diff options
Diffstat (limited to 'drivers/net')
| -rw-r--r-- | drivers/net/ethernet/broadcom/bnx2.c | 37 | ||||
| -rw-r--r-- | drivers/net/ethernet/broadcom/bnx2.h | 5 |
2 files changed, 38 insertions, 4 deletions
diff --git a/drivers/net/ethernet/broadcom/bnx2.c b/drivers/net/ethernet/broadcom/bnx2.c index cda25ac45b47..6c9e1c9bdeb8 100644 --- a/drivers/net/ethernet/broadcom/bnx2.c +++ b/drivers/net/ethernet/broadcom/bnx2.c @@ -2507,6 +2507,7 @@ bnx2_fw_sync(struct bnx2 *bp, u32 msg_data, int ack, int silent) bp->fw_wr_seq++; msg_data |= bp->fw_wr_seq; + bp->fw_last_msg = msg_data; bnx2_shmem_wr(bp, BNX2_DRV_MB, msg_data); @@ -4000,8 +4001,23 @@ bnx2_setup_wol(struct bnx2 *bp) wol_msg = BNX2_DRV_MSG_CODE_SUSPEND_NO_WOL; } - if (!(bp->flags & BNX2_FLAG_NO_WOL)) - bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT3 | wol_msg, 1, 0); + if (!(bp->flags & BNX2_FLAG_NO_WOL)) { + u32 val; + + wol_msg |= BNX2_DRV_MSG_DATA_WAIT3; + if (bp->fw_last_msg || BNX2_CHIP(bp) != BNX2_CHIP_5709) { + bnx2_fw_sync(bp, wol_msg, 1, 0); + return; + } + /* Tell firmware not to power down the PHY yet, otherwise + * the chip will take a long time to respond to MMIO reads. + */ + val = bnx2_shmem_rd(bp, BNX2_PORT_FEATURE); + bnx2_shmem_wr(bp, BNX2_PORT_FEATURE, + val | BNX2_PORT_FEATURE_ASF_ENABLED); + bnx2_fw_sync(bp, wol_msg, 1, 0); + bnx2_shmem_wr(bp, BNX2_PORT_FEATURE, val); + } } @@ -4033,9 +4049,22 @@ bnx2_set_power_state(struct bnx2 *bp, pci_power_t state) if (bp->wol) pci_set_power_state(bp->pdev, PCI_D3hot); - } else { - pci_set_power_state(bp->pdev, PCI_D3hot); + break; + + } + if (!bp->fw_last_msg && BNX2_CHIP(bp) == BNX2_CHIP_5709) { + u32 val; + + /* Tell firmware not to power down the PHY yet, + * otherwise the other port may not respond to + * MMIO reads. + */ + val = bnx2_shmem_rd(bp, BNX2_BC_STATE_CONDITION); + val &= ~BNX2_CONDITION_PM_STATE_MASK; + val |= BNX2_CONDITION_PM_STATE_UNPREP; + bnx2_shmem_wr(bp, BNX2_BC_STATE_CONDITION, val); } + pci_set_power_state(bp->pdev, PCI_D3hot); /* No more memory access after this point until * device is brought back to D0. diff --git a/drivers/net/ethernet/broadcom/bnx2.h b/drivers/net/ethernet/broadcom/bnx2.h index f1cf2c44e7ed..e341bc366fa5 100644 --- a/drivers/net/ethernet/broadcom/bnx2.h +++ b/drivers/net/ethernet/broadcom/bnx2.h @@ -6900,6 +6900,7 @@ struct bnx2 { u16 fw_wr_seq; u16 fw_drv_pulse_wr_seq; + u32 fw_last_msg; int rx_max_ring; int rx_ring_size; @@ -7406,6 +7407,10 @@ struct bnx2_rv2p_fw_file { #define BNX2_CONDITION_MFW_RUN_NCSI 0x00006000 #define BNX2_CONDITION_MFW_RUN_NONE 0x0000e000 #define BNX2_CONDITION_MFW_RUN_MASK 0x0000e000 +#define BNX2_CONDITION_PM_STATE_MASK 0x00030000 +#define BNX2_CONDITION_PM_STATE_FULL 0x00030000 +#define BNX2_CONDITION_PM_STATE_PREP 0x00020000 +#define BNX2_CONDITION_PM_STATE_UNPREP 0x00010000 #define BNX2_BC_STATE_DEBUG_CMD 0x1dc #define BNX2_BC_STATE_BC_DBG_CMD_SIGNATURE 0x42440000 |