summaryrefslogtreecommitdiffstats
path: root/drivers/net/sfc
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/sfc')
-rw-r--r--drivers/net/sfc/efx.c6
-rw-r--r--drivers/net/sfc/falcon.c1
-rw-r--r--drivers/net/sfc/falcon_xmac.c38
-rw-r--r--drivers/net/sfc/mcdi_phy.c93
-rw-r--r--drivers/net/sfc/net_driver.h1
-rw-r--r--drivers/net/sfc/nic.c2
-rw-r--r--drivers/net/sfc/qt202x_phy.c238
-rw-r--r--drivers/net/sfc/selftest.c2
-rw-r--r--drivers/net/sfc/siena.c1
-rw-r--r--drivers/net/sfc/tenxpress.c138
-rw-r--r--drivers/net/sfc/tx.c4
11 files changed, 370 insertions, 154 deletions
diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c
index f983e3b507cc..103e8b0e2a0d 100644
--- a/drivers/net/sfc/efx.c
+++ b/drivers/net/sfc/efx.c
@@ -741,14 +741,14 @@ static int efx_probe_port(struct efx_nic *efx)
EFX_LOG(efx, "create port\n");
+ if (phy_flash_cfg)
+ efx->phy_mode = PHY_MODE_SPECIAL;
+
/* Connect up MAC/PHY operations table */
rc = efx->type->probe_port(efx);
if (rc)
goto err;
- if (phy_flash_cfg)
- efx->phy_mode = PHY_MODE_SPECIAL;
-
/* Sanity check MAC address */
if (is_valid_ether_addr(efx->mac_address)) {
memcpy(efx->net_dev->dev_addr, efx->mac_address, ETH_ALEN);
diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c
index 17afcd26e870..9d009c46e962 100644
--- a/drivers/net/sfc/falcon.c
+++ b/drivers/net/sfc/falcon.c
@@ -925,6 +925,7 @@ static int falcon_probe_port(struct efx_nic *efx)
static void falcon_remove_port(struct efx_nic *efx)
{
+ efx->phy_op->remove(efx);
efx_nic_free_buffer(efx, &efx->stats_buffer);
}
diff --git a/drivers/net/sfc/falcon_xmac.c b/drivers/net/sfc/falcon_xmac.c
index 3da933f8f079..8ccab2c67a20 100644
--- a/drivers/net/sfc/falcon_xmac.c
+++ b/drivers/net/sfc/falcon_xmac.c
@@ -111,16 +111,12 @@ static void falcon_mask_status_intr(struct efx_nic *efx, bool enable)
efx_writeo(efx, &reg, FR_AB_XM_MGT_INT_MASK);
}
-/* Get status of XAUI link */
-static bool falcon_xaui_link_ok(struct efx_nic *efx)
+static bool falcon_xgxs_link_ok(struct efx_nic *efx)
{
efx_oword_t reg;
bool align_done, link_ok = false;
int sync_status;
- if (LOOPBACK_INTERNAL(efx))
- return true;
-
/* Read link status */
efx_reado(efx, &reg, FR_AB_XX_CORE_STAT);
@@ -135,14 +131,24 @@ static bool falcon_xaui_link_ok(struct efx_nic *efx)
EFX_SET_OWORD_FIELD(reg, FRF_AB_XX_DISPERR, FFE_AB_XX_STAT_ALL_LANES);
efx_writeo(efx, &reg, FR_AB_XX_CORE_STAT);
- /* If the link is up, then check the phy side of the xaui link */
- if (efx->link_state.up && link_ok)
- if (efx->mdio.mmds & (1 << MDIO_MMD_PHYXS))
- link_ok = efx_mdio_phyxgxs_lane_sync(efx);
-
return link_ok;
}
+static bool falcon_xmac_link_ok(struct efx_nic *efx)
+{
+ /*
+ * Check MAC's XGXS link status except when using XGMII loopback
+ * which bypasses the XGXS block.
+ * If possible, check PHY's XGXS link status except when using
+ * MAC loopback.
