summaryrefslogtreecommitdiffstats
path: root/drivers/net/bnx2x/bnx2x_link.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/bnx2x/bnx2x_link.c')
-rw-r--r--drivers/net/bnx2x/bnx2x_link.c218
1 files changed, 147 insertions, 71 deletions
diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c
index bcd8f0038628..d45b1555a602 100644
--- a/drivers/net/bnx2x/bnx2x_link.c
+++ b/drivers/net/bnx2x/bnx2x_link.c
@@ -1546,6 +1546,12 @@ static void bnx2x_umac_enable(struct link_params *params,
vars->line_speed);
break;
}
+ if (!(vars->flow_ctrl & BNX2X_FLOW_CTRL_TX))
+ val |= UMAC_COMMAND_CONFIG_REG_IGNORE_TX_PAUSE;
+
+ if (!(vars->flow_ctrl & BNX2X_FLOW_CTRL_RX))
+ val |= UMAC_COMMAND_CONFIG_REG_PAUSE_IGNORE;
+
REG_WR(bp, umac_base + UMAC_REG_COMMAND_CONFIG, val);
udelay(50);
@@ -1661,10 +1667,20 @@ static void bnx2x_xmac_disable(struct link_params *params)
{
u8 port = params->port;
struct bnx2x *bp = params->bp;
- u32 xmac_base = (port) ? GRCBASE_XMAC1 : GRCBASE_XMAC0;
+ u32 pfc_ctrl, xmac_base = (port) ? GRCBASE_XMAC1 : GRCBASE_XMAC0;
if (REG_RD(bp, MISC_REG_RESET_REG_2) &
MISC_REGISTERS_RESET_REG_2_XMAC) {
+ /*
+ * Send an indication to change the state in the NIG back to XON
+ * Clearing this bit enables the next set of this bit to get
+ * rising edge
+ */
+ pfc_ctrl = REG_RD(bp, xmac_base + XMAC_REG_PFC_CTRL_HI);
+ REG_WR(bp, xmac_base + XMAC_REG_PFC_CTRL_HI,
+ (pfc_ctrl & ~(1<<1)));
+ REG_WR(bp, xmac_base + XMAC_REG_PFC_CTRL_HI,
+ (pfc_ctrl | (1<<1)));
DP(NETIF_MSG_LINK, "Disable XMAC on port %x\n", port);
REG_WR(bp, xmac_base + XMAC_REG_CTRL, 0);
usleep_range(1000, 1000);
@@ -1729,6 +1745,10 @@ static int bnx2x_emac_enable(struct link_params *params,
DP(NETIF_MSG_LINK, "enabling EMAC\n");
+ /* Disable BMAC */
+ REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
+ (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
+
/* enable emac and not bmac */
REG_WR(bp, NIG_REG_EGRESS_EMAC0_PORT + port*4, 1);
@@ -2583,12 +2603,6 @@ static int bnx2x_bmac1_enable(struct link_params *params,
REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_RX_LLFC_MSG_FLDS,
wb_data, 2);
- if (vars->phy_flags & PHY_TX_ERROR_CHECK_FLAG) {
- REG_RD_DMAE(bp, bmac_addr + BIGMAC_REGISTER_RX_LSS_STATUS,
- wb_data, 2);
- if (wb_data[0] > 0)
- return -ESRCH;
- }
return 0;
}
@@ -2654,16 +2668,6 @@ static int bnx2x_bmac2_enable(struct link_params *params,
udelay(30);
bnx2x_update_pfc_bmac2(params, vars, is_lb);
