summaryrefslogtreecommitdiffstats
path: root/drivers/net/phy
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/phy')
-rw-r--r--drivers/net/phy/Kconfig6
-rw-r--r--drivers/net/phy/aquantia_main.c382
-rw-r--r--drivers/net/phy/at803x.c26
-rw-r--r--drivers/net/phy/bcm-cygnus.c147
-rw-r--r--drivers/net/phy/bcm-phy-lib.c52
-rw-r--r--drivers/net/phy/bcm-phy-lib.h20
-rw-r--r--drivers/net/phy/bcm7xxx.c76
-rw-r--r--drivers/net/phy/marvell.c108
-rw-r--r--drivers/net/phy/mdio-bcm-unimac.c7
-rw-r--r--drivers/net/phy/phy.c8
-rw-r--r--drivers/net/phy/rockchip.c31
11 files changed, 690 insertions, 173 deletions
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 520657945b82..1c66e92c717c 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -273,13 +273,13 @@ config BCM87XX_PHY
Currently supports the BCM8706 and BCM8727 10G Ethernet PHYs.
config BCM_CYGNUS_PHY
- tristate "Broadcom Cygnus SoC internal PHY"
- depends on ARCH_BCM_CYGNUS || COMPILE_TEST
+ tristate "Broadcom Cygnus/Omega SoC internal PHY"
+ depends on ARCH_BCM_IPROC || COMPILE_TEST
depends on MDIO_BCM_IPROC
select BCM_NET_PHYLIB
---help---
This PHY driver is for the 1G internal PHYs of the Broadcom
- Cygnus Family SoC.
+ Cygnus and Omega Family SoC.
Currently supports internal PHY's used in the BCM11300,
BCM11320, BCM11350, BCM11360, BCM58300, BCM58302,
diff --git a/drivers/net/phy/aquantia_main.c b/drivers/net/phy/aquantia_main.c
index 37218e5d7cc9..ae6a76d3f2fe 100644
--- a/drivers/net/phy/aquantia_main.c
+++ b/drivers/net/phy/aquantia_main.c
@@ -10,6 +10,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/delay.h>
+#include <linux/bitfield.h>
#include <linux/phy.h>
#include "aquantia.h"
@@ -22,20 +23,33 @@
#define PHY_ID_AQCS109 0x03a1b5c2
#define PHY_ID_AQR405 0x03a1b4b0
+#define MDIO_PHYXS_VEND_IF_STATUS 0xe812
+#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_MASK GENMASK(7, 3)
+#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_KR 0
+#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_XFI 2
+#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_SGMII 6
+#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_OCSGMII 10
+
#define MDIO_AN_VEND_PROV 0xc400
#define MDIO_AN_VEND_PROV_1000BASET_FULL BIT(15)
#define MDIO_AN_VEND_PROV_1000BASET_HALF BIT(14)
+#define MDIO_AN_VEND_PROV_DOWNSHIFT_EN BIT(4)
+#define MDIO_AN_VEND_PROV_DOWNSHIFT_MASK GENMASK(3, 0)
+#define MDIO_AN_VEND_PROV_DOWNSHIFT_DFLT 4
#define MDIO_AN_TX_VEND_STATUS1 0xc800
-#define MDIO_AN_TX_VEND_STATUS1_10BASET (0x0 << 1)
-#define MDIO_AN_TX_VEND_STATUS1_100BASETX (0x1 << 1)
-#define MDIO_AN_TX_VEND_STATUS1_1000BASET (0x2 << 1)
-#define MDIO_AN_TX_VEND_STATUS1_10GBASET (0x3 << 1)
-#define MDIO_AN_TX_VEND_STATUS1_2500BASET (0x4 << 1)
-#define MDIO_AN_TX_VEND_STATUS1_5000BASET (0x5 << 1)
-#define MDIO_AN_TX_VEND_STATUS1_RATE_MASK (0x7 << 1)
+#define MDIO_AN_TX_VEND_STATUS1_RATE_MASK GENMASK(3, 1)
+#define MDIO_AN_TX_VEND_STATUS1_10BASET 0
+#define MDIO_AN_TX_VEND_STATUS1_100BASETX 1
+#define MDIO_AN_TX_VEND_STATUS1_1000BASET 2
+#define MDIO_AN_TX_VEND_STATUS1_10GBASET 3
+#define MDIO_AN_TX_VEND_STATUS1_2500BASET 4
+#define MDIO_AN_TX_VEND_STATUS1_5000BASET 5
#define MDIO_AN_TX_VEND_STATUS1_FULL_DUPLEX BIT(0)
+#define MDIO_AN_TX_VEND_INT_STATUS1 0xcc00
+#define MDIO_AN_TX_VEND_INT_STATUS1_DOWNSHIFT BIT(1)
+
#define MDIO_AN_TX_VEND_INT_STATUS2 0xcc01
#define MDIO_AN_TX_VEND_INT_MASK2 0xd401
@@ -44,8 +58,30 @@
#define MDIO_AN_RX_LP_STAT1 0xe820
#define MDIO_AN_RX_LP_STAT1_1000BASET_FULL BIT(15)
#define MDIO_AN_RX_LP_STAT1_1000BASET_HALF BIT(14)
+#define MDIO_AN_RX_LP_STAT1_SHORT_REACH BIT(13)
+#define MDIO_AN_RX_LP_STAT1_AQRATE_DOWNSHIFT BIT(12)
+#define MDIO_AN_RX_LP_STAT1_AQ_PHY BIT(2)
+
+#define MDIO_AN_RX_LP_STAT4 0xe823
+#define MDIO_AN_RX_LP_STAT4_FW_MAJOR GENMASK(15, 8)
+#define MDIO_AN_RX_LP_STAT4_FW_MINOR GENMASK(7, 0)
+
+#define MDIO_AN_RX_VEND_STAT3 0xe832
+#define MDIO_AN_RX_VEND_STAT3_AFR BIT(0)
/* Vendor specific 1, MDIO_MMD_VEND1 */
+#define VEND1_GLOBAL_FW_ID 0x0020
+#define VEND1_GLOBAL_FW_ID_MAJOR GENMASK(15, 8)
+#define VEND1_GLOBAL_FW_ID_MINOR GENMASK(7, 0)
