summaryrefslogtreecommitdiffstats
path: root/drivers/net/dsa/mv88e6xxx/mv88e6xxx.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/dsa/mv88e6xxx/mv88e6xxx.h')
-rw-r--r--drivers/net/dsa/mv88e6xxx/mv88e6xxx.h129
1 files changed, 96 insertions, 33 deletions
diff --git a/drivers/net/dsa/mv88e6xxx/mv88e6xxx.h b/drivers/net/dsa/mv88e6xxx/mv88e6xxx.h
index af54baea47cf..6033f2f6260a 100644
--- a/drivers/net/dsa/mv88e6xxx/mv88e6xxx.h
+++ b/drivers/net/dsa/mv88e6xxx/mv88e6xxx.h
@@ -15,6 +15,7 @@
#include <linux/if_vlan.h>
#include <linux/irq.h>
#include <linux/gpio/consumer.h>
+#include <linux/phy.h>
#ifndef UINT64_MAX
#define UINT64_MAX (u64)(~((u64)0))
@@ -58,6 +59,9 @@
#define PORT_STATUS_CMODE_100BASE_X 0x8
#define PORT_STATUS_CMODE_1000BASE_X 0x9
#define PORT_STATUS_CMODE_SGMII 0xa
+#define PORT_STATUS_CMODE_2500BASEX 0xb
+#define PORT_STATUS_CMODE_XAUI 0xc
+#define PORT_STATUS_CMODE_RXAUI 0xd
#define PORT_PCS_CTRL 0x01
#define PORT_PCS_CTRL_RGMII_DELAY_RXCLK BIT(15)
#define PORT_PCS_CTRL_RGMII_DELAY_TXCLK BIT(14)
@@ -87,6 +91,7 @@
#define PORT_SWITCH_ID_PROD_NUM_6131 0x106
#define PORT_SWITCH_ID_PROD_NUM_6320 0x115
#define PORT_SWITCH_ID_PROD_NUM_6123 0x121
+#define PORT_SWITCH_ID_PROD_NUM_6141 0x340
#define PORT_SWITCH_ID_PROD_NUM_6161 0x161
#define PORT_SWITCH_ID_PROD_NUM_6165 0x165
#define PORT_SWITCH_ID_PROD_NUM_6171 0x171
@@ -100,6 +105,7 @@
#define PORT_SWITCH_ID_PROD_NUM_6240 0x240
#define PORT_SWITCH_ID_PROD_NUM_6290 0x290
#define PORT_SWITCH_ID_PROD_NUM_6321 0x310
+#define PORT_SWITCH_ID_PROD_NUM_6341 0x341
#define PORT_SWITCH_ID_PROD_NUM_6352 0x352
#define PORT_SWITCH_ID_PROD_NUM_6350 0x371
#define PORT_SWITCH_ID_PROD_NUM_6351 0x375
@@ -163,6 +169,7 @@
#define PORT_CONTROL_2_FORWARD_UNKNOWN BIT(6)
#define PORT_CONTROL_2_EGRESS_MONITOR BIT(5)
#define PORT_CONTROL_2_INGRESS_MONITOR BIT(4)
+#define PORT_CONTROL_2_UPSTREAM_MASK 0x0f
#define PORT_RATE_CONTROL 0x09
#define PORT_RATE_CONTROL_2 0x0a
#define PORT_ASSOC_VECTOR 0x0b
@@ -332,6 +339,7 @@
#define GLOBAL_STATS_COUNTER_01 0x1f
#define GLOBAL2_INT_SOURCE 0x00
+#define GLOBAL2_INT_SOURCE_WATCHDOG 15
#define GLOBAL2_INT_MASK 0x01
#define GLOBAL2_MGMT_EN_2X 0x02
#define GLOBAL2_MGMT_EN_0X 0x03
@@ -382,10 +390,12 @@
#define GLOBAL2_EEPROM_CMD_WRITE_EN BIT(10)
#define GLOBAL2_EEPROM_CMD_ADDR_MASK 0xff
#define GLOBAL2_EEPROM_DATA 0x15
+#define GLOBAL2_EEPROM_ADDR 0x15 /* 6390, 6341 */
#define GLOBAL2_PTP_AVB_OP 0x16
#define GLOBAL2_PTP_AVB_DATA 0x17
#define GLOBAL2_SMI_PHY_CMD 0x18
#define GLOBAL2_SMI_PHY_CMD_BUSY BIT(15)
+#define GLOBAL2_SMI_PHY_CMD_EXTERNAL BIT(13)
#define GLOBAL2_SMI_PHY_CMD_MODE_22 BIT(12)
#define GLOBAL2_SMI_PHY_CMD_OP_22_WRITE_DATA ((0x1 << 10) | \
GLOBAL2_SMI_PHY_CMD_MODE_22 | \
@@ -393,12 +403,38 @@
#define GLOBAL2_SMI_PHY_CMD_OP_22_READ_DATA ((0x2 << 10) | \
GLOBAL2_SMI_PHY_CMD_MODE_22 | \
GLOBAL2_SMI_PHY_CMD_BUSY)
+#define GLOBAL2_SMI_PHY_CMD_OP_45_WRITE_ADDR ((0x0 << 10) | \
+ GLOBAL2_SMI_PHY_CMD_BUSY)
+#define GLOBAL2_SMI_PHY_CMD_OP_45_WRITE_DATA ((0x1 << 10) | \
+ GLOBAL2_SMI_PHY_CMD_BUSY)
+#define GLOBAL2_SMI_PHY_CMD_OP_45_READ_DATA ((0x3 << 10) | \
+ GLOBAL2_SMI_PHY_CMD_BUSY)
+
#define GLOBAL2_SMI_PHY_DATA 0x19
#define GLOBAL2_SCRATCH_MISC 0x1a
#define GLOBAL2_SCRATCH_BUSY BIT(15)
#define GLOBAL2_SCRATCH_REGISTER_SHIFT 8
#define GLOBAL2_SCRATCH_VALUE_MASK 0xff
#define GLOBAL2_WDOG_CONTROL 0x1b
+#define GLOBAL2_WDOG_CONTROL_EGRESS_EVENT BIT(7)
+#define GLOBAL2_WDOG_CONTROL_RMU_TIMEOUT BIT(6)
+#define GLOBAL2_WDOG_CONTROL_QC_ENABLE BIT(5)
+#define GLOBAL2_WDOG_CONTROL_EGRESS_HISTORY BIT(4)
+#define GLOBAL2_WDOG_CONTROL_EGRESS_ENABLE BIT(3)
+#define GLOBAL2_WDOG_CONTROL_FORCE_IRQ BIT(2)
+#define GLOBAL2_WDOG_CONTROL_HISTORY BIT(1)
+#define GLOBAL2_WDOG_CONTROL_SWRESET BIT(0)
+#define GLOBAL2_WDOG_UPDATE BIT(15)
+#define GLOBAL2_WDOG_INT_SOURCE (0x00 << 8)
+#define GLOBAL2_WDOG_INT_STATUS (0x10 << 8)
+#define GLOBAL2_WDOG_INT_ENABLE (0x11 << 8)
+#define GLOBAL2_WDOG_EVENT (0x12 << 8)
+#define GLOBAL2_WDOG_HISTORY (0x13 << 8)
+#define GLOBAL2_WDOG_DATA_MASK 0xff
+#define GLOBAL2_WDOG_CUT_THROUGH BIT(3)
+#define GLOBAL2_WDOG_QUEUE_CONTROLLER BIT(2)
