diff options
Diffstat (limited to 'drivers/net')
167 files changed, 19720 insertions, 11512 deletions
diff --git a/drivers/net/3c59x.c b/drivers/net/3c59x.c index b9eeadf01b74..975e25b19ebe 100644 --- a/drivers/net/3c59x.c +++ b/drivers/net/3c59x.c @@ -805,52 +805,54 @@ static void poll_vortex(struct net_device *dev) #ifdef CONFIG_PM -static int vortex_suspend(struct pci_dev *pdev, pm_message_t state) +static int vortex_suspend(struct device *dev) { - struct net_device *dev = pci_get_drvdata(pdev); + struct pci_dev *pdev = to_pci_dev(dev); + struct net_device *ndev = pci_get_drvdata(pdev); + + if (!ndev || !netif_running(ndev)) + return 0; + + netif_device_detach(ndev); + vortex_down(ndev, 1); - if (dev && netdev_priv(dev)) { - if (netif_running(dev)) { - netif_device_detach(dev); - vortex_down(dev, 1); - disable_irq(dev->irq); - } - pci_save_state(pdev); - pci_enable_wake(pdev, pci_choose_state(pdev, state), 0); - pci_disable_device(pdev); - pci_set_power_state(pdev, pci_choose_state(pdev, state)); - } return 0; } -static int vortex_resume(struct pci_dev *pdev) +static int vortex_resume(struct device *dev) { - struct net_device *dev = pci_get_drvdata(pdev); - struct vortex_private *vp = netdev_priv(dev); + struct pci_dev *pdev = to_pci_dev(dev); + struct net_device *ndev = pci_get_drvdata(pdev); int err; - if (dev && vp) { - pci_set_power_state(pdev, PCI_D0); - pci_restore_state(pdev); - err = pci_enable_device(pdev); - if (err) { - pr_warning("%s: Could not enable device\n", - dev->name); - return err; - } - pci_set_master(pdev); - if (netif_running(dev)) { - err = vortex_up(dev); - if (err) - return err; - enable_irq(dev->irq); - netif_device_attach(dev); - } - } + if (!ndev || !netif_running(ndev)) + return 0; + + err = vortex_up(ndev); + if (err) + return err; + + netif_device_attach(ndev); + return 0; } -#endif /* CONFIG_PM */ +static struct dev_pm_ops vortex_pm_ops = { + .suspend = vortex_suspend, + .resume = vortex_resume, + .freeze = vortex_suspend, + .thaw = vortex_resume, + .poweroff = vortex_suspend, + .restore = vortex_resume, +}; + +#define VORTEX_PM_OPS (&vortex_pm_ops) + +#else /* !CONFIG_PM */ + +#define VORTEX_PM_OPS NULL + +#endif /* !CONFIG_PM */ #ifdef CONFIG_EISA static struct eisa_device_id vortex_eisa_ids[] = { @@ -3199,10 +3201,7 @@ static struct pci_driver vortex_driver = { .probe = vortex_init_one, .remove = __devexit_p(vortex_remove_one), .id_table = vortex_pci_tbl, -#ifdef CONFIG_PM - .suspend = vortex_suspend, - .resume = vortex_resume, -#endif + .driver.pm = VORTEX_PM_OPS, }; diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 2bea67c134f0..e19ca4bb7510 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1738,6 +1738,14 @@ config KS8851 help SPI driver for Micrel KS8851 SPI attached network chip. +config KS8851_MLL + tristate "Micrel KS8851 MLL" + depends on HAS_IOMEM + select MII + help + This platform driver is for Micrel KS8851 Address/data bus + multiplexed network chip. + config VIA_RHINE tristate "VIA Rhine support" depends on NET_PCI && PCI @@ -2475,6 +2483,8 @@ config S6GMAC To compile this driver as a module, choose M here. The module will be called s6gmac. +source "drivers/net/stmmac/Kconfig" + endif # NETDEV_1000 # @@ -3223,4 +3233,12 @@ config VIRTIO_NET This is the virtual network driver for virtio. It can be used with lguest or QEMU based VMMs (like KVM or Xen). Say Y or M. +config VMXNET3 + tristate "VMware VMXNET3 ethernet driver" + depends on PCI && X86 && INET + help + This driver supports VMware's vmxnet3 virtual ethernet NIC. + To compile this driver as a module, choose M here: the + module will be called vmxnet3. + endif # NETDEVICES diff --git a/drivers/net/Makefile b/drivers/net/Makefile index ae8cd30f13d6..246323d7f161 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -2,6 +2,10 @@ # Makefile for the Linux network (ethercard) device drivers. # +obj-$(CONFIG_MII) += mii.o +obj-$(CONFIG_MDIO) += mdio.o +obj-$(CONFIG_PHYLIB) += phy/ + obj-$(CONFIG_TI_DAVINCI_EMAC) += davinci_emac.o obj-$(CONFIG_E1000) += e1000/ @@ -26,6 +30,7 @@ obj-$(CONFIG_TEHUTI) += tehuti.o obj-$(CONFIG_ENIC) += enic/ obj-$(CONFIG_JME) += jme.o obj-$(CONFIG_BE2NET) += benet/ +obj-$(CONFIG_VMXNET3) += vmxnet3/ gianfar_driver-objs := gianfar.o \ gianfar_ethtool.o \ @@ -89,20 +94,18 @@ obj-$(CONFIG_SKY2) += sky2.o obj-$(CONFIG_SKFP) += skfp/ obj-$(CONFIG_KS8842) += ks8842.o obj-$(CONFIG_KS8851) += ks8851.o +obj-$(CONFIG_KS8851_MLL) += ks8851_mll.o obj-$(CONFIG_VIA_RHINE) += via-rhine.o obj-$(CONFIG_VIA_VELOCITY) += via-velocity.o obj-$(CONFIG_ADAPTEC_STARFIRE) += starfire.o obj-$(CONFIG_RIONET) += rionet.o obj-$(CONFIG_SH_ETH) += sh_eth.o +obj-$(CONFIG_STMMAC_ETH) += stmmac/ # # end link order section # -obj-$(CONFIG_MII) += mii.o -obj-$(CONFIG_MDIO) += mdio.o -obj-$(CONFIG_PHYLIB) += phy/ - obj-$(CONFIG_SUNDANCE) += sundance.o obj-$(CONFIG_HAMACHI) += hamachi.o obj-$(CONFIG_NET) += Space.o loopback.o diff --git a/drivers/net/acenic.c b/drivers/net/acenic.c index 5f0b05c2d71f..d82a9a994753 100644 --- a/drivers/net/acenic.c +++ b/drivers/net/acenic.c @@ -1209,7 +1209,8 @@ static int __devinit ace_init(struct net_device *dev) memset(ap->info, 0, sizeof(struct ace_info)); memset(ap->skb, 0, sizeof(struct ace_skb)); - if (ace_load_firmware(dev)) + ecode = ace_load_firmware(dev); + if (ecode) goto init_error; ap->fw_running = 0; diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c index fdf5937233fc..04f63c77071d 100644 --- a/drivers/net/au1000_eth.c +++ b/drivers/net/au1000_eth.c @@ -721,7 +721,7 @@ static inline void update_rx_stats(struct net_device *dev, u32 status) ps->rx_errors++; if (status & RX_MISSED_FRAME) ps->rx_missed_errors++; - if (status & (RX_OVERLEN | RX_OVERLEN | RX_LEN_ERROR)) + if (status & (RX_OVERLEN | RX_RUNT | RX_LEN_ERROR)) ps->rx_length_errors++; if (status & RX_CRC_ERROR) ps->rx_crc_errors++; @@ -794,8 +794,6 @@ static int au1000_rx(struct net_device *dev) printk("rx len error\n"); if (status & RX_U_CNTRL_FRAME) printk("rx u control frame\n"); - if (status & RX_MISSED_FRAME) - printk("rx miss\n"); } } prxd->buff_stat = (u32)(pDB->dma_addr | RX_DMA_ENABLE); diff --git a/drivers/net/bcm63xx_enet.c b/drivers/net/bcm63xx_enet.c index 09d270913c50..ba29dc319b34 100644 --- a/drivers/net/bcm63xx_enet.c +++ b/drivers/net/bcm63xx_enet.c @@ -90,7 +90,7 @@ static int do_mdio_op(struct bcm_enet_priv *priv, unsigned int data) if (enet_readl(priv, ENET_IR_REG) & ENET_IR_MII) break; udelay(1); - } while (limit-- >= 0); + } while (limit-- > 0); return (limit < 0) ? 1 : 0; } diff --git a/drivers/net/benet/be.h b/drivers/net/benet/be.h index 684c6fe24c8d..a80da0e14a52 100644 --- a/drivers/net/benet/be.h +++ b/drivers/net/benet/be.h @@ -258,6 +258,7 @@ struct be_adapter { bool link_up; u32 port_num; bool promiscuous; + u32 cap; }; extern const struct ethtool_ops be_ethtool_ops; diff --git a/drivers/net/benet/be_cmds.c b/drivers/net/benet/be_cmds.c index 3dd76c4170bf..89876ade5e33 100644 --- a/drivers/net/benet/be_cmds.c +++ b/drivers/net/benet/be_cmds.c @@ -1068,7 +1068,7 @@ int be_cmd_get_flow_control(struct be_adapter *adapter, u32 *tx_fc, u32 *rx_fc) } /* Uses mbox */ -int be_cmd_query_fw_cfg(struct be_adapter *adapter, u32 *port_num) +int be_cmd_query_fw_cfg(struct be_adapter *adapter, u32 *port_num, u32 *cap) { struct be_mcc_wrb *wrb; struct be_cmd_req_query_fw_cfg *req; @@ -1088,6 +1088,7 @@ int be_cmd_query_fw_cfg(struct be_adapter *adapter, u32 *port_num) if (!status) { struct be_cmd_resp_query_fw_cfg *resp = embedded_payload(wrb); *port_num = le32_to_cpu(resp->phys_port); + *cap = le32_to_cpu(resp->function_cap); } spin_unlock(&adapter->mbox_lock); @@ -1128,7 +1129,6 @@ int be_cmd_write_flashrom(struct be_adapter *adapter, struct be_dma_mem *cmd, spin_lock_bh(&adapter->mcc_lock); wrb = wrb_from_mccq(adapter); - req = embedded_payload(wrb); sge = nonembedded_sgl(wrb); be_wrb_hdr_prepare(wrb, cmd->size, false, 1); diff --git a/drivers/net/benet/be_cmds.h b/drivers/net/benet/be_cmds.h index 93e432f3d926..a86f917f85f4 100644 --- a/drivers/net/benet/be_cmds.h +++ b/drivers/net/benet/be_cmds.h @@ -62,7 +62,7 @@ enum { MCC_STATUS_QUEUE_FLUSHING = 0x4, /* The command is completing with a DMA error */ MCC_STATUS_DMA_FAILED = 0x5, - MCC_STATUS_NOT_SUPPORTED = 0x66 + MCC_STATUS_NOT_SUPPORTED = 66 }; #define CQE_STATUS_COMPL_MASK 0xFFFF @@ -760,7 +760,8 @@ extern int be_cmd_set_flow_control(struct be_adapter *adapter, u32 tx_fc, u32 rx_fc); extern int be_cmd_get_flow_control(struct be_adapter *adapter, u32 *tx_fc, u32 *rx_fc); -extern int be_cmd_query_fw_cfg(struct be_adapter *adapter, u32 *port_num); +extern int be_cmd_query_fw_cfg(struct be_adapter *adapter, + u32 *port_num, u32 *cap); extern int be_cmd_reset_function(struct be_adapter *adapter); extern int be_process_mcc(struct be_adapter *adapter); extern int be_cmd_write_flashrom(struct be_adapter *adapter, diff --git a/drivers/net/benet/be_ethtool.c b/drivers/net/benet/be_ethtool.c index 11445df3dbc0..cda5bf2fc50a 100644 --- a/drivers/net/benet/be_ethtool.c +++ b/drivers/net/benet/be_ethtool.c @@ -358,7 +358,7 @@ const struct ethtool_ops be_ethtool_ops = { .get_rx_csum = be_get_rx_csum, .set_rx_csum = be_set_rx_csum, .get_tx_csum = ethtool_op_get_tx_csum, - .set_tx_csum = ethtool_op_set_tx_csum, + .set_tx_csum = ethtool_op_set_tx_hw_csum, .get_sg = ethtool_op_get_sg, .set_sg = ethtool_op_set_sg, .get_tso = ethtool_op_get_tso, diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c index 409cf0595903..6d5e81f7046f 100644 --- a/drivers/net/benet/be_main.c +++ b/drivers/net/benet/be_main.c @@ -197,7 +197,7 @@ void netdev_stats_update(struct be_adapter *adapter) /* no space available in linux */ dev_stats->tx_dropped = 0; - dev_stats->multicast = port_stats->tx_multicastframes; + dev_stats->multicast = port_stats->rx_multicast_frames; dev_stats->collisions = 0; /* detailed tx_errors */ @@ -747,9 +747,16 @@ static void be_rx_compl_process(struct be_adapter *adapter, struct be_eth_rx_compl *rxcp) { struct sk_buff *skb; - u32 vtp, vid; + u32 vlanf, vid; + u8 vtm; - vtp = AMAP_GET_BITS(struct amap_eth_rx_compl, vtp, rxcp); + vlanf = AMAP_GET_BITS(struct amap_eth_rx_compl, vtp, rxcp); + vtm = AMAP_GET_BITS(struct amap_eth_rx_compl, vtm, rxcp); + + /* vlanf could be wrongly set in some cards. + * ignore if vtm is not set */ + if ((adapter->cap == 0x400) && !vtm) + vlanf = 0; skb = netdev_alloc_skb(adapter->netdev, BE_HDR_LEN + NET_IP_ALIGN); if (!skb) { @@ -772,7 +779,7 @@ static void be_rx_compl_process(struct be_adapter *adapter, skb->protocol = eth_type_trans(skb, adapter->netdev); skb->dev = adapter->netdev; - if (vtp) { + if (vlanf) { if (!adapter->vlan_grp || adapter->num_vlans == 0) { kfree_skb(skb); return; @@ -797,11 +804,18 @@ static void be_rx_compl_process_gro(struct be_adapter *adapter, struct be_eq_obj *eq_obj = &adapter->rx_eq; u32 num_rcvd, pkt_size, remaining, vlanf, curr_frag_len; u16 i, rxq_idx = 0, vid, j; + u8 vtm; num_rcvd = AMAP_GET_BITS(struct amap_eth_rx_compl, numfrags, rxcp); pkt_size = AMAP_GET_BITS(struct amap_eth_rx_compl, pktsize, rxcp); vlanf = AMAP_GET_BITS(struct amap_eth_rx_compl, vtp, rxcp); rxq_idx = AMAP_GET_BITS(struct amap_eth_rx_compl, fragndx, rxcp); + vtm = AMAP_GET_BITS(struct amap_eth_rx_compl, vtm, rxcp); + + /* vlanf could be wrongly set in some cards. + * ignore if vtm is not set */ + if ((adapter->cap == 0x400) && !vtm) + vlanf = 0; skb = napi_get_frags(&eq_obj->napi); if (!skb) { @@ -1885,8 +1899,8 @@ static void be_netdev_init(struct net_device *netdev) struct be_adapter *adapter = netdev_priv(netdev); netdev->features |= NETIF_F_SG | NETIF_F_HW_VLAN_RX | NETIF_F_TSO | - NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_FILTER | NETIF_F_IP_CSUM | - NETIF_F_IPV6_CSUM | NETIF_F_GRO; + NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_FILTER | NETIF_F_HW_CSUM | + NETIF_F_GRO; netdev->flags |= IFF_MULTICAST; @@ -2045,7 +2059,8 @@ static int be_hw_up(struct be_adapter *adapter) if (status) return status; - status = be_cmd_query_fw_cfg(adapter, &adapter->port_num); + status = be_cmd_query_fw_cfg(adapter, + &adapter->port_num, &adapter->cap); return status; } diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c index 6044e12ff9fc..8762a27a2a18 100644 --- a/drivers/net/bonding/bond_sysfs.c +++ b/drivers/net/bonding/bond_sysfs.c @@ -22,6 +22,7 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/device.h> +#include <linux/sched.h> #include <linux/sysdev.h> #include <linux/fs.h> #include <linux/types.h> @@ -1182,6 +1183,7 @@ static ssize_t bonding_store_primary(struct device *d, ": %s: Setting %s as primary slave.\n", bond->dev->name, slave->dev->name); bond->primary_slave = slave; + strcpy(bond->params.primary, slave->dev->name); bond_select_active_slave(bond); goto out; } diff --git a/drivers/net/can/sja1000/sja1000_of_platform.c b/drivers/net/can/sja1000/sja1000_of_platform.c index 3373560405ba..9dd076a626a5 100644 --- a/drivers/net/can/sja1000/sja1000_of_platform.c +++ b/drivers/net/can/sja1000/sja1000_of_platform.c @@ -213,6 +213,7 @@ static struct of_device_id __devinitdata sja1000_ofp_table[] = { {.compatible = "nxp,sja1000"}, {}, }; +MODULE_DEVICE_TABLE(of, sja1000_ofp_table); static struct of_platform_driver sja1000_ofp_driver = { .owner = THIS_MODULE, diff --git a/drivers/net/cnic.c b/drivers/net/cnic.c index 211c8e9182fc..46c87ec7960c 100644 --- a/drivers/net/cnic.c +++ b/drivers/net/cnic.c @@ -2733,7 +2733,8 @@ static int cnic_netdev_event(struct notifier_block *this, unsigned long event, cnic_ulp_init(dev); else if (event == NETDEV_UNREGISTER) cnic_ulp_exit(dev); - else if (event == NETDEV_UP) { + + if (event == NETDEV_UP) { if (cnic_register_netdev(dev) != 0) { cnic_put(dev); goto done; diff --git a/drivers/net/cnic_if.h b/drivers/net/cnic_if.h index a49235739eef..d8b09efdcb52 100644 --- a/drivers/net/cnic_if.h +++ b/drivers/net/cnic_if.h @@ -12,8 +12,8 @@ #ifndef CNIC_IF_H #define CNIC_IF_H -#define CNIC_MODULE_VERSION "2.0.0" -#define CNIC_MODULE_RELDATE "May 21, 2009" +#define CNIC_MODULE_VERSION "2.0.1" +#define CNIC_MODULE_RELDATE "Oct 01, 2009" #define CNIC_ULP_RDMA 0 #define CNIC_ULP_ISCSI 1 diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c index 65a2d0ba64e2..f72c56dec33c 100644 --- a/drivers/net/davinci_emac.c +++ b/drivers/net/davinci_emac.c @@ -333,6 +333,9 @@ static const char emac_version_string[] = "TI DaVinci EMAC Linux v6.1"; #define EMAC_DM646X_MAC_EOI_C0_RXEN (0x01) #define EMAC_DM646X_MAC_EOI_C0_TXEN (0x02) +/* EMAC Stats Clear Mask */ +#define EMAC_STATS_CLR_MASK (0xFFFFFFFF) + /** net_buf_obj: EMAC network bufferdata structure * * EMAC network buffer data structure @@ -2548,40 +2551,49 @@ static int emac_dev_stop(struct net_device *ndev) static struct net_device_stats *emac_dev_getnetstats(struct net_device *ndev) { struct emac_priv *priv = netdev_priv(ndev); + u32 mac_control; + u32 stats_clear_mask; /* update emac hardware stats and reset the registers*/ + mac_control = emac_read(EMAC_MACCONTROL); + + if (mac_control & EMAC_MACCONTROL_GMIIEN) + stats_clear_mask = EMAC_STATS_CLR_MASK; + else + stats_clear_mask = 0; + priv->net_dev_stats.multicast += emac_read(EMAC_RXMCASTFRAMES); - emac_write(EMAC_RXMCASTFRAMES, EMAC_ALL_MULTI_REG_VALUE); + emac_write(EMAC_RXMCASTFRAMES, stats_clear_mask); priv->net_dev_stats.collisions += (emac_read(EMAC_TXCOLLISION) + emac_read(EMAC_TXSINGLECOLL) + emac_read(EMAC_TXMULTICOLL)); - emac_write(EMAC_TXCOLLISION, EMAC_ALL_MULTI_REG_VALUE); - emac_write(EMAC_TXSINGLECOLL, EMAC_ALL_MULTI_REG_VALUE); - emac_write(EMAC_TXMULTICOLL, EMAC_ALL_MULTI_REG_VALUE); + emac_write(EMAC_TXCOLLISION, stats_clear_mask); + emac_write(EMAC_TXSINGLECOLL, stats_clear_mask); + emac_write(EMAC_TXMULTICOLL, stats_clear_mask); priv->net_dev_stats.rx_length_errors += (emac_read(EMAC_RXOVERSIZED) + emac_read(EMAC_RXJABBER) + emac_read(EMAC_RXUNDERSIZED)); - emac_write(EMAC_RXOVERSIZED, EMAC_ALL_MULTI_REG_VALUE); - emac_write(EMAC_RXJABBER, EMAC_ALL_MULTI_REG_VALUE); - emac_write(EMAC_RXUNDERSIZED, EMAC_ALL_MULTI_REG_VALUE); + emac_write(EMAC_RXOVERSIZED, stats_clear_mask); + emac_write(EMAC_RXJABBER, stats_clear_mask); + emac_write(EMAC_RXUNDERSIZED, stats_clear_mask); priv->net_dev_stats.rx_over_errors += (emac_read(EMAC_RXSOFOVERRUNS) + emac_read(EMAC_RXMOFOVERRUNS)); - emac_write(EMAC_RXSOFOVERRUNS, EMAC_ALL_MULTI_REG_VALUE); - emac_write(EMAC_RXMOFOVERRUNS, EMAC_ALL_MULTI_REG_VALUE); + emac_write(EMAC_RXSOFOVERRUNS, stats_clear_mask); + emac_write(EMAC_RXMOFOVERRUNS, stats_clear_mask); priv->net_dev_stats.rx_fifo_errors += emac_read(EMAC_RXDMAOVERRUNS); - emac_write(EMAC_RXDMAOVERRUNS, EMAC_ALL_MULTI_REG_VALUE); + emac_write(EMAC_RXDMAOVERRUNS, stats_clear_mask); priv->net_dev_stats.tx_carrier_errors += emac_read(EMAC_TXCARRIERSENSE); - emac_write(EMAC_TXCARRIERSENSE, EMAC_ALL_MULTI_REG_VALUE); + emac_write(EMAC_TXCARRIERSENSE, stats_clear_mask); priv->net_dev_stats.tx_fifo_errors = emac_read(EMAC_TXUNDERRUN); - emac_write(EMAC_TXUNDERRUN, EMAC_ALL_MULTI_REG_VALUE); + emac_write(EMAC_TXUNDERRUN, stats_clear_mask); return &priv->net_dev_stats; } diff --git a/drivers/net/depca.c b/drivers/net/depca.c index 9686c1fa28f1..7a3bdac84abe 100644 --- a/drivers/net/depca.c +++ b/drivers/net/depca.c @@ -237,6 +237,7 @@ #include <linux/module.h> #include <linux/kernel.h> +#include <linux/sched.h> #include <linux/string.h> #include <linux/errno.h> #include <linux/ioport.h> diff --git a/drivers/net/e100.c b/drivers/net/e100.c index 679965c2bb86..5d2f48f02251 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -151,6 +151,7 @@ #include <linux/moduleparam.h> #include <linux/kernel.h> #include <linux/types.h> +#include <linux/sched.h> #include <linux/slab.h> #include <linux/delay.h> #include <linux/init.h> diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h index 1a4f89c66a26..42e2b7e21c29 100644 --- a/drivers/net/e1000/e1000.h +++ b/drivers/net/e1000/e1000.h @@ -149,7 +149,6 @@ do { \ #define AUTO_ALL_MODES 0 #define E1000_EEPROM_82544_APM 0x0004 -#define E1000_EEPROM_ICH8_APME 0x0004 #define E1000_EEPROM_APME 0x0400 #ifndef E1000_MASTER_SLAVE @@ -293,7 +292,6 @@ struct e1000_adapter { u64 hw_csum_err; u64 hw_csum_good; - u64 rx_hdr_split; u32 alloc_rx_buff_failed; u32 rx_int_delay; u32 rx_abs_int_delay; @@ -317,7 +315,6 @@ struct e1000_adapter { struct e1000_rx_ring test_rx_ring; int msg_enable; - bool have_msi; /* to not mess up cache alignment, always add to the bottom */ bool tso_force; diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c index 27f996a2010f..490b2b7cd3ab 100644 --- a/drivers/net/e1000/e1000_ethtool.c +++ b/drivers/net/e1000/e1000_ethtool.c @@ -82,7 +82,6 @@ static const struct e1000_stats e1000_gstrings_stats[] = { { "rx_long_byte_count", E1000_STAT(stats.gorcl) }, { "rx_csum_offload_good", E1000_STAT(hw_csum_good) }, { "rx_csum_offload_errors", E1000_STAT(hw_csum_err) }, - { "rx_header_split", E1000_STAT(rx_hdr_split) }, { "alloc_rx_buff_failed", E1000_STAT(alloc_rx_buff_failed) }, { "tx_smbus", E1000_STAT(stats.mgptc) }, { "rx_smbus", E1000_STAT(stats.mgprc) }, @@ -114,8 +113,6 @@ static int e1000_get_settings(struct net_device *netdev, SUPPORTED_1000baseT_Full| SUPPORTED_Autoneg | SUPPORTED_TP); - if (hw->phy_type == e1000_phy_ife) - ecmd->supported &= ~SUPPORTED_1000baseT_Full; ecmd->advertising = ADVERTISED_TP; if (hw->autoneg == 1) { @@ -178,14 +175,6 @@ static int e1000_set_settings(struct net_device *netdev, struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; - /* When SoL/IDER sessions are active, autoneg/speed/duplex - * cannot be changed */ - if (e1000_check_phy_reset_block(hw)) { - DPRINTK(DRV, ERR, "Cannot change link characteristics " - "when SoL/IDER is active.\n"); - return -EINVAL; - } - while (test_and_set_bit(__E1000_RESETTING, &adapter->flags)) msleep(1); @@ -330,10 +319,7 @@ static int e1000_set_tso(struct net_device *netdev, u32 data) else netdev->features &= ~NETIF_F_TSO; - if (data && (adapter->hw.mac_type > e1000_82547_rev_2)) - netdev->features |= NETIF_F_TSO6; - else - netdev->features &= ~NETIF_F_TSO6; + netdev->features &= ~NETIF_F_TSO6; DPRINTK(PROBE, INFO, "TSO is %s\n", data ? "Enabled" : "Disabled"); adapter->tso_force = true; @@ -441,7 +427,6 @@ static void e1000_get_regs(struct net_device *netdev, struct ethtool_regs *regs, regs_buff[24] = (u32)phy_data; /* phy local receiver status */ regs_buff[25] = regs_buff[24]; /* phy remote receiver status */ if (hw->mac_type >= e1000_82540 && - hw->mac_type < e1000_82571 && hw->media_type == e1000_media_type_copper) { regs_buff[26] = er32(MANC); } @@ -554,10 +539,8 @@ static int e1000_set_eeprom(struct net_device *netdev, ret_val = e1000_write_eeprom(hw, first_word, last_word - first_word + 1, eeprom_buff); - /* Update the checksum over the first part of the EEPROM if needed - * and flush shadow RAM for 82573 conrollers */ - if ((ret_val == 0) && ((first_word <= EEPROM_CHECKSUM_REG) || - (hw->mac_type == e1000_82573))) + /* Update the checksum over the first part of the EEPROM if needed */ + if ((ret_val == 0) && (first_word <= EEPROM_CHECKSUM_REG)) e1000_update_eeprom_checksum(hw); kfree(eeprom_buff); @@ -568,31 +551,12 @@ static void e1000_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *drvinfo) { struct e1000_adapter *adapter = netdev_priv(netdev); - struct e1000_hw *hw = &adapter->hw; char firmware_version[32]; - u16 eeprom_data; strncpy(drvinfo->driver, e1000_driver_name, 32); strncpy(drvinfo->version, e1000_driver_version, 32); - /* EEPROM image version # is reported as firmware version # for - * 8257{1|2|3} controllers */ - e1000_read_eeprom(hw, 5, 1, &eeprom_data); - switch (hw->mac_type) { - case e1000_82571: - case e1000_82572: - case e1000_82573: - case e1000_80003es2lan: - case e1000_ich8lan: - sprintf(firmware_version, "%d.%d-%d", - (eeprom_data & 0xF000) >> 12, - (eeprom_data & 0x0FF0) >> 4, - eeprom_data & 0x000F); - break; - default: - sprintf(firmware_version, "N/A"); - } - + sprintf(firmware_version, "N/A"); strncpy(drvinfo->fw_version, firmware_version, 32); strncpy(drvinfo->bus_info, pci_name(adapter->pdev), 32); drvinfo->regdump_len = e1000_get_regs_len(netdev); @@ -781,21 +745,9 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data) /* The status register is Read Only, so a write should fail. * Some bits that get toggled are ignored. */ - switch (hw->mac_type) { + /* there are several bits on newer hardware that are r/w */ - case e1000_82571: - case e1000_82572: - case e1000_80003es2lan: - toggle = 0x7FFFF3FF; - break; - case e1000_82573: - case e1000_ich8lan: - toggle = 0x7FFFF033; - break; - default: - toggle = 0xFFFFF833; - break; - } + toggle = 0xFFFFF833; before = er32(STATUS); value = (er32(STATUS) & toggle); @@ -810,12 +762,10 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data) /* restore previous status */ ew32(STATUS, before); - if (hw->mac_type != e1000_ich8lan) { - REG_PATTERN_TEST(FCAL, 0xFFFFFFFF, 0xFFFFFFFF); - REG_PATTERN_TEST(FCAH, 0x0000FFFF, 0xFFFFFFFF); - REG_PATTERN_TEST(FCT, 0x0000FFFF, 0xFFFFFFFF); - REG_PATTERN_TEST(VET, 0x0000FFFF, 0xFFFFFFFF); - } + REG_PATTERN_TEST(FCAL, 0xFFFFFFFF, 0xFFFFFFFF); + REG_PATTERN_TEST(FCAH, 0x0000FFFF, 0xFFFFFFFF); + REG_PATTERN_TEST(FCT, 0x0000FFFF, 0xFFFFFFFF); + REG_PATTERN_TEST(VET, 0x0000FFFF, 0xFFFFFFFF); REG_PATTERN_TEST(RDTR, 0x0000FFFF, 0xFFFFFFFF); REG_PATTERN_TEST(RDBAH, 0xFFFFFFFF, 0xFFFFFFFF); @@ -830,8 +780,7 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data) REG_SET_AND_CHECK(RCTL, 0xFFFFFFFF, 0x00000000); - before = (hw->mac_type == e1000_ich8lan ? - 0x06C3B33E : 0x06DFB3FE); + before = 0x06DFB3FE; REG_SET_AND_CHECK(RCTL, before, 0x003FFFFB); REG_SET_AND_CHECK(TCTL, 0xFFFFFFFF, 0x00000000); @@ -839,12 +788,10 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data) REG_SET_AND_CHECK(RCTL, before, 0xFFFFFFFF); REG_PATTERN_TEST(RDBAL, 0xFFFFFFF0, 0xFFFFFFFF); - if (hw->mac_type != e1000_ich8lan) - REG_PATTERN_TEST(TXCW, 0xC000FFFF, 0x0000FFFF); + REG_PATTERN_TEST(TXCW, 0xC000FFFF, 0x0000FFFF); REG_PATTERN_TEST(TDBAL, 0xFFFFFFF0, 0xFFFFFFFF); REG_PATTERN_TEST(TIDV, 0x0000FFFF, 0x0000FFFF); - value = (hw->mac_type == e1000_ich8lan ? - E1000_RAR_ENTRIES_ICH8LAN : E1000_RAR_ENTRIES); + value = E1000_RAR_ENTRIES; for (i = 0; i < value; i++) { REG_PATTERN_TEST(RA + (((i << 1) + 1) << 2), 0x8003FFFF, 0xFFFFFFFF); @@ -859,8 +806,7 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data) } - value = (hw->mac_type == e1000_ich8lan ? - E1000_MC_TBL_SIZE_ICH8LAN : E1000_MC_TBL_SIZE); + value = E1000_MC_TBL_SIZE; for (i = 0; i < value; i++) REG_PATTERN_TEST(MTA + (i << 2), 0xFFFFFFFF, 0xFFFFFFFF); @@ -933,9 +879,6 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data) /* Test each interrupt */ for (; i < 10; i++) { - if (hw->mac_type == e1000_ich8lan && i == 8) - continue; - /* Interrupt to test */ mask = 1 << i; @@ -1289,35 +1232,20 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter) e1000_write_phy_reg(hw, PHY_CTRL, 0x9140); /* autoneg off */ e1000_write_phy_reg(hw, PHY_CTRL, 0x8140); - } else if (hw->phy_type == e1000_phy_gg82563) - e1000_write_phy_reg(hw, - GG82563_PHY_KMRN_MODE_CTRL, - 0x1CC); + } ctrl_reg = er32(CTRL); - if (hw->phy_type == e1000_phy_ife) { - /* force 100, set loopback */ - e1000_write_phy_reg(hw, PHY_CTRL, 0x6100); + /* force 1000, set loopback */ + e1000_write_phy_reg(hw, PHY_CTRL, 0x4140); - /* Now set up the MAC to the same speed/duplex as the PHY. */ - ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */ - ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */ - E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */ - E1000_CTRL_SPD_100 |/* Force Speed to 100 */ - E1000_CTRL_FD); /* Force Duplex to FULL */ - } else { - /* force 1000, set loopback */ - e1000_write_phy_reg(hw, PHY_CTRL, 0x4140); - - /* Now set up the MAC to the same speed/duplex as the PHY. */ - ctrl_reg = er32(CTRL); - ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */ - ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */ - E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */ - E1000_CTRL_SPD_1000 |/* Force Speed to 1000 */ - E1000_CTRL_FD); /* Force Duplex to FULL */ - } + /* Now set up the MAC to the same speed/duplex as the PHY. */ + ctrl_reg = er32(CTRL); + ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */ + ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */ + E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */ + E1000_CTRL_SPD_1000 |/* Force Speed to 1000 */ + E1000_CTRL_FD); /* Force Duplex to FULL */ if (hw->media_type == e1000_media_type_copper && hw->phy_type == e1000_phy_m88) @@ -1373,14 +1301,8 @@ static int e1000_set_phy_loopback(struct e1000_adapter *adapter) case e1000_82541_rev_2: case e1000_82547: case e1000_82547_rev_2: - case e1000_82571: - case e1000_82572: - case e1000_82573: - case e1000_80003es2lan: - case e1000_ich8lan: return e1000_integrated_phy_loopback(adapter); break; - default: /* Default PHY loopback work is to read the MII * control register and assert bit 14 (loopback mode). @@ -1409,14 +1331,6 @@ static int e1000_setup_loopback_test(struct e1000_adapter *adapter) case e1000_82546_rev_3: return e1000_set_phy_loopback(adapter); break; - case e1000_82571: - case e1000_82572: -#define E1000_SERDES_LB_ON 0x410 - e1000_set_phy_loopback(adapter); - ew32(SCTL, E1000_SERDES_LB_ON); - msleep(10); - return 0; - break; default: rctl = er32(RCTL); rctl |= E1000_RCTL_LBM_TCVR; @@ -1440,26 +1354,12 @@ static void e1000_loopback_cleanup(struct e1000_adapter *adapter) ew32(RCTL, rctl); switch (hw->mac_type) { - case e1000_82571: - case e1000_82572: - if (hw->media_type == e1000_media_type_fiber || - hw->media_type == e1000_media_type_internal_serdes) { -#define E1000_SERDES_LB_OFF 0x400 - ew32(SCTL, E1000_SERDES_LB_OFF); - msleep(10); - break; - } - /* Fall Through */ case e1000_82545: case e1000_82546: case e1000_82545_rev_3: case e1000_82546_rev_3: default: hw->autoneg = true; - if (hw->phy_type == e1000_phy_gg82563) - e1000_write_phy_reg(hw, - GG82563_PHY_KMRN_MODE_CTRL, - 0x180); e1000_read_phy_reg(hw, PHY_CTRL, &phy_reg); if (phy_reg & MII_CR_LOOPBACK) { phy_reg &= ~MII_CR_LOOPBACK; @@ -1560,17 +1460,6 @@ static int e1000_run_loopback_test(struct e1000_adapter *adapter) static int e1000_loopback_test(struct e1000_adapter *adapter, u64 *data) { - struct e1000_hw *hw = &adapter->hw; - - /* PHY loopback cannot be performed if SoL/IDER - * sessions are active */ - if (e1000_check_phy_reset_block(hw)) { - DPRINTK(DRV, ERR, "Cannot do PHY loopback test " - "when SoL/IDER is active.\n"); - *data = 0; - goto out; - } - *data = e1000_setup_desc_rings(adapter); if (*data) goto out; @@ -1592,13 +1481,13 @@ static int e1000_link_test(struct e1000_adapter *adapter, u64 *data) *data = 0; if (hw->media_type == e1000_media_type_internal_serdes) { int i = 0; - hw->serdes_link_down = true; + hw->serdes_has_link = false; /* On some blade server designs, link establishment * could take as long as 2-3 minutes */ do { e1000_check_for_link(hw); - if (!hw->serdes_link_down) + if (hw->serdes_has_link) return *data; msleep(20); } while (i++ < 3750); @@ -1716,15 +1605,11 @@ static int e1000_wol_exclusion(struct e1000_adapter *adapter, case E1000_DEV_ID_82545EM_COPPER: case E1000_DEV_ID_82546GB_QUAD_COPPER: case E1000_DEV_ID_82546GB_PCIE: - case E1000_DEV_ID_82571EB_SERDES_QUAD: /* these don't support WoL at all */ wol->supported = 0; break; case E1000_DEV_ID_82546EB_FIBER: case E1000_DEV_ID_82546GB_FIBER: - case E1000_DEV_ID_82571EB_FIBER: - case E1000_DEV_ID_82571EB_SERDES: - case E1000_DEV_ID_82571EB_COPPER: /* Wake events not supported on port B */ if (er32(STATUS) & E1000_STATUS_FUNC_1) { wol->supported = 0; @@ -1733,10 +1618,6 @@ static int e1000_wol_exclusion(struct e1000_adapter *adapter, /* return success for non excluded adapter ports */ retval = 0; break; - case E1000_DEV_ID_82571EB_QUAD_COPPER: - case E1000_DEV_ID_82571EB_QUAD_FIBER: - case E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE: - case E1000_DEV_ID_82571PT_QUAD_COPPER: case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3: /* quad port adapters only support WoL on port A */ if (!adapter->quad_port_a) { @@ -1872,30 +1753,15 @@ static int e1000_phys_id(struct net_device *netdev, u32 data) if (!data) data = INT_MAX; - if (hw->mac_type < e1000_82571) { - if (!adapter->blink_timer.function) { - init_timer(&adapter->blink_timer); - adapter->blink_timer.function = e1000_led_blink_callback; - adapter->blink_timer.data = (unsigned long)adapter; - } - e1000_setup_led(hw); - mod_timer(&adapter->blink_timer, jiffies); - msleep_interruptible(data * 1000); - del_timer_sync(&adapter->blink_timer); - } else if (hw->phy_type == e1000_phy_ife) { - if (!adapter->blink_timer.function) { - init_timer(&adapter->blink_timer); - adapter->blink_timer.function = e1000_led_blink_callback; - adapter->blink_timer.data = (unsigned long)adapter; - } - mod_timer(&adapter->blink_timer, jiffies); - msleep_interruptible(data * 1000); - del_timer_sync(&adapter->blink_timer); - e1000_write_phy_reg(&(adapter->hw), IFE_PHY_SPECIAL_CONTROL_LED, 0); - } else { - e1000_blink_led_start(hw); - msleep_interruptible(data * 1000); + if (!adapter->blink_timer.function) { + init_timer(&adapter->blink_timer); + adapter->blink_timer.function = e1000_led_blink_callback; + adapter->blink_timer.data = (unsigned long)adapter; } + e1000_setup_led(hw); + mod_timer(&adapter->blink_timer, jiffies); + msleep_interruptible(data * 1000); + del_timer_sync(&adapter->blink_timer); e1000_led_off(hw); clear_bit(E1000_LED_ON, &adapter->led_status); diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c index 45ac225a7aaa..8d7d87f12827 100644 --- a/drivers/net/e1000/e1000_hw.c +++ b/drivers/net/e1000/e1000_hw.c @@ -24,88 +24,34 @@ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 -*******************************************************************************/ + */ /* e1000_hw.c * Shared functions for accessing and configuring the MAC */ - #include "e1000_hw.h" -static s32 e1000_swfw_sync_acquire(struct e1000_hw *hw, u16 mask); -static void e1000_swfw_sync_release(struct e1000_hw *hw, u16 mask); -static s32 e1000_read_kmrn_reg(struct e1000_hw *hw, u32 reg_addr, u16 *data); -static s32 e1000_write_kmrn_reg(struct e1000_hw *hw, u32 reg_addr, u16 data); -static s32 e1000_get_software_semaphore(struct e1000_hw *hw); -static void e1000_release_software_semaphore(struct e1000_hw *hw); - -static u8 e1000_arc_subsystem_valid(struct e1000_hw *hw); static s32 e1000_check_downshift(struct e1000_hw *hw); static s32 e1000_check_polarity(struct e1000_hw *hw, e1000_rev_polarity *polarity); static void e1000_clear_hw_cntrs(struct e1000_hw *hw); static void e1000_clear_vfta(struct e1000_hw *hw); -static s32 e1000_commit_shadow_ram(struct e1000_hw *hw); static s32 e1000_config_dsp_after_link_change(struct e1000_hw *hw, bool link_up); static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw); static s32 e1000_detect_gig_phy(struct e1000_hw *hw); -static s32 e1000_erase_ich8_4k_segment(struct e1000_hw *hw, u32 bank); static s32 e1000_get_auto_rd_done(struct e1000_hw *hw); static s32 e1000_get_cable_length(struct e1000_hw *hw, u16 *min_length, u16 *max_length); -static s32 e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw); static s32 e1000_get_phy_cfg_done(struct e1000_hw *hw); -static s32 e1000_get_software_flag(struct e1000_hw *hw); -static s32 e1000_ich8_cycle_init(struct e1000_hw *hw); -static s32 e1000_ich8_flash_cycle(struct e1000_hw *hw, u32 timeout); static s32 e1000_id_led_init(struct e1000_hw *hw); -static s32 e1000_init_lcd_from_nvm_config_region(struct e1000_hw *hw, - u32 cnf_base_addr, - u32 cnf_size); -static s32 e1000_init_lcd_from_nvm(struct e1000_hw *hw); static void e1000_init_rx_addrs(struct e1000_hw *hw); -static void e1000_initialize_hardware_bits(struct e1000_hw *hw); -static bool e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw); -static s32 e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw); -static s32 e1000_mng_enable_host_if(struct e1000_hw *hw); -static s32 e1000_mng_host_if_write(struct e1000_hw *hw, u8 *buffer, u16 length, - u16 offset, u8 *sum); -static s32 e1000_mng_write_cmd_header(struct e1000_hw* hw, - struct e1000_host_mng_command_header - *hdr); -static s32 e1000_mng_write_commit(struct e1000_hw *hw); -static s32 e1000_phy_ife_get_info(struct e1000_hw *hw, - struct e1000_phy_info *phy_info); static s32 e1000_phy_igp_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info); -static s32 e1000_read_eeprom_eerd(struct e1000_hw *hw, u16 offset, u16 words, - u16 *data); -static s32 e1000_write_eeprom_eewr(struct e1000_hw *hw, u16 offset, u16 words, - u16 *data); -static s32 e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int eerd); static s32 e1000_phy_m88_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info); -static void e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw); -static s32 e1000_read_ich8_byte(struct e1000_hw *hw, u32 index, u8 *data); -static s32 e1000_verify_write_ich8_byte(struct e1000_hw *hw, u32 index, - u8 byte); -static s32 e1000_write_ich8_byte(struct e1000_hw *hw, u32 index, u8 byte); -static s32 e1000_read_ich8_word(struct e1000_hw *hw, u32 index, u16 *data); -static s32 e1000_read_ich8_data(struct e1000_hw *hw, u32 index, u32 size, - u16 *data); -static s32 e1000_write_ich8_data(struct e1000_hw *hw, u32 index, u32 size, - u16 data); -static s32 e1000_read_eeprom_ich8(struct e1000_hw *hw, u16 offset, u16 words, - u16 *data); -static s32 e1000_write_eeprom_ich8(struct e1000_hw *hw, u16 offset, u16 words, - u16 *data); -static void e1000_release_software_flag(struct e1000_hw *hw); static s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active); -static s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active); -static s32 e1000_set_pci_ex_no_snoop(struct e1000_hw *hw, u32 no_snoop); -static void e1000_set_pci_express_master_disable(struct e1000_hw *hw); static s32 e1000_wait_autoneg(struct e1000_hw *hw); static void e1000_write_reg_io(struct e1000_hw *hw, u32 offset, u32 value); static s32 e1000_set_phy_type(struct e1000_hw *hw); @@ -117,12 +63,11 @@ static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw); static s32 e1000_config_mac_to_phy(struct e1000_hw *hw); static void e1000_raise_mdi_clk(struct e1000_hw *hw, u32 *ctrl); static void e1000_lower_mdi_clk(struct e1000_hw *hw, u32 *ctrl); -static void e1000_shift_out_mdi_bits(struct e1000_hw *hw, u32 data, - u16 count); +static void e1000_shift_out_mdi_bits(struct e1000_hw *hw, u32 data, u16 count); static u16 e1000_shift_in_mdi_bits(struct e1000_hw *hw); static s32 e1000_phy_reset_dsp(struct e1000_hw *hw); static s32 e1000_write_eeprom_spi(struct e1000_hw *hw, u16 offset, - u16 words, u16 *data); + u16 words, u16 *data); static s32 e1000_write_eeprom_microwire(struct e1000_hw *hw, u16 offset, u16 words, u16 *data); static s32 e1000_spi_eeprom_ready(struct e1000_hw *hw); @@ -131,7 +76,7 @@ static void e1000_lower_ee_clk(struct e1000_hw *hw, u32 *eecd); static void e1000_shift_out_ee_bits(struct e1000_hw *hw, u16 data, u16 count); static s32 e1000_write_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr, u16 phy_data); -static s32 e1000_read_phy_reg_ex(struct e1000_hw *hw,u32 reg_addr, +static s32 e1000_read_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr, u16 *phy_data); static u16 e1000_shift_in_ee_bits(struct e1000_hw *hw, u16 count); static s32 e1000_acquire_eeprom(struct e1000_hw *hw); @@ -140,188 +85,164 @@ static void e1000_standby_eeprom(struct e1000_hw *hw); static s32 e1000_set_vco_speed(struct e1000_hw *hw); static s32 e1000_polarity_reversal_workaround(struct e1000_hw *hw); static s32 e1000_set_phy_mode(struct e1000_hw *hw); -static s32 e1000_host_if_read_cookie(struct e1000_hw *hw, u8 *buffer); -static u8 e1000_calculate_mng_checksum(char *buffer, u32 length); -static s32 e1000_configure_kmrn_for_10_100(struct e1000_hw *hw, u16 duplex); -static s32 e1000_configure_kmrn_for_1000(struct e1000_hw *hw); -static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data); -static s32 e1000_do_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data); +static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, + u16 *data); +static s32 e1000_do_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words, + u16 *data); /* IGP cable length table */ static const -u16 e1000_igp_cable_length_table[IGP01E1000_AGC_LENGTH_TABLE_SIZE] = - { 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, - 5, 10, 10, 10, 10, 10, 10, 10, 20, 20, 20, 20, 20, 25, 25, 25, - 25, 25, 25, 25, 30, 30, 30, 30, 40, 40, 40, 40, 40, 40, 40, 40, - 40, 50, 50, 50, 50, 50, 50, 50, 60, 60, 60, 60, 60, 60, 60, 60, - 60, 70, 70, 70, 70, 70, 70, 80, 80, 80, 80, 80, 80, 90, 90, 90, - 90, 90, 90, 90, 90, 90, 100, 100, 100, 100, 100, 100, 100, 100, 100, 100, - 100, 100, 100, 100, 110, 110, 110, 110, 110, 110, 110, 110, 110, 110, 110, 110, - 110, 110, 110, 110, 110, 110, 120, 120, 120, 120, 120, 120, 120, 120, 120, 120}; - -static const -u16 e1000_igp_2_cable_length_table[IGP02E1000_AGC_LENGTH_TABLE_SIZE] = - { 0, 0, 0, 0, 0, 0, 0, 0, 3, 5, 8, 11, 13, 16, 18, 21, - 0, 0, 0, 3, 6, 10, 13, 16, 19, 23, 26, 29, 32, 35, 38, 41, - 6, 10, 14, 18, 22, 26, 30, 33, 37, 41, 44, 48, 51, 54, 58, 61, - 21, 26, 31, 35, 40, 44, 49, 53, 57, 61, 65, 68, 72, 75, 79, 82, - 40, 45, 51, 56, 61, 66, 70, 75, 79, 83, 87, 91, 94, 98, 101, 104, - 60, 66, 72, 77, 82, 87, 92, 96, 100, 104, 108, 111, 114, 117, 119, 121, - 83, 89, 95, 100, 105, 109, 113, 116, 119, 122, 124, - 104, 109, 114, 118, 121, 124}; +u16 e1000_igp_cable_length_table[IGP01E1000_AGC_LENGTH_TABLE_SIZE] = { + 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, + 5, 10, 10, 10, 10, 10, 10, 10, 20, 20, 20, 20, 20, 25, 25, 25, + 25, 25, 25, 25, 30, 30, 30, 30, 40, 40, 40, 40, 40, 40, 40, 40, + 40, 50, 50, 50, 50, 50, 50, 50, 60, 60, 60, 60, 60, 60, 60, 60, + 60, 70, 70, 70, 70, 70, 70, 80, 80, 80, 80, 80, 80, 90, 90, 90, + 90, 90, 90, 90, 90, 90, 100, 100, 100, 100, 100, 100, 100, 100, 100, + 100, + 100, 100, 100, 100, 110, 110, 110, 110, 110, 110, 110, 110, 110, 110, + 110, 110, + 110, 110, 110, 110, 110, 110, 120, 120, 120, 120, 120, 120, 120, 120, + 120, 120 +}; static DEFINE_SPINLOCK(e1000_eeprom_lock); -/****************************************************************************** - * Set the phy type member in the hw struct. - * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ +/** + * e1000_set_phy_type - Set the phy type member in the hw struct. + * @hw: Struct containing variables accessed by shared code + */ static s32 e1000_set_phy_type(struct e1000_hw *hw) { - DEBUGFUNC("e1000_set_phy_type"); - - if (hw->mac_type == e1000_undefined) - return -E1000_ERR_PHY_TYPE; - - switch (hw->phy_id) { - case M88E1000_E_PHY_ID: - case M88E1000_I_PHY_ID: - case M88E1011_I_PHY_ID: - case M88E1111_I_PHY_ID: - hw->phy_type = e1000_phy_m88; - break; - case IGP01E1000_I_PHY_ID: - if (hw->mac_type == e1000_82541 || - hw->mac_type == e1000_82541_rev_2 || - hw->mac_type == e1000_82547 || - hw->mac_type == e1000_82547_rev_2) { - hw->phy_type = e1000_phy_igp; - break; - } - case IGP03E1000_E_PHY_ID: - hw->phy_type = e1000_phy_igp_3; - break; - case IFE_E_PHY_ID: - case IFE_PLUS_E_PHY_ID: - case IFE_C_E_PHY_ID: - hw->phy_type = e1000_phy_ife; - break; - case GG82563_E_PHY_ID: - if (hw->mac_type == e1000_80003es2lan) { - hw->phy_type = e1000_phy_gg82563; - break; - } - /* Fall Through */ - default: - /* Should never have loaded on this device */ - hw->phy_type = e1000_phy_undefined; - return -E1000_ERR_PHY_TYPE; - } - - return E1000_SUCCESS; -} - -/****************************************************************************** - * IGP phy init script - initializes the GbE PHY - * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ -static void e1000_phy_init_script(struct e1000_hw *hw) -{ - u32 ret_val; - u16 phy_saved_data; - - DEBUGFUNC("e1000_phy_init_script"); - - if (hw->phy_init_script) { - msleep(20); - - /* Save off the current value of register 0x2F5B to be restored at - * the end of this routine. */ - ret_val = e1000_read_phy_reg(hw, 0x2F5B, &phy_saved_data); - - /* Disabled the PHY transmitter */ - e1000_write_phy_reg(hw, 0x2F5B, 0x0003); + DEBUGFUNC("e1000_set_phy_type"); - msleep(20); + if (hw->mac_type == e1000_undefined) + return -E1000_ERR_PHY_TYPE; - e1000_write_phy_reg(hw,0x0000,0x0140); - - msleep(5); - - switch (hw->mac_type) { - case e1000_82541: - case e1000_82547: - e1000_write_phy_reg(hw, 0x1F95, 0x0001); - - e1000_write_phy_reg(hw, 0x1F71, 0xBD21); - - e1000_write_phy_reg(hw, 0x1F79, 0x0018); - - e1000_write_phy_reg(hw, 0x1F30, 0x1600); - - e1000_write_phy_reg(hw, 0x1F31, 0x0014); - - e1000_write_phy_reg(hw, 0x1F32, 0x161C); - - e1000_write_phy_reg(hw, 0x1F94, 0x0003); - - e1000_write_phy_reg(hw, 0x1F96, 0x003F); - - e1000_write_phy_reg(hw, 0x2010, 0x0008); - break; - - case e1000_82541_rev_2: - case e1000_82547_rev_2: - e1000_write_phy_reg(hw, 0x1F73, 0x0099); - break; - default: - break; - } - - e1000_write_phy_reg(hw, 0x0000, 0x3300); - - msleep(20); - - /* Now enable the transmitter */ - e1000_write_phy_reg(hw, 0x2F5B, phy_saved_data); - - if (hw->mac_type == e1000_82547) { - u16 fused, fine, coarse; - - /* Move to analog registers page */ - e1000_read_phy_reg(hw, IGP01E1000_ANALOG_SPARE_FUSE_STATUS, &fused); - - if (!(fused & IGP01E1000_ANALOG_SPARE_FUSE_ENABLED)) { - e1000_read_phy_reg(hw, IGP01E1000_ANALOG_FUSE_STATUS, &fused); + switch (hw->phy_id) { + case M88E1000_E_PHY_ID: + case M88E1000_I_PHY_ID: + case M88E1011_I_PHY_ID: + case M88E1111_I_PHY_ID: + hw->phy_type = e1000_phy_m88; + break; + case IGP01E1000_I_PHY_ID: + if (hw->mac_type == e1000_82541 || + hw->mac_type == e1000_82541_rev_2 || + hw->mac_type == e1000_82547 || + hw->mac_type == e1000_82547_rev_2) { + hw->phy_type = e1000_phy_igp; + break; + } + default: + /* Should never have loaded on this device */ + hw->phy_type = e1000_phy_undefined; + return -E1000_ERR_PHY_TYPE; + } - fine = fused & IGP01E1000_ANALOG_FUSE_FINE_MASK; - coarse = fused & IGP01E1000_ANALOG_FUSE_COARSE_MASK; + return E1000_SUCCESS; +} - if (coarse > IGP01E1000_ANALOG_FUSE_COARSE_THRESH) { - coarse -= IGP01E1000_ANALOG_FUSE_COARSE_10; - fine -= IGP01E1000_ANALOG_FUSE_FINE_1; - } else if (coarse == IGP01E1000_ANALOG_FUSE_COARSE_THRESH) - fine -= IGP01E1000_ANALOG_FUSE_FINE_10; +/** + * e1000_phy_init_script - IGP phy init script - initializes the GbE PHY + * @hw: Struct containing variables accessed by shared code + */ +static void e1000_phy_init_script(struct e1000_hw *hw) +{ + u32 ret_val; + u16 phy_saved_data; + + DEBUGFUNC("e1000_phy_init_script"); + + if (hw->phy_init_script) { + msleep(20); + + /* Save off the current value of register 0x2F5B to be restored at + * the end of this routine. */ + ret_val = e1000_read_phy_reg(hw, 0x2F5B, &phy_saved_data); + + /* Disabled the PHY transmitter */ + e1000_write_phy_reg(hw, 0x2F5B, 0x0003); + msleep(20); + + e1000_write_phy_reg(hw, 0x0000, 0x0140); + msleep(5); + + switch (hw->mac_type) { + case e1000_82541: + case e1000_82547: + e1000_write_phy_reg(hw, 0x1F95, 0x0001); + e1000_write_phy_reg(hw, 0x1F71, 0xBD21); + e1000_write_phy_reg(hw, 0x1F79, 0x0018); + e1000_write_phy_reg(hw, 0x1F30, 0x1600); + e1000_write_phy_reg(hw, 0x1F31, 0x0014); + e1000_write_phy_reg(hw, 0x1F32, 0x161C); + e1000_write_phy_reg(hw, 0x1F94, 0x0003); + e1000_write_phy_reg(hw, 0x1F96, 0x003F); + e1000_write_phy_reg(hw, 0x2010, 0x0008); + break; - fused = (fused & IGP01E1000_ANALOG_FUSE_POLY_MASK) | - (fine & IGP01E1000_ANALOG_FUSE_FINE_MASK) | - (coarse & IGP01E1000_ANALOG_FUSE_COARSE_MASK); + case e1000_82541_rev_2: + case e1000_82547_rev_2: + e1000_write_phy_reg(hw, 0x1F73, 0x0099); + break; + default: + break; + } - e1000_write_phy_reg(hw, IGP01E1000_ANALOG_FUSE_CONTROL, fused); - e1000_write_phy_reg(hw, IGP01E1000_ANALOG_FUSE_BYPASS, - IGP01E1000_ANALOG_FUSE_ENABLE_SW_CONTROL); - } - } - } + e1000_write_phy_reg(hw, 0x0000, 0x3300); + msleep(20); + + /* Now enable the transmitter */ + e1000_write_phy_reg(hw, 0x2F5B, phy_saved_data); + + if (hw->mac_type == e1000_82547) { + u16 fused, fine, coarse; + + /* Move to analog registers page */ + e1000_read_phy_reg(hw, + IGP01E1000_ANALOG_SPARE_FUSE_STATUS, + &fused); + + if (!(fused & IGP01E1000_ANALOG_SPARE_FUSE_ENABLED)) { + e1000_read_phy_reg(hw, + IGP01E1000_ANALOG_FUSE_STATUS, + &fused); + + fine = fused & IGP01E1000_ANALOG_FUSE_FINE_MASK; + coarse = + fused & IGP01E1000_ANALOG_FUSE_COARSE_MASK; + + if (coarse > + IGP01E1000_ANALOG_FUSE_COARSE_THRESH) { + coarse -= + IGP01E1000_ANALOG_FUSE_COARSE_10; + fine -= IGP01E1000_ANALOG_FUSE_FINE_1; + } else if (coarse == + IGP01E1000_ANALOG_FUSE_COARSE_THRESH) + fine -= IGP01E1000_ANALOG_FUSE_FINE_10; + + fused = + (fused & IGP01E1000_ANALOG_FUSE_POLY_MASK) | + (fine & IGP01E1000_ANALOG_FUSE_FINE_MASK) | + (coarse & + IGP01E1000_ANALOG_FUSE_COARSE_MASK); + + e1000_write_phy_reg(hw, + IGP01E1000_ANALOG_FUSE_CONTROL, + fused); + e1000_write_phy_reg(hw, + IGP01E1000_ANALOG_FUSE_BYPASS, + IGP01E1000_ANALOG_FUSE_ENABLE_SW_CONTROL); + } + } + } } -/****************************************************************************** - * Set the mac type member in the hw struct. - * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ +/** + * e1000_set_mac_type - Set the mac type member in the hw struct. + * @hw: Struct containing variables accessed by shared code + */ s32 e1000_set_mac_type(struct e1000_hw *hw) { DEBUGFUNC("e1000_set_mac_type"); @@ -397,61 +318,12 @@ s32 e1000_set_mac_type(struct e1000_hw *hw) case E1000_DEV_ID_82547GI: hw->mac_type = e1000_82547_rev_2; break; - case E1000_DEV_ID_82571EB_COPPER: - case E1000_DEV_ID_82571EB_FIBER: - case E1000_DEV_ID_82571EB_SERDES: - case E1000_DEV_ID_82571EB_SERDES_DUAL: - case E1000_DEV_ID_82571EB_SERDES_QUAD: - case E1000_DEV_ID_82571EB_QUAD_COPPER: - case E1000_DEV_ID_82571PT_QUAD_COPPER: - case E1000_DEV_ID_82571EB_QUAD_FIBER: - case E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE: - hw->mac_type = e1000_82571; - break; - case E1000_DEV_ID_82572EI_COPPER: - case E1000_DEV_ID_82572EI_FIBER: - case E1000_DEV_ID_82572EI_SERDES: - case E1000_DEV_ID_82572EI: - hw->mac_type = e1000_82572; - break; - case E1000_DEV_ID_82573E: - case E1000_DEV_ID_82573E_IAMT: - case E1000_DEV_ID_82573L: - hw->mac_type = e1000_82573; - break; - case E1000_DEV_ID_80003ES2LAN_COPPER_SPT: - case E1000_DEV_ID_80003ES2LAN_SERDES_SPT: - case E1000_DEV_ID_80003ES2LAN_COPPER_DPT: - case E1000_DEV_ID_80003ES2LAN_SERDES_DPT: - hw->mac_type = e1000_80003es2lan; - break; - case E1000_DEV_ID_ICH8_IGP_M_AMT: - case E1000_DEV_ID_ICH8_IGP_AMT: - case E1000_DEV_ID_ICH8_IGP_C: - case E1000_DEV_ID_ICH8_IFE: - case E1000_DEV_ID_ICH8_IFE_GT: - case E1000_DEV_ID_ICH8_IFE_G: - case E1000_DEV_ID_ICH8_IGP_M: - hw->mac_type = e1000_ich8lan; - break; default: /* Should never have loaded on this device */ return -E1000_ERR_MAC_TYPE; } switch (hw->mac_type) { - case e1000_ich8lan: - hw->swfwhw_semaphore_present = true; - hw->asf_firmware_present = true; - break; - case e1000_80003es2lan: - hw->swfw_sync_present = true; - /* fall through */ - case e1000_82571: - case e1000_82572: - case e1000_82573: - hw->eeprom_semaphore_present = true; - /* fall through */ case e1000_82541: case e1000_82547: case e1000_82541_rev_2: @@ -468,6058 +340,4500 @@ s32 e1000_set_mac_type(struct e1000_hw *hw) if (hw->mac_type == e1000_82543) hw->bad_tx_carr_stats_fd = true; - /* capable of receiving management packets to the host */ - if (hw->mac_type >= e1000_82571) - hw->has_manc2h = true; - - /* In rare occasions, ESB2 systems would end up started without - * the RX unit being turned on. - */ - if (hw->mac_type == e1000_80003es2lan) - hw->rx_needs_kicking = true; - if (hw->mac_type > e1000_82544) hw->has_smbus = true; return E1000_SUCCESS; } -/***************************************************************************** - * Set media type and TBI compatibility. - * - * hw - Struct containing variables accessed by shared code - * **************************************************************************/ +/** + * e1000_set_media_type - Set media type and TBI compatibility. + * @hw: Struct containing variables accessed by shared code + */ void e1000_set_media_type(struct e1000_hw *hw) { - u32 status; - - DEBUGFUNC("e1000_set_media_type"); - - if (hw->mac_type != e1000_82543) { - /* tbi_compatibility is only valid on 82543 */ - hw->tbi_compatibility_en = false; - } - - switch (hw->device_id) { - case E1000_DEV_ID_82545GM_SERDES: - case E1000_DEV_ID_82546GB_SERDES: - case E1000_DEV_ID_82571EB_SERDES: - case E1000_DEV_ID_82571EB_SERDES_DUAL: - case E1000_DEV_ID_82571EB_SERDES_QUAD: - case E1000_DEV_ID_82572EI_SERDES: - case E1000_DEV_ID_80003ES2LAN_SERDES_DPT: - hw->media_type = e1000_media_type_internal_serdes; - break; - default: - switch (hw->mac_type) { - case e1000_82542_rev2_0: - case e1000_82542_rev2_1: - hw->media_type = e1000_media_type_fiber; - break; - case e1000_ich8lan: - case e1000_82573: - /* The STATUS_TBIMODE bit is reserved or reused for the this - * device. - */ - hw->media_type = e1000_media_type_copper; - break; - default: - status = er32(STATUS); - if (status & E1000_STATUS_TBIMODE) { - hw->media_type = e1000_media_type_fiber; - /* tbi_compatibility not valid on fiber */ - hw->tbi_compatibility_en = false; - } else { - hw->media_type = e1000_media_type_copper; - } - break; - } - } + u32 status; + + DEBUGFUNC("e1000_set_media_type"); + + if (hw->mac_type != e1000_82543) { + /* tbi_compatibility is only valid on 82543 */ + hw->tbi_compatibility_en = false; + } + + switch (hw->device_id) { + case E1000_DEV_ID_82545GM_SERDES: + case E1000_DEV_ID_82546GB_SERDES: + hw->media_type = e1000_media_type_internal_serdes; + break; + default: + switch (hw->mac_type) { + case e1000_82542_rev2_0: + case e1000_82542_rev2_1: + hw->media_type = e1000_media_type_fiber; + break; + default: + status = er32(STATUS); + if (status & E1000_STATUS_TBIMODE) { + hw->media_type = e1000_media_type_fiber; + /* tbi_compatibility not valid on fiber */ + hw->tbi_compatibility_en = false; + } else { + hw->media_type = e1000_media_type_copper; + } + break; + } + } } -/****************************************************************************** - * Reset the transmit and receive units; mask and clear all interrupts. +/** + * e1000_reset_hw: reset the hardware completely + * @hw: Struct containing variables accessed by shared code * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ + * Reset the transmit and receive units; mask and clear all interrupts. + */ s32 e1000_reset_hw(struct e1000_hw *hw) { - u32 ctrl; - u32 ctrl_ext; - u32 icr; - u32 manc; - u32 led_ctrl; - u32 timeout; - u32 extcnf_ctrl; - s32 ret_val; - - DEBUGFUNC("e1000_reset_hw"); - - /* For 82542 (rev 2.0), disable MWI before issuing a device reset */ - if (hw->mac_type == e1000_82542_rev2_0) { - DEBUGOUT("Disabling MWI on 82542 rev 2.0\n"); - e1000_pci_clear_mwi(hw); - } - - if (hw->bus_type == e1000_bus_type_pci_express) { - /* Prevent the PCI-E bus from sticking if there is no TLP connection - * on the last TLP read/write transaction when MAC is reset. - */ - if (e1000_disable_pciex_master(hw) != E1000_SUCCESS) { - DEBUGOUT("PCI-E Master disable polling has failed.\n"); - } - } - - /* Clear interrupt mask to stop board from generating interrupts */ - DEBUGOUT("Masking off all interrupts\n"); - ew32(IMC, 0xffffffff); - - /* Disable the Transmit and Receive units. Then delay to allow - * any pending transactions to complete before we hit the MAC with - * the global reset. - */ - ew32(RCTL, 0); - ew32(TCTL, E1000_TCTL_PSP); - E1000_WRITE_FLUSH(); - - /* The tbi_compatibility_on Flag must be cleared when Rctl is cleared. */ - hw->tbi_compatibility_on = false; - - /* Delay to allow any outstanding PCI transactions to complete before - * resetting the device - */ - msleep(10); - - ctrl = er32(CTRL); - - /* Must reset the PHY before resetting the MAC */ - if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) { - ew32(CTRL, (ctrl | E1000_CTRL_PHY_RST)); - msleep(5); - } - - /* Must acquire the MDIO ownership before MAC reset. - * Ownership defaults to firmware after a reset. */ - if (hw->mac_type == e1000_82573) { - timeout = 10; - - extcnf_ctrl = er32(EXTCNF_CTRL); - extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP; - - do { - ew32(EXTCNF_CTRL, extcnf_ctrl); - extcnf_ctrl = er32(EXTCNF_CTRL); - - if (extcnf_ctrl & E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP) - break; - else - extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP; - - msleep(2); - timeout--; - } while (timeout); - } - - /* Workaround for ICH8 bit corruption issue in FIFO memory */ - if (hw->mac_type == e1000_ich8lan) { - /* Set Tx and Rx buffer allocation to 8k apiece. */ - ew32(PBA, E1000_PBA_8K); - /* Set Packet Buffer Size to 16k. */ - ew32(PBS, E1000_PBS_16K); - } - - /* Issue a global reset to the MAC. This will reset the chip's - * transmit, receive, DMA, and link units. It will not effect - * the current PCI configuration. The global reset bit is self- - * clearing, and should clear within a microsecond. - */ - DEBUGOUT("Issuing a global reset to MAC\n"); - - switch (hw->mac_type) { - case e1000_82544: - case e1000_82540: - case e1000_82545: - case e1000_82546: - case e1000_82541: - case e1000_82541_rev_2: - /* These controllers can't ack the 64-bit write when issuing the - * reset, so use IO-mapping as a workaround to issue the reset */ - E1000_WRITE_REG_IO(hw, CTRL, (ctrl | E1000_CTRL_RST)); - break; - case e1000_82545_rev_3: - case e1000_82546_rev_3: - /* Reset is performed on a shadow of the control register */ - ew32(CTRL_DUP, (ctrl | E1000_CTRL_RST)); - break; - case e1000_ich8lan: - if (!hw->phy_reset_disable && - e1000_check_phy_reset_block(hw) == E1000_SUCCESS) { - /* e1000_ich8lan PHY HW reset requires MAC CORE reset - * at the same time to make sure the interface between - * MAC and the external PHY is reset. - */ - ctrl |= E1000_CTRL_PHY_RST; - } - - e1000_get_software_flag(hw); - ew32(CTRL, (ctrl | E1000_CTRL_RST)); - msleep(5); - break; - default: - ew32(CTRL, (ctrl | E1000_CTRL_RST)); - break; - } - - /* After MAC reset, force reload of EEPROM to restore power-on settings to - * device. Later controllers reload the EEPROM automatically, so just wait - * for reload to complete. - */ - switch (hw->mac_type) { - case e1000_82542_rev2_0: - case e1000_82542_rev2_1: - case e1000_82543: - case e1000_82544: - /* Wait for reset to complete */ - udelay(10); - ctrl_ext = er32(CTRL_EXT); - ctrl_ext |= E1000_CTRL_EXT_EE_RST; - ew32(CTRL_EXT, ctrl_ext); - E1000_WRITE_FLUSH(); - /* Wait for EEPROM reload */ - msleep(2); - break; - case e1000_82541: - case e1000_82541_rev_2: - case e1000_82547: - case e1000_82547_rev_2: - /* Wait for EEPROM reload */ - msleep(20); - break; - case e1000_82573: - if (!e1000_is_onboard_nvm_eeprom(hw)) { - udelay(10); - ctrl_ext = er32(CTRL_EXT); - ctrl_ext |= E1000_CTRL_EXT_EE_RST; - ew32(CTRL_EXT, ctrl_ext); - E1000_WRITE_FLUSH(); - } - /* fall through */ - default: - /* Auto read done will delay 5ms or poll based on mac type */ - ret_val = e1000_get_auto_rd_done(hw); - if (ret_val) - return ret_val; - break; - } - - /* Disable HW ARPs on ASF enabled adapters */ - if (hw->mac_type >= e1000_82540 && hw->mac_type <= e1000_82547_rev_2) { - manc = er32(MANC); - manc &= ~(E1000_MANC_ARP_EN); - ew32(MANC, manc); - } - - if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) { - e1000_phy_init_script(hw); - - /* Configure activity LED after PHY reset */ - led_ctrl = er32(LEDCTL); - led_ctrl &= IGP_ACTIVITY_LED_MASK; - led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE); - ew32(LEDCTL, led_ctrl); - } - - /* Clear interrupt mask to stop board from generating interrupts */ - DEBUGOUT("Masking off all interrupts\n"); - ew32(IMC, 0xffffffff); - - /* Clear any pending interrupt events. */ - icr = er32(ICR); - - /* If MWI was previously enabled, reenable it. */ - if (hw->mac_type == e1000_82542_rev2_0) { - if (hw->pci_cmd_word & PCI_COMMAND_INVALIDATE) - e1000_pci_set_mwi(hw); - } - - if (hw->mac_type == e1000_ich8lan) { - u32 kab = er32(KABGTXD); - kab |= E1000_KABGTXD_BGSQLBIAS; - ew32(KABGTXD, kab); - } - - return E1000_SUCCESS; -} + u32 ctrl; + u32 ctrl_ext; + u32 icr; + u32 manc; + u32 led_ctrl; + s32 ret_val; -/****************************************************************************** - * - * Initialize a number of hardware-dependent bits - * - * hw: Struct containing variables accessed by shared code - * - * This function contains hardware limitation workarounds for PCI-E adapters - * - *****************************************************************************/ -static void e1000_initialize_hardware_bits(struct e1000_hw *hw) -{ - if ((hw->mac_type >= e1000_82571) && (!hw->initialize_hw_bits_disable)) { - /* Settings common to all PCI-express silicon */ - u32 reg_ctrl, reg_ctrl_ext; - u32 reg_tarc0, reg_tarc1; - u32 reg_tctl; - u32 reg_txdctl, reg_txdctl1; - - /* link autonegotiation/sync workarounds */ - reg_tarc0 = er32(TARC0); - reg_tarc0 &= ~((1 << 30)|(1 << 29)|(1 << 28)|(1 << 27)); - - /* Enable not-done TX descriptor counting */ - reg_txdctl = er32(TXDCTL); - reg_txdctl |= E1000_TXDCTL_COUNT_DESC; - ew32(TXDCTL, reg_txdctl); - reg_txdctl1 = er32(TXDCTL1); - reg_txdctl1 |= E1000_TXDCTL_COUNT_DESC; - ew32(TXDCTL1, reg_txdctl1); - - switch (hw->mac_type) { - case e1000_82571: - case e1000_82572: - /* Clear PHY TX compatible mode bits */ - reg_tarc1 = er32(TARC1); - reg_tarc1 &= ~((1 << 30)|(1 << 29)); - - /* link autonegotiation/sync workarounds */ - reg_tarc0 |= ((1 << 26)|(1 << 25)|(1 << 24)|(1 << 23)); - - /* TX ring control fixes */ - reg_tarc1 |= ((1 << 26)|(1 << 25)|(1 << 24)); - - /* Multiple read bit is reversed polarity */ - reg_tctl = er32(TCTL); - if (reg_tctl & E1000_TCTL_MULR) - reg_tarc1 &= ~(1 << 28); - else - reg_tarc1 |= (1 << 28); - - ew32(TARC1, reg_tarc1); - break; - case e1000_82573: - reg_ctrl_ext = er32(CTRL_EXT); - reg_ctrl_ext &= ~(1 << 23); - reg_ctrl_ext |= (1 << 22); - - /* TX byte count fix */ - reg_ctrl = er32(CTRL); - reg_ctrl &= ~(1 << 29); - - ew32(CTRL_EXT, reg_ctrl_ext); - ew32(CTRL, reg_ctrl); - break; - case e1000_80003es2lan: - /* improve small packet performace for fiber/serdes */ - if ((hw->media_type == e1000_media_type_fiber) || - (hw->media_type == e1000_media_type_internal_serdes)) { - reg_tarc0 &= ~(1 << 20); - } - - /* Multiple read bit is reversed polarity */ - reg_tctl = er32(TCTL); - reg_tarc1 = er32(TARC1); - if (reg_tctl & E1000_TCTL_MULR) - reg_tarc1 &= ~(1 << 28); - else - reg_tarc1 |= (1 << 28); - - ew32(TARC1, reg_tarc1); - break; - case e1000_ich8lan: - /* Reduce concurrent DMA requests to 3 from 4 */ - if ((hw->revision_id < 3) || - ((hw->device_id != E1000_DEV_ID_ICH8_IGP_M_AMT) && - (hw->device_id != E1000_DEV_ID_ICH8_IGP_M))) - reg_tarc0 |= ((1 << 29)|(1 << 28)); - - reg_ctrl_ext = er32(CTRL_EXT); - reg_ctrl_ext |= (1 << 22); - ew32(CTRL_EXT, reg_ctrl_ext); - - /* workaround TX hang with TSO=on */ - reg_tarc0 |= ((1 << 27)|(1 << 26)|(1 << 24)|(1 << 23)); - - /* Multiple read bit is reversed polarity */ - reg_tctl = er32(TCTL); - reg_tarc1 = er32(TARC1); - if (reg_tctl & E1000_TCTL_MULR) - reg_tarc1 &= ~(1 << 28); - else - reg_tarc1 |= (1 << 28); - - /* workaround TX hang with TSO=on */ - reg_tarc1 |= ((1 << 30)|(1 << 26)|(1 << 24)); - - ew32(TARC1, reg_tarc1); - break; - default: - break; - } - - ew32(TARC0, reg_tarc0); - } + DEBUGFUNC("e1000_reset_hw"); + + /* For 82542 (rev 2.0), disable MWI before issuing a device reset */ + if (hw->mac_type == e1000_82542_rev2_0) { + DEBUGOUT("Disabling MWI on 82542 rev 2.0\n"); + e1000_pci_clear_mwi(hw); + } + + /* Clear interrupt mask to stop board from generating interrupts */ + DEBUGOUT("Masking off all interrupts\n"); + ew32(IMC, 0xffffffff); + + /* Disable the Transmit and Receive units. Then delay to allow + * any pending transactions to complete before we hit the MAC with + * the global reset. + */ + ew32(RCTL, 0); + ew32(TCTL, E1000_TCTL_PSP); + E1000_WRITE_FLUSH(); + + /* The tbi_compatibility_on Flag must be cleared when Rctl is cleared. */ + hw->tbi_compatibility_on = false; + + /* Delay to allow any outstanding PCI transactions to complete before + * resetting the device + */ + msleep(10); + + ctrl = er32(CTRL); + + /* Must reset the PHY before resetting the MAC */ + if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) { + ew32(CTRL, (ctrl | E1000_CTRL_PHY_RST)); + msleep(5); + } + + /* Issue a global reset to the MAC. This will reset the chip's + * transmit, receive, DMA, and link units. It will not effect + * the current PCI configuration. The global reset bit is self- + * clearing, and should clear within a microsecond. + */ + DEBUGOUT("Issuing a global reset to MAC\n"); + + switch (hw->mac_type) { + case e1000_82544: + case e1000_82540: + case e1000_82545: + case e1000_82546: + case e1000_82541: + case e1000_82541_rev_2: + /* These controllers can't ack the 64-bit write when issuing the + * reset, so use IO-mapping as a workaround to issue the reset */ + E1000_WRITE_REG_IO(hw, CTRL, (ctrl | E1000_CTRL_RST)); + break; + case e1000_82545_rev_3: + case e1000_82546_rev_3: + /* Reset is performed on a shadow of the control register */ + ew32(CTRL_DUP, (ctrl | E1000_CTRL_RST)); + break; + default: + ew32(CTRL, (ctrl | E1000_CTRL_RST)); + break; + } + + /* After MAC reset, force reload of EEPROM to restore power-on settings to + * device. Later controllers reload the EEPROM automatically, so just wait + * for reload to complete. + */ + switch (hw->mac_type) { + case e1000_82542_rev2_0: + case e1000_82542_rev2_1: + case e1000_82543: + case e1000_82544: + /* Wait for reset to complete */ + udelay(10); + ctrl_ext = er32(CTRL_EXT); + ctrl_ext |= E1000_CTRL_EXT_EE_RST; + ew32(CTRL_EXT, ctrl_ext); + E1000_WRITE_FLUSH(); + /* Wait for EEPROM reload */ + msleep(2); + break; + case e1000_82541: + case e1000_82541_rev_2: + case e1000_82547: + case e1000_82547_rev_2: + /* Wait for EEPROM reload */ + msleep(20); + break; + default: + /* Auto read done will delay 5ms or poll based on mac type */ + ret_val = e1000_get_auto_rd_done(hw); + if (ret_val) + return ret_val; + break; + } + + /* Disable HW ARPs on ASF enabled adapters */ + if (hw->mac_type >= e1000_82540) { + manc = er32(MANC); + manc &= ~(E1000_MANC_ARP_EN); + ew32(MANC, manc); + } + + if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) { + e1000_phy_init_script(hw); + + /* Configure activity LED after PHY reset */ + led_ctrl = er32(LEDCTL); + led_ctrl &= IGP_ACTIVITY_LED_MASK; + led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE); + ew32(LEDCTL, led_ctrl); + } + + /* Clear interrupt mask to stop board from generating interrupts */ + DEBUGOUT("Masking off all interrupts\n"); + ew32(IMC, 0xffffffff); + + /* Clear any pending interrupt events. */ + icr = er32(ICR); + + /* If MWI was previously enabled, reenable it. */ + if (hw->mac_type == e1000_82542_rev2_0) { + if (hw->pci_cmd_word & PCI_COMMAND_INVALIDATE) + e1000_pci_set_mwi(hw); + } + + return E1000_SUCCESS; } -/****************************************************************************** - * Performs basic configuration of the adapter. - * - * hw - Struct containing variables accessed by shared code +/** + * e1000_init_hw: Performs basic configuration of the adapter. + * @hw: Struct containing variables accessed by shared code * * Assumes that the controller has previously been reset and is in a * post-reset uninitialized state. Initializes the receive address registers, * multicast table, and VLAN filter table. Calls routines to setup link * configuration and flow control settings. Clears all on-chip counters. Leaves * the transmit and receive units disabled and uninitialized. - *****************************************************************************/ + */ s32 e1000_init_hw(struct e1000_hw *hw) { - u32 ctrl; - u32 i; - s32 ret_val; - u32 mta_size; - u32 reg_data; - u32 ctrl_ext; - - DEBUGFUNC("e1000_init_hw"); - - /* force full DMA clock frequency for 10/100 on ICH8 A0-B0 */ - if ((hw->mac_type == e1000_ich8lan) && - ((hw->revision_id < 3) || - ((hw->device_id != E1000_DEV_ID_ICH8_IGP_M_AMT) && - (hw->device_id != E1000_DEV_ID_ICH8_IGP_M)))) { - reg_data = er32(STATUS); - reg_data &= ~0x80000000; - ew32(STATUS, reg_data); - } - - /* Initialize Identification LED */ - ret_val = e1000_id_led_init(hw); - if (ret_val) { - DEBUGOUT("Error Initializing Identification LED\n"); - return ret_val; - } - - /* Set the media type and TBI compatibility */ - e1000_set_media_type(hw); - - /* Must be called after e1000_set_media_type because media_type is used */ - e1000_initialize_hardware_bits(hw); - - /* Disabling VLAN filtering. */ - DEBUGOUT("Initializing the IEEE VLAN\n"); - /* VET hardcoded to standard value and VFTA removed in ICH8 LAN */ - if (hw->mac_type != e1000_ich8lan) { - if (hw->mac_type < e1000_82545_rev_3) - ew32(VET, 0); - e1000_clear_vfta(hw); - } - - /* For 82542 (rev 2.0), disable MWI and put the receiver into reset */ - if (hw->mac_type == e1000_82542_rev2_0) { - DEBUGOUT("Disabling MWI on 82542 rev 2.0\n"); - e1000_pci_clear_mwi(hw); - ew32(RCTL, E1000_RCTL_RST); - E1000_WRITE_FLUSH(); - msleep(5); - } - - /* Setup the receive address. This involves initializing all of the Receive - * Address Registers (RARs 0 - 15). - */ - e1000_init_rx_addrs(hw); - - /* For 82542 (rev 2.0), take the receiver out of reset and enable MWI */ - if (hw->mac_type == e1000_82542_rev2_0) { - ew32(RCTL, 0); - E1000_WRITE_FLUSH(); - msleep(1); - if (hw->pci_cmd_word & PCI_COMMAND_INVALIDATE) - e1000_pci_set_mwi(hw); - } - - /* Zero out the Multicast HASH table */ - DEBUGOUT("Zeroing the MTA\n"); - mta_size = E1000_MC_TBL_SIZE; - if (hw->mac_type == e1000_ich8lan) - mta_size = E1000_MC_TBL_SIZE_ICH8LAN; - for (i = 0; i < mta_size; i++) { - E1000_WRITE_REG_ARRAY(hw, MTA, i, 0); - /* use write flush to prevent Memory Write Block (MWB) from - * occuring when accessing our register space */ - E1000_WRITE_FLUSH(); - } - - /* Set the PCI priority bit correctly in the CTRL register. This - * determines if the adapter gives priority to receives, or if it - * gives equal priority to transmits and receives. Valid only on - * 82542 and 82543 silicon. - */ - if (hw->dma_fairness && hw->mac_type <= e1000_82543) { - ctrl = er32(CTRL); - ew32(CTRL, ctrl | E1000_CTRL_PRIOR); - } - - switch (hw->mac_type) { - case e1000_82545_rev_3: - case e1000_82546_rev_3: - break; - default: - /* Workaround for PCI-X problem when BIOS sets MMRBC incorrectly. */ - if (hw->bus_type == e1000_bus_type_pcix && e1000_pcix_get_mmrbc(hw) > 2048) - e1000_pcix_set_mmrbc(hw, 2048); - break; - } - - /* More time needed for PHY to initialize */ - if (hw->mac_type == e1000_ich8lan) - msleep(15); - - /* Call a subroutine to configure the link and setup flow control. */ - ret_val = e1000_setup_link(hw); - - /* Set the transmit descriptor write-back policy */ - if (hw->mac_type > e1000_82544) { - ctrl = er32(TXDCTL); - ctrl = (ctrl & ~E1000_TXDCTL_WTHRESH) | E1000_TXDCTL_FULL_TX_DESC_WB; - ew32(TXDCTL, ctrl); - } - - if (hw->mac_type == e1000_82573) { - e1000_enable_tx_pkt_filtering(hw); - } - - switch (hw->mac_type) { - default: - break; - case e1000_80003es2lan: - /* Enable retransmit on late collisions */ - reg_data = er32(TCTL); - reg_data |= E1000_TCTL_RTLC; - ew32(TCTL, reg_data); - - /* Configure Gigabit Carry Extend Padding */ - reg_data = er32(TCTL_EXT); - reg_data &= ~E1000_TCTL_EXT_GCEX_MASK; - reg_data |= DEFAULT_80003ES2LAN_TCTL_EXT_GCEX; - ew32(TCTL_EXT, reg_data); - - /* Configure Transmit Inter-Packet Gap */ - reg_data = er32(TIPG); - reg_data &= ~E1000_TIPG_IPGT_MASK; - reg_data |= DEFAULT_80003ES2LAN_TIPG_IPGT_1000; - ew32(TIPG, reg_data); - - reg_data = E1000_READ_REG_ARRAY(hw, FFLT, 0x0001); - reg_data &= ~0x00100000; - E1000_WRITE_REG_ARRAY(hw, FFLT, 0x0001, reg_data); - /* Fall through */ - case e1000_82571: - case e1000_82572: - case e1000_ich8lan: - ctrl = er32(TXDCTL1); - ctrl = (ctrl & ~E1000_TXDCTL_WTHRESH) | E1000_TXDCTL_FULL_TX_DESC_WB; - ew32(TXDCTL1, ctrl); - break; - } - - - if (hw->mac_type == e1000_82573) { - u32 gcr = er32(GCR); - gcr |= E1000_GCR_L1_ACT_WITHOUT_L0S_RX; - ew32(GCR, gcr); - } - - /* Clear all of the statistics registers (clear on read). It is - * important that we do this after we have tried to establish link - * because the symbol error count will increment wildly if there - * is no link. - */ - e1000_clear_hw_cntrs(hw); - - /* ICH8 No-snoop bits are opposite polarity. - * Set to snoop by default after reset. */ - if (hw->mac_type == e1000_ich8lan) - e1000_set_pci_ex_no_snoop(hw, PCI_EX_82566_SNOOP_ALL); - - if (hw->device_id == E1000_DEV_ID_82546GB_QUAD_COPPER || - hw->device_id == E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3) { - ctrl_ext = er32(CTRL_EXT); - /* Relaxed ordering must be disabled to avoid a parity - * error crash in a PCI slot. */ - ctrl_ext |= E1000_CTRL_EXT_RO_DIS; - ew32(CTRL_EXT, ctrl_ext); - } - - return ret_val; + u32 ctrl; + u32 i; + s32 ret_val; + u32 mta_size; + u32 ctrl_ext; + + DEBUGFUNC("e1000_init_hw"); + + /* Initialize Identification LED */ + ret_val = e1000_id_led_init(hw); + if (ret_val) { + DEBUGOUT("Error Initializing Identification LED\n"); + return ret_val; + } + + /* Set the media type and TBI compatibility */ + e1000_set_media_type(hw); + + /* Disabling VLAN filtering. */ + DEBUGOUT("Initializing the IEEE VLAN\n"); + if (hw->mac_type < e1000_82545_rev_3) + ew32(VET, 0); + e1000_clear_vfta(hw); + + /* For 82542 (rev 2.0), disable MWI and put the receiver into reset */ + if (hw->mac_type == e1000_82542_rev2_0) { + DEBUGOUT("Disabling MWI on 82542 rev 2.0\n"); + e1000_pci_clear_mwi(hw); + ew32(RCTL, E1000_RCTL_RST); + E1000_WRITE_FLUSH(); + msleep(5); + } + + /* Setup the receive address. This involves initializing all of the Receive + * Address Registers (RARs 0 - 15). + */ + e1000_init_rx_addrs(hw); + + /* For 82542 (rev 2.0), take the receiver out of reset and enable MWI */ + if (hw->mac_type == e1000_82542_rev2_0) { + ew32(RCTL, 0); + E1000_WRITE_FLUSH(); + msleep(1); + if (hw->pci_cmd_word & PCI_COMMAND_INVALIDATE) + e1000_pci_set_mwi(hw); + } + + /* Zero out the Multicast HASH table */ + DEBUGOUT("Zeroing the MTA\n"); + mta_size = E1000_MC_TBL_SIZE; + for (i = 0; i < mta_size; i++) { + E1000_WRITE_REG_ARRAY(hw, MTA, i, 0); + /* use write flush to prevent Memory Write Block (MWB) from + * occurring when accessing our register space */ + E1000_WRITE_FLUSH(); + } + + /* Set the PCI priority bit correctly in the CTRL register. This + * determines if the adapter gives priority to receives, or if it + * gives equal priority to transmits and receives. Valid only on + * 82542 and 82543 silicon. + */ + if (hw->dma_fairness && hw->mac_type <= e1000_82543) { + ctrl = er32(CTRL); + ew32(CTRL, ctrl | E1000_CTRL_PRIOR); + } + + switch (hw->mac_type) { + case e1000_82545_rev_3: + case e1000_82546_rev_3: + break; + default: + /* Workaround for PCI-X problem when BIOS sets MMRBC incorrectly. */ + if (hw->bus_type == e1000_bus_type_pcix + && e1000_pcix_get_mmrbc(hw) > 2048) + e1000_pcix_set_mmrbc(hw, 2048); + break; + } + + /* Call a subroutine to configure the link and setup flow control. */ + ret_val = e1000_setup_link(hw); + + /* Set the transmit descriptor write-back policy */ + if (hw->mac_type > e1000_82544) { + ctrl = er32(TXDCTL); + ctrl = + (ctrl & ~E1000_TXDCTL_WTHRESH) | + E1000_TXDCTL_FULL_TX_DESC_WB; + ew32(TXDCTL, ctrl); + } + + /* Clear all of the statistics registers (clear on read). It is + * important that we do this after we have tried to establish link + * because the symbol error count will increment wildly if there + * is no link. + */ + e1000_clear_hw_cntrs(hw); + + if (hw->device_id == E1000_DEV_ID_82546GB_QUAD_COPPER || + hw->device_id == E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3) { + ctrl_ext = er32(CTRL_EXT); + /* Relaxed ordering must be disabled to avoid a parity + * error crash in a PCI slot. */ + ctrl_ext |= E1000_CTRL_EXT_RO_DIS; + ew32(CTRL_EXT, ctrl_ext); + } + + return ret_val; } -/****************************************************************************** - * Adjust SERDES output amplitude based on EEPROM setting. - * - * hw - Struct containing variables accessed by shared code. - *****************************************************************************/ +/** + * e1000_adjust_serdes_amplitude - Adjust SERDES output amplitude based on EEPROM setting. + * @hw: Struct containing variables accessed by shared code. + */ static s32 e1000_adjust_serdes_amplitude(struct e1000_hw *hw) { - u16 eeprom_data; - s32 ret_val; - - DEBUGFUNC("e1000_adjust_serdes_amplitude"); - - if (hw->media_type != e1000_media_type_internal_serdes) - return E1000_SUCCESS; - - switch (hw->mac_type) { - case e1000_82545_rev_3: - case e1000_82546_rev_3: - break; - default: - return E1000_SUCCESS; - } - - ret_val = e1000_read_eeprom(hw, EEPROM_SERDES_AMPLITUDE, 1, &eeprom_data); - if (ret_val) { - return ret_val; - } - - if (eeprom_data != EEPROM_RESERVED_WORD) { - /* Adjust SERDES output amplitude only. */ - eeprom_data &= EEPROM_SERDES_AMPLITUDE_MASK; - ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_EXT_CTRL, eeprom_data); - if (ret_val) - return ret_val; - } - - return E1000_SUCCESS; + u16 eeprom_data; + s32 ret_val; + + DEBUGFUNC("e1000_adjust_serdes_amplitude"); + + if (hw->media_type != e1000_media_type_internal_serdes) + return E1000_SUCCESS; + + switch (hw->mac_type) { + case e1000_82545_rev_3: + case e1000_82546_rev_3: + break; + default: + return E1000_SUCCESS; + } + + ret_val = e1000_read_eeprom(hw, EEPROM_SERDES_AMPLITUDE, 1, + &eeprom_data); + if (ret_val) { + return ret_val; + } + + if (eeprom_data != EEPROM_RESERVED_WORD) { + /* Adjust SERDES output amplitude only. */ + eeprom_data &= EEPROM_SERDES_AMPLITUDE_MASK; + ret_val = + e1000_write_phy_reg(hw, M88E1000_PHY_EXT_CTRL, eeprom_data); + if (ret_val) + return ret_val; + } + + return E1000_SUCCESS; } -/****************************************************************************** - * Configures flow control and link settings. - * - * hw - Struct containing variables accessed by shared code +/** + * e1000_setup_link - Configures flow control and link settings. + * @hw: Struct containing variables accessed by shared code * - * Determines which flow control settings to use. Calls the apropriate media- + * Determines which flow control settings to use. Calls the appropriate media- * specific link configuration function. Configures the flow control settings. * Assuming the adapter has a valid link partner, a valid link should be * established. Assumes the hardware has previously been reset and the * transmitter and receiver are not enabled. - *****************************************************************************/ + */ s32 e1000_setup_link(struct e1000_hw *hw) { - u32 ctrl_ext; - s32 ret_val; - u16 eeprom_data; - - DEBUGFUNC("e1000_setup_link"); - - /* In the case of the phy reset being blocked, we already have a link. - * We do not have to set it up again. */ - if (e1000_check_phy_reset_block(hw)) - return E1000_SUCCESS; - - /* Read and store word 0x0F of the EEPROM. This word contains bits - * that determine the hardware's default PAUSE (flow control) mode, - * a bit that determines whether the HW defaults to enabling or - * disabling auto-negotiation, and the direction of the - * SW defined pins. If there is no SW over-ride of the flow - * control setting, then the variable hw->fc will - * be initialized based on a value in the EEPROM. - */ - if (hw->fc == E1000_FC_DEFAULT) { - switch (hw->mac_type) { - case e1000_ich8lan: - case e1000_82573: - hw->fc = E1000_FC_FULL; - break; - default: - ret_val = e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG, - 1, &eeprom_data); - if (ret_val) { - DEBUGOUT("EEPROM Read Error\n"); - return -E1000_ERR_EEPROM; - } - if ((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) == 0) - hw->fc = E1000_FC_NONE; - else if ((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) == - EEPROM_WORD0F_ASM_DIR) - hw->fc = E1000_FC_TX_PAUSE; - else - hw->fc = E1000_FC_FULL; - break; - } - } - - /* We want to save off the original Flow Control configuration just - * in case we get disconnected and then reconnected into a different - * hub or switch with different Flow Control capabilities. - */ - if (hw->mac_type == e1000_82542_rev2_0) - hw->fc &= (~E1000_FC_TX_PAUSE); - - if ((hw->mac_type < e1000_82543) && (hw->report_tx_early == 1)) - hw->fc &= (~E1000_FC_RX_PAUSE); - - hw->original_fc = hw->fc; - - DEBUGOUT1("After fix-ups FlowControl is now = %x\n", hw->fc); - - /* Take the 4 bits from EEPROM word 0x0F that determine the initial - * polarity value for the SW controlled pins, and setup the - * Extended Device Control reg with that info. - * This is needed because one of the SW controlled pins is used for - * signal detection. So this should be done before e1000_setup_pcs_link() - * or e1000_phy_setup() is called. - */ - if (hw->mac_type == e1000_82543) { - ret_val = e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG, - 1, &eeprom_data); - if (ret_val) { - DEBUGOUT("EEPROM Read Error\n"); - return -E1000_ERR_EEPROM; - } - ctrl_ext = ((eeprom_data & EEPROM_WORD0F_SWPDIO_EXT) << - SWDPIO__EXT_SHIFT); - ew32(CTRL_EXT, ctrl_ext); - } - - /* Call the necessary subroutine to configure the link. */ - ret_val = (hw->media_type == e1000_media_type_copper) ? - e1000_setup_copper_link(hw) : - e1000_setup_fiber_serdes_link(hw); - - /* Initialize the flow control address, type, and PAUSE timer - * registers to their default values. This is done even if flow - * control is disabled, because it does not hurt anything to - * initialize these registers. - */ - DEBUGOUT("Initializing the Flow Control address, type and timer regs\n"); - - /* FCAL/H and FCT are hardcoded to standard values in e1000_ich8lan. */ - if (hw->mac_type != e1000_ich8lan) { - ew32(FCT, FLOW_CONTROL_TYPE); - ew32(FCAH, FLOW_CONTROL_ADDRESS_HIGH); - ew32(FCAL, FLOW_CONTROL_ADDRESS_LOW); - } - - ew32(FCTTV, hw->fc_pause_time); - - /* Set the flow control receive threshold registers. Normally, - * these registers will be set to a default threshold that may be - * adjusted later by the driver's runtime code. However, if the - * ability to transmit pause frames in not enabled, then these - * registers will be set to 0. - */ - if (!(hw->fc & E1000_FC_TX_PAUSE)) { - ew32(FCRTL, 0); - ew32(FCRTH, 0); - } else { - /* We need to set up the Receive Threshold high and low water marks - * as well as (optionally) enabling the transmission of XON frames. - */ - if (hw->fc_send_xon) { - ew32(FCRTL, (hw->fc_low_water | E1000_FCRTL_XONE)); - ew32(FCRTH, hw->fc_high_water); - } else { - ew32(FCRTL, hw->fc_low_water); - ew32(FCRTH, hw->fc_high_water); - } - } - return ret_val; + u32 ctrl_ext; + s32 ret_val; + u16 eeprom_data; + + DEBUGFUNC("e1000_setup_link"); + + /* Read and store word 0x0F of the EEPROM. This word contains bits + * that determine the hardware's default PAUSE (flow control) mode, + * a bit that determines whether the HW defaults to enabling or + * disabling auto-negotiation, and the direction of the + * SW defined pins. If there is no SW over-ride of the flow + * control setting, then the variable hw->fc will + * be initialized based on a value in the EEPROM. + */ + if (hw->fc == E1000_FC_DEFAULT) { + ret_val = e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG, + 1, &eeprom_data); + if (ret_val) { + DEBUGOUT("EEPROM Read Error\n"); + return -E1000_ERR_EEPROM; + } + if ((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) == 0) + hw->fc = E1000_FC_NONE; + else if ((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) == + EEPROM_WORD0F_ASM_DIR) + hw->fc = E1000_FC_TX_PAUSE; + else + hw->fc = E1000_FC_FULL; + } + + /* We want to save off the original Flow Control configuration just + * in case we get disconnected and then reconnected into a different + * hub or switch with different Flow Control capabilities. + */ + if (hw->mac_type == e1000_82542_rev2_0) + hw->fc &= (~E1000_FC_TX_PAUSE); + + if ((hw->mac_type < e1000_82543) && (hw->report_tx_early == 1)) + hw->fc &= (~E1000_FC_RX_PAUSE); + + hw->original_fc = hw->fc; + + DEBUGOUT1("After fix-ups FlowControl is now = %x\n", hw->fc); + + /* Take the 4 bits from EEPROM word 0x0F that determine the initial + * polarity value for the SW controlled pins, and setup the + * Extended Device Control reg with that info. + * This is needed because one of the SW controlled pins is used for + * signal detection. So this should be done before e1000_setup_pcs_link() + * or e1000_phy_setup() is called. + */ + if (hw->mac_type == e1000_82543) { + ret_val = e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG, + 1, &eeprom_data); + if (ret_val) { + DEBUGOUT("EEPROM Read Error\n"); + return -E1000_ERR_EEPROM; + } + ctrl_ext = ((eeprom_data & EEPROM_WORD0F_SWPDIO_EXT) << + SWDPIO__EXT_SHIFT); + ew32(CTRL_EXT, ctrl_ext); + } + + /* Call the necessary subroutine to configure the link. */ + ret_val = (hw->media_type == e1000_media_type_copper) ? + e1000_setup_copper_link(hw) : e1000_setup_fiber_serdes_link(hw); + + /* Initialize the flow control address, type, and PAUSE timer + * registers to their default values. This is done even if flow + * control is disabled, because it does not hurt anything to + * initialize these registers. + */ + DEBUGOUT + ("Initializing the Flow Control address, type and timer regs\n"); + + ew32(FCT, FLOW_CONTROL_TYPE); + ew32(FCAH, FLOW_CONTROL_ADDRESS_HIGH); + ew32(FCAL, FLOW_CONTROL_ADDRESS_LOW); + + ew32(FCTTV, hw->fc_pause_time); + + /* Set the flow control receive threshold registers. Normally, + * these registers will be set to a default threshold that may be + * adjusted later by the driver's runtime code. However, if the + * ability to transmit pause frames in not enabled, then these + * registers will be set to 0. + */ + if (!(hw->fc & E1000_FC_TX_PAUSE)) { + ew32(FCRTL, 0); + ew32(FCRTH, 0); + } else { + /* We need to set up the Receive Threshold high and low water marks + * as well as (optionally) enabling the transmission of XON frames. + */ + if (hw->fc_send_xon) { + ew32(FCRTL, (hw->fc_low_water | E1000_FCRTL_XONE)); + ew32(FCRTH, hw->fc_high_water); + } else { + ew32(FCRTL, hw->fc_low_water); + ew32(FCRTH, hw->fc_high_water); + } + } + return ret_val; } -/****************************************************************************** - * Sets up link for a fiber based or serdes based adapter - * - * hw - Struct containing variables accessed by shared code +/** + * e1000_setup_fiber_serdes_link - prepare fiber or serdes link + * @hw: Struct containing variables accessed by shared code * * Manipulates Physical Coding Sublayer functions in order to configure * link. Assumes the hardware has been previously reset and the transmitter * and receiver are not enabled. - *****************************************************************************/ + */ static s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw) { - u32 ctrl; - u32 status; - u32 txcw = 0; - u32 i; - u32 signal = 0; - s32 ret_val; - - DEBUGFUNC("e1000_setup_fiber_serdes_link"); - - /* On 82571 and 82572 Fiber connections, SerDes loopback mode persists - * until explicitly turned off or a power cycle is performed. A read to - * the register does not indicate its status. Therefore, we ensure - * loopback mode is disabled during initialization. - */ - if (hw->mac_type == e1000_82571 || hw->mac_type == e1000_82572) - ew32(SCTL, E1000_DISABLE_SERDES_LOOPBACK); - - /* On adapters with a MAC newer than 82544, SWDP 1 will be - * set when the optics detect a signal. On older adapters, it will be - * cleared when there is a signal. This applies to fiber media only. - * If we're on serdes media, adjust the output amplitude to value - * set in the EEPROM. - */ - ctrl = er32(CTRL); - if (hw->media_type == e1000_media_type_fiber) - signal = (hw->mac_type > e1000_82544) ? E1000_CTRL_SWDPIN1 : 0; - - ret_val = e1000_adjust_serdes_amplitude(hw); - if (ret_val) - return ret_val; - - /* Take the link out of reset */ - ctrl &= ~(E1000_CTRL_LRST); - - /* Adjust VCO speed to improve BER performance */ - ret_val = e1000_set_vco_speed(hw); - if (ret_val) - return ret_val; - - e1000_config_collision_dist(hw); - - /* Check for a software override of the flow control settings, and setup - * the device accordingly. If auto-negotiation is enabled, then software - * will have to set the "PAUSE" bits to the correct value in the Tranmsit - * Config Word Register (TXCW) and re-start auto-negotiation. However, if - * auto-negotiation is disabled, then software will have to manually - * configure the two flow control enable bits in the CTRL register. - * - * The possible values of the "fc" parameter are: - * 0: Flow control is completely disabled - * 1: Rx flow control is enabled (we can receive pause frames, but - * not send pause frames). - * 2: Tx flow control is enabled (we can send pause frames but we do - * not support receiving pause frames). - * 3: Both Rx and TX flow control (symmetric) are enabled. - */ - switch (hw->fc) { - case E1000_FC_NONE: - /* Flow control is completely disabled by a software over-ride. */ - txcw = (E1000_TXCW_ANE | E1000_TXCW_FD); - break; - case E1000_FC_RX_PAUSE: - /* RX Flow control is enabled and TX Flow control is disabled by a - * software over-ride. Since there really isn't a way to advertise - * that we are capable of RX Pause ONLY, we will advertise that we - * support both symmetric and asymmetric RX PAUSE. Later, we will - * disable the adapter's ability to send PAUSE frames. - */ - txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK); - break; - case E1000_FC_TX_PAUSE: - /* TX Flow control is enabled, and RX Flow control is disabled, by a - * software over-ride. - */ - txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_ASM_DIR); - break; - case E1000_FC_FULL: - /* Flow control (both RX and TX) is enabled by a software over-ride. */ - txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK); - break; - default: - DEBUGOUT("Flow control param set incorrectly\n"); - return -E1000_ERR_CONFIG; - break; - } - - /* Since auto-negotiation is enabled, take the link out of reset (the link - * will be in reset, because we previously reset the chip). This will - * restart auto-negotiation. If auto-neogtiation is successful then the - * link-up status bit will be set and the flow control enable bits (RFCE - * and TFCE) will be set according to their negotiated value. - */ - DEBUGOUT("Auto-negotiation enabled\n"); - - ew32(TXCW, txcw); - ew32(CTRL, ctrl); - E1000_WRITE_FLUSH(); - - hw->txcw = txcw; - msleep(1); - - /* If we have a signal (the cable is plugged in) then poll for a "Link-Up" - * indication in the Device Status Register. Time-out if a link isn't - * seen in 500 milliseconds seconds (Auto-negotiation should complete in - * less than 500 milliseconds even if the other end is doing it in SW). - * For internal serdes, we just assume a signal is present, then poll. - */ - if (hw->media_type == e1000_media_type_internal_serdes || - (er32(CTRL) & E1000_CTRL_SWDPIN1) == signal) { - DEBUGOUT("Looking for Link\n"); - for (i = 0; i < (LINK_UP_TIMEOUT / 10); i++) { - msleep(10); - status = er32(STATUS); - if (status & E1000_STATUS_LU) break; - } - if (i == (LINK_UP_TIMEOUT / 10)) { - DEBUGOUT("Never got a valid link from auto-neg!!!