diff options
Diffstat (limited to 'drivers/net/via-velocity.c')
| -rw-r--r-- | drivers/net/via-velocity.c | 3303 |
1 files changed, 3303 insertions, 0 deletions
diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c new file mode 100644 index 000000000000..15e710283493 --- /dev/null +++ b/drivers/net/via-velocity.c @@ -0,0 +1,3303 @@ +/* + * This code is derived from the VIA reference driver (copyright message + * below) provided to Red Hat by VIA Networking Technologies, Inc. for + * addition to the Linux kernel. + * + * The code has been merged into one source file, cleaned up to follow + * Linux coding style, ported to the Linux 2.6 kernel tree and cleaned + * for 64bit hardware platforms. + * + * TODO + * Big-endian support + * rx_copybreak/alignment + * Scatter gather + * More testing + * + * The changes are (c) Copyright 2004, Red Hat Inc. <alan@redhat.com> + * Additional fixes and clean up: Francois Romieu + * + * This source has not been verified for use in safety critical systems. + * + * Please direct queries about the revamped driver to the linux-kernel + * list not VIA. + * + * Original code: + * + * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc. + * All rights reserved. + * + * This software may be redistributed and/or modified under + * the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or + * any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * Author: Chuang Liang-Shing, AJ Jiang + * + * Date: Jan 24, 2003 + * + * MODULE_LICENSE("GPL"); + * + */ + + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/config.h> +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/errno.h> +#include <linux/ioport.h> +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/delay.h> +#include <linux/timer.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/version.h> +#include <linux/string.h> +#include <linux/wait.h> +#include <asm/io.h> +#include <linux/if.h> +#include <linux/config.h> +#include <asm/uaccess.h> +#include <linux/proc_fs.h> +#include <linux/inetdevice.h> +#include <linux/reboot.h> +#include <linux/ethtool.h> +#include <linux/mii.h> +#include <linux/in.h> +#include <linux/if_arp.h> +#include <linux/ip.h> +#include <linux/tcp.h> +#include <linux/udp.h> +#include <linux/crc-ccitt.h> +#include <linux/crc32.h> + +#include "via-velocity.h" + + +static int velocity_nics = 0; +static int msglevel = MSG_LEVEL_INFO; + + +static int velocity_mii_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd); +static struct ethtool_ops velocity_ethtool_ops; + +/* + Define module options +*/ + +MODULE_AUTHOR("VIA Networking Technologies, Inc."); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("VIA Networking Velocity Family Gigabit Ethernet Adapter Driver"); + +#define VELOCITY_PARAM(N,D) \ + static int N[MAX_UNITS]=OPTION_DEFAULT;\ + module_param_array(N, int, NULL, 0); \ + MODULE_PARM_DESC(N, D); + +#define RX_DESC_MIN 64 +#define RX_DESC_MAX 255 +#define RX_DESC_DEF 64 +VELOCITY_PARAM(RxDescriptors, "Number of receive descriptors"); + +#define TX_DESC_MIN 16 +#define TX_DESC_MAX 256 +#define TX_DESC_DEF 64 +VELOCITY_PARAM(TxDescriptors, "Number of transmit descriptors"); + +#define VLAN_ID_MIN 0 +#define VLAN_ID_MAX 4095 +#define VLAN_ID_DEF 0 +/* VID_setting[] is used for setting the VID of NIC. + 0: default VID. + 1-4094: other VIDs. +*/ +VELOCITY_PARAM(VID_setting, "802.1Q VLAN ID"); + +#define RX_THRESH_MIN 0 +#define RX_THRESH_MAX 3 +#define RX_THRESH_DEF 0 +/* rx_thresh[] is used for controlling the receive fifo threshold. + 0: indicate the rxfifo threshold is 128 bytes. + 1: indicate the rxfifo threshold is 512 bytes. + 2: indicate the rxfifo threshold is 1024 bytes. + 3: indicate the rxfifo threshold is store & forward. +*/ +VELOCITY_PARAM(rx_thresh, "Receive fifo threshold"); + +#define DMA_LENGTH_MIN 0 +#define DMA_LENGTH_MAX 7 +#define DMA_LENGTH_DEF 0 + +/* DMA_length[] is used for controlling the DMA length + 0: 8 DWORDs + 1: 16 DWORDs + 2: 32 DWORDs + 3: 64 DWORDs + 4: 128 DWORDs + 5: 256 DWORDs + 6: SF(flush till emply) + 7: SF(flush till emply) +*/ +VELOCITY_PARAM(DMA_length, "DMA length"); + +#define TAGGING_DEF 0 +/* enable_tagging[] is used for enabling 802.1Q VID tagging. + 0: disable VID seeting(default). + 1: enable VID setting. +*/ +VELOCITY_PARAM(enable_tagging, "Enable 802.1Q tagging"); + +#define IP_ALIG_DEF 0 +/* IP_byte_align[] is used for IP header DWORD byte aligned + 0: indicate the IP header won't be DWORD byte aligned.(Default) . + 1: indicate the IP header will be DWORD byte aligned. + In some enviroment, the IP header should be DWORD byte aligned, + or the packet will be droped when we receive it. (eg: IPVS) +*/ +VELOCITY_PARAM(IP_byte_align, "Enable IP header dword aligned"); + +#define TX_CSUM_DEF 1 +/* txcsum_offload[] is used for setting the checksum offload ability of NIC. + (We only support RX checksum offload now) + 0: disable csum_offload[checksum offload + 1: enable checksum offload. (Default) +*/ +VELOCITY_PARAM(txcsum_offload, "Enable transmit packet checksum offload"); + +#define FLOW_CNTL_DEF 1 +#define FLOW_CNTL_MIN 1 +#define FLOW_CNTL_MAX 5 + +/* flow_control[] is used for setting the flow control ability of NIC. + 1: hardware deafult - AUTO (default). Use Hardware default value in ANAR. + 2: enable TX flow control. + 3: enable RX flow control. + 4: enable RX/TX flow control. + 5: disable +*/ +VELOCITY_PARAM(flow_control, "Enable flow control ability"); + +#define MED_LNK_DEF 0 +#define MED_LNK_MIN 0 +#define MED_LNK_MAX 4 +/* speed_duplex[] is used for setting the speed and duplex mode of NIC. + 0: indicate autonegotiation for both speed and duplex mode + 1: indicate 100Mbps half duplex mode + 2: indicate 100Mbps full duplex mode + 3: indicate 10Mbps half duplex mode + 4: indicate 10Mbps full duplex mode + + Note: + if EEPROM have been set to the force mode, this option is ignored + by driver. +*/ +VELOCITY_PARAM(speed_duplex, "Setting the speed and duplex mode"); + +#define VAL_PKT_LEN_DEF 0 +/* ValPktLen[] is used for setting the checksum offload ability of NIC. + 0: Receive frame with invalid layer 2 length (Default) + 1: Drop frame with invalid layer 2 length +*/ +VELOCITY_PARAM(ValPktLen, "Receiving or Drop invalid 802.3 frame"); + +#define WOL_OPT_DEF 0 +#define WOL_OPT_MIN 0 +#define WOL_OPT_MAX 7 +/* wol_opts[] is used for controlling wake on lan behavior. + 0: Wake up if recevied a magic packet. (Default) + 1: Wake up if link status is on/off. + 2: Wake up if recevied an arp packet. + 4: Wake up if recevied any unicast packet. + Those value can be sumed up to support more than one option. +*/ +VELOCITY_PARAM(wol_opts, "Wake On Lan options"); + +#define INT_WORKS_DEF 20 +#define INT_WORKS_MIN 10 +#define INT_WORKS_MAX 64 + +VELOCITY_PARAM(int_works, "Number of packets per interrupt services"); + +static int rx_copybreak = 200; +module_param(rx_copybreak, int, 0644); +MODULE_PARM_DESC(rx_copybreak, "Copy breakpoint for copy-only-tiny-frames"); + +static void velocity_init_info(struct pci_dev *pdev, struct velocity_info *vptr, struct velocity_info_tbl *info); +static int velocity_get_pci_info(struct velocity_info *, struct pci_dev *pdev); +static void velocity_print_info(struct velocity_info *vptr); +static int velocity_open(struct net_device *dev); +static int velocity_change_mtu(struct net_device *dev, int mtu); +static int velocity_xmit(struct sk_buff *skb, struct net_device *dev); +static int velocity_intr(int irq, void *dev_instance, struct pt_regs *regs); +static void velocity_set_multi(struct net_device *dev); +static struct net_device_stats *velocity_get_stats(struct net_device *dev); +static int velocity_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); +static int velocity_close(struct net_device *dev); +static int velocity_receive_frame(struct velocity_info *, int idx); +static int velocity_alloc_rx_buf(struct velocity_info *, int idx); +static void velocity_free_rd_ring(struct velocity_info *vptr); +static void velocity_free_tx_buf(struct velocity_info *vptr, struct velocity_td_info *); +static int velocity_soft_reset(struct velocity_info *vptr); +static void mii_init(struct velocity_info *vptr, u32 mii_status); +static u32 velocity_get_opt_media_mode(struct velocity_info *vptr); +static void velocity_print_link_status(struct velocity_info *vptr); +static void safe_disable_mii_autopoll(struct mac_regs __iomem * regs); +static void velocity_shutdown(struct velocity_info *vptr); +static void enable_flow_control_ability(struct velocity_info *vptr); +static void enable_mii_autopoll(struct mac_regs __iomem * regs); +static int velocity_mii_read(struct mac_regs __iomem *, u8 byIdx, u16 * pdata); +static int velocity_mii_write(struct mac_regs __iomem *, u8 byMiiAddr, u16 data); +static u32 mii_check_media_mode(struct mac_regs __iomem * regs); +static u32 check_connection_type(struct mac_regs __iomem * regs); +static int velocity_set_media_mode(struct velocity_info *vptr, u32 mii_status); + +#ifdef CONFIG_PM + +static int velocity_suspend(struct pci_dev *pdev, pm_message_t state); +static int velocity_resume(struct pci_dev *pdev); + +static int velocity_netdev_event(struct notifier_block *nb, unsigned long notification, void *ptr); + +static struct notifier_block velocity_inetaddr_notifier = { + .notifier_call = velocity_netdev_event, +}; + +static DEFINE_SPINLOCK(velocity_dev_list_lock); +static LIST_HEAD(velocity_dev_list); + +static void velocity_register_notifier(void) +{ + register_inetaddr_notifier(&velocity_inetaddr_notifier); +} + +static void velocity_unregister_notifier(void) +{ + unregister_inetaddr_notifier(&velocity_inetaddr_notifier); +} + +#else /* CONFIG_PM */ + +#define velocity_register_notifier() do {} while (0) +#define velocity_unregister_notifier() do {} while (0) + +#endif /* !CONFIG_PM */ + +/* + * Internal board variants. At the moment we have only one + */ + +static struct velocity_info_tbl chip_info_table[] = { + {CHIP_TYPE_VT6110, "VIA Networking Velocity Family Gigabit Ethernet Adapter", 256, 1, 0x00FFFFFFUL}, + {0, NULL} +}; + +/* + * Describe the PCI device identifiers that we support in this + * device driver. Used for hotplug autoloading. + */ + +static struct pci_device_id velocity_id_table[] __devinitdata = { + {PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_612X, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, (unsigned long) chip_info_table}, + {0, } +}; + +MODULE_DEVICE_TABLE(pci, velocity_id_table); + +/** + * get_chip_name - identifier to name + * @id: chip identifier + * + * Given a chip identifier return a suitable description. Returns + * a pointer a static string valid while the driver is loaded. + */ + +static char __devinit *get_chip_name(enum chip_type chip_id) +{ + int i; + for (i = 0; chip_info_table[i].name != NULL; i++) + if (chip_info_table[i].chip_id == chip_id) + break; + return chip_info_table[i].name; +} + +/** + * velocity_remove1 - device unplug + * @pdev: PCI device being removed + * + * Device unload callback. Called on an unplug or on module + * unload for each active device that is present. Disconnects + * the device from the network layer and frees