+#define GLOBAL2_WDOG_EGRESS BIT(1)
+#define GLOBAL2_WDOG_FORCE_IRQ BIT(0)
#define GLOBAL2_QOS_WEIGHT 0x1c
#define GLOBAL2_MISC 0x1d
@@ -418,6 +454,7 @@ enum mv88e6xxx_model {
MV88E6097,
MV88E6123,
MV88E6131,
+ MV88E6141,
MV88E6161,
MV88E6165,
MV88E6171,
@@ -432,6 +469,7 @@ enum mv88e6xxx_model {
MV88E6290,
MV88E6320,
MV88E6321,
+ MV88E6341,
MV88E6350,
MV88E6351,
MV88E6352,
@@ -447,6 +485,7 @@ enum mv88e6xxx_family {
MV88E6XXX_FAMILY_6165, /* 6123 6161 6165 */
MV88E6XXX_FAMILY_6185, /* 6108 6121 6122 6131 6152 6155 6182 6185 */
MV88E6XXX_FAMILY_6320, /* 6320 6321 */
+ MV88E6XXX_FAMILY_6341, /* 6141 6341 */
MV88E6XXX_FAMILY_6351, /* 6171 6175 6350 6351 */
MV88E6XXX_FAMILY_6352, /* 6172 6176 6240 6352 */
MV88E6XXX_FAMILY_6390, /* 6190 6190X 6191 6290 6390 6390X */
@@ -496,12 +535,6 @@ enum mv88e6xxx_cap {
*/
MV88E6XXX_CAP_STU,
- /* Internal temperature sensor.
- * Available from any enabled port's PHY register 26, page 6.
- */
- MV88E6XXX_CAP_TEMP,
- MV88E6XXX_CAP_TEMP_LIMIT,
-
/* VLAN Table Unit.
* The VTU is used to program 802.1Q VLANs. See GLOBAL_VTU_OP.
*/
@@ -532,8 +565,6 @@ enum mv88e6xxx_cap {
#define MV88E6XXX_FLAG_G2_POT BIT_ULL(MV88E6XXX_CAP_G2_POT)
#define MV88E6XXX_FLAG_STU BIT_ULL(MV88E6XXX_CAP_STU)
-#define MV88E6XXX_FLAG_TEMP BIT_ULL(MV88E6XXX_CAP_TEMP)
-#define MV88E6XXX_FLAG_TEMP_LIMIT BIT_ULL(MV88E6XXX_CAP_TEMP_LIMIT)
#define MV88E6XXX_FLAG_VTU BIT_ULL(MV88E6XXX_CAP_VTU)
/* Ingress Rate Limit unit */
@@ -566,6 +597,7 @@ enum mv88e6xxx_cap {
(MV88E6XXX_FLAG_G1_ATU_FID | \
MV88E6XXX_FLAG_G1_VTU_FID | \
MV88E6XXX_FLAG_GLOBAL2 | \
+ MV88E6XXX_FLAG_G2_INT | \
MV88E6XXX_FLAG_G2_MGMT_EN_2X | \
MV88E6XXX_FLAG_G2_MGMT_EN_0X | \
MV88E6XXX_FLAG_G2_POT | \
@@ -584,7 +616,6 @@ enum mv88e6xxx_cap {
MV88E6XXX_FLAG_G2_MGMT_EN_0X | \
MV88E6XXX_FLAG_G2_POT | \
MV88E6XXX_FLAG_STU | \
- MV88E6XXX_FLAG_TEMP | \
MV88E6XXX_FLAG_VTU | \
MV88E6XXX_FLAGS_IRL | \
MV88E6XXX_FLAGS_MULTI_CHIP | \
@@ -603,13 +634,25 @@ enum mv88e6xxx_cap {
MV88E6XXX_FLAG_G2_MGMT_EN_2X | \
MV88E6XXX_FLAG_G2_MGMT_EN_0X | \
MV88E6XXX_FLAG_G2_POT | \
- MV88E6XXX_FLAG_TEMP | \
- MV88E6XXX_FLAG_TEMP_LIMIT | \
MV88E6XXX_FLAG_VTU | \
MV88E6XXX_FLAGS_IRL | \
MV88E6XXX_FLAGS_MULTI_CHIP | \
MV88E6XXX_FLAGS_PVT)
+#define MV88E6XXX_FLAGS_FAMILY_6341 \
+ (MV88E6XXX_FLAG_EEE | \
+ MV88E6XXX_FLAG_G1_ATU_FID | \
+ MV88E6XXX_FLAG_G1_VTU_FID | \
+ MV88E6XXX_FLAG_GLOBAL2 | \
+ MV88E6XXX_FLAG_G2_INT | \
+ MV88E6XXX_FLAG_G2_POT | \
+ MV88E6XXX_FLAG_STU | \
+ MV88E6XXX_FLAG_VTU | \
+ MV88E6XXX_FLAGS_IRL | \
+ MV88E6XXX_FLAGS_MULTI_CHIP | \
+ MV88E6XXX_FLAGS_PVT | \
+ MV88E6XXX_FLAGS_SERDES)
+
#define MV88E6XXX_FLAGS_FAMILY_6351 \
(MV88E6XXX_FLAG_G1_ATU_FID | \
MV88E6XXX_FLAG_G1_VTU_FID | \
@@ -619,7 +662,6 @@ enum mv88e6xxx_cap {
MV88E6XXX_FLAG_G2_MGMT_EN_0X | \
MV88E6XXX_FLAG_G2_POT | \
MV88E6XXX_FLAG_STU | \
- MV88E6XXX_FLAG_TEMP | \
MV88E6XXX_FLAG_VTU | \
MV88E6XXX_FLAGS_IRL | \
MV88E6XXX_FLAGS_MULTI_CHIP | \
@@ -635,27 +677,24 @@ enum mv88e6xxx_cap {
MV88E6XXX_FLAG_G2_MGMT_EN_0X | \
MV88E6XXX_FLAG_G2_POT | \
MV88E6XXX_FLAG_STU | \
- MV88E6XXX_FLAG_TEMP | \
- MV88E6XXX_FLAG_TEMP_LIMIT | \
MV88E6XXX_FLAG_VTU | \
MV88E6XXX_FLAGS_IRL | \
MV88E6XXX_FLAGS_MULTI_CHIP | \
MV88E6XXX_FLAGS_PVT | \
MV88E6XXX_FLAGS_SERDES)
-struct mv88e6xxx_ops;
-
#define MV88E6XXX_FLAGS_FAMILY_6390 \
(MV88E6XXX_FLAG_EEE | \
MV88E6XXX_FLAG_GLOBAL2 | \
+ MV88E6XXX_FLAG_G2_INT | \
MV88E6XXX_FLAG_STU | \
- MV88E6XXX_FLAG_TEMP | \
- MV88E6XXX_FLAG_TEMP_LIMIT | \
MV88E6XXX_FLAG_VTU | \
MV88E6XXX_FLAGS_IRL | \
MV88E6XXX_FLAGS_MULTI_CHIP | \
MV88E6XXX_FLAGS_PVT)
+struct mv88e6xxx_ops;
+
struct mv88e6xxx_info {
enum mv88e6xxx_family family;
u16 prod_num;
@@ -688,10 +727,7 @@ struct mv88e6xxx_vtu_entry {
};
struct mv88e6xxx_bus_ops;
-
-struct mv88e6xxx_priv_port {
- struct net_device *bridge_dev;
-};
+struct mv88e6xxx_irq_ops;
struct mv88e6xxx_irq {
u16 masked;
@@ -733,8 +769,6 @@ struct mv88e6xxx_chip {
*/
struct mutex stats_mutex;
- struct mv88e6xxx_priv_port ports[DSA_MAX_PORTS];
-
/* A switch may have a GPIO line tied to its reset pin. Parse
* this from the device tree, and use it before performing
* switch soft reset.