- if (vars->phy_flags & PHY_TX_ERROR_CHECK_FLAG) {
- REG_RD_DMAE(bp, bmac_addr + BIGMAC2_REGISTER_RX_LSS_STAT,
- wb_data, 2);
- if (wb_data[0] > 0) {
- DP(NETIF_MSG_LINK, "Got bad LSS status 0x%x\n",
- wb_data[0]);
- return -ESRCH;
- }
- }
-
return 0;
}
@@ -2949,7 +2953,9 @@ static int bnx2x_cl45_read(struct bnx2x *bp, struct bnx2x_phy *phy,
u32 val;
u16 i;
int rc = 0;
-
+ if (phy->flags & FLAGS_MDC_MDIO_WA_B0)
+ bnx2x_bits_en(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_STATUS,
+ EMAC_MDIO_STATUS_10MB);
/* address */
val = ((phy->addr << 21) | (devad << 16) | reg |
EMAC_MDIO_COMM_COMMAND_ADDRESS |
@@ -3003,6 +3009,9 @@ static int bnx2x_cl45_read(struct bnx2x *bp, struct bnx2x_phy *phy,
}
}
+ if (phy->flags & FLAGS_MDC_MDIO_WA_B0)
+ bnx2x_bits_dis(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_STATUS,
+ EMAC_MDIO_STATUS_10MB);
return rc;
}
@@ -3012,6 +3021,9 @@ static int bnx2x_cl45_write(struct bnx2x *bp, struct bnx2x_phy *phy,
u32 tmp;
u8 i;
int rc = 0;
+ if (phy->flags & FLAGS_MDC_MDIO_WA_B0)
+ bnx2x_bits_en(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_STATUS,
+ EMAC_MDIO_STATUS_10MB);
/* address */
@@ -3065,7 +3077,9 @@ static int bnx2x_cl45_write(struct bnx2x *bp, struct bnx2x_phy *phy,
bnx2x_cl45_read(bp, phy, devad, 0xf, &temp_val);
}
}
-
+ if (phy->flags & FLAGS_MDC_MDIO_WA_B0)
+ bnx2x_bits_dis(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_STATUS,
+ EMAC_MDIO_STATUS_10MB);
return rc;
}
@@ -4353,6 +4367,9 @@ void bnx2x_link_status_update(struct link_params *params,
vars->link_up = (vars->link_status & LINK_STATUS_LINK_UP);
vars->phy_flags = PHY_XGXS_FLAG;
+ if (vars->link_status & LINK_STATUS_PHYSICAL_LINK_FLAG)
+ vars->phy_flags |= PHY_PHYSICAL_LINK_FLAG;
+
if (vars->link_up) {
DP(NETIF_MSG_LINK, "phy link up\n");
@@ -4444,6 +4461,8 @@ void bnx2x_link_status_update(struct link_params *params,
/* indicate no mac active */
vars->mac_type = MAC_TYPE_NONE;
+ if (vars->link_status & LINK_STATUS_PHYSICAL_LINK_FLAG)
+ vars->phy_flags |= PHY_HALF_OPEN_CONN_FLAG;
}
/* Sync media type */
@@ -5903,20 +5922,30 @@ int bnx2x_set_led(struct link_params *params,
tmp = EMAC_RD(bp, EMAC_REG_EMAC_LED);
EMAC_WR(bp, EMAC_REG_EMAC_LED,
(tmp | EMAC_LED_OVERRIDE));
- return rc;
+ /*
+ * return here without enabling traffic
+ * LED blink andsetting rate in ON mode.
+ * In oper mode, enabling LED blink
+ * and setting rate is needed.