all the resources + */ + +static void __devexit velocity_remove1(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct velocity_info *vptr = dev->priv; + +#ifdef CONFIG_PM + unsigned long flags; + + spin_lock_irqsave(&velocity_dev_list_lock, flags); + if (!list_empty(&velocity_dev_list)) + list_del(&vptr->list); + spin_unlock_irqrestore(&velocity_dev_list_lock, flags); +#endif + unregister_netdev(dev); + iounmap(vptr->mac_regs); + pci_release_regions(pdev); + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); + free_netdev(dev); + + velocity_nics--; +} + +/** + * velocity_set_int_opt - parser for integer options + * @opt: pointer to option value + * @val: value the user requested (or -1 for default) + * @min: lowest value allowed + * @max: highest value allowed + * @def: default value + * @name: property name + * @dev: device name + * + * Set an integer property in the module options. This function does + * all the verification and checking as well as reporting so that + * we don't duplicate code for each option. + */ + +static void __devinit velocity_set_int_opt(int *opt, int val, int min, int max, int def, char *name, char *devname) +{ + if (val == -1) + *opt = def; + else if (val < min || val > max) { + VELOCITY_PRT(MSG_LEVEL_INFO, KERN_NOTICE "%s: the value of parameter %s is invalid, the valid range is (%d-%d)\n", + devname, name, min, max); + *opt = def; + } else { + VELOCITY_PRT(MSG_LEVEL_INFO, KERN_INFO "%s: set value of parameter %s to %d\n", + devname, name, val); + *opt = val; + } +} + +/** + * velocity_set_bool_opt - parser for boolean options + * @opt: pointer to option value + * @val: value the user requested (or -1 for default) + * @def: default value (yes/no) + * @flag: numeric value to set for true. + * @name: property name + * @dev: device name + * + * Set a boolean property in the module options. This function does + * all the verification and checking as well as reporting so that + * we don't duplicate code for each option. + */ + +static void __devinit velocity_set_bool_opt(u32 * opt, int val, int def, u32 flag, char *name, char *devname) +{ + (*opt) &= (~flag); + if (val == -1) + *opt |= (def ? flag : 0); + else if (val < 0 || val > 1) { + printk(KERN_NOTICE "%s: the value of parameter %s is invalid, the valid range is (0-1)\n", + devname, name); + *opt |= (def ? flag : 0); + } else { + printk(KERN_INFO "%s: set parameter %s to %s\n", + devname, name, val ? "TRUE" : "FALSE"); + *opt |= (val ? flag : 0); + } +} + +/** + * velocity_get_options - set options on device + * @opts: option structure for the device + * @index: index of option to use in module options array + * @devname: device name + * + * Turn the module and command options into a single structure + * for the current device + */ + +static void __devinit velocity_get_options(struct velocity_opt *opts, int index, char *devname) +{ + + velocity_set_int_opt(&opts->rx_thresh, rx_thresh[index], RX_THRESH_MIN, RX_THRESH_MAX, RX_THRESH_DEF, "rx_thresh", devname); + velocity_set_int_opt(&opts->DMA_length, DMA_length[index], DMA_LENGTH_MIN, DMA_LENGTH_MAX, DMA_LENGTH_DEF, "DMA_length", devname); + velocity_set_int_opt(&opts->numrx, RxDescriptors[index], RX_DESC_MIN, RX_DESC_MAX, RX_DESC_DEF, "RxDescriptors", devname); + velocity_set_int_opt(&opts->numtx, TxDescriptors[index], TX_DESC_MIN, TX_DESC_MAX, TX_DESC_DEF, "TxDescriptors", devname); + velocity_set_int_opt(&opts->vid, VID_setting[index], VLAN_ID_MIN, VLAN_ID_MAX, VLAN_ID_DEF, "VID_setting", devname); + velocity_set_bool_opt(&opts->flags, enable_tagging[index], TAGGING_DEF, VELOCITY_FLAGS_TAGGING, "enable_tagging", devname); + velocity_set_bool_opt(&opts->flags, txcsum_offload[index], TX_CSUM_DEF, VELOCITY_FLAGS_TX_CSUM, "txcsum_offload", devname); + velocity_set_int_opt(&opts->flow_cntl, flow_control[index], FLOW_CNTL_MIN, FLOW_CNTL_MAX, FLOW_CNTL_DEF, "flow_control", devname); + velocity_set_bool_opt(&opts->flags, IP_byte_align[index], IP_ALIG_DEF, VELOCITY_FLAGS_IP_ALIGN, "IP_byte_align", devname); + velocity_set_bool_opt(&opts->flags, ValPktLen[index], VAL_PKT_LEN_DEF, VELOCITY_FLAGS_VAL_PKT_LEN, "ValPktLen", devname); + velocity_set_int_opt((int *) &opts->spd_dpx, speed_duplex[index], MED_LNK_MIN, MED_LNK_MAX, MED_LNK_DEF, "Media link mode", devname); + velocity_set_int_opt((int *) &opts->wol_opts, wol_opts[index], WOL_OPT_MIN, WOL_OPT_MAX, WOL_OPT_DEF, "Wake On Lan options", devname); + velocity_set_int_opt((int *) &opts->int_works, int_works[index], INT_WORKS_MIN, INT_WORKS_MAX, INT_WORKS_DEF, "Interrupt service works", devname); + opts->numrx = (opts->numrx & ~3); +} + +/** + * velocity_init_cam_filter - initialise CAM + * @vptr: velocity to program + * + * Initialize the content addressable memory used for filters. Load + * appropriately according to the presence of VLAN + */ + +static void velocity_init_cam_filter(struct velocity_info *vptr) +{ + struct mac_regs __iomem * regs = vptr->mac_regs; + + /* Turn on MCFG_PQEN, turn off MCFG_RTGOPT */ + WORD_REG_BITS_SET(MCFG_PQEN, MCFG_RTGOPT, ®s->MCFG); + WORD_REG_BITS_ON(MCFG_VIDFR, ®s->MCFG); + + /* Disable all CAMs */ + memset(vptr->vCAMmask, 0, sizeof(u8) * 8); + memset(vptr->mCAMmask, 0, sizeof(u8) * 8); + mac_set_cam_mask(regs, vptr->vCAMmask, VELOCITY_VLAN_ID_CAM); + mac_set_cam_mask(regs, vptr->mCAMmask, VELOCITY_MULTICAST_CAM); + + /* Enable first VCAM */ + if (vptr->flags & VELOCITY_FLAGS_TAGGING) { + /* If Tagging option is enabled and VLAN ID is not zero, then + turn on MCFG_RTGOPT also */ + if (vptr->options.vid != 0) + WORD_REG_BITS_ON(MCFG_RTGOPT, ®s->MCFG); + + mac_set_cam(regs, 0, (u8 *) & (vptr->options.vid), VELOCITY_VLAN_ID_CAM); + vptr->vCAMmask[0] |= 1; + mac_set_cam_mask(regs, vptr->vCAMmask, VELOCITY_VLAN_ID_CAM); + } else { + u16 temp = 0; + mac_set_cam(regs, 0, (u8 *) &temp, VELOCITY_VLAN_ID_CAM); + temp = 1; + mac_set_cam_mask(regs, (u8 *) &temp, VELOCITY_VLAN_ID_CAM); + } +} + +/** + * velocity_rx_reset - handle a receive reset + * @vptr: velocity we are resetting + * + * Reset the ownership and status for the receive ring side. + * Hand all the receive queue to the NIC. + */ + +static void velocity_rx_reset(struct velocity_info *vptr) +{ + + struct mac_regs __iomem * regs = vptr->mac_regs; + int i; + + vptr->rd_dirty = vptr->rd_filled = vptr->rd_curr = 0; + + /* + * Init state, all RD entries belong to the NIC + */ + for (i = 0; i < vptr->options.numrx; ++i) + vptr->rd_ring[i].rdesc0.owner = OWNED_BY_NIC; + + writew(vptr->options.numrx, ®s->RBRDU); + writel(vptr->rd_pool_dma, ®s->RDBaseLo); + writew(0, ®s->RDIdx); + writew(vptr->options.numrx - 1, ®s->RDCSize); +} + +/** + * velocity_init_registers - initialise MAC registers + * @vptr: velocity to init + * @type: type of initialisation (hot or cold) + * + * Initialise the MAC on a reset or on first set up on the + * hardware. + */ + +static void velocity_init_registers(struct velocity_info *vptr, + enum velocity_init_type type) +{ + struct mac_regs __iomem * regs = vptr->mac_regs; + int i, mii_status; + + mac_wol_reset(regs); + + switch (type) { + case VELOCITY_INIT_RESET: + case VELOCITY_INIT_WOL: + + netif_stop_queue(vptr->dev); + + /* + * Reset RX to prevent RX pointer not on the 4X location + */ + velocity_rx_reset(vptr); + mac_rx_queue_run(regs); + mac_rx_queue_wake(regs); + + mii_status = velocity_get_opt_media_mode(vptr); + if (velocity_set_media_mode(vptr, mii_status) != VELOCITY_LINK_CHANGE) { + velocity_print_link_status(vptr); + if (!(vptr->mii_status & VELOCITY_LINK_FAIL)) + netif_wake_queue(vptr->dev); + } + + enable_flow_control_ability(vptr); + + mac_clear_isr(regs); + writel(CR0_STOP, ®s->CR0Clr); + writel((CR0_DPOLL | CR0_TXON | CR0_RXON | CR0_STRT), + ®s->CR0Set); + + break; + + case VELOCITY_INIT_COLD: + default: + /* + * Do reset + */ + velocity_soft_reset(vptr); + mdelay(5); + + mac_eeprom_reload(regs); + for (i = 0; i < 6; i++) { + writeb(vptr->dev->dev_addr[i], &(regs->PAR[i])); + } + /* + * clear Pre_ACPI bit. + */ + BYTE_REG_BITS_OFF(CFGA_PACPI, &(regs->CFGA)); + mac_set_rx_thresh(regs, vptr->options.rx_thresh); + mac_set_dma_length(regs, vptr->options.DMA_length); + + writeb(WOLCFG_SAM | WOLCFG_SAB, ®s->WOLCFGSet); + /* + * Back off algorithm use original IEEE standard + */ + BYTE_REG_BITS_SET(CFGB_OFSET, (CFGB_CRANDOM | CFGB_CAP | CFGB_MBA | CFGB_BAKOPT), ®s->CFGB); + + /* + * Init CAM filter + */ + velocity_init_cam_filter(vptr); + + /* + * Set packet filter: Receive directed and broadcast address + */ + velocity_set_multi(vptr->dev); + + /* + * Enable MII auto-polling + */ + enable_mii_autopoll(regs); + + vptr->int_mask = INT_MASK_DEF; + + writel(cpu_to_le32(vptr->rd_pool_dma), ®s->RDBaseLo); + writew(vptr->options.numrx - 1, ®s->RDCSize); + mac_rx_queue_run(regs); + mac_rx_queue_wake(regs); + + writew(vptr->options.numtx - 1, ®s->TDCSize); + + for (i = 0; i < vptr->num_txq; i++) { + writel(cpu_to_le32(vptr->td_pool_dma[i]), &(regs->TDBaseLo[i])); + mac_tx_queue_run(regs, i); + } + + init_flow_control_register(vptr); + + writel(CR0_STOP, ®s->CR0Clr); + writel((CR0_DPOLL | CR0_TXON | CR0_RXON | CR0_STRT), ®s->CR0Set); + + mii_status = velocity_get_opt_media_mode(vptr); + netif_stop_queue(vptr->dev); + + mii_init(vptr, mii_status); + + if (velocity_set_media_mode(vptr, mii_status) != VELOCITY_LINK_CHANGE) { + velocity_print_link_status(vptr); + if (!(vptr->mii_status & VELOCITY_LINK_FAIL)) + netif_wake_queue(vptr->dev); + } + + enable_flow_control_ability(vptr); + mac_hw_mibs_init(regs); + mac_write_int_mask(vptr->int_mask, regs); + mac_clear_isr(regs); + + } +} + +/** + * velocity_soft_reset - soft reset + * @vptr: velocity to reset + * + * Kick off a soft reset of the velocity adapter and then poll + * until the reset sequence has completed before returning. + */ + +static int velocity_soft_reset(struct velocity_info *vptr) +{ + struct mac_regs __iomem * regs = vptr->mac_regs; + int i = 0; + + writel(CR0_SFRST, ®s->CR0Set); + + for (i = 0; i < W_MAX_TIMEOUT; i++) { + udelay(5); + if (!DWORD_REG_BITS_IS_ON(CR0_SFRST, ®s->CR0Set)) + break; + } + + if (i == W_MAX_TIMEOUT) { + writel(CR0_FORSRST, ®s->CR0Set); + /* FIXME: PCI POSTING */ + /* delay 2ms */ + mdelay(2); + } + return 0; +} + +/** + * velocity_found1 - set up discovered velocity card + * @pdev: PCI device + * @ent: PCI device table entry that matched + * + * Configure a discovered adapter from scratch. Return a negative + * errno error code on failure paths. + */ + +static int __devinit velocity_found1(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + static int first = 1; + struct net_device *dev; + int i; + struct velocity_info_tbl *info = (struct velocity_info_tbl *) ent->driver_data; + struct velocity_info *vptr; + struct mac_regs __iomem * regs; + int ret = -ENOMEM; + + if (velocity_nics >= MAX_UNITS) { + printk(KERN_NOTICE VELOCITY_NAME ": already found %d NICs.\n", + velocity_nics); + return -ENODEV; + } + + dev = alloc_etherdev(sizeof(struct velocity_info)); + + if (dev == NULL) { + printk(KERN_ERR VELOCITY_NAME ": allocate net device failed.\n"); + goto out; + } + + /* Chain it all together */ + + SET_MODULE_OWNER(dev); + SET_NETDEV_DEV(dev, &pdev->dev); + vptr = dev->priv; + + + if (first) { + printk(KERN_INFO "%s Ver. %s\n", + VELOCITY_FULL_DRV_NAM, VELOCITY_VERSION); + printk(KERN_INFO "Copyright (c) 2002, 2003 VIA Networking Technologies, Inc.\n"); + printk(KERN_INFO "Copyright (c) 2004 Red Hat Inc.\n"); + first = 0; + } + + velocity_init_info(pdev, vptr, info); + + vptr->dev = dev; + + dev->irq = pdev->irq; + + ret = pci_enable_device(pdev); + if (ret < 0) + goto err_free_dev; + + ret = velocity_get_pci_info(vptr, pdev); + if (ret < 0) { + printk(KERN_ERR VELOCITY_NAME ": Failed to find PCI device.\n"); + goto err_disable; + } + + ret = pci_request_regions(pdev, VELOCITY_NAME); + if (ret < 0) { + printk(KERN_ERR VELOCITY_NAME ": Failed to find PCI device.\n"); + goto err_disable; + } + + regs = ioremap(vptr->memaddr, vptr->io_size); + if (regs == NULL) { + ret = -EIO; + goto err_release_res; + } + + vptr->mac_regs = regs; + + mac_wol_reset(regs); + + dev->base_addr = vptr->ioaddr; + + for (i = 0; i < 6; i++) + dev->dev_addr[i] = readb(®s->PAR[i]); + + + velocity_get_options(&vptr->options, velocity_nics, dev->name); + + /* + * Mask out the options cannot be set to the chip + */ + + vptr->options.flags &= info->flags; + + /* + * Enable the chip specified capbilities + */ + + vptr->flags = vptr->options.flags | (info->flags & 0xFF000000UL); + + vptr->wol_opts = vptr->options.wol_opts; + vptr->flags |= VELOCITY_FLAGS_WOL_ENABLED; + + vptr->phy_id = MII_GET_PHY_ID(vptr->mac_regs); + + dev->irq = pdev->irq; + dev->open = velocity_open; + dev->hard_start_xmit = velocity_xmit; + dev->stop = velocity_close; + dev->get_stats = velocity_get_stats; + dev->set_multicast_list = velocity_set_multi; + dev->do_ioctl = velocity_ioctl; + dev->ethtool_ops = &velocity_ethtool_ops; + dev->change_mtu = velocity_change_mtu; +#ifdef VELOCITY_ZERO_COPY_SUPPORT + dev->features |= NETIF_F_SG; +#endif + + if (vptr->flags & VELOCITY_FLAGS_TX_CSUM) { + dev->features |= NETIF_F_HW_CSUM; + } + + ret = register_netdev(dev); + if (ret < 0) + goto err_iounmap; + + velocity_print_info(vptr); + pci_set_drvdata(pdev, dev); + + /* and leave the chip powered down */ + + pci_set_power_state(pdev, PCI_D3hot); +#ifdef CONFIG_PM + { + unsigned long flags; + + spin_lock_irqsave(&velocity_dev_list_lock, flags); + list_add(&vptr->list, &velocity_dev_list); + spin_unlock_irqrestore(&velocity_dev_list_lock, flags); + } +#endif + velocity_nics++; +out: + return ret; + +err_iounmap: + iounmap(regs); +err_release_res: + pci_release_regions(pdev); +err_disable: + pci_disable_device(pdev); +err_free_dev: + free_netdev(dev); + goto out; +} + +/** + * velocity_print_info - per driver data + * @vptr: velocity + * + * Print per driver data as the kernel driver finds Velocity + * hardware + */ + +static void __devinit velocity_print_info(struct velocity_info *vptr) +{ + struct net_device *dev = vptr->dev; + + printk(KERN_INFO "%s: %s\n", dev->name, get_chip_name(vptr->chip_id)); + printk(KERN_INFO "%s: Ethernet Address: %2.2X:%2.2X:%2.2X:%2.2X:%2.2X:%2.2X\n", + dev->name, + dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2], + dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]); +} + +/** + * velocity_init_info - init private data + * @pdev: PCI device + * @vptr: Velocity info + * @info: Board type + * + * Set up the initial velocity_info struct for the device that has been + * discovered. + */ + +static void __devinit velocity_init_info(struct pci_dev *pdev, struct velocity_info *vptr, struct velocity_info_tbl *info) +{ + memset(vptr, 0, sizeof(struct velocity_info)); + + vptr->pdev = pdev; + vptr->chip_id = info->chip_id; + vptr->io_size = info->io_size; + vptr->num_txq = info->txqueue; + vptr->multicast_limit = MCAM_SIZE; + spin_lock_init(&vptr->lock); + INIT_LIST_HEAD(&vptr->list); +} + +/** + * velocity_get_pci_info - retrieve PCI info for device + * @vptr: velocity device + * @pdev: PCI device it matches + * + * Retrieve the PCI configuration space data that interests us from + * the kernel PCI layer + */ + +static int __devinit velocity_get_pci_info(struct velocity_info *vptr, struct pci_dev *pdev) +{ + + if(pci_read_config_byte(pdev, PCI_REVISION_ID, &vptr->rev_id) < 0) + return -EIO; + + pci_set_master(pdev); + + vptr->ioaddr = pci_resource_start(pdev, 0); + vptr->memaddr = pci_resource_start(pdev, 1); + + if(!(pci_resource_flags(pdev, 0) & IORESOURCE_IO)) + { + printk(KERN_ERR "%s: region #0 is not an I/O resource, aborting.\n", + pci_name(pdev)); + return -EINVAL; + } + + if((pci_resource_flags(pdev, 1) & IORESOURCE_IO)) + { + printk(KERN_ERR "%s: region #1 is an I/O resource, aborting.\n", + pci_name(pdev)); + return -EINVAL; + } + + if(pci_resource_len(pdev, 1) < 256) + { + printk(KERN_ERR "%s: region #1 is too small.\n", + pci_name(pdev)); + return -EINVAL; + } + vptr->pdev = pdev; + + return 0; +} + +/** + * velocity_init_rings - set up DMA rings + * @vptr: Velocity to set up + * + * Allocate PCI mapped DMA rings for the receive and transmit layer + * to use. + */ + +static int velocity_init_rings(struct velocity_info *vptr) +{ + int i; + unsigned int psize; + unsigned int tsize; + dma_addr_t pool_dma; + u8 *pool; + + /* + * Allocate all RD/TD rings a single pool + */ + + psize = vptr->options.numrx * sizeof(struct rx_desc) + + vptr->options.numtx * sizeof(struct tx_desc) * vptr->num_txq; + + /* + * pci_alloc_consistent() fulfills the requirement for 64 bytes + * alignment + */ + pool = pci_alloc_consistent(vptr->pdev, psize, &pool_dma); + + if (pool == NULL) { + printk(KERN_ERR "%s : DMA memory allocation failed.\n", + vptr->dev->name); + return -ENOMEM; + } + + memset(pool, 0, psize); + + vptr->rd_ring = (struct rx_desc *) pool; + + vptr->rd_pool_dma = pool_dma; + + tsize = vptr->options.numtx * PKT_BUF_SZ * vptr->num_txq; + vptr->tx_bufs = pci_alloc_consistent(vptr->pdev, tsize, + &vptr->tx_bufs_dma); + + if (vptr->tx_bufs == NULL) { + printk(KERN_ERR "%s: DMA memory allocation failed.\n", + vptr->dev->name); + pci_free_consistent(vptr->pdev, psize, pool, pool_dma); + return -ENOMEM; + } + + memset(vptr->tx_bufs, 0, vptr->options.numtx * PKT_BUF_SZ * vptr->num_txq); + + i = vptr->options.numrx * sizeof(struct rx_desc); + pool += i; + pool_dma += i; + for (i = 0; i < vptr->num_txq; i++) { + int offset = vptr->options.numtx * sizeof(struct tx_desc); + + vptr->td_pool_dma[i] = pool_dma; + vptr->td_rings[i] = (struct tx_desc *) pool; + pool += offset; + pool_dma += offset; + } + return 0; +} + +/** + * velocity_free_rings - free PCI ring pointers + * @vptr: Velocity to free from + * + * Clean up the PCI ring buffers allocated to this velocity. + */ + +static void velocity_free_rings(struct velocity_info *vptr) +{ + int size; + + size = vptr->options.numrx * sizeof(struct rx_desc) + + vptr->options.numtx * sizeof(struct tx_desc) * vptr->num_txq; + + pci_free_consistent(vptr->pdev, size, vptr->rd_ring, vptr->rd_pool_dma); + + size = vptr->options.numtx * PKT_BUF_SZ * vptr->num_txq; + + pci_free_consistent(vptr->pdev, size, vptr->tx_bufs, vptr->tx_bufs_dma); +} + +static inline void velocity_give_many_rx_descs(struct velocity_info *vptr) +{ + struct mac_regs __iomem *regs = vptr->mac_regs; + int avail, dirty, unusable; + + /* + * RD number must be equal to 4X per hardware spec + * (programming guide rev 1.20, p.13) + */ + if (vptr->rd_filled < 4) + return; + + wmb(); + + unusable = vptr->rd_filled & 0x0003; + dirty = vptr->rd_dirty - unusable; + for (avail = vptr->rd_filled & 0xfffc; avail; avail--) { + dirty = (dirty > 0) ? dirty - 1 : vptr->options.numrx - 1; + vptr->rd_ring[dirty].rdesc0.owner = OWNED_BY_NIC; + } + + writew(vptr->rd_filled & 0xfffc, ®s->RBRDU); + vptr->rd_filled = unusable; +} + +static int velocity_rx_refill(struct velocity_info *vptr) +{ + int dirty = vptr->rd_dirty, done = 0, ret = 0; + + do { + struct rx_desc *rd = vptr->rd_ring + dirty; + + /* Fine for an all zero Rx desc at init time as well */ + if (rd->rdesc0.owner == OWNED_BY_NIC) + break; + + if (!vptr->rd_info[dirty].skb) { + ret = velocity_alloc_rx_buf(vptr, dirty); + if (ret < 0) + break; + } + done++; + dirty = (dirty < vptr->options.numrx - 1) ? dirty + 1 : 0; + } while (dirty != vptr->rd_curr); + + if (done) { + vptr->rd_dirty = dirty; + vptr->rd_filled += done; + velocity_give_many_rx_descs(vptr); + } + + return ret; +} + +/** + * velocity_init_rd_ring - set up receive ring + * @vptr: velocity to configure + * + * Allocate and set up the receive buffers for each ring slot and + * assign them to the network adapter. + */ + +static int velocity_init_rd_ring(struct velocity_info *vptr) +{ + int ret = -ENOMEM; + unsigned int rsize = sizeof(struct velocity_rd_info) * + vptr->options.numrx; + + vptr->rd_info = kmalloc(rsize, GFP_KERNEL); + if(vptr->rd_info == NULL) + goto out; + memset(vptr->rd_info, 0, rsize); + + vptr->rd_filled = vptr->rd_dirty = vptr->rd_curr = 0; + + ret = velocity_rx_refill(vptr); + if (ret < 0) { + VELOCITY_PRT(MSG_LEVEL_ERR, KERN_ERR + "%s: failed to allocate RX buffer.\n", vptr->dev->name); + velocity_free_rd_ring(vptr); + } +out: + return ret; +} + +/** + * velocity_free_rd_ring - free receive ring + * @vptr: velocity to clean up + * + * Free the receive buffers for each ring slot and any + * attached socket buffers that need to go away. + */ + +static void velocity_free_rd_ring(struct velocity_info *vptr) +{ + int i; + + if (vptr->rd_info == NULL) + return; + + for (i = 0; i < vptr->options.numrx; i++) { + struct velocity_rd_info *rd_info = &(vptr->rd_info[i]); + + if (!rd_info->skb) + continue; + pci_unmap_single(vptr->pdev, rd_info->skb_dma, vptr->rx_buf_sz, + PCI_DMA_FROMDEVICE); + rd_info->skb_dma = (dma_addr_t) NULL; + + dev_kfree_skb(rd_info->skb); + rd_info->skb = NULL; + } + + kfree(vptr->rd_info); + vptr->rd_info = NULL; +} + +/** + * velocity_init_td_ring - set up transmit ring + * @vptr: velocity + * + * Set up the transmit ring and chain the ring pointers together. + * Returns zero on success or a negative posix errno code for + * failure. + */ + +static int velocity_init_td_ring(struct velocity_info *vptr) +{ + int i, j; + dma_addr_t curr; + struct tx_desc *td; + struct velocity_td_info *td_info; + unsigned int tsize = sizeof(struct velocity_td_info) * + vptr->options.numtx; + + /* Init the TD ring entries */ + for (j = 0; j < vptr->num_txq; j++) { + curr = vptr->td_pool_dma[j]; + + vptr->td_infos[j] = kmalloc(tsize, GFP_KERNEL); + if(vptr->td_infos[j] == NULL) + { + while(--j >= 0) + kfree(vptr->td_infos[j]); + return -ENOMEM; + } + memset(vptr->td_infos[j], 0, tsize); + + for (i = 0; i < vptr->options.numtx; i++, curr += sizeof(struct tx_desc)) { + td = &(vptr->td_rings[j][i]); + td_info = &(vptr->td_infos[j][i]); + td_info->buf = vptr->tx_bufs + + (j * vptr->options.numtx + i) * PKT_BUF_SZ; + td_info->buf_dma = vptr->tx_bufs_dma + + (j * vptr->options.numtx + i) * PKT_BUF_SZ; + } + vptr->td_tail[j] = vptr->td_curr[j] = vptr->td_used[j] = 0; + } + return 0; +} + +/* + * FIXME: could we merge this with velocity_free_tx_buf ? + */ + +static void velocity_free_td_ring_entry(struct velocity_info *vptr, + int q, int n) +{ + struct velocity_td_info * td_info = &(vptr->td_infos[q][n]); + int i; + + if (td_info == NULL) + return; + + if (td_info->skb) { + for (i = 0; i < td_info->nskb_dma; i++) + { + if (td_info->skb_dma[i]) { + pci_unmap_single(vptr->pdev, td_info->skb_dma[i], + td_info->skb->len, PCI_DMA_TODEVICE); + td_info->skb_dma[i] = (dma_addr_t) NULL; + } + } + dev_kfree_skb(td_info->skb); + td_info->skb = NULL; + } +} + +/** + * velocity_free_td_ring - free td ring + * @vptr: velocity + * + * Free up the transmit ring for this particular velocity adapter. + * We free the ring contents but not the ring itself. + */ + +static void velocity_free_td_ring(struct velocity_info *vptr) +{ + int i, j; + + for (j = 0; j < vptr->num_txq; j++) { + if (vptr->td_infos[j] == NULL) + continue; + for (i = 0; i < vptr->options.numtx; i++) { + velocity_free_td_ring_entry(vptr, j, i); + + } + if (vptr->td_infos[j]) { + kfree(vptr->td_infos[j]); + vptr->td_infos[j] = NULL; + } + } +} + +/** + * velocity_rx_srv - service RX interrupt + * @vptr: velocity + * @status: adapter status (unused) + * + * Walk the receive ring of the velocity adapter and remove + * any received packets from the receive queue. Hand the ring + * slots back to the adapter for reuse. + */ + +static int velocity_rx_srv(struct velocity_info *vptr, int status) +{ + struct net_device_stats *stats = &vptr->stats; + int rd_curr = vptr->rd_curr; + int works = 0; + + do { + struct rx_desc *rd = vptr->rd_ring + rd_curr; + + if (!vptr->rd_info[rd_curr].skb) + break; + + if (rd->rdesc0.owner == OWNED_BY_NIC) + break; + + rmb(); + + /* + * Don't drop CE or RL error frame although RXOK is off + */ + if ((rd->rdesc0.RSR & RSR_RXOK) || (!