+ */
+ return (efx->loopback_mode == LOOPBACK_XGMII ||
+ falcon_xgxs_link_ok(efx)) &&
+ (!(efx->mdio.mmds & (1 << MDIO_MMD_PHYXS)) ||
+ LOOPBACK_INTERNAL(efx) ||
+ efx_mdio_phyxgxs_lane_sync(efx));
+}
+
void falcon_reconfigure_xmac_core(struct efx_nic *efx)
{
unsigned int max_frame_len;
@@ -245,9 +251,9 @@ static void falcon_reconfigure_xgxs_core(struct efx_nic *efx)
/* Try to bring up the Falcon side of the Falcon-Phy XAUI link */
-static bool falcon_check_xaui_link_up(struct efx_nic *efx, int tries)
+static bool falcon_xmac_link_ok_retry(struct efx_nic *efx, int tries)
{
- bool mac_up = falcon_xaui_link_ok(efx);
+ bool mac_up = falcon_xmac_link_ok(efx);
if (LOOPBACK_MASK(efx) & LOOPBACKS_EXTERNAL(efx) & LOOPBACKS_WS ||
efx_phy_mode_disabled(efx->phy_mode))
@@ -261,7 +267,7 @@ static bool falcon_check_xaui_link_up(struct efx_nic *efx, int tries)
falcon_reset_xaui(efx);
udelay(200);
- mac_up = falcon_xaui_link_ok(efx);
+ mac_up = falcon_xmac_link_ok(efx);
--tries;
}
@@ -272,7 +278,7 @@ static bool falcon_check_xaui_link_up(struct efx_nic *efx, int tries)
static bool falcon_xmac_check_fault(struct efx_nic *efx)
{
- return !falcon_check_xaui_link_up(efx, 5);
+ return !falcon_xmac_link_ok_retry(efx, 5);
}
static int falcon_reconfigure_xmac(struct efx_nic *efx)
@@ -284,7 +290,7 @@ static int falcon_reconfigure_xmac(struct efx_nic *efx)
falcon_reconfigure_mac_wrapper(efx);
- efx->xmac_poll_required = !falcon_check_xaui_link_up(efx, 5);
+ efx->xmac_poll_required = !falcon_xmac_link_ok_retry(efx, 5);
falcon_mask_status_intr(efx, true);
return 0;
@@ -357,7 +363,7 @@ void falcon_poll_xmac(struct efx_nic *efx)
return;
falcon_mask_status_intr(efx, false);
- efx->xmac_poll_required = !falcon_check_xaui_link_up(efx, 1);
+ efx->xmac_poll_required = !falcon_xmac_link_ok_retry(efx, 1);
falcon_mask_status_intr(efx, true);
}
diff --git a/drivers/net/sfc/mcdi_phy.c b/drivers/net/sfc/mcdi_phy.c
index 0e1bcc5a0d52..eb694af7a473 100644
--- a/drivers/net/sfc/mcdi_phy.c
+++ b/drivers/net/sfc/mcdi_phy.c
@@ -304,31 +304,47 @@ static u32 mcdi_to_ethtool_media(u32 media)
static int efx_mcdi_phy_probe(struct efx_nic *efx)
{
- struct efx_mcdi_phy_cfg *phy_cfg;
+ struct efx_mcdi_phy_cfg *phy_data;
+ u8 outbuf[MC_CMD_GET_LINK_OUT_LEN];
+ u32 caps;
int rc;
- /* TODO: Move phy_data initialisation to
- * phy_op->probe/remove, rather than init/fini */
- phy_cfg = kzalloc(sizeof(*phy_cfg), GFP_KERNEL);
- if (phy_cfg == NULL) {
- rc = -ENOMEM;
- goto fail_alloc;
- }
- rc = efx_mcdi_get_phy_cfg(efx, phy_cfg);
+ /* Initialise and populate phy_data */
+ phy_data = kzalloc(sizeof(*phy_data), GFP_KERNEL);
+ if (phy_data == NULL)
+ return -ENOMEM;
+
+ rc = efx_mcdi_get_phy_cfg(efx, phy_data);
if (rc != 0)
goto fail;
- efx->phy_type = phy_cfg->type;
+ /* Read initial link advertisement */
+ BUILD_BUG_ON(MC_CMD_GET_LINK_IN_LEN != 0);
+ rc = efx_mcdi_rpc(efx, MC_CMD_GET_LINK, NULL, 0,
+ outbuf, sizeof(outbuf), NULL);
+ if (rc)
+ goto fail;
+
+ /* Fill out nic state */
+ efx->phy_data = phy_data;
+ efx->phy_type = phy_data->type;
- efx->mdio_bus = phy_cfg->channel;
- efx->mdio.prtad = phy_cfg->port;
- efx->mdio.mmds = phy_cfg->mmd_mask & ~(1 << MC_CMD_MMD_CLAUSE22);
+ efx->mdio_bus = phy_data->channel;
+ efx->mdio.prtad = phy_data->port;
+ efx->mdio.mmds = phy_data->mmd_mask & ~(1 << MC_CMD_MMD_CLAUSE22);
efx->mdio.mode_support = 0;
- if (phy_cfg->mmd_mask & (1 << MC_CMD_MMD_CLAUSE22))
+ if (phy_data->mmd_mask & (1 << MC_CMD_MMD_CLAUSE22))
efx->mdio.mode_support |= MDIO_SUPPORTS_C22;
- if (phy_cfg->mmd_mask & ~(1 << MC_CMD_MMD_CLAUSE22))
+ if (phy_data->mmd_mask & ~(1 << MC_CMD_MMD_CLAUSE22))
efx->mdio.mode_support |= MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22;