+
+#define VEND1_GLOBAL_RSVD_STAT1 0xc885
+#define VEND1_GLOBAL_RSVD_STAT1_FW_BUILD_ID GENMASK(7, 4)
+#define VEND1_GLOBAL_RSVD_STAT1_PROV_ID GENMASK(3, 0)
+
+#define VEND1_GLOBAL_RSVD_STAT9 0xc88d
+#define VEND1_GLOBAL_RSVD_STAT9_MODE GENMASK(7, 0)
+#define VEND1_GLOBAL_RSVD_STAT9_1000BT2 0x23
+
#define VEND1_GLOBAL_INT_STD_STATUS 0xfc00
#define VEND1_GLOBAL_INT_VEND_STATUS 0xfc01
@@ -112,41 +148,22 @@ static int aqr_config_aneg(struct phy_device *phydev)
static int aqr_config_intr(struct phy_device *phydev)
{
+ bool en = phydev->interrupts == PHY_INTERRUPT_ENABLED;
int err;
- if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
- err = phy_write_mmd(phydev, MDIO_MMD_AN,
- MDIO_AN_TX_VEND_INT_MASK2,
- MDIO_AN_TX_VEND_INT_MASK2_LINK);
- if (err < 0)
- return err;
-
- err = phy_write_mmd(phydev, MDIO_MMD_VEND1,
- VEND1_GLOBAL_INT_STD_MASK,
- VEND1_GLOBAL_INT_STD_MASK_ALL);
- if (err < 0)
- return err;
-
- err = phy_write_mmd(phydev, MDIO_MMD_VEND1,
- VEND1_GLOBAL_INT_VEND_MASK,
- VEND1_GLOBAL_INT_VEND_MASK_GLOBAL3 |
- VEND1_GLOBAL_INT_VEND_MASK_AN);
- } else {
- err = phy_write_mmd(phydev, MDIO_MMD_AN,
- MDIO_AN_TX_VEND_INT_MASK2, 0);
- if (err < 0)
- return err;
-
- err = phy_write_mmd(phydev, MDIO_MMD_VEND1,
- VEND1_GLOBAL_INT_STD_MASK, 0);
- if (err < 0)
- return err;
-
- err = phy_write_mmd(phydev, MDIO_MMD_VEND1,
- VEND1_GLOBAL_INT_VEND_MASK, 0);
- }
+ err = phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_TX_VEND_INT_MASK2,
+ en ? MDIO_AN_TX_VEND_INT_MASK2_LINK : 0);
+ if (err < 0)
+ return err;
+
+ err = phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_INT_STD_MASK,
+ en ? VEND1_GLOBAL_INT_STD_MASK_ALL : 0);
+ if (err < 0)
+ return err;
- return err;
+ return phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_INT_VEND_MASK,
+ en ? VEND1_GLOBAL_INT_VEND_MASK_GLOBAL3 |
+ VEND1_GLOBAL_INT_VEND_MASK_AN : 0);
}
static int aqr_ack_interrupt(struct phy_device *phydev)
@@ -178,13 +195,287 @@ static int aqr_read_status(struct phy_device *phydev)
return genphy_c45_read_status(phydev);
}
+static int aqr107_read_downshift_event(struct phy_device *phydev)
+{
+ int val;
+
+ val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_TX_VEND_INT_STATUS1);
+ if (val < 0)
+ return val;
+
+ return !!(val & MDIO_AN_TX_VEND_INT_STATUS1_DOWNSHIFT);
+}
+
+static int aqr107_read_rate(struct phy_device *phydev)
+{
+ int val;
+
+ val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_TX_VEND_STATUS1);
+ if (val < 0)
+ return val;
+
+ switch (FIELD_GET(MDIO_AN_TX_VEND_STATUS1_RATE_MASK, val)) {
+ case MDIO_AN_TX_VEND_STATUS1_10BASET:
+ phydev->speed = SPEED_10;
+ break;
+ case MDIO_AN_TX_VEND_STATUS1_100BASETX:
+ phydev->speed = SPEED_100;
+ break;
+ case MDIO_AN_TX_VEND_STATUS1_1000BASET:
+ phydev->speed = SPEED_1000;
+ break;
+ case MDIO_AN_TX_VEND_STATUS1_2500BASET:
+ phydev->speed = SPEED_2500;
+ break;
+ case MDIO_AN_TX_VEND_STATUS1_5000BASET:
+ phydev->speed = SPEED_5000;
+ break;
+ case MDIO_AN_TX_VEND_STATUS1_10GBASET:
+ phydev->speed = SPEED_10000;
+ break;
+ default:
+ phydev->speed = SPEED_UNKNOWN;
+ break;
+ }
+
+ if (val & MDIO_AN_TX_VEND_STATUS1_FULL_DUPLEX)
+ phydev->duplex = DUPLEX_FULL;
+ else
+ phydev->duplex = DUPLEX_HALF;
+
+ return 0;
+}
+
+static int aqr107_read_status(struct phy_device *phydev)
+{
+ int val, ret;
+
+ ret = aqr_read_status(phydev);
+ if (ret)
+ return ret;
+
+ if (!phydev->link || phydev->autoneg == AUTONEG_DISABLE)
+ return 0;
+
+ val = phy_read_mmd(phydev, MDIO_MMD_PHYXS, MDIO_PHYXS_VEND_IF_STATUS);
+ if (val < 0)
+ return val;
+
+ switch (FIELD_GET(MDIO_PHYXS_VEND_IF_STATUS_TYPE_MASK, val)) {
+ case MDIO_PHYXS_VEND_IF_STATUS_TYPE_KR:
+ case MDIO_PHYXS_VEND_IF_STATUS_TYPE_XFI:
+ phydev->interface = PHY_INTERFACE_MODE_10GKR;
+ break;
+ case MDIO_PHYXS_VEND_IF_STATUS_TYPE_SGMII:
+ phydev->interface = PHY_INTERFACE_MODE_SGMII;
+ break;
+ case MDIO_PHYXS_VEND_IF_STATUS_TYPE_OCSGMII:
+ phydev->interface = PHY_INTERFACE_MODE_2500BASEX;
+ break;
+ default:
+ phydev->interface = PHY_INTERFACE_MODE_NA;
+ break;
+ }
+
+ val = aqr107_read_downshift_event(phydev);