\n"); - hw->autoneg_failed = 1; - /* AutoNeg failed to achieve a link, so we'll call - * e1000_check_for_link. This routine will force the link up if - * we detect a signal. This will allow us to communicate with - * non-autonegotiating link partners. - */ - ret_val = e1000_check_for_link(hw); - if (ret_val) { - DEBUGOUT("Error while checking for link\n"); - return ret_val; - } - hw->autoneg_failed = 0; - } else { - hw->autoneg_failed = 0; - DEBUGOUT("Valid Link Found\n"); - } - } else { - DEBUGOUT("No Signal Detected\n"); - } - return E1000_SUCCESS; + u32 ctrl; + u32 status; + u32 txcw = 0; + u32 i; + u32 signal = 0; + s32 ret_val; + + DEBUGFUNC("e1000_setup_fiber_serdes_link"); + + /* On adapters with a MAC newer than 82544, SWDP 1 will be + * set when the optics detect a signal. On older adapters, it will be + * cleared when there is a signal. This applies to fiber media only. + * If we're on serdes media, adjust the output amplitude to value + * set in the EEPROM. + */ + ctrl = er32(CTRL); + if (hw->media_type == e1000_media_type_fiber) + signal = (hw->mac_type > e1000_82544) ? E1000_CTRL_SWDPIN1 : 0; + + ret_val = e1000_adjust_serdes_amplitude(hw); + if (ret_val) + return ret_val; + + /* Take the link out of reset */ + ctrl &= ~(E1000_CTRL_LRST); + + /* Adjust VCO speed to improve BER performance */ + ret_val = e1000_set_vco_speed(hw); + if (ret_val) + return ret_val; + + e1000_config_collision_dist(hw); + + /* Check for a software override of the flow control settings, and setup + * the device accordingly. If auto-negotiation is enabled, then software + * will have to set the "PAUSE" bits to the correct value in the Tranmsit + * Config Word Register (TXCW) and re-start auto-negotiation. However, if + * auto-negotiation is disabled, then software will have to manually + * configure the two flow control enable bits in the CTRL register. + * + * The possible values of the "fc" parameter are: + * 0: Flow control is completely disabled + * 1: Rx flow control is enabled (we can receive pause frames, but + * not send pause frames). + * 2: Tx flow control is enabled (we can send pause frames but we do + * not support receiving pause frames). + * 3: Both Rx and TX flow control (symmetric) are enabled. + */ + switch (hw->fc) { + case E1000_FC_NONE: + /* Flow control is completely disabled by a software over-ride. */ + txcw = (E1000_TXCW_ANE | E1000_TXCW_FD); + break; + case E1000_FC_RX_PAUSE: + /* RX Flow control is enabled and TX Flow control is disabled by a + * software over-ride. Since there really isn't a way to advertise + * that we are capable of RX Pause ONLY, we will advertise that we + * support both symmetric and asymmetric RX PAUSE. Later, we will + * disable the adapter's ability to send PAUSE frames. + */ + txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK); + break; + case E1000_FC_TX_PAUSE: + /* TX Flow control is enabled, and RX Flow control is disabled, by a + * software over-ride. + */ + txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_ASM_DIR); + break; + case E1000_FC_FULL: + /* Flow control (both RX and TX) is enabled by a software over-ride. */ + txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK); + break; + default: + DEBUGOUT("Flow control param set incorrectly\n"); + return -E1000_ERR_CONFIG; + break; + } + + /* Since auto-negotiation is enabled, take the link out of reset (the link + * will be in reset, because we previously reset the chip). This will + * restart auto-negotiation. If auto-negotiation is successful then the + * link-up status bit will be set and the flow control enable bits (RFCE + * and TFCE) will be set according to their negotiated value. + */ + DEBUGOUT("Auto-negotiation enabled\n"); + + ew32(TXCW, txcw); + ew32(CTRL, ctrl); + E1000_WRITE_FLUSH(); + + hw->txcw = txcw; + msleep(1); + + /* If we have a signal (the cable is plugged in) then poll for a "Link-Up" + * indication in the Device Status Register. Time-out if a link isn't + * seen in 500 milliseconds seconds (Auto-negotiation should complete in + * less than 500 milliseconds even if the other end is doing it in SW). + * For internal serdes, we just assume a signal is present, then poll. + */ + if (hw->media_type == e1000_media_type_internal_serdes || + (er32(CTRL) & E1000_CTRL_SWDPIN1) == signal) { + DEBUGOUT("Looking for Link\n"); + for (i = 0; i < (LINK_UP_TIMEOUT / 10); i++) { + msleep(10); + status = er32(STATUS); + if (status & E1000_STATUS_LU) + break; + } + if (i == (LINK_UP_TIMEOUT / 10)) { + DEBUGOUT("Never got a valid link from auto-neg!!!\n"); + hw->autoneg_failed = 1; + /* AutoNeg failed to achieve a link, so we'll call + * e1000_check_for_link. This routine will force the link up if + * we detect a signal. This will allow us to communicate with + * non-autonegotiating link partners. + */ + ret_val = e1000_check_for_link(hw); + if (ret_val) { + DEBUGOUT("Error while checking for link\n"); + return ret_val; + } + hw->autoneg_failed = 0; + } else { + hw->autoneg_failed = 0; + DEBUGOUT("Valid Link Found\n"); + } + } else { + DEBUGOUT("No Signal Detected\n"); + } + return E1000_SUCCESS; } -/****************************************************************************** -* Make sure we have a valid PHY and change PHY mode before link setup. -* -* hw - Struct containing variables accessed by shared code -******************************************************************************/ +/** + * e1000_copper_link_preconfig - early configuration for copper + * @hw: Struct containing variables accessed by shared code + * + * Make sure we have a valid PHY and change PHY mode before link setup. + */ static s32 e1000_copper_link_preconfig(struct e1000_hw *hw) { - u32 ctrl; - s32 ret_val; - u16 phy_data; - - DEBUGFUNC("e1000_copper_link_preconfig"); - - ctrl = er32(CTRL); - /* With 82543, we need to force speed and duplex on the MAC equal to what - * the PHY speed and duplex configuration is. In addition, we need to - * perform a hardware reset on the PHY to take it out of reset. - */ - if (hw->mac_type > e1000_82543) { - ctrl |= E1000_CTRL_SLU; - ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX); - ew32(CTRL, ctrl); - } else { - ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX | E1000_CTRL_SLU); - ew32(CTRL, ctrl); - ret_val = e1000_phy_hw_reset(hw); - if (ret_val) - return ret_val; - } - - /* Make sure we have a valid PHY */ - ret_val = e1000_detect_gig_phy(hw); - if (ret_val) { - DEBUGOUT("Error, did not detect valid phy.\n"); - return ret_val; - } - DEBUGOUT1("Phy ID = %x \n", hw->phy_id); - - /* Set PHY to class A mode (if necessary) */ - ret_val = e1000_set_phy_mode(hw); - if (ret_val) - return ret_val; - - if ((hw->mac_type == e1000_82545_rev_3) || - (hw->mac_type == e1000_82546_rev_3)) { - ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); - phy_data |= 0x00000008; - ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data); - } - - if (hw->mac_type <= e1000_82543 || - hw->mac_type == e1000_82541 || hw->mac_type == e1000_82547 || - hw->mac_type == e1000_82541_rev_2 || hw->mac_type == e1000_82547_rev_2) - hw->phy_reset_disable = false; - - return E1000_SUCCESS; -} + u32 ctrl; + s32 ret_val; + u16 phy_data; + DEBUGFUNC("e1000_copper_link_preconfig"); -/******************************************************************** -* Copper link setup for e1000_phy_igp series. -* -* hw - Struct containing variables accessed by shared code -*********************************************************************/ -static s32 e1000_copper_link_igp_setup(struct e1000_hw *hw) -{ - u32 led_ctrl; - s32 ret_val; - u16 phy_data; - - DEBUGFUNC("e1000_copper_link_igp_setup"); - - if (hw->phy_reset_disable) - return E1000_SUCCESS; - - ret_val = e1000_phy_reset(hw); - if (ret_val) { - DEBUGOUT("Error Resetting the PHY\n"); - return ret_val; - } - - /* Wait 15ms for MAC to configure PHY from eeprom settings */ - msleep(15); - if (hw->mac_type != e1000_ich8lan) { - /* Configure activity LED after PHY reset */ - led_ctrl = er32(LEDCTL); - led_ctrl &= IGP_ACTIVITY_LED_MASK; - led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE); - ew32(LEDCTL, led_ctrl); - } - - /* The NVM settings will configure LPLU in D3 for IGP2 and IGP3 PHYs */ - if (hw->phy_type == e1000_phy_igp) { - /* disable lplu d3 during driver init */ - ret_val = e1000_set_d3_lplu_state(hw, false); - if (ret_val) { - DEBUGOUT("Error Disabling LPLU D3\n"); - return ret_val; - } - } - - /* disable lplu d0 during driver init */ - ret_val = e1000_set_d0_lplu_state(hw, false); - if (ret_val) { - DEBUGOUT("Error Disabling LPLU D0\n"); - return ret_val; - } - /* Configure mdi-mdix settings */ - ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, &phy_data); - if (ret_val) - return ret_val; - - if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) { - hw->dsp_config_state = e1000_dsp_config_disabled; - /* Force MDI for earlier revs of the IGP PHY */ - phy_data &= ~(IGP01E1000_PSCR_AUTO_MDIX | IGP01E1000_PSCR_FORCE_MDI_MDIX); - hw->mdix = 1; - - } else { - hw->dsp_config_state = e1000_dsp_config_enabled; - phy_data &= ~IGP01E1000_PSCR_AUTO_MDIX; - - switch (hw->mdix) { - case 1: - phy_data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX; - break; - case 2: - phy_data |= IGP01E1000_PSCR_FORCE_MDI_MDIX; - break; - case 0: - default: - phy_data |= IGP01E1000_PSCR_AUTO_MDIX; - break; - } - } - ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, phy_data); - if (ret_val) - return ret_val; - - /* set auto-master slave resolution settings */ - if (hw->autoneg) { - e1000_ms_type phy_ms_setting = hw->master_slave; - - if (hw->ffe_config_state == e1000_ffe_config_active) - hw->ffe_config_state = e1000_ffe_config_enabled; - - if (hw->dsp_config_state == e1000_dsp_config_activated) - hw->dsp_config_state = e1000_dsp_config_enabled; - - /* when autonegotiation advertisment is only 1000Mbps then we - * should disable SmartSpeed and enable Auto MasterSlave - * resolution as hardware default. */ - if (hw->autoneg_advertised == ADVERTISE_1000_FULL) { - /* Disable SmartSpeed */ - ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, - &phy_data); - if (ret_val) - return ret_val; - phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED; - ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, - phy_data); - if (ret_val) - return ret_val; - /* Set auto Master/Slave resolution process */ - ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_data); - if (ret_val) - return ret_val; - phy_data &= ~CR_1000T_MS_ENABLE; - ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, phy_data); - if (ret_val) - return ret_val; - } - - ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_data); - if (ret_val) - return ret_val; - - /* load defaults for future use */ - hw->original_master_slave = (phy_data & CR_1000T_MS_ENABLE) ? - ((phy_data & CR_1000T_MS_VALUE) ? - e1000_ms_force_master : - e1000_ms_force_slave) : - e1000_ms_auto; - - switch (phy_ms_setting) { - case e1000_ms_force_master: - phy_data |= (CR_1000T_MS_ENABLE | CR_1000T_MS_VALUE); - break; - case e1000_ms_force_slave: - phy_data |= CR_1000T_MS_ENABLE; - phy_data &= ~(CR_1000T_MS_VALUE); - break; - case e1000_ms_auto: - phy_data &= ~CR_1000T_MS_ENABLE; - default: - break; - } - ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, phy_data); - if (ret_val) - return ret_val; - } - - return E1000_SUCCESS; + ctrl = er32(CTRL); + /* With 82543, we need to force speed and duplex on the MAC equal to what + * the PHY speed and duplex configuration is. In addition, we need to + * perform a hardware reset on the PHY to take it out of reset. + */ + if (hw->mac_type > e1000_82543) { + ctrl |= E1000_CTRL_SLU; + ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX); + ew32(CTRL, ctrl); + } else { + ctrl |= + (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX | E1000_CTRL_SLU); + ew32(CTRL, ctrl); + ret_val = e1000_phy_hw_reset(hw); + if (ret_val) + return ret_val; + } + + /* Make sure we have a valid PHY */ + ret_val = e1000_detect_gig_phy(hw); + if (ret_val) { + DEBUGOUT("Error, did not detect valid phy.\n"); + return ret_val; + } + DEBUGOUT1("Phy ID = %x \n", hw->phy_id); + + /* Set PHY to class A mode (if necessary) */ + ret_val = e1000_set_phy_mode(hw); + if (ret_val) + return ret_val; + + if ((hw->mac_type == e1000_82545_rev_3) || + (hw->mac_type == e1000_82546_rev_3)) { + ret_val = + e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); + phy_data |= 0x00000008; + ret_val = + e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data); + } + + if (hw->mac_type <= e1000_82543 || + hw->mac_type == e1000_82541 || hw->mac_type == e1000_82547 || + hw->mac_type == e1000_82541_rev_2 + || hw->mac_type == e1000_82547_rev_2) + hw->phy_reset_disable = false; + + return E1000_SUCCESS; } -/******************************************************************** -* Copper link setup for e1000_phy_gg82563 series. -* -* hw - Struct containing variables accessed by shared code -*********************************************************************/ -static s32 e1000_copper_link_ggp_setup(struct e1000_hw *hw) +/** + * e1000_copper_link_igp_setup - Copper link setup for e1000_phy_igp series. + * @hw: Struct containing variables accessed by shared code + */ +static s32 e1000_copper_link_igp_setup(struct e1000_hw *hw) { - s32 ret_val; - u16 phy_data; - u32 reg_data; - - DEBUGFUNC("e1000_copper_link_ggp_setup"); - - if (!hw->phy_reset_disable) { - - /* Enable CRS on TX for half-duplex operation. */ - ret_val = e1000_read_phy_reg(hw, GG82563_PHY_MAC_SPEC_CTRL, - &phy_data); - if (ret_val) - return ret_val; - - phy_data |= GG82563_MSCR_ASSERT_CRS_ON_TX; - /* Use 25MHz for both link down and 1000BASE-T for Tx clock */ - phy_data |= GG82563_MSCR_TX_CLK_1000MBPS_25MHZ; - - ret_val = e1000_write_phy_reg(hw, GG82563_PHY_MAC_SPEC_CTRL, - phy_data); - if (ret_val) - return ret_val; - - /* Options: - * MDI/MDI-X = 0 (default) - * 0 - Auto for all speeds - * 1 - MDI mode - * 2 - MDI-X mode - * 3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes) - */ - ret_val = e1000_read_phy_reg(hw, GG82563_PHY_SPEC_CTRL, &phy_data); - if (ret_val) - return ret_val; - - phy_data &= ~GG82563_PSCR_CROSSOVER_MODE_MASK; - - switch (hw->mdix) { - case 1: - phy_data |= GG82563_PSCR_CROSSOVER_MODE_MDI; - break; - case 2: - phy_data |= GG82563_PSCR_CROSSOVER_MODE_MDIX; - break; - case 0: - default: - phy_data |= GG82563_PSCR_CROSSOVER_MODE_AUTO; - break; - } - - /* Options: - * disable_polarity_correction = 0 (default) - * Automatic Correction for Reversed Cable Polarity - * 0 - Disabled - * 1 - Enabled - */ - phy_data &= ~GG82563_PSCR_POLARITY_REVERSAL_DISABLE; - if (hw->disable_polarity_correction == 1) - phy_data |= GG82563_PSCR_POLARITY_REVERSAL_DISABLE; - ret_val = e1000_write_phy_reg(hw, GG82563_PHY_SPEC_CTRL, phy_data); - - if (ret_val) - return ret_val; - - /* SW Reset the PHY so all changes take effect */ - ret_val = e1000_phy_reset(hw); - if (ret_val) { - DEBUGOUT("Error Resetting the PHY\n"); - return ret_val; - } - } /* phy_reset_disable */ - - if (hw->mac_type == e1000_80003es2lan) { - /* Bypass RX and TX FIFO's */ - ret_val = e1000_write_kmrn_reg(hw, E1000_KUMCTRLSTA_OFFSET_FIFO_CTRL, - E1000_KUMCTRLSTA_FIFO_CTRL_RX_BYPASS | - E1000_KUMCTRLSTA_FIFO_CTRL_TX_BYPASS); - if (ret_val) - return ret_val; - - ret_val = e1000_read_phy_reg(hw, GG82563_PHY_SPEC_CTRL_2, &phy_data); - if (ret_val) - return ret_val; - - phy_data &= ~GG82563_PSCR2_REVERSE_AUTO_NEG; - ret_val = e1000_write_phy_reg(hw, GG82563_PHY_SPEC_CTRL_2, phy_data); - - if (ret_val) - return ret_val; - - reg_data = er32(CTRL_EXT); - reg_data &= ~(E1000_CTRL_EXT_LINK_MODE_MASK); - ew32(CTRL_EXT, reg_data); - - ret_val = e1000_read_phy_reg(hw, GG82563_PHY_PWR_MGMT_CTRL, - &phy_data); - if (ret_val) - return ret_val; - - /* Do not init these registers when the HW is in IAMT mode, since the - * firmware will have already initialized them. We only initialize - * them if the HW is not in IAMT mode. - */ - if (!e1000_check_mng_mode(hw)) { - /* Enable Electrical Idle on the PHY */ - phy_data |= GG82563_PMCR_ENABLE_ELECTRICAL_IDLE; - ret_val = e1000_write_phy_reg(hw, GG82563_PHY_PWR_MGMT_CTRL, - phy_data); - if (ret_val) - return ret_val; - - ret_val = e1000_read_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL, - &phy_data); - if (ret_val) - return ret_val; - - phy_data &= ~GG82563_KMCR_PASS_FALSE_CARRIER; - ret_val = e1000_write_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL, - phy_data); - - if (ret_val) - return ret_val; - } - - /* Workaround: Disable padding in Kumeran interface in the MAC - * and in the PHY to avoid CRC errors. - */ - ret_val = e1000_read_phy_reg(hw, GG82563_PHY_INBAND_CTRL, - &phy_data); - if (ret_val) - return ret_val; - phy_data |= GG82563_ICR_DIS_PADDING; - ret_val = e1000_write_phy_reg(hw, GG82563_PHY_INBAND_CTRL, - phy_data); - if (ret_val) - return ret_val; - } - - return E1000_SUCCESS; + u32 led_ctrl; + s32 ret_val; + u16 phy_data; + + DEBUGFUNC("e1000_copper_link_igp_setup"); + + if (hw->phy_reset_disable) + return E1000_SUCCESS; + + ret_val = e1000_phy_reset(hw); + if (ret_val) { + DEBUGOUT("Error Resetting the PHY\n"); + return ret_val; + } + + /* Wait 15ms for MAC to configure PHY from eeprom settings */ + msleep(15); + /* Configure activity LED after PHY reset */ + led_ctrl = er32(LEDCTL); + led_ctrl &= IGP_ACTIVITY_LED_MASK; + led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE); + ew32(LEDCTL, led_ctrl); + + /* The NVM settings will configure LPLU in D3 for IGP2 and IGP3 PHYs */ + if (hw->phy_type == e1000_phy_igp) { + /* disable lplu d3 during driver init */ + ret_val = e1000_set_d3_lplu_state(hw, false); + if (ret_val) { + DEBUGOUT("Error Disabling LPLU D3\n"); + return ret_val; + } + } + + /* Configure mdi-mdix settings */ + ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, &phy_data); + if (ret_val) + return ret_val; + + if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) { + hw->dsp_config_state = e1000_dsp_config_disabled; + /* Force MDI for earlier revs of the IGP PHY */ + phy_data &= + ~(IGP01E1000_PSCR_AUTO_MDIX | + IGP01E1000_PSCR_FORCE_MDI_MDIX); + hw->mdix = 1; + + } else { + hw->dsp_config_state = e1000_dsp_config_enabled; + phy_data &= ~IGP01E1000_PSCR_AUTO_MDIX; + + switch (hw->mdix) { + case 1: + phy_data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX; + break; + case 2: + phy_data |= IGP01E1000_PSCR_FORCE_MDI_MDIX; + break; + case 0: + default: + phy_data |= IGP01E1000_PSCR_AUTO_MDIX; + break; + } + } + ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, phy_data); + if (ret_val) + return ret_val; + + /* set auto-master slave resolution settings */ + if (hw->autoneg) { + e1000_ms_type phy_ms_setting = hw->master_slave; + + if (hw->ffe_config_state == e1000_ffe_config_active) + hw->ffe_config_state = e1000_ffe_config_enabled; + + if (hw->dsp_config_state == e1000_dsp_config_activated) + hw->dsp_config_state = e1000_dsp_config_enabled; + + /* when autonegotiation advertisement is only 1000Mbps then we + * should disable SmartSpeed and enable Auto MasterSlave + * resolution as hardware default. */ + if (hw->autoneg_advertised == ADVERTISE_1000_FULL) { + /* Disable SmartSpeed */ + ret_val = + e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, + &phy_data); + if (ret_val) + return ret_val; + phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED; + ret_val = + e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, + phy_data); + if (ret_val) + return ret_val; + /* Set auto Master/Slave resolution process */ + ret_val = + e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_data); + if (ret_val) + return ret_val; + phy_data &= ~CR_1000T_MS_ENABLE; + ret_val = + e1000_write_phy_reg(hw, PHY_1000T_CTRL, phy_data); + if (ret_val) + return ret_val; + } + + ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_data); + if (ret_val) + return ret_val; + + /* load defaults for future use */ + hw->original_master_slave = (phy_data & CR_1000T_MS_ENABLE) ? + ((phy_data & CR_1000T_MS_VALUE) ? + e1000_ms_force_master : + e1000_ms_force_slave) : e1000_ms_auto; + + switch (phy_ms_setting) { + case e1000_ms_force_master: + phy_data |= (CR_1000T_MS_ENABLE | CR_1000T_MS_VALUE); + break; + case e1000_ms_force_slave: + phy_data |= CR_1000T_MS_ENABLE; + phy_data &= ~(CR_1000T_MS_VALUE); + break; + case e1000_ms_auto: + phy_data &= ~CR_1000T_MS_ENABLE; + default: + break; + } + ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, phy_data); + if (ret_val) + return ret_val; + } + + return E1000_SUCCESS; } -/******************************************************************** -* Copper link setup for e1000_phy_m88 series. -* -* hw - Struct containing variables accessed by shared code -*********************************************************************/ +/** + * e1000_copper_link_mgp_setup - Copper link setup for e1000_phy_m88 series. + * @hw: Struct containing variables accessed by shared code + */ static s32 e1000_copper_link_mgp_setup(struct e1000_hw *hw) { - s32 ret_val; - u16 phy_data; - - DEBUGFUNC("e1000_copper_link_mgp_setup"); - - if (hw->phy_reset_disable) - return E1000_SUCCESS; - - /* Enable CRS on TX. This must be set for half-duplex operation. */ - ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); - if (ret_val) - return ret_val; - - phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX; - - /* Options: - * MDI/MDI-X = 0 (default) - * 0 - Auto for all speeds - * 1 - MDI mode - * 2 - MDI-X mode - * 3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes) - */ - phy_data &= ~M88E1000_PSCR_AUTO_X_MODE; - - switch (hw->mdix) { - case 1: - phy_data |= M88E1000_PSCR_MDI_MANUAL_MODE; - break; - case 2: - phy_data |= M88E1000_PSCR_MDIX_MANUAL_MODE; - break; - case 3: - phy_data |= M88E1000_PSCR_AUTO_X_1000T; - break; - case 0: - default: - phy_data |= M88E1000_PSCR_AUTO_X_MODE; - break; - } - - /* Options: - * disable_polarity_correction = 0 (default) - * Automatic Correction for Reversed Cable Polarity - * 0 - Disabled - * 1 - Enabled - */ - phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL; - if (hw->disable_polarity_correction == 1) - phy_data |= M88E1000_PSCR_POLARITY_REVERSAL; - ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data); - if (ret_val) - return ret_val; - - if (hw->phy_revision < M88E1011_I_REV_4) { - /* Force TX_CLK in the Extended PHY Specific Control Register - * to 25MHz clock. - */ - ret_val = e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data); - if (ret_val) - return ret_val; - - phy_data |= M88E1000_EPSCR_TX_CLK_25; - - if ((hw->phy_revision == E1000_REVISION_2) && - (hw->phy_id == M88E1111_I_PHY_ID)) { - /* Vidalia Phy, set the downshift counter to 5x */ - phy_data &= ~(M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK); - phy_data |= M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X; - ret_val = e1000_write_phy_reg(hw, - M88E1000_EXT_PHY_SPEC_CTRL, phy_data); - if (ret_val) - return ret_val; - } else { - /* Configure Master and Slave downshift values */ - phy_data &= ~(M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK | - M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK); - phy_data |= (M88E1000_EPSCR_MASTER_DOWNSHIFT_1X | - M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X); - ret_val = e1000_write_phy_reg(hw, - M88E1000_EXT_PHY_SPEC_CTRL, phy_data); - if (ret_val) - return ret_val; - } - } - - /* SW Reset the PHY so all changes take effect */ - ret_val = e1000_phy_reset(hw); - if (ret_val) { - DEBUGOUT("Error Resetting the PHY\n"); - return ret_val; - } - - return E1000_SUCCESS; + s32 ret_val; + u16 phy_data; + + DEBUGFUNC("e1000_copper_link_mgp_setup"); + + if (hw->phy_reset_disable) + return E1000_SUCCESS; + + /* Enable CRS on TX. This must be set for half-duplex operation. */ + ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); + if (ret_val) + return ret_val; + + phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX; + + /* Options: + * MDI/MDI-X = 0 (default) + * 0 - Auto for all speeds + * 1 - MDI mode + * 2 - MDI-X mode + * 3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes) + */ + phy_data &= ~M88E1000_PSCR_AUTO_X_MODE; + + switch (hw->mdix) { + case 1: + phy_data |= M88E1000_PSCR_MDI_MANUAL_MODE; + break; + case 2: + phy_data |= M88E1000_PSCR_MDIX_MANUAL_MODE; + break; + case 3: + phy_data |= M88E1000_PSCR_AUTO_X_1000T; + break; + case 0: + default: + phy_data |= M88E1000_PSCR_AUTO_X_MODE; + break; + } + + /* Options: + * disable_polarity_correction = 0 (default) + * Automatic Correction for Reversed Cable Polarity + * 0 - Disabled + * 1 - Enabled + */ + phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL; + if (hw->disable_polarity_correction == 1) + phy_data |= M88E1000_PSCR_POLARITY_REVERSAL; + ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data); + if (ret_val) + return ret_val; + + if (hw->phy_revision < M88E1011_I_REV_4) { + /* Force TX_CLK in the Extended PHY Specific Control Register + * to 25MHz clock. + */ + ret_val = + e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, + &phy_data); + if (ret_val) + return ret_val; + + phy_data |= M88E1000_EPSCR_TX_CLK_25; + + if ((hw->phy_revision == E1000_REVISION_2) && + (hw->phy_id == M88E1111_I_PHY_ID)) { + /* Vidalia Phy, set the downshift counter to 5x */ + phy_data &= ~(M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK); + phy_data |= M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X; + ret_val = e1000_write_phy_reg(hw, + M88E1000_EXT_PHY_SPEC_CTRL, + phy_data); + if (ret_val) + return ret_val; + } else { + /* Configure Master and Slave downshift values */ + phy_data &= ~(M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK | + M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK); + phy_data |= (M88E1000_EPSCR_MASTER_DOWNSHIFT_1X | + M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X); + ret_val = e1000_write_phy_reg(hw, + M88E1000_EXT_PHY_SPEC_CTRL, + phy_data); + if (ret_val) + return ret_val; + } + } + + /* SW Reset the PHY so all changes take effect */ + ret_val = e1000_phy_reset(hw); + if (ret_val) { + DEBUGOUT("Error Resetting the PHY\n"); + return ret_val; + } + + return E1000_SUCCESS; } -/******************************************************************** -* Setup auto-negotiation and flow control advertisements, -* and then perform auto-negotiation. -* -* hw - Struct containing variables accessed by shared code -*********************************************************************/ +/** + * e1000_copper_link_autoneg - setup auto-neg + * @hw: Struct containing variables accessed by shared code + * + * Setup auto-negotiation and flow control advertisements, + * and then perform auto-negotiation. + */ static s32 e1000_copper_link_autoneg(struct e1000_hw *hw) { - s32 ret_val; - u16 phy_data; - - DEBUGFUNC("e1000_copper_link_autoneg"); - - /* Perform some bounds checking on the hw->autoneg_advertised - * parameter. If this variable is zero, then set it to the default. - */ - hw->autoneg_advertised &= AUTONEG_ADVERTISE_SPEED_DEFAULT; - - /* If autoneg_advertised is zero, we assume it was not defaulted - * by the calling code so we set to advertise full capability. - */ - if (hw->autoneg_advertised == 0) - hw->autoneg_advertised = AUTONEG_ADVERTISE_SPEED_DEFAULT; - - /* IFE phy only supports 10/100 */ - if (hw->phy_type == e1000_phy_ife) - hw->autoneg_advertised &= AUTONEG_ADVERTISE_10_100_ALL; - - DEBUGOUT("Reconfiguring auto-neg advertisement params\n"); - ret_val = e1000_phy_setup_autoneg(hw); - if (ret_val) { - DEBUGOUT("Error Setting up Auto-Negotiation\n"); - return ret_val; - } - DEBUGOUT("Restarting Auto-Neg\n"); - - /* Restart auto-negotiation by setting the Auto Neg Enable bit and - * the Auto Neg Restart bit in the PHY control register. - */ - ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data); - if (ret_val) - return ret_val; - - phy_data |= (MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG); - ret_val = e1000_write_phy_reg(hw, PHY_CTRL, phy_data); - if (ret_val) - return ret_val; - - /* Does the user want to wait for Auto-Neg to complete here, or - * check at a later time (for example, callback routine). - */ - if (hw->wait_autoneg_complete) { - ret_val = e1000_wait_autoneg(hw); - if (ret_val) { - DEBUGOUT("Error while waiting for autoneg to complete\n"); - return ret_val; - } - } - - hw->get_link_status = true; - - return E1000_SUCCESS; + s32 ret_val; + u16 phy_data; + + DEBUGFUNC("e1000_copper_link_autoneg"); + + /* Perform some bounds checking on the hw->autoneg_advertised + * parameter. If this variable is zero, then set it to the default. + */ + hw->autoneg_advertised &= AUTONEG_ADVERTISE_SPEED_DEFAULT; + + /* If autoneg_advertised is zero, we assume it was not defaulted + * by the calling code so we set to advertise full capability. + */ + if (hw->autoneg_advertised == 0) + hw->autoneg_advertised = AUTONEG_ADVERTISE_SPEED_DEFAULT; + + DEBUGOUT("Reconfiguring auto-neg advertisement params\n"); + ret_val = e1000_phy_setup_autoneg(hw); + if (ret_val) { + DEBUGOUT("Error Setting up Auto-Negotiation\n"); + return ret_val; + } + DEBUGOUT("Restarting Auto-Neg\n"); + + /* Restart auto-negotiation by setting the Auto Neg Enable bit and + * the Auto Neg Restart bit in the PHY control register. + */ + ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data); + if (ret_val) + return ret_val; + + phy_data |= (MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG); + ret_val = e1000_write_phy_reg(hw, PHY_CTRL, phy_data); + if (ret_val) + return ret_val; + + /* Does the user want to wait for Auto-Neg to complete here, or + * check at a later time (for example, callback routine). + */ + if (hw->wait_autoneg_complete) { + ret_val = e1000_wait_autoneg(hw); + if (ret_val) { + DEBUGOUT + ("Error while waiting for autoneg to complete\n"); + return ret_val; + } + } + + hw->get_link_status = true; + + return E1000_SUCCESS; } -/****************************************************************************** -* Config the MAC and the PHY after link is up. -* 1) Set up the MAC to the current PHY speed/duplex -* if we are on 82543. If we -* are on newer silicon, we only need to configure -* collision distance in the Transmit Control Register. -* 2) Set up flow control on the MAC to that established with -* the link partner. -* 3) Config DSP to improve Gigabit link quality for some PHY revisions. -* -* hw - Struct containing variables accessed by shared code -******************************************************************************/ +/** + * e1000_copper_link_postconfig - post link setup + * @hw: Struct containing variables accessed by shared code + * + * Config the MAC and the PHY after link is up. + * 1) Set up the MAC to the current PHY speed/duplex + * if we are on 82543. If we + * are on newer silicon, we only need to configure + * collision distance in the Transmit Control Register. + * 2) Set up flow control on the MAC to that established with + * the link partner. + * 3) Config DSP to improve Gigabit link quality for some PHY revisions. + */ static s32 e1000_copper_link_postconfig(struct e1000_hw *hw) { - s32 ret_val; - DEBUGFUNC("e1000_copper_link_postconfig"); - - if (hw->mac_type >= e1000_82544) { - e1000_config_collision_dist(hw); - } else { - ret_val = e1000_config_mac_to_phy(hw); - if (ret_val) { - DEBUGOUT("Error configuring MAC to PHY settings\n"); - return ret_val; - } - } - ret_val = e1000_config_fc_after_link_up(hw); - if (ret_val) { - DEBUGOUT("Error Configuring Flow Control\n"); - return ret_val; - } - - /* Config DSP to improve Giga link quality */ - if (hw->phy_type == e1000_phy_igp) { - ret_val = e1000_config_dsp_after_link_change(hw, true); - if (ret_val) { - DEBUGOUT("Error Configuring DSP after link up\n"); - return ret_val; - } - } - - return E1000_SUCCESS; + s32 ret_val; + DEBUGFUNC("e1000_copper_link_postconfig"); + + if (hw->mac_type >= e1000_82544) { + e1000_config_collision_dist(hw); + } else { + ret_val = e1000_config_mac_to_phy(hw); + if (ret_val) { + DEBUGOUT("Error configuring MAC to PHY settings\n"); + return ret_val; + } + } + ret_val = e1000_config_fc_after_link_up(hw); + if (ret_val) { + DEBUGOUT("Error Configuring Flow Control\n"); + return ret_val; + } + + /* Config DSP to improve Giga link quality */ + if (hw->phy_type == e1000_phy_igp) { + ret_val = e1000_config_dsp_after_link_change(hw, true); + if (ret_val) { + DEBUGOUT("Error Configuring DSP after link up\n"); + return ret_val; + } + } + + return E1000_SUCCESS; } -/****************************************************************************** -* Detects which PHY is present and setup the speed and duplex -* -* hw - Struct containing variables accessed by shared code -******************************************************************************/ +/** + * e1000_setup_copper_link - phy/speed/duplex setting + * @hw: Struct containing variables accessed by shared code + * + * Detects which PHY is present and sets up the speed and duplex + */ static s32 e1000_setup_copper_link(struct e1000_hw *hw) { - s32 ret_val; - u16 i; - u16 phy_data; - u16 reg_data = 0; - - DEBUGFUNC("e1000_setup_copper_link"); - - switch (hw->mac_type) { - case e1000_80003es2lan: - case e1000_ich8lan: - /* Set the mac to wait the maximum time between each - * iteration and increase the max iterations when - * polling the phy; this fixes erroneous timeouts at 10Mbps. */ - ret_val = e1000_write_kmrn_reg(hw, GG82563_REG(0x34, 4), 0xFFFF); - if (ret_val) - return ret_val; - ret_val = e1000_read_kmrn_reg(hw, GG82563_REG(0x34, 9), ®_data); - if (ret_val) - return ret_val; - reg_data |= 0x3F; - ret_val = e1000_write_kmrn_reg(hw, GG82563_REG(0x34, 9), reg_data); - if (ret_val) - return ret_val; - default: - break; - } - - /* Check if it is a valid PHY and set PHY mode if necessary. */ - ret_val = e1000_copper_link_preconfig(hw); - if (ret_val) - return ret_val; - - switch (hw->mac_type) { - case e1000_80003es2lan: - /* Kumeran registers are written-only */ - reg_data = E1000_KUMCTRLSTA_INB_CTRL_LINK_STATUS_TX_TIMEOUT_DEFAULT; - reg_data |= E1000_KUMCTRLSTA_INB_CTRL_DIS_PADDING; - ret_val = e1000_write_kmrn_reg(hw, E1000_KUMCTRLSTA_OFFSET_INB_CTRL, - reg_data); - if (ret_val) - return ret_val; - break; - default: - break; - } - - if (hw->phy_type == e1000_phy_igp || - hw->phy_type == e1000_phy_igp_3 || - hw->phy_type == e1000_phy_igp_2) { - ret_val = e1000_copper_link_igp_setup(hw); - if (ret_val) - return ret_val; - } else if (hw->phy_type == e1000_phy_m88) { - ret_val = e1000_copper_link_mgp_setup(hw); - if (ret_val) - return ret_val; - } else if (hw->phy_type == e1000_phy_gg82563) { - ret_val = e1000_copper_link_ggp_setup(hw); - if (ret_val) - return ret_val; - } - - if (hw->autoneg) { - /* Setup autoneg and flow control advertisement - * and perform autonegotiation */ - ret_val = e1000_copper_link_autoneg(hw); - if (ret_val) - return ret_val; - } else { - /* PHY will be set to 10H, 10F, 100H,or 100F - * depending on value from forced_speed_duplex. */ - DEBUGOUT("Forcing speed and duplex\n"); - ret_val = e1000_phy_force_speed_duplex(hw); - if (ret_val) { - DEBUGOUT("Error Forcing Speed and Duplex\n"); - return ret_val; - } - } - - /* Check link status. Wait up to 100 microseconds for link to become - * valid. - */ - for (i = 0; i < 10; i++) { - ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data); - if (ret_val) - return ret_val; - ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data); - if (ret_val) - return ret_val; - - if (phy_data & MII_SR_LINK_STATUS) { - /* Config the MAC and PHY after link is up */ - ret_val = e1000_copper_link_postconfig(hw); - if (ret_val) - return ret_val; - - DEBUGOUT("Valid link established!!!\n"); - return E1000_SUCCESS; - } - udelay(10); - } - - DEBUGOUT("Unable to establish link!!!\n"); - return E1000_SUCCESS; + s32 ret_val; + u16 i; + u16 phy_data; + + DEBUGFUNC("e1000_setup_copper_link"); + + /* Check if it is a valid PHY and set PHY mode if necessary. */ + ret_val = e1000_copper_link_preconfig(hw); + if (ret_val) + return ret_val; + + if (hw->phy_type == e1000_phy_igp) { + ret_val = e1000_copper_link_igp_setup(hw); + if (ret_val) + return ret_val; + } else if (hw->phy_type == e1000_phy_m88) { + ret_val = e1000_copper_link_mgp_setup(hw); + if (ret_val) + return ret_val; + } + + if (hw->autoneg) { + /* Setup autoneg and flow control advertisement + * and perform autonegotiation */ + ret_val = e1000_copper_link_autoneg(hw); + if (ret_val) + return ret_val; + } else { + /* PHY will be set to 10H, 10F, 100H,or 100F + * depending on value from forced_speed_duplex. */ + DEBUGOUT("Forcing speed and duplex\n"); + ret_val = e1000_phy_force_speed_duplex(hw); + if (ret_val) { + DEBUGOUT("Error Forcing Speed and Duplex\n"); + return ret_val; + } + } + + /* Check link status. Wait up to 100 microseconds for link to become + * valid. + */ + for (i = 0; i < 10; i++) { + ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data); + if (ret_val) + return ret_val; + ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data); + if (ret_val) + return ret_val; + + if (phy_data & MII_SR_LINK_STATUS) { + /* Config the MAC and PHY after link is up */ + ret_val = e1000_copper_link_postconfig(hw); + if (ret_val) + return ret_val; + + DEBUGOUT("Valid link established!!!\n"); + return E1000_SUCCESS; + } + udelay(10); + } + + DEBUGOUT("Unable to establish link!!!\n"); + return E1000_SUCCESS; } -/****************************************************************************** -* Configure the MAC-to-PHY interface for 10/100Mbps -* -* hw - Struct containing variables accessed by shared code -******************************************************************************/ -static s32 e1000_configure_kmrn_for_10_100(struct e1000_hw *hw, u16 duplex) +/** + * e1000_phy_setup_autoneg - phy settings + * @hw: Struct containing variables accessed by shared code + * + * Configures PHY autoneg and flow control advertisement settings + */ +s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) { - s32 ret_val = E1000_SUCCESS; - u32 tipg; - u16 reg_data; + s32 ret_val; + u16 mii_autoneg_adv_reg; + u16 mii_1000t_ctrl_reg; - DEBUGFUNC("e1000_configure_kmrn_for_10_100"); + DEBUGFUNC("e1000_phy_setup_autoneg"); - reg_data = E1000_KUMCTRLSTA_HD_CTRL_10_100_DEFAULT; - ret_val = e1000_write_kmrn_reg(hw, E1000_KUMCTRLSTA_OFFSET_HD_CTRL, - reg_data); - if (ret_val) - return ret_val; + /* Read the MII Auto-Neg Advertisement Register (Address 4). */ + ret_val = e1000_read_phy_reg(hw, PHY_AUTONEG_ADV, &mii_autoneg_adv_reg); + if (ret_val) + return ret_val; - /* Configure Transmit Inter-Packet Gap */ - tipg = er32(TIPG); - tipg &= ~E1000_TIPG_IPGT_MASK; - tipg |= DEFAULT_80003ES2LAN_TIPG_IPGT_10_100; - ew32(TIPG, tipg); + /* Read the MII 1000Base-T Control Register (Address 9). */ + ret_val = + e1000_read_phy_reg(hw, PHY_1000T_CTRL, &mii_1000t_ctrl_reg); + if (ret_val) + return ret_val; - ret_val = e1000_read_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL, ®_data); + /* Need to parse both autoneg_advertised and fc and set up + * the appropriate PHY registers. First we will parse for + * autoneg_advertised software override. Since we can advertise + * a plethora of combinations, we need to check each bit + * individually. + */ - if (ret_val) - return ret_val; + /* First we clear all the 10/100 mb speed bits in the Auto-Neg + * Advertisement Register (Address 4) and the 1000 mb speed bits in + * the 1000Base-T Control Register (Address 9). + */ + mii_autoneg_adv_reg &= ~REG4_SPEED_MASK; + mii_1000t_ctrl_reg &= ~REG9_SPEED_MASK; - if (duplex == HALF_DUPLEX) - reg_data |= GG82563_KMCR_PASS_FALSE_CARRIER; - else - reg_data &= ~GG82563_KMCR_PASS_FALSE_CARRIER; + DEBUGOUT1("autoneg_advertised %x\n", hw->autoneg_advertised); - ret_val = e1000_write_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL, reg_data); + /* Do we want to advertise 10 Mb Half Duplex? */ + if (hw->autoneg_advertised & ADVERTISE_10_HALF) { + DEBUGOUT("Advertise 10mb Half duplex\n"); + mii_autoneg_adv_reg |= NWAY_AR_10T_HD_CAPS; + } - return ret_val; -} + /* Do we want to advertise 10 Mb Full Duplex? */ + if (hw->autoneg_advertised & ADVERTISE_10_FULL) { + DEBUGOUT("Advertise 10mb Full duplex\n"); + mii_autoneg_adv_reg |= NWAY_AR_10T_FD_CAPS; + } -static s32 e1000_configure_kmrn_for_1000(struct e1000_hw *hw) -{ - s32 ret_val = E1000_SUCCESS; - u16 reg_data; - u32 tipg; + /* Do we want to advertise 100 Mb Half Duplex? */ + if (hw->autoneg_advertised & ADVERTISE_100_HALF) { + DEBUGOUT("Advertise 100mb Half duplex\n"); + mii_autoneg_adv_reg |= NWAY_AR_100TX_HD_CAPS; + } - DEBUGFUNC("e1000_configure_kmrn_for_1000"); + /* Do we want to advertise 100 Mb Full Duplex? */ + if (hw->autoneg_advertised & ADVERTISE_100_FULL) { + DEBUGOUT("Advertise 100mb Full duplex\n"); + mii_autoneg_adv_reg |= NWAY_AR_100TX_FD_CAPS; + } - reg_data = E1000_KUMCTRLSTA_HD_CTRL_1000_DEFAULT; - ret_val = e1000_write_kmrn_reg(hw, E1000_KUMCTRLSTA_OFFSET_HD_CTRL, - reg_data); - if (ret_val) - return ret_val; + /* We do not allow the Phy to advertise 1000 Mb Half Duplex */ + if (hw->autoneg_advertised & ADVERTISE_1000_HALF) { + DEBUGOUT + ("Advertise 1000mb Half duplex requested, request denied!\n"); + } - /* Configure Transmit Inter-Packet Gap */ - tipg = er32(TIPG); - tipg &= ~E1000_TIPG_IPGT_MASK; - tipg |= DEFAULT_80003ES2LAN_TIPG_IPGT_1000; - ew32(TIPG, tipg); + /* Do we want to advertise 1000 Mb Full Duplex? */ + if (hw->autoneg_advertised & ADVERTISE_1000_FULL) { + DEBUGOUT("Advertise 1000mb Full duplex\n"); + mii_1000t_ctrl_reg |= CR_1000T_FD_CAPS; + } - ret_val = e1000_read_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL, ®_data); + /* Check for a software override of the flow control settings, and + * setup the PHY advertisement registers accordingly. If + * auto-negotiation is enabled, then software will have to set the + * "PAUSE" bits to the correct value in the Auto-Negotiation + * Advertisement Register (PHY_AUTONEG_ADV) and re-start auto-negotiation. + * + * The possible values of the "fc" parameter are: + * 0: Flow control is completely disabled + * 1: Rx flow control is enabled (we can receive pause frames + * but not send pause frames). + * 2: Tx flow control is enabled (we can send pause frames + * but we do not support receiving pause frames). + * 3: Both Rx and TX flow control (symmetric) are enabled. + * other: No software override. The flow control configuration + * in the EEPROM is used. + */ + switch (hw->fc) { + case E1000_FC_NONE: /* 0 */ + /* Flow control (RX & TX) is completely disabled by a + * software over-ride. + */ + mii_autoneg_adv_reg &= ~(NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); + break; + case E1000_FC_RX_PAUSE: /* 1 */ + /* RX Flow control is enabled, and TX Flow control is + * disabled, by a software over-ride. + */ + /* Since there really isn't a way to advertise that we are + * capable of RX Pause ONLY, we will advertise that we + * support both symmetric and asymmetric RX PAUSE. Later + * (in e1000_config_fc_after_link_up) we will disable the + *hw's ability to send PAUSE frames. + */ + mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); + break; + case E1000_FC_TX_PAUSE: /* 2 */ + /* TX Flow control is enabled, and RX Flow control is + * disabled, by a software over-ride. + */ + mii_autoneg_adv_reg |= NWAY_AR_ASM_DIR; + mii_autoneg_adv_reg &= ~NWAY_AR_PAUSE; + break; + case E1000_FC_FULL: /* 3 */ + /* Flow control (both RX and TX) is enabled by a software + * over-ride. + */ + mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); + break; + default: + DEBUGOUT("Flow control param set incorrectly\n"); + return -E1000_ERR_CONFIG; + } - if (ret_val) - return ret_val; + ret_val = e1000_write_phy_reg(hw, PHY_AUTONEG_ADV, mii_autoneg_adv_reg); + if (ret_val) + return ret_val; - reg_data &= ~GG82563_KMCR_PASS_FALSE_CARRIER; - ret_val = e1000_write_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL, reg_data); + DEBUGOUT1("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg); - return ret_val; -} + ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg); + if (ret_val) + return ret_val; -/****************************************************************************** -* Configures PHY autoneg and flow control advertisement settings -* -* hw - Struct containing variables accessed by shared code -******************************************************************************/ -s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) -{ - s32 ret_val; - u16 mii_autoneg_adv_reg; - u16 mii_1000t_ctrl_reg; - - DEBUGFUNC("e1000_phy_setup_autoneg"); - - /* Read the MII Auto-Neg Advertisement Register (Address 4). */ - ret_val = e1000_read_phy_reg(hw, PHY_AUTONEG_ADV, &mii_autoneg_adv_reg); - if (ret_val) - return ret_val; - - if (hw->phy_type != e1000_phy_ife) { - /* Read the MII 1000Base-T Control Register (Address 9). */ - ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &mii_1000t_ctrl_reg); - if (ret_val) - return ret_val; - } else - mii_1000t_ctrl_reg=0; - - /* Need to parse both autoneg_advertised and fc and set up - * the appropriate PHY registers. First we will parse for - * autoneg_advertised software override. Since we can advertise - * a plethora of combinations, we need to check each bit - * individually. - */ - - /* First we clear all the 10/100 mb speed bits in the Auto-Neg - * Advertisement Register (Address 4) and the 1000 mb speed bits in - * the 1000Base-T Control Register (Address 9). - */ - mii_autoneg_adv_reg &= ~REG4_SPEED_MASK; - mii_1000t_ctrl_reg &= ~REG9_SPEED_MASK; - - DEBUGOUT1("autoneg_advertised %x\n", hw->autoneg_advertised); - - /* Do we want to advertise 10 Mb Half Duplex? */ - if (hw->autoneg_advertised & ADVERTISE_10_HALF) { - DEBUGOUT("Advertise 10mb Half duplex\n"); - mii_autoneg_adv_reg |= NWAY_AR_10T_HD_CAPS; - } - - /* Do we want to advertise 10 Mb Full Duplex? */ - if (hw->autoneg_advertised & ADVERTISE_10_FULL) { - DEBUGOUT("Advertise 10mb Full duplex\n"); - mii_autoneg_adv_reg |= NWAY_AR_10T_FD_CAPS; - } - - /* Do we want to advertise 100 Mb Half Duplex? */ - if (hw->autoneg_advertised & ADVERTISE_100_HALF) { - DEBUGOUT("Advertise 100mb Half duplex\n"); - mii_autoneg_adv_reg |= NWAY_AR_100TX_HD_CAPS; - } - - /* Do we want to advertise 100 Mb Full Duplex? */ - if (hw->autoneg_advertised & ADVERTISE_100_FULL) { - DEBUGOUT("Advertise 100mb Full duplex\n"); - mii_autoneg_adv_reg |= NWAY_AR_100TX_FD_CAPS; - } - - /* We do not allow the Phy to advertise 1000 Mb Half Duplex */ - if (hw->autoneg_advertised & ADVERTISE_1000_HALF) { - DEBUGOUT("Advertise 1000mb Half duplex requested, request denied!\n"); - } - - /* Do we want to advertise 1000 Mb Full Duplex? */ - if (hw->autoneg_advertised & ADVERTISE_1000_FULL) { - DEBUGOUT("Advertise 1000mb Full duplex\n"); - mii_1000t_ctrl_reg |= CR_1000T_FD_CAPS; - if (hw->phy_type == e1000_phy_ife) { - DEBUGOUT("e1000_phy_ife is a 10/100 PHY. Gigabit speed is not supported.\n"); - } - } - - /* Check for a software override of the flow control settings, and - * setup the PHY advertisement registers accordingly. If - * auto-negotiation is enabled, then software will have to set the - * "PAUSE" bits to the correct value in the Auto-Negotiation - * Advertisement Register (PHY_AUTONEG_ADV) and re-start auto-negotiation. - * - * The possible values of the "fc" parameter are: - * 0: Flow control is completely disabled - * 1: Rx flow control is enabled (we can receive pause frames - * but not send pause frames). - * 2: Tx flow control is enabled (we can send pause frames - * but we do not support receiving pause frames). - * 3: Both Rx and TX flow control (symmetric) are enabled. - * other: No software override. The flow control configuration - * in the EEPROM is used. - */ - switch (hw->fc) { - case E1000_FC_NONE: /* 0 */ - /* Flow control (RX & TX) is completely disabled by a - * software over-ride. - */ - mii_autoneg_adv_reg &= ~(NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); - break; - case E1000_FC_RX_PAUSE: /* 1 */ - /* RX Flow control is enabled, and TX Flow control is - * disabled, by a software over-ride. - */ - /* Since there really isn't a way to advertise that we are - * capable of RX Pause ONLY, we will advertise that we - * support both symmetric and asymmetric RX PAUSE. Later - * (in e1000_config_fc_after_link_up) we will disable the - *hw's ability to send PAUSE frames. - */ - mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); - break; - case E1000_FC_TX_PAUSE: /* 2 */ - /* TX Flow control is enabled, and RX Flow control is - * disabled, by a software over-ride. - */ - mii_autoneg_adv_reg |= NWAY_AR_ASM_DIR; - mii_autoneg_adv_reg &= ~NWAY_AR_PAUSE; - break; - case E1000_FC_FULL: /* 3 */ - /* Flow control (both RX and TX) is enabled by a software - * over-ride. - */ - mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); - break; - default: - DEBUGOUT("Flow control param set incorrectly\n"); - return -E1000_ERR_CONFIG; - } - - ret_val = e1000_write_phy_reg(hw, PHY_AUTONEG_ADV, mii_autoneg_adv_reg); - if (ret_val) - return ret_val; - - DEBUGOUT1("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg); - - if (hw->phy_type != e1000_phy_ife) { - ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg); - if (ret_val) - return ret_val; - } - - return E1000_SUCCESS; + return E1000_SUCCESS; } -/****************************************************************************** -* Force PHY speed and duplex settings to hw->forced_speed_duplex -* -* hw - Struct containing variables accessed by shared code -******************************************************************************/ +/** + * e1000_phy_force_speed_duplex - force link settings + * @hw: Struct containing variables accessed by shared code + * + * Force PHY speed and duplex settings to hw->forced_speed_duplex + */ static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw) { - u32 ctrl; - s32 ret_val; - u16 mii_ctrl_reg; - u16 mii_status_reg; - u16 phy_data; - u16 i; - - DEBUGFUNC("e1000_phy_force_speed_duplex"); - - /* Turn off Flow control if we are forcing speed and duplex. */ - hw->fc = E1000_FC_NONE; - - DEBUGOUT1("hw->fc = %d\n", hw->fc); - - /* Read the Device Control Register. */ - ctrl = er32(CTRL); - - /* Set the bits to Force Speed and Duplex in the Device Ctrl Reg. */ - ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX); - ctrl &= ~(DEVICE_SPEED_MASK); - - /* Clear the Auto Speed Detect Enable bit. */ - ctrl &= ~E1000_CTRL_ASDE; - - /* Read the MII Control Register. */ - ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &mii_ctrl_reg); - if (ret_val) - return ret_val; - - /* We need to disable autoneg in order to force link and duplex. */ - - mii_ctrl_reg &= ~MII_CR_AUTO_NEG_EN; - - /* Are we forcing Full or Half Duplex? */ - if (hw->forced_speed_duplex == e1000_100_full || - hw->forced_speed_duplex == e1000_10_full) { - /* We want to force full duplex so we SET the full duplex bits in the - * Device and MII Control Registers. - */ - ctrl |= E1000_CTRL_FD; - mii_ctrl_reg |= MII_CR_FULL_DUPLEX; - DEBUGOUT("Full Duplex\n"); - } else { - /* We want to force half duplex so we CLEAR the full duplex bits in - * the Device and MII Control Registers. - */ - ctrl &= ~E1000_CTRL_FD; - mii_ctrl_reg &= ~MII_CR_FULL_DUPLEX; - DEBUGOUT("Half Duplex\n"); - } - - /* Are we forcing 100Mbps??? */ - if (hw->forced_speed_duplex == e1000_100_full || - hw->forced_speed_duplex == e1000_100_half) { - /* Set the 100Mb bit and turn off the 1000Mb and 10Mb bits. */ - ctrl |= E1000_CTRL_SPD_100; - mii_ctrl_reg |= MII_CR_SPEED_100; - mii_ctrl_reg &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_10); - DEBUGOUT("Forcing 100mb "); - } else { - /* Set the 10Mb bit and turn off the 1000Mb and 100Mb bits. */ - ctrl &= ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100); - mii_ctrl_reg |= MII_CR_SPEED_10; - mii_ctrl_reg &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_100); - DEBUGOUT("Forcing 10mb "); - } - - e1000_config_collision_dist(hw); - - /* Write the configured values back to the Device Control Reg. */ - ew32(CTRL, ctrl); - - if ((hw->phy_type == e1000_phy_m88) || - (hw->phy_type == e1000_phy_gg82563)) { - ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); - if (ret_val) - return ret_val; - - /* Clear Auto-Crossover to force MDI manually. M88E1000 requires MDI - * forced whenever speed are duplex are forced. - */ - phy_data &= ~M88E1000_PSCR_AUTO_X_MODE; - ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data); - if (ret_val) - return ret_val; - - DEBUGOUT1("M88E1000 PSCR: %x \n", phy_data); - - /* Need to reset the PHY or these changes will be ignored */ - mii_ctrl_reg |= MII_CR_RESET; - - /* Disable MDI-X support for 10/100 */ - } else if (hw->phy_type == e1000_phy_ife) { - ret_val = e1000_read_phy_reg(hw, IFE_PHY_MDIX_CONTROL, &phy_data); - if (ret_val) - return ret_val; - - phy_data &= ~IFE_PMC_AUTO_MDIX; - phy_data &= ~IFE_PMC_FORCE_MDIX; - - ret_val = e1000_write_phy_reg(hw, IFE_PHY_MDIX_CONTROL, phy_data); - if (ret_val) - return ret_val; - - } else { - /* Clear Auto-Crossover to force MDI manually. IGP requires MDI - * forced whenever speed or duplex are forced. - */ - ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, &phy_data); - if (ret_val) - return ret_val; - - phy_data &= ~IGP01E1000_PSCR_AUTO_MDIX; - phy_data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX; - - ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, phy_data); - if (ret_val) - return ret_val; - } - - /* Write back the modified PHY MII control register. */ - ret_val = e1000_write_phy_reg(hw, PHY_CTRL, mii_ctrl_reg); - if (ret_val) - return ret_val; - - udelay(1); - - /* The wait_autoneg_complete flag may be a little misleading here. - * Since we are forcing speed and duplex, Auto-Neg is not enabled. - * But we do want to delay for a period while forcing only so we - * don't generate false No Link messages. So we will wait here - * only if the user has set wait_autoneg_complete to 1, which is - * the default. - */ - if (hw->wait_autoneg_complete) { - /* We will wait for autoneg to complete. */ - DEBUGOUT("Waiting for forced speed/duplex link.\n"); - mii_status_reg = 0; - - /* We will wait for autoneg to complete or 4.5 seconds to expire. */ - for (i = PHY_FORCE_TIME; i > 0; i--) { - /* Read the MII Status Register and wait for Auto-Neg Complete bit - * to be set. - */ - ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg); - if (ret_val) - return ret_val; - - ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg); - if (ret_val) - return ret_val; - - if (mii_status_reg & MII_SR_LINK_STATUS) break; - msleep(100); - } - if ((i == 0) && - ((hw->phy_type == e1000_phy_m88) || - (hw->phy_type == e1000_phy_gg82563))) { - /* We didn't get link. Reset the DSP and wait again for link. */ - ret_val = e1000_phy_reset_dsp(hw); - if (ret_val) { - DEBUGOUT("Error Resetting PHY DSP\n"); - return ret_val; - } - } - /* This loop will early-out if the link condition has been met. */ - for (i = PHY_FORCE_TIME; i > 0; i--) { - if (mii_status_reg & MII_SR_LINK_STATUS) break; - msleep(100); - /* Read the MII Status Register and wait for Auto-Neg Complete bit - * to be set. - */ - ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg); - if (ret_val) - return ret_val; - - ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg); - if (ret_val) - return ret_val; - } - } - - if (hw->phy_type == e1000_phy_m88) { - /* Because we reset the PHY above, we need to re-force TX_CLK in the - * Extended PHY Specific Control Register to 25MHz clock. This value - * defaults back to a 2.5MHz clock when the PHY is reset. - */ - ret_val = e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data); - if (ret_val) - return ret_val; - - phy_data |= M88E1000_EPSCR_TX_CLK_25; - ret_val = e1000_write_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, phy_data); - if (ret_val) - return ret_val; - - /* In addition, because of the s/w reset above, we need to enable CRS on - * TX. This must be set for both full and half duplex operation. - */ - ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); - if (ret_val) - return ret_val; - - phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX; - ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data); - if (ret_val) - return ret_val; - - if ((hw->mac_type == e1000_82544 || hw->mac_type == e1000_82543) && - (!hw->autoneg) && (hw->forced_speed_duplex == e1000_10_full || - hw->forced_speed_duplex == e1000_10_half)) { - ret_val = e1000_polarity_reversal_workaround(hw); - if (ret_val) - return ret_val; - } - } else if (hw->phy_type == e1000_phy_gg82563) { - /* The TX_CLK of the Extended PHY Specific Control Register defaults - * to 2.5MHz on a reset. We need to re-force it back to 25MHz, if - * we're not in a forced 10/duplex configuration. */ - ret_val = e1000_read_phy_reg(hw, GG82563_PHY_MAC_SPEC_CTRL, &phy_data); - if (ret_val) - return ret_val; - - phy_data &= ~GG82563_MSCR_TX_CLK_MASK; - if ((hw->forced_speed_duplex == e1000_10_full) || - (hw->forced_speed_duplex == e1000_10_half)) - phy_data |= GG82563_MSCR_TX_CLK_10MBPS_2_5MHZ; - else - phy_data |= GG82563_MSCR_TX_CLK_100MBPS_25MHZ; - - /* Also due to the reset, we need to enable CRS on Tx. */ - phy_data |= GG82563_MSCR_ASSERT_CRS_ON_TX; - - ret_val = e1000_write_phy_reg(hw, GG82563_PHY_MAC_SPEC_CTRL, phy_data); - if (ret_val) - return ret_val; - } - return E1000_SUCCESS; + u32 ctrl; + s32 ret_val; + u16 mii_ctrl_reg; + u16 mii_status_reg; + u16 phy_data; + u16 i; + + DEBUGFUNC("e1000_phy_force_speed_duplex"); + + /* Turn off Flow control if we are forcing speed and duplex. */ + hw->fc = E1000_FC_NONE; + + DEBUGOUT1("hw->fc = %d\n", hw->fc); + + /* Read the Device Control Register. */ + ctrl = er32(CTRL); + + /* Set the bits to Force Speed and Duplex in the Device Ctrl Reg. */ + ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX); + ctrl &= ~(DEVICE_SPEED_MASK); + + /* Clear the Auto Speed Detect Enable bit. */ + ctrl &= ~E1000_CTRL_ASDE; + + /* Read the MII Control Register. */ + ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &mii_ctrl_reg); + if (ret_val) + return ret_val; + + /* We need to disable autoneg in order to force link and duplex. */ + + mii_ctrl_reg &= ~MII_CR_AUTO_NEG_EN; + + /* Are we forcing Full or Half Duplex? */ + if (hw->forced_speed_duplex == e1000_100_full || + hw->forced_speed_duplex == e1000_10_full) { + /* We want to force full duplex so we SET the full duplex bits in the + * Device and MII Control Registers. + */ + ctrl |= E1000_CTRL_FD; + mii_ctrl_reg |= MII_CR_FULL_DUPLEX; + DEBUGOUT("Full Duplex\n"); + } else { + /* We want to force half duplex so we CLEAR the full duplex bits in + * the Device and MII Control Registers. + */ + ctrl &= ~E1000_CTRL_FD; + mii_ctrl_reg &= ~MII_CR_FULL_DUPLEX; + DEBUGOUT("Half Duplex\n"); + } + + /* Are we forcing 100Mbps??? */ + if (hw->forced_speed_duplex == e1000_100_full || + hw->forced_speed_duplex == e1000_100_half) { + /* Set the 100Mb bit and turn off the 1000Mb and 10Mb bits. */ + ctrl |= E1000_CTRL_SPD_100; + mii_ctrl_reg |= MII_CR_SPEED_100; + mii_ctrl_reg &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_10); + DEBUGOUT("Forcing 100mb "); + } else { + /* Set the 10Mb bit and turn off the 1000Mb and 100Mb bits. */ + ctrl &= ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100); + mii_ctrl_reg |= MII_CR_SPEED_10; + mii_ctrl_reg &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_100); + DEBUGOUT("Forcing 10mb "); + } + + e1000_config_collision_dist(hw); + + /* Write the configured values back to the Device Control Reg. */ + ew32(CTRL, ctrl); + + if (hw->phy_type == e1000_phy_m88) { + ret_val = + e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); + if (ret_val) + return ret_val; + + /* Clear Auto-Crossover to force MDI manually. M88E1000 requires MDI + * forced whenever speed are duplex are forced. + */ + phy_data &= ~M88E1000_PSCR_AUTO_X_MODE; + ret_val = + e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data); + if (ret_val) + return ret_val; + + DEBUGOUT1("M88E1000 PSCR: %x \n", phy_data); + + /* Need to reset the PHY or these changes will be ignored */ + mii_ctrl_reg |= MII_CR_RESET; + + /* Disable MDI-X support for 10/100 */ + } else { + /* Clear Auto-Crossover to force MDI manually. IGP requires MDI + * forced whenever speed or duplex are forced. + */ + ret_val = + e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, &phy_data); + if (ret_val) + return ret_val; + + phy_data &= ~IGP01E1000_PSCR_AUTO_MDIX; + phy_data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX; + + ret_val = + e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, phy_data); + if (ret_val) + return ret_val; + } + + /* Write back the modified PHY MII control register. */ + ret_val = e1000_write_phy_reg(hw, PHY_CTRL, mii_ctrl_reg); + if (ret_val) + return ret_val; + + udelay(1); + + /* The wait_autoneg_complete flag may be a little misleading here. + * Since we are forcing speed and duplex, Auto-Neg is not enabled. + * But we do want to delay for a period while forcing only so we + * don't generate false No Link messages. So we will wait here + * only if the user has set wait_autoneg_complete to 1, which is + * the default. + */ + if (hw->wait_autoneg_complete) { + /* We will wait for autoneg to complete. */ + DEBUGOUT("Waiting for forced speed/duplex link.\n"); + mii_status_reg = 0; + + /* We will wait for autoneg to complete or 4.5 seconds to expire. */ + for (i = PHY_FORCE_TIME; i > 0; i--) { + /* Read the MII Status Register and wait for Auto-Neg Complete bit + * to be set. + */ + ret_val = + e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg); + if (ret_val) + return ret_val; + + ret_val = + e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg); + if (ret_val) + return ret_val; + + if (mii_status_reg & MII_SR_LINK_STATUS) + break; + msleep(100); + } + if ((i == 0) && (hw->phy_type == e1000_phy_m88)) { + /* We didn't get link. Reset the DSP and wait again for link. */ + ret_val = e1000_phy_reset_dsp(hw); + if (ret_val) { + DEBUGOUT("Error Resetting PHY DSP\n"); + return ret_val; + } + } + /* This loop will early-out if the link condition has been met. */ + for (i = PHY_FORCE_TIME; i > 0; i--) { + if (mii_status_reg & MII_SR_LINK_STATUS) + break; + msleep(100); + /* Read the MII Status Register and wait for Auto-Neg Complete bit + * to be set. + */ + ret_val = + e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg); + if (ret_val) + return ret_val; + + ret_val = + e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg); + if (ret_val) + return ret_val; + } + } + + if (hw->phy_type == e1000_phy_m88) { + /* Because we reset the PHY above, we need to re-force TX_CLK in the + * Extended PHY Specific Control Register to 25MHz clock. This value + * defaults back to a 2.5MHz clock when the PHY is reset. + */ + ret_val = + e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, + &phy_data); + if (ret_val) + return ret_val; + + phy_data |= M88E1000_EPSCR_TX_CLK_25; + ret_val = + e1000_write_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, + phy_data); + if (ret_val) + return ret_val; + + /* In addition, because of the s/w reset above, we need to enable CRS on + * TX. This must be set for both full and half duplex operation. + */ + ret_val = + e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); + if (ret_val) + return ret_val; + + phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX; + ret_val = + e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data); + if (ret_val) + return ret_val; + + if ((hw->mac_type == e1000_82544 || hw->mac_type == e1000_82543) + && (!hw->autoneg) + && (hw->forced_speed_duplex == e1000_10_full + || hw->forced_speed_duplex == e1000_10_half)) { + ret_val = e1000_polarity_reversal_workaround(hw); + if (ret_val) + return ret_val; + } + } + return E1000_SUCCESS; } -/****************************************************************************** -* Sets the collision distance in the Transmit Control register -* -* hw - Struct containing variables accessed by shared code -* -* Link should have been established previously. Reads the speed and duplex -* information from the Device Status register. -******************************************************************************/ +/** + * e1000_config_collision_dist - set collision distance register + * @hw: Struct containing variables accessed by shared code + * + * Sets the collision distance in the Transmit Control register. + * Link should have been established previously. Reads the speed and duplex + * information from the Device Status register. + */ void e1000_config_collision_dist(struct e1000_hw *hw) { - u32 tctl, coll_dist; + u32 tctl, coll_dist; - DEBUGFUNC("e1000_config_collision_dist"); + DEBUGFUNC("e1000_config_collision_dist"); - if (hw->mac_type < e1000_82543) - coll_dist = E1000_COLLISION_DISTANCE_82542; - else - coll_dist = E1000_COLLISION_DISTANCE; + if (hw->mac_type < e1000_82543) + coll_dist = E1000_COLLISION_DISTANCE_82542; + else + coll_dist = E1000_COLLISION_DISTANCE; - tctl = er32(TCTL); + tctl = er32(TCTL); - tctl &= ~E1000_TCTL_COLD; - tctl |= coll_dist << E1000_COLD_SHIFT; + tctl &= ~E1000_TCTL_COLD; + tctl |= coll_dist << E1000_COLD_SHIFT; - ew32(TCTL, tctl); - E1000_WRITE_FLUSH(); + ew32(TCTL, tctl); + E1000_WRITE_FLUSH(); } -/****************************************************************************** -* Sets MAC speed and duplex settings to reflect the those in the PHY -* -* hw - Struct containing variables accessed by shared code -* mii_reg - data to write to the MII control register -* -* The contents of the PHY register containing the needed information need to -* be passed in. -******************************************************************************/ +/** + * e1000_config_mac_to_phy - sync phy and mac settings + * @hw: Struct containing variables accessed by shared code + * @mii_reg: data to write to the MII control register + * + * Sets MAC speed and duplex settings to reflect the those in the PHY + * The contents of the PHY register containing the needed information need to + * be passed in. + */ static s32 e1000_config_mac_to_phy(struct e1000_hw *hw) { - u32 ctrl; - s32 ret_val; - u16 phy_data; - - DEBUGFUNC("e1000_config_mac_to_phy"); - - /* 82544 or newer MAC, Auto Speed Detection takes care of - * MAC speed/duplex configuration.*/ - if (hw->mac_type >= e1000_82544) - return E1000_SUCCESS; - - /* Read the Device Control Register and set the bits to Force Speed - * and Duplex. - */ - ctrl = er32(CTRL); - ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX); - ctrl &= ~(E1000_CTRL_SPD_SEL | E1000_CTRL_ILOS); - - /* Set up duplex in the Device Control and Transmit Control - * registers depending on negotiated values. - */ - ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data); - if (ret_val) - return ret_val; - - if (phy_data & M88E1000_PSSR_DPLX) - ctrl |= E1000_CTRL_FD; - else - ctrl &= ~E1000_CTRL_FD; - - e1000_config_collision_dist(hw); - - /* Set up speed in the Device Control register depending on - * negotiated values. - */ - if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS) - ctrl |= E1000_CTRL_SPD_1000; - else if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_100MBS) - ctrl |= E1000_CTRL_SPD_100; - - /* Write the configured values back to the Device Control Reg. */ - ew32(CTRL, ctrl); - return E1000_SUCCESS; + u32 ctrl; + s32 ret_val; + u16 phy_data; + + DEBUGFUNC("e1000_config_mac_to_phy"); + + /* 82544 or newer MAC, Auto Speed Detection takes care of + * MAC speed/duplex configuration.*/ + if (hw->mac_type >= e1000_82544) + return E1000_SUCCESS; + + /* Read the Device Control Register and set the bits to Force Speed + * and Duplex. + */ + ctrl = er32(CTRL); + ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX); + ctrl &= ~(E1000_CTRL_SPD_SEL | E1000_CTRL_ILOS); + + /* Set up duplex in the Device Control and Transmit Control + * registers depending on negotiated values. + */ + ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data); + if (ret_val) + return ret_val; + + if (phy_data & M88E1000_PSSR_DPLX) + ctrl |= E1000_CTRL_FD; + else + ctrl &= ~E1000_CTRL_FD; + + e1000_config_collision_dist(hw); + + /* Set up speed in the Device Control register depending on + * negotiated values. + */ + if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS) + ctrl |= E1000_CTRL_SPD_1000; + else if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_100MBS) + ctrl |= E1000_CTRL_SPD_100; + + /* Write the configured values back to the Device Control Reg. */ + ew32(CTRL, ctrl); + return E1000_SUCCESS; } -/****************************************************************************** - * Forces the MAC's flow control settings. - * - * hw - Struct containing variables accessed by shared code +/** + * e1000_force_mac_fc - force flow control settings + * @hw: Struct containing variables accessed by shared code * + * Forces the MAC's flow control settings. * Sets the TFCE and RFCE bits in the device control register to reflect * the adapter settings. TFCE and RFCE need to be explicitly set by * software when a Copper PHY is used because autonegotiation is managed * by the PHY rather than the MAC. Software must also configure these * bits when link is forced on a fiber connection. - *****************************************************************************/ + */ s32 e1000_force_mac_fc(struct e1000_hw *hw) { - u32 ctrl; - - DEBUGFUNC("e1000_force_mac_fc"); - - /* Get the current configuration of the Device Control Register */ - ctrl = er32(CTRL); - - /* Because we didn't get link via the internal auto-negotiation - * mechanism (we either forced link or we got link via PHY - * auto-neg), we have to manually enable/disable transmit an - * receive flow control. - * - * The "Case" statement below enables/disable flow control - * according to the "hw->fc" parameter. - * - * The possible values of the "fc" parameter are: - * 0: Flow control is completely disabled - * 1: Rx flow control is enabled (we can receive pause - * frames but not send pause frames). - * 2: Tx flow control is enabled (we can send pause frames - * frames but we do not receive pause frames). - * 3: Both Rx and TX flow control (symmetric) is enabled. - * other: No other values should be possible at this point. - */ - - switch (hw->fc) { - case E1000_FC_NONE: - ctrl &= (~(E1000_CTRL_TFCE | E1000_CTRL_RFCE)); - break; - case E1000_FC_RX_PAUSE: - ctrl &= (~E1000_CTRL_TFCE); - ctrl |= E1000_CTRL_RFCE; - break; - case E1000_FC_TX_PAUSE: - ctrl &= (~E1000_CTRL_RFCE); - ctrl |= E1000_CTRL_TFCE; - break; - case E1000_FC_FULL: - ctrl |= (E1000_CTRL_TFCE | E1000_CTRL_RFCE); - break; - default: - DEBUGOUT("Flow control param set incorrectly\n"); - return -E1000_ERR_CONFIG; - } - - /* Disable TX Flow Control for 82542 (rev 2.0) */ - if (hw->mac_type == e1000_82542_rev2_0) - ctrl &= (~E1000_CTRL_TFCE); - - ew32(CTRL, ctrl); - return E1000_SUCCESS; + u32 ctrl; + + DEBUGFUNC("e1000_force_mac_fc"); + + /* Get the current configuration of the Device Control Register */ + ctrl = er32(CTRL); + + /* Because we didn't get link via the internal auto-negotiation + * mechanism (we either forced link or we got link via PHY + * auto-neg), we have to manually enable/disable transmit an + * receive flow control. + * + * The "Case" statement below enables/disable flow control + * according to the "hw->fc" parameter. + * + * The possible values of the "fc" parameter are: + * 0: Flow control is completely disabled + * 1: Rx flow control is enabled (we can receive pause + * frames but not send pause frames). + * 2: Tx flow control is enabled (we can send pause frames + * frames but we do not receive pause frames). + * 3: Both Rx and TX flow control (symmetric) is enabled. + * other: No other values should be possible at this point. + */ + + switch (hw->fc) { + case E1000_FC_NONE: + ctrl &= (~(E1000_CTRL_TFCE | E1000_CTRL_RFCE)); + break; + case E1000_FC_RX_PAUSE: + ctrl &= (~E1000_CTRL_TFCE); + ctrl |= E1000_CTRL_RFCE; + break; + case E1000_FC_TX_PAUSE: + ctrl &= (~E1000_CTRL_RFCE); + ctrl |= E1000_CTRL_TFCE; + break; + case E1000_FC_FULL: + ctrl |= (E1000_CTRL_TFCE | E1000_CTRL_RFCE); + break; + default: + DEBUGOUT("Flow control param set incorrectly\n"); + return -E1000_ERR_CONFIG; + } + + /* Disable TX Flow Control for 82542 (rev 2.0) */ + if (hw->mac_type == e1000_82542_rev2_0) + ctrl &= (~E1000_CTRL_TFCE); + + ew32(CTRL, ctrl); + return E1000_SUCCESS; } -/****************************************************************************** - * Configures flow control settings after link is established - * - * hw - Struct containing variables accessed by shared code +/** + * e1000_config_fc_after_link_up - configure flow control after autoneg + * @hw: Struct containing variables accessed by shared code * + * Configures flow control settings after link is established * Should be called immediately after a valid link has been established. * Forces MAC flow control settings if link was forced. When in MII/GMII mode * and autonegotiation is enabled, the MAC flow control settings will be set * based on the flow control negotiated by the PHY. In TBI mode, the TFCE - * and RFCE bits will be automaticaly set to the negotiated flow control mode. - *****************************************************************************/ + * and RFCE bits will be automatically set to the negotiated flow control mode. + */ static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw) { - s32 ret_val; - u16 mii_status_reg; - u16 mii_nway_adv_reg; - u16 mii_nway_lp_ability_reg; - u16 speed; - u16 duplex; - - DEBUGFUNC("e1000_config_fc_after_link_up"); - - /* Check for the case where we have fiber media and auto-neg failed - * so we had to force link. In this case, we need to force the - * configuration of the MAC to match the "fc" parameter. - */ - if (((hw->media_type == e1000_media_type_fiber) && (hw->autoneg_failed)) || - ((hw->media_type == e1000_media_type_internal_serdes) && - (hw->autoneg_failed)) || - ((hw->media_type == e1000_media_type_copper) && (!hw->autoneg))) { - ret_val = e1000_force_mac_fc(hw); - if (ret_val) { - DEBUGOUT("Error forcing flow control settings\n"); - return ret_val; - } - } - - /* Check for the case where we have copper media and auto-neg is - * enabled. In this case, we need to check and see if Auto-Neg - * has completed, and if so, how the PHY and link partner has - * flow control configured. - */ - if ((hw->media_type == e1000_media_type_copper) && hw->autoneg) { - /* Read the MII Status Register and check to see if AutoNeg - * has completed. We read this twice because this reg has - * some "sticky" (latched) bits. - */ - ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg); - if (ret_val) - return ret_val; - ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg); - if (ret_val) - return ret_val; - - if (mii_status_reg & MII_SR_AUTONEG_COMPLETE) { - /* The AutoNeg process has completed, so we now need to - * read both the Auto Negotiation Advertisement Register - * (Address 4) and the Auto_Negotiation Base Page Ability - * Register (Address 5) to determine how flow control was - * negotiated. - */ - ret_val = e1000_read_phy_reg(hw, PHY_AUTONEG_ADV, - &mii_nway_adv_reg); - if (ret_val) - return ret_val; - ret_val = e1000_read_phy_reg(hw, PHY_LP_ABILITY, - &mii_nway_lp_ability_reg); - if (ret_val) - return ret_val; - - /* Two bits in the Auto Negotiation Advertisement Register - * (Address 4) and two bits in the Auto Negotiation Base - * Page Ability Register (Address 5) determine flow control - * for both the PHY and the link partner. The following - * table, taken out of the IEEE 802.3ab/D6.0 dated March 25, - * 1999, describes these PAUSE resolution bits and how flow - * control is determined based upon these settings. - * NOTE: DC = Don't Care - * - * LOCAL DEVICE | LINK PARTNER - * PAUSE | ASM_DIR | PAUSE | ASM_DIR | NIC Resolution - *-------|---------|-------|---------|-------------------- - * 0 | 0 | DC | DC | E1000_FC_NONE - * 0 | 1 | 0 | DC | E1000_FC_NONE - * 0 | 1 | 1 | 0 | E1000_FC_NONE - * 0 | 1 | 1 | 1 | E1000_FC_TX_PAUSE - * 1 | 0 | 0 | DC | E1000_FC_NONE - * 1 | DC | 1 | DC | E1000_FC_FULL - * 1 | 1 | 0 | 0 | E1000_FC_NONE - * 1 | 1 | 0 | 1 | E1000_FC_RX_PAUSE - * - */ - /* Are both PAUSE bits set to 1? If so, this implies - * Symmetric Flow Control is enabled at both ends. The - * ASM_DIR bits are irrelevant per the spec. - * - * For Symmetric Flow Control: - * - * LOCAL DEVICE | LINK PARTNER - * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result - *-------|---------|-------|---------|-------------------- - * 1 | DC | 1 | DC | E1000_FC_FULL - * - */ - if ((mii_nway_adv_reg & NWAY_AR_PAUSE) && - (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE)) { - /* Now we need to check if the user selected RX ONLY - * of pause frames. In this case, we had to advertise - * FULL flow control because we could not advertise RX - * ONLY. Hence, we must now check to see if we need to - * turn OFF the TRANSMISSION of PAUSE frames. - */ - if (hw->original_fc == E1000_FC_FULL) { - hw->fc = E1000_FC_FULL; - DEBUGOUT("Flow Control = FULL.\n"); - } else { - hw->fc = E1000_FC_RX_PAUSE; - DEBUGOUT("Flow Control = RX PAUSE frames only.\n"); - } - } - /* For receiving PAUSE frames ONLY. - * - * LOCAL DEVICE | LINK PARTNER - * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result - *-------|---------|-------|---------|-------------------- - * 0 | 1 | 1 | 1 | E1000_FC_TX_PAUSE - * - */ - else if (!(mii_nway_adv_reg & NWAY_AR_PAUSE) && - (mii_nway_adv_reg & NWAY_AR_ASM_DIR) && - (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && - (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { - hw->fc = E1000_FC_TX_PAUSE; - DEBUGOUT("Flow Control = TX PAUSE frames only.\n"); - } - /* For transmitting PAUSE frames ONLY. - * - * LOCAL DEVICE | LINK PARTNER - * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result - *-------|---------|-------|---------|-------------------- - * 1 | 1 | 0 | 1 | E1000_FC_RX_PAUSE - * - */ - else if ((mii_nway_adv_reg & NWAY_AR_PAUSE) && - (mii_nway_adv_reg & NWAY_AR_ASM_DIR) && - !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && - (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { - hw->fc = E1000_FC_RX_PAUSE; - DEBUGOUT("Flow Control = RX PAUSE frames only.\n"); - } - /* Per the IEEE spec, at this point flow control should be - * disabled. However, we want to consider that we could - * be connected to a legacy switch that doesn't advertise - * desired flow control, but can be forced on the link - * partner. So if we advertised no flow control, that is - * what we will resolve to. If we advertised some kind of - * receive capability (Rx Pause Only or Full Flow Control) - * and the link partner advertised none, we will configure - * ourselves to enable Rx Flow Control only. We can do - * this safely for two reasons: If the link partner really - * didn't want flow control enabled, and we enable Rx, no - * harm done since we won't be receiving any PAUSE frames - * anyway. If the intent on the link partner was to have - * flow control enabled, then by us enabling RX only, we - * can at least receive pause frames and process them. - * This is a good idea because in most cases, since we are - * predominantly a server NIC, more times than not we will - * be asked to delay transmission of packets than asking - * our link partner to pause transmission of frames. - */ - else if ((hw->original_fc == E1000_FC_NONE || - hw->original_fc == E1000_FC_TX_PAUSE) || - hw->fc_strict_ieee) { - hw->fc = E1000_FC_NONE; - DEBUGOUT("Flow Control = NONE.\n"); - } else { - hw->fc = E1000_FC_RX_PAUSE; - DEBUGOUT("Flow Control = RX PAUSE frames only.\n"); - } - - /* Now we need to do one last check... If we auto- - * negotiated to HALF DUPLEX, flow control should not be - * enabled per IEEE 802.3 spec. - */ - ret_val = e1000_get_speed_and_duplex(hw, &speed, &duplex); - if (ret_val) { - DEBUGOUT("Error getting link speed and duplex\n"); - return ret_val; - } - - if (duplex == HALF_DUPLEX) - hw->fc = E1000_FC_NONE; - - /* Now we call a subroutine to actually force the MAC - * controller to use the correct flow control settings. - */ - ret_val = e1000_force_mac_fc(hw); - if (ret_val) { - DEBUGOUT("Error forcing flow control settings\n"); - return ret_val; - } - } else { - DEBUGOUT("Copper PHY and Auto Neg has not completed.\n"); - } - } - return E1000_SUCCESS; + s32 ret_val; + u16 mii_status_reg; + u16 mii_nway_adv_reg; + u16 mii_nway_lp_ability_reg; + u16 speed; + u16 duplex; + + DEBUGFUNC("e1000_config_fc_after_link_up"); + + /* Check for the case where we have fiber media and auto-neg failed + * so we had to force link. In this case, we need to force the + * configuration of the MAC to match the "fc" parameter. + */ + if (((hw->media_type == e1000_media_type_fiber) && (hw->autoneg_failed)) + || ((hw->media_type == e1000_media_type_internal_serdes) + && (hw->autoneg_failed)) + || ((hw->media_type == e1000_media_type_copper) + && (!hw->autoneg))) { + ret_val = e1000_force_mac_fc(hw); + if (ret_val) { + DEBUGOUT("Error forcing flow control settings\n"); + return ret_val; + } + } + + /* Check for the case where we have copper media and auto-neg is + * enabled. In this case, we need to check and see if Auto-Neg + * has completed, and if so, how the PHY and link partner has + * flow control configured. + */ + if ((hw->media_type == e1000_media_type_copper) && hw->autoneg) { + /* Read the MII Status Register and check to see if AutoNeg + * has completed. We read this twice because this reg has + * some "sticky" (latched) bits. + */ + ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg); + if (ret_val) + return ret_val; + ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg); + if (ret_val) + return ret_val; + + if (mii_status_reg & MII_SR_AUTONEG_COMPLETE) { + /* The AutoNeg process has completed, so we now need to + * read both the Auto Negotiation Advertisement Register + * (Address 4) and the Auto_Negotiation Base Page Ability + * Register (Address 5) to determine how flow control was + * negotiated. + */ + ret_val = e1000_read_phy_reg(hw, PHY_AUTONEG_ADV, + &mii_nway_adv_reg); + if (ret_val) + return ret_val; + ret_val = e1000_read_phy_reg(hw, PHY_LP_ABILITY, + &mii_nway_lp_ability_reg); + if (ret_val) + return ret_val; + + /* Two bits in the Auto Negotiation Advertisement Register + * (Address 4) and two bits in the Auto Negotiation Base + * Page Ability Register (Address 5) determine flow control + * for both the PHY and the link partner. The following + * table, taken out of the IEEE 802.3ab/D6.0 dated March 25, + * 1999, describes these PAUSE resolution bits and how flow + * control is determined based upon these settings. + * NOTE: DC = Don't Care + * + * LOCAL DEVICE | LINK PARTNER + * PAUSE | ASM_DIR | PAUSE | ASM_DIR | NIC Resolution + *-------|---------|-------|---------|-------------------- + * 0 | 0 | DC | DC | E1000_FC_NONE + * 0 | 1 | 0 | DC | E1000_FC_NONE + * 0 | 1 | 1 | 0 | E1000_FC_NONE + * 0 | 1 | 1 | 1 | E1000_FC_TX_PAUSE + * 1 | 0 | 0 | DC | E1000_FC_NONE + * 1 | DC | 1 | DC | E1000_FC_FULL + * 1 | 1 | 0 | 0 | E1000_FC_NONE + * 1 | 1 | 0 | 1 | E1000_FC_RX_PAUSE + * + */ + /* Are both PAUSE bits set to 1? If so, this implies + * Symmetric Flow Control is enabled at both ends. The + * ASM_DIR bits are irrelevant per the spec. + * + * For Symmetric Flow Control: + * + * LOCAL DEVICE | LINK PARTNER + * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result + *-------|---------|-------|---------|-------------------- + * 1 | DC | 1 | DC | E1000_FC_FULL + * + */ + if ((mii_nway_adv_reg & NWAY_AR_PAUSE) && + (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE)) { + /* Now we need to check if the user selected RX ONLY + * of pause frames. In this case, we had to advertise + * FULL flow control because we could not advertise RX + * ONLY. Hence, we must now check to see if we need to + * turn OFF the TRANSMISSION of PAUSE frames. + */ + if (hw->original_fc == E1000_FC_FULL) { + hw->fc = E1000_FC_FULL; + DEBUGOUT("Flow Control = FULL.\n"); + } else { + hw->fc = E1000_FC_RX_PAUSE; + DEBUGOUT + ("Flow Control = RX PAUSE frames only.\n"); + } + } + /* For receiving PAUSE frames ONLY. + * + * LOCAL DEVICE | LINK PARTNER + * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result + *-------|---------|-------|---------|-------------------- + * 0 | 1 | 1 | 1 | E1000_FC_TX_PAUSE + * + */ + else if (!(mii_nway_adv_reg & NWAY_AR_PAUSE) && + (mii_nway_adv_reg & NWAY_AR_ASM_DIR) && + (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && + (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) + { + hw->fc = E1000_FC_TX_PAUSE; + DEBUGOUT + ("Flow Control = TX PAUSE frames only.\n"); + } + /* For transmitting PAUSE frames ONLY. + * + * LOCAL DEVICE | LINK PARTNER + * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result + *-------|---------|-------|---------|-------------------- + * 1 | 1 | 0 | 1 | E1000_FC_RX_PAUSE + * + */ + else if ((mii_nway_adv_reg & NWAY_AR_PAUSE) && + (mii_nway_adv_reg & NWAY_AR_ASM_DIR) && + !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && + (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) + { + hw->fc = E1000_FC_RX_PAUSE; + DEBUGOUT + ("Flow Control = RX PAUSE frames only.\n"); + } + /* Per the IEEE spec, at this point flow control should be + * disabled. However, we want to consider that we could + * be connected to a legacy switch that doesn't advertise + * desired flow control, but can be forced on the link + * partner. So if we advertised no flow control, that is + * what we will resolve to. If we advertised some kind of + * receive capability (Rx Pause Only or Full Flow Control) + * and the link partner advertised none, we will configure + * ourselves to enable Rx Flow Control only. We can do + * this safely for two reasons: If the link partner really + * didn't want flow control enabled, and we enable Rx, no + * harm done since we won't be receiving any PAUSE frames + * anyway. If the intent on the link partner was to have + * flow control enabled, then by us enabling RX only, we + * can at least receive pause frames and process them. + * This is a good idea because in most cases, since we are + * predominantly a server NIC, more times than not we will + * be asked to delay transmission of packets than asking + * our link partner to pause transmission of frames. + */ + else if ((hw->original_fc == E1000_FC_NONE || + hw->original_fc == E1000_FC_TX_PAUSE) || + hw->fc_strict_ieee) { + hw->fc = E1000_FC_NONE; + DEBUGOUT("Flow Control = NONE.\n"); + } else { + hw->fc = E1000_FC_RX_PAUSE; + DEBUGOUT + ("Flow Control = RX PAUSE frames only.\n"); + } + + /* Now we need to do one last check... If we auto- + * negotiated to HALF DUPLEX, flow control should not be + * enabled per IEEE 802.3 spec. + */ + ret_val = + e1000_get_speed_and_duplex(hw, &speed, &duplex); + if (ret_val) { + DEBUGOUT + ("Error getting link speed and duplex\n"); + return ret_val; + } + + if (duplex == HALF_DUPLEX) + hw->fc = E1000_FC_NONE; + + /* Now we call a subroutine to actually force the MAC + * controller to use the correct flow control settings. + */ + ret_val = e1000_force_mac_fc(hw); + if (ret_val) { + DEBUGOUT + ("Error forcing flow control settings\n"); + return ret_val; + } + } else { + DEBUGOUT + ("Copper PHY and Auto Neg has not completed.\n"); + } + } + return E1000_SUCCESS; } -/****************************************************************************** - * Checks to see if the link status of the hardware has changed. +/** + * e1000_check_for_serdes_link_generic - Check for link (Serdes) + * @hw: pointer to the HW structure * - * hw - Struct containing variables accessed by shared code + * Checks for link up on the hardware. If link is not up and we have + * a signal, then we need to force link up. + */ +static s32 e1000_check_for_serdes_link_generic(struct e1000_hw *hw) +{ + u32 rxcw; + u32 ctrl; + u32 status; + s32 ret_val = E1000_SUCCESS; + + DEBUGFUNC("e1000_check_for_serdes_link_generic"); + + ctrl = er32(CTRL); + status = er32(STATUS); + rxcw = er32(RXCW); + + /* + * If we don't have link (auto-negotiation failed or link partner + * cannot auto-negotiate), and our link partner is not trying to + * auto-negotiate with us (we are receiving idles or data), + * we need to force link up. We also need to give auto-negotiation + * time to complete. + */ + /* (ctrl & E1000_CTRL_SWDPIN1) == 1 == have signal */ + if ((!(status & E1000_STATUS_LU)) && (!(rxcw & E1000_RXCW_C))) { + if (hw->autoneg_failed == 0) { + hw->autoneg_failed = 1; + goto out; + } + DEBUGOUT("NOT RXing /C/, disable AutoNeg and force link.\n"); + + /* Disable auto-negotiation in the TXCW register */ + ew32(TXCW, (hw->txcw & ~E1000_TXCW_ANE)); + + /* Force link-up and also force full-duplex. */ + ctrl = er32(CTRL); + ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FD); + ew32(CTRL, ctrl); + + /* Configure Flow Control after forcing link up. */ + ret_val = e1000_config_fc_after_link_up(hw); + if (ret_val) { + DEBUGOUT("Error configuring flow control\n"); + goto out; + } + } else if ((ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) { + /* + * If we are forcing link and we are receiving /C/ ordered + * sets, re-enable auto-negotiation in the TXCW register + * and disable forced link in the Device Control register + * in an attempt to auto-negotiate with our link partner. + */ + DEBUGOUT("RXing /C/, enable AutoNeg and stop forcing link.