+ caps = MCDI_DWORD(outbuf, GET_LINK_OUT_CAP);
+ if (caps & (1 << MC_CMD_PHY_CAP_AN_LBN))
+ efx->link_advertising =
+ mcdi_to_ethtool_cap(phy_data->media, caps);
+ else
+ phy_data->forced_cap = caps;
+
/* Assert that we can map efx -> mcdi loopback modes */
BUILD_BUG_ON(LOOPBACK_NONE != MC_CMD_LOOPBACK_NONE);
BUILD_BUG_ON(LOOPBACK_DATA != MC_CMD_LOOPBACK_DATA);
@@ -365,46 +381,6 @@ static int efx_mcdi_phy_probe(struct efx_nic *efx)
* but by convention we don't */
efx->loopback_modes &= ~(1 << LOOPBACK_NONE);
- kfree(phy_cfg);
-
- return 0;
-
-fail:
- kfree(phy_cfg);
-fail_alloc:
- return rc;
-}
-
-static int efx_mcdi_phy_init(struct efx_nic *efx)
-{
- struct efx_mcdi_phy_cfg *phy_data;
- u8 outbuf[MC_CMD_GET_LINK_OUT_LEN];
- u32 caps;
- int rc;
-
- phy_data = kzalloc(sizeof(*phy_data), GFP_KERNEL);
- if (phy_data == NULL)
- return -ENOMEM;
-
- rc = efx_mcdi_get_phy_cfg(efx, phy_data);
- if (rc != 0)
- goto fail;
-
- efx->phy_data = phy_data;
-
- BUILD_BUG_ON(MC_CMD_GET_LINK_IN_LEN != 0);
- rc = efx_mcdi_rpc(efx, MC_CMD_GET_LINK, NULL, 0,
- outbuf, sizeof(outbuf), NULL);
- if (rc)
- goto fail;
-
- caps = MCDI_DWORD(outbuf, GET_LINK_OUT_CAP);
- if (caps & (1 << MC_CMD_PHY_CAP_AN_LBN))
- efx->link_advertising =
- mcdi_to_ethtool_cap(phy_data->media, caps);
- else
- phy_data->forced_cap = caps;
-
return 0;
fail:
@@ -504,7 +480,7 @@ static bool efx_mcdi_phy_poll(struct efx_nic *efx)
return !efx_link_state_equal(&efx->link_state, &old_state);
}
-static void efx_mcdi_phy_fini(struct efx_nic *efx)
+static void efx_mcdi_phy_remove(struct efx_nic *efx)
{
struct efx_mcdi_phy_data *phy_data = efx->phy_data;
@@ -586,10 +562,11 @@ static int efx_mcdi_phy_set_settings(struct efx_nic *efx, struct ethtool_cmd *ec
struct efx_phy_operations efx_mcdi_phy_ops = {
.probe = efx_mcdi_phy_probe,
- .init = efx_mcdi_phy_init,
+ .init = efx_port_dummy_op_int,
.reconfigure = efx_mcdi_phy_reconfigure,
.poll = efx_mcdi_phy_poll,
- .fini = efx_mcdi_phy_fini,
+ .fini = efx_port_dummy_op_void,
+ .remove = efx_mcdi_phy_remove,
.get_settings = efx_mcdi_phy_get_settings,
.set_settings = efx_mcdi_phy_set_settings,
.run_tests = NULL,
diff --git a/drivers/net/sfc/net_driver.h b/drivers/net/sfc/net_driver.h
index 34c381f009b7..d5aab5b3fa06 100644
--- a/drivers/net/sfc/net_driver.h
+++ b/drivers/net/sfc/net_driver.h
@@ -524,6 +524,7 @@ struct efx_phy_operations {
int (*probe) (struct efx_nic *efx);
int (*init) (struct efx_nic *efx);
void (*fini) (struct efx_nic *efx);
+ void (*remove) (struct efx_nic *efx);
int (*reconfigure) (struct efx_nic *efx);
bool (*poll) (struct efx_nic *efx);
void (*get_settings) (struct efx_nic *efx,
diff --git a/drivers/net/sfc/nic.c b/drivers/net/sfc/nic.c
index a577be227862..db44224ed2ca 100644
--- a/drivers/net/sfc/nic.c
+++ b/drivers/net/sfc/nic.c
@@ -1576,6 +1576,8 @@ void efx_nic_init_common(struct efx_nic *efx)
EFX_SET_OWORD_FIELD(temp, FRF_AZ_TX_SOFT_EVT_EN, 1);
/* Prefetch threshold 2 => fetch when descriptor cache half empty */
EFX_SET_OWORD_FIELD(temp, FRF_AZ_TX_PREF_THRESHOLD, 2);
+ /* Disable hardware watchdog which can misfire */
+ EFX_SET_OWORD_FIELD(temp, FRF_AZ_TX_PREF_WD_TMR, 0x3fffff);
/* Squash TX of packets of 16 bytes or less */
if (efx_nic_rev(efx) >= EFX_REV_FALCON_B0)
EFX_SET_OWORD_FIELD(temp, FRF_BZ_TX_FLUSH_MIN_LEN_EN, 1);
diff --git a/drivers/net/sfc/qt202x_phy.c b/drivers/net/sfc/qt202x_phy.c
index 3800fc791b2f..ff8f0a417fa3 100644
--- a/drivers/net/sfc/qt202x_phy.c
+++ b/drivers/net/sfc/qt202x_phy.c
@@ -33,6 +33,9 @@
#define PCS_FW_HEARTBEAT_REG 0xd7ee
#define PCS_FW_HEARTB_LBN 0
#define PCS_FW_HEARTB_WIDTH 8
+#define PCS_FW_PRODUCT_CODE_1 0xd7f0
+#define PCS_FW_VERSION_1 0xd7f3
+#define PCS_FW_BUILD_1 0xd7f6
#define PCS_UC8051_STATUS_REG 0xd7fd