+ if (val <= 0)
+ return val;
+
+ phydev_warn(phydev, "Downshift occurred! Cabling may be defective.\n");
+
+ /* Read downshifted rate from vendor register */
+ return aqr107_read_rate(phydev);
+}
+
+static int aqr107_get_downshift(struct phy_device *phydev, u8 *data)
+{
+ int val, cnt, enable;
+
+ val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_VEND_PROV);
+ if (val < 0)
+ return val;
+
+ enable = FIELD_GET(MDIO_AN_VEND_PROV_DOWNSHIFT_EN, val);
+ cnt = FIELD_GET(MDIO_AN_VEND_PROV_DOWNSHIFT_MASK, val);
+
+ *data = enable && cnt ? cnt : DOWNSHIFT_DEV_DISABLE;
+
+ return 0;
+}
+
+static int aqr107_set_downshift(struct phy_device *phydev, u8 cnt)
+{
+ int val = 0;
+
+ if (!FIELD_FIT(MDIO_AN_VEND_PROV_DOWNSHIFT_MASK, cnt))
+ return -E2BIG;
+
+ if (cnt != DOWNSHIFT_DEV_DISABLE) {
+ val = MDIO_AN_VEND_PROV_DOWNSHIFT_EN;
+ val |= FIELD_PREP(MDIO_AN_VEND_PROV_DOWNSHIFT_MASK, cnt);
+ }
+
+ return phy_modify_mmd(phydev, MDIO_MMD_AN, MDIO_AN_VEND_PROV,
+ MDIO_AN_VEND_PROV_DOWNSHIFT_EN |
+ MDIO_AN_VEND_PROV_DOWNSHIFT_MASK, val);
+}
+
+static int aqr107_get_tunable(struct phy_device *phydev,
+ struct ethtool_tunable *tuna, void *data)
+{
+ switch (tuna->id) {
+ case ETHTOOL_PHY_DOWNSHIFT:
+ return aqr107_get_downshift(phydev, data);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static int aqr107_set_tunable(struct phy_device *phydev,
+ struct ethtool_tunable *tuna, const void *data)
+{
+ switch (tuna->id) {
+ case ETHTOOL_PHY_DOWNSHIFT:
+ return aqr107_set_downshift(phydev, *(const u8 *)data);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+/* If we configure settings whilst firmware is still initializing the chip,
+ * then these settings may be overwritten. Therefore make sure chip
+ * initialization has completed. Use presence of the firmware ID as
+ * indicator for initialization having completed.
+ * The chip also provides a "reset completed" bit, but it's cleared after
+ * read. Therefore function would time out if called again.
+ */
+static int aqr107_wait_reset_complete(struct phy_device *phydev)
+{
+ int val, retries = 100;
+
+ do {
+ val = phy_read_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_FW_ID);
+ if (val < 0)
+ return val;
+ msleep(20);
+ } while (!val && --retries);
+
+ return val ? 0 : -ETIMEDOUT;
+}
+
+static void aqr107_chip_info(struct phy_device *phydev)
+{
+ u8 fw_major, fw_minor, build_id, prov_id;
+ int val;
+
+ val = phy_read_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_FW_ID);
+ if (val < 0)
+ return;
+
+ fw_major = FIELD_GET(VEND1_GLOBAL_FW_ID_MAJOR, val);
+ fw_minor = FIELD_GET(VEND1_GLOBAL_FW_ID_MINOR, val);
+
+ val = phy_read_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_RSVD_STAT1);
+ if (val < 0)
+ return;
+
+ build_id = FIELD_GET(VEND1_GLOBAL_RSVD_STAT1_FW_BUILD_ID, val);
+ prov_id = FIELD_GET(VEND1_GLOBAL_RSVD_STAT1_PROV_ID, val);
+
+ phydev_dbg(phydev, "FW %u.%u, Build %u, Provisioning %u\n",
+ fw_major, fw_minor, build_id, prov_id);
+}
+
+static int aqr107_config_init(struct phy_device *phydev)
+{
+ int ret;
+
+ /* Check that the PHY interface type is compatible */
+ if (phydev->interface != PHY_INTERFACE_MODE_SGMII &&
+ phydev->interface != PHY_INTERFACE_MODE_2500BASEX &&
+ phydev->interface != PHY_INTERFACE_MODE_10GKR)
+ return -ENODEV;
+
+ ret = aqr107_wait_reset_complete(phydev);
+ if (!ret)
+ aqr107_chip_info(phydev);
+
+ /* ensure that a latched downshift event is cleared */
+ aqr107_read_downshift_event(phydev);
+
+ return aqr107_set_downshift(phydev, MDIO_AN_VEND_PROV_DOWNSHIFT_DFLT);
+}
+
static int aqcs109_config_init(struct phy_device *phydev)
{
+ int ret;
+
+ /* Check that the PHY interface type is compatible */
+ if (phydev->interface != PHY_INTERFACE_MODE_SGMII &&
+ phydev->interface != PHY_INTERFACE_MODE_2500BASEX)
+ return -ENODEV;
+
+ ret = aqr107_wait_reset_complete(phydev);
+ if (!ret)
+ aqr107_chip_info(phydev);
+
/* AQCS109 belongs to a chip family partially supporting 10G and 5G.
* PMA speed ability bits are the same for all members of the family,
* AQCS109 however supports speeds up to 2.5G only.
