diff options
Diffstat (limited to 'drivers/net/phy/phy.c')
| -rw-r--r-- | drivers/net/phy/phy.c | 194 |
1 files changed, 140 insertions, 54 deletions
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index c94a1fb3a4be..eed433d6056a 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -39,7 +39,9 @@ #include <asm/irq.h> #include <asm/uaccess.h> -/* Convenience function to print out the current phy status +/** + * phy_print_status - Convenience function to print out the current phy status + * @phydev: the phy_device struct */ void phy_print_status(struct phy_device *phydev) { @@ -55,10 +57,15 @@ void phy_print_status(struct phy_device *phydev) EXPORT_SYMBOL(phy_print_status); -/* Convenience functions for reading/writing a given PHY - * register. They MUST NOT be called from interrupt context, +/** + * phy_read - Convenience function for reading a given PHY register + * @phydev: the phy_device struct + * @regnum: register number to read + * + * NOTE: MUST NOT be called from interrupt context, * because the bus read/write functions may wait for an interrupt - * to conclude the operation. */ + * to conclude the operation. + */ int phy_read(struct phy_device *phydev, u16 regnum) { int retval; @@ -72,6 +79,16 @@ int phy_read(struct phy_device *phydev, u16 regnum) } EXPORT_SYMBOL(phy_read); +/** + * phy_write - Convenience function for writing a given PHY register + * @phydev: the phy_device struct + * @regnum: register number to write + * @val: value to write to @regnum + * + * NOTE: MUST NOT be called from interrupt context, + * because the bus read/write functions may wait for an interrupt + * to conclude the operation. + */ int phy_write(struct phy_device *phydev, u16 regnum, u16 val) { int err; @@ -85,7 +102,15 @@ int phy_write(struct phy_device *phydev, u16 regnum, u16 val) } EXPORT_SYMBOL(phy_write); - +/** + * phy_clear_interrupt - Ack the phy device's interrupt + * @phydev: the phy_device struct + * + * If the @phydev driver has an ack_interrupt function, call it to + * ack and clear the phy device's interrupt. + * + * Returns 0 on success on < 0 on error. + */ int phy_clear_interrupt(struct phy_device *phydev) { int err = 0; @@ -96,7 +121,13 @@ int phy_clear_interrupt(struct phy_device *phydev) return err; } - +/** + * phy_config_interrupt - configure the PHY device for the requested interrupts + * @phydev: the phy_device struct + * @interrupts: interrupt flags to configure for this @phydev + * + * Returns 0 on success on < 0 on error. + */ int phy_config_interrupt(struct phy_device *phydev, u32 interrupts) { int err = 0; @@ -109,9 +140,11 @@ int phy_config_interrupt(struct phy_device *phydev, u32 interrupts) } -/* phy_aneg_done +/** + * phy_aneg_done - return auto-negotiation status + * @phydev: target phy_device struct * - * description: Reads the status register and returns 0 either if + * Description: Reads the status register and returns 0 either if * auto-negotiation is incomplete, or if there was an error. * Returns BMSR_ANEGCOMPLETE if auto-negotiation is done. */ @@ -173,9 +206,12 @@ static const struct phy_setting settings[] = { #define MAX_NUM_SETTINGS (sizeof(settings)/sizeof(struct phy_setting)) -/* phy_find_setting +/** + * phy_find_setting - find a PHY settings array entry that matches speed & duplex + * @speed: speed to match + * @duplex: duplex to match * - * description: Searches the settings array for the setting which + * Description: Searches the settings array for the setting which * matches the desired speed and duplex, and returns the index * of that setting. Returns the index of the last setting if * none of the others match. @@ -192,11 +228,12 @@ static inline int phy_find_setting(int speed, int duplex) return idx < MAX_NUM_SETTINGS ? idx : MAX_NUM_SETTINGS - 1; } -/* phy_find_valid - * idx: The first index in settings[] to search - * features: A mask of the valid settings +/** + * phy_find_valid - find a PHY setting that matches the requested features mask + * @idx: The first index in settings[] to search + * @features: A mask of the valid settings * - * description: Returns the index of the first valid setting less + * Description: Returns the index of the first valid setting less * than or equal to the one pointed to by idx, as determined by * the mask in features. Returns the index of the last setting * if nothing else matches. @@ -209,11 +246,13 @@ static inline int phy_find_valid(int