(rd->rdesc0.RSR & RSR_RXOK) && (rd->rdesc0.RSR & (RSR_CE | RSR_RL)))) { + if (velocity_receive_frame(vptr, rd_curr) < 0) + stats->rx_dropped++; + } else { + if (rd->rdesc0.RSR & RSR_CRC) + stats->rx_crc_errors++; + if (rd->rdesc0.RSR & RSR_FAE) + stats->rx_frame_errors++; + + stats->rx_dropped++; + } + + rd->inten = 1; + + vptr->dev->last_rx = jiffies; + + rd_curr++; + if (rd_curr >= vptr->options.numrx) + rd_curr = 0; + } while (++works <= 15); + + vptr->rd_curr = rd_curr; + + if (works > 0 && velocity_rx_refill(vptr) < 0) { + VELOCITY_PRT(MSG_LEVEL_ERR, KERN_ERR + "%s: rx buf allocation failure\n", vptr->dev->name); + } + + VAR_USED(stats); + return works; +} + +/** + * velocity_rx_csum - checksum process + * @rd: receive packet descriptor + * @skb: network layer packet buffer + * + * Process the status bits for the received packet and determine + * if the checksum was computed and verified by the hardware + */ + +static inline void velocity_rx_csum(struct rx_desc *rd, struct sk_buff *skb) +{ + skb->ip_summed = CHECKSUM_NONE; + + if (rd->rdesc1.CSM & CSM_IPKT) { + if (rd->rdesc1.CSM & CSM_IPOK) { + if ((rd->rdesc1.CSM & CSM_TCPKT) || + (rd->rdesc1.CSM & CSM_UDPKT)) { + if (!(rd->rdesc1.CSM & CSM_TUPOK)) { + return; + } + } + skb->ip_summed = CHECKSUM_UNNECESSARY; + } + } +} + +/** + * velocity_rx_copy - in place Rx copy for small packets + * @rx_skb: network layer packet buffer candidate + * @pkt_size: received data size + * @rd: receive packet descriptor + * @dev: network device + * + * Replace the current skb that is scheduled for Rx processing by a + * shorter, immediatly allocated skb, if the received packet is small + * enough. This function returns a negative value if the received + * packet is too big or if memory is exhausted. + */ +static inline int velocity_rx_copy(struct sk_buff **rx_skb, int pkt_size, + struct velocity_info *vptr) +{ + int ret = -1; + + if (pkt_size < rx_copybreak) { + struct sk_buff *new_skb; + + new_skb = dev_alloc_skb(pkt_size + 2); + if (new_skb) { + new_skb->dev = vptr->dev; + new_skb->ip_summed = rx_skb[0]->ip_summed; + + if (vptr->flags & VELOCITY_FLAGS_IP_ALIGN) + skb_reserve(new_skb, 2); + + memcpy(new_skb->data, rx_skb[0]->tail, pkt_size); + *rx_skb = new_skb; + ret = 0; + } + + } + return ret; +} + +/** + * velocity_iph_realign - IP header alignment + * @vptr: velocity we are handling + * @skb: network layer packet buffer + * @pkt_size: received data size + * + * Align IP header on a 2 bytes boundary. This behavior can be + * configured by the user. + */ +static inline void velocity_iph_realign(struct velocity_info *vptr, + struct sk_buff *skb, int pkt_size) +{ + /* FIXME - memmove ? */ + if (vptr->flags & VELOCITY_FLAGS_IP_ALIGN) { + int i; + + for (i = pkt_size; i >= 0; i--) + *(skb->data + i + 2) = *(skb->data + i); + skb_reserve(skb, 2); + } +} + +/** + * velocity_receive_frame - received packet processor + * @vptr: velocity we are handling + * @idx: ring index + * + * A packet has arrived. We process the packet and if appropriate + * pass the frame up the network stack + */ + +static int velocity_receive_frame(struct velocity_info *vptr, int idx) +{ + void (*pci_action)(struct pci_dev *, dma_addr_t, size_t, int); + struct net_device_stats *stats = &vptr->stats; + struct velocity_rd_info *rd_info = &(vptr->rd_info[idx]); + struct rx_desc *rd = &(vptr->rd_ring[idx]); + int pkt_len = rd->rdesc0.len; + struct sk_buff *skb; + + if (rd->rdesc0.RSR & (RSR_STP | RSR_EDP)) { + VELOCITY_PRT(MSG_LEVEL_VERBOSE, KERN_ERR " %s : the received frame span multple RDs.\n", vptr->dev->name); + stats->rx_length_errors++; + return -EINVAL; + } + + if (rd->rdesc0.RSR & RSR_MAR) + vptr->stats.multicast++; + + skb = rd_info->skb; + skb->dev = vptr->dev; + + pci_dma_sync_single_for_cpu(vptr->pdev, rd_info->skb_dma, + vptr->rx_buf_sz, PCI_DMA_FROMDEVICE); + + /* + * Drop frame not meeting IEEE 802.3 + */ + + if (vptr->flags & VELOCITY_FLAGS_VAL_PKT_LEN) { + if (rd->rdesc0.RSR & RSR_RL) { + stats->rx_length_errors++; + return -EINVAL; + } + } + + pci_action = pci_dma_sync_single_for_device; + + velocity_rx_csum(rd, skb); + + if (velocity_rx_copy(&skb, pkt_len, vptr) < 0) { + velocity_iph_realign(vptr, skb, pkt_len); + pci_action = pci_unmap_single; + rd_info->skb = NULL; + } + + pci_action(vptr->pdev, rd_info->skb_dma, vptr->rx_buf_sz, + PCI_DMA_FROMDEVICE); + + skb_put(skb, pkt_len - 4); + skb->protocol = eth_type_trans(skb, skb->dev); + + stats->rx_bytes += pkt_len; + netif_rx(skb); + + return 0; +} + +/** + * velocity_alloc_rx_buf - allocate aligned receive buffer + * @vptr: velocity + * @idx: ring index + * + * Allocate a new full sized buffer for the reception of a frame and + * map it into PCI space for the hardware to use. The hardware + * requires *64* byte alignment of the buffer which makes life + * less fun than would be ideal. + */ + +static int velocity_alloc_rx_buf(struct velocity_info *vptr, int idx) +{ + struct rx_desc *rd = &(vptr->rd_ring[idx]); + struct velocity_rd_info *rd_info = &(vptr->rd_info[idx]); + + rd_info->skb = dev_alloc_skb(vptr->rx_buf_sz + 64); + if (rd_info->skb == NULL) + return -ENOMEM; + + /* + * Do the gymnastics to get the buffer head for data at + * 64byte alignment. + */ + skb_reserve(rd_info->skb, (unsigned long) rd_info->skb->tail & 63); + rd_info->skb->dev = vptr->dev; + rd_info->skb_dma = pci_map_single(vptr->pdev, rd_info->skb->tail, vptr->rx_buf_sz, PCI_DMA_FROMDEVICE); + + /* + * Fill in the descriptor to match + */ + + *((u32 *) & (rd->rdesc0)) = 0; + rd->len = cpu_to_le32(vptr->rx_buf_sz); + rd->inten = 1; + rd->pa_low = cpu_to_le32(rd_info->skb_dma); + rd->pa_high = 0; + return 0; +} + +/** + * tx_srv - transmit interrupt service + * @vptr; Velocity + * @status: + * + * Scan the queues looking for transmitted packets that + * we can complete and clean up. Update any statistics as + * neccessary/ + */ + +static int velocity_tx_srv(struct velocity_info *vptr, u32 status) +{ + struct tx_desc *td; + int qnum; + int full = 0; + int idx; + int works = 0; + struct velocity_td_info *tdinfo; + struct net_device_stats *stats = &vptr->stats; + + for (qnum = 0; qnum < vptr->num_txq; qnum++) { + for (idx = vptr->td_tail[qnum]; vptr->td_used[qnum] > 0; + idx = (idx + 1) % vptr->options.numtx) { + + /* + * Get Tx Descriptor + */ + td = &(vptr->td_rings[qnum][idx]); + tdinfo = &(vptr->td_infos[qnum][idx]); + + if (td->tdesc0.owner == OWNED_BY_NIC) + break; + + if ((works++ > 15)) + break; + + if (td->tdesc0.TSR & TSR0_TERR) { + stats->tx_errors++; + stats->tx_dropped++; + if (td->tdesc0.TSR & TSR0_CDH) + stats->tx_heartbeat_errors++; + if (td->tdesc0.TSR & TSR0_CRS) + stats->tx_carrier_errors++; + if (td->tdesc0.TSR & TSR0_ABT) + stats->tx_aborted_errors++; + if (td->tdesc0.TSR & TSR0_OWC) + stats->tx_window_errors++; + } else { + stats->tx_packets++; + stats->tx_bytes += tdinfo->skb->len; + } + velocity_free_tx_buf(vptr, tdinfo); + vptr->td_used[qnum]--; + } + vptr->td_tail[qnum] = idx; + + if (AVAIL_TD(vptr, qnum) < 1) { + full = 1; + } + } + /* + * Look to see if we should kick the transmit network + * layer for more work. + */ + if (netif_queue_stopped(vptr->dev) && (full == 0) + && (!(vptr->mii_status & VELOCITY_LINK_FAIL))) { + netif_wake_queue(vptr->dev); + } + return works; +} + +/** + * velocity_print_link_status - link status reporting + * @vptr: velocity to report on + * + * Turn the link status of the velocity card into a kernel log + * description of the new link state, detailing speed and duplex + * status + */ + +static void velocity_print_link_status(struct velocity_info *vptr) +{ + + if (vptr->mii_status & VELOCITY_LINK_FAIL) { + VELOCITY_PRT(MSG_LEVEL_INFO, KERN_NOTICE "%s: failed to detect cable link\n", vptr->dev->name); + } else if (vptr->options.spd_dpx == SPD_DPX_AUTO) { + VELOCITY_PRT(MSG_LEVEL_INFO, KERN_NOTICE "%s: Link autonegation", vptr->dev->name); + + if (vptr->mii_status & VELOCITY_SPEED_1000) + VELOCITY_PRT(MSG_LEVEL_INFO, " speed 1000M bps"); + else if (vptr->mii_status & VELOCITY_SPEED_100) + VELOCITY_PRT(MSG_LEVEL_INFO, " speed 100M bps"); + else + VELOCITY_PRT(MSG_LEVEL_INFO, " speed 10M bps"); + + if (vptr->mii_status & VELOCITY_DUPLEX_FULL) + VELOCITY_PRT(MSG_LEVEL_INFO, " full duplex\n"); + else + VELOCITY_PRT(MSG_LEVEL_INFO, " half duplex\n"); + } else { + VELOCITY_PRT(MSG_LEVEL_INFO, KERN_NOTICE "%s: Link forced", vptr->dev->name); + switch (vptr->options.spd_dpx) { + case SPD_DPX_100_HALF: + VELOCITY_PRT(MSG_LEVEL_INFO, " speed 100M bps half duplex\n"); + break; + case SPD_DPX_100_FULL: + VELOCITY_PRT(MSG_LEVEL_INFO, " speed 100M bps full duplex\n"); + break; + case SPD_DPX_10_HALF: + VELOCITY_PRT(MSG_LEVEL_INFO, " speed 10M bps half duplex\n"); + break; + case SPD_DPX_10_FULL: + VELOCITY_PRT(MSG_LEVEL_INFO, " speed 10M bps full duplex\n"); + break; + default: + break; + } + } +} + +/** + * velocity_error - handle error from controller + * @vptr: velocity + * @status: card status + * + * Process an error report from the hardware and attempt to recover + * the card itself. At the moment we cannot recover from some + * theoretically impossible errors but this could be fixed using + * the pci_device_failed logic to bounce the hardware + * + */ + +static void velocity_error(struct velocity_info *vptr, int status) +{ + + if (status & ISR_TXSTLI) { + struct mac_regs __iomem * regs = vptr->mac_regs; + + printk(KERN_ERR "TD structure errror TDindex=%hx\n", readw(®s->TDIdx[0])); + BYTE_REG_BITS_ON(TXESR_TDSTR, ®s->TXESR); + writew(TRDCSR_RUN, ®s->TDCSRClr); + netif_stop_queue(vptr->dev); + + /* FIXME: port over the pci_device_failed code and use it + here */ + } + + if (status & ISR_SRCI) { + struct mac_regs __iomem * regs = vptr->mac_regs; + int linked; + + if (vptr->options.spd_dpx == SPD_DPX_AUTO) { + vptr->mii_status = check_connection_type(regs); + + /* + * If it is a 3119, disable frame bursting in + * halfduplex mode and enable it in fullduplex + * mode + */ + if (vptr->rev_id < REV_ID_VT3216_A0) { + if (vptr->mii_status | VELOCITY_DUPLEX_FULL) + BYTE_REG_BITS_ON(TCR_TB2BDIS, ®s->TCR); + else + BYTE_REG_BITS_OFF(TCR_TB2BDIS, ®s->TCR); + } + /* + * Only enable CD heart beat counter in 10HD mode + */ + if (!(vptr->mii_status & VELOCITY_DUPLEX_FULL) && (vptr->mii_status & VELOCITY_SPEED_10)) { + BYTE_REG_BITS_OFF(TESTCFG_HBDIS, ®s->TESTCFG); + } else { + BYTE_REG_BITS_ON(TESTCFG_HBDIS, ®s->TESTCFG); + } + } + /* + * Get link status from PHYSR0 + */ + linked = readb(®s->PHYSR0) & PHYSR0_LINKGD; + + if (linked) { + vptr->mii_status &= ~VELOCITY_LINK_FAIL; + } else { + vptr->mii_status |= VELOCITY_LINK_FAIL; + } + + velocity_print_link_status(vptr); + enable_flow_control_ability(vptr); + + /* + * Re-enable auto-polling because SRCI will disable + * auto-polling + */ + + enable_mii_autopoll(regs); + + if (vptr->mii_status & VELOCITY_LINK_FAIL) + netif_stop_queue(vptr->dev); + else + netif_wake_queue(vptr->dev); + + }; + if (status & ISR_MIBFI) + velocity_update_hw_mibs(vptr); + if (status & ISR_LSTEI) + mac_rx_queue_wake(vptr->mac_regs); +} + +/** + * velocity_free_tx_buf - free transmit buffer + * @vptr: velocity + * @tdinfo: buffer + * + * Release an transmit buffer. If the buffer was preallocated then + * recycle it, if not then unmap the buffer. + */ + +static void velocity_free_tx_buf(struct velocity_info *vptr, struct velocity_td_info *tdinfo) +{ + struct sk_buff *skb = tdinfo->skb; + int i; + + /* + * Don't unmap the pre-allocated tx_bufs + */ + if (tdinfo->skb_dma && (tdinfo->skb_dma[0] != tdinfo->buf_dma)) { + + for (i = 0; i < tdinfo->nskb_dma; i++) { +#ifdef VELOCITY_ZERO_COPY_SUPPORT + pci_unmap_single(vptr->pdev, tdinfo->skb_dma[i], td->tdesc1.len, PCI_DMA_TODEVICE); +#else + pci_unmap_single(vptr->pdev, tdinfo->skb_dma[i], skb->len, PCI_DMA_TODEVICE); +#endif + tdinfo->skb_dma[i] = 0; + } + } + dev_kfree_skb_irq(skb); + tdinfo->skb = NULL; +} + +/** + * velocity_open - interface activation callback + * @dev: network layer device to open + * + * Called when the network layer brings the interface up. Returns + * a negative posix error code on failure, or zero on success. + * + * All the ring allocation and set up is done on open for this + * adapter to minimise memory usage when inactive + */ + +static int velocity_open(struct net_device *dev) +{ + struct velocity_info *vptr = dev->priv; + int ret; + + vptr->rx_buf_sz = (dev->mtu <= 1504 ? PKT_BUF_SZ : dev->mtu + 32); + + ret = velocity_init_rings(vptr); + if (ret < 0) + goto out; + + ret = velocity_init_rd_ring(vptr); + if (ret < 0) + goto err_free_desc_rings; + + ret = velocity_init_td_ring(vptr); + if (ret < 0) + goto err_free_rd_ring; + + /* Ensure chip is running */ + pci_set_power_state(vptr->pdev, PCI_D0); + + velocity_init_registers(vptr, VELOCITY_INIT_COLD); + + ret = request_irq(vptr->pdev->irq, &velocity_intr, SA_SHIRQ, + dev->name, dev); + if (ret < 0) { + /* Power down the chip */ + pci_set_power_state(vptr->pdev, PCI_D3hot); + goto err_free_td_ring; + } + + mac_enable_int(vptr->mac_regs); + netif_start_queue(dev); + vptr->flags |= VELOCITY_FLAGS_OPENED; +out: + return ret; + +err_free_td_ring: + velocity_free_td_ring(vptr); +err_free_rd_ring: + velocity_free_rd_ring(vptr); +err_free_desc_rings: + velocity_free_rings(vptr); + goto out; +} + +/** + * velocity_change_mtu - MTU change callback + * @dev: network device + * @new_mtu: desired MTU + * + * Handle requests from the networking layer for MTU change on + * this interface. It gets called on a change by the network layer. + * Return zero for success or negative posix error code. + */ + +static int velocity_change_mtu(struct net_device *dev, int new_mtu) +{ + struct velocity_info *vptr = dev->priv; + unsigned long flags; + int oldmtu = dev->mtu; + int ret = 0; + + if ((new_mtu < VELOCITY_MIN_MTU) || new_mtu > (VELOCITY_MAX_MTU)) { + VELOCITY_PRT(MSG_LEVEL_ERR, KERN_NOTICE "%s: Invalid MTU.\n", + vptr->dev->name); + return -EINVAL; + } + + if (new_mtu != oldmtu) { + spin_lock_irqsave(&vptr->lock, flags); + + netif_stop_queue(dev); + velocity_shutdown(vptr); + + velocity_free_td_ring(vptr); + velocity_free_rd_ring(vptr); + + dev->mtu = new_mtu; + if (new_mtu > 8192) + vptr->rx_buf_sz = 9 * 1024; + else if (new_mtu > 4096) + vptr->rx_buf_sz = 8192; + else + vptr->rx_buf_sz = 4 * 1024; + + ret = velocity_init_rd_ring(vptr); + if (ret < 0) + goto out_unlock; + + ret = velocity_init_td_ring(vptr); + if (ret < 0) + goto out_unlock; + + velocity_init_registers(vptr, VELOCITY_INIT_COLD); + + mac_enable_int(vptr->mac_regs); + netif_start_queue(dev); +out_unlock: + spin_unlock_irqrestore(&vptr->lock, flags); + } + + return ret; +} + +/** + * velocity_shutdown - shut down the chip + * @vptr: velocity to deactivate + * + * Shuts down the internal operations of the velocity and + * disables interrupts, autopolling, transmit and receive + */ + +static void velocity_shutdown(struct velocity_info *vptr) +{ + struct mac_regs __iomem * regs = vptr->mac_regs; + mac_disable_int(regs); + writel(CR0_STOP, ®s->CR0Set); + writew(0xFFFF, ®s->TDCSRClr); + writeb(0xFF, ®s->RDCSRClr); + safe_disable_mii_autopoll(regs); + mac_clear_isr(regs); +} + +/** + * velocity_close - close adapter callback + * @dev: network device + * + * Callback from the network layer when the velocity is being + * deactivated by the network layer + */ + +static int velocity_close(struct net_device *dev) +{ + struct velocity_info *vptr = dev->priv; + + netif_stop_queue(dev); + velocity_shutdown(vptr); + + if (vptr->flags & VELOCITY_FLAGS_WOL_ENABLED) + velocity_get_ip(vptr); + if (dev->irq != 0) + free_irq(dev->irq, dev); + + /* Power down the chip */ + pci_set_power_state(vptr->pdev, PCI_D3hot); + + /* Free the resources */ + velocity_free_td_ring(vptr); + velocity_free_rd_ring(vptr); + velocity_free_rings(vptr); + + vptr->flags &= (~VELOCITY_FLAGS_OPENED); + return 0; +} + +/** + * velocity_xmit - transmit packet callback + * @skb: buffer to transmit + * @dev: network device + * + * Called by the networ layer to request a packet is queued to + * the velocity. Returns zero on success. + */ + +static int velocity_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct velocity_info *vptr = dev->priv; + int qnum = 0; + struct tx_desc *td_ptr; + struct velocity_td_info *tdinfo; + unsigned long flags; + int index; + + int pktlen = skb->len; + + spin_lock_irqsave(&vptr->lock, flags); + + index = vptr->td_curr[qnum]; + td_ptr = &(vptr->td_rings[qnum][index]); + tdinfo = &(vptr->td_infos[qnum][index]); + + td_ptr->tdesc1.TCPLS = TCPLS_NORMAL; + td_ptr->tdesc1.TCR = TCR0_TIC; + td_ptr->td_buf[0].queue = 0; + + /* + * Pad short frames. + */ + if (pktlen < ETH_ZLEN) { + /* Cannot occur until ZC support */ + if(skb_linearize(skb, GFP_ATOMIC)) + return 0; + pktlen = ETH_ZLEN; + memcpy(tdinfo->buf, skb->data, skb->len); + memset(tdinfo->buf + skb->len, 0, ETH_ZLEN - skb->len); + tdinfo->skb = skb; + tdinfo->skb_dma[0] = tdinfo->buf_dma; + td_ptr->tdesc0.pktsize = pktlen; + td_ptr->td_buf[0].pa_low = cpu_to_le32(tdinfo->skb_dma[0]); + td_ptr->td_buf[0].pa_high = 0; + td_ptr->td_buf[0].bufsize = td_ptr->tdesc0.pktsize; + tdinfo->nskb_dma = 1; + td_ptr->tdesc1.CMDZ = 2; + } else +#ifdef VELOCITY_ZERO_COPY_SUPPORT + if (skb_shinfo(skb)->nr_frags > 0) { + int nfrags = skb_shinfo(skb)->nr_frags; + tdinfo->skb = skb; + if (nfrags > 6) { + skb_linearize(skb, GFP_ATOMIC); + memcpy(tdinfo->buf, skb->data, skb->len); + tdinfo->skb_dma[0] = tdinfo->buf_dma; + td_ptr->tdesc0.pktsize = + td_ptr->td_buf[0].pa_low = cpu_to_le32(tdinfo->skb_dma[0]); + td_ptr->td_buf[0].pa_high = 0; + td_ptr->td_buf[0].bufsize = td_ptr->tdesc0.pktsize; + tdinfo->nskb_dma = 1; + td_ptr->tdesc1.CMDZ = 2; + } else { + int i = 0; + tdinfo->nskb_dma = 0; + tdinfo->skb_dma[i] = pci_map_single(vptr->pdev, skb->data, skb->len - skb->data_len, PCI_DMA_TODEVICE); + + td_ptr->tdesc0.pktsize = pktlen; + + /* FIXME: support 48bit DMA later */ + td_ptr->td_buf[i].pa_low = cpu_to_le32(tdinfo->skb_dma); + td_ptr->td_buf[i].pa_high = 0; + td_ptr->td_buf[i].bufsize = skb->len->skb->data_len; + + for (i = 0; i < nfrags; i++) { + skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; + void *addr = ((void *) page_address(frag->page + frag->page_offset)); + + tdinfo->skb_dma[i + 1] = pci_map_single(vptr->pdev, addr, frag->size, PCI_DMA_TODEVICE); + + td_ptr->td_buf[i + 1].pa_low = cpu_to_le32(tdinfo->skb_dma[i + 1]); + td_ptr->td_buf[i + 1].pa_high = 0; + td_ptr->td_buf[i + 1].bufsize = frag->size; + } + tdinfo->nskb_dma = i - 1; + td_ptr->tdesc1.CMDZ = i; + } + + } else +#endif + { + /* + * Map the linear network buffer into PCI space and + * add it to the transmit ring. + */ + tdinfo->skb = skb; + tdinfo->skb_dma[0] = pci_map_single(vptr->pdev, skb->data, pktlen, PCI_DMA_TODEVICE); + td_ptr->tdesc0.pktsize = pktlen; + td_ptr->td_buf[0].pa_low = cpu_to_le32(tdinfo->skb_dma[0]); + td_ptr->td_buf[0].pa_high = 0; + td_ptr->td_buf[0].bufsize = td_ptr->tdesc0.pktsize; + tdinfo->nskb_dma = 1; + td_ptr->tdesc1.CMDZ = 2; + } + + if (vptr->flags & VELOCITY_FLAGS_TAGGING) { + td_ptr->tdesc1.pqinf.VID = (vptr->options.vid & 0xfff); + td_ptr->tdesc1.pqinf.priority = 0; + td_ptr->tdesc1.pqinf.CFI = 0; + td_ptr->tdesc1.TCR |= TCR0_VETAG; + } + + /* + * Handle hardware checksum + */ + if ((vptr->flags & VELOCITY_FLAGS_TX_CSUM) + && (skb->ip_summed == CHECKSUM_HW)) { + struct iphdr *ip = skb->nh.iph; + if (ip->protocol == IPPROTO_TCP) + td_ptr->tdesc1.TCR |= TCR0_TCPCK; + else if (ip->protocol == IPPROTO_UDP) + td_ptr->tdesc1.TCR |= (TCR0_UDPCK); + td_ptr->tdesc1.TCR |= TCR0_IPCK; + } + { + + int prev = index - 1; + + if (prev < 0) + prev = vptr->options.numtx - 1; + td_ptr->tdesc0.owner = OWNED_BY_NIC; + vptr->td_used[qnum]++; + vptr->td_curr[qnum] = (index + 1) % vptr->options.numtx; + + if (AVAIL_TD(vptr, qnum) < 1) + netif_stop_queue(dev); + + td_ptr = &(vptr->td_rings[qnum][prev]); + td_ptr->td_buf[0].queue = 1; + mac_tx_queue_wake(vptr->mac_regs, qnum); + } + dev->trans_start = jiffies; + spin_unlock_irqrestore(&vptr->lock, flags); + return 0; +} + +/** + * velocity_intr - interrupt callback + * @irq: interrupt number + * @dev_instance: interrupting device + * @pt_regs: CPU register state at interrupt + * + * Called whenever an interrupt is generated by the velocity + * adapter IRQ line. We may not be the source of the interrupt + * and need to identify initially if we are, and if not exit as + * efficiently as possible. + */ + +static int velocity_intr(int irq, void *dev_instance, struct pt_regs *regs) +{ + struct net_device *dev = dev_instance; + struct velocity_info *vptr = dev->priv; + u32 isr_status; + int max_count = 0; + + + spin_lock(&vptr->lock); + isr_status = mac_read_isr(vptr->mac_regs); + + /* Not us ? */ + if (isr_status == 0) { + spin_unlock(&vptr->lock); + return IRQ_NONE; + } + + mac_disable_int(vptr->mac_regs); + + /* + * Keep processing the ISR until we have completed + * processing and the isr_status becomes zero + */ + + while (isr_status != 0) { + mac_write_isr(vptr->mac_regs, isr_status); + if (isr_status & (~(ISR_PRXI | ISR_PPRXI | ISR_PTXI | ISR_PPTXI))) + velocity_error(vptr, isr_status); + if (isr_status & (ISR_PRXI | ISR_PPRXI)) + max_count += velocity_rx_srv(vptr, isr_status); + if (isr_status & (ISR_PTXI | ISR_PPTXI)) + max_count += velocity_tx_srv(vptr, isr_status); + isr_status = mac_read_isr(vptr->mac_regs); + if (max_count > vptr->options.int_works) + { + printk(KERN_WARNING "%s: excessive work at interrupt.\n", + dev->name); + max_count = 0; + } + } + spin_unlock(&vptr->lock); + mac_enable_int(vptr->mac_regs); + return IRQ_HANDLED; + +} + + +/** + * velocity_set_multi - filter list change callback + * @dev: network device + * + * Called by the network layer when the filter lists need to change + * for a velocity adapter. Reload the CAMs with the new address + * filter ruleset. + */ + +static void velocity_set_multi(struct net_device *dev) +{ + struct velocity_info *vptr = dev->priv; + struct mac_regs __iomem * regs = vptr->mac_regs; + u8 rx_mode; + int i; + struct dev_mc_list *mclist; + + if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */ + /* Unconditionally log net taps. */ + printk(KERN_NOTICE "%s: Promiscuous mode enabled.\n", dev->name); + writel(0xffffffff, ®s->MARCAM[0]); + writel(0xffffffff, ®s->MARCAM[4]); + rx_mode = (RCR_AM | RCR_AB | RCR_PROM); + } else if ((dev->mc_count > vptr->multicast_limit) + || (dev->flags & IFF_ALLMULTI)) { + writel(0xffffffff, ®s->MARCAM[0]); + writel(0xffffffff, ®s->MARCAM[4]); + rx_mode = (RCR_AM | RCR_AB); + } else { + int offset = MCAM_SIZE - vptr->multicast_limit; + mac_get_cam_mask(regs, vptr->mCAMmask, VELOCITY_MULTICAST_CAM); + + for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count; i++, mclist = mclist->next) { + mac_set_cam(regs, i + offset, mclist->dmi_addr, VELOCITY_MULTICAST_CAM); + vptr->mCAMmask[(offset + i) / 8] |= 1 << ((offset + i) & 7); + } + + mac_set_cam_mask(regs, vptr->mCAMmask, VELOCITY_MULTICAST_CAM); + rx_mode = (RCR_AM | RCR_AB); + } + if (dev->mtu > 1500) + rx_mode |= RCR_AL; + + BYTE_REG_BITS_ON(rx_mode, ®s->RCR); + +} + +/** + * velocity_get_status - statistics callback + * @dev: network device + * + * Callback from the network layer to allow driver statistics + * to be resynchronized with hardware collected state. In the + * case of the velocity we need to pull the MIB counters from + * the hardware into the counters before letting the network + * layer display them. + */ + +static struct net_device_stats *velocity_get_stats(struct net_device *dev) +{ + struct velocity_info *vptr = dev->priv; + + /* If the hardware is down, don't touch MII */ + if(!netif_running(dev)) + return &vptr->stats; + + spin_lock_irq(&vptr->lock); + velocity_update_hw_mibs(vptr); + spin_unlock_irq(&vptr->lock); + + vptr->stats.rx_packets = vptr->mib_counter[HW_MIB_ifRxAllPkts]; + vptr->stats.rx_errors = vptr->mib_counter[HW_MIB_ifRxErrorPkts]; + vptr->stats.rx_length_errors = vptr->mib_counter[HW_MIB_ifInRangeLengthErrors]; + +// unsigned long rx_dropped; /* no space in linux buffers */ + vptr->stats.collisions = vptr->mib_counter[HW_MIB_ifTxEtherCollisions]; + /* detailed rx_errors: */ +// unsigned long rx_length_errors; +// unsigned long rx_over_errors; /* receiver ring buff overflow */ + vptr->stats.rx_crc_errors = vptr->mib_counter[HW_MIB_ifRxPktCRCE]; +// unsigned long rx_frame_errors; /* recv'd frame alignment error */ +// unsigned long rx_fifo_errors; /* recv'r fifo overrun */ +// unsigned long rx_missed_errors; /* receiver missed packet */ + + /* detailed tx_errors */ +// unsigned long tx_fifo_errors; + + return &vptr->stats; +} + + +/** + * velocity_ioctl - ioctl entry point + * @dev: network device + * @rq: interface request ioctl + * @cmd: command code + * + * Called when the user issues an ioctl request to the network + * device in question. The velocity interface supports MII. + */ + +static int velocity_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) +{ + struct velocity_info *vptr = dev->priv; + int ret; + + /* If we are asked for information and the device is power + saving then we need to bring the device back up to talk to it */ + + if (!netif_running(dev)) + pci_set_power_state(vptr->pdev, PCI_D0); + + switch (cmd) { + case SIOCGMIIPHY: /* Get address of MII PHY in use. */ + case SIOCGMIIREG: /* Read MII PHY register. */ + case SIOCSMIIREG: /* Write to MII PHY register. */ + ret = velocity_mii_ioctl(dev, rq, cmd); + break; + + default: + ret = -EOPNOTSUPP; + } + if (!netif_running(dev)) + pci_set_power_state(vptr->pdev, PCI_D3hot); + + + return ret; +} + +/* + * Definition for our device driver. The PCI layer interface + * uses this to handle all our card discover and plugging + */ + +static struct pci_driver velocity_driver = { + .name = VELOCITY_NAME, + .id_table = velocity_id_table, + .probe = velocity_found1, + .remove = __devexit_p(velocity_remove1), +#ifdef CONFIG_PM + .suspend = velocity_suspend, + .resume = velocity_resume, +#endif +}; + +/** + * velocity_init_module - load time function + * + * Called when the velocity module is loaded. The PCI driver + * is registered with the PCI layer, and in turn will call + * the probe functions for each velocity adapter installed + * in the system. + */ + +static int __init velocity_init_module(void) +{ + int ret; + + velocity_register_notifier(); + ret = pci_module_init(&velocity_driver); + if (ret < 0) + velocity_unregister_notifier(); + return ret; +} + +/** + * velocity_cleanup - module unload + * + * When the velocity hardware is unloaded this function is called. + * It will clean up the notifiers and the unregister the PCI + * driver interface for this hardware. This in turn cleans up + * all discovered interfaces before returning from the function + */ + +static void __exit velocity_cleanup_module(void) +{ + velocity_unregister_notifier(); + pci_unregister_driver(&velocity_driver); +} + +module_init(velocity_init_module); +module_exit(velocity_cleanup_module); + + +/* + * MII access , media link mode setting functions + */ + + +/** + * mii_init - set up MII + * @vptr: velocity adapter + * @mii_status: links tatus + * + * Set up the PHY for the current link state. + */ + +static void mii_init(struct velocity_info *vptr, u32 mii_status) +{ + u16 BMCR; + + switch (PHYID_GET_PHY_ID(vptr->phy_id)) { + case PHYID_CICADA_CS8201: + /* + * Reset to hardware default + */ + MII_REG_BITS_OFF((ANAR_ASMDIR | ANAR_PAUSE), MII_REG_ANAR, vptr->mac_regs); + /* + * Turn on ECHODIS bit in NWay-forced full mode and turn it + * off it in NWay-forced half mode for NWay-forced v.s. + * legacy-forced issue. + */ + if (vptr->mii_status & VELOCITY_DUPLEX_FULL) + MII_REG_BITS_ON(TCSR_ECHODIS, MII_REG_TCSR, vptr->mac_regs); + else + MII_REG_BITS_OFF(TCSR_ECHODIS, MII_REG_TCSR, vptr->mac_regs); + /* + * Turn on Link/Activity LED enable bit for CIS8201 + */ + MII_REG_BITS_ON(PLED_LALBE, MII_REG_PLED, vptr->mac_regs); + break; + case PHYID_VT3216_32BIT: + case PHYID_VT3216_64BIT: + /* + * Reset to hardware default + */ + MII_REG_BITS_ON((ANAR_ASMDIR | ANAR_PAUSE), MII_REG_ANAR, vptr->mac_regs); + /* + * Turn on ECHODIS bit in NWay-forced full mode and turn it + * off it in NWay-forced half mode for NWay-forced v.s. + * legacy-forced issue + */ + if (vptr->mii_status & VELOCITY_DUPLEX_FULL) + MII_REG_BITS_ON(TCSR_ECHODIS, MII_REG_TCSR, vptr->mac_regs); + else + MII_REG_BITS_OFF(TCSR_ECHODIS, MII_REG_TCSR, vptr->mac_regs); + break; + + case PHYID_MARVELL_1000: + case PHYID_MARVELL_1000S: + /* + * Assert CRS on Transmit + */ + MII_REG_BITS_ON(PSCR_ACRSTX, MII_REG_PSCR, vptr->mac_regs); + /* + * Reset to hardware default + */ + MII_REG_BITS_ON((ANAR_ASMDIR | ANAR_PAUSE), MII_REG_ANAR, vptr->mac_regs); + break; + default: + ; + } + velocity_mii_read(vptr->mac_regs, MII_REG_BMCR, &BMCR); + if (BMCR & BMCR_ISO) { + BMCR &= ~BMCR_ISO; + velocity_mii_write(vptr->mac_regs, MII_REG_BMCR, BMCR); + } +} + +/** + * safe_disable_mii_autopoll - autopoll off + * @regs: velocity registers + * + * Turn off the autopoll and wait for it to disable on the chip + */ + +static void safe_disable_mii_autopoll(struct mac_regs __iomem * regs) +{ + u16 ww; + + /* turn off MAUTO */ + writeb(0, ®s->MIICR); + for (ww = 0; ww < W_MAX_TIMEOUT; ww++) { + udelay(1); + if (BYTE_REG_BITS_IS_ON(MIISR_MIDLE, ®s->MIISR)) + break; + } +} + +/** + * enable_mii_autopoll - turn on autopolling + * @regs: velocity registers + * + * Enable the MII link status autopoll feature on the Velocity + * hardware. Wait for it to enable. + */ + +static void enable_mii_autopoll(struct mac_regs __iomem * regs) +{ + int ii; + + writeb(0, &(regs->MIICR)); + writeb(MIIADR_SWMPL, ®s->MIIADR); + + for (ii = 0; ii < W_MAX_TIMEOUT; ii++) { + udelay(1); + if (BYTE_REG_BITS_IS_ON(MIISR_MIDLE, ®s->MIISR)) + break; + } + + writeb(MIICR_MAUTO, ®s->MIICR); + + for (ii = 0; ii < W_MAX_TIMEOUT; ii++) { + udelay(1); + if (!BYTE_REG_BITS_IS_ON(MIISR_MIDLE, ®s->MIISR)) + break; + } + +} + +/** + * velocity_mii_read - read MII data + * @regs: velocity registers + * @index: MII register index + * @data: buffer for received data + * + * Perform a single read of an MII 16bit register. Returns zero + * on success or -ETIMEDOUT if the PHY did not respond. + */ + +static int velocity_mii_read(struct mac_regs __iomem *regs, u8 index, u16 *data) +{ + u16 ww; + + /* + * Disable MIICR_MAUTO, so that mii addr can be set normally + */ + safe_disable_mii_autopoll(regs); + + writeb(index, ®s->MIIADR); + + BYTE_REG_BITS_ON(MIICR_RCMD, ®s->MIICR); + + for (ww = 0; ww < W_MAX_TIMEOUT; ww++) { + if (!(readb(®s->MIICR) & MIICR_RCMD)) + break; + } + + *data = readw(®s->MIIDATA); + + enable_mii_autopoll(regs); + if (ww == W_MAX_TIMEOUT) + return -ETIMEDOUT; + return 0; +} + +/** + * velocity_mii_write - write MII data + * @regs: velocity registers + * @index: MII register index + * @data: 16bit data for the MII register + * + * Perform a single write to an MII 16bit register. Returns zero + * on success or -ETIMEDOUT if the PHY did not respond. + */ + +static int velocity_mii_write(struct mac_regs __iomem *regs, u8 mii_addr, u16 data) +{ + u16 ww; + + /* + * Disable MIICR_MAUTO, so that mii addr can be set normally + */ + safe_disable_mii_autopoll(regs); + + /* MII reg offset */ + writeb(mii_addr, ®s->MIIADR); + /* set MII data */ + writew(data, ®s->MIIDATA); + + /* turn on MIICR_WCMD */ + BYTE_REG_BITS_ON(MIICR_WCMD, ®s->MIICR); + + /* W_MAX_TIMEOUT is the timeout period */ + for (ww = 0; ww < W_MAX_TIMEOUT; ww++) { + udelay(5); + if (!