summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/qualcomm
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/qualcomm')
-rw-r--r--drivers/net/ethernet/qualcomm/emac/Makefile4
-rw-r--r--drivers/net/ethernet/qualcomm/emac/emac-mac.c15
-rw-r--r--drivers/net/ethernet/qualcomm/emac/emac-phy.c1
-rw-r--r--drivers/net/ethernet/qualcomm/emac/emac-sgmii-fsm9900.c245
-rw-r--r--drivers/net/ethernet/qualcomm/emac/emac-sgmii-qdf2400.c217
-rw-r--r--drivers/net/ethernet/qualcomm/emac/emac-sgmii-qdf2432.c210
-rw-r--r--drivers/net/ethernet/qualcomm/emac/emac-sgmii.c569
-rw-r--r--drivers/net/ethernet/qualcomm/emac/emac-sgmii.h6
-rw-r--r--drivers/net/ethernet/qualcomm/emac/emac.c17
-rw-r--r--drivers/net/ethernet/qualcomm/qca_framing.h6
-rw-r--r--drivers/net/ethernet/qualcomm/qca_spi.c16
11 files changed, 754 insertions, 552 deletions
diff --git a/drivers/net/ethernet/qualcomm/emac/Makefile b/drivers/net/ethernet/qualcomm/emac/Makefile
index 01ee144c6386..7a6687982dae 100644
--- a/drivers/net/ethernet/qualcomm/emac/Makefile
+++ b/drivers/net/ethernet/qualcomm/emac/Makefile
@@ -4,4 +4,6 @@
obj-$(CONFIG_QCOM_EMAC) += qcom-emac.o
-qcom-emac-objs := emac.o emac-mac.o emac-phy.o emac-sgmii.o
+qcom-emac-objs := emac.o emac-mac.o emac-phy.o emac-sgmii.o \
+ emac-sgmii-fsm9900.o emac-sgmii-qdf2432.o \
+ emac-sgmii-qdf2400.o
diff --git a/drivers/net/ethernet/qualcomm/emac/emac-mac.c b/drivers/net/ethernet/qualcomm/emac/emac-mac.c
index 6fb3bee904d3..0b4deb31e742 100644
--- a/drivers/net/ethernet/qualcomm/emac/emac-mac.c
+++ b/drivers/net/ethernet/qualcomm/emac/emac-mac.c
@@ -575,10 +575,11 @@ void emac_mac_start(struct emac_adapter *adpt)
mac |= TXEN | RXEN; /* enable RX/TX */
- /* We don't have ethtool support yet, so force flow-control mode
- * to 'full' always.
- */
- mac |= TXFC | RXFC;
+ /* Configure MAC flow control to match the PHY's settings. */
+ if (phydev->pause)
+ mac |= RXFC;
+ if (phydev->pause != phydev->asym_pause)
+ mac |= TXFC;
/* setup link speed */
mac &= ~SPEED_MASK;
@@ -1003,6 +1004,12 @@ int emac_mac_up(struct emac_adapter *adpt)
writel((u32)~DIS_INT, adpt->base + EMAC_INT_STATUS);
writel(adpt->irq.mask, adpt->base + EMAC_INT_MASK);
+ /* Enable pause frames. Without this feature, the EMAC has been shown
+ * to receive (and drop) frames with FCS errors at gigabit connections.
+ */
+ adpt->phydev->supported |= SUPPORTED_Pause | SUPPORTED_Asym_Pause;
+ adpt->phydev->advertising |= SUPPORTED_Pause | SUPPORTED_Asym_Pause;
+
adpt->phydev->irq = PHY_IGNORE_INTERRUPT;
phy_start(adpt->phydev);
diff --git a/drivers/net/ethernet/qualcomm/emac/emac-phy.c b/drivers/net/ethernet/qualcomm/emac/emac-phy.c
index da4e90db4d98..99a14df28b96 100644
--- a/drivers/net/ethernet/qualcomm/emac/emac-phy.c
+++ b/drivers/net/ethernet/qualcomm/emac/emac-phy.c
@@ -212,6 +212,7 @@ int emac_phy_config(struct platform_device *pdev, struct emac_adapter *adpt)
phy_np = of_parse_phandle(np, "phy-handle", 0);
adpt->phydev = of_phy_find_device(phy_np);
+ of_node_put(phy_np);
}
if (!adpt->phydev) {
diff --git a/drivers/net/ethernet/qualcomm/emac/emac-sgmii-fsm9900.c b/drivers/net/ethernet/qualcomm/emac/emac-sgmii-fsm9900.c
new file mode 100644
index 000000000000..af690e1a6e7b
--- /dev/null
+++ b/drivers/net/ethernet/qualcomm/emac/emac-sgmii-fsm9900.c
@@ -0,0 +1,245 @@
+/* Copyright (c) 2015-2016, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/* Qualcomm Technologies, Inc. FSM9900 EMAC SGMII Controller driver.
+ */
+
+#include <linux/iopoll.h>
+#include "emac.h"
+
+/* EMAC_QSERDES register offsets */
+#define EMAC_QSERDES_COM_SYS_CLK_CTRL 0x0000
+#define EMAC_QSERDES_COM_PLL_CNTRL 0x0014
+#define EMAC_QSERDES_COM_PLL_IP_SETI 0x0018
+#define EMAC_QSERDES_COM_PLL_CP_SETI 0x0024
+#define EMAC_QSERDES_COM_PLL_IP_SETP 0x0028
+#define EMAC_QSERDES_COM_PLL_CP_SETP 0x002c
+#define EMAC_QSERDES_COM_SYSCLK_EN_SEL 0x0038
+#define EMAC_QSERDES_COM_RESETSM_CNTRL 0x0040
+#define EMAC_QSERDES_COM_PLLLOCK_CMP1 0x0044
+#define EMAC_QSERDES_COM_PLLLOCK_CMP2 0x0048
+#define EMAC_QSERDES_COM_PLLLOCK_CMP3 0x004c
+#define EMAC_QSERDES_COM_PLLLOCK_CMP_EN 0x0050
+#define EMAC_QSERDES_COM_DEC_START1 0x0064
+#define EMAC_QSERDES_COM_DIV_FRAC_START1 0x0098
+#define EMAC_QSERDES_COM_DIV_FRAC_START2 0x009c
+#define EMAC_QSERDES_COM_DIV_FRAC_START3 0x00a0
+#define EMAC_QSERDES_COM_DEC_START2 0x00a4
+#define EMAC_QSERDES_COM_PLL_CRCTRL 0x00ac
+#define EMAC_QSERDES_COM_RESET_SM 0x00bc
+#define EMAC_QSERDES_TX_BIST_MODE_LANENO 0x0100
+#define EMAC_QSERDES_TX_TX_EMP_POST1_LVL 0x0108
+#define EMAC_QSERDES_TX_TX_DRV_LVL 0x010c
+#define EMAC_QSERDES_TX_LANE_MODE 0x0150
+#define EMAC_QSERDES_TX_TRAN_DRVR_EMP_EN 0x0170
+#define EMAC_QSERDES_RX_CDR_CONTROL 0x0200
+#define EMAC_QSERDES_RX_CDR_CONTROL2 0x0210
+#define EMAC_QSERDES_RX_RX_EQ_GAIN12 0x0230
+
+/* EMAC_SGMII register offsets */
+#define EMAC_SGMII_PHY_SERDES_START 0x0000
+#define EMAC_SGMII_PHY_CMN_PWR_CTRL 0x0004
+#define EMAC_SGMII_PHY_RX_PWR_CTRL 0x0008
+#define EMAC_SGMII_PHY_TX_PWR_CTRL 0x000C
+#define EMAC_SGMII_PHY_LANE_CTRL1 0x0018
+#define EMAC_SGMII_PHY_CDR_CTRL0 0x0058
+#define EMAC_SGMII_PHY_POW_DWN_CTRL0 0x0080
+#define EMAC_SGMII_PHY_INTERRUPT_MASK 0x00b4
+
+#define PLL_IPSETI(x) ((x) & 0x3f)
+
+#define PLL_CPSETI(x) ((x) & 0xff)
+
+#define PLL_IPSETP(x) ((x) & 0x3f)
+
+#define PLL_CPSETP(x) ((x) & 0x1f)
+
+#define PLL_RCTRL(x) (((x) & 0xf) << 4)
+#define PLL_CCTRL(x) ((x) & 0xf)
+
+#define LANE_MODE(x) ((x) & 0x1f)
+
+#define SYSCLK_CM BIT(4)
+#define SYSCLK_AC_COUPLE BIT(3)
+
+#define OCP_EN BIT(5)
+#define PLL_DIV_FFEN BIT(2)
+#define PLL_DIV_ORD BIT(1)
+
+#define SYSCLK_SEL_CMOS BIT(3)
+
+#define FRQ_TUNE_MODE BIT(4)
+