+ */
+ if (mode == LED_MODE_ON)
+ return rc;
}
- } else if (SINGLE_MEDIA_DIRECT(params) &&
- (CHIP_IS_E1x(bp) ||
- CHIP_IS_E2(bp))) {
+ } else if (SINGLE_MEDIA_DIRECT(params)) {
/*
* This is a work-around for HW issue found when link
* is up in CL73
*/
- REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, 0);
REG_WR(bp, NIG_REG_LED_10G_P0 + port*4, 1);
- } else {
+ if (CHIP_IS_E1x(bp) ||
+ CHIP_IS_E2(bp) ||
+ (mode == LED_MODE_ON))
+ REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, 0);
+ else
+ REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4,
+ hw_led_mode);
+ } else
REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, hw_led_mode);
- }
REG_WR(bp, NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0 + port*4, 0);
/* Set blinking rate to ~15.9Hz */
@@ -6160,6 +6189,7 @@ static int bnx2x_update_link_down(struct link_params *params,
/* update shared memory */
vars->link_status &= ~(LINK_STATUS_SPEED_AND_DUPLEX_MASK |
LINK_STATUS_LINK_UP |
+ LINK_STATUS_PHYSICAL_LINK_FLAG |
LINK_STATUS_AUTO_NEGOTIATE_COMPLETE |
LINK_STATUS_RX_FLOW_CONTROL_FLAG_MASK |
LINK_STATUS_TX_FLOW_CONTROL_FLAG_MASK |
@@ -6197,7 +6227,8 @@ static int bnx2x_update_link_up(struct link_params *params,
u8 port = params->port;
int rc = 0;
- vars->link_status |= LINK_STATUS_LINK_UP;
+ vars->link_status |= (LINK_STATUS_LINK_UP |
+ LINK_STATUS_PHYSICAL_LINK_FLAG);
vars->phy_flags |= PHY_PHYSICAL_LINK_FLAG;
if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX)
@@ -7998,6 +8029,9 @@ static void bnx2x_warpcore_set_limiting_mode(struct link_params *params,
bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE, &val);
+ /* Restart microcode to re-read the new mode */
+ bnx2x_warpcore_reset_lane(bp, phy, 1);
+ bnx2x_warpcore_reset_lane(bp, phy, 0);
}
@@ -8116,7 +8150,6 @@ void bnx2x_handle_module_detect_int(struct link_params *params)
offsetof(struct shmem_region, dev_info.
port_feature_config[params->port].
config));
-
bnx2x_set_gpio_int(bp, gpio_num,
MISC_REGISTERS_GPIO_INT_OUTPUT_SET,
gpio_port);
@@ -8125,8 +8158,9 @@ void bnx2x_handle_module_detect_int(struct link_params *params)
* Disable transmit for this module
*/
phy->media_type = ETH_PHY_NOT_PRESENT;
- if ((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) ==
- PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_DISABLE_TX_LASER)
+ if (((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) ==
+ PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_DISABLE_TX_LASER) ||
+ CHIP_IS_E3(bp))
bnx2x_sfp_set_transmitter(params, phy, 0);
}
}
@@ -8228,9 +8262,6 @@ static u8 bnx2x_8706_config_init(struct bnx2x_phy *phy,
u16 cnt, val, tmp1;
struct bnx2x *bp = params->bp;
- /* SPF+ PHY: Set flag to check for Tx error */
- vars->phy_flags = PHY_TX_ERROR_CHECK_FLAG;
-
bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
MISC_REGISTERS_GPIO_OUTPUT_HIGH, params->port);
/* HW reset */
@@ -8414,9 +8445,6 @@ static int bnx2x_8726_config_init(struct bnx2x_phy *phy,
struct bnx2x *bp = params->bp;
DP(NETIF_MSG_LINK, "Initializing BCM8726\n");
- /* SPF+ PHY: Set flag to check for Tx error */
- vars->phy_flags = PHY_TX_ERROR_CHECK_FLAG;
-
bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 1<<15);
bnx2x_wait_reset_complete(bp, phy, params);
@@ -8585,9 +8613,6 @@ static int bnx2x_8727_config_init(struct bnx2x_phy *phy,
struct bnx2x *bp = params->bp;
/* Enable PMD link, MOD_ABS_FLT, and 1G link alarm */
- /* SPF+ PHY: Set flag to check for Tx error */
- vars->phy_flags = PHY_TX_ERROR_CHECK_FLAG;
-
bnx2x_wait_reset_complete(bp, phy, params);
rx_alarm_ctrl_val = (1<<2) | (1<<5) ;
/* Should be 0x6 to enable XS on Tx side. */
@@ -9243,7 +9268,13 @@ static int bnx2x_848xx_cmn_config_init(struct bnx2x_phy *phy,
if (phy->req_duplex == DUPLEX_FULL)
autoneg_val |= (1<<8);
- bnx2x_cl45_write(bp, phy,
+ /*
+ * Always write this if this is not 84833.