#define PCS_UC_STATUS_LBN 0
#define PCS_UC_STATUS_WIDTH 8
@@ -52,14 +55,24 @@ void falcon_qt202x_set_led(struct efx_nic *p, int led, int mode)
struct qt202x_phy_data {
enum efx_phy_mode phy_mode;
+ bool bug17190_in_bad_state;
+ unsigned long bug17190_timer;
+ u32 firmware_ver;
};
#define QT2022C2_MAX_RESET_TIME 500
#define QT2022C2_RESET_WAIT 10
-static int qt2025c_wait_reset(struct efx_nic *efx)
+#define QT2025C_MAX_HEARTB_TIME (5 * HZ)
+#define QT2025C_HEARTB_WAIT 100
+#define QT2025C_MAX_FWSTART_TIME (25 * HZ / 10)
+#define QT2025C_FWSTART_WAIT 100
+
+#define BUG17190_INTERVAL (2 * HZ)
+
+static int qt2025c_wait_heartbeat(struct efx_nic *efx)
{
- unsigned long timeout = jiffies + 10 * HZ;
+ unsigned long timeout = jiffies + QT2025C_MAX_HEARTB_TIME;
int reg, old_counter = 0;
/* Wait for firmware heartbeat to start */
@@ -74,11 +87,25 @@ static int qt2025c_wait_reset(struct efx_nic *efx)
old_counter = counter;
else if (counter != old_counter)
break;
- if (time_after(jiffies, timeout))
+ if (time_after(jiffies, timeout)) {
+ /* Some cables have EEPROMs that conflict with the
+ * PHY's on-board EEPROM so it cannot load firmware */
+ EFX_ERR(efx, "If an SFP+ direct attach cable is"
+ " connected, please check that it complies"
+ " with the SFP+ specification\n");
return -ETIMEDOUT;
- msleep(10);
+ }
+ msleep(QT2025C_HEARTB_WAIT);
}
+ return 0;
+}
+
+static int qt2025c_wait_fw_status_good(struct efx_nic *efx)
+{
+ unsigned long timeout = jiffies + QT2025C_MAX_FWSTART_TIME;
+ int reg;
+
/* Wait for firmware status to look good */
for (;;) {
reg = efx_mdio_read(efx, MDIO_MMD_PCS, PCS_UC8051_STATUS_REG);
@@ -90,7 +117,178 @@ static int qt2025c_wait_reset(struct efx_nic *efx)
break;
if (time_after(jiffies, timeout))
return -ETIMEDOUT;
+ msleep(QT2025C_FWSTART_WAIT);
+ }
+
+ return 0;
+}
+
+static void qt2025c_restart_firmware(struct efx_nic *efx)
+{
+ /* Restart microcontroller execution of firmware from RAM */
+ efx_mdio_write(efx, 3, 0xe854, 0x00c0);
+ efx_mdio_write(efx, 3, 0xe854, 0x0040);
+ msleep(50);
+}
+
+static int qt2025c_wait_reset(struct efx_nic *efx)
+{
+ int rc;
+
+ rc = qt2025c_wait_heartbeat(efx);
+ if (rc != 0)
+ return rc;
+
+ rc = qt2025c_wait_fw_status_good(efx);
+ if (rc == -ETIMEDOUT) {
+ /* Bug 17689: occasionally heartbeat starts but firmware status
+ * code never progresses beyond 0x00. Try again, once, after
+ * restarting execution of the firmware image. */
+ EFX_LOG(efx, "bashing QT2025C microcontroller\n");
+ qt2025c_restart_firmware(efx);
+ rc = qt2025c_wait_heartbeat(efx);
+ if (rc != 0)
+ return rc;
+ rc = qt2025c_wait_fw_status_good(efx);
+ }
+
+ return rc;
+}
+
+static void qt2025c_firmware_id(struct efx_nic *efx)
+{
+ struct qt202x_phy_data *phy_data = efx->phy_data;
+ u8 firmware_id[9];
+ size_t i;
+
+ for (i = 0; i < sizeof(firmware_id); i++)
+ firmware_id[i] = efx_mdio_read(efx, MDIO_MMD_PCS,
+ PCS_FW_PRODUCT_CODE_1 + i);
+ EFX_INFO(efx, "QT2025C firmware %xr%d v%d.%d.%d.%d [20%02d-%02d-%02d]\n",
+ (firmware_id[0] << 8) | firmware_id[1], firmware_id[2],
+ firmware_id[3] >> 4, firmware_id[3] & 0xf,
+ firmware_id[4], firmware_id[5],
+ firmware_id[6], firmware_id[7], firmware_id[8]);
+ phy_data->firmware_ver = ((firmware_id[3] & 0xf0) << 20) |
+ ((firmware_id[3] & 0x0f) << 16) |
+ (firmware_id[4] << 8) | firmware_id[5];
+}
+
+static void qt2025c_bug17190_workaround(struct efx_nic *efx)
+{
+ struct qt202x_phy_data *phy_data = efx->phy_data;
+
+ /* The PHY can get stuck in a state where it reports PHY_XS and PMA/PMD
+ * layers up, but PCS down (no block_lock). If we notice this state
+ * persisting for a couple of seconds, we switch PMA/PMD loopback
+ * briefly on and then off again, which is normally sufficient to
+ * recover it.
