diff options
Diffstat (limited to 'drivers/net/ixp2000/ixp2400_rx.uc')
-rw-r--r-- | drivers/net/ixp2000/ixp2400_rx.uc | 408 |
1 files changed, 408 insertions, 0 deletions
diff --git a/drivers/net/ixp2000/ixp2400_rx.uc b/drivers/net/ixp2000/ixp2400_rx.uc new file mode 100644 index 000000000000..42a73e357afa --- /dev/null +++ b/drivers/net/ixp2000/ixp2400_rx.uc @@ -0,0 +1,408 @@ +/* + * RX ucode for the Intel IXP2400 in POS-PHY mode. + * Copyright (C) 2004, 2005 Lennert Buytenhek + * Dedicated to Marija Kulikova. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Assumptions made in this code: + * - The IXP2400 MSF is configured for POS-PHY mode, in a mode where + * only one full element list is used. This includes, for example, + * 1x32 SPHY and 1x32 MPHY32, but not 4x8 SPHY or 1x32 MPHY4. (This + * is not an exhaustive list.) + * - The RBUF uses 64-byte mpackets. + * - RX descriptors reside in SRAM, and have the following format: + * struct rx_desc + * { + * // to uengine + * u32 buf_phys_addr; + * u32 buf_length; + * + * // from uengine + * u32 channel; + * u32 pkt_length; + * }; + * - Packet data resides in DRAM. + * - Packet buffer addresses are 8-byte aligned. + * - Scratch ring 0 is rx_pending. + * - Scratch ring 1 is rx_done, and has status condition 'full'. + * - The host triggers rx_done flush and rx_pending refill on seeing INTA. + * - This code is run on all eight threads of the microengine it runs on. + * + * Local memory is used for per-channel RX state. + */ + +#define RX_THREAD_FREELIST_0 0x0030 +#define RBUF_ELEMENT_DONE 0x0044 + +#define CHANNEL_FLAGS *l$index0[0] +#define CHANNEL_FLAG_RECEIVING 1 +#define PACKET_LENGTH *l$index0[1] +#define PACKET_CHECKSUM *l$index0[2] +#define BUFFER_HANDLE *l$index0[3] +#define BUFFER_START *l$index0[4] +#define BUFFER_LENGTH *l$index0[5] + +#define CHANNEL_STATE_SIZE 24 // in bytes +#define CHANNEL_STATE_SHIFT 5 // ceil(log2(state size)) + + + .sig volatile sig1 + .sig volatile sig2 + .sig volatile sig3 + + .sig mpacket_arrived + .reg add_to_rx_freelist + .reg read $rsw0, $rsw1 + .xfer_order $rsw0 $rsw1 + + .reg zero + + /* + * Initialise add_to_rx_freelist. + */ + .begin + .reg temp + .reg temp2 + + immed[add_to_rx_freelist, RX_THREAD_FREELIST_0] + immed_w1[add_to_rx_freelist, (&$rsw0 | (&mpacket_arrived << 12))] + + local_csr_rd[ACTIVE_CTX_STS] + immed[temp, 0] + alu[temp2, temp, and, 0x1f] + alu_shf[add_to_rx_freelist, add_to_rx_freelist, or, temp2, <<20] + alu[temp2, temp, and, 0x80] + alu_shf[add_to_rx_freelist, add_to_rx_freelist, or, temp2, <<18] + .end + + immed[zero, 0] + + /* + * Skip context 0 initialisation? + */ + .begin + br!=ctx[0, mpacket_receive_loop#] + .end + + /* + * Initialise local memory. + */ + .begin + .reg addr + .reg temp + + immed[temp, 0] + init_local_mem_loop#: + alu_shf[addr, --, b, temp, <<CHANNEL_STATE_SHIFT] + local_csr_wr[ACTIVE_LM_ADDR_0, addr] + nop + nop + nop + + immed[CHANNEL_FLAGS, 0] + + alu[temp, temp, +, 1] + alu[--, temp, and, 0x20] + beq[init_local_mem_loop#] + .end + + /* + * Initialise signal pipeline. + */ + .begin + local_csr_wr[SAME_ME_SIGNAL, (&sig1 << 3)] + .set_sig sig1 + + local_csr_wr[SAME_ME_SIGNAL, (&sig2 << 3)] + .set_sig sig2 + + local_csr_wr[SAME_ME_SIGNAL, (&sig3 << 3)] + .set_sig sig3 + .end + +mpacket_receive_loop#: + /* + * Synchronise and wait for mpacket. + */ + .begin + ctx_arb[sig1] + local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig1 << 3))] + + msf[fast_wr, --, add_to_rx_freelist, 0] + .set_sig mpacket_arrived + ctx_arb[mpacket_arrived] + .set $rsw0 $rsw1 + .end + + /* + * We halt if we see {inbparerr,parerr,null,soperror}. + */ + .begin + alu_shf[--, 0x1b, and, $rsw0, >>8] + bne[abort_rswerr#] + .end + + /* + * Point local memory pointer to this channel's state area. + */ + .begin + .reg chanaddr + + alu[chanaddr, $rsw0, and, 0x1f] + alu_shf[chanaddr, --, b, chanaddr, <<CHANNEL_STATE_SHIFT] + local_csr_wr[ACTIVE_LM_ADDR_0, chanaddr] + nop + nop + nop + .end + + /* + * Check whether we received a SOP mpacket while we were already + * working on a packet, or a non-SOP mpacket while there was no + * packet pending. (SOP == RECEIVING -> abort) If everything's + * okay, update the RECEIVING flag to reflect our new state. + */ + .begin + .reg temp + .reg eop + + #if CHANNEL_FLAG_RECEIVING != 1 + #error CHANNEL_FLAG_RECEIVING is not 1 + #endif + + alu_shf[temp, 1, and, $rsw0, >>15] + alu[temp, temp, xor, CHANNEL_FLAGS] + alu[--, temp, and, CHANNEL_FLAG_RECEIVING] + beq[abort_proterr#] + + alu_shf[eop, 1, and, $rsw0, >>14] + alu[CHANNEL_FLAGS, temp, xor, eop] + .end + + /* + * Copy the mpacket into the right spot, and in case of EOP, + * write back the descriptor and pass the packet on. + */ + .begin + .reg buffer_offset + .reg _packet_length + .reg _packet_checksum + .reg _buffer_handle + .reg _buffer_start + .reg _buffer_length + + /* + * Determine buffer_offset, _packet_length and + * _packet_checksum. + */ + .begin + .reg temp + + alu[--, 1, and, $rsw0, >>15] + beq[not_sop#] + + immed[PACKET_LENGTH, 0] + immed[PACKET_CHECKSUM, 0] + + not_sop#: + alu[buffer_offset, --, b, PACKET_LENGTH] + alu_shf[temp, 0xff, and, $rsw0, >>16] + alu[_packet_length, buffer_offset, +, temp] + alu[PACKET_LENGTH, --, b, _packet_length] + + immed[temp, 0xffff] + alu[temp, $rsw1, and, temp] + alu[_packet_checksum, PACKET_CHECKSUM, +, temp] + alu[PACKET_CHECKSUM, --, b, _packet_checksum] + .end + + /* + * Allocate buffer in case of SOP. + */ + .begin + .reg temp + + alu[temp, 1, and, $rsw0, >>15] + beq[skip_buffer_alloc#] + + .begin + .sig zzz + .reg read $stemp $stemp2 + .xfer_order $stemp $stemp2 + + rx_nobufs#: + scratch[get, $stemp, zero, 0, 1], ctx_swap[zzz] + alu[_buffer_handle, --, b, $stemp] + beq[rx_nobufs#] + + sram[read, $stemp, _buffer_handle, 0, 2], + ctx_swap[zzz] + alu[_buffer_start, --, b, $stemp] + alu[_buffer_length, --, b, $stemp2] + .end + + skip_buffer_alloc#: + .end + + /* + * Resynchronise. + */ + .begin + ctx_arb[sig2] + local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig2 << 3))] + .end + + /* + * Synchronise buffer state. + */ + .begin + .reg temp + + alu[temp, 1, and, $rsw0, >>15] + beq[copy_from_local_mem#] + + alu[BUFFER_HANDLE, --, b, _buffer_handle] + alu[BUFFER_START, --, b, _buffer_start] + alu[BUFFER_LENGTH, --, b, _buffer_length] + br[sync_state_done#] + + copy_from_local_mem#: + alu[_buffer_handle, --, b, BUFFER_HANDLE] + alu[_buffer_start, --, b, BUFFER_START] + alu[_buffer_length, --, b, BUFFER_LENGTH] + + sync_state_done#: + .end + +#if 0 + /* + * Debug buffer state management. + */ + .begin + .reg temp + + alu[temp, 1, and, $rsw0, >>14] + beq[no_poison#] + immed[BUFFER_HANDLE, 0xdead] + immed[BUFFER_START, 0xdead] + immed[BUFFER_LENGTH, 0xdead] + no_poison#: + + immed[temp, 0xdead] + alu[--, _buffer_handle, -, temp] + beq[state_corrupted#] + alu[--, _buffer_start, -, temp] + beq[state_corrupted#] + alu[--, _buffer_length, -, temp] + beq[state_corrupted#] + .end +#endif + + /* + * Check buffer length. + */ + .begin + alu[--, _buffer_length, -, _packet_length] + blo[buffer_overflow#] + .end + + /* + * Copy the mpacket and give back the RBUF element. + */ + .begin + .reg element + .reg xfer_size + .reg temp + .sig copy_sig + + alu_shf[element, 0x7f, and, $rsw0, >>24] + alu_shf[xfer_size, 0xff, and, $rsw0, >>16] + + alu[xfer_size, xfer_size, -, 1] + alu_shf[xfer_size, 0x10, or, xfer_size, >>3] + alu_shf[temp, 0x10, or, xfer_size, <<21] + alu_shf[temp, temp, or, element, <<11] + alu_shf[--, temp, or, 1, <<18] + + dram[rbuf_rd, --, _buffer_start, buffer_offset, max_8], + indirect_ref, sig_done[copy_sig] + ctx_arb[copy_sig] + + alu[temp, RBUF_ELEMENT_DONE, or, element, <<16] + msf[fast_wr, --, temp, 0] + .end + + /* + * If EOP, write back the packet descriptor. + */ + .begin + .reg write $stemp $stemp2 + .xfer_order $stemp $stemp2 + .sig zzz + + alu_shf[--, 1, and, $rsw0, >>14] + beq[no_writeback#] + + alu[$stemp, $rsw0, and, 0x1f] + alu[$stemp2, --, b, _packet_length] + sram[write, $stemp, _buffer_handle, 8, 2], ctx_swap[zzz] + + no_writeback#: + .end + + /* + * Resynchronise. + */ + .begin + ctx_arb[sig3] + local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig3 << 3))] + .end + + /* + * If EOP, put the buffer back onto the scratch ring. + */ + .begin + .reg write $stemp + .sig zzz + + br_inp_state[SCR_Ring1_Status, rx_done_ring_overflow#] + + alu_shf[--, 1, and, $rsw0, >>14] + beq[mpacket_receive_loop#] + + alu[--, 1, and, $rsw0, >>10] + bne[rxerr#] + + alu[$stemp, --, b, _buffer_handle] + scratch[put, $stemp, zero, 4, 1], ctx_swap[zzz] + cap[fast_wr, 0, XSCALE_INT_A] + br[mpacket_receive_loop#] + + rxerr#: + alu[$stemp, --, b, _buffer_handle] + scratch[put, $stemp, zero, 0, 1], ctx_swap[zzz] + br[mpacket_receive_loop#] + .end + .end + + +abort_rswerr#: + halt + +abort_proterr#: + halt + +state_corrupted#: + halt + +buffer_overflow#: + halt + +rx_done_ring_overflow#: + halt + + |