+ * For 84833, write it only when it's a forced speed.
+ */
+ if ((phy->type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) ||
+ ((autoneg_val & (1<<12)) == 0))
+ bnx2x_cl45_write(bp, phy,
MDIO_AN_DEVAD,
MDIO_AN_REG_8481_LEGACY_MII_CTRL, autoneg_val);
@@ -9257,13 +9288,12 @@ static int bnx2x_848xx_cmn_config_init(struct bnx2x_phy *phy,
bnx2x_cl45_write(bp, phy,
MDIO_AN_DEVAD, MDIO_AN_REG_CTRL,
0x3200);
- } else if (phy->req_line_speed != SPEED_10 &&
- phy->req_line_speed != SPEED_100) {
+ } else
bnx2x_cl45_write(bp, phy,
MDIO_AN_DEVAD,
MDIO_AN_REG_8481_10GBASE_T_AN_CTRL,
1);
- }
+
/* Save spirom version */
bnx2x_save_848xx_spirom_version(phy, params);
@@ -9756,11 +9786,9 @@ static void bnx2x_848x3_link_reset(struct bnx2x_phy *phy,
bnx2x_cl45_read(bp, phy,
MDIO_CTL_DEVAD,
0x400f, &val16);
- /* Put to low power mode on newer FW */
- if ((val16 & 0x303f) > 0x1009)
- bnx2x_cl45_write(bp, phy,
- MDIO_PMA_DEVAD,
- MDIO_PMA_REG_CTRL, 0x800);
+ bnx2x_cl45_write(bp, phy,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_CTRL, 0x800);
}
}
@@ -10191,8 +10219,15 @@ static void bnx2x_54618se_link_reset(struct bnx2x_phy *phy,
u32 cfg_pin;
u8 port;
- /* This works with E3 only, no need to check the chip
- before determining the port. */
+ /*
+ * In case of no EPIO routed to reset the GPHY, put it
+ * in low power mode.
+ */
+ bnx2x_cl22_write(bp, phy, MDIO_PMA_REG_CTRL, 0x800);
+ /*
+ * This works with E3 only, no need to check the chip
+ * before determining the port.
+ */
port = params->port;
cfg_pin = (REG_RD(bp, params->shmem_base +
offsetof(struct shmem_region,
@@ -10603,7 +10638,8 @@ static struct bnx2x_phy phy_warpcore = {
.type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT,
.addr = 0xff,
.def_md_devad = 0,
- .flags = FLAGS_HW_LOCK_REQUIRED,
+ .flags = (FLAGS_HW_LOCK_REQUIRED |
+ FLAGS_TX_ERROR_CHECK),
.rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
.tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
.mdio_ctrl = 0,
@@ -10729,7 +10765,8 @@ static struct bnx2x_phy phy_8706 = {
.type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706,
.addr = 0xff,
.def_md_devad = 0,
- .flags = FLAGS_INIT_XGXS_FIRST,
+ .flags = (FLAGS_INIT_XGXS_FIRST |
+ FLAGS_TX_ERROR_CHECK),
.rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
.tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
.mdio_ctrl = 0,
@@ -10760,7 +10797,8 @@ static struct bnx2x_phy phy_8726 = {
.addr = 0xff,
.def_md_devad = 0,
.flags = (FLAGS_HW_LOCK_REQUIRED |
- FLAGS_INIT_XGXS_FIRST),
+ FLAGS_INIT_XGXS_FIRST |
+ FLAGS_TX_ERROR_CHECK),
.rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
.tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
.mdio_ctrl = 0,
@@ -10791,7 +10829,8 @@ static struct bnx2x_phy phy_8727 = {
.type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727,
.addr = 0xff,
.def_md_devad = 0,
- .flags = FLAGS_FAN_FAILURE_DET_REQ,