*/
- return phy_set_max_speed(phydev, SPEED_2500);
+ ret = phy_set_max_speed(phydev, SPEED_2500);
+ if (ret)
+ return ret;
+
+ /* ensure that a latched downshift event is cleared */
+ aqr107_read_downshift_event(phydev);
+
+ return aqr107_set_downshift(phydev, MDIO_AN_VEND_PROV_DOWNSHIFT_DFLT);
+}
+
+static void aqr107_link_change_notify(struct phy_device *phydev)
+{
+ u8 fw_major, fw_minor;
+ bool downshift, short_reach, afr;
+ int mode, val;
+
+ if (phydev->state != PHY_RUNNING || phydev->autoneg == AUTONEG_DISABLE)
+ return;
+
+ val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_RX_LP_STAT1);
+ /* call failed or link partner is no Aquantia PHY */
+ if (val < 0 || !(val & MDIO_AN_RX_LP_STAT1_AQ_PHY))
+ return;
+
+ short_reach = val & MDIO_AN_RX_LP_STAT1_SHORT_REACH;
+ downshift = val & MDIO_AN_RX_LP_STAT1_AQRATE_DOWNSHIFT;
+
+ val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_RX_LP_STAT4);
+ if (val < 0)
+ return;
+
+ fw_major = FIELD_GET(MDIO_AN_RX_LP_STAT4_FW_MAJOR, val);
+ fw_minor = FIELD_GET(MDIO_AN_RX_LP_STAT4_FW_MINOR, val);
+
+ val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_RX_VEND_STAT3);
+ if (val < 0)
+ return;
+
+ afr = val & MDIO_AN_RX_VEND_STAT3_AFR;
+
+ phydev_dbg(phydev, "Link partner is Aquantia PHY, FW %u.%u%s%s%s\n",
+ fw_major, fw_minor,
+ short_reach ? ", short reach mode" : "",
+ downshift ? ", fast-retrain downshift advertised" : "",
+ afr ? ", fast reframe advertised" : "");
+
+ val = phy_read_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_RSVD_STAT9);
+ if (val < 0)
+ return;
+
+ mode = FIELD_GET(VEND1_GLOBAL_RSVD_STAT9_MODE, val);
+ if (mode == VEND1_GLOBAL_RSVD_STAT9_1000BT2)
+ phydev_info(phydev, "Aquantia 1000Base-T2 mode active\n");
}
static struct phy_driver aqr_driver[] = {
@@ -234,10 +525,14 @@ static struct phy_driver aqr_driver[] = {
.aneg_done = genphy_c45_aneg_done,
.get_features = genphy_c45_pma_read_abilities,
.probe = aqr_hwmon_probe,
+ .config_init = aqr107_config_init,
.config_aneg = aqr_config_aneg,
.config_intr = aqr_config_intr,
.ack_interrupt = aqr_ack_interrupt,
- .read_status = aqr_read_status,
+ .read_status = aqr107_read_status,
+ .get_tunable = aqr107_get_tunable,
+ .set_tunable = aqr107_set_tunable,
+ .link_change_notify = aqr107_link_change_notify,
},
{
PHY_ID_MATCH_MODEL(PHY_ID_AQCS109),
@@ -249,7 +544,10 @@ static struct phy_driver aqr_driver[] = {
.config_aneg = aqr_config_aneg,
.config_intr = aqr_config_intr,
.ack_interrupt = aqr_ack_interrupt,
- .read_status = aqr_read_status,
+ .read_status = aqr107_read_status,
+ .get_tunable = aqr107_get_tunable,
+ .set_tunable = aqr107_set_tunable,
+ .link_change_notify = aqr107_link_change_notify,
},
{
PHY_ID_MATCH_MODEL(PHY_ID_AQR405),
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index f3e96191eb6f..f315ab468a0d 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -324,8 +324,6 @@ static int at803x_config_intr(struct phy_device *phydev)
static void at803x_link_change_notify(struct phy_device *phydev)
{
- struct at803x_priv *priv = phydev->priv;
-
/*
* Conduct a hardware reset for AT8030 every time a link loss is
* signalled. This is necessary to circumvent a hardware bug that
@@ -333,25 +331,19 @@ static void at803x_link_change_notify(struct phy_device *phydev)
* in the FIFO. In such cases, the FIFO enters an error mode it
* cannot recover from by software.
*/
- if (phydev->state == PHY_NOLINK) {
- if (phydev->mdio.reset && !priv->phy_reset) {
- struct at803x_context context;
+ if (phydev->state == PHY_NOLINK && phydev->mdio.reset) {
+ struct at803x_context context;
- at803x_context_save(phydev, &context);
+ at803x_context_save(phydev, &context);
- phy_device_reset(phydev, 1);
- msleep(1);
- phy_device_reset(phydev, 0);
- msleep(1);
+ phy_device_reset(phydev, 1);
+ msleep(1);
+ phy_device_reset(phydev, 0);
+ msleep(1);
- at803x_context_restore(phydev, &context);
+ at803x_context_restore(phydev, &context);
- phydev_dbg(phydev, "%s(): phy was reset\n",
- __func__);
- priv->phy_reset = true;
- }
- } else {
- priv->phy_reset = false;
+ phydev_dbg(phydev, "%s(): phy was reset\n", __func__);
}
}
diff --git a/drivers/net/phy/bcm-cygnus.c b/drivers/net/phy/bcm-cygnus.c
index ab8e12922bf9..625b7cb76285 100644
--- a/drivers/net/phy/bcm-cygnus.c
+++ b/drivers/net/phy/bcm-cygnus.c
@@ -10,6 +10,10 @@
#include <linux/netdevice.h>
#include <linux/phy.h>
+struct bcm_omega_phy_priv {
+ u64 *stats;
+};
+
/* Broadcom Cygnus Phy specific registers */
#define MII_BCM_CYGNUS_AFE_VDAC_ICTRL_0 0x91E5 /* VDAL Control register */
@@ -121,6 +125,130 @@ static int bcm_cygnus_resume(struct phy_device *phydev)
return genphy_config_aneg(phydev);
}
+static int bcm_omega_config_init(struct phy_device *phydev)
+{
+ u8 count, rev;
+ int ret = 0;
+
+ rev = phydev->phy_id & ~phydev->drv->phy_id_mask;
+
+ pr_info_once("%s: %s PHY revision: 0x%02x\n",
+ phydev_name(phydev), phydev->drv->name, rev);
+
+ /* Dummy read to a register to workaround an issue upon reset where the
+ * internal inverter may not allow the first MDIO transaction to pass
+ * the MDIO management controller and make us return 0xffff for such
+ * reads.
