diff options
Diffstat (limited to 'drivers/net/ethernet/intel/e1000e/ich8lan.c')
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/ich8lan.c | 32 |
1 files changed, 17 insertions, 15 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index f3282dc5588e..8e9af624d54a 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -324,7 +324,7 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw) phy->ops.power_down = e1000_power_down_phy_copper_ich8lan; phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; - if (!e1000_check_reset_block(hw)) { + if (!hw->phy.ops.check_reset_block(hw)) { u32 fwsm = er32(FWSM); /* @@ -580,7 +580,7 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_hw *hw) /* check management mode */ mac->ops.check_mng_mode = e1000_check_mng_mode_ich8lan; /* ID LED init */ - mac->ops.id_led_init = e1000e_id_led_init; + mac->ops.id_led_init = e1000e_id_led_init_generic; /* blink LED */ mac->ops.blink_led = e1000e_blink_led_generic; /* setup LED */ @@ -746,7 +746,7 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) * of MAC speed/duplex configuration. So we only need to * configure Collision Distance in the MAC. */ - e1000e_config_collision_dist(hw); + mac->ops.config_collision_dist(hw); /* * Configure Flow Control now that Auto-Neg has completed. @@ -1314,7 +1314,7 @@ static s32 e1000_oem_bits_config_ich8lan(struct e1000_hw *hw, bool d0_state) oem_reg |= HV_OEM_BITS_LPLU; /* Set Restart auto-neg to activate the bits */ - if (!e1000_check_reset_block(hw)) + if (!hw->phy.ops.check_reset_block(hw)) oem_reg |= HV_OEM_BITS_RESTART_AN; } else { if (mac_reg & (E1000_PHY_CTRL_GBE_DISABLE | @@ -1788,7 +1788,7 @@ static s32 e1000_post_phy_reset_ich8lan(struct e1000_hw *hw) s32 ret_val = 0; u16 reg; - if (e1000_check_reset_block(hw)) + if (hw->phy.ops.check_reset_block(hw)) return 0; /* Allow time for h/w to get to quiescent state after reset */ @@ -1897,7 +1897,7 @@ static s32 e1000_set_lplu_state_pchlan(struct e1000_hw *hw, bool active) else oem_reg &= ~HV_OEM_BITS_LPLU; - if (!e1000_check_reset_block(hw)) + if (!hw->phy.ops.check_reset_block(hw)) oem_reg |= HV_OEM_BITS_RESTART_AN; return e1e_wphy(hw, HV_OEM_BITS, oem_reg); @@ -2609,7 +2609,7 @@ release: * until after the next adapter reset. */ if (!ret_val) { - e1000e_reload_nvm(hw); + nvm->ops.reload(hw); usleep_range(10000, 20000); } @@ -2962,7 +2962,7 @@ static s32 e1000_valid_led_default_ich8lan(struct e1000_hw *hw, u16 *data) * * PCH also does not have an "always on" or "always off" mode which * complicates the ID feature. Instead of using the "on" mode to indicate - * in ledctl_mode2 the LEDs to use for ID (see e1000e_id_led_init()), + * in ledctl_mode2 the LEDs to use for ID (see e1000e_id_led_init_generic()), * use "link_up" mode. The LEDs will still ID on request if there is no * link based on logic in e1000_led_[on|off]_pchlan(). **/ @@ -3109,7 +3109,7 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) ctrl = er32(CTRL); - if (!e1000_check_reset_block(hw)) { + if (!hw->phy.ops.check_reset_block(hw)) { /* * Full-chip reset requires MAC and PHY reset at the same * time to make sure the interface between MAC and the @@ -3212,7 +3212,7 @@ static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw) } /* Setup link and flow control */ - ret_val = e1000_setup_link_ich8lan(hw); + ret_val = mac->ops.setup_link(hw); /* Set the transmit descriptor write-back policy for both queues */ txdctl = er32(TXDCTL(0)); @@ -3327,7 +3327,7 @@ static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw) { s32 ret_val; - if (e1000_check_reset_block(hw)) + if (hw->phy.ops.check_reset_block(hw)) return 0; /* @@ -3353,7 +3353,7 @@ static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw) hw->fc.current_mode); /* Continue to configure the copper link. */ - ret_val = e1000_setup_copper_link_ich8lan(hw); + ret_val = hw->mac.ops.setup_physical_interface(hw); if (ret_val) return ret_val; @@ -3555,7 +3555,7 @@ static s32 e1000_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw) } /** - * e1000_set_kmrn_lock_loss_workaround_ich8lan - Set Kumeran workaround state + * e1000e_set_kmrn_lock_loss_workaround_ich8lan - Set Kumeran workaround state * @hw: pointer to the HW structure * @state: boolean value used to set the current Kumeran workaround state * @@ -3707,7 +3707,8 @@ void e1000_resume_workarounds_pchlan(struct e1000_hw *hw) u16 phy_id1, phy_id2; s32 ret_val; - if ((hw->mac.type != e1000_pch2lan) || e1000_check_reset_block(hw)) + if ((hw->mac.type != e1000_pch2lan) || + hw->phy.ops.check_reset_block(hw)) return; ret_val = hw->phy.ops.acquire(hw); @@ -4006,7 +4007,6 @@ release: } static const struct e1000_mac_operations ich8_mac_ops = { - .id_led_init = e1000e_id_led_init, /* check_mng_mode dependent on mac type */ .check_for_link = e1000_check_for_copper_link_ich8lan, /* cleanup_led dependent on mac type */ @@ -4022,6 +4022,7 @@ static const struct e1000_mac_operations ich8_mac_ops = { .setup_link = e1000_setup_link_ich8lan, .setup_physical_interface= e1000_setup_copper_link_ich8lan, /* id_led_init dependent on mac type */ + .config_collision_dist = e1000e_config_collision_dist_generic, }; static const struct e1000_phy_operations ich8_phy_ops = { @@ -4042,6 +4043,7 @@ static const struct e1000_nvm_operations ich8_nvm_ops = { .acquire = e1000_acquire_nvm_ich8lan, .read = e1000_read_nvm_ich8lan, .release = e1000_release_nvm_ich8lan, + .reload = e1000e_reload_nvm_generic, .update = e1000_update_nvm_checksum_ich8lan, .valid_led_default = e1000_valid_led_default_ich8lan, .validate = e1000_validate_nvm_checksum_ich8lan, |