1 files changed, 51 insertions, 25 deletions

diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index a39131f494ec..2b9d404f8586 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -761,17 +761,25 @@ requeue:
 		dev_kfree_skb_any(new_skb);
 }
 
-static irqreturn_t cpsw_interrupt(int irq, void *dev_id)
+static irqreturn_t cpsw_tx_interrupt(int irq, void *dev_id)
 {
 	struct cpsw_priv *priv = dev_id;
-	int value = irq - priv->irqs_table[0];
 
-	/* NOTICE: Ending IRQ here. The trick with the 'value' variable above
-	 * is to make sure we will always write the correct value to the EOI
-	 * register. Namely 0 for RX_THRESH Interrupt, 1 for RX Interrupt, 2
-	 * for TX Interrupt and 3 for MISC Interrupt.
-	 */
-	cpdma_ctlr_eoi(priv->dma, value);
+	cpdma_ctlr_eoi(priv->dma, CPDMA_EOI_TX);
+	cpdma_chan_process(priv->txch, 128);
+
+	priv = cpsw_get_slave_priv(priv, 1);
+	if (priv)
+		cpdma_chan_process(priv->txch, 128);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t cpsw_rx_interrupt(int irq, void *dev_id)
+{
+	struct cpsw_priv *priv = dev_id;
+
+	cpdma_ctlr_eoi(priv->dma, CPDMA_EOI_RX);
 
 	cpsw_intr_disable(priv);
 	if (priv->irq_enabled == true) {
@@ -1624,7 +1632,8 @@ static void cpsw_ndo_poll_controller(struct net_device *ndev)
 
 	cpsw_intr_disable(priv);
 	cpdma_ctlr_int_ctrl(priv->dma, false);
-	cpsw_interrupt(ndev->irq, priv);
+	cpsw_rx_interrupt(priv->irqs_table[0], priv);
+	cpsw_tx_interrupt(priv->irqs_table[1], priv);
 	cpdma_ctlr_int_ctrl(priv->dma, true);
 	cpsw_intr_enable(priv);
 }
@@ -2192,7 +2201,8 @@ static int cpsw_probe(struct platform_device *pdev)
 	void __iomem			*ss_regs;
 	struct resource			*res, *ss_res;
 	u32 slave_offset, sliver_offset, slave_size;
-	int ret = 0, i, k = 0;
+	int ret = 0, i;
+	int irq;
 
 	ndev = alloc_etherdev(sizeof(struct cpsw_priv));
 	if (!ndev) {
@@ -2374,31 +2384,47 @@ static int cpsw_probe(struct platform_device *pdev)
 		goto clean_dma_ret;
 	}
 
-	ndev->irq = platform_get_irq(pdev, 0);
+	ndev->irq = platform_get_irq(pdev, 1);
 	if (ndev->irq < 0) {
 		dev_err(priv->dev, "error getting irq resource\n");
 		ret = -ENOENT;
 		goto clean_ale_ret;
 	}
 
-	while ((res = platform_get_resource(priv->pdev, IORESOURCE_IRQ, k))) {
-		if (k >= ARRAY_SIZE(priv->irqs_table)) {
-			ret = -EINVAL;
-			goto clean_ale_ret;
-		}
+	/* Grab RX and TX IRQs. Note that we also have RX_THRESHOLD and
+	 * MISC IRQs which are always kept disabled with this driver so
+	 * we will not request them.
+	 *
+	 * If anyone wants to implement support for those, make sure to
+	 * first request and append them to irqs_table array.
+	 */
 
-		ret = devm_request_irq(&pdev->dev, res->start, cpsw_interrupt,
-				       0, dev_name(&pdev->dev), priv);
-		if (ret < 0) {
-			dev_err(priv->dev, "error attaching irq (%d)\n", ret);
-			goto clean_ale_ret;
-		}
+	/* RX IRQ */
+	irq = platform_get_irq(pdev, 1);
+	if (irq < 0)
+		goto clean_ale_ret;
 
-		priv->irqs_table[k] = res->start;
-		k++;
+	priv->irqs_table[0] = irq;
+	ret = devm_request_irq(&pdev->dev, irq, cpsw_rx_interrupt,
+			       0, dev_name(&pdev->dev), priv);
+	if (ret < 0) {
+		dev_err(priv->dev, "error attaching irq (%d)\n", ret);
+		goto clean_ale_ret;
 	}
 
-	priv->num_irqs = k;
+	/* TX IRQ */
+	irq = platform_get_irq(pdev, 2);
+	if (irq < 0)
+		goto clean_ale_ret;
+
+	priv->irqs_table[1] = irq;
+	ret = devm_request_irq(&pdev->dev, irq, cpsw_tx_interrupt,
+			       0, dev_name(&pdev->dev), priv);
+	if (ret < 0) {
+		dev_err(priv->dev, "error attaching irq (%d)\n", ret);
+		goto clean_ale_ret;
+	}
+	priv->num_irqs = 2;
 
 	ndev->features |= NETIF_F_HW_VLAN_CTAG_FILTER;