idx, u32 features) return idx < MAX_NUM_SETTINGS ? idx : MAX_NUM_SETTINGS - 1; } -/* phy_sanitize_settings +/** + * phy_sanitize_settings - make sure the PHY is set to supported speed and duplex + * @phydev: the target phy_device struct * - * description: Make sure the PHY is set to supported speeds and + * Description: Make sure the PHY is set to supported speeds and * duplexes. Drop down by one in this order: 1000/FULL, - * 1000/HALF, 100/FULL, 100/HALF, 10/FULL, 10/HALF + * 1000/HALF, 100/FULL, 100/HALF, 10/FULL, 10/HALF. */ void phy_sanitize_settings(struct phy_device *phydev) { @@ -232,16 +271,17 @@ void phy_sanitize_settings(struct phy_device *phydev) } EXPORT_SYMBOL(phy_sanitize_settings); -/* phy_ethtool_sset: - * A generic ethtool sset function. Handles all the details +/** + * phy_ethtool_sset - generic ethtool sset function, handles all the details + * @phydev: target phy_device struct + * @cmd: ethtool_cmd * * A few notes about parameter checking: * - We don't set port or transceiver, so we don't care what they * were set to. * - phy_start_aneg() will make sure forced settings are sane, and * choose the next best ones from the ones selected, so we don't - * care if ethtool tries to give us bad values - * + * care if ethtool tries to give us bad values. */ int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd) { @@ -304,9 +344,15 @@ int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd) } EXPORT_SYMBOL(phy_ethtool_gset); -/* Note that this function is currently incompatible with the +/** + * phy_mii_ioctl - generic PHY MII ioctl interface + * @phydev: the phy_device struct + * @mii_data: MII ioctl data + * @cmd: ioctl cmd to execute + * + * Note that this function is currently incompatible with the * PHYCONTROL layer. It changes registers without regard to - * current state. Use at own risk + * current state. Use at own risk. */ int phy_mii_ioctl(struct phy_device *phydev, struct mii_ioctl_data *mii_data, int cmd) @@ -336,6 +382,12 @@ int phy_mii_ioctl(struct phy_device *phydev, phydev->duplex = DUPLEX_FULL; else phydev->duplex = DUPLEX_HALF; + if ((!phydev->autoneg) && + (val & BMCR_SPEED1000)) + phydev->speed = SPEED_1000; + else if ((!phydev->autoneg) && + (val & BMCR_SPEED100)) + phydev->speed = SPEED_100; break; case MII_ADVERTISE: phydev->advertising = val; @@ -358,13 +410,14 @@ int phy_mii_ioctl(struct phy_device *phydev, return 0; } -/* phy_start_aneg +/** + * phy_start_aneg - start auto-negotiation for this PHY device + * @phydev: the phy_device struct * - * description: Sanitizes the settings (if we're not - * autonegotiating them), and then calls the driver's - * config_aneg function. If the PHYCONTROL Layer is operating, - * we change the state to reflect the beginning of - * Auto-negotiation or forcing. + * Description: Sanitizes the settings (if we're not autonegotiating + * them), and then calls the driver's config_aneg function. + * If the PHYCONTROL Layer is operating, we change the state to + * reflect the beginning of Auto-negotiation or forcing. */ int phy_start_aneg(struct phy_device *phydev) { @@ -400,15 +453,19 @@ EXPORT_SYMBOL(phy_start_aneg); static void phy_change(struct work_struct *work); static void phy_timer(unsigned long data); -/* phy_start_machine: +/** + * phy_start_machine - start PHY state machine tracking + * @phydev: the phy_device struct + * @handler: callback function for state change notifications * - * description: The PHY infrastructure can run a state machine + * Description: The PHY infrastructure can run a state machine * which tracks whether the PHY is starting up, negotiating, * etc. This function starts the timer which tracks the state - * of the PHY. If you want to be notified when the state - * changes, pass in the callback, otherwise, pass NULL. If you + * of the PHY. If you want to be notified when the state changes, + * pass in the callback @handler, otherwise, pass NULL. If you * want to maintain your own state machine, do not call this - * function. */ + * function. + */ void phy_start_machine(struct phy_device *phydev, void (*handler)(struct net_device *)) { @@ -420,9 +477,11 @@ void phy_start_machine(struct phy_device *phydev, mod_timer(&phydev->phy_timer, jiffies + HZ); } -/* phy_stop_machine +/** + * phy_stop_machine - stop the PHY state machine tracking + * @phydev: target phy_device struct * - * description: Stops the state machine