+#define PLLLOCK_CMP_EN BIT(0)
+
+#define DEC_START1_MUX BIT(7)
+#define DEC_START1(x) ((x) & 0x7f)
+
+#define DIV_FRAC_START_MUX BIT(7)
+#define DIV_FRAC_START(x) ((x) & 0x7f)
+
+#define DIV_FRAC_START3_MUX BIT(4)
+#define DIV_FRAC_START3(x) ((x) & 0xf)
+
+#define DEC_START2_MUX BIT(1)
+#define DEC_START2 BIT(0)
+
+#define READY BIT(5)
+
+#define TX_EMP_POST1_LVL_MUX BIT(5)
+#define TX_EMP_POST1_LVL(x) ((x) & 0x1f)
+
+#define TX_DRV_LVL_MUX BIT(4)
+#define TX_DRV_LVL(x) ((x) & 0xf)
+
+#define EMP_EN_MUX BIT(1)
+#define EMP_EN BIT(0)
+
+#define SECONDORDERENABLE BIT(6)
+#define FIRSTORDER_THRESH(x) (((x) & 0x7) << 3)
+#define SECONDORDERGAIN(x) ((x) & 0x7)
+
+#define RX_EQ_GAIN2(x) (((x) & 0xf) << 4)
+#define RX_EQ_GAIN1(x) ((x) & 0xf)
+
+#define SERDES_START BIT(0)
+
+#define BIAS_EN BIT(6)
+#define PLL_EN BIT(5)
+#define SYSCLK_EN BIT(4)
+#define CLKBUF_L_EN BIT(3)
+#define PLL_TXCLK_EN BIT(1)
+#define PLL_RXCLK_EN BIT(0)
+
+#define L0_RX_SIGDET_EN BIT(7)
+#define L0_RX_TERM_MODE(x) (((x) & 3) << 4)
+#define L0_RX_I_EN BIT(1)
+
+#define L0_TX_EN BIT(5)
+#define L0_CLKBUF_EN BIT(4)
+#define L0_TRAN_BIAS_EN BIT(1)
+
+#define L0_RX_EQUALIZE_ENABLE BIT(6)
+#define L0_RESET_TSYNC_EN BIT(4)
+#define L0_DRV_LVL(x) ((x) & 0xf)
+
+#define PWRDN_B BIT(0)
+#define CDR_MAX_CNT(x) ((x) & 0xff)
+
+#define PLLLOCK_CMP(x) ((x) & 0xff)
+
+#define SERDES_START_WAIT_TIMES 100
+
+struct emac_reg_write {
+ unsigned int offset;
+ u32 val;
+};
+
+static void emac_reg_write_all(void __iomem *base,
+ const struct emac_reg_write *itr, size_t size)
+{
+ size_t i;
+
+ for (i = 0; i < size; ++itr, ++i)
+ writel(itr->val, base + itr->offset);
+}
+
+static const struct emac_reg_write physical_coding_sublayer_programming[] = {
+ {EMAC_SGMII_PHY_CDR_CTRL0, CDR_MAX_CNT(15)},
+ {EMAC_SGMII_PHY_POW_DWN_CTRL0, PWRDN_B},
+ {EMAC_SGMII_PHY_CMN_PWR_CTRL,
+ BIAS_EN | SYSCLK_EN | CLKBUF_L_EN | PLL_TXCLK_EN | PLL_RXCLK_EN},
+ {EMAC_SGMII_PHY_TX_PWR_CTRL, L0_TX_EN | L0_CLKBUF_EN | L0_TRAN_BIAS_EN},
+ {EMAC_SGMII_PHY_RX_PWR_CTRL,
+ L0_RX_SIGDET_EN | L0_RX_TERM_MODE(1) | L0_RX_I_EN},
+ {EMAC_SGMII_PHY_CMN_PWR_CTRL,
+ BIAS_EN | PLL_EN | SYSCLK_EN | CLKBUF_L_EN | PLL_TXCLK_EN |
+ PLL_RXCLK_EN},
+ {EMAC_SGMII_PHY_LANE_CTRL1,
+ L0_RX_EQUALIZE_ENABLE | L0_RESET_TSYNC_EN | L0_DRV_LVL(15)},
+};
+
+static const struct emac_reg_write sysclk_refclk_setting[] = {
+ {EMAC_QSERDES_COM_SYSCLK_EN_SEL, SYSCLK_SEL_CMOS},
+ {EMAC_QSERDES_COM_SYS_CLK_CTRL, SYSCLK_CM | SYSCLK_AC_COUPLE},
+};
+
+static const struct emac_reg_write pll_setting[] = {
+ {EMAC_QSERDES_COM_PLL_IP_SETI, PLL_IPSETI(1)},
+ {EMAC_QSERDES_COM_PLL_CP_SETI, PLL_CPSETI(59)},
+ {EMAC_QSERDES_COM_PLL_IP_SETP, PLL_IPSETP(10)},
+ {EMAC_QSERDES_COM_PLL_CP_SETP, PLL_CPSETP(9)},
+ {EMAC_QSERDES_COM_PLL_CRCTRL, PLL_RCTRL(15) | PLL_CCTRL(11)},
+ {EMAC_QSERDES_COM_PLL_CNTRL, OCP_EN | PLL_DIV_FFEN | PLL_DIV_ORD},
+ {EMAC_QSERDES_COM_DEC_START1, DEC_START1_MUX | DEC_START1(2)},
+ {EMAC_QSERDES_COM_DEC_START2, DEC_START2_MUX | DEC_START2},
+ {EMAC_QSERDES_COM_DIV_FRAC_START1,
+ DIV_FRAC_START_MUX | DIV_FRAC_START(85)},
+ {EMAC_QSERDES_COM_DIV_FRAC_START2,
+ DIV_FRAC_START_MUX | DIV_FRAC_START(42)},
+ {EMAC_QSERDES_COM_DIV_FRAC_START3,
+ DIV_FRAC_START3_MUX | DIV_FRAC_START3(3)},
+ {EMAC_QSERDES_COM_PLLLOCK_CMP1, PLLLOCK_CMP(43)},
+ {EMAC_QSERDES_COM_PLLLOCK_CMP2, PLLLOCK_CMP(104)},
+ {EMAC_QSERDES_COM_PLLLOCK_CMP3, PLLLOCK_CMP(0)},
+ {EMAC_QSERDES_COM_PLLLOCK_CMP_EN, PLLLOCK_CMP_EN},
+ {EMAC_QSERDES_COM_RESETSM_CNTRL, FRQ_TUNE_MODE},
+};
+
+static const struct emac_reg_write cdr_setting[] = {
+ {EMAC_QSERDES_RX_CDR_CONTROL,
+ SECONDORDERENABLE | FIRSTORDER_THRESH(3) | SECONDORDERGAIN(2)},
+ {EMAC_QSERDES_RX_CDR_CONTROL2,
+ SECONDORDERENABLE | FIRSTORDER_THRESH(3) | SECONDORDERGAIN(4)},
+};
+
+static const struct emac_reg_write tx_rx_setting[] = {
+ {EMAC_QSERDES_TX_BIST_MODE_LANENO, 0},
+ {EMAC_QSERDES_TX_TX_DRV_LVL, TX_DRV_LVL_MUX | TX_DRV_LVL(15)},
+ {EMAC_QSERDES_TX_TRAN_DRVR_EMP_EN, EMP_EN_MUX | EMP_EN},
+ {EMAC_QSERDES_TX_TX_EMP_POST1_LVL,
+ TX_EMP_POST1_LVL_MUX | TX_EMP_POST1_LVL(1)},
+ {EMAC_QSERDES_RX_RX_EQ_GAIN12, RX_EQ_GAIN2(15) | RX_EQ_GAIN1(15)},
+ {EMAC_QSERDES_TX_LANE_MODE, LANE_MODE(8)},
+};
+
+int emac_sgmii_init_fsm9900(struct emac_adapter *adpt)
+{
+ struct emac_phy *phy = &adpt->phy;
+ unsigned int i;
+
+ emac_reg_write_all(phy->base, physical_coding_sublayer_programming,
+ ARRAY_SIZE(physical_coding_sublayer_programming));
+ emac_reg_write_all(phy->base, sysclk_refclk_setting,
+ ARRAY_SIZE(sysclk_refclk_setting));
+ emac_reg_write_all(phy->base, pll_setting, ARRAY_SIZE(pll_setting));
+ emac_reg_write_all(phy->base, cdr_setting, ARRAY_SIZE(cdr_setting));
+ emac_reg_write_all(phy->base, tx_rx_setting, ARRAY_SIZE(tx_rx_setting));
+
+ /* Power up the Ser/Des engine */
+ writel(SERDES_START, phy->base + EMAC_SGMII_PHY_SERDES_START);
+
+ for (i = 0; i < SERDES_START_WAIT_TIMES; i++) {
+ if (readl(phy->base + EMAC_QSERDES_COM_RESET_SM) & READY)
+ break;
+ usleep_range(100, 200);
+ }
+
+ if (i == SERDES_START_WAIT_TIMES) {
+ netdev_err(adpt->netdev, "error: ser/des failed to start\n");
+ return -EIO;
+ }
+ /* Mask out all the SGMII Interrupt */
+ writel(0, phy->base + EMAC_SGMII_PHY_INTERRUPT_MASK);
+
+ return 0;
+}
diff --git a/drivers/net/ethernet/qualcomm/emac/emac-sgmii-qdf2400.c b/drivers/net/ethernet/qualcomm/emac/emac-sgmii-qdf2400.c
new file mode 100644
index 000000000000..5b8419498ef1
--- /dev/null
+++ b/drivers/net/ethernet/qualcomm/emac/emac-sgmii-qdf2400.c
@@ -0,0 +1,217 @@
+/* Copyright (c) 2015-2016, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/* Qualcomm Technologies, Inc. QDF2400 EMAC SGMII Controller driver.