(readb(®s->MIICR) & MIICR_WCMD)) + break; + } + enable_mii_autopoll(regs); + + if (ww == W_MAX_TIMEOUT) + return -ETIMEDOUT; + return 0; +} + +/** + * velocity_get_opt_media_mode - get media selection + * @vptr: velocity adapter + * + * Get the media mode stored in EEPROM or module options and load + * mii_status accordingly. The requested link state information + * is also returned. + */ + +static u32 velocity_get_opt_media_mode(struct velocity_info *vptr) +{ + u32 status = 0; + + switch (vptr->options.spd_dpx) { + case SPD_DPX_AUTO: + status = VELOCITY_AUTONEG_ENABLE; + break; + case SPD_DPX_100_FULL: + status = VELOCITY_SPEED_100 | VELOCITY_DUPLEX_FULL; + break; + case SPD_DPX_10_FULL: + status = VELOCITY_SPEED_10 | VELOCITY_DUPLEX_FULL; + break; + case SPD_DPX_100_HALF: + status = VELOCITY_SPEED_100; + break; + case SPD_DPX_10_HALF: + status = VELOCITY_SPEED_10; + break; + } + vptr->mii_status = status; + return status; +} + +/** + * mii_set_auto_on - autonegotiate on + * @vptr: velocity + * + * Enable autonegotation on this interface + */ + +static void mii_set_auto_on(struct velocity_info *vptr) +{ + if (MII_REG_BITS_IS_ON(BMCR_AUTO, MII_REG_BMCR, vptr->mac_regs)) + MII_REG_BITS_ON(BMCR_REAUTO, MII_REG_BMCR, vptr->mac_regs); + else + MII_REG_BITS_ON(BMCR_AUTO, MII_REG_BMCR, vptr->mac_regs); +} + + +/* +static void mii_set_auto_off(struct velocity_info * vptr) +{ + MII_REG_BITS_OFF(BMCR_AUTO, MII_REG_BMCR, vptr->mac_regs); +} +*/ + +/** + * set_mii_flow_control - flow control setup + * @vptr: velocity interface + * + * Set up the flow control on this interface according to + * the supplied user/eeprom options. + */ + +static void set_mii_flow_control(struct velocity_info *vptr) +{ + /*Enable or Disable PAUSE in ANAR */ + switch (vptr->options.flow_cntl) { + case FLOW_CNTL_TX: + MII_REG_BITS_OFF(ANAR_PAUSE, MII_REG_ANAR, vptr->mac_regs); + MII_REG_BITS_ON(ANAR_ASMDIR, MII_REG_ANAR, vptr->mac_regs); + break; + + case FLOW_CNTL_RX: + MII_REG_BITS_ON(ANAR_PAUSE, MII_REG_ANAR, vptr->mac_regs); + MII_REG_BITS_ON(ANAR_ASMDIR, MII_REG_ANAR, vptr->mac_regs); + break; + + case FLOW_CNTL_TX_RX: + MII_REG_BITS_ON(ANAR_PAUSE, MII_REG_ANAR, vptr->mac_regs); + MII_REG_BITS_ON(ANAR_ASMDIR, MII_REG_ANAR, vptr->mac_regs); + break; + + case FLOW_CNTL_DISABLE: + MII_REG_BITS_OFF(ANAR_PAUSE, MII_REG_ANAR, vptr->mac_regs); + MII_REG_BITS_OFF(ANAR_ASMDIR, MII_REG_ANAR, vptr->mac_regs); + break; + default: + break; + } +} + +/** + * velocity_set_media_mode - set media mode + * @mii_status: old MII link state + * + * Check the media link state and configure the flow control + * PHY and also velocity hardware setup accordingly. In particular + * we need to set up CD polling and frame bursting. + */ + +static int velocity_set_media_mode(struct velocity_info *vptr, u32 mii_status) +{ + u32 curr_status; + struct mac_regs __iomem * regs = vptr->mac_regs; + + vptr->mii_status = mii_check_media_mode(vptr->mac_regs); + curr_status = vptr->mii_status & (~VELOCITY_LINK_FAIL); + + /* Set mii link status */ + set_mii_flow_control(vptr); + + /* + Check if new status is consisent with current status + if (((mii_status & curr_status) & VELOCITY_AUTONEG_ENABLE) + || (mii_status==curr_status)) { + vptr->mii_status=mii_check_media_mode(vptr->mac_regs); + vptr->mii_status=check_connection_type(vptr->mac_regs); + VELOCITY_PRT(MSG_LEVEL_INFO, "Velocity link no change\n"); + return 0; + } + */ + + if (PHYID_GET_PHY_ID(vptr->phy_id) == PHYID_CICADA_CS8201) { + MII_REG_BITS_ON(AUXCR_MDPPS, MII_REG_AUXCR, vptr->mac_regs); + } + + /* + * If connection type is AUTO + */ + if (mii_status & VELOCITY_AUTONEG_ENABLE) { + VELOCITY_PRT(MSG_LEVEL_INFO, "Velocity is AUTO mode\n"); + /* clear force MAC mode bit */ + BYTE_REG_BITS_OFF(CHIPGCR_FCMODE, ®s->CHIPGCR); + /* set duplex mode of MAC according to duplex mode of MII */ + MII_REG_BITS_ON(ANAR_TXFD | ANAR_TX | ANAR_10FD | ANAR_10, MII_REG_ANAR, vptr->mac_regs); + MII_REG_BITS_ON(G1000CR_1000FD | G1000CR_1000, MII_REG_G1000CR, vptr->mac_regs); + MII_REG_BITS_ON(BMCR_SPEED1G, MII_REG_BMCR, vptr->mac_regs); + + /* enable AUTO-NEGO mode */ + mii_set_auto_on(vptr); + } else { + u16 ANAR; + u8 CHIPGCR; + + /* + * 1. if it's 3119, disable frame bursting in halfduplex mode + * and enable it in fullduplex mode + * 2. set correct MII/GMII and half/full duplex mode in CHIPGCR + * 3. only enable CD heart beat counter in 10HD mode + */ + + /* set force MAC mode bit */ + BYTE_REG_BITS_ON(CHIPGCR_FCMODE, ®s->CHIPGCR); + + CHIPGCR = readb(®s->CHIPGCR); + CHIPGCR &= ~CHIPGCR_FCGMII; + + if (mii_status & VELOCITY_DUPLEX_FULL) { + CHIPGCR |= CHIPGCR_FCFDX; + writeb(CHIPGCR, ®s->CHIPGCR); + VELOCITY_PRT(MSG_LEVEL_INFO, "set Velocity to forced full mode\n"); + if (vptr->rev_id < REV_ID_VT3216_A0) + BYTE_REG_BITS_OFF(TCR_TB2BDIS, ®s->TCR); + } else { + CHIPGCR &= ~CHIPGCR_FCFDX; + VELOCITY_PRT(MSG_LEVEL_INFO, "set Velocity to forced half mode\n"); + writeb(CHIPGCR, ®s->CHIPGCR); + if (vptr->rev_id < REV_ID_VT3216_A0) + BYTE_REG_BITS_ON(TCR_TB2BDIS, ®s->TCR); + } + + MII_REG_BITS_OFF(G1000CR_1000FD | G1000CR_1000, MII_REG_G1000CR, vptr->mac_regs); + + if (!(mii_status & VELOCITY_DUPLEX_FULL) && (mii_status & VELOCITY_SPEED_10)) { + BYTE_REG_BITS_OFF(TESTCFG_HBDIS, ®s->TESTCFG); + } else { + BYTE_REG_BITS_ON(TESTCFG_HBDIS, ®s->TESTCFG); + } + /* MII_REG_BITS_OFF(BMCR_SPEED1G, MII_REG_BMCR, vptr->mac_regs); */ + velocity_mii_read(vptr->mac_regs, MII_REG_ANAR, &ANAR); + ANAR &= (~(ANAR_TXFD | ANAR_TX | ANAR_10FD | ANAR_10)); + if (mii_status & VELOCITY_SPEED_100) { + if (mii_status & VELOCITY_DUPLEX_FULL) + ANAR |= ANAR_TXFD; + else + ANAR |= ANAR_TX; + } else { + if (mii_status & VELOCITY_DUPLEX_FULL) + ANAR |= ANAR_10FD; + else + ANAR |= ANAR_10; + } + velocity_mii_write(vptr->mac_regs, MII_REG_ANAR, ANAR); + /* enable AUTO-NEGO mode */ + mii_set_auto_on(vptr); + /* MII_REG_BITS_ON(BMCR_AUTO, MII_REG_BMCR, vptr->mac_regs); */ + } + /* vptr->mii_status=mii_check_media_mode(vptr->mac_regs); */ + /* vptr->mii_status=check_connection_type(vptr->mac_regs); */ + return VELOCITY_LINK_CHANGE; +} + +/** + * mii_check_media_mode - check media state + * @regs: velocity registers + * + * Check the current MII status and determine the link status + * accordingly + */ + +static u32 mii_check_media_mode(struct mac_regs __iomem * regs) +{ + u32 status = 0; + u16 ANAR; + + if (!MII_REG_BITS_IS_ON(BMSR_LNK, MII_REG_BMSR, regs)) + status |= VELOCITY_LINK_FAIL; + + if (MII_REG_BITS_IS_ON(G1000CR_1000FD, MII_REG_G1000CR, regs)) + status |= VELOCITY_SPEED_1000 | VELOCITY_DUPLEX_FULL; + else if (MII_REG_BITS_IS_ON(G1000CR_1000, MII_REG_G1000CR, regs)) + status |= (VELOCITY_SPEED_1000); + else { + velocity_mii_read(regs, MII_REG_ANAR, &ANAR); + if (ANAR & ANAR_TXFD) + status |= (VELOCITY_SPEED_100 | VELOCITY_DUPLEX_FULL); + else if (ANAR & ANAR_TX) + status |= VELOCITY_SPEED_100; + else if (ANAR & ANAR_10FD) + status |= (VELOCITY_SPEED_10 | VELOCITY_DUPLEX_FULL); + else + status |= (VELOCITY_SPEED_10); + } + + if (MII_REG_BITS_IS_ON(BMCR_AUTO, MII_REG_BMCR, regs)) { + velocity_mii_read(regs, MII_REG_ANAR, &ANAR); + if ((ANAR & (ANAR_TXFD | ANAR_TX | ANAR_10FD | ANAR_10)) + == (ANAR_TXFD | ANAR_TX | ANAR_10FD | ANAR_10)) { + if (MII_REG_BITS_IS_ON(G1000CR_1000 | G1000CR_1000FD, MII_REG_G1000CR, regs)) + status |= VELOCITY_AUTONEG_ENABLE; + } + } + + return status; +} + +static u32 check_connection_type(struct mac_regs __iomem * regs) +{ + u32 status = 0; + u8 PHYSR0; + u16 ANAR; + PHYSR0 = readb(®s->PHYSR0); + + /* + if (!(PHYSR0 & PHYSR0_LINKGD)) + status|=VELOCITY_LINK_FAIL; + */ + + if (PHYSR0 & PHYSR0_FDPX) + status |= VELOCITY_DUPLEX_FULL; + + if (PHYSR0 & PHYSR0_SPDG) + status |= VELOCITY_SPEED_1000; + if (PHYSR0 & PHYSR0_SPD10) + status |= VELOCITY_SPEED_10; + else + status |= VELOCITY_SPEED_100; + + if (MII_REG_BITS_IS_ON(BMCR_AUTO, MII_REG_BMCR, regs)) { + velocity_mii_read(regs, MII_REG_ANAR, &ANAR); + if ((ANAR & (ANAR_TXFD | ANAR_TX | ANAR_10FD | ANAR_10)) + == (ANAR_TXFD | ANAR_TX | ANAR_10FD | ANAR_10)) { + if (MII_REG_BITS_IS_ON(G1000CR_1000 | G1000CR_1000FD, MII_REG_G1000CR, regs)) + status |= VELOCITY_AUTONEG_ENABLE; + } + } + + return status; +} + +/** + * enable_flow_control_ability - flow control + * @vptr: veloity to configure + * + * Set up flow control according to the flow control options + * determined by the eeprom/configuration. + */ + +static void enable_flow_control_ability(struct velocity_info *vptr) +{ + + struct mac_regs __iomem * regs = vptr->mac_regs; + + switch (vptr->options.flow_cntl) { + + case FLOW_CNTL_DEFAULT: + if (BYTE_REG_BITS_IS_ON(PHYSR0_RXFLC, ®s->PHYSR0)) + writel(CR0_FDXRFCEN, ®s->CR0Set); + else + writel(CR0_FDXRFCEN, ®s->CR0Clr); + + if (BYTE_REG_BITS_IS_ON(PHYSR0_TXFLC, ®s->PHYSR0)) + writel(CR0_FDXTFCEN, ®s->CR0Set); + else + writel(CR0_FDXTFCEN, ®s->CR0Clr); + break; + + case FLOW_CNTL_TX: + writel(CR0_FDXTFCEN, ®s->CR0Set); + writel(CR0_FDXRFCEN, ®s->CR0Clr); + break; + + case FLOW_CNTL_RX: + writel(CR0_FDXRFCEN, ®s->CR0Set); + writel(CR0_FDXTFCEN, ®s->CR0Clr); + break; + + case FLOW_CNTL_TX_RX: + writel(CR0_FDXTFCEN, ®s->CR0Set); + writel(CR0_FDXRFCEN, ®s->CR0Set); + break; + + case FLOW_CNTL_DISABLE: + writel(CR0_FDXRFCEN, ®s->CR0Clr); + writel(CR0_FDXTFCEN, ®s->CR0Clr); + break; + + default: + break; + } + +} + + +/** + * velocity_ethtool_up - pre hook for ethtool + * @dev: network device + * + * Called before an ethtool operation. We need to make sure the + * chip is out of D3 state before we poke at it. + */ + +static int velocity_ethtool_up(struct net_device *dev) +{ + struct velocity_info *vptr = dev->priv; + if (!netif_running(dev)) + pci_set_power_state(vptr->pdev, PCI_D0); + return 0; +} + +/** + * velocity_ethtool_down - post hook for ethtool + * @dev: network device + * + * Called after an ethtool operation. Restore the chip back to D3 + * state if it isn't running. + */ + +static void velocity_ethtool_down(struct net_device *dev) +{ + struct velocity_info *vptr = dev->priv; + if (!netif_running(dev)) + pci_set_power_state(vptr->pdev, PCI_D3hot); +} + +static int velocity_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct velocity_info *vptr = dev->priv; + struct mac_regs __iomem * regs = vptr->mac_regs; + u32 status; + status = check_connection_type(vptr->mac_regs); + + cmd->supported = SUPPORTED_TP | SUPPORTED_Autoneg | SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | SUPPORTED_1000baseT_Half | SUPPORTED_1000baseT_Full; + if (status & VELOCITY_SPEED_100) + cmd->speed = SPEED_100; + else + cmd->speed = SPEED_10; + cmd->autoneg = (status & VELOCITY_AUTONEG_ENABLE) ? AUTONEG_ENABLE : AUTONEG_DISABLE; + cmd->port = PORT_TP; + cmd->transceiver = XCVR_INTERNAL; + cmd->phy_address = readb(®s->MIIADR) & 0x1F; + + if (status & VELOCITY_DUPLEX_FULL) + cmd->duplex = DUPLEX_FULL; + else + cmd->duplex = DUPLEX_HALF; + + return 0; +} + +static int velocity_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct velocity_info *vptr = dev->priv; + u32 curr_status; + u32 new_status = 0; + int ret = 0; + + curr_status = check_connection_type(vptr->mac_regs); + curr_status &= (~VELOCITY_LINK_FAIL); + + new_status |= ((cmd->autoneg) ? VELOCITY_AUTONEG_ENABLE : 0); + new_status |= ((cmd->speed == SPEED_100) ? VELOCITY_SPEED_100 : 0); + new_status |= ((cmd->speed == SPEED_10) ? VELOCITY_SPEED_10 : 0); + new_status |= ((cmd->duplex == DUPLEX_FULL) ? VELOCITY_DUPLEX_FULL : 0); + + if ((new_status & VELOCITY_AUTONEG_ENABLE) && (new_status != (curr_status | VELOCITY_AUTONEG_ENABLE))) + ret = -EINVAL; + else + velocity_set_media_mode(vptr, new_status); + + return ret; +} + +static u32 velocity_get_link(struct net_device *dev) +{ + struct velocity_info *vptr = dev->priv; + struct mac_regs __iomem * regs = vptr->mac_regs; + return BYTE_REG_BITS_IS_ON(PHYSR0_LINKGD, ®s->PHYSR0) ? 0 : 1; +} + +static void velocity_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) +{ + struct velocity_info *vptr = dev->priv; + strcpy(info->driver, VELOCITY_NAME); + strcpy(info->version, VELOCITY_VERSION); + strcpy(info->bus_info, pci_name(vptr->pdev)); +} + +static void velocity_ethtool_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) +{ + struct velocity_info *vptr = dev->priv; + wol->supported = WAKE_PHY | WAKE_MAGIC | WAKE_UCAST | WAKE_ARP; + wol->wolopts |= WAKE_MAGIC; + /* + if (vptr->wol_opts & VELOCITY_WOL_PHY) + wol.wolopts|=WAKE_PHY; + */ + if (vptr->wol_opts & VELOCITY_WOL_UCAST) + wol->wolopts |= WAKE_UCAST; + if (vptr->wol_opts & VELOCITY_WOL_ARP) + wol->wolopts |= WAKE_ARP; + memcpy(&wol->sopass, vptr->wol_passwd, 6); +} + +static int velocity_ethtool_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) +{ + struct velocity_info *vptr = dev->priv; + + if (!(wol->wolopts & (WAKE_PHY | WAKE_MAGIC | WAKE_UCAST | WAKE_ARP))) + return -EFAULT; + vptr->wol_opts = VELOCITY_WOL_MAGIC; + + /* + if (wol.wolopts & WAKE_PHY) { + vptr->wol_opts|=VELOCITY_WOL_PHY; + vptr->flags |=VELOCITY_FLAGS_WOL_ENABLED; + } + */ + + if (wol->wolopts & WAKE_MAGIC) { + vptr->wol_opts |= VELOCITY_WOL_MAGIC; + vptr->flags |= VELOCITY_FLAGS_WOL_ENABLED; + } + if (wol->wolopts & WAKE_UCAST) { + vptr->wol_opts |= VELOCITY_WOL_UCAST; + vptr->flags |= VELOCITY_FLAGS_WOL_ENABLED; + } + if (wol->wolopts & WAKE_ARP) { + vptr->wol_opts |= VELOCITY_WOL_ARP; + vptr->flags |= VELOCITY_FLAGS_WOL_ENABLED; + } + memcpy(vptr->wol_passwd, wol->sopass, 6); + return 0; +} + +static u32 velocity_get_msglevel(struct net_device *dev) +{ + return msglevel; +} + +static void velocity_set_msglevel(struct net_device *dev, u32 value) +{ + msglevel = value; +} + +static struct ethtool_ops velocity_ethtool_ops = { + .get_settings = velocity_get_settings, + .set_settings = velocity_set_settings, + .get_drvinfo = velocity_get_drvinfo, + .get_wol = velocity_ethtool_get_wol, + .set_wol = velocity_ethtool_set_wol, + .get_msglevel = velocity_get_msglevel, + .set_msglevel = velocity_set_msglevel, + .get_link = velocity_get_link, + .begin = velocity_ethtool_up, + .complete = velocity_ethtool_down +}; + +/** + * velocity_mii_ioctl - MII ioctl handler + * @dev: network device + * @ifr: the ifreq block for the ioctl + * @cmd: the command + * + * Process MII requests made via ioctl from the network layer. These + * are used by tools like kudzu to interrogate the link state of the + * hardware + */ + +static int velocity_mii_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) +{ + struct velocity_info *vptr = dev->priv; + struct mac_regs __iomem * regs = vptr->mac_regs; + unsigned long flags; + struct mii_ioctl_data *miidata = if_mii(ifr); + int err; + + switch (cmd) { + case SIOCGMIIPHY: + miidata->phy_id = readb(®s->MIIADR) & 0x1f; + break; + case SIOCGMIIREG: + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + if(velocity_mii_read(vptr->mac_regs, miidata->reg_num & 0x1f, &(miidata->val_out)) < 0) + return -ETIMEDOUT; + break; + case SIOCSMIIREG: + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + spin_lock_irqsave(&vptr->lock, flags); + err = velocity_mii_write(vptr->mac_regs, miidata->reg_num & 0x1f, miidata->val_in); + spin_unlock_irqrestore(&vptr->lock, flags); + check_connection_type(vptr->mac_regs); + if(err) + return err; + break; + default: + return -EOPNOTSUPP; + } + return 0; +} + +#ifdef CONFIG_PM + +/** + * velocity_save_context - save registers + * @vptr: velocity + * @context: buffer for stored context + * + * Retrieve the current configuration from the velocity hardware + * and stash it in the context structure, for use by the context + * restore functions. This allows us to save things we need across + * power down states + */ + +static void velocity_save_context(struct velocity_info *vptr, struct velocity_context * context) +{ + struct mac_regs __iomem * regs = vptr->mac_regs; + u16 i; + u8 __iomem *ptr = (u8 __iomem *)regs; + + for (i = MAC_REG_PAR; i < MAC_REG_CR0_CLR; i += 4) + *((u32 *) (context->mac_reg + i)) = readl(ptr + i); + + for (i = MAC_REG_MAR; i < MAC_REG_TDCSR_CLR; i += 4) + *((u32 *) (context->mac_reg + i)) = readl(ptr + i); + + for (i = MAC_REG_RDBASE_LO; i < MAC_REG_FIFO_TEST0; i += 4) + *((u32 *) (context->mac_reg + i)) = readl(ptr + i); + +} + +/** + * velocity_restore_context - restore registers + * @vptr: velocity + * @context: buffer for stored context + * + * Reload the register configuration from the velocity context + * created by velocity_save_context. + */ + +static void velocity_restore_context(struct velocity_info *vptr, struct velocity_context *context) +{ + struct mac_regs __iomem * regs = vptr->mac_regs; + int i; + u8 __iomem *ptr = (u8 __iomem *)regs; + + for (i = MAC_REG_PAR; i < MAC_REG_CR0_SET; i += 4) { + writel(*((u32 *) (context->mac_reg + i)), ptr + i); + } + + /* Just skip cr0 */ + for (i = MAC_REG_CR1_SET; i < MAC_REG_CR0_CLR; i++) { + /* Clear */ + writeb(~(*((u8 *) (context->mac_reg + i))), ptr + i + 4); + /* Set */ + writeb(*((u8 *) (context->mac_reg + i)), ptr + i); + } + + for (i = MAC_REG_MAR; i < MAC_REG_IMR; i += 4) { + writel(*((u32 *) (context->mac_reg + i)), ptr + i); + } + + for (i = MAC_REG_RDBASE_LO; i < MAC_REG_FIFO_TEST0; i += 4) { + writel(*((u32 *) (context->mac_reg + i)), ptr + i); + } + + for (i = MAC_REG_TDCSR_SET; i <= MAC_REG_RDCSR_SET; i++) { + writeb(*((u8 *) (context->mac_reg + i)), ptr + i); + } + +} + +/** + * wol_calc_crc - WOL CRC + * @pattern: data pattern + * @mask_pattern: mask + * + * Compute the wake on lan crc hashes for the packet header + * we are interested in. + */ + +static u16 wol_calc_crc(int size, u8 * pattern, u8 *mask_pattern) +{ + u16 crc = 0xFFFF; + u8 mask; + int i, j; + + for (i = 0; i < size; i++) { + mask = mask_pattern[i]; + + /* Skip this loop if the mask equals to zero */ + if (mask == 0x00) + continue; + + for (j = 0; j < 8; j++) { + if ((mask & 0x01) == 0) { + mask >>= 1; + continue; + } + mask >>= 1; + crc = crc_ccitt(crc, &(pattern[i * 8 + j]), 1); + } + } + /* Finally, invert the result once to get the correct data */ + crc = ~crc; + return bitreverse(crc) >> 16; +} + +/** + * velocity_set_wol - set up for wake on lan + * @vptr: velocity to set WOL status on + * + * Set a card up for wake on lan either by unicast or by + * ARP packet. + * + * FIXME: check static buffer is safe here + */ + +static int velocity_set_wol(struct velocity_info *vptr) +{ + struct mac_regs __iomem * regs = vptr->mac_regs; + static u8 buf[256]; + int i; + + static u32 mask_pattern[2][4] = { + {0x00203000, 0x000003C0, 0x00000000, 0x0000000}, /* ARP */ + {0xfffff000, 0xffffffff, 0xffffffff, 0x000ffff} /* Magic Packet */ + }; + + writew(0xFFFF, ®s->WOLCRClr); + writeb(WOLCFG_SAB | WOLCFG_SAM, ®s->WOLCFGSet); + writew(WOLCR_MAGIC_EN, ®s->WOLCRSet); + + /* + if (vptr->wol_opts & VELOCITY_WOL_PHY) + writew((WOLCR_LINKON_EN|WOLCR_LINKOFF_EN), ®s->WOLCRSet); + */ + + if (vptr->wol_opts & VELOCITY_WOL_UCAST) { + writew(WOLCR_UNICAST_EN, ®s->WOLCRSet); + } + + if (vptr->wol_opts & VELOCITY_WOL_ARP) { + struct arp_packet *arp = (struct arp_packet *) buf; + u16 crc; + memset(buf, 0, sizeof(struct arp_packet) + 7); + + for (i = 0; i < 4; i++) + writel(mask_pattern[0][i], ®s->ByteMask[0][i]); + + arp->type = htons(ETH_P_ARP); + arp->ar_op = htons(1); + + memcpy(arp->ar_tip, vptr->ip_addr, 4); + + crc = wol_calc_crc((sizeof(struct arp_packet) + 7) / 8, buf, + (u8 *) & mask_pattern[0][0]); + + writew(crc, ®s->PatternCRC[0]); + writew(WOLCR_ARP_EN, ®s->WOLCRSet); + } + + BYTE_REG_BITS_ON(PWCFG_WOLTYPE, ®s->PWCFGSet); + BYTE_REG_BITS_ON(PWCFG_LEGACY_WOLEN, ®s->PWCFGSet); + + writew(0x0FFF, ®s->WOLSRClr); + + if (vptr->mii_status & VELOCITY_AUTONEG_ENABLE) { + if (PHYID_GET_PHY_ID(vptr->phy_id) == PHYID_CICADA_CS8201) + MII_REG_BITS_ON(AUXCR_MDPPS, MII_REG_AUXCR, vptr->mac_regs); + + MII_REG_BITS_OFF(G1000CR_1000FD | G1000CR_1000, MII_REG_G1000CR, vptr->mac_regs); + } + + if (vptr->mii_status & VELOCITY_SPEED_1000) + MII_REG_BITS_ON(BMCR_REAUTO, MII_REG_BMCR, vptr->mac_regs); + + BYTE_REG_BITS_ON(CHIPGCR_FCMODE, ®s->CHIPGCR); + + { + u8 GCR; + GCR = readb(®s->CHIPGCR); + GCR = (GCR & ~CHIPGCR_FCGMII) | CHIPGCR_FCFDX; + writeb(GCR, ®s->CHIPGCR); + } + + BYTE_REG_BITS_OFF(ISR_PWEI, ®s->ISR); + /* Turn on SWPTAG just before entering power mode */ + BYTE_REG_BITS_ON(STICKHW_SWPTAG, ®s->STICKHW); + /* Go to bed ..... */ + BYTE_REG_BITS_ON((STICKHW_DS1 | STICKHW_DS0), ®s->STICKHW); + + return 0; +} + +static int velocity_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct velocity_info *vptr = netdev_priv(dev); + unsigned long flags; + + if(!netif_running(vptr->dev)) + return 0; + + netif_device_detach(vptr->dev); + + spin_lock_irqsave(&vptr->lock, flags); + pci_save_state(pdev); +#ifdef ETHTOOL_GWOL + if (vptr->flags & VELOCITY_FLAGS_WOL_ENABLED) { + velocity_get_ip(vptr); + velocity_save_context(vptr, &vptr->context); + velocity_shutdown(vptr); + velocity_set_wol(vptr); + pci_enable_wake(pdev, 3, 1); + pci_set_power_state(pdev, PCI_D3hot); + } else { + velocity_save_context(vptr, &vptr->context); + velocity_shutdown(vptr); + pci_disable_device(pdev); + pci_set_power_state(pdev, pci_choose_state(pdev, state)); + } +#else + pci_set_power_state(pdev, pci_choose_state(pdev, state)); +#endif + spin_unlock_irqrestore(&vptr->lock, flags); + return 0; +} + +static int velocity_resume(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct velocity_info *vptr = netdev_priv(dev); + unsigned long flags; + int i; + + if(!netif_running(vptr->dev)) + return 0; + + pci_set_power_state(pdev, PCI_D0); + pci_enable_wake(pdev, 0, 0); + pci_restore_state(pdev); + + mac_wol_reset(vptr->mac_regs); + + spin_lock_irqsave(&vptr->lock, flags); + velocity_restore_context(vptr, &vptr->context); + velocity_init_registers(vptr, VELOCITY_INIT_WOL); + mac_disable_int(vptr->mac_regs); + + velocity_tx_srv(vptr, 0); + + for (i = 0; i < vptr->num_txq; i++) { + if (vptr->td_used[i]) { + mac_tx_queue_wake(vptr->mac_regs, i); + } + } + + mac_enable_int(vptr->mac_regs); + spin_unlock_irqrestore(&vptr->lock, flags); + netif_device_attach(vptr->dev); + + return 0; +} + +static int velocity_netdev_event(struct notifier_block *nb, unsigned long notification, void *ptr) +{ + struct in_ifaddr *ifa = (struct in_ifaddr *) ptr; + + if (ifa) { + struct net_device *dev = ifa->ifa_dev->dev; + struct velocity_info *vptr; + unsigned long flags; + + spin_lock_irqsave(&velocity_dev_list_lock, flags); + list_for_each_entry(vptr, &velocity_dev_list, list) { + if (vptr->dev == dev) { + velocity_get_ip(vptr); + break; + } + } + spin_unlock_irqrestore(&velocity_dev_list_lock, flags); + } + return NOTIFY_DONE; +} +#endif |