+ .flags = (FLAGS_FAN_FAILURE_DET_REQ |
+ FLAGS_TX_ERROR_CHECK),
.rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
.tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
.mdio_ctrl = 0,
@@ -11112,6 +11151,8 @@ static int bnx2x_populate_int_phy(struct bnx2x *bp, u32 shmem_base, u8 port,
*/
if (CHIP_REV(bp) == CHIP_REV_Ax)
phy->flags |= FLAGS_MDC_MDIO_WA;
+ else
+ phy->flags |= FLAGS_MDC_MDIO_WA_B0;
} else {
switch (switch_cfg) {
case SWITCH_CFG_1G:
@@ -11500,13 +11541,12 @@ void bnx2x_init_xmac_loopback(struct link_params *params,
* Set WC to loopback mode since link is required to provide clock
* to the XMAC in 20G mode
*/
- if (vars->line_speed == SPEED_20000) {
- bnx2x_set_aer_mmd(params, &params->phy[0]);
- bnx2x_warpcore_reset_lane(bp, &params->phy[0], 0);
- params->phy[INT_PHY].config_loopback(
+ bnx2x_set_aer_mmd(params, &params->phy[0]);
+ bnx2x_warpcore_reset_lane(bp, &params->phy[0], 0);
+ params->phy[INT_PHY].config_loopback(
&params->phy[INT_PHY],
params);
- }
+
bnx2x_xmac_enable(params, vars, 1);
REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + params->port*4, 0);
}
@@ -11684,12 +11724,16 @@ int bnx2x_link_reset(struct link_params *params, struct link_vars *vars,
bnx2x_set_led(params, vars, LED_MODE_OFF, 0);
if (reset_ext_phy) {
+ bnx2x_set_mdio_clk(bp, params->chip_id, port);
for (phy_index = EXT_PHY1; phy_index < params->num_phys;
phy_index++) {
- if (params->phy[phy_index].link_reset)
+ if (params->phy[phy_index].link_reset) {
+ bnx2x_set_aer_mmd(params,
+ &params->phy[phy_index]);
params->phy[phy_index].link_reset(
&params->phy[phy_index],
params);
+ }
if (params->phy[phy_index].flags &
FLAGS_REARM_LATCH_SIGNAL)
clear_latch_ind = 1;
@@ -12178,10 +12222,6 @@ static void bnx2x_analyze_link_error(struct link_params *params,
u8 led_mode;
u32 half_open_conn = (vars->phy_flags & PHY_HALF_OPEN_CONN_FLAG) > 0;
- /*DP(NETIF_MSG_LINK, "CHECK LINK: %x half_open:%x-> lss:%x\n",
- vars->link_up,
- half_open_conn, lss_status);*/
-
if ((lss_status ^ half_open_conn) == 0)
return;
@@ -12194,6 +12234,7 @@ static void bnx2x_analyze_link_error(struct link_params *params,
* b. Update link_vars->link_up
*/
if (lss_status) {
+ DP(NETIF_MSG_LINK, "Remote Fault detected !!!\n");
vars->link_status &= ~LINK_STATUS_LINK_UP;
vars->link_up = 0;
vars->phy_flags |= PHY_HALF_OPEN_CONN_FLAG;
@@ -12203,6 +12244,7 @@ static void bnx2x_analyze_link_error(struct link_params *params,
*/
led_mode = LED_MODE_OFF;
} else {
+ DP(NETIF_MSG_LINK, "Remote Fault cleared\n");
vars->link_status |= LINK_STATUS_LINK_UP;
vars->link_up = 1;
vars->phy_flags &= ~PHY_HALF_OPEN_CONN_FLAG;
@@ -12219,6 +12261,15 @@ static void bnx2x_analyze_link_error(struct link_params *params,
bnx2x_notify_link_changed(bp);
}
+/******************************************************************************
+* Description:
+* This function checks for half opened connection change indication.