+ */
+
+#include <linux/iopoll.h>
+#include "emac.h"
+
+/* EMAC_SGMII register offsets */
+#define EMAC_SGMII_PHY_TX_PWR_CTRL 0x000C
+#define EMAC_SGMII_PHY_LANE_CTRL1 0x0018
+#define EMAC_SGMII_PHY_CDR_CTRL0 0x0058
+#define EMAC_SGMII_PHY_POW_DWN_CTRL0 0x0080
+#define EMAC_SGMII_PHY_RESET_CTRL 0x00a8
+#define EMAC_SGMII_PHY_INTERRUPT_MASK 0x00b4
+
+/* SGMII digital lane registers */
+#define EMAC_SGMII_LN_DRVR_CTRL0 0x000C
+#define EMAC_SGMII_LN_DRVR_TAP_EN 0x0018
+#define EMAC_SGMII_LN_TX_MARGINING 0x001C
+#define EMAC_SGMII_LN_TX_PRE 0x0020
+#define EMAC_SGMII_LN_TX_POST 0x0024
+#define EMAC_SGMII_LN_TX_BAND_MODE 0x0060
+#define EMAC_SGMII_LN_LANE_MODE 0x0064
+#define EMAC_SGMII_LN_PARALLEL_RATE 0x007C
+#define EMAC_SGMII_LN_CML_CTRL_MODE0 0x00C0
+#define EMAC_SGMII_LN_MIXER_CTRL_MODE0 0x00D8
+#define EMAC_SGMII_LN_VGA_INITVAL 0x013C
+#define EMAC_SGMII_LN_UCDR_FO_GAIN_MODE0 0x0184
+#define EMAC_SGMII_LN_UCDR_SO_GAIN_MODE0 0x0190
+#define EMAC_SGMII_LN_UCDR_SO_CONFIG 0x019C
+#define EMAC_SGMII_LN_RX_BAND 0x01A4
+#define EMAC_SGMII_LN_RX_RCVR_PATH1_MODE0 0x01C0
+#define EMAC_SGMII_LN_RSM_CONFIG 0x01F8
+#define EMAC_SGMII_LN_SIGDET_ENABLES 0x0230
+#define EMAC_SGMII_LN_SIGDET_CNTRL 0x0234
+#define EMAC_SGMII_LN_SIGDET_DEGLITCH_CNTRL 0x0238
+#define EMAC_SGMII_LN_RX_EN_SIGNAL 0x02AC
+#define EMAC_SGMII_LN_RX_MISC_CNTRL0 0x02B8
+#define EMAC_SGMII_LN_DRVR_LOGIC_CLKDIV 0x02C8
+
+/* SGMII digital lane register values */
+#define UCDR_STEP_BY_TWO_MODE0 BIT(7)
+#define UCDR_xO_GAIN_MODE(x) ((x) & 0x7f)
+#define UCDR_ENABLE BIT(6)
+#define UCDR_SO_SATURATION(x) ((x) & 0x3f)
+
+#define SIGDET_LP_BYP_PS4 BIT(7)
+#define SIGDET_EN_PS0_TO_PS2 BIT(6)
+
+#define TXVAL_VALID_INIT BIT(4)
+#define KR_PCIGEN3_MODE BIT(0)
+
+#define MAIN_EN BIT(0)
+
+#define TX_MARGINING_MUX BIT(6)
+#define TX_MARGINING(x) ((x) & 0x3f)
+
+#define TX_PRE_MUX BIT(6)
+
+#define TX_POST_MUX BIT(6)
+
+#define CML_GEAR_MODE(x) (((x) & 7) << 3)
+#define CML2CMOS_IBOOST_MODE(x) ((x) & 7)
+
+#define MIXER_LOADB_MODE(x) (((x) & 0xf) << 2)
+#define MIXER_DATARATE_MODE(x) ((x) & 3)
+
+#define VGA_THRESH_DFE(x) ((x) & 0x3f)
+
+#define SIGDET_LP_BYP_PS0_TO_PS2 BIT(5)
+#define SIGDET_FLT_BYP BIT(0)
+
+#define SIGDET_LVL(x) (((x) & 0xf) << 4)
+
+#define SIGDET_DEGLITCH_CTRL(x) (((x) & 0xf) << 1)
+
+#define INVERT_PCS_RX_CLK BIT(7)
+
+#define DRVR_LOGIC_CLK_EN BIT(4)
+#define DRVR_LOGIC_CLK_DIV(x) ((x) & 0xf)
+
+#define PARALLEL_RATE_MODE0(x) ((x) & 0x3)
+
+#define BAND_MODE0(x) ((x) & 0x3)
+
+#define LANE_MODE(x) ((x) & 0x1f)
+
+#define CDR_PD_SEL_MODE0(x) (((x) & 0x3) << 5)
+#define EN_DLL_MODE0 BIT(4)
+#define EN_IQ_DCC_MODE0 BIT(3)
+#define EN_IQCAL_MODE0 BIT(2)
+
+#define BYPASS_RSM_SAMP_CAL BIT(1)
+#define BYPASS_RSM_DLL_CAL BIT(0)
+
+#define L0_RX_EQUALIZE_ENABLE BIT(6)
+
+#define PWRDN_B BIT(0)
+
+#define CDR_MAX_CNT(x) ((x) & 0xff)
+
+#define SERDES_START_WAIT_TIMES 100
+
+struct emac_reg_write {
+ unsigned int offset;
+ u32 val;
+};
+
+static void emac_reg_write_all(void __iomem *base,
+ const struct emac_reg_write *itr, size_t size)
+{
+ size_t i;
+
+ for (i = 0; i < size; ++itr, ++i)
+ writel(itr->val, base + itr->offset);
+}
+
+static const struct emac_reg_write sgmii_laned[] = {
+ /* CDR Settings */
+ {EMAC_SGMII_LN_UCDR_FO_GAIN_MODE0,
+ UCDR_STEP_BY_TWO_MODE0 | UCDR_xO_GAIN_MODE(10)},
+ {EMAC_SGMII_LN_UCDR_SO_GAIN_MODE0, UCDR_xO_GAIN_MODE(0)},
+ {EMAC_SGMII_LN_UCDR_SO_CONFIG, UCDR_ENABLE | UCDR_SO_SATURATION(12)},
+
+ /* TX/RX Settings */
+ {EMAC_SGMII_LN_RX_EN_SIGNAL, SIGDET_LP_BYP_PS4 | SIGDET_EN_PS0_TO_PS2},
+
+ {EMAC_SGMII_LN_DRVR_CTRL0, TXVAL_VALID_INIT | KR_PCIGEN3_MODE},
+ {EMAC_SGMII_LN_DRVR_TAP_EN, MAIN_EN},
+ {EMAC_SGMII_LN_TX_MARGINING, TX_MARGINING_MUX | TX_MARGINING(25)},
+ {EMAC_SGMII_LN_TX_PRE, TX_PRE_MUX},
+ {EMAC_SGMII_LN_TX_POST, TX_POST_MUX},
+
+ {EMAC_SGMII_LN_CML_CTRL_MODE0,
+ CML_GEAR_MODE(1) | CML2CMOS_IBOOST_MODE(1)},
+ {EMAC_SGMII_LN_MIXER_CTRL_MODE0,
+ MIXER_LOADB_MODE(12) | MIXER_DATARATE_MODE(1)},
+ {EMAC_SGMII_LN_VGA_INITVAL, VGA_THRESH_DFE(31)},
+ {EMAC_SGMII_LN_SIGDET_ENABLES,
+ SIGDET_LP_BYP_PS0_TO_PS2 | SIGDET_FLT_BYP},
+ {EMAC_SGMII_LN_SIGDET_CNTRL, SIGDET_LVL(8)},
+
+ {EMAC_SGMII_LN_SIGDET_DEGLITCH_CNTRL, SIGDET_DEGLITCH_CTRL(4)},
+ {EMAC_SGMII_LN_RX_MISC_CNTRL0, INVERT_PCS_RX_CLK},
+ {EMAC_SGMII_LN_DRVR_LOGIC_CLKDIV,
+ DRVR_LOGIC_CLK_EN | DRVR_LOGIC_CLK_DIV(4)},
+
+ {EMAC_SGMII_LN_PARALLEL_RATE, PARALLEL_RATE_MODE0(1)},
+ {EMAC_SGMII_LN_TX_BAND_MODE, BAND_MODE0(1)},
+ {EMAC_SGMII_LN_RX_BAND, BAND_MODE0(2)},
+ {EMAC_SGMII_LN_LANE_MODE, LANE_MODE(26)},
+ {EMAC_SGMII_LN_RX_RCVR_PATH1_MODE0, CDR_PD_SEL_MODE0(2) |
+ EN_DLL_MODE0 | EN_IQ_DCC_MODE0 | EN_IQCAL_MODE0},
+ {EMAC_SGMII_LN_RSM_CONFIG, BYPASS_RSM_SAMP_CAL | BYPASS_RSM_DLL_CAL},
+};
+
+static const struct emac_reg_write physical_coding_sublayer_programming[] = {
+ {EMAC_SGMII_PHY_POW_DWN_CTRL0, PWRDN_B},
+ {EMAC_SGMII_PHY_CDR_CTRL0, CDR_MAX_CNT(15)},
+ {EMAC_SGMII_PHY_TX_PWR_CTRL, 0},
+ {EMAC_SGMII_PHY_LANE_CTRL1, L0_RX_EQUALIZE_ENABLE},
+};
+
+int emac_sgmii_init_qdf2400(struct emac_adapter *adpt)
+{
+ struct emac_phy *phy = &adpt->phy;
+ void __iomem *phy_regs = phy->base;
+ void __iomem *laned = phy->digital;
+ unsigned int i;
+ u32 lnstatus;
+
+ /* PCS lane-x init */
+ emac_reg_write_all(phy->base, physical_coding_sublayer_programming,
+ ARRAY_SIZE(physical_coding_sublayer_programming));
+
+ /* SGMII lane-x init */
+ emac_reg_write_all(phy->digital, sgmii_laned, ARRAY_SIZE(sgmii_laned));
+
+ /* Power up PCS and start reset lane state machine */
+
+ writel(0, phy_regs + EMAC_SGMII_PHY_RESET_CTRL);
+ writel(1, laned + SGMII_LN_RSM_START);
+
+ /* Wait for c_ready assertion */
+ for (i = 0; i < SERDES_START_WAIT_TIMES; i++) {
+ lnstatus = readl(phy_regs + SGMII_PHY_LN_LANE_STATUS);
+ if (lnstatus & BIT(1))
+ break;
+ usleep_range(100, 200);
+ }
+
+ if (i == SERDES_START_WAIT_TIMES) {
+ netdev_err(adpt->netdev, "SGMII failed to start\n");
+ return -EIO;
+ }
+
+ /* Disable digital and SERDES loopback */
+ writel(0, phy_regs + SGMII_PHY_LN_BIST_GEN0);
+ writel(0, phy_regs + SGMII_PHY_LN_BIST_GEN2);
+ writel(0, phy_regs + SGMII_PHY_LN_CDR_CTRL1);
+
+ /* Mask out all the SGMII Interrupt */
+ writel(0, phy_regs + EMAC_SGMII_PHY_INTERRUPT_MASK);
+
+ return 0;
+}
diff --git a/drivers/net/ethernet/qualcomm/emac/emac-sgmii-qdf2432.c b/drivers/net/ethernet/qualcomm/emac/emac-sgmii-qdf2432.c
new file mode 100644
index 000000000000..6170200d7479
--- /dev/null
+++ b/drivers/net/ethernet/qualcomm/emac/emac-sgmii-qdf2432.c
@@ -0,0 +1,210 @@
+/* Copyright (c) 2015-2016, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/* Qualcomm Technologies, Inc. QDF2432 EMAC SGMII Controller driver.
+ */
+
+#include <linux/iopoll.h>
+#include "emac.h"
+
+/* EMAC_SGMII register offsets */
+#define EMAC_SGMII_PHY_TX_PWR_CTRL 0x000C
+#define EMAC_SGMII_PHY_LANE_CTRL1 0x0018
+#define EMAC_SGMII_PHY_CDR_CTRL0 0x0058
+#define EMAC_SGMII_PHY_POW_DWN_CTRL0 0x0080
+#define EMAC_SGMII_PHY_RESET_CTRL 0x00a8
+#define EMAC_SGMII_PHY_INTERRUPT_MASK 0x00b4
+
+/* SGMII digital lane registers */
+#define EMAC_SGMII_LN_DRVR_CTRL0 0x000C
+#define EMAC_SGMII_LN_DRVR_TAP_EN 0x0018
+#define EMAC_SGMII_LN_TX_MARGINING 0x001C
+#define EMAC_SGMII_LN_TX_PRE 0x0020
+#define EMAC_SGMII_LN_TX_POST 0x0024
+#define EMAC_SGMII_LN_TX_BAND_MODE 0x0060
+#define EMAC_SGMII_LN_LANE_MODE 0x0064
+#define EMAC_SGMII_LN_PARALLEL_RATE 0x0078
+#define EMAC_SGMII_LN_CML_CTRL_MODE0 0x00B8
+#define EMAC_SGMII_LN_MIXER_CTRL_MODE0 0x00D0
+#define EMAC_SGMII_LN_VGA_INITVAL 0x0134
+#define EMAC_SGMII_LN_UCDR_FO_GAIN_MODE0 0x017C
+#define EMAC_SGMII_LN_UCDR_SO_GAIN_MODE0 0x0188
+#define EMAC_SGMII_LN_UCDR_SO_CONFIG 0x0194
+#define EMAC_SGMII_LN_RX_BAND 0x019C
+#define EMAC_SGMII_LN_RX_RCVR_PATH1_MODE0 0x01B8
+#define EMAC_SGMII_LN_RSM_CONFIG 0x01F0
+#define EMAC_SGMII_LN_SIGDET_ENABLES 0x0224
+#define EMAC_SGMII_LN_SIGDET_CNTRL 0x0228
+#define EMAC_SGMII_LN_SIGDET_DEGLITCH_CNTRL 0x022C
+#define EMAC_SGMII_LN_RX_EN_SIGNAL 0x02A0
+#define EMAC_SGMII_LN_RX_MISC_CNTRL0 0x02AC
+#define EMAC_SGMII_LN_DRVR_LOGIC_CLKDIV 0x02BC
+
+/* SGMII digital lane register values */
+#define UCDR_STEP_BY_TWO_MODE0 BIT(7)
+#define UCDR_xO_GAIN_MODE(x) ((x) & 0x7f)
+#define UCDR_ENABLE BIT(6)
+#define UCDR_SO_SATURATION(x) ((x) & 0x3f)
+
+#define SIGDET_LP_BYP_PS4 BIT(7)
+#define SIGDET_EN_PS0_TO_PS2 BIT(6)
+
+#define TXVAL_VALID_INIT BIT(4)
+#define KR_PCIGEN3_MODE BIT(0)
+
+#define MAIN_EN BIT(0)
+
+#define TX_MARGINING_MUX BIT(6)
+#define TX_MARGINING(x) ((x) & 0x3f)
+
+#define TX_PRE_MUX BIT(6)
+
+#define TX_POST_MUX BIT(6)
+
+#define CML_GEAR_MODE(x) (((x) & 7) << 3)
+#define CML2CMOS_IBOOST_MODE(x) ((x) & 7)
+
+#define MIXER_LOADB_MODE(x) (((x) & 0xf) << 2)
+#define MIXER_DATARATE_MODE(x) ((x) & 3)
+
+#define VGA_THRESH_DFE(x) ((x) & 0x3f)
+
+#define SIGDET_LP_BYP_PS0_TO_PS2 BIT(5)
+#define SIGDET_FLT_BYP BIT(0)
+
+#define SIGDET_LVL(x) (((x) & 0xf) << 4)
+
+#define SIGDET_DEGLITCH_CTRL(x) (((x) & 0xf) << 1)
+
+#define DRVR_LOGIC_CLK_EN BIT(4)
+#define DRVR_LOGIC_CLK_DIV(x) ((x) & 0xf)
+
+#define PARALLEL_RATE_MODE0(x) ((x) & 0x3)
+
+#define BAND_MODE0(x) ((x) & 0x3)
+
+#define LANE_MODE(x) ((x) & 0x1f)
+
+#define CDR_PD_SEL_MODE0(x) (((x) & 0x3) << 5)
+#define BYPASS_RSM_SAMP_CAL BIT(1)
+#define BYPASS_RSM_DLL_CAL BIT(0)
+
+#define L0_RX_EQUALIZE_ENABLE BIT(6)
+
+#define PWRDN_B BIT(0)
+
+#define CDR_MAX_CNT(x) ((x) & 0xff)
+
+#define SERDES_START_WAIT_TIMES 100
+
+struct emac_reg_write {
+ unsigned int offset;
+ u32 val;
+};
+
+static void emac_reg_write_all(void __iomem *base,
+ const struct emac_reg_write *itr, size_t size)
+{
+ size_t i;
+
+ for (i = 0; i < size; ++itr, ++i)
+ writel(itr->val, base + itr->offset);
+}
+
+static const struct emac_reg_write sgmii_laned[] = {
+ /* CDR Settings */
+ {EMAC_SGMII_LN_UCDR_FO_GAIN_MODE0,
+ UCDR_STEP_BY_TWO_MODE0 | UCDR_xO_GAIN_MODE(10)},
+ {EMAC_SGMII_LN_UCDR_SO_GAIN_MODE0, UCDR_xO_GAIN_MODE(0)},
+ {EMAC_SGMII_LN_UCDR_SO_CONFIG, UCDR_ENABLE | UCDR_SO_SATURATION(12)},
+
+ /* TX/RX Settings */
+ {EMAC_SGMII_LN_RX_EN_SIGNAL, SIGDET_LP_BYP_PS4 | SIGDET_EN_PS0_TO_PS2},
+
+ {EMAC_SGMII_LN_DRVR_CTRL0, TXVAL_VALID_INIT | KR_PCIGEN3_MODE},
+ {EMAC_SGMII_LN_DRVR_TAP_EN, MAIN_EN},
+ {EMAC_SGMII_LN_TX_MARGINING, TX_MARGINING_MUX | TX_MARGINING(25)},
+ {EMAC_SGMII_LN_TX_PRE, TX_PRE_MUX},
+ {EMAC_SGMII_LN_TX_POST, TX_POST_MUX},
+
+ {EMAC_SGMII_LN_CML_CTRL_MODE0,
+ CML_GEAR_MODE(1) | CML2CMOS_IBOOST_MODE(1)},
+ {EMAC_SGMII_LN_MIXER_CTRL_MODE0,
+ MIXER_LOADB_MODE(12) | MIXER_DATARATE_MODE(1)},
+ {EMAC_SGMII_LN_VGA_INITVAL, VGA_THRESH_DFE(31)},
+ {EMAC_SGMII_LN_SIGDET_ENABLES,
+ SIGDET_LP_BYP_PS0_TO_PS2 | SIGDET_FLT_BYP},
+ {EMAC_SGMII_LN_SIGDET_CNTRL, SIGDET_LVL(8)},
+
+ {EMAC_SGMII_LN_SIGDET_DEGLITCH_CNTRL, SIGDET_DEGLITCH_CTRL(4)},
+ {EMAC_SGMII_LN_RX_MISC_CNTRL0, 0},
+ {EMAC_SGMII_LN_DRVR_LOGIC_CLKDIV,
+ DRVR_LOGIC_CLK_EN | DRVR_LOGIC_CLK_DIV(4)},
+
+ {EMAC_SGMII_LN_PARALLEL_RATE, PARALLEL_RATE_MODE0(1)},
+ {EMAC_SGMII_LN_TX_BAND_MODE, BAND_MODE0(2)},
+ {EMAC_SGMII_LN_RX_BAND, BAND_MODE0(3)},
+ {EMAC_SGMII_LN_LANE_MODE, LANE_MODE(26)},
+ {EMAC_SGMII_LN_RX_RCVR_PATH1_MODE0, CDR_PD_SEL_MODE0(3)},
+ {EMAC_SGMII_LN_RSM_CONFIG, BYPASS_RSM_SAMP_CAL | BYPASS_RSM_DLL_CAL},
+};
+
+static const struct emac_reg_write physical_coding_sublayer_programming[] = {
+ {EMAC_SGMII_PHY_POW_DWN_CTRL0, PWRDN_B},
+ {EMAC_SGMII_PHY_CDR_CTRL0, CDR_MAX_CNT(15)},
+ {EMAC_SGMII_PHY_TX_PWR_CTRL, 0},
+ {EMAC_SGMII_PHY_LANE_CTRL1, L0_RX_EQUALIZE_ENABLE},
+};
+
+int emac_sgmii_init_qdf2432(struct emac_adapter *adpt)
+{
+ struct emac_phy *phy = &adpt->phy;
+ void __iomem *phy_regs = phy->base;
+ void __iomem *laned = phy->digital;
+ unsigned int i;
+ u32 lnstatus;
+
+ /* PCS lane-x init */
+ emac_reg_write_all(phy->base, physical_coding_sublayer_programming,
+ ARRAY_SIZE(physical_coding_sublayer_programming));
+
+ /* SGMII lane-x init */
+ emac_reg_write_all(phy->digital, sgmii_laned, ARRAY_SIZE(sgmii_laned));
+
+ /* Power up PCS and start reset lane state machine */
+
+ writel(0, phy_regs + EMAC_SGMII_PHY_RESET_CTRL);
+ writel(1, laned + SGMII_LN_RSM_START);
+
+ /* Wait for c_ready assertion */
+ for (i = 0; i < SERDES_START_WAIT_TIMES; i++) {
+ lnstatus = readl(phy_regs + SGMII_PHY_LN_LANE_STATUS);
+ if (lnstatus & BIT(1))
+ break;
+ usleep_range(100, 200);
+ }
+
+ if (i == SERDES_START_WAIT_TIMES) {
+ netdev_err(adpt->netdev, "SGMII failed to start\n");
+ return -EIO;
+ }
+
+ /* Disable digital and SERDES loopback */
+ writel(0, phy_regs + SGMII_PHY_LN_BIST_GEN0);
+ writel(0, phy_regs + SGMII_PHY_LN_BIST_GEN2);
+ writel(0, phy_regs + SGMII_PHY_LN_CDR_CTRL1);
+
+ /* Mask out all the SGMII Interrupt */
+ writel(0, phy_regs + EMAC_SGMII_PHY_INTERRUPT_MASK);
+
+ return 0;
+}
diff --git a/drivers/net/ethernet/qualcomm/emac/emac-sgmii.c b/drivers/net/ethernet/qualcomm/emac/emac-sgmii.c
index 75c1b530e39e..bf722a9bb09d 100644
--- a/drivers/net/ethernet/qualcomm/emac/emac-sgmii.c
+++ b/drivers/net/ethernet/qualcomm/emac/emac-sgmii.c
@@ -20,448 +20,33 @@
#include "emac-mac.h"
#include "emac-sgmii.h"