\n"); + ew32(TXCW, hw->txcw); + ew32(CTRL, (ctrl & ~E1000_CTRL_SLU)); + + hw->serdes_has_link = true; + } else if (!(E1000_TXCW_ANE & er32(TXCW))) { + /* + * If we force link for non-auto-negotiation switch, check + * link status based on MAC synchronization for internal + * serdes media type. + */ + /* SYNCH bit and IV bit are sticky. */ + udelay(10); + rxcw = er32(RXCW); + if (rxcw & E1000_RXCW_SYNCH) { + if (!(rxcw & E1000_RXCW_IV)) { + hw->serdes_has_link = true; + DEBUGOUT("SERDES: Link up - forced.\n"); + } + } else { + hw->serdes_has_link = false; + DEBUGOUT("SERDES: Link down - force failed.\n"); + } + } + + if (E1000_TXCW_ANE & er32(TXCW)) { + status = er32(STATUS); + if (status & E1000_STATUS_LU) { + /* SYNCH bit and IV bit are sticky, so reread rxcw. */ + udelay(10); + rxcw = er32(RXCW); + if (rxcw & E1000_RXCW_SYNCH) { + if (!(rxcw & E1000_RXCW_IV)) { + hw->serdes_has_link = true; + DEBUGOUT("SERDES: Link up - autoneg " + "completed successfully.\n"); + } else { + hw->serdes_has_link = false; + DEBUGOUT("SERDES: Link down - invalid" + "codewords detected in autoneg.\n"); + } + } else { + hw->serdes_has_link = false; + DEBUGOUT("SERDES: Link down - no sync.\n"); + } + } else { + hw->serdes_has_link = false; + DEBUGOUT("SERDES: Link down - autoneg failed\n"); + } + } + + out: + return ret_val; +} + +/** + * e1000_check_for_link + * @hw: Struct containing variables accessed by shared code * + * Checks to see if the link status of the hardware has changed. * Called by any function that needs to check the link status of the adapter. - *****************************************************************************/ + */ s32 e1000_check_for_link(struct e1000_hw *hw) { - u32 rxcw = 0; - u32 ctrl; - u32 status; - u32 rctl; - u32 icr; - u32 signal = 0; - s32 ret_val; - u16 phy_data; - - DEBUGFUNC("e1000_check_for_link"); - - ctrl = er32(CTRL); - status = er32(STATUS); - - /* On adapters with a MAC newer than 82544, SW Defineable pin 1 will be - * set when the optics detect a signal. On older adapters, it will be - * cleared when there is a signal. This applies to fiber media only. - */ - if ((hw->media_type == e1000_media_type_fiber) || - (hw->media_type == e1000_media_type_internal_serdes)) { - rxcw = er32(RXCW); - - if (hw->media_type == e1000_media_type_fiber) { - signal = (hw->mac_type > e1000_82544) ? E1000_CTRL_SWDPIN1 : 0; - if (status & E1000_STATUS_LU) - hw->get_link_status = false; - } - } - - /* If we have a copper PHY then we only want to go out to the PHY - * registers to see if Auto-Neg has completed and/or if our link - * status has changed. The get_link_status flag will be set if we - * receive a Link Status Change interrupt or we have Rx Sequence - * Errors. - */ - if ((hw->media_type == e1000_media_type_copper) && hw->get_link_status) { - /* First we want to see if the MII Status Register reports - * link. If so, then we want to get the current speed/duplex - * of the PHY. - * Read the register twice since the link bit is sticky. - */ - ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data); - if (ret_val) - return ret_val; - ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data); - if (ret_val) - return ret_val; - - if (phy_data & MII_SR_LINK_STATUS) { - hw->get_link_status = false; - /* Check if there was DownShift, must be checked immediately after - * link-up */ - e1000_check_downshift(hw); - - /* If we are on 82544 or 82543 silicon and speed/duplex - * are forced to 10H or 10F, then we will implement the polarity - * reversal workaround. We disable interrupts first, and upon - * returning, place the devices interrupt state to its previous - * value except for the link status change interrupt which will - * happen due to the execution of this workaround. - */ - - if ((hw->mac_type == e1000_82544 || hw->mac_type == e1000_82543) && - (!hw->autoneg) && - (hw->forced_speed_duplex == e1000_10_full || - hw->forced_speed_duplex == e1000_10_half)) { - ew32(IMC, 0xffffffff); - ret_val = e1000_polarity_reversal_workaround(hw); - icr = er32(ICR); - ew32(ICS, (icr & ~E1000_ICS_LSC)); - ew32(IMS, IMS_ENABLE_MASK); - } - - } else { - /* No link detected */ - e1000_config_dsp_after_link_change(hw, false); - return 0; - } - - /* If we are forcing speed/duplex, then we simply return since - * we have already determined whether we have link or not. - */ - if (!hw->autoneg) return -E1000_ERR_CONFIG; - - /* optimize the dsp settings for the igp phy */ - e1000_config_dsp_after_link_change(hw, true); - - /* We have a M88E1000 PHY and Auto-Neg is enabled. If we - * have Si on board that is 82544 or newer, Auto - * Speed Detection takes care of MAC speed/duplex - * configuration. So we only need to configure Collision - * Distance in the MAC. Otherwise, we need to force - * speed/duplex on the MAC to the current PHY speed/duplex - * settings. - */ - if (hw->mac_type >= e1000_82544) - e1000_config_collision_dist(hw); - else { - ret_val = e1000_config_mac_to_phy(hw); - if (ret_val) { - DEBUGOUT("Error configuring MAC to PHY settings\n"); - return ret_val; - } - } - - /* Configure Flow Control now that Auto-Neg has completed. First, we - * need to restore the desired flow control settings because we may - * have had to re-autoneg with a different link partner. - */ - ret_val = e1000_config_fc_after_link_up(hw); - if (ret_val) { - DEBUGOUT("Error configuring flow control\n"); - return ret_val; - } - - /* At this point we know that we are on copper and we have - * auto-negotiated link. These are conditions for checking the link - * partner capability register. We use the link speed to determine if - * TBI compatibility needs to be turned on or off. If the link is not - * at gigabit speed, then TBI compatibility is not needed. If we are - * at gigabit speed, we turn on TBI compatibility. - */ - if (hw->tbi_compatibility_en) { - u16 speed, duplex; - ret_val = e1000_get_speed_and_duplex(hw, &speed, &duplex); - if (ret_val) { - DEBUGOUT("Error getting link speed and duplex\n"); - return ret_val; - } - if (speed != SPEED_1000) { - /* If link speed is not set to gigabit speed, we do not need - * to enable TBI compatibility. - */ - if (hw->tbi_compatibility_on) { - /* If we previously were in the mode, turn it off. */ - rctl = er32(RCTL); - rctl &= ~E1000_RCTL_SBP; - ew32(RCTL, rctl); - hw->tbi_compatibility_on = false; - } - } else { - /* If TBI compatibility is was previously off, turn it on. For - * compatibility with a TBI link partner, we will store bad - * packets. Some frames have an additional byte on the end and - * will look like CRC errors to the hardware. - */ - if (!hw->tbi_compatibility_on) { - hw->tbi_compatibility_on = true; - rctl = er32(RCTL); - rctl |= E1000_RCTL_SBP; - ew32(RCTL, rctl); - } - } - } - } - /* If we don't have link (auto-negotiation failed or link partner cannot - * auto-negotiate), the cable is plugged in (we have signal), and our - * link partner is not trying to auto-negotiate with us (we are receiving - * idles or data), we need to force link up. We also need to give - * auto-negotiation time to complete, in case the cable was just plugged - * in. The autoneg_failed flag does this. - */ - else if ((((hw->media_type == e1000_media_type_fiber) && - ((ctrl & E1000_CTRL_SWDPIN1) == signal)) || - (hw->media_type == e1000_media_type_internal_serdes)) && - (!(status & E1000_STATUS_LU)) && - (!(rxcw & E1000_RXCW_C))) { - if (hw->autoneg_failed == 0) { - hw->autoneg_failed = 1; - return 0; - } - DEBUGOUT("NOT RXing /C/, disable AutoNeg and force link.\n"); - - /* Disable auto-negotiation in the TXCW register */ - ew32(TXCW, (hw->txcw & ~E1000_TXCW_ANE)); - - /* Force link-up and also force full-duplex. */ - ctrl = er32(CTRL); - ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FD); - ew32(CTRL, ctrl); - - /* Configure Flow Control after forcing link up. */ - ret_val = e1000_config_fc_after_link_up(hw); - if (ret_val) { - DEBUGOUT("Error configuring flow control\n"); - return ret_val; - } - } - /* If we are forcing link and we are receiving /C/ ordered sets, re-enable - * auto-negotiation in the TXCW register and disable forced link in the - * Device Control register in an attempt to auto-negotiate with our link - * partner. - */ - else if (((hw->media_type == e1000_media_type_fiber) || - (hw->media_type == e1000_media_type_internal_serdes)) && - (ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) { - DEBUGOUT("RXing /C/, enable AutoNeg and stop forcing link.\n"); - ew32(TXCW, hw->txcw); - ew32(CTRL, (ctrl & ~E1000_CTRL_SLU)); - - hw->serdes_link_down = false; - } - /* If we force link for non-auto-negotiation switch, check link status - * based on MAC synchronization for internal serdes media type. - */ - else if ((hw->media_type == e1000_media_type_internal_serdes) && - !(E1000_TXCW_ANE & er32(TXCW))) { - /* SYNCH bit and IV bit are sticky. */ - udelay(10); - if (E1000_RXCW_SYNCH & er32(RXCW)) { - if (!(rxcw & E1000_RXCW_IV)) { - hw->serdes_link_down = false; - DEBUGOUT("SERDES: Link is up.\n"); - } - } else { - hw->serdes_link_down = true; - DEBUGOUT("SERDES: Link is down.\n"); - } - } - if ((hw->media_type == e1000_media_type_internal_serdes) && - (E1000_TXCW_ANE & er32(TXCW))) { - hw->serdes_link_down = !(E1000_STATUS_LU & er32(STATUS)); - } - return E1000_SUCCESS; + u32 rxcw = 0; + u32 ctrl; + u32 status; + u32 rctl; + u32 icr; + u32 signal = 0; + s32 ret_val; + u16 phy_data; + + DEBUGFUNC("e1000_check_for_link"); + + ctrl = er32(CTRL); + status = er32(STATUS); + + /* On adapters with a MAC newer than 82544, SW Definable pin 1 will be + * set when the optics detect a signal. On older adapters, it will be + * cleared when there is a signal. This applies to fiber media only. + */ + if ((hw->media_type == e1000_media_type_fiber) || + (hw->media_type == e1000_media_type_internal_serdes)) { + rxcw = er32(RXCW); + + if (hw->media_type == e1000_media_type_fiber) { + signal = + (hw->mac_type > + e1000_82544) ? E1000_CTRL_SWDPIN1 : 0; + if (status & E1000_STATUS_LU) + hw->get_link_status = false; + } + } + + /* If we have a copper PHY then we only want to go out to the PHY + * registers to see if Auto-Neg has completed and/or if our link + * status has changed. The get_link_status flag will be set if we + * receive a Link Status Change interrupt or we have Rx Sequence + * Errors. + */ + if ((hw->media_type == e1000_media_type_copper) && hw->get_link_status) { + /* First we want to see if the MII Status Register reports + * link. If so, then we want to get the current speed/duplex + * of the PHY. + * Read the register twice since the link bit is sticky. + */ + ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data); + if (ret_val) + return ret_val; + ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data); + if (ret_val) + return ret_val; + + if (phy_data & MII_SR_LINK_STATUS) { + hw->get_link_status = false; + /* Check if there was DownShift, must be checked immediately after + * link-up */ + e1000_check_downshift(hw); + + /* If we are on 82544 or 82543 silicon and speed/duplex + * are forced to 10H or 10F, then we will implement the polarity + * reversal workaround. We disable interrupts first, and upon + * returning, place the devices interrupt state to its previous + * value except for the link status change interrupt which will + * happen due to the execution of this workaround. + */ + + if ((hw->mac_type == e1000_82544 + || hw->mac_type == e1000_82543) && (!hw->autoneg) + && (hw->forced_speed_duplex == e1000_10_full + || hw->forced_speed_duplex == e1000_10_half)) { + ew32(IMC, 0xffffffff); + ret_val = + e1000_polarity_reversal_workaround(hw); + icr = er32(ICR); + ew32(ICS, (icr & ~E1000_ICS_LSC)); + ew32(IMS, IMS_ENABLE_MASK); + } + + } else { + /* No link detected */ + e1000_config_dsp_after_link_change(hw, false); + return 0; + } + + /* If we are forcing speed/duplex, then we simply return since + * we have already determined whether we have link or not. + */ + if (!hw->autoneg) + return -E1000_ERR_CONFIG; + + /* optimize the dsp settings for the igp phy */ + e1000_config_dsp_after_link_change(hw, true); + + /* We have a M88E1000 PHY and Auto-Neg is enabled. If we + * have Si on board that is 82544 or newer, Auto + * Speed Detection takes care of MAC speed/duplex + * configuration. So we only need to configure Collision + * Distance in the MAC. Otherwise, we need to force + * speed/duplex on the MAC to the current PHY speed/duplex + * settings. + */ + if (hw->mac_type >= e1000_82544) + e1000_config_collision_dist(hw); + else { + ret_val = e1000_config_mac_to_phy(hw); + if (ret_val) { + DEBUGOUT + ("Error configuring MAC to PHY settings\n"); + return ret_val; + } + } + + /* Configure Flow Control now that Auto-Neg has completed. First, we + * need to restore the desired flow control settings because we may + * have had to re-autoneg with a different link partner. + */ + ret_val = e1000_config_fc_after_link_up(hw); + if (ret_val) { + DEBUGOUT("Error configuring flow control\n"); + return ret_val; + } + + /* At this point we know that we are on copper and we have + * auto-negotiated link. These are conditions for checking the link + * partner capability register. We use the link speed to determine if + * TBI compatibility needs to be turned on or off. If the link is not + * at gigabit speed, then TBI compatibility is not needed. If we are + * at gigabit speed, we turn on TBI compatibility. + */ + if (hw->tbi_compatibility_en) { + u16 speed, duplex; + ret_val = + e1000_get_speed_and_duplex(hw, &speed, &duplex); + if (ret_val) { + DEBUGOUT + ("Error getting link speed and duplex\n"); + return ret_val; + } + if (speed != SPEED_1000) { + /* If link speed is not set to gigabit speed, we do not need + * to enable TBI compatibility. + */ + if (hw->tbi_compatibility_on) { + /* If we previously were in the mode, turn it off. */ + rctl = er32(RCTL); + rctl &= ~E1000_RCTL_SBP; + ew32(RCTL, rctl); + hw->tbi_compatibility_on = false; + } + } else { + /* If TBI compatibility is was previously off, turn it on. For + * compatibility with a TBI link partner, we will store bad + * packets. Some frames have an additional byte on the end and + * will look like CRC errors to to the hardware. + */ + if (!hw->tbi_compatibility_on) { + hw->tbi_compatibility_on = true; + rctl = er32(RCTL); + rctl |= E1000_RCTL_SBP; + ew32(RCTL, rctl); + } + } + } + } + + if ((hw->media_type == e1000_media_type_fiber) || + (hw->media_type == e1000_media_type_internal_serdes)) + e1000_check_for_serdes_link_generic(hw); + + return E1000_SUCCESS; } -/****************************************************************************** +/** + * e1000_get_speed_and_duplex + * @hw: Struct containing variables accessed by shared code + * @speed: Speed of the connection + * @duplex: Duplex setting of the connection + * Detects the current speed and duplex settings of the hardware. - * - * hw - Struct containing variables accessed by shared code - * speed - Speed of the connection - * duplex - Duplex setting of the connection - *****************************************************************************/ + */ s32 e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 *speed, u16 *duplex) { - u32 status; - s32 ret_val; - u16 phy_data; - - DEBUGFUNC("e1000_get_speed_and_duplex"); - - if (hw->mac_type >= e1000_82543) { - status = er32(STATUS); - if (status & E1000_STATUS_SPEED_1000) { - *speed = SPEED_1000; - DEBUGOUT("1000 Mbs, "); - } else if (status & E1000_STATUS_SPEED_100) { - *speed = SPEED_100; - DEBUGOUT("100 Mbs, "); - } else { - *speed = SPEED_10; - DEBUGOUT("10 Mbs, "); - } - - if (status & E1000_STATUS_FD) { - *duplex = FULL_DUPLEX; - DEBUGOUT("Full Duplex\n"); - } else { - *duplex = HALF_DUPLEX; - DEBUGOUT(" Half Duplex\n"); - } - } else { - DEBUGOUT("1000 Mbs, Full Duplex\n"); - *speed = SPEED_1000; - *duplex = FULL_DUPLEX; - } - - /* IGP01 PHY may advertise full duplex operation after speed downgrade even - * if it is operating at half duplex. Here we set the duplex settings to - * match the duplex in the link partner's capabilities. - */ - if (hw->phy_type == e1000_phy_igp && hw->speed_downgraded) { - ret_val = e1000_read_phy_reg(hw, PHY_AUTONEG_EXP, &phy_data); - if (ret_val) - return ret_val; - - if (!(phy_data & NWAY_ER_LP_NWAY_CAPS)) - *duplex = HALF_DUPLEX; - else { - ret_val = e1000_read_phy_reg(hw, PHY_LP_ABILITY, &phy_data); - if (ret_val) - return ret_val; - if ((*speed == SPEED_100 && !(phy_data & NWAY_LPAR_100TX_FD_CAPS)) || - (*speed == SPEED_10 && !(phy_data & NWAY_LPAR_10T_FD_CAPS))) - *duplex = HALF_DUPLEX; - } - } - - if ((hw->mac_type == e1000_80003es2lan) && - (hw->media_type == e1000_media_type_copper)) { - if (*speed == SPEED_1000) - ret_val = e1000_configure_kmrn_for_1000(hw); - else - ret_val = e1000_configure_kmrn_for_10_100(hw, *duplex); - if (ret_val) - return ret_val; - } - - if ((hw->phy_type == e1000_phy_igp_3) && (*speed == SPEED_1000)) { - ret_val = e1000_kumeran_lock_loss_workaround(hw); - if (ret_val) - return ret_val; - } - - return E1000_SUCCESS; + u32 status; + s32 ret_val; + u16 phy_data; + + DEBUGFUNC("e1000_get_speed_and_duplex"); + + if (hw->mac_type >= e1000_82543) { + status = er32(STATUS); + if (status & E1000_STATUS_SPEED_1000) { + *speed = SPEED_1000; + DEBUGOUT("1000 Mbs, "); + } else if (status & E1000_STATUS_SPEED_100) { + *speed = SPEED_100; + DEBUGOUT("100 Mbs, "); + } else { + *speed = SPEED_10; + DEBUGOUT("10 Mbs, "); + } + + if (status & E1000_STATUS_FD) { + *duplex = FULL_DUPLEX; + DEBUGOUT("Full Duplex\n"); + } else { + *duplex = HALF_DUPLEX; + DEBUGOUT(" Half Duplex\n"); + } + } else { + DEBUGOUT("1000 Mbs, Full Duplex\n"); + *speed = SPEED_1000; + *duplex = FULL_DUPLEX; + } + + /* IGP01 PHY may advertise full duplex operation after speed downgrade even + * if it is operating at half duplex. Here we set the duplex settings to + * match the duplex in the link partner's capabilities. + */ + if (hw->phy_type == e1000_phy_igp && hw->speed_downgraded) { + ret_val = e1000_read_phy_reg(hw, PHY_AUTONEG_EXP, &phy_data); + if (ret_val) + return ret_val; + + if (!(phy_data & NWAY_ER_LP_NWAY_CAPS)) + *duplex = HALF_DUPLEX; + else { + ret_val = + e1000_read_phy_reg(hw, PHY_LP_ABILITY, &phy_data); + if (ret_val) + return ret_val; + if ((*speed == SPEED_100 + && !(phy_data & NWAY_LPAR_100TX_FD_CAPS)) + || (*speed == SPEED_10 + && !(phy_data & NWAY_LPAR_10T_FD_CAPS))) + *duplex = HALF_DUPLEX; + } + } + + return E1000_SUCCESS; } -/****************************************************************************** -* Blocks until autoneg completes or times out (~4.5 seconds) -* -* hw - Struct containing variables accessed by shared code -******************************************************************************/ +/** + * e1000_wait_autoneg + * @hw: Struct containing variables accessed by shared code + * + * Blocks until autoneg completes or times out (~4.5 seconds) + */ static s32 e1000_wait_autoneg(struct e1000_hw *hw) { - s32 ret_val; - u16 i; - u16 phy_data; - - DEBUGFUNC("e1000_wait_autoneg"); - DEBUGOUT("Waiting for Auto-Neg to complete.\n"); - - /* We will wait for autoneg to complete or 4.5 seconds to expire. */ - for (i = PHY_AUTO_NEG_TIME; i > 0; i--) { - /* Read the MII Status Register and wait for Auto-Neg - * Complete bit to be set. - */ - ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data); - if (ret_val) - return ret_val; - ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data); - if (ret_val) - return ret_val; - if (phy_data & MII_SR_AUTONEG_COMPLETE) { - return E1000_SUCCESS; - } - msleep(100); - } - return E1000_SUCCESS; + s32 ret_val; + u16 i; + u16 phy_data; + + DEBUGFUNC("e1000_wait_autoneg"); + DEBUGOUT("Waiting for Auto-Neg to complete.\n"); + + /* We will wait for autoneg to complete or 4.5 seconds to expire. */ + for (i = PHY_AUTO_NEG_TIME; i > 0; i--) { + /* Read the MII Status Register and wait for Auto-Neg + * Complete bit to be set. + */ + ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data); + if (ret_val) + return ret_val; + ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data); + if (ret_val) + return ret_val; + if (phy_data & MII_SR_AUTONEG_COMPLETE) { + return E1000_SUCCESS; + } + msleep(100); + } + return E1000_SUCCESS; } -/****************************************************************************** -* Raises the Management Data Clock -* -* hw - Struct containing variables accessed by shared code -* ctrl - Device control register's current value -******************************************************************************/ +/** + * e1000_raise_mdi_clk - Raises the Management Data Clock + * @hw: Struct containing variables accessed by shared code + * @ctrl: Device control register's current value + */ static void e1000_raise_mdi_clk(struct e1000_hw *hw, u32 *ctrl) { - /* Raise the clock input to the Management Data Clock (by setting the MDC - * bit), and then delay 10 microseconds. - */ - ew32(CTRL, (*ctrl | E1000_CTRL_MDC)); - E1000_WRITE_FLUSH(); - udelay(10); + /* Raise the clock input to the Management Data Clock (by setting the MDC + * bit), and then delay 10 microseconds. + */ + ew32(CTRL, (*ctrl | E1000_CTRL_MDC)); + E1000_WRITE_FLUSH(); + udelay(10); } -/****************************************************************************** -* Lowers the Management Data Clock -* -* hw - Struct containing variables accessed by shared code -* ctrl - Device control register's current value -******************************************************************************/ +/** + * e1000_lower_mdi_clk - Lowers the Management Data Clock + * @hw: Struct containing variables accessed by shared code + * @ctrl: Device control register's current value + */ static void e1000_lower_mdi_clk(struct e1000_hw *hw, u32 *ctrl) { - /* Lower the clock input to the Management Data Clock (by clearing the MDC - * bit), and then delay 10 microseconds. - */ - ew32(CTRL, (*ctrl & ~E1000_CTRL_MDC)); - E1000_WRITE_FLUSH(); - udelay(10); + /* Lower the clock input to the Management Data Clock (by clearing the MDC + * bit), and then delay 10 microseconds. + */ + ew32(CTRL, (*ctrl & ~E1000_CTRL_MDC)); + E1000_WRITE_FLUSH(); + udelay(10); } -/****************************************************************************** -* Shifts data bits out to the PHY -* -* hw - Struct containing variables accessed by shared code -* data - Data to send out to the PHY -* count - Number of bits to shift out -* -* Bits are shifted out in MSB to LSB order. -******************************************************************************/ +/** + * e1000_shift_out_mdi_bits - Shifts data bits out to the PHY + * @hw: Struct containing variables accessed by shared code + * @data: Data to send out to the PHY + * @count: Number of bits to shift out + * + * Bits are shifted out in MSB to LSB order. + */ static void e1000_shift_out_mdi_bits(struct e1000_hw *hw, u32 data, u16 count) { - u32 ctrl; - u32 mask; - - /* We need to shift "count" number of bits out to the PHY. So, the value - * in the "data" parameter will be shifted out to the PHY one bit at a - * time. In order to do this, "data" must be broken down into bits. - */ - mask = 0x01; - mask <<= (count - 1); - - ctrl = er32(CTRL); - - /* Set MDIO_DIR and MDC_DIR direction bits to be used as output pins. */ - ctrl |= (E1000_CTRL_MDIO_DIR | E1000_CTRL_MDC_DIR); - - while (mask) { - /* A "1" is shifted out to the PHY by setting the MDIO bit to "1" and - * then raising and lowering the Management Data Clock. A "0" is - * shifted out to the PHY by setting the MDIO bit to "0" and then - * raising and lowering the clock. - */ - if (data & mask) - ctrl |= E1000_CTRL_MDIO; - else - ctrl &= ~E1000_CTRL_MDIO; - - ew32(CTRL, ctrl); - E1000_WRITE_FLUSH(); - - udelay(10); - - e1000_raise_mdi_clk(hw, &ctrl); - e1000_lower_mdi_clk(hw, &ctrl); - - mask = mask >> 1; - } -} - -/****************************************************************************** -* Shifts data bits in from the PHY -* -* hw - Struct containing variables accessed by shared code -* -* Bits are shifted in in MSB to LSB order. -******************************************************************************/ -static u16 e1000_shift_in_mdi_bits(struct e1000_hw *hw) -{ - u32 ctrl; - u16 data = 0; - u8 i; - - /* In order to read a register from the PHY, we need to shift in a total - * of 18 bits from the PHY. The first two bit (turnaround) times are used - * to avoid contention on the MDIO pin when a read operation is performed. - * These two bits are ignored by us and thrown away. Bits are "shifted in" - * by raising the input to the Management Data Clock (setting the MDC bit), - * and then reading the value of the MDIO bit. - */ - ctrl = er32(CTRL); - - /* Clear MDIO_DIR (SWDPIO1) to indicate this bit is to be used as input. */ - ctrl &= ~E1000_CTRL_MDIO_DIR; - ctrl &= ~E1000_CTRL_MDIO; - - ew32(CTRL, ctrl); - E1000_WRITE_FLUSH(); - - /* Raise and Lower the clock before reading in the data. This accounts for - * the turnaround bits. The first clock occurred when we clocked out the - * last bit of the Register Address. - */ - e1000_raise_mdi_clk(hw, &ctrl); - e1000_lower_mdi_clk(hw, &ctrl); - - for (data = 0, i = 0; i < 16; i++) { - data = data << 1; - e1000_raise_mdi_clk(hw, &ctrl); - ctrl = er32(CTRL); - /* Check to see if we shifted in a "1". */ - if (ctrl & E1000_CTRL_MDIO) - data |= 1; - e1000_lower_mdi_clk(hw, &ctrl); - } - - e1000_raise_mdi_clk(hw, &ctrl); - e1000_lower_mdi_clk(hw, &ctrl); - - return data; -} - -static s32 e1000_swfw_sync_acquire(struct e1000_hw *hw, u16 mask) -{ - u32 swfw_sync = 0; - u32 swmask = mask; - u32 fwmask = mask << 16; - s32 timeout = 200; + u32 ctrl; + u32 mask; - DEBUGFUNC("e1000_swfw_sync_acquire"); - - if (hw->swfwhw_semaphore_present) - return e1000_get_software_flag(hw); + /* We need to shift "count" number of bits out to the PHY. So, the value + * in the "data" parameter will be shifted out to the PHY one bit at a + * time. In order to do this, "data" must be broken down into bits. + */ + mask = 0x01; + mask <<= (count - 1); - if (!hw->swfw_sync_present) - return e1000_get_hw_eeprom_semaphore(hw); + ctrl = er32(CTRL); - while (timeout) { - if (e1000_get_hw_eeprom_semaphore(hw)) - return -E1000_ERR_SWFW_SYNC; + /* Set MDIO_DIR and MDC_DIR direction bits to be used as output pins. */ + ctrl |= (E1000_CTRL_MDIO_DIR | E1000_CTRL_MDC_DIR); - swfw_sync = er32(SW_FW_SYNC); - if (!(swfw_sync & (fwmask | swmask))) { - break; - } + while (mask) { + /* A "1" is shifted out to the PHY by setting the MDIO bit to "1" and + * then raising and lowering the Management Data Clock. A "0" is + * shifted out to the PHY by setting the MDIO bit to "0" and then + * raising and lowering the clock. + */ + if (data & mask) + ctrl |= E1000_CTRL_MDIO; + else + ctrl &= ~E1000_CTRL_MDIO; - /* firmware currently using resource (fwmask) */ - /* or other software thread currently using resource (swmask) */ - e1000_put_hw_eeprom_semaphore(hw); - mdelay(5); - timeout--; - } + ew32(CTRL, ctrl); + E1000_WRITE_FLUSH(); - if (!timeout) { - DEBUGOUT("Driver can't access resource, SW_FW_SYNC timeout.\n"); - return -E1000_ERR_SWFW_SYNC; - } + udelay(10); - swfw_sync |= swmask; - ew32(SW_FW_SYNC, swfw_sync); + e1000_raise_mdi_clk(hw, &ctrl); + e1000_lower_mdi_clk(hw, &ctrl); - e1000_put_hw_eeprom_semaphore(hw); - return E1000_SUCCESS; + mask = mask >> 1; + } } -static void e1000_swfw_sync_release(struct e1000_hw *hw, u16 mask) +/** + * e1000_shift_in_mdi_bits - Shifts data bits in from the PHY + * @hw: Struct containing variables accessed by shared code + * + * Bits are shifted in in MSB to LSB order. + */ +static u16 e1000_shift_in_mdi_bits(struct e1000_hw *hw) { - u32 swfw_sync; - u32 swmask = mask; + u32 ctrl; + u16 data = 0; + u8 i; - DEBUGFUNC("e1000_swfw_sync_release"); + /* In order to read a register from the PHY, we need to shift in a total + * of 18 bits from the PHY. The first two bit (turnaround) times are used + * to avoid contention on the MDIO pin when a read operation is performed. + * These two bits are ignored by us and thrown away. Bits are "shifted in" + * by raising the input to the Management Data Clock (setting the MDC bit), + * and then reading the value of the MDIO bit. + */ + ctrl = er32(CTRL); - if (hw->swfwhw_semaphore_present) { - e1000_release_software_flag(hw); - return; - } + /* Clear MDIO_DIR (SWDPIO1) to indicate this bit is to be used as input. */ + ctrl &= ~E1000_CTRL_MDIO_DIR; + ctrl &= ~E1000_CTRL_MDIO; - if (!hw->swfw_sync_present) { - e1000_put_hw_eeprom_semaphore(hw); - return; - } + ew32(CTRL, ctrl); + E1000_WRITE_FLUSH(); - /* if (e1000_get_hw_eeprom_semaphore(hw)) - * return -E1000_ERR_SWFW_SYNC; */ - while (e1000_get_hw_eeprom_semaphore(hw) != E1000_SUCCESS); - /* empty */ + /* Raise and Lower the clock before reading in the data. This accounts for + * the turnaround bits. The first clock occurred when we clocked out the + * last bit of the Register Address. + */ + e1000_raise_mdi_clk(hw, &ctrl); + e1000_lower_mdi_clk(hw, &ctrl); + + for (data = 0, i = 0; i < 16; i++) { + data = data << 1; + e1000_raise_mdi_clk(hw, &ctrl); + ctrl = er32(CTRL); + /* Check to see if we shifted in a "1". */ + if (ctrl & E1000_CTRL_MDIO) + data |= 1; + e1000_lower_mdi_clk(hw, &ctrl); + } - swfw_sync = er32(SW_FW_SYNC); - swfw_sync &= ~swmask; - ew32(SW_FW_SYNC, swfw_sync); + e1000_raise_mdi_clk(hw, &ctrl); + e1000_lower_mdi_clk(hw, &ctrl); - e1000_put_hw_eeprom_semaphore(hw); + return data; } -/***************************************************************************** -* Reads the value from a PHY register, if the value is on a specific non zero -* page, sets the page first. -* hw - Struct containing variables accessed by shared code -* reg_addr - address of the PHY register to read -******************************************************************************/ + +/** + * e1000_read_phy_reg - read a phy register + * @hw: Struct containing variables accessed by shared code + * @reg_addr: address of the PHY register to read + * + * Reads the value from a PHY register, if the value is on a specific non zero + * page, sets the page first. + */ s32 e1000_read_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 *phy_data) { - u32 ret_val; - u16 swfw; - - DEBUGFUNC("e1000_read_phy_reg"); - - if ((hw->mac_type == e1000_80003es2lan) && - (er32(STATUS) & E1000_STATUS_FUNC_1)) { - swfw = E1000_SWFW_PHY1_SM; - } else { - swfw = E1000_SWFW_PHY0_SM; - } - if (e1000_swfw_sync_acquire(hw, swfw)) - return -E1000_ERR_SWFW_SYNC; - - if ((hw->phy_type == e1000_phy_igp || - hw->phy_type == e1000_phy_igp_3 || - hw->phy_type == e1000_phy_igp_2) && - (reg_addr > MAX_PHY_MULTI_PAGE_REG)) { - ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT, - (u16)reg_addr); - if (ret_val) { - e1000_swfw_sync_release(hw, swfw); - return ret_val; - } - } else if (hw->phy_type == e1000_phy_gg82563) { - if (((reg_addr & MAX_PHY_REG_ADDRESS) > MAX_PHY_MULTI_PAGE_REG) || - (hw->mac_type == e1000_80003es2lan)) { - /* Select Configuration Page */ - if ((reg_addr & MAX_PHY_REG_ADDRESS) < GG82563_MIN_ALT_REG) { - ret_val = e1000_write_phy_reg_ex(hw, GG82563_PHY_PAGE_SELECT, - (u16)((u16)reg_addr >> GG82563_PAGE_SHIFT)); - } else { - /* Use Alternative Page Select register to access - * registers 30 and 31 - */ - ret_val = e1000_write_phy_reg_ex(hw, - GG82563_PHY_PAGE_SELECT_ALT, - (u16)((u16)reg_addr >> GG82563_PAGE_SHIFT)); - } - - if (ret_val) { - e1000_swfw_sync_release(hw, swfw); - return ret_val; - } - } - } - - ret_val = e1000_read_phy_reg_ex(hw, MAX_PHY_REG_ADDRESS & reg_addr, - phy_data); - - e1000_swfw_sync_release(hw, swfw); - return ret_val; + u32 ret_val; + + DEBUGFUNC("e1000_read_phy_reg"); + + if ((hw->phy_type == e1000_phy_igp) && + (reg_addr > MAX_PHY_MULTI_PAGE_REG)) { + ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT, + (u16) reg_addr); + if (ret_val) + return ret_val; + } + + ret_val = e1000_read_phy_reg_ex(hw, MAX_PHY_REG_ADDRESS & reg_addr, + phy_data); + + return ret_val; } static s32 e1000_read_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr, u16 *phy_data) { - u32 i; - u32 mdic = 0; - const u32 phy_addr = 1; - - DEBUGFUNC("e1000_read_phy_reg_ex"); - - if (reg_addr > MAX_PHY_REG_ADDRESS) { - DEBUGOUT1("PHY Address %d is out of range\n", reg_addr); - return -E1000_ERR_PARAM; - } - - if (hw->mac_type > e1000_82543) { - /* Set up Op-code, Phy Address, and register address in the MDI - * Control register. The MAC will take care of interfacing with the - * PHY to retrieve the desired data. - */ - mdic = ((reg_addr << E1000_MDIC_REG_SHIFT) | - (phy_addr << E1000_MDIC_PHY_SHIFT) | - (E1000_MDIC_OP_READ)); - - ew32(MDIC, mdic); - - /* Poll the ready bit to see if the MDI read completed */ - for (i = 0; i < 64; i++) { - udelay(50); - mdic = er32(MDIC); - if (mdic & E1000_MDIC_READY) break; - } - if (!(mdic & E1000_MDIC_READY)) { - DEBUGOUT("MDI Read did not complete\n"); - return -E1000_ERR_PHY; - } - if (mdic & E1000_MDIC_ERROR) { - DEBUGOUT("MDI Error\n"); - return -E1000_ERR_PHY; - } - *phy_data = (u16)mdic; - } else { - /* We must first send a preamble through the MDIO pin to signal the - * beginning of an MII instruction. This is done by sending 32 - * consecutive "1" bits. - */ - e1000_shift_out_mdi_bits(hw, PHY_PREAMBLE, PHY_PREAMBLE_SIZE); - - /* Now combine the next few fields that are required for a read - * operation. We use this method instead of calling the - * e1000_shift_out_mdi_bits routine five different times. The format of - * a MII read instruction consists of a shift out of 14 bits and is - * defined as follows: - * <Preamble><SOF><Op Code><Phy Addr><Reg Addr> - * followed by a shift in of 18 bits. This first two bits shifted in - * are TurnAround bits used to avoid contention on the MDIO pin when a - * READ operation is performed. These two bits are thrown away - * followed by a shift in of 16 bits which contains the desired data. - */ - mdic = ((reg_addr) | (phy_addr << 5) | - (PHY_OP_READ << 10) | (PHY_SOF << 12)); - - e1000_shift_out_mdi_bits(hw, mdic, 14); - - /* Now that we've shifted out the read command to the MII, we need to - * "shift in" the 16-bit value (18 total bits) of the requested PHY - * register address. - */ - *phy_data = e1000_shift_in_mdi_bits(hw); - } - return E1000_SUCCESS; + u32 i; + u32 mdic = 0; + const u32 phy_addr = 1; + + DEBUGFUNC("e1000_read_phy_reg_ex"); + + if (reg_addr > MAX_PHY_REG_ADDRESS) { + DEBUGOUT1("PHY Address %d is out of range\n", reg_addr); + return -E1000_ERR_PARAM; + } + + if (hw->mac_type > e1000_82543) { + /* Set up Op-code, Phy Address, and register address in the MDI + * Control register. The MAC will take care of interfacing with the + * PHY to retrieve the desired data. + */ + mdic = ((reg_addr << E1000_MDIC_REG_SHIFT) | + (phy_addr << E1000_MDIC_PHY_SHIFT) | + (E1000_MDIC_OP_READ)); + + ew32(MDIC, mdic); + + /* Poll the ready bit to see if the MDI read completed */ + for (i = 0; i < 64; i++) { + udelay(50); + mdic = er32(MDIC); + if (mdic & E1000_MDIC_READY) + break; + } + if (!(mdic & E1000_MDIC_READY)) { + DEBUGOUT("MDI Read did not complete\n"); + return -E1000_ERR_PHY; + } + if (mdic & E1000_MDIC_ERROR) { + DEBUGOUT("MDI Error\n"); + return -E1000_ERR_PHY; + } + *phy_data = (u16) mdic; + } else { + /* We must first send a preamble through the MDIO pin to signal the + * beginning of an MII instruction. This is done by sending 32 + * consecutive "1" bits. + */ + e1000_shift_out_mdi_bits(hw, PHY_PREAMBLE, PHY_PREAMBLE_SIZE); + + /* Now combine the next few fields that are required for a read + * operation. We use this method instead of calling the + * e1000_shift_out_mdi_bits routine five different times. The format of + * a MII read instruction consists of a shift out of 14 bits and is + * defined as follows: + * <Preamble><SOF><Op Code><Phy Addr><Reg Addr> + * followed by a shift in of 18 bits. This first two bits shifted in + * are TurnAround bits used to avoid contention on the MDIO pin when a + * READ operation is performed. These two bits are thrown away + * followed by a shift in of 16 bits which contains the desired data. + */ + mdic = ((reg_addr) | (phy_addr << 5) | + (PHY_OP_READ << 10) | (PHY_SOF << 12)); + + e1000_shift_out_mdi_bits(hw, mdic, 14); + + /* Now that we've shifted out the read command to the MII, we need to + * "shift in" the 16-bit value (18 total bits) of the requested PHY + * register address. + */ + *phy_data = e1000_shift_in_mdi_bits(hw); + } + return E1000_SUCCESS; } -/****************************************************************************** -* Writes a value to a PHY register -* -* hw - Struct containing variables accessed by shared code -* reg_addr - address of the PHY register to write -* data - data to write to the PHY -******************************************************************************/ +/** + * e1000_write_phy_reg - write a phy register + * + * @hw: Struct containing variables accessed by shared code + * @reg_addr: address of the PHY register to write + * @data: data to write to the PHY + + * Writes a value to a PHY register + */ s32 e1000_write_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 phy_data) { - u32 ret_val; - u16 swfw; - - DEBUGFUNC("e1000_write_phy_reg"); - - if ((hw->mac_type == e1000_80003es2lan) && - (er32(STATUS) & E1000_STATUS_FUNC_1)) { - swfw = E1000_SWFW_PHY1_SM; - } else { - swfw = E1000_SWFW_PHY0_SM; - } - if (e1000_swfw_sync_acquire(hw, swfw)) - return -E1000_ERR_SWFW_SYNC; - - if ((hw->phy_type == e1000_phy_igp || - hw->phy_type == e1000_phy_igp_3 || - hw->phy_type == e1000_phy_igp_2) && - (reg_addr > MAX_PHY_MULTI_PAGE_REG)) { - ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT, - (u16)reg_addr); - if (ret_val) { - e1000_swfw_sync_release(hw, swfw); - return ret_val; - } - } else if (hw->phy_type == e1000_phy_gg82563) { - if (((reg_addr & MAX_PHY_REG_ADDRESS) > MAX_PHY_MULTI_PAGE_REG) || - (hw->mac_type == e1000_80003es2lan)) { - /* Select Configuration Page */ - if ((reg_addr & MAX_PHY_REG_ADDRESS) < GG82563_MIN_ALT_REG) { - ret_val = e1000_write_phy_reg_ex(hw, GG82563_PHY_PAGE_SELECT, - (u16)((u16)reg_addr >> GG82563_PAGE_SHIFT)); - } else { - /* Use Alternative Page Select register to access - * registers 30 and 31 - */ - ret_val = e1000_write_phy_reg_ex(hw, - GG82563_PHY_PAGE_SELECT_ALT, - (u16)((u16)reg_addr >> GG82563_PAGE_SHIFT)); - } - - if (ret_val) { - e1000_swfw_sync_release(hw, swfw); - return ret_val; - } - } - } - - ret_val = e1000_write_phy_reg_ex(hw, MAX_PHY_REG_ADDRESS & reg_addr, - phy_data); - - e1000_swfw_sync_release(hw, swfw); - return ret_val; + u32 ret_val; + + DEBUGFUNC("e1000_write_phy_reg"); + + if ((hw->phy_type == e1000_phy_igp) && + (reg_addr > MAX_PHY_MULTI_PAGE_REG)) { + ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT, + (u16) reg_addr); + if (ret_val) + return ret_val; + } + + ret_val = e1000_write_phy_reg_ex(hw, MAX_PHY_REG_ADDRESS & reg_addr, + phy_data); + + return ret_val; } static s32 e1000_write_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr, u16 phy_data) { - u32 i; - u32 mdic = 0; - const u32 phy_addr = 1; - - DEBUGFUNC("e1000_write_phy_reg_ex"); - - if (reg_addr > MAX_PHY_REG_ADDRESS) { - DEBUGOUT1("PHY Address %d is out of range\n", reg_addr); - return -E1000_ERR_PARAM; - } - - if (hw->mac_type > e1000_82543) { - /* Set up Op-code, Phy Address, register address, and data intended - * for the PHY register in the MDI Control register. The MAC will take - * care of interfacing with the PHY to send the desired data. - */ - mdic = (((u32)phy_data) | - (reg_addr << E1000_MDIC_REG_SHIFT) | - (phy_addr << E1000_MDIC_PHY_SHIFT) | - (E1000_MDIC_OP_WRITE)); - - ew32(MDIC, mdic); - - /* Poll the ready bit to see if the MDI read completed */ - for (i = 0; i < 641; i++) { - udelay(5); - mdic = er32(MDIC); - if (mdic & E1000_MDIC_READY) break; - } - if (!(mdic & E1000_MDIC_READY)) { - DEBUGOUT("MDI Write did not complete\n"); - return -E1000_ERR_PHY; - } - } else { - /* We'll need to use the SW defined pins to shift the write command - * out to the PHY. We first send a preamble to the PHY to signal the - * beginning of the MII instruction. This is done by sending 32 - * consecutive "1" bits. - */ - e1000_shift_out_mdi_bits(hw, PHY_PREAMBLE, PHY_PREAMBLE_SIZE); - - /* Now combine the remaining required fields that will indicate a - * write operation. We use this method instead of calling the - * e1000_shift_out_mdi_bits routine for each field in the command. The - * format of a MII write instruction is as follows: - * <Preamble><SOF><Op Code><Phy Addr><Reg Addr><Turnaround><Data>. - */ - mdic = ((PHY_TURNAROUND) | (reg_addr << 2) | (phy_addr << 7) | - (PHY_OP_WRITE << 12) | (PHY_SOF << 14)); - mdic <<= 16; - mdic |= (u32)phy_data; - - e1000_shift_out_mdi_bits(hw, mdic, 32); - } - - return E1000_SUCCESS; -} + u32 i; + u32 mdic = 0; + const u32 phy_addr = 1; -static s32 e1000_read_kmrn_reg(struct e1000_hw *hw, u32 reg_addr, u16 *data) -{ - u32 reg_val; - u16 swfw; - DEBUGFUNC("e1000_read_kmrn_reg"); - - if ((hw->mac_type == e1000_80003es2lan) && - (er32(STATUS) & E1000_STATUS_FUNC_1)) { - swfw = E1000_SWFW_PHY1_SM; - } else { - swfw = E1000_SWFW_PHY0_SM; - } - if (e1000_swfw_sync_acquire(hw, swfw)) - return -E1000_ERR_SWFW_SYNC; - - /* Write register address */ - reg_val = ((reg_addr << E1000_KUMCTRLSTA_OFFSET_SHIFT) & - E1000_KUMCTRLSTA_OFFSET) | - E1000_KUMCTRLSTA_REN; - ew32(KUMCTRLSTA, reg_val); - udelay(2); - - /* Read the data returned */ - reg_val = er32(KUMCTRLSTA); - *data = (u16)reg_val; - - e1000_swfw_sync_release(hw, swfw); - return E1000_SUCCESS; -} + DEBUGFUNC("e1000_write_phy_reg_ex"); -static s32 e1000_write_kmrn_reg(struct e1000_hw *hw, u32 reg_addr, u16 data) -{ - u32 reg_val; - u16 swfw; - DEBUGFUNC("e1000_write_kmrn_reg"); - - if ((hw->mac_type == e1000_80003es2lan) && - (er32(STATUS) & E1000_STATUS_FUNC_1)) { - swfw = E1000_SWFW_PHY1_SM; - } else { - swfw = E1000_SWFW_PHY0_SM; - } - if (e1000_swfw_sync_acquire(hw, swfw)) - return -E1000_ERR_SWFW_SYNC; - - reg_val = ((reg_addr << E1000_KUMCTRLSTA_OFFSET_SHIFT) & - E1000_KUMCTRLSTA_OFFSET) | data; - ew32(KUMCTRLSTA, reg_val); - udelay(2); - - e1000_swfw_sync_release(hw, swfw); - return E1000_SUCCESS; + if (reg_addr > MAX_PHY_REG_ADDRESS) { + DEBUGOUT1("PHY Address %d is out of range\n", reg_addr); + return -E1000_ERR_PARAM; + } + + if (hw->mac_type > e1000_82543) { + /* Set up Op-code, Phy Address, register address, and data intended + * for the PHY register in the MDI Control register. The MAC will take + * care of interfacing with the PHY to send the desired data. + */ + mdic = (((u32) phy_data) | + (reg_addr << E1000_MDIC_REG_SHIFT) | + (phy_addr << E1000_MDIC_PHY_SHIFT) | + (E1000_MDIC_OP_WRITE)); + + ew32(MDIC, mdic); + + /* Poll the ready bit to see if the MDI read completed */ + for (i = 0; i < 641; i++) { + udelay(5); + mdic = er32(MDIC); + if (mdic & E1000_MDIC_READY) + break; + } + if (!(mdic & E1000_MDIC_READY)) { + DEBUGOUT("MDI Write did not complete\n"); + return -E1000_ERR_PHY; + } + } else { + /* We'll need to use the SW defined pins to shift the write command + * out to the PHY. We first send a preamble to the PHY to signal the + * beginning of the MII instruction. This is done by sending 32 + * consecutive "1" bits. + */ + e1000_shift_out_mdi_bits(hw, PHY_PREAMBLE, PHY_PREAMBLE_SIZE); + + /* Now combine the remaining required fields that will indicate a + * write operation. We use this method instead of calling the + * e1000_shift_out_mdi_bits routine for each field in the command. The + * format of a MII write instruction is as follows: + * <Preamble><SOF><Op Code><Phy Addr><Reg Addr><Turnaround><Data>. + */ + mdic = ((PHY_TURNAROUND) | (reg_addr << 2) | (phy_addr << 7) | + (PHY_OP_WRITE << 12) | (PHY_SOF << 14)); + mdic <<= 16; + mdic |= (u32) phy_data; + + e1000_shift_out_mdi_bits(hw, mdic, 32); + } + + return E1000_SUCCESS; } -/****************************************************************************** -* Returns the PHY to the power-on reset state -* -* hw - Struct containing variables accessed by shared code -******************************************************************************/ +/** + * e1000_phy_hw_reset - reset the phy, hardware style + * @hw: Struct containing variables accessed by shared code + * + * Returns the PHY to the power-on reset state + */ s32 e1000_phy_hw_reset(struct e1000_hw *hw) { - u32 ctrl, ctrl_ext; - u32 led_ctrl; - s32 ret_val; - u16 swfw; - - DEBUGFUNC("e1000_phy_hw_reset"); - - /* In the case of the phy reset being blocked, it's not an error, we - * simply return success without performing the reset. */ - ret_val = e1000_check_phy_reset_block(hw); - if (ret_val) - return E1000_SUCCESS; - - DEBUGOUT("Resetting Phy...\n"); - - if (hw->mac_type > e1000_82543) { - if ((hw->mac_type == e1000_80003es2lan) && - (er32(STATUS) & E1000_STATUS_FUNC_1)) { - swfw = E1000_SWFW_PHY1_SM; - } else { - swfw = E1000_SWFW_PHY0_SM; - } - if (e1000_swfw_sync_acquire(hw, swfw)) { - DEBUGOUT("Unable to acquire swfw sync\n"); - return -E1000_ERR_SWFW_SYNC; - } - /* Read the device control register and assert the E1000_CTRL_PHY_RST - * bit. Then, take it out of reset. - * For pre-e1000_82571 hardware, we delay for 10ms between the assert - * and deassert. For e1000_82571 hardware and later, we instead delay - * for 50us between and 10ms after the deassertion. - */ - ctrl = er32(CTRL); - ew32(CTRL, ctrl | E1000_CTRL_PHY_RST); - E1000_WRITE_FLUSH(); - - if (hw->mac_type < e1000_82571) - msleep(10); - else - udelay(100); - - ew32(CTRL, ctrl); - E1000_WRITE_FLUSH(); - - if (hw->mac_type >= e1000_82571) - mdelay(10); - - e1000_swfw_sync_release(hw, swfw); - } else { - /* Read the Extended Device Control Register, assert the PHY_RESET_DIR - * bit to put the PHY into reset. Then, take it out of reset. - */ - ctrl_ext = er32(CTRL_EXT); - ctrl_ext |= E1000_CTRL_EXT_SDP4_DIR; - ctrl_ext &= ~E1000_CTRL_EXT_SDP4_DATA; - ew32(CTRL_EXT, ctrl_ext); - E1000_WRITE_FLUSH(); - msleep(10); - ctrl_ext |= E1000_CTRL_EXT_SDP4_DATA; - ew32(CTRL_EXT, ctrl_ext); - E1000_WRITE_FLUSH(); - } - udelay(150); - - if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) { - /* Configure activity LED after PHY reset */ - led_ctrl = er32(LEDCTL); - led_ctrl &= IGP_ACTIVITY_LED_MASK; - led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE); - ew32(LEDCTL, led_ctrl); - } - - /* Wait for FW to finish PHY configuration. */ - ret_val = e1000_get_phy_cfg_done(hw); - if (ret_val != E1000_SUCCESS) - return ret_val; - e1000_release_software_semaphore(hw); - - if ((hw->mac_type == e1000_ich8lan) && (hw->phy_type == e1000_phy_igp_3)) - ret_val = e1000_init_lcd_from_nvm(hw); - - return ret_val; + u32 ctrl, ctrl_ext; + u32 led_ctrl; + s32 ret_val; + + DEBUGFUNC("e1000_phy_hw_reset"); + + DEBUGOUT("Resetting Phy...\n"); + + if (hw->mac_type > e1000_82543) { + /* Read the device control register and assert the E1000_CTRL_PHY_RST + * bit. Then, take it out of reset. + * For e1000 hardware, we delay for 10ms between the assert + * and deassert. + */ + ctrl = er32(CTRL); + ew32(CTRL, ctrl | E1000_CTRL_PHY_RST); + E1000_WRITE_FLUSH(); + + msleep(10); + + ew32(CTRL, ctrl); + E1000_WRITE_FLUSH(); + + } else { + /* Read the Extended Device Control Register, assert the PHY_RESET_DIR + * bit to put the PHY into reset. Then, take it out of reset. + */ + ctrl_ext = er32(CTRL_EXT); + ctrl_ext |= E1000_CTRL_EXT_SDP4_DIR; + ctrl_ext &= ~E1000_CTRL_EXT_SDP4_DATA; + ew32(CTRL_EXT, ctrl_ext); + E1000_WRITE_FLUSH(); + msleep(10); + ctrl_ext |= E1000_CTRL_EXT_SDP4_DATA; + ew32(CTRL_EXT, ctrl_ext); + E1000_WRITE_FLUSH(); + } + udelay(150); + + if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) { + /* Configure activity LED after PHY reset */ + led_ctrl = er32(LEDCTL); + led_ctrl &= IGP_ACTIVITY_LED_MASK; + led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE); + ew32(LEDCTL, led_ctrl); + } + + /* Wait for FW to finish PHY configuration. */ + ret_val = e1000_get_phy_cfg_done(hw); + if (ret_val != E1000_SUCCESS) + return ret_val; + + return ret_val; } -/****************************************************************************** -* Resets the PHY -* -* hw - Struct containing variables accessed by shared code -* -* Sets bit 15 of the MII Control register -******************************************************************************/ +/** + * e1000_phy_reset - reset the phy to commit settings + * @hw: Struct containing variables accessed by shared code + * + * Resets the PHY + * Sets bit 15 of the MII Control register + */ s32 e1000_phy_reset(struct e1000_hw *hw) { - s32 ret_val; - u16 phy_data; - - DEBUGFUNC("e1000_phy_reset"); - - /* In the case of the phy reset being blocked, it's not an error, we - * simply return success without performing the reset. */ - ret_val = e1000_check_phy_reset_block(hw); - if (ret_val) - return E1000_SUCCESS; - - switch (hw->phy_type) { - case e1000_phy_igp: - case e1000_phy_igp_2: - case e1000_phy_igp_3: - case e1000_phy_ife: - ret_val = e1000_phy_hw_reset(hw); - if (ret_val) - return ret_val; - break; - default: - ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data); - if (ret_val) - return ret_val; - - phy_data |= MII_CR_RESET; - ret_val = e1000_write_phy_reg(hw, PHY_CTRL, phy_data); - if (ret_val) - return ret_val; - - udelay(1); - break; - } - - if (hw->phy_type == e1000_phy_igp || hw->phy_type == e1000_phy_igp_2) - e1000_phy_init_script(hw); - - return E1000_SUCCESS; -} + s32 ret_val; + u16 phy_data; -/****************************************************************************** -* Work-around for 82566 power-down: on D3 entry- -* 1) disable gigabit link -* 2) write VR power-down enable -* 3) read it back -* if successful continue, else issue LCD reset and repeat -* -* hw - struct containing variables accessed by shared code -******************************************************************************/ -void e1000_phy_powerdown_workaround(struct e1000_hw *hw) -{ - s32 reg; - u16 phy_data; - s32 retry = 0; + DEBUGFUNC("e1000_phy_reset"); - DEBUGFUNC("e1000_phy_powerdown_workaround"); + switch (hw->phy_type) { + case e1000_phy_igp: + ret_val = e1000_phy_hw_reset(hw); + if (ret_val) + return ret_val; + break; + default: + ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data); + if (ret_val) + return ret_val; - if (hw->phy_type != e1000_phy_igp_3) - return; + phy_data |= MII_CR_RESET; + ret_val = e1000_write_phy_reg(hw, PHY_CTRL, phy_data); + if (ret_val) + return ret_val; - do { - /* Disable link */ - reg = er32(PHY_CTRL); - ew32(PHY_CTRL, reg | E1000_PHY_CTRL_GBE_DISABLE | - E1000_PHY_CTRL_NOND0A_GBE_DISABLE); + udelay(1); + break; + } - /* Write VR power-down enable - bits 9:8 should be 10b */ - e1000_read_phy_reg(hw, IGP3_VR_CTRL, &phy_data); - phy_data |= (1 << 9); - phy_data &= ~(1 << 8); - e1000_write_phy_reg(hw, IGP3_VR_CTRL, phy_data); + if (hw->phy_type == e1000_phy_igp) + e1000_phy_init_script(hw); - /* Read it back and test */ - e1000_read_phy_reg(hw, IGP3_VR_CTRL, &phy_data); - if (((phy_data & IGP3_VR_CTRL_MODE_MASK) == IGP3_VR_CTRL_MODE_SHUT) || retry) - break; + return E1000_SUCCESS; +} - /* Issue PHY reset and repeat at most one more time */ - reg = er32(CTRL); - ew32(CTRL, reg | E1000_CTRL_PHY_RST); - retry++; - } while (retry); +/** + * e1000_detect_gig_phy - check the phy type + * @hw: Struct containing variables accessed by shared code + * + * Probes the expected PHY address for known PHY IDs + */ +static s32 e1000_detect_gig_phy(struct e1000_hw *hw) +{ + s32 phy_init_status, ret_val; + u16 phy_id_high, phy_id_low; + bool match = false; - return; + DEBUGFUNC("e1000_detect_gig_phy"); -} + if (hw->phy_id != 0) + return E1000_SUCCESS; -/****************************************************************************** -* Work-around for 82566 Kumeran PCS lock loss: -* On link status change (i.e. PCI reset, speed change) and link is up and -* speed is gigabit- -* 0) if workaround is optionally disabled do nothing -* 1) wait 1ms for Kumeran link to come up -* 2) check Kumeran Diagnostic register PCS lock loss bit -* 3) if not set the link is locked (all is good), otherwise... -* 4) reset the PHY -* 5) repeat up to 10 times -* Note: this is only called for IGP3 copper when speed is 1gb. -* -* hw - struct containing variables accessed by shared code -******************************************************************************/ -static s32 e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw) -{ - s32 ret_val; - s32 reg; - s32 cnt; - u16 phy_data; - - if (hw->kmrn_lock_loss_workaround_disabled) - return E1000_SUCCESS; - - /* Make sure link is up before proceeding. If not just return. - * Attempting this while link is negotiating fouled up link - * stability */ - ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data); - ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data); - - if (phy_data & MII_SR_LINK_STATUS) { - for (cnt = 0; cnt < 10; cnt++) { - /* read once to clear */ - ret_val = e1000_read_phy_reg(hw, IGP3_KMRN_DIAG, &phy_data); - if (ret_val) - return ret_val; - /* and again to get new status */ - ret_val = e1000_read_phy_reg(hw, IGP3_KMRN_DIAG, &phy_data); - if (ret_val) - return ret_val; - - /* check for PCS lock */ - if (!(phy_data & IGP3_KMRN_DIAG_PCS_LOCK_LOSS)) - return E1000_SUCCESS; - - /* Issue PHY reset */ - e1000_phy_hw_reset(hw); - mdelay(5); - } - /* Disable GigE link negotiation */ - reg = er32(PHY_CTRL); - ew32(PHY_CTRL, reg | E1000_PHY_CTRL_GBE_DISABLE | - E1000_PHY_CTRL_NOND0A_GBE_DISABLE); - - /* unable to acquire PCS lock */ - return E1000_ERR_PHY; - } - - return E1000_SUCCESS; -} + /* Read the PHY ID Registers to identify which PHY is onboard. */ + ret_val = e1000_read_phy_reg(hw, PHY_ID1, &phy_id_high); + if (ret_val) + return ret_val; -/****************************************************************************** -* Probes the expected PHY address for known PHY IDs -* -* hw - Struct containing variables accessed by shared code -******************************************************************************/ -static s32 e1000_detect_gig_phy(struct e1000_hw *hw) -{ - s32 phy_init_status, ret_val; - u16 phy_id_high, phy_id_low; - bool match = false; - - DEBUGFUNC("e1000_detect_gig_phy"); - - if (hw->phy_id != 0) - return E1000_SUCCESS; - - /* The 82571 firmware may still be configuring the PHY. In this - * case, we cannot access the PHY until the configuration is done. So - * we explicitly set the PHY values. */ - if (hw->mac_type == e1000_82571 || - hw->mac_type == e1000_82572) { - hw->phy_id = IGP01E1000_I_PHY_ID; - hw->phy_type = e1000_phy_igp_2; - return E1000_SUCCESS; - } - - /* ESB-2 PHY reads require e1000_phy_gg82563 to be set because of a work- - * around that forces PHY page 0 to be set or the reads fail. The rest of - * the code in this routine uses e1000_read_phy_reg to read the PHY ID. - * So for ESB-2 we need to have this set so our reads won't fail. If the - * attached PHY is not a e1000_phy_gg82563, the routines below will figure - * this out as well. */ - if (hw->mac_type == e1000_80003es2lan) - hw->phy_type = e1000_phy_gg82563; - - /* Read the PHY ID Registers to identify which PHY is onboard. */ - ret_val = e1000_read_phy_reg(hw, PHY_ID1, &phy_id_high); - if (ret_val) - return ret_val; - - hw->phy_id = (u32)(phy_id_high << 16); - udelay(20); - ret_val = e1000_read_phy_reg(hw, PHY_ID2, &phy_id_low); - if (ret_val) - return ret_val; - - hw->phy_id |= (u32)(phy_id_low & PHY_REVISION_MASK); - hw->phy_revision = (u32)phy_id_low & ~PHY_REVISION_MASK; - - switch (hw->mac_type) { - case e1000_82543: - if (hw->phy_id == M88E1000_E_PHY_ID) match = true; - break; - case e1000_82544: - if (hw->phy_id == M88E1000_I_PHY_ID) match = true; - break; - case e1000_82540: - case e1000_82545: - case e1000_82545_rev_3: - case e1000_82546: - case e1000_82546_rev_3: - if (hw->phy_id == M88E1011_I_PHY_ID) match = true; - break; - case e1000_82541: - case e1000_82541_rev_2: - case e1000_82547: - case e1000_82547_rev_2: - if (hw->phy_id == IGP01E1000_I_PHY_ID) match = true; - break; - case e1000_82573: - if (hw->phy_id == M88E1111_I_PHY_ID) match = true; - break; - case e1000_80003es2lan: - if (hw->phy_id == GG82563_E_PHY_ID) match = true; - break; - case e1000_ich8lan: - if (hw->phy_id == IGP03E1000_E_PHY_ID) match = true; - if (hw->phy_id == IFE_E_PHY_ID) match = true; - if (hw->phy_id == IFE_PLUS_E_PHY_ID) match = true; - if (hw->phy_id == IFE_C_E_PHY_ID) match = true; - break; - default: - DEBUGOUT1("Invalid MAC type %d\n", hw->mac_type); - return -E1000_ERR_CONFIG; - } - phy_init_status = e1000_set_phy_type(hw); - - if ((match) && (phy_init_status == E1000_SUCCESS)) { - DEBUGOUT1("PHY ID 0x%X detected\n", hw->phy_id); - return E1000_SUCCESS; - } - DEBUGOUT1("Invalid PHY ID 0x%X\n", hw->phy_id); - return -E1000_ERR_PHY; + hw->phy_id = (u32) (phy_id_high << 16); + udelay(20); + ret_val = e1000_read_phy_reg(hw, PHY_ID2, &phy_id_low); + if (ret_val) + return ret_val; + + hw->phy_id |= (u32) (phy_id_low & PHY_REVISION_MASK); + hw->phy_revision = (u32) phy_id_low & ~PHY_REVISION_MASK; + + switch (hw->mac_type) { + case e1000_82543: + if (hw->phy_id == M88E1000_E_PHY_ID) + match = true; + break; + case e1000_82544: + if (hw->phy_id == M88E1000_I_PHY_ID) + match = true; + break; + case e1000_82540: + case e1000_82545: + case e1000_82545_rev_3: + case e1000_82546: + case e1000_82546_rev_3: + if (hw->phy_id == M88E1011_I_PHY_ID) + match = true; + break; + case e1000_82541: + case e1000_82541_rev_2: + case e1000_82547: + case e1000_82547_rev_2: + if (hw->phy_id == IGP01E1000_I_PHY_ID) + match = true; + break; + default: + DEBUGOUT1("Invalid MAC type %d\n", hw->mac_type); + return -E1000_ERR_CONFIG; + } + phy_init_status = e1000_set_phy_type(hw); + + if ((match) && (phy_init_status == E1000_SUCCESS)) { + DEBUGOUT1("PHY ID 0x%X detected\n", hw->phy_id); + return E1000_SUCCESS; + } + DEBUGOUT1("Invalid PHY ID 0x%X\n", hw->phy_id); + return -E1000_ERR_PHY; } -/****************************************************************************** -* Resets the PHY's DSP -* -* hw - Struct containing variables accessed by shared code -******************************************************************************/ +/** + * e1000_phy_reset_dsp - reset DSP + * @hw: Struct containing variables accessed by shared code + * + * Resets the PHY's DSP + */ static s32 e1000_phy_reset_dsp(struct e1000_hw *hw) { - s32 ret_val; - DEBUGFUNC("e1000_phy_reset_dsp"); - - do { - if (hw->phy_type != e1000_phy_gg82563) { - ret_val = e1000_write_phy_reg(hw, 29, 0x001d); - if (ret_val) break; - } - ret_val = e1000_write_phy_reg(hw, 30, 0x00c1); - if (ret_val) break; - ret_val = e1000_write_phy_reg(hw, 30, 0x0000); - if (ret_val) break; - ret_val = E1000_SUCCESS; - } while (0); - - return ret_val; + s32 ret_val; + DEBUGFUNC("e1000_phy_reset_dsp"); + + do { + ret_val = e1000_write_phy_reg(hw, 29, 0x001d); + if (ret_val) + break; + ret_val = e1000_write_phy_reg(hw, 30, 0x00c1); + if (ret_val) + break; + ret_val = e1000_write_phy_reg(hw, 30, 0x0000); + if (ret_val) + break; + ret_val = E1000_SUCCESS; + } while (0); + + return ret_val; } -/****************************************************************************** -* Get PHY information from various PHY registers for igp PHY only. -* -* hw - Struct containing variables accessed by shared code -* phy_info - PHY information structure -******************************************************************************/ +/** + * e1000_phy_igp_get_info - get igp specific registers + * @hw: Struct containing variables accessed by shared code + * @phy_info: PHY information structure + * + * Get PHY information from various PHY registers for igp PHY only. + */ static s32 e1000_phy_igp_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info) { - s32 ret_val; - u16 phy_data, min_length, max_length, average; - e1000_rev_polarity polarity; - - DEBUGFUNC("e1000_phy_igp_get_info"); - - /* The downshift status is checked only once, after link is established, - * and it stored in the hw->speed_downgraded parameter. */ - phy_info->downshift = (e1000_downshift)hw->speed_downgraded; - - /* IGP01E1000 does not need to support it. */ - phy_info->extended_10bt_distance = e1000_10bt_ext_dist_enable_normal; - - /* IGP01E1000 always correct polarity reversal */ - phy_info->polarity_correction = e1000_polarity_reversal_enabled; - - /* Check polarity status */ - ret_val = e1000_check_polarity(hw, &polarity); - if (ret_val) - return ret_val; - - phy_info->cable_polarity = polarity; - - ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_STATUS, &phy_data); - if (ret_val) - return ret_val; - - phy_info->mdix_mode = (e1000_auto_x_mode)((phy_data & IGP01E1000_PSSR_MDIX) >> - IGP01E1000_PSSR_MDIX_SHIFT); - - if ((phy_data & IGP01E1000_PSSR_SPEED_MASK) == - IGP01E1000_PSSR_SPEED_1000MBPS) { - /* Local/Remote Receiver Information are only valid at 1000 Mbps */ - ret_val = e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_data); - if (ret_val) - return ret_val; - - phy_info->local_rx = ((phy_data & SR_1000T_LOCAL_RX_STATUS) >> - SR_1000T_LOCAL_RX_STATUS_SHIFT) ? - e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok; - phy_info->remote_rx = ((phy_data & SR_1000T_REMOTE_RX_STATUS) >> - SR_1000T_REMOTE_RX_STATUS_SHIFT) ? - e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok; - - /* Get cable length */ - ret_val = e1000_get_cable_length(hw, &min_length, &max_length); - if (ret_val) - return ret_val; - - /* Translate to old method */ - average = (max_length + min_length) / 2; - - if (average <= e1000_igp_cable_length_50) - phy_info->cable_length = e1000_cable_length_50; - else if (average <= e1000_igp_cable_length_80) - phy_info->cable_length = e1000_cable_length_50_80; - else if (average <= e1000_igp_cable_length_110) - phy_info->cable_length = e1000_cable_length_80_110; - else if (average <= e1000_igp_cable_length_140) - phy_info->cable_length = e1000_cable_length_110_140; - else - phy_info->cable_length = e1000_cable_length_140; - } - - return E1000_SUCCESS; -} + s32 ret_val; + u16 phy_data, min_length, max_length, average; + e1000_rev_polarity polarity; + + DEBUGFUNC("e1000_phy_igp_get_info"); + + /* The downshift status is checked only once, after link is established, + * and it stored in the hw->speed_downgraded parameter. */ + phy_info->downshift = (e1000_downshift) hw->speed_downgraded; + + /* IGP01E1000 does not need to support it. */ + phy_info->extended_10bt_distance = e1000_10bt_ext_dist_enable_normal; + + /* IGP01E1000 always correct polarity reversal */ + phy_info->polarity_correction = e1000_polarity_reversal_enabled; + + /* Check polarity status */ + ret_val = e1000_check_polarity(hw, &polarity); + if (ret_val) + return ret_val; + + phy_info->cable_polarity = polarity; + + ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_STATUS, &phy_data); + if (ret_val) + return ret_val; + + phy_info->mdix_mode = + (e1000_auto_x_mode) ((phy_data & IGP01E1000_PSSR_MDIX) >> + IGP01E1000_PSSR_MDIX_SHIFT); + + if ((phy_data & IGP01E1000_PSSR_SPEED_MASK) == + IGP01E1000_PSSR_SPEED_1000MBPS) { + /* Local/Remote Receiver Information are only valid at 1000 Mbps */ + ret_val = e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_data); + if (ret_val) + return ret_val; + + phy_info->local_rx = ((phy_data & SR_1000T_LOCAL_RX_STATUS) >> + SR_1000T_LOCAL_RX_STATUS_SHIFT) ? + e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok; + phy_info->remote_rx = ((phy_data & SR_1000T_REMOTE_RX_STATUS) >> + SR_1000T_REMOTE_RX_STATUS_SHIFT) ? + e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok; + + /* Get cable length */ + ret_val = e1000_get_cable_length(hw, &min_length, &max_length); + if (ret_val) + return ret_val; + + /* Translate to old method */ + average = (max_length + min_length) / 2; + + if (average <= e1000_igp_cable_length_50) + phy_info->cable_length = e1000_cable_length_50; + else if (average <= e1000_igp_cable_length_80) + phy_info->cable_length = e1000_cable_length_50_80; + else if (average <= e1000_igp_cable_length_110) + phy_info->cable_length = e1000_cable_length_80_110; + else if (average <= e1000_igp_cable_length_140) + phy_info->cable_length = e1000_cable_length_110_140; + else + phy_info->cable_length = e1000_cable_length_140; + } -/****************************************************************************** -* Get PHY information from various PHY registers for ife PHY only. -* -* hw - Struct containing variables accessed by shared code -* phy_info - PHY information structure -******************************************************************************/ -static s32 e1000_phy_ife_get_info(struct e1000_hw *hw, - struct e1000_phy_info *phy_info) -{ - s32 ret_val; - u16 phy_data; - e1000_rev_polarity polarity; - - DEBUGFUNC("e1000_phy_ife_get_info"); - - phy_info->downshift = (e1000_downshift)hw->speed_downgraded; - phy_info->extended_10bt_distance = e1000_10bt_ext_dist_enable_normal; - - ret_val = e1000_read_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL, &phy_data); - if (ret_val) - return ret_val; - phy_info->polarity_correction = - ((phy_data & IFE_PSC_AUTO_POLARITY_DISABLE) >> - IFE_PSC_AUTO_POLARITY_DISABLE_SHIFT) ? - e1000_polarity_reversal_disabled : e1000_polarity_reversal_enabled; - - if (phy_info->polarity_correction == e1000_polarity_reversal_enabled) { - ret_val = e1000_check_polarity(hw, &polarity); - if (ret_val) - return ret_val; - } else { - /* Polarity is forced. */ - polarity = ((phy_data & IFE_PSC_FORCE_POLARITY) >> - IFE_PSC_FORCE_POLARITY_SHIFT) ? - e1000_rev_polarity_reversed : e1000_rev_polarity_normal; - } - phy_info->cable_polarity = polarity; - - ret_val = e1000_read_phy_reg(hw, IFE_PHY_MDIX_CONTROL, &phy_data); - if (ret_val) - return ret_val; - - phy_info->mdix_mode = (e1000_auto_x_mode) - ((phy_data & (IFE_PMC_AUTO_MDIX | IFE_PMC_FORCE_MDIX)) >> - IFE_PMC_MDIX_MODE_SHIFT); - - return E1000_SUCCESS; + return E1000_SUCCESS; } -/****************************************************************************** -* Get PHY information from various PHY registers fot m88 PHY only. -* -* hw - Struct containing variables accessed by shared code -* phy_info - PHY information structure -******************************************************************************/ +/** + * e1000_phy_m88_get_info - get m88 specific registers + * @hw: Struct containing variables accessed by shared code + * @phy_info: PHY information structure + * + * Get PHY information from various PHY registers for m88 PHY only. + */ static s32 e1000_phy_m88_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info) { - s32 ret_val; - u16 phy_data; - e1000_rev_polarity polarity; - - DEBUGFUNC("e1000_phy_m88_get_info"); - - /* The downshift status is checked only once, after link is established, - * and it stored in the hw->speed_downgraded parameter. */ - phy_info->downshift = (e1000_downshift)hw->speed_downgraded; - - ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); - if (ret_val) - return ret_val; - - phy_info->extended_10bt_distance = - ((phy_data & M88E1000_PSCR_10BT_EXT_DIST_ENABLE) >> - M88E1000_PSCR_10BT_EXT_DIST_ENABLE_SHIFT) ? - e1000_10bt_ext_dist_enable_lower : e1000_10bt_ext_dist_enable_normal; - - phy_info->polarity_correction = - ((phy_data & M88E1000_PSCR_POLARITY_REVERSAL) >> - M88E1000_PSCR_POLARITY_REVERSAL_SHIFT) ? - e1000_polarity_reversal_disabled : e1000_polarity_reversal_enabled; - - /* Check polarity status */ - ret_val = e1000_check_polarity(hw, &polarity); - if (ret_val) - return ret_val; - phy_info->cable_polarity = polarity; - - ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data); - if (ret_val) - return ret_val; - - phy_info->mdix_mode = (e1000_auto_x_mode)((phy_data & M88E1000_PSSR_MDIX) >> - M88E1000_PSSR_MDIX_SHIFT); - - if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS) { - /* Cable Length Estimation and Local/Remote Receiver Information - * are only valid at 1000 Mbps. - */ - if (hw->phy_type != e1000_phy_gg82563) { - phy_info->cable_length = (e1000_cable_length)((phy_data & M88E1000_PSSR_CABLE_LENGTH) >> - M88E1000_PSSR_CABLE_LENGTH_SHIFT); - } else { - ret_val = e1000_read_phy_reg(hw, GG82563_PHY_DSP_DISTANCE, - &phy_data); - if (ret_val) - return ret_val; - - phy_info->cable_length = (e1000_cable_length)(phy_data & GG82563_DSPD_CABLE_LENGTH); - } - - ret_val = e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_data); - if (ret_val) - return ret_val; - - phy_info->local_rx = ((phy_data & SR_1000T_LOCAL_RX_STATUS) >> - SR_1000T_LOCAL_RX_STATUS_SHIFT) ? - e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok; - phy_info->remote_rx = ((phy_data & SR_1000T_REMOTE_RX_STATUS) >> - SR_1000T_REMOTE_RX_STATUS_SHIFT) ? - e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok; - - } - - return E1000_SUCCESS; + s32 ret_val; + u16 phy_data; + e1000_rev_polarity polarity; + + DEBUGFUNC("e1000_phy_m88_get_info"); + + /* The downshift status is checked only once, after link is established, + * and it stored in the hw->speed_downgraded parameter. */ + phy_info->downshift = (e1000_downshift) hw->speed_downgraded; + + ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); + if (ret_val) + return ret_val; + + phy_info->extended_10bt_distance = + ((phy_data & M88E1000_PSCR_10BT_EXT_DIST_ENABLE) >> + M88E1000_PSCR_10BT_EXT_DIST_ENABLE_SHIFT) ? + e1000_10bt_ext_dist_enable_lower : + e1000_10bt_ext_dist_enable_normal; + + phy_info->polarity_correction = + ((phy_data & M88E1000_PSCR_POLARITY_REVERSAL) >> + M88E1000_PSCR_POLARITY_REVERSAL_SHIFT) ? + e1000_polarity_reversal_disabled : e1000_polarity_reversal_enabled; + + /* Check polarity status */ + ret_val = e1000_check_polarity(hw, &polarity); + if (ret_val) + return ret_val; + phy_info->cable_polarity = polarity; + + ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data); + if (ret_val) + return ret_val; + + phy_info->mdix_mode = + (e1000_auto_x_mode) ((phy_data & M88E1000_PSSR_MDIX) >> + M88E1000_PSSR_MDIX_SHIFT); + + if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS) { + /* Cable Length Estimation and Local/Remote Receiver Information + * are only valid at 1000 Mbps. + */ + phy_info->cable_length = + (e1000_cable_length) ((phy_data & + M88E1000_PSSR_CABLE_LENGTH) >> + M88E1000_PSSR_CABLE_LENGTH_SHIFT); + + ret_val = e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_data); + if (ret_val) + return ret_val; + + phy_info->local_rx = ((phy_data & SR_1000T_LOCAL_RX_STATUS) >> + SR_1000T_LOCAL_RX_STATUS_SHIFT) ? + e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok; + phy_info->remote_rx = ((phy_data & SR_1000T_REMOTE_RX_STATUS) >> + SR_1000T_REMOTE_RX_STATUS_SHIFT) ? + e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok; + + } + + return E1000_SUCCESS; } -/****************************************************************************** -* Get PHY information from various PHY registers -* -* hw - Struct containing variables accessed by shared code -* phy_info - PHY information structure -******************************************************************************/ +/** + * e1000_phy_get_info - request phy info + * @hw: Struct containing variables accessed by shared code + * @phy_info: PHY information structure + * + * Get PHY information from various PHY registers + */ s32 e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info) { - s32 ret_val; - u16 phy_data; - - DEBUGFUNC("e1000_phy_get_info"); - - phy_info->cable_length = e1000_cable_length_undefined; - phy_info->extended_10bt_distance = e1000_10bt_ext_dist_enable_undefined; - phy_info->cable_polarity = e1000_rev_polarity_undefined; - phy_info->downshift = e1000_downshift_undefined; - phy_info->polarity_correction = e1000_polarity_reversal_undefined; - phy_info->mdix_mode = e1000_auto_x_mode_undefined; - phy_info->local_rx = e1000_1000t_rx_status_undefined; - phy_info->remote_rx = e1000_1000t_rx_status_undefined; - - if (hw->media_type != e1000_media_type_copper) { - DEBUGOUT("PHY info is only valid for copper media\n"); - return -E1000_ERR_CONFIG; - } - - ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data); - if (ret_val) - return ret_val; - - ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data); - if (ret_val) - return ret_val; - - if ((phy_data & MII_SR_LINK_STATUS) != MII_SR_LINK_STATUS) { - DEBUGOUT("PHY info is only valid if link is up\n"); - return -E1000_ERR_CONFIG; - } - - if (hw->phy_type == e1000_phy_igp || - hw->phy_type == e1000_phy_igp_3 || - hw->phy_type == e1000_phy_igp_2) - return e1000_phy_igp_get_info(hw, phy_info); - else if (hw->phy_type == e1000_phy_ife) - return e1000_phy_ife_get_info(hw, phy_info); - else - return e1000_phy_m88_get_info(hw, phy_info); + s32 ret_val; + u16 phy_data; + + DEBUGFUNC("e1000_phy_get_info"); + + phy_info->cable_length = e1000_cable_length_undefined; + phy_info->extended_10bt_distance = e1000_10bt_ext_dist_enable_undefined; + phy_info->cable_polarity = e1000_rev_polarity_undefined; + phy_info->downshift = e1000_downshift_undefined; + phy_info->polarity_correction = e1000_polarity_reversal_undefined; + phy_info->mdix_mode = e1000_auto_x_mode_undefined; + phy_info->local_rx = e1000_1000t_rx_status_undefined; + phy_info->remote_rx = e1000_1000t_rx_status_undefined; + + if (hw->media_type != e1000_media_type_copper) { + DEBUGOUT("PHY info is only valid for copper media\n"); + return -E1000_ERR_CONFIG; + } + + ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data); + if (ret_val) + return ret_val; + + ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data); + if (ret_val) + return ret_val; + + if ((phy_data & MII_SR_LINK_STATUS) != MII_SR_LINK_STATUS) { + DEBUGOUT("PHY info is only valid if link is up\n"); + return -E1000_ERR_CONFIG; + } + + if (hw->phy_type == e1000_phy_igp) + return e1000_phy_igp_get_info(hw, phy_info); + else + return e1000_phy_m88_get_info(hw, phy_info); } s32 e1000_validate_mdi_setting(struct e1000_hw *hw) { - DEBUGFUNC("e1000_validate_mdi_settings"); - - if (!hw->autoneg && (hw->mdix == 0 || hw->mdix == 3)) { - DEBUGOUT("Invalid MDI setting detected\n"); - hw->mdix = 1; - return -E1000_ERR_CONFIG; - } - return E1000_SUCCESS; -} + DEBUGFUNC("e1000_validate_mdi_settings"); + if (!hw->autoneg && (hw->mdix == 0 || hw->mdix == 3)) { + DEBUGOUT("Invalid MDI setting detected\n"); + hw->mdix = 1; + return -E1000_ERR_CONFIG; + } + return E1000_SUCCESS; +} -/****************************************************************************** - * Sets up eeprom variables in the hw struct. Must be called after mac_type - * is configured. Additionally, if this is ICH8, the flash controller GbE - * registers must be mapped, or this will crash. +/** + * e1000_init_eeprom_params - initialize sw eeprom vars + * @hw: Struct containing variables accessed by shared code * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ + * Sets up eeprom variables in the hw struct. Must be called after mac_type + * is configured. + */ s32 e1000_init_eeprom_params(struct e1000_hw *hw) { - struct e1000_eeprom_info *eeprom = &hw->eeprom; - u32 eecd = er32(EECD); - s32 ret_val = E1000_SUCCESS; - u16 eeprom_size; - - DEBUGFUNC("e1000_init_eeprom_params"); - - switch (hw->mac_type) { - case e1000_82542_rev2_0: - case e1000_82542_rev2_1: - case e1000_82543: - case e1000_82544: - eeprom->type = e1000_eeprom_microwire; - eeprom->word_size = 64; - eeprom->opcode_bits = 3; - eeprom->address_bits = 6; - eeprom->delay_usec = 50; - eeprom->use_eerd = false; - eeprom->use_eewr = false; - break; - case e1000_82540: - case e1000_82545: - case e1000_82545_rev_3: - case e1000_82546: - case e1000_82546_rev_3: - eeprom->type = e1000_eeprom_microwire; - eeprom->opcode_bits = 3; - eeprom->delay_usec = 50; - if (eecd & E1000_EECD_SIZE) { - eeprom->word_size = 256; - eeprom->address_bits = 8; - } else { - eeprom->word_size = 64; - eeprom->address_bits = 6; - } - eeprom->use_eerd = false; - eeprom->use_eewr = false; - break; - case e1000_82541: - case e1000_82541_rev_2: - case e1000_82547: - case e1000_82547_rev_2: - if (eecd & E1000_EECD_TYPE) { - eeprom->type = e1000_eeprom_spi; - eeprom->opcode_bits = 8; - eeprom->delay_usec = 1; - if (eecd & E1000_EECD_ADDR_BITS) { - eeprom->page_size = 32; - eeprom->address_bits = 16; - } else { - eeprom->page_size = 8; - eeprom->address_bits = 8; - } - } else { - eeprom->type = e1000_eeprom_microwire; - eeprom->opcode_bits = 3; - eeprom->delay_usec = 50; - if (eecd & E1000_EECD_ADDR_BITS) { - eeprom->word_size = 256; - eeprom->address_bits = 8; - } else { - eeprom->word_size = 64; - eeprom->address_bits = 6; - } - } - eeprom->use_eerd = false; - eeprom->use_eewr = false; - break; - case e1000_82571: - case e1000_82572: - eeprom->type = e1000_eeprom_spi; - eeprom->opcode_bits = 8; - eeprom->delay_usec = 1; - if (eecd & E1000_EECD_ADDR_BITS) { - eeprom->page_size = 32; - eeprom->address_bits = 16; - } else { - eeprom->page_size = 8; - eeprom->address_bits = 8; - } - eeprom->use_eerd = false; - eeprom->use_eewr = false; - break; - case e1000_82573: - eeprom->type = e1000_eeprom_spi; - eeprom->opcode_bits = 8; - eeprom->delay_usec = 1; - if (eecd & E1000_EECD_ADDR_BITS) { - eeprom->page_size = 32; - eeprom->address_bits = 16; - } else { - eeprom->page_size = 8; - eeprom->address_bits = 8; - } - eeprom->use_eerd = true; - eeprom->use_eewr = true; - if (!e1000_is_onboard_nvm_eeprom(hw)) { - eeprom->type = e1000_eeprom_flash; - eeprom->word_size = 2048; - - /* Ensure that the Autonomous FLASH update bit is cleared due to - * Flash update issue on parts which use a FLASH for NVM. */ - eecd &= ~E1000_EECD_AUPDEN; - ew32(EECD, eecd); - } - break; - case e1000_80003es2lan: - eeprom->type = e1000_eeprom_spi; - eeprom->opcode_bits = 8; - eeprom->delay_usec = 1; - if (eecd & E1000_EECD_ADDR_BITS) { - eeprom->page_size = 32; - eeprom->address_bits = 16; - } else { - eeprom->page_size = 8; - eeprom->address_bits = 8; - } - eeprom->use_eerd = true; - eeprom->use_eewr = false; - break; - case e1000_ich8lan: - { - s32 i = 0; - u32 flash_size = E1000_READ_ICH_FLASH_REG(hw, ICH_FLASH_GFPREG); - - eeprom->type = e1000_eeprom_ich8; - eeprom->use_eerd = false; - eeprom->use_eewr = false; - eeprom->word_size = E1000_SHADOW_RAM_WORDS; - - /* Zero the shadow RAM structure. But don't load it from NVM - * so as to save time for driver init */ - if (hw->eeprom_shadow_ram != NULL) { - for (i = 0; i < E1000_SHADOW_RAM_WORDS; i++) { - hw->eeprom_shadow_ram[i].modified = false; - hw->eeprom_shadow_ram[i].eeprom_word = 0xFFFF; - } - } - - hw->flash_base_addr = (flash_size & ICH_GFPREG_BASE_MASK) * - ICH_FLASH_SECTOR_SIZE; - - hw->flash_bank_size = ((flash_size >> 16) & ICH_GFPREG_BASE_MASK) + 1; - hw->flash_bank_size -= (flash_size & ICH_GFPREG_BASE_MASK); - - hw->flash_bank_size *= ICH_FLASH_SECTOR_SIZE; - - hw->flash_bank_size /= 2 * sizeof(u16); - - break; - } - default: - break; - } - - if (eeprom->type == e1000_eeprom_spi) { - /* eeprom_size will be an enum [0..8] that maps to eeprom sizes 128B to - * 32KB (incremented by powers of 2). - */ - if (hw->mac_type <= e1000_82547_rev_2) { - /* Set to default value for initial eeprom read. */ - eeprom->word_size = 64; - ret_val = e1000_read_eeprom(hw, EEPROM_CFG, 1, &eeprom_size); - if (ret_val) - return ret_val; - eeprom_size = (eeprom_size & EEPROM_SIZE_MASK) >> EEPROM_SIZE_SHIFT; - /* 256B eeprom size was not supported in earlier hardware, so we - * bump eeprom_size up one to ensure that "1" (which maps to 256B) - * is never the result used in the shifting logic below. */ - if (eeprom_size) - eeprom_size++; - } else { - eeprom_size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >> - E1000_EECD_SIZE_EX_SHIFT); - } - - eeprom->word_size = 1 << (eeprom_size + EEPROM_WORD_SIZE_SHIFT); - } - return ret_val; + struct e1000_eeprom_info *eeprom = &hw->eeprom; + u32 eecd = er32(EECD); + s32 ret_val = E1000_SUCCESS; + u16 eeprom_size; + + DEBUGFUNC("e1000_init_eeprom_params"); + + switch (hw->mac_type) { + case e1000_82542_rev2_0: + case e1000_82542_rev2_1: + case e1000_82543: + case e1000_82544: + eeprom->type = e1000_eeprom_microwire; + eeprom->word_size = 64; + eeprom->opcode_bits = 3; + eeprom->address_bits = 6; + eeprom->delay_usec = 50; + break; + case e1000_82540: + case e1000_82545: + case e1000_82545_rev_3: + case e1000_82546: + case e1000_82546_rev_3: + eeprom->type = e1000_eeprom_microwire; + eeprom->opcode_bits = 3; + eeprom->delay_usec = 50; + if (eecd & E1000_EECD_SIZE) { + eeprom->word_size = 256; + eeprom->address_bits = 8; + } else { + eeprom->word_size = 64; + eeprom->address_bits = 6; + } + break; + case e1000_82541: + case e1000_82541_rev_2: + case e1000_82547: + case e1000_82547_rev_2: + if (eecd & E1000_EECD_TYPE) { + eeprom->type = e1000_eeprom_spi; + eeprom->opcode_bits = 8; + eeprom->delay_usec = 1; + if (eecd & E1000_EECD_ADDR_BITS) { + eeprom->page_size = 32; + eeprom->address_bits = 16; + } else { + eeprom->page_size = 8; + eeprom->address_bits = 8; + } + } else { + eeprom->type = e1000_eeprom_microwire; + eeprom->opcode_bits = 3; + eeprom->delay_usec = 50; + if (eecd & E1000_EECD_ADDR_BITS) { + eeprom->word_size = 256; + eeprom->address_bits = 8; + } else { + eeprom->word_size = 64; + eeprom->address_bits = 6; + } + } + break; + default: + break; + } + + if (eeprom->type == e1000_eeprom_spi) { + /* eeprom_size will be an enum [0..8] that maps to eeprom sizes 128B to + * 32KB (incremented by powers of 2). + */ + /* Set to default value for initial eeprom read. */ + eeprom->word_size = 64; + ret_val = e1000_read_eeprom(hw, EEPROM_CFG, 1, &eeprom_size); + if (ret_val) + return ret_val; + eeprom_size = + (eeprom_size & EEPROM_SIZE_MASK) >> EEPROM_SIZE_SHIFT; + /* 256B eeprom size was not supported in earlier hardware, so we + * bump eeprom_size up one to ensure that "1" (which maps to 256B) + * is never the result used in the shifting logic below. */ + if (eeprom_size) + eeprom_size++; + + eeprom->word_size = 1 << (eeprom_size + EEPROM_WORD_SIZE_SHIFT); + } + return ret_val; } -/****************************************************************************** - * Raises the EEPROM's clock input. - * - * hw - Struct containing variables accessed by shared code - * eecd - EECD's current value - *****************************************************************************/ +/** + * e1000_raise_ee_clk - Raises the EEPROM's clock input. + * @hw: Struct containing variables accessed by shared code + * @eecd: EECD's current value + */ static void e1000_raise_ee_clk(struct e1000_hw *hw, u32 *eecd) { - /* Raise the clock input to the EEPROM (by setting the SK bit), and then - * wait <delay> microseconds. - */ - *eecd = *eecd | E1000_EECD_SK; - ew32(EECD, *eecd); - E1000_WRITE_FLUSH(); - udelay(hw->eeprom.delay_usec); + /* Raise the clock input to the EEPROM (by setting the SK bit), and then + * wait <delay> microseconds. + */ + *eecd = *eecd | E1000_EECD_SK; + ew32(EECD, *eecd); + E1000_WRITE_FLUSH(); + udelay(hw->eeprom.delay_usec); } -/****************************************************************************** - * Lowers the EEPROM's clock input. - * - * hw - Struct containing variables accessed by shared code - * eecd - EECD's current value - *****************************************************************************/ +/** + * e1000_lower_ee_clk - Lowers the EEPROM's clock input. + * @hw: Struct containing variables accessed by shared code + * @eecd: EECD's current value + */ static void e1000_lower_ee_clk(struct e1000_hw *hw, u32 *eecd) { - /* Lower the clock input to the EEPROM (by clearing the SK bit), and then - * wait 50 microseconds. - */ - *eecd = *eecd & ~E1000_EECD_SK; - ew32(EECD, *eecd); - E1000_WRITE_FLUSH(); - udelay(hw->eeprom.delay_usec); + /* Lower the clock input to the EEPROM (by clearing the SK bit), and then + * wait 50 microseconds. + */ + *eecd = *eecd & ~E1000_EECD_SK; + ew32(EECD, *eecd); + E1000_WRITE_FLUSH(); + udelay(hw->eeprom.delay_usec); } -/****************************************************************************** - * Shift data bits out to the EEPROM. - * - * hw - Struct containing variables accessed by shared code - * data - data to send to the EEPROM - * count - number of bits to shift out - *****************************************************************************/ +/** + * e1000_shift_out_ee_bits - Shift data bits out to the EEPROM. + * @hw: Struct containing variables accessed by shared code + * @data: data to send to the EEPROM + * @count: number of bits to shift out + */ static void e1000_shift_out_ee_bits(struct e1000_hw *hw, u16 data, u16 count) { - struct e1000_eeprom_info *eeprom = &hw->eeprom; - u32 eecd; - u32 mask; - - /* We need to shift "count" bits out to the EEPROM. So, value in the - * "data" parameter will be shifted out to the EEPROM one bit at a time. - * In order to do this, "data" must be broken down into bits. - */ - mask = 0x01 << (count - 1); - eecd = er32(EECD); - if (eeprom->type == e1000_eeprom_microwire) { - eecd &= ~E1000_EECD_DO; - } else if (eeprom->type == e1000_eeprom_spi) { - eecd |= E1000_EECD_DO; - } - do { - /* A "1" is shifted out to the EEPROM by setting bit "DI" to a "1", - * and then raising and then lowering the clock (the SK bit controls - * the clock input to the EEPROM). A "0" is shifted out to the EEPROM - * by setting "DI" to "0" and then raising and then lowering the clock. - */ - eecd &= ~E1000_EECD_DI; - - if (data & mask) - eecd |= E1000_EECD_DI; - - ew32(EECD, eecd); - E1000_WRITE_FLUSH(); - - udelay(eeprom->delay_usec); - - e1000_raise_ee_clk(hw, &eecd); - e1000_lower_ee_clk(hw, &eecd); - - mask = mask >> 1; - - } while (mask); - - /* We leave the "DI" bit set to "0" when we leave this routine. */ - eecd &= ~E1000_EECD_DI; - ew32(EECD, eecd); + struct e1000_eeprom_info *eeprom = &hw->eeprom; + u32 eecd; + u32 mask; + + /* We need to shift "count" bits out to the EEPROM. So, value in the + * "data" parameter will be shifted out to the EEPROM one bit at a time. + * In order to do this, "data" must be broken down into bits. + */ + mask = 0x01 << (count - 1); + eecd = er32(EECD); + if (eeprom->type == e1000_eeprom_microwire) { + eecd &= ~E1000_EECD_DO; + } else if (eeprom->type == e1000_eeprom_spi) { + eecd |= E1000_EECD_DO; + } + do { + /* A "1" is shifted out to the EEPROM by setting bit "DI" to a "1", + * and then raising and then lowering the clock (the SK bit controls + * the clock input to the EEPROM). A "0" is shifted out to the EEPROM + * by setting "DI" to "0" and then raising and then lowering the clock. + */ + eecd &= ~E1000_EECD_DI; + + if (data & mask) + eecd |= E1000_EECD_DI; + + ew32(EECD, eecd); + E1000_WRITE_FLUSH(); + + udelay(eeprom->delay_usec); + + e1000_raise_ee_clk(hw, &eecd); + e1000_lower_ee_clk(hw, &eecd); + + mask = mask >> 1; + + } while (mask); + + /* We leave the "DI" bit set to "0" when we leave this routine. */ + eecd &= ~E1000_EECD_DI; + ew32(EECD, eecd); } -/****************************************************************************** - * Shift data bits in from the EEPROM - * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ +/** + * e1000_shift_in_ee_bits - Shift data bits in from the EEPROM + * @hw: Struct containing variables accessed by shared code + * @count: number of bits to shift in + */ static u16 e1000_shift_in_ee_bits(struct e1000_hw *hw, u16 count) { - u32 eecd; - u32 i; - u16 data; + u32 eecd; + u32 i; + u16 data; - /* In order to read a register from the EEPROM, we need to shift 'count' - * bits in from the EEPROM. Bits are "shifted in" by raising the clock - * input to the EEPROM (setting the SK bit), and then reading the value of - * the "DO" bit. During this "shifting in" process the "DI" bit should - * always be clear. - */ + /* In order to read a register from the EEPROM, we need to shift 'count' + * bits in from the EEPROM. Bits are "shifted in" by raising the clock + * input to the EEPROM (setting the SK bit), and then reading the value of + * the "DO" bit. During this "shifting in" process the "DI" bit should + * always be clear. + */ - eecd = er32(EECD); + eecd = er32(EECD); - eecd &= ~(E1000_EECD_DO | E1000_EECD_DI); - data = 0; + eecd &= ~(E1000_EECD_DO | E1000_EECD_DI); + data = 0; - for (i = 0; i < count; i++) { - data = data << 1; - e1000_raise_ee_clk(hw, &eecd); + for (i = 0; i < count; i++) { + data = data << 1; + e1000_raise_ee_clk(hw, &eecd); - eecd = er32(EECD); + eecd = er32(EECD); - eecd &= ~(E1000_EECD_DI); - if (eecd & E1000_EECD_DO) - data |= 1; + eecd &= ~(E1000_EECD_DI); + if (eecd & E1000_EECD_DO) + data |= 1; - e1000_lower_ee_clk(hw, &eecd); - } + e1000_lower_ee_clk(hw, &eecd); + } - return data; + return data; } -/****************************************************************************** - * Prepares EEPROM for access - * - * hw - Struct containing variables accessed by shared code +/** + * e1000_acquire_eeprom - Prepares EEPROM for access + * @hw: Struct containing variables accessed by shared code * * Lowers EEPROM clock. Clears input pin. Sets the chip select pin. This * function should be called before issuing a command to the EEPROM. - *****************************************************************************/ + */ static s32 e1000_acquire_eeprom(struct e1000_hw *hw) { - struct e1000_eeprom_info *eeprom = &hw->eeprom; - u32 eecd, i=0; - - DEBUGFUNC("e1000_acquire_eeprom"); - - if (e1000_swfw_sync_acquire(hw, E1000_SWFW_EEP_SM)) - return -E1000_ERR_SWFW_SYNC; - eecd = er32(EECD); - - if (hw->mac_type != e1000_82573) { - /* Request EEPROM Access */ - if (hw->mac_type > e1000_82544) { - eecd |= E1000_EECD_REQ; - ew32(EECD, eecd); - eecd = er32(EECD); - while ((!