+ */
+ phy_read(phydev, MII_BMSR);
+
+ switch (rev) {
+ case 0x00:
+ ret = bcm_phy_28nm_a0b0_afe_config_init(phydev);
+ break;
+ default:
+ break;
+ }
+
+ if (ret)
+ return ret;
+
+ ret = bcm_phy_downshift_get(phydev, &count);
+ if (ret)
+ return ret;
+
+ /* Only enable EEE if Wirespeed/downshift is disabled */
+ ret = bcm_phy_set_eee(phydev, count == DOWNSHIFT_DEV_DISABLE);
+ if (ret)
+ return ret;
+
+ return bcm_phy_enable_apd(phydev, true);
+}
+
+static int bcm_omega_resume(struct phy_device *phydev)
+{
+ int ret;
+
+ /* Re-apply workarounds coming out suspend/resume */
+ ret = bcm_omega_config_init(phydev);
+ if (ret)
+ return ret;
+
+ /* 28nm Gigabit PHYs come out of reset without any half-duplex
+ * or "hub" compliant advertised mode, fix that. This does not
+ * cause any problems with the PHY library since genphy_config_aneg()
+ * gracefully handles auto-negotiated and forced modes.
+ */
+ return genphy_config_aneg(phydev);
+}
+
+static int bcm_omega_get_tunable(struct phy_device *phydev,
+ struct ethtool_tunable *tuna, void *data)
+{
+ switch (tuna->id) {
+ case ETHTOOL_PHY_DOWNSHIFT:
+ return bcm_phy_downshift_get(phydev, (u8 *)data);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static int bcm_omega_set_tunable(struct phy_device *phydev,
+ struct ethtool_tunable *tuna,
+ const void *data)
+{
+ u8 count = *(u8 *)data;
+ int ret;
+
+ switch (tuna->id) {
+ case ETHTOOL_PHY_DOWNSHIFT:
+ ret = bcm_phy_downshift_set(phydev, count);
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ if (ret)
+ return ret;
+
+ /* Disable EEE advertisement since this prevents the PHY
+ * from successfully linking up, trigger auto-negotiation restart
+ * to let the MAC decide what to do.
+ */
+ ret = bcm_phy_set_eee(phydev, count == DOWNSHIFT_DEV_DISABLE);
+ if (ret)
+ return ret;
+
+ return genphy_restart_aneg(phydev);
+}
+
+static void bcm_omega_get_phy_stats(struct phy_device *phydev,
+ struct ethtool_stats *stats, u64 *data)
+{
+ struct bcm_omega_phy_priv *priv = phydev->priv;
+
+ bcm_phy_get_stats(phydev, priv->stats, stats, data);
+}
+
+static int bcm_omega_probe(struct phy_device *phydev)
+{
+ struct bcm_omega_phy_priv *priv;
+
+ priv = devm_kzalloc(&phydev->mdio.dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ phydev->priv = priv;
+
+ priv->stats = devm_kcalloc(&phydev->mdio.dev,
+ bcm_phy_get_sset_count(phydev), sizeof(u64),
+ GFP_KERNEL);
+ if (!priv->stats)
+ return -ENOMEM;
+
+ return 0;
+}
+
static struct phy_driver bcm_cygnus_phy_driver[] = {
{
.phy_id = PHY_ID_BCM_CYGNUS,
@@ -132,10 +260,27 @@ static struct phy_driver bcm_cygnus_phy_driver[] = {
.config_intr = bcm_phy_config_intr,
.suspend = genphy_suspend,
.resume = bcm_cygnus_resume,
-} };
+}, {
+ .phy_id = PHY_ID_BCM_OMEGA,
+ .phy_id_mask = 0xfffffff0,
+ .name = "Broadcom Omega Combo GPHY",
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_IS_INTERNAL,
+ .config_init = bcm_omega_config_init,
+ .suspend = genphy_suspend,
+ .resume = bcm_omega_resume,
+ .get_tunable = bcm_omega_get_tunable,
+ .set_tunable = bcm_omega_set_tunable,
+ .get_sset_count = bcm_phy_get_sset_count,
+ .get_strings = bcm_phy_get_strings,
+ .get_stats = bcm_omega_get_phy_stats,
+ .probe = bcm_omega_probe,
+}
+};
static struct mdio_device_id __maybe_unused bcm_cygnus_phy_tbl[] = {
{ PHY_ID_BCM_CYGNUS, 0xfffffff0, },
+ { PHY_ID_BCM_OMEGA, 0xfffffff0, },
{ }
};
MODULE_DEVICE_TABLE(mdio, bcm_cygnus_phy_tbl);
diff --git a/drivers/net/phy/bcm-phy-lib.c b/drivers/net/phy/bcm-phy-lib.c
index a75642051b8b..e0d3310957ff 100644
--- a/drivers/net/phy/bcm-phy-lib.c
+++ b/drivers/net/phy/bcm-phy-lib.c
@@ -371,6 +371,58 @@ void bcm_phy_get_stats(struct phy_device *phydev, u64 *shadow,
}
EXPORT_SYMBOL_GPL(bcm_phy_get_stats);
+void bcm_phy_r_rc_cal_reset(struct phy_device *phydev)
+{
+ /* Reset R_CAL/RC_CAL Engine */
+ bcm_phy_write_exp_sel(phydev, 0x00b0, 0x0010);
+
+ /* Disable Reset R_AL/RC_CAL Engine */
+ bcm_phy_write_exp_sel(phydev, 0x00b0, 0x0000);
+}
+EXPORT_SYMBOL_GPL(bcm_phy_r_rc_cal_reset);
+
+int bcm_phy_28nm_a0b0_afe_config_init(struct phy_device *phydev)
+{
+ /* Increase VCO range to prevent unlocking problem of PLL at low
+ * temp
+ */
+ bcm_phy_write_misc(phydev, PLL_PLLCTRL_1, 0x0048);
+
+ /* Change Ki to 011 */
+ bcm_phy_write_misc(phydev, PLL_PLLCTRL_2, 0x021b);
+
+ /* Disable loading of TVCO buffer to bandgap, set bandgap trim
+ * to 111
+ */
+ bcm_phy_write_misc(phydev, PLL_PLLCTRL_4, 0x0e20);
+
+ /* Adjust bias current trim by -3 */
+ bcm_phy_write_misc(phydev, DSP_TAP10, 0x690b);
+
+ /* Switch to CORE_BASE1E */
+ phy_write(phydev, MII_BRCM_CORE_BASE1E, 0xd);
+
+ bcm_phy_r_rc_cal_reset(phydev);
+
+ /* write AFE_RXCONFIG_0 */
+ bcm_phy_write_misc(phydev, AFE_RXCONFIG_0, 0xeb19);
+
+ /* write AFE_RXCONFIG_1 */
+ bcm_phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9a3f);
