diff options
Diffstat (limited to 'drivers/net/irda/smsc-ircc2.h')
| -rw-r--r-- | drivers/net/irda/smsc-ircc2.h | 194 |
1 files changed, 194 insertions, 0 deletions
diff --git a/drivers/net/irda/smsc-ircc2.h b/drivers/net/irda/smsc-ircc2.h new file mode 100644 index 000000000000..458611cc0d40 --- /dev/null +++ b/drivers/net/irda/smsc-ircc2.h @@ -0,0 +1,194 @@ +/********************************************************************* + * $Id: smsc-ircc2.h,v 1.12.2.1 2002/10/27 10:52:37 dip Exp $ + * + * Description: Definitions for the SMC IrCC chipset + * Status: Experimental. + * Author: Daniele Peri (peri@csai.unipa.it) + * + * Copyright (c) 2002 Daniele Peri + * All Rights Reserved. + * + * Based on smc-ircc.h: + * + * Copyright (c) 1999-2000, Dag Brattli <dagb@cs.uit.no> + * Copyright (c) 1998-1999, Thomas Davis (tadavis@jps.net> + * All Rights Reserved + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + ********************************************************************/ + +#ifndef SMSC_IRCC2_H +#define SMSC_IRCC2_H + +/* DMA modes needed */ +#define DMA_TX_MODE 0x08 /* Mem to I/O, ++, demand. */ +#define DMA_RX_MODE 0x04 /* I/O to mem, ++, demand. */ + +/* Master Control Register */ +#define IRCC_MASTER 0x07 +#define IRCC_MASTER_POWERDOWN 0x80 +#define IRCC_MASTER_RESET 0x40 +#define IRCC_MASTER_INT_EN 0x20 +#define IRCC_MASTER_ERROR_RESET 0x10 + +/* Register block 0 */ + +/* Interrupt Identification */ +#define IRCC_IIR 0x01 +#define IRCC_IIR_ACTIVE_FRAME 0x80 +#define IRCC_IIR_EOM 0x40 +#define IRCC_IIR_RAW_MODE 0x20 +#define IRCC_IIR_FIFO 0x10 + +/* Interrupt Enable */ +#define IRCC_IER 0x02 +#define IRCC_IER_ACTIVE_FRAME 0x80 +#define IRCC_IER_EOM 0x40 +#define IRCC_IER_RAW_MODE 0x20 +#define IRCC_IER_FIFO 0x10 + +/* Line Status Register */ +#define IRCC_LSR 0x03 +#define IRCC_LSR_UNDERRUN 0x80 +#define IRCC_LSR_OVERRUN 0x40 +#define IRCC_LSR_FRAME_ERROR 0x20 +#define IRCC_LSR_SIZE_ERROR 0x10 +#define IRCC_LSR_CRC_ERROR 0x80 +#define IRCC_LSR_FRAME_ABORT 0x40 + +/* Line Status Address Register */ +#define IRCC_LSAR 0x03 +#define IRCC_LSAR_ADDRESS_MASK 0x07 + +/* Line Control Register A */ +#define IRCC_LCR_A 0x04 +#define IRCC_LCR_A_FIFO_RESET 0x80 +#define IRCC_LCR_A_FAST 0x40 +#define IRCC_LCR_A_GP_DATA 0x20 +#define IRCC_LCR_A_RAW_TX 0x10 +#define IRCC_LCR_A_RAW_RX 0x08 +#define IRCC_LCR_A_ABORT 0x04 +#define IRCC_LCR_A_DATA_DONE 0x02 + +/* Line Control Register B */ +#define IRCC_LCR_B 0x05 +#define IRCC_LCR_B_SCE_DISABLED 0x00 +#define IRCC_LCR_B_SCE_TRANSMIT 0x40 +#define IRCC_LCR_B_SCE_RECEIVE 0x80 +#define IRCC_LCR_B_SCE_UNDEFINED 0xc0 +#define IRCC_LCR_B_SIP_ENABLE 0x20 +#define IRCC_LCR_B_BRICK_WALL 0x10 + +/* Bus Status Register */ +#define IRCC_BSR 0x06 +#define IRCC_BSR_NOT_EMPTY 0x80 +#define IRCC_BSR_FIFO_FULL 0x40 +#define IRCC_BSR_TIMEOUT 0x20 + +/* Register block 1 */ + +#define IRCC_FIFO_THRESHOLD 0x02 + +#define IRCC_SCE_CFGA 0x00 +#define IRCC_CFGA_AUX_IR 0x80 +#define IRCC_CFGA_HALF_DUPLEX 0x04 +#define IRCC_CFGA_TX_POLARITY 0x02 +#define IRCC_CFGA_RX_POLARITY 0x01 + +#define IRCC_CFGA_COM 0x00 +#define IRCC_SCE_CFGA_BLOCK_CTRL_BITS_MASK 0x87 +#define IRCC_CFGA_IRDA_SIR_A 0x08 +#define IRCC_CFGA_ASK_SIR 0x10 +#define IRCC_CFGA_IRDA_SIR_B 0x18 +#define IRCC_CFGA_IRDA_HDLC 0x20 +#define IRCC_CFGA_IRDA_4PPM 0x28 +#define IRCC_CFGA_CONSUMER 0x30 +#define IRCC_CFGA_RAW_IR 0x38 +#define IRCC_CFGA_OTHER 0x40 + +#define IRCC_IR_HDLC 0x04 +#define IRCC_IR_4PPM 0x01 +#define IRCC_IR_CONSUMER 0x02 + +#define IRCC_SCE_CFGB 0x01 +#define IRCC_CFGB_LOOPBACK 0x20 +#define IRCC_CFGB_LPBCK_TX_CRC 0x10 +#define IRCC_CFGB_NOWAIT 0x08 +#define IRCC_CFGB_STRING_MOVE 0x04 +#define IRCC_CFGB_DMA_BURST 0x02 +#define IRCC_CFGB_DMA_ENABLE 0x01 + +#define IRCC_CFGB_MUX_COM 0x00 +#define IRCC_CFGB_MUX_IR 0x40 +#define IRCC_CFGB_MUX_AUX 0x80 +#define IRCC_CFGB_MUX_INACTIVE 0xc0 + +/* Register block 3 - Identification Registers! */ +#define IRCC_ID_HIGH 0x00 /* 0x10 */ +#define IRCC_ID_LOW 0x01 /* 0xB8 */ +#define IRCC_CHIP_ID 0x02 /* 0xF1 */ +#define IRCC_VERSION 0x03 /* 0x01 */ +#define IRCC_INTERFACE 0x04 /* low 4 = DMA, high 4 = IRQ */ +#define IRCC_INTERFACE_DMA_MASK 0x0F /* low 4 = DMA, high 4 = IRQ */ +#define IRCC_INTERFACE_IRQ_MASK 0xF0 /* low 4 = DMA, high 4 = IRQ */ + +/* Register block 4 - IrDA */ +#define IRCC_CONTROL 0x00 +#define IRCC_BOF_COUNT_LO 0x01 /* Low byte */ +#define IRCC_BOF_COUNT_HI 0x00 /* High nibble (bit 0-3) */ +#define IRCC_BRICKWALL_CNT_LO 0x02 /* Low byte */ +#define IRCC_BRICKWALL_CNT_HI 0x03 /* High nibble (bit 4-7) */ +#define IRCC_TX_SIZE_LO 0x04 /* Low byte */ +#define IRCC_TX_SIZE_HI 0x03 /* High nibble (bit 0-3) */ +#define IRCC_RX_SIZE_HI 0x05 /* High nibble (bit 0-3) */ +#define IRCC_RX_SIZE_LO 0x06 /* Low byte */ + +#define IRCC_1152 0x80 +#define IRCC_CRC 0x40 + +/* Register block 5 - IrDA */ +#define IRCC_ATC 0x00 +#define IRCC_ATC_nPROGREADY 0x80 +#define IRCC_ATC_SPEED 0x40 +#define IRCC_ATC_ENABLE 0x20 +#define IRCC_ATC_MASK 0xE0 + + +#define IRCC_IRHALFDUPLEX_TIMEOUT 0x01 + +#define IRCC_SCE_TX_DELAY_TIMER 0x02 + +/* + * Other definitions + */ + +#define SMSC_IRCC2_MAX_SIR_SPEED 115200 +#define SMSC_IRCC2_FIR_CHIP_IO_EXTENT 8 +#define SMSC_IRCC2_SIR_CHIP_IO_EXTENT 8 +#define SMSC_IRCC2_FIFO_SIZE 16 +#define SMSC_IRCC2_FIFO_THRESHOLD 64 +/* Max DMA buffer size needed = (data_size + 6) * (window_size) + 6; */ +#define SMSC_IRCC2_RX_BUFF_TRUESIZE 14384 +#define SMSC_IRCC2_TX_BUFF_TRUESIZE 14384 +#define SMSC_IRCC2_MIN_TURN_TIME 0x07 +#define SMSC_IRCC2_WINDOW_SIZE 0x07 +/* Maximum wait for hw transmitter to finish */ +#define SMSC_IRCC2_HW_TRANSMITTER_TIMEOUT_US 1000 /* 1 ms */ +/* Maximum wait for ATC transceiver programming to finish */ +#define SMSC_IRCC2_ATC_PROGRAMMING_TIMEOUT_JIFFIES 1 +#endif /* SMSC_IRCC2_H */ |