timer, sets the state to UP + * Description: Stops the state machine timer, sets the state to UP * (unless it wasn't up yet). This function must be called BEFORE * phy_detach. */ @@ -438,12 +497,14 @@ void phy_stop_machine(struct phy_device *phydev) phydev->adjust_state = NULL; } -/* phy_force_reduction +/** + * phy_force_reduction - reduce PHY speed/duplex settings by one step + * @phydev: target phy_device struct * - * description: Reduces the speed/duplex settings by - * one notch. The order is so: - * 1000/FULL, 1000/HALF, 100/FULL, 100/HALF, - * 10/FULL, 10/HALF. The function bottoms out at 10/HALF. + * Description: Reduces the speed/duplex settings by one notch, + * in this order-- + * 1000/FULL, 1000/HALF, 100/FULL, 100/HALF, 10/FULL, 10/HALF. + * The function bottoms out at 10/HALF. */ static void phy_force_reduction(struct phy_device *phydev) { @@ -464,7 +525,9 @@ static void phy_force_reduction(struct phy_device *phydev) } -/* phy_error: +/** + * phy_error - enter HALTED state for this PHY device + * @phydev: target phy_device struct * * Moves the PHY to the HALTED state in response to a read * or write error, and tells the controller the link is down. @@ -478,9 +541,12 @@ void phy_error(struct phy_device *phydev) spin_unlock(&phydev->lock); } -/* phy_interrupt +/** + * phy_interrupt - PHY interrupt handler + * @irq: interrupt line + * @phy_dat: phy_device pointer * - * description: When a PHY interrupt occurs, the handler disables + * Description: When a PHY interrupt occurs, the handler disables * interrupts, and schedules a work task to clear the interrupt. */ static irqreturn_t phy_interrupt(int irq, void *phy_dat) @@ -501,7 +567,10 @@ static irqreturn_t phy_interrupt(int irq, void *phy_dat) return IRQ_HANDLED; } -/* Enable the interrupts from the PHY side */ +/** + * phy_enable_interrupts - Enable the interrupts from the PHY side + * @phydev: target phy_device struct + */ int phy_enable_interrupts(struct phy_device *phydev) { int err; @@ -517,7 +586,10 @@ int phy_enable_interrupts(struct phy_device *phydev) } EXPORT_SYMBOL(phy_enable_interrupts); -/* Disable the PHY interrupts from the PHY side */ +/** + * phy_disable_interrupts - Disable the PHY interrupts from the PHY side + * @phydev: target phy_device struct + */ int phy_disable_interrupts(struct phy_device *phydev) { int err; @@ -543,13 +615,15 @@ phy_err: } EXPORT_SYMBOL(phy_disable_interrupts); -/* phy_start_interrupts +/** + * phy_start_interrupts - request and enable interrupts for a PHY device + * @phydev: target phy_device struct * - * description: Request the interrupt for the given PHY. If - * this fails, then we set irq to PHY_POLL. + * Description: Request the interrupt for the given PHY. + * If this fails, then we set irq to PHY_POLL. * Otherwise, we enable the interrupts in the PHY. - * Returns 0 on success. * This should only be called with a valid IRQ number. + * Returns 0 on success or < 0 on error. */ int phy_start_interrupts(struct phy_device *phydev) { @@ -574,6 +648,10 @@ int phy_start_interrupts(struct phy_device *phydev) } EXPORT_SYMBOL(phy_start_interrupts); +/** + * phy_stop_interrupts - disable interrupts from a PHY device + * @phydev: target phy_device struct + */ int phy_stop_interrupts(struct phy_device *phydev) { int err; @@ -596,7 +674,10 @@ int phy_stop_interrupts(struct phy_device *phydev) EXPORT_SYMBOL(phy_stop_interrupts); -/* Scheduled by the phy_interrupt/timer to handle PHY changes */ +/** + * phy_change - Scheduled by the phy_interrupt/timer to handle PHY changes + * @work: work_struct that describes the work to be done + */ static void phy_change(struct work_struct *work) { int err; @@ -630,7 +711,10 @@ phy_err: phy_error(phydev); } -/* Bring down the PHY link, and stop checking the status. */ +/** + * phy_stop - Bring down the PHY link, and stop checking the status + * @phydev: target phy_device struct + */ void phy_stop(struct phy_device *phydev) { spin_lock(&phydev->lock); @@ -659,9 +743,11 @@ out_unlock: } -/* phy_start +/** + * phy_start - start or restart a PHY device + * @phydev: target phy_device struct * - * description: Indicates the attached device's readiness to + * Description: Indicates the attached device's readiness to * handle PHY-related work. Used during startup to start the * PHY, and after a call to phy_stop() to resume operation. * Also used to indicate the MDIO bus has cleared an error |