+ */
+ if (efx->link_state.up ||
+ !efx_mdio_links_ok(efx, MDIO_DEVS_PMAPMD | MDIO_DEVS_PHYXS)) {
+ phy_data->bug17190_in_bad_state = false;
+ return;
+ }
+
+ if (!phy_data->bug17190_in_bad_state) {
+ phy_data->bug17190_in_bad_state = true;
+ phy_data->bug17190_timer = jiffies + BUG17190_INTERVAL;
+ return;
+ }
+
+ if (time_after_eq(jiffies, phy_data->bug17190_timer)) {
+ EFX_LOG(efx, "bashing QT2025C PMA/PMD\n");
+ efx_mdio_set_flag(efx, MDIO_MMD_PMAPMD, MDIO_CTRL1,
+ MDIO_PMA_CTRL1_LOOPBACK, true);
msleep(100);
+ efx_mdio_set_flag(efx, MDIO_MMD_PMAPMD, MDIO_CTRL1,
+ MDIO_PMA_CTRL1_LOOPBACK, false);
+ phy_data->bug17190_timer = jiffies + BUG17190_INTERVAL;
+ }
+}
+
+static int qt2025c_select_phy_mode(struct efx_nic *efx)
+{
+ struct qt202x_phy_data *phy_data = efx->phy_data;
+ struct falcon_board *board = falcon_board(efx);
+ int reg, rc, i;
+ uint16_t phy_op_mode;
+
+ /* Only 2.0.1.0+ PHY firmware supports the more optimal SFP+
+ * Self-Configure mode. Don't attempt any switching if we encounter
+ * older firmware. */
+ if (phy_data->firmware_ver < 0x02000100)
+ return 0;
+
+ /* In general we will get optimal behaviour in "SFP+ Self-Configure"
+ * mode; however, that powers down most of the PHY when no module is
+ * present, so we must use a different mode (any fixed mode will do)
+ * to be sure that loopbacks will work. */
+ phy_op_mode = (efx->loopback_mode == LOOPBACK_NONE) ? 0x0038 : 0x0020;
+
+ /* Only change mode if really necessary */
+ reg = efx_mdio_read(efx, 1, 0xc319);
+ if ((reg & 0x0038) == phy_op_mode)
+ return 0;
+ EFX_LOG(efx, "Switching PHY to mode 0x%04x\n", phy_op_mode);
+
+ /* This sequence replicates the register writes configured in the boot
+ * EEPROM (including the differences between board revisions), except
+ * that the operating mode is changed, and the PHY is prevented from
+ * unnecessarily reloading the main firmware image again. */
+ efx_mdio_write(efx, 1, 0xc300, 0x0000);
+ /* (Note: this portion of the boot EEPROM sequence, which bit-bashes 9
+ * STOPs onto the firmware/module I2C bus to reset it, varies across
+ * board revisions, as the bus is connected to different GPIO/LED
+ * outputs on the PHY.) */
+ if (board->major == 0 && board->minor < 2) {
+ efx_mdio_write(efx, 1, 0xc303, 0x4498);
+ for (i = 0; i < 9; i++) {
+ efx_mdio_write(efx, 1, 0xc303, 0x4488);
+ efx_mdio_write(efx, 1, 0xc303, 0x4480);
+ efx_mdio_write(efx, 1, 0xc303, 0x4490);
+ efx_mdio_write(efx, 1, 0xc303, 0x4498);
+ }
+ } else {
+ efx_mdio_write(efx, 1, 0xc303, 0x0920);
+ efx_mdio_write(efx, 1, 0xd008, 0x0004);
+ for (i = 0; i < 9; i++) {
+ efx_mdio_write(efx, 1, 0xc303, 0x0900);
+ efx_mdio_write(efx, 1, 0xd008, 0x0005);
+ efx_mdio_write(efx, 1, 0xc303, 0x0920);
+ efx_mdio_write(efx, 1, 0xd008, 0x0004);
+ }
+ efx_mdio_write(efx, 1, 0xc303, 0x4900);
+ }
+ efx_mdio_write(efx, 1, 0xc303, 0x4900);
+ efx_mdio_write(efx, 1, 0xc302, 0x0004);
+ efx_mdio_write(efx, 1, 0xc316, 0x0013);
+ efx_mdio_write(efx, 1, 0xc318, 0x0054);
+ efx_mdio_write(efx, 1, 0xc319, phy_op_mode);
+ efx_mdio_write(efx, 1, 0xc31a, 0x0098);
+ efx_mdio_write(efx, 3, 0x0026, 0x0e00);
+ efx_mdio_write(efx, 3, 0x0027, 0x0013);
+ efx_mdio_write(efx, 3, 0x0028, 0xa528);
+ efx_mdio_write(efx, 1, 0xd006, 0x000a);
+ efx_mdio_write(efx, 1, 0xd007, 0x0009);
+ efx_mdio_write(efx, 1, 0xd008, 0x0004);
+ /* This additional write is not present in the boot EEPROM. It
+ * prevents the PHY's internal boot ROM doing another pointless (and
+ * slow) reload of the firmware image (the microcontroller's code
+ * memory is not affected by the microcontroller reset). */
+ efx_mdio_write(efx, 1, 0xc317, 0x00ff);