+
+ /* write AFE_RX_LP_COUNTER */
+ bcm_phy_write_misc(phydev, AFE_RX_LP_COUNTER, 0x7fc0);
+
+ /* write AFE_HPF_TRIM_OTHERS */
+ bcm_phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x000b);
+
+ /* write AFTE_TX_CONFIG */
+ bcm_phy_write_misc(phydev, AFE_TX_CONFIG, 0x0800);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(bcm_phy_28nm_a0b0_afe_config_init);
+
MODULE_DESCRIPTION("Broadcom PHY Library");
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Broadcom Corporation");
diff --git a/drivers/net/phy/bcm-phy-lib.h b/drivers/net/phy/bcm-phy-lib.h
index 17faaefcfd60..5ecacb4e64f0 100644
--- a/drivers/net/phy/bcm-phy-lib.h
+++ b/drivers/net/phy/bcm-phy-lib.h
@@ -9,6 +9,24 @@
#include <linux/brcmphy.h>
#include <linux/phy.h>
+/* 28nm only register definitions */
+#define MISC_ADDR(base, channel) base, channel
+
+#define DSP_TAP10 MISC_ADDR(0x0a, 0)
+#define PLL_PLLCTRL_1 MISC_ADDR(0x32, 1)
+#define PLL_PLLCTRL_2 MISC_ADDR(0x32, 2)
+#define PLL_PLLCTRL_4 MISC_ADDR(0x33, 0)
+
+#define AFE_RXCONFIG_0 MISC_ADDR(0x38, 0)
+#define AFE_RXCONFIG_1 MISC_ADDR(0x38, 1)
+#define AFE_RXCONFIG_2 MISC_ADDR(0x38, 2)
+#define AFE_RX_LP_COUNTER MISC_ADDR(0x38, 3)
+#define AFE_TX_CONFIG MISC_ADDR(0x39, 0)
+#define AFE_VDCA_ICTRL_0 MISC_ADDR(0x39, 1)
+#define AFE_VDAC_OTHERS_0 MISC_ADDR(0x39, 3)
+#define AFE_HPF_TRIM_OTHERS MISC_ADDR(0x3a, 0)
+
+
int bcm_phy_write_exp(struct phy_device *phydev, u16 reg, u16 val);
int bcm_phy_read_exp(struct phy_device *phydev, u16 reg);
@@ -45,5 +63,7 @@ int bcm_phy_get_sset_count(struct phy_device *phydev);
void bcm_phy_get_strings(struct phy_device *phydev, u8 *data);
void bcm_phy_get_stats(struct phy_device *phydev, u64 *shadow,
struct ethtool_stats *stats, u64 *data);
+void bcm_phy_r_rc_cal_reset(struct phy_device *phydev);
+int bcm_phy_28nm_a0b0_afe_config_init(struct phy_device *phydev);
#endif /* _LINUX_BCM_PHY_LIB_H */
diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c
index b8415f8fae14..a75e1b283541 100644
--- a/drivers/net/phy/bcm7xxx.c
+++ b/drivers/net/phy/bcm7xxx.c
@@ -37,77 +37,10 @@
#define MII_BCM7XXX_SHD_3_TL4 0x23
#define MII_BCM7XXX_TL4_RST_MSK (BIT(2) | BIT(1))
-/* 28nm only register definitions */
-#define MISC_ADDR(base, channel) base, channel
-
-#define DSP_TAP10 MISC_ADDR(0x0a, 0)
-#define PLL_PLLCTRL_1 MISC_ADDR(0x32, 1)
-#define PLL_PLLCTRL_2 MISC_ADDR(0x32, 2)
-#define PLL_PLLCTRL_4 MISC_ADDR(0x33, 0)
-
-#define AFE_RXCONFIG_0 MISC_ADDR(0x38, 0)
-#define AFE_RXCONFIG_1 MISC_ADDR(0x38, 1)
-#define AFE_RXCONFIG_2 MISC_ADDR(0x38, 2)
-#define AFE_RX_LP_COUNTER MISC_ADDR(0x38, 3)
-#define AFE_TX_CONFIG MISC_ADDR(0x39, 0)
-#define AFE_VDCA_ICTRL_0 MISC_ADDR(0x39, 1)
-#define AFE_VDAC_OTHERS_0 MISC_ADDR(0x39, 3)
-#define AFE_HPF_TRIM_OTHERS MISC_ADDR(0x3a, 0)
-
struct bcm7xxx_phy_priv {
u64 *stats;
};
-static void r_rc_cal_reset(struct phy_device *phydev)
-{
- /* Reset R_CAL/RC_CAL Engine */
- bcm_phy_write_exp_sel(phydev, 0x00b0, 0x0010);
-
- /* Disable Reset R_AL/RC_CAL Engine */
- bcm_phy_write_exp_sel(phydev, 0x00b0, 0x0000);
-}
-
-static int bcm7xxx_28nm_b0_afe_config_init(struct phy_device *phydev)
-{
- /* Increase VCO range to prevent unlocking problem of PLL at low
- * temp
- */
- bcm_phy_write_misc(phydev, PLL_PLLCTRL_1, 0x0048);
-
- /* Change Ki to 011 */
- bcm_phy_write_misc(phydev, PLL_PLLCTRL_2, 0x021b);
-
- /* Disable loading of TVCO buffer to bandgap, set bandgap trim
- * to 111
- */
- bcm_phy_write_misc(phydev, PLL_PLLCTRL_4, 0x0e20);
-
- /* Adjust bias current trim by -3 */
- bcm_phy_write_misc(phydev, DSP_TAP10, 0x690b);
-
- /* Switch to CORE_BASE1E */
- phy_write(phydev, MII_BRCM_CORE_BASE1E, 0xd);
-
- r_rc_cal_reset(phydev);
-
- /* write AFE_RXCONFIG_0 */
- bcm_phy_write_misc(phydev, AFE_RXCONFIG_0, 0xeb19);
-
- /* write AFE_RXCONFIG_1 */
- bcm_phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9a3f);
-
- /* write AFE_RX_LP_COUNTER */
- bcm_phy_write_misc(phydev, AFE_RX_LP_COUNTER, 0x7fc0);
-
- /* write AFE_HPF_TRIM_OTHERS */
- bcm_phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x000b);
-
- /* write AFTE_TX_CONFIG */
- bcm_phy_write_misc(phydev, AFE_TX_CONFIG, 0x0800);
-
- return 0;
-}
-
static int bcm7xxx_28nm_d0_afe_config_init(struct phy_device *phydev)
{
/* AFE_RXCONFIG_0 */
@@ -143,7 +76,7 @@ static int bcm7xxx_28nm_d0_afe_config_init(struct phy_device *phydev)
bcm_phy_write_misc(phydev, DSP_TAP10, 0x011b);
/* Reset R_CAL/RC_CAL engine */
- r_rc_cal_reset(phydev);
+ bcm_phy_r_rc_cal_reset(phydev);
return 0;
}
@@ -171,7 +104,7 @@ static int bcm7xxx_28nm_e0_plus_afe_config_init(struct phy_device *phydev)
bcm_phy_write_misc(phydev, DSP_TAP10, 0x011b);
/* Reset R_CAL/RC_CAL engine */
- r_rc_cal_reset(phydev);
+ bcm_phy_r_rc_cal_reset(phydev);
return 0;
}
@@ -196,7 +129,7 @@ static int bcm7xxx_28nm_a0_patch_afe_config_init(struct phy_device *phydev)
/* Enable ffe zero detection for Vitesse interoperability */
bcm_phy_write_misc(phydev, 0x26, 0x2, 0x0015);
- r_rc_cal_reset(phydev);
+ bcm_phy_r_rc_cal_reset(phydev);
return 0;
}
@@ -227,7 +160,7 @@ static int bcm7xxx_28nm_config_init(struct phy_device *phydev)
switch (rev) {
case 0xa0:
case 0xb0:
- ret = bcm7xxx_28nm_b0_afe_config_init(phydev);
+ ret = bcm_phy_28nm_a0b0_afe_config_init(phydev);
break;
case 0xd0:
ret = bcm7xxx_28nm_d0_afe_config_init(phydev);
@@ -657,7 +590,6 @@ static struct phy_driver bcm7xxx_driver[] = {
BCM7XXX_28NM_GPHY(PHY_ID_BCM7439, "Broadcom BCM7439"),
BCM7XXX_28NM_GPHY(PHY_ID_BCM7439_2, "Broadcom BCM7439 (2)"),
BCM7XXX_28NM_GPHY(PHY_ID_BCM7445, "Broadcom BCM7445"),
- BCM7XXX_28NM_GPHY(PHY_ID_BCM_OMEGA, "Broadcom Omega Combo GPHY"),
BCM7XXX_40NM_EPHY(PHY_ID_BCM7346, "Broadcom BCM7346"),
BCM7XXX_40NM_EPHY(PHY_ID_BCM7362, "Broadcom BCM7362"),
BCM7XXX_40NM_EPHY(PHY_ID_BCM7425, "Broadcom BCM7425"),
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 3ccba37bd6dd..65350186d514 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -29,6 +29,7 @@
#include <linux/ethtool.h>
#include <linux/phy.h>
#include <linux/marvell_phy.h>
+#include <linux/bitfield.h>
#include <linux/of.h>
#include <linux/io.h>
@@ -91,6 +92,14 @@
#define MII_88E1510_TEMP_SENSOR 0x1b
#define MII_88E1510_TEMP_SENSOR_MASK 0xff
+#define MII_88E1540_COPPER_CTRL3 0x1a
+#define MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_MASK GENMASK(11, 10)
+#define MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_00MS 0
+#define MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_10MS 1
+#define MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_20MS 2
+#define MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_40MS 3
+#define MII_88E1540_COPPER_CTRL3_FAST_LINK_DOWN BIT(9)
+
#define MII_88E6390_MISC_TEST 0x1b
#define MII_88E6390_MISC_TEST_SAMPLE_1S 0
#define MII_88E6390_MISC_TEST_SAMPLE_10MS BIT(14)
@@ -1025,6 +1034,101 @@ static int m88e1145_config_init(struct phy_device *phydev)
return 0;
}
+static int m88e1540_get_fld(struct phy_device *phydev, u8 *msecs)
+{
+ int val;
+
+ val = phy_read(phydev, MII_88E1540_COPPER_CTRL3);
+ if (val < 0)
+ return val;
+
+ if (!(val & MII_88E1540_COPPER_CTRL3_FAST_LINK_DOWN)) {
+ *msecs = ETHTOOL_PHY_FAST_LINK_DOWN_OFF;
+ return 0;
+ }
+
+ val = FIELD_GET(MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_MASK, val);
+
+ switch (val) {
+ case MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_00MS:
+ *msecs = 0;
+ break;
+ case MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_10MS:
+ *msecs = 10;
+ break;
+ case MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_20MS:
+ *msecs = 20;
+ break;
+ case MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_40MS:
+ *msecs = 40;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int m88e1540_set_fld(struct phy_device *phydev, const u8 *msecs)
+{
+ struct ethtool_eee eee;
+ int val, ret;
+
+ if (*msecs == ETHTOOL_PHY_FAST_LINK_DOWN_OFF)
+ return phy_clear_bits(phydev, MII_88E1540_COPPER_CTRL3,
+ MII_88E1540_COPPER_CTRL3_FAST_LINK_DOWN);
+
+ /* According to the Marvell data sheet EEE must be disabled for
+ * Fast Link Down detection to work properly
+ */
+ ret = phy_ethtool_get_eee(phydev, &eee);
+ if (!ret && eee.eee_enabled) {
+ phydev_warn(phydev, "Fast Link Down detection requires EEE to be disabled!\n");
+ return -EBUSY;
+ }
+
+ if (*msecs <= 5)
+ val = MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_00MS;
+ else if (*msecs <= 15)
+ val = MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_10MS;
+ else if (*msecs <= 30)
+ val = MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_20MS;
+ else
+ val = MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_40MS;
+
+ val = FIELD_PREP(MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_MASK, val);
+
+ ret = phy_modify(phydev, MII_88E1540_COPPER_CTRL3,
+ MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_MASK, val);
+ if (ret)
+ return ret;
+
+ return phy_set_bits(phydev, MII_88E1540_COPPER_CTRL3,
+ MII_88E1540_COPPER_CTRL3_FAST_LINK_DOWN);
+}
+
+static int m88e1540_get_tunable(struct phy_device *phydev,
+ struct ethtool_tunable *tuna, void *data)
+{
+ switch (tuna->id) {
+ case ETHTOOL_PHY_FAST_LINK_DOWN:
+ return m88e1540_get_fld(phydev, data);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static int m88e1540_set_tunable(struct phy_device *phydev,
+ struct ethtool_tunable *tuna, const void *data)
+{
+ switch (tuna->id) {
+ case ETHTOOL_PHY_FAST_LINK_DOWN:
+ return m88e1540_set_fld(phydev, data);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
/* The VOD can be out of specification on link up. Poke an
* undocumented register, in an undocumented page, with a magic value
* to fix this.
@@ -2247,6 +2351,8 @@ static struct phy_driver marvell_drivers[] = {
.get_sset_count = marvell_get_sset_count,
.get_strings = marvell_get_strings,
.get_stats = marvell_get_stats,
+ .get_tunable = m88e1540_get_tunable,
+ .set_tunable = m88e1540_set_tunable,
},
{
.phy_id = MARVELL_PHY_ID_88E1545,
@@ -2307,6 +2413,8 @@ static struct phy_driver marvell_drivers[] = {
.get_sset_count = marvell_get_sset_count,
.get_strings = marvell_get_strings,
.get_stats = marvell_get_stats,
+ .get_tunable = m88e1540_get_tunable,
+ .set_tunable = m88e1540_set_tunable,
},
};
diff --git a/drivers/net/phy/mdio-bcm-unimac.c b/drivers/net/phy/mdio-bcm-unimac.c
index 8295bc7c8c20..4a28fb29adaa 100644
--- a/drivers/net/phy/mdio-bcm-unimac.c
+++ b/drivers/net/phy/mdio-bcm-unimac.c
@@ -92,10 +92,7 @@ static int unimac_mdio_poll(void *wait_func_data)
usleep_range(1000, 2000);
} while (--timeout);
- if (!timeout)
- return -ETIMEDOUT;
-
- return 0;
+ return -ETIMEDOUT;
}
static int unimac_mdio_read(struct mii_bus *bus, int phy_id, int reg)
@@ -292,7 +289,7 @@ static int unimac_mdio_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, priv);
- dev_info(&pdev->dev, "Broadcom UniMAC MDIO bus at 0x%p\n", priv->base);
+ dev_info(&pdev->dev, "Broadcom UniMAC MDIO bus\n");
return 0;
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 3745220c5c98..5938c5acf3b3 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -891,9 +891,6 @@ void phy_state_machine(struct work_struct *work)
old_state = phydev->state;
- if (phydev->drv && phydev->drv->link_change_notify)
- phydev->drv->link_change_notify(phydev);
-
switch (phydev->state) {
case PHY_DOWN:
case PHY_READY:
@@ -940,10 +937,13 @@ void phy_state_machine(struct work_struct *work)
if (err < 0)
phy_error(phydev);
- if (old_state != phydev->state)
+ if (old_state != phydev->state) {
phydev_dbg(phydev, "PHY state change %s -> %s\n",
phy_state_to_str(old_state),
phy_state_to_str(phydev->state));
+ if (phydev->drv && phydev->drv->link_change_notify)
+ phydev->drv->link_change_notify(phydev);
+ }
/* Only re-schedule a PHY state machine change if we are polling the
* PHY, if PHY_IGNORE_INTERRUPT is set, then we will be moving
diff --git a/drivers/net/phy/rockchip.c b/drivers/net/phy/rockchip.c
index 95abf7072f32..9053b1d01906 100644
--- a/drivers/net/phy/rockchip.c
+++ b/drivers/net/phy/rockchip.c
@@ -104,41 +104,14 @@ static int rockchip_integrated_phy_config_init(struct phy_device *phydev)
static void rockchip_link_change_notify(struct phy_device *phydev)
{
- int speed = SPEED_10;
-
- if (phydev->autoneg == AUTONEG_ENABLE) {
- int reg = phy_read(phydev, MII_SPECIAL_CONTROL_STATUS);
-
- if (reg < 0) {
- phydev_err(phydev, "phy_read err: %d.\n", reg);
- return;
- }
-
- if (reg & MII_SPEED_100)
- speed = SPEED_100;
- else if (reg & MII_SPEED_10)
- speed = SPEED_10;
- } else {
- int bmcr = phy_read(phydev, MII_BMCR);
-
- if (bmcr < 0) {
- phydev_err(phydev, "phy_read err: %d.\n", bmcr);
- return;
- }
-
- if (bmcr & BMCR_SPEED100)
- speed = SPEED_100;
- else
- speed = SPEED_10;
- }
-
/*
* If mode switch happens from 10BT to 100BT, all DSP/AFE
* registers are set to default values. So any AFE/DSP
* registers have to be re-initialized in this case.
*/
- if ((phydev->speed == SPEED_10) && (speed == SPEED_100)) {
+ if (phydev->state == PHY_RUNNING && phydev->speed == SPEED_100) {
int ret = rockchip_integrated_phy_analog_init(phydev);
+
if (ret)
phydev_err(phydev, "rockchip_integrated_phy_analog_init err: %d.\n",
ret);
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-29 01:35:27 +0000