diff options
Diffstat (limited to 'drivers/net/ethernet/mellanox/mlxsw/reg.h')
| -rw-r--r-- | drivers/net/ethernet/mellanox/mlxsw/reg.h | 124 |
1 files changed, 83 insertions, 41 deletions
diff --git a/drivers/net/ethernet/mellanox/mlxsw/reg.h b/drivers/net/ethernet/mellanox/mlxsw/reg.h index 2bc5a9003c6d..6fbda6ebd590 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/reg.h +++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h @@ -8305,6 +8305,8 @@ enum { MLXSW_REG_RECR2_TCP_UDP_EN_IPV4 = 7, /* Enable TCP/UDP header fields if packet is IPv6 */ MLXSW_REG_RECR2_TCP_UDP_EN_IPV6 = 8, + + __MLXSW_REG_RECR2_HEADER_CNT, }; /* reg_recr2_outer_header_enables @@ -8339,6 +8341,8 @@ enum { MLXSW_REG_RECR2_TCP_UDP_SPORT = 74, /* TCP/UDP Destination Port */ MLXSW_REG_RECR2_TCP_UDP_DPORT = 75, + + __MLXSW_REG_RECR2_FIELD_CNT, }; /* reg_recr2_outer_header_fields_enable @@ -8347,47 +8351,47 @@ enum { */ MLXSW_ITEM_BIT_ARRAY(reg, recr2, outer_header_fields_enable, 0x14, 0x14, 1); -static inline void mlxsw_reg_recr2_ipv4_sip_enable(char *payload) -{ - int i; - - for (i = MLXSW_REG_RECR2_IPV4_SIP0; i <= MLXSW_REG_RECR2_IPV4_SIP3; i++) - mlxsw_reg_recr2_outer_header_fields_enable_set(payload, i, - true); -} - -static inline void mlxsw_reg_recr2_ipv4_dip_enable(char *payload) -{ - int i; - - for (i = MLXSW_REG_RECR2_IPV4_DIP0; i <= MLXSW_REG_RECR2_IPV4_DIP3; i++) - mlxsw_reg_recr2_outer_header_fields_enable_set(payload, i, - true); -} - -static inline void mlxsw_reg_recr2_ipv6_sip_enable(char *payload) -{ - int i = MLXSW_REG_RECR2_IPV6_SIP0_7; - - mlxsw_reg_recr2_outer_header_fields_enable_set(payload, i, true); - - i = MLXSW_REG_RECR2_IPV6_SIP8; - for (; i <= MLXSW_REG_RECR2_IPV6_SIP15; i++) - mlxsw_reg_recr2_outer_header_fields_enable_set(payload, i, - true); -} - -static inline void mlxsw_reg_recr2_ipv6_dip_enable(char *payload) -{ - int i = MLXSW_REG_RECR2_IPV6_DIP0_7; - - mlxsw_reg_recr2_outer_header_fields_enable_set(payload, i, true); +/* reg_recr2_inner_header_enables + * Bit mask where each bit enables a specific inner layer to be included in the + * hash calculation. Same values as reg_recr2_outer_header_enables. + * Access: RW + */ +MLXSW_ITEM_BIT_ARRAY(reg, recr2, inner_header_enables, 0x2C, 0x04, 1); - i = MLXSW_REG_RECR2_IPV6_DIP8; - for (; i <= MLXSW_REG_RECR2_IPV6_DIP15; i++) - mlxsw_reg_recr2_outer_header_fields_enable_set(payload, i, - true); -} +enum { + /* Inner IPv4 Source IP */ + MLXSW_REG_RECR2_INNER_IPV4_SIP0 = 3, + MLXSW_REG_RECR2_INNER_IPV4_SIP3 = 6, + /* Inner IPv4 Destination IP */ + MLXSW_REG_RECR2_INNER_IPV4_DIP0 = 7, + MLXSW_REG_RECR2_INNER_IPV4_DIP3 = 10, + /* Inner IP Protocol */ + MLXSW_REG_RECR2_INNER_IPV4_PROTOCOL = 11, + /* Inner IPv6 Source IP */ + MLXSW_REG_RECR2_INNER_IPV6_SIP0_7 = 12, + MLXSW_REG_RECR2_INNER_IPV6_SIP8 = 20, + MLXSW_REG_RECR2_INNER_IPV6_SIP15 = 27, + /* Inner IPv6 Destination IP */ + MLXSW_REG_RECR2_INNER_IPV6_DIP0_7 = 28, + MLXSW_REG_RECR2_INNER_IPV6_DIP8 = 36, + MLXSW_REG_RECR2_INNER_IPV6_DIP15 = 43, + /* Inner IPv6 Next