@@ -744,11 +778,8 @@ struct mv88e6xxx_chip {
/* set to size of eeprom if supported by the switch */
int eeprom_len;
- /* Device node for the MDIO bus */
- struct device_node *mdio_np;
-
- /* And the MDIO bus itself */
- struct mii_bus *mdio_bus;
+ /* List of mdio busses */
+ struct list_head mdios;
/* There can be two interrupt controllers, which are chained
* off a GPIO as interrupt source
@@ -757,6 +788,7 @@ struct mv88e6xxx_chip {
struct mv88e6xxx_irq g2_irq;
int irq;
int device_irq;
+ int watchdog_irq;
};
struct mv88e6xxx_bus_ops {
@@ -764,6 +796,13 @@ struct mv88e6xxx_bus_ops {
int (*write)(struct mv88e6xxx_chip *chip, int addr, int reg, u16 val);
};
+struct mv88e6xxx_mdio_bus {
+ struct mii_bus *bus;
+ struct mv88e6xxx_chip *chip;
+ struct list_head list;
+ bool external;
+};
+
struct mv88e6xxx_ops {
int (*get_eeprom)(struct mv88e6xxx_chip *chip,
struct ethtool_eeprom *eeprom, u8 *data);
@@ -772,10 +811,12 @@ struct mv88e6xxx_ops {
int (*set_switch_mac)(struct mv88e6xxx_chip *chip, u8 *addr);
- int (*phy_read)(struct mv88e6xxx_chip *chip, int addr, int reg,
- u16 *val);
- int (*phy_write)(struct mv88e6xxx_chip *chip, int addr, int reg,
- u16 val);
+ int (*phy_read)(struct mv88e6xxx_chip *chip,
+ struct mii_bus *bus,
+ int addr, int reg, u16 *val);
+ int (*phy_write)(struct mv88e6xxx_chip *chip,
+ struct mii_bus *bus,
+ int addr, int reg, u16 val);
/* PHY Polling Unit (PPU) operations */
int (*ppu_enable)(struct mv88e6xxx_chip *chip);
@@ -832,6 +873,18 @@ struct mv88e6xxx_ops {
int (*port_egress_rate_limiting)(struct mv88e6xxx_chip *chip, int port);
int (*port_pause_config)(struct mv88e6xxx_chip *chip, int port);
+ /* CMODE control what PHY mode the MAC will use, eg. SGMII, RGMII, etc.
+ * Some chips allow this to be configured on specific ports.
+ */
+ int (*port_set_cmode)(struct mv88e6xxx_chip *chip, int port,
+ phy_interface_t mode);
+
+ /* Some devices have a per port register indicating what is
+ * the upstream port this port should forward to.
+ */
+ int (*port_set_upstream_port)(struct mv88e6xxx_chip *chip, int port,
+ int upstream_port);
+
/* Snapshot the statistics for a port. The statistics can then
* be read back a leisure but still with a consistent view.
*/
@@ -849,11 +902,21 @@ struct mv88e6xxx_ops {
uint64_t *data);
int (*g1_set_cpu_port)(struct mv88e6xxx_chip *chip, int port);
int (*g1_set_egress_port)(struct mv88e6xxx_chip *chip, int port);
+ const struct mv88e6xxx_irq_ops *watchdog_ops;
/* Can be either in g1 or g2, so don't use a prefix */
int (*mgmt_rsvd2cpu)(struct mv88e6xxx_chip *chip);
};
+struct mv88e6xxx_irq_ops {
+ /* Action to be performed when the interrupt happens */
+ int (*irq_action)(struct mv88e6xxx_chip *chip, int irq);
+ /* Setup the hardware to generate the interrupt */
+ int (*irq_setup)(struct mv88e6xxx_chip *chip);
+ /* Reset the hardware to stop generating the interrupt */
+ void (*irq_free)(struct mv88e6xxx_chip *chip);
+};
+
#define STATS_TYPE_PORT BIT(0)
#define STATS_TYPE_BANK0 BIT(1)
#define STATS_TYPE_BANK1 BIT(2)
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-18 12:30:17 +0000