+ efx_mdio_write(efx, 1, 0xc300, 0x0002);
+ msleep(20);
+
+ /* Restart microcontroller execution of firmware from RAM */
+ qt2025c_restart_firmware(efx);
+
+ /* Wait for the microcontroller to be ready again */
+ rc = qt2025c_wait_reset(efx);
+ if (rc < 0) {
+ EFX_ERR(efx, "PHY microcontroller reset during mode switch "
+ "timed out\n");
+ return rc;
}
return 0;
@@ -137,6 +335,16 @@ static int qt202x_reset_phy(struct efx_nic *efx)
static int qt202x_phy_probe(struct efx_nic *efx)
{
+ struct qt202x_phy_data *phy_data;
+
+ phy_data = kzalloc(sizeof(struct qt202x_phy_data), GFP_KERNEL);
+ if (!phy_data)
+ return -ENOMEM;
+ efx->phy_data = phy_data;
+ phy_data->phy_mode = efx->phy_mode;
+ phy_data->bug17190_in_bad_state = false;
+ phy_data->bug17190_timer = 0;
+
efx->mdio.mmds = QT202X_REQUIRED_DEVS;
efx->mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22;
efx->loopback_modes = QT202X_LOOPBACKS | FALCON_XMAC_LOOPBACKS;
@@ -145,7 +353,6 @@ static int qt202x_phy_probe(struct efx_nic *efx)
static int qt202x_phy_init(struct efx_nic *efx)
{
- struct qt202x_phy_data *phy_data;
u32 devid;
int rc;
@@ -155,17 +362,14 @@ static int qt202x_phy_init(struct efx_nic *efx)
return rc;
}
- phy_data = kzalloc(sizeof(struct qt202x_phy_data), GFP_KERNEL);
- if (!phy_data)
- return -ENOMEM;
- efx->phy_data = phy_data;
-
devid = efx_mdio_read_id(efx, MDIO_MMD_PHYXS);
EFX_INFO(efx, "PHY ID reg %x (OUI %06x model %02x revision %x)\n",
devid, efx_mdio_id_oui(devid), efx_mdio_id_model(devid),
efx_mdio_id_rev(devid));
- phy_data->phy_mode = efx->phy_mode;
+ if (efx->phy_type == PHY_TYPE_QT2025C)
+ qt2025c_firmware_id(efx);
+
return 0;
}
@@ -183,6 +387,9 @@ static bool qt202x_phy_poll(struct efx_nic *efx)
efx->link_state.fd = true;
efx->link_state.fc = efx->wanted_fc;
+ if (efx->phy_type == PHY_TYPE_QT2025C)
+ qt2025c_bug17190_workaround(efx);
+
return efx->link_state.up != was_up;
}
@@ -191,6 +398,10 @@ static int qt202x_phy_reconfigure(struct efx_nic *efx)
struct qt202x_phy_data *phy_data = efx->phy_data;
if (efx->phy_type == PHY_TYPE_QT2025C) {
+ int rc = qt2025c_select_phy_mode(efx);
+ if (rc)
+ return rc;
+
/* There are several different register bits which can
* disable TX (and save power) on direct-attach cables
* or optical transceivers, varying somewhat between
@@ -224,7 +435,7 @@ static void qt202x_phy_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecm
mdio45_ethtool_gset(&efx->mdio, ecmd);
}
-static void qt202x_phy_fini(struct efx_nic *efx)
+static void qt202x_phy_remove(struct efx_nic *efx)
{
/* Free the context block */
kfree(efx->phy_data);
@@ -236,7 +447,8 @@ struct efx_phy_operations falcon_qt202x_phy_ops = {
.init = qt202x_phy_init,
.reconfigure = qt202x_phy_reconfigure,
.poll = qt202x_phy_poll,
- .fini = qt202x_phy_fini,
+ .fini = efx_port_dummy_op_void,
+ .remove = qt202x_phy_remove,
.get_settings = qt202x_phy_get_settings,
.set_settings = efx_mdio_set_settings,
};
diff --git a/drivers/net/sfc/selftest.c b/drivers/net/sfc/selftest.c
index 14949bb303a0..af3933579790 100644
--- a/drivers/net/sfc/selftest.c
+++ b/drivers/net/sfc/selftest.c
@@ -47,7 +47,7 @@ static const unsigned char payload_source[ETH_ALEN] = {
0x00, 0x0f, 0x53, 0x1b, 0x1b, 0x1b,
};
-static const char *payload_msg =
+static const char payload_msg[] =
"Hello world! This is an Efx loopback test in progress!";
/**
diff --git a/drivers/net/sfc/siena.c b/drivers/net/sfc/siena.c
index de07a4f031b2..f8c6771e66d8 100644
--- a/drivers/net/sfc/siena.c
+++ b/drivers/net/sfc/siena.c
@@ -133,6 +133,7 @@ static int siena_probe_port(struct efx_nic *efx)
void siena_remove_port(struct efx_nic *efx)