(eecd & E1000_EECD_GNT)) && - (i < E1000_EEPROM_GRANT_ATTEMPTS)) { - i++; - udelay(5); - eecd = er32(EECD); - } - if (!(eecd & E1000_EECD_GNT)) { - eecd &= ~E1000_EECD_REQ; - ew32(EECD, eecd); - DEBUGOUT("Could not acquire EEPROM grant\n"); - e1000_swfw_sync_release(hw, E1000_SWFW_EEP_SM); - return -E1000_ERR_EEPROM; - } - } - } - - /* Setup EEPROM for Read/Write */ - - if (eeprom->type == e1000_eeprom_microwire) { - /* Clear SK and DI */ - eecd &= ~(E1000_EECD_DI | E1000_EECD_SK); - ew32(EECD, eecd); - - /* Set CS */ - eecd |= E1000_EECD_CS; - ew32(EECD, eecd); - } else if (eeprom->type == e1000_eeprom_spi) { - /* Clear SK and CS */ - eecd &= ~(E1000_EECD_CS | E1000_EECD_SK); - ew32(EECD, eecd); - udelay(1); - } - - return E1000_SUCCESS; + struct e1000_eeprom_info *eeprom = &hw->eeprom; + u32 eecd, i = 0; + + DEBUGFUNC("e1000_acquire_eeprom"); + + eecd = er32(EECD); + + /* Request EEPROM Access */ + if (hw->mac_type > e1000_82544) { + eecd |= E1000_EECD_REQ; + ew32(EECD, eecd); + eecd = er32(EECD); + while ((!(eecd & E1000_EECD_GNT)) && + (i < E1000_EEPROM_GRANT_ATTEMPTS)) { + i++; + udelay(5); + eecd = er32(EECD); + } + if (!(eecd & E1000_EECD_GNT)) { + eecd &= ~E1000_EECD_REQ; + ew32(EECD, eecd); + DEBUGOUT("Could not acquire EEPROM grant\n"); + return -E1000_ERR_EEPROM; + } + } + + /* Setup EEPROM for Read/Write */ + + if (eeprom->type == e1000_eeprom_microwire) { + /* Clear SK and DI */ + eecd &= ~(E1000_EECD_DI | E1000_EECD_SK); + ew32(EECD, eecd); + + /* Set CS */ + eecd |= E1000_EECD_CS; + ew32(EECD, eecd); + } else if (eeprom->type == e1000_eeprom_spi) { + /* Clear SK and CS */ + eecd &= ~(E1000_EECD_CS | E1000_EECD_SK); + ew32(EECD, eecd); + udelay(1); + } + + return E1000_SUCCESS; } -/****************************************************************************** - * Returns EEPROM to a "standby" state - * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ +/** + * e1000_standby_eeprom - Returns EEPROM to a "standby" state + * @hw: Struct containing variables accessed by shared code + */ static void e1000_standby_eeprom(struct e1000_hw *hw) { - struct e1000_eeprom_info *eeprom = &hw->eeprom; - u32 eecd; - - eecd = er32(EECD); - - if (eeprom->type == e1000_eeprom_microwire) { - eecd &= ~(E1000_EECD_CS | E1000_EECD_SK); - ew32(EECD, eecd); - E1000_WRITE_FLUSH(); - udelay(eeprom->delay_usec); - - /* Clock high */ - eecd |= E1000_EECD_SK; - ew32(EECD, eecd); - E1000_WRITE_FLUSH(); - udelay(eeprom->delay_usec); - - /* Select EEPROM */ - eecd |= E1000_EECD_CS; - ew32(EECD, eecd); - E1000_WRITE_FLUSH(); - udelay(eeprom->delay_usec); - - /* Clock low */ - eecd &= ~E1000_EECD_SK; - ew32(EECD, eecd); - E1000_WRITE_FLUSH(); - udelay(eeprom->delay_usec); - } else if (eeprom->type == e1000_eeprom_spi) { - /* Toggle CS to flush commands */ - eecd |= E1000_EECD_CS; - ew32(EECD, eecd); - E1000_WRITE_FLUSH(); - udelay(eeprom->delay_usec); - eecd &= ~E1000_EECD_CS; - ew32(EECD, eecd); - E1000_WRITE_FLUSH(); - udelay(eeprom->delay_usec); - } + struct e1000_eeprom_info *eeprom = &hw->eeprom; + u32 eecd; + + eecd = er32(EECD); + + if (eeprom->type == e1000_eeprom_microwire) { + eecd &= ~(E1000_EECD_CS | E1000_EECD_SK); + ew32(EECD, eecd); + E1000_WRITE_FLUSH(); + udelay(eeprom->delay_usec); + + /* Clock high */ + eecd |= E1000_EECD_SK; + ew32(EECD, eecd); + E1000_WRITE_FLUSH(); + udelay(eeprom->delay_usec); + + /* Select EEPROM */ + eecd |= E1000_EECD_CS; + ew32(EECD, eecd); + E1000_WRITE_FLUSH(); + udelay(eeprom->delay_usec); + + /* Clock low */ + eecd &= ~E1000_EECD_SK; + ew32(EECD, eecd); + E1000_WRITE_FLUSH(); + udelay(eeprom->delay_usec); + } else if (eeprom->type == e1000_eeprom_spi) { + /* Toggle CS to flush commands */ + eecd |= E1000_EECD_CS; + ew32(EECD, eecd); + E1000_WRITE_FLUSH(); + udelay(eeprom->delay_usec); + eecd &= ~E1000_EECD_CS; + ew32(EECD, eecd); + E1000_WRITE_FLUSH(); + udelay(eeprom->delay_usec); + } } -/****************************************************************************** - * Terminates a command by inverting the EEPROM's chip select pin +/** + * e1000_release_eeprom - drop chip select + * @hw: Struct containing variables accessed by shared code * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ + * Terminates a command by inverting the EEPROM's chip select pin + */ static void e1000_release_eeprom(struct e1000_hw *hw) { - u32 eecd; - - DEBUGFUNC("e1000_release_eeprom"); + u32 eecd; - eecd = er32(EECD); + DEBUGFUNC("e1000_release_eeprom"); - if (hw->eeprom.type == e1000_eeprom_spi) { - eecd |= E1000_EECD_CS; /* Pull CS high */ - eecd &= ~E1000_EECD_SK; /* Lower SCK */ + eecd = er32(EECD); - ew32(EECD, eecd); + if (hw->eeprom.type == e1000_eeprom_spi) { + eecd |= E1000_EECD_CS; /* Pull CS high */ + eecd &= ~E1000_EECD_SK; /* Lower SCK */ - udelay(hw->eeprom.delay_usec); - } else if (hw->eeprom.type == e1000_eeprom_microwire) { - /* cleanup eeprom */ + ew32(EECD, eecd); - /* CS on Microwire is active-high */ - eecd &= ~(E1000_EECD_CS | E1000_EECD_DI); + udelay(hw->eeprom.delay_usec); + } else if (hw->eeprom.type == e1000_eeprom_microwire) { + /* cleanup eeprom */ - ew32(EECD, eecd); + /* CS on Microwire is active-high */ + eecd &= ~(E1000_EECD_CS | E1000_EECD_DI); - /* Rising edge of clock */ - eecd |= E1000_EECD_SK; - ew32(EECD, eecd); - E1000_WRITE_FLUSH(); - udelay(hw->eeprom.delay_usec); + ew32(EECD, eecd); - /* Falling edge of clock */ - eecd &= ~E1000_EECD_SK; - ew32(EECD, eecd); - E1000_WRITE_FLUSH(); - udelay(hw->eeprom.delay_usec); - } + /* Rising edge of clock */ + eecd |= E1000_EECD_SK; + ew32(EECD, eecd); + E1000_WRITE_FLUSH(); + udelay(hw->eeprom.delay_usec); - /* Stop requesting EEPROM access */ - if (hw->mac_type > e1000_82544) { - eecd &= ~E1000_EECD_REQ; - ew32(EECD, eecd); - } + /* Falling edge of clock */ + eecd &= ~E1000_EECD_SK; + ew32(EECD, eecd); + E1000_WRITE_FLUSH(); + udelay(hw->eeprom.delay_usec); + } - e1000_swfw_sync_release(hw, E1000_SWFW_EEP_SM); + /* Stop requesting EEPROM access */ + if (hw->mac_type > e1000_82544) { + eecd &= ~E1000_EECD_REQ; + ew32(EECD, eecd); + } } -/****************************************************************************** - * Reads a 16 bit word from the EEPROM. - * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ +/** + * e1000_spi_eeprom_ready - Reads a 16 bit word from the EEPROM. + * @hw: Struct containing variables accessed by shared code + */ static s32 e1000_spi_eeprom_ready(struct e1000_hw *hw) { - u16 retry_count = 0; - u8 spi_stat_reg; - - DEBUGFUNC("e1000_spi_eeprom_ready"); - - /* Read "Status Register" repeatedly until the LSB is cleared. The - * EEPROM will signal that the command has been completed by clearing - * bit 0 of the internal status register. If it's not cleared within - * 5 milliseconds, then error out. - */ - retry_count = 0; - do { - e1000_shift_out_ee_bits(hw, EEPROM_RDSR_OPCODE_SPI, - hw->eeprom.opcode_bits); - spi_stat_reg = (u8)e1000_shift_in_ee_bits(hw, 8); - if (!(spi_stat_reg & EEPROM_STATUS_RDY_SPI)) - break; - - udelay(5); - retry_count += 5; - - e1000_standby_eeprom(hw); - } while (retry_count < EEPROM_MAX_RETRY_SPI); - - /* ATMEL SPI write time could vary from 0-20mSec on 3.3V devices (and - * only 0-5mSec on 5V devices) - */ - if (retry_count >= EEPROM_MAX_RETRY_SPI) { - DEBUGOUT("SPI EEPROM Status error\n"); - return -E1000_ERR_EEPROM; - } - - return E1000_SUCCESS; -} - -/****************************************************************************** - * Reads a 16 bit word from the EEPROM. - * - * hw - Struct containing variables accessed by shared code - * offset - offset of word in the EEPROM to read - * data - word read from the EEPROM - * words - number of words to read - *****************************************************************************/ -s32 e1000_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) -{ - s32 ret; - spin_lock(&e1000_eeprom_lock); - ret = e1000_do_read_eeprom(hw, offset, words, data); - spin_unlock(&e1000_eeprom_lock); - return ret; -} - -static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) -{ - struct e1000_eeprom_info *eeprom = &hw->eeprom; - u32 i = 0; - - DEBUGFUNC("e1000_read_eeprom"); - - /* If eeprom is not yet detected, do so now */ - if (eeprom->word_size == 0) - e1000_init_eeprom_params(hw); - - /* A check for invalid values: offset too large, too many words, and not - * enough words. - */ - if ((offset >= eeprom->word_size) || (words > eeprom->word_size - offset) || - (words == 0)) { - DEBUGOUT2("\"words\" parameter out of bounds. Words = %d, size = %d\n", offset, eeprom->word_size); - return -E1000_ERR_EEPROM; - } - - /* EEPROM's that don't use EERD to read require us to bit-bang the SPI - * directly. In this case, we need to acquire the EEPROM so that - * FW or other port software does not interrupt. - */ - if (e1000_is_onboard_nvm_eeprom(hw) && !hw->eeprom.use_eerd) { - /* Prepare the EEPROM for bit-bang reading */ - if (e1000_acquire_eeprom(hw) != E1000_SUCCESS) - return -E1000_ERR_EEPROM; - } - - /* Eerd register EEPROM access requires no eeprom aquire/release */ - if (eeprom->use_eerd) - return e1000_read_eeprom_eerd(hw, offset, words, data); - - /* ICH EEPROM access is done via the ICH flash controller */ - if (eeprom->type == e1000_eeprom_ich8) - return e1000_read_eeprom_ich8(hw, offset, words, data); - - /* Set up the SPI or Microwire EEPROM for bit-bang reading. We have - * acquired the EEPROM at this point, so any returns should relase it */ - if (eeprom->type == e1000_eeprom_spi) { - u16 word_in; - u8 read_opcode = EEPROM_READ_OPCODE_SPI; - - if (e1000_spi_eeprom_ready(hw)) { - e1000_release_eeprom(hw); - return -E1000_ERR_EEPROM; - } - - e1000_standby_eeprom(hw); - - /* Some SPI eeproms use the 8th address bit embedded in the opcode */ - if ((eeprom->address_bits == 8) && (offset >= 128)) - read_opcode |= EEPROM_A8_OPCODE_SPI; - - /* Send the READ command (opcode + addr) */ - e1000_shift_out_ee_bits(hw, read_opcode, eeprom->opcode_bits); - e1000_shift_out_ee_bits(hw, (u16)(offset*2), eeprom->address_bits); - - /* Read the data. The address of the eeprom internally increments with - * each byte (spi) being read, saving on the overhead of eeprom setup - * and tear-down. The address counter will roll over if reading beyond - * the size of the eeprom, thus allowing the entire memory to be read - * starting from any offset. */ - for (i = 0; i < words; i++) { - word_in = e1000_shift_in_ee_bits(hw, 16); - data[i] = (word_in >> 8) | (word_in << 8); - } - } else if (eeprom->type == e1000_eeprom_microwire) { - for (i = 0; i < words; i++) { - /* Send the READ command (opcode + addr) */ - e1000_shift_out_ee_bits(hw, EEPROM_READ_OPCODE_MICROWIRE, - eeprom->opcode_bits); - e1000_shift_out_ee_bits(hw, (u16)(offset + i), - eeprom->address_bits); - - /* Read the data. For microwire, each word requires the overhead - * of eeprom setup and tear-down. */ - data[i] = e1000_shift_in_ee_bits(hw, 16); - e1000_standby_eeprom(hw); - } - } - - /* End this read operation */ - e1000_release_eeprom(hw); - - return E1000_SUCCESS; -} + u16 retry_count = 0; + u8 spi_stat_reg; -/****************************************************************************** - * Reads a 16 bit word from the EEPROM using the EERD register. - * - * hw - Struct containing variables accessed by shared code - * offset - offset of word in the EEPROM to read - * data - word read from the EEPROM - * words - number of words to read - *****************************************************************************/ -static s32 e1000_read_eeprom_eerd(struct e1000_hw *hw, u16 offset, u16 words, - u16 *data) -{ - u32 i, eerd = 0; - s32 error = 0; + DEBUGFUNC("e1000_spi_eeprom_ready"); - for (i = 0; i < words; i++) { - eerd = ((offset+i) << E1000_EEPROM_RW_ADDR_SHIFT) + - E1000_EEPROM_RW_REG_START; + /* Read "Status Register" repeatedly until the LSB is cleared. The + * EEPROM will signal that the command has been completed by clearing + * bit 0 of the internal status register. If it's not cleared within + * 5 milliseconds, then error out. + */ + retry_count = 0; + do { + e1000_shift_out_ee_bits(hw, EEPROM_RDSR_OPCODE_SPI, + hw->eeprom.opcode_bits); + spi_stat_reg = (u8) e1000_shift_in_ee_bits(hw, 8); + if (!(spi_stat_reg & EEPROM_STATUS_RDY_SPI)) + break; - ew32(EERD, eerd); - error = e1000_poll_eerd_eewr_done(hw, E1000_EEPROM_POLL_READ); + udelay(5); + retry_count += 5; - if (error) { - break; - } - data[i] = (er32(EERD) >> E1000_EEPROM_RW_REG_DATA); + e1000_standby_eeprom(hw); + } while (retry_count < EEPROM_MAX_RETRY_SPI); - } + /* ATMEL SPI write time could vary from 0-20mSec on 3.3V devices (and + * only 0-5mSec on 5V devices) + */ + if (retry_count >= EEPROM_MAX_RETRY_SPI) { + DEBUGOUT("SPI EEPROM Status error\n"); + return -E1000_ERR_EEPROM; + } - return error; + return E1000_SUCCESS; } -/****************************************************************************** - * Writes a 16 bit word from the EEPROM using the EEWR register. - * - * hw - Struct containing variables accessed by shared code - * offset - offset of word in the EEPROM to read - * data - word read from the EEPROM - * words - number of words to read - *****************************************************************************/ -static s32 e1000_write_eeprom_eewr(struct e1000_hw *hw, u16 offset, u16 words, - u16 *data) +/** + * e1000_read_eeprom - Reads a 16 bit word from the EEPROM. + * @hw: Struct containing variables accessed by shared code + * @offset: offset of word in the EEPROM to read + * @data: word read from the EEPROM + * @words: number of words to read + */ +s32 e1000_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) { - u32 register_value = 0; - u32 i = 0; - s32 error = 0; - - if (e1000_swfw_sync_acquire(hw, E1000_SWFW_EEP_SM)) - return -E1000_ERR_SWFW_SYNC; - - for (i = 0; i < words; i++) { - register_value = (data[i] << E1000_EEPROM_RW_REG_DATA) | - ((offset+i) << E1000_EEPROM_RW_ADDR_SHIFT) | - E1000_EEPROM_RW_REG_START; - - error = e1000_poll_eerd_eewr_done(hw, E1000_EEPROM_POLL_WRITE); - if (error) { - break; - } - - ew32(EEWR, register_value); - - error = e1000_poll_eerd_eewr_done(hw, E1000_EEPROM_POLL_WRITE); - - if (error) { - break; - } - } - - e1000_swfw_sync_release(hw, E1000_SWFW_EEP_SM); - return error; + s32 ret; + spin_lock(&e1000_eeprom_lock); + ret = e1000_do_read_eeprom(hw, offset, words, data); + spin_unlock(&e1000_eeprom_lock); + return ret; } -/****************************************************************************** - * Polls the status bit (bit 1) of the EERD to determine when the read is done. - * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ -static s32 e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int eerd) +static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, + u16 *data) { - u32 attempts = 100000; - u32 i, reg = 0; - s32 done = E1000_ERR_EEPROM; - - for (i = 0; i < attempts; i++) { - if (eerd == E1000_EEPROM_POLL_READ) - reg = er32(EERD); - else - reg = er32(EEWR); - - if (reg & E1000_EEPROM_RW_REG_DONE) { - done = E1000_SUCCESS; - break; - } - udelay(5); - } - - return done; -} + struct e1000_eeprom_info *eeprom = &hw->eeprom; + u32 i = 0; -/*************************************************************************** -* Description: Determines if the onboard NVM is FLASH or EEPROM. -* -* hw - Struct containing variables accessed by shared code -****************************************************************************/ -static bool e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw) -{ - u32 eecd = 0; + DEBUGFUNC("e1000_read_eeprom"); - DEBUGFUNC("e1000_is_onboard_nvm_eeprom"); + /* If eeprom is not yet detected, do so now */ + if (eeprom->word_size == 0) + e1000_init_eeprom_params(hw); + + /* A check for invalid values: offset too large, too many words, and not + * enough words. + */ + if ((offset >= eeprom->word_size) + || (words > eeprom->word_size - offset) || (words == 0)) { + DEBUGOUT2 + ("\"words\" parameter out of bounds. Words = %d, size = %d\n", + offset, eeprom->word_size); + return -E1000_ERR_EEPROM; + } - if (hw->mac_type == e1000_ich8lan) - return false; + /* EEPROM's that don't use EERD to read require us to bit-bang the SPI + * directly. In this case, we need to acquire the EEPROM so that + * FW or other port software does not interrupt. + */ + /* Prepare the EEPROM for bit-bang reading */ + if (e1000_acquire_eeprom(hw) != E1000_SUCCESS) + return -E1000_ERR_EEPROM; + + /* Set up the SPI or Microwire EEPROM for bit-bang reading. We have + * acquired the EEPROM at this point, so any returns should release it */ + if (eeprom->type == e1000_eeprom_spi) { + u16 word_in; + u8 read_opcode = EEPROM_READ_OPCODE_SPI; + + if (e1000_spi_eeprom_ready(hw)) { + e1000_release_eeprom(hw); + return -E1000_ERR_EEPROM; + } - if (hw->mac_type == e1000_82573) { - eecd = er32(EECD); + e1000_standby_eeprom(hw); + + /* Some SPI eeproms use the 8th address bit embedded in the opcode */ + if ((eeprom->address_bits == 8) && (offset >= 128)) + read_opcode |= EEPROM_A8_OPCODE_SPI; + + /* Send the READ command (opcode + addr) */ + e1000_shift_out_ee_bits(hw, read_opcode, eeprom->opcode_bits); + e1000_shift_out_ee_bits(hw, (u16) (offset * 2), + eeprom->address_bits); + + /* Read the data. The address of the eeprom internally increments with + * each byte (spi) being read, saving on the overhead of eeprom setup + * and tear-down. The address counter will roll over if reading beyond + * the size of the eeprom, thus allowing the entire memory to be read + * starting from any offset. */ + for (i = 0; i < words; i++) { + word_in = e1000_shift_in_ee_bits(hw, 16); + data[i] = (word_in >> 8) | (word_in << 8); + } + } else if (eeprom->type == e1000_eeprom_microwire) { + for (i = 0; i < words; i++) { + /* Send the READ command (opcode + addr) */ + e1000_shift_out_ee_bits(hw, + EEPROM_READ_OPCODE_MICROWIRE, + eeprom->opcode_bits); + e1000_shift_out_ee_bits(hw, (u16) (offset + i), + eeprom->address_bits); + + /* Read the data. For microwire, each word requires the overhead + * of eeprom setup and tear-down. */ + data[i] = e1000_shift_in_ee_bits(hw, 16); + e1000_standby_eeprom(hw); + } + } - /* Isolate bits 15 & 16 */ - eecd = ((eecd >> 15) & 0x03); + /* End this read operation */ + e1000_release_eeprom(hw); - /* If both bits are set, device is Flash type */ - if (eecd == 0x03) { - return false; - } - } - return true; + return E1000_SUCCESS; } -/****************************************************************************** - * Verifies that the EEPROM has a valid checksum - * - * hw - Struct containing variables accessed by shared code +/** + * e1000_validate_eeprom_checksum - Verifies that the EEPROM has a valid checksum + * @hw: Struct containing variables accessed by shared code * * Reads the first 64 16 bit words of the EEPROM and sums the values read. * If the the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is * valid. - *****************************************************************************/ + */ s32 e1000_validate_eeprom_checksum(struct e1000_hw *hw) { - u16 checksum = 0; - u16 i, eeprom_data; - - DEBUGFUNC("e1000_validate_eeprom_checksum"); - - if ((hw->mac_type == e1000_82573) && !e1000_is_onboard_nvm_eeprom(hw)) { - /* Check bit 4 of word 10h. If it is 0, firmware is done updating - * 10h-12h. Checksum may need to be fixed. */ - e1000_read_eeprom(hw, 0x10, 1, &eeprom_data); - if ((eeprom_data & 0x10) == 0) { - /* Read 0x23 and check bit 15. This bit is a 1 when the checksum - * has already been fixed. If the checksum is still wrong and this - * bit is a 1, we need to return bad checksum. Otherwise, we need - * to set this bit to a 1 and update the checksum. */ - e1000_read_eeprom(hw, 0x23, 1, &eeprom_data); - if ((eeprom_data & 0x8000) == 0) { - eeprom_data |= 0x8000; - e1000_write_eeprom(hw, 0x23, 1, &eeprom_data); - e1000_update_eeprom_checksum(hw); - } - } - } - - if (hw->mac_type == e1000_ich8lan) { - /* Drivers must allocate the shadow ram structure for the - * EEPROM checksum to be updated. Otherwise, this bit as well - * as the checksum must both be set correctly for this - * validation to pass. - */ - e1000_read_eeprom(hw, 0x19, 1, &eeprom_data); - if ((eeprom_data & 0x40) == 0) { - eeprom_data |= 0x40; - e1000_write_eeprom(hw, 0x19, 1, &eeprom_data); - e1000_update_eeprom_checksum(hw); - } - } - - for (i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++) { - if (e1000_read_eeprom(hw, i, 1, &eeprom_data) < 0) { - DEBUGOUT("EEPROM Read Error\n"); - return -E1000_ERR_EEPROM; - } - checksum += eeprom_data; - } - - if (checksum == (u16)EEPROM_SUM) - return E1000_SUCCESS; - else { - DEBUGOUT("EEPROM Checksum Invalid\n"); - return -E1000_ERR_EEPROM; - } + u16 checksum = 0; + u16 i, eeprom_data; + + DEBUGFUNC("e1000_validate_eeprom_checksum"); + + for (i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++) { + if (e1000_read_eeprom(hw, i, 1, &eeprom_data) < 0) { + DEBUGOUT("EEPROM Read Error\n"); + return -E1000_ERR_EEPROM; + } + checksum += eeprom_data; + } + + if (checksum == (u16) EEPROM_SUM) + return E1000_SUCCESS; + else { + DEBUGOUT("EEPROM Checksum Invalid\n"); + return -E1000_ERR_EEPROM; + } } -/****************************************************************************** - * Calculates the EEPROM checksum and writes it to the EEPROM - * - * hw - Struct containing variables accessed by shared code +/** + * e1000_update_eeprom_checksum - Calculates/writes the EEPROM checksum + * @hw: Struct containing variables accessed by shared code * * Sums the first 63 16 bit words of the EEPROM. Subtracts the sum from 0xBABA. * Writes the difference to word offset 63 of the EEPROM. - *****************************************************************************/ + */ s32 e1000_update_eeprom_checksum(struct e1000_hw *hw) { - u32 ctrl_ext; - u16 checksum = 0; - u16 i, eeprom_data; - - DEBUGFUNC("e1000_update_eeprom_checksum"); - - for (i = 0; i < EEPROM_CHECKSUM_REG; i++) { - if (e1000_read_eeprom(hw, i, 1, &eeprom_data) < 0) { - DEBUGOUT("EEPROM Read Error\n"); - return -E1000_ERR_EEPROM; - } - checksum += eeprom_data; - } - checksum = (u16)EEPROM_SUM - checksum; - if (e1000_write_eeprom(hw, EEPROM_CHECKSUM_REG, 1, &checksum) < 0) { - DEBUGOUT("EEPROM Write Error\n"); - return -E1000_ERR_EEPROM; - } else if (hw->eeprom.type == e1000_eeprom_flash) { - e1000_commit_shadow_ram(hw); - } else if (hw->eeprom.type == e1000_eeprom_ich8) { - e1000_commit_shadow_ram(hw); - /* Reload the EEPROM, or else modifications will not appear - * until after next adapter reset. */ - ctrl_ext = er32(CTRL_EXT); - ctrl_ext |= E1000_CTRL_EXT_EE_RST; - ew32(CTRL_EXT, ctrl_ext); - msleep(10); - } - return E1000_SUCCESS; + u16 checksum = 0; + u16 i, eeprom_data; + + DEBUGFUNC("e1000_update_eeprom_checksum"); + + for (i = 0; i < EEPROM_CHECKSUM_REG; i++) { + if (e1000_read_eeprom(hw, i, 1, &eeprom_data) < 0) { + DEBUGOUT("EEPROM Read Error\n"); + return -E1000_ERR_EEPROM; + } + checksum += eeprom_data; + } + checksum = (u16) EEPROM_SUM - checksum; + if (e1000_write_eeprom(hw, EEPROM_CHECKSUM_REG, 1, &checksum) < 0) { + DEBUGOUT("EEPROM Write Error\n"); + return -E1000_ERR_EEPROM; + } + return E1000_SUCCESS; } -/****************************************************************************** - * Parent function for writing words to the different EEPROM types. - * - * hw - Struct containing variables accessed by shared code - * offset - offset within the EEPROM to be written to - * words - number of words to write - * data - 16 bit word to be written to the EEPROM +/** + * e1000_write_eeprom - write words to the different EEPROM types. + * @hw: Struct containing variables accessed by shared code + * @offset: offset within the EEPROM to be written to + * @words: number of words to write + * @data: 16 bit word to be written to the EEPROM * * If e1000_update_eeprom_checksum is not called after this function, the * EEPROM will most likely contain an invalid checksum. - *****************************************************************************/ + */ s32 e1000_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) { - s32 ret; - spin_lock(&e1000_eeprom_lock); - ret = e1000_do_write_eeprom(hw, offset, words, data); - spin_unlock(&e1000_eeprom_lock); - return ret; + s32 ret; + spin_lock(&e1000_eeprom_lock); + ret = e1000_do_write_eeprom(hw, offset, words, data); + spin_unlock(&e1000_eeprom_lock); + return ret; } - -static s32 e1000_do_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) +static s32 e1000_do_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words, + u16 *data) { - struct e1000_eeprom_info *eeprom = &hw->eeprom; - s32 status = 0; - - DEBUGFUNC("e1000_write_eeprom"); - - /* If eeprom is not yet detected, do so now */ - if (eeprom->word_size == 0) - e1000_init_eeprom_params(hw); - - /* A check for invalid values: offset too large, too many words, and not - * enough words. - */ - if ((offset >= eeprom->word_size) || (words > eeprom->word_size - offset) || - (words == 0)) { - DEBUGOUT("\"words\" parameter out of bounds\n"); - return -E1000_ERR_EEPROM; - } - - /* 82573 writes only through eewr */ - if (eeprom->use_eewr) - return e1000_write_eeprom_eewr(hw, offset, words, data); - - if (eeprom->type == e1000_eeprom_ich8) - return e1000_write_eeprom_ich8(hw, offset, words, data); - - /* Prepare the EEPROM for writing */ - if (e1000_acquire_eeprom(hw) != E1000_SUCCESS) - return -E1000_ERR_EEPROM; - - if (eeprom->type == e1000_eeprom_microwire) { - status = e1000_write_eeprom_microwire(hw, offset, words, data); - } else { - status = e1000_write_eeprom_spi(hw, offset, words, data); - msleep(10); - } - - /* Done with writing */ - e1000_release_eeprom(hw); - - return status; + struct e1000_eeprom_info *eeprom = &hw->eeprom; + s32 status = 0; + + DEBUGFUNC("e1000_write_eeprom"); + + /* If eeprom is not yet detected, do so now */ + if (eeprom->word_size == 0) + e1000_init_eeprom_params(hw); + + /* A check for invalid values: offset too large, too many words, and not + * enough words. + */ + if ((offset >= eeprom->word_size) + || (words > eeprom->word_size - offset) || (words == 0)) { + DEBUGOUT("\"words\" parameter out of bounds\n"); + return -E1000_ERR_EEPROM; + } + + /* Prepare the EEPROM for writing */ + if (e1000_acquire_eeprom(hw) != E1000_SUCCESS) + return -E1000_ERR_EEPROM; + + if (eeprom->type == e1000_eeprom_microwire) { + status = e1000_write_eeprom_microwire(hw, offset, words, data); + } else { + status = e1000_write_eeprom_spi(hw, offset, words, data); + msleep(10); + } + + /* Done with writing */ + e1000_release_eeprom(hw); + + return status; } -/****************************************************************************** - * Writes a 16 bit word to a given offset in an SPI EEPROM. - * - * hw - Struct containing variables accessed by shared code - * offset - offset within the EEPROM to be written to - * words - number of words to write - * data - pointer to array of 8 bit words to be written to the EEPROM - * - *****************************************************************************/ +/** + * e1000_write_eeprom_spi - Writes a 16 bit word to a given offset in an SPI EEPROM. + * @hw: Struct containing variables accessed by shared code + * @offset: offset within the EEPROM to be written to + * @words: number of words to write + * @data: pointer to array of 8 bit words to be written to the EEPROM + */ static s32 e1000_write_eeprom_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) { - struct e1000_eeprom_info *eeprom = &hw->eeprom; - u16 widx = 0; + struct e1000_eeprom_info *eeprom = &hw->eeprom; + u16 widx = 0; - DEBUGFUNC("e1000_write_eeprom_spi"); + DEBUGFUNC("e1000_write_eeprom_spi"); - while (widx < words) { - u8 write_opcode = EEPROM_WRITE_OPCODE_SPI; + while (widx < words) { + u8 write_opcode = EEPROM_WRITE_OPCODE_SPI; - if (e1000_spi_eeprom_ready(hw)) return -E1000_ERR_EEPROM; + if (e1000_spi_eeprom_ready(hw)) + return -E1000_ERR_EEPROM; - e1000_standby_eeprom(hw); + e1000_standby_eeprom(hw); - /* Send the WRITE ENABLE command (8 bit opcode ) */ - e1000_shift_out_ee_bits(hw, EEPROM_WREN_OPCODE_SPI, - eeprom->opcode_bits); + /* Send the WRITE ENABLE command (8 bit opcode ) */ + e1000_shift_out_ee_bits(hw, EEPROM_WREN_OPCODE_SPI, + eeprom->opcode_bits); - e1000_standby_eeprom(hw); + e1000_standby_eeprom(hw); - /* Some SPI eeproms use the 8th address bit embedded in the opcode */ - if ((eeprom->address_bits == 8) && (offset >= 128)) - write_opcode |= EEPROM_A8_OPCODE_SPI; + /* Some SPI eeproms use the 8th address bit embedded in the opcode */ + if ((eeprom->address_bits == 8) && (offset >= 128)) + write_opcode |= EEPROM_A8_OPCODE_SPI; - /* Send the Write command (8-bit opcode + addr) */ - e1000_shift_out_ee_bits(hw, write_opcode, eeprom->opcode_bits); + /* Send the Write command (8-bit opcode + addr) */ + e1000_shift_out_ee_bits(hw, write_opcode, eeprom->opcode_bits); - e1000_shift_out_ee_bits(hw, (u16)((offset + widx)*2), - eeprom->address_bits); + e1000_shift_out_ee_bits(hw, (u16) ((offset + widx) * 2), + eeprom->address_bits); - /* Send the data */ + /* Send the data */ - /* Loop to allow for up to whole page write (32 bytes) of eeprom */ - while (widx < words) { - u16 word_out = data[widx]; - word_out = (word_out >> 8) | (word_out << 8); - e1000_shift_out_ee_bits(hw, word_out, 16); - widx++; + /* Loop to allow for up to whole page write (32 bytes) of eeprom */ + while (widx < words) { + u16 word_out = data[widx]; + word_out = (word_out >> 8) | (word_out << 8); + e1000_shift_out_ee_bits(hw, word_out, 16); + widx++; - /* Some larger eeprom sizes are capable of a 32-byte PAGE WRITE - * operation, while the smaller eeproms are capable of an 8-byte - * PAGE WRITE operation. Break the inner loop to pass new address - */ - if ((((offset + widx)*2) % eeprom->page_size) == 0) { - e1000_standby_eeprom(hw); - break; - } - } - } + /* Some larger eeprom sizes are capable of a 32-byte PAGE WRITE + * operation, while the smaller eeproms are capable of an 8-byte + * PAGE WRITE operation. Break the inner loop to pass new address + */ + if ((((offset + widx) * 2) % eeprom->page_size) == 0) { + e1000_standby_eeprom(hw); + break; + } + } + } - return E1000_SUCCESS; + return E1000_SUCCESS; } -/****************************************************************************** - * Writes a 16 bit word to a given offset in a Microwire EEPROM. - * - * hw - Struct containing variables accessed by shared code - * offset - offset within the EEPROM to be written to - * words - number of words to write - * data - pointer to array of 16 bit words to be written to the EEPROM - * - *****************************************************************************/ +/** + * e1000_write_eeprom_microwire - Writes a 16 bit word to a given offset in a Microwire EEPROM. + * @hw: Struct containing variables accessed by shared code + * @offset: offset within the EEPROM to be written to + * @words: number of words to write + * @data: pointer to array of 8 bit words to be written to the EEPROM + */ static s32 e1000_write_eeprom_microwire(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) { - struct e1000_eeprom_info *eeprom = &hw->eeprom; - u32 eecd; - u16 words_written = 0; - u16 i = 0; - - DEBUGFUNC("e1000_write_eeprom_microwire"); - - /* Send the write enable command to the EEPROM (3-bit opcode plus - * 6/8-bit dummy address beginning with 11). It's less work to include - * the 11 of the dummy address as part of the opcode than it is to shift - * it over the correct number of bits for the address. This puts the - * EEPROM into write/erase mode. - */ - e1000_shift_out_ee_bits(hw, EEPROM_EWEN_OPCODE_MICROWIRE, - (u16)(eeprom->opcode_bits + 2)); - - e1000_shift_out_ee_bits(hw, 0, (u16)(eeprom->address_bits - 2)); - - /* Prepare the EEPROM */ - e1000_standby_eeprom(hw); - - while (words_written < words) { - /* Send the Write command (3-bit opcode + addr) */ - e1000_shift_out_ee_bits(hw, EEPROM_WRITE_OPCODE_MICROWIRE, - eeprom->opcode_bits); - - e1000_shift_out_ee_bits(hw, (u16)(offset + words_written), - eeprom->address_bits); - - /* Send the data */ - e1000_shift_out_ee_bits(hw, data[words_written], 16); - - /* Toggle the CS line. This in effect tells the EEPROM to execute - * the previous command. - */ - e1000_standby_eeprom(hw); - - /* Read DO repeatedly until it is high (equal to '1'). The EEPROM will - * signal that the command has been completed by raising the DO signal. - * If DO does not go high in 10 milliseconds, then error out. - */ - for (i = 0; i < 200; i++) { - eecd = er32(EECD); - if (eecd & E1000_EECD_DO) break; - udelay(50); - } - if (i == 200) { - DEBUGOUT("EEPROM Write did not complete\n"); - return -E1000_ERR_EEPROM; - } - - /* Recover from write */ - e1000_standby_eeprom(hw); - - words_written++; - } - - /* Send the write disable command to the EEPROM (3-bit opcode plus - * 6/8-bit dummy address beginning with 10). It's less work to include - * the 10 of the dummy address as part of the opcode than it is to shift - * it over the correct number of bits for the address. This takes the - * EEPROM out of write/erase mode. - */ - e1000_shift_out_ee_bits(hw, EEPROM_EWDS_OPCODE_MICROWIRE, - (u16)(eeprom->opcode_bits + 2)); - - e1000_shift_out_ee_bits(hw, 0, (u16)(eeprom->address_bits - 2)); - - return E1000_SUCCESS; -} + struct e1000_eeprom_info *eeprom = &hw->eeprom; + u32 eecd; + u16 words_written = 0; + u16 i = 0; -/****************************************************************************** - * Flushes the cached eeprom to NVM. This is done by saving the modified values - * in the eeprom cache and the non modified values in the currently active bank - * to the new bank. - * - * hw - Struct containing variables accessed by shared code - * offset - offset of word in the EEPROM to read - * data - word read from the EEPROM - * words - number of words to read - *****************************************************************************/ -static s32 e1000_commit_shadow_ram(struct e1000_hw *hw) -{ - u32 attempts = 100000; - u32 eecd = 0; - u32 flop = 0; - u32 i = 0; - s32 error = E1000_SUCCESS; - u32 old_bank_offset = 0; - u32 new_bank_offset = 0; - u8 low_byte = 0; - u8 high_byte = 0; - bool sector_write_failed = false; - - if (hw->mac_type == e1000_82573) { - /* The flop register will be used to determine if flash type is STM */ - flop = er32(FLOP); - for (i=0; i < attempts; i++) { - eecd = er32(EECD); - if ((eecd & E1000_EECD_FLUPD) == 0) { - break; - } - udelay(5); - } - - if (i == attempts) { - return -E1000_ERR_EEPROM; - } - - /* If STM opcode located in bits 15:8 of flop, reset firmware */ - if ((flop & 0xFF00) == E1000_STM_OPCODE) { - ew32(HICR, E1000_HICR_FW_RESET); - } - - /* Perform the flash update */ - ew32(EECD, eecd | E1000_EECD_FLUPD); - - for (i=0; i < attempts; i++) { - eecd = er32(EECD); - if ((eecd & E1000_EECD_FLUPD) == 0) { - break; - } - udelay(5); - } - - if (i == attempts) { - return -E1000_ERR_EEPROM; - } - } - - if (hw->mac_type == e1000_ich8lan && hw->eeprom_shadow_ram != NULL) { - /* We're writing to the opposite bank so if we're on bank 1, - * write to bank 0 etc. We also need to erase the segment that - * is going to be written */ - if (!(er32(EECD) & E1000_EECD_SEC1VAL)) { - new_bank_offset = hw->flash_bank_size * 2; - old_bank_offset = 0; - e1000_erase_ich8_4k_segment(hw, 1); - } else { - old_bank_offset = hw->flash_bank_size * 2; - new_bank_offset = 0; - e1000_erase_ich8_4k_segment(hw, 0); - } - - sector_write_failed = false; - /* Loop for every byte in the shadow RAM, - * which is in units of words. */ - for (i = 0; i < E1000_SHADOW_RAM_WORDS; i++) { - /* Determine whether to write the value stored - * in the other NVM bank or a modified value stored - * in the shadow RAM */ - if (hw->eeprom_shadow_ram[i].modified) { - low_byte = (u8)hw->eeprom_shadow_ram[i].eeprom_word; - udelay(100); - error = e1000_verify_write_ich8_byte(hw, - (i << 1) + new_bank_offset, low_byte); - - if (error != E1000_SUCCESS) - sector_write_failed = true; - else { - high_byte = - (u8)(hw->eeprom_shadow_ram[i].eeprom_word >> 8); - udelay(100); - } - } else { - e1000_read_ich8_byte(hw, (i << 1) + old_bank_offset, - &low_byte); - udelay(100); - error = e1000_verify_write_ich8_byte(hw, - (i << 1) + new_bank_offset, low_byte); - - if (error != E1000_SUCCESS) - sector_write_failed = true; - else { - e1000_read_ich8_byte(hw, (i << 1) + old_bank_offset + 1, - &high_byte); - udelay(100); - } - } - - /* If the write of the low byte was successful, go ahead and - * write the high byte while checking to make sure that if it - * is the signature byte, then it is handled properly */ - if (!sector_write_failed) { - /* If the word is 0x13, then make sure the signature bits - * (15:14) are 11b until the commit has completed. - * This will allow us to write 10b which indicates the - * signature is valid. We want to do this after the write - * has completed so that we don't mark the segment valid - * while the write is still in progress */ - if (i == E1000_ICH_NVM_SIG_WORD) - high_byte = E1000_ICH_NVM_SIG_MASK | high_byte; - - error = e1000_verify_write_ich8_byte(hw, - (i << 1) + new_bank_offset + 1, high_byte); - if (error != E1000_SUCCESS) - sector_write_failed = true; - - } else { - /* If the write failed then break from the loop and - * return an error */ - break; - } - } - - /* Don't bother writing the segment valid bits if sector - * programming failed. */ - if (!sector_write_failed) { - /* Finally validate the new segment by setting bit 15:14 - * to 10b in word 0x13 , this can be done without an - * erase as well since these bits are 11 to start with - * and we need to change bit 14 to 0b */ - e1000_read_ich8_byte(hw, - E1000_ICH_NVM_SIG_WORD * 2 + 1 + new_bank_offset, - &high_byte); - high_byte &= 0xBF; - error = e1000_verify_write_ich8_byte(hw, - E1000_ICH_NVM_SIG_WORD * 2 + 1 + new_bank_offset, high_byte); - /* And invalidate the previously valid segment by setting - * its signature word (0x13) high_byte to 0b. This can be - * done without an erase because flash erase sets all bits - * to 1's. We can write 1's to 0's without an erase */ - if (error == E1000_SUCCESS) { - error = e1000_verify_write_ich8_byte(hw, - E1000_ICH_NVM_SIG_WORD * 2 + 1 + old_bank_offset, 0); - } - - /* Clear the now not used entry in the cache */ - for (i = 0; i < E1000_SHADOW_RAM_WORDS; i++) { - hw->eeprom_shadow_ram[i].modified = false; - hw->eeprom_shadow_ram[i].eeprom_word = 0xFFFF; - } - } - } - - return error; + DEBUGFUNC("e1000_write_eeprom_microwire"); + + /* Send the write enable command to the EEPROM (3-bit opcode plus + * 6/8-bit dummy address beginning with 11). It's less work to include + * the 11 of the dummy address as part of the opcode than it is to shift + * it over the correct number of bits for the address. This puts the + * EEPROM into write/erase mode. + */ + e1000_shift_out_ee_bits(hw, EEPROM_EWEN_OPCODE_MICROWIRE, + (u16) (eeprom->opcode_bits + 2)); + + e1000_shift_out_ee_bits(hw, 0, (u16) (eeprom->address_bits - 2)); + + /* Prepare the EEPROM */ + e1000_standby_eeprom(hw); + + while (words_written < words) { + /* Send the Write command (3-bit opcode + addr) */ + e1000_shift_out_ee_bits(hw, EEPROM_WRITE_OPCODE_MICROWIRE, + eeprom->opcode_bits); + + e1000_shift_out_ee_bits(hw, (u16) (offset + words_written), + eeprom->address_bits); + + /* Send the data */ + e1000_shift_out_ee_bits(hw, data[words_written], 16); + + /* Toggle the CS line. This in effect tells the EEPROM to execute + * the previous command. + */ + e1000_standby_eeprom(hw); + + /* Read DO repeatedly until it is high (equal to '1'). The EEPROM will + * signal that the command has been completed by raising the DO signal. + * If DO does not go high in 10 milliseconds, then error out. + */ + for (i = 0; i < 200; i++) { + eecd = er32(EECD); + if (eecd & E1000_EECD_DO) + break; + udelay(50); + } + if (i == 200) { + DEBUGOUT("EEPROM Write did not complete\n"); + return -E1000_ERR_EEPROM; + } + + /* Recover from write */ + e1000_standby_eeprom(hw); + + words_written++; + } + + /* Send the write disable command to the EEPROM (3-bit opcode plus + * 6/8-bit dummy address beginning with 10). It's less work to include + * the 10 of the dummy address as part of the opcode than it is to shift + * it over the correct number of bits for the address. This takes the + * EEPROM out of write/erase mode. + */ + e1000_shift_out_ee_bits(hw, EEPROM_EWDS_OPCODE_MICROWIRE, + (u16) (eeprom->opcode_bits + 2)); + + e1000_shift_out_ee_bits(hw, 0, (u16) (eeprom->address_bits - 2)); + + return E1000_SUCCESS; } -/****************************************************************************** +/** + * e1000_read_mac_addr - read the adapters MAC from eeprom + * @hw: Struct containing variables accessed by shared code + * * Reads the adapter's MAC address from the EEPROM and inverts the LSB for the * second function of dual function devices - * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ + */ s32 e1000_read_mac_addr(struct e1000_hw *hw) { - u16 offset; - u16 eeprom_data, i; - - DEBUGFUNC("e1000_read_mac_addr"); - - for (i = 0; i < NODE_ADDRESS_SIZE; i += 2) { - offset = i >> 1; - if (e1000_read_eeprom(hw, offset, 1, &eeprom_data) < 0) { - DEBUGOUT("EEPROM Read Error\n"); - return -E1000_ERR_EEPROM; - } - hw->perm_mac_addr[i] = (u8)(eeprom_data & 0x00FF); - hw->perm_mac_addr[i+1] = (u8)(eeprom_data >> 8); - } - - switch (hw->mac_type) { - default: - break; - case e1000_82546: - case e1000_82546_rev_3: - case e1000_82571: - case e1000_80003es2lan: - if (er32(STATUS) & E1000_STATUS_FUNC_1) - hw->perm_mac_addr[5] ^= 0x01; - break; - } - - for (i = 0; i < NODE_ADDRESS_SIZE; i++) - hw->mac_addr[i] = hw->perm_mac_addr[i]; - return E1000_SUCCESS; + u16 offset; + u16 eeprom_data, i; + + DEBUGFUNC("e1000_read_mac_addr"); + + for (i = 0; i < NODE_ADDRESS_SIZE; i += 2) { + offset = i >> 1; + if (e1000_read_eeprom(hw, offset, 1, &eeprom_data) < 0) { + DEBUGOUT("EEPROM Read Error\n"); + return -E1000_ERR_EEPROM; + } + hw->perm_mac_addr[i] = (u8) (eeprom_data & 0x00FF); + hw->perm_mac_addr[i + 1] = (u8) (eeprom_data >> 8); + } + + switch (hw->mac_type) { + default: + break; + case e1000_82546: + case e1000_82546_rev_3: + if (er32(STATUS) & E1000_STATUS_FUNC_1) + hw->perm_mac_addr[5] ^= 0x01; + break; + } + + for (i = 0; i < NODE_ADDRESS_SIZE; i++) + hw->mac_addr[i] = hw->perm_mac_addr[i]; + return E1000_SUCCESS; } -/****************************************************************************** - * Initializes receive address filters. - * - * hw - Struct containing variables accessed by shared code +/** + * e1000_init_rx_addrs - Initializes receive address filters. + * @hw: Struct containing variables accessed by shared code * * Places the MAC address in receive address register 0 and clears the rest - * of the receive addresss registers. Clears the multicast table. Assumes + * of the receive address registers. Clears the multicast table. Assumes * the receiver is in reset when the routine is called. - *****************************************************************************/ + */ static void e1000_init_rx_addrs(struct e1000_hw *hw) { - u32 i; - u32 rar_num; - - DEBUGFUNC("e1000_init_rx_addrs"); - - /* Setup the receive address. */ - DEBUGOUT("Programming MAC Address into RAR[0]\n"); - - e1000_rar_set(hw, hw->mac_addr, 0); - - rar_num = E1000_RAR_ENTRIES; - - /* Reserve a spot for the Locally Administered Address to work around - * an 82571 issue in which a reset on one port will reload the MAC on - * the other port. */ - if ((hw->mac_type == e1000_82571) && (hw->laa_is_present)) - rar_num -= 1; - if (hw->mac_type == e1000_ich8lan) - rar_num = E1000_RAR_ENTRIES_ICH8LAN; - - /* Zero out the other 15 receive addresses. */ - DEBUGOUT("Clearing RAR[1-15]\n"); - for (i = 1; i < rar_num; i++) { - E1000_WRITE_REG_ARRAY(hw, RA, (i << 1), 0); - E1000_WRITE_FLUSH(); - E1000_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0); - E1000_WRITE_FLUSH(); - } + u32 i; + u32 rar_num; + + DEBUGFUNC("e1000_init_rx_addrs"); + + /* Setup the receive address. */ + DEBUGOUT("Programming MAC Address into RAR[0]\n"); + + e1000_rar_set(hw, hw->mac_addr, 0); + + rar_num = E1000_RAR_ENTRIES; + + /* Zero out the other 15 receive addresses. */ + DEBUGOUT("Clearing RAR[1-15]\n"); + for (i = 1; i < rar_num; i++) { + E1000_WRITE_REG_ARRAY(hw, RA, (i << 1), 0); + E1000_WRITE_FLUSH(); + E1000_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0); + E1000_WRITE_FLUSH(); + } } -/****************************************************************************** - * Hashes an address to determine its location in the multicast table - * - * hw - Struct containing variables accessed by shared code - * mc_addr - the multicast address to hash - *****************************************************************************/ +/** + * e1000_hash_mc_addr - Hashes an address to determine its location in the multicast table + * @hw: Struct containing variables accessed by shared code + * @mc_addr: the multicast address to hash + */ u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr) { - u32 hash_value = 0; - - /* The portion of the address that is used for the hash table is - * determined by the mc_filter_type setting. - */ - switch (hw->mc_filter_type) { - /* [0] [1] [2] [3] [4] [5] - * 01 AA 00 12 34 56 - * LSB MSB - */ - case 0: - if (hw->mac_type == e1000_ich8lan) { - /* [47:38] i.e. 0x158 for above example address */ - hash_value = ((mc_addr[4] >> 6) | (((u16)mc_addr[5]) << 2)); - } else { - /* [47:36] i.e. 0x563 for above example address */ - hash_value = ((mc_addr[4] >> 4) | (((u16)mc_addr[5]) << 4)); - } - break; - case 1: - if (hw->mac_type == e1000_ich8lan) { - /* [46:37] i.e. 0x2B1 for above example address */ - hash_value = ((mc_addr[4] >> 5) | (((u16)mc_addr[5]) << 3)); - } else { - /* [46:35] i.e. 0xAC6 for above example address */ - hash_value = ((mc_addr[4] >> 3) | (((u16)mc_addr[5]) << 5)); - } - break; - case 2: - if (hw->mac_type == e1000_ich8lan) { - /*[45:36] i.e. 0x163 for above example address */ - hash_value = ((mc_addr[4] >> 4) | (((u16)mc_addr[5]) << 4)); - } else { - /* [45:34] i.e. 0x5D8 for above example address */ - hash_value = ((mc_addr[4] >> 2) | (((u16)mc_addr[5]) << 6)); - } - break; - case 3: - if (hw->mac_type == e1000_ich8lan) { - /* [43:34] i.e. 0x18D for above example address */ - hash_value = ((mc_addr[4] >> 2) | (((u16)mc_addr[5]) << 6)); - } else { - /* [43:32] i.e. 0x634 for above example address */ - hash_value = ((mc_addr[4]) | (((u16)mc_addr[5]) << 8)); - } - break; - } - - hash_value &= 0xFFF; - if (hw->mac_type == e1000_ich8lan) - hash_value &= 0x3FF; - - return hash_value; + u32 hash_value = 0; + + /* The portion of the address that is used for the hash table is + * determined by the mc_filter_type setting. + */ + switch (hw->mc_filter_type) { + /* [0] [1] [2] [3] [4] [5] + * 01 AA 00 12 34 56 + * LSB MSB + */ + case 0: + /* [47:36] i.e. 0x563 for above example address */ + hash_value = ((mc_addr[4] >> 4) | (((u16) mc_addr[5]) << 4)); + break; + case 1: + /* [46:35] i.e. 0xAC6 for above example address */ + hash_value = ((mc_addr[4] >> 3) | (((u16) mc_addr[5]) << 5)); + break; + case 2: + /* [45:34] i.e. 0x5D8 for above example address */ + hash_value = ((mc_addr[4] >> 2) | (((u16) mc_addr[5]) << 6)); + break; + case 3: + /* [43:32] i.e. 0x634 for above example address */ + hash_value = ((mc_addr[4]) | (((u16) mc_addr[5]) << 8)); + break; + } + + hash_value &= 0xFFF; + return hash_value; } -/****************************************************************************** - * Puts an ethernet address into a receive address register. - * - * hw - Struct containing variables accessed by shared code - * addr - Address to put into receive address register - * index - Receive address register to write - *****************************************************************************/ +/** + * e1000_rar_set - Puts an ethernet address into a receive address register. + * @hw: Struct containing variables accessed by shared code + * @addr: Address to put into receive address register + * @index: Receive address register to write + */ void e1000_rar_set(struct e1000_hw *hw, u8 *addr, u32 index) { - u32 rar_low, rar_high; - - /* HW expects these in little endian so we reverse the byte order - * from network order (big endian) to little endian - */ - rar_low = ((u32)addr[0] | ((u32)addr[1] << 8) | - ((u32)addr[2] << 16) | ((u32)addr[3] << 24)); - rar_high = ((u32)addr[4] | ((u32)addr[5] << 8)); - - /* Disable Rx and flush all Rx frames before enabling RSS to avoid Rx - * unit hang. - * - * Description: - * If there are any Rx frames queued up or otherwise present in the HW - * before RSS is enabled, and then we enable RSS, the HW Rx unit will - * hang. To work around this issue, we have to disable receives and - * flush out all Rx frames before we enable RSS. To do so, we modify we - * redirect all Rx traffic to manageability and then reset the HW. - * This flushes away Rx frames, and (since the redirections to - * manageability persists across resets) keeps new ones from coming in - * while we work. Then, we clear the Address Valid AV bit for all MAC - * addresses and undo the re-direction to manageability. - * Now, frames are coming in again, but the MAC won't accept them, so - * far so good. We now proceed to initialize RSS (if necessary) and - * configure the Rx unit. Last, we re-enable the AV bits and continue - * on our merry way. - */ - switch (hw->mac_type) { - case e1000_82571: - case e1000_82572: - case e1000_80003es2lan: - if (hw->leave_av_bit_off) - break; - default: - /* Indicate to hardware the Address is Valid. */ - rar_high |= E1000_RAH_AV; - break; - } - - E1000_WRITE_REG_ARRAY(hw, RA, (index << 1), rar_low); - E1000_WRITE_FLUSH(); - E1000_WRITE_REG_ARRAY(hw, RA, ((index << 1) + 1), rar_high); - E1000_WRITE_FLUSH(); + u32 rar_low, rar_high; + + /* HW expects these in little endian so we reverse the byte order + * from network order (big endian) to little endian + */ + rar_low = ((u32) addr[0] | ((u32) addr[1] << 8) | + ((u32) addr[2] << 16) | ((u32) addr[3] << 24)); + rar_high = ((u32) addr[4] | ((u32) addr[5] << 8)); + + /* Disable Rx and flush all Rx frames before enabling RSS to avoid Rx + * unit hang. + * + * Description: + * If there are any Rx frames queued up or otherwise present in the HW + * before RSS is enabled, and then we enable RSS, the HW Rx unit will + * hang. To work around this issue, we have to disable receives and + * flush out all Rx frames before we enable RSS. To do so, we modify we + * redirect all Rx traffic to manageability and then reset the HW. + * This flushes away Rx frames, and (since the redirections to + * manageability persists across resets) keeps new ones from coming in + * while we work. Then, we clear the Address Valid AV bit for all MAC + * addresses and undo the re-direction to manageability. + * Now, frames are coming in again, but the MAC won't accept them, so + * far so good. We now proceed to initialize RSS (if necessary) and + * configure the Rx unit. Last, we re-enable the AV bits and continue + * on our merry way. + */ + switch (hw->mac_type) { + default: + /* Indicate to hardware the Address is Valid. */ + rar_high |= E1000_RAH_AV; + break; + } + + E1000_WRITE_REG_ARRAY(hw, RA, (index << 1), rar_low); + E1000_WRITE_FLUSH(); + E1000_WRITE_REG_ARRAY(hw, RA, ((index << 1) + 1), rar_high); + E1000_WRITE_FLUSH(); } -/****************************************************************************** - * Writes a value to the specified offset in the VLAN filter table. - * - * hw - Struct containing variables accessed by shared code - * offset - Offset in VLAN filer table to write - * value - Value to write into VLAN filter table - *****************************************************************************/ +/** + * e1000_write_vfta - Writes a value to the specified offset in the VLAN filter table. + * @hw: Struct containing variables accessed by shared code + * @offset: Offset in VLAN filer table to write + * @value: Value to write into VLAN filter table + */ void e1000_write_vfta(struct e1000_hw *hw, u32 offset, u32 value) { - u32 temp; - - if (hw->mac_type == e1000_ich8lan) - return; - - if ((hw->mac_type == e1000_82544) && ((offset & 0x1) == 1)) { - temp = E1000_READ_REG_ARRAY(hw, VFTA, (offset - 1)); - E1000_WRITE_REG_ARRAY(hw, VFTA, offset, value); - E1000_WRITE_FLUSH(); - E1000_WRITE_REG_ARRAY(hw, VFTA, (offset - 1), temp); - E1000_WRITE_FLUSH(); - } else { - E1000_WRITE_REG_ARRAY(hw, VFTA, offset, value); - E1000_WRITE_FLUSH(); - } + u32 temp; + + if ((hw->mac_type == e1000_82544) && ((offset & 0x1) == 1)) { + temp = E1000_READ_REG_ARRAY(hw, VFTA, (offset - 1)); + E1000_WRITE_REG_ARRAY(hw, VFTA, offset, value); + E1000_WRITE_FLUSH(); + E1000_WRITE_REG_ARRAY(hw, VFTA, (offset - 1), temp); + E1000_WRITE_FLUSH(); + } else { + E1000_WRITE_REG_ARRAY(hw, VFTA, offset, value); + E1000_WRITE_FLUSH(); + } } -/****************************************************************************** - * Clears the VLAN filer table - * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ +/** + * e1000_clear_vfta - Clears the VLAN filer table + * @hw: Struct containing variables accessed by shared code + */ static void e1000_clear_vfta(struct e1000_hw *hw) { - u32 offset; - u32 vfta_value = 0; - u32 vfta_offset = 0; - u32 vfta_bit_in_reg = 0; - - if (hw->mac_type == e1000_ich8lan) - return; - - if (hw->mac_type == e1000_82573) { - if (hw->mng_cookie.vlan_id != 0) { - /* The VFTA is a 4096b bit-field, each identifying a single VLAN - * ID. The following operations determine which 32b entry - * (i.e. offset) into the array we want to set the VLAN ID - * (i.e. bit) of the manageability unit. */ - vfta_offset = (hw->mng_cookie.vlan_id >> - E1000_VFTA_ENTRY_SHIFT) & - E1000_VFTA_ENTRY_MASK; - vfta_bit_in_reg = 1 << (hw->mng_cookie.vlan_id & - E1000_VFTA_ENTRY_BIT_SHIFT_MASK); - } - } - for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) { - /* If the offset we want to clear is the same offset of the - * manageability VLAN ID, then clear all bits except that of the - * manageability unit */ - vfta_value = (offset == vfta_offset) ? vfta_bit_in_reg : 0; - E1000_WRITE_REG_ARRAY(hw, VFTA, offset, vfta_value); - E1000_WRITE_FLUSH(); - } + u32 offset; + u32 vfta_value = 0; + u32 vfta_offset = 0; + u32 vfta_bit_in_reg = 0; + + for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) { + /* If the offset we want to clear is the same offset of the + * manageability VLAN ID, then clear all bits except that of the + * manageability unit */ + vfta_value = (offset == vfta_offset) ? vfta_bit_in_reg : 0; + E1000_WRITE_REG_ARRAY(hw, VFTA, offset, vfta_value); + E1000_WRITE_FLUSH(); + } } static s32 e1000_id_led_init(struct e1000_hw *hw) { - u32 ledctl; - const u32 ledctl_mask = 0x000000FF; - const u32 ledctl_on = E1000_LEDCTL_MODE_LED_ON; - const u32 ledctl_off = E1000_LEDCTL_MODE_LED_OFF; - u16 eeprom_data, i, temp; - const u16 led_mask = 0x0F; - - DEBUGFUNC("e1000_id_led_init"); - - if (hw->mac_type < e1000_82540) { - /* Nothing to do */ - return E1000_SUCCESS; - } - - ledctl = er32(LEDCTL); - hw->ledctl_default = ledctl; - hw->ledctl_mode1 = hw->ledctl_default; - hw->ledctl_mode2 = hw->ledctl_default; - - if (e1000_read_eeprom(hw, EEPROM_ID_LED_SETTINGS, 1, &eeprom_data) < 0) { - DEBUGOUT("EEPROM Read Error\n"); - return -E1000_ERR_EEPROM; - } - - if ((hw->mac_type == e1000_82573) && - (eeprom_data == ID_LED_RESERVED_82573)) - eeprom_data = ID_LED_DEFAULT_82573; - else if ((eeprom_data == ID_LED_RESERVED_0000) || - (eeprom_data == ID_LED_RESERVED_FFFF)) { - if (hw->mac_type == e1000_ich8lan) - eeprom_data = ID_LED_DEFAULT_ICH8LAN; - else - eeprom_data = ID_LED_DEFAULT; - } - - for (i = 0; i < 4; i++) { - temp = (eeprom_data >> (i << 2)) & led_mask; - switch (temp) { - case ID_LED_ON1_DEF2: - case ID_LED_ON1_ON2: - case ID_LED_ON1_OFF2: - hw->ledctl_mode1 &= ~(ledctl_mask << (i << 3)); - hw->ledctl_mode1 |= ledctl_on << (i << 3); - break; - case ID_LED_OFF1_DEF2: - case ID_LED_OFF1_ON2: - case ID_LED_OFF1_OFF2: - hw->ledctl_mode1 &= ~(ledctl_mask << (i << 3)); - hw->ledctl_mode1 |= ledctl_off << (i << 3); - break; - default: - /* Do nothing */ - break; - } - switch (temp) { - case ID_LED_DEF1_ON2: - case ID_LED_ON1_ON2: - case ID_LED_OFF1_ON2: - hw->ledctl_mode2 &= ~(ledctl_mask << (i << 3)); - hw->ledctl_mode2 |= ledctl_on << (i << 3); - break; - case ID_LED_DEF1_OFF2: - case ID_LED_ON1_OFF2: - case ID_LED_OFF1_OFF2: - hw->ledctl_mode2 &= ~(ledctl_mask << (i << 3)); - hw->ledctl_mode2 |= ledctl_off << (i << 3); - break; - default: - /* Do nothing */ - break; - } - } - return E1000_SUCCESS; + u32 ledctl; + const u32 ledctl_mask = 0x000000FF; + const u32 ledctl_on = E1000_LEDCTL_MODE_LED_ON; + const u32 ledctl_off = E1000_LEDCTL_MODE_LED_OFF; + u16 eeprom_data, i, temp; + const u16 led_mask = 0x0F; + + DEBUGFUNC("e1000_id_led_init"); + + if (hw->mac_type < e1000_82540) { + /* Nothing to do */ + return E1000_SUCCESS; + } + + ledctl = er32(LEDCTL); + hw->ledctl_default = ledctl; + hw->ledctl_mode1 = hw->ledctl_default; + hw->ledctl_mode2 = hw->ledctl_default; + + if (e1000_read_eeprom(hw, EEPROM_ID_LED_SETTINGS, 1, &eeprom_data) < 0) { + DEBUGOUT("EEPROM Read Error\n"); + return -E1000_ERR_EEPROM; + } + + if ((eeprom_data == ID_LED_RESERVED_0000) || + (eeprom_data == ID_LED_RESERVED_FFFF)) { + eeprom_data = ID_LED_DEFAULT; + } + + for (i = 0; i < 4; i++) { + temp = (eeprom_data >> (i << 2)) & led_mask; + switch (temp) { + case ID_LED_ON1_DEF2: + case ID_LED_ON1_ON2: + case ID_LED_ON1_OFF2: + hw->ledctl_mode1 &= ~(ledctl_mask << (i << 3)); + hw->ledctl_mode1 |= ledctl_on << (i << 3); + break; + case ID_LED_OFF1_DEF2: + case ID_LED_OFF1_ON2: + case ID_LED_OFF1_OFF2: + hw->ledctl_mode1 &= ~(ledctl_mask << (i << 3)); + hw->ledctl_mode1 |= ledctl_off << (i << 3); + break; + default: + /* Do nothing */ + break; + } + switch (temp) { + case ID_LED_DEF1_ON2: + case ID_LED_ON1_ON2: + case ID_LED_OFF1_ON2: + hw->ledctl_mode2 &= ~(ledctl_mask << (i << 3)); + hw->ledctl_mode2 |= ledctl_on << (i << 3); + break; + case ID_LED_DEF1_OFF2: + case ID_LED_ON1_OFF2: + case ID_LED_OFF1_OFF2: + hw->ledctl_mode2 &= ~(ledctl_mask << (i << 3)); + hw->ledctl_mode2 |= ledctl_off << (i << 3); + break; + default: + /* Do nothing */ + break; + } + } + return E1000_SUCCESS; } -/****************************************************************************** - * Prepares SW controlable LED for use and saves the current state of the LED. +/** + * e1000_setup_led + * @hw: Struct containing variables accessed by shared code * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ + * Prepares SW controlable LED for use and saves the current state of the LED. + */ s32 e1000_setup_led(struct e1000_hw *hw) { - u32 ledctl; - s32 ret_val = E1000_SUCCESS; - - DEBUGFUNC("e1000_setup_led"); - - switch (hw->mac_type) { - case e1000_82542_rev2_0: - case e1000_82542_rev2_1: - case e1000_82543: - case e1000_82544: - /* No setup necessary */ - break; - case e1000_82541: - case e1000_82547: - case e1000_82541_rev_2: - case e1000_82547_rev_2: - /* Turn off PHY Smart Power Down (if enabled) */ - ret_val = e1000_read_phy_reg(hw, IGP01E1000_GMII_FIFO, - &hw->phy_spd_default); - if (ret_val) - return ret_val; - ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO, - (u16)(hw->phy_spd_default & - ~IGP01E1000_GMII_SPD)); - if (ret_val) - return ret_val; - /* Fall Through */ - default: - if (hw->media_type == e1000_media_type_fiber) { - ledctl = er32(LEDCTL); - /* Save current LEDCTL settings */ - hw->ledctl_default = ledctl; - /* Turn off LED0 */ - ledctl &= ~(E1000_LEDCTL_LED0_IVRT | - E1000_LEDCTL_LED0_BLINK | - E1000_LEDCTL_LED0_MODE_MASK); - ledctl |= (E1000_LEDCTL_MODE_LED_OFF << - E1000_LEDCTL_LED0_MODE_SHIFT); - ew32(LEDCTL, ledctl); - } else if (hw->media_type == e1000_media_type_copper) - ew32(LEDCTL, hw->ledctl_mode1); - break; - } - - return E1000_SUCCESS; -} + u32 ledctl; + s32 ret_val = E1000_SUCCESS; + DEBUGFUNC("e1000_setup_led"); -/****************************************************************************** - * Used on 82571 and later Si that has LED blink bits. - * Callers must use their own timer and should have already called - * e1000_id_led_init() - * Call e1000_cleanup led() to stop blinking - * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ -s32 e1000_blink_led_start(struct e1000_hw *hw) -{ - s16 i; - u32 ledctl_blink = 0; - - DEBUGFUNC("e1000_id_led_blink_on"); - - if (hw->mac_type < e1000_82571) { - /* Nothing to do */ - return E1000_SUCCESS; - } - if (hw->media_type == e1000_media_type_fiber) { - /* always blink LED0 for PCI-E fiber */ - ledctl_blink = E1000_LEDCTL_LED0_BLINK | - (E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED0_MODE_SHIFT); - } else { - /* set the blink bit for each LED that's "on" (0x0E) in ledctl_mode2 */ - ledctl_blink = hw->ledctl_mode2; - for (i=0; i < 4; i++) - if (((hw->ledctl_mode2 >> (i * 8)) & 0xFF) == - E1000_LEDCTL_MODE_LED_ON) - ledctl_blink |= (E1000_LEDCTL_LED0_BLINK << (i * 8)); - } - - ew32(LEDCTL, ledctl_blink); - - return E1000_SUCCESS; + switch (hw->mac_type) { + case e1000_82542_rev2_0: + case e1000_82542_rev2_1: + case e1000_82543: + case e1000_82544: + /* No setup necessary */ + break; + case e1000_82541: + case e1000_82547: + case e1000_82541_rev_2: + case e1000_82547_rev_2: + /* Turn off PHY Smart Power Down (if enabled) */ + ret_val = e1000_read_phy_reg(hw, IGP01E1000_GMII_FIFO, + &hw->phy_spd_default); + if (ret_val) + return ret_val; + ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO, + (u16) (hw->phy_spd_default & + ~IGP01E1000_GMII_SPD)); + if (ret_val) + return ret_val; + /* Fall Through */ + default: + if (hw->media_type == e1000_media_type_fiber) { + ledctl = er32(LEDCTL); + /* Save current LEDCTL settings */ + hw->ledctl_default = ledctl; + /* Turn off LED0 */ + ledctl &= ~(E1000_LEDCTL_LED0_IVRT | + E1000_LEDCTL_LED0_BLINK | + E1000_LEDCTL_LED0_MODE_MASK); + ledctl |= (E1000_LEDCTL_MODE_LED_OFF << + E1000_LEDCTL_LED0_MODE_SHIFT); + ew32(LEDCTL, ledctl); + } else if (hw->media_type == e1000_media_type_copper) + ew32(LEDCTL, hw->ledctl_mode1); + break; + } + + return E1000_SUCCESS; } -/****************************************************************************** - * Restores the saved state of the SW controlable LED. - * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ +/** + * e1000_cleanup_led - Restores the saved state of the SW controlable LED. + * @hw: Struct containing variables accessed by shared code + */ s32 e1000_cleanup_led(struct e1000_hw *hw) { - s32 ret_val = E1000_SUCCESS; - - DEBUGFUNC("e1000_cleanup_led"); - - switch (hw->mac_type) { - case e1000_82542_rev2_0: - case e1000_82542_rev2_1: - case e1000_82543: - case e1000_82544: - /* No cleanup necessary */ - break; - case e1000_82541: - case e1000_82547: - case e1000_82541_rev_2: - case e1000_82547_rev_2: - /* Turn on PHY Smart Power Down (if previously enabled) */ - ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO, - hw->phy_spd_default); - if (ret_val) - return ret_val; - /* Fall Through */ - default: - if (hw->phy_type == e1000_phy_ife) { - e1000_write_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL_LED, 0); - break; - } - /* Restore LEDCTL settings */ - ew32(LEDCTL, hw->ledctl_default); - break; - } - - return E1000_SUCCESS; + s32 ret_val = E1000_SUCCESS; + + DEBUGFUNC("e1000_cleanup_led"); + + switch (hw->mac_type) { + case e1000_82542_rev2_0: + case e1000_82542_rev2_1: + case e1000_82543: + case e1000_82544: + /* No cleanup necessary */ + break; + case e1000_82541: + case e1000_82547: + case e1000_82541_rev_2: + case e1000_82547_rev_2: + /* Turn on PHY Smart Power Down (if previously enabled) */ + ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO, + hw->phy_spd_default); + if (ret_val) + return ret_val; + /* Fall Through */ + default: + /* Restore LEDCTL settings */ + ew32(LEDCTL, hw->ledctl_default); + break; + } + + return E1000_SUCCESS; } -/****************************************************************************** - * Turns on the software controllable LED - * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ +/** + * e1000_led_on - Turns on the software controllable LED + * @hw: Struct containing variables accessed by shared code + */ s32 e1000_led_on(struct e1000_hw *hw) { - u32 ctrl = er32(CTRL); - - DEBUGFUNC("e1000_led_on"); - - switch (hw->mac_type) { - case e1000_82542_rev2_0: - case e1000_82542_rev2_1: - case e1000_82543: - /* Set SW Defineable Pin 0 to turn on the LED */ - ctrl |= E1000_CTRL_SWDPIN0; - ctrl |= E1000_CTRL_SWDPIO0; - break; - case e1000_82544: - if (hw->media_type == e1000_media_type_fiber) { - /* Set SW Defineable Pin 0 to turn on the LED */ - ctrl |= E1000_CTRL_SWDPIN0; - ctrl |= E1000_CTRL_SWDPIO0; - } else { - /* Clear SW Defineable Pin 0 to turn on the LED */ - ctrl &= ~E1000_CTRL_SWDPIN0; - ctrl |= E1000_CTRL_SWDPIO0; - } - break; - default: - if (hw->media_type == e1000_media_type_fiber) { - /* Clear SW Defineable Pin 0 to turn on the LED */ - ctrl &= ~E1000_CTRL_SWDPIN0; - ctrl |= E1000_CTRL_SWDPIO0; - } else if (hw->phy_type == e1000_phy_ife) { - e1000_write_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL_LED, - (IFE_PSCL_PROBE_MODE | IFE_PSCL_PROBE_LEDS_ON)); - } else if (hw->media_type == e1000_media_type_copper) { - ew32(LEDCTL, hw->ledctl_mode2); - return E1000_SUCCESS; - } - break; - } - - ew32(CTRL, ctrl); - - return E1000_SUCCESS; + u32 ctrl = er32(CTRL); + + DEBUGFUNC("e1000_led_on"); + + switch (hw->mac_type) { + case e1000_82542_rev2_0: + case e1000_82542_rev2_1: + case e1000_82543: + /* Set SW Defineable Pin 0 to turn on the LED */ + ctrl |= E1000_CTRL_SWDPIN0; + ctrl |= E1000_CTRL_SWDPIO0; + break; + case e1000_82544: + if (hw->media_type == e1000_media_type_fiber) { + /* Set SW Defineable Pin 0 to turn on the LED */ + ctrl |= E1000_CTRL_SWDPIN0; + ctrl |= E1000_CTRL_SWDPIO0; + } else { + /* Clear SW Defineable Pin 0 to turn on the LED */ + ctrl &= ~E1000_CTRL_SWDPIN0; + ctrl |= E1000_CTRL_SWDPIO0; + } + break; + default: + if (hw->media_type == e1000_media_type_fiber) { + /* Clear SW Defineable Pin 0 to turn on the LED */ + ctrl &= ~E1000_CTRL_SWDPIN0; + ctrl |= E1000_CTRL_SWDPIO0; + } else if (hw->media_type == e1000_media_type_copper) { + ew32(LEDCTL, hw->ledctl_mode2); + return E1000_SUCCESS; + } + break; + } + + ew32(CTRL, ctrl); + + return E1000_SUCCESS; } -/****************************************************************************** - * Turns off the software controllable LED - * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ +/** + * e1000_led_off - Turns off the software controllable LED + * @hw: Struct containing variables accessed by shared code + */ s32 e1000_led_off(struct e1000_hw *hw) { - u32 ctrl = er32(CTRL); - - DEBUGFUNC("e1000_led_off"); - - switch (hw->mac_type) { - case e1000_82542_rev2_0: - case e1000_82542_rev2_1: - case e1000_82543: - /* Clear SW Defineable Pin 0 to turn off the LED */ - ctrl &= ~E1000_CTRL_SWDPIN0; - ctrl |= E1000_CTRL_SWDPIO0; - break; - case e1000_82544: - if (hw->media_type == e1000_media_type_fiber) { - /* Clear SW Defineable Pin 0 to turn off the LED */ - ctrl &= ~E1000_CTRL_SWDPIN0; - ctrl |= E1000_CTRL_SWDPIO0; - } else { - /* Set SW Defineable Pin 0 to turn off the LED */ - ctrl |= E1000_CTRL_SWDPIN0; - ctrl |= E1000_CTRL_SWDPIO0; - } - break; - default: - if (hw->media_type == e1000_media_type_fiber) { - /* Set SW Defineable Pin 0 to turn off the LED */ - ctrl |= E1000_CTRL_SWDPIN0; - ctrl |= E1000_CTRL_SWDPIO0; - } else if (hw->phy_type == e1000_phy_ife) { - e1000_write_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL_LED, - (IFE_PSCL_PROBE_MODE | IFE_PSCL_PROBE_LEDS_OFF)); - } else if (hw->media_type == e1000_media_type_copper) { - ew32(LEDCTL, hw->ledctl_mode1); - return E1000_SUCCESS; - } - break; - } - - ew32(CTRL, ctrl); - - return E1000_SUCCESS; + u32 ctrl = er32(CTRL); + + DEBUGFUNC("e1000_led_off"); + + switch (hw->mac_type) { + case e1000_82542_rev2_0: + case e1000_82542_rev2_1: + case e1000_82543: + /* Clear SW Defineable Pin 0 to turn off the LED */ + ctrl &= ~E1000_CTRL_SWDPIN0; + ctrl |= E1000_CTRL_SWDPIO0; + break; + case e1000_82544: + if (hw->media_type == e1000_media_type_fiber) { + /* Clear SW Defineable Pin 0 to turn off the LED */ + ctrl &= ~E1000_CTRL_SWDPIN0; + ctrl |= E1000_CTRL_SWDPIO0; + } else { + /* Set SW Defineable Pin 0 to turn off the LED */ + ctrl |= E1000_CTRL_SWDPIN0; + ctrl |= E1000_CTRL_SWDPIO0; + } + break; + default: + if (hw->media_type == e1000_media_type_fiber) { + /* Set SW Defineable Pin 0 to turn off the LED */ + ctrl |= E1000_CTRL_SWDPIN0; + ctrl |= E1000_CTRL_SWDPIO0; + } else if (hw->media_type == e1000_media_type_copper) { + ew32(LEDCTL, hw->ledctl_mode1); + return E1000_SUCCESS; + } + break; + } + + ew32(CTRL, ctrl); + + return E1000_SUCCESS; } -/****************************************************************************** - * Clears all hardware statistics counters. - * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ +/** + * e1000_clear_hw_cntrs - Clears all hardware statistics counters. + * @hw: Struct containing variables accessed by shared code + */ static void e1000_clear_hw_cntrs(struct e1000_hw *hw) { - volatile u32 temp; - - temp = er32(CRCERRS); - temp = er32(SYMERRS); - temp = er32(MPC); - temp = er32(SCC); - temp = er32(ECOL); - temp = er32(MCC); - temp = er32(LATECOL); - temp = er32(COLC); - temp = er32(DC); - temp = er32(SEC); - temp = er32(RLEC); - temp = er32(XONRXC); - temp = er32(XONTXC); - temp = er32(XOFFRXC); - temp = er32(XOFFTXC); - temp = er32(FCRUC); - - if (hw->mac_type != e1000_ich8lan) { - temp = er32(PRC64); - temp = er32(PRC127); - temp = er32(PRC255); - temp = er32(PRC511); - temp = er32(PRC1023); - temp = er32(PRC1522); - } - - temp = er32(GPRC); - temp = er32(BPRC); - temp = er32(MPRC); - temp = er32(GPTC); - temp = er32(GORCL); - temp = er32(GORCH); - temp = er32(GOTCL); - temp = er32(GOTCH); - temp = er32(RNBC); - temp = er32(RUC); - temp = er32(RFC); - temp = er32(ROC); - temp = er32(RJC); - temp = er32(TORL); - temp = er32(TORH); - temp = er32(TOTL); - temp = er32(TOTH); - temp = er32(TPR); - temp = er32(TPT); - - if (hw->mac_type != e1000_ich8lan) { - temp = er32(PTC64); - temp = er32(PTC127); - temp = er32(PTC255); - temp = er32(PTC511); - temp = er32(PTC1023); - temp = er32(PTC1522); - } - - temp = er32(MPTC); - temp = er32(BPTC); - - if (hw->mac_type < e1000_82543) return; - - temp = er32(ALGNERRC); - temp = er32(RXERRC); - temp = er32(TNCRS); - temp = er32(CEXTERR); - temp = er32(TSCTC); - temp = er32(TSCTFC); - - if (hw->mac_type <= e1000_82544) return; - - temp = er32(MGTPRC); - temp = er32(MGTPDC); - temp = er32(MGTPTC); - - if (hw->mac_type <= e1000_82547_rev_2) return; - - temp = er32(IAC); - temp = er32(ICRXOC); - - if (hw->mac_type == e1000_ich8lan) return; - - temp = er32(ICRXPTC); - temp = er32(ICRXATC); - temp = er32(ICTXPTC); - temp = er32(ICTXATC); - temp = er32(ICTXQEC); - temp = er32(ICTXQMTC); - temp = er32(ICRXDMTC); -} - -/****************************************************************************** - * Resets Adaptive IFS to its default state. - * - * hw - Struct containing variables accessed by shared code + volatile u32 temp; + + temp = er32(CRCERRS); + temp = er32(SYMERRS); + temp = er32(MPC); + temp = er32(SCC); + temp = er32(ECOL); + temp = er32(MCC); + temp = er32(LATECOL); + temp = er32(COLC); + temp = er32(DC); + temp = er32(SEC); + temp = er32(RLEC); + temp = er32(XONRXC); + temp = er32(XONTXC); + temp = er32(XOFFRXC); + temp = er32(XOFFTXC); + temp = er32(FCRUC); + + temp = er32(PRC64); + temp = er32(PRC127); + temp = er32(PRC255); + temp = er32(PRC511); + temp = er32(PRC1023); + temp = er32(PRC1522); + + temp = er32(GPRC); + temp = er32(BPRC); + temp = er32(MPRC); + temp = er32(GPTC); + temp = er32(GORCL); + temp = er32(GORCH); + temp = er32(GOTCL); + temp = er32(GOTCH); + temp = er32(RNBC); + temp = er32(RUC); + temp = er32(RFC); + temp = er32(ROC); + temp = er32(RJC); + temp = er32(TORL); + temp = er32(TORH); + temp = er32(TOTL); + temp = er32(TOTH); + temp = er32(TPR); + temp = er32(TPT); + + temp = er32(PTC64); + temp = er32(PTC127); + temp = er32(PTC255); + temp = er32(PTC511); + temp = er32(PTC1023); + temp = er32(PTC1522); + + temp = er32(MPTC); + temp = er32(BPTC); + + if (hw->mac_type < e1000_82543) + return; + + temp = er32(ALGNERRC); + temp = er32(RXERRC); + temp = er32(TNCRS); + temp = er32(CEXTERR); + temp = er32(TSCTC); + temp = er32(TSCTFC); + + if (hw->mac_type <= e1000_82544) + return; + + temp = er32(MGTPRC); + temp = er32(MGTPDC); + temp = er32(MGTPTC); +} + +/** + * e1000_reset_adaptive - Resets Adaptive IFS to its default state. + * @hw: Struct containing variables accessed by shared code * * Call this after e1000_init_hw. You may override the IFS defaults by setting * hw->ifs_params_forced to true. However, you must initialize hw-> * current_ifs_val, ifs_min_val, ifs_max_val, ifs_step_size, and ifs_ratio * before calling this function. - *****************************************************************************/ + */ void e1000_reset_adaptive(struct e1000_hw *hw) { - DEBUGFUNC("e1000_reset_adaptive"); - - if (hw->adaptive_ifs) { - if (!hw->ifs_params_forced) { - hw->current_ifs_val = 0; - hw->ifs_min_val = IFS_MIN; - hw->ifs_max_val = IFS_MAX; - hw->ifs_step_size = IFS_STEP; - hw->ifs_ratio = IFS_RATIO; - } - hw->in_ifs_mode = false; - ew32(AIT, 0); - } else { - DEBUGOUT("Not in Adaptive IFS mode!\n"); - } + DEBUGFUNC("e1000_reset_adaptive"); + + if (hw->adaptive_ifs) { + if (!hw->ifs_params_forced) { + hw->current_ifs_val = 0; + hw->ifs_min_val = IFS_MIN; + hw->ifs_max_val = IFS_MAX; + hw->ifs_step_size = IFS_STEP; + hw->ifs_ratio = IFS_RATIO; + } + hw->in_ifs_mode = false; + ew32(AIT, 0); + } else { + DEBUGOUT("Not in Adaptive IFS mode!\n"); + } } -/****************************************************************************** +/** + * e1000_update_adaptive - update adaptive IFS + * @hw: Struct containing variables accessed by shared code + * @tx_packets: Number of transmits since last callback + * @total_collisions: Number of collisions since last callback + * * Called during the callback/watchdog routine to update IFS value based on * the ratio of transmits to collisions. - * - * hw - Struct containing variables accessed by shared code - * tx_packets - Number of transmits since last callback - * total_collisions - Number of collisions since last callback - *****************************************************************************/ + */ void e1000_update_adaptive(struct e1000_hw *hw) { - DEBUGFUNC("e1000_update_adaptive"); - - if (hw->adaptive_ifs) { - if ((hw->collision_delta * hw->ifs_ratio) > hw->tx_packet_delta) { - if (hw->tx_packet_delta > MIN_NUM_XMITS) { - hw->in_ifs_mode = true; - if (hw->current_ifs_val < hw->ifs_max_val) { - if (hw->current_ifs_val == 0) - hw->current_ifs_val = hw->ifs_min_val; - else - hw->current_ifs_val += hw->ifs_step_size; - ew32(AIT, hw->current_ifs_val); - } - } - } else { - if (hw->in_ifs_mode && (hw->tx_packet_delta <= MIN_NUM_XMITS)) { - hw->current_ifs_val = 0; - hw->in_ifs_mode = false; - ew32(AIT, 0); - } - } - } else { - DEBUGOUT("Not in Adaptive IFS mode!\n"); - } + DEBUGFUNC("e1000_update_adaptive"); + + if (hw->adaptive_ifs) { + if ((hw->collision_delta *hw->ifs_ratio) > hw->tx_packet_delta) { + if (hw->tx_packet_delta > MIN_NUM_XMITS) { + hw->in_ifs_mode = true; + if (hw->current_ifs_val < hw->ifs_max_val) { + if (hw->current_ifs_val == 0) + hw->current_ifs_val = + hw->ifs_min_val; + else + hw->current_ifs_val += + hw->ifs_step_size; + ew32(AIT, hw->current_ifs_val); + } + } + } else { + if (hw->in_ifs_mode + && (hw->tx_packet_delta <= MIN_NUM_XMITS)) { + hw->current_ifs_val = 0; + hw->in_ifs_mode = false; + ew32(AIT, 0); + } + } + } else { + DEBUGOUT("Not in Adaptive IFS mode!\n"); + } } -/****************************************************************************** - * Adjusts the statistic counters when a frame is accepted by TBI_ACCEPT +/** + * e1000_tbi_adjust_stats + * @hw: Struct containing variables accessed by shared code + * @frame_len: The length of the frame in question + * @mac_addr: The Ethernet destination address of the frame in question * - * hw - Struct containing variables accessed by shared code - * frame_len - The length of the frame in question - * mac_addr - The Ethernet destination address of the frame in question - *****************************************************************************/ + * Adjusts the statistic counters when a frame is accepted by TBI_ACCEPT + */ void e1000_tbi_adjust_stats(struct e1000_hw *hw, struct e1000_hw_stats *stats, u32 frame_len, u8 *mac_addr) { - u64 carry_bit; - - /* First adjust the frame length. */ - frame_len--; - /* We need to adjust the statistics counters, since the hardware - * counters overcount this packet as a CRC error and undercount - * the packet as a good packet - */ - /* This packet should not be counted as a CRC error. */ - stats->crcerrs--; - /* This packet does count as a Good Packet Received. */ - stats->gprc++; - - /* Adjust the Good Octets received counters */ - carry_bit = 0x80000000 & stats->gorcl; - stats->gorcl += frame_len; - /* If the high bit of Gorcl (the low 32 bits of the Good Octets - * Received Count) was one before the addition, - * AND it is zero after, then we lost the carry out, - * need to add one to Gorch (Good Octets Received Count High). - * This could be simplified if all environments supported - * 64-bit integers. - */ - if (carry_bit && ((stats->gorcl & 0x80000000) == 0)) - stats->gorch++; - /* Is this a broadcast or multicast? Check broadcast first, - * since the test for a multicast frame will test positive on - * a broadcast frame. - */ - if ((mac_addr[0] == (u8)0xff) && (mac_addr[1] == (u8)0xff)) - /* Broadcast packet */ - stats->bprc++; - else if (*mac_addr & 0x01) - /* Multicast packet */ - stats->mprc++; - - if (frame_len == hw->max_frame_size) { - /* In this case, the hardware has overcounted the number of - * oversize frames. - */ - if (stats->roc > 0) - stats->roc--; - } - - /* Adjust the bin counters when the extra byte put the frame in the - * wrong bin. Remember that the frame_len was adjusted above. - */ - if (frame_len == 64) { - stats->prc64++; - stats->prc127--; - } else if (frame_len == 127) { - stats->prc127++; - stats->prc255--; - } else if (frame_len == 255) { - stats->prc255++; - stats->prc511--; - } else if (frame_len == 511) { - stats->prc511++; - stats->prc1023--; - } else if (frame_len == 1023) { - stats->prc1023++; - stats->prc1522--; - } else if (frame_len == 1522) { - stats->prc1522++; - } + u64 carry_bit; + + /* First adjust the frame length. */ + frame_len--; + /* We need to adjust the statistics counters, since the hardware + * counters overcount this packet as a CRC error and undercount + * the packet as a good packet + */ + /* This packet should not be counted as a CRC error. */ + stats->crcerrs--; + /* This packet does count as a Good Packet Received. */ + stats->gprc++; + + /* Adjust the Good Octets received counters */ + carry_bit = 0x80000000 & stats->gorcl; + stats->gorcl += frame_len; + /* If the high bit of Gorcl (the low 32 bits of the Good Octets + * Received Count) was one before the addition, + * AND it is zero after, then we lost the carry out, + * need to add one to Gorch (Good Octets Received Count High). + * This could be simplified if all environments supported + * 64-bit integers. + */ + if (carry_bit && ((stats->gorcl & 0x80000000) == 0)) + stats->gorch++; + /* Is this a broadcast or multicast? Check broadcast first, + * since the test for a multicast frame will test positive on + * a broadcast frame. + */ + if ((mac_addr[0] == (u8) 0xff) && (mac_addr[1] == (u8) 0xff)) + /* Broadcast packet */ + stats->bprc++; + else if (*mac_addr & 0x01) + /* Multicast packet */ + stats->mprc++; + + if (frame_len == hw->max_frame_size) { + /* In this case, the hardware has overcounted the number of + * oversize frames. + */ + if (stats->roc > 0) + stats->roc--; + } + + /* Adjust the bin counters when the extra byte put the frame in the + * wrong bin. Remember that the frame_len was adjusted above. + */ + if (frame_len == 64) { + stats->prc64++; + stats->prc127--; + } else if (frame_len == 127) { + stats->prc127++; + stats->prc255--; + } else if (frame_len == 255) { + stats->prc255++; + stats->prc511--; + } else if (frame_len == 511) { + stats->prc511++; + stats->prc1023--; + } else if (frame_len == 1023) { + stats->prc1023++; + stats->prc1522--; + } else if (frame_len == 1522) { + stats->prc1522++; + } } -/****************************************************************************** - * Gets the current PCI bus type, speed, and width of the hardware +/** + * e1000_get_bus_info + * @hw: Struct containing variables accessed by shared code * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ + * Gets the current PCI bus type, speed, and width of the hardware + */ void e1000_get_bus_info(struct e1000_hw *hw) { - s32 ret_val; - u16 pci_ex_link_status; - u32 status; - - switch (hw->mac_type) { - case e1000_82542_rev2_0: - case e1000_82542_rev2_1: - hw->bus_type = e1000_bus_type_pci; - hw->bus_speed = e1000_bus_speed_unknown; - hw->bus_width = e1000_bus_width_unknown; - break; - case e1000_82571: - case e1000_82572: - case e1000_82573: - case e1000_80003es2lan: - hw->bus_type = e1000_bus_type_pci_express; - hw->bus_speed = e1000_bus_speed_2500; - ret_val = e1000_read_pcie_cap_reg(hw, - PCI_EX_LINK_STATUS, - &pci_ex_link_status); - if (ret_val) - hw->bus_width = e1000_bus_width_unknown; - else - hw->bus_width = (pci_ex_link_status & PCI_EX_LINK_WIDTH_MASK) >> - PCI_EX_LINK_WIDTH_SHIFT; - break; - case e1000_ich8lan: - hw->bus_type = e1000_bus_type_pci_express; - hw->bus_speed = e1000_bus_speed_2500; - hw->bus_width = e1000_bus_width_pciex_1; - break; - default: - status = er32(STATUS); - hw->bus_type = (status & E1000_STATUS_PCIX_MODE) ? - e1000_bus_type_pcix : e1000_bus_type_pci; - - if (hw->device_id == E1000_DEV_ID_82546EB_QUAD_COPPER) { - hw->bus_speed = (hw->bus_type == e1000_bus_type_pci) ? - e1000_bus_speed_66 : e1000_bus_speed_120; - } else if (hw->bus_type == e1000_bus_type_pci) { - hw->bus_speed = (status & E1000_STATUS_PCI66) ? - e1000_bus_speed_66 : e1000_bus_speed_33; - } else { - switch (status & E1000_STATUS_PCIX_SPEED) { - case E1000_STATUS_PCIX_SPEED_66: - hw->bus_speed = e1000_bus_speed_66; - break; - case E1000_STATUS_PCIX_SPEED_100: - hw->bus_speed = e1000_bus_speed_100; - break; - case E1000_STATUS_PCIX_SPEED_133: - hw->bus_speed = e1000_bus_speed_133; - break; - default: - hw->bus_speed = e1000_bus_speed_reserved; - break; - } - } - hw->bus_width = (status & E1000_STATUS_BUS64) ? - e1000_bus_width_64 : e1000_bus_width_32; - break; - } + u32 status; + + switch (hw->mac_type) { + case e1000_82542_rev2_0: + case e1000_82542_rev2_1: + hw->bus_type = e1000_bus_type_pci; + hw->bus_speed = e1000_bus_speed_unknown; + hw->bus_width = e1000_bus_width_unknown; + break; + default: + status = er32(STATUS); + hw->bus_type = (status & E1000_STATUS_PCIX_MODE) ? + e1000_bus_type_pcix : e1000_bus_type_pci; + + if (hw->device_id == E1000_DEV_ID_82546EB_QUAD_COPPER) { + hw->bus_speed = (hw->bus_type == e1000_bus_type_pci) ? + e1000_bus_speed_66 : e1000_bus_speed_120; + } else if (hw->bus_type == e1000_bus_type_pci) { + hw->bus_speed = (status & E1000_STATUS_PCI66) ? + e1000_bus_speed_66 : e1000_bus_speed_33; + } else { + switch (status & E1000_STATUS_PCIX_SPEED) { + case E1000_STATUS_PCIX_SPEED_66: + hw->bus_speed = e1000_bus_speed_66; + break; + case E1000_STATUS_PCIX_SPEED_100: + hw->bus_speed = e1000_bus_speed_100; + break; + case E1000_STATUS_PCIX_SPEED_133: + hw->bus_speed = e1000_bus_speed_133; + break; + default: + hw->bus_speed = e1000_bus_speed_reserved; + break; + } + } + hw->bus_width = (status & E1000_STATUS_BUS64) ? + e1000_bus_width_64 : e1000_bus_width_32; + break; + } } -/****************************************************************************** +/** + * e1000_write_reg_io + * @hw: Struct containing variables accessed by shared code + * @offset: offset to write to + * @value: value to write + * * Writes a value to one of the devices registers using port I/O (as opposed to * memory mapped I/O). Only 82544 and newer devices support port I/O. - * - * hw - Struct containing variables accessed by shared code - * offset - offset to write to - * value - value to write - *****************************************************************************/ + */ static void e1000_write_reg_io(struct e1000_hw *hw, u32 offset, u32 value) { - unsigned long io_addr = hw->io_base; - unsigned long io_data = hw->io_base + 4; + unsigned long io_addr = hw->io_base; + unsigned long io_data = hw->io_base + 4; - e1000_io_write(hw, io_addr, offset); - e1000_io_write(hw, io_data, value); + e1000_io_write(hw, io_addr, offset); + e1000_io_write(hw, io_data, value); } -/****************************************************************************** - * Estimates the cable length. - * - * hw - Struct containing variables accessed by shared code - * min_length - The estimated minimum length - * max_length - The estimated maximum length +/** + * e1000_get_cable_length - Estimates the cable length. + * @hw: Struct containing variables accessed by shared code + * @min_length: The estimated minimum length + * @max_length: The estimated maximum length * * returns: - E1000_ERR_XXX * E1000_SUCCESS @@ -6528,185 +4842,115 @@ static void e1000_write_reg_io(struct e1000_hw *hw, u32 offset, u32 value) * So for M88 phy's, this function interprets the one value returned from the * register to the minimum and maximum range. * For IGP phy's, the function calculates the range by the AGC registers. - *****************************************************************************/ + */ static s32 e1000_get_cable_length(struct e1000_hw *hw, u16 *min_length, u16 *max_length) { - s32 ret_val; - u16 agc_value = 0; - u16 i, phy_data; - u16 cable_length; - - DEBUGFUNC("e1000_get_cable_length"); - - *min_length = *max_length = 0; - - /* Use old method for Phy older than IGP */ - if (hw->phy_type == e1000_phy_m88) { - - ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, - &phy_data); - if (ret_val) - return ret_val; - cable_length = (phy_data & M88E1000_PSSR_CABLE_LENGTH) >> - M88E1000_PSSR_CABLE_LENGTH_SHIFT; - - /* Convert the enum value to ranged values */ - switch (cable_length) { - case e1000_cable_length_50: - *min_length = 0; - *max_length = e1000_igp_cable_length_50; - break; - case e1000_cable_length_50_80: - *min_length = e1000_igp_cable_length_50; - *max_length = e1000_igp_cable_length_80; - break; - case e1000_cable_length_80_110: - *min_length = e1000_igp_cable_length_80; - *max_length = e1000_igp_cable_length_110; - break; - case e1000_cable_length_110_140: - *min_length = e1000_igp_cable_length_110; - *max_length = e1000_igp_cable_length_140; - break; - case e1000_cable_length_140: - *min_length = e1000_igp_cable_length_140; - *max_length = e1000_igp_cable_length_170; - break; - default: - return -E1000_ERR_PHY; - break; - } - } else if (hw->phy_type == e1000_phy_gg82563) { - ret_val = e1000_read_phy_reg(hw, GG82563_PHY_DSP_DISTANCE, - &phy_data); - if (ret_val) - return ret_val; - cable_length = phy_data & GG82563_DSPD_CABLE_LENGTH; - - switch (cable_length) { - case e1000_gg_cable_length_60: - *min_length = 0; - *max_length = e1000_igp_cable_length_60; - break; - case e1000_gg_cable_length_60_115: - *min_length = e1000_igp_cable_length_60; - *max_length = e1000_igp_cable_length_115; - break; - case e1000_gg_cable_length_115_150: - *min_length = e1000_igp_cable_length_115; - *max_length = e1000_igp_cable_length_150; - break; - case e1000_gg_cable_length_150: - *min_length = e1000_igp_cable_length_150; - *max_length = e1000_igp_cable_length_180; - break; - default: - return -E1000_ERR_PHY; - break; - } - } else if (hw->phy_type == e1000_phy_igp) { /* For IGP PHY */ - u16 cur_agc_value; - u16 min_agc_value = IGP01E1000_AGC_LENGTH_TABLE_SIZE; - u16 agc_reg_array[IGP01E1000_PHY_CHANNEL_NUM] = - {IGP01E1000_PHY_AGC_A, - IGP01E1000_PHY_AGC_B, - IGP01E1000_PHY_AGC_C, - IGP01E1000_PHY_AGC_D}; - /* Read the AGC registers for all channels */ - for (i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) { - - ret_val = e1000_read_phy_reg(hw, agc_reg_array[i], &phy_data); - if (ret_val) - return ret_val; - - cur_agc_value = phy_data >> IGP01E1000_AGC_LENGTH_SHIFT; - - /* Value bound check. */ - if ((cur_agc_value >= IGP01E1000_AGC_LENGTH_TABLE_SIZE - 1) || - (cur_agc_value == 0)) - return -E1000_ERR_PHY; - - agc_value += cur_agc_value; - - /* Update minimal AGC value. */ - if (min_agc_value > cur_agc_value) - min_agc_value = cur_agc_value; - } - - /* Remove the minimal AGC result for length < 50m */ - if (agc_value < IGP01E1000_PHY_CHANNEL_NUM * e1000_igp_cable_length_50) { - agc_value -= min_agc_value; - - /* Get the average length of the remaining 3 channels */ - agc_value /= (IGP01E1000_PHY_CHANNEL_NUM - 1); - } else { - /* Get the average length of all the 4 channels. */ - agc_value /= IGP01E1000_PHY_CHANNEL_NUM; - } - - /* Set the range of the calculated length. */ - *min_length = ((e1000_igp_cable_length_table[agc_value] - - IGP01E1000_AGC_RANGE) > 0) ? - (e1000_igp_cable_length_table[agc_value] - - IGP01E1000_AGC_RANGE) : 0; - *max_length = e1000_igp_cable_length_table[agc_value] + - IGP01E1000_AGC_RANGE; - } else if (hw->phy_type == e1000_phy_igp_2 || - hw->phy_type == e1000_phy_igp_3) { - u16 cur_agc_index, max_agc_index = 0; - u16 min_agc_index = IGP02E1000_AGC_LENGTH_TABLE_SIZE - 1; - u16 agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] = - {IGP02E1000_PHY_AGC_A, - IGP02E1000_PHY_AGC_B, - IGP02E1000_PHY_AGC_C, - IGP02E1000_PHY_AGC_D}; - /* Read the AGC registers for all channels */ - for (i = 0; i < IGP02E1000_PHY_CHANNEL_NUM; i++) { - ret_val = e1000_read_phy_reg(hw, agc_reg_array[i], &phy_data); - if (ret_val) - return ret_val; - - /* Getting bits 15:9, which represent the combination of course and - * fine gain values. The result is a number that can be put into - * the lookup table to obtain the approximate cable length. */ - cur_agc_index = (phy_data >> IGP02E1000_AGC_LENGTH_SHIFT) & - IGP02E1000_AGC_LENGTH_MASK; - - /* Array index bound check. */ - if ((cur_agc_index >= IGP02E1000_AGC_LENGTH_TABLE_SIZE) || - (cur_agc_index == 0)) - return -E1000_ERR_PHY; - - /* Remove min & max AGC values from calculation. */ - if (e1000_igp_2_cable_length_table[min_agc_index] > - e1000_igp_2_cable_length_table[cur_agc_index]) - min_agc_index = cur_agc_index; - if (e1000_igp_2_cable_length_table[max_agc_index] < - e1000_igp_2_cable_length_table[cur_agc_index]) - max_agc_index = cur_agc_index; - - agc_value += e1000_igp_2_cable_length_table[cur_agc_index]; - } - - agc_value -= (e1000_igp_2_cable_length_table[min_agc_index] + - e1000_igp_2_cable_length_table[max_agc_index]); - agc_value /= (IGP02E1000_PHY_CHANNEL_NUM - 2); - - /* Calculate cable length with the error range of +/- 10 meters. */ - *min_length = ((agc_value - IGP02E1000_AGC_RANGE) > 0) ? - (agc_value - IGP02E1000_AGC_RANGE) : 0; - *max_length = agc_value + IGP02E1000_AGC_RANGE; - } - - return E1000_SUCCESS; + s32 ret_val; + u16 agc_value = 0; + u16 i, phy_data; + u16 cable_length; + + DEBUGFUNC("e1000_get_cable_length"); + + *min_length = *max_length = 0; + + /* Use old method for Phy older than IGP */ + if (hw->phy_type == e1000_phy_m88) { + + ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, + &phy_data); + if (ret_val) + return ret_val; + cable_length = (phy_data & M88E1000_PSSR_CABLE_LENGTH) >> + M88E1000_PSSR_CABLE_LENGTH_SHIFT; + + /* Convert the enum value to ranged values */ + switch (cable_length) { + case e1000_cable_length_50: + *min_length = 0; + *max_length = e1000_igp_cable_length_50; + break; + case e1000_cable_length_50_80: + *min_length = e1000_igp_cable_length_50; + *max_length = e1000_igp_cable_length_80; + break; + case e1000_cable_length_80_110: + *min_length = e1000_igp_cable_length_80; + *max_length = e1000_igp_cable_length_110; + break; + case e1000_cable_length_110_140: + *min_length = e1000_igp_cable_length_110; + *max_length = e1000_igp_cable_length_140; + break; + case e1000_cable_length_140: + *min_length = e1000_igp_cable_length_140; + *max_length = e1000_igp_cable_length_170; + break; + default: + return -E1000_ERR_PHY; + break; + } + } else if (hw->phy_type == e1000_phy_igp) { /* For IGP PHY */ + u16 cur_agc_value; + u16 min_agc_value = IGP01E1000_AGC_LENGTH_TABLE_SIZE; + u16 agc_reg_array[IGP01E1000_PHY_CHANNEL_NUM] = + { IGP01E1000_PHY_AGC_A, + IGP01E1000_PHY_AGC_B, + IGP01E1000_PHY_AGC_C, + IGP01E1000_PHY_AGC_D + }; + /* Read the AGC registers for all channels */ + for (i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) { + + ret_val = + e1000_read_phy_reg(hw, agc_reg_array[i], &phy_data); + if (ret_val) + return ret_val; + + cur_agc_value = phy_data >> IGP01E1000_AGC_LENGTH_SHIFT; + + /* Value bound check. */ + if ((cur_agc_value >= + IGP01E1000_AGC_LENGTH_TABLE_SIZE - 1) + || (cur_agc_value == 0)) + return -E1000_ERR_PHY; + + agc_value += cur_agc_value; + + /* Update minimal AGC value. */ + if (min_agc_value > cur_agc_value) + min_agc_value = cur_agc_value; + } + + /* Remove the minimal AGC result for length < 50m */ + if (agc_value < + IGP01E1000_PHY_CHANNEL_NUM * e1000_igp_cable_length_50) { + agc_value -= min_agc_value; + + /* Get the average length of the remaining 3 channels */ + agc_value /= (IGP01E1000_PHY_CHANNEL_NUM - 1); + } else { + /* Get the average length of all the 4 channels. */ + agc_value /= IGP01E1000_PHY_CHANNEL_NUM; + } + + /* Set the range of the calculated length. */ + *min_length = ((e1000_igp_cable_length_table[agc_value] - + IGP01E1000_AGC_RANGE) > 0) ? + (e1000_igp_cable_length_table[agc_value] - + IGP01E1000_AGC_RANGE) : 0; + *max_length = e1000_igp_cable_length_table[agc_value] + + IGP01E1000_AGC_RANGE; + } + + return E1000_SUCCESS; } -/****************************************************************************** - * Check the cable polarity - * - * hw - Struct containing variables accessed by shared code - * polarity - output parameter : 0 - Polarity is not reversed +/** + * e1000_check_polarity - Check the cable polarity + * @hw: Struct containing variables accessed by shared code + * @polarity: output parameter : 0 - Polarity is not reversed * 1 - Polarity is reversed. * * returns: - E1000_ERR_XXX @@ -6717,73 +4961,65 @@ static s32 e1000_get_cable_length(struct e1000_hw *hw, u16 *min_length, * 10 Mbps. If the link speed is 100 Mbps there is no polarity so this bit will * return 0. If the link speed is 1000 Mbps the polarity status is in the * IGP01E1000_PHY_PCS_INIT_REG. - *****************************************************************************/ + */ static s32 e1000_check_polarity(struct e1000_hw *hw, e1000_rev_polarity *polarity) { - s32 ret_val; - u16 phy_data; - - DEBUGFUNC("e1000_check_polarity"); - - if ((hw->phy_type == e1000_phy_m88) || - (hw->phy_type == e1000_phy_gg82563)) { - /* return the Polarity bit in the Status register. */ - ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, - &phy_data); - if (ret_val) - return ret_val; - *polarity = ((phy_data & M88E1000_PSSR_REV_POLARITY) >> - M88E1000_PSSR_REV_POLARITY_SHIFT) ? - e1000_rev_polarity_reversed : e1000_rev_polarity_normal; - - } else if (hw->phy_type == e1000_phy_igp || - hw->phy_type == e1000_phy_igp_3 || - hw->phy_type == e1000_phy_igp_2) { - /* Read the Status register to check the speed */ - ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_STATUS, - &phy_data); - if (ret_val) - return ret_val; - - /* If speed is 1000 Mbps, must read the IGP01E1000_PHY_PCS_INIT_REG to - * find the polarity status */ - if ((phy_data & IGP01E1000_PSSR_SPEED_MASK) == - IGP01E1000_PSSR_SPEED_1000MBPS) { - - /* Read the GIG initialization PCS register (0x00B4) */ - ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PCS_INIT_REG, - &phy_data); - if (ret_val) - return ret_val; - - /* Check the polarity bits */ - *polarity = (phy_data & IGP01E1000_PHY_POLARITY_MASK) ? - e1000_rev_polarity_reversed : e1000_rev_polarity_normal; - } else { - /* For 10 Mbps, read the polarity bit in the status register. (for - * 100 Mbps this bit is always 0) */ - *polarity = (phy_data & IGP01E1000_PSSR_POLARITY_REVERSED) ? - e1000_rev_polarity_reversed : e1000_rev_polarity_normal; - } - } else if (hw->phy_type == e1000_phy_ife) { - ret_val = e1000_read_phy_reg(hw, IFE_PHY_EXTENDED_STATUS_CONTROL, - &phy_data); - if (ret_val) - return ret_val; - *polarity = ((phy_data & IFE_PESC_POLARITY_REVERSED) >> - IFE_PESC_POLARITY_REVERSED_SHIFT) ? - e1000_rev_polarity_reversed : e1000_rev_polarity_normal; - } - return E1000_SUCCESS; + s32 ret_val; + u16 phy_data; + + DEBUGFUNC("e1000_check_polarity"); + + if (hw->phy_type == e1000_phy_m88) { + /* return the Polarity bit in the Status register. */ + ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, + &phy_data); + if (ret_val) + return ret_val; + *polarity = ((phy_data & M88E1000_PSSR_REV_POLARITY) >> + M88E1000_PSSR_REV_POLARITY_SHIFT) ? + e1000_rev_polarity_reversed : e1000_rev_polarity_normal; + + } else if (hw->phy_type == e1000_phy_igp) { + /* Read the Status register to check the speed */ + ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_STATUS, + &phy_data); + if (ret_val) + return ret_val; + + /* If speed is 1000 Mbps, must read the IGP01E1000_PHY_PCS_INIT_REG to + * find the polarity status */ + if ((phy_data & IGP01E1000_PSSR_SPEED_MASK) == + IGP01E1000_PSSR_SPEED_1000MBPS) { + + /* Read the GIG initialization PCS register (0x00B4) */ + ret_val = + e1000_read_phy_reg(hw, IGP01E1000_PHY_PCS_INIT_REG, + &phy_data); + if (ret_val) + return ret_val; + + /* Check the polarity bits */ + *polarity = (phy_data & IGP01E1000_PHY_POLARITY_MASK) ? + e1000_rev_polarity_reversed : + e1000_rev_polarity_normal; + } else { + /* For 10 Mbps, read the polarity bit in the status register. (for + * 100 Mbps this bit is always 0) */ + *polarity = + (phy_data & IGP01E1000_PSSR_POLARITY_REVERSED) ? + e1000_rev_polarity_reversed : + e1000_rev_polarity_normal; + } + } + return E1000_SUCCESS; } -/****************************************************************************** - * Check if Downshift occured - * - * hw - Struct containing variables accessed by shared code - * downshift - output parameter : 0 - No Downshift ocured. - * 1 - Downshift ocured. +/** + * e1000_check_downshift - Check if Downshift occurred + * @hw: Struct containing variables accessed by shared code + * @downshift: output parameter : 0 - No Downshift occurred. + * 1 - Downshift occurred. * * returns: - E1000_ERR_XXX * E1000_SUCCESS @@ -6792,2041 +5028,607 @@ static s32 e1000_check_polarity(struct e1000_hw *hw, * Specific Status register. For IGP phy's, it reads the Downgrade bit in the * Link Health register. In IGP this bit is latched high, so the driver must * read it immediately after link is established. - *****************************************************************************/ + */ static s32 e1000_check_downshift(struct e1000_hw *hw) { - s32 ret_val; - u16 phy_data; - - DEBUGFUNC("e1000_check_downshift"); - - if (hw->phy_type == e1000_phy_igp || - hw->phy_type == e1000_phy_igp_3 || - hw->phy_type == e1000_phy_igp_2) { - ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_LINK_HEALTH, - &phy_data); - if (ret_val) - return ret_val; - - hw->speed_downgraded = (phy_data & IGP01E1000_PLHR_SS_DOWNGRADE) ? 1 : 0; - } else if ((hw->phy_type == e1000_phy_m88) || - (hw->phy_type == e1000_phy_gg82563)) { - ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, - &phy_data); - if (ret_val) - return ret_val; - - hw->speed_downgraded = (phy_data & M88E1000_PSSR_DOWNSHIFT) >> - M88E1000_PSSR_DOWNSHIFT_SHIFT; - } else if (hw->phy_type == e1000_phy_ife) { - /* e1000_phy_ife supports 10/100 speed only */ - hw->speed_downgraded = false; - } - - return E1000_SUCCESS; -} + s32 ret_val; + u16 phy_data; -/***************************************************************************** - * - * 82541_rev_2 & 82547_rev_2 have the capability to configure the DSP when a - * gigabit link is achieved to improve link quality. - * - * hw: Struct containing variables accessed by shared code - * - * returns: - E1000_ERR_PHY if fail to read/write the PHY - * E1000_SUCCESS at any other case. - * - ****************************************************************************/ + DEBUGFUNC("e1000_check_downshift"); -static s32 e1000_config_dsp_after_link_change(struct e1000_hw *hw, bool link_up) -{ - s32 ret_val; - u16 phy_data, phy_saved_data, speed, duplex, i; - u16 dsp_reg_array[IGP01E1000_PHY_CHANNEL_NUM] = - {IGP01E1000_PHY_AGC_PARAM_A, - IGP01E1000_PHY_AGC_PARAM_B, - IGP01E1000_PHY_AGC_PARAM_C, - IGP01E1000_PHY_AGC_PARAM_D}; - u16 min_length, max_length; - - DEBUGFUNC("e1000_config_dsp_after_link_change"); - - if (hw->phy_type != e1000_phy_igp) - return E1000_SUCCESS; - - if (link_up) { - ret_val = e1000_get_speed_and_duplex(hw, &speed, &duplex); - if (ret_val) { - DEBUGOUT("Error getting link speed and duplex\n"); - return ret_val; - } - - if (speed == SPEED_1000) { - - ret_val = e1000_get_cable_length(hw, &min_length, &max_length); - if (ret_val) - return ret_val; - - if ((hw->dsp_config_state == e1000_dsp_config_enabled) && - min_length >= e1000_igp_cable_length_50) { - - for (i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) { - ret_val = e1000_read_phy_reg(hw, dsp_reg_array[i], - &phy_data); - if (ret_val) - return ret_val; - - phy_data &= ~IGP01E1000_PHY_EDAC_MU_INDEX; - - ret_val = e1000_write_phy_reg(hw, dsp_reg_array[i], - phy_data); - if (ret_val) - return ret_val; - } - hw->dsp_config_state = e1000_dsp_config_activated; - } - - if ((hw->ffe_config_state == e1000_ffe_config_enabled) && - (min_length < e1000_igp_cable_length_50)) { - - u16 ffe_idle_err_timeout = FFE_IDLE_ERR_COUNT_TIMEOUT_20; - u32 idle_errs = 0; - - /* clear previous idle error counts */ - ret_val = e1000_read_phy_reg(hw, PHY_1000T_STATUS, - &phy_data); - if (ret_val) - return ret_val; - - for (i = 0; i < ffe_idle_err_timeout; i++) { - udelay(1000); - ret_val = e1000_read_phy_reg(hw, PHY_1000T_STATUS, - &phy_data); - if (ret_val) - return ret_val; - - idle_errs += (phy_data & SR_1000T_IDLE_ERROR_CNT); - if (idle_errs > SR_1000T_PHY_EXCESSIVE_IDLE_ERR_COUNT) { - hw->ffe_config_state = e1000_ffe_config_active; - - ret_val = e1000_write_phy_reg(hw, - IGP01E1000_PHY_DSP_FFE, - IGP01E1000_PHY_DSP_FFE_CM_CP); - if (ret_val) - return ret_val; - break; - } - - if (idle_errs) - ffe_idle_err_timeout = FFE_IDLE_ERR_COUNT_TIMEOUT_100; - } - } - } - } else { - if (hw->dsp_config_state == e1000_dsp_config_activated) { - /* Save off the current value of register 0x2F5B to be restored at - * the end of the routines. */ - ret_val = e1000_read_phy_reg(hw, 0x2F5B, &phy_saved_data); - - if (ret_val) - return ret_val; - - /* Disable the PHY transmitter */ - ret_val = e1000_write_phy_reg(hw, 0x2F5B, 0x0003); - - if (ret_val) - return ret_val; - - mdelay(20); - - ret_val = e1000_write_phy_reg(hw, 0x0000, - IGP01E1000_IEEE_FORCE_GIGA); - if (ret_val) - return ret_val; - for (i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) { - ret_val = e1000_read_phy_reg(hw, dsp_reg_array[i], &phy_data); - if (ret_val) - return ret_val; - - phy_data &= ~IGP01E1000_PHY_EDAC_MU_INDEX; - phy_data |= IGP01E1000_PHY_EDAC_SIGN_EXT_9_BITS; - - ret_val = e1000_write_phy_reg(hw,dsp_reg_array[i], phy_data); - if (ret_val) - return ret_val; - } - - ret_val = e1000_write_phy_reg(hw, 0x0000, - IGP01E1000_IEEE_RESTART_AUTONEG); - if (ret_val) - return ret_val; - - mdelay(20); - - /* Now enable the transmitter */ - ret_val = e1000_write_phy_reg(hw, 0x2F5B, phy_saved_data); - - if (ret_val) - return ret_val; - - hw->dsp_config_state = e1000_dsp_config_enabled; - } - - if (hw->ffe_config_state == e1000_ffe_config_active) { - /* Save off the current value of register 0x2F5B to be restored at - * the end of the routines. */ - ret_val = e1000_read_phy_reg(hw, 0x2F5B, &phy_saved_data); - - if (ret_val) - return ret_val; - - /* Disable the PHY transmitter */ - ret_val = e1000_write_phy_reg(hw, 0x2F5B, 0x0003); - - if (ret_val) - return ret_val; - - mdelay(20); - - ret_val = e1000_write_phy_reg(hw, 0x0000, - IGP01E1000_IEEE_FORCE_GIGA); - if (ret_val) - return ret_val; - ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_DSP_FFE, - IGP01E1000_PHY_DSP_FFE_DEFAULT); - if (ret_val) - return ret_val; - - ret_val = e1000_write_phy_reg(hw, 0x0000, - IGP01E1000_IEEE_RESTART_AUTONEG); - if (ret_val) - return ret_val; - - mdelay(20); - - /* Now enable the transmitter */ - ret_val = e1000_write_phy_reg(hw, 0x2F5B, phy_saved_data); - - if (ret_val) - return ret_val; - - hw->ffe_config_state = e1000_ffe_config_enabled; - } - } - return E1000_SUCCESS; -} + if (hw->phy_type == e1000_phy_igp) { + ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_LINK_HEALTH, + &phy_data); + if (ret_val) + return ret_val; -/***************************************************************************** - * Set PHY to class A mode - * Assumes the following operations will follow to enable the new class mode. - * 1. Do a PHY soft reset - * 2. Restart auto-negotiation or force link. - * - * hw - Struct containing variables accessed by shared code - ****************************************************************************/ -static s32 e1000_set_phy_mode(struct e1000_hw *hw) -{ - s32 ret_val; - u16 eeprom_data; - - DEBUGFUNC("e1000_set_phy_mode"); - - if ((hw->mac_type == e1000_82545_rev_3) && - (hw->media_type == e1000_media_type_copper)) { - ret_val = e1000_read_eeprom(hw, EEPROM_PHY_CLASS_WORD, 1, &eeprom_data); - if (ret_val) { - return ret_val; - } - - if ((eeprom_data != EEPROM_RESERVED_WORD) && - (eeprom_data & EEPROM_PHY_CLASS_A)) { - ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x000B); - if (ret_val) - return ret_val; - ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0x8104); - if (ret_val) - return ret_val; - - hw->phy_reset_disable = false; - } - } - - return E1000_SUCCESS; -} + hw->speed_downgraded = + (phy_data & IGP01E1000_PLHR_SS_DOWNGRADE) ? 1 : 0; + } else if (hw->phy_type == e1000_phy_m88) { + ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, + &phy_data); + if (ret_val) + return ret_val; -/***************************************************************************** - * - * This function sets the lplu state according to the active flag. When - * activating lplu this function also disables smart speed and vise versa. - * lplu will not be activated unless the device autonegotiation advertisment - * meets standards of either 10 or 10/100 or 10/100/1000 at all duplexes. - * hw: Struct containing variables accessed by shared code - * active - true to enable lplu false to disable lplu. - * - * returns: - E1000_ERR_PHY if fail to read/write the PHY - * E1000_SUCCESS at any other case. - * - ****************************************************************************/ + hw->speed_downgraded = (phy_data & M88E1000_PSSR_DOWNSHIFT) >> + M88E1000_PSSR_DOWNSHIFT_SHIFT; + } -static s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active) -{ - u32 phy_ctrl = 0; - s32 ret_val; - u16 phy_data; - DEBUGFUNC("e1000_set_d3_lplu_state"); - - if (hw->phy_type != e1000_phy_igp && hw->phy_type != e1000_phy_igp_2 - && hw->phy_type != e1000_phy_igp_3) - return E1000_SUCCESS; - - /* During driver activity LPLU should not be used or it will attain link - * from the lowest speeds starting from 10Mbps. The capability is used for - * Dx transitions and states */ - if (hw->mac_type == e1000_82541_rev_2 || hw->mac_type == e1000_82547_rev_2) { - ret_val = e1000_read_phy_reg(hw, IGP01E1000_GMII_FIFO, &phy_data); - if (ret_val) - return ret_val; - } else if (hw->mac_type == e1000_ich8lan) { - /* MAC writes into PHY register based on the state transition - * and start auto-negotiation. SW driver can overwrite the settings - * in CSR PHY power control E1000_PHY_CTRL register. */ - phy_ctrl = er32(PHY_CTRL); - } else { - ret_val = e1000_read_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, &phy_data); - if (ret_val) - return ret_val; - } - - if (!active) { - if (hw->mac_type == e1000_82541_rev_2 || - hw->mac_type == e1000_82547_rev_2) { - phy_data &= ~IGP01E1000_GMII_FLEX_SPD; - ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO, phy_data); - if (ret_val) - return ret_val; - } else { - if (hw->mac_type == e1000_ich8lan) { - phy_ctrl &= ~E1000_PHY_CTRL_NOND0A_LPLU; - ew32(PHY_CTRL, phy_ctrl); - } else { - phy_data &= ~IGP02E1000_PM_D3_LPLU; - ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, - phy_data); - if (ret_val) - return ret_val; - } - } - - /* LPLU and SmartSpeed are mutually exclusive. LPLU is used during - * Dx states where the power conservation is most important. During - * driver activity we should enable SmartSpeed, so performance is - * maintained. */ - if (hw->smart_speed == e1000_smart_speed_on) { - ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, - &phy_data); - if (ret_val) - return ret_val; - - phy_data |= IGP01E1000_PSCFR_SMART_SPEED; - ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, - phy_data); - if (ret_val) - return ret_val; - } else if (hw->smart_speed == e1000_smart_speed_off) { - ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, - &phy_data); - if (ret_val) - return ret_val; - - phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED; - ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, - phy_data); - if (ret_val) - return ret_val; - } - - } else if ((hw->autoneg_advertised == AUTONEG_ADVERTISE_SPEED_DEFAULT) || - (hw->autoneg_advertised == AUTONEG_ADVERTISE_10_ALL ) || - (hw->autoneg_advertised == AUTONEG_ADVERTISE_10_100_ALL)) { - - if (hw->mac_type == e1000_82541_rev_2 || - hw->mac_type == e1000_82547_rev_2) { - phy_data |= IGP01E1000_GMII_FLEX_SPD; - ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO, phy_data); - if (ret_val) - return ret_val; - } else { - if (hw->mac_type == e1000_ich8lan) { - phy_ctrl |= E1000_PHY_CTRL_NOND0A_LPLU; - ew32(PHY_CTRL, phy_ctrl); - } else { - phy_data |= IGP02E1000_PM_D3_LPLU; - ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, - phy_data); - if (ret_val) - return ret_val; - } - } - - /* When LPLU is enabled we should disable SmartSpeed */ - ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, &phy_data); - if (ret_val) - return ret_val; - - phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED; - ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, phy_data); - if (ret_val) - return ret_val; - - } - return E1000_SUCCESS; + return E1000_SUCCESS; } -/***************************************************************************** - * - * This function sets the lplu d0 state according to the active flag. When - * activating lplu this function also disables smart speed and vise versa. - * lplu will not be activated unless the device autonegotiation advertisment - * meets standards of either 10 or 10/100 or 10/100/1000 at all duplexes. - * hw: Struct containing variables accessed by shared code - * active - true to enable lplu false to disable lplu. +/** + * e1000_config_dsp_after_link_change + * @hw: Struct containing variables accessed by shared code + * @link_up: was link up at the time this was called * * returns: - E1000_ERR_PHY if fail to read/write the PHY * E1000_SUCCESS at any other case. * - ****************************************************************************/ - -static s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active) -{ - u32 phy_ctrl = 0; - s32 ret_val; - u16 phy_data; - DEBUGFUNC("e1000_set_d0_lplu_state"); - - if (hw->mac_type <= e1000_82547_rev_2) - return E1000_SUCCESS; - - if (hw->mac_type == e1000_ich8lan) { - phy_ctrl = er32(PHY_CTRL); - } else { - ret_val = e1000_read_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, &phy_data); - if (ret_val) - return ret_val; - } - - if (!active) { - if (hw->mac_type == e1000_ich8lan) { - phy_ctrl &= ~E1000_PHY_CTRL_D0A_LPLU; - ew32(PHY_CTRL, phy_ctrl); - } else { - phy_data &= ~IGP02E1000_PM_D0_LPLU; - ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, phy_data); - if (ret_val) - return ret_val; - } - - /* LPLU and SmartSpeed are mutually exclusive. LPLU is used during - * Dx states where the power conservation is most important. During - * driver activity we should enable SmartSpeed, so performance is - * maintained. */ - if (hw->smart_speed == e1000_smart_speed_on) { - ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, - &phy_data); - if (ret_val) - return ret_val; - - phy_data |= IGP01E1000_PSCFR_SMART_SPEED; - ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, - phy_data); - if (ret_val) - return ret_val; - } else if (hw->smart_speed == e1000_smart_speed_off) { - ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, - &phy_data); - if (ret_val) - return ret_val; - - phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED; - ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, - phy_data); - if (ret_val) - return ret_val; - } - - - } else { - - if (hw->mac_type == e1000_ich8lan) { - phy_ctrl |= E1000_PHY_CTRL_D0A_LPLU; - ew32(PHY_CTRL, phy_ctrl); - } else { - phy_data |= IGP02E1000_PM_D0_LPLU; - ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, phy_data); - if (ret_val) - return ret_val; - } - - /* When LPLU is enabled we should disable SmartSpeed */ - ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, &phy_data); - if (ret_val) - return ret_val; - - phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED; - ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, phy_data); - if (ret_val) - return ret_val; - - } - return E1000_SUCCESS; -} + * 82541_rev_2 & 82547_rev_2 have the capability to configure the DSP when a + * gigabit link is achieved to improve link quality. + */ -/****************************************************************************** - * Change VCO speed register to improve Bit Error Rate performance of SERDES. - * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ -static s32 e1000_set_vco_speed(struct e1000_hw *hw) +static s32 e1000_config_dsp_after_link_change(struct e1000_hw *hw, bool link_up) { - s32 ret_val; - u16 default_page = 0; - u16 phy_data; - - DEBUGFUNC("e1000_set_vco_speed"); + s32 ret_val; + u16 phy_data, phy_saved_data, speed, duplex, i; + u16 dsp_reg_array[IGP01E1000_PHY_CHANNEL_NUM] = + { IGP01E1000_PHY_AGC_PARAM_A, + IGP01E1000_PHY_AGC_PARAM_B, + IGP01E1000_PHY_AGC_PARAM_C, + IGP01E1000_PHY_AGC_PARAM_D + }; + u16 min_length, max_length; + + DEBUGFUNC("e1000_config_dsp_after_link_change"); + + if (hw->phy_type != e1000_phy_igp) + return E1000_SUCCESS; + + if (link_up) { + ret_val = e1000_get_speed_and_duplex(hw, &speed, &duplex); + if (ret_val) { + DEBUGOUT("Error getting link speed and duplex\n"); + return ret_val; + } - switch (hw->mac_type) { - case e1000_82545_rev_3: - case e1000_82546_rev_3: - break; - default: - return E1000_SUCCESS; - } + if (speed == SPEED_1000) { + + ret_val = + e1000_get_cable_length(hw, &min_length, + &max_length); + if (ret_val) + return ret_val; + + if ((hw->dsp_config_state == e1000_dsp_config_enabled) + && min_length >= e1000_igp_cable_length_50) { + + for (i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) { + ret_val = + e1000_read_phy_reg(hw, + dsp_reg_array[i], + &phy_data); + if (ret_val) + return ret_val; + + phy_data &= + ~IGP01E1000_PHY_EDAC_MU_INDEX; + + ret_val = + e1000_write_phy_reg(hw, + dsp_reg_array + [i], phy_data); + if (ret_val) + return ret_val; + } + hw->dsp_config_state = + e1000_dsp_config_activated; + } + + if ((hw->ffe_config_state == e1000_ffe_config_enabled) + && (min_length < e1000_igp_cable_length_50)) { + + u16 ffe_idle_err_timeout = + FFE_IDLE_ERR_COUNT_TIMEOUT_20; + u32 idle_errs = 0; + + /* clear previous idle error counts */ + ret_val = + e1000_read_phy_reg(hw, PHY_1000T_STATUS, + &phy_data); + if (ret_val) + return ret_val; + + for (i = 0; i < ffe_idle_err_timeout; i++) { + udelay(1000); + ret_val = + e1000_read_phy_reg(hw, + PHY_1000T_STATUS, + &phy_data); + if (ret_val) + return ret_val; + + idle_errs += + (phy_data & + SR_1000T_IDLE_ERROR_CNT); + if (idle_errs > + SR_1000T_PHY_EXCESSIVE_IDLE_ERR_COUNT) + { + hw->ffe_config_state = + e1000_ffe_config_active; + + ret_val = + e1000_write_phy_reg(hw, + IGP01E1000_PHY_DSP_FFE, + IGP01E1000_PHY_DSP_FFE_CM_CP); + if (ret_val) + return ret_val; + break; + } + + if (idle_errs) + ffe_idle_err_timeout = + FFE_IDLE_ERR_COUNT_TIMEOUT_100; + } + } + } + } else { + if (hw->dsp_config_state == e1000_dsp_config_activated) { + /* Save off the current value of register 0x2F5B to be restored at + * the end of the routines. */ + ret_val = + e1000_read_phy_reg(hw, 0x2F5B, &phy_saved_data); + + if (ret_val) + return ret_val; + + /* Disable the PHY transmitter */ + ret_val = e1000_write_phy_reg(hw, 0x2F5B, 0x0003); + + if (ret_val) + return ret_val; + + mdelay(20); + + ret_val = e1000_write_phy_reg(hw, 0x0000, + IGP01E1000_IEEE_FORCE_GIGA); + if (ret_val) + return ret_val; + for (i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) { + ret_val = + e1000_read_phy_reg(hw, dsp_reg_array[i], + &phy_data); + if (ret_val) + return ret_val; + + phy_data &= ~IGP01E1000_PHY_EDAC_MU_INDEX; + phy_data |= IGP01E1000_PHY_EDAC_SIGN_EXT_9_BITS; + + ret_val = + e1000_write_phy_reg(hw, dsp_reg_array[i], + phy_data); + if (ret_val) + return ret_val; + } + + ret_val = e1000_write_phy_reg(hw, 0x0000, + IGP01E1000_IEEE_RESTART_AUTONEG); + if (ret_val) + return ret_val; + + mdelay(20); + + /* Now enable the transmitter */ + ret_val = + e1000_write_phy_reg(hw, 0x2F5B, phy_saved_data); + + if (ret_val) + return ret_val; + + hw->dsp_config_state = e1000_dsp_config_enabled; + } - /* Set PHY register 30, page 5, bit 8 to 0 */ + if (hw->ffe_config_state == e1000_ffe_config_active) { + /* Save off the current value of register 0x2F5B to be restored at + * the end of the routines. */ + ret_val = + e1000_read_phy_reg(hw, 0x2F5B, &phy_saved_data); - ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, &default_page); - if (ret_val) - return ret_val; + if (ret_val) + return ret_val; - ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0005); - if (ret_val) - return ret_val; + /* Disable the PHY transmitter */ + ret_val = e1000_write_phy_reg(hw, 0x2F5B, 0x0003); - ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, &phy_data); - if (ret_val) - return ret_val; + if (ret_val) + return ret_val; - phy_data &= ~M88E1000_PHY_VCO_REG_BIT8; - ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, phy_data); - if (ret_val) - return ret_val; + mdelay(20); - /* Set PHY register 30, page 4, bit 11 to 1 */ + ret_val = e1000_write_phy_reg(hw, 0x0000, + IGP01E1000_IEEE_FORCE_GIGA); + if (ret_val) + return ret_val; + ret_val = + e1000_write_phy_reg(hw, IGP01E1000_PHY_DSP_FFE, + IGP01E1000_PHY_DSP_FFE_DEFAULT); + if (ret_val) + return ret_val; - ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0004); - if (ret_val) - return ret_val; + ret_val = e1000_write_phy_reg(hw, 0x0000, + IGP01E1000_IEEE_RESTART_AUTONEG); + if (ret_val) + return ret_val; - ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, &phy_data); - if (ret_val) - return ret_val; + mdelay(20); - phy_data |= M88E1000_PHY_VCO_REG_BIT11; - ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, phy_data); - if (ret_val) - return ret_val; + /* Now enable the transmitter */ + ret_val = + e1000_write_phy_reg(hw, 0x2F5B, phy_saved_data); - ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, default_page); - if (ret_val) - return ret_val; + if (ret_val) + return ret_val; - return E1000_SUCCESS; + hw->ffe_config_state = e1000_ffe_config_enabled; + } + } + return E1000_SUCCESS; } - -/***************************************************************************** - * This function reads the cookie from ARC ram. +/** + * e1000_set_phy_mode - Set PHY to class A mode + * @hw: Struct containing variables accessed by shared code * - * returns: - E1000_SUCCESS . - ****************************************************************************/ -static s32 e1000_host_if_read_cookie(struct e1000_hw *hw, u8 *buffer) + * Assumes the following operations will follow to enable the new class mode. + * 1. Do a PHY soft reset + * 2. Restart auto-negotiation or force link. + */ +static s32 e1000_set_phy_mode(struct e1000_hw *hw) { - u8 i; - u32 offset = E1000_MNG_DHCP_COOKIE_OFFSET; - u8 length = E1000_MNG_DHCP_COOKIE_LENGTH; - - length = (length >> 2); - offset = (offset >> 2); - - for (i = 0; i < length; i++) { - *((u32 *)buffer + i) = - E1000_READ_REG_ARRAY_DWORD(hw, HOST_IF, offset + i); - } - return E1000_SUCCESS; -} + s32 ret_val; + u16 eeprom_data; + DEBUGFUNC("e1000_set_phy_mode"); -/***************************************************************************** - * This function checks whether the HOST IF is enabled for command operaton - * and also checks whether the previous command is completed. - * It busy waits in case of previous command is not completed. - * - * returns: - E1000_ERR_HOST_INTERFACE_COMMAND in case if is not ready or - * timeout - * - E1000_SUCCESS for success. - ****************************************************************************/ -static s32 e1000_mng_enable_host_if(struct e1000_hw *hw) -{ - u32 hicr; - u8 i; - - /* Check that the host interface is enabled. */ - hicr = er32(HICR); - if ((hicr & E1000_HICR_EN) == 0) { - DEBUGOUT("E1000_HOST_EN bit disabled.\n"); - return -E1000_ERR_HOST_INTERFACE_COMMAND; - } - /* check the previous command is completed */ - for (i = 0; i < E1000_MNG_DHCP_COMMAND_TIMEOUT; i++) { - hicr = er32(HICR); - if (!(hicr & E1000_HICR_C)) - break; - mdelay(1); - } - - if (i == E1000_MNG_DHCP_COMMAND_TIMEOUT) { - DEBUGOUT("Previous command timeout failed .\n"); - return -E1000_ERR_HOST_INTERFACE_COMMAND; - } - return E1000_SUCCESS; -} + if ((hw->mac_type == e1000_82545_rev_3) && + (hw->media_type == e1000_media_type_copper)) { + ret_val = + e1000_read_eeprom(hw, EEPROM_PHY_CLASS_WORD, 1, + &eeprom_data); + if (ret_val) { + return ret_val; + } -/***************************************************************************** - * This function writes the buffer content at the offset given on the host if. - * It also does alignment considerations to do the writes in most efficient way. - * Also fills up the sum of the buffer in *buffer parameter. - * - * returns - E1000_SUCCESS for success. - ****************************************************************************/ -static s32 e1000_mng_host_if_write(struct e1000_hw *hw, u8 *buffer, u16 length, - u16 offset, u8 *sum) -{ - u8 *tmp; - u8 *bufptr = buffer; - u32 data = 0; - u16 remaining, i, j, prev_bytes; - - /* sum = only sum of the data and it is not checksum */ - - if (length == 0 || offset + length > E1000_HI_MAX_MNG_DATA_LENGTH) { - return -E1000_ERR_PARAM; - } - - tmp = (u8 *)&data; - prev_bytes = offset & 0x3; - offset &= 0xFFFC; - offset >>= 2; - - if (prev_bytes) { - data = E1000_READ_REG_ARRAY_DWORD(hw, HOST_IF, offset); - for (j = prev_bytes; j < sizeof(u32); j++) { - *(tmp + j) = *bufptr++; - *sum += *(tmp + j); - } - E1000_WRITE_REG_ARRAY_DWORD(hw, HOST_IF, offset, data); - length -= j - prev_bytes; - offset++; - } - - remaining = length & 0x3; - length -= remaining; - - /* Calculate length in DWORDs */ - length >>= 2; - - /* The device driver writes the relevant command block into the - * ram area. */ - for (i = 0; i < length; i++) { - for (j = 0; j < sizeof(u32); j++) { - *(tmp + j) = *bufptr++; - *sum += *(tmp + j); - } - - E1000_WRITE_REG_ARRAY_DWORD(hw, HOST_IF, offset + i, data); - } - if (remaining) { - for (j = 0; j < sizeof(u32); j++) { - if (j < remaining) - *(tmp + j) = *bufptr++; - else - *(tmp + j) = 0; - - *sum += *(tmp + j); - } - E1000_WRITE_REG_ARRAY_DWORD(hw, HOST_IF, offset + i, data); - } - - return E1000_SUCCESS; -} + if ((eeprom_data != EEPROM_RESERVED_WORD) && + (eeprom_data & EEPROM_PHY_CLASS_A)) { + ret_val = + e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, + 0x000B); + if (ret_val) + return ret_val; + ret_val = + e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, + 0x8104); + if (ret_val) + return ret_val; + + hw->phy_reset_disable = false; + } + } + return E1000_SUCCESS; +} -/***************************************************************************** - * This function writes the command header after does the checksum calculation. +/** + * e1000_set_d3_lplu_state - set d3 link power state + * @hw: Struct containing variables accessed by shared code + * @active: true to enable lplu false to disable lplu. + * + * This function sets the lplu state according to the active flag. When + * activating lplu this function also disables smart speed and vise versa. + * lplu will not be activated unless the device autonegotiation advertisement + * meets standards of either 10 or 10/100 or 10/100/1000 at all duplexes. * - * returns - E1000_SUCCESS for success. - ****************************************************************************/ -static s32 e1000_mng_write_cmd_header(struct e1000_hw *hw, - struct e1000_host_mng_command_header *hdr) + * returns: - E1000_ERR_PHY if fail to read/write the PHY + * E1000_SUCCESS at any other case. + */ +static s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active) { - u16 i; - u8 sum; - u8 *buffer; - - /* Write the whole command header structure which includes sum of - * the buffer */ - - u16 length = sizeof(struct e1000_host_mng_command_header); + s32 ret_val; + u16 phy_data; + DEBUGFUNC("e1000_set_d3_lplu_state"); + + if (hw->phy_type != e1000_phy_igp) + return E1000_SUCCESS; + + /* During driver activity LPLU should not be used or it will attain link + * from the lowest speeds starting from 10Mbps. The capability is used for + * Dx transitions and states */ + if (hw->mac_type == e1000_82541_rev_2 + || hw->mac_type == e1000_82547_rev_2) { + ret_val = + e1000_read_phy_reg(hw, IGP01E1000_GMII_FIFO, &phy_data); + if (ret_val) + return ret_val; + } - sum = hdr->checksum; - hdr->checksum = 0; + if (!active) { + if (hw->mac_type == e1000_82541_rev_2 || + hw->mac_type == e1000_82547_rev_2) { + phy_data &= ~IGP01E1000_GMII_FLEX_SPD; + ret_val = + e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO, + phy_data); + if (ret_val) + return ret_val; + } - buffer = (u8 *)hdr; - i = length; - while (i--) - sum += buffer[i]; + /* LPLU and SmartSpeed are mutually exclusive. LPLU is used during + * Dx states where the power conservation is most important. During + * driver activity we should enable SmartSpeed, so performance is + * maintained. */ + if (hw->smart_speed == e1000_smart_speed_on) { + ret_val = + e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, + &phy_data); + if (ret_val) + return ret_val; + + phy_data |= IGP01E1000_PSCFR_SMART_SPEED; + ret_val = + e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, + phy_data); + if (ret_val) + return ret_val; + } else if (hw->smart_speed == e1000_smart_speed_off) { + ret_val = + e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, + &phy_data); + if (ret_val) + return ret_val; + + phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED; + ret_val = + e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, + phy_data); + if (ret_val) + return ret_val; + } + } else if ((hw->autoneg_advertised == AUTONEG_ADVERTISE_SPEED_DEFAULT) + || (hw->autoneg_advertised == AUTONEG_ADVERTISE_10_ALL) + || (hw->autoneg_advertised == + AUTONEG_ADVERTISE_10_100_ALL)) { + + if (hw->mac_type == e1000_82541_rev_2 || + hw->mac_type == e1000_82547_rev_2) { + phy_data |= IGP01E1000_GMII_FLEX_SPD; + ret_val = + e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO, + phy_data); + if (ret_val) + return ret_val; + } - hdr->checksum = 0 - sum; + /* When LPLU is enabled we should disable SmartSpeed */ + ret_val = + e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, + &phy_data); + if (ret_val) + return ret_val; - length >>= 2; - /* The device driver writes the relevant command block into the ram area. */ - for (i = 0; i < length; i++) { - E1000_WRITE_REG_ARRAY_DWORD(hw, HOST_IF, i, *((u32 *)hdr + i)); - E1000_WRITE_FLUSH(); - } + phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED; + ret_val = + e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, + phy_data); + if (ret_val) + return ret_val; - return E1000_SUCCESS; + } + return E1000_SUCCESS; } - -/***************************************************************************** - * This function indicates to ARC that a new command is pending which completes - * one write operation by the driver. +/** + * e1000_set_vco_speed + * @hw: Struct containing variables accessed by shared code * - * returns - E1000_SUCCESS for success. - ****************************************************************************/ -static s32 e1000_mng_write_commit(struct e1000_hw *hw) + * Change VCO speed register to improve Bit Error Rate performance of SERDES. + */ +static s32 e1000_set_vco_speed(struct e1000_hw *hw) { - u32 hicr; + s32 ret_val; + u16 default_page = 0; + u16 phy_data; - hicr = er32(HICR); - /* Setting this bit tells the ARC that a new command is pending. */ - ew32(HICR, hicr | E1000_HICR_C); + DEBUGFUNC("e1000_set_vco_speed"); - return E1000_SUCCESS; -} + switch (hw->mac_type) { + case e1000_82545_rev_3: + case e1000_82546_rev_3: + break; + default: + return E1000_SUCCESS; + } + /* Set PHY register 30, page 5, bit 8 to 0 */ -/***************************************************************************** - * This function checks the mode of the firmware. - * - * returns - true when the mode is IAMT or false. - ****************************************************************************/ -bool e1000_check_mng_mode(struct e1000_hw *hw) -{ - u32 fwsm; - - fwsm = er32(FWSM); + ret_val = + e1000_read_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, &default_page); + if (ret_val) + return ret_val; - if (hw->mac_type == e1000_ich8lan) { - if ((fwsm & E1000_FWSM_MODE_MASK) == - (E1000_MNG_ICH_IAMT_MODE << E1000_FWSM_MODE_SHIFT)) - return true; - } else if ((fwsm & E1000_FWSM_MODE_MASK) == - (E1000_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT)) - return true; + ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0005); + if (ret_val) + return ret_val; - return false; -} + ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, &phy_data); + if (ret_val) + return ret_val; + phy_data &= ~M88E1000_PHY_VCO_REG_BIT8; + ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, phy_data); + if (ret_val) + return ret_val; -/***************************************************************************** - * This function writes the dhcp info . - ****************************************************************************/ -s32 e1000_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer, u16 length) -{ - s32 ret_val; - struct e1000_host_mng_command_header hdr; - - hdr.command_id = E1000_MNG_DHCP_TX_PAYLOAD_CMD; - hdr.command_length = length; - hdr.reserved1 = 0; - hdr.reserved2 = 0; - hdr.checksum = 0; - - ret_val = e1000_mng_enable_host_if(hw); - if (ret_val == E1000_SUCCESS) { - ret_val = e1000_mng_host_if_write(hw, buffer, length, sizeof(hdr), - &(hdr.checksum)); - if (ret_val == E1000_SUCCESS) { - ret_val = e1000_mng_write_cmd_header(hw, &hdr); - if (ret_val == E1000_SUCCESS) - ret_val = e1000_mng_write_commit(hw); - } - } - return ret_val; -} + /* Set PHY register 30, page 4, bit 11 to 1 */ + ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0004); + if (ret_val) + return ret_val; -/***************************************************************************** - * This function calculates the checksum. - * - * returns - checksum of buffer contents. - ****************************************************************************/ -static u8 e1000_calculate_mng_checksum(char *buffer, u32 length) -{ - u8 sum = 0; - u32 i; + ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, &phy_data); + if (ret_val) + return ret_val; - if (!buffer) - return 0; + phy_data |= M88E1000_PHY_VCO_REG_BIT11; + ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, phy_data); + if (ret_val) + return ret_val; - for (i=0; i < length; i++) - sum += buffer[i]; + ret_val = + e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, default_page); + if (ret_val) + return ret_val; - return (u8)(0 - sum); + return E1000_SUCCESS; } -/***************************************************************************** - * This function checks whether tx pkt filtering needs to be enabled or not. - * - * returns - true for packet filtering or false. - ****************************************************************************/ -bool e1000_enable_tx_pkt_filtering(struct e1000_hw *hw) -{ - /* called in init as well as watchdog timer functions */ - - s32 ret_val, checksum; - bool tx_filter = false; - struct e1000_host_mng_dhcp_cookie *hdr = &(hw->mng_cookie); - u8 *buffer = (u8 *) &(hw->mng_cookie); - - if (e1000_check_mng_mode(hw)) { - ret_val = e1000_mng_enable_host_if(hw); - if (ret_val == E1000_SUCCESS) { - ret_val = e1000_host_if_read_cookie(hw, buffer); - if (ret_val == E1000_SUCCESS) { - checksum = hdr->checksum; - hdr->checksum = 0; - if ((hdr->signature == E1000_IAMT_SIGNATURE) && - checksum == e1000_calculate_mng_checksum((char *)buffer, - E1000_MNG_DHCP_COOKIE_LENGTH)) { - if (hdr->status & - E1000_MNG_DHCP_COOKIE_STATUS_PARSING_SUPPORT) - tx_filter = true; - } else - tx_filter = true; - } else - tx_filter = true; - } - } - - hw->tx_pkt_filtering = tx_filter; - return tx_filter; -} -/****************************************************************************** - * Verifies the hardware needs to allow ARPs to be processed by the host - * - * hw - Struct containing variables accessed by shared code +/** + * e1000_enable_mng_pass_thru - check for bmc pass through + * @hw: Struct containing variables accessed by shared code * + * Verifies the hardware needs to allow ARPs to be processed by the host * returns: - true/false - * - *****************************************************************************/ + */ u32 e1000_enable_mng_pass_thru(struct e1000_hw *hw) { - u32 manc; - u32 fwsm, factps; - - if (hw->asf_firmware_present) { - manc = er32(MANC); - - if (!(manc & E1000_MANC_RCV_TCO_EN) || - !(manc & E1000_MANC_EN_MAC_ADDR_FILTER)) - return false; - if (e1000_arc_subsystem_valid(hw)) { - fwsm = er32(FWSM); - factps = er32(FACTPS); - - if ((((fwsm & E1000_FWSM_MODE_MASK) >> E1000_FWSM_MODE_SHIFT) == - e1000_mng_mode_pt) && !(factps & E1000_FACTPS_MNGCG)) - return true; - } else - if ((manc & E1000_MANC_SMBUS_EN) && !(manc & E1000_MANC_ASF_EN)) - return true; - } - return false; -} + u32 manc; -static s32 e1000_polarity_reversal_workaround(struct e1000_hw *hw) -{ - s32 ret_val; - u16 mii_status_reg; - u16 i; - - /* Polarity reversal workaround for forced 10F/10H links. */ - - /* Disable the transmitter on the PHY */ - - ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0019); - if (ret_val) - return ret_val; - ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xFFFF); - if (ret_val) - return ret_val; - - ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0000); - if (ret_val) - return ret_val; - - /* This loop will early-out if the NO link condition has been met. */ - for (i = PHY_FORCE_TIME; i > 0; i--) { - /* Read the MII Status Register and wait for Link Status bit - * to be clear. - */ - - ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg); - if (ret_val) - return ret_val; - - ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg); - if (ret_val) - return ret_val; - - if ((mii_status_reg & ~MII_SR_LINK_STATUS) == 0) break; - mdelay(100); - } - - /* Recommended delay time after link has been lost */ - mdelay(1000); - - /* Now we will re-enable th transmitter on the PHY */ - - ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0019); - if (ret_val) - return ret_val; - mdelay(50); - ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xFFF0); - if (ret_val) - return ret_val; - mdelay(50); - ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xFF00); - if (ret_val) - return ret_val; - mdelay(50); - ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0x0000); - if (ret_val) - return ret_val; - - ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0000); - if (ret_val) - return ret_val; - - /* This loop will early-out if the link condition has been met. */ - for (i = PHY_FORCE_TIME; i > 0; i--) { - /* Read the MII Status Register and wait for Link Status bit - * to be set. - */ - - ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg); - if (ret_val) - return ret_val; - - ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg); - if (ret_val) - return ret_val; - - if (mii_status_reg & MII_SR_LINK_STATUS) break; - mdelay(100); - } - return E1000_SUCCESS; + if (hw->asf_firmware_present) { + manc = er32(MANC); + + if (!(manc & E1000_MANC_RCV_TCO_EN) || + !(manc & E1000_MANC_EN_MAC_ADDR_FILTER)) + return false; + if ((manc & E1000_MANC_SMBUS_EN) && !(manc & E1000_MANC_ASF_EN)) + return true; + } + return false; } -/*************************************************************************** - * - * Disables PCI-Express master access. - * - * hw: Struct containing variables accessed by shared code - * - * returns: - none. - * - ***************************************************************************/ -static void e1000_set_pci_express_master_disable(struct e1000_hw *hw) +static s32 e1000_polarity_reversal_workaround(struct e1000_hw *hw) { - u32 ctrl; + s32 ret_val; + u16 mii_status_reg; + u16 i; - DEBUGFUNC("e1000_set_pci_express_master_disable"); + /* Polarity reversal workaround for forced 10F/10H links. */ - if (hw->bus_type != e1000_bus_type_pci_express) - return; + /* Disable the transmitter on the PHY */ - ctrl = er32(CTRL); - ctrl |= E1000_CTRL_GIO_MASTER_DISABLE; - ew32(CTRL, ctrl); -} + ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0019); + if (ret_val) + return ret_val; + ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xFFFF); + if (ret_val) + return ret_val; -/******************************************************************************* - * - * Disables PCI-Express master access and verifies there are no pending requests - * - * hw: Struct containing variables accessed by shared code - * - * returns: - E1000_ERR_MASTER_REQUESTS_PENDING if master disable bit hasn't - * caused the master requests to be disabled. - * E1000_SUCCESS master requests disabled. - * - ******************************************************************************/ -s32 e1000_disable_pciex_master(struct e1000_hw *hw) -{ - s32 timeout = MASTER_DISABLE_TIMEOUT; /* 80ms */ + ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0000); + if (ret_val) + return ret_val; - DEBUGFUNC("e1000_disable_pciex_master"); + /* This loop will early-out if the NO link condition has been met. */ + for (i = PHY_FORCE_TIME; i > 0; i--) { + /* Read the MII Status Register and wait for Link Status bit + * to be clear. + */ - if (hw->bus_type != e1000_bus_type_pci_express) - return E1000_SUCCESS; + ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg); + if (ret_val) + return ret_val; - e1000_set_pci_express_master_disable(hw); + ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg); + if (ret_val) + return ret_val; - while (timeout) { - if (!(er32(STATUS) & E1000_STATUS_GIO_MASTER_ENABLE)) - break; - else - udelay(100); - timeout--; - } - - if (!timeout) { - DEBUGOUT("Master requests are pending.\n"); - return -E1000_ERR_MASTER_REQUESTS_PENDING; - } + if ((mii_status_reg & ~MII_SR_LINK_STATUS) == 0) + break; + mdelay(100); + } - return E1000_SUCCESS; + /* Recommended delay time after link has been lost */ + mdelay(1000); + + /* Now we will re-enable th transmitter on the PHY */ + + ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0019); + if (ret_val) + return ret_val; + mdelay(50); + ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xFFF0); + if (ret_val) + return ret_val; + mdelay(50); + ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xFF00); + if (ret_val) + return ret_val; + mdelay(50); + ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0x0000); + if (ret_val) + return ret_val; + + ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0000); + if (ret_val) + return ret_val; + + /* This loop will early-out if the link condition has been met. */ + for (i = PHY_FORCE_TIME; i > 0; i--) { + /* Read the MII Status Register and wait for Link Status bit + * to be set. + */ + + ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg); + if (ret_val) + return ret_val; + + ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg); + if (ret_val) + return ret_val; + + if (mii_status_reg & MII_SR_LINK_STATUS) + break; + mdelay(100); + } + return E1000_SUCCESS; } -/******************************************************************************* +/** + * e1000_get_auto_rd_done + * @hw: Struct containing variables accessed by shared code * * Check for EEPROM Auto Read bit done. - * - * hw: Struct containing variables accessed by shared code - * * returns: - E1000_ERR_RESET if fail to reset MAC * E1000_SUCCESS at any other case. - * - ******************************************************************************/ + */ static s32 e1000_get_auto_rd_done(struct e1000_hw *hw) { - s32 timeout = AUTO_READ_DONE_TIMEOUT; - - DEBUGFUNC("e1000_get_auto_rd_done"); - - switch (hw->mac_type) { - default: - msleep(5); - break; - case e1000_82571: - case e1000_82572: - case e1000_82573: - case e1000_80003es2lan: - case e1000_ich8lan: - while (timeout) { - if (er32(EECD) & E1000_EECD_AUTO_RD) - break; - else msleep(1); - timeout--; - } - - if (!timeout) { - DEBUGOUT("Auto read by HW from EEPROM has not completed.\n"); - return -E1000_ERR_RESET; - } - break; - } - - /* PHY configuration from NVM just starts after EECD_AUTO_RD sets to high. - * Need to wait for PHY configuration completion before accessing NVM - * and PHY. */ - if (hw->mac_type == e1000_82573) - msleep(25); - - return E1000_SUCCESS; + DEBUGFUNC("e1000_get_auto_rd_done"); + msleep(5); + return E1000_SUCCESS; } -/*************************************************************************** - * Checks if the PHY configuration is done - * - * hw: Struct containing variables accessed by shared code +/** + * e1000_get_phy_cfg_done + * @hw: Struct containing variables accessed by shared code * + * Checks if the PHY configuration is done * returns: - E1000_ERR_RESET if fail to reset MAC * E1000_SUCCESS at any other case. - * - ***************************************************************************/ + */ static s32 e1000_get_phy_cfg_done(struct e1000_hw *hw) { - s32 timeout = PHY_CFG_TIMEOUT; - u32 cfg_mask = E1000_EEPROM_CFG_DONE; - - DEBUGFUNC("e1000_get_phy_cfg_done"); - - switch (hw->mac_type) { - default: - mdelay(10); - break; - case e1000_80003es2lan: - /* Separate *_CFG_DONE_* bit for each port */ - if (er32(STATUS) & E1000_STATUS_FUNC_1) - cfg_mask = E1000_EEPROM_CFG_DONE_PORT_1; - /* Fall Through */ - case e1000_82571: - case e1000_82572: - while (timeout) { - if (er32(EEMNGCTL) & cfg_mask) - break; - else - msleep(1); - timeout--; - } - if (!timeout) { - DEBUGOUT("MNG configuration cycle has not completed.\n"); - return -E1000_ERR_RESET; - } - break; - } - - return E1000_SUCCESS; -} - -/*************************************************************************** - * - * Using the combination of SMBI and SWESMBI semaphore bits when resetting - * adapter or Eeprom access. - * - * hw: Struct containing variables accessed by shared code - * - * returns: - E1000_ERR_EEPROM if fail to access EEPROM. - * E1000_SUCCESS at any other case. - * - ***************************************************************************/ -static s32 e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw) -{ - s32 timeout; - u32 swsm; - - DEBUGFUNC("e1000_get_hw_eeprom_semaphore"); - - if (!hw->eeprom_semaphore_present) - return E1000_SUCCESS; - - if (hw->mac_type == e1000_80003es2lan) { - /* Get the SW semaphore. */ - if (e1000_get_software_semaphore(hw) != E1000_SUCCESS) - return -E1000_ERR_EEPROM; - } - - /* Get the FW semaphore. */ - timeout = hw->eeprom.word_size + 1; - while (timeout) { - swsm = er32(SWSM); - swsm |= E1000_SWSM_SWESMBI; - ew32(SWSM, swsm); - /* if we managed to set the bit we got the semaphore. */ - swsm = er32(SWSM); - if (swsm & E1000_SWSM_SWESMBI) - break; - - udelay(50); - timeout--; - } - - if (!timeout) { - /* Release semaphores */ - e1000_put_hw_eeprom_semaphore(hw); - DEBUGOUT("Driver can't access the Eeprom - SWESMBI bit is set.\n"); - return -E1000_ERR_EEPROM; - } - - return E1000_SUCCESS; -} - -/*************************************************************************** - * This function clears HW semaphore bits. - * - * hw: Struct containing variables accessed by shared code - * - * returns: - None. - * - ***************************************************************************/ -static void e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw) -{ - u32 swsm; - - DEBUGFUNC("e1000_put_hw_eeprom_semaphore"); - - if (!hw->eeprom_semaphore_present) - return; - - swsm = er32(SWSM); - if (hw->mac_type == e1000_80003es2lan) { - /* Release both semaphores. */ - swsm &= ~(E1000_SWSM_SMBI | E1000_SWSM_SWESMBI); - } else - swsm &= ~(E1000_SWSM_SWESMBI); - ew32(SWSM, swsm); -} - -/*************************************************************************** - * - * Obtaining software semaphore bit (SMBI) before resetting PHY. - * - * hw: Struct containing variables accessed by shared code - * - * returns: - E1000_ERR_RESET if fail to obtain semaphore. - * E1000_SUCCESS at any other case. - * - ***************************************************************************/ -static s32 e1000_get_software_semaphore(struct e1000_hw *hw) -{ - s32 timeout = hw->eeprom.word_size + 1; - u32 swsm; - - DEBUGFUNC("e1000_get_software_semaphore"); - - if (hw->mac_type != e1000_80003es2lan) { - return E1000_SUCCESS; - } - - while (timeout) { - swsm = er32(SWSM); - /* If SMBI bit cleared, it is now set and we hold the semaphore */ - if (!(swsm & E1000_SWSM_SMBI)) - break; - mdelay(1); - timeout--; - } - - if (!timeout) { - DEBUGOUT("Driver can't access device - SMBI bit is set.\n"); - return -E1000_ERR_RESET; - } - - return E1000_SUCCESS; -} - -/*************************************************************************** - * - * Release semaphore bit (SMBI). - * - * hw: Struct containing variables accessed by shared code - * - ***************************************************************************/ -static void e1000_release_software_semaphore(struct e1000_hw *hw) -{ - u32 swsm; - - DEBUGFUNC("e1000_release_software_semaphore"); - - if (hw->mac_type != e1000_80003es2lan) { - return; - } - - swsm = er32(SWSM); - /* Release the SW semaphores.*/ - swsm &= ~E1000_SWSM_SMBI; - ew32(SWSM, swsm); -} - -/****************************************************************************** - * Checks if PHY reset is blocked due to SOL/IDER session, for example. - * Returning E1000_BLK_PHY_RESET isn't necessarily an error. But it's up to - * the caller to figure out how to deal with it. - * - * hw - Struct containing variables accessed by shared code - * - * returns: - E1000_BLK_PHY_RESET - * E1000_SUCCESS - * - *****************************************************************************/ -s32 e1000_check_phy_reset_block(struct e1000_hw *hw) -{ - u32 manc = 0; - u32 fwsm = 0; - - if (hw->mac_type == e1000_ich8lan) { - fwsm = er32(FWSM); - return (fwsm & E1000_FWSM_RSPCIPHY) ? E1000_SUCCESS - : E1000_BLK_PHY_RESET; - } - - if (hw->mac_type > e1000_82547_rev_2) - manc = er32(MANC); - return (manc & E1000_MANC_BLK_PHY_RST_ON_IDE) ? - E1000_BLK_PHY_RESET : E1000_SUCCESS; -} - -static u8 e1000_arc_subsystem_valid(struct e1000_hw *hw) -{ - u32 fwsm; - - /* On 8257x silicon, registers in the range of 0x8800 - 0x8FFC - * may not be provided a DMA clock when no manageability features are - * enabled. We do not want to perform any reads/writes to these registers - * if this is the case. We read FWSM to determine the manageability mode. - */ - switch (hw->mac_type) { - case e1000_82571: - case e1000_82572: - case e1000_82573: - case e1000_80003es2lan: - fwsm = er32(FWSM); - if ((fwsm & E1000_FWSM_MODE_MASK) != 0) - return true; - break; - case e1000_ich8lan: - return true; - default: - break; - } - return false; -} - - -/****************************************************************************** - * Configure PCI-Ex no-snoop - * - * hw - Struct containing variables accessed by shared code. - * no_snoop - Bitmap of no-snoop events. - * - * returns: E1000_SUCCESS - * - *****************************************************************************/ -static s32 e1000_set_pci_ex_no_snoop(struct e1000_hw *hw, u32 no_snoop) -{ - u32 gcr_reg = 0; - - DEBUGFUNC("e1000_set_pci_ex_no_snoop"); - - if (hw->bus_type == e1000_bus_type_unknown) - e1000_get_bus_info(hw); - - if (hw->bus_type != e1000_bus_type_pci_express) - return E1000_SUCCESS; - - if (no_snoop) { - gcr_reg = er32(GCR); - gcr_reg &= ~(PCI_EX_NO_SNOOP_ALL); - gcr_reg |= no_snoop; - ew32(GCR, gcr_reg); - } - if (hw->mac_type == e1000_ich8lan) { - u32 ctrl_ext; - - ew32(GCR, PCI_EX_82566_SNOOP_ALL); - - ctrl_ext = er32(CTRL_EXT); - ctrl_ext |= E1000_CTRL_EXT_RO_DIS; - ew32(CTRL_EXT, ctrl_ext); - } - - return E1000_SUCCESS; -} - -/*************************************************************************** - * - * Get software semaphore FLAG bit (SWFLAG). - * SWFLAG is used to synchronize the access to all shared resource between - * SW, FW and HW. - * - * hw: Struct containing variables accessed by shared code - * - ***************************************************************************/ -static s32 e1000_get_software_flag(struct e1000_hw *hw) -{ - s32 timeout = PHY_CFG_TIMEOUT; - u32 extcnf_ctrl; - - DEBUGFUNC("e1000_get_software_flag"); - - if (hw->mac_type == e1000_ich8lan) { - while (timeout) { - extcnf_ctrl = er32(EXTCNF_CTRL); - extcnf_ctrl |= E1000_EXTCNF_CTRL_SWFLAG; - ew32(EXTCNF_CTRL, extcnf_ctrl); - - extcnf_ctrl = er32(EXTCNF_CTRL); - if (extcnf_ctrl & E1000_EXTCNF_CTRL_SWFLAG) - break; - mdelay(1); - timeout--; - } - - if (!timeout) { - DEBUGOUT("FW or HW locks the resource too long.\n"); - return -E1000_ERR_CONFIG; - } - } - - return E1000_SUCCESS; -} - -/*************************************************************************** - * - * Release software semaphore FLAG bit (SWFLAG). - * SWFLAG is used to synchronize the access to all shared resource between - * SW, FW and HW. - * - * hw: Struct containing variables accessed by shared code - * - ***************************************************************************/ -static void e1000_release_software_flag(struct e1000_hw *hw) -{ - u32 extcnf_ctrl; - - DEBUGFUNC("e1000_release_software_flag"); - - if (hw->mac_type == e1000_ich8lan) { - extcnf_ctrl= er32(EXTCNF_CTRL); - extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG; - ew32(EXTCNF_CTRL, extcnf_ctrl); - } - - return; -} - -/****************************************************************************** - * Reads a 16 bit word or words from the EEPROM using the ICH8's flash access - * register. - * - * hw - Struct containing variables accessed by shared code - * offset - offset of word in the EEPROM to read - * data - word read from the EEPROM - * words - number of words to read - *****************************************************************************/ -static s32 e1000_read_eeprom_ich8(struct e1000_hw *hw, u16 offset, u16 words, - u16 *data) -{ - s32 error = E1000_SUCCESS; - u32 flash_bank = 0; - u32 act_offset = 0; - u32 bank_offset = 0; - u16 word = 0; - u16 i = 0; - - /* We need to know which is the valid flash bank. In the event - * that we didn't allocate eeprom_shadow_ram, we may not be - * managing flash_bank. So it cannot be trusted and needs - * to be updated with each read. - */ - /* Value of bit 22 corresponds to the flash bank we're on. */ - flash_bank = (er32(EECD) & E1000_EECD_SEC1VAL) ? 1 : 0; - - /* Adjust offset appropriately if we're on bank 1 - adjust for word size */ - bank_offset = flash_bank * (hw->flash_bank_size * 2); - - error = e1000_get_software_flag(hw); - if (error != E1000_SUCCESS) - return error; - - for (i = 0; i < words; i++) { - if (hw->eeprom_shadow_ram != NULL && - hw->eeprom_shadow_ram[offset+i].modified) { - data[i] = hw->eeprom_shadow_ram[offset+i].eeprom_word; - } else { - /* The NVM part needs a byte offset, hence * 2 */ - act_offset = bank_offset + ((offset + i) * 2); - error = e1000_read_ich8_word(hw, act_offset, &word); - if (error != E1000_SUCCESS) - break; - data[i] = word; - } - } - - e1000_release_software_flag(hw); - - return error; -} - -/****************************************************************************** - * Writes a 16 bit word or words to the EEPROM using the ICH8's flash access - * register. Actually, writes are written to the shadow ram cache in the hw - * structure hw->e1000_shadow_ram. e1000_commit_shadow_ram flushes this to - * the NVM, which occurs when the NVM checksum is updated. - * - * hw - Struct containing variables accessed by shared code - * offset - offset of word in the EEPROM to write - * words - number of words to write - * data - words to write to the EEPROM - *****************************************************************************/ -static s32 e1000_write_eeprom_ich8(struct e1000_hw *hw, u16 offset, u16 words, - u16 *data) -{ - u32 i = 0; - s32 error = E1000_SUCCESS; - - error = e1000_get_software_flag(hw); - if (error != E1000_SUCCESS) - return error; - - /* A driver can write to the NVM only if it has eeprom_shadow_ram - * allocated. Subsequent reads to the modified words are read from - * this cached structure as well. Writes will only go into this - * cached structure unless it's followed by a call to - * e1000_update_eeprom_checksum() where it will commit the changes - * and clear the "modified" field. - */ - if (hw->eeprom_shadow_ram != NULL) { - for (i = 0; i < words; i++) { - if ((offset + i) < E1000_SHADOW_RAM_WORDS) { - hw->eeprom_shadow_ram[offset+i].modified = true; - hw->eeprom_shadow_ram[offset+i].eeprom_word = data[i]; - } else { - error = -E1000_ERR_EEPROM; - break; - } - } - } else { - /* Drivers have the option to not allocate eeprom_shadow_ram as long - * as they don't perform any NVM writes. An attempt in doing so - * will result in this error. - */ - error = -E1000_ERR_EEPROM; - } - - e1000_release_software_flag(hw); - - return error; -} - -/****************************************************************************** - * This function does initial flash setup so that a new read/write/erase cycle - * can be started. - * - * hw - The pointer to the hw structure - ****************************************************************************/ -static s32 e1000_ich8_cycle_init(struct e1000_hw *hw) -{ - union ich8_hws_flash_status hsfsts; - s32 error = E1000_ERR_EEPROM; - s32 i = 0; - - DEBUGFUNC("e1000_ich8_cycle_init"); - - hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS); - - /* May be check the Flash Des Valid bit in Hw status */ - if (hsfsts.hsf_status.fldesvalid == 0) { - DEBUGOUT("Flash descriptor invalid. SW Sequencing must be used."); - return error; - } - - /* Clear FCERR in Hw status by writing 1 */ - /* Clear DAEL in Hw status by writing a 1 */ - hsfsts.hsf_status.flcerr = 1; - hsfsts.hsf_status.dael = 1; - - E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS, hsfsts.regval); - - /* Either we should have a hardware SPI cycle in progress bit to check - * against, in order to start a new cycle or FDONE bit should be changed - * in the hardware so that it is 1 after harware reset, which can then be - * used as an indication whether a cycle is in progress or has been - * completed .. we should also have some software semaphore mechanism to - * guard FDONE or the cycle in progress bit so that two threads access to - * those bits can be sequentiallized or a way so that 2 threads dont - * start the cycle at the same time */ - - if (hsfsts.hsf_status.flcinprog == 0) { - /* There is no cycle running at present, so we can start a cycle */ - /* Begin by setting Flash Cycle Done. */ - hsfsts.hsf_status.flcdone = 1; - E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS, hsfsts.regval); - error = E1000_SUCCESS; - } else { - /* otherwise poll for sometime so the current cycle has a chance - * to end before giving up. */ - for (i = 0; i < ICH_FLASH_COMMAND_TIMEOUT; i++) { - hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS); - if (hsfsts.hsf_status.flcinprog == 0) { - error = E1000_SUCCESS; - break; - } - udelay(1); - } - if (error == E1000_SUCCESS) { - /* Successful in waiting for previous cycle to timeout, - * now set the Flash Cycle Done. */ - hsfsts.hsf_status.flcdone = 1; - E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS, hsfsts.regval); - } else { - DEBUGOUT("Flash controller busy, cannot get access"); - } - } - return error; -} - -/****************************************************************************** - * This function starts a flash cycle and waits for its completion - * - * hw - The pointer to the hw structure - ****************************************************************************/ -static s32 e1000_ich8_flash_cycle(struct e1000_hw *hw, u32 timeout) -{ - union ich8_hws_flash_ctrl hsflctl; - union ich8_hws_flash_status hsfsts; - s32 error = E1000_ERR_EEPROM; - u32 i = 0; - - /* Start a cycle by writing 1 in Flash Cycle Go in Hw Flash Control */ - hsflctl.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL); - hsflctl.hsf_ctrl.flcgo = 1; - E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL, hsflctl.regval); - - /* wait till FDONE bit is set to 1 */ - do { - hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS); - if (hsfsts.hsf_status.flcdone == 1) - break; - udelay(1); - i++; - } while (i < timeout); - if (hsfsts.hsf_status.flcdone == 1 && hsfsts.hsf_status.flcerr == 0) { - error = E1000_SUCCESS; - } - return error; -} - -/****************************************************************************** - * Reads a byte or word from the NVM using the ICH8 flash access registers. - * - * hw - The pointer to the hw structure - * index - The index of the byte or word to read. - * size - Size of data to read, 1=byte 2=word - * data - Pointer to the word to store the value read. - *****************************************************************************/ -static s32 e1000_read_ich8_data(struct e1000_hw *hw, u32 index, u32 size, - u16 *data) -{ - union ich8_hws_flash_status hsfsts; - union ich8_hws_flash_ctrl hsflctl; - u32 flash_linear_address; - u32 flash_data = 0; - s32 error = -E1000_ERR_EEPROM; - s32 count = 0; - - DEBUGFUNC("e1000_read_ich8_data"); - - if (size < 1 || size > 2 || data == NULL || - index > ICH_FLASH_LINEAR_ADDR_MASK) - return error; - - flash_linear_address = (ICH_FLASH_LINEAR_ADDR_MASK & index) + - hw->flash_base_addr; - - do { - udelay(1); - /* Steps */ - error = e1000_ich8_cycle_init(hw); - if (error != E1000_SUCCESS) - break; - - hsflctl.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL); - /* 0b/1b corresponds to 1 or 2 byte size, respectively. */ - hsflctl.hsf_ctrl.fldbcount = size - 1; - hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_READ; - E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL, hsflctl.regval); - - /* Write the last 24 bits of index into Flash Linear address field in - * Flash Address */ - /* TODO: TBD maybe check the index against the size of flash */ - - E1000_WRITE_ICH_FLASH_REG(hw, ICH_FLASH_FADDR, flash_linear_address); - - error = e1000_ich8_flash_cycle(hw, ICH_FLASH_COMMAND_TIMEOUT); - - /* Check if FCERR is set to 1, if set to 1, clear it and try the whole - * sequence a few more times, else read in (shift in) the Flash Data0, - * the order is least significant byte first msb to lsb */ - if (error == E1000_SUCCESS) { - flash_data = E1000_READ_ICH_FLASH_REG(hw, ICH_FLASH_FDATA0); - if (size == 1) { - *data = (u8)(flash_data & 0x000000FF); - } else if (size == 2) { - *data = (u16)(flash_data & 0x0000FFFF); - } - break; - } else { - /* If we've gotten here, then things are probably completely hosed, - * but if the error condition is detected, it won't hurt to give - * it another try...ICH_FLASH_CYCLE_REPEAT_COUNT times. - */ - hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS); - if (hsfsts.hsf_status.flcerr == 1) { - /* Repeat for some time before giving up. */ - continue; - } else if (hsfsts.hsf_status.flcdone == 0) { - DEBUGOUT("Timeout error - flash cycle did not complete."); - break; - } - } - } while (count++ < ICH_FLASH_CYCLE_REPEAT_COUNT); - - return error; -} - -/****************************************************************************** - * Writes One /two bytes to the NVM using the ICH8 flash access registers. - * - * hw - The pointer to the hw structure - * index - The index of the byte/word to read. - * size - Size of data to read, 1=byte 2=word - * data - The byte(s) to write to the NVM. - *****************************************************************************/ -static s32 e1000_write_ich8_data(struct e1000_hw *hw, u32 index, u32 size, - u16 data) -{ - union ich8_hws_flash_status hsfsts; - union ich8_hws_flash_ctrl hsflctl; - u32 flash_linear_address; - u32 flash_data = 0; - s32 error = -E1000_ERR_EEPROM; - s32 count = 0; - - DEBUGFUNC("e1000_write_ich8_data"); - - if (size < 1 || size > 2 || data > size * 0xff || - index > ICH_FLASH_LINEAR_ADDR_MASK) - return error; - - flash_linear_address = (ICH_FLASH_LINEAR_ADDR_MASK & index) + - hw->flash_base_addr; - - do { - udelay(1); - /* Steps */ - error = e1000_ich8_cycle_init(hw); - if (error != E1000_SUCCESS) - break; - - hsflctl.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL); - /* 0b/1b corresponds to 1 or 2 byte size, respectively. */ - hsflctl.hsf_ctrl.fldbcount = size -1; - hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_WRITE; - E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL, hsflctl.regval); - - /* Write the last 24 bits of index into Flash Linear address field in - * Flash Address */ - E1000_WRITE_ICH_FLASH_REG(hw, ICH_FLASH_FADDR, flash_linear_address); - - if (size == 1) - flash_data = (u32)data & 0x00FF; - else - flash_data = (u32)data; - - E1000_WRITE_ICH_FLASH_REG(hw, ICH_FLASH_FDATA0, flash_data); - - /* check if FCERR is set to 1 , if set to 1, clear it and try the whole - * sequence a few more times else done */ - error = e1000_ich8_flash_cycle(hw, ICH_FLASH_COMMAND_TIMEOUT); - if (error == E1000_SUCCESS) { - break; - } else { - /* If we're here, then things are most likely completely hosed, - * but if the error condition is detected, it won't hurt to give - * it another try...ICH_FLASH_CYCLE_REPEAT_COUNT times. - */ - hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS); - if (hsfsts.hsf_status.flcerr == 1) { - /* Repeat for some time before giving up. */ - continue; - } else if (hsfsts.hsf_status.flcdone == 0) { - DEBUGOUT("Timeout error - flash cycle did not complete."); - break; - } - } - } while (count++ < ICH_FLASH_CYCLE_REPEAT_COUNT); - - return error; -} - -/****************************************************************************** - * Reads a single byte from the NVM using the ICH8 flash access registers. - * - * hw - pointer to e1000_hw structure - * index - The index of the byte to read. - * data - Pointer to a byte to store the value read. - *****************************************************************************/ -static s32 e1000_read_ich8_byte(struct e1000_hw *hw, u32 index, u8 *data) -{ - s32 status = E1000_SUCCESS; - u16 word = 0; - - status = e1000_read_ich8_data(hw, index, 1, &word); - if (status == E1000_SUCCESS) { - *data = (u8)word; - } - - return status; -} - -/****************************************************************************** - * Writes a single byte to the NVM using the ICH8 flash access registers. - * Performs verification by reading back the value and then going through - * a retry algorithm before giving up. - * - * hw - pointer to e1000_hw structure - * index - The index of the byte to write. - * byte - The byte to write to the NVM. - *****************************************************************************/ -static s32 e1000_verify_write_ich8_byte(struct e1000_hw *hw, u32 index, u8 byte) -{ - s32 error = E1000_SUCCESS; - s32 program_retries = 0; - - DEBUGOUT2("Byte := %2.2X Offset := %d\n", byte, index); - - error = e1000_write_ich8_byte(hw, index, byte); - - if (error != E1000_SUCCESS) { - for (program_retries = 0; program_retries < 100; program_retries++) { - DEBUGOUT2("Retrying \t Byte := %2.2X Offset := %d\n", byte, index); - error = e1000_write_ich8_byte(hw, index, byte); - udelay(100); - if (error == E1000_SUCCESS) - break; - } - } - - if (program_retries == 100) - error = E1000_ERR_EEPROM; - - return error; -} - -/****************************************************************************** - * Writes a single byte to the NVM using the ICH8 flash access registers. - * - * hw - pointer to e1000_hw structure - * index - The index of the byte to read. - * data - The byte to write to the NVM. - *****************************************************************************/ -static s32 e1000_write_ich8_byte(struct e1000_hw *hw, u32 index, u8 data) -{ - s32 status = E1000_SUCCESS; - u16 word = (u16)data; - - status = e1000_write_ich8_data(hw, index, 1, word); - - return status; -} - -/****************************************************************************** - * Reads a word from the NVM using the ICH8 flash access registers. - * - * hw - pointer to e1000_hw structure - * index - The starting byte index of the word to read. - * data - Pointer to a word to store the value read. - *****************************************************************************/ -static s32 e1000_read_ich8_word(struct e1000_hw *hw, u32 index, u16 *data) -{ - s32 status = E1000_SUCCESS; - status = e1000_read_ich8_data(hw, index, 2, data); - return status; -} - -/****************************************************************************** - * Erases the bank specified. Each bank may be a 4, 8 or 64k block. Banks are 0 - * based. - * - * hw - pointer to e1000_hw structure - * bank - 0 for first bank, 1 for second bank - * - * Note that this function may actually erase as much as 8 or 64 KBytes. The - * amount of NVM used in each bank is a *minimum* of 4 KBytes, but in fact the - * bank size may be 4, 8 or 64 KBytes - *****************************************************************************/ -static s32 e1000_erase_ich8_4k_segment(struct e1000_hw *hw, u32 bank) -{ - union ich8_hws_flash_status hsfsts; - union ich8_hws_flash_ctrl hsflctl; - u32 flash_linear_address; - s32 count = 0; - s32 error = E1000_ERR_EEPROM; - s32 iteration; - s32 sub_sector_size = 0; - s32 bank_size; - s32 j = 0; - s32 error_flag = 0; - - hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS); - - /* Determine HW Sector size: Read BERASE bits of Hw flash Status register */ - /* 00: The Hw sector is 256 bytes, hence we need to erase 16 - * consecutive sectors. The start index for the nth Hw sector can be - * calculated as bank * 4096 + n * 256 - * 01: The Hw sector is 4K bytes, hence we need to erase 1 sector. - * The start index for the nth Hw sector can be calculated - * as bank * 4096 - * 10: The HW sector is 8K bytes - * 11: The Hw sector size is 64K bytes */ - if (hsfsts.hsf_status.berasesz == 0x0) { - /* Hw sector size 256 */ - sub_sector_size = ICH_FLASH_SEG_SIZE_256; - bank_size = ICH_FLASH_SECTOR_SIZE; - iteration = ICH_FLASH_SECTOR_SIZE / ICH_FLASH_SEG_SIZE_256; - } else if (hsfsts.hsf_status.berasesz == 0x1) { - bank_size = ICH_FLASH_SEG_SIZE_4K; - iteration = 1; - } else if (hsfsts.hsf_status.berasesz == 0x3) { - bank_size = ICH_FLASH_SEG_SIZE_64K; - iteration = 1; - } else { - return error; - } - - for (j = 0; j < iteration ; j++) { - do { - count++; - /* Steps */ - error = e1000_ich8_cycle_init(hw); - if (error != E1000_SUCCESS) { - error_flag = 1; - break; - } - - /* Write a value 11 (block Erase) in Flash Cycle field in Hw flash - * Control */ - hsflctl.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL); - hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_ERASE; - E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL, hsflctl.regval); - - /* Write the last 24 bits of an index within the block into Flash - * Linear address field in Flash Address. This probably needs to - * be calculated here based off the on-chip erase sector size and - * the software bank size (4, 8 or 64 KBytes) */ - flash_linear_address = bank * bank_size + j * sub_sector_size; - flash_linear_address += hw->flash_base_addr; - flash_linear_address &= ICH_FLASH_LINEAR_ADDR_MASK; - - E1000_WRITE_ICH_FLASH_REG(hw, ICH_FLASH_FADDR, flash_linear_address); - - error = e1000_ich8_flash_cycle(hw, ICH_FLASH_ERASE_TIMEOUT); - /* Check if FCERR is set to 1. If 1, clear it and try the whole - * sequence a few more times else Done */ - if (error == E1000_SUCCESS) { - break; - } else { - hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS); - if (hsfsts.hsf_status.flcerr == 1) { - /* repeat for some time before giving up */ - continue; - } else if (hsfsts.hsf_status.flcdone == 0) { - error_flag = 1; - break; - } - } - } while ((count < ICH_FLASH_CYCLE_REPEAT_COUNT) && !error_flag); - if (error_flag == 1) - break; - } - if (error_flag != 1) - error = E1000_SUCCESS; - return error; -} - -static s32 e1000_init_lcd_from_nvm_config_region(struct e1000_hw *hw, - u32 cnf_base_addr, - u32 cnf_size) -{ - u32 ret_val = E1000_SUCCESS; - u16 word_addr, reg_data, reg_addr; - u16 i; - - /* cnf_base_addr is in DWORD */ - word_addr = (u16)(cnf_base_addr << 1); - - /* cnf_size is returned in size of dwords */ - for (i = 0; i < cnf_size; i++) { - ret_val = e1000_read_eeprom(hw, (word_addr + i*2), 1, ®_data); - if (ret_val) - return ret_val; - - ret_val = e1000_read_eeprom(hw, (word_addr + i*2 + 1), 1, ®_addr); - if (ret_val) - return ret_val; - - ret_val = e1000_get_software_flag(hw); - if (ret_val != E1000_SUCCESS) - return ret_val; - - ret_val = e1000_write_phy_reg_ex(hw, (u32)reg_addr, reg_data); - - e1000_release_software_flag(hw); - } - - return ret_val; -} - - -/****************************************************************************** - * This function initializes the PHY from the NVM on ICH8 platforms. This - * is needed due to an issue where the NVM configuration is not properly - * autoloaded after power transitions. Therefore, after each PHY reset, we - * will load the configuration data out of the NVM manually. - * - * hw: Struct containing variables accessed by shared code - *****************************************************************************/ -static s32 e1000_init_lcd_from_nvm(struct e1000_hw *hw) -{ - u32 reg_data, cnf_base_addr, cnf_size, ret_val, loop; - - if (hw->phy_type != e1000_phy_igp_3) - return E1000_SUCCESS; - - /* Check if SW needs configure the PHY */ - reg_data = er32(FEXTNVM); - if (!(reg_data & FEXTNVM_SW_CONFIG)) - return E1000_SUCCESS; - - /* Wait for basic configuration completes before proceeding*/ - loop = 0; - do { - reg_data = er32(STATUS) & E1000_STATUS_LAN_INIT_DONE; - udelay(100); - loop++; - } while ((!reg_data) && (loop < 50)); - - /* Clear the Init Done bit for the next init event */ - reg_data = er32(STATUS); - reg_data &= ~E1000_STATUS_LAN_INIT_DONE; - ew32(STATUS, reg_data); - - /* Make sure HW does not configure LCD from PHY extended configuration - before SW configuration */ - reg_data = er32(EXTCNF_CTRL); - if ((reg_data & E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE) == 0x0000) { - reg_data = er32(EXTCNF_SIZE); - cnf_size = reg_data & E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH; - cnf_size >>= 16; - if (cnf_size) { - reg_data = er32(EXTCNF_CTRL); - cnf_base_addr = reg_data & E1000_EXTCNF_CTRL_EXT_CNF_POINTER; - /* cnf_base_addr is in DWORD */ - cnf_base_addr >>= 16; - - /* Configure LCD from extended configuration region. */ - ret_val = e1000_init_lcd_from_nvm_config_region(hw, cnf_base_addr, - cnf_size); - if (ret_val) - return ret_val; - } - } - - return E1000_SUCCESS; + DEBUGFUNC("e1000_get_phy_cfg_done"); + mdelay(10); + return E1000_SUCCESS; } - diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h index a8866bdbb671..9acfddb0dafb 100644 --- a/drivers/net/e1000/e1000_hw.h +++ b/drivers/net/e1000/e1000_hw.h @@ -35,7 +35,6 @@ #include "e1000_osdep.h" - /* Forward declarations of structures used by the shared code */ struct e1000_hw; struct e1000_hw_stats; @@ -43,252 +42,231 @@ struct e1000_hw_stats; /* Enumerated types specific to the e1000 hardware */ /* Media Access Controlers */ typedef enum { - e1000_undefined = 0, - e1000_82542_rev2_0, - e1000_82542_rev2_1, - e1000_82543, - e1000_82544, - e1000_82540, - e1000_82545, - e1000_82545_rev_3, - e1000_82546, - e1000_82546_rev_3, - e1000_82541, - e1000_82541_rev_2, - e1000_82547, - e1000_82547_rev_2, - e1000_82571, - e1000_82572, - e1000_82573, - e1000_80003es2lan, - e1000_ich8lan, - e1000_num_macs + e1000_undefined = 0, + e1000_82542_rev2_0, + e1000_82542_rev2_1, + e1000_82543, + e1000_82544, + e1000_82540, + e1000_82545, + e1000_82545_rev_3, + e1000_82546, + e1000_82546_rev_3, + e1000_82541, + e1000_82541_rev_2, + e1000_82547, + e1000_82547_rev_2, + e1000_num_macs } e1000_mac_type; typedef enum { - e1000_eeprom_uninitialized = 0, - e1000_eeprom_spi, - e1000_eeprom_microwire, - e1000_eeprom_flash, - e1000_eeprom_ich8, - e1000_eeprom_none, /* No NVM support */ - e1000_num_eeprom_types + e1000_eeprom_uninitialized = 0, + e1000_eeprom_spi, + e1000_eeprom_microwire, + e1000_eeprom_flash, + e1000_eeprom_none, /* No NVM support */ + e1000_num_eeprom_types } e1000_eeprom_type; /* Media Types */ typedef enum { - e1000_media_type_copper = 0, - e1000_media_type_fiber = 1, - e1000_media_type_internal_serdes = 2, - e1000_num_media_types + e1000_media_type_copper = 0, + e1000_media_type_fiber = 1, + e1000_media_type_internal_serdes = 2, + e1000_num_media_types } e1000_media_type; typedef enum { - e1000_10_half = 0, - e1000_10_full = 1, - e1000_100_half = 2, - e1000_100_full = 3 + e1000_10_half = 0, + e1000_10_full = 1, + e1000_100_half = 2, + e1000_100_full = 3 } e1000_speed_duplex_type; /* Flow Control Settings */ typedef enum { - E1000_FC_NONE = 0, - E1000_FC_RX_PAUSE = 1, - E1000_FC_TX_PAUSE = 2, - E1000_FC_FULL = 3, - E1000_FC_DEFAULT = 0xFF + E1000_FC_NONE = 0, + E1000_FC_RX_PAUSE = 1, + E1000_FC_TX_PAUSE = 2, + E1000_FC_FULL = 3, + E1000_FC_DEFAULT = 0xFF } e1000_fc_type; struct e1000_shadow_ram { - u16 eeprom_word; - bool modified; + u16 eeprom_word; + bool modified; }; /* PCI bus types */ typedef enum { - e1000_bus_type_unknown = 0, - e1000_bus_type_pci, - e1000_bus_type_pcix, - e1000_bus_type_pci_express, - e1000_bus_type_reserved + e1000_bus_type_unknown = 0, + e1000_bus_type_pci, + e1000_bus_type_pcix, + e1000_bus_type_reserved } e1000_bus_type; /* PCI bus speeds */ typedef enum { - e1000_bus_speed_unknown = 0, - e1000_bus_speed_33, - e1000_bus_speed_66, - e1000_bus_speed_100, - e1000_bus_speed_120, - e1000_bus_speed_133, - e1000_bus_speed_2500, - e1000_bus_speed_reserved + e1000_bus_speed_unknown = 0, + e1000_bus_speed_33, + e1000_bus_speed_66, + e1000_bus_speed_100, + e1000_bus_speed_120, + e1000_bus_speed_133, + e1000_bus_speed_reserved } e1000_bus_speed; /* PCI bus widths */ typedef enum { - e1000_bus_width_unknown = 0, - /* These PCIe values should literally match the possible return values - * from config space */ - e1000_bus_width_pciex_1 = 1, - e1000_bus_width_pciex_2 = 2, - e1000_bus_width_pciex_4 = 4, - e1000_bus_width_32, - e1000_bus_width_64, - e1000_bus_width_reserved + e1000_bus_width_unknown = 0, + e1000_bus_width_32, + e1000_bus_width_64, + e1000_bus_width_reserved } e1000_bus_width; /* PHY status info structure and supporting enums */ typedef enum { - e1000_cable_length_50 = 0, - e1000_cable_length_50_80, - e1000_cable_length_80_110, - e1000_cable_length_110_140, - e1000_cable_length_140, - e1000_cable_length_undefined = 0xFF + e1000_cable_length_50 = 0, + e1000_cable_length_50_80, + e1000_cable_length_80_110, + e1000_cable_length_110_140, + e1000_cable_length_140, + e1000_cable_length_undefined = 0xFF } e1000_cable_length; typedef enum { - e1000_gg_cable_length_60 = 0, - e1000_gg_cable_length_60_115 = 1, - e1000_gg_cable_length_115_150 = 2, - e1000_gg_cable_length_150 = 4 + e1000_gg_cable_length_60 = 0, + e1000_gg_cable_length_60_115 = 1, + e1000_gg_cable_length_115_150 = 2, + e1000_gg_cable_length_150 = 4 } e1000_gg_cable_length; typedef enum { - e1000_igp_cable_length_10 = 10, - e1000_igp_cable_length_20 = 20, - e1000_igp_cable_length_30 = 30, - e1000_igp_cable_length_40 = 40, - e1000_igp_cable_length_50 = 50, - e1000_igp_cable_length_60 = 60, - e1000_igp_cable_length_70 = 70, - e1000_igp_cable_length_80 = 80, - e1000_igp_cable_length_90 = 90, - e1000_igp_cable_length_100 = 100, - e1000_igp_cable_length_110 = 110, - e1000_igp_cable_length_115 = 115, - e1000_igp_cable_length_120 = 120, - e1000_igp_cable_length_130 = 130, - e1000_igp_cable_length_140 = 140, - e1000_igp_cable_length_150 = 150, - e1000_igp_cable_length_160 = 160, - e1000_igp_cable_length_170 = 170, - e1000_igp_cable_length_180 = 180 + e1000_igp_cable_length_10 = 10, + e1000_igp_cable_length_20 = 20, + e1000_igp_cable_length_30 = 30, + e1000_igp_cable_length_40 = 40, + e1000_igp_cable_length_50 = 50, + e1000_igp_cable_length_60 = 60, + e1000_igp_cable_length_70 = 70, + e1000_igp_cable_length_80 = 80, + e1000_igp_cable_length_90 = 90, + e1000_igp_cable_length_100 = 100, + e1000_igp_cable_length_110 = 110, + e1000_igp_cable_length_115 = 115, + e1000_igp_cable_length_120 = 120, + e1000_igp_cable_length_130 = 130, + e1000_igp_cable_length_140 = 140, + e1000_igp_cable_length_150 = 150, + e1000_igp_cable_length_160 = 160, + e1000_igp_cable_length_170 = 170, + e1000_igp_cable_length_180 = 180 } e1000_igp_cable_length; typedef enum { - e1000_10bt_ext_dist_enable_normal = 0, - e1000_10bt_ext_dist_enable_lower, - e1000_10bt_ext_dist_enable_undefined = 0xFF + e1000_10bt_ext_dist_enable_normal = 0, + e1000_10bt_ext_dist_enable_lower, + e1000_10bt_ext_dist_enable_undefined = 0xFF } e1000_10bt_ext_dist_enable; typedef enum { - e1000_rev_polarity_normal = 0, - e1000_rev_polarity_reversed, - e1000_rev_polarity_undefined = 0xFF + e1000_rev_polarity_normal = 0, + e1000_rev_polarity_reversed, + e1000_rev_polarity_undefined = 0xFF } e1000_rev_polarity; typedef enum { - e1000_downshift_normal = 0, - e1000_downshift_activated, - e1000_downshift_undefined = 0xFF + e1000_downshift_normal = 0, + e1000_downshift_activated, + e1000_downshift_undefined = 0xFF } e1000_downshift; typedef enum { - e1000_smart_speed_default = 0, - e1000_smart_speed_on, - e1000_smart_speed_off + e1000_smart_speed_default = 0, + e1000_smart_speed_on, + e1000_smart_speed_off } e1000_smart_speed; typedef enum { - e1000_polarity_reversal_enabled = 0, - e1000_polarity_reversal_disabled, - e1000_polarity_reversal_undefined = 0xFF + e1000_polarity_reversal_enabled = 0, + e1000_polarity_reversal_disabled, + e1000_polarity_reversal_undefined = 0xFF } e1000_polarity_reversal; typedef enum { - e1000_auto_x_mode_manual_mdi = 0, - e1000_auto_x_mode_manual_mdix, - e1000_auto_x_mode_auto1, - e1000_auto_x_mode_auto2, - e1000_auto_x_mode_undefined = 0xFF + e1000_auto_x_mode_manual_mdi = 0, + e1000_auto_x_mode_manual_mdix, + e1000_auto_x_mode_auto1, + e1000_auto_x_mode_auto2, + e1000_auto_x_mode_undefined = 0xFF } e1000_auto_x_mode; typedef enum { - e1000_1000t_rx_status_not_ok = 0, - e1000_1000t_rx_status_ok, - e1000_1000t_rx_status_undefined = 0xFF + e1000_1000t_rx_status_not_ok = 0, + e1000_1000t_rx_status_ok, + e1000_1000t_rx_status_undefined = 0xFF } e1000_1000t_rx_status; typedef enum { e1000_phy_m88 = 0, e1000_phy_igp, - e1000_phy_igp_2, - e1000_phy_gg82563, - e1000_phy_igp_3, - e1000_phy_ife, e1000_phy_undefined = 0xFF } e1000_phy_type; typedef enum { - e1000_ms_hw_default = 0, - e1000_ms_force_master, - e1000_ms_force_slave, - e1000_ms_auto + e1000_ms_hw_default = 0, + e1000_ms_force_master, + e1000_ms_force_slave, + e1000_ms_auto } e1000_ms_type; typedef enum { - e1000_ffe_config_enabled = 0, - e1000_ffe_config_active, - e1000_ffe_config_blocked + e1000_ffe_config_enabled = 0, + e1000_ffe_config_active, + e1000_ffe_config_blocked } e1000_ffe_config; typedef enum { - e1000_dsp_config_disabled = 0, - e1000_dsp_config_enabled, - e1000_dsp_config_activated, - e1000_dsp_config_undefined = 0xFF + e1000_dsp_config_disabled = 0, + e1000_dsp_config_enabled, + e1000_dsp_config_activated, + e1000_dsp_config_undefined = 0xFF } e1000_dsp_config; struct e1000_phy_info { - e1000_cable_length cable_length; - e1000_10bt_ext_dist_enable extended_10bt_distance; - e1000_rev_polarity cable_polarity; - e1000_downshift downshift; - e1000_polarity_reversal polarity_correction; - e1000_auto_x_mode mdix_mode; - e1000_1000t_rx_status local_rx; - e1000_1000t_rx_status remote_rx; + e1000_cable_length cable_length; + e1000_10bt_ext_dist_enable extended_10bt_distance; + e1000_rev_polarity cable_polarity; + e1000_downshift downshift; + e1000_polarity_reversal polarity_correction; + e1000_auto_x_mode mdix_mode; + e1000_1000t_rx_status local_rx; + e1000_1000t_rx_status remote_rx; }; struct e1000_phy_stats { - u32 idle_errors; - u32 receive_errors; + u32 idle_errors; + u32 receive_errors; }; struct e1000_eeprom_info { - e1000_eeprom_type type; - u16 word_size; - u16 opcode_bits; - u16 address_bits; - u16 delay_usec; - u16 page_size; - bool use_eerd; - bool use_eewr; + e1000_eeprom_type type; + u16 word_size; + u16 opcode_bits; + u16 address_bits; + u16 delay_usec; + u16 page_size; }; /* Flex ASF Information */ #define E1000_HOST_IF_MAX_SIZE 2048 typedef enum { - e1000_byte_align = 0, - e1000_word_align = 1, - e1000_dword_align = 2 + e1000_byte_align = 0, + e1000_word_align = 1, + e1000_dword_align = 2 } e1000_align_type; - - /* Error Codes */ #define E1000_SUCCESS 0 #define E1000_ERR_EEPROM 1 @@ -301,7 +279,6 @@ typedef enum { #define E1000_ERR_MASTER_REQUESTS_PENDING 10 #define E1000_ERR_HOST_INTERFACE_COMMAND 11 #define E1000_BLK_PHY_RESET 12 -#define E1000_ERR_SWFW_SYNC 13 #define E1000_BYTE_SWAP_WORD(_value) ((((_value) & 0x00ff) << 8) | \ (((_value) & 0xff00) >> 8)) @@ -318,19 +295,17 @@ s32 e1000_setup_link(struct e1000_hw *hw); s32 e1000_phy_setup_autoneg(struct e1000_hw *hw); void e1000_config_collision_dist(struct e1000_hw *hw); s32 e1000_check_for_link(struct e1000_hw *hw); -s32 e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 *speed, u16 *duplex); +s32 e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 * speed, u16 * duplex); s32 e1000_force_mac_fc(struct e1000_hw *hw); /* PHY */ -s32 e1000_read_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 *phy_data); +s32 e1000_read_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 * phy_data); s32 e1000_write_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 data); s32 e1000_phy_hw_reset(struct e1000_hw *hw); s32 e1000_phy_reset(struct e1000_hw *hw); s32 e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info); s32 e1000_validate_mdi_setting(struct e1000_hw *hw); -void e1000_phy_powerdown_workaround(struct e1000_hw *hw); - /* EEPROM Functions */ s32 e1000_init_eeprom_params(struct e1000_hw *hw); @@ -338,66 +313,63 @@ s32 e1000_init_eeprom_params(struct e1000_hw *hw); u32 e1000_enable_mng_pass_thru(struct e1000_hw *hw); #define E1000_MNG_DHCP_TX_PAYLOAD_CMD 64 -#define E1000_HI_MAX_MNG_DATA_LENGTH 0x6F8 /* Host Interface data length */ +#define E1000_HI_MAX_MNG_DATA_LENGTH 0x6F8 /* Host Interface data length */ -#define E1000_MNG_DHCP_COMMAND_TIMEOUT 10 /* Time in ms to process MNG command */ -#define E1000_MNG_DHCP_COOKIE_OFFSET 0x6F0 /* Cookie offset */ -#define E1000_MNG_DHCP_COOKIE_LENGTH 0x10 /* Cookie length */ +#define E1000_MNG_DHCP_COMMAND_TIMEOUT 10 /* Time in ms to process MNG command */ +#define E1000_MNG_DHCP_COOKIE_OFFSET 0x6F0 /* Cookie offset */ +#define E1000_MNG_DHCP_COOKIE_LENGTH 0x10 /* Cookie length */ #define E1000_MNG_IAMT_MODE 0x3 #define E1000_MNG_ICH_IAMT_MODE 0x2 -#define E1000_IAMT_SIGNATURE 0x544D4149 /* Intel(R) Active Management Technology signature */ +#define E1000_IAMT_SIGNATURE 0x544D4149 /* Intel(R) Active Management Technology signature */ -#define E1000_MNG_DHCP_COOKIE_STATUS_PARSING_SUPPORT 0x1 /* DHCP parsing enabled */ -#define E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT 0x2 /* DHCP parsing enabled */ +#define E1000_MNG_DHCP_COOKIE_STATUS_PARSING_SUPPORT 0x1 /* DHCP parsing enabled */ +#define E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT 0x2 /* DHCP parsing enabled */ #define E1000_VFTA_ENTRY_SHIFT 0x5 #define E1000_VFTA_ENTRY_MASK 0x7F #define E1000_VFTA_ENTRY_BIT_SHIFT_MASK 0x1F struct e1000_host_mng_command_header { - u8 command_id; - u8 checksum; - u16 reserved1; - u16 reserved2; - u16 command_length; + u8 command_id; + u8 checksum; + u16 reserved1; + u16 reserved2; + u16 command_length; }; struct e1000_host_mng_command_info { - struct e1000_host_mng_command_header command_header; /* Command Head/Command Result Head has 4 bytes */ - u8 command_data[E1000_HI_MAX_MNG_DATA_LENGTH]; /* Command data can length 0..0x658*/ + struct e1000_host_mng_command_header command_header; /* Command Head/Command Result Head has 4 bytes */ + u8 command_data[E1000_HI_MAX_MNG_DATA_LENGTH]; /* Command data can length 0..0x658 */ }; #ifdef __BIG_ENDIAN -struct e1000_host_mng_dhcp_cookie{ - u32 signature; - u16 vlan_id; - u8 reserved0; - u8 status; - u32 reserved1; - u8 checksum; - u8 reserved3; - u16 reserved2; +struct e1000_host_mng_dhcp_cookie { + u32 signature; + u16 vlan_id; + u8 reserved0; + u8 status; + u32 reserved1; + u8 checksum; + u8 reserved3; + u16 reserved2; }; #else -struct e1000_host_mng_dhcp_cookie{ - u32 signature; - u8 status; - u8 reserved0; - u16 vlan_id; - u32 reserved1; - u16 reserved2; - u8 reserved3; - u8 checksum; +struct e1000_host_mng_dhcp_cookie { + u32 signature; + u8 status; + u8 reserved0; + u16 vlan_id; + u32 reserved1; + u16 reserved2; + u8 reserved3; + u8 checksum; }; #endif -s32 e1000_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer, - u16 length); bool e1000_check_mng_mode(struct e1000_hw *hw); -bool e1000_enable_tx_pkt_filtering(struct e1000_hw *hw); -s32 e1000_read_eeprom(struct e1000_hw *hw, u16 reg, u16 words, u16 *data); +s32 e1000_read_eeprom(struct e1000_hw *hw, u16 reg, u16 words, u16 * data); s32 e1000_validate_eeprom_checksum(struct e1000_hw *hw); s32 e1000_update_eeprom_checksum(struct e1000_hw *hw); -s32 e1000_write_eeprom(struct e1000_hw *hw, u16 reg, u16 words, u16 *data); -s32 e1000_read_mac_addr(struct e1000_hw * hw); +s32 e1000_write_eeprom(struct e1000_hw *hw, u16 reg, u16 words, u16 * data); +s32 e1000_read_mac_addr(struct e1000_hw *hw); /* Filters (multicast, vlan, receive) */ u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 * mc_addr); @@ -417,18 +389,15 @@ s32 e1000_blink_led_start(struct e1000_hw *hw); /* Everything else */ void e1000_reset_adaptive(struct e1000_hw *hw); void e1000_update_adaptive(struct e1000_hw *hw); -void e1000_tbi_adjust_stats(struct e1000_hw *hw, struct e1000_hw_stats *stats, u32 frame_len, u8 * mac_addr); +void e1000_tbi_adjust_stats(struct e1000_hw *hw, struct e1000_hw_stats *stats, + u32 frame_len, u8 * mac_addr); void e1000_get_bus_info(struct e1000_hw *hw); void e1000_pci_set_mwi(struct e1000_hw *hw); void e1000_pci_clear_mwi(struct e1000_hw *hw); -s32 e1000_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value); void e1000_pcix_set_mmrbc(struct e1000_hw *hw, int mmrbc); int e1000_pcix_get_mmrbc(struct e1000_hw *hw); /* Port I/O is only supported on 82544 and newer */ void e1000_io_write(struct e1000_hw *hw, unsigned long port, u32 value); -s32 e1000_disable_pciex_master(struct e1000_hw *hw); -s32 e1000_check_phy_reset_block(struct e1000_hw *hw); - #define E1000_READ_REG_IO(a, reg) \ e1000_read_reg_io((a), E1000_##reg) @@ -471,36 +440,7 @@ s32 e1000_check_phy_reset_block(struct e1000_hw *hw); #define E1000_DEV_ID_82546GB_QUAD_COPPER 0x1099 #define E1000_DEV_ID_82547EI 0x1019 #define E1000_DEV_ID_82547EI_MOBILE 0x101A -#define E1000_DEV_ID_82571EB_COPPER 0x105E -#define E1000_DEV_ID_82571EB_FIBER 0x105F -#define E1000_DEV_ID_82571EB_SERDES 0x1060 -#define E1000_DEV_ID_82571EB_QUAD_COPPER 0x10A4 -#define E1000_DEV_ID_82571PT_QUAD_COPPER 0x10D5 -#define E1000_DEV_ID_82571EB_QUAD_FIBER 0x10A5 -#define E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE 0x10BC -#define E1000_DEV_ID_82571EB_SERDES_DUAL 0x10D9 -#define E1000_DEV_ID_82571EB_SERDES_QUAD 0x10DA -#define E1000_DEV_ID_82572EI_COPPER 0x107D -#define E1000_DEV_ID_82572EI_FIBER 0x107E -#define E1000_DEV_ID_82572EI_SERDES 0x107F -#define E1000_DEV_ID_82572EI 0x10B9 -#define E1000_DEV_ID_82573E 0x108B -#define E1000_DEV_ID_82573E_IAMT 0x108C -#define E1000_DEV_ID_82573L 0x109A #define E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3 0x10B5 -#define E1000_DEV_ID_80003ES2LAN_COPPER_DPT 0x1096 -#define E1000_DEV_ID_80003ES2LAN_SERDES_DPT 0x1098 -#define E1000_DEV_ID_80003ES2LAN_COPPER_SPT 0x10BA -#define E1000_DEV_ID_80003ES2LAN_SERDES_SPT 0x10BB - -#define E1000_DEV_ID_ICH8_IGP_M_AMT 0x1049 -#define E1000_DEV_ID_ICH8_IGP_AMT 0x104A -#define E1000_DEV_ID_ICH8_IGP_C 0x104B -#define E1000_DEV_ID_ICH8_IFE 0x104C -#define E1000_DEV_ID_ICH8_IFE_GT 0x10C4 -#define E1000_DEV_ID_ICH8_IFE_G 0x10C5 -#define E1000_DEV_ID_ICH8_IGP_M 0x104D - #define NODE_ADDRESS_SIZE 6 #define ETH_LENGTH_OF_ADDRESS 6 @@ -523,21 +463,20 @@ s32 e1000_check_phy_reset_block(struct e1000_hw *hw); /* The sizes (in bytes) of a ethernet packet */ #define ENET_HEADER_SIZE 14 -#define MINIMUM_ETHERNET_FRAME_SIZE 64 /* With FCS */ +#define MINIMUM_ETHERNET_FRAME_SIZE 64 /* With FCS */ #define ETHERNET_FCS_SIZE 4 #define MINIMUM_ETHERNET_PACKET_SIZE \ (MINIMUM_ETHERNET_FRAME_SIZE - ETHERNET_FCS_SIZE) #define CRC_LENGTH ETHERNET_FCS_SIZE #define MAX_JUMBO_FRAME_SIZE 0x3F00 - /* 802.1q VLAN Packet Sizes */ -#define VLAN_TAG_SIZE 4 /* 802.3ac tag (not DMAed) */ +#define VLAN_TAG_SIZE 4 /* 802.3ac tag (not DMAed) */ /* Ethertype field values */ -#define ETHERNET_IEEE_VLAN_TYPE 0x8100 /* 802.3ac packet */ -#define ETHERNET_IP_TYPE 0x0800 /* IP packets */ -#define ETHERNET_ARP_TYPE 0x0806 /* Address Resolution Protocol (ARP) */ +#define ETHERNET_IEEE_VLAN_TYPE 0x8100 /* 802.3ac packet */ +#define ETHERNET_IP_TYPE 0x0800 /* IP packets */ +#define ETHERNET_ARP_TYPE 0x0806 /* Address Resolution Protocol (ARP) */ /* Packet Header defines */ #define IP_PROTOCOL_TCP 6 @@ -567,15 +506,6 @@ s32 e1000_check_phy_reset_block(struct e1000_hw *hw); E1000_IMS_RXSEQ | \ E1000_IMS_LSC) -/* Additional interrupts need to be handled for e1000_ich8lan: - DSW = The FW changed the status of the DISSW bit in FWSM - PHYINT = The LAN connected device generates an interrupt - EPRST = Manageability reset event */ -#define IMS_ICH8LAN_ENABLE_MASK (\ - E1000_IMS_DSW | \ - E1000_IMS_PHYINT | \ - E1000_IMS_EPRST) - /* Number of high/low register pairs in the RAR. The RAR (Receive Address * Registers) holds the directed and multicast addresses that we monitor. We * reserve one of these spots for our directed address, allowing us room for @@ -583,100 +513,98 @@ s32 e1000_check_phy_reset_block(struct e1000_hw *hw); */ #define E1000_RAR_ENTRIES 15 -#define E1000_RAR_ENTRIES_ICH8LAN 6 - #define MIN_NUMBER_OF_DESCRIPTORS 8 #define MAX_NUMBER_OF_DESCRIPTORS 0xFFF8 /* Receive Descriptor */ struct e1000_rx_desc { - __le64 buffer_addr; /* Address of the descriptor's data buffer */ - __le16 length; /* Length of data DMAed into data buffer */ - __le16 csum; /* Packet checksum */ - u8 status; /* Descriptor status */ - u8 errors; /* Descriptor Errors */ - __le16 special; + __le64 buffer_addr; /* Address of the descriptor's data buffer */ + __le16 length; /* Length of data DMAed into data buffer */ + __le16 csum; /* Packet checksum */ + u8 status; /* Descriptor status */ + u8 errors; /* Descriptor Errors */ + __le16 special; }; /* Receive Descriptor - Extended */ union e1000_rx_desc_extended { - struct { - __le64 buffer_addr; - __le64 reserved; - } read; - struct { - struct { - __le32 mrq; /* Multiple Rx Queues */ - union { - __le32 rss; /* RSS Hash */ - struct { - __le16 ip_id; /* IP id */ - __le16 csum; /* Packet Checksum */ - } csum_ip; - } hi_dword; - } lower; - struct { - __le32 status_error; /* ext status/error */ - __le16 length; - __le16 vlan; /* VLAN tag */ - } upper; - } wb; /* writeback */ + struct { + __le64 buffer_addr; + __le64 reserved; + } read; + struct { + struct { + __le32 mrq; /* Multiple Rx Queues */ + union { + __le32 rss; /* RSS Hash */ + struct { + __le16 ip_id; /* IP id */ + __le16 csum; /* Packet Checksum */ + } csum_ip; + } hi_dword; + } lower; + struct { + __le32 status_error; /* ext status/error */ + __le16 length; + __le16 vlan; /* VLAN tag */ + } upper; + } wb; /* writeback */ }; #define MAX_PS_BUFFERS 4 /* Receive Descriptor - Packet Split */ union e1000_rx_desc_packet_split { - struct { - /* one buffer for protocol header(s), three data buffers */ - __le64 buffer_addr[MAX_PS_BUFFERS]; - } read; - struct { - struct { - __le32 mrq; /* Multiple Rx Queues */ - union { - __le32 rss; /* RSS Hash */ - struct { - __le16 ip_id; /* IP id */ - __le16 csum; /* Packet Checksum */ - } csum_ip; - } hi_dword; - } lower; - struct { - __le32 status_error; /* ext status/error */ - __le16 length0; /* length of buffer 0 */ - __le16 vlan; /* VLAN tag */ - } middle; - struct { - __le16 header_status; - __le16 length[3]; /* length of buffers 1-3 */ - } upper; - __le64 reserved; - } wb; /* writeback */ + struct { + /* one buffer for protocol header(s), three data buffers */ + __le64 buffer_addr[MAX_PS_BUFFERS]; + } read; + struct { + struct { + __le32 mrq; /* Multiple Rx Queues */ + union { + __le32 rss; /* RSS Hash */ + struct { + __le16 ip_id; /* IP id */ + __le16 csum; /* Packet Checksum */ + } csum_ip; + } hi_dword; + } lower; + struct { + __le32 status_error; /* ext status/error */ + __le16 length0; /* length of buffer 0 */ + __le16 vlan; /* VLAN tag */ + } middle; + struct { + __le16 header_status; + __le16 length[3]; /* length of buffers 1-3 */ + } upper; + __le64 reserved; + } wb; /* writeback */ }; -/* Receive Decriptor bit definitions */ -#define E1000_RXD_STAT_DD 0x01 /* Descriptor Done */ -#define E1000_RXD_STAT_EOP 0x02 /* End of Packet */ -#define E1000_RXD_STAT_IXSM 0x04 /* Ignore checksum */ -#define E1000_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */ -#define E1000_RXD_STAT_UDPCS 0x10 /* UDP xsum caculated */ -#define E1000_RXD_STAT_TCPCS 0x20 /* TCP xsum calculated */ -#define E1000_RXD_STAT_IPCS 0x40 /* IP xsum calculated */ -#define E1000_RXD_STAT_PIF 0x80 /* passed in-exact filter */ -#define E1000_RXD_STAT_IPIDV 0x200 /* IP identification valid */ -#define E1000_RXD_STAT_UDPV 0x400 /* Valid UDP checksum */ -#define E1000_RXD_STAT_ACK 0x8000 /* ACK Packet indication */ -#define E1000_RXD_ERR_CE 0x01 /* CRC Error */ -#define E1000_RXD_ERR_SE 0x02 /* Symbol Error */ -#define E1000_RXD_ERR_SEQ 0x04 /* Sequence Error */ -#define E1000_RXD_ERR_CXE 0x10 /* Carrier Extension Error */ -#define E1000_RXD_ERR_TCPE 0x20 /* TCP/UDP Checksum Error */ -#define E1000_RXD_ERR_IPE 0x40 /* IP Checksum Error */ -#define E1000_RXD_ERR_RXE 0x80 /* Rx Data Error */ -#define E1000_RXD_SPC_VLAN_MASK 0x0FFF /* VLAN ID is in lower 12 bits */ -#define E1000_RXD_SPC_PRI_MASK 0xE000 /* Priority is in upper 3 bits */ +/* Receive Descriptor bit definitions */ +#define E1000_RXD_STAT_DD 0x01 /* Descriptor Done */ +#define E1000_RXD_STAT_EOP 0x02 /* End of Packet */ +#define E1000_RXD_STAT_IXSM 0x04 /* Ignore checksum */ +#define E1000_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */ +#define E1000_RXD_STAT_UDPCS 0x10 /* UDP xsum calculated */ +#define E1000_RXD_STAT_TCPCS 0x20 /* TCP xsum calculated */ +#define E1000_RXD_STAT_IPCS 0x40 /* IP xsum calculated */ +#define E1000_RXD_STAT_PIF 0x80 /* passed in-exact filter */ +#define E1000_RXD_STAT_IPIDV 0x200 /* IP identification valid */ +#define E1000_RXD_STAT_UDPV 0x400 /* Valid UDP checksum */ +#define E1000_RXD_STAT_ACK 0x8000 /* ACK Packet indication */ +#define E1000_RXD_ERR_CE 0x01 /* CRC Error */ +#define E1000_RXD_ERR_SE 0x02 /* Symbol Error */ +#define E1000_RXD_ERR_SEQ 0x04 /* Sequence Error */ +#define E1000_RXD_ERR_CXE 0x10 /* Carrier Extension Error */ +#define E1000_RXD_ERR_TCPE 0x20 /* TCP/UDP Checksum Error */ +#define E1000_RXD_ERR_IPE 0x40 /* IP Checksum Error */ +#define E1000_RXD_ERR_RXE 0x80 /* Rx Data Error */ +#define E1000_RXD_SPC_VLAN_MASK 0x0FFF /* VLAN ID is in lower 12 bits */ +#define E1000_RXD_SPC_PRI_MASK 0xE000 /* Priority is in upper 3 bits */ #define E1000_RXD_SPC_PRI_SHIFT 13 -#define E1000_RXD_SPC_CFI_MASK 0x1000 /* CFI is bit 12 */ +#define E1000_RXD_SPC_CFI_MASK 0x1000 /* CFI is bit 12 */ #define E1000_RXD_SPC_CFI_SHIFT 12 #define E1000_RXDEXT_STATERR_CE 0x01000000 @@ -698,7 +626,6 @@ union e1000_rx_desc_packet_split { E1000_RXD_ERR_CXE | \ E1000_RXD_ERR_RXE) - /* Same mask, but for extended and packet split descriptors */ #define E1000_RXDEXT_ERR_FRAME_ERR_MASK ( \ E1000_RXDEXT_STATERR_CE | \ @@ -707,152 +634,145 @@ union e1000_rx_desc_packet_split { E1000_RXDEXT_STATERR_CXE | \ E1000_RXDEXT_STATERR_RXE) - /* Transmit Descriptor */ struct e1000_tx_desc { - __le64 buffer_addr; /* Address of the descriptor's data buffer */ - union { - __le32 data; - struct { - __le16 length; /* Data buffer length */ - u8 cso; /* Checksum offset */ - u8 cmd; /* Descriptor control */ - } flags; - } lower; - union { - __le32 data; - struct { - u8 status; /* Descriptor status */ - u8 css; /* Checksum start */ - __le16 special; - } fields; - } upper; + __le64 buffer_addr; /* Address of the descriptor's data buffer */ + union { + __le32 data; + struct { + __le16 length; /* Data buffer length */ + u8 cso; /* Checksum offset */ + u8 cmd; /* Descriptor control */ + } flags; + } lower; + union { + __le32 data; + struct { + u8 status; /* Descriptor status */ + u8 css; /* Checksum start */ + __le16 special; + } fields; + } upper; }; /* Transmit Descriptor bit definitions */ -#define E1000_TXD_DTYP_D 0x00100000 /* Data Descriptor */ -#define E1000_TXD_DTYP_C 0x00000000 /* Context Descriptor */ -#define E1000_TXD_POPTS_IXSM 0x01 /* Insert IP checksum */ -#define E1000_TXD_POPTS_TXSM 0x02 /* Insert TCP/UDP checksum */ -#define E1000_TXD_CMD_EOP 0x01000000 /* End of Packet */ -#define E1000_TXD_CMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */ -#define E1000_TXD_CMD_IC 0x04000000 /* Insert Checksum */ -#define E1000_TXD_CMD_RS 0x08000000 /* Report Status */ -#define E1000_TXD_CMD_RPS 0x10000000 /* Report Packet Sent */ -#define E1000_TXD_CMD_DEXT 0x20000000 /* Descriptor extension (0 = legacy) */ -#define E1000_TXD_CMD_VLE 0x40000000 /* Add VLAN tag */ -#define E1000_TXD_CMD_IDE 0x80000000 /* Enable Tidv register */ -#define E1000_TXD_STAT_DD 0x00000001 /* Descriptor Done */ -#define E1000_TXD_STAT_EC 0x00000002 /* Excess Collisions */ -#define E1000_TXD_STAT_LC 0x00000004 /* Late Collisions */ -#define E1000_TXD_STAT_TU 0x00000008 /* Transmit underrun */ -#define E1000_TXD_CMD_TCP 0x01000000 /* TCP packet */ -#define E1000_TXD_CMD_IP 0x02000000 /* IP packet */ -#define E1000_TXD_CMD_TSE 0x04000000 /* TCP Seg enable */ -#define E1000_TXD_STAT_TC 0x00000004 /* Tx Underrun */ +#define E1000_TXD_DTYP_D 0x00100000 /* Data Descriptor */ +#define E1000_TXD_DTYP_C 0x00000000 /* Context Descriptor */ +#define E1000_TXD_POPTS_IXSM 0x01 /* Insert IP checksum */ +#define E1000_TXD_POPTS_TXSM 0x02 /* Insert TCP/UDP checksum */ +#define E1000_TXD_CMD_EOP 0x01000000 /* End of Packet */ +#define E1000_TXD_CMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */ +#define E1000_TXD_CMD_IC 0x04000000 /* Insert Checksum */ +#define E1000_TXD_CMD_RS 0x08000000 /* Report Status */ +#define E1000_TXD_CMD_RPS 0x10000000 /* Report Packet Sent */ +#define E1000_TXD_CMD_DEXT 0x20000000 /* Descriptor extension (0 = legacy) */ +#define E1000_TXD_CMD_VLE 0x40000000 /* Add VLAN tag */ +#define E1000_TXD_CMD_IDE 0x80000000 /* Enable Tidv register */ +#define E1000_TXD_STAT_DD 0x00000001 /* Descriptor Done */ +#define E1000_TXD_STAT_EC 0x00000002 /* Excess Collisions */ +#define E1000_TXD_STAT_LC 0x00000004 /* Late Collisions */ +#define E1000_TXD_STAT_TU 0x00000008 /* Transmit underrun */ +#define E1000_TXD_CMD_TCP 0x01000000 /* TCP packet */ +#define E1000_TXD_CMD_IP 0x02000000 /* IP packet */ +#define E1000_TXD_CMD_TSE 0x04000000 /* TCP Seg enable */ +#define E1000_TXD_STAT_TC 0x00000004 /* Tx Underrun */ /* Offload Context Descriptor */ struct e1000_context_desc { - union { - __le32 ip_config; - struct { - u8 ipcss; /* IP checksum start */ - u8 ipcso; /* IP checksum offset */ - __le16 ipcse; /* IP checksum end */ - } ip_fields; - } lower_setup; - union { - __le32 tcp_config; - struct { - u8 tucss; /* TCP checksum start */ - u8 tucso; /* TCP checksum offset */ - __le16 tucse; /* TCP checksum end */ - } tcp_fields; - } upper_setup; - __le32 cmd_and_length; /* */ - union { - __le32 data; - struct { - u8 status; /* Descriptor status */ - u8 hdr_len; /* Header length */ - __le16 mss; /* Maximum segment size */ - } fields; - } tcp_seg_setup; + union { + __le32 ip_config; + struct { + u8 ipcss; /* IP checksum start */ + u8 ipcso; /* IP checksum offset */ + __le16 ipcse; /* IP checksum end */ + } ip_fields; + } lower_setup; + union { + __le32 tcp_config; + struct { + u8 tucss; /* TCP checksum start */ + u8 tucso; /* TCP checksum offset */ + __le16 tucse; /* TCP checksum end */ + } tcp_fields; + } upper_setup; + __le32 cmd_and_length; /* */ + union { + __le32 data; + struct { + u8 status; /* Descriptor status */ + u8 hdr_len; /* Header length */ + __le16 mss; /* Maximum segment size */ + } fields; + } tcp_seg_setup; }; /* Offload data descriptor */ struct e1000_data_desc { - __le64 buffer_addr; /* Address of the descriptor's buffer address */ - union { - __le32 data; - struct { - __le16 length; /* Data buffer length */ - u8 typ_len_ext; /* */ - u8 cmd; /* */ - } flags; - } lower; - union { - __le32 data; - struct { - u8 status; /* Descriptor status */ - u8 popts; /* Packet Options */ - __le16 special; /* */ - } fields; - } upper; + __le64 buffer_addr; /* Address of the descriptor's buffer address */ + union { + __le32 data; + struct { + __le16 length; /* Data buffer length */ + u8 typ_len_ext; /* */ + u8 cmd; /* */ + } flags; + } lower; + union { + __le32 data; + struct { + u8 status; /* Descriptor status */ + u8 popts; /* Packet Options */ + __le16 special; /* */ + } fields; + } upper; }; /* Filters */ -#define E1000_NUM_UNICAST 16 /* Unicast filter entries */ -#define E1000_MC_TBL_SIZE 128 /* Multicast Filter Table (4096 bits) */ -#define E1000_VLAN_FILTER_TBL_SIZE 128 /* VLAN Filter Table (4096 bits) */ - -#define E1000_NUM_UNICAST_ICH8LAN 7 -#define E1000_MC_TBL_SIZE_ICH8LAN 32 - +#define E1000_NUM_UNICAST 16 /* Unicast filter entries */ +#define E1000_MC_TBL_SIZE 128 /* Multicast Filter Table (4096 bits) */ +#define E1000_VLAN_FILTER_TBL_SIZE 128 /* VLAN Filter Table (4096 bits) */ /* Receive Address Register */ struct e1000_rar { - volatile __le32 low; /* receive address low */ - volatile __le32 high; /* receive address high */ + volatile __le32 low; /* receive address low */ + volatile __le32 high; /* receive address high */ }; /* Number of entries in the Multicast Table Array (MTA). */ #define E1000_NUM_MTA_REGISTERS 128 -#define E1000_NUM_MTA_REGISTERS_ICH8LAN 32 /* IPv4 Address Table Entry */ struct e1000_ipv4_at_entry { - volatile u32 ipv4_addr; /* IP Address (RW) */ - volatile u32 reserved; + volatile u32 ipv4_addr; /* IP Address (RW) */ + volatile u32 reserved; }; /* Four wakeup IP addresses are supported */ #define E1000_WAKEUP_IP_ADDRESS_COUNT_MAX 4 #define E1000_IP4AT_SIZE E1000_WAKEUP_IP_ADDRESS_COUNT_MAX -#define E1000_IP4AT_SIZE_ICH8LAN 3 #define E1000_IP6AT_SIZE 1 /* IPv6 Address Table Entry */ struct e1000_ipv6_at_entry { - volatile u8 ipv6_addr[16]; + volatile u8 ipv6_addr[16]; }; /* Flexible Filter Length Table Entry */ struct e1000_fflt_entry { - volatile u32 length; /* Flexible Filter Length (RW) */ - volatile u32 reserved; + volatile u32 length; /* Flexible Filter Length (RW) */ + volatile u32 reserved; }; /* Flexible Filter Mask Table Entry */ struct e1000_ffmt_entry { - volatile u32 mask; /* Flexible Filter Mask (RW) */ - volatile u32 reserved; + volatile u32 mask; /* Flexible Filter Mask (RW) */ + volatile u32 reserved; }; /* Flexible Filter Value Table Entry */ struct e1000_ffvt_entry { - volatile u32 value; /* Flexible Filter Value (RW) */ - volatile u32 reserved; + volatile u32 value; /* Flexible Filter Value (RW) */ + volatile u32 reserved; }; /* Four Flexible Filters are supported */ @@ -879,211 +799,211 @@ struct e1000_ffvt_entry { * R/clr - register is read only and is cleared when read * A - register array */ -#define E1000_CTRL 0x00000 /* Device Control - RW */ -#define E1000_CTRL_DUP 0x00004 /* Device Control Duplicate (Shadow) - RW */ -#define E1000_STATUS 0x00008 /* Device Status - RO */ -#define E1000_EECD 0x00010 /* EEPROM/Flash Control - RW */ -#define E1000_EERD 0x00014 /* EEPROM Read - RW */ -#define E1000_CTRL_EXT 0x00018 /* Extended Device Control - RW */ -#define E1000_FLA 0x0001C /* Flash Access - RW */ -#define E1000_MDIC 0x00020 /* MDI Control - RW */ -#define E1000_SCTL 0x00024 /* SerDes Control - RW */ -#define E1000_FEXTNVM 0x00028 /* Future Extended NVM register */ -#define E1000_FCAL 0x00028 /* Flow Control Address Low - RW */ -#define E1000_FCAH 0x0002C /* Flow Control Address High -RW */ -#define E1000_FCT 0x00030 /* Flow Control Type - RW */ -#define E1000_VET 0x00038 /* VLAN Ether Type - RW */ -#define E1000_ICR 0x000C0 /* Interrupt Cause Read - R/clr */ -#define E1000_ITR 0x000C4 /* Interrupt Throttling Rate - RW */ -#define E1000_ICS 0x000C8 /* Interrupt Cause Set - WO */ -#define E1000_IMS 0x000D0 /* Interrupt Mask Set - RW */ -#define E1000_IMC 0x000D8 /* Interrupt Mask Clear - WO */ -#define E1000_IAM 0x000E0 /* Interrupt Acknowledge Auto Mask */ -#define E1000_RCTL 0x00100 /* RX Control - RW */ -#define E1000_RDTR1 0x02820 /* RX Delay Timer (1) - RW */ -#define E1000_RDBAL1 0x02900 /* RX Descriptor Base Address Low (1) - RW */ -#define E1000_RDBAH1 0x02904 /* RX Descriptor Base Address High (1) - RW */ -#define E1000_RDLEN1 0x02908 /* RX Descriptor Length (1) - RW */ -#define E1000_RDH1 0x02910 /* RX Descriptor Head (1) - RW */ -#define E1000_RDT1 0x02918 /* RX Descriptor Tail (1) - RW */ -#define E1000_FCTTV 0x00170 /* Flow Control Transmit Timer Value - RW */ -#define E1000_TXCW 0x00178 /* TX Configuration Word - RW */ -#define E1000_RXCW 0x00180 /* RX Configuration Word - RO */ -#define E1000_TCTL 0x00400 /* TX Control - RW */ -#define E1000_TCTL_EXT 0x00404 /* Extended TX Control - RW */ -#define E1000_TIPG 0x00410 /* TX Inter-packet gap -RW */ -#define E1000_TBT 0x00448 /* TX Burst Timer - RW */ -#define E1000_AIT 0x00458 /* Adaptive Interframe Spacing Throttle - RW */ -#define E1000_LEDCTL 0x00E00 /* LED Control - RW */ -#define E1000_EXTCNF_CTRL 0x00F00 /* Extended Configuration Control */ -#define E1000_EXTCNF_SIZE 0x00F08 /* Extended Configuration Size */ -#define E1000_PHY_CTRL 0x00F10 /* PHY Control Register in CSR */ +#define E1000_CTRL 0x00000 /* Device Control - RW */ +#define E1000_CTRL_DUP 0x00004 /* Device Control Duplicate (Shadow) - RW */ +#define E1000_STATUS 0x00008 /* Device Status - RO */ +#define E1000_EECD 0x00010 /* EEPROM/Flash Control - RW */ +#define E1000_EERD 0x00014 /* EEPROM Read - RW */ +#define E1000_CTRL_EXT 0x00018 /* Extended Device Control - RW */ +#define E1000_FLA 0x0001C /* Flash Access - RW */ +#define E1000_MDIC 0x00020 /* MDI Control - RW */ +#define E1000_SCTL 0x00024 /* SerDes Control - RW */ +#define E1000_FEXTNVM 0x00028 /* Future Extended NVM register */ +#define E1000_FCAL 0x00028 /* Flow Control Address Low - RW */ +#define E1000_FCAH 0x0002C /* Flow Control Address High -RW */ +#define E1000_FCT 0x00030 /* Flow Control Type - RW */ +#define E1000_VET 0x00038 /* VLAN Ether Type - RW */ +#define E1000_ICR 0x000C0 /* Interrupt Cause Read - R/clr */ +#define E1000_ITR 0x000C4 /* Interrupt Throttling Rate - RW */ +#define E1000_ICS 0x000C8 /* Interrupt Cause Set - WO */ +#define E1000_IMS 0x000D0 /* Interrupt Mask Set - RW */ +#define E1000_IMC 0x000D8 /* Interrupt Mask Clear - WO */ +#define E1000_IAM 0x000E0 /* Interrupt Acknowledge Auto Mask */ +#define E1000_RCTL 0x00100 /* RX Control - RW */ +#define E1000_RDTR1 0x02820 /* RX Delay Timer (1) - RW */ +#define E1000_RDBAL1 0x02900 /* RX Descriptor Base Address Low (1) - RW */ +#define E1000_RDBAH1 0x02904 /* RX Descriptor Base Address High (1) - RW */ +#define E1000_RDLEN1 0x02908 /* RX Descriptor Length (1) - RW */ +#define E1000_RDH1 0x02910 /* RX Descriptor Head (1) - RW */ +#define E1000_RDT1 0x02918 /* RX Descriptor Tail (1) - RW */ +#define E1000_FCTTV 0x00170 /* Flow Control Transmit Timer Value - RW */ +#define E1000_TXCW 0x00178 /* TX Configuration Word - RW */ +#define E1000_RXCW 0x00180 /* RX Configuration Word - RO */ +#define E1000_TCTL 0x00400 /* TX Control - RW */ +#define E1000_TCTL_EXT 0x00404 /* Extended TX Control - RW */ +#define E1000_TIPG 0x00410 /* TX Inter-packet gap -RW */ +#define E1000_TBT 0x00448 /* TX Burst Timer - RW */ +#define E1000_AIT 0x00458 /* Adaptive Interframe Spacing Throttle - RW */ +#define E1000_LEDCTL 0x00E00 /* LED Control - RW */ +#define E1000_EXTCNF_CTRL 0x00F00 /* Extended Configuration Control */ +#define E1000_EXTCNF_SIZE 0x00F08 /* Extended Configuration Size */ +#define E1000_PHY_CTRL 0x00F10 /* PHY Control Register in CSR */ #define FEXTNVM_SW_CONFIG 0x0001 -#define E1000_PBA 0x01000 /* Packet Buffer Allocation - RW */ -#define E1000_PBS 0x01008 /* Packet Buffer Size */ -#define E1000_EEMNGCTL 0x01010 /* MNG EEprom Control */ +#define E1000_PBA 0x01000 /* Packet Buffer Allocation - RW */ +#define E1000_PBS 0x01008 /* Packet Buffer Size */ +#define E1000_EEMNGCTL 0x01010 /* MNG EEprom Control */ #define E1000_FLASH_UPDATES 1000 -#define E1000_EEARBC 0x01024 /* EEPROM Auto Read Bus Control */ -#define E1000_FLASHT 0x01028 /* FLASH Timer Register */ -#define E1000_EEWR 0x0102C /* EEPROM Write Register - RW */ -#define E1000_FLSWCTL 0x01030 /* FLASH control register */ -#define E1000_FLSWDATA 0x01034 /* FLASH data register */ -#define E1000_FLSWCNT 0x01038 /* FLASH Access Counter */ -#define E1000_FLOP 0x0103C /* FLASH Opcode Register */ -#define E1000_ERT 0x02008 /* Early Rx Threshold - RW */ -#define E1000_FCRTL 0x02160 /* Flow Control Receive Threshold Low - RW */ -#define E1000_FCRTH 0x02168 /* Flow Control Receive Threshold High - RW */ -#define E1000_PSRCTL 0x02170 /* Packet Split Receive Control - RW */ -#define E1000_RDBAL 0x02800 /* RX Descriptor Base Address Low - RW */ -#define E1000_RDBAH 0x02804 /* RX Descriptor Base Address High - RW */ -#define E1000_RDLEN 0x02808 /* RX Descriptor Length - RW */ -#define E1000_RDH 0x02810 /* RX Descriptor Head - RW */ -#define E1000_RDT 0x02818 /* RX Descriptor Tail - RW */ -#define E1000_RDTR 0x02820 /* RX Delay Timer - RW */ -#define E1000_RDBAL0 E1000_RDBAL /* RX Desc Base Address Low (0) - RW */ -#define E1000_RDBAH0 E1000_RDBAH /* RX Desc Base Address High (0) - RW */ -#define E1000_RDLEN0 E1000_RDLEN /* RX Desc Length (0) - RW */ -#define E1000_RDH0 E1000_RDH /* RX Desc Head (0) - RW */ -#define E1000_RDT0 E1000_RDT /* RX Desc Tail (0) - RW */ -#define E1000_RDTR0 E1000_RDTR /* RX Delay Timer (0) - RW */ -#define E1000_RXDCTL 0x02828 /* RX Descriptor Control queue 0 - RW */ -#define E1000_RXDCTL1 0x02928 /* RX Descriptor Control queue 1 - RW */ -#define E1000_RADV 0x0282C /* RX Interrupt Absolute Delay Timer - RW */ -#define E1000_RSRPD 0x02C00 /* RX Small Packet Detect - RW */ -#define E1000_RAID 0x02C08 /* Receive Ack Interrupt Delay - RW */ -#define E1000_TXDMAC 0x03000 /* TX DMA Control - RW */ -#define E1000_KABGTXD 0x03004 /* AFE Band Gap Transmit Ref Data */ -#define E1000_TDFH 0x03410 /* TX Data FIFO Head - RW */ -#define E1000_TDFT 0x03418 /* TX Data FIFO Tail - RW */ -#define E1000_TDFHS 0x03420 /* TX Data FIFO Head Saved - RW */ -#define E1000_TDFTS 0x03428 /* TX Data FIFO Tail Saved - RW */ -#define E1000_TDFPC 0x03430 /* TX Data FIFO Packet Count - RW */ -#define E1000_TDBAL 0x03800 /* TX Descriptor Base Address Low - RW */ -#define E1000_TDBAH 0x03804 /* TX Descriptor Base Address High - RW */ -#define E1000_TDLEN 0x03808 /* TX Descriptor Length - RW */ -#define E1000_TDH 0x03810 /* TX Descriptor Head - RW */ -#define E1000_TDT 0x03818 /* TX Descripotr Tail - RW */ -#define E1000_TIDV 0x03820 /* TX Interrupt Delay Value - RW */ -#define E1000_TXDCTL 0x03828 /* TX Descriptor Control - RW */ -#define E1000_TADV 0x0382C /* TX Interrupt Absolute Delay Val - RW */ -#define E1000_TSPMT 0x03830 /* TCP Segmentation PAD & Min Threshold - RW */ -#define E1000_TARC0 0x03840 /* TX Arbitration Count (0) */ -#define E1000_TDBAL1 0x03900 /* TX Desc Base Address Low (1) - RW */ -#define E1000_TDBAH1 0x03904 /* TX Desc Base Address High (1) - RW */ -#define E1000_TDLEN1 0x03908 /* TX Desc Length (1) - RW */ -#define E1000_TDH1 0x03910 /* TX Desc Head (1) - RW */ -#define E1000_TDT1 0x03918 /* TX Desc Tail (1) - RW */ -#define E1000_TXDCTL1 0x03928 /* TX Descriptor Control (1) - RW */ -#define E1000_TARC1 0x03940 /* TX Arbitration Count (1) */ -#define E1000_CRCERRS 0x04000 /* CRC Error Count - R/clr */ -#define E1000_ALGNERRC 0x04004 /* Alignment Error Count - R/clr */ -#define E1000_SYMERRS 0x04008 /* Symbol Error Count - R/clr */ -#define E1000_RXERRC 0x0400C /* Receive Error Count - R/clr */ -#define E1000_MPC 0x04010 /* Missed Packet Count - R/clr */ -#define E1000_SCC 0x04014 /* Single Collision Count - R/clr */ -#define E1000_ECOL 0x04018 /* Excessive Collision Count - R/clr */ -#define E1000_MCC 0x0401C /* Multiple Collision Count - R/clr */ -#define E1000_LATECOL 0x04020 /* Late Collision Count - R/clr */ -#define E1000_COLC 0x04028 /* Collision Count - R/clr */ -#define E1000_DC 0x04030 /* Defer Count - R/clr */ -#define E1000_TNCRS 0x04034 /* TX-No CRS - R/clr */ -#define E1000_SEC 0x04038 /* Sequence Error Count - R/clr */ -#define E1000_CEXTERR 0x0403C /* Carrier Extension Error Count - R/clr */ -#define E1000_RLEC 0x04040 /* Receive Length Error Count - R/clr */ -#define E1000_XONRXC 0x04048 /* XON RX Count - R/clr */ -#define E1000_XONTXC 0x0404C /* XON TX Count - R/clr */ -#define E1000_XOFFRXC 0x04050 /* XOFF RX Count - R/clr */ -#define E1000_XOFFTXC 0x04054 /* XOFF TX Count - R/clr */ -#define E1000_FCRUC 0x04058 /* Flow Control RX Unsupported Count- R/clr */ -#define E1000_PRC64 0x0405C /* Packets RX (64 bytes) - R/clr */ -#define E1000_PRC127 0x04060 /* Packets RX (65-127 bytes) - R/clr */ -#define E1000_PRC255 0x04064 /* Packets RX (128-255 bytes) - R/clr */ -#define E1000_PRC511 0x04068 /* Packets RX (255-511 bytes) - R/clr */ -#define E1000_PRC1023 0x0406C /* Packets RX (512-1023 bytes) - R/clr */ -#define E1000_PRC1522 0x04070 /* Packets RX (1024-1522 bytes) - R/clr */ -#define E1000_GPRC 0x04074 /* Good Packets RX Count - R/clr */ -#define E1000_BPRC 0x04078 /* Broadcast Packets RX Count - R/clr */ -#define E1000_MPRC 0x0407C /* Multicast Packets RX Count - R/clr */ -#define E1000_GPTC 0x04080 /* Good Packets TX Count - R/clr */ -#define E1000_GORCL 0x04088 /* Good Octets RX Count Low - R/clr */ -#define E1000_GORCH 0x0408C /* Good Octets RX Count High - R/clr */ -#define E1000_GOTCL 0x04090 /* Good Octets TX Count Low - R/clr */ -#define E1000_GOTCH 0x04094 /* Good Octets TX Count High - R/clr */ -#define E1000_RNBC 0x040A0 /* RX No Buffers Count - R/clr */ -#define E1000_RUC 0x040A4 /* RX Undersize Count - R/clr */ -#define E1000_RFC 0x040A8 /* RX Fragment Count - R/clr */ -#define E1000_ROC 0x040AC /* RX Oversize Count - R/clr */ -#define E1000_RJC 0x040B0 /* RX Jabber Count - R/clr */ -#define E1000_MGTPRC 0x040B4 /* Management Packets RX Count - R/clr */ -#define E1000_MGTPDC 0x040B8 /* Management Packets Dropped Count - R/clr */ -#define E1000_MGTPTC 0x040BC /* Management Packets TX Count - R/clr */ -#define E1000_TORL 0x040C0 /* Total Octets RX Low - R/clr */ -#define E1000_TORH 0x040C4 /* Total Octets RX High - R/clr */ -#define E1000_TOTL 0x040C8 /* Total Octets TX Low - R/clr */ -#define E1000_TOTH 0x040CC /* Total Octets TX High - R/clr */ -#define E1000_TPR 0x040D0 /* Total Packets RX - R/clr */ -#define E1000_TPT 0x040D4 /* Total Packets TX - R/clr */ -#define E1000_PTC64 0x040D8 /* Packets TX (64 bytes) - R/clr */ -#define E1000_PTC127 0x040DC /* Packets TX (65-127 bytes) - R/clr */ -#define E1000_PTC255 0x040E0 /* Packets TX (128-255 bytes) - R/clr */ -#define E1000_PTC511 0x040E4 /* Packets TX (256-511 bytes) - R/clr */ -#define E1000_PTC1023 0x040E8 /* Packets TX (512-1023 bytes) - R/clr */ -#define E1000_PTC1522 0x040EC /* Packets TX (1024-1522 Bytes) - R/clr */ -#define E1000_MPTC 0x040F0 /* Multicast Packets TX Count - R/clr */ -#define E1000_BPTC 0x040F4 /* Broadcast Packets TX Count - R/clr */ -#define E1000_TSCTC 0x040F8 /* TCP Segmentation Context TX - R/clr */ -#define E1000_TSCTFC 0x040FC /* TCP Segmentation Context TX Fail - R/clr */ -#define E1000_IAC 0x04100 /* Interrupt Assertion Count */ -#define E1000_ICRXPTC 0x04104 /* Interrupt Cause Rx Packet Timer Expire Count */ -#define E1000_ICRXATC 0x04108 /* Interrupt Cause Rx Absolute Timer Expire Count */ -#define E1000_ICTXPTC 0x0410C /* Interrupt Cause Tx Packet Timer Expire Count */ -#define E1000_ICTXATC 0x04110 /* Interrupt Cause Tx Absolute Timer Expire Count */ -#define E1000_ICTXQEC 0x04118 /* Interrupt Cause Tx Queue Empty Count */ -#define E1000_ICTXQMTC 0x0411C /* Interrupt Cause Tx Queue Minimum Threshold Count */ -#define E1000_ICRXDMTC 0x04120 /* Interrupt Cause Rx Descriptor Minimum Threshold Count */ -#define E1000_ICRXOC 0x04124 /* Interrupt Cause Receiver Overrun Count */ -#define E1000_RXCSUM 0x05000 /* RX Checksum Control - RW */ -#define E1000_RFCTL 0x05008 /* Receive Filter Control*/ -#define E1000_MTA 0x05200 /* Multicast Table Array - RW Array */ -#define E1000_RA 0x05400 /* Receive Address - RW Array */ -#define E1000_VFTA 0x05600 /* VLAN Filter Table Array - RW Array */ -#define E1000_WUC 0x05800 /* Wakeup Control - RW */ -#define E1000_WUFC 0x05808 /* Wakeup Filter Control - RW */ -#define E1000_WUS 0x05810 /* Wakeup Status - RO */ -#define E1000_MANC 0x05820 /* Management Control - RW */ -#define E1000_IPAV 0x05838 /* IP Address Valid - RW */ -#define E1000_IP4AT 0x05840 /* IPv4 Address Table - RW Array */ -#define E1000_IP6AT 0x05880 /* IPv6 Address Table - RW Array */ -#define E1000_WUPL 0x05900 /* Wakeup Packet Length - RW */ -#define E1000_WUPM 0x05A00 /* Wakeup Packet Memory - RO A */ -#define E1000_FFLT 0x05F00 /* Flexible Filter Length Table - RW Array */ -#define E1000_HOST_IF 0x08800 /* Host Interface */ -#define E1000_FFMT 0x09000 /* Flexible Filter Mask Table - RW Array */ -#define E1000_FFVT 0x09800 /* Flexible Filter Value Table - RW Array */ - -#define E1000_KUMCTRLSTA 0x00034 /* MAC-PHY interface - RW */ -#define E1000_MDPHYA 0x0003C /* PHY address - RW */ -#define E1000_MANC2H 0x05860 /* Managment Control To Host - RW */ -#define E1000_SW_FW_SYNC 0x05B5C /* Software-Firmware Synchronization - RW */ - -#define E1000_GCR 0x05B00 /* PCI-Ex Control */ -#define E1000_GSCL_1 0x05B10 /* PCI-Ex Statistic Control #1 */ -#define E1000_GSCL_2 0x05B14 /* PCI-Ex Statistic Control #2 */ -#define E1000_GSCL_3 0x05B18 /* PCI-Ex Statistic Control #3 */ -#define E1000_GSCL_4 0x05B1C /* PCI-Ex Statistic Control #4 */ -#define E1000_FACTPS 0x05B30 /* Function Active and Power State to MNG */ -#define E1000_SWSM 0x05B50 /* SW Semaphore */ -#define E1000_FWSM 0x05B54 /* FW Semaphore */ -#define E1000_FFLT_DBG 0x05F04 /* Debug Register */ -#define E1000_HICR 0x08F00 /* Host Inteface Control */ +#define E1000_EEARBC 0x01024 /* EEPROM Auto Read Bus Control */ +#define E1000_FLASHT 0x01028 /* FLASH Timer Register */ +#define E1000_EEWR 0x0102C /* EEPROM Write Register - RW */ +#define E1000_FLSWCTL 0x01030 /* FLASH control register */ +#define E1000_FLSWDATA 0x01034 /* FLASH data register */ +#define E1000_FLSWCNT 0x01038 /* FLASH Access Counter */ +#define E1000_FLOP 0x0103C /* FLASH Opcode Register */ +#define E1000_ERT 0x02008 /* Early Rx Threshold - RW */ +#define E1000_FCRTL 0x02160 /* Flow Control Receive Threshold Low - RW */ +#define E1000_FCRTH 0x02168 /* Flow Control Receive Threshold High - RW */ +#define E1000_PSRCTL 0x02170 /* Packet Split Receive Control - RW */ +#define E1000_RDBAL 0x02800 /* RX Descriptor Base Address Low - RW */ +#define E1000_RDBAH 0x02804 /* RX Descriptor Base Address High - RW */ +#define E1000_RDLEN 0x02808 /* RX Descriptor Length - RW */ +#define E1000_RDH 0x02810 /* RX Descriptor Head - RW */ +#define E1000_RDT 0x02818 /* RX Descriptor Tail - RW */ +#define E1000_RDTR 0x02820 /* RX Delay Timer - RW */ +#define E1000_RDBAL0 E1000_RDBAL /* RX Desc Base Address Low (0) - RW */ +#define E1000_RDBAH0 E1000_RDBAH /* RX Desc Base Address High (0) - RW */ +#define E1000_RDLEN0 E1000_RDLEN /* RX Desc Length (0) - RW */ +#define E1000_RDH0 E1000_RDH /* RX Desc Head (0) - RW */ +#define E1000_RDT0 E1000_RDT /* RX Desc Tail (0) - RW */ +#define E1000_RDTR0 E1000_RDTR /* RX Delay Timer (0) - RW */ +#define E1000_RXDCTL 0x02828 /* RX Descriptor Control queue 0 - RW */ +#define E1000_RXDCTL1 0x02928 /* RX Descriptor Control queue 1 - RW */ +#define E1000_RADV 0x0282C /* RX Interrupt Absolute Delay Timer - RW */ +#define E1000_RSRPD 0x02C00 /* RX Small Packet Detect - RW */ +#define E1000_RAID 0x02C08 /* Receive Ack Interrupt Delay - RW */ +#define E1000_TXDMAC 0x03000 /* TX DMA Control - RW */ +#define E1000_KABGTXD 0x03004 /* AFE Band Gap Transmit Ref Data */ +#define E1000_TDFH 0x03410 /* TX Data FIFO Head - RW */ +#define E1000_TDFT 0x03418 /* TX Data FIFO Tail - RW */ +#define E1000_TDFHS 0x03420 /* TX Data FIFO Head Saved - RW */ +#define E1000_TDFTS 0x03428 /* TX Data FIFO Tail Saved - RW */ +#define E1000_TDFPC 0x03430 /* TX Data FIFO Packet Count - RW */ +#define E1000_TDBAL 0x03800 /* TX Descriptor Base Address Low - RW */ +#define E1000_TDBAH 0x03804 /* TX Descriptor Base Address High - RW */ +#define E1000_TDLEN 0x03808 /* TX Descriptor Length - RW */ +#define E1000_TDH 0x03810 /* TX Descriptor Head - RW */ +#define E1000_TDT 0x03818 /* TX Descripotr Tail - RW */ +#define E1000_TIDV 0x03820 /* TX Interrupt Delay Value - RW */ +#define E1000_TXDCTL 0x03828 /* TX Descriptor Control - RW */ +#define E1000_TADV 0x0382C /* TX Interrupt Absolute Delay Val - RW */ +#define E1000_TSPMT 0x03830 /* TCP Segmentation PAD & Min Threshold - RW */ +#define E1000_TARC0 0x03840 /* TX Arbitration Count (0) */ +#define E1000_TDBAL1 0x03900 /* TX Desc Base Address Low (1) - RW */ +#define E1000_TDBAH1 0x03904 /* TX Desc Base Address High (1) - RW */ +#define E1000_TDLEN1 0x03908 /* TX Desc Length (1) - RW */ +#define E1000_TDH1 0x03910 /* TX Desc Head (1) - RW */ +#define E1000_TDT1 0x03918 /* TX Desc Tail (1) - RW */ +#define E1000_TXDCTL1 0x03928 /* TX Descriptor Control (1) - RW */ +#define E1000_TARC1 0x03940 /* TX Arbitration Count (1) */ +#define E1000_CRCERRS 0x04000 /* CRC Error Count - R/clr */ +#define E1000_ALGNERRC 0x04004 /* Alignment Error Count - R/clr */ +#define E1000_SYMERRS 0x04008 /* Symbol Error Count - R/clr */ +#define E1000_RXERRC 0x0400C /* Receive Error Count - R/clr */ +#define E1000_MPC 0x04010 /* Missed Packet Count - R/clr */ +#define E1000_SCC 0x04014 /* Single Collision Count - R/clr */ +#define E1000_ECOL 0x04018 /* Excessive Collision Count - R/clr */ +#define E1000_MCC 0x0401C /* Multiple Collision Count - R/clr */ +#define E1000_LATECOL 0x04020 /* Late Collision Count - R/clr */ +#define E1000_COLC 0x04028 /* Collision Count - R/clr */ +#define E1000_DC 0x04030 /* Defer Count - R/clr */ +#define E1000_TNCRS 0x04034 /* TX-No CRS - R/clr */ +#define E1000_SEC 0x04038 /* Sequence Error Count - R/clr */ +#define E1000_CEXTERR 0x0403C /* Carrier Extension Error Count - R/clr */ +#define E1000_RLEC 0x04040 /* Receive Length Error Count - R/clr */ +#define E1000_XONRXC 0x04048 /* XON RX Count - R/clr */ +#define E1000_XONTXC 0x0404C /* XON TX Count - R/clr */ +#define E1000_XOFFRXC 0x04050 /* XOFF RX Count - R/clr */ +#define E1000_XOFFTXC 0x04054 /* XOFF TX Count - R/clr */ +#define E1000_FCRUC 0x04058 /* Flow Control RX Unsupported Count- R/clr */ +#define E1000_PRC64 0x0405C /* Packets RX (64 bytes) - R/clr */ +#define E1000_PRC127 0x04060 /* Packets RX (65-127 bytes) - R/clr */ +#define E1000_PRC255 0x04064 /* Packets RX (128-255 bytes) - R/clr */ +#define E1000_PRC511 0x04068 /* Packets RX (255-511 bytes) - R/clr */ +#define E1000_PRC1023 0x0406C /* Packets RX (512-1023 bytes) - R/clr */ +#define E1000_PRC1522 0x04070 /* Packets RX (1024-1522 bytes) - R/clr */ +#define E1000_GPRC 0x04074 /* Good Packets RX Count - R/clr */ +#define E1000_BPRC 0x04078 /* Broadcast Packets RX Count - R/clr */ +#define E1000_MPRC 0x0407C /* Multicast Packets RX Count - R/clr */ +#define E1000_GPTC 0x04080 /* Good Packets TX Count - R/clr */ +#define E1000_GORCL 0x04088 /* Good Octets RX Count Low - R/clr */ +#define E1000_GORCH 0x0408C /* Good Octets RX Count High - R/clr */ +#define E1000_GOTCL 0x04090 /* Good Octets TX Count Low - R/clr */ +#define E1000_GOTCH 0x04094 /* Good Octets TX Count High - R/clr */ +#define E1000_RNBC 0x040A0 /* RX No Buffers Count - R/clr */ +#define E1000_RUC 0x040A4 /* RX Undersize Count - R/clr */ +#define E1000_RFC 0x040A8 /* RX Fragment Count - R/clr */ +#define E1000_ROC 0x040AC /* RX Oversize Count - R/clr */ +#define E1000_RJC 0x040B0 /* RX Jabber Count - R/clr */ +#define E1000_MGTPRC 0x040B4 /* Management Packets RX Count - R/clr */ +#define E1000_MGTPDC 0x040B8 /* Management Packets Dropped Count - R/clr */ +#define E1000_MGTPTC 0x040BC /* Management Packets TX Count - R/clr */ +#define E1000_TORL 0x040C0 /* Total Octets RX Low - R/clr */ +#define E1000_TORH 0x040C4 /* Total Octets RX High - R/clr */ +#define E1000_TOTL 0x040C8 /* Total Octets TX Low - R/clr */ +#define E1000_TOTH 0x040CC /* Total Octets TX High - R/clr */ +#define E1000_TPR 0x040D0 /* Total Packets RX - R/clr */ +#define E1000_TPT 0x040D4 /* Total Packets TX - R/clr */ +#define E1000_PTC64 0x040D8 /* Packets TX (64 bytes) - R/clr */ +#define E1000_PTC127 0x040DC /* Packets TX (65-127 bytes) - R/clr */ +#define E1000_PTC255 0x040E0 /* Packets TX (128-255 bytes) - R/clr */ +#define E1000_PTC511 0x040E4 /* Packets TX (256-511 bytes) - R/clr */ +#define E1000_PTC1023 0x040E8 /* Packets TX (512-1023 bytes) - R/clr */ +#define E1000_PTC1522 0x040EC /* Packets TX (1024-1522 Bytes) - R/clr */ +#define E1000_MPTC 0x040F0 /* Multicast Packets TX Count - R/clr */ +#define E1000_BPTC 0x040F4 /* Broadcast Packets TX Count - R/clr */ +#define E1000_TSCTC 0x040F8 /* TCP Segmentation Context TX - R/clr */ +#define E1000_TSCTFC 0x040FC /* TCP Segmentation Context TX Fail - R/clr */ +#define E1000_IAC 0x04100 /* Interrupt Assertion Count */ +#define E1000_ICRXPTC 0x04104 /* Interrupt Cause Rx Packet Timer Expire Count */ +#define E1000_ICRXATC 0x04108 /* Interrupt Cause Rx Absolute Timer Expire Count */ +#define E1000_ICTXPTC 0x0410C /* Interrupt Cause Tx Packet Timer Expire Count */ +#define E1000_ICTXATC 0x04110 /* Interrupt Cause Tx Absolute Timer Expire Count */ +#define E1000_ICTXQEC 0x04118 /* Interrupt Cause Tx Queue Empty Count */ +#define E1000_ICTXQMTC 0x0411C /* Interrupt Cause Tx Queue Minimum Threshold Count */ +#define E1000_ICRXDMTC 0x04120 /* Interrupt Cause Rx Descriptor Minimum Threshold Count */ +#define E1000_ICRXOC 0x04124 /* Interrupt Cause Receiver Overrun Count */ +#define E1000_RXCSUM 0x05000 /* RX Checksum Control - RW */ +#define E1000_RFCTL 0x05008 /* Receive Filter Control */ +#define E1000_MTA 0x05200 /* Multicast Table Array - RW Array */ +#define E1000_RA 0x05400 /* Receive Address - RW Array */ +#define E1000_VFTA 0x05600 /* VLAN Filter Table Array - RW Array */ +#define E1000_WUC 0x05800 /* Wakeup Control - RW */ +#define E1000_WUFC 0x05808 /* Wakeup Filter Control - RW */ +#define E1000_WUS 0x05810 /* Wakeup Status - RO */ +#define E1000_MANC 0x05820 /* Management Control - RW */ +#define E1000_IPAV 0x05838 /* IP Address Valid - RW */ +#define E1000_IP4AT 0x05840 /* IPv4 Address Table - RW Array */ +#define E1000_IP6AT 0x05880 /* IPv6 Address Table - RW Array */ +#define E1000_WUPL 0x05900 /* Wakeup Packet Length - RW */ +#define E1000_WUPM 0x05A00 /* Wakeup Packet Memory - RO A */ +#define E1000_FFLT 0x05F00 /* Flexible Filter Length Table - RW Array */ +#define E1000_HOST_IF 0x08800 /* Host Interface */ +#define E1000_FFMT 0x09000 /* Flexible Filter Mask Table - RW Array */ +#define E1000_FFVT 0x09800 /* Flexible Filter Value Table - RW Array */ + +#define E1000_KUMCTRLSTA 0x00034 /* MAC-PHY interface - RW */ +#define E1000_MDPHYA 0x0003C /* PHY address - RW */ +#define E1000_MANC2H 0x05860 /* Managment Control To Host - RW */ +#define E1000_SW_FW_SYNC 0x05B5C /* Software-Firmware Synchronization - RW */ + +#define E1000_GCR 0x05B00 /* PCI-Ex Control */ +#define E1000_GSCL_1 0x05B10 /* PCI-Ex Statistic Control #1 */ +#define E1000_GSCL_2 0x05B14 /* PCI-Ex Statistic Control #2 */ +#define E1000_GSCL_3 0x05B18 /* PCI-Ex Statistic Control #3 */ +#define E1000_GSCL_4 0x05B1C /* PCI-Ex Statistic Control #4 */ +#define E1000_FACTPS 0x05B30 /* Function Active and Power State to MNG */ +#define E1000_SWSM 0x05B50 /* SW Semaphore */ +#define E1000_FWSM 0x05B54 /* FW Semaphore */ +#define E1000_FFLT_DBG 0x05F04 /* Debug Register */ +#define E1000_HICR 0x08F00 /* Host Interface Control */ /* RSS registers */ -#define E1000_CPUVEC 0x02C10 /* CPU Vector Register - RW */ -#define E1000_MRQC 0x05818 /* Multiple Receive Control - RW */ -#define E1000_RETA 0x05C00 /* Redirection Table - RW Array */ -#define E1000_RSSRK 0x05C80 /* RSS Random Key - RW Array */ -#define E1000_RSSIM 0x05864 /* RSS Interrupt Mask */ -#define E1000_RSSIR 0x05868 /* RSS Interrupt Request */ +#define E1000_CPUVEC 0x02C10 /* CPU Vector Register - RW */ +#define E1000_MRQC 0x05818 /* Multiple Receive Control - RW */ +#define E1000_RETA 0x05C00 /* Redirection Table - RW Array */ +#define E1000_RSSRK 0x05C80 /* RSS Random Key - RW Array */ +#define E1000_RSSIM 0x05864 /* RSS Interrupt Mask */ +#define E1000_RSSIR 0x05868 /* RSS Interrupt Request */ /* Register Set (82542) * * Some of the 82542 registers are located at different offsets than they are @@ -1123,19 +1043,19 @@ struct e1000_ffvt_entry { #define E1000_82542_RDLEN0 E1000_82542_RDLEN #define E1000_82542_RDH0 E1000_82542_RDH #define E1000_82542_RDT0 E1000_82542_RDT -#define E1000_82542_SRRCTL(_n) (0x280C + ((_n) << 8)) /* Split and Replication - * RX Control - RW */ +#define E1000_82542_SRRCTL(_n) (0x280C + ((_n) << 8)) /* Split and Replication + * RX Control - RW */ #define E1000_82542_DCA_RXCTRL(_n) (0x02814 + ((_n) << 8)) -#define E1000_82542_RDBAH3 0x02B04 /* RX Desc Base High Queue 3 - RW */ -#define E1000_82542_RDBAL3 0x02B00 /* RX Desc Low Queue 3 - RW */ -#define E1000_82542_RDLEN3 0x02B08 /* RX Desc Length Queue 3 - RW */ -#define E1000_82542_RDH3 0x02B10 /* RX Desc Head Queue 3 - RW */ -#define E1000_82542_RDT3 0x02B18 /* RX Desc Tail Queue 3 - RW */ -#define E1000_82542_RDBAL2 0x02A00 /* RX Desc Base Low Queue 2 - RW */ -#define E1000_82542_RDBAH2 0x02A04 /* RX Desc Base High Queue 2 - RW */ -#define E1000_82542_RDLEN2 0x02A08 /* RX Desc Length Queue 2 - RW */ -#define E1000_82542_RDH2 0x02A10 /* RX Desc Head Queue 2 - RW */ -#define E1000_82542_RDT2 0x02A18 /* RX Desc Tail Queue 2 - RW */ +#define E1000_82542_RDBAH3 0x02B04 /* RX Desc Base High Queue 3 - RW */ +#define E1000_82542_RDBAL3 0x02B00 /* RX Desc Low Queue 3 - RW */ +#define E1000_82542_RDLEN3 0x02B08 /* RX Desc Length Queue 3 - RW */ +#define E1000_82542_RDH3 0x02B10 /* RX Desc Head Queue 3 - RW */ +#define E1000_82542_RDT3 0x02B18 /* RX Desc Tail Queue 3 - RW */ +#define E1000_82542_RDBAL2 0x02A00 /* RX Desc Base Low Queue 2 - RW */ +#define E1000_82542_RDBAH2 0x02A04 /* RX Desc Base High Queue 2 - RW */ +#define E1000_82542_RDLEN2 0x02A08 /* RX Desc Length Queue 2 - RW */ +#define E1000_82542_RDH2 0x02A10 /* RX Desc Head Queue 2 - RW */ +#define E1000_82542_RDT2 0x02A18 /* RX Desc Tail Queue 2 - RW */ #define E1000_82542_RDTR1 0x00130 #define E1000_82542_RDBAL1 0x00138 #define E1000_82542_RDBAH1 0x0013C @@ -1302,288 +1222,281 @@ struct e1000_ffvt_entry { #define E1000_82542_RSSIR E1000_RSSIR #define E1000_82542_KUMCTRLSTA E1000_KUMCTRLSTA #define E1000_82542_SW_FW_SYNC E1000_SW_FW_SYNC -#define E1000_82542_MANC2H E1000_MANC2H /* Statistics counters collected by the MAC */ struct e1000_hw_stats { - u64 crcerrs; - u64 algnerrc; - u64 symerrs; - u64 rxerrc; - u64 txerrc; - u64 mpc; - u64 scc; - u64 ecol; - u64 mcc; - u64 latecol; - u64 colc; - u64 dc; - u64 tncrs; - u64 sec; - u64 cexterr; - u64 rlec; - u64 xonrxc; - u64 xontxc; - u64 xoffrxc; - u64 xofftxc; - u64 fcruc; - u64 prc64; - u64 prc127; - u64 prc255; - u64 prc511; - u64 prc1023; - u64 prc1522; - u64 gprc; - u64 bprc; - u64 mprc; - u64 gptc; - u64 gorcl; - u64 gorch; - u64 gotcl; - u64 gotch; - u64 rnbc; - u64 ruc; - u64 rfc; - u64 roc; - u64 rlerrc; - u64 rjc; - u64 mgprc; - u64 mgpdc; - u64 mgptc; - u64 torl; - u64 torh; - u64 totl; - u64 toth; - u64 tpr; - u64 tpt; - u64 ptc64; - u64 ptc127; - u64 ptc255; - u64 ptc511; - u64 ptc1023; - u64 ptc1522; - u64 mptc; - u64 bptc; - u64 tsctc; - u64 tsctfc; - u64 iac; - u64 icrxptc; - u64 icrxatc; - u64 ictxptc; - u64 ictxatc; - u64 ictxqec; - u64 ictxqmtc; - u64 icrxdmtc; - u64 icrxoc; + u64 crcerrs; + u64 algnerrc; + u64 symerrs; + u64 rxerrc; + u64 txerrc; + u64 mpc; + u64 scc; + u64 ecol; + u64 mcc; + u64 latecol; + u64 colc; + u64 dc; + u64 tncrs; + u64 sec; + u64 cexterr; + u64 rlec; + u64 xonrxc; + u64 xontxc; + u64 xoffrxc; + u64 xofftxc; + u64 fcruc; + u64 prc64; + u64 prc127; + u64 prc255; + u64 prc511; + u64 prc1023; + u64 prc1522; + u64 gprc; + u64 bprc; + u64 mprc; + u64 gptc; + u64 gorcl; + u64 gorch; + u64 gotcl; + u64 gotch; + u64 rnbc; + u64 ruc; + u64 rfc; + u64 roc; + u64 rlerrc; + u64 rjc; + u64 mgprc; + u64 mgpdc; + u64 mgptc; + u64 torl; + u64 torh; + u64 totl; + u64 toth; + u64 tpr; + u64 tpt; + u64 ptc64; + u64 ptc127; + u64 ptc255; + u64 ptc511; + u64 ptc1023; + u64 ptc1522; + u64 mptc; + u64 bptc; + u64 tsctc; + u64 tsctfc; + u64 iac; + u64 icrxptc; + u64 icrxatc; + u64 ictxptc; + u64 ictxatc; + u64 ictxqec; + u64 ictxqmtc; + u64 icrxdmtc; + u64 icrxoc; }; /* Structure containing variables used by the shared code (e1000_hw.c) */ struct e1000_hw { - u8 __iomem *hw_addr; - u8 __iomem *flash_address; - e1000_mac_type mac_type; - e1000_phy_type phy_type; - u32 phy_init_script; - e1000_media_type media_type; - void *back; - struct e1000_shadow_ram *eeprom_shadow_ram; - u32 flash_bank_size; - u32 flash_base_addr; - e1000_fc_type fc; - e1000_bus_speed bus_speed; - e1000_bus_width bus_width; - e1000_bus_type bus_type; + u8 __iomem *hw_addr; + u8 __iomem *flash_address; + e1000_mac_type mac_type; + e1000_phy_type phy_type; + u32 phy_init_script; + e1000_media_type media_type; + void *back; + struct e1000_shadow_ram *eeprom_shadow_ram; + u32 flash_bank_size; + u32 flash_base_addr; + e1000_fc_type fc; + e1000_bus_speed bus_speed; + e1000_bus_width bus_width; + e1000_bus_type bus_type; struct e1000_eeprom_info eeprom; - e1000_ms_type master_slave; - e1000_ms_type original_master_slave; - e1000_ffe_config ffe_config_state; - u32 asf_firmware_present; - u32 eeprom_semaphore_present; - u32 swfw_sync_present; - u32 swfwhw_semaphore_present; - unsigned long io_base; - u32 phy_id; - u32 phy_revision; - u32 phy_addr; - u32 original_fc; - u32 txcw; - u32 autoneg_failed; - u32 max_frame_size; - u32 min_frame_size; - u32 mc_filter_type; - u32 num_mc_addrs; - u32 collision_delta; - u32 tx_packet_delta; - u32 ledctl_default; - u32 ledctl_mode1; - u32 ledctl_mode2; - bool tx_pkt_filtering; + e1000_ms_type master_slave; + e1000_ms_type original_master_slave; + e1000_ffe_config ffe_config_state; + u32 asf_firmware_present; + u32 eeprom_semaphore_present; + unsigned long io_base; + u32 phy_id; + u32 phy_revision; + u32 phy_addr; + u32 original_fc; + u32 txcw; + u32 autoneg_failed; + u32 max_frame_size; + u32 min_frame_size; + u32 mc_filter_type; + u32 num_mc_addrs; + u32 collision_delta; + u32 tx_packet_delta; + u32 ledctl_default; + u32 ledctl_mode1; + u32 ledctl_mode2; + bool tx_pkt_filtering; struct e1000_host_mng_dhcp_cookie mng_cookie; - u16 phy_spd_default; - u16 autoneg_advertised; - u16 pci_cmd_word; - u16 fc_high_water; - u16 fc_low_water; - u16 fc_pause_time; - u16 current_ifs_val; - u16 ifs_min_val; - u16 ifs_max_val; - u16 ifs_step_size; - u16 ifs_ratio; - u16 device_id; - u16 vendor_id; - u16 subsystem_id; - u16 subsystem_vendor_id; - u8 revision_id; - u8 autoneg; - u8 mdix; - u8 forced_speed_duplex; - u8 wait_autoneg_complete; - u8 dma_fairness; - u8 mac_addr[NODE_ADDRESS_SIZE]; - u8 perm_mac_addr[NODE_ADDRESS_SIZE]; - bool disable_polarity_correction; - bool speed_downgraded; - e1000_smart_speed smart_speed; - e1000_dsp_config dsp_config_state; - bool get_link_status; - bool serdes_link_down; - bool tbi_compatibility_en; - bool tbi_compatibility_on; - bool laa_is_present; - bool phy_reset_disable; - bool initialize_hw_bits_disable; - bool fc_send_xon; - bool fc_strict_ieee; - bool report_tx_early; - bool adaptive_ifs; - bool ifs_params_forced; - bool in_ifs_mode; - bool mng_reg_access_disabled; - bool leave_av_bit_off; - bool kmrn_lock_loss_workaround_disabled; - bool bad_tx_carr_stats_fd; - bool has_manc2h; - bool rx_needs_kicking; - bool has_smbus; + u16 phy_spd_default; + u16 autoneg_advertised; + u16 pci_cmd_word; + u16 fc_high_water; + u16 fc_low_water; + u16 fc_pause_time; + u16 current_ifs_val; + u16 ifs_min_val; + u16 ifs_max_val; + u16 ifs_step_size; + u16 ifs_ratio; + u16 device_id; + u16 vendor_id; + u16 subsystem_id; + u16 subsystem_vendor_id; + u8 revision_id; + u8 autoneg; + u8 mdix; + u8 forced_speed_duplex; + u8 wait_autoneg_complete; + u8 dma_fairness; + u8 mac_addr[NODE_ADDRESS_SIZE]; + u8 perm_mac_addr[NODE_ADDRESS_SIZE]; + bool disable_polarity_correction; + bool speed_downgraded; + e1000_smart_speed smart_speed; + e1000_dsp_config dsp_config_state; + bool get_link_status; + bool serdes_has_link; + bool tbi_compatibility_en; + bool tbi_compatibility_on; + bool laa_is_present; + bool phy_reset_disable; + bool initialize_hw_bits_disable; + bool fc_send_xon; + bool fc_strict_ieee; + bool report_tx_early; + bool adaptive_ifs; + bool ifs_params_forced; + bool in_ifs_mode; + bool mng_reg_access_disabled; + bool leave_av_bit_off; + bool bad_tx_carr_stats_fd; + bool has_smbus; }; - -#define E1000_EEPROM_SWDPIN0 0x0001 /* SWDPIN 0 EEPROM Value */ -#define E1000_EEPROM_LED_LOGIC 0x0020 /* Led Logic Word */ -#define E1000_EEPROM_RW_REG_DATA 16 /* Offset to data in EEPROM read/write registers */ -#define E1000_EEPROM_RW_REG_DONE 2 /* Offset to READ/WRITE done bit */ -#define E1000_EEPROM_RW_REG_START 1 /* First bit for telling part to start operation */ -#define E1000_EEPROM_RW_ADDR_SHIFT 2 /* Shift to the address bits */ -#define E1000_EEPROM_POLL_WRITE 1 /* Flag for polling for write complete */ -#define E1000_EEPROM_POLL_READ 0 /* Flag for polling for read complete */ +#define E1000_EEPROM_SWDPIN0 0x0001 /* SWDPIN 0 EEPROM Value */ +#define E1000_EEPROM_LED_LOGIC 0x0020 /* Led Logic Word */ +#define E1000_EEPROM_RW_REG_DATA 16 /* Offset to data in EEPROM read/write registers */ +#define E1000_EEPROM_RW_REG_DONE 2 /* Offset to READ/WRITE done bit */ +#define E1000_EEPROM_RW_REG_START 1 /* First bit for telling part to start operation */ +#define E1000_EEPROM_RW_ADDR_SHIFT 2 /* Shift to the address bits */ +#define E1000_EEPROM_POLL_WRITE 1 /* Flag for polling for write complete */ +#define E1000_EEPROM_POLL_READ 0 /* Flag for polling for read complete */ /* Register Bit Masks */ /* Device Control */ -#define E1000_CTRL_FD 0x00000001 /* Full duplex.0=half; 1=full */ -#define E1000_CTRL_BEM 0x00000002 /* Endian Mode.0=little,1=big */ -#define E1000_CTRL_PRIOR 0x00000004 /* Priority on PCI. 0=rx,1=fair */ -#define E1000_CTRL_GIO_MASTER_DISABLE 0x00000004 /*Blocks new Master requests */ -#define E1000_CTRL_LRST 0x00000008 /* Link reset. 0=normal,1=reset */ -#define E1000_CTRL_TME 0x00000010 /* Test mode. 0=normal,1=test */ -#define E1000_CTRL_SLE 0x00000020 /* Serial Link on 0=dis,1=en */ -#define E1000_CTRL_ASDE 0x00000020 /* Auto-speed detect enable */ -#define E1000_CTRL_SLU 0x00000040 /* Set link up (Force Link) */ -#define E1000_CTRL_ILOS 0x00000080 /* Invert Loss-Of Signal */ -#define E1000_CTRL_SPD_SEL 0x00000300 /* Speed Select Mask */ -#define E1000_CTRL_SPD_10 0x00000000 /* Force 10Mb */ -#define E1000_CTRL_SPD_100 0x00000100 /* Force 100Mb */ -#define E1000_CTRL_SPD_1000 0x00000200 /* Force 1Gb */ -#define E1000_CTRL_BEM32 0x00000400 /* Big Endian 32 mode */ -#define E1000_CTRL_FRCSPD 0x00000800 /* Force Speed */ -#define E1000_CTRL_FRCDPX 0x00001000 /* Force Duplex */ -#define E1000_CTRL_D_UD_EN 0x00002000 /* Dock/Undock enable */ -#define E1000_CTRL_D_UD_POLARITY 0x00004000 /* Defined polarity of Dock/Undock indication in SDP[0] */ -#define E1000_CTRL_FORCE_PHY_RESET 0x00008000 /* Reset both PHY ports, through PHYRST_N pin */ -#define E1000_CTRL_EXT_LINK_EN 0x00010000 /* enable link status from external LINK_0 and LINK_1 pins */ -#define E1000_CTRL_SWDPIN0 0x00040000 /* SWDPIN 0 value */ -#define E1000_CTRL_SWDPIN1 0x00080000 /* SWDPIN 1 value */ -#define E1000_CTRL_SWDPIN2 0x00100000 /* SWDPIN 2 value */ -#define E1000_CTRL_SWDPIN3 0x00200000 /* SWDPIN 3 value */ -#define E1000_CTRL_SWDPIO0 0x00400000 /* SWDPIN 0 Input or output */ -#define E1000_CTRL_SWDPIO1 0x00800000 /* SWDPIN 1 input or output */ -#define E1000_CTRL_SWDPIO2 0x01000000 /* SWDPIN 2 input or output */ -#define E1000_CTRL_SWDPIO3 0x02000000 /* SWDPIN 3 input or output */ -#define E1000_CTRL_RST 0x04000000 /* Global reset */ -#define E1000_CTRL_RFCE 0x08000000 /* Receive Flow Control enable */ -#define E1000_CTRL_TFCE 0x10000000 /* Transmit flow control enable */ -#define E1000_CTRL_RTE 0x20000000 /* Routing tag enable */ -#define E1000_CTRL_VME 0x40000000 /* IEEE VLAN mode enable */ -#define E1000_CTRL_PHY_RST 0x80000000 /* PHY Reset */ -#define E1000_CTRL_SW2FW_INT 0x02000000 /* Initiate an interrupt to manageability engine */ +#define E1000_CTRL_FD 0x00000001 /* Full duplex.0=half; 1=full */ +#define E1000_CTRL_BEM 0x00000002 /* Endian Mode.0=little,1=big */ +#define E1000_CTRL_PRIOR 0x00000004 /* Priority on PCI. 0=rx,1=fair */ +#define E1000_CTRL_GIO_MASTER_DISABLE 0x00000004 /*Blocks new Master requests */ +#define E1000_CTRL_LRST 0x00000008 /* Link reset. 0=normal,1=reset */ +#define E1000_CTRL_TME 0x00000010 /* Test mode. 0=normal,1=test */ +#define E1000_CTRL_SLE 0x00000020 /* Serial Link on 0=dis,1=en */ +#define E1000_CTRL_ASDE 0x00000020 /* Auto-speed detect enable */ +#define E1000_CTRL_SLU 0x00000040 /* Set link up (Force Link) */ +#define E1000_CTRL_ILOS 0x00000080 /* Invert Loss-Of Signal */ +#define E1000_CTRL_SPD_SEL 0x00000300 /* Speed Select Mask */ +#define E1000_CTRL_SPD_10 0x00000000 /* Force 10Mb */ +#define E1000_CTRL_SPD_100 0x00000100 /* Force 100Mb */ +#define E1000_CTRL_SPD_1000 0x00000200 /* Force 1Gb */ +#define E1000_CTRL_BEM32 0x00000400 /* Big Endian 32 mode */ +#define E1000_CTRL_FRCSPD 0x00000800 /* Force Speed */ +#define E1000_CTRL_FRCDPX 0x00001000 /* Force Duplex */ +#define E1000_CTRL_D_UD_EN 0x00002000 /* Dock/Undock enable */ +#define E1000_CTRL_D_UD_POLARITY 0x00004000 /* Defined polarity of Dock/Undock indication in SDP[0] */ +#define E1000_CTRL_FORCE_PHY_RESET 0x00008000 /* Reset both PHY ports, through PHYRST_N pin */ +#define E1000_CTRL_EXT_LINK_EN 0x00010000 /* enable link status from external LINK_0 and LINK_1 pins */ +#define E1000_CTRL_SWDPIN0 0x00040000 /* SWDPIN 0 value */ +#define E1000_CTRL_SWDPIN1 0x00080000 /* SWDPIN 1 value */ +#define E1000_CTRL_SWDPIN2 0x00100000 /* SWDPIN 2 value */ +#define E1000_CTRL_SWDPIN3 0x00200000 /* SWDPIN 3 value */ +#define E1000_CTRL_SWDPIO0 0x00400000 /* SWDPIN 0 Input or output */ +#define E1000_CTRL_SWDPIO1 0x00800000 /* SWDPIN 1 input or output */ +#define E1000_CTRL_SWDPIO2 0x01000000 /* SWDPIN 2 input or output */ +#define E1000_CTRL_SWDPIO3 0x02000000 /* SWDPIN 3 input or output */ +#define E1000_CTRL_RST 0x04000000 /* Global reset */ +#define E1000_CTRL_RFCE 0x08000000 /* Receive Flow Control enable */ +#define E1000_CTRL_TFCE 0x10000000 /* Transmit flow control enable */ +#define E1000_CTRL_RTE 0x20000000 /* Routing tag enable */ +#define E1000_CTRL_VME 0x40000000 /* IEEE VLAN mode enable */ +#define E1000_CTRL_PHY_RST 0x80000000 /* PHY Reset */ +#define E1000_CTRL_SW2FW_INT 0x02000000 /* Initiate an interrupt to manageability engine */ /* Device Status */ -#define E1000_STATUS_FD 0x00000001 /* Full duplex.0=half,1=full */ -#define E1000_STATUS_LU 0x00000002 /* Link up.0=no,1=link */ -#define E1000_STATUS_FUNC_MASK 0x0000000C /* PCI Function Mask */ +#define E1000_STATUS_FD 0x00000001 /* Full duplex.0=half,1=full */ +#define E1000_STATUS_LU 0x00000002 /* Link up.0=no,1=link */ +#define E1000_STATUS_FUNC_MASK 0x0000000C /* PCI Function Mask */ #define E1000_STATUS_FUNC_SHIFT 2 -#define E1000_STATUS_FUNC_0 0x00000000 /* Function 0 */ -#define E1000_STATUS_FUNC_1 0x00000004 /* Function 1 */ -#define E1000_STATUS_TXOFF 0x00000010 /* transmission paused */ -#define E1000_STATUS_TBIMODE 0x00000020 /* TBI mode */ +#define E1000_STATUS_FUNC_0 0x00000000 /* Function 0 */ +#define E1000_STATUS_FUNC_1 0x00000004 /* Function 1 */ +#define E1000_STATUS_TXOFF 0x00000010 /* transmission paused */ +#define E1000_STATUS_TBIMODE 0x00000020 /* TBI mode */ #define E1000_STATUS_SPEED_MASK 0x000000C0 -#define E1000_STATUS_SPEED_10 0x00000000 /* Speed 10Mb/s */ -#define E1000_STATUS_SPEED_100 0x00000040 /* Speed 100Mb/s */ -#define E1000_STATUS_SPEED_1000 0x00000080 /* Speed 1000Mb/s */ -#define E1000_STATUS_LAN_INIT_DONE 0x00000200 /* Lan Init Completion - by EEPROM/Flash */ -#define E1000_STATUS_ASDV 0x00000300 /* Auto speed detect value */ -#define E1000_STATUS_DOCK_CI 0x00000800 /* Change in Dock/Undock state. Clear on write '0'. */ -#define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Status of Master requests. */ -#define E1000_STATUS_MTXCKOK 0x00000400 /* MTX clock running OK */ -#define E1000_STATUS_PCI66 0x00000800 /* In 66Mhz slot */ -#define E1000_STATUS_BUS64 0x00001000 /* In 64 bit slot */ -#define E1000_STATUS_PCIX_MODE 0x00002000 /* PCI-X mode */ -#define E1000_STATUS_PCIX_SPEED 0x0000C000 /* PCI-X bus speed */ -#define E1000_STATUS_BMC_SKU_0 0x00100000 /* BMC USB redirect disabled */ -#define E1000_STATUS_BMC_SKU_1 0x00200000 /* BMC SRAM disabled */ -#define E1000_STATUS_BMC_SKU_2 0x00400000 /* BMC SDRAM disabled */ -#define E1000_STATUS_BMC_CRYPTO 0x00800000 /* BMC crypto disabled */ -#define E1000_STATUS_BMC_LITE 0x01000000 /* BMC external code execution disabled */ -#define E1000_STATUS_RGMII_ENABLE 0x02000000 /* RGMII disabled */ +#define E1000_STATUS_SPEED_10 0x00000000 /* Speed 10Mb/s */ +#define E1000_STATUS_SPEED_100 0x00000040 /* Speed 100Mb/s */ +#define E1000_STATUS_SPEED_1000 0x00000080 /* Speed 1000Mb/s */ +#define E1000_STATUS_LAN_INIT_DONE 0x00000200 /* Lan Init Completion + by EEPROM/Flash */ +#define E1000_STATUS_ASDV 0x00000300 /* Auto speed detect value */ +#define E1000_STATUS_DOCK_CI 0x00000800 /* Change in Dock/Undock state. Clear on write '0'. */ +#define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Status of Master requests. */ +#define E1000_STATUS_MTXCKOK 0x00000400 /* MTX clock running OK */ +#define E1000_STATUS_PCI66 0x00000800 /* In 66Mhz slot */ +#define E1000_STATUS_BUS64 0x00001000 /* In 64 bit slot */ +#define E1000_STATUS_PCIX_MODE 0x00002000 /* PCI-X mode */ +#define E1000_STATUS_PCIX_SPEED 0x0000C000 /* PCI-X bus speed */ +#define E1000_STATUS_BMC_SKU_0 0x00100000 /* BMC USB redirect disabled */ +#define E1000_STATUS_BMC_SKU_1 0x00200000 /* BMC SRAM disabled */ +#define E1000_STATUS_BMC_SKU_2 0x00400000 /* BMC SDRAM disabled */ +#define E1000_STATUS_BMC_CRYPTO 0x00800000 /* BMC crypto disabled */ +#define E1000_STATUS_BMC_LITE 0x01000000 /* BMC external code execution disabled */ +#define E1000_STATUS_RGMII_ENABLE 0x02000000 /* RGMII disabled */ #define E1000_STATUS_FUSE_8 0x04000000 #define E1000_STATUS_FUSE_9 0x08000000 -#define E1000_STATUS_SERDES0_DIS 0x10000000 /* SERDES disabled on port 0 */ -#define E1000_STATUS_SERDES1_DIS 0x20000000 /* SERDES disabled on port 1 */ +#define E1000_STATUS_SERDES0_DIS 0x10000000 /* SERDES disabled on port 0 */ +#define E1000_STATUS_SERDES1_DIS 0x20000000 /* SERDES disabled on port 1 */ -/* Constants used to intrepret the masked PCI-X bus speed. */ -#define E1000_STATUS_PCIX_SPEED_66 0x00000000 /* PCI-X bus speed 50-66 MHz */ -#define E1000_STATUS_PCIX_SPEED_100 0x00004000 /* PCI-X bus speed 66-100 MHz */ -#define E1000_STATUS_PCIX_SPEED_133 0x00008000 /* PCI-X bus speed 100-133 MHz */ +/* Constants used to interpret the masked PCI-X bus speed. */ +#define E1000_STATUS_PCIX_SPEED_66 0x00000000 /* PCI-X bus speed 50-66 MHz */ +#define E1000_STATUS_PCIX_SPEED_100 0x00004000 /* PCI-X bus speed 66-100 MHz */ +#define E1000_STATUS_PCIX_SPEED_133 0x00008000 /* PCI-X bus speed 100-133 MHz */ /* EEPROM/Flash Control */ -#define E1000_EECD_SK 0x00000001 /* EEPROM Clock */ -#define E1000_EECD_CS 0x00000002 /* EEPROM Chip Select */ -#define E1000_EECD_DI 0x00000004 /* EEPROM Data In */ -#define E1000_EECD_DO 0x00000008 /* EEPROM Data Out */ +#define E1000_EECD_SK 0x00000001 /* EEPROM Clock */ +#define E1000_EECD_CS 0x00000002 /* EEPROM Chip Select */ +#define E1000_EECD_DI 0x00000004 /* EEPROM Data In */ +#define E1000_EECD_DO 0x00000008 /* EEPROM Data Out */ #define E1000_EECD_FWE_MASK 0x00000030 -#define E1000_EECD_FWE_DIS 0x00000010 /* Disable FLASH writes */ -#define E1000_EECD_FWE_EN 0x00000020 /* Enable FLASH writes */ +#define E1000_EECD_FWE_DIS 0x00000010 /* Disable FLASH writes */ +#define E1000_EECD_FWE_EN 0x00000020 /* Enable FLASH writes */ #define E1000_EECD_FWE_SHIFT 4 -#define E1000_EECD_REQ 0x00000040 /* EEPROM Access Request */ -#define E1000_EECD_GNT 0x00000080 /* EEPROM Access Grant */ -#define E1000_EECD_PRES 0x00000100 /* EEPROM Present */ -#define E1000_EECD_SIZE 0x00000200 /* EEPROM Size (0=64 word 1=256 word) */ -#define E1000_EECD_ADDR_BITS 0x00000400 /* EEPROM Addressing bits based on type - * (0-small, 1-large) */ -#define E1000_EECD_TYPE 0x00002000 /* EEPROM Type (1-SPI, 0-Microwire) */ +#define E1000_EECD_REQ 0x00000040 /* EEPROM Access Request */ +#define E1000_EECD_GNT 0x00000080 /* EEPROM Access Grant */ +#define E1000_EECD_PRES 0x00000100 /* EEPROM Present */ +#define E1000_EECD_SIZE 0x00000200 /* EEPROM Size (0=64 word 1=256 word) */ +#define E1000_EECD_ADDR_BITS 0x00000400 /* EEPROM Addressing bits based on type + * (0-small, 1-large) */ +#define E1000_EECD_TYPE 0x00002000 /* EEPROM Type (1-SPI, 0-Microwire) */ #ifndef E1000_EEPROM_GRANT_ATTEMPTS -#define E1000_EEPROM_GRANT_ATTEMPTS 1000 /* EEPROM # attempts to gain grant */ +#define E1000_EEPROM_GRANT_ATTEMPTS 1000 /* EEPROM # attempts to gain grant */ #endif -#define E1000_EECD_AUTO_RD 0x00000200 /* EEPROM Auto Read done */ -#define E1000_EECD_SIZE_EX_MASK 0x00007800 /* EEprom Size */ +#define E1000_EECD_AUTO_RD 0x00000200 /* EEPROM Auto Read done */ +#define E1000_EECD_SIZE_EX_MASK 0x00007800 /* EEprom Size */ #define E1000_EECD_SIZE_EX_SHIFT 11 -#define E1000_EECD_NVADDS 0x00018000 /* NVM Address Size */ -#define E1000_EECD_SELSHAD 0x00020000 /* Select Shadow RAM */ -#define E1000_EECD_INITSRAM 0x00040000 /* Initialize Shadow RAM */ -#define E1000_EECD_FLUPD 0x00080000 /* Update FLASH */ -#define E1000_EECD_AUPDEN 0x00100000 /* Enable Autonomous FLASH update */ -#define E1000_EECD_SHADV 0x00200000 /* Shadow RAM Data Valid */ -#define E1000_EECD_SEC1VAL 0x00400000 /* Sector One Valid */ +#define E1000_EECD_NVADDS 0x00018000 /* NVM Address Size */ +#define E1000_EECD_SELSHAD 0x00020000 /* Select Shadow RAM */ +#define E1000_EECD_INITSRAM 0x00040000 /* Initialize Shadow RAM */ +#define E1000_EECD_FLUPD 0x00080000 /* Update FLASH */ +#define E1000_EECD_AUPDEN 0x00100000 /* Enable Autonomous FLASH update */ +#define E1000_EECD_SHADV 0x00200000 /* Shadow RAM Data Valid */ +#define E1000_EECD_SEC1VAL 0x00400000 /* Sector One Valid */ #define E1000_EECD_SECVAL_SHIFT 22 #define E1000_STM_OPCODE 0xDB00 #define E1000_HICR_FW_RESET 0xC0 @@ -1593,12 +1506,12 @@ struct e1000_hw { #define E1000_ICH_NVM_SIG_MASK 0xC0 /* EEPROM Read */ -#define E1000_EERD_START 0x00000001 /* Start Read */ -#define E1000_EERD_DONE 0x00000010 /* Read Done */ +#define E1000_EERD_START 0x00000001 /* Start Read */ +#define E1000_EERD_DONE 0x00000010 /* Read Done */ #define E1000_EERD_ADDR_SHIFT 8 -#define E1000_EERD_ADDR_MASK 0x0000FF00 /* Read Address */ +#define E1000_EERD_ADDR_MASK 0x0000FF00 /* Read Address */ #define E1000_EERD_DATA_SHIFT 16 -#define E1000_EERD_DATA_MASK 0xFFFF0000 /* Read Data */ +#define E1000_EERD_DATA_MASK 0xFFFF0000 /* Read Data */ /* SPI EEPROM Status Register */ #define EEPROM_STATUS_RDY_SPI 0x01 @@ -1608,25 +1521,25 @@ struct e1000_hw { #define EEPROM_STATUS_WPEN_SPI 0x80 /* Extended Device Control */ -#define E1000_CTRL_EXT_GPI0_EN 0x00000001 /* Maps SDP4 to GPI0 */ -#define E1000_CTRL_EXT_GPI1_EN 0x00000002 /* Maps SDP5 to GPI1 */ +#define E1000_CTRL_EXT_GPI0_EN 0x00000001 /* Maps SDP4 to GPI0 */ +#define E1000_CTRL_EXT_GPI1_EN 0x00000002 /* Maps SDP5 to GPI1 */ #define E1000_CTRL_EXT_PHYINT_EN E1000_CTRL_EXT_GPI1_EN -#define E1000_CTRL_EXT_GPI2_EN 0x00000004 /* Maps SDP6 to GPI2 */ -#define E1000_CTRL_EXT_GPI3_EN 0x00000008 /* Maps SDP7 to GPI3 */ -#define E1000_CTRL_EXT_SDP4_DATA 0x00000010 /* Value of SW Defineable Pin 4 */ -#define E1000_CTRL_EXT_SDP5_DATA 0x00000020 /* Value of SW Defineable Pin 5 */ +#define E1000_CTRL_EXT_GPI2_EN 0x00000004 /* Maps SDP6 to GPI2 */ +#define E1000_CTRL_EXT_GPI3_EN 0x00000008 /* Maps SDP7 to GPI3 */ +#define E1000_CTRL_EXT_SDP4_DATA 0x00000010 /* Value of SW Defineable Pin 4 */ +#define E1000_CTRL_EXT_SDP5_DATA 0x00000020 /* Value of SW Defineable Pin 5 */ #define E1000_CTRL_EXT_PHY_INT E1000_CTRL_EXT_SDP5_DATA -#define E1000_CTRL_EXT_SDP6_DATA 0x00000040 /* Value of SW Defineable Pin 6 */ -#define E1000_CTRL_EXT_SDP7_DATA 0x00000080 /* Value of SW Defineable Pin 7 */ -#define E1000_CTRL_EXT_SDP4_DIR 0x00000100 /* Direction of SDP4 0=in 1=out */ -#define E1000_CTRL_EXT_SDP5_DIR 0x00000200 /* Direction of SDP5 0=in 1=out */ -#define E1000_CTRL_EXT_SDP6_DIR 0x00000400 /* Direction of SDP6 0=in 1=out */ -#define E1000_CTRL_EXT_SDP7_DIR 0x00000800 /* Direction of SDP7 0=in 1=out */ -#define E1000_CTRL_EXT_ASDCHK 0x00001000 /* Initiate an ASD sequence */ -#define E1000_CTRL_EXT_EE_RST 0x00002000 /* Reinitialize from EEPROM */ -#define E1000_CTRL_EXT_IPS 0x00004000 /* Invert Power State */ -#define E1000_CTRL_EXT_SPD_BYPS 0x00008000 /* Speed Select Bypass */ -#define E1000_CTRL_EXT_RO_DIS 0x00020000 /* Relaxed Ordering disable */ +#define E1000_CTRL_EXT_SDP6_DATA 0x00000040 /* Value of SW Defineable Pin 6 */ +#define E1000_CTRL_EXT_SDP7_DATA 0x00000080 /* Value of SW Defineable Pin 7 */ +#define E1000_CTRL_EXT_SDP4_DIR 0x00000100 /* Direction of SDP4 0=in 1=out */ +#define E1000_CTRL_EXT_SDP5_DIR 0x00000200 /* Direction of SDP5 0=in 1=out */ +#define E1000_CTRL_EXT_SDP6_DIR 0x00000400 /* Direction of SDP6 0=in 1=out */ +#define E1000_CTRL_EXT_SDP7_DIR 0x00000800 /* Direction of SDP7 0=in 1=out */ +#define E1000_CTRL_EXT_ASDCHK 0x00001000 /* Initiate an ASD sequence */ +#define E1000_CTRL_EXT_EE_RST 0x00002000 /* Reinitialize from EEPROM */ +#define E1000_CTRL_EXT_IPS 0x00004000 /* Invert Power State */ +#define E1000_CTRL_EXT_SPD_BYPS 0x00008000 /* Speed Select Bypass */ +#define E1000_CTRL_EXT_RO_DIS 0x00020000 /* Relaxed Ordering disable */ #define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000 #define E1000_CTRL_EXT_LINK_MODE_GMII 0x00000000 #define E1000_CTRL_EXT_LINK_MODE_TBI 0x00C00000 @@ -1638,11 +1551,11 @@ struct e1000_hw { #define E1000_CTRL_EXT_WR_WMARK_320 0x01000000 #define E1000_CTRL_EXT_WR_WMARK_384 0x02000000 #define E1000_CTRL_EXT_WR_WMARK_448 0x03000000 -#define E1000_CTRL_EXT_DRV_LOAD 0x10000000 /* Driver loaded bit for FW */ -#define E1000_CTRL_EXT_IAME 0x08000000 /* Interrupt acknowledge Auto-mask */ -#define E1000_CTRL_EXT_INT_TIMER_CLR 0x20000000 /* Clear Interrupt timers after IMS clear */ -#define E1000_CRTL_EXT_PB_PAREN 0x01000000 /* packet buffer parity error detection enabled */ -#define E1000_CTRL_EXT_DF_PAREN 0x02000000 /* descriptor FIFO parity error detection enable */ +#define E1000_CTRL_EXT_DRV_LOAD 0x10000000 /* Driver loaded bit for FW */ +#define E1000_CTRL_EXT_IAME 0x08000000 /* Interrupt acknowledge Auto-mask */ +#define E1000_CTRL_EXT_INT_TIMER_CLR 0x20000000 /* Clear Interrupt timers after IMS clear */ +#define E1000_CRTL_EXT_PB_PAREN 0x01000000 /* packet buffer parity error detection enabled */ +#define E1000_CTRL_EXT_DF_PAREN 0x02000000 /* descriptor FIFO parity error detection enable */ #define E1000_CTRL_EXT_GHOST_PAREN 0x40000000 /* MDI Control */ @@ -1742,167 +1655,167 @@ struct e1000_hw { #define E1000_LEDCTL_MODE_LED_OFF 0xF /* Receive Address */ -#define E1000_RAH_AV 0x80000000 /* Receive descriptor valid */ +#define E1000_RAH_AV 0x80000000 /* Receive descriptor valid */ /* Interrupt Cause Read */ -#define E1000_ICR_TXDW 0x00000001 /* Transmit desc written back */ -#define E1000_ICR_TXQE 0x00000002 /* Transmit Queue empty */ -#define E1000_ICR_LSC 0x00000004 /* Link Status Change */ -#define E1000_ICR_RXSEQ 0x00000008 /* rx sequence error */ -#define E1000_ICR_RXDMT0 0x00000010 /* rx desc min. threshold (0) */ -#define E1000_ICR_RXO 0x00000040 /* rx overrun */ -#define E1000_ICR_RXT0 0x00000080 /* rx timer intr (ring 0) */ -#define E1000_ICR_MDAC 0x00000200 /* MDIO access complete */ -#define E1000_ICR_RXCFG 0x00000400 /* RX /c/ ordered set */ -#define E1000_ICR_GPI_EN0 0x00000800 /* GP Int 0 */ -#define E1000_ICR_GPI_EN1 0x00001000 /* GP Int 1 */ -#define E1000_ICR_GPI_EN2 0x00002000 /* GP Int 2 */ -#define E1000_ICR_GPI_EN3 0x00004000 /* GP Int 3 */ +#define E1000_ICR_TXDW 0x00000001 /* Transmit desc written back */ +#define E1000_ICR_TXQE 0x00000002 /* Transmit Queue empty */ +#define E1000_ICR_LSC 0x00000004 /* Link Status Change */ +#define E1000_ICR_RXSEQ 0x00000008 /* rx sequence error */ +#define E1000_ICR_RXDMT0 0x00000010 /* rx desc min. threshold (0) */ +#define E1000_ICR_RXO 0x00000040 /* rx overrun */ +#define E1000_ICR_RXT0 0x00000080 /* rx timer intr (ring 0) */ +#define E1000_ICR_MDAC 0x00000200 /* MDIO access complete */ +#define E1000_ICR_RXCFG 0x00000400 /* RX /c/ ordered set */ +#define E1000_ICR_GPI_EN0 0x00000800 /* GP Int 0 */ +#define E1000_ICR_GPI_EN1 0x00001000 /* GP Int 1 */ +#define E1000_ICR_GPI_EN2 0x00002000 /* GP Int 2 */ +#define E1000_ICR_GPI_EN3 0x00004000 /* GP Int 3 */ #define E1000_ICR_TXD_LOW 0x00008000 #define E1000_ICR_SRPD 0x00010000 -#define E1000_ICR_ACK 0x00020000 /* Receive Ack frame */ -#define E1000_ICR_MNG 0x00040000 /* Manageability event */ -#define E1000_ICR_DOCK 0x00080000 /* Dock/Undock */ -#define E1000_ICR_INT_ASSERTED 0x80000000 /* If this bit asserted, the driver should claim the interrupt */ -#define E1000_ICR_RXD_FIFO_PAR0 0x00100000 /* queue 0 Rx descriptor FIFO parity error */ -#define E1000_ICR_TXD_FIFO_PAR0 0x00200000 /* queue 0 Tx descriptor FIFO parity error */ -#define E1000_ICR_HOST_ARB_PAR 0x00400000 /* host arb read buffer parity error */ -#define E1000_ICR_PB_PAR 0x00800000 /* packet buffer parity error */ -#define E1000_ICR_RXD_FIFO_PAR1 0x01000000 /* queue 1 Rx descriptor FIFO parity error */ -#define E1000_ICR_TXD_FIFO_PAR1 0x02000000 /* queue 1 Tx descriptor FIFO parity error */ -#define E1000_ICR_ALL_PARITY 0x03F00000 /* all parity error bits */ -#define E1000_ICR_DSW 0x00000020 /* FW changed the status of DISSW bit in the FWSM */ -#define E1000_ICR_PHYINT 0x00001000 /* LAN connected device generates an interrupt */ -#define E1000_ICR_EPRST 0x00100000 /* ME handware reset occurs */ +#define E1000_ICR_ACK 0x00020000 /* Receive Ack frame */ +#define E1000_ICR_MNG 0x00040000 /* Manageability event */ +#define E1000_ICR_DOCK 0x00080000 /* Dock/Undock */ +#define E1000_ICR_INT_ASSERTED 0x80000000 /* If this bit asserted, the driver should claim the interrupt */ +#define E1000_ICR_RXD_FIFO_PAR0 0x00100000 /* queue 0 Rx descriptor FIFO parity error */ +#define E1000_ICR_TXD_FIFO_PAR0 0x00200000 /* queue 0 Tx descriptor FIFO parity error */ +#define E1000_ICR_HOST_ARB_PAR 0x00400000 /* host arb read buffer parity error */ +#define E1000_ICR_PB_PAR 0x00800000 /* packet buffer parity error */ +#define E1000_ICR_RXD_FIFO_PAR1 0x01000000 /* queue 1 Rx descriptor FIFO parity error */ +#define E1000_ICR_TXD_FIFO_PAR1 0x02000000 /* queue 1 Tx descriptor FIFO parity error */ +#define E1000_ICR_ALL_PARITY 0x03F00000 /* all parity error bits */ +#define E1000_ICR_DSW 0x00000020 /* FW changed the status of DISSW bit in the FWSM */ +#define E1000_ICR_PHYINT 0x00001000 /* LAN connected device generates an interrupt */ +#define E1000_ICR_EPRST 0x00100000 /* ME hardware reset occurs */ /* Interrupt Cause Set */ -#define E1000_ICS_TXDW E1000_ICR_TXDW /* Transmit desc written back */ -#define E1000_ICS_TXQE E1000_ICR_TXQE /* Transmit Queue empty */ -#define E1000_ICS_LSC E1000_ICR_LSC /* Link Status Change */ -#define E1000_ICS_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */ -#define E1000_ICS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */ -#define E1000_ICS_RXO E1000_ICR_RXO /* rx overrun */ -#define E1000_ICS_RXT0 E1000_ICR_RXT0 /* rx timer intr */ -#define E1000_ICS_MDAC E1000_ICR_MDAC /* MDIO access complete */ -#define E1000_ICS_RXCFG E1000_ICR_RXCFG /* RX /c/ ordered set */ -#define E1000_ICS_GPI_EN0 E1000_ICR_GPI_EN0 /* GP Int 0 */ -#define E1000_ICS_GPI_EN1 E1000_ICR_GPI_EN1 /* GP Int 1 */ -#define E1000_ICS_GPI_EN2 E1000_ICR_GPI_EN2 /* GP Int 2 */ -#define E1000_ICS_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */ +#define E1000_ICS_TXDW E1000_ICR_TXDW /* Transmit desc written back */ +#define E1000_ICS_TXQE E1000_ICR_TXQE /* Transmit Queue empty */ +#define E1000_ICS_LSC E1000_ICR_LSC /* Link Status Change */ +#define E1000_ICS_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */ +#define E1000_ICS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */ +#define E1000_ICS_RXO E1000_ICR_RXO /* rx overrun */ +#define E1000_ICS_RXT0 E1000_ICR_RXT0 /* rx timer intr */ +#define E1000_ICS_MDAC E1000_ICR_MDAC /* MDIO access complete */ +#define E1000_ICS_RXCFG E1000_ICR_RXCFG /* RX /c/ ordered set */ +#define E1000_ICS_GPI_EN0 E1000_ICR_GPI_EN0 /* GP Int 0 */ +#define E1000_ICS_GPI_EN1 E1000_ICR_GPI_EN1 /* GP Int 1 */ +#define E1000_ICS_GPI_EN2 E1000_ICR_GPI_EN2 /* GP Int 2 */ +#define E1000_ICS_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */ #define E1000_ICS_TXD_LOW E1000_ICR_TXD_LOW #define E1000_ICS_SRPD E1000_ICR_SRPD -#define E1000_ICS_ACK E1000_ICR_ACK /* Receive Ack frame */ -#define E1000_ICS_MNG E1000_ICR_MNG /* Manageability event */ -#define E1000_ICS_DOCK E1000_ICR_DOCK /* Dock/Undock */ -#define E1000_ICS_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0 /* queue 0 Rx descriptor FIFO parity error */ -#define E1000_ICS_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0 /* queue 0 Tx descriptor FIFO parity error */ -#define E1000_ICS_HOST_ARB_PAR E1000_ICR_HOST_ARB_PAR /* host arb read buffer parity error */ -#define E1000_ICS_PB_PAR E1000_ICR_PB_PAR /* packet buffer parity error */ -#define E1000_ICS_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */ -#define E1000_ICS_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */ +#define E1000_ICS_ACK E1000_ICR_ACK /* Receive Ack frame */ +#define E1000_ICS_MNG E1000_ICR_MNG /* Manageability event */ +#define E1000_ICS_DOCK E1000_ICR_DOCK /* Dock/Undock */ +#define E1000_ICS_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0 /* queue 0 Rx descriptor FIFO parity error */ +#define E1000_ICS_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0 /* queue 0 Tx descriptor FIFO parity error */ +#define E1000_ICS_HOST_ARB_PAR E1000_ICR_HOST_ARB_PAR /* host arb read buffer parity error */ +#define E1000_ICS_PB_PAR E1000_ICR_PB_PAR /* packet buffer parity error */ +#define E1000_ICS_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */ +#define E1000_ICS_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */ #define E1000_ICS_DSW E1000_ICR_DSW #define E1000_ICS_PHYINT E1000_ICR_PHYINT #define E1000_ICS_EPRST E1000_ICR_EPRST /* Interrupt Mask Set */ -#define E1000_IMS_TXDW E1000_ICR_TXDW /* Transmit desc written back */ -#define E1000_IMS_TXQE E1000_ICR_TXQE /* Transmit Queue empty */ -#define E1000_IMS_LSC E1000_ICR_LSC /* Link Status Change */ -#define E1000_IMS_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */ -#define E1000_IMS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */ -#define E1000_IMS_RXO E1000_ICR_RXO /* rx overrun */ -#define E1000_IMS_RXT0 E1000_ICR_RXT0 /* rx timer intr */ -#define E1000_IMS_MDAC E1000_ICR_MDAC /* MDIO access complete */ -#define E1000_IMS_RXCFG E1000_ICR_RXCFG /* RX /c/ ordered set */ -#define E1000_IMS_GPI_EN0 E1000_ICR_GPI_EN0 /* GP Int 0 */ -#define E1000_IMS_GPI_EN1 E1000_ICR_GPI_EN1 /* GP Int 1 */ -#define E1000_IMS_GPI_EN2 E1000_ICR_GPI_EN2 /* GP Int 2 */ -#define E1000_IMS_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */ +#define E1000_IMS_TXDW E1000_ICR_TXDW /* Transmit desc written back */ +#define E1000_IMS_TXQE E1000_ICR_TXQE /* Transmit Queue empty */ +#define E1000_IMS_LSC E1000_ICR_LSC /* Link Status Change */ +#define E1000_IMS_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */ +#define E1000_IMS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */ +#define E1000_IMS_RXO E1000_ICR_RXO /* rx overrun */ +#define E1000_IMS_RXT0 E1000_ICR_RXT0 /* rx timer intr */ +#define E1000_IMS_MDAC E1000_ICR_MDAC /* MDIO access complete */ +#define E1000_IMS_RXCFG E1000_ICR_RXCFG /* RX /c/ ordered set */ +#define E1000_IMS_GPI_EN0 E1000_ICR_GPI_EN0 /* GP Int 0 */ +#define E1000_IMS_GPI_EN1 E1000_ICR_GPI_EN1 /* GP Int 1 */ +#define E1000_IMS_GPI_EN2 E1000_ICR_GPI_EN2 /* GP Int 2 */ +#define E1000_IMS_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */ #define E1000_IMS_TXD_LOW E1000_ICR_TXD_LOW #define E1000_IMS_SRPD E1000_ICR_SRPD -#define E1000_IMS_ACK E1000_ICR_ACK /* Receive Ack frame */ -#define E1000_IMS_MNG E1000_ICR_MNG /* Manageability event */ -#define E1000_IMS_DOCK E1000_ICR_DOCK /* Dock/Undock */ -#define E1000_IMS_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0 /* queue 0 Rx descriptor FIFO parity error */ -#define E1000_IMS_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0 /* queue 0 Tx descriptor FIFO parity error */ -#define E1000_IMS_HOST_ARB_PAR E1000_ICR_HOST_ARB_PAR /* host arb read buffer parity error */ -#define E1000_IMS_PB_PAR E1000_ICR_PB_PAR /* packet buffer parity error */ -#define E1000_IMS_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */ -#define E1000_IMS_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */ +#define E1000_IMS_ACK E1000_ICR_ACK /* Receive Ack frame */ +#define E1000_IMS_MNG E1000_ICR_MNG /* Manageability event */ +#define E1000_IMS_DOCK E1000_ICR_DOCK /* Dock/Undock */ +#define E1000_IMS_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0 /* queue 0 Rx descriptor FIFO parity error */ +#define E1000_IMS_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0 /* queue 0 Tx descriptor FIFO parity error */ +#define E1000_IMS_HOST_ARB_PAR E1000_ICR_HOST_ARB_PAR /* host arb read buffer parity error */ +#define E1000_IMS_PB_PAR E1000_ICR_PB_PAR /* packet buffer parity error */ +#define E1000_IMS_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */ +#define E1000_IMS_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */ #define E1000_IMS_DSW E1000_ICR_DSW #define E1000_IMS_PHYINT E1000_ICR_PHYINT #define E1000_IMS_EPRST E1000_ICR_EPRST /* Interrupt Mask Clear */ -#define E1000_IMC_TXDW E1000_ICR_TXDW /* Transmit desc written back */ -#define E1000_IMC_TXQE E1000_ICR_TXQE /* Transmit Queue empty */ -#define E1000_IMC_LSC E1000_ICR_LSC /* Link Status Change */ -#define E1000_IMC_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */ -#define E1000_IMC_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */ -#define E1000_IMC_RXO E1000_ICR_RXO /* rx overrun */ -#define E1000_IMC_RXT0 E1000_ICR_RXT0 /* rx timer intr */ -#define E1000_IMC_MDAC E1000_ICR_MDAC /* MDIO access complete */ -#define E1000_IMC_RXCFG E1000_ICR_RXCFG /* RX /c/ ordered set */ -#define E1000_IMC_GPI_EN0 E1000_ICR_GPI_EN0 /* GP Int 0 */ -#define E1000_IMC_GPI_EN1 E1000_ICR_GPI_EN1 /* GP Int 1 */ -#define E1000_IMC_GPI_EN2 E1000_ICR_GPI_EN2 /* GP Int 2 */ -#define E1000_IMC_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */ +#define E1000_IMC_TXDW E1000_ICR_TXDW /* Transmit desc written back */ +#define E1000_IMC_TXQE E1000_ICR_TXQE /* Transmit Queue empty */ +#define E1000_IMC_LSC E1000_ICR_LSC /* Link Status Change */ +#define E1000_IMC_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */ +#define E1000_IMC_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */ +#define E1000_IMC_RXO E1000_ICR_RXO /* rx overrun */ +#define E1000_IMC_RXT0 E1000_ICR_RXT0 /* rx timer intr */ +#define E1000_IMC_MDAC E1000_ICR_MDAC /* MDIO access complete */ +#define E1000_IMC_RXCFG E1000_ICR_RXCFG /* RX /c/ ordered set */ +#define E1000_IMC_GPI_EN0 E1000_ICR_GPI_EN0 /* GP Int 0 */ +#define E1000_IMC_GPI_EN1 E1000_ICR_GPI_EN1 /* GP Int 1 */ +#define E1000_IMC_GPI_EN2 E1000_ICR_GPI_EN2 /* GP Int 2 */ +#define E1000_IMC_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */ #define E1000_IMC_TXD_LOW E1000_ICR_TXD_LOW #define E1000_IMC_SRPD E1000_ICR_SRPD -#define E1000_IMC_ACK E1000_ICR_ACK /* Receive Ack frame */ -#define E1000_IMC_MNG E1000_ICR_MNG /* Manageability event */ -#define E1000_IMC_DOCK E1000_ICR_DOCK /* Dock/Undock */ -#define E1000_IMC_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0 /* queue 0 Rx descriptor FIFO parity error */ -#define E1000_IMC_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0 /* queue 0 Tx descriptor FIFO parity error */ -#define E1000_IMC_HOST_ARB_PAR E1000_ICR_HOST_ARB_PAR /* host arb read buffer parity error */ -#define E1000_IMC_PB_PAR E1000_ICR_PB_PAR /* packet buffer parity error */ -#define E1000_IMC_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */ -#define E1000_IMC_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */ +#define E1000_IMC_ACK E1000_ICR_ACK /* Receive Ack frame */ +#define E1000_IMC_MNG E1000_ICR_MNG /* Manageability event */ +#define E1000_IMC_DOCK E1000_ICR_DOCK /* Dock/Undock */ +#define E1000_IMC_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0 /* queue 0 Rx descriptor FIFO parity error */ +#define E1000_IMC_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0 /* queue 0 Tx descriptor FIFO parity error */ +#define E1000_IMC_HOST_ARB_PAR E1000_ICR_HOST_ARB_PAR /* host arb read buffer parity error */ +#define E1000_IMC_PB_PAR E1000_ICR_PB_PAR /* packet buffer parity error */ +#define E1000_IMC_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */ +#define E1000_IMC_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */ #define E1000_IMC_DSW E1000_ICR_DSW #define E1000_IMC_PHYINT E1000_ICR_PHYINT #define E1000_IMC_EPRST E1000_ICR_EPRST /* Receive Control */ -#define E1000_RCTL_RST 0x00000001 /* Software reset */ -#define E1000_RCTL_EN 0x00000002 /* enable */ -#define E1000_RCTL_SBP 0x00000004 /* store bad packet */ -#define E1000_RCTL_UPE 0x00000008 /* unicast promiscuous enable */ -#define E1000_RCTL_MPE 0x00000010 /* multicast promiscuous enab */ -#define E1000_RCTL_LPE 0x00000020 /* long packet enable */ -#define E1000_RCTL_LBM_NO 0x00000000 /* no loopback mode */ -#define E1000_RCTL_LBM_MAC 0x00000040 /* MAC loopback mode */ -#define E1000_RCTL_LBM_SLP 0x00000080 /* serial link loopback mode */ -#define E1000_RCTL_LBM_TCVR 0x000000C0 /* tcvr loopback mode */ -#define E1000_RCTL_DTYP_MASK 0x00000C00 /* Descriptor type mask */ -#define E1000_RCTL_DTYP_PS 0x00000400 /* Packet Split descriptor */ -#define E1000_RCTL_RDMTS_HALF 0x00000000 /* rx desc min threshold size */ -#define E1000_RCTL_RDMTS_QUAT 0x00000100 /* rx desc min threshold size */ -#define E1000_RCTL_RDMTS_EIGTH 0x00000200 /* rx desc min threshold size */ -#define E1000_RCTL_MO_SHIFT 12 /* multicast offset shift */ -#define E1000_RCTL_MO_0 0x00000000 /* multicast offset 11:0 */ -#define E1000_RCTL_MO_1 0x00001000 /* multicast offset 12:1 */ -#define E1000_RCTL_MO_2 0x00002000 /* multicast offset 13:2 */ -#define E1000_RCTL_MO_3 0x00003000 /* multicast offset 15:4 */ -#define E1000_RCTL_MDR 0x00004000 /* multicast desc ring 0 */ -#define E1000_RCTL_BAM 0x00008000 /* broadcast enable */ +#define E1000_RCTL_RST 0x00000001 /* Software reset */ +#define E1000_RCTL_EN 0x00000002 /* enable */ +#define E1000_RCTL_SBP 0x00000004 /* store bad packet */ +#define E1000_RCTL_UPE 0x00000008 /* unicast promiscuous enable */ +#define E1000_RCTL_MPE 0x00000010 /* multicast promiscuous enab */ +#define E1000_RCTL_LPE 0x00000020 /* long packet enable */ +#define E1000_RCTL_LBM_NO 0x00000000 /* no loopback mode */ +#define E1000_RCTL_LBM_MAC 0x00000040 /* MAC loopback mode */ +#define E1000_RCTL_LBM_SLP 0x00000080 /* serial link loopback mode */ +#define E1000_RCTL_LBM_TCVR 0x000000C0 /* tcvr loopback mode */ +#define E1000_RCTL_DTYP_MASK 0x00000C00 /* Descriptor type mask */ +#define E1000_RCTL_DTYP_PS 0x00000400 /* Packet Split descriptor */ +#define E1000_RCTL_RDMTS_HALF 0x00000000 /* rx desc min threshold size */ +#define E1000_RCTL_RDMTS_QUAT 0x00000100 /* rx desc min threshold size */ +#define E1000_RCTL_RDMTS_EIGTH 0x00000200 /* rx desc min threshold size */ +#define E1000_RCTL_MO_SHIFT 12 /* multicast offset shift */ +#define E1000_RCTL_MO_0 0x00000000 /* multicast offset 11:0 */ +#define E1000_RCTL_MO_1 0x00001000 /* multicast offset 12:1 */ +#define E1000_RCTL_MO_2 0x00002000 /* multicast offset 13:2 */ +#define E1000_RCTL_MO_3 0x00003000 /* multicast offset 15:4 */ +#define E1000_RCTL_MDR 0x00004000 /* multicast desc ring 0 */ +#define E1000_RCTL_BAM 0x00008000 /* broadcast enable */ /* these buffer sizes are valid if E1000_RCTL_BSEX is 0 */ -#define E1000_RCTL_SZ_2048 0x00000000 /* rx buffer size 2048 */ -#define E1000_RCTL_SZ_1024 0x00010000 /* rx buffer size 1024 */ -#define E1000_RCTL_SZ_512 0x00020000 /* rx buffer size 512 */ -#define E1000_RCTL_SZ_256 0x00030000 /* rx buffer size 256 */ +#define E1000_RCTL_SZ_2048 0x00000000 /* rx buffer size 2048 */ +#define E1000_RCTL_SZ_1024 0x00010000 /* rx buffer size 1024 */ +#define E1000_RCTL_SZ_512 0x00020000 /* rx buffer size 512 */ +#define E1000_RCTL_SZ_256 0x00030000 /* rx buffer size 256 */ /* these buffer sizes are valid if E1000_RCTL_BSEX is 1 */ -#define E1000_RCTL_SZ_16384 0x00010000 /* rx buffer size 16384 */ -#define E1000_RCTL_SZ_8192 0x00020000 /* rx buffer size 8192 */ -#define E1000_RCTL_SZ_4096 0x00030000 /* rx buffer size 4096 */ -#define E1000_RCTL_VFE 0x00040000 /* vlan filter enable */ -#define E1000_RCTL_CFIEN 0x00080000 /* canonical form enable */ -#define E1000_RCTL_CFI 0x00100000 /* canonical form indicator */ -#define E1000_RCTL_DPF 0x00400000 /* discard pause frames */ -#define E1000_RCTL_PMCF 0x00800000 /* pass MAC control frames */ -#define E1000_RCTL_BSEX 0x02000000 /* Buffer size extension */ -#define E1000_RCTL_SECRC 0x04000000 /* Strip Ethernet CRC */ -#define E1000_RCTL_FLXBUF_MASK 0x78000000 /* Flexible buffer size */ -#define E1000_RCTL_FLXBUF_SHIFT 27 /* Flexible buffer shift */ +#define E1000_RCTL_SZ_16384 0x00010000 /* rx buffer size 16384 */ +#define E1000_RCTL_SZ_8192 0x00020000 /* rx buffer size 8192 */ +#define E1000_RCTL_SZ_4096 0x00030000 /* rx buffer size 4096 */ +#define E1000_RCTL_VFE 0x00040000 /* vlan filter enable */ +#define E1000_RCTL_CFIEN 0x00080000 /* canonical form enable */ +#define E1000_RCTL_CFI 0x00100000 /* canonical form indicator */ +#define E1000_RCTL_DPF 0x00400000 /* discard pause frames */ +#define E1000_RCTL_PMCF 0x00800000 /* pass MAC control frames */ +#define E1000_RCTL_BSEX 0x02000000 /* Buffer size extension */ +#define E1000_RCTL_SECRC 0x04000000 /* Strip Ethernet CRC */ +#define E1000_RCTL_FLXBUF_MASK 0x78000000 /* Flexible buffer size */ +#define E1000_RCTL_FLXBUF_SHIFT 27 /* Flexible buffer shift */ /* Use byte values for the following shift parameters * Usage: @@ -1925,10 +1838,10 @@ struct e1000_hw { #define E1000_PSRCTL_BSIZE2_MASK 0x003F0000 #define E1000_PSRCTL_BSIZE3_MASK 0x3F000000 -#define E1000_PSRCTL_BSIZE0_SHIFT 7 /* Shift _right_ 7 */ -#define E1000_PSRCTL_BSIZE1_SHIFT 2 /* Shift _right_ 2 */ -#define E1000_PSRCTL_BSIZE2_SHIFT 6 /* Shift _left_ 6 */ -#define E1000_PSRCTL_BSIZE3_SHIFT 14 /* Shift _left_ 14 */ +#define E1000_PSRCTL_BSIZE0_SHIFT 7 /* Shift _right_ 7 */ +#define E1000_PSRCTL_BSIZE1_SHIFT 2 /* Shift _right_ 2 */ +#define E1000_PSRCTL_BSIZE2_SHIFT 6 /* Shift _left_ 6 */ +#define E1000_PSRCTL_BSIZE3_SHIFT 14 /* Shift _left_ 14 */ /* SW_W_SYNC definitions */ #define E1000_SWFW_EEP_SM 0x0001 @@ -1937,17 +1850,17 @@ struct e1000_hw { #define E1000_SWFW_MAC_CSR_SM 0x0008 /* Receive Descriptor */ -#define E1000_RDT_DELAY 0x0000ffff /* Delay timer (1=1024us) */ -#define E1000_RDT_FPDB 0x80000000 /* Flush descriptor block */ -#define E1000_RDLEN_LEN 0x0007ff80 /* descriptor length */ -#define E1000_RDH_RDH 0x0000ffff /* receive descriptor head */ -#define E1000_RDT_RDT 0x0000ffff /* receive descriptor tail */ +#define E1000_RDT_DELAY 0x0000ffff /* Delay timer (1=1024us) */ +#define E1000_RDT_FPDB 0x80000000 /* Flush descriptor block */ +#define E1000_RDLEN_LEN 0x0007ff80 /* descriptor length */ +#define E1000_RDH_RDH 0x0000ffff /* receive descriptor head */ +#define E1000_RDT_RDT 0x0000ffff /* receive descriptor tail */ /* Flow Control */ -#define E1000_FCRTH_RTH 0x0000FFF8 /* Mask Bits[15:3] for RTH */ -#define E1000_FCRTH_XFCE 0x80000000 /* External Flow Control Enable */ -#define E1000_FCRTL_RTL 0x0000FFF8 /* Mask Bits[15:3] for RTL */ -#define E1000_FCRTL_XONE 0x80000000 /* Enable XON frame transmission */ +#define E1000_FCRTH_RTH 0x0000FFF8 /* Mask Bits[15:3] for RTH */ +#define E1000_FCRTH_XFCE 0x80000000 /* External Flow Control Enable */ +#define E1000_FCRTL_RTL 0x0000FFF8 /* Mask Bits[15:3] for RTL */ +#define E1000_FCRTL_XONE 0x80000000 /* Enable XON frame transmission */ /* Header split receive */ #define E1000_RFCTL_ISCSI_DIS 0x00000001 @@ -1967,66 +1880,64 @@ struct e1000_hw { #define E1000_RFCTL_NEW_IPV6_EXT_DIS 0x00020000 /* Receive Descriptor Control */ -#define E1000_RXDCTL_PTHRESH 0x0000003F /* RXDCTL Prefetch Threshold */ -#define E1000_RXDCTL_HTHRESH 0x00003F00 /* RXDCTL Host Threshold */ -#define E1000_RXDCTL_WTHRESH 0x003F0000 /* RXDCTL Writeback Threshold */ -#define E1000_RXDCTL_GRAN 0x01000000 /* RXDCTL Granularity */ +#define E1000_RXDCTL_PTHRESH 0x0000003F /* RXDCTL Prefetch Threshold */ +#define E1000_RXDCTL_HTHRESH 0x00003F00 /* RXDCTL Host Threshold */ +#define E1000_RXDCTL_WTHRESH 0x003F0000 /* RXDCTL Writeback Threshold */ +#define E1000_RXDCTL_GRAN 0x01000000 /* RXDCTL Granularity */ /* Transmit Descriptor Control */ -#define E1000_TXDCTL_PTHRESH 0x0000003F /* TXDCTL Prefetch Threshold */ -#define E1000_TXDCTL_HTHRESH 0x00003F00 /* TXDCTL Host Threshold */ -#define E1000_TXDCTL_WTHRESH 0x003F0000 /* TXDCTL Writeback Threshold */ -#define E1000_TXDCTL_GRAN 0x01000000 /* TXDCTL Granularity */ -#define E1000_TXDCTL_LWTHRESH 0xFE000000 /* TXDCTL Low Threshold */ -#define E1000_TXDCTL_FULL_TX_DESC_WB 0x01010000 /* GRAN=1, WTHRESH=1 */ -#define E1000_TXDCTL_COUNT_DESC 0x00400000 /* Enable the counting of desc. - still to be processed. */ +#define E1000_TXDCTL_PTHRESH 0x0000003F /* TXDCTL Prefetch Threshold */ +#define E1000_TXDCTL_HTHRESH 0x00003F00 /* TXDCTL Host Threshold */ +#define E1000_TXDCTL_WTHRESH 0x003F0000 /* TXDCTL Writeback Threshold */ +#define E1000_TXDCTL_GRAN 0x01000000 /* TXDCTL Granularity */ +#define E1000_TXDCTL_LWTHRESH 0xFE000000 /* TXDCTL Low Threshold */ +#define E1000_TXDCTL_FULL_TX_DESC_WB 0x01010000 /* GRAN=1, WTHRESH=1 */ +#define E1000_TXDCTL_COUNT_DESC 0x00400000 /* Enable the counting of desc. + still to be processed. */ /* Transmit Configuration Word */ -#define E1000_TXCW_FD 0x00000020 /* TXCW full duplex */ -#define E1000_TXCW_HD 0x00000040 /* TXCW half duplex */ -#define E1000_TXCW_PAUSE 0x00000080 /* TXCW sym pause request */ -#define E1000_TXCW_ASM_DIR 0x00000100 /* TXCW astm pause direction */ -#define E1000_TXCW_PAUSE_MASK 0x00000180 /* TXCW pause request mask */ -#define E1000_TXCW_RF 0x00003000 /* TXCW remote fault */ -#define E1000_TXCW_NP 0x00008000 /* TXCW next page */ -#define E1000_TXCW_CW 0x0000ffff /* TxConfigWord mask */ -#define E1000_TXCW_TXC 0x40000000 /* Transmit Config control */ -#define E1000_TXCW_ANE 0x80000000 /* Auto-neg enable */ +#define E1000_TXCW_FD 0x00000020 /* TXCW full duplex */ +#define E1000_TXCW_HD 0x00000040 /* TXCW half duplex */ +#define E1000_TXCW_PAUSE 0x00000080 /* TXCW sym pause request */ +#define E1000_TXCW_ASM_DIR 0x00000100 /* TXCW astm pause direction */ +#define E1000_TXCW_PAUSE_MASK 0x00000180 /* TXCW pause request mask */ +#define E1000_TXCW_RF 0x00003000 /* TXCW remote fault */ +#define E1000_TXCW_NP 0x00008000 /* TXCW next page */ +#define E1000_TXCW_CW 0x0000ffff /* TxConfigWord mask */ +#define E1000_TXCW_TXC 0x40000000 /* Transmit Config control */ +#define E1000_TXCW_ANE 0x80000000 /* Auto-neg enable */ /* Receive Configuration Word */ -#define E1000_RXCW_CW 0x0000ffff /* RxConfigWord mask */ -#define E1000_RXCW_NC 0x04000000 /* Receive config no carrier */ -#define E1000_RXCW_IV 0x08000000 /* Receive config invalid */ -#define E1000_RXCW_CC 0x10000000 /* Receive config change */ -#define E1000_RXCW_C 0x20000000 /* Receive config */ -#define E1000_RXCW_SYNCH 0x40000000 /* Receive config synch */ -#define E1000_RXCW_ANC 0x80000000 /* Auto-neg complete */ +#define E1000_RXCW_CW 0x0000ffff /* RxConfigWord mask */ +#define E1000_RXCW_NC 0x04000000 /* Receive config no carrier */ +#define E1000_RXCW_IV 0x08000000 /* Receive config invalid */ +#define E1000_RXCW_CC 0x10000000 /* Receive config change */ +#define E1000_RXCW_C 0x20000000 /* Receive config */ +#define E1000_RXCW_SYNCH 0x40000000 /* Receive config synch */ +#define E1000_RXCW_ANC 0x80000000 /* Auto-neg complete */ /* Transmit Control */ -#define E1000_TCTL_RST 0x00000001 /* software reset */ -#define E1000_TCTL_EN 0x00000002 /* enable tx */ -#define E1000_TCTL_BCE 0x00000004 /* busy check enable */ -#define E1000_TCTL_PSP 0x00000008 /* pad short packets */ -#define E1000_TCTL_CT 0x00000ff0 /* collision threshold */ -#define E1000_TCTL_COLD 0x003ff000 /* collision distance */ -#define E1000_TCTL_SWXOFF 0x00400000 /* SW Xoff transmission */ -#define E1000_TCTL_PBE 0x00800000 /* Packet Burst Enable */ -#define E1000_TCTL_RTLC 0x01000000 /* Re-transmit on late collision */ -#define E1000_TCTL_NRTU 0x02000000 /* No Re-transmit on underrun */ -#define E1000_TCTL_MULR 0x10000000 /* Multiple request support */ +#define E1000_TCTL_RST 0x00000001 /* software reset */ +#define E1000_TCTL_EN 0x00000002 /* enable tx */ +#define E1000_TCTL_BCE 0x00000004 /* busy check enable */ +#define E1000_TCTL_PSP 0x00000008 /* pad short packets */ +#define E1000_TCTL_CT 0x00000ff0 /* collision threshold */ +#define E1000_TCTL_COLD 0x003ff000 /* collision distance */ +#define E1000_TCTL_SWXOFF 0x00400000 /* SW Xoff transmission */ +#define E1000_TCTL_PBE 0x00800000 /* Packet Burst Enable */ +#define E1000_TCTL_RTLC 0x01000000 /* Re-transmit on late collision */ +#define E1000_TCTL_NRTU 0x02000000 /* No Re-transmit on underrun */ +#define E1000_TCTL_MULR 0x10000000 /* Multiple request support */ /* Extended Transmit Control */ -#define E1000_TCTL_EXT_BST_MASK 0x000003FF /* Backoff Slot Time */ -#define E1000_TCTL_EXT_GCEX_MASK 0x000FFC00 /* Gigabit Carry Extend Padding */ - -#define DEFAULT_80003ES2LAN_TCTL_EXT_GCEX 0x00010000 +#define E1000_TCTL_EXT_BST_MASK 0x000003FF /* Backoff Slot Time */ +#define E1000_TCTL_EXT_GCEX_MASK 0x000FFC00 /* Gigabit Carry Extend Padding */ /* Receive Checksum Control */ -#define E1000_RXCSUM_PCSS_MASK 0x000000FF /* Packet Checksum Start */ -#define E1000_RXCSUM_IPOFL 0x00000100 /* IPv4 checksum offload */ -#define E1000_RXCSUM_TUOFL 0x00000200 /* TCP / UDP checksum offload */ -#define E1000_RXCSUM_IPV6OFL 0x00000400 /* IPv6 checksum offload */ -#define E1000_RXCSUM_IPPCSE 0x00001000 /* IP payload checksum enable */ -#define E1000_RXCSUM_PCSD 0x00002000 /* packet checksum disabled */ +#define E1000_RXCSUM_PCSS_MASK 0x000000FF /* Packet Checksum Start */ +#define E1000_RXCSUM_IPOFL 0x00000100 /* IPv4 checksum offload */ +#define E1000_RXCSUM_TUOFL 0x00000200 /* TCP / UDP checksum offload */ +#define E1000_RXCSUM_IPV6OFL 0x00000400 /* IPv6 checksum offload */ +#define E1000_RXCSUM_IPPCSE 0x00001000 /* IP payload checksum enable */ +#define E1000_RXCSUM_PCSD 0x00002000 /* packet checksum disabled */ /* Multiple Receive Queue Control */ #define E1000_MRQC_ENABLE_MASK 0x00000003 @@ -2042,141 +1953,141 @@ struct e1000_hw { /* Definitions for power management and wakeup registers */ /* Wake Up Control */ -#define E1000_WUC_APME 0x00000001 /* APM Enable */ -#define E1000_WUC_PME_EN 0x00000002 /* PME Enable */ -#define E1000_WUC_PME_STATUS 0x00000004 /* PME Status */ -#define E1000_WUC_APMPME 0x00000008 /* Assert PME on APM Wakeup */ -#define E1000_WUC_SPM 0x80000000 /* Enable SPM */ +#define E1000_WUC_APME 0x00000001 /* APM Enable */ +#define E1000_WUC_PME_EN 0x00000002 /* PME Enable */ +#define E1000_WUC_PME_STATUS 0x00000004 /* PME Status */ +#define E1000_WUC_APMPME 0x00000008 /* Assert PME on APM Wakeup */ +#define E1000_WUC_SPM 0x80000000 /* Enable SPM */ /* Wake Up Filter Control */ -#define E1000_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */ -#define E1000_WUFC_MAG 0x00000002 /* Magic Packet Wakeup Enable */ -#define E1000_WUFC_EX 0x00000004 /* Directed Exact Wakeup Enable */ -#define E1000_WUFC_MC 0x00000008 /* Directed Multicast Wakeup Enable */ -#define E1000_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */ -#define E1000_WUFC_ARP 0x00000020 /* ARP Request Packet Wakeup Enable */ -#define E1000_WUFC_IPV4 0x00000040 /* Directed IPv4 Packet Wakeup Enable */ -#define E1000_WUFC_IPV6 0x00000080 /* Directed IPv6 Packet Wakeup Enable */ -#define E1000_WUFC_IGNORE_TCO 0x00008000 /* Ignore WakeOn TCO packets */ -#define E1000_WUFC_FLX0 0x00010000 /* Flexible Filter 0 Enable */ -#define E1000_WUFC_FLX1 0x00020000 /* Flexible Filter 1 Enable */ -#define E1000_WUFC_FLX2 0x00040000 /* Flexible Filter 2 Enable */ -#define E1000_WUFC_FLX3 0x00080000 /* Flexible Filter 3 Enable */ -#define E1000_WUFC_ALL_FILTERS 0x000F00FF /* Mask for all wakeup filters */ -#define E1000_WUFC_FLX_OFFSET 16 /* Offset to the Flexible Filters bits */ -#define E1000_WUFC_FLX_FILTERS 0x000F0000 /* Mask for the 4 flexible filters */ +#define E1000_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */ +#define E1000_WUFC_MAG 0x00000002 /* Magic Packet Wakeup Enable */ +#define E1000_WUFC_EX 0x00000004 /* Directed Exact Wakeup Enable */ +#define E1000_WUFC_MC 0x00000008 /* Directed Multicast Wakeup Enable */ +#define E1000_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */ +#define E1000_WUFC_ARP 0x00000020 /* ARP Request Packet Wakeup Enable */ +#define E1000_WUFC_IPV4 0x00000040 /* Directed IPv4 Packet Wakeup Enable */ +#define E1000_WUFC_IPV6 0x00000080 /* Directed IPv6 Packet Wakeup Enable */ +#define E1000_WUFC_IGNORE_TCO 0x00008000 /* Ignore WakeOn TCO packets */ +#define E1000_WUFC_FLX0 0x00010000 /* Flexible Filter 0 Enable */ +#define E1000_WUFC_FLX1 0x00020000 /* Flexible Filter 1 Enable */ +#define E1000_WUFC_FLX2 0x00040000 /* Flexible Filter 2 Enable */ +#define E1000_WUFC_FLX3 0x00080000 /* Flexible Filter 3 Enable */ +#define E1000_WUFC_ALL_FILTERS 0x000F00FF /* Mask for all wakeup filters */ +#define E1000_WUFC_FLX_OFFSET 16 /* Offset to the Flexible Filters bits */ +#define E1000_WUFC_FLX_FILTERS 0x000F0000 /* Mask for the 4 flexible filters */ /* Wake Up Status */ -#define E1000_WUS_LNKC 0x00000001 /* Link Status Changed */ -#define E1000_WUS_MAG 0x00000002 /* Magic Packet Received */ -#define E1000_WUS_EX 0x00000004 /* Directed Exact Received */ -#define E1000_WUS_MC 0x00000008 /* Directed Multicast Received */ -#define E1000_WUS_BC 0x00000010 /* Broadcast Received */ -#define E1000_WUS_ARP 0x00000020 /* ARP Request Packet Received */ -#define E1000_WUS_IPV4 0x00000040 /* Directed IPv4 Packet Wakeup Received */ -#define E1000_WUS_IPV6 0x00000080 /* Directed IPv6 Packet Wakeup Received */ -#define E1000_WUS_FLX0 0x00010000 /* Flexible Filter 0 Match */ -#define E1000_WUS_FLX1 0x00020000 /* Flexible Filter 1 Match */ -#define E1000_WUS_FLX2 0x00040000 /* Flexible Filter 2 Match */ -#define E1000_WUS_FLX3 0x00080000 /* Flexible Filter 3 Match */ -#define E1000_WUS_FLX_FILTERS 0x000F0000 /* Mask for the 4 flexible filters */ +#define E1000_WUS_LNKC 0x00000001 /* Link Status Changed */ +#define E1000_WUS_MAG 0x00000002 /* Magic Packet Received */ +#define E1000_WUS_EX 0x00000004 /* Directed Exact Received */ +#define E1000_WUS_MC 0x00000008 /* Directed Multicast Received */ +#define E1000_WUS_BC 0x00000010 /* Broadcast Received */ +#define E1000_WUS_ARP 0x00000020 /* ARP Request Packet Received */ +#define E1000_WUS_IPV4 0x00000040 /* Directed IPv4 Packet Wakeup Received */ +#define E1000_WUS_IPV6 0x00000080 /* Directed IPv6 Packet Wakeup Received */ +#define E1000_WUS_FLX0 0x00010000 /* Flexible Filter 0 Match */ +#define E1000_WUS_FLX1 0x00020000 /* Flexible Filter 1 Match */ +#define E1000_WUS_FLX2 0x00040000 /* Flexible Filter 2 Match */ +#define E1000_WUS_FLX3 0x00080000 /* Flexible Filter 3 Match */ +#define E1000_WUS_FLX_FILTERS 0x000F0000 /* Mask for the 4 flexible filters */ /* Management Control */ -#define E1000_MANC_SMBUS_EN 0x00000001 /* SMBus Enabled - RO */ -#define E1000_MANC_ASF_EN 0x00000002 /* ASF Enabled - RO */ -#define E1000_MANC_R_ON_FORCE 0x00000004 /* Reset on Force TCO - RO */ -#define E1000_MANC_RMCP_EN 0x00000100 /* Enable RCMP 026Fh Filtering */ -#define E1000_MANC_0298_EN 0x00000200 /* Enable RCMP 0298h Filtering */ -#define E1000_MANC_IPV4_EN 0x00000400 /* Enable IPv4 */ -#define E1000_MANC_IPV6_EN 0x00000800 /* Enable IPv6 */ -#define E1000_MANC_SNAP_EN 0x00001000 /* Accept LLC/SNAP */ -#define E1000_MANC_ARP_EN 0x00002000 /* Enable ARP Request Filtering */ -#define E1000_MANC_NEIGHBOR_EN 0x00004000 /* Enable Neighbor Discovery - * Filtering */ -#define E1000_MANC_ARP_RES_EN 0x00008000 /* Enable ARP response Filtering */ -#define E1000_MANC_TCO_RESET 0x00010000 /* TCO Reset Occurred */ -#define E1000_MANC_RCV_TCO_EN 0x00020000 /* Receive TCO Packets Enabled */ -#define E1000_MANC_REPORT_STATUS 0x00040000 /* Status Reporting Enabled */ -#define E1000_MANC_RCV_ALL 0x00080000 /* Receive All Enabled */ -#define E1000_MANC_BLK_PHY_RST_ON_IDE 0x00040000 /* Block phy resets */ -#define E1000_MANC_EN_MAC_ADDR_FILTER 0x00100000 /* Enable MAC address - * filtering */ -#define E1000_MANC_EN_MNG2HOST 0x00200000 /* Enable MNG packets to host - * memory */ -#define E1000_MANC_EN_IP_ADDR_FILTER 0x00400000 /* Enable IP address - * filtering */ -#define E1000_MANC_EN_XSUM_FILTER 0x00800000 /* Enable checksum filtering */ -#define E1000_MANC_BR_EN 0x01000000 /* Enable broadcast filtering */ -#define E1000_MANC_SMB_REQ 0x01000000 /* SMBus Request */ -#define E1000_MANC_SMB_GNT 0x02000000 /* SMBus Grant */ -#define E1000_MANC_SMB_CLK_IN 0x04000000 /* SMBus Clock In */ -#define E1000_MANC_SMB_DATA_IN 0x08000000 /* SMBus Data In */ -#define E1000_MANC_SMB_DATA_OUT 0x10000000 /* SMBus Data Out */ -#define E1000_MANC_SMB_CLK_OUT 0x20000000 /* SMBus Clock Out */ - -#define E1000_MANC_SMB_DATA_OUT_SHIFT 28 /* SMBus Data Out Shift */ -#define E1000_MANC_SMB_CLK_OUT_SHIFT 29 /* SMBus Clock Out Shift */ +#define E1000_MANC_SMBUS_EN 0x00000001 /* SMBus Enabled - RO */ +#define E1000_MANC_ASF_EN 0x00000002 /* ASF Enabled - RO */ +#define E1000_MANC_R_ON_FORCE 0x00000004 /* Reset on Force TCO - RO */ +#define E1000_MANC_RMCP_EN 0x00000100 /* Enable RCMP 026Fh Filtering */ +#define E1000_MANC_0298_EN 0x00000200 /* Enable RCMP 0298h Filtering */ +#define E1000_MANC_IPV4_EN 0x00000400 /* Enable IPv4 */ +#define E1000_MANC_IPV6_EN 0x00000800 /* Enable IPv6 */ +#define E1000_MANC_SNAP_EN 0x00001000 /* Accept LLC/SNAP */ +#define E1000_MANC_ARP_EN 0x00002000 /* Enable ARP Request Filtering */ +#define E1000_MANC_NEIGHBOR_EN 0x00004000 /* Enable Neighbor Discovery + * Filtering */ +#define E1000_MANC_ARP_RES_EN 0x00008000 /* Enable ARP response Filtering */ +#define E1000_MANC_TCO_RESET 0x00010000 /* TCO Reset Occurred */ +#define E1000_MANC_RCV_TCO_EN 0x00020000 /* Receive TCO Packets Enabled */ +#define E1000_MANC_REPORT_STATUS 0x00040000 /* Status Reporting Enabled */ +#define E1000_MANC_RCV_ALL 0x00080000 /* Receive All Enabled */ +#define E1000_MANC_BLK_PHY_RST_ON_IDE 0x00040000 /* Block phy resets */ +#define E1000_MANC_EN_MAC_ADDR_FILTER 0x00100000 /* Enable MAC address + * filtering */ +#define E1000_MANC_EN_MNG2HOST 0x00200000 /* Enable MNG packets to host + * memory */ +#define E1000_MANC_EN_IP_ADDR_FILTER 0x00400000 /* Enable IP address + * filtering */ +#define E1000_MANC_EN_XSUM_FILTER 0x00800000 /* Enable checksum filtering */ +#define E1000_MANC_BR_EN 0x01000000 /* Enable broadcast filtering */ +#define E1000_MANC_SMB_REQ 0x01000000 /* SMBus Request */ +#define E1000_MANC_SMB_GNT 0x02000000 /* SMBus Grant */ +#define E1000_MANC_SMB_CLK_IN 0x04000000 /* SMBus Clock In */ +#define E1000_MANC_SMB_DATA_IN 0x08000000 /* SMBus Data In */ +#define E1000_MANC_SMB_DATA_OUT 0x10000000 /* SMBus Data Out */ +#define E1000_MANC_SMB_CLK_OUT 0x20000000 /* SMBus Clock Out */ + +#define E1000_MANC_SMB_DATA_OUT_SHIFT 28 /* SMBus Data Out Shift */ +#define E1000_MANC_SMB_CLK_OUT_SHIFT 29 /* SMBus Clock Out Shift */ /* SW Semaphore Register */ -#define E1000_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */ -#define E1000_SWSM_SWESMBI 0x00000002 /* FW Semaphore bit */ -#define E1000_SWSM_WMNG 0x00000004 /* Wake MNG Clock */ -#define E1000_SWSM_DRV_LOAD 0x00000008 /* Driver Loaded Bit */ +#define E1000_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */ +#define E1000_SWSM_SWESMBI 0x00000002 /* FW Semaphore bit */ +#define E1000_SWSM_WMNG 0x00000004 /* Wake MNG Clock */ +#define E1000_SWSM_DRV_LOAD 0x00000008 /* Driver Loaded Bit */ /* FW Semaphore Register */ -#define E1000_FWSM_MODE_MASK 0x0000000E /* FW mode */ +#define E1000_FWSM_MODE_MASK 0x0000000E /* FW mode */ #define E1000_FWSM_MODE_SHIFT 1 -#define E1000_FWSM_FW_VALID 0x00008000 /* FW established a valid mode */ +#define E1000_FWSM_FW_VALID 0x00008000 /* FW established a valid mode */ -#define E1000_FWSM_RSPCIPHY 0x00000040 /* Reset PHY on PCI reset */ -#define E1000_FWSM_DISSW 0x10000000 /* FW disable SW Write Access */ -#define E1000_FWSM_SKUSEL_MASK 0x60000000 /* LAN SKU select */ +#define E1000_FWSM_RSPCIPHY 0x00000040 /* Reset PHY on PCI reset */ +#define E1000_FWSM_DISSW 0x10000000 /* FW disable SW Write Access */ +#define E1000_FWSM_SKUSEL_MASK 0x60000000 /* LAN SKU select */ #define E1000_FWSM_SKUEL_SHIFT 29 -#define E1000_FWSM_SKUSEL_EMB 0x0 /* Embedded SKU */ -#define E1000_FWSM_SKUSEL_CONS 0x1 /* Consumer SKU */ -#define E1000_FWSM_SKUSEL_PERF_100 0x2 /* Perf & Corp 10/100 SKU */ -#define E1000_FWSM_SKUSEL_PERF_GBE 0x3 /* Perf & Copr GbE SKU */ +#define E1000_FWSM_SKUSEL_EMB 0x0 /* Embedded SKU */ +#define E1000_FWSM_SKUSEL_CONS 0x1 /* Consumer SKU */ +#define E1000_FWSM_SKUSEL_PERF_100 0x2 /* Perf & Corp 10/100 SKU */ +#define E1000_FWSM_SKUSEL_PERF_GBE 0x3 /* Perf & Copr GbE SKU */ /* FFLT Debug Register */ -#define E1000_FFLT_DBG_INVC 0x00100000 /* Invalid /C/ code handling */ +#define E1000_FFLT_DBG_INVC 0x00100000 /* Invalid /C/ code handling */ typedef enum { - e1000_mng_mode_none = 0, - e1000_mng_mode_asf, - e1000_mng_mode_pt, - e1000_mng_mode_ipmi, - e1000_mng_mode_host_interface_only + e1000_mng_mode_none = 0, + e1000_mng_mode_asf, + e1000_mng_mode_pt, + e1000_mng_mode_ipmi, + e1000_mng_mode_host_interface_only } e1000_mng_mode; -/* Host Inteface Control Register */ -#define E1000_HICR_EN 0x00000001 /* Enable Bit - RO */ -#define E1000_HICR_C 0x00000002 /* Driver sets this bit when done - * to put command in RAM */ -#define E1000_HICR_SV 0x00000004 /* Status Validity */ -#define E1000_HICR_FWR 0x00000080 /* FW reset. Set by the Host */ +/* Host Interface Control Register */ +#define E1000_HICR_EN 0x00000001 /* Enable Bit - RO */ +#define E1000_HICR_C 0x00000002 /* Driver sets this bit when done + * to put command in RAM */ +#define E1000_HICR_SV 0x00000004 /* Status Validity */ +#define E1000_HICR_FWR 0x00000080 /* FW reset. Set by the Host */ /* Host Interface Command Interface - Address range 0x8800-0x8EFF */ -#define E1000_HI_MAX_DATA_LENGTH 252 /* Host Interface data length */ -#define E1000_HI_MAX_BLOCK_BYTE_LENGTH 1792 /* Number of bytes in range */ -#define E1000_HI_MAX_BLOCK_DWORD_LENGTH 448 /* Number of dwords in range */ -#define E1000_HI_COMMAND_TIMEOUT 500 /* Time in ms to process HI command */ +#define E1000_HI_MAX_DATA_LENGTH 252 /* Host Interface data length */ +#define E1000_HI_MAX_BLOCK_BYTE_LENGTH 1792 /* Number of bytes in range */ +#define E1000_HI_MAX_BLOCK_DWORD_LENGTH 448 /* Number of dwords in range */ +#define E1000_HI_COMMAND_TIMEOUT 500 /* Time in ms to process HI command */ struct e1000_host_command_header { - u8 command_id; - u8 command_length; - u8 command_options; /* I/F bits for command, status for return */ - u8 checksum; + u8 command_id; + u8 command_length; + u8 command_options; /* I/F bits for command, status for return */ + u8 checksum; }; struct e1000_host_command_info { - struct e1000_host_command_header command_header; /* Command Head/Command Result Head has 4 bytes */ - u8 command_data[E1000_HI_MAX_DATA_LENGTH]; /* Command data can length 0..252 */ + struct e1000_host_command_header command_header; /* Command Head/Command Result Head has 4 bytes */ + u8 command_data[E1000_HI_MAX_DATA_LENGTH]; /* Command data can length 0..252 */ }; /* Host SMB register #0 */ -#define E1000_HSMC0R_CLKIN 0x00000001 /* SMB Clock in */ -#define E1000_HSMC0R_DATAIN 0x00000002 /* SMB Data in */ -#define E1000_HSMC0R_DATAOUT 0x00000004 /* SMB Data out */ -#define E1000_HSMC0R_CLKOUT 0x00000008 /* SMB Clock out */ +#define E1000_HSMC0R_CLKIN 0x00000001 /* SMB Clock in */ +#define E1000_HSMC0R_DATAIN 0x00000002 /* SMB Data in */ +#define E1000_HSMC0R_DATAOUT 0x00000004 /* SMB Data out */ +#define E1000_HSMC0R_CLKOUT 0x00000008 /* SMB Clock out */ /* Host SMB register #1 */ #define E1000_HSMC1R_CLKIN E1000_HSMC0R_CLKIN @@ -2185,10 +2096,10 @@ struct e1000_host_command_info { #define E1000_HSMC1R_CLKOUT E1000_HSMC0R_CLKOUT /* FW Status Register */ -#define E1000_FWSTS_FWS_MASK 0x000000FF /* FW Status */ +#define E1000_FWSTS_FWS_MASK 0x000000FF /* FW Status */ /* Wake Up Packet Length */ -#define E1000_WUPL_LENGTH_MASK 0x0FFF /* Only the lower 12 bits are valid */ +#define E1000_WUPL_LENGTH_MASK 0x0FFF /* Only the lower 12 bits are valid */ #define E1000_MDALIGN 4096 @@ -2242,24 +2153,24 @@ struct e1000_host_command_info { #define PCI_EX_LINK_WIDTH_SHIFT 4 /* EEPROM Commands - Microwire */ -#define EEPROM_READ_OPCODE_MICROWIRE 0x6 /* EEPROM read opcode */ -#define EEPROM_WRITE_OPCODE_MICROWIRE 0x5 /* EEPROM write opcode */ -#define EEPROM_ERASE_OPCODE_MICROWIRE 0x7 /* EEPROM erase opcode */ -#define EEPROM_EWEN_OPCODE_MICROWIRE 0x13 /* EEPROM erase/write enable */ -#define EEPROM_EWDS_OPCODE_MICROWIRE 0x10 /* EEPROM erast/write disable */ +#define EEPROM_READ_OPCODE_MICROWIRE 0x6 /* EEPROM read opcode */ +#define EEPROM_WRITE_OPCODE_MICROWIRE 0x5 /* EEPROM write opcode */ +#define EEPROM_ERASE_OPCODE_MICROWIRE 0x7 /* EEPROM erase opcode */ +#define EEPROM_EWEN_OPCODE_MICROWIRE 0x13 /* EEPROM erase/write enable */ +#define EEPROM_EWDS_OPCODE_MICROWIRE 0x10 /* EEPROM erase/write disable */ /* EEPROM Commands - SPI */ -#define EEPROM_MAX_RETRY_SPI 5000 /* Max wait of 5ms, for RDY signal */ -#define EEPROM_READ_OPCODE_SPI 0x03 /* EEPROM read opcode */ -#define EEPROM_WRITE_OPCODE_SPI 0x02 /* EEPROM write opcode */ -#define EEPROM_A8_OPCODE_SPI 0x08 /* opcode bit-3 = address bit-8 */ -#define EEPROM_WREN_OPCODE_SPI 0x06 /* EEPROM set Write Enable latch */ -#define EEPROM_WRDI_OPCODE_SPI 0x04 /* EEPROM reset Write Enable latch */ -#define EEPROM_RDSR_OPCODE_SPI 0x05 /* EEPROM read Status register */ -#define EEPROM_WRSR_OPCODE_SPI 0x01 /* EEPROM write Status register */ -#define EEPROM_ERASE4K_OPCODE_SPI 0x20 /* EEPROM ERASE 4KB */ -#define EEPROM_ERASE64K_OPCODE_SPI 0xD8 /* EEPROM ERASE 64KB */ -#define EEPROM_ERASE256_OPCODE_SPI 0xDB /* EEPROM ERASE 256B */ +#define EEPROM_MAX_RETRY_SPI 5000 /* Max wait of 5ms, for RDY signal */ +#define EEPROM_READ_OPCODE_SPI 0x03 /* EEPROM read opcode */ +#define EEPROM_WRITE_OPCODE_SPI 0x02 /* EEPROM write opcode */ +#define EEPROM_A8_OPCODE_SPI 0x08 /* opcode bit-3 = address bit-8 */ +#define EEPROM_WREN_OPCODE_SPI 0x06 /* EEPROM set Write Enable latch */ +#define EEPROM_WRDI_OPCODE_SPI 0x04 /* EEPROM reset Write Enable latch */ +#define EEPROM_RDSR_OPCODE_SPI 0x05 /* EEPROM read Status register */ +#define EEPROM_WRSR_OPCODE_SPI 0x01 /* EEPROM write Status register */ +#define EEPROM_ERASE4K_OPCODE_SPI 0x20 /* EEPROM ERASE 4KB */ +#define EEPROM_ERASE64K_OPCODE_SPI 0xD8 /* EEPROM ERASE 64KB */ +#define EEPROM_ERASE256_OPCODE_SPI 0xDB /* EEPROM ERASE 256B */ /* EEPROM Size definitions */ #define EEPROM_WORD_SIZE_SHIFT 6 @@ -2270,7 +2181,7 @@ struct e1000_host_command_info { #define EEPROM_COMPAT 0x0003 #define EEPROM_ID_LED_SETTINGS 0x0004 #define EEPROM_VERSION 0x0005 -#define EEPROM_SERDES_AMPLITUDE 0x0006 /* For SERDES output amplitude adjustment. */ +#define EEPROM_SERDES_AMPLITUDE 0x0006 /* For SERDES output amplitude adjustment. */ #define EEPROM_PHY_CLASS_WORD 0x0007 #define EEPROM_INIT_CONTROL1_REG 0x000A #define EEPROM_INIT_CONTROL2_REG 0x000F @@ -2283,22 +2194,16 @@ struct e1000_host_command_info { #define EEPROM_FLASH_VERSION 0x0032 #define EEPROM_CHECKSUM_REG 0x003F -#define E1000_EEPROM_CFG_DONE 0x00040000 /* MNG config cycle done */ -#define E1000_EEPROM_CFG_DONE_PORT_1 0x00080000 /* ...for second port */ +#define E1000_EEPROM_CFG_DONE 0x00040000 /* MNG config cycle done */ +#define E1000_EEPROM_CFG_DONE_PORT_1 0x00080000 /* ...for second port */ /* Word definitions for ID LED Settings */ #define ID_LED_RESERVED_0000 0x0000 #define ID_LED_RESERVED_FFFF 0xFFFF -#define ID_LED_RESERVED_82573 0xF746 -#define ID_LED_DEFAULT_82573 0x1811 #define ID_LED_DEFAULT ((ID_LED_OFF1_ON2 << 12) | \ (ID_LED_OFF1_OFF2 << 8) | \ (ID_LED_DEF1_DEF2 << 4) | \ (ID_LED_DEF1_DEF2)) -#define ID_LED_DEFAULT_ICH8LAN ((ID_LED_DEF1_DEF2 << 12) | \ - (ID_LED_DEF1_OFF2 << 8) | \ - (ID_LED_DEF1_ON2 << 4) | \ - (ID_LED_DEF1_DEF2)) #define ID_LED_DEF1_DEF2 0x1 #define ID_LED_DEF1_ON2 0x2 #define ID_LED_DEF1_OFF2 0x3 @@ -2313,7 +2218,6 @@ struct e1000_host_command_info { #define IGP_ACTIVITY_LED_ENABLE 0x0300 #define IGP_LED3_MODE 0x07000000 - /* Mask bits for SERDES amplitude adjustment in Word 6 of the EEPROM */ #define EEPROM_SERDES_AMPLITUDE_MASK 0x000F @@ -2384,11 +2288,8 @@ struct e1000_host_command_info { #define DEFAULT_82542_TIPG_IPGR2 10 #define DEFAULT_82543_TIPG_IPGR2 6 -#define DEFAULT_80003ES2LAN_TIPG_IPGR2 7 #define E1000_TIPG_IPGR2_SHIFT 20 -#define DEFAULT_80003ES2LAN_TIPG_IPGT_10_100 0x00000009 -#define DEFAULT_80003ES2LAN_TIPG_IPGT_1000 0x00000008 #define E1000_TXDMAC_DPP 0x00000001 /* Adaptive IFS defines */ @@ -2421,9 +2322,9 @@ struct e1000_host_command_info { #define E1000_EXTCNF_CTRL_SWFLAG 0x00000020 /* PBA constants */ -#define E1000_PBA_8K 0x0008 /* 8KB, default Rx allocation */ -#define E1000_PBA_12K 0x000C /* 12KB, default Rx allocation */ -#define E1000_PBA_16K 0x0010 /* 16KB, default TX allocation */ +#define E1000_PBA_8K 0x0008 /* 8KB, default Rx allocation */ +#define E1000_PBA_12K 0x000C /* 12KB, default Rx allocation */ +#define E1000_PBA_16K 0x0010 /* 16KB, default TX allocation */ #define E1000_PBA_20K 0x0014 #define E1000_PBA_22K 0x0016 #define E1000_PBA_24K 0x0018 @@ -2432,7 +2333,7 @@ struct e1000_host_command_info { #define E1000_PBA_34K 0x0022 #define E1000_PBA_38K 0x0026 #define E1000_PBA_40K 0x0028 -#define E1000_PBA_48K 0x0030 /* 48KB, default RX allocation */ +#define E1000_PBA_48K 0x0030 /* 48KB, default RX allocation */ #define E1000_PBS_16K E1000_PBA_16K @@ -2442,9 +2343,9 @@ struct e1000_host_command_info { #define FLOW_CONTROL_TYPE 0x8808 /* The historical defaults for the flow control values are given below. */ -#define FC_DEFAULT_HI_THRESH (0x8000) /* 32KB */ -#define FC_DEFAULT_LO_THRESH (0x4000) /* 16KB */ -#define FC_DEFAULT_TX_TIMER (0x100) /* ~130 us */ +#define FC_DEFAULT_HI_THRESH (0x8000) /* 32KB */ +#define FC_DEFAULT_LO_THRESH (0x4000) /* 16KB */ +#define FC_DEFAULT_TX_TIMER (0x100) /* ~130 us */ /* PCIX Config space */ #define PCIX_COMMAND_REGISTER 0xE6 @@ -2458,7 +2359,6 @@ struct e1000_host_command_info { #define PCIX_STATUS_HI_MMRBC_4K 0x3 #define PCIX_STATUS_HI_MMRBC_2K 0x2 - /* Number of bits required to shift right the "pause" bits from the * EEPROM (bits 13:12) to the "pause" (bits 8:7) field in the TXCW register. */ @@ -2479,14 +2379,11 @@ struct e1000_host_command_info { */ #define ILOS_SHIFT 3 - #define RECEIVE_BUFFER_ALIGN_SIZE (256) /* Number of milliseconds we wait for auto-negotiation to complete */ #define LINK_UP_TIMEOUT 500 -/* Number of 100 microseconds we wait for PCI Express master disable */ -#define MASTER_DISABLE_TIMEOUT 800 /* Number of milliseconds we wait for Eeprom auto read bit done after MAC reset */ #define AUTO_READ_DONE_TIMEOUT 10 /* Number of milliseconds we wait for PHY configuration done after MAC reset */ @@ -2534,7 +2431,6 @@ struct e1000_host_command_info { (((length) > (adapter)->min_frame_size) && \ ((length) <= ((adapter)->max_frame_size + VLAN_TAG_SIZE + 1))))) - /* Structures, enums, and macros for the PHY */ /* Bit definitions for the Management Data IO (MDIO) and Management Data @@ -2551,49 +2447,49 @@ struct e1000_host_command_info { /* PHY 1000 MII Register/Bit Definitions */ /* PHY Registers defined by IEEE */ -#define PHY_CTRL 0x00 /* Control Register */ -#define PHY_STATUS 0x01 /* Status Regiser */ -#define PHY_ID1 0x02 /* Phy Id Reg (word 1) */ -#define PHY_ID2 0x03 /* Phy Id Reg (word 2) */ -#define PHY_AUTONEG_ADV 0x04 /* Autoneg Advertisement */ -#define PHY_LP_ABILITY 0x05 /* Link Partner Ability (Base Page) */ -#define PHY_AUTONEG_EXP 0x06 /* Autoneg Expansion Reg */ -#define PHY_NEXT_PAGE_TX 0x07 /* Next Page TX */ -#define PHY_LP_NEXT_PAGE 0x08 /* Link Partner Next Page */ -#define PHY_1000T_CTRL 0x09 /* 1000Base-T Control Reg */ -#define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */ -#define PHY_EXT_STATUS 0x0F /* Extended Status Reg */ - -#define MAX_PHY_REG_ADDRESS 0x1F /* 5 bit address bus (0-0x1F) */ -#define MAX_PHY_MULTI_PAGE_REG 0xF /* Registers equal on all pages */ +#define PHY_CTRL 0x00 /* Control Register */ +#define PHY_STATUS 0x01 /* Status Register */ +#define PHY_ID1 0x02 /* Phy Id Reg (word 1) */ +#define PHY_ID2 0x03 /* Phy Id Reg (word 2) */ +#define PHY_AUTONEG_ADV 0x04 /* Autoneg Advertisement */ +#define PHY_LP_ABILITY 0x05 /* Link Partner Ability (Base Page) */ +#define PHY_AUTONEG_EXP 0x06 /* Autoneg Expansion Reg */ +#define PHY_NEXT_PAGE_TX 0x07 /* Next Page TX */ +#define PHY_LP_NEXT_PAGE 0x08 /* Link Partner Next Page */ +#define PHY_1000T_CTRL 0x09 /* 1000Base-T Control Reg */ +#define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */ +#define PHY_EXT_STATUS 0x0F /* Extended Status Reg */ + +#define MAX_PHY_REG_ADDRESS 0x1F /* 5 bit address bus (0-0x1F) */ +#define MAX_PHY_MULTI_PAGE_REG 0xF /* Registers equal on all pages */ /* M88E1000 Specific Registers */ -#define M88E1000_PHY_SPEC_CTRL 0x10 /* PHY Specific Control Register */ -#define M88E1000_PHY_SPEC_STATUS 0x11 /* PHY Specific Status Register */ -#define M88E1000_INT_ENABLE 0x12 /* Interrupt Enable Register */ -#define M88E1000_INT_STATUS 0x13 /* Interrupt Status Register */ -#define M88E1000_EXT_PHY_SPEC_CTRL 0x14 /* Extended PHY Specific Control */ -#define M88E1000_RX_ERR_CNTR 0x15 /* Receive Error Counter */ - -#define M88E1000_PHY_EXT_CTRL 0x1A /* PHY extend control register */ -#define M88E1000_PHY_PAGE_SELECT 0x1D /* Reg 29 for page number setting */ -#define M88E1000_PHY_GEN_CONTROL 0x1E /* Its meaning depends on reg 29 */ -#define M88E1000_PHY_VCO_REG_BIT8 0x100 /* Bits 8 & 11 are adjusted for */ -#define M88E1000_PHY_VCO_REG_BIT11 0x800 /* improved BER performance */ +#define M88E1000_PHY_SPEC_CTRL 0x10 /* PHY Specific Control Register */ +#define M88E1000_PHY_SPEC_STATUS 0x11 /* PHY Specific Status Register */ +#define M88E1000_INT_ENABLE 0x12 /* Interrupt Enable Register */ +#define M88E1000_INT_STATUS 0x13 /* Interrupt Status Register */ +#define M88E1000_EXT_PHY_SPEC_CTRL 0x14 /* Extended PHY Specific Control */ +#define M88E1000_RX_ERR_CNTR 0x15 /* Receive Error Counter */ + +#define M88E1000_PHY_EXT_CTRL 0x1A /* PHY extend control register */ +#define M88E1000_PHY_PAGE_SELECT 0x1D /* Reg 29 for page number setting */ +#define M88E1000_PHY_GEN_CONTROL 0x1E /* Its meaning depends on reg 29 */ +#define M88E1000_PHY_VCO_REG_BIT8 0x100 /* Bits 8 & 11 are adjusted for */ +#define M88E1000_PHY_VCO_REG_BIT11 0x800 /* improved BER performance */ #define IGP01E1000_IEEE_REGS_PAGE 0x0000 #define IGP01E1000_IEEE_RESTART_AUTONEG 0x3300 #define IGP01E1000_IEEE_FORCE_GIGA 0x0140 /* IGP01E1000 Specific Registers */ -#define IGP01E1000_PHY_PORT_CONFIG 0x10 /* PHY Specific Port Config Register */ -#define IGP01E1000_PHY_PORT_STATUS 0x11 /* PHY Specific Status Register */ -#define IGP01E1000_PHY_PORT_CTRL 0x12 /* PHY Specific Control Register */ -#define IGP01E1000_PHY_LINK_HEALTH 0x13 /* PHY Link Health Register */ -#define IGP01E1000_GMII_FIFO 0x14 /* GMII FIFO Register */ -#define IGP01E1000_PHY_CHANNEL_QUALITY 0x15 /* PHY Channel Quality Register */ +#define IGP01E1000_PHY_PORT_CONFIG 0x10 /* PHY Specific Port Config Register */ +#define IGP01E1000_PHY_PORT_STATUS 0x11 /* PHY Specific Status Register */ +#define IGP01E1000_PHY_PORT_CTRL 0x12 /* PHY Specific Control Register */ +#define IGP01E1000_PHY_LINK_HEALTH 0x13 /* PHY Link Health Register */ +#define IGP01E1000_GMII_FIFO 0x14 /* GMII FIFO Register */ +#define IGP01E1000_PHY_CHANNEL_QUALITY 0x15 /* PHY Channel Quality Register */ #define IGP02E1000_PHY_POWER_MGMT 0x19 -#define IGP01E1000_PHY_PAGE_SELECT 0x1F /* PHY Page Select Core Register */ +#define IGP01E1000_PHY_PAGE_SELECT 0x1F /* PHY Page Select Core Register */ /* IGP01E1000 AGC Registers - stores the cable length values*/ #define IGP01E1000_PHY_AGC_A 0x1172 @@ -2636,192 +2532,119 @@ struct e1000_host_command_info { #define IGP01E1000_ANALOG_REGS_PAGE 0x20C0 -/* Bits... - * 15-5: page - * 4-0: register offset - */ -#define GG82563_PAGE_SHIFT 5 -#define GG82563_REG(page, reg) \ - (((page) << GG82563_PAGE_SHIFT) | ((reg) & MAX_PHY_REG_ADDRESS)) -#define GG82563_MIN_ALT_REG 30 - -/* GG82563 Specific Registers */ -#define GG82563_PHY_SPEC_CTRL \ - GG82563_REG(0, 16) /* PHY Specific Control */ -#define GG82563_PHY_SPEC_STATUS \ - GG82563_REG(0, 17) /* PHY Specific Status */ -#define GG82563_PHY_INT_ENABLE \ - GG82563_REG(0, 18) /* Interrupt Enable */ -#define GG82563_PHY_SPEC_STATUS_2 \ - GG82563_REG(0, 19) /* PHY Specific Status 2 */ -#define GG82563_PHY_RX_ERR_CNTR \ - GG82563_REG(0, 21) /* Receive Error Counter */ -#define GG82563_PHY_PAGE_SELECT \ - GG82563_REG(0, 22) /* Page Select */ -#define GG82563_PHY_SPEC_CTRL_2 \ - GG82563_REG(0, 26) /* PHY Specific Control 2 */ -#define GG82563_PHY_PAGE_SELECT_ALT \ - GG82563_REG(0, 29) /* Alternate Page Select */ -#define GG82563_PHY_TEST_CLK_CTRL \ - GG82563_REG(0, 30) /* Test Clock Control (use reg. 29 to select) */ - -#define GG82563_PHY_MAC_SPEC_CTRL \ - GG82563_REG(2, 21) /* MAC Specific Control Register */ -#define GG82563_PHY_MAC_SPEC_CTRL_2 \ - GG82563_REG(2, 26) /* MAC Specific Control 2 */ - -#define GG82563_PHY_DSP_DISTANCE \ - GG82563_REG(5, 26) /* DSP Distance */ - -/* Page 193 - Port Control Registers */ -#define GG82563_PHY_KMRN_MODE_CTRL \ - GG82563_REG(193, 16) /* Kumeran Mode Control */ -#define GG82563_PHY_PORT_RESET \ - GG82563_REG(193, 17) /* Port Reset */ -#define GG82563_PHY_REVISION_ID \ - GG82563_REG(193, 18) /* Revision ID */ -#define GG82563_PHY_DEVICE_ID \ - GG82563_REG(193, 19) /* Device ID */ -#define GG82563_PHY_PWR_MGMT_CTRL \ - GG82563_REG(193, 20) /* Power Management Control */ -#define GG82563_PHY_RATE_ADAPT_CTRL \ - GG82563_REG(193, 25) /* Rate Adaptation Control */ - -/* Page 194 - KMRN Registers */ -#define GG82563_PHY_KMRN_FIFO_CTRL_STAT \ - GG82563_REG(194, 16) /* FIFO's Control/Status */ -#define GG82563_PHY_KMRN_CTRL \ - GG82563_REG(194, 17) /* Control */ -#define GG82563_PHY_INBAND_CTRL \ - GG82563_REG(194, 18) /* Inband Control */ -#define GG82563_PHY_KMRN_DIAGNOSTIC \ - GG82563_REG(194, 19) /* Diagnostic */ -#define GG82563_PHY_ACK_TIMEOUTS \ - GG82563_REG(194, 20) /* Acknowledge Timeouts */ -#define GG82563_PHY_ADV_ABILITY \ - GG82563_REG(194, 21) /* Advertised Ability */ -#define GG82563_PHY_LINK_PARTNER_ADV_ABILITY \ - GG82563_REG(194, 23) /* Link Partner Advertised Ability */ -#define GG82563_PHY_ADV_NEXT_PAGE \ - GG82563_REG(194, 24) /* Advertised Next Page */ -#define GG82563_PHY_LINK_PARTNER_ADV_NEXT_PAGE \ - GG82563_REG(194, 25) /* Link Partner Advertised Next page */ -#define GG82563_PHY_KMRN_MISC \ - GG82563_REG(194, 26) /* Misc. */ - /* PHY Control Register */ -#define MII_CR_SPEED_SELECT_MSB 0x0040 /* bits 6,13: 10=1000, 01=100, 00=10 */ -#define MII_CR_COLL_TEST_ENABLE 0x0080 /* Collision test enable */ -#define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */ -#define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */ -#define MII_CR_ISOLATE 0x0400 /* Isolate PHY from MII */ -#define MII_CR_POWER_DOWN 0x0800 /* Power down */ -#define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */ -#define MII_CR_SPEED_SELECT_LSB 0x2000 /* bits 6,13: 10=1000, 01=100, 00=10 */ -#define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */ -#define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */ +#define MII_CR_SPEED_SELECT_MSB 0x0040 /* bits 6,13: 10=1000, 01=100, 00=10 */ +#define MII_CR_COLL_TEST_ENABLE 0x0080 /* Collision test enable */ +#define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */ +#define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */ +#define MII_CR_ISOLATE 0x0400 /* Isolate PHY from MII */ +#define MII_CR_POWER_DOWN 0x0800 /* Power down */ +#define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */ +#define MII_CR_SPEED_SELECT_LSB 0x2000 /* bits 6,13: 10=1000, 01=100, 00=10 */ +#define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */ +#define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */ /* PHY Status Register */ -#define MII_SR_EXTENDED_CAPS 0x0001 /* Extended register capabilities */ -#define MII_SR_JABBER_DETECT 0x0002 /* Jabber Detected */ -#define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */ -#define MII_SR_AUTONEG_CAPS 0x0008 /* Auto Neg Capable */ -#define MII_SR_REMOTE_FAULT 0x0010 /* Remote Fault Detect */ -#define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */ -#define MII_SR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */ -#define MII_SR_EXTENDED_STATUS 0x0100 /* Ext. status info in Reg 0x0F */ -#define MII_SR_100T2_HD_CAPS 0x0200 /* 100T2 Half Duplex Capable */ -#define MII_SR_100T2_FD_CAPS 0x0400 /* 100T2 Full Duplex Capable */ -#define MII_SR_10T_HD_CAPS 0x0800 /* 10T Half Duplex Capable */ -#define MII_SR_10T_FD_CAPS 0x1000 /* 10T Full Duplex Capable */ -#define MII_SR_100X_HD_CAPS 0x2000 /* 100X Half Duplex Capable */ -#define MII_SR_100X_FD_CAPS 0x4000 /* 100X Full Duplex Capable */ -#define MII_SR_100T4_CAPS 0x8000 /* 100T4 Capable */ +#define MII_SR_EXTENDED_CAPS 0x0001 /* Extended register capabilities */ +#define MII_SR_JABBER_DETECT 0x0002 /* Jabber Detected */ +#define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */ +#define MII_SR_AUTONEG_CAPS 0x0008 /* Auto Neg Capable */ +#define MII_SR_REMOTE_FAULT 0x0010 /* Remote Fault Detect */ +#define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */ +#define MII_SR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */ +#define MII_SR_EXTENDED_STATUS 0x0100 /* Ext. status info in Reg 0x0F */ +#define MII_SR_100T2_HD_CAPS 0x0200 /* 100T2 Half Duplex Capable */ +#define MII_SR_100T2_FD_CAPS 0x0400 /* 100T2 Full Duplex Capable */ +#define MII_SR_10T_HD_CAPS 0x0800 /* 10T Half Duplex Capable */ +#define MII_SR_10T_FD_CAPS 0x1000 /* 10T Full Duplex Capable */ +#define MII_SR_100X_HD_CAPS 0x2000 /* 100X Half Duplex Capable */ +#define MII_SR_100X_FD_CAPS 0x4000 /* 100X Full Duplex Capable */ +#define MII_SR_100T4_CAPS 0x8000 /* 100T4 Capable */ /* Autoneg Advertisement Register */ -#define NWAY_AR_SELECTOR_FIELD 0x0001 /* indicates IEEE 802.3 CSMA/CD */ -#define NWAY_AR_10T_HD_CAPS 0x0020 /* 10T Half Duplex Capable */ -#define NWAY_AR_10T_FD_CAPS 0x0040 /* 10T Full Duplex Capable */ -#define NWAY_AR_100TX_HD_CAPS 0x0080 /* 100TX Half Duplex Capable */ -#define NWAY_AR_100TX_FD_CAPS 0x0100 /* 100TX Full Duplex Capable */ -#define NWAY_AR_100T4_CAPS 0x0200 /* 100T4 Capable */ -#define NWAY_AR_PAUSE 0x0400 /* Pause operation desired */ -#define NWAY_AR_ASM_DIR 0x0800 /* Asymmetric Pause Direction bit */ -#define NWAY_AR_REMOTE_FAULT 0x2000 /* Remote Fault detected */ -#define NWAY_AR_NEXT_PAGE 0x8000 /* Next Page ability supported */ +#define NWAY_AR_SELECTOR_FIELD 0x0001 /* indicates IEEE 802.3 CSMA/CD */ +#define NWAY_AR_10T_HD_CAPS 0x0020 /* 10T Half Duplex Capable */ +#define NWAY_AR_10T_FD_CAPS 0x0040 /* 10T Full Duplex Capable */ +#define NWAY_AR_100TX_HD_CAPS 0x0080 /* 100TX Half Duplex Capable */ +#define NWAY_AR_100TX_FD_CAPS 0x0100 /* 100TX Full Duplex Capable */ +#define NWAY_AR_100T4_CAPS 0x0200 /* 100T4 Capable */ +#define NWAY_AR_PAUSE 0x0400 /* Pause operation desired */ +#define NWAY_AR_ASM_DIR 0x0800 /* Asymmetric Pause Direction bit */ +#define NWAY_AR_REMOTE_FAULT 0x2000 /* Remote Fault detected */ +#define NWAY_AR_NEXT_PAGE 0x8000 /* Next Page ability supported */ /* Link Partner Ability Register (Base Page) */ -#define NWAY_LPAR_SELECTOR_FIELD 0x0000 /* LP protocol selector field */ -#define NWAY_LPAR_10T_HD_CAPS 0x0020 /* LP is 10T Half Duplex Capable */ -#define NWAY_LPAR_10T_FD_CAPS 0x0040 /* LP is 10T Full Duplex Capable */ -#define NWAY_LPAR_100TX_HD_CAPS 0x0080 /* LP is 100TX Half Duplex Capable */ -#define NWAY_LPAR_100TX_FD_CAPS 0x0100 /* LP is 100TX Full Duplex Capable */ -#define NWAY_LPAR_100T4_CAPS 0x0200 /* LP is 100T4 Capable */ -#define NWAY_LPAR_PAUSE 0x0400 /* LP Pause operation desired */ -#define NWAY_LPAR_ASM_DIR 0x0800 /* LP Asymmetric Pause Direction bit */ -#define NWAY_LPAR_REMOTE_FAULT 0x2000 /* LP has detected Remote Fault */ -#define NWAY_LPAR_ACKNOWLEDGE 0x4000 /* LP has rx'd link code word */ -#define NWAY_LPAR_NEXT_PAGE 0x8000 /* Next Page ability supported */ +#define NWAY_LPAR_SELECTOR_FIELD 0x0000 /* LP protocol selector field */ +#define NWAY_LPAR_10T_HD_CAPS 0x0020 /* LP is 10T Half Duplex Capable */ +#define NWAY_LPAR_10T_FD_CAPS 0x0040 /* LP is 10T Full Duplex Capable */ +#define NWAY_LPAR_100TX_HD_CAPS 0x0080 /* LP is 100TX Half Duplex Capable */ +#define NWAY_LPAR_100TX_FD_CAPS 0x0100 /* LP is 100TX Full Duplex Capable */ +#define NWAY_LPAR_100T4_CAPS 0x0200 /* LP is 100T4 Capable */ +#define NWAY_LPAR_PAUSE 0x0400 /* LP Pause operation desired */ +#define NWAY_LPAR_ASM_DIR 0x0800 /* LP Asymmetric Pause Direction bit */ +#define NWAY_LPAR_REMOTE_FAULT 0x2000 /* LP has detected Remote Fault */ +#define NWAY_LPAR_ACKNOWLEDGE 0x4000 /* LP has rx'd link code word */ +#define NWAY_LPAR_NEXT_PAGE 0x8000 /* Next Page ability supported */ /* Autoneg Expansion Register */ -#define NWAY_ER_LP_NWAY_CAPS 0x0001 /* LP has Auto Neg Capability */ -#define NWAY_ER_PAGE_RXD 0x0002 /* LP is 10T Half Duplex Capable */ -#define NWAY_ER_NEXT_PAGE_CAPS 0x0004 /* LP is 10T Full Duplex Capable */ -#define NWAY_ER_LP_NEXT_PAGE_CAPS 0x0008 /* LP is 100TX Half Duplex Capable */ -#define NWAY_ER_PAR_DETECT_FAULT 0x0010 /* LP is 100TX Full Duplex Capable */ +#define NWAY_ER_LP_NWAY_CAPS 0x0001 /* LP has Auto Neg Capability */ +#define NWAY_ER_PAGE_RXD 0x0002 /* LP is 10T Half Duplex Capable */ +#define NWAY_ER_NEXT_PAGE_CAPS 0x0004 /* LP is 10T Full Duplex Capable */ +#define NWAY_ER_LP_NEXT_PAGE_CAPS 0x0008 /* LP is 100TX Half Duplex Capable */ +#define NWAY_ER_PAR_DETECT_FAULT 0x0010 /* LP is 100TX Full Duplex Capable */ /* Next Page TX Register */ -#define NPTX_MSG_CODE_FIELD 0x0001 /* NP msg code or unformatted data */ -#define NPTX_TOGGLE 0x0800 /* Toggles between exchanges - * of different NP - */ -#define NPTX_ACKNOWLDGE2 0x1000 /* 1 = will comply with msg - * 0 = cannot comply with msg - */ -#define NPTX_MSG_PAGE 0x2000 /* formatted(1)/unformatted(0) pg */ -#define NPTX_NEXT_PAGE 0x8000 /* 1 = addition NP will follow - * 0 = sending last NP - */ +#define NPTX_MSG_CODE_FIELD 0x0001 /* NP msg code or unformatted data */ +#define NPTX_TOGGLE 0x0800 /* Toggles between exchanges + * of different NP + */ +#define NPTX_ACKNOWLDGE2 0x1000 /* 1 = will comply with msg + * 0 = cannot comply with msg + */ +#define NPTX_MSG_PAGE 0x2000 /* formatted(1)/unformatted(0) pg */ +#define NPTX_NEXT_PAGE 0x8000 /* 1 = addition NP will follow + * 0 = sending last NP + */ /* Link Partner Next Page Register */ -#define LP_RNPR_MSG_CODE_FIELD 0x0001 /* NP msg code or unformatted data */ -#define LP_RNPR_TOGGLE 0x0800 /* Toggles between exchanges - * of different NP - */ -#define LP_RNPR_ACKNOWLDGE2 0x1000 /* 1 = will comply with msg - * 0 = cannot comply with msg - */ -#define LP_RNPR_MSG_PAGE 0x2000 /* formatted(1)/unformatted(0) pg */ -#define LP_RNPR_ACKNOWLDGE 0x4000 /* 1 = ACK / 0 = NO ACK */ -#define LP_RNPR_NEXT_PAGE 0x8000 /* 1 = addition NP will follow - * 0 = sending last NP - */ +#define LP_RNPR_MSG_CODE_FIELD 0x0001 /* NP msg code or unformatted data */ +#define LP_RNPR_TOGGLE 0x0800 /* Toggles between exchanges + * of different NP + */ +#define LP_RNPR_ACKNOWLDGE2 0x1000 /* 1 = will comply with msg + * 0 = cannot comply with msg + */ +#define LP_RNPR_MSG_PAGE 0x2000 /* formatted(1)/unformatted(0) pg */ +#define LP_RNPR_ACKNOWLDGE 0x4000 /* 1 = ACK / 0 = NO ACK */ +#define LP_RNPR_NEXT_PAGE 0x8000 /* 1 = addition NP will follow + * 0 = sending last NP + */ /* 1000BASE-T Control Register */ -#define CR_1000T_ASYM_PAUSE 0x0080 /* Advertise asymmetric pause bit */ -#define CR_1000T_HD_CAPS 0x0100 /* Advertise 1000T HD capability */ -#define CR_1000T_FD_CAPS 0x0200 /* Advertise 1000T FD capability */ -#define CR_1000T_REPEATER_DTE 0x0400 /* 1=Repeater/switch device port */ - /* 0=DTE device */ -#define CR_1000T_MS_VALUE 0x0800 /* 1=Configure PHY as Master */ - /* 0=Configure PHY as Slave */ -#define CR_1000T_MS_ENABLE 0x1000 /* 1=Master/Slave manual config value */ - /* 0=Automatic Master/Slave config */ -#define CR_1000T_TEST_MODE_NORMAL 0x0000 /* Normal Operation */ -#define CR_1000T_TEST_MODE_1 0x2000 /* Transmit Waveform test */ -#define CR_1000T_TEST_MODE_2 0x4000 /* Master Transmit Jitter test */ -#define CR_1000T_TEST_MODE_3 0x6000 /* Slave Transmit Jitter test */ -#define CR_1000T_TEST_MODE_4 0x8000 /* Transmitter Distortion test */ +#define CR_1000T_ASYM_PAUSE 0x0080 /* Advertise asymmetric pause bit */ +#define CR_1000T_HD_CAPS 0x0100 /* Advertise 1000T HD capability */ +#define CR_1000T_FD_CAPS 0x0200 /* Advertise 1000T FD capability */ +#define CR_1000T_REPEATER_DTE 0x0400 /* 1=Repeater/switch device port */ + /* 0=DTE device */ +#define CR_1000T_MS_VALUE 0x0800 /* 1=Configure PHY as Master */ + /* 0=Configure PHY as Slave */ +#define CR_1000T_MS_ENABLE 0x1000 /* 1=Master/Slave manual config value */ + /* 0=Automatic Master/Slave config */ +#define CR_1000T_TEST_MODE_NORMAL 0x0000 /* Normal Operation */ +#define CR_1000T_TEST_MODE_1 0x2000 /* Transmit Waveform test */ +#define CR_1000T_TEST_MODE_2 0x4000 /* Master Transmit Jitter test */ +#define CR_1000T_TEST_MODE_3 0x6000 /* Slave Transmit Jitter test */ +#define CR_1000T_TEST_MODE_4 0x8000 /* Transmitter Distortion test */ /* 1000BASE-T Status Register */ -#define SR_1000T_IDLE_ERROR_CNT 0x00FF /* Num idle errors since last read */ -#define SR_1000T_ASYM_PAUSE_DIR 0x0100 /* LP asymmetric pause direction bit */ -#define SR_1000T_LP_HD_CAPS 0x0400 /* LP is 1000T HD capable */ -#define SR_1000T_LP_FD_CAPS 0x0800 /* LP is 1000T FD capable */ -#define SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */ -#define SR_1000T_LOCAL_RX_STATUS 0x2000 /* Local receiver OK */ -#define SR_1000T_MS_CONFIG_RES 0x4000 /* 1=Local TX is Master, 0=Slave */ -#define SR_1000T_MS_CONFIG_FAULT 0x8000 /* Master/Slave config fault */ +#define SR_1000T_IDLE_ERROR_CNT 0x00FF /* Num idle errors since last read */ +#define SR_1000T_ASYM_PAUSE_DIR 0x0100 /* LP asymmetric pause direction bit */ +#define SR_1000T_LP_HD_CAPS 0x0400 /* LP is 1000T HD capable */ +#define SR_1000T_LP_FD_CAPS 0x0800 /* LP is 1000T FD capable */ +#define SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */ +#define SR_1000T_LOCAL_RX_STATUS 0x2000 /* Local receiver OK */ +#define SR_1000T_MS_CONFIG_RES 0x4000 /* 1=Local TX is Master, 0=Slave */ +#define SR_1000T_MS_CONFIG_FAULT 0x8000 /* Master/Slave config fault */ #define SR_1000T_REMOTE_RX_STATUS_SHIFT 12 #define SR_1000T_LOCAL_RX_STATUS_SHIFT 13 #define SR_1000T_PHY_EXCESSIVE_IDLE_ERR_COUNT 5 @@ -2829,64 +2652,64 @@ struct e1000_host_command_info { #define FFE_IDLE_ERR_COUNT_TIMEOUT_100 100 /* Extended Status Register */ -#define IEEE_ESR_1000T_HD_CAPS 0x1000 /* 1000T HD capable */ -#define IEEE_ESR_1000T_FD_CAPS 0x2000 /* 1000T FD capable */ -#define IEEE_ESR_1000X_HD_CAPS 0x4000 /* 1000X HD capable */ -#define IEEE_ESR_1000X_FD_CAPS 0x8000 /* 1000X FD capable */ +#define IEEE_ESR_1000T_HD_CAPS 0x1000 /* 1000T HD capable */ +#define IEEE_ESR_1000T_FD_CAPS 0x2000 /* 1000T FD capable */ +#define IEEE_ESR_1000X_HD_CAPS 0x4000 /* 1000X HD capable */ +#define IEEE_ESR_1000X_FD_CAPS 0x8000 /* 1000X FD capable */ -#define PHY_TX_POLARITY_MASK 0x0100 /* register 10h bit 8 (polarity bit) */ -#define PHY_TX_NORMAL_POLARITY 0 /* register 10h bit 8 (normal polarity) */ +#define PHY_TX_POLARITY_MASK 0x0100 /* register 10h bit 8 (polarity bit) */ +#define PHY_TX_NORMAL_POLARITY 0 /* register 10h bit 8 (normal polarity) */ -#define AUTO_POLARITY_DISABLE 0x0010 /* register 11h bit 4 */ - /* (0=enable, 1=disable) */ +#define AUTO_POLARITY_DISABLE 0x0010 /* register 11h bit 4 */ + /* (0=enable, 1=disable) */ /* M88E1000 PHY Specific Control Register */ -#define M88E1000_PSCR_JABBER_DISABLE 0x0001 /* 1=Jabber Function disabled */ -#define M88E1000_PSCR_POLARITY_REVERSAL 0x0002 /* 1=Polarity Reversal enabled */ -#define M88E1000_PSCR_SQE_TEST 0x0004 /* 1=SQE Test enabled */ -#define M88E1000_PSCR_CLK125_DISABLE 0x0010 /* 1=CLK125 low, - * 0=CLK125 toggling - */ -#define M88E1000_PSCR_MDI_MANUAL_MODE 0x0000 /* MDI Crossover Mode bits 6:5 */ - /* Manual MDI configuration */ -#define M88E1000_PSCR_MDIX_MANUAL_MODE 0x0020 /* Manual MDIX configuration */ -#define M88E1000_PSCR_AUTO_X_1000T 0x0040 /* 1000BASE-T: Auto crossover, - * 100BASE-TX/10BASE-T: - * MDI Mode - */ -#define M88E1000_PSCR_AUTO_X_MODE 0x0060 /* Auto crossover enabled - * all speeds. - */ +#define M88E1000_PSCR_JABBER_DISABLE 0x0001 /* 1=Jabber Function disabled */ +#define M88E1000_PSCR_POLARITY_REVERSAL 0x0002 /* 1=Polarity Reversal enabled */ +#define M88E1000_PSCR_SQE_TEST 0x0004 /* 1=SQE Test enabled */ +#define M88E1000_PSCR_CLK125_DISABLE 0x0010 /* 1=CLK125 low, + * 0=CLK125 toggling + */ +#define M88E1000_PSCR_MDI_MANUAL_MODE 0x0000 /* MDI Crossover Mode bits 6:5 */ + /* Manual MDI configuration */ +#define M88E1000_PSCR_MDIX_MANUAL_MODE 0x0020 /* Manual MDIX configuration */ +#define M88E1000_PSCR_AUTO_X_1000T 0x0040 /* 1000BASE-T: Auto crossover, + * 100BASE-TX/10BASE-T: + * MDI Mode + */ +#define M88E1000_PSCR_AUTO_X_MODE 0x0060 /* Auto crossover enabled + * all speeds. + */ #define M88E1000_PSCR_10BT_EXT_DIST_ENABLE 0x0080 - /* 1=Enable Extended 10BASE-T distance - * (Lower 10BASE-T RX Threshold) - * 0=Normal 10BASE-T RX Threshold */ + /* 1=Enable Extended 10BASE-T distance + * (Lower 10BASE-T RX Threshold) + * 0=Normal 10BASE-T RX Threshold */ #define M88E1000_PSCR_MII_5BIT_ENABLE 0x0100 - /* 1=5-Bit interface in 100BASE-TX - * 0=MII interface in 100BASE-TX */ -#define M88E1000_PSCR_SCRAMBLER_DISABLE 0x0200 /* 1=Scrambler disable */ -#define M88E1000_PSCR_FORCE_LINK_GOOD 0x0400 /* 1=Force link good */ -#define M88E1000_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on Transmit */ + /* 1=5-Bit interface in 100BASE-TX + * 0=MII interface in 100BASE-TX */ +#define M88E1000_PSCR_SCRAMBLER_DISABLE 0x0200 /* 1=Scrambler disable */ +#define M88E1000_PSCR_FORCE_LINK_GOOD 0x0400 /* 1=Force link good */ +#define M88E1000_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on Transmit */ #define M88E1000_PSCR_POLARITY_REVERSAL_SHIFT 1 #define M88E1000_PSCR_AUTO_X_MODE_SHIFT 5 #define M88E1000_PSCR_10BT_EXT_DIST_ENABLE_SHIFT 7 /* M88E1000 PHY Specific Status Register */ -#define M88E1000_PSSR_JABBER 0x0001 /* 1=Jabber */ -#define M88E1000_PSSR_REV_POLARITY 0x0002 /* 1=Polarity reversed */ -#define M88E1000_PSSR_DOWNSHIFT 0x0020 /* 1=Downshifted */ -#define M88E1000_PSSR_MDIX 0x0040 /* 1=MDIX; 0=MDI */ -#define M88E1000_PSSR_CABLE_LENGTH 0x0380 /* 0=<50M;1=50-80M;2=80-110M; - * 3=110-140M;4=>140M */ -#define M88E1000_PSSR_LINK 0x0400 /* 1=Link up, 0=Link down */ -#define M88E1000_PSSR_SPD_DPLX_RESOLVED 0x0800 /* 1=Speed & Duplex resolved */ -#define M88E1000_PSSR_PAGE_RCVD 0x1000 /* 1=Page received */ -#define M88E1000_PSSR_DPLX 0x2000 /* 1=Duplex 0=Half Duplex */ -#define M88E1000_PSSR_SPEED 0xC000 /* Speed, bits 14:15 */ -#define M88E1000_PSSR_10MBS 0x0000 /* 00=10Mbs */ -#define M88E1000_PSSR_100MBS 0x4000 /* 01=100Mbs */ -#define M88E1000_PSSR_1000MBS 0x8000 /* 10=1000Mbs */ +#define M88E1000_PSSR_JABBER 0x0001 /* 1=Jabber */ +#define M88E1000_PSSR_REV_POLARITY 0x0002 /* 1=Polarity reversed */ +#define M88E1000_PSSR_DOWNSHIFT 0x0020 /* 1=Downshifted */ +#define M88E1000_PSSR_MDIX 0x0040 /* 1=MDIX; 0=MDI */ +#define M88E1000_PSSR_CABLE_LENGTH 0x0380 /* 0=<50M;1=50-80M;2=80-110M; + * 3=110-140M;4=>140M */ +#define M88E1000_PSSR_LINK 0x0400 /* 1=Link up, 0=Link down */ +#define M88E1000_PSSR_SPD_DPLX_RESOLVED 0x0800 /* 1=Speed & Duplex resolved */ +#define M88E1000_PSSR_PAGE_RCVD 0x1000 /* 1=Page received */ +#define M88E1000_PSSR_DPLX 0x2000 /* 1=Duplex 0=Half Duplex */ +#define M88E1000_PSSR_SPEED 0xC000 /* Speed, bits 14:15 */ +#define M88E1000_PSSR_10MBS 0x0000 /* 00=10Mbs */ +#define M88E1000_PSSR_100MBS 0x4000 /* 01=100Mbs */ +#define M88E1000_PSSR_1000MBS 0x8000 /* 10=1000Mbs */ #define M88E1000_PSSR_REV_POLARITY_SHIFT 1 #define M88E1000_PSSR_DOWNSHIFT_SHIFT 5 @@ -2894,12 +2717,12 @@ struct e1000_host_command_info { #define M88E1000_PSSR_CABLE_LENGTH_SHIFT 7 /* M88E1000 Extended PHY Specific Control Register */ -#define M88E1000_EPSCR_FIBER_LOOPBACK 0x4000 /* 1=Fiber loopback */ -#define M88E1000_EPSCR_DOWN_NO_IDLE 0x8000 /* 1=Lost lock detect enabled. - * Will assert lost lock and bring - * link down if idle not seen - * within 1ms in 1000BASE-T - */ +#define M88E1000_EPSCR_FIBER_LOOPBACK 0x4000 /* 1=Fiber loopback */ +#define M88E1000_EPSCR_DOWN_NO_IDLE 0x8000 /* 1=Lost lock detect enabled. + * Will assert lost lock and bring + * link down if idle not seen + * within 1ms in 1000BASE-T + */ /* Number of times we will attempt to autonegotiate before downshifting if we * are the master */ #define M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK 0x0C00 @@ -2914,9 +2737,9 @@ struct e1000_host_command_info { #define M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X 0x0100 #define M88E1000_EPSCR_SLAVE_DOWNSHIFT_2X 0x0200 #define M88E1000_EPSCR_SLAVE_DOWNSHIFT_3X 0x0300 -#define M88E1000_EPSCR_TX_CLK_2_5 0x0060 /* 2.5 MHz TX_CLK */ -#define M88E1000_EPSCR_TX_CLK_25 0x0070 /* 25 MHz TX_CLK */ -#define M88E1000_EPSCR_TX_CLK_0 0x0000 /* NO TX_CLK */ +#define M88E1000_EPSCR_TX_CLK_2_5 0x0060 /* 2.5 MHz TX_CLK */ +#define M88E1000_EPSCR_TX_CLK_25 0x0070 /* 25 MHz TX_CLK */ +#define M88E1000_EPSCR_TX_CLK_0 0x0000 /* NO TX_CLK */ /* M88EC018 Rev 2 specific DownShift settings */ #define M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK 0x0E00 @@ -2938,18 +2761,18 @@ struct e1000_host_command_info { #define IGP01E1000_PSCFR_DISABLE_TRANSMIT 0x2000 /* IGP01E1000 Specific Port Status Register - R/O */ -#define IGP01E1000_PSSR_AUTONEG_FAILED 0x0001 /* RO LH SC */ +#define IGP01E1000_PSSR_AUTONEG_FAILED 0x0001 /* RO LH SC */ #define IGP01E1000_PSSR_POLARITY_REVERSED 0x0002 #define IGP01E1000_PSSR_CABLE_LENGTH 0x007C #define IGP01E1000_PSSR_FULL_DUPLEX 0x0200 #define IGP01E1000_PSSR_LINK_UP 0x0400 #define IGP01E1000_PSSR_MDIX 0x0800 -#define IGP01E1000_PSSR_SPEED_MASK 0xC000 /* speed bits mask */ +#define IGP01E1000_PSSR_SPEED_MASK 0xC000 /* speed bits mask */ #define IGP01E1000_PSSR_SPEED_10MBPS 0x4000 #define IGP01E1000_PSSR_SPEED_100MBPS 0x8000 #define IGP01E1000_PSSR_SPEED_1000MBPS 0xC000 -#define IGP01E1000_PSSR_CABLE_LENGTH_SHIFT 0x0002 /* shift right 2 */ -#define IGP01E1000_PSSR_MDIX_SHIFT 0x000B /* shift right 11 */ +#define IGP01E1000_PSSR_CABLE_LENGTH_SHIFT 0x0002 /* shift right 2 */ +#define IGP01E1000_PSSR_MDIX_SHIFT 0x000B /* shift right 11 */ /* IGP01E1000 Specific Port Control Register - R/W */ #define IGP01E1000_PSCR_TP_LOOPBACK 0x0010 @@ -2957,16 +2780,16 @@ struct e1000_host_command_info { #define IGP01E1000_PSCR_TEN_CRS_SELECT 0x0400 #define IGP01E1000_PSCR_FLIP_CHIP 0x0800 #define IGP01E1000_PSCR_AUTO_MDIX 0x1000 -#define IGP01E1000_PSCR_FORCE_MDI_MDIX 0x2000 /* 0-MDI, 1-MDIX */ +#define IGP01E1000_PSCR_FORCE_MDI_MDIX 0x2000 /* 0-MDI, 1-MDIX */ /* IGP01E1000 Specific Port Link Health Register */ #define IGP01E1000_PLHR_SS_DOWNGRADE 0x8000 #define IGP01E1000_PLHR_GIG_SCRAMBLER_ERROR 0x4000 #define IGP01E1000_PLHR_MASTER_FAULT 0x2000 #define IGP01E1000_PLHR_MASTER_RESOLUTION 0x1000 -#define IGP01E1000_PLHR_GIG_REM_RCVR_NOK 0x0800 /* LH */ -#define IGP01E1000_PLHR_IDLE_ERROR_CNT_OFLOW 0x0400 /* LH */ -#define IGP01E1000_PLHR_DATA_ERR_1 0x0200 /* LH */ +#define IGP01E1000_PLHR_GIG_REM_RCVR_NOK 0x0800 /* LH */ +#define IGP01E1000_PLHR_IDLE_ERROR_CNT_OFLOW 0x0400 /* LH */ +#define IGP01E1000_PLHR_DATA_ERR_1 0x0200 /* LH */ #define IGP01E1000_PLHR_DATA_ERR_0 0x0100 #define IGP01E1000_PLHR_AUTONEG_FAULT 0x0040 #define IGP01E1000_PLHR_AUTONEG_ACTIVE 0x0010 @@ -2981,9 +2804,9 @@ struct e1000_host_command_info { #define IGP01E1000_MSE_CHANNEL_B 0x0F00 #define IGP01E1000_MSE_CHANNEL_A 0xF000 -#define IGP02E1000_PM_SPD 0x0001 /* Smart Power Down */ -#define IGP02E1000_PM_D3_LPLU 0x0004 /* Enable LPLU in non-D0a modes */ -#define IGP02E1000_PM_D0_LPLU 0x0002 /* Enable LPLU in D0a mode */ +#define IGP02E1000_PM_SPD 0x0001 /* Smart Power Down */ +#define IGP02E1000_PM_D3_LPLU 0x0004 /* Enable LPLU in non-D0a modes */ +#define IGP02E1000_PM_D0_LPLU 0x0002 /* Enable LPLU in D0a mode */ /* IGP01E1000 DSP reset macros */ #define DSP_RESET_ENABLE 0x0 @@ -2992,8 +2815,8 @@ struct e1000_host_command_info { /* IGP01E1000 & IGP02E1000 AGC Registers */ -#define IGP01E1000_AGC_LENGTH_SHIFT 7 /* Coarse - 13:11, Fine - 10:7 */ -#define IGP02E1000_AGC_LENGTH_SHIFT 9 /* Coarse - 15:13, Fine - 12:9 */ +#define IGP01E1000_AGC_LENGTH_SHIFT 7 /* Coarse - 13:11, Fine - 10:7 */ +#define IGP02E1000_AGC_LENGTH_SHIFT 9 /* Coarse - 15:13, Fine - 12:9 */ /* IGP02E1000 AGC Register Length 9-bit mask */ #define IGP02E1000_AGC_LENGTH_MASK 0x7F @@ -3011,9 +2834,9 @@ struct e1000_host_command_info { #define IGP01E1000_PHY_POLARITY_MASK 0x0078 /* IGP01E1000 GMII FIFO Register */ -#define IGP01E1000_GMII_FLEX_SPD 0x10 /* Enable flexible speed - * on Link-Up */ -#define IGP01E1000_GMII_SPD 0x20 /* Enable SPD */ +#define IGP01E1000_GMII_FLEX_SPD 0x10 /* Enable flexible speed + * on Link-Up */ +#define IGP01E1000_GMII_SPD 0x20 /* Enable SPD */ /* IGP01E1000 Analog Register */ #define IGP01E1000_ANALOG_SPARE_FUSE_STATUS 0x20D1 @@ -3032,114 +2855,6 @@ struct e1000_host_command_info { #define IGP01E1000_ANALOG_FUSE_FINE_1 0x0080 #define IGP01E1000_ANALOG_FUSE_FINE_10 0x0500 -/* GG82563 PHY Specific Status Register (Page 0, Register 16 */ -#define GG82563_PSCR_DISABLE_JABBER 0x0001 /* 1=Disable Jabber */ -#define GG82563_PSCR_POLARITY_REVERSAL_DISABLE 0x0002 /* 1=Polarity Reversal Disabled */ -#define GG82563_PSCR_POWER_DOWN 0x0004 /* 1=Power Down */ -#define GG82563_PSCR_COPPER_TRANSMITER_DISABLE 0x0008 /* 1=Transmitter Disabled */ -#define GG82563_PSCR_CROSSOVER_MODE_MASK 0x0060 -#define GG82563_PSCR_CROSSOVER_MODE_MDI 0x0000 /* 00=Manual MDI configuration */ -#define GG82563_PSCR_CROSSOVER_MODE_MDIX 0x0020 /* 01=Manual MDIX configuration */ -#define GG82563_PSCR_CROSSOVER_MODE_AUTO 0x0060 /* 11=Automatic crossover */ -#define GG82563_PSCR_ENALBE_EXTENDED_DISTANCE 0x0080 /* 1=Enable Extended Distance */ -#define GG82563_PSCR_ENERGY_DETECT_MASK 0x0300 -#define GG82563_PSCR_ENERGY_DETECT_OFF 0x0000 /* 00,01=Off */ -#define GG82563_PSCR_ENERGY_DETECT_RX 0x0200 /* 10=Sense on Rx only (Energy Detect) */ -#define GG82563_PSCR_ENERGY_DETECT_RX_TM 0x0300 /* 11=Sense and Tx NLP */ -#define GG82563_PSCR_FORCE_LINK_GOOD 0x0400 /* 1=Force Link Good */ -#define GG82563_PSCR_DOWNSHIFT_ENABLE 0x0800 /* 1=Enable Downshift */ -#define GG82563_PSCR_DOWNSHIFT_COUNTER_MASK 0x7000 -#define GG82563_PSCR_DOWNSHIFT_COUNTER_SHIFT 12 - -/* PHY Specific Status Register (Page 0, Register 17) */ -#define GG82563_PSSR_JABBER 0x0001 /* 1=Jabber */ -#define GG82563_PSSR_POLARITY 0x0002 /* 1=Polarity Reversed */ -#define GG82563_PSSR_LINK 0x0008 /* 1=Link is Up */ -#define GG82563_PSSR_ENERGY_DETECT 0x0010 /* 1=Sleep, 0=Active */ -#define GG82563_PSSR_DOWNSHIFT 0x0020 /* 1=Downshift */ -#define GG82563_PSSR_CROSSOVER_STATUS 0x0040 /* 1=MDIX, 0=MDI */ -#define GG82563_PSSR_RX_PAUSE_ENABLED 0x0100 /* 1=Receive Pause Enabled */ -#define GG82563_PSSR_TX_PAUSE_ENABLED 0x0200 /* 1=Transmit Pause Enabled */ -#define GG82563_PSSR_LINK_UP 0x0400 /* 1=Link Up */ -#define GG82563_PSSR_SPEED_DUPLEX_RESOLVED 0x0800 /* 1=Resolved */ -#define GG82563_PSSR_PAGE_RECEIVED 0x1000 /* 1=Page Received */ -#define GG82563_PSSR_DUPLEX 0x2000 /* 1-Full-Duplex */ -#define GG82563_PSSR_SPEED_MASK 0xC000 -#define GG82563_PSSR_SPEED_10MBPS 0x0000 /* 00=10Mbps */ -#define GG82563_PSSR_SPEED_100MBPS 0x4000 /* 01=100Mbps */ -#define GG82563_PSSR_SPEED_1000MBPS 0x8000 /* 10=1000Mbps */ - -/* PHY Specific Status Register 2 (Page 0, Register 19) */ -#define GG82563_PSSR2_JABBER 0x0001 /* 1=Jabber */ -#define GG82563_PSSR2_POLARITY_CHANGED 0x0002 /* 1=Polarity Changed */ -#define GG82563_PSSR2_ENERGY_DETECT_CHANGED 0x0010 /* 1=Energy Detect Changed */ -#define GG82563_PSSR2_DOWNSHIFT_INTERRUPT 0x0020 /* 1=Downshift Detected */ -#define GG82563_PSSR2_MDI_CROSSOVER_CHANGE 0x0040 /* 1=Crossover Changed */ -#define GG82563_PSSR2_FALSE_CARRIER 0x0100 /* 1=False Carrier */ -#define GG82563_PSSR2_SYMBOL_ERROR 0x0200 /* 1=Symbol Error */ -#define GG82563_PSSR2_LINK_STATUS_CHANGED 0x0400 /* 1=Link Status Changed */ -#define GG82563_PSSR2_AUTO_NEG_COMPLETED 0x0800 /* 1=Auto-Neg Completed */ -#define GG82563_PSSR2_PAGE_RECEIVED 0x1000 /* 1=Page Received */ -#define GG82563_PSSR2_DUPLEX_CHANGED 0x2000 /* 1=Duplex Changed */ -#define GG82563_PSSR2_SPEED_CHANGED 0x4000 /* 1=Speed Changed */ -#define GG82563_PSSR2_AUTO_NEG_ERROR 0x8000 /* 1=Auto-Neg Error */ - -/* PHY Specific Control Register 2 (Page 0, Register 26) */ -#define GG82563_PSCR2_10BT_POLARITY_FORCE 0x0002 /* 1=Force Negative Polarity */ -#define GG82563_PSCR2_1000MB_TEST_SELECT_MASK 0x000C -#define GG82563_PSCR2_1000MB_TEST_SELECT_NORMAL 0x0000 /* 00,01=Normal Operation */ -#define GG82563_PSCR2_1000MB_TEST_SELECT_112NS 0x0008 /* 10=Select 112ns Sequence */ -#define GG82563_PSCR2_1000MB_TEST_SELECT_16NS 0x000C /* 11=Select 16ns Sequence */ -#define GG82563_PSCR2_REVERSE_AUTO_NEG 0x2000 /* 1=Reverse Auto-Negotiation */ -#define GG82563_PSCR2_1000BT_DISABLE 0x4000 /* 1=Disable 1000BASE-T */ -#define GG82563_PSCR2_TRANSMITER_TYPE_MASK 0x8000 -#define GG82563_PSCR2_TRANSMITTER_TYPE_CLASS_B 0x0000 /* 0=Class B */ -#define GG82563_PSCR2_TRANSMITTER_TYPE_CLASS_A 0x8000 /* 1=Class A */ - -/* MAC Specific Control Register (Page 2, Register 21) */ -/* Tx clock speed for Link Down and 1000BASE-T for the following speeds */ -#define GG82563_MSCR_TX_CLK_MASK 0x0007 -#define GG82563_MSCR_TX_CLK_10MBPS_2_5MHZ 0x0004 -#define GG82563_MSCR_TX_CLK_100MBPS_25MHZ 0x0005 -#define GG82563_MSCR_TX_CLK_1000MBPS_2_5MHZ 0x0006 -#define GG82563_MSCR_TX_CLK_1000MBPS_25MHZ 0x0007 - -#define GG82563_MSCR_ASSERT_CRS_ON_TX 0x0010 /* 1=Assert */ - -/* DSP Distance Register (Page 5, Register 26) */ -#define GG82563_DSPD_CABLE_LENGTH 0x0007 /* 0 = <50M; - 1 = 50-80M; - 2 = 80-110M; - 3 = 110-140M; - 4 = >140M */ - -/* Kumeran Mode Control Register (Page 193, Register 16) */ -#define GG82563_KMCR_PHY_LEDS_EN 0x0020 /* 1=PHY LEDs, 0=Kumeran Inband LEDs */ -#define GG82563_KMCR_FORCE_LINK_UP 0x0040 /* 1=Force Link Up */ -#define GG82563_KMCR_SUPPRESS_SGMII_EPD_EXT 0x0080 -#define GG82563_KMCR_MDIO_BUS_SPEED_SELECT_MASK 0x0400 -#define GG82563_KMCR_MDIO_BUS_SPEED_SELECT 0x0400 /* 1=6.25MHz, 0=0.8MHz */ -#define GG82563_KMCR_PASS_FALSE_CARRIER 0x0800 - -/* Power Management Control Register (Page 193, Register 20) */ -#define GG82563_PMCR_ENABLE_ELECTRICAL_IDLE 0x0001 /* 1=Enalbe SERDES Electrical Idle */ -#define GG82563_PMCR_DISABLE_PORT 0x0002 /* 1=Disable Port */ -#define GG82563_PMCR_DISABLE_SERDES 0x0004 /* 1=Disable SERDES */ -#define GG82563_PMCR_REVERSE_AUTO_NEG 0x0008 /* 1=Enable Reverse Auto-Negotiation */ -#define GG82563_PMCR_DISABLE_1000_NON_D0 0x0010 /* 1=Disable 1000Mbps Auto-Neg in non D0 */ -#define GG82563_PMCR_DISABLE_1000 0x0020 /* 1=Disable 1000Mbps Auto-Neg Always */ -#define GG82563_PMCR_REVERSE_AUTO_NEG_D0A 0x0040 /* 1=Enable D0a Reverse Auto-Negotiation */ -#define GG82563_PMCR_FORCE_POWER_STATE 0x0080 /* 1=Force Power State */ -#define GG82563_PMCR_PROGRAMMED_POWER_STATE_MASK 0x0300 -#define GG82563_PMCR_PROGRAMMED_POWER_STATE_DR 0x0000 /* 00=Dr */ -#define GG82563_PMCR_PROGRAMMED_POWER_STATE_D0U 0x0100 /* 01=D0u */ -#define GG82563_PMCR_PROGRAMMED_POWER_STATE_D0A 0x0200 /* 10=D0a */ -#define GG82563_PMCR_PROGRAMMED_POWER_STATE_D3 0x0300 /* 11=D3 */ - -/* In-Band Control Register (Page 194, Register 18) */ -#define GG82563_ICR_DIS_PADDING 0x0010 /* Disable Padding Use */ - - /* Bit definitions for valid PHY IDs. */ /* I = Integrated * E = External @@ -3154,8 +2869,6 @@ struct e1000_host_command_info { #define M88E1011_I_REV_4 0x04 #define M88E1111_I_PHY_ID 0x01410CC0 #define L1LXT971A_PHY_ID 0x001378E0 -#define GG82563_E_PHY_ID 0x01410CA0 - /* Bits... * 15-5: page @@ -3166,41 +2879,41 @@ struct e1000_host_command_info { (((page) << PHY_PAGE_SHIFT) | ((reg) & MAX_PHY_REG_ADDRESS)) #define IGP3_PHY_PORT_CTRL \ - PHY_REG(769, 17) /* Port General Configuration */ + PHY_REG(769, 17) /* Port General Configuration */ #define IGP3_PHY_RATE_ADAPT_CTRL \ - PHY_REG(769, 25) /* Rate Adapter Control Register */ + PHY_REG(769, 25) /* Rate Adapter Control Register */ #define IGP3_KMRN_FIFO_CTRL_STATS \ - PHY_REG(770, 16) /* KMRN FIFO's control/status register */ + PHY_REG(770, 16) /* KMRN FIFO's control/status register */ #define IGP3_KMRN_POWER_MNG_CTRL \ - PHY_REG(770, 17) /* KMRN Power Management Control Register */ + PHY_REG(770, 17) /* KMRN Power Management Control Register */ #define IGP3_KMRN_INBAND_CTRL \ - PHY_REG(770, 18) /* KMRN Inband Control Register */ + PHY_REG(770, 18) /* KMRN Inband Control Register */ #define IGP3_KMRN_DIAG \ - PHY_REG(770, 19) /* KMRN Diagnostic register */ -#define IGP3_KMRN_DIAG_PCS_LOCK_LOSS 0x0002 /* RX PCS is not synced */ + PHY_REG(770, 19) /* KMRN Diagnostic register */ +#define IGP3_KMRN_DIAG_PCS_LOCK_LOSS 0x0002 /* RX PCS is not synced */ #define IGP3_KMRN_ACK_TIMEOUT \ - PHY_REG(770, 20) /* KMRN Acknowledge Timeouts register */ + PHY_REG(770, 20) /* KMRN Acknowledge Timeouts register */ #define IGP3_VR_CTRL \ - PHY_REG(776, 18) /* Voltage regulator control register */ -#define IGP3_VR_CTRL_MODE_SHUT 0x0200 /* Enter powerdown, shutdown VRs */ -#define IGP3_VR_CTRL_MODE_MASK 0x0300 /* Shutdown VR Mask */ + PHY_REG(776, 18) /* Voltage regulator control register */ +#define IGP3_VR_CTRL_MODE_SHUT 0x0200 /* Enter powerdown, shutdown VRs */ +#define IGP3_VR_CTRL_MODE_MASK 0x0300 /* Shutdown VR Mask */ #define IGP3_CAPABILITY \ - PHY_REG(776, 19) /* IGP3 Capability Register */ + PHY_REG(776, 19) /* IGP3 Capability Register */ /* Capabilities for SKU Control */ -#define IGP3_CAP_INITIATE_TEAM 0x0001 /* Able to initiate a team */ -#define IGP3_CAP_WFM 0x0002 /* Support WoL and PXE */ -#define IGP3_CAP_ASF 0x0004 /* Support ASF */ -#define IGP3_CAP_LPLU 0x0008 /* Support Low Power Link Up */ -#define IGP3_CAP_DC_AUTO_SPEED 0x0010 /* Support AC/DC Auto Link Speed */ -#define IGP3_CAP_SPD 0x0020 /* Support Smart Power Down */ -#define IGP3_CAP_MULT_QUEUE 0x0040 /* Support 2 tx & 2 rx queues */ -#define IGP3_CAP_RSS 0x0080 /* Support RSS */ -#define IGP3_CAP_8021PQ 0x0100 /* Support 802.1Q & 802.1p */ -#define IGP3_CAP_AMT_CB 0x0200 /* Support active manageability and circuit breaker */ +#define IGP3_CAP_INITIATE_TEAM 0x0001 /* Able to initiate a team */ +#define IGP3_CAP_WFM 0x0002 /* Support WoL and PXE */ +#define IGP3_CAP_ASF 0x0004 /* Support ASF */ +#define IGP3_CAP_LPLU 0x0008 /* Support Low Power Link Up */ +#define IGP3_CAP_DC_AUTO_SPEED 0x0010 /* Support AC/DC Auto Link Speed */ +#define IGP3_CAP_SPD 0x0020 /* Support Smart Power Down */ +#define IGP3_CAP_MULT_QUEUE 0x0040 /* Support 2 tx & 2 rx queues */ +#define IGP3_CAP_RSS 0x0080 /* Support RSS */ +#define IGP3_CAP_8021PQ 0x0100 /* Support 802.1Q & 802.1p */ +#define IGP3_CAP_AMT_CB 0x0200 /* Support active manageability and circuit breaker */ #define IGP3_PPC_JORDAN_EN 0x0001 #define IGP3_PPC_JORDAN_GIGA_SPEED 0x0002 @@ -3210,69 +2923,69 @@ struct e1000_host_command_info { #define IGP3_KMRN_PMC_K0S_MODE1_EN_GIGA 0x0020 #define IGP3_KMRN_PMC_K0S_MODE1_EN_100 0x0040 -#define IGP3E1000_PHY_MISC_CTRL 0x1B /* Misc. Ctrl register */ -#define IGP3_PHY_MISC_DUPLEX_MANUAL_SET 0x1000 /* Duplex Manual Set */ +#define IGP3E1000_PHY_MISC_CTRL 0x1B /* Misc. Ctrl register */ +#define IGP3_PHY_MISC_DUPLEX_MANUAL_SET 0x1000 /* Duplex Manual Set */ #define IGP3_KMRN_EXT_CTRL PHY_REG(770, 18) #define IGP3_KMRN_EC_DIS_INBAND 0x0080 #define IGP03E1000_E_PHY_ID 0x02A80390 -#define IFE_E_PHY_ID 0x02A80330 /* 10/100 PHY */ +#define IFE_E_PHY_ID 0x02A80330 /* 10/100 PHY */ #define IFE_PLUS_E_PHY_ID 0x02A80320 #define IFE_C_E_PHY_ID 0x02A80310 -#define IFE_PHY_EXTENDED_STATUS_CONTROL 0x10 /* 100BaseTx Extended Status, Control and Address */ -#define IFE_PHY_SPECIAL_CONTROL 0x11 /* 100BaseTx PHY special control register */ -#define IFE_PHY_RCV_FALSE_CARRIER 0x13 /* 100BaseTx Receive False Carrier Counter */ -#define IFE_PHY_RCV_DISCONNECT 0x14 /* 100BaseTx Receive Disconnet Counter */ -#define IFE_PHY_RCV_ERROT_FRAME 0x15 /* 100BaseTx Receive Error Frame Counter */ -#define IFE_PHY_RCV_SYMBOL_ERR 0x16 /* Receive Symbol Error Counter */ -#define IFE_PHY_PREM_EOF_ERR 0x17 /* 100BaseTx Receive Premature End Of Frame Error Counter */ -#define IFE_PHY_RCV_EOF_ERR 0x18 /* 10BaseT Receive End Of Frame Error Counter */ -#define IFE_PHY_TX_JABBER_DETECT 0x19 /* 10BaseT Transmit Jabber Detect Counter */ -#define IFE_PHY_EQUALIZER 0x1A /* PHY Equalizer Control and Status */ -#define IFE_PHY_SPECIAL_CONTROL_LED 0x1B /* PHY special control and LED configuration */ -#define IFE_PHY_MDIX_CONTROL 0x1C /* MDI/MDI-X Control register */ -#define IFE_PHY_HWI_CONTROL 0x1D /* Hardware Integrity Control (HWI) */ - -#define IFE_PESC_REDUCED_POWER_DOWN_DISABLE 0x2000 /* Defaut 1 = Disable auto reduced power down */ -#define IFE_PESC_100BTX_POWER_DOWN 0x0400 /* Indicates the power state of 100BASE-TX */ -#define IFE_PESC_10BTX_POWER_DOWN 0x0200 /* Indicates the power state of 10BASE-T */ -#define IFE_PESC_POLARITY_REVERSED 0x0100 /* Indicates 10BASE-T polarity */ -#define IFE_PESC_PHY_ADDR_MASK 0x007C /* Bit 6:2 for sampled PHY address */ -#define IFE_PESC_SPEED 0x0002 /* Auto-negotiation speed result 1=100Mbs, 0=10Mbs */ -#define IFE_PESC_DUPLEX 0x0001 /* Auto-negotiation duplex result 1=Full, 0=Half */ +#define IFE_PHY_EXTENDED_STATUS_CONTROL 0x10 /* 100BaseTx Extended Status, Control and Address */ +#define IFE_PHY_SPECIAL_CONTROL 0x11 /* 100BaseTx PHY special control register */ +#define IFE_PHY_RCV_FALSE_CARRIER 0x13 /* 100BaseTx Receive False Carrier Counter */ +#define IFE_PHY_RCV_DISCONNECT 0x14 /* 100BaseTx Receive Disconnect Counter */ +#define IFE_PHY_RCV_ERROT_FRAME 0x15 /* 100BaseTx Receive Error Frame Counter */ +#define IFE_PHY_RCV_SYMBOL_ERR 0x16 /* Receive Symbol Error Counter */ +#define IFE_PHY_PREM_EOF_ERR 0x17 /* 100BaseTx Receive Premature End Of Frame Error Counter */ +#define IFE_PHY_RCV_EOF_ERR 0x18 /* 10BaseT Receive End Of Frame Error Counter */ +#define IFE_PHY_TX_JABBER_DETECT 0x19 /* 10BaseT Transmit Jabber Detect Counter */ +#define IFE_PHY_EQUALIZER 0x1A /* PHY Equalizer Control and Status */ +#define IFE_PHY_SPECIAL_CONTROL_LED 0x1B /* PHY special control and LED configuration */ +#define IFE_PHY_MDIX_CONTROL 0x1C /* MDI/MDI-X Control register */ +#define IFE_PHY_HWI_CONTROL 0x1D /* Hardware Integrity Control (HWI) */ + +#define IFE_PESC_REDUCED_POWER_DOWN_DISABLE 0x2000 /* Default 1 = Disable auto reduced power down */ +#define IFE_PESC_100BTX_POWER_DOWN 0x0400 /* Indicates the power state of 100BASE-TX */ +#define IFE_PESC_10BTX_POWER_DOWN 0x0200 /* Indicates the power state of 10BASE-T */ +#define IFE_PESC_POLARITY_REVERSED 0x0100 /* Indicates 10BASE-T polarity */ +#define IFE_PESC_PHY_ADDR_MASK 0x007C /* Bit 6:2 for sampled PHY address */ +#define IFE_PESC_SPEED 0x0002 /* Auto-negotiation speed result 1=100Mbs, 0=10Mbs */ +#define IFE_PESC_DUPLEX 0x0001 /* Auto-negotiation duplex result 1=Full, 0=Half */ #define IFE_PESC_POLARITY_REVERSED_SHIFT 8 -#define IFE_PSC_DISABLE_DYNAMIC_POWER_DOWN 0x0100 /* 1 = Dyanmic Power Down disabled */ -#define IFE_PSC_FORCE_POLARITY 0x0020 /* 1=Reversed Polarity, 0=Normal */ -#define IFE_PSC_AUTO_POLARITY_DISABLE 0x0010 /* 1=Auto Polarity Disabled, 0=Enabled */ -#define IFE_PSC_JABBER_FUNC_DISABLE 0x0001 /* 1=Jabber Disabled, 0=Normal Jabber Operation */ +#define IFE_PSC_DISABLE_DYNAMIC_POWER_DOWN 0x0100 /* 1 = Dynamic Power Down disabled */ +#define IFE_PSC_FORCE_POLARITY 0x0020 /* 1=Reversed Polarity, 0=Normal */ +#define IFE_PSC_AUTO_POLARITY_DISABLE 0x0010 /* 1=Auto Polarity Disabled, 0=Enabled */ +#define IFE_PSC_JABBER_FUNC_DISABLE 0x0001 /* 1=Jabber Disabled, 0=Normal Jabber Operation */ #define IFE_PSC_FORCE_POLARITY_SHIFT 5 #define IFE_PSC_AUTO_POLARITY_DISABLE_SHIFT 4 -#define IFE_PMC_AUTO_MDIX 0x0080 /* 1=enable MDI/MDI-X feature, default 0=disabled */ -#define IFE_PMC_FORCE_MDIX 0x0040 /* 1=force MDIX-X, 0=force MDI */ -#define IFE_PMC_MDIX_STATUS 0x0020 /* 1=MDI-X, 0=MDI */ -#define IFE_PMC_AUTO_MDIX_COMPLETE 0x0010 /* Resolution algorithm is completed */ +#define IFE_PMC_AUTO_MDIX 0x0080 /* 1=enable MDI/MDI-X feature, default 0=disabled */ +#define IFE_PMC_FORCE_MDIX 0x0040 /* 1=force MDIX-X, 0=force MDI */ +#define IFE_PMC_MDIX_STATUS 0x0020 /* 1=MDI-X, 0=MDI */ +#define IFE_PMC_AUTO_MDIX_COMPLETE 0x0010 /* Resolution algorithm is completed */ #define IFE_PMC_MDIX_MODE_SHIFT 6 -#define IFE_PHC_MDIX_RESET_ALL_MASK 0x0000 /* Disable auto MDI-X */ - -#define IFE_PHC_HWI_ENABLE 0x8000 /* Enable the HWI feature */ -#define IFE_PHC_ABILITY_CHECK 0x4000 /* 1= Test Passed, 0=failed */ -#define IFE_PHC_TEST_EXEC 0x2000 /* PHY launch test pulses on the wire */ -#define IFE_PHC_HIGHZ 0x0200 /* 1 = Open Circuit */ -#define IFE_PHC_LOWZ 0x0400 /* 1 = Short Circuit */ -#define IFE_PHC_LOW_HIGH_Z_MASK 0x0600 /* Mask for indication type of problem on the line */ -#define IFE_PHC_DISTANCE_MASK 0x01FF /* Mask for distance to the cable problem, in 80cm granularity */ -#define IFE_PHC_RESET_ALL_MASK 0x0000 /* Disable HWI */ -#define IFE_PSCL_PROBE_MODE 0x0020 /* LED Probe mode */ -#define IFE_PSCL_PROBE_LEDS_OFF 0x0006 /* Force LEDs 0 and 2 off */ -#define IFE_PSCL_PROBE_LEDS_ON 0x0007 /* Force LEDs 0 and 2 on */ - -#define ICH_FLASH_COMMAND_TIMEOUT 5000 /* 5000 uSecs - adjusted */ -#define ICH_FLASH_ERASE_TIMEOUT 3000000 /* Up to 3 seconds - worst case */ -#define ICH_FLASH_CYCLE_REPEAT_COUNT 10 /* 10 cycles */ +#define IFE_PHC_MDIX_RESET_ALL_MASK 0x0000 /* Disable auto MDI-X */ + +#define IFE_PHC_HWI_ENABLE 0x8000 /* Enable the HWI feature */ +#define IFE_PHC_ABILITY_CHECK 0x4000 /* 1= Test Passed, 0=failed */ +#define IFE_PHC_TEST_EXEC 0x2000 /* PHY launch test pulses on the wire */ +#define IFE_PHC_HIGHZ 0x0200 /* 1 = Open Circuit */ +#define IFE_PHC_LOWZ 0x0400 /* 1 = Short Circuit */ +#define IFE_PHC_LOW_HIGH_Z_MASK 0x0600 /* Mask for indication type of problem on the line */ +#define IFE_PHC_DISTANCE_MASK 0x01FF /* Mask for distance to the cable problem, in 80cm granularity */ +#define IFE_PHC_RESET_ALL_MASK 0x0000 /* Disable HWI */ +#define IFE_PSCL_PROBE_MODE 0x0020 /* LED Probe mode */ +#define IFE_PSCL_PROBE_LEDS_OFF 0x0006 /* Force LEDs 0 and 2 off */ +#define IFE_PSCL_PROBE_LEDS_ON 0x0007 /* Force LEDs 0 and 2 on */ + +#define ICH_FLASH_COMMAND_TIMEOUT 5000 /* 5000 uSecs - adjusted */ +#define ICH_FLASH_ERASE_TIMEOUT 3000000 /* Up to 3 seconds - worst case */ +#define ICH_FLASH_CYCLE_REPEAT_COUNT 10 /* 10 cycles */ #define ICH_FLASH_SEG_SIZE_256 256 #define ICH_FLASH_SEG_SIZE_4K 4096 #define ICH_FLASH_SEG_SIZE_64K 65536 @@ -3305,74 +3018,6 @@ struct e1000_host_command_info { #define ICH_GFPREG_BASE_MASK 0x1FFF #define ICH_FLASH_LINEAR_ADDR_MASK 0x00FFFFFF -/* ICH8 GbE Flash Hardware Sequencing Flash Status Register bit breakdown */ -/* Offset 04h HSFSTS */ -union ich8_hws_flash_status { - struct ich8_hsfsts { -#ifdef __BIG_ENDIAN - u16 reserved2 :6; - u16 fldesvalid :1; - u16 flockdn :1; - u16 flcdone :1; - u16 flcerr :1; - u16 dael :1; - u16 berasesz :2; - u16 flcinprog :1; - u16 reserved1 :2; -#else - u16 flcdone :1; /* bit 0 Flash Cycle Done */ - u16 flcerr :1; /* bit 1 Flash Cycle Error */ - u16 dael :1; /* bit 2 Direct Access error Log */ - u16 berasesz :2; /* bit 4:3 Block/Sector Erase Size */ - u16 flcinprog :1; /* bit 5 flash SPI cycle in Progress */ - u16 reserved1 :2; /* bit 13:6 Reserved */ - u16 reserved2 :6; /* bit 13:6 Reserved */ - u16 fldesvalid :1; /* bit 14 Flash Descriptor Valid */ - u16 flockdn :1; /* bit 15 Flash Configuration Lock-Down */ -#endif - } hsf_status; - u16 regval; -}; - -/* ICH8 GbE Flash Hardware Sequencing Flash control Register bit breakdown */ -/* Offset 06h FLCTL */ -union ich8_hws_flash_ctrl { - struct ich8_hsflctl { -#ifdef __BIG_ENDIAN - u16 fldbcount :2; - u16 flockdn :6; - u16 flcgo :1; - u16 flcycle :2; - u16 reserved :5; -#else - u16 flcgo :1; /* 0 Flash Cycle Go */ - u16 flcycle :2; /* 2:1 Flash Cycle */ - u16 reserved :5; /* 7:3 Reserved */ - u16 fldbcount :2; /* 9:8 Flash Data Byte Count */ - u16 flockdn :6; /* 15:10 Reserved */ -#endif - } hsf_ctrl; - u16 regval; -}; - -/* ICH8 Flash Region Access Permissions */ -union ich8_hws_flash_regacc { - struct ich8_flracc { -#ifdef __BIG_ENDIAN - u32 gmwag :8; - u32 gmrag :8; - u32 grwa :8; - u32 grra :8; -#else - u32 grra :8; /* 0:7 GbE region Read Access */ - u32 grwa :8; /* 8:15 GbE region Write Access */ - u32 gmrag :8; /* 23:16 GbE Master Read Access Grant */ - u32 gmwag :8; /* 31:24 GbE Master Write Access Grant */ -#endif - } hsf_flregacc; - u16 regval; -}; - /* Miscellaneous PHY bit definitions. */ #define PHY_PREAMBLE 0xFFFFFFFF #define PHY_SOF 0x01 @@ -3384,10 +3029,10 @@ union ich8_hws_flash_regacc { #define MII_CR_SPEED_100 0x2000 #define MII_CR_SPEED_10 0x0000 #define E1000_PHY_ADDRESS 0x01 -#define PHY_AUTO_NEG_TIME 45 /* 4.5 Seconds */ -#define PHY_FORCE_TIME 20 /* 2.0 Seconds */ +#define PHY_AUTO_NEG_TIME 45 /* 4.5 Seconds */ +#define PHY_FORCE_TIME 20 /* 2.0 Seconds */ #define PHY_REVISION_MASK 0xFFFFFFF0 -#define DEVICE_SPEED_MASK 0x00000300 /* Device Ctrl Reg Speed Mask */ +#define DEVICE_SPEED_MASK 0x00000300 /* Device Ctrl Reg Speed Mask */ #define REG4_SPEED_MASK 0x01E0 #define REG9_SPEED_MASK 0x0300 #define ADVERTISE_10_HALF 0x0001 @@ -3396,8 +3041,8 @@ union ich8_hws_flash_regacc { #define ADVERTISE_100_FULL 0x0008 #define ADVERTISE_1000_HALF 0x0010 #define ADVERTISE_1000_FULL 0x0020 -#define AUTONEG_ADVERTISE_SPEED_DEFAULT 0x002F /* Everything but 1000-Half */ -#define AUTONEG_ADVERTISE_10_100_ALL 0x000F /* All 10/100 speeds*/ -#define AUTONEG_ADVERTISE_10_ALL 0x0003 /* 10Mbps Full & Half speeds*/ +#define AUTONEG_ADVERTISE_SPEED_DEFAULT 0x002F /* Everything but 1000-Half */ +#define AUTONEG_ADVERTISE_10_100_ALL 0x000F /* All 10/100 speeds */ +#define AUTONEG_ADVERTISE_10_ALL 0x0003 /* 10Mbps Full & Half speeds */ #endif /* _E1000_HW_H_ */ diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index c66dd4f9437c..bcd192ca47b0 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -31,7 +31,7 @@ char e1000_driver_name[] = "e1000"; static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver"; -#define DRV_VERSION "7.3.21-k3-NAPI" +#define DRV_VERSION "7.3.21-k5-NAPI" const char e1000_driver_version[] = DRV_VERSION; static const char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation."; @@ -131,7 +131,6 @@ static struct net_device_stats * e1000_get_stats(struct net_device *netdev); static int e1000_change_mtu(struct net_device *netdev, int new_mtu); static int e1000_set_mac(struct net_device *netdev, void *p); static irqreturn_t e1000_intr(int irq, void *data); -static irqreturn_t e1000_intr_msi(int irq, void *data); static bool e1000_clean_tx_irq(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring); static int e1000_clean(struct napi_struct *napi, int budget); @@ -258,25 +257,14 @@ module_exit(e1000_exit_module); static int e1000_request_irq(struct e1000_adapter *adapter) { - struct e1000_hw *hw = &adapter->hw; struct net_device *netdev = adapter->netdev; irq_handler_t handler = e1000_intr; int irq_flags = IRQF_SHARED; int err; - if (hw->mac_type >= e1000_82571) { - adapter->have_msi = !pci_enable_msi(adapter->pdev); - if (adapter->have_msi) { - handler = e1000_intr_msi; - irq_flags = 0; - } - } - err = request_irq(adapter->pdev->irq, handler, irq_flags, netdev->name, netdev); if (err) { - if (adapter->have_msi) - pci_disable_msi(adapter->pdev); DPRINTK(PROBE, ERR, "Unable to allocate interrupt Error: %d\n", err); } @@ -289,9 +277,6 @@ static void e1000_free_irq(struct e1000_adapter *adapter) struct net_device *netdev = adapter->netdev; free_irq(adapter->pdev->irq, netdev); - - if (adapter->have_msi) - pci_disable_msi(adapter->pdev); } /** @@ -345,76 +330,6 @@ static void e1000_update_mng_vlan(struct e1000_adapter *adapter) } } -/** - * e1000_release_hw_control - release control of the h/w to f/w - * @adapter: address of board private structure - * - * e1000_release_hw_control resets {CTRL_EXT|FWSM}:DRV_LOAD bit. - * For ASF and Pass Through versions of f/w this means that the - * driver is no longer loaded. For AMT version (only with 82573) i - * of the f/w this means that the network i/f is closed. - * - **/ - -static void e1000_release_hw_control(struct e1000_adapter *adapter) -{ - u32 ctrl_ext; - u32 swsm; - struct e1000_hw *hw = &adapter->hw; - - /* Let firmware taken over control of h/w */ - switch (hw->mac_type) { - case e1000_82573: - swsm = er32(SWSM); - ew32(SWSM, swsm & ~E1000_SWSM_DRV_LOAD); - break; - case e1000_82571: - case e1000_82572: - case e1000_80003es2lan: - case e1000_ich8lan: - ctrl_ext = er32(CTRL_EXT); - ew32(CTRL_EXT, ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD); - break; - default: - break; - } -} - -/** - * e1000_get_hw_control - get control of the h/w from f/w - * @adapter: address of board private structure - * - * e1000_get_hw_control sets {CTRL_EXT|FWSM}:DRV_LOAD bit. - * For ASF and Pass Through versions of f/w this means that - * the driver is loaded. For AMT version (only with 82573) - * of the f/w this means that the network i/f is open. - * - **/ - -static void e1000_get_hw_control(struct e1000_adapter *adapter) -{ - u32 ctrl_ext; - u32 swsm; - struct e1000_hw *hw = &adapter->hw; - - /* Let firmware know the driver has taken over */ - switch (hw->mac_type) { - case e1000_82573: - swsm = er32(SWSM); - ew32(SWSM, swsm | E1000_SWSM_DRV_LOAD); - break; - case e1000_82571: - case e1000_82572: - case e1000_80003es2lan: - case e1000_ich8lan: - ctrl_ext = er32(CTRL_EXT); - ew32(CTRL_EXT, ctrl_ext | E1000_CTRL_EXT_DRV_LOAD); - break; - default: - break; - } -} - static void e1000_init_manageability(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; @@ -425,20 +340,6 @@ static void e1000_init_manageability(struct e1000_adapter *adapter) /* disable hardware interception of ARP */ manc &= ~(E1000_MANC_ARP_EN); - /* enable receiving management packets to the host */ - /* this will probably generate destination unreachable messages - * from the host OS, but the packets will be handled on SMBUS */ - if (hw->has_manc2h) { - u32 manc2h = er32(MANC2H); - - manc |= E1000_MANC_EN_MNG2HOST; -#define E1000_MNG2HOST_PORT_623 (1 << 5) -#define E1000_MNG2HOST_PORT_664 (1 << 6) - manc2h |= E1000_MNG2HOST_PORT_623; - manc2h |= E1000_MNG2HOST_PORT_664; - ew32(MANC2H, manc2h); - } - ew32(MANC, manc); } } @@ -453,12 +354,6 @@ static void e1000_release_manageability(struct e1000_adapter *adapter) /* re-enable hardware interception of ARP */ manc |= E1000_MANC_ARP_EN; - if (hw->has_manc2h) - manc &= ~E1000_MANC_EN_MNG2HOST; - - /* don't explicitly have to mess with MANC2H since - * MANC has an enable disable that gates MANC2H */ - ew32(MANC, manc); } } @@ -563,15 +458,6 @@ static void e1000_power_down_phy(struct e1000_adapter *adapter) if (er32(MANC) & E1000_MANC_SMBUS_EN) goto out; break; - case e1000_82571: - case e1000_82572: - case e1000_82573: - case e1000_80003es2lan: - case e1000_ich8lan: - if (e1000_check_mng_mode(hw) || - e1000_check_phy_reset_block(hw)) - goto out; - break; default: goto out; } @@ -599,8 +485,7 @@ void e1000_down(struct e1000_adapter *adapter) ew32(RCTL, rctl & ~E1000_RCTL_EN); /* flush and sleep below */ - /* can be netif_tx_disable when NETIF_F_LLTX is removed */ - netif_stop_queue(netdev); + netif_tx_disable(netdev); /* disable transmits in the hardware */ tctl = er32(TCTL); @@ -671,16 +556,6 @@ void e1000_reset(struct e1000_adapter *adapter) legacy_pba_adjust = true; pba = E1000_PBA_30K; break; - case e1000_82571: - case e1000_82572: - case e1000_80003es2lan: - pba = E1000_PBA_38K; - break; - case e1000_82573: - pba = E1000_PBA_20K; - break; - case e1000_ich8lan: - pba = E1000_PBA_8K; case e1000_undefined: case e1000_num_macs: break; @@ -744,16 +619,8 @@ void e1000_reset(struct e1000_adapter *adapter) /* if short on rx space, rx wins and must trump tx * adjustment or use Early Receive if available */ - if (pba < min_rx_space) { - switch (hw->mac_type) { - case e1000_82573: - /* ERT enabled in e1000_configure_rx */ - break; - default: - pba = min_rx_space; - break; - } - } + if (pba < min_rx_space) + pba = min_rx_space; } } @@ -789,7 +656,6 @@ void e1000_reset(struct e1000_adapter *adapter) /* if (adapter->hwflags & HWFLAGS_PHY_PWR_BIT) { */ if (hw->mac_type >= e1000_82544 && - hw->mac_type <= e1000_82547_rev_2 && hw->autoneg == 1 && hw->autoneg_advertised == ADVERTISE_1000_FULL) { u32 ctrl = er32(CTRL); @@ -806,20 +672,6 @@ void e1000_reset(struct e1000_adapter *adapter) e1000_reset_adaptive(hw); e1000_phy_get_info(hw, &adapter->phy_info); - if (!adapter->smart_power_down && - (hw->mac_type == e1000_82571 || - hw->mac_type == e1000_82572)) { - u16 phy_data = 0; - /* speed up time to link by disabling smart power down, ignore - * the return value of this function because there is nothing - * different we would do if it failed */ - e1000_read_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, - &phy_data); - phy_data &= ~IGP02E1000_PM_SPD; - e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, - phy_data); - } - e1000_release_manageability(adapter); } @@ -1046,17 +898,6 @@ static int __devinit e1000_probe(struct pci_dev *pdev, goto err_sw_init; err = -EIO; - /* Flash BAR mapping must happen after e1000_sw_init - * because it depends on mac_type */ - if ((hw->mac_type == e1000_ich8lan) && - (pci_resource_flags(pdev, 1) & IORESOURCE_MEM)) { - hw->flash_address = pci_ioremap_bar(pdev, 1); - if (!hw->flash_address) - goto err_flashmap; - } - - if (e1000_check_phy_reset_block(hw)) - DPRINTK(PROBE, INFO, "PHY reset is blocked due to SOL/IDER session.\n"); if (hw->mac_type >= e1000_82543) { netdev->features = NETIF_F_SG | @@ -1064,21 +905,16 @@ static int __devinit e1000_probe(struct pci_dev *pdev, NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_FILTER; - if (hw->mac_type == e1000_ich8lan) - netdev->features &= ~NETIF_F_HW_VLAN_FILTER; } if ((hw->mac_type >= e1000_82544) && (hw->mac_type != e1000_82547)) netdev->features |= NETIF_F_TSO; - if (hw->mac_type > e1000_82547_rev_2) - netdev->features |= NETIF_F_TSO6; if (pci_using_dac) netdev->features |= NETIF_F_HIGHDMA; netdev->vlan_features |= NETIF_F_TSO; - netdev->vlan_features |= NETIF_F_TSO6; netdev->vlan_features |= NETIF_F_HW_CSUM; netdev->vlan_features |= NETIF_F_SG; @@ -1153,15 +989,8 @@ static int __devinit e1000_probe(struct pci_dev *pdev, EEPROM_INIT_CONTROL2_REG, 1, &eeprom_data); eeprom_apme_mask = E1000_EEPROM_82544_APM; break; - case e1000_ich8lan: - e1000_read_eeprom(hw, - EEPROM_INIT_CONTROL1_REG, 1, &eeprom_data); - eeprom_apme_mask = E1000_EEPROM_ICH8_APME; - break; case e1000_82546: case e1000_82546_rev_3: - case e1000_82571: - case e1000_80003es2lan: if (er32(STATUS) & E1000_STATUS_FUNC_1){ e1000_read_eeprom(hw, EEPROM_INIT_CONTROL3_PORT_B, 1, &eeprom_data); @@ -1185,17 +1014,12 @@ static int __devinit e1000_probe(struct pci_dev *pdev, break; case E1000_DEV_ID_82546EB_FIBER: case E1000_DEV_ID_82546GB_FIBER: - case E1000_DEV_ID_82571EB_FIBER: /* Wake events only supported on port A for dual fiber * regardless of eeprom setting */ if (er32(STATUS) & E1000_STATUS_FUNC_1) adapter->eeprom_wol = 0; break; case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3: - case E1000_DEV_ID_82571EB_QUAD_COPPER: - case E1000_DEV_ID_82571EB_QUAD_FIBER: - case E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE: - case E1000_DEV_ID_82571PT_QUAD_COPPER: /* if quad port adapter, disable WoL on all but port A */ if (global_quad_port_a != 0) adapter->eeprom_wol = 0; @@ -1213,39 +1037,18 @@ static int __devinit e1000_probe(struct pci_dev *pdev, /* print bus type/speed/width info */ DPRINTK(PROBE, INFO, "(PCI%s:%s:%s) ", - ((hw->bus_type == e1000_bus_type_pcix) ? "-X" : - (hw->bus_type == e1000_bus_type_pci_express ? " Express":"")), - ((hw->bus_speed == e1000_bus_speed_2500) ? "2.5Gb/s" : - (hw->bus_speed == e1000_bus_speed_133) ? "133MHz" : + ((hw->bus_type == e1000_bus_type_pcix) ? "-X" : ""), + ((hw->bus_speed == e1000_bus_speed_133) ? "133MHz" : (hw->bus_speed == e1000_bus_speed_120) ? "120MHz" : (hw->bus_speed == e1000_bus_speed_100) ? "100MHz" : (hw->bus_speed == e1000_bus_speed_66) ? "66MHz" : "33MHz"), - ((hw->bus_width == e1000_bus_width_64) ? "64-bit" : - (hw->bus_width == e1000_bus_width_pciex_4) ? "Width x4" : - (hw->bus_width == e1000_bus_width_pciex_1) ? "Width x1" : - "32-bit")); + ((hw->bus_width == e1000_bus_width_64) ? "64-bit" : "32-bit")); printk("%pM\n", netdev->dev_addr); - if (hw->bus_type == e1000_bus_type_pci_express) { - DPRINTK(PROBE, WARNING, "This device (id %04x:%04x) will no " - "longer be supported by this driver in the future.\n", - pdev->vendor, pdev->device); - DPRINTK(PROBE, WARNING, "please use the \"e1000e\" " - "driver instead.\n"); - } - /* reset the hardware with the new settings */ e1000_reset(adapter); - /* If the controller is 82573 and f/w is AMT, do not set - * DRV_LOAD until the interface is up. For all other cases, - * let the f/w know that the h/w is now under the control - * of the driver. */ - if (hw->mac_type != e1000_82573 || - !e1000_check_mng_mode(hw)) - e1000_get_hw_control(adapter); - strcpy(netdev->name, "eth%d"); err = register_netdev(netdev); if (err) @@ -1260,14 +1063,11 @@ static int __devinit e1000_probe(struct pci_dev *pdev, return 0; err_register: - e1000_release_hw_control(adapter); err_eeprom: - if (!e1000_check_phy_reset_block(hw)) - e1000_phy_hw_reset(hw); + e1000_phy_hw_reset(hw); if (hw->flash_address) iounmap(hw->flash_address); -err_flashmap: kfree(adapter->tx_ring); kfree(adapter->rx_ring); err_sw_init: @@ -1298,18 +1098,18 @@ static void __devexit e1000_remove(struct pci_dev *pdev) struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; + set_bit(__E1000_DOWN, &adapter->flags); + del_timer_sync(&adapter->tx_fifo_stall_timer); + del_timer_sync(&adapter->watchdog_timer); + del_timer_sync(&adapter->phy_info_timer); + cancel_work_sync(&adapter->reset_task); e1000_release_manageability(adapter); - /* Release control of h/w to f/w. If f/w is AMT enabled, this - * would have already happened in close and is redundant. */ - e1000_release_hw_control(adapter); - unregister_netdev(netdev); - if (!e1000_check_phy_reset_block(hw)) - e1000_phy_hw_reset(hw); + e1000_phy_hw_reset(hw); kfree(adapter->tx_ring); kfree(adapter->rx_ring); @@ -1472,12 +1272,6 @@ static int e1000_open(struct net_device *netdev) e1000_update_mng_vlan(adapter); } - /* If AMT is enabled, let the firmware know that the network - * interface is now open */ - if (hw->mac_type == e1000_82573 && - e1000_check_mng_mode(hw)) - e1000_get_hw_control(adapter); - /* before we allocate an interrupt, we must be ready to handle it. * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt * as soon as we call pci_request_irq, so we have to setup our @@ -1503,7 +1297,6 @@ static int e1000_open(struct net_device *netdev) return E1000_SUCCESS; err_req_irq: - e1000_release_hw_control(adapter); e1000_power_down_phy(adapter); e1000_free_all_rx_resources(adapter); err_setup_rx: @@ -1548,12 +1341,6 @@ static int e1000_close(struct net_device *netdev) e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id); } - /* If AMT is enabled, let the firmware know that the network - * interface is now closed */ - if (hw->mac_type == e1000_82573 && - e1000_check_mng_mode(hw)) - e1000_release_hw_control(adapter); - return 0; } @@ -1692,7 +1479,7 @@ static void e1000_configure_tx(struct e1000_adapter *adapter) { u64 tdba; struct e1000_hw *hw = &adapter->hw; - u32 tdlen, tctl, tipg, tarc; + u32 tdlen, tctl, tipg; u32 ipgr1, ipgr2; /* Setup the HW Tx Head and Tail descriptor pointers */ @@ -1714,8 +1501,7 @@ static void e1000_configure_tx(struct e1000_adapter *adapter) } /* Set the default values for the Tx Inter Packet Gap timer */ - if (hw->mac_type <= e1000_82547_rev_2 && - (hw->media_type == e1000_media_type_fiber || + if ((hw->media_type == e1000_media_type_fiber || hw->media_type == e1000_media_type_internal_serdes)) tipg = DEFAULT_82543_TIPG_IPGT_FIBER; else @@ -1728,10 +1514,6 @@ static void e1000_configure_tx(struct e1000_adapter *adapter) ipgr1 = DEFAULT_82542_TIPG_IPGR1; ipgr2 = DEFAULT_82542_TIPG_IPGR2; break; - case e1000_80003es2lan: - ipgr1 = DEFAULT_82543_TIPG_IPGR1; - ipgr2 = DEFAULT_80003ES2LAN_TIPG_IPGR2; - break; default: ipgr1 = DEFAULT_82543_TIPG_IPGR1; ipgr2 = DEFAULT_82543_TIPG_IPGR2; @@ -1754,21 +1536,6 @@ static void e1000_configure_tx(struct e1000_adapter *adapter) tctl |= E1000_TCTL_PSP | E1000_TCTL_RTLC | (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT); - if (hw->mac_type == e1000_82571 || hw->mac_type == e1000_82572) { - tarc = er32(TARC0); - /* set the speed mode bit, we'll clear it if we're not at - * gigabit link later */ - tarc |= (1 << 21); - ew32(TARC0, tarc); - } else if (hw->mac_type == e1000_80003es2lan) { - tarc = er32(TARC0); - tarc |= 1; - ew32(TARC0, tarc); - tarc = er32(TARC1); - tarc |= 1; - ew32(TARC1, tarc); - } - e1000_config_collision_dist(hw); /* Setup Transmit Descriptor Settings for eop descriptor */ @@ -1804,7 +1571,6 @@ static void e1000_configure_tx(struct e1000_adapter *adapter) static int e1000_setup_rx_resources(struct e1000_adapter *adapter, struct e1000_rx_ring *rxdr) { - struct e1000_hw *hw = &adapter->hw; struct pci_dev *pdev = adapter->pdev; int size, desc_len; @@ -1817,10 +1583,7 @@ static int e1000_setup_rx_resources(struct e1000_adapter *adapter, } memset(rxdr->buffer_info, 0, size); - if (hw->mac_type <= e1000_82547_rev_2) - desc_len = sizeof(struct e1000_rx_desc); - else - desc_len = sizeof(union e1000_rx_desc_packet_split); + desc_len = sizeof(struct e1000_rx_desc); /* Round up to nearest 4K */ @@ -1977,7 +1740,7 @@ static void e1000_configure_rx(struct e1000_adapter *adapter) { u64 rdba; struct e1000_hw *hw = &adapter->hw; - u32 rdlen, rctl, rxcsum, ctrl_ext; + u32 rdlen, rctl, rxcsum; if (adapter->netdev->mtu > ETH_DATA_LEN) { rdlen = adapter->rx_ring[0].count * @@ -2004,17 +1767,6 @@ static void e1000_configure_rx(struct e1000_adapter *adapter) ew32(ITR, 1000000000 / (adapter->itr * 256)); } - if (hw->mac_type >= e1000_82571) { - ctrl_ext = er32(CTRL_EXT); - /* Reset delay timers after every interrupt */ - ctrl_ext |= E1000_CTRL_EXT_INT_TIMER_CLR; - /* Auto-Mask interrupts upon ICR access */ - ctrl_ext |= E1000_CTRL_EXT_IAME; - ew32(IAM, 0xffffffff); - ew32(CTRL_EXT, ctrl_ext); - E1000_WRITE_FLUSH(); - } - /* Setup the HW Rx Head and Tail Descriptor Pointers and * the Base and Length of the Rx Descriptor Ring */ switch (adapter->num_rx_queues) { @@ -2329,22 +2081,6 @@ static int e1000_set_mac(struct net_device *netdev, void *p) e1000_rar_set(hw, hw->mac_addr, 0); - /* With 82571 controllers, LAA may be overwritten (with the default) - * due to controller reset from the other port. */ - if (hw->mac_type == e1000_82571) { - /* activate the work around */ - hw->laa_is_present = 1; - - /* Hold a copy of the LAA in RAR[14] This is done so that - * between the time RAR[0] gets clobbered and the time it - * gets fixed (in e1000_watchdog), the actual LAA is in one - * of the RARs and no incoming packets directed to this port - * are dropped. Eventaully the LAA will be in RAR[0] and - * RAR[14] */ - e1000_rar_set(hw, hw->mac_addr, - E1000_RAR_ENTRIES - 1); - } - if (hw->mac_type == e1000_82542_rev2_0) e1000_leave_82542_rst(adapter); @@ -2371,9 +2107,7 @@ static void e1000_set_rx_mode(struct net_device *netdev) u32 rctl; u32 hash_value; int i, rar_entries = E1000_RAR_ENTRIES; - int mta_reg_count = (hw->mac_type == e1000_ich8lan) ? - E1000_NUM_MTA_REGISTERS_ICH8LAN : - E1000_NUM_MTA_REGISTERS; + int mta_reg_count = E1000_NUM_MTA_REGISTERS; u32 *mcarray = kcalloc(mta_reg_count, sizeof(u32), GFP_ATOMIC); if (!mcarray) { @@ -2381,13 +2115,6 @@ static void e1000_set_rx_mode(struct net_device *netdev) return; } - if (hw->mac_type == e1000_ich8lan) - rar_entries = E1000_RAR_ENTRIES_ICH8LAN; - - /* reserve RAR[14] for LAA over-write work-around */ - if (hw->mac_type == e1000_82571) - rar_entries--; - /* Check for Promiscuous and All Multicast modes */ rctl = er32(RCTL); @@ -2396,15 +2123,13 @@ static void e1000_set_rx_mode(struct net_device *netdev) rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE); rctl &= ~E1000_RCTL_VFE; } else { - if (netdev->flags & IFF_ALLMULTI) { + if (netdev->flags & IFF_ALLMULTI) rctl |= E1000_RCTL_MPE; - } else { + else rctl &= ~E1000_RCTL_MPE; - } - if (adapter->hw.mac_type != e1000_ich8lan) - /* Enable VLAN filter if there is a VLAN */ - if (adapter->vlgrp) - rctl |= E1000_RCTL_VFE; + /* Enable VLAN filter if there is a VLAN */ + if (adapter->vlgrp) + rctl |= E1000_RCTL_VFE; } if (netdev->uc.count > rar_entries - 1) { @@ -2427,7 +2152,6 @@ static void e1000_set_rx_mode(struct net_device *netdev) * * RAR 0 is used for the station MAC adddress * if there are not 14 addresses, go ahead and clear the filters - * -- with 82571 controllers only 0-13 entries are filled here */ i = 1; if (use_uc) @@ -2521,12 +2245,46 @@ static void e1000_82547_tx_fifo_stall(unsigned long data) adapter->tx_fifo_head = 0; atomic_set(&adapter->tx_fifo_stall, 0); netif_wake_queue(netdev); - } else { + } else if (!test_bit(__E1000_DOWN, &adapter->flags)) { mod_timer(&adapter->tx_fifo_stall_timer, jiffies + 1); } } } +static bool e1000_has_link(struct e1000_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + bool link_active = false; + + /* get_link_status is set on LSC (link status) interrupt or + * rx sequence error interrupt. get_link_status will stay + * false until the e1000_check_for_link establishes link + * for copper adapters ONLY + */ + switch (hw->media_type) { + case e1000_media_type_copper: + if (hw->get_link_status) { + e1000_check_for_link(hw); + link_active = !hw->get_link_status; + } else { + link_active = true; + } + break; + case e1000_media_type_fiber: + e1000_check_for_link(hw); + link_active = !!(er32(STATUS) & E1000_STATUS_LU); + break; + case e1000_media_type_internal_serdes: + e1000_check_for_link(hw); + link_active = hw->serdes_has_link; + break; + default: + break; + } + + return link_active; +} + /** * e1000_watchdog - Timer Call-back * @data: pointer to adapter cast into an unsigned long @@ -2538,33 +2296,16 @@ static void e1000_watchdog(unsigned long data) struct net_device *netdev = adapter->netdev; struct e1000_tx_ring *txdr = adapter->tx_ring; u32 link, tctl; - s32 ret_val; - - ret_val = e1000_check_for_link(hw); - if ((ret_val == E1000_ERR_PHY) && - (hw->phy_type == e1000_phy_igp_3) && - (er32(CTRL) & E1000_PHY_CTRL_GBE_DISABLE)) { - /* See e1000_kumeran_lock_loss_workaround() */ - DPRINTK(LINK, INFO, - "Gigabit has been disabled, downgrading speed\n"); - } - if (hw->mac_type == e1000_82573) { - e1000_enable_tx_pkt_filtering(hw); - if (adapter->mng_vlan_id != hw->mng_cookie.vlan_id) - e1000_update_mng_vlan(adapter); - } - - if ((hw->media_type == e1000_media_type_internal_serdes) && - !(er32(TXCW) & E1000_TXCW_ANE)) - link = !hw->serdes_link_down; - else - link = er32(STATUS) & E1000_STATUS_LU; + link = e1000_has_link(adapter); + if ((netif_carrier_ok(netdev)) && link) + goto link_up; if (link) { if (!netif_carrier_ok(netdev)) { u32 ctrl; bool txb2b = true; + /* update snapshot of PHY registers on LSC */ e1000_get_speed_and_duplex(hw, &adapter->link_speed, &adapter->link_duplex); @@ -2589,7 +2330,7 @@ static void e1000_watchdog(unsigned long data) case SPEED_10: txb2b = false; netdev->tx_queue_len = 10; - adapter->tx_timeout_factor = 8; + adapter->tx_timeout_factor = 16; break; case SPEED_100: txb2b = false; @@ -2598,52 +2339,16 @@ static void e1000_watchdog(unsigned long data) break; } - if ((hw->mac_type == e1000_82571 || - hw->mac_type == e1000_82572) && - !txb2b) { - u32 tarc0; - tarc0 = er32(TARC0); - tarc0 &= ~(1 << 21); - ew32(TARC0, tarc0); - } - - /* disable TSO for pcie and 10/100 speeds, to avoid - * some hardware issues */ - if (!adapter->tso_force && - hw->bus_type == e1000_bus_type_pci_express){ - switch (adapter->link_speed) { - case SPEED_10: - case SPEED_100: - DPRINTK(PROBE,INFO, - "10/100 speed: disabling TSO\n"); - netdev->features &= ~NETIF_F_TSO; - netdev->features &= ~NETIF_F_TSO6; - break; - case SPEED_1000: - netdev->features |= NETIF_F_TSO; - netdev->features |= NETIF_F_TSO6; - break; - default: - /* oops */ - break; - } - } - - /* enable transmits in the hardware, need to do this - * after setting TARC0 */ + /* enable transmits in the hardware */ tctl = er32(TCTL); tctl |= E1000_TCTL_EN; ew32(TCTL, tctl); netif_carrier_on(netdev); - mod_timer(&adapter->phy_info_timer, round_jiffies(jiffies + 2 * HZ)); + if (!test_bit(__E1000_DOWN, &adapter->flags)) + mod_timer(&adapter->phy_info_timer, + round_jiffies(jiffies + 2 * HZ)); adapter->smartspeed = 0; - } else { - /* make sure the receive unit is started */ - if (hw->rx_needs_kicking) { - u32 rctl = er32(RCTL); - ew32(RCTL, rctl | E1000_RCTL_EN); - } } } else { if (netif_carrier_ok(netdev)) { @@ -2652,21 +2357,16 @@ static void e1000_watchdog(unsigned long data) printk(KERN_INFO "e1000: %s NIC Link is Down\n", netdev->name); netif_carrier_off(netdev); - mod_timer(&adapter->phy_info_timer, round_jiffies(jiffies + 2 * HZ)); - - /* 80003ES2LAN workaround-- - * For packet buffer work-around on link down event; - * disable receives in the ISR and - * reset device here in the watchdog - */ - if (hw->mac_type == e1000_80003es2lan) - /* reset device */ - schedule_work(&adapter->reset_task); + + if (!test_bit(__E1000_DOWN, &adapter->flags)) + mod_timer(&adapter->phy_info_timer, + round_jiffies(jiffies + 2 * HZ)); } e1000_smartspeed(adapter); } +link_up: e1000_update_stats(adapter); hw->tx_packet_delta = adapter->stats.tpt - adapter->tpt_old; @@ -2700,13 +2400,10 @@ static void e1000_watchdog(unsigned long data) /* Force detection of hung controller every watchdog period */ adapter->detect_tx_hung = true; - /* With 82571 controllers, LAA may be overwritten due to controller - * reset from the other port. Set the appropriate LAA in RAR[0] */ - if (hw->mac_type == e1000_82571 && hw->laa_is_present) - e1000_rar_set(hw, hw->mac_addr, 0); - /* Reset the timer */ - mod_timer(&adapter->watchdog_timer, round_jiffies(jiffies + 2 * HZ)); + if (!test_bit(__E1000_DOWN, &adapter->flags)) + mod_timer(&adapter->watchdog_timer, + round_jiffies(jiffies + 2 * HZ)); } enum latency_range { @@ -2718,6 +2415,11 @@ enum latency_range { /** * e1000_update_itr - update the dynamic ITR value based on statistics + * @adapter: pointer to adapter + * @itr_setting: current adapter->itr + * @packets: the number of packets during this measurement interval + * @bytes: the number of bytes during this measurement interval + * * Stores a new ITR value based on packets and byte * counts during the last interrupt. The advantage of per interrupt * computation is faster updates and more accurate ITR for the current @@ -2727,10 +2429,6 @@ enum latency_range { * while increasing bulk throughput. * this functionality is controlled by the InterruptThrottleRate module * parameter (see e1000_param.c) - * @adapter: pointer to adapter - * @itr_setting: current adapter->itr - * @packets: the number of packets during this measurement interval - * @bytes: the number of bytes during this measurement interval **/ static unsigned int e1000_update_itr(struct e1000_adapter *adapter, u16 itr_setting, int packets, int bytes) @@ -3035,8 +2733,9 @@ static int e1000_tx_map(struct e1000_adapter *adapter, size -= 4; buffer_info->length = size; - buffer_info->dma = skb_shinfo(skb)->dma_head + offset; + /* set time_stamp *before* dma to help avoid a possible race */ buffer_info->time_stamp = jiffies; + buffer_info->dma = skb_shinfo(skb)->dma_head + offset; buffer_info->next_to_watch = i; len -= size; @@ -3071,13 +2770,14 @@ static int e1000_tx_map(struct e1000_adapter *adapter, * Avoid terminating buffers within evenly-aligned * dwords. */ if (unlikely(adapter->pcix_82544 && - !((unsigned long)(frag->page+offset+size-1) & 4) && - size > 4)) + !((unsigned long)(page_to_phys(frag->page) + offset + + size - 1) & 4) && + size > 4)) size -= 4; buffer_info->length = size; - buffer_info->dma = map[f] + offset; buffer_info->time_stamp = jiffies; + buffer_info->dma = map[f] + offset; buffer_info->next_to_watch = i; len -= size; @@ -3186,41 +2886,6 @@ no_fifo_stall_required: return 0; } -#define MINIMUM_DHCP_PACKET_SIZE 282 -static int e1000_transfer_dhcp_info(struct e1000_adapter *adapter, - struct sk_buff *skb) -{ - struct e1000_hw *hw = &adapter->hw; - u16 length, offset; - if (vlan_tx_tag_present(skb)) { - if (!((vlan_tx_tag_get(skb) == hw->mng_cookie.vlan_id) && - ( hw->mng_cookie.status & - E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) ) - return 0; - } - if (skb->len > MINIMUM_DHCP_PACKET_SIZE) { - struct ethhdr *eth = (struct ethhdr *)skb->data; - if ((htons(ETH_P_IP) == eth->h_proto)) { - const struct iphdr *ip = - (struct iphdr *)((u8 *)skb->data+14); - if (IPPROTO_UDP == ip->protocol) { - struct udphdr *udp = - (struct udphdr *)((u8 *)ip + - (ip->ihl << 2)); - if (ntohs(udp->dest) == 67) { - offset = (u8 *)udp + 8 - skb->data; - length = skb->len - offset; - - return e1000_mng_write_dhcp_info(hw, - (u8 *)udp + 8, - length); - } - } - } - } - return 0; -} - static int __e1000_maybe_stop_tx(struct net_device *netdev, int size) { struct e1000_adapter *adapter = netdev_priv(netdev); @@ -3279,11 +2944,6 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, return NETDEV_TX_OK; } - /* 82571 and newer doesn't need the workaround that limited descriptor - * length to 4kB */ - if (hw->mac_type >= e1000_82571) - max_per_txd = 8192; - mss = skb_shinfo(skb)->gso_size; /* The controller does a simple calculation to * make sure there is enough room in the FIFO before @@ -3296,9 +2956,6 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, max_per_txd = min(mss << 2, max_per_txd); max_txd_pwr = fls(max_per_txd) - 1; - /* TSO Workaround for 82571/2/3 Controllers -- if skb->data - * points to just header, pull a few bytes of payload from - * frags into skb->data */ hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb); if (skb->data_len && hdr_len == len) { switch (hw->mac_type) { @@ -3313,10 +2970,6 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, if ((unsigned long)(skb_tail_pointer(skb) - 1) & 4) break; /* fall through */ - case e1000_82571: - case e1000_82572: - case e1000_82573: - case e1000_ich8lan: pull_size = min((unsigned int)4, skb->data_len); if (!__pskb_pull_tail(skb, pull_size)) { DPRINTK(DRV, ERR, @@ -3361,11 +3014,6 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, if (adapter->pcix_82544) count += nr_frags; - - if (hw->tx_pkt_filtering && - (hw->mac_type == e1000_82573)) - e1000_transfer_dhcp_info(adapter, skb); - /* need: count + 2 desc gap to keep tail from touching * head, otherwise try next time */ if (unlikely(e1000_maybe_stop_tx(netdev, tx_ring, count + 2))) @@ -3374,7 +3022,9 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, if (unlikely(hw->mac_type == e1000_82547)) { if (unlikely(e1000_82547_fifo_workaround(adapter, skb))) { netif_stop_queue(netdev); - mod_timer(&adapter->tx_fifo_stall_timer, jiffies + 1); + if (!test_bit(__E1000_DOWN, &adapter->flags)) + mod_timer(&adapter->tx_fifo_stall_timer, + jiffies + 1); return NETDEV_TX_BUSY; } } @@ -3393,14 +3043,12 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, } if (likely(tso)) { - tx_ring->last_tx_tso = 1; + if (likely(hw->mac_type != e1000_82544)) + tx_ring->last_tx_tso = 1; tx_flags |= E1000_TX_FLAGS_TSO; } else if (likely(e1000_tx_csum(adapter, tx_ring, skb))) tx_flags |= E1000_TX_FLAGS_CSUM; - /* Old method was to assume IPv4 packet by default if TSO was enabled. - * 82571 hardware supports TSO capabilities for IPv6 as well... - * no longer assume, we must. */ if (likely(skb->protocol == htons(ETH_P_IP))) tx_flags |= E1000_TX_FLAGS_IPV4; @@ -3472,7 +3120,6 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu) struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; int max_frame = new_mtu + ENET_HEADER_SIZE + ETHERNET_FCS_SIZE; - u16 eeprom_data = 0; if ((max_frame < MINIMUM_ETHERNET_FRAME_SIZE) || (max_frame > MAX_JUMBO_FRAME_SIZE)) { @@ -3483,44 +3130,23 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu) /* Adapter-specific max frame size limits. */ switch (hw->mac_type) { case e1000_undefined ... e1000_82542_rev2_1: - case e1000_ich8lan: if (max_frame > (ETH_FRAME_LEN + ETH_FCS_LEN)) { DPRINTK(PROBE, ERR, "Jumbo Frames not supported.\n"); return -EINVAL; } break; - case e1000_82573: - /* Jumbo Frames not supported if: - * - this is not an 82573L device - * - ASPM is enabled in any way (0x1A bits 3:2) */ - e1000_read_eeprom(hw, EEPROM_INIT_3GIO_3, 1, - &eeprom_data); - if ((hw->device_id != E1000_DEV_ID_82573L) || - (eeprom_data & EEPROM_WORD1A_ASPM_MASK)) { - if (max_frame > (ETH_FRAME_LEN + ETH_FCS_LEN)) { - DPRINTK(PROBE, ERR, - "Jumbo Frames not supported.\n"); - return -EINVAL; - } - break; - } - /* ERT will be enabled later to enable wire speed receives */ - - /* fall through to get support */ - case e1000_82571: - case e1000_82572: - case e1000_80003es2lan: -#define MAX_STD_JUMBO_FRAME_SIZE 9234 - if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) { - DPRINTK(PROBE, ERR, "MTU > 9216 not supported.\n"); - return -EINVAL; - } - break; default: /* Capable of supporting up to MAX_JUMBO_FRAME_SIZE limit. */ break; } + while (test_and_set_bit(__E1000_RESETTING, &adapter->flags)) + msleep(1); + /* e1000_down has a dependency on max_frame_size */ + hw->max_frame_size = max_frame; + if (netif_running(netdev)) + e1000_down(adapter); + /* NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN * means we reserve 2 more, this pushes us to allocate from the next * larger slab size. @@ -3549,11 +3175,16 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu) (max_frame == MAXIMUM_ETHERNET_VLAN_SIZE))) adapter->rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE; + printk(KERN_INFO "e1000: %s changing MTU from %d to %d\n", + netdev->name, netdev->mtu, new_mtu); netdev->mtu = new_mtu; - hw->max_frame_size = max_frame; if (netif_running(netdev)) - e1000_reinit_locked(adapter); + e1000_up(adapter); + else + e1000_reset(adapter); + + clear_bit(__E1000_RESETTING, &adapter->flags); return 0; } @@ -3596,14 +3227,12 @@ void e1000_update_stats(struct e1000_adapter *adapter) adapter->stats.mprc += er32(MPRC); adapter->stats.roc += er32(ROC); - if (hw->mac_type != e1000_ich8lan) { - adapter->stats.prc64 += er32(PRC64); - adapter->stats.prc127 += er32(PRC127); - adapter->stats.prc255 += er32(PRC255); - adapter->stats.prc511 += er32(PRC511); - adapter->stats.prc1023 += er32(PRC1023); - adapter->stats.prc1522 += er32(PRC1522); - } + adapter->stats.prc64 += er32(PRC64); + adapter->stats.prc127 += er32(PRC127); + adapter->stats.prc255 += er32(PRC255); + adapter->stats.prc511 += er32(PRC511); + adapter->stats.prc1023 += er32(PRC1023); + adapter->stats.prc1522 += er32(PRC1522); adapter->stats.symerrs += er32(SYMERRS); adapter->stats.mpc += er32(MPC); @@ -3632,14 +3261,12 @@ void e1000_update_stats(struct e1000_adapter *adapter) adapter->stats.toth += er32(TOTH); adapter->stats.tpr += er32(TPR); - if (hw->mac_type != e1000_ich8lan) { - adapter->stats.ptc64 += er32(PTC64); - adapter->stats.ptc127 += er32(PTC127); - adapter->stats.ptc255 += er32(PTC255); - adapter->stats.ptc511 += er32(PTC511); - adapter->stats.ptc1023 += er32(PTC1023); - adapter->stats.ptc1522 += er32(PTC1522); - } + adapter->stats.ptc64 += er32(PTC64); + adapter->stats.ptc127 += er32(PTC127); + adapter->stats.ptc255 += er32(PTC255); + adapter->stats.ptc511 += er32(PTC511); + adapter->stats.ptc1023 += er32(PTC1023); + adapter->stats.ptc1522 += er32(PTC1522); adapter->stats.mptc += er32(MPTC); adapter->stats.bptc += er32(BPTC); @@ -3659,20 +3286,6 @@ void e1000_update_stats(struct e1000_adapter *adapter) adapter->stats.tsctc += er32(TSCTC); adapter->stats.tsctfc += er32(TSCTFC); } - if (hw->mac_type > e1000_82547_rev_2) { - adapter->stats.iac += er32(IAC); - adapter->stats.icrxoc += er32(ICRXOC); - - if (hw->mac_type != e1000_ich8lan) { - adapter->stats.icrxptc += er32(ICRXPTC); - adapter->stats.icrxatc += er32(ICRXATC); - adapter->stats.ictxptc += er32(ICTXPTC); - adapter->stats.ictxatc += er32(ICTXATC); - adapter->stats.ictxqec += er32(ICTXQEC); - adapter->stats.ictxqmtc += er32(ICTXQMTC); - adapter->stats.icrxdmtc += er32(ICRXDMTC); - } - } /* Fill out the OS statistics structure */ adapter->net_stats.multicast = adapter->stats.mprc; @@ -3731,49 +3344,6 @@ void e1000_update_stats(struct e1000_adapter *adapter) } /** - * e1000_intr_msi - Interrupt Handler - * @irq: interrupt number - * @data: pointer to a network interface device structure - **/ - -static irqreturn_t e1000_intr_msi(int irq, void *data) -{ - struct net_device *netdev = data; - struct e1000_adapter *adapter = netdev_priv(netdev); - struct e1000_hw *hw = &adapter->hw; - u32 icr = er32(ICR); - - /* in NAPI mode read ICR disables interrupts using IAM */ - - if (icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) { - hw->get_link_status = 1; - /* 80003ES2LAN workaround-- For packet buffer work-around on - * link down event; disable receives here in the ISR and reset - * adapter in watchdog */ - if (netif_carrier_ok(netdev) && - (hw->mac_type == e1000_80003es2lan)) { - /* disable receives */ - u32 rctl = er32(RCTL); - ew32(RCTL, rctl & ~E1000_RCTL_EN); - } - /* guard against interrupt when we're going down */ - if (!test_bit(__E1000_DOWN, &adapter->flags)) - mod_timer(&adapter->watchdog_timer, jiffies + 1); - } - - if (likely(napi_schedule_prep(&adapter->napi))) { - adapter->total_tx_bytes = 0; - adapter->total_tx_packets = 0; - adapter->total_rx_bytes = 0; - adapter->total_rx_packets = 0; - __napi_schedule(&adapter->napi); - } else - e1000_irq_enable(adapter); - - return IRQ_HANDLED; -} - -/** * e1000_intr - Interrupt Handler * @irq: interrupt number * @data: pointer to a network interface device structure @@ -3784,43 +3354,22 @@ static irqreturn_t e1000_intr(int irq, void *data) struct net_device *netdev = data; struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; - u32 rctl, icr = er32(ICR); + u32 icr = er32(ICR); if (unlikely((!icr) || test_bit(__E1000_DOWN, &adapter->flags))) return IRQ_NONE; /* Not our interrupt */ - /* IMS will not auto-mask if INT_ASSERTED is not set, and if it is - * not set, then the adapter didn't send an interrupt */ - if (unlikely(hw->mac_type >= e1000_82571 && - !(icr & E1000_ICR_INT_ASSERTED))) - return IRQ_NONE; - - /* Interrupt Auto-Mask...upon reading ICR, interrupts are masked. No - * need for the IMC write */ - if (unlikely(icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC))) { hw->get_link_status = 1; - /* 80003ES2LAN workaround-- - * For packet buffer work-around on link down event; - * disable receives here in the ISR and - * reset adapter in watchdog - */ - if (netif_carrier_ok(netdev) && - (hw->mac_type == e1000_80003es2lan)) { - /* disable receives */ - rctl = er32(RCTL); - ew32(RCTL, rctl & ~E1000_RCTL_EN); - } /* guard against interrupt when we're going down */ if (!test_bit(__E1000_DOWN, &adapter->flags)) mod_timer(&adapter->watchdog_timer, jiffies + 1); } - if (unlikely(hw->mac_type < e1000_82571)) { - /* disable interrupts, without the synchronize_irq bit */ - ew32(IMC, ~0); - E1000_WRITE_FLUSH(); - } + /* disable interrupts, without the synchronize_irq bit */ + ew32(IMC, ~0); + E1000_WRITE_FLUSH(); + if (likely(napi_schedule_prep(&adapter->napi))) { adapter->total_tx_bytes = 0; adapter->total_tx_packets = 0; @@ -3844,17 +3393,13 @@ static irqreturn_t e1000_intr(int irq, void *data) static int e1000_clean(struct napi_struct *napi, int budget) { struct e1000_adapter *adapter = container_of(napi, struct e1000_adapter, napi); - struct net_device *poll_dev = adapter->netdev; - int tx_cleaned = 0, work_done = 0; - - adapter = netdev_priv(poll_dev); + int tx_clean_complete = 0, work_done = 0; - tx_cleaned = e1000_clean_tx_irq(adapter, &adapter->tx_ring[0]); + tx_clean_complete = e1000_clean_tx_irq(adapter, &adapter->tx_ring[0]); - adapter->clean_rx(adapter, &adapter->rx_ring[0], - &work_done, budget); + adapter->clean_rx(adapter, &adapter->rx_ring[0], &work_done, budget); - if (!tx_cleaned) + if (!tx_clean_complete) work_done = budget; /* If budget not fully consumed, exit the polling mode */ @@ -3925,7 +3470,9 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter, * sees the new next_to_clean. */ smp_mb(); - if (netif_queue_stopped(netdev)) { + + if (netif_queue_stopped(netdev) && + !(test_bit(__E1000_DOWN, &adapter->flags))) { netif_wake_queue(netdev); ++adapter->restart_queue; } @@ -3935,8 +3482,8 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter, /* Detect a transmit hang in hardware, this serializes the * check with the clearing of time_stamp and movement of i */ adapter->detect_tx_hung = false; - if (tx_ring->buffer_info[i].time_stamp && - time_after(jiffies, tx_ring->buffer_info[i].time_stamp + + if (tx_ring->buffer_info[eop].time_stamp && + time_after(jiffies, tx_ring->buffer_info[eop].time_stamp + (adapter->tx_timeout_factor * HZ)) && !(er32(STATUS) & E1000_STATUS_TXOFF)) { @@ -3958,7 +3505,7 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter, readl(hw->hw_addr + tx_ring->tdt), tx_ring->next_to_use, tx_ring->next_to_clean, - tx_ring->buffer_info[i].time_stamp, + tx_ring->buffer_info[eop].time_stamp, eop, jiffies, eop_desc->upper.fields.status); @@ -3999,25 +3546,13 @@ static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err, return; } /* TCP/UDP Checksum has not been calculated */ - if (hw->mac_type <= e1000_82547_rev_2) { - if (!(status & E1000_RXD_STAT_TCPCS)) - return; - } else { - if (!(status & (E1000_RXD_STAT_TCPCS | E1000_RXD_STAT_UDPCS))) - return; - } + if (!(status & E1000_RXD_STAT_TCPCS)) + return; + /* It must be a TCP or UDP packet with a valid checksum */ if (likely(status & E1000_RXD_STAT_TCPCS)) { /* TCP checksum is good */ skb->ip_summed = CHECKSUM_UNNECESSARY; - } else if (hw->mac_type > e1000_82547_rev_2) { - /* IP fragment with UDP payload */ - /* Hardware complements the payload checksum, so we undo it - * and then put the value in host order for further stack use. - */ - __sum16 sum = (__force __sum16)htons(csum); - skb->csum = csum_unfold(~sum); - skb->ip_summed = CHECKSUM_COMPLETE; } adapter->hw_csum_good++; } @@ -4814,20 +4349,6 @@ void e1000_pcix_set_mmrbc(struct e1000_hw *hw, int mmrbc) pcix_set_mmrbc(adapter->pdev, mmrbc); } -s32 e1000_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value) -{ - struct e1000_adapter *adapter = hw->back; - u16 cap_offset; - - cap_offset = pci_find_capability(adapter->pdev, PCI_CAP_ID_EXP); - if (!cap_offset) - return -E1000_ERR_CONFIG; - - pci_read_config_word(adapter->pdev, cap_offset + reg, value); - - return E1000_SUCCESS; -} - void e1000_io_write(struct e1000_hw *hw, unsigned long port, u32 value) { outl(value, port); @@ -4850,33 +4371,27 @@ static void e1000_vlan_rx_register(struct net_device *netdev, ctrl |= E1000_CTRL_VME; ew32(CTRL, ctrl); - if (adapter->hw.mac_type != e1000_ich8lan) { - /* enable VLAN receive filtering */ - rctl = er32(RCTL); - rctl &= ~E1000_RCTL_CFIEN; - if (!(netdev->flags & IFF_PROMISC)) - rctl |= E1000_RCTL_VFE; - ew32(RCTL, rctl); - e1000_update_mng_vlan(adapter); - } + /* enable VLAN receive filtering */ + rctl = er32(RCTL); + rctl &= ~E1000_RCTL_CFIEN; + if (!(netdev->flags & IFF_PROMISC)) + rctl |= E1000_RCTL_VFE; + ew32(RCTL, rctl); + e1000_update_mng_vlan(adapter); } else { /* disable VLAN tag insert/strip */ ctrl = er32(CTRL); ctrl &= ~E1000_CTRL_VME; ew32(CTRL, ctrl); - if (adapter->hw.mac_type != e1000_ich8lan) { - /* disable VLAN receive filtering */ - rctl = er32(RCTL); - rctl &= ~E1000_RCTL_VFE; - ew32(RCTL, rctl); + /* disable VLAN receive filtering */ + rctl = er32(RCTL); + rctl &= ~E1000_RCTL_VFE; + ew32(RCTL, rctl); - if (adapter->mng_vlan_id != - (u16)E1000_MNG_VLAN_NONE) { - e1000_vlan_rx_kill_vid(netdev, - adapter->mng_vlan_id); - adapter->mng_vlan_id = E1000_MNG_VLAN_NONE; - } + if (adapter->mng_vlan_id != (u16)E1000_MNG_VLAN_NONE) { + e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id); + adapter->mng_vlan_id = E1000_MNG_VLAN_NONE; } } @@ -4913,14 +4428,6 @@ static void e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid) if (!test_bit(__E1000_DOWN, &adapter->flags)) e1000_irq_enable(adapter); - if ((hw->mng_cookie.status & - E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) && - (vid == adapter->mng_vlan_id)) { - /* release control to f/w */ - e1000_release_hw_control(adapter); - return; - } - /* remove VID from filter table */ index = (vid >> 5) & 0x7F; vfta = E1000_READ_REG_ARRAY(hw, VFTA, index); @@ -5031,16 +4538,13 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake) } if (hw->media_type == e1000_media_type_fiber || - hw->media_type == e1000_media_type_internal_serdes) { + hw->media_type == e1000_media_type_internal_serdes) { /* keep the laser running in D3 */ ctrl_ext = er32(CTRL_EXT); ctrl_ext |= E1000_CTRL_EXT_SDP7_DATA; ew32(CTRL_EXT, ctrl_ext); } - /* Allow time for pending master requests to run */ - e1000_disable_pciex_master(hw); - ew32(WUC, E1000_WUC_PME_EN); ew32(WUFC, wufc); } else { @@ -5056,16 +4560,9 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake) if (adapter->en_mng_pt) *enable_wake = true; - if (hw->phy_type == e1000_phy_igp_3) - e1000_phy_powerdown_workaround(hw); - if (netif_running(netdev)) e1000_free_irq(adapter); - /* Release control of h/w to f/w. If f/w is AMT enabled, this - * would have already happened in close and is redundant. */ - e1000_release_hw_control(adapter); - pci_disable_device(pdev); return 0; @@ -5131,14 +4628,6 @@ static int e1000_resume(struct pci_dev *pdev) netif_device_attach(netdev); - /* If the controller is 82573 and f/w is AMT, do not set - * DRV_LOAD until the interface is up. For all other cases, - * let the f/w know that the h/w is now under the control - * of the driver. */ - if (hw->mac_type != e1000_82573 || - !e1000_check_mng_mode(hw)) - e1000_get_hw_control(adapter); - return 0; } #endif @@ -5174,7 +4663,7 @@ static void e1000_netpoll(struct net_device *netdev) /** * e1000_io_error_detected - called when PCI error is detected * @pdev: Pointer to PCI device - * @state: The current pci conneection state + * @state: The current pci connection state * * This function is called after a PCI bus error affecting * this device has been detected. @@ -5243,7 +4732,6 @@ static void e1000_io_resume(struct pci_dev *pdev) { struct net_device *netdev = pci_get_drvdata(pdev); struct e1000_adapter *adapter = netdev_priv(netdev); - struct e1000_hw *hw = &adapter->hw; e1000_init_manageability(adapter); @@ -5255,15 +4743,6 @@ static void e1000_io_resume(struct pci_dev *pdev) } netif_device_attach(netdev); - - /* If the controller is 82573 and f/w is AMT, do not set - * DRV_LOAD until the interface is up. For all other cases, - * let the f/w know that the h/w is now under the control - * of the driver. */ - if (hw->mac_type != e1000_82573 || - !e1000_check_mng_mode(hw)) - e1000_get_hw_control(adapter); - } /* e1000_main.c */ diff --git a/drivers/net/e1000/e1000_param.c b/drivers/net/e1000/e1000_param.c index 213437d13154..38d2741ccae9 100644 --- a/drivers/net/e1000/e1000_param.c +++ b/drivers/net/e1000/e1000_param.c @@ -518,22 +518,6 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter) adapter->smart_power_down = opt.def; } } - { /* Kumeran Lock Loss Workaround */ - opt = (struct e1000_option) { - .type = enable_option, - .name = "Kumeran Lock Loss Workaround", - .err = "defaulting to Enabled", - .def = OPTION_ENABLED - }; - - if (num_KumeranLockLoss > bd) { - unsigned int kmrn_lock_loss = KumeranLockLoss[bd]; - e1000_validate_option(&kmrn_lock_loss, &opt, adapter); - adapter->hw.kmrn_lock_loss_workaround_disabled = !kmrn_lock_loss; - } else { - adapter->hw.kmrn_lock_loss_workaround_disabled = !opt.def; - } - } switch (adapter->hw.media_type) { case e1000_media_type_fiber: @@ -626,12 +610,6 @@ static void __devinit e1000_check_copper_options(struct e1000_adapter *adapter) .p = dplx_list }} }; - if (e1000_check_phy_reset_block(&adapter->hw)) { - DPRINTK(PROBE, INFO, - "Link active due to SoL/IDER Session. " - "Speed/Duplex/AutoNeg parameter ignored.\n"); - return; - } if (num_Duplex > bd) { dplx = Duplex[bd]; e1000_validate_option(&dplx, &opt, adapter); diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c index b53b40ba88a8..d1e0563a67df 100644 --- a/drivers/net/e1000e/82571.c +++ b/drivers/net/e1000e/82571.c @@ -1803,7 +1803,7 @@ struct e1000_info e1000_82574_info = { | FLAG_HAS_AMT | FLAG_HAS_CTRLEXT_ON_LOAD, .pba = 20, - .max_hw_frame_size = ETH_FRAME_LEN + ETH_FCS_LEN, + .max_hw_frame_size = DEFAULT_JUMBO, .get_variants = e1000_get_variants_82571, .mac_ops = &e82571_mac_ops, .phy_ops = &e82_phy_ops_bm, @@ -1820,7 +1820,7 @@ struct e1000_info e1000_82583_info = { | FLAG_HAS_AMT | FLAG_HAS_CTRLEXT_ON_LOAD, .pba = 20, - .max_hw_frame_size = DEFAULT_JUMBO, + .max_hw_frame_size = ETH_FRAME_LEN + ETH_FCS_LEN, .get_variants = e1000_get_variants_82571, .mac_ops = &e82571_mac_ops, .phy_ops = &e82_phy_ops_bm, diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 16c193a6c95c..0687c6aa4e46 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -4982,12 +4982,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev, goto err_pci_reg; /* AER (Advanced Error Reporting) hooks */ - err = pci_enable_pcie_error_reporting(pdev); - if (err) { - dev_err(&pdev->dev, "pci_enable_pcie_error_reporting failed " - "0x%x\n", err); - /* non-fatal, continue */ - } + pci_enable_pcie_error_reporting(pdev); pci_set_master(pdev); /* PCI config space info */ @@ -5263,7 +5258,6 @@ static void __devexit e1000_remove(struct pci_dev *pdev) { struct net_device *netdev = pci_get_drvdata(pdev); struct e1000_adapter *adapter = netdev_priv(netdev); - int err; /* * flush_scheduled work may reschedule our watchdog task, so @@ -5299,10 +5293,7 @@ static void __devexit e1000_remove(struct pci_dev *pdev) free_netdev(netdev); /* AER disable */ - err = pci_disable_pcie_error_reporting(pdev); - if (err) - dev_err(&pdev->dev, - "pci_disable_pcie_error_reporting failed 0x%x\n", err); + pci_disable_pcie_error_reporting(pdev); pci_disable_device(pdev); } diff --git a/drivers/net/eql.c b/drivers/net/eql.c index d4d9a3eda695..f5b96cadeb25 100644 --- a/drivers/net/eql.c +++ b/drivers/net/eql.c @@ -111,6 +111,7 @@ * Sorry, I had to rewrite most of this for 2.5.x -DaveM */ +#include <linux/capability.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> diff --git a/drivers/net/ethoc.c b/drivers/net/ethoc.c index b7311bc00258..9c950bb5e90c 100644 --- a/drivers/net/ethoc.c +++ b/drivers/net/ethoc.c @@ -17,8 +17,13 @@ #include <linux/mii.h> #include <linux/phy.h> #include <linux/platform_device.h> +#include <linux/sched.h> #include <net/ethoc.h> +static int buffer_size = 0x8000; /* 32 KBytes */ +module_param(buffer_size, int, 0); +MODULE_PARM_DESC(buffer_size, "DMA buffer allocation size"); + /* register offsets */ #define MODER 0x00 #define INT_SOURCE 0x04 @@ -167,6 +172,7 @@ * struct ethoc - driver-private device structure * @iobase: pointer to I/O memory region * @membase: pointer to buffer memory region + * @dma_alloc: dma allocated buffer size * @num_tx: number of send buffers * @cur_tx: last send buffer written * @dty_tx: last buffer actually sent @@ -185,6 +191,7 @@ struct ethoc { void __iomem *iobase; void __iomem *membase; + int dma_alloc; unsigned int num_tx; unsigned int cur_tx; @@ -284,7 +291,7 @@ static int ethoc_init_ring(struct ethoc *dev) dev->cur_rx = 0; /* setup transmission buffers */ - bd.addr = 0; + bd.addr = virt_to_phys(dev->membase); bd.stat = TX_BD_IRQ | TX_BD_CRC; for (i = 0; i < dev->num_tx; i++) { @@ -295,7 +302,6 @@ static int ethoc_init_ring(struct ethoc *dev) bd.addr += ETHOC_BUFSIZ; } - bd.addr = dev->num_tx * ETHOC_BUFSIZ; bd.stat = RX_BD_EMPTY | RX_BD_IRQ; for (i = 0; i < dev->num_rx; i++) { @@ -400,8 +406,12 @@ static int ethoc_rx(struct net_device *dev, int limit) if (ethoc_update_rx_stats(priv, &bd) == 0) { int size = bd.stat >> 16; struct sk_buff *skb = netdev_alloc_skb(dev, size); + + size -= 4; /* strip the CRC */ + skb_reserve(skb, 2); /* align TCP/IP header */ + if (likely(skb)) { - void *src = priv->membase + bd.addr; + void *src = phys_to_virt(bd.addr); memcpy_fromio(skb_put(skb, size), src, size); skb->protocol = eth_type_trans(skb, dev); priv->stats.rx_packets++; @@ -653,9 +663,10 @@ static int ethoc_open(struct net_device *dev) if (ret) return ret; - /* calculate the number of TX/RX buffers */ - num_bd = (dev->mem_end - dev->mem_start + 1) / ETHOC_BUFSIZ; - priv->num_tx = min(min_tx, num_bd / 4); + /* calculate the number of TX/RX buffers, maximum 128 supported */ + num_bd = min_t(unsigned int, + 128, (dev->mem_end - dev->mem_start + 1) / ETHOC_BUFSIZ); + priv->num_tx = max(min_tx, num_bd / 4); priv->num_rx = num_bd - priv->num_tx; ethoc_write(priv, TX_BD_NUM, priv->num_tx); @@ -823,7 +834,7 @@ static netdev_tx_t ethoc_start_xmit(struct sk_buff *skb, struct net_device *dev) else bd.stat &= ~TX_BD_PAD; - dest = priv->membase + bd.addr; + dest = phys_to_virt(bd.addr); memcpy_toio(dest, skb->data, skb->len); bd.stat &= ~(TX_BD_STATS | TX_BD_LEN_MASK); @@ -903,22 +914,19 @@ static int ethoc_probe(struct platform_device *pdev) /* obtain buffer memory space */ res = platform_get_resource(pdev, IORESOURCE_MEM, 1); - if (!res) { - dev_err(&pdev->dev, "cannot obtain memory space\n"); - ret = -ENXIO; - goto free; - } - - mem = devm_request_mem_region(&pdev->dev, res->start, + if (res) { + mem = devm_request_mem_region(&pdev->dev, res->start, res->end - res->start + 1, res->name); - if (!mem) { - dev_err(&pdev->dev, "cannot request memory space\n"); - ret = -ENXIO; - goto free; + if (!mem) { + dev_err(&pdev->dev, "cannot request memory space\n"); + ret = -ENXIO; + goto free; + } + + netdev->mem_start = mem->start; + netdev->mem_end = mem->end; } - netdev->mem_start = mem->start; - netdev->mem_end = mem->end; /* obtain device IRQ number */ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); @@ -933,6 +941,7 @@ static int ethoc_probe(struct platform_device *pdev) /* setup driver-private data */ priv = netdev_priv(netdev); priv->netdev = netdev; + priv->dma_alloc = 0; priv->iobase = devm_ioremap_nocache(&pdev->dev, netdev->base_addr, mmio->end - mmio->start + 1); @@ -942,12 +951,27 @@ static int ethoc_probe(struct platform_device *pdev) goto error; } - priv->membase = devm_ioremap_nocache(&pdev->dev, netdev->mem_start, - mem->end - mem->start + 1); - if (!priv->membase) { - dev_err(&pdev->dev, "cannot remap memory space\n"); - ret = -ENXIO; - goto error; + if (netdev->mem_end) { + priv->membase = devm_ioremap_nocache(&pdev->dev, + netdev->mem_start, mem->end - mem->start + 1); + if (!priv->membase) { + dev_err(&pdev->dev, "cannot remap memory space\n"); + ret = -ENXIO; + goto error; + } + } else { + /* Allocate buffer memory */ + priv->membase = dma_alloc_coherent(NULL, + buffer_size, (void *)&netdev->mem_start, + GFP_KERNEL); + if (!priv->membase) { + dev_err(&pdev->dev, "cannot allocate %dB buffer\n", + buffer_size); + ret = -ENOMEM; + goto error; + } + netdev->mem_end = netdev->mem_start + buffer_size; + priv->dma_alloc = buffer_size; } /* Allow the platform setup code to pass in a MAC address. */ @@ -1034,6 +1058,9 @@ free_mdio: kfree(priv->mdio->irq); mdiobus_free(priv->mdio); free: + if (priv->dma_alloc) + dma_free_coherent(NULL, priv->dma_alloc, priv->membase, + netdev->mem_start); free_netdev(netdev); out: return ret; @@ -1059,7 +1086,9 @@ static int ethoc_remove(struct platform_device *pdev) kfree(priv->mdio->irq); mdiobus_free(priv->mdio); } - + if (priv->dma_alloc) + dma_free_coherent(NULL, priv->dma_alloc, priv->membase, + netdev->mem_start); unregister_netdev(netdev); free_netdev(netdev); } diff --git a/drivers/net/ewrk3.c b/drivers/net/ewrk3.c index b2a5ec8f3721..dd4ba01fd92d 100644 --- a/drivers/net/ewrk3.c +++ b/drivers/net/ewrk3.c @@ -145,6 +145,7 @@ #include <linux/module.h> #include <linux/kernel.h> +#include <linux/sched.h> #include <linux/string.h> #include <linux/errno.h> #include <linux/ioport.h> diff --git a/drivers/net/fec_mpc52xx.c b/drivers/net/fec_mpc52xx.c index c40113f58963..66dace6d324f 100644 --- a/drivers/net/fec_mpc52xx.c +++ b/drivers/net/fec_mpc52xx.c @@ -759,12 +759,6 @@ static void mpc52xx_fec_reset(struct net_device *dev) mpc52xx_fec_hw_init(dev); - if (priv->phydev) { - phy_stop(priv->phydev); - phy_write(priv->phydev, MII_BMCR, BMCR_RESET); - phy_start(priv->phydev); - } - bcom_fec_rx_reset(priv->rx_dmatsk); bcom_fec_tx_reset(priv->tx_dmatsk); diff --git a/drivers/net/fec_mpc52xx_phy.c b/drivers/net/fec_mpc52xx_phy.c index 31e6d62b785d..ee0f3c6d3f88 100644 --- a/drivers/net/fec_mpc52xx_phy.c +++ b/drivers/net/fec_mpc52xx_phy.c @@ -155,6 +155,7 @@ static struct of_device_id mpc52xx_fec_mdio_match[] = { { .compatible = "mpc5200b-fec-phy", }, {} }; +MODULE_DEVICE_TABLE(of, mpc52xx_fec_mdio_match); struct of_platform_driver mpc52xx_fec_mdio_driver = { .name = "mpc5200b-fec-phy", diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index 0a1c2bb27d4d..e1da4666f204 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -49,6 +49,7 @@ #include <linux/netdevice.h> #include <linux/etherdevice.h> #include <linux/delay.h> +#include <linux/sched.h> #include <linux/spinlock.h> #include <linux/ethtool.h> #include <linux/timer.h> diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c index 2bc2d2b20644..ec2f5034457f 100644 --- a/drivers/net/fs_enet/fs_enet-main.c +++ b/drivers/net/fs_enet/fs_enet-main.c @@ -1110,6 +1110,7 @@ static struct of_device_id fs_enet_match[] = { #endif {} }; +MODULE_DEVICE_TABLE(of, fs_enet_match); static struct of_platform_driver fs_enet_driver = { .name = "fs_enet", diff --git a/drivers/net/fs_enet/mii-bitbang.c b/drivers/net/fs_enet/mii-bitbang.c index 93b481b0e3c7..24ff9f43a62b 100644 --- a/drivers/net/fs_enet/mii-bitbang.c +++ b/drivers/net/fs_enet/mii-bitbang.c @@ -221,6 +221,7 @@ static struct of_device_id fs_enet_mdio_bb_match[] = { }, {}, }; +MODULE_DEVICE_TABLE(of, fs_enet_mdio_bb_match); static struct of_platform_driver fs_enet_bb_mdio_driver = { .name = "fsl-bb-mdio", diff --git a/drivers/net/fs_enet/mii-fec.c b/drivers/net/fs_enet/mii-fec.c index a2d69c1cd07e..96eba4280c5c 100644 --- a/drivers/net/fs_enet/mii-fec.c +++ b/drivers/net/fs_enet/mii-fec.c @@ -219,6 +219,7 @@ static struct of_device_id fs_enet_mdio_fec_match[] = { #endif {}, }; +MODULE_DEVICE_TABLE(of, fs_enet_mdio_fec_match); static struct of_platform_driver fs_enet_fec_mdio_driver = { .name = "fsl-fec-mdio", diff --git a/drivers/net/fsl_pq_mdio.c b/drivers/net/fsl_pq_mdio.c index d167090248e2..6ac464866972 100644 --- a/drivers/net/fsl_pq_mdio.c +++ b/drivers/net/fsl_pq_mdio.c @@ -407,6 +407,7 @@ static struct of_device_id fsl_pq_mdio_match[] = { }, {}, }; +MODULE_DEVICE_TABLE(of, fsl_pq_mdio_match); static struct of_platform_driver fsl_pq_mdio_driver = { .name = "fsl-pq_mdio", diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index 1e5289ffef6f..5bf31f1509c9 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -2325,9 +2325,6 @@ static irqreturn_t gfar_error(int irq, void *dev_id) return IRQ_HANDLED; } -/* work with hotplug and coldplug */ -MODULE_ALIAS("platform:fsl-gianfar"); - static struct of_device_id gfar_match[] = { { @@ -2336,6 +2333,7 @@ static struct of_device_id gfar_match[] = }, {}, }; +MODULE_DEVICE_TABLE(of, gfar_match); /* Structure for a device driver */ static struct of_platform_driver gfar_driver = { diff --git a/drivers/net/hamachi.c b/drivers/net/hamachi.c index 1d5064a09aca..f7519a594945 100644 --- a/drivers/net/hamachi.c +++ b/drivers/net/hamachi.c @@ -145,6 +145,7 @@ static int tx_params[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1}; /* Time in jiffies before concluding the transmitter is hung. */ #define TX_TIMEOUT (5*HZ) +#include <linux/capability.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/string.h> diff --git a/drivers/net/hamradio/baycom_epp.c b/drivers/net/hamradio/baycom_epp.c index 7bcaf7c66243..e344c84c0ef9 100644 --- a/drivers/net/hamradio/baycom_epp.c +++ b/drivers/net/hamradio/baycom_epp.c @@ -44,6 +44,7 @@ #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> +#include <linux/sched.h> #include <linux/string.h> #include <linux/workqueue.h> #include <linux/fs.h> diff --git a/drivers/net/hamradio/baycom_ser_fdx.c b/drivers/net/hamradio/baycom_ser_fdx.c index aa4488e871b2..ed60fd664273 100644 --- a/drivers/net/hamradio/baycom_ser_fdx.c +++ b/drivers/net/hamradio/baycom_ser_fdx.c @@ -71,6 +71,7 @@ /*****************************************************************************/ +#include <linux/capability.h> #include <linux/module.h> #include <linux/ioport.h> #include <linux/string.h> diff --git a/drivers/net/hamradio/baycom_ser_hdx.c b/drivers/net/hamradio/baycom_ser_hdx.c index 88c593596020..1686f6dcbbce 100644 --- a/drivers/net/hamradio/baycom_ser_hdx.c +++ b/drivers/net/hamradio/baycom_ser_hdx.c @@ -61,6 +61,7 @@ /*****************************************************************************/ +#include <linux/capability.h> #include <linux/module.h> #include <linux/ioport.h> #include <linux/string.h> diff --git a/drivers/net/hamradio/hdlcdrv.c b/drivers/net/hamradio/hdlcdrv.c index 0013c409782c..91c5790c9581 100644 --- a/drivers/net/hamradio/hdlcdrv.c +++ b/drivers/net/hamradio/hdlcdrv.c @@ -42,6 +42,7 @@ /*****************************************************************************/ +#include <linux/capability.h> #include <linux/module.h> #include <linux/types.h> #include <linux/net.h> diff --git a/drivers/net/hamradio/mkiss.c b/drivers/net/hamradio/mkiss.c index 33b55f729742..db4b7f1603f6 100644 --- a/drivers/net/hamradio/mkiss.c +++ b/drivers/net/hamradio/mkiss.c @@ -258,7 +258,7 @@ static void ax_bump(struct mkiss *ax) } if (ax->crcmode != CRC_MODE_SMACK && ax->crcauto) { printk(KERN_INFO - "mkiss: %s: Switchting to crc-smack\n", + "mkiss: %s: Switching to crc-smack\n", ax->dev->name); ax->crcmode = CRC_MODE_SMACK; } @@ -272,7 +272,7 @@ static void ax_bump(struct mkiss *ax) } if (ax->crcmode != CRC_MODE_FLEX && ax->crcauto) { printk(KERN_INFO - "mkiss: %s: Switchting to crc-flexnet\n", + "mkiss: %s: Switching to crc-flexnet\n", ax->dev->name); ax->crcmode = CRC_MODE_FLEX; } diff --git a/drivers/net/hp100.c b/drivers/net/hp100.c index a9a1a99f02dd..dd8665138062 100644 --- a/drivers/net/hp100.c +++ b/drivers/net/hp100.c @@ -98,6 +98,7 @@ #include <linux/module.h> #include <linux/kernel.h> +#include <linux/sched.h> #include <linux/string.h> #include <linux/errno.h> #include <linux/ioport.h> diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c index 89c82c5e63e4..3fae87559791 100644 --- a/drivers/net/ibm_newemac/core.c +++ b/drivers/net/ibm_newemac/core.c @@ -24,6 +24,7 @@ * */ +#include <linux/module.h> #include <linux/sched.h> #include <linux/string.h> #include <linux/errno.h> @@ -443,7 +444,7 @@ static u32 __emac_calc_base_mr1(struct emac_instance *dev, int tx_size, int rx_s ret |= EMAC_MR1_TFS_2K; break; default: - printk(KERN_WARNING "%s: Unknown Rx FIFO size %d\n", + printk(KERN_WARNING "%s: Unknown Tx FIFO size %d\n", dev->ndev->name, tx_size); } @@ -470,6 +471,9 @@ static u32 __emac4_calc_base_mr1(struct emac_instance *dev, int tx_size, int rx_ DBG2(dev, "__emac4_calc_base_mr1" NL); switch(tx_size) { + case 16384: + ret |= EMAC4_MR1_TFS_16K; + break; case 4096: ret |= EMAC4_MR1_TFS_4K; break; @@ -477,7 +481,7 @@ static u32 __emac4_calc_base_mr1(struct emac_instance *dev, int tx_size, int rx_ ret |= EMAC4_MR1_TFS_2K; break; default: - printk(KERN_WARNING "%s: Unknown Rx FIFO size %d\n", + printk(KERN_WARNING "%s: Unknown Tx FIFO size %d\n", dev->ndev->name, tx_size); } @@ -2985,6 +2989,7 @@ static struct of_device_id emac_match[] = }, {}, }; +MODULE_DEVICE_TABLE(of, emac_match); static struct of_platform_driver emac_driver = { .name = "emac", diff --git a/drivers/net/ibm_newemac/emac.h b/drivers/net/ibm_newemac/emac.h index 0afc2cf5c52b..d34adf99fc6a 100644 --- a/drivers/net/ibm_newemac/emac.h +++ b/drivers/net/ibm_newemac/emac.h @@ -153,6 +153,7 @@ struct emac_regs { #define EMAC4_MR1_RFS_16K 0x00280000 #define EMAC4_MR1_TFS_2K 0x00020000 #define EMAC4_MR1_TFS_4K 0x00030000 +#define EMAC4_MR1_TFS_16K 0x00050000 #define EMAC4_MR1_TR 0x00008000 #define EMAC4_MR1_MWSW_001 0x00001000 #define EMAC4_MR1_JPSM 0x00000800 diff --git a/drivers/net/igb/igb_ethtool.c b/drivers/net/igb/igb_ethtool.c index d004c359244c..deaea8fa1032 100644 --- a/drivers/net/igb/igb_ethtool.c +++ b/drivers/net/igb/igb_ethtool.c @@ -34,6 +34,7 @@ #include <linux/interrupt.h> #include <linux/if_ether.h> #include <linux/ethtool.h> +#include <linux/sched.h> #include "igb.h" diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index 5d6c1530a8c0..714c3a4a44ef 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -1246,12 +1246,7 @@ static int __devinit igb_probe(struct pci_dev *pdev, if (err) goto err_pci_reg; - err = pci_enable_pcie_error_reporting(pdev); - if (err) { - dev_err(&pdev->dev, "pci_enable_pcie_error_reporting failed " - "0x%x\n", err); - /* non-fatal, continue */ - } + pci_enable_pcie_error_reporting(pdev); pci_set_master(pdev); pci_save_state(pdev); @@ -1628,7 +1623,6 @@ static void __devexit igb_remove(struct pci_dev *pdev) struct net_device *netdev = pci_get_drvdata(pdev); struct igb_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; - int err; /* flush_scheduled work may reschedule our watchdog task, so * explicitly disable watchdog tasks from being rescheduled */ @@ -1682,10 +1676,7 @@ static void __devexit igb_remove(struct pci_dev *pdev) free_netdev(netdev); - err = pci_disable_pcie_error_reporting(pdev); - if (err) - dev_err(&pdev->dev, - "pci_disable_pcie_error_reporting failed 0x%x\n", err); + pci_disable_pcie_error_reporting(pdev); pci_disable_device(pdev); } diff --git a/drivers/net/irda/sa1100_ir.c b/drivers/net/irda/sa1100_ir.c index 38bf7cf2256d..c412e8026173 100644 --- a/drivers/net/irda/sa1100_ir.c +++ b/drivers/net/irda/sa1100_ir.c @@ -232,8 +232,11 @@ static int sa1100_irda_startup(struct sa1100_irda *si) /* * Ensure that the ports for this device are setup correctly. */ - if (si->pdata->startup) - si->pdata->startup(si->dev); + if (si->pdata->startup) { + ret = si->pdata->startup(si->dev); + if (ret) + return ret; + } /* * Configure PPC for IRDA - we want to drive TXD2 low. diff --git a/drivers/net/irda/toim3232-sir.c b/drivers/net/irda/toim3232-sir.c index fcf287b749db..99e1ec02a011 100644 --- a/drivers/net/irda/toim3232-sir.c +++ b/drivers/net/irda/toim3232-sir.c @@ -120,6 +120,7 @@ #include <linux/module.h> #include <linux/delay.h> #include <linux/init.h> +#include <linux/sched.h> #include <net/irda/irda.h> diff --git a/drivers/net/iseries_veth.c b/drivers/net/iseries_veth.c index e36e951cbc65..aa7286bc4364 100644 --- a/drivers/net/iseries_veth.c +++ b/drivers/net/iseries_veth.c @@ -495,7 +495,7 @@ static void veth_take_cap_ack(struct veth_lpar_connection *cnx, cnx->remote_lp); } else { memcpy(&cnx->cap_ack_event, event, - sizeof(&cnx->cap_ack_event)); + sizeof(cnx->cap_ack_event)); cnx->state |= VETH_STATE_GOTCAPACK; veth_kick_statemachine(cnx); } diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c index 56b12f3192f1..e2d5343f1275 100644 --- a/drivers/net/ixgbe/ixgbe_82598.c +++ b/drivers/net/ixgbe/ixgbe_82598.c @@ -425,7 +425,7 @@ static s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw, s32 packetbuf_num) #endif /* CONFIG_DCB */ default: hw_dbg(hw, "Flow control param set incorrectly\n"); - ret_val = -IXGBE_ERR_CONFIG; + ret_val = IXGBE_ERR_CONFIG; goto out; break; } diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c index 2ec58dcdb82b..34b04924c8a1 100644 --- a/drivers/net/ixgbe/ixgbe_82599.c +++ b/drivers/net/ixgbe/ixgbe_82599.c @@ -330,6 +330,8 @@ static enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw) switch (hw->device_id) { case IXGBE_DEV_ID_82599_KX4: + case IXGBE_DEV_ID_82599_KX4_MEZZ: + case IXGBE_DEV_ID_82599_COMBO_BACKPLANE: case IXGBE_DEV_ID_82599_XAUI_LOM: /* Default device ID is mezzanine card KX/KX4 */ media_type = ixgbe_media_type_backplane; diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c index 6621e172df3d..40ff120a9ad4 100644 --- a/drivers/net/ixgbe/ixgbe_common.c +++ b/drivers/net/ixgbe/ixgbe_common.c @@ -1355,9 +1355,7 @@ static void ixgbe_add_uc_addr(struct ixgbe_hw *hw, u8 *addr, u32 vmdq) /** * ixgbe_update_uc_addr_list_generic - Updates MAC list of secondary addresses * @hw: pointer to hardware structure - * @addr_list: the list of new addresses - * @addr_count: number of addresses - * @next: iterator function to walk the address list + * @uc_list: the list of new addresses * * The given list replaces any existing list. Clears the secondary addrs from * receive address registers. Uses unused receive address registers for the @@ -1663,7 +1661,7 @@ s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw, s32 packetbuf_num) #endif /* CONFIG_DCB */ default: hw_dbg(hw, "Flow control param set incorrectly\n"); - ret_val = -IXGBE_ERR_CONFIG; + ret_val = IXGBE_ERR_CONFIG; goto out; break; } @@ -1734,75 +1732,140 @@ s32 ixgbe_fc_autoneg(struct ixgbe_hw *hw) s32 ret_val = 0; ixgbe_link_speed speed; u32 pcs_anadv_reg, pcs_lpab_reg, linkstat; + u32 links2, anlp1_reg, autoc_reg, links; bool link_up; /* * AN should have completed when the cable was plugged in. * Look for reasons to bail out. Bail out if: * - FC autoneg is disabled, or if - * - we don't have multispeed fiber, or if - * - we're not running at 1G, or if - * - link is not up, or if - * - link is up but AN did not complete, or if - * - link is up and AN completed but timed out + * - link is not up. * - * Since we're being called from an LSC, link is already know to be up. + * Since we're being called from an LSC, link is already known to be up. * So use link_up_wait_to_complete=false. */ hw->mac.ops.check_link(hw, &speed, &link_up, false); - linkstat = IXGBE_READ_REG(hw, IXGBE_PCS1GLSTA); - - if (hw->fc.disable_fc_autoneg || - !hw->phy.multispeed_fiber || - (speed != IXGBE_LINK_SPEED_1GB_FULL) || - !link_up || - ((linkstat & IXGBE_PCS1GLSTA_AN_COMPLETE) == 0) || - ((linkstat & IXGBE_PCS1GLSTA_AN_TIMED_OUT) == 1)) { + + if (hw->fc.disable_fc_autoneg || (!link_up)) { hw->fc.fc_was_autonegged = false; hw->fc.current_mode = hw->fc.requested_mode; - hw_dbg(hw, "Autoneg FC was skipped.\n"); goto out; } /* + * On backplane, bail out if + * - backplane autoneg was not completed, or if + * - link partner is not AN enabled + */ + if (hw->phy.media_type == ixgbe_media_type_backplane) { + links = IXGBE_READ_REG(hw, IXGBE_LINKS); + links2 = IXGBE_READ_REG(hw, IXGBE_LINKS2); + if (((links & IXGBE_LINKS_KX_AN_COMP) == 0) || + ((links2 & IXGBE_LINKS2_AN_SUPPORTED) == 0)) { + hw->fc.fc_was_autonegged = false; + hw->fc.current_mode = hw->fc.requested_mode; + goto out; + } + } + + /* + * On multispeed fiber at 1g, bail out if + * - link is up but AN did not complete, or if + * - link is up and AN completed but timed out + */ + if (hw->phy.multispeed_fiber && (speed == IXGBE_LINK_SPEED_1GB_FULL)) { + linkstat = IXGBE_READ_REG(hw, IXGBE_PCS1GLSTA); + if (((linkstat & IXGBE_PCS1GLSTA_AN_COMPLETE) == 0) || + ((linkstat & IXGBE_PCS1GLSTA_AN_TIMED_OUT) == 1)) { + hw->fc.fc_was_autonegged = false; + hw->fc.current_mode = hw->fc.requested_mode; + goto out; + } + } + + /* * Read the AN advertisement and LP ability registers and resolve * local flow control settings accordingly */ - pcs_anadv_reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANA); - pcs_lpab_reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANLP); - if ((pcs_anadv_reg & IXGBE_PCS1GANA_SYM_PAUSE) && - (pcs_lpab_reg & IXGBE_PCS1GANA_SYM_PAUSE)) { + if ((speed == IXGBE_LINK_SPEED_1GB_FULL) && + (hw->phy.media_type != ixgbe_media_type_backplane)) { + pcs_anadv_reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANA); + pcs_lpab_reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANLP); + if ((pcs_anadv_reg & IXGBE_PCS1GANA_SYM_PAUSE) && + (pcs_lpab_reg & IXGBE_PCS1GANA_SYM_PAUSE)) { + /* + * Now we need to check if the user selected Rx ONLY + * of pause frames. In this case, we had to advertise + * FULL flow control because we could not advertise RX + * ONLY. Hence, we must now check to see if we need to + * turn OFF the TRANSMISSION of PAUSE frames. + */ + if (hw->fc.requested_mode == ixgbe_fc_full) { + hw->fc.current_mode = ixgbe_fc_full; + hw_dbg(hw, "Flow Control = FULL.\n"); + } else { + hw->fc.current_mode = ixgbe_fc_rx_pause; + hw_dbg(hw, "Flow Control=RX PAUSE only\n"); + } + } else if (!(pcs_anadv_reg & IXGBE_PCS1GANA_SYM_PAUSE) && + (pcs_anadv_reg & IXGBE_PCS1GANA_ASM_PAUSE) && + (pcs_lpab_reg & IXGBE_PCS1GANA_SYM_PAUSE) && + (pcs_lpab_reg & IXGBE_PCS1GANA_ASM_PAUSE)) { + hw->fc.current_mode = ixgbe_fc_tx_pause; + hw_dbg(hw, "Flow Control = TX PAUSE frames only.\n"); + } else if ((pcs_anadv_reg & IXGBE_PCS1GANA_SYM_PAUSE) && + (pcs_anadv_reg & IXGBE_PCS1GANA_ASM_PAUSE) && + !(pcs_lpab_reg & IXGBE_PCS1GANA_SYM_PAUSE) && + (pcs_lpab_reg & IXGBE_PCS1GANA_ASM_PAUSE)) { + hw->fc.current_mode = ixgbe_fc_rx_pause; + hw_dbg(hw, "Flow Control = RX PAUSE frames only.\n"); + } else { + hw->fc.current_mode = ixgbe_fc_none; + hw_dbg(hw, "Flow Control = NONE.\n"); + } + } + + if (hw->phy.media_type == ixgbe_media_type_backplane) { /* - * Now we need to check if the user selected Rx ONLY - * of pause frames. In this case, we had to advertise - * FULL flow control because we could not advertise RX - * ONLY. Hence, we must now check to see if we need to - * turn OFF the TRANSMISSION of PAUSE frames. + * Read the 10g AN autoc and LP ability registers and resolve + * local flow control settings accordingly */ - if (hw->fc.requested_mode == ixgbe_fc_full) { - hw->fc.current_mode = ixgbe_fc_full; - hw_dbg(hw, "Flow Control = FULL.\n"); - } else { + autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); + anlp1_reg = IXGBE_READ_REG(hw, IXGBE_ANLP1); + + if ((autoc_reg & IXGBE_AUTOC_SYM_PAUSE) && + (anlp1_reg & IXGBE_ANLP1_SYM_PAUSE)) { + /* + * Now we need to check if the user selected Rx ONLY + * of pause frames. In this case, we had to advertise + * FULL flow control because we could not advertise RX + * ONLY. Hence, we must now check to see if we need to + * turn OFF the TRANSMISSION of PAUSE frames. + */ + if (hw->fc.requested_mode == ixgbe_fc_full) { + hw->fc.current_mode = ixgbe_fc_full; + hw_dbg(hw, "Flow Control = FULL.\n"); + } else { + hw->fc.current_mode = ixgbe_fc_rx_pause; + hw_dbg(hw, "Flow Control=RX PAUSE only\n"); + } + } else if (!(autoc_reg & IXGBE_AUTOC_SYM_PAUSE) && + (autoc_reg & IXGBE_AUTOC_ASM_PAUSE) && + (anlp1_reg & IXGBE_ANLP1_SYM_PAUSE) && + (anlp1_reg & IXGBE_ANLP1_ASM_PAUSE)) { + hw->fc.current_mode = ixgbe_fc_tx_pause; + hw_dbg(hw, "Flow Control = TX PAUSE frames only.\n"); + } else if ((autoc_reg & IXGBE_AUTOC_SYM_PAUSE) && + (autoc_reg & IXGBE_AUTOC_ASM_PAUSE) && + !(anlp1_reg & IXGBE_ANLP1_SYM_PAUSE) && + (anlp1_reg & IXGBE_ANLP1_ASM_PAUSE)) { hw->fc.current_mode = ixgbe_fc_rx_pause; hw_dbg(hw, "Flow Control = RX PAUSE frames only.\n"); + } else { + hw->fc.current_mode = ixgbe_fc_none; + hw_dbg(hw, "Flow Control = NONE.\n"); } - } else if (!(pcs_anadv_reg & IXGBE_PCS1GANA_SYM_PAUSE) && - (pcs_anadv_reg & IXGBE_PCS1GANA_ASM_PAUSE) && - (pcs_lpab_reg & IXGBE_PCS1GANA_SYM_PAUSE) && - (pcs_lpab_reg & IXGBE_PCS1GANA_ASM_PAUSE)) { - hw->fc.current_mode = ixgbe_fc_tx_pause; - hw_dbg(hw, "Flow Control = TX PAUSE frames only.\n"); - } else if ((pcs_anadv_reg & IXGBE_PCS1GANA_SYM_PAUSE) && - (pcs_anadv_reg & IXGBE_PCS1GANA_ASM_PAUSE) && - !(pcs_lpab_reg & IXGBE_PCS1GANA_SYM_PAUSE) && - (pcs_lpab_reg & IXGBE_PCS1GANA_ASM_PAUSE)) { - hw->fc.current_mode = ixgbe_fc_rx_pause; - hw_dbg(hw, "Flow Control = RX PAUSE frames only.\n"); - } else { - hw->fc.current_mode = ixgbe_fc_none; - hw_dbg(hw, "Flow Control = NONE.\n"); } - /* Record that current_mode is the result of a successful autoneg */ hw->fc.fc_was_autonegged = true; @@ -1919,7 +1982,7 @@ static s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num) #endif /* CONFIG_DCB */ default: hw_dbg(hw, "Flow control param set incorrectly\n"); - ret_val = -IXGBE_ERR_CONFIG; + ret_val = IXGBE_ERR_CONFIG; goto out; break; } @@ -1927,9 +1990,6 @@ static s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num) IXGBE_WRITE_REG(hw, IXGBE_PCS1GANA, reg); reg = IXGBE_READ_REG(hw, IXGBE_PCS1GLCTL); - /* Enable and restart autoneg to inform the link partner */ - reg |= IXGBE_PCS1GLCTL_AN_ENABLE | IXGBE_PCS1GLCTL_AN_RESTART; - /* Disable AN timeout */ if (hw->fc.strict_ieee) reg &= ~IXGBE_PCS1GLCTL_AN_1G_TIMEOUT_EN; @@ -1937,6 +1997,70 @@ static s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num) IXGBE_WRITE_REG(hw, IXGBE_PCS1GLCTL, reg); hw_dbg(hw, "Set up FC; PCS1GLCTL = 0x%08X\n", reg); + /* + * Set up the 10G flow control advertisement registers so the HW + * can do fc autoneg once the cable is plugged in. If we end up + * using 1g instead, this is harmless. + */ + reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); + + /* + * The possible values of fc.requested_mode are: + * 0: Flow control is completely disabled + * 1: Rx flow control is enabled (we can receive pause frames, + * but not send pause frames). + * 2: Tx flow control is enabled (we can send pause frames but + * we do not support receiving pause frames). + * 3: Both Rx and Tx flow control (symmetric) are enabled. + * other: Invalid. + */ + switch (hw->fc.requested_mode) { + case ixgbe_fc_none: + /* Flow control completely disabled by software override. */ + reg &= ~(IXGBE_AUTOC_SYM_PAUSE | IXGBE_AUTOC_ASM_PAUSE); + break; + case ixgbe_fc_rx_pause: + /* + * Rx Flow control is enabled and Tx Flow control is + * disabled by software override. Since there really + * isn't a way to advertise that we are capable of RX + * Pause ONLY, we will advertise that we support both + * symmetric and asymmetric Rx PAUSE. Later, we will + * disable the adapter's ability to send PAUSE frames. + */ + reg |= (IXGBE_AUTOC_SYM_PAUSE | IXGBE_AUTOC_ASM_PAUSE); + break; + case ixgbe_fc_tx_pause: + /* + * Tx Flow control is enabled, and Rx Flow control is + * disabled by software override. + */ + reg |= (IXGBE_AUTOC_ASM_PAUSE); + reg &= ~(IXGBE_AUTOC_SYM_PAUSE); + break; + case ixgbe_fc_full: + /* Flow control (both Rx and Tx) is enabled by SW override. */ + reg |= (IXGBE_AUTOC_SYM_PAUSE | IXGBE_AUTOC_ASM_PAUSE); + break; +#ifdef CONFIG_DCB + case ixgbe_fc_pfc: + goto out; + break; +#endif /* CONFIG_DCB */ + default: + hw_dbg(hw, "Flow control param set incorrectly\n"); + ret_val = IXGBE_ERR_CONFIG; + goto out; + break; + } + /* + * AUTOC restart handles negotiation of 1G and 10G. There is + * no need to set the PCS1GCTL register. + */ + reg |= IXGBE_AUTOC_AN_RESTART; + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, reg); + hw_dbg(hw, "Set up FC; IXGBE_AUTOC = 0x%08X\n", reg); + out: return ret_val; } @@ -2000,7 +2124,7 @@ s32 ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u16 mask) while (timeout) { if (ixgbe_get_eeprom_semaphore(hw)) - return -IXGBE_ERR_SWFW_SYNC; + return IXGBE_ERR_SWFW_SYNC; gssr = IXGBE_READ_REG(hw, IXGBE_GSSR); if (!(gssr & (fwmask | swmask))) @@ -2017,7 +2141,7 @@ s32 ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u16 mask) if (!timeout) { hw_dbg(hw, "Driver can't access resource, GSSR timeout.\n"); - return -IXGBE_ERR_SWFW_SYNC; + return IXGBE_ERR_SWFW_SYNC; } gssr |= swmask; diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c index 53b0a6680254..fa314cb005a4 100644 --- a/drivers/net/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ixgbe/ixgbe_ethtool.c @@ -53,6 +53,10 @@ static struct ixgbe_stats ixgbe_gstrings_stats[] = { {"tx_packets", IXGBE_STAT(net_stats.tx_packets)}, {"rx_bytes", IXGBE_STAT(net_stats.rx_bytes)}, {"tx_bytes", IXGBE_STAT(net_stats.tx_bytes)}, + {"rx_pkts_nic", IXGBE_STAT(stats.gprc)}, + {"tx_pkts_nic", IXGBE_STAT(stats.gptc)}, + {"rx_bytes_nic", IXGBE_STAT(stats.gorc)}, + {"tx_bytes_nic", IXGBE_STAT(stats.gotc)}, {"lsc_int", IXGBE_STAT(lsc_int)}, {"tx_busy", IXGBE_STAT(tx_busy)}, {"non_eop_descs", IXGBE_STAT(non_eop_descs)}, diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index c407bd9de0dd..cbb143ca1eb8 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -49,7 +49,7 @@ char ixgbe_driver_name[] = "ixgbe"; static const char ixgbe_driver_string[] = "Intel(R) 10 Gigabit PCI Express Network Driver"; -#define DRV_VERSION "2.0.37-k2" +#define DRV_VERSION "2.0.44-k2" const char ixgbe_driver_version[] = DRV_VERSION; static char ixgbe_copyright[] = "Copyright (c) 1999-2009 Intel Corporation."; @@ -97,8 +97,12 @@ static struct pci_device_id ixgbe_pci_tbl[] = { board_82599 }, {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP), board_82599 }, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_KX4_MEZZ), + board_82599 }, {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_CX4), board_82599 }, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_COMBO_BACKPLANE), + board_82599 }, /* required last entry */ {0, } @@ -1885,12 +1889,29 @@ static void ixgbe_configure_tx(struct ixgbe_adapter *adapter) IXGBE_WRITE_REG(hw, IXGBE_TDT(j), 0); adapter->tx_ring[i].head = IXGBE_TDH(j); adapter->tx_ring[i].tail = IXGBE_TDT(j); - /* Disable Tx Head Writeback RO bit, since this hoses + /* + * Disable Tx Head Writeback RO bit, since this hoses * bookkeeping if things aren't delivered in order. */ - txctrl = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(j)); + switch (hw->mac.type) { + case ixgbe_mac_82598EB: + txctrl = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(j)); + break; + case ixgbe_mac_82599EB: + default: + txctrl = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL_82599(j)); + break; + } txctrl &= ~IXGBE_DCA_TXCTRL_TX_WB_RO_EN; - IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(j), txctrl); + switch (hw->mac.type) { + case ixgbe_mac_82598EB: + IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(j), txctrl); + break; + case ixgbe_mac_82599EB: + default: + IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL_82599(j), txctrl); + break; + } } if (hw->mac.type == ixgbe_mac_82599EB) { /* We enable 8 traffic classes, DCB only */ @@ -4432,10 +4453,13 @@ void ixgbe_update_stats(struct ixgbe_adapter *adapter) /* 82598 hardware only has a 32 bit counter in the high register */ if (hw->mac.type == ixgbe_mac_82599EB) { + u64 tmp; adapter->stats.gorc += IXGBE_READ_REG(hw, IXGBE_GORCL); - IXGBE_READ_REG(hw, IXGBE_GORCH); /* to clear */ + tmp = IXGBE_READ_REG(hw, IXGBE_GORCH) & 0xF; /* 4 high bits of GORC */ + adapter->stats.gorc += (tmp << 32); adapter->stats.gotc += IXGBE_READ_REG(hw, IXGBE_GOTCL); - IXGBE_READ_REG(hw, IXGBE_GOTCH); /* to clear */ + tmp = IXGBE_READ_REG(hw, IXGBE_GOTCH) & 0xF; /* 4 high bits of GOTC */ + adapter->stats.gotc += (tmp << 32); adapter->stats.tor += IXGBE_READ_REG(hw, IXGBE_TORL); IXGBE_READ_REG(hw, IXGBE_TORH); /* to clear */ adapter->stats.lxonrxc += IXGBE_READ_REG(hw, IXGBE_LXONRXCNT); @@ -5071,7 +5095,6 @@ static void ixgbe_atr(struct ixgbe_adapter *adapter, struct sk_buff *skb, /* Right now, we support IPv4 only */ struct ixgbe_atr_input atr_input; struct tcphdr *th; - struct udphdr *uh; struct iphdr *iph = ip_hdr(skb); struct ethhdr *eth = (struct ethhdr *)skb->data; u16 vlan_id, src_port, dst_port, flex_bytes; @@ -5085,12 +5108,6 @@ static void ixgbe_atr(struct ixgbe_adapter *adapter, struct sk_buff *skb, dst_port = th->dest; l4type |= IXGBE_ATR_L4TYPE_TCP; /* l4type IPv4 type is 0, no need to assign */ - } else if(iph->protocol == IPPROTO_UDP) { - uh = udp_hdr(skb); - src_port = uh->source; - dst_port = uh->dest; - l4type |= IXGBE_ATR_L4TYPE_UDP; - /* l4type IPv4 type is 0, no need to assign */ } else { /* Unsupported L4 header, just bail here */ return; @@ -5494,12 +5511,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, goto err_pci_reg; } - err = pci_enable_pcie_error_reporting(pdev); - if (err) { - dev_err(&pdev->dev, "pci_enable_pcie_error_reporting failed " - "0x%x\n", err); - /* non-fatal, continue */ - } + pci_enable_pcie_error_reporting(pdev); pci_set_master(pdev); pci_save_state(pdev); @@ -5808,7 +5820,6 @@ static void __devexit ixgbe_remove(struct pci_dev *pdev) { struct net_device *netdev = pci_get_drvdata(pdev); struct ixgbe_adapter *adapter = netdev_priv(netdev); - int err; set_bit(__IXGBE_DOWN, &adapter->state); /* clear the module not found bit to make sure the worker won't @@ -5859,10 +5870,7 @@ static void __devexit ixgbe_remove(struct pci_dev *pdev) free_netdev(netdev); - err = pci_disable_pcie_error_reporting(pdev); - if (err) - dev_err(&pdev->dev, - "pci_disable_pcie_error_reporting failed 0x%x\n", err); + pci_disable_pcie_error_reporting(pdev); pci_disable_device(pdev); } diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h index 8761d7899f7d..ef4bdd58e016 100644 --- a/drivers/net/ixgbe/ixgbe_type.h +++ b/drivers/net/ixgbe/ixgbe_type.h @@ -49,9 +49,11 @@ #define IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM 0x10E1 #define IXGBE_DEV_ID_82598EB_XF_LR 0x10F4 #define IXGBE_DEV_ID_82599_KX4 0x10F7 +#define IXGBE_DEV_ID_82599_KX4_MEZZ 0x1514 #define IXGBE_DEV_ID_82599_CX4 0x10F9 #define IXGBE_DEV_ID_82599_SFP 0x10FB #define IXGBE_DEV_ID_82599_XAUI_LOM 0x10FC +#define IXGBE_DEV_ID_82599_COMBO_BACKPLANE 0x10F8 /* General Registers */ #define IXGBE_CTRL 0x00000 @@ -1336,6 +1338,8 @@ #define IXGBE_AUTOC_KX4_SUPP 0x80000000 #define IXGBE_AUTOC_KX_SUPP 0x40000000 #define IXGBE_AUTOC_PAUSE 0x30000000 +#define IXGBE_AUTOC_ASM_PAUSE 0x20000000 +#define IXGBE_AUTOC_SYM_PAUSE 0x10000000 #define IXGBE_AUTOC_RF 0x08000000 #define IXGBE_AUTOC_PD_TMR 0x06000000 #define IXGBE_AUTOC_AN_RX_LOOSE 0x01000000 @@ -1404,6 +1408,8 @@ #define IXGBE_LINK_UP_TIME 90 /* 9.0 Seconds */ #define IXGBE_AUTO_NEG_TIME 45 /* 4.5 Seconds */ +#define IXGBE_LINKS2_AN_SUPPORTED 0x00000040 + /* PCS1GLSTA Bit Masks */ #define IXGBE_PCS1GLSTA_LINK_OK 1 #define IXGBE_PCS1GLSTA_SYNK_OK 0x10 @@ -1424,6 +1430,11 @@ #define IXGBE_PCS1GLCTL_AN_ENABLE 0x10000 #define IXGBE_PCS1GLCTL_AN_RESTART 0x20000 +/* ANLP1 Bit Masks */ +#define IXGBE_ANLP1_PAUSE 0x0C00 +#define IXGBE_ANLP1_SYM_PAUSE 0x0400 +#define IXGBE_ANLP1_ASM_PAUSE 0x0800 + /* SW Semaphore Register bitmasks */ #define IXGBE_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */ #define IXGBE_SWSM_SWESMBI 0x00000002 /* FW Semaphore bit */ diff --git a/drivers/net/ixp2000/enp2611.c b/drivers/net/ixp2000/enp2611.c index b02a981c87a8..34a6cfd17930 100644 --- a/drivers/net/ixp2000/enp2611.c +++ b/drivers/net/ixp2000/enp2611.c @@ -119,24 +119,9 @@ static struct ixp2400_msf_parameters enp2611_msf_parameters = } }; -struct enp2611_ixpdev_priv -{ - struct ixpdev_priv ixpdev_priv; - struct net_device_stats stats; -}; - static struct net_device *nds[3]; static struct timer_list link_check_timer; -static struct net_device_stats *enp2611_get_stats(struct net_device *dev) -{ - struct enp2611_ixpdev_priv *ip = netdev_priv(dev); - - pm3386_get_stats(ip->ixpdev_priv.channel, &(ip->stats)); - - return &(ip->stats); -} - /* @@@ Poll the SFP moddef0 line too. */ /* @@@ Try to use the pm3386 DOOL interrupt as well. */ static void enp2611_check_link_status(unsigned long __dummy) @@ -203,14 +188,13 @@ static int __init enp2611_init_module(void) ports = pm3386_port_count(); for (i = 0; i < ports; i++) { - nds[i] = ixpdev_alloc(i, sizeof(struct enp2611_ixpdev_priv)); + nds[i] = ixpdev_alloc(i, sizeof(struct ixpdev_priv)); if (nds[i] == NULL) { while (--i >= 0) free_netdev(nds[i]); return -ENOMEM; } - nds[i]->get_stats = enp2611_get_stats; pm3386_init_port(i); pm3386_get_mac(i, nds[i]->dev_addr); } diff --git a/drivers/net/ixp2000/ixpdev.c b/drivers/net/ixp2000/ixpdev.c index 127243461a51..9aee0cc922c9 100644 --- a/drivers/net/ixp2000/ixpdev.c +++ b/drivers/net/ixp2000/ixpdev.c @@ -21,6 +21,7 @@ #include "ixp2400_tx.ucode" #include "ixpdev_priv.h" #include "ixpdev.h" +#include "pm3386.h" #define DRV_MODULE_VERSION "0.2" @@ -271,6 +272,15 @@ static int ixpdev_close(struct net_device *dev) return 0; } +static struct net_device_stats *ixpdev_get_stats(struct net_device *dev) +{ + struct ixpdev_priv *ip = netdev_priv(dev); + + pm3386_get_stats(ip->channel, &(dev->stats)); + + return &(dev->stats); +} + static const struct net_device_ops ixpdev_netdev_ops = { .ndo_open = ixpdev_open, .ndo_stop = ixpdev_close, @@ -278,6 +288,7 @@ static const struct net_device_ops ixpdev_netdev_ops = { .ndo_change_mtu = eth_change_mtu, .ndo_validate_addr = eth_validate_addr, .ndo_set_mac_address = eth_mac_addr, + .ndo_get_stats = ixpdev_get_stats, #ifdef CONFIG_NET_POLL_CONTROLLER .ndo_poll_controller = ixpdev_poll_controller, #endif diff --git a/drivers/net/ks8851_mll.c b/drivers/net/ks8851_mll.c new file mode 100644 index 000000000000..0be14d702beb --- /dev/null +++ b/drivers/net/ks8851_mll.c @@ -0,0 +1,1697 @@ +/** + * drivers/net/ks8851_mll.c + * Copyright (c) 2009 Micrel Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/** + * Supports: + * KS8851 16bit MLL chip from Micrel Inc. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/ethtool.h> +#include <linux/cache.h> +#include <linux/crc32.h> +#include <linux/mii.h> +#include <linux/platform_device.h> +#include <linux/delay.h> + +#define DRV_NAME "ks8851_mll" + +static u8 KS_DEFAULT_MAC_ADDRESS[] = { 0x00, 0x10, 0xA1, 0x86, 0x95, 0x11 }; +#define MAX_RECV_FRAMES 32 +#define MAX_BUF_SIZE 2048 +#define TX_BUF_SIZE 2000 +#define RX_BUF_SIZE 2000 + +#define KS_CCR 0x08 +#define CCR_EEPROM (1 << 9) +#define CCR_SPI (1 << 8) +#define CCR_8BIT (1 << 7) +#define CCR_16BIT (1 << 6) +#define CCR_32BIT (1 << 5) +#define CCR_SHARED (1 << 4) +#define CCR_32PIN (1 << 0) + +/* MAC address registers */ +#define KS_MARL 0x10 +#define KS_MARM 0x12 +#define KS_MARH 0x14 + +#define KS_OBCR 0x20 +#define OBCR_ODS_16MA (1 << 6) + +#define KS_EEPCR 0x22 +#define EEPCR_EESA (1 << 4) +#define EEPCR_EESB (1 << 3) +#define EEPCR_EEDO (1 << 2) +#define EEPCR_EESCK (1 << 1) +#define EEPCR_EECS (1 << 0) + +#define KS_MBIR 0x24 +#define MBIR_TXMBF (1 << 12) +#define MBIR_TXMBFA (1 << 11) +#define MBIR_RXMBF (1 << 4) +#define MBIