diff options
Diffstat (limited to 'drivers/net')
| -rw-r--r-- | drivers/net/jme.c | 51 | ||||
| -rw-r--r-- | drivers/net/jme.h | 30 |
2 files changed, 63 insertions, 18 deletions
diff --git a/drivers/net/jme.c b/drivers/net/jme.c index f292df557544..635f616fd974 100644 --- a/drivers/net/jme.c +++ b/drivers/net/jme.c @@ -190,7 +190,7 @@ jme_reset_mac_processor(struct jme_adapter *jme) else gpreg0 = GPREG0_DEFAULT; jwrite32(jme, JME_GPREG0, gpreg0); - jwrite32(jme, JME_GPREG1, 0); + jwrite32(jme, JME_GPREG1, GPREG1_DEFAULT); } static inline void @@ -365,7 +365,7 @@ static int jme_check_link(struct net_device *netdev, int testonly) { struct jme_adapter *jme = netdev_priv(netdev); - u32 phylink, ghc, cnt = JME_SPDRSV_TIMEOUT, bmcr; + u32 phylink, ghc, cnt = JME_SPDRSV_TIMEOUT, bmcr, gpreg1; char linkmsg[64]; int rc = 0; @@ -437,37 +437,22 @@ jme_check_link(struct net_device *netdev, int testonly) case PHY_LINK_SPEED_10M: ghc |= GHC_SPEED_10M; strcat(linkmsg, "10 Mbps, "); - if (is_buggy250(jme->pdev->device, jme->chiprev)) - jme_set_phyfifoa(jme); break; case PHY_LINK_SPEED_100M: ghc |= GHC_SPEED_100M; strcat(linkmsg, "100 Mbps, "); - if (is_buggy250(jme->pdev->device, jme->chiprev)) - jme_set_phyfifob(jme); break; case PHY_LINK_SPEED_1000M: ghc |= GHC_SPEED_1000M; strcat(linkmsg, "1000 Mbps, "); - if (is_buggy250(jme->pdev->device, jme->chiprev)) - jme_set_phyfifoa(jme); break; default: break; } - ghc |= (phylink & PHY_LINK_DUPLEX) ? GHC_DPX : 0; - - strcat(linkmsg, (phylink & PHY_LINK_DUPLEX) ? - "Full-Duplex, " : - "Half-Duplex, "); - - if (phylink & PHY_LINK_MDI_STAT) - strcat(linkmsg, "MDI-X"); - else - strcat(linkmsg, "MDI"); if (phylink & PHY_LINK_DUPLEX) { jwrite32(jme, JME_TXMCS, TXMCS_DEFAULT); + ghc |= GHC_DPX; } else { jwrite32(jme, JME_TXMCS, TXMCS_DEFAULT | TXMCS_BACKOFF | @@ -478,6 +463,36 @@ jme_check_link(struct net_device *netdev, int testonly) TXTRHD_TXREN | ((8 << TXTRHD_TXRL_SHIFT) & TXTRHD_TXRL)); } + strcat(linkmsg, (phylink & PHY_LINK_DUPLEX) ? + "Full-Duplex, " : + "Half-Duplex, "); + + if (phylink & PHY_LINK_MDI_STAT) + strcat(linkmsg, "MDI-X"); + else + strcat(linkmsg, "MDI"); + + gpreg1 = GPREG1_DEFAULT; + if (is_buggy250(jme->pdev->device, jme->chiprev)) { + if (!(phylink & PHY_LINK_DUPLEX)) + gpreg1 |= GPREG1_HALFMODEPATCH; + switch (phylink & PHY_LINK_SPEED_MASK) { + case PHY_LINK_SPEED_10M: + jme_set_phyfifoa(jme); + gpreg1 |= GPREG1_RSSPATCH; + break; + case PHY_LINK_SPEED_100M: + jme_set_phyfifob(jme); + gpreg1 |= GPREG1_RSSPATCH; + break; + case PHY_LINK_SPEED_1000M: + jme_set_phyfifoa(jme); + break; + default: + break; + } + } + jwrite32(jme, JME_GPREG1, gpreg1); jme->reg_ghc = ghc; jwrite32(jme, JME_GHC, ghc); diff --git a/drivers/net/jme.h b/drivers/net/jme.h index b29688431a6d..9fdf20a9a820 100644 --- a/drivers/net/jme.h +++ b/drivers/net/jme.h @@ -964,6 +964,36 @@ enum jme_gpreg0_vals { }; /* + * General Purpose REG-1 + * Note: All theses bits defined here are for + * Chip mode revision 0x11 only + */ +enum jme_gpreg1_masks { + GPREG1_INTRDELAYUNIT = 0x00000018, + GPREG1_INTRDELAYENABLE = 0x00000007, +}; + +enum jme_gpreg1_vals { + GPREG1_RSSPATCH = 0x00000040, + GPREG1_HALFMODEPATCH = 0x00000020, + + GPREG1_INTDLYUNIT_16NS = 0x00000000, + GPREG1_INTDLYUNIT_256NS = 0x00000008, + GPREG1_INTDLYUNIT_1US = 0x00000010, + GPREG1_INTDLYUNIT_16US = 0x00000018, + + GPREG1_INTDLYEN_1U = 0x00000001, + GPREG1_INTDLYEN_2U = 0x00000002, + GPREG1_INTDLYEN_3U = 0x00000003, + GPREG1_INTDLYEN_4U = 0x00000004, + GPREG1_INTDLYEN_5U = 0x00000005, + GPREG1_INTDLYEN_6U = 0x00000006, + GPREG1_INTDLYEN_7U = 0x00000007, + + GPREG1_DEFAULT = 0x00000000, +}; + +/* * Interrupt Status Bits */ enum jme_interrupt_bits { |