diff options
Diffstat (limited to 'drivers/net/phy/realtek.c')
| -rw-r--r-- | drivers/net/phy/realtek.c | 47 |
1 files changed, 28 insertions, 19 deletions
diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c index 0f0960971800..fb1db713b7fb 100644 --- a/drivers/net/phy/realtek.c +++ b/drivers/net/phy/realtek.c @@ -26,11 +26,16 @@ #define RTL821x_EXT_PAGE_SELECT 0x1e #define RTL821x_PAGE_SELECT 0x1f +#define RTL8211F_PHYCR1 0x18 #define RTL8211F_INSR 0x1d #define RTL8211F_TX_DELAY BIT(8) #define RTL8211F_RX_DELAY BIT(3) +#define RTL8211F_ALDPS_PLL_OFF BIT(1) +#define RTL8211F_ALDPS_ENABLE BIT(2) +#define RTL8211F_ALDPS_XTAL_OFF BIT(12) + #define RTL8211E_CTRL_DELAY BIT(13) #define RTL8211E_TX_DELAY BIT(12) #define RTL8211E_RX_DELAY BIT(11) @@ -177,8 +182,12 @@ static int rtl8211f_config_init(struct phy_device *phydev) { struct device *dev = &phydev->mdio.dev; u16 val_txdly, val_rxdly; + u16 val; int ret; + val = RTL8211F_ALDPS_ENABLE | RTL8211F_ALDPS_PLL_OFF | RTL8211F_ALDPS_XTAL_OFF; + phy_modify_paged_changed(phydev, 0xa43, RTL8211F_PHYCR1, val, val); + switch (phydev->interface) { case PHY_INTERFACE_MODE_RGMII: val_txdly = 0; @@ -401,7 +410,7 @@ static int rtlgen_write_mmd(struct phy_device *phydev, int devnum, u16 regnum, return ret; } -static int rtl8125_read_mmd(struct phy_device *phydev, int devnum, u16 regnum) +static int rtl822x_read_mmd(struct phy_device *phydev, int devnum, u16 regnum) { int ret = rtlgen_read_mmd(phydev, devnum, regnum); @@ -425,7 +434,7 @@ static int rtl8125_read_mmd(struct phy_device *phydev, int devnum, u16 regnum) return ret; } -static int rtl8125_write_mmd(struct phy_device *phydev, int devnum, u16 regnum, +static int rtl822x_write_mmd(struct phy_device *phydev, int devnum, u16 regnum, u16 val) { int ret = rtlgen_write_mmd(phydev, devnum, regnum, val); @@ -442,7 +451,7 @@ static int rtl8125_write_mmd(struct phy_device *phydev, int devnum, u16 regnum, return ret; } -static int rtl8125_get_features(struct phy_device *phydev) +static int rtl822x_get_features(struct phy_device *phydev) { int val; @@ -460,7 +469,7 @@ static int rtl8125_get_features(struct phy_device *phydev) return genphy_read_abilities(phydev); } -static int rtl8125_config_aneg(struct phy_device *phydev) +static int rtl822x_config_aneg(struct phy_device *phydev) { int ret = 0; @@ -480,7 +489,7 @@ static int rtl8125_config_aneg(struct phy_device *phydev) return __genphy_config_aneg(phydev, ret); } -static int rtl8125_read_status(struct phy_device *phydev) +static int rtl822x_read_status(struct phy_device *phydev) { int ret; @@ -522,7 +531,7 @@ static int rtlgen_match_phy_device(struct phy_device *phydev) !rtlgen_supports_2_5gbps(phydev); } -static int rtl8125_match_phy_device(struct phy_device *phydev) +static int rtl8226_match_phy_device(struct phy_device *phydev) { return phydev->phy_id == RTL_GENERIC_PHYID && rtlgen_supports_2_5gbps(phydev); @@ -627,29 +636,29 @@ static struct phy_driver realtek_drvs[] = { .read_mmd = rtlgen_read_mmd, .write_mmd = rtlgen_write_mmd, }, { - .name = "RTL8125 2.5Gbps internal", - .match_phy_device = rtl8125_match_phy_device, - .get_features = rtl8125_get_features, - .config_aneg = rtl8125_config_aneg, - .read_status = rtl8125_read_status, + .name = "RTL8226 2.5Gbps PHY", + .match_phy_device = rtl8226_match_phy_device, + .get_features = rtl822x_get_features, + .config_aneg = rtl822x_config_aneg, + .read_status = rtl822x_read_status, .suspend = genphy_suspend, .resume = rtlgen_resume, .read_page = rtl821x_read_page, .write_page = rtl821x_write_page, - .read_mmd = rtl8125_read_mmd, - .write_mmd = rtl8125_write_mmd, + .read_mmd = rtl822x_read_mmd, + .write_mmd = rtl822x_write_mmd, }, { PHY_ID_MATCH_EXACT(0x001cc840), - .name = "RTL8125B 2.5Gbps internal", - .get_features = rtl8125_get_features, - .config_aneg = rtl8125_config_aneg, - .read_status = rtl8125_read_status, + .name = "RTL8226B_RTL8221B 2.5Gbps PHY", + .get_features = rtl822x_get_features, + .config_aneg = rtl822x_config_aneg, + .read_status = rtl822x_read_status, .suspend = genphy_suspend, .resume = rtlgen_resume, .read_page = rtl821x_read_page, .write_page = rtl821x_write_page, - .read_mmd = rtl8125_read_mmd, - .write_mmd = rtl8125_write_mmd, + .read_mmd = rtl822x_read_mmd, + .write_mmd = rtl822x_write_mmd, }, { PHY_ID_MATCH_EXACT(0x001cc961), .name = "RTL8366RB Gigabit Ethernet", |