { /* This value (in milliseconds) determines the frequency of the driver * issuing the PULSE message code. The firmware monitors this periodic * pulse to determine when to switch to an OS-absent mode. */ -#define DRV_PULSE_PERIOD_MS 250 +#define BNX2_DRV_PULSE_PERIOD_MS 250 /* This value (in milliseconds) determines how long the driver should * wait for an acknowledgement from the firmware before timing out. Once * the firmware has timed out, the driver will assume there is no firmware * running and there won't be any firmware-driver synchronization during a * driver reset. */ -#define FW_ACK_TIME_OUT_MS 1000 +#define BNX2_FW_ACK_TIME_OUT_MS 1000 #define BNX2_DRV_RESET_SIGNATURE 0x00000000 |