Header */ + MLXSW_REG_RECR2_INNER_IPV6_NEXT_HEADER = 44, + /* Inner IPv6 Flow Label */ + MLXSW_REG_RECR2_INNER_IPV6_FLOW_LABEL = 45, + /* Inner TCP/UDP Source Port */ + MLXSW_REG_RECR2_INNER_TCP_UDP_SPORT = 46, + /* Inner TCP/UDP Destination Port */ + MLXSW_REG_RECR2_INNER_TCP_UDP_DPORT = 47, + + __MLXSW_REG_RECR2_INNER_FIELD_CNT, +}; + +/* reg_recr2_inner_header_fields_enable + * Inner packet fields to enable for ECMP hash subject to inner_header_enables. + * Access: RW + */ +MLXSW_ITEM_BIT_ARRAY(reg, recr2, inner_header_fields_enable, 0x30, 0x08, 1); static inline void mlxsw_reg_recr2_pack(char *payload, u32 seed) { @@ -9459,6 +9463,14 @@ MLXSW_ITEM32(reg, mtmp, sensor_index, 0x00, 0, 12); ((s16)((GENMASK(15, 0) + (v_) + 1) \ * 125)); }) +/* reg_mtmp_max_operational_temperature + * The highest temperature in the nominal operational range. Reading is in + * 0.125 Celsius degrees units. + * In case of module this is SFF critical temperature threshold. + * Access: RO + */ +MLXSW_ITEM32(reg, mtmp, max_operational_temperature, 0x04, 16, 16); + /* reg_mtmp_temperature * Temperature reading from the sensor. Reading is in 0.125 Celsius * degrees units. @@ -9537,7 +9549,9 @@ static inline void mlxsw_reg_mtmp_pack(char *payload, u16 sensor_index, } static inline void mlxsw_reg_mtmp_unpack(char *payload, int *p_temp, - int *p_max_temp, char *sensor_name) + int *p_max_temp, int *p_temp_hi, + int *p_max_oper_temp, + char *sensor_name) { s16 temp; @@ -9549,6 +9563,14 @@ static inline void mlxsw_reg_mtmp_unpack(char *payload, int *p_temp, temp = mlxsw_reg_mtmp_max_temperature_get(payload); *p_max_temp = MLXSW_REG_MTMP_TEMP_TO_MC(temp); } + if (p_temp_hi) { + temp = mlxsw_reg_mtmp_temperature_threshold_hi_get(payload); + *p_temp_hi = MLXSW_REG_MTMP_TEMP_TO_MC(temp); + } + if (p_max_oper_temp) { + temp = mlxsw_reg_mtmp_max_operational_temperature_get(payload); + *p_max_oper_temp = MLXSW_REG_MTMP_TEMP_TO_MC(temp); + } if (sensor_name) mlxsw_reg_mtmp_sensor_name_memcpy_from(payload, sensor_name); } @@ -9668,6 +9690,20 @@ MLXSW_ITEM32(reg, mcia, l, 0x00, 31, 1); */ MLXSW_ITEM32(reg, mcia, module, 0x00, 16, 8); +enum { + MLXSW_REG_MCIA_STATUS_GOOD = 0, + /* No response from module's EEPROM. */ + MLXSW_REG_MCIA_STATUS_NO_EEPROM_MODULE = 1, + /* Module type not supported by the device. */ + MLXSW_REG_MCIA_STATUS_MODULE_NOT_SUPPORTED = 2, + /* No module present indication. */ + MLXSW_REG_MCIA_STATUS_MODULE_NOT_CONNECTED = 3, + /* Error occurred while trying to access module's EEPROM using I2C. */ + MLXSW_REG_MCIA_STATUS_I2C_ERROR = 9, + /* Module is disabled. */ + MLXSW_REG_MCIA_STATUS_MODULE_DISABLED = 16, +}; + /* reg_mcia_status * Module status. * Access: RO @@ -9692,6 +9728,12 @@ MLXSW_ITEM32(reg, mcia, page_number, 0x04, 16, 8); */ MLXSW_ITEM32(reg, mcia, device_address, 0x04, 0, 16); +/* reg_mcia_bank_number + * Bank number. + * Access: Index + */ +MLXSW_ITEM32(reg, mcia, bank_number, 0x08, 16, 8); + /* reg_mcia_size * Number of bytes to read/write (up to 48 bytes). * Access: RW |