diff options
Diffstat (limited to 'drivers/net/irda/donauboe.h')
| -rw-r--r-- | drivers/net/irda/donauboe.h | 363 |
1 files changed, 363 insertions, 0 deletions
diff --git a/drivers/net/irda/donauboe.h b/drivers/net/irda/donauboe.h new file mode 100644 index 000000000000..2ab173d9a0e4 --- /dev/null +++ b/drivers/net/irda/donauboe.h @@ -0,0 +1,363 @@ +/********************************************************************* + * + * Filename: toshoboe.h + * Version: 2.16 + * Description: Driver for the Toshiba OBOE (or type-O or 701) + * FIR Chipset, also supports the DONAUOBOE (type-DO + * or d01) FIR chipset which as far as I know is + * register compatible. + * Status: Experimental. + * Author: James McKenzie <james@fishsoup.dhs.org> + * Created at: Sat May 8 12:35:27 1999 + * Modified: 2.16 Martin Lucina <mato@kotelna.sk> + * Modified: 2.16 Sat Jun 22 18:54:29 2002 (sync headers) + * Modified: 2.17 Christian Gennerat <christian.gennerat@polytechnique.org> + * Modified: 2.17 jeu sep 12 08:50:20 2002 (add lock to be used by spinlocks) + * + * Copyright (c) 1999 James McKenzie, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * Neither James McKenzie nor Cambridge University admit liability nor + * provide warranty for any of this software. This material is + * provided "AS-IS" and at no charge. + * + * Applicable Models : Libretto 100/110CT and many more. + * Toshiba refers to this chip as the type-O IR port, + * or the type-DO IR port. + * + * IrDA chip set list from Toshiba Computer Engineering Corp. + * model method maker controler Version + * Portege 320CT FIR,SIR Toshiba Oboe(Triangle) + * Portege 3010CT FIR,SIR Toshiba Oboe(Sydney) + * Portege 3015CT FIR,SIR Toshiba Oboe(Sydney) + * Portege 3020CT FIR,SIR Toshiba Oboe(Sydney) + * Portege 7020CT FIR,SIR ? ? + * + * Satell. 4090XCDT FIR,SIR ? ? + * + * Libretto 100CT FIR,SIR Toshiba Oboe + * Libretto 1000CT FIR,SIR Toshiba Oboe + * + * TECRA750DVD FIR,SIR Toshiba Oboe(Triangle) REV ID=14h + * TECRA780 FIR,SIR Toshiba Oboe(Sandlot) REV ID=32h,33h + * TECRA750CDT FIR,SIR Toshiba Oboe(Triangle) REV ID=13h,14h + * TECRA8000 FIR,SIR Toshiba Oboe(ISKUR) REV ID=23h + * + ********************************************************************/ + +/* The documentation for this chip is allegedly released */ +/* However I have not seen it, not have I managed to contact */ +/* anyone who has. HOWEVER the chip bears a striking resemblence */ +/* to the IrDA controller in the Toshiba RISC TMPR3922 chip */ +/* the documentation for this is freely available at */ +/* http://www.toshiba.com/taec/components/Generic/TMPR3922.shtml */ +/* The mapping between the registers in that document and the */ +/* Registers in the 701 oboe chip are as follows */ + + +/* 3922 reg 701 regs, by bit numbers */ +/* 7- 0 15- 8 24-16 31-25 */ +/* $28 0x0 0x1 */ +/* $2c SEE NOTE 1 */ +/* $30 0x6 0x7 */ +/* $34 0x8 0x9 SEE NOTE 2 */ +/* $38 0x10 0x11 */ +/* $3C 0xe SEE NOTE 3 */ +/* $40 0x12 0x13 */ +/* $44 0x14 0x15 */ +/* $48 0x16 0x17 */ +/* $4c 0x18 0x19 */ +/* $50 0x1a 0x1b */ + +/* FIXME: could be 0x1b 0x1a here */ + +/* $54 0x1d 0x1c */ +/* $5C 0xf SEE NOTE 4 */ +/* $130 SEE NOTE 5 */ +/* $134 SEE NOTE 6 */ +/* */ +/* NOTES: */ +/* 1. The pointer to ring is packed in most unceremoniusly */ +/* 701 Register Address bits (A9-A0 must be zero) */ +/* 0x4: A17 A16 A15 A14 A13 A12 A11 A10 */ +/* 0x5: A25 A24 A23 A22 A21 A20 A19 A18 */ +/* 0x2: 0 0 A31 A30 A29 A28 A27 A26 */ +/* */ +/* 2. The M$ drivers do a write 0x1 to 0x9, however the 3922 */ +/* documentation would suggest that a write of 0x1 to 0x8 */ +/* would be more appropriate. */ +/* */ +/* 3. This assignment is tenuous at best, register 0xe seems to */ +/* have bits arranged 0 0 0 R/W R/W R/W R/W R/W */ +/* if either of the lower two bits are set the chip seems to */ +/* switch off */ +/* */ +/* 4. Bits 7-4 seem to be different 4 seems just to be generic */ +/* receiver busy flag */ +/* */ +/* 5. and 6. The IER and ISR have a different bit assignment */ +/* The lower three bits of both read back as ones */ +/* ISR is register 0xc, IER is register 0xd */ +/* 7 6 5 4 3 2 1 0 */ +/* 0xc: TxDone RxDone TxUndr RxOver SipRcv 1 1 1 */ +/* 0xd: TxDone RxDone TxUndr RxOver SipRcv 1 1 1 */ +/* TxDone xmitt done (generated only if generate interrupt bit */ +/* is set in the ring) */ +/* RxDone recv completed (or other recv condition if you set it */ +/* up */ +/* TxUnder underflow in Transmit FIFO */ +/* RxOver overflow in Recv FIFO */ +/* SipRcv received serial gap (or other condition you set) */ +/* Interrupts are enabled by writing a one to the IER register */ +/* Interrupts are cleared by writting a one to the ISR register */ +/* */ +/* 6. The remaining registers: 0x6 and 0x3 appear to be */ +/* reserved parts of 16 or 32 bit registersthe remainder */ +/* 0xa 0xb 0x1e 0x1f could possibly be (by their behaviour) */ +/* the Unicast Filter register at $58. */ +/* */ +/* 7. While the core obviously expects 32 bit accesses all the */ +/* M$ drivers do 8 bit accesses, infact the Miniport ones */ +/* write and read back the byte serveral times (why?) */ + + +#ifndef TOSHOBOE_H +#define TOSHOBOE_H + +/* Registers */ + +#define OBOE_IO_EXTENT 0x1f + +/*Receive and transmit slot pointers */ +#define OBOE_REG(i) (i+(self->base)) +#define OBOE_RXSLOT OBOE_REG(0x0) +#define OBOE_TXSLOT OBOE_REG(0x1) +#define OBOE_SLOT_MASK 0x3f + +#define OBOE_TXRING_OFFSET 0x200 +#define OBOE_TXRING_OFFSET_IN_SLOTS 0x40 + +/*pointer to the ring */ +#define OBOE_RING_BASE0 OBOE_REG(0x4) +#define OBOE_RING_BASE1 OBOE_REG(0x5) +#define OBOE_RING_BASE2 OBOE_REG(0x2) +#define OBOE_RING_BASE3 OBOE_REG(0x3) + +/*Number of slots in the ring */ +#define OBOE_RING_SIZE OBOE_REG(0x7) +#define OBOE_RING_SIZE_RX4 0x00 +#define OBOE_RING_SIZE_RX8 0x01 +#define OBOE_RING_SIZE_RX16 0x03 +#define OBOE_RING_SIZE_RX32 0x07 +#define OBOE_RING_SIZE_RX64 0x0f +#define OBOE_RING_SIZE_TX4 0x00 +#define OBOE_RING_SIZE_TX8 0x10 +#define OBOE_RING_SIZE_TX16 0x30 +#define OBOE_RING_SIZE_TX32 0x70 +#define OBOE_RING_SIZE_TX64 0xf0 + +#define OBOE_RING_MAX_SIZE 64 + +/*Causes the gubbins to re-examine the ring */ +#define OBOE_PROMPT OBOE_REG(0x9) +#define OBOE_PROMPT_BIT 0x1 + +/* Interrupt Status Register */ +#define OBOE_ISR OBOE_REG(0xc) +/* Interrupt Enable Register */ +#define OBOE_IER OBOE_REG(0xd) +/* Interrupt bits for IER and ISR */ +#define OBOE_INT_TXDONE 0x80 +#define OBOE_INT_RXDONE 0x40 +#define OBOE_INT_TXUNDER 0x20 +#define OBOE_INT_RXOVER 0x10 +#define OBOE_INT_SIP 0x08 +#define OBOE_INT_MASK 0xf8 + +/*Reset Register */ +#define OBOE_CONFIG1 OBOE_REG(0xe) +#define OBOE_CONFIG1_RST 0x01 +#define OBOE_CONFIG1_DISABLE 0x02 +#define OBOE_CONFIG1_4 0x08 +#define OBOE_CONFIG1_8 0x08 + +#define OBOE_CONFIG1_ON 0x8 +#define OBOE_CONFIG1_RESET 0xf +#define OBOE_CONFIG1_OFF 0xe + +#define OBOE_STATUS OBOE_REG(0xf) +#define OBOE_STATUS_RXBUSY 0x10 +#define OBOE_STATUS_FIRRX 0x04 +#define OBOE_STATUS_MIRRX 0x02 +#define OBOE_STATUS_SIRRX 0x01 + + +/*Speed control registers */ +#define OBOE_CONFIG0L OBOE_REG(0x10) +#define OBOE_CONFIG0H OBOE_REG(0x11) + +#define OBOE_CONFIG0H_TXONLOOP 0x80 /*Transmit when looping (dangerous) */ +#define OBOE_CONFIG0H_LOOP 0x40 /*Loopback Tx->Rx */ +#define OBOE_CONFIG0H_ENTX 0x10 /*Enable Tx */ +#define OBOE_CONFIG0H_ENRX 0x08 /*Enable Rx */ +#define OBOE_CONFIG0H_ENDMAC 0x04 /*Enable/reset* the DMA controller */ +#define OBOE_CONFIG0H_RCVANY 0x02 /*DMA mode 1=bytes, 0=dwords */ + +#define OBOE_CONFIG0L_CRC16 0x80 /*CRC 1=16 bit 0=32 bit */ +#define OBOE_CONFIG0L_ENFIR 0x40 /*Enable FIR */ +#define OBOE_CONFIG0L_ENMIR 0x20 /*Enable MIR */ +#define OBOE_CONFIG0L_ENSIR 0x10 /*Enable SIR */ +#define OBOE_CONFIG0L_ENSIRF 0x08 /*Enable SIR framer */ +#define OBOE_CONFIG0L_SIRTEST 0x04 /*Enable SIR framer in MIR and FIR */ +#define OBOE_CONFIG0L_INVERTTX 0x02 /*Invert Tx Line */ +#define OBOE_CONFIG0L_INVERTRX 0x01 /*Invert Rx Line */ + +#define OBOE_BOF OBOE_REG(0x12) +#define OBOE_EOF OBOE_REG(0x13) + +#define OBOE_ENABLEL OBOE_REG(0x14) +#define OBOE_ENABLEH OBOE_REG(0x15) + +#define OBOE_ENABLEH_PHYANDCLOCK 0x80 /*Toggle low to copy config in */ +#define OBOE_ENABLEH_CONFIGERR 0x40 +#define OBOE_ENABLEH_FIRON 0x20 +#define OBOE_ENABLEH_MIRON 0x10 +#define OBOE_ENABLEH_SIRON 0x08 +#define OBOE_ENABLEH_ENTX 0x04 +#define OBOE_ENABLEH_ENRX 0x02 +#define OBOE_ENABLEH_CRC16 0x01 + +#define OBOE_ENABLEL_BROADCAST 0x01 + +#define OBOE_CURR_PCONFIGL OBOE_REG(0x16) /*Current config */ +#define OBOE_CURR_PCONFIGH OBOE_REG(0x17) + +#define OBOE_NEW_PCONFIGL OBOE_REG(0x18) +#define OBOE_NEW_PCONFIGH OBOE_REG(0x19) + +#define OBOE_PCONFIGH_BAUDMASK 0xfc +#define OBOE_PCONFIGH_WIDTHMASK 0x04 +#define OBOE_PCONFIGL_WIDTHMASK 0xe0 +#define OBOE_PCONFIGL_PREAMBLEMASK 0x1f + +#define OBOE_PCONFIG_BAUDMASK 0xfc00 +#define OBOE_PCONFIG_BAUDSHIFT 10 +#define OBOE_PCONFIG_WIDTHMASK 0x04e0 +#define OBOE_PCONFIG_WIDTHSHIFT 5 +#define OBOE_PCONFIG_PREAMBLEMASK 0x001f +#define OBOE_PCONFIG_PREAMBLESHIFT 0 + +#define OBOE_MAXLENL OBOE_REG(0x1a) +#define OBOE_MAXLENH OBOE_REG(0x1b) + +#define OBOE_RXCOUNTH OBOE_REG(0x1c) /*Reset on recipt */ +#define OBOE_RXCOUNTL OBOE_REG(0x1d) /*of whole packet */ + +/* The PCI ID of the OBOE chip */ +#ifndef PCI_DEVICE_ID_FIR701 +#define PCI_DEVICE_ID_FIR701 0x0701 +#endif + +#ifndef PCI_DEVICE_ID_FIRD01 +#define PCI_DEVICE_ID_FIRD01 0x0d01 +#endif + +struct OboeSlot +{ + __u16 len; /*Tweleve bits of packet length */ + __u8 unused; + __u8 control; /*Slot control/status see below */ + __u32 address; /*Slot buffer address */ +} +__attribute__ ((packed)); + +#define OBOE_NTASKS OBOE_TXRING_OFFSET_IN_SLOTS + +struct OboeRing +{ + struct OboeSlot rx[OBOE_NTASKS]; + struct OboeSlot tx[OBOE_NTASKS]; +}; + +#define OBOE_RING_LEN (sizeof(struct OboeRing)) + + +#define OBOE_CTL_TX_HW_OWNS 0x80 /*W/R This slot owned by the hardware */ +#define OBOE_CTL_TX_DISTX_CRC 0x40 /*W Disable CRC generation for [FM]IR */ +#define OBOE_CTL_TX_BAD_CRC 0x20 /*W Generate bad CRC */ +#define OBOE_CTL_TX_SIP 0x10 /*W Generate an SIP after xmittion */ +#define OBOE_CTL_TX_MKUNDER 0x08 /*W Generate an underrun error */ +#define OBOE_CTL_TX_RTCENTX 0x04 /*W Enable receiver and generate TXdone */ + /* After this slot is processed */ +#define OBOE_CTL_TX_UNDER 0x01 /*R Set by hardware to indicate underrun */ + + +#define OBOE_CTL_RX_HW_OWNS 0x80 /*W/R This slot owned by hardware */ +#define OBOE_CTL_RX_PHYERR 0x40 /*R Decoder error on receiption */ +#define OBOE_CTL_RX_CRCERR 0x20 /*R CRC error only set for [FM]IR */ +#define OBOE_CTL_RX_LENGTH 0x10 /*R Packet > max Rx length */ +#define OBOE_CTL_RX_OVER 0x08 /*R set to indicate an overflow */ +#define OBOE_CTL_RX_SIRBAD 0x04 /*R SIR had BOF in packet or ABORT sequence */ +#define OBOE_CTL_RX_RXEOF 0x02 /*R Finished receiving on this slot */ + + +struct toshoboe_cb +{ + struct net_device *netdev; /* Yes! we are some kind of netdevice */ + struct net_device_stats stats; + struct tty_driver ttydev; + + struct irlap_cb *irlap; /* The link layer we are binded to */ + + chipio_t io; /* IrDA controller information */ + struct qos_info qos; /* QoS capabilities for this device */ + + __u32 flags; /* Interface flags */ + + struct pci_dev *pdev; /*PCI device */ + int base; /*IO base */ + + + int txpending; /*how many tx's are pending */ + int txs, rxs; /*Which slots are we at */ + + int irdad; /*Driver under control of netdev end */ + int async; /*Driver under control of async end */ + + + int stopped; /*Stopped by some or other APM stuff */ + + int filter; /*In SIR mode do we want to receive + frames or byte ranges */ + + void *ringbuf; /*The ring buffer */ + struct OboeRing *ring; /*The ring */ + + void *tx_bufs[OBOE_RING_MAX_SIZE]; /*The buffers */ + void *rx_bufs[OBOE_RING_MAX_SIZE]; + + + int speed; /*Current setting of the speed */ + int new_speed; /*Set to request a speed change */ + +/* The spinlock protect critical parts of the driver. + * Locking is done like this : + * spin_lock_irqsave(&self->spinlock, flags); + * Releasing the lock : + * spin_unlock_irqrestore(&self->spinlock, flags); + */ + spinlock_t spinlock; + /* Used for the probe and diagnostics code */ + int int_rx; + int int_tx; + int int_txunder; + int int_rxover; + int int_sip; +}; + + +#endif |