-/* EMAC_QSERDES register offsets */
-#define EMAC_QSERDES_COM_SYS_CLK_CTRL 0x000000
-#define EMAC_QSERDES_COM_PLL_CNTRL 0x000014
-#define EMAC_QSERDES_COM_PLL_IP_SETI 0x000018
-#define EMAC_QSERDES_COM_PLL_CP_SETI 0x000024
-#define EMAC_QSERDES_COM_PLL_IP_SETP 0x000028
-#define EMAC_QSERDES_COM_PLL_CP_SETP 0x00002c
-#define EMAC_QSERDES_COM_SYSCLK_EN_SEL 0x000038
-#define EMAC_QSERDES_COM_RESETSM_CNTRL 0x000040
-#define EMAC_QSERDES_COM_PLLLOCK_CMP1 0x000044
-#define EMAC_QSERDES_COM_PLLLOCK_CMP2 0x000048
-#define EMAC_QSERDES_COM_PLLLOCK_CMP3 0x00004c
-#define EMAC_QSERDES_COM_PLLLOCK_CMP_EN 0x000050
-#define EMAC_QSERDES_COM_DEC_START1 0x000064
-#define EMAC_QSERDES_COM_DIV_FRAC_START1 0x000098
-#define EMAC_QSERDES_COM_DIV_FRAC_START2 0x00009c
-#define EMAC_QSERDES_COM_DIV_FRAC_START3 0x0000a0
-#define EMAC_QSERDES_COM_DEC_START2 0x0000a4
-#define EMAC_QSERDES_COM_PLL_CRCTRL 0x0000ac
-#define EMAC_QSERDES_COM_RESET_SM 0x0000bc
-#define EMAC_QSERDES_TX_BIST_MODE_LANENO 0x000100
-#define EMAC_QSERDES_TX_TX_EMP_POST1_LVL 0x000108
-#define EMAC_QSERDES_TX_TX_DRV_LVL 0x00010c
-#define EMAC_QSERDES_TX_LANE_MODE 0x000150
-#define EMAC_QSERDES_TX_TRAN_DRVR_EMP_EN 0x000170
-#define EMAC_QSERDES_RX_CDR_CONTROL 0x000200
-#define EMAC_QSERDES_RX_CDR_CONTROL2 0x000210
-#define EMAC_QSERDES_RX_RX_EQ_GAIN12 0x000230
-
/* EMAC_SGMII register offsets */
-#define EMAC_SGMII_PHY_SERDES_START 0x000000
-#define EMAC_SGMII_PHY_CMN_PWR_CTRL 0x000004
-#define EMAC_SGMII_PHY_RX_PWR_CTRL 0x000008
-#define EMAC_SGMII_PHY_TX_PWR_CTRL 0x00000C
-#define EMAC_SGMII_PHY_LANE_CTRL1 0x000018
-#define EMAC_SGMII_PHY_AUTONEG_CFG2 0x000048
-#define EMAC_SGMII_PHY_CDR_CTRL0 0x000058
-#define EMAC_SGMII_PHY_SPEED_CFG1 0x000074
-#define EMAC_SGMII_PHY_POW_DWN_CTRL0 0x000080
-#define EMAC_SGMII_PHY_RESET_CTRL 0x0000a8
-#define EMAC_SGMII_PHY_IRQ_CMD 0x0000ac
-#define EMAC_SGMII_PHY_INTERRUPT_CLEAR 0x0000b0
-#define EMAC_SGMII_PHY_INTERRUPT_MASK 0x0000b4
-#define EMAC_SGMII_PHY_INTERRUPT_STATUS 0x0000b8
-#define EMAC_SGMII_PHY_RX_CHK_STATUS 0x0000d4
-#define EMAC_SGMII_PHY_AUTONEG0_STATUS 0x0000e0
-#define EMAC_SGMII_PHY_AUTONEG1_STATUS 0x0000e4
-
-/* EMAC_QSERDES_COM_PLL_IP_SETI */
-#define PLL_IPSETI(x) ((x) & 0x3f)
-
-/* EMAC_QSERDES_COM_PLL_CP_SETI */
-#define PLL_CPSETI(x) ((x) & 0xff)
-
-/* EMAC_QSERDES_COM_PLL_IP_SETP */
-#define PLL_IPSETP(x) ((x) & 0x3f)
-
-/* EMAC_QSERDES_COM_PLL_CP_SETP */
-#define PLL_CPSETP(x) ((x) & 0x1f)
-
-/* EMAC_QSERDES_COM_PLL_CRCTRL */
-#define PLL_RCTRL(x) (((x) & 0xf) << 4)
-#define PLL_CCTRL(x) ((x) & 0xf)
-
-/* SGMII v2 PHY registers per lane */
-#define EMAC_SGMII_PHY_LN_OFFSET 0x0400
-
-/* SGMII v2 digital lane registers */
-#define EMAC_SGMII_LN_DRVR_CTRL0 0x00C
-#define EMAC_SGMII_LN_DRVR_TAP_EN 0x018
-#define EMAC_SGMII_LN_TX_MARGINING 0x01C
-#define EMAC_SGMII_LN_TX_PRE 0x020
-#define EMAC_SGMII_LN_TX_POST 0x024
-#define EMAC_SGMII_LN_TX_BAND_MODE 0x060
-#define EMAC_SGMII_LN_LANE_MODE 0x064
-#define EMAC_SGMII_LN_PARALLEL_RATE 0x078
-#define EMAC_SGMII_LN_CML_CTRL_MODE0 0x0B8
-#define EMAC_SGMII_LN_MIXER_CTRL_MODE0 0x0D0
-#define EMAC_SGMII_LN_VGA_INITVAL 0x134
-#define EMAC_SGMII_LN_UCDR_FO_GAIN_MODE0 0x17C
-#define EMAC_SGMII_LN_UCDR_SO_GAIN_MODE0 0x188
-#define EMAC_SGMII_LN_UCDR_SO_CONFIG 0x194
-#define EMAC_SGMII_LN_RX_BAND 0x19C
-#define EMAC_SGMII_LN_RX_RCVR_PATH1_MODE0 0x1B8
-#define EMAC_SGMII_LN_RSM_CONFIG 0x1F0
-#define EMAC_SGMII_LN_SIGDET_ENABLES 0x224
-#define EMAC_SGMII_LN_SIGDET_CNTRL 0x228
-#define EMAC_SGMII_LN_SIGDET_DEGLITCH_CNTRL 0x22C
-#define EMAC_SGMII_LN_RX_EN_SIGNAL 0x2A0
-#define EMAC_SGMII_LN_RX_MISC_CNTRL0 0x2AC
-#define EMAC_SGMII_LN_DRVR_LOGIC_CLKDIV 0x2BC
-
-/* SGMII v2 digital lane register values */
-#define UCDR_STEP_BY_TWO_MODE0 BIT(7)
-#define UCDR_xO_GAIN_MODE(x) ((x) & 0x7f)
-#define UCDR_ENABLE BIT(6)
-#define UCDR_SO_SATURATION(x) ((x) & 0x3f)
-#define SIGDET_LP_BYP_PS4 BIT(7)
-#define SIGDET_EN_PS0_TO_PS2 BIT(6)
-#define EN_ACCOUPLEVCM_SW_MUX BIT(5)
-#define EN_ACCOUPLEVCM_SW BIT(4)
-#define RX_SYNC_EN BIT(3)
-#define RXTERM_HIGHZ_PS5 BIT(2)
-#define SIGDET_EN_PS3 BIT(1)
-#define EN_ACCOUPLE_VCM_PS3 BIT(0)
-#define UFS_MODE BIT(5)
-#define TXVAL_VALID_INIT BIT(4)
-#define TXVAL_VALID_MUX BIT(3)
-#define TXVAL_VALID BIT(2)
-#define USB3P1_MODE BIT(1)
-#define KR_PCIGEN3_MODE BIT(0)
-#define PRE_EN BIT(3)
-#define POST_EN BIT(2)
-#define MAIN_EN_MUX BIT(1)
-#define MAIN_EN BIT(0)
-#define TX_MARGINING_MUX BIT(6)
-#define TX_MARGINING(x) ((x) & 0x3f)
-#define TX_PRE_MUX BIT(6)
-#define TX_PRE(x) ((x) & 0x3f)
-#define TX_POST_MUX BIT(6)
-#define TX_POST(x) ((x) & 0x3f)
-#define CML_GEAR_MODE(x) (((x) & 7) << 3)
-#define CML2CMOS_IBOOST_MODE(x) ((x) & 7)
-#define MIXER_LOADB_MODE(x) (((x) & 0xf) << 2)
-#define MIXER_DATARATE_MODE(x) ((x) & 3)
-#define VGA_THRESH_DFE(x) ((x) & 0x3f)
-#define SIGDET_LP_BYP_PS0_TO_PS2 BIT(5)
-#define SIGDET_LP_BYP_MUX BIT(4)
-#define SIGDET_LP_BYP BIT(3)
-#define SIGDET_EN_MUX BIT(2)
-#define SIGDET_EN BIT(1)
-#define SIGDET_FLT_BYP BIT(0)
-#define SIGDET_LVL(x) (((x) & 0xf) << 4)
-#define SIGDET_BW_CTRL(x) ((x) & 0xf)
-#define SIGDET_DEGLITCH_CTRL(x) (((x) & 0xf) << 1)
-#define SIGDET_DEGLITCH_BYP BIT(0)
-#define INVERT_PCS_RX_CLK BIT(7)
-#define PWM_EN BIT(6)
-#define RXBIAS_SEL(x) (((x) & 0x3) << 4)
-#define EBDAC_SIGN BIT(3)
-#define EDAC_SIGN BIT(2)
-#define EN_AUXTAP1SIGN_INVERT BIT(1)
-#define EN_DAC_CHOPPING BIT(0)
-#define DRVR_LOGIC_CLK_EN BIT(4)
-#define DRVR_LOGIC_CLK_DIV(x) ((x) & 0xf)
-#define PARALLEL_RATE_MODE2(x) (((x) & 0x3) << 4)
-#define PARALLEL_RATE_MODE1(x) (((x) & 0x3) << 2)
-#define PARALLEL_RATE_MODE0(x) ((x) & 0x3)
-#define BAND_MODE2(x) (((x) & 0x3) << 4)
-#define BAND_MODE1(x) (((x) & 0x3) << 2)
-#define BAND_MODE0(x) ((x) & 0x3)
-#define LANE_SYNC_MODE BIT(5)
-#define LANE_MODE(x) ((x) & 0x1f)
-#define CDR_PD_SEL_MODE0(x) (((x) & 0x3) << 5)
-#define EN_DLL_MODE0 BIT(4)
-#define EN_IQ_DCC_MODE0 BIT(3)
-#define EN_IQCAL_MODE0 BIT(2)
-#define EN_QPATH_MODE0 BIT(1)
-#define EN_EPATH_MODE0 BIT(0)
-#define FORCE_TSYNC_ACK BIT(7)
-#define FORCE_CMN_ACK BIT(6)
-#define FORCE_CMN_READY BIT(5)
-#define EN_RCLK_DEGLITCH BIT(4)
-#define BYPASS_RSM_CDR_RESET BIT(3)
-#define BYPASS_RSM_TSYNC BIT(2)
-#define BYPASS_RSM_SAMP_CAL BIT(1)
-#define BYPASS_RSM_DLL_CAL BIT(0)
-
-/* EMAC_QSERDES_COM_SYS_CLK_CTRL */
-#define SYSCLK_CM BIT(4)
-#define SYSCLK_AC_COUPLE BIT(3)
-
-/* EMAC_QSERDES_COM_PLL_CNTRL */
-#define OCP_EN BIT(5)
-#define PLL_DIV_FFEN BIT(2)
-#define PLL_DIV_ORD BIT(1)
-
-/* EMAC_QSERDES_COM_SYSCLK_EN_SEL */
-#define SYSCLK_SEL_CMOS BIT(3)
-
-/* EMAC_QSERDES_COM_RESETSM_CNTRL */
-#define FRQ_TUNE_MODE BIT(4)
-
-/* EMAC_QSERDES_COM_PLLLOCK_CMP_EN */
-#define PLLLOCK_CMP_EN BIT(0)
-
-/* EMAC_QSERDES_COM_DEC_START1 */
-#define DEC_START1_MUX BIT(7)
-#define DEC_START1(x) ((x) & 0x7f)
-
-/* EMAC_QSERDES_COM_DIV_FRAC_START1 * EMAC_QSERDES_COM_DIV_FRAC_START2 */
-#define DIV_FRAC_START_MUX BIT(7)
-#define DIV_FRAC_START(x) ((x) & 0x7f)
-
-/* EMAC_QSERDES_COM_DIV_FRAC_START3 */
-#define DIV_FRAC_START3_MUX BIT(4)
-#define DIV_FRAC_START3(x) ((x) & 0xf)
-
-/* EMAC_QSERDES_COM_DEC_START2 */
-#define DEC_START2_MUX BIT(1)
-#define DEC_START2 BIT(0)
-
-/* EMAC_QSERDES_COM_RESET_SM */
-#define READY BIT(5)
-
-/* EMAC_QSERDES_TX_TX_EMP_POST1_LVL */
-#define TX_EMP_POST1_LVL_MUX BIT(5)
-#define TX_EMP_POST1_LVL(x) ((x) & 0x1f)
-#define TX_EMP_POST1_LVL_BMSK 0x1f
-#define TX_EMP_POST1_LVL_SHFT 0
-
-/* EMAC_QSERDES_TX_TX_DRV_LVL */
-#define TX_DRV_LVL_MUX BIT(4)
-#define TX_DRV_LVL(x) ((x) & 0xf)
-
-/* EMAC_QSERDES_TX_TRAN_DRVR_EMP_EN */
-#define EMP_EN_MUX BIT(1)
-#define EMP_EN BIT(0)
-
-/* EMAC_QSERDES_RX_CDR_CONTROL & EMAC_QSERDES_RX_CDR_CONTROL2 */
-#define HBW_PD_EN BIT(7)
-#define SECONDORDERENABLE BIT(6)
-#define FIRSTORDER_THRESH(x) (((x) & 0x7) << 3)
-#define SECONDORDERGAIN(x) ((x) & 0x7)
-
-/* EMAC_QSERDES_RX_RX_EQ_GAIN12 */
-#define RX_EQ_GAIN2(x) (((x) & 0xf) << 4)
-#define RX_EQ_GAIN1(x) ((x) & 0xf)
-
-/* EMAC_SGMII_PHY_SERDES_START */
-#define SERDES_START BIT(0)
-
-/* EMAC_SGMII_PHY_CMN_PWR_CTRL */
-#define BIAS_EN BIT(6)
-#define PLL_EN BIT(5)
-#define SYSCLK_EN BIT(4)
-#define CLKBUF_L_EN BIT(3)
-#define PLL_TXCLK_EN BIT(1)
-#define PLL_RXCLK_EN BIT(0)
-
-/* EMAC_SGMII_PHY_RX_PWR_CTRL */
-#define L0_RX_SIGDET_EN BIT(7)
-#define L0_RX_TERM_MODE(x) (((x) & 3) << 4)
-#define L0_RX_I_EN BIT(1)
-
-/* EMAC_SGMII_PHY_TX_PWR_CTRL */
-#define L0_TX_EN BIT(5)
-#define L0_CLKBUF_EN BIT(4)
-#define L0_TRAN_BIAS_EN BIT(1)
-
-/* EMAC_SGMII_PHY_LANE_CTRL1 */
-#define L0_RX_EQUALIZE_ENABLE BIT(6)
-#define L0_RESET_TSYNC_EN BIT(4)
-#define L0_DRV_LVL(x) ((x) & 0xf)
-
-/* EMAC_SGMII_PHY_AUTONEG_CFG2 */
+#define EMAC_SGMII_PHY_AUTONEG_CFG2 0x0048
+#define EMAC_SGMII_PHY_SPEED_CFG1 0x0074
+#define EMAC_SGMII_PHY_IRQ_CMD 0x00ac
+#define EMAC_SGMII_PHY_INTERRUPT_CLEAR 0x00b0
+#define EMAC_SGMII_PHY_INTERRUPT_STATUS 0x00b8
+
#define FORCE_AN_TX_CFG BIT(5)
#define FORCE_AN_RX_CFG BIT(4)
#define AN_ENABLE BIT(0)
-/* EMAC_SGMII_PHY_SPEED_CFG1 */
#define DUPLEX_MODE BIT(4)
#define SPDMODE_1000 BIT(1)
#define SPDMODE_100 BIT(0)
#define SPDMODE_10 0
-#define SPDMODE_BMSK 3
-#define SPDMODE_SHFT 0
-
-/* EMAC_SGMII_PHY_POW_DWN_CTRL0 */
-#define PWRDN_B BIT(0)
-#define CDR_MAX_CNT(x) ((x) & 0xff)
-
-/* EMAC_QSERDES_TX_BIST_MODE_LANENO */
-#define BIST_LANE_NUMBER(x) (((x) & 3) << 5)
-#define BISTMODE(x) ((x) & 0x1f)
-
-/* EMAC_QSERDES_COM_PLLLOCK_CMPx */
-#define PLLLOCK_CMP(x) ((x) & 0xff)
-/* EMAC_SGMII_PHY_RESET_CTRL */
-#define PHY_SW_RESET BIT(0)
-
-/* EMAC_SGMII_PHY_IRQ_CMD */
#define IRQ_GLOBAL_CLEAR BIT(0)
-/* EMAC_SGMII_PHY_INTERRUPT_MASK */
#define DECODE_CODE_ERR BIT(7)
#define DECODE_DISP_ERR BIT(6)
-#define PLL_UNLOCK BIT(5)
-#define AN_ILLEGAL_TERM BIT(4)
-#define SYNC_FAIL BIT(3)
-#define AN_START BIT(2)
-#define AN_END BIT(1)
-#define AN_REQUEST BIT(0)
#define SGMII_PHY_IRQ_CLR_WAIT_TIME 10
-#define SGMII_PHY_INTERRUPT_ERR (\
- DECODE_CODE_ERR |\
- DECODE_DISP_ERR)
-
-#define SGMII_ISR_AN_MASK (\
- AN_REQUEST |\
- AN_START |\
- AN_END |\
- AN_ILLEGAL_TERM |\
- PLL_UNLOCK |\
- SYNC_FAIL)
-
-#define SGMII_ISR_MASK (\
- SGMII_PHY_INTERRUPT_ERR |\
- SGMII_ISR_AN_MASK)
-
-/* SGMII TX_CONFIG */
-#define TXCFG_LINK 0x8000
-#define TXCFG_MODE_BMSK 0x1c00
-#define TXCFG_1000_FULL 0x1800
-#define TXCFG_100_FULL 0x1400
-#define TXCFG_100_HALF 0x0400
-#define TXCFG_10_FULL 0x1000
-#define TXCFG_10_HALF 0x0000
+#define SGMII_PHY_INTERRUPT_ERR (DECODE_CODE_ERR | DECODE_DISP_ERR)
#define SERDES_START_WAIT_TIMES 100
-struct emac_reg_write {
- unsigned int offset;
- u32 val;
-};
-
-static void emac_reg_write_all(void __iomem *base,
- const struct emac_reg_write *itr, size_t size)
-{
- size_t i;
-
- for (i = 0; i < size; ++itr, ++i)
- writel(itr->val, base + itr->offset);
-}
-
-static const struct emac_reg_write physical_coding_sublayer_programming_v1[] = {
- {EMAC_SGMII_PHY_CDR_CTRL0, CDR_MAX_CNT(15)},
- {EMAC_SGMII_PHY_POW_DWN_CTRL0, PWRDN_B},
- {EMAC_SGMII_PHY_CMN_PWR_CTRL,
- BIAS_EN | SYSCLK_EN | CLKBUF_L_EN | PLL_TXCLK_EN | PLL_RXCLK_EN},
- {EMAC_SGMII_PHY_TX_PWR_CTRL, L0_TX_EN | L0_CLKBUF_EN | L0_TRAN_BIAS_EN},
- {EMAC_SGMII_PHY_RX_PWR_CTRL,
- L0_RX_SIGDET_EN | L0_RX_TERM_MODE(1) | L0_RX_I_EN},
- {EMAC_SGMII_PHY_CMN_PWR_CTRL,
- BIAS_EN | PLL_EN | SYSCLK_EN | CLKBUF_L_EN | PLL_TXCLK_EN |
- PLL_RXCLK_EN},
- {EMAC_SGMII_PHY_LANE_CTRL1,
- L0_RX_EQUALIZE_ENABLE | L0_RESET_TSYNC_EN | L0_DRV_LVL(15)},
-};
-
-static const struct emac_reg_write sysclk_refclk_setting[] = {
- {EMAC_QSERDES_COM_SYSCLK_EN_SEL, SYSCLK_SEL_CMOS},
- {EMAC_QSERDES_COM_SYS_CLK_CTRL, SYSCLK_CM | SYSCLK_AC_COUPLE},
-};
-
-static const struct emac_reg_write pll_setting[] = {
- {EMAC_QSERDES_COM_PLL_IP_SETI, PLL_IPSETI(1)},
- {EMAC_QSERDES_COM_PLL_CP_SETI, PLL_CPSETI(59)},
- {EMAC_QSERDES_COM_PLL_IP_SETP, PLL_IPSETP(10)},
- {EMAC_QSERDES_COM_PLL_CP_SETP, PLL_CPSETP(9)},
- {EMAC_QSERDES_COM_PLL_CRCTRL, PLL_RCTRL(15) | PLL_CCTRL(11)},
- {EMAC_QSERDES_COM_PLL_CNTRL, OCP_EN | PLL_DIV_FFEN | PLL_DIV_ORD},
- {EMAC_QSERDES_COM_DEC_START1, DEC_START1_MUX | DEC_START1(2)},
- {EMAC_QSERDES_COM_DEC_START2, DEC_START2_MUX | DEC_START2},
- {EMAC_QSERDES_COM_DIV_FRAC_START1,
- DIV_FRAC_START_MUX | DIV_FRAC_START(85)},
- {EMAC_QSERDES_COM_DIV_FRAC_START2,
- DIV_FRAC_START_MUX | DIV_FRAC_START(42)},
- {EMAC_QSERDES_COM_DIV_FRAC_START3,
- DIV_FRAC_START3_MUX | DIV_FRAC_START3(3)},
- {EMAC_QSERDES_COM_PLLLOCK_CMP1, PLLLOCK_CMP(43)},
- {EMAC_QSERDES_COM_PLLLOCK_CMP2, PLLLOCK_CMP(104)},
- {EMAC_QSERDES_COM_PLLLOCK_CMP3, PLLLOCK_CMP(0)},
- {EMAC_QSERDES_COM_PLLLOCK_CMP_EN, PLLLOCK_CMP_EN},
- {EMAC_QSERDES_COM_RESETSM_CNTRL, FRQ_TUNE_MODE},
-};
-
-static const struct emac_reg_write cdr_setting[] = {
- {EMAC_QSERDES_RX_CDR_CONTROL,
- SECONDORDERENABLE | FIRSTORDER_THRESH(3) | SECONDORDERGAIN(2)},
- {EMAC_QSERDES_RX_CDR_CONTROL2,
- SECONDORDERENABLE | FIRSTORDER_THRESH(3) | SECONDORDERGAIN(4)},
-};
-
-static const struct emac_reg_write tx_rx_setting[] = {
- {EMAC_QSERDES_TX_BIST_MODE_LANENO, 0},
- {EMAC_QSERDES_TX_TX_DRV_LVL, TX_DRV_LVL_MUX | TX_DRV_LVL(15)},
- {EMAC_QSERDES_TX_TRAN_DRVR_EMP_EN, EMP_EN_MUX | EMP_EN},
- {EMAC_QSERDES_TX_TX_EMP_POST1_LVL,
- TX_EMP_POST1_LVL_MUX | TX_EMP_POST1_LVL(1)},
- {EMAC_QSERDES_RX_RX_EQ_GAIN12, RX_EQ_GAIN2(15) | RX_EQ_GAIN1(15)},
- {EMAC_QSERDES_TX_LANE_MODE, LANE_MODE(8)},
-};
-
-static const struct emac_reg_write sgmii_v2_laned[] = {
- /* CDR Settings */
- {EMAC_SGMII_LN_UCDR_FO_GAIN_MODE0,
- UCDR_STEP_BY_TWO_MODE0 | UCDR_xO_GAIN_MODE(10)},
- {EMAC_SGMII_LN_UCDR_SO_GAIN_MODE0, UCDR_xO_GAIN_MODE(6)},
- {EMAC_SGMII_LN_UCDR_SO_CONFIG, UCDR_ENABLE | UCDR_SO_SATURATION(12)},
-
- /* TX/RX Settings */
- {EMAC_SGMII_LN_RX_EN_SIGNAL, SIGDET_LP_BYP_PS4 | SIGDET_EN_PS0_TO_PS2},
-
- {EMAC_SGMII_LN_DRVR_CTRL0, TXVAL_VALID_INIT | KR_PCIGEN3_MODE},
- {EMAC_SGMII_LN_DRVR_TAP_EN, MAIN_EN},
- {EMAC_SGMII_LN_TX_MARGINING, TX_MARGINING_MUX | TX_MARGINING(25)},
- {EMAC_SGMII_LN_TX_PRE, TX_PRE_MUX},
- {EMAC_SGMII_LN_TX_POST, TX_POST_MUX},
-
- {EMAC_SGMII_LN_CML_CTRL_MODE0,
- CML_GEAR_MODE(1) | CML2CMOS_IBOOST_MODE(1)},
- {EMAC_SGMII_LN_MIXER_CTRL_MODE0,
- MIXER_LOADB_MODE(12) | MIXER_DATARATE_MODE(1)},
- {EMAC_SGMII_LN_VGA_INITVAL, VGA_THRESH_DFE(31)},
- {EMAC_SGMII_LN_SIGDET_ENABLES,
- SIGDET_LP_BYP_PS0_TO_PS2 | SIGDET_FLT_BYP},
- {EMAC_SGMII_LN_SIGDET_CNTRL, SIGDET_LVL(8)},
-
- {EMAC_SGMII_LN_SIGDET_DEGLITCH_CNTRL, SIGDET_DEGLITCH_CTRL(4)},
- {EMAC_SGMII_LN_RX_MISC_CNTRL0, 0},
- {EMAC_SGMII_LN_DRVR_LOGIC_CLKDIV,
- DRVR_LOGIC_CLK_EN | DRVR_LOGIC_CLK_DIV(4)},
-
- {EMAC_SGMII_LN_PARALLEL_RATE, PARALLEL_RATE_MODE0(1)},
- {EMAC_SGMII_LN_TX_BAND_MODE, BAND_MODE0(2)},
- {EMAC_SGMII_LN_RX_BAND, BAND_MODE0(3)},
- {EMAC_SGMII_LN_LANE_MODE, LANE_MODE(26)},
- {EMAC_SGMII_LN_RX_RCVR_PATH1_MODE0, CDR_PD_SEL_MODE0(3)},
- {EMAC_SGMII_LN_RSM_CONFIG, BYPASS_RSM_SAMP_CAL | BYPASS_RSM_DLL_CAL},
-};
-
-static const struct emac_reg_write physical_coding_sublayer_programming_v2[] = {
- {EMAC_SGMII_PHY_POW_DWN_CTRL0, PWRDN_B},
- {EMAC_SGMII_PHY_CDR_CTRL0, CDR_MAX_CNT(15)},
- {EMAC_SGMII_PHY_TX_PWR_CTRL, 0},
- {EMAC_SGMII_PHY_LANE_CTRL1, L0_RX_EQUALIZE_ENABLE},
-};
-
static int emac_sgmii_link_init(struct emac_adapter *adpt)
{
struct phy_device *phydev = adpt->phydev;
@@ -536,98 +121,6 @@ static int emac_sgmii_irq_clear(struct emac_adapter *adpt, u32 irq_bits)
return 0;
}
-int emac_sgmii_init_v1(struct emac_adapter *adpt)
-{
- struct emac_phy *phy = &adpt->phy;
- unsigned int i;
- int ret;
-
- ret = emac_sgmii_link_init(adpt);
- if (ret)
- return ret;
-
- emac_reg_write_all(phy->base, physical_coding_sublayer_programming_v1,
- ARRAY_SIZE(physical_coding_sublayer_programming_v1));
- emac_reg_write_all(phy->base, sysclk_refclk_setting,
- ARRAY_SIZE(sysclk_refclk_setting));
- emac_reg_write_all(phy->base, pll_setting, ARRAY_SIZE(pll_setting));
- emac_reg_write_all(phy->base, cdr_setting, ARRAY_SIZE(cdr_setting));
- emac_reg_write_all(phy->base, tx_rx_setting,
- ARRAY_SIZE(tx_rx_setting));
-
- /* Power up the Ser/Des engine */
- writel(SERDES_START, phy->base + EMAC_SGMII_PHY_SERDES_START);
-
- for (i = 0; i < SERDES_START_WAIT_TIMES; i++) {
- if (readl(phy->base + EMAC_QSERDES_COM_RESET_SM) & READY)
- break;
- usleep_range(100, 200);
- }
-
- if (i == SERDES_START_WAIT_TIMES) {
- netdev_err(adpt->netdev, "error: ser/des failed to start\n");
- return -EIO;
- }
- /* Mask out all the SGMII Interrupt */
- writel(0, phy->base + EMAC_SGMII_PHY_INTERRUPT_MASK);
-
- emac_sgmii_irq_clear(adpt, SGMII_PHY_INTERRUPT_ERR);
-
- return 0;
-}
-
-int emac_sgmii_init_v2(struct emac_adapter *adpt)
-{
- struct emac_phy *phy = &adpt->phy;
- void __iomem *phy_regs = phy->base;
- void __iomem *laned = phy->digital;
- unsigned int i;
- u32 lnstatus;
- int ret;
-
- ret = emac_sgmii_link_init(adpt);
- if (ret)
- return ret;
-
- /* PCS lane-x init */
- emac_reg_write_all(phy->base, physical_coding_sublayer_programming_v2,
- ARRAY_SIZE(physical_coding_sublayer_programming_v2));
-
- /* SGMII lane-x init */
- emac_reg_write_all(phy->digital,
- sgmii_v2_laned, ARRAY_SIZE(sgmii_v2_laned));
-
- /* Power up PCS and start reset lane state machine */
-
- writel(0, phy_regs + EMAC_SGMII_PHY_RESET_CTRL);
- writel(1, laned + SGMII_LN_RSM_START);
-
- /* Wait for c_ready assertion */
- for (i = 0; i < SERDES_START_WAIT_TIMES; i++) {
- lnstatus = readl(phy_regs + SGMII_PHY_LN_LANE_STATUS);
- if (lnstatus & BIT(1))
- break;
- usleep_range(100, 200);
- }
-
- if (i == SERDES_START_WAIT_TIMES) {
- netdev_err(adpt->netdev, "SGMII failed to start\n");
- return -EIO;
- }
-
- /* Disable digital and SERDES loopback */
- writel(0, phy_regs + SGMII_PHY_LN_BIST_GEN0);
- writel(0, phy_regs + SGMII_PHY_LN_BIST_GEN2);
- writel(0, phy_regs + SGMII_PHY_LN_CDR_CTRL1);
-
- /* Mask out all the SGMII Interrupt */
- writel(0, phy_regs + EMAC_SGMII_PHY_INTERRUPT_MASK);
-
- emac_sgmii_irq_clear(adpt, SGMII_PHY_INTERRUPT_ERR);
-
- return 0;
-}
-
static void emac_sgmii_reset_prepare(struct emac_adapter *adpt)
{
struct emac_phy *phy = &adpt->phy;
@@ -651,44 +144,72 @@ void emac_sgmii_reset(struct emac_adapter *adpt)
{
int ret;
- clk_set_rate(adpt->clk[EMAC_CLK_HIGH_SPEED], 19200000);
emac_sgmii_reset_prepare(adpt);
+ ret = emac_sgmii_link_init(adpt);
+ if (ret) {
+ netdev_err(adpt->netdev, "unsupported link speed\n");
+ return;
+ }
+
ret = adpt->phy.initialize(adpt);
if (ret)
netdev_err(adpt->netdev,
"could not reinitialize internal PHY (error=%i)\n",
ret);
-
- clk_set_rate(adpt->clk[EMAC_CLK_HIGH_SPEED], 125000000);
}
static int emac_sgmii_acpi_match(struct device *dev, void *data)
{
+#ifdef CONFIG_ACPI
static const struct acpi_device_id match_table[] = {
{
.id = "QCOM8071",
- .driver_data = (kernel_ulong_t)emac_sgmii_init_v2,
},
{}
};
const struct acpi_device_id *id = acpi_match_device(match_table, dev);
emac_sgmii_initialize *initialize = data;
- if (id)
- *initialize = (emac_sgmii_initialize)id->driver_data;
+ if (id) {
+ acpi_handle handle = ACPI_HANDLE(dev);
+ unsigned long long hrv;
+ acpi_status status;
+
+ status = acpi_evaluate_integer(handle, "_HRV", NULL, &hrv);
+ if (status) {
+ if (status == AE_NOT_FOUND)
+ /* Older versions of the QDF2432 ACPI tables do
+ * not have an _HRV property.
+ */
+ hrv = 1;
+ else
+ /* Something is wrong with the tables */
+ return 0;
+ }
- return !!id;
+ switch (hrv) {
+ case 1:
+ *initialize = emac_sgmii_init_qdf2432;
+ return 1;
+ case 2:
+ *initialize = emac_sgmii_init_qdf2400;
+ return 1;
+ }
+ }
+#endif
+
+ return 0;
}
static const struct of_device_id emac_sgmii_dt_match[] = {
{
.compatible = "qcom,fsm9900-emac-sgmii",
- .data = emac_sgmii_init_v1,
+ .data = emac_sgmii_init_fsm9900,
},
{
.compatible = "qcom,qdf2432-emac-sgmii",
- .data = emac_sgmii_init_v2,
+ .data = emac_sgmii_init_qdf2432,
},
{}
};
@@ -765,6 +286,8 @@ int emac_sgmii_config(struct platform_device *pdev, struct emac_adapter *adpt)
if (ret)
goto error;
+ emac_sgmii_irq_clear(adpt, SGMII_PHY_INTERRUPT_ERR);
+
/* We've remapped the addresses, so we don't need the device any
* more. of_find_device_by_node() says we should release it.
*/
diff --git a/drivers/net/ethernet/qualcomm/emac/emac-sgmii.h b/drivers/net/ethernet/qualcomm/emac/emac-sgmii.h
index ce79212ff403..80ed3dc3157a 100644
--- a/drivers/net/ethernet/qualcomm/emac/emac-sgmii.h
+++ b/drivers/net/ethernet/qualcomm/emac/emac-sgmii.h
@@ -16,9 +16,11 @@
struct emac_adapter;
struct platform_device;
-int emac_sgmii_init_v1(struct emac_adapter *adpt);
-int emac_sgmii_init_v2(struct emac_adapter *adpt);
int emac_sgmii_config(struct platform_device *pdev, struct emac_adapter *adpt);
void emac_sgmii_reset(struct emac_adapter *adpt);
+int emac_sgmii_init_fsm9900(struct emac_adapter *adpt);
+int emac_sgmii_init_qdf2432(struct emac_adapter *adpt);
+int emac_sgmii_init_qdf2400(struct emac_adapter *adpt);
+
#endif
diff --git a/drivers/net/ethernet/qualcomm/emac/emac.c b/drivers/net/ethernet/qualcomm/emac/emac.c
index 4fede4b86538..ae32f855e31b 100644
--- a/drivers/net/ethernet/qualcomm/emac/emac.c
+++ b/drivers/net/ethernet/qualcomm/emac/emac.c
@@ -239,15 +239,8 @@ static void emac_rx_mode_set(struct net_device *netdev)
/* Change the Maximum Transfer Unit (MTU) */
static int emac_change_mtu(struct net_device *netdev, int new_mtu)
{
- unsigned int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN;
struct emac_adapter *adpt = netdev_priv(netdev);
- if ((max_frame < EMAC_MIN_ETH_FRAME_SIZE) ||
- (max_frame > EMAC_MAX_ETH_FRAME_SIZE)) {
- netdev_err(adpt->netdev, "error: invalid MTU setting\n");
- return -EINVAL;
- }
-
netif_info(adpt, hw, adpt->netdev,
"changing MTU from %d to %d\n", netdev->mtu,
new_mtu);
@@ -680,6 +673,12 @@ static int emac_probe(struct platform_device *pdev)
netdev->vlan_features |= NETIF_F_SG | NETIF_F_HW_CSUM |
NETIF_F_TSO | NETIF_F_TSO6;
+ /* MTU range: 46 - 9194 */
+ netdev->min_mtu = EMAC_MIN_ETH_FRAME_SIZE -
+ (ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN);
+ netdev->max_mtu = EMAC_MAX_ETH_FRAME_SIZE -
+ (ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN);
+
INIT_WORK(&adpt->work_thread, emac_work_thread);
/* Initialize queues */
@@ -711,6 +710,8 @@ static int emac_probe(struct platform_device *pdev)
err_undo_napi:
netif_napi_del(&adpt->rx_q.napi);
err_undo_mdiobus:
+ if (!has_acpi_companion(&pdev->dev))
+ put_device(&adpt->phydev->mdio.dev);
mdiobus_unregister(adpt->mii_bus);
err_undo_clocks:
emac_clks_teardown(adpt);
@@ -730,6 +731,8 @@ static int emac_remove(struct platform_device *pdev)
emac_clks_teardown(adpt);
+ if (!has_acpi_companion(&pdev->dev))
+ put_device(&adpt->phydev->mdio.dev);
mdiobus_unregister(adpt->mii_bus);
free_netdev(netdev);
diff --git a/drivers/net/ethernet/qualcomm/qca_framing.h b/drivers/net/ethernet/qualcomm/qca_framing.h
index 5d965959c978..d5e795dcdf47 100644
--- a/drivers/net/ethernet/qualcomm/qca_framing.h
+++ b/drivers/net/ethernet/qualcomm/qca_framing.h
@@ -43,9 +43,9 @@
/* Frame length is invalid */
#define QCAFRM_INVFRAME (QCAFRM_ERR_BASE - 4)
-/* Min/Max Ethernet MTU */
-#define QCAFRM_ETHMINMTU 46
-#define QCAFRM_ETHMAXMTU 1500
+/* Min/Max Ethernet MTU: 46/1500 */
+#define QCAFRM_ETHMINMTU (ETH_ZLEN - ETH_HLEN)
+#define QCAFRM_ETHMAXMTU ETH_DATA_LEN
/* Min/Max frame lengths */
#define QCAFRM_ETHMINLEN (QCAFRM_ETHMINMTU + ETH_HLEN)
diff --git a/drivers/net/ethernet/qualcomm/qca_spi.c b/drivers/net/ethernet/qualcomm/qca_spi.c
index 6e2add979471..513e6c74e199 100644
--- a/drivers/net/ethernet/qualcomm/qca_spi.c
+++ b/drivers/net/ethernet/qualcomm/qca_spi.c
@@ -780,24 +780,12 @@ qcaspi_netdev_uninit(struct net_device *dev)
dev_kfree_skb(qca->rx_skb);
}
-static int
-qcaspi_netdev_change_mtu(struct net_device *dev, int new_mtu)
-{
- if ((new_mtu < QCAFRM_ETHMINMTU) || (new_mtu > QCAFRM_ETHMAXMTU))
- return -EINVAL;
-
- dev->mtu = new_mtu;
-
- return 0;
-}
-
static const struct net_device_ops qcaspi_netdev_ops = {
.ndo_init = qcaspi_netdev_init,
.ndo_uninit = qcaspi_netdev_uninit,
.ndo_open = qcaspi_netdev_open,
.ndo_stop = qcaspi_netdev_close,
.ndo_start_xmit = qcaspi_netdev_xmit,
- .ndo_change_mtu = qcaspi_netdev_change_mtu,
.ndo_set_mac_address = eth_mac_addr,
.ndo_tx_timeout = qcaspi_netdev_tx_timeout,
.ndo_validate_addr = eth_validate_addr,
@@ -814,6 +802,10 @@ qcaspi_netdev_setup(struct net_device *dev)
dev->priv_flags &= ~IFF_TX_SKB_SHARING;
dev->tx_queue_len = 100;
+ /* MTU range: 46 - 1500 */
+ dev->min_mtu = QCAFRM_ETHMINMTU;
+ dev->max_mtu = QCAFRM_ETHMAXMTU;
+
qca = netdev_priv(dev);
memset(qca, 0, sizeof(struct qcaspi));
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-17 16:29:59 +0000