+* When such change occurs, it calls the bnx2x_analyze_link_error
+* to check if Remote Fault is set or cleared. Reception of remote fault
+* status message in the MAC indicates that the peer's MAC has detected
+* a fault, for example, due to break in the TX side of fiber.
+*
+******************************************************************************/
static void bnx2x_check_half_open_conn(struct link_params *params,
struct link_vars *vars)
{
@@ -12229,9 +12280,28 @@ static void bnx2x_check_half_open_conn(struct link_params *params,
if ((vars->phy_flags & PHY_PHYSICAL_LINK_FLAG) == 0)
return;
- if (!CHIP_IS_E3(bp) &&
+ if (CHIP_IS_E3(bp) &&
(REG_RD(bp, MISC_REG_RESET_REG_2) &
- (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << params->port))) {
+ (MISC_REGISTERS_RESET_REG_2_XMAC))) {
+ /* Check E3 XMAC */
+ /*
+ * Note that link speed cannot be queried here, since it may be
+ * zero while link is down. In case UMAC is active, LSS will
+ * simply not be set
+ */
+ mac_base = (params->port) ? GRCBASE_XMAC1 : GRCBASE_XMAC0;
+
+ /* Clear stick bits (Requires rising edge) */
+ REG_WR(bp, mac_base + XMAC_REG_CLEAR_RX_LSS_STATUS, 0);
+ REG_WR(bp, mac_base + XMAC_REG_CLEAR_RX_LSS_STATUS,
+ XMAC_CLEAR_RX_LSS_STATUS_REG_CLEAR_LOCAL_FAULT_STATUS |
+ XMAC_CLEAR_RX_LSS_STATUS_REG_CLEAR_REMOTE_FAULT_STATUS);
+ if (REG_RD(bp, mac_base + XMAC_REG_RX_LSS_STATUS))
+ lss_status = 1;
+
+ bnx2x_analyze_link_error(params, vars, lss_status);
+ } else if (REG_RD(bp, MISC_REG_RESET_REG_2) &
+ (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << params->port)) {
/* Check E1X / E2 BMAC */
u32 lss_status_reg;
u32 wb_data[2];
@@ -12253,14 +12323,20 @@ static void bnx2x_check_half_open_conn(struct link_params *params,
void bnx2x_period_func(struct link_params *params, struct link_vars *vars)
{
struct bnx2x *bp = params->bp;
+ u16 phy_idx;
if (!params) {
- DP(NETIF_MSG_LINK, "Ininitliazed params !\n");
+ DP(NETIF_MSG_LINK, "Uninitialized params !\n");
return;
}
- /* DP(NETIF_MSG_LINK, "Periodic called vars->phy_flags 0x%x speed 0x%x
- RESET_REG_2 0x%x\n", vars->phy_flags, vars->line_speed,
- REG_RD(bp, MISC_REG_RESET_REG_2)); */
- bnx2x_check_half_open_conn(params, vars);
+
+ for (phy_idx = INT_PHY; phy_idx < MAX_PHYS; phy_idx++) {
+ if (params->phy[phy_idx].flags & FLAGS_TX_ERROR_CHECK) {
+ bnx2x_set_aer_mmd(params, &params->phy[phy_idx]);
+ bnx2x_check_half_open_conn(params, vars);
+ break;
+ }
+ }
+
if (CHIP_IS_E3(bp))
bnx2x_check_over_curr(params, vars);
}
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-13 22:59:19 +0000