{
+ efx->phy_op->remove(efx);
efx_nic_free_buffer(efx, &efx->stats_buffer);
}
diff --git a/drivers/net/sfc/tenxpress.c b/drivers/net/sfc/tenxpress.c
index ca11572a49a9..3009c297c135 100644
--- a/drivers/net/sfc/tenxpress.c
+++ b/drivers/net/sfc/tenxpress.c
@@ -202,10 +202,14 @@ static ssize_t set_phy_short_reach(struct device *dev,
int rc;
rtnl_lock();
- efx_mdio_set_flag(efx, MDIO_MMD_PMAPMD, MDIO_PMA_10GBT_TXPWR,
- MDIO_PMA_10GBT_TXPWR_SHORT,
- count != 0 && *buf != '0');
- rc = efx_reconfigure_port(efx);
+ if (efx->state != STATE_RUNNING) {
+ rc = -EBUSY;
+ } else {
+ efx_mdio_set_flag(efx, MDIO_MMD_PMAPMD, MDIO_PMA_10GBT_TXPWR,
+ MDIO_PMA_10GBT_TXPWR_SHORT,
+ count != 0 && *buf != '0');
+ rc = efx_reconfigure_port(efx);
+ }
rtnl_unlock();
return rc < 0 ? rc : (ssize_t)count;
@@ -298,36 +302,62 @@ static int tenxpress_init(struct efx_nic *efx)
return 0;
}
-static int sfx7101_phy_probe(struct efx_nic *efx)
+static int tenxpress_phy_probe(struct efx_nic *efx)
{
- efx->mdio.mmds = TENXPRESS_REQUIRED_DEVS;
- efx->mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22;
- efx->loopback_modes = SFX7101_LOOPBACKS | FALCON_XMAC_LOOPBACKS;
- return 0;
-}
+ struct tenxpress_phy_data *phy_data;
+ int rc;
+
+ /* Allocate phy private storage */
+ phy_data = kzalloc(sizeof(*phy_data), GFP_KERNEL);
+ if (!phy_data)
+ return -ENOMEM;
+ efx->phy_data = phy_data;
+ phy_data->phy_mode = efx->phy_mode;
+
+ /* Create any special files */
+ if (efx->phy_type == PHY_TYPE_SFT9001B) {
+ rc = device_create_file(&efx->pci_dev->dev,
+ &dev_attr_phy_short_reach);
+ if (rc)
+ goto fail;
+ }
+
+ if (efx->phy_type == PHY_TYPE_SFX7101) {
+ efx->mdio.mmds = TENXPRESS_REQUIRED_DEVS;
+ efx->mdio.mode_support = MDIO_SUPPORTS_C45;
+
+ efx->loopback_modes = SFX7101_LOOPBACKS | FALCON_XMAC_LOOPBACKS;
+
+ efx->link_advertising = (ADVERTISED_TP | ADVERTISED_Autoneg |
+ ADVERTISED_10000baseT_Full);
+ } else {
+ efx->mdio.mmds = TENXPRESS_REQUIRED_DEVS;
+ efx->mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22;
+
+ efx->loopback_modes = (SFT9001_LOOPBACKS |
+ FALCON_XMAC_LOOPBACKS |
+ FALCON_GMAC_LOOPBACKS);
+
+ efx->link_advertising = (ADVERTISED_TP | ADVERTISED_Autoneg |
+ ADVERTISED_10000baseT_Full |
+ ADVERTISED_1000baseT_Full |
+ ADVERTISED_100baseT_Full);
+ }
-static int sft9001_phy_probe(struct efx_nic *efx)
-{
- efx->mdio.mmds = TENXPRESS_REQUIRED_DEVS;
- efx->mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22;
- efx->loopback_modes = (SFT9001_LOOPBACKS | FALCON_XMAC_LOOPBACKS |
- FALCON_GMAC_LOOPBACKS);
return 0;
+
+fail:
+ kfree(efx->phy_data);
+ efx->phy_data = NULL;
+ return rc;
}
static int tenxpress_phy_init(struct efx_nic *efx)
{
- struct tenxpress_phy_data *phy_data;
- int rc = 0;
+ int rc;
falcon_board(efx)->type->init_phy(efx);
- phy_data = kzalloc(sizeof(*phy_data), GFP_KERNEL);
- if (!phy_data)
- return -ENOMEM;
- efx->phy_data = phy_data;
- phy_data->phy_mode = efx->phy_mode;
-
if (!(efx->phy_mode & PHY_MODE_SPECIAL)) {
if (efx->phy_type == PHY_TYPE_SFT9001A) {
int reg;
@@ -341,44 +371,27 @@ static int tenxpress_phy_init(struct efx_nic *efx)
rc = efx_mdio_wait_reset_mmds(efx, TENXPRESS_REQUIRED_DEVS);
if (rc < 0)
- goto fail;
+ return rc;
rc = efx_mdio_check_mmds(efx, TENXPRESS_REQUIRED_DEVS, 0);
if (rc < 0)
- goto fail;
+ return rc;
}
rc = tenxpress_init(efx);
if (rc < 0)
- goto fail;
+ return rc;
- /* Initialise advertising flags */
- efx->link_advertising = (ADVERTISED_TP | ADVERTISED_Autoneg |
- ADVERTISED_10000baseT_Full);
- if (efx->phy_type != PHY_TYPE_SFX7101)
- efx->link_advertising |= (ADVERTISED_1000baseT_Full |
- ADVERTISED_100baseT_Full);
+ /* Reinitialise flow control settings */
efx_link_set_wanted_fc(efx, efx->wanted_fc);
efx_mdio_an_reconfigure(efx);
- if (efx->phy_type == PHY_TYPE_SFT9001B) {
- rc = device_create_file(&efx->pci_dev->dev,
- &dev_attr_phy_short_reach);
- if (rc)
- goto fail;
- }
-
schedule_timeout_uninterruptible(HZ / 5); /* 200ms */
/* Let XGXS and SerDes out of reset */
falcon_reset_xaui(efx);
return 0;
-
- fail:
- kfree(efx->phy_data);
- efx->phy_data = NULL;
- return rc;
}
/* Perform a "special software reset" on the PHY. The caller is
@@ -589,25 +602,26 @@ static bool tenxpress_phy_poll(struct efx_nic *efx)
return !efx_link_state_equal(&efx->link_state, &old_state);
}
-static void tenxpress_phy_fini(struct efx_nic *efx)
+static void sfx7101_phy_fini(struct efx_nic *efx)
{
int reg;
+ /* Power down the LNPGA */
+ reg = (1 << PMA_PMD_LNPGA_POWERDOWN_LBN);
+ efx_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_XCONTROL_REG, reg);
+
+ /* Waiting here ensures that the board fini, which can turn
+ * off the power to the PHY, won't get run until the LNPGA
+ * powerdown has been given long enough to complete. */
+ schedule_timeout_uninterruptible(LNPGA_PDOWN_WAIT); /* 200 ms */
+}
+
+static void tenxpress_phy_remove(struct efx_nic *efx)
+{
if (efx->phy_type == PHY_TYPE_SFT9001B)
device_remove_file(&efx->pci_dev->dev,
&dev_attr_phy_short_reach);
- if (efx->phy_type == PHY_TYPE_SFX7101) {
- /* Power down the LNPGA */
- reg = (1 << PMA_PMD_LNPGA_POWERDOWN_LBN);
- efx_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_XCONTROL_REG, reg);
-
- /* Waiting here ensures that the board fini, which can turn
- * off the power to the PHY, won't get run until the LNPGA
- * powerdown has been given long enough to complete. */
- schedule_timeout_uninterruptible(LNPGA_PDOWN_WAIT); /* 200 ms */
- }
-
kfree(efx->phy_data);
efx->phy_data = NULL;
}
@@ -819,11 +833,12 @@ static void sft9001_set_npage_adv(struct efx_nic *efx, u32 advertising)
}
struct efx_phy_operations falcon_sfx7101_phy_ops = {
- .probe = sfx7101_phy_probe,
+ .probe = tenxpress_phy_probe,
.init = tenxpress_phy_init,
.reconfigure = tenxpress_phy_reconfigure,
.poll = tenxpress_phy_poll,
- .fini = tenxpress_phy_fini,
+ .fini = sfx7101_phy_fini,
+ .remove = tenxpress_phy_remove,
.get_settings = tenxpress_get_settings,
.set_settings = tenxpress_set_settings,
.set_npage_adv = sfx7101_set_npage_adv,
@@ -832,11 +847,12 @@ struct efx_phy_operations falcon_sfx7101_phy_ops = {
};
struct efx_phy_operations falcon_sft9001_phy_ops = {
- .probe = sft9001_phy_probe,
+ .probe = tenxpress_phy_probe,
.init = tenxpress_phy_init,
.reconfigure = tenxpress_phy_reconfigure,
.poll = tenxpress_phy_poll,
- .fini = tenxpress_phy_fini,
+ .fini = efx_port_dummy_op_void,
+ .remove = tenxpress_phy_remove,
.get_settings = tenxpress_get_settings,
.set_settings = tenxpress_set_settings,
.set_npage_adv = sft9001_set_npage_adv,
diff --git a/drivers/net/sfc/tx.c b/drivers/net/sfc/tx.c
index e669f94e821b..a8b70ef6d817 100644
--- a/drivers/net/sfc/tx.c
+++ b/drivers/net/sfc/tx.c
@@ -821,8 +821,6 @@ static void efx_enqueue_unwind(struct efx_tx_queue *tx_queue)
EFX_TXQ_MASK];
efx_tsoh_free(tx_queue, buffer);
EFX_BUG_ON_PARANOID(buffer->skb);
- buffer->len = 0;
- buffer->continuation = true;
if (buffer->unmap_len) {
unmap_addr = (buffer->dma_addr + buffer->len -
buffer->unmap_len);
@@ -836,6 +834,8 @@ static void efx_enqueue_unwind(struct efx_tx_queue *tx_queue)
PCI_DMA_TODEVICE);
buffer->unmap_len = 0;
}
+ buffer->len = 0;
+ buffer->continuation = true;
}
}
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-01 05:35:47 +0000