1 files changed, 25 insertions, 9 deletions

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c
index a2354d951dd7..59c77aa3b959 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c
@@ -28,6 +28,7 @@
 #include "dhd.h"
 #include "dhd_proto.h"
 #include "dhd_bus.h"
+#include "fwsignal.h"
 #include "dhd_dbg.h"
 
 struct brcmf_proto_cdc_dcmd {
@@ -71,13 +72,26 @@ struct brcmf_proto_cdc_dcmd {
 	((hdr)->flags2 = (((hdr)->flags2 & ~BDC_FLAG2_IF_MASK) | \
 	((idx) << BDC_FLAG2_IF_SHIFT)))
 
+/**
+ * struct brcmf_proto_bdc_header - BDC header format
+ *
+ * @flags: flags contain protocol and checksum info.
+ * @priority: 802.1d priority and USB flow control info (bit 4:7).
+ * @flags2: additional flags containing dongle interface index.
+ * @data_offset: start of packet data. header is following by firmware signals.
+ */
 struct brcmf_proto_bdc_header {
 	u8 flags;
-	u8 priority;	/* 802.1d Priority, 4:7 flow control info for usb */
+	u8 priority;
 	u8 flags2;
 	u8 data_offset;
 };
 
+/*
+ * maximum length of firmware signal data between
+ * the BDC header and packet data in the tx path.
+ */
+#define BRCMF_PROT_FW_SIGNAL_MAX_TXBYTES	12
 
 #define RETRIES 2 /* # of retries to retrieve matching dcmd response */
 #define BUS_HEADER_LEN	(16+64)		/* Must be atleast SDPCM_RESERVE
@@ -258,7 +272,7 @@ static void pkt_set_sum_good(struct sk_buff *skb, bool x)
 	skb->ip_summed = (x ? CHECKSUM_UNNECESSARY : CHECKSUM_NONE);
 }
 
-void brcmf_proto_hdrpush(struct brcmf_pub *drvr, int ifidx,
+void brcmf_proto_hdrpush(struct brcmf_pub *drvr, int ifidx, u8 offset,
 			 struct sk_buff *pktbuf)
 {
 	struct brcmf_proto_bdc_header *h;
@@ -266,7 +280,6 @@ void brcmf_proto_hdrpush(struct brcmf_pub *drvr, int ifidx,
 	brcmf_dbg(CDC, "Enter\n");
 
 	/* Push BDC header used to convey priority for buses that don't */
-
 	skb_push(pktbuf, BDC_HEADER_LEN);
 
 	h = (struct brcmf_proto_bdc_header *)(pktbuf->data);
@@ -277,11 +290,11 @@ void brcmf_proto_hdrpush(struct brcmf_pub *drvr, int ifidx,
 
 	h->priority = (pktbuf->priority & BDC_PRIORITY_MASK);
 	h->flags2 = 0;
-	h->data_offset = 0;
+	h->data_offset = offset;
 	BDC_SET_IF_IDX(h, ifidx);
 }
 
-int brcmf_proto_hdrpull(struct brcmf_pub *drvr, u8 *ifidx,
+int brcmf_proto_hdrpull(struct brcmf_pub *drvr, bool do_fws, u8 *ifidx,
 			struct sk_buff *pktbuf)
 {
 	struct brcmf_proto_bdc_header *h;
@@ -290,8 +303,8 @@ int brcmf_proto_hdrpull(struct brcmf_pub *drvr, u8 *ifidx,
 
 	/* Pop BDC header used to convey priority for buses that don't */
 
-	if (pktbuf->len < BDC_HEADER_LEN) {
-		brcmf_err("rx data too short (%d < %d)\n",
+	if (pktbuf->len <= BDC_HEADER_LEN) {
+		brcmf_dbg(INFO, "rx data too short (%d <= %d)\n",
 			  pktbuf->len, BDC_HEADER_LEN);
 		return -EBADE;
 	}
@@ -328,7 +341,10 @@ int brcmf_proto_hdrpull(struct brcmf_pub *drvr, u8 *ifidx,
 	pktbuf->priority = h->priority & BDC_PRIORITY_MASK;
 
 	skb_pull(pktbuf, BDC_HEADER_LEN);
-	skb_pull(pktbuf, h->data_offset << 2);
+	if (do_fws)
+		brcmf_fws_hdrpull(drvr, *ifidx, h->data_offset << 2, pktbuf);
+	else
+		skb_pull(pktbuf, h->data_offset << 2);
 
 	if (pktbuf->len == 0)
 		return -ENODATA;
@@ -350,7 +366,7 @@ int brcmf_proto_attach(struct brcmf_pub *drvr)
 	}
 
 	drvr->prot = cdc;
-	drvr->hdrlen += BDC_HEADER_LEN;
+	drvr->hdrlen += BDC_HEADER_LEN + BRCMF_PROT_FW_SIGNAL_MAX_TXBYTES;
 	drvr->bus_if->maxctl = BRCMF_DCMD_MAXLEN +
 			sizeof(struct brcmf_proto_cdc_dcmd) + ROUND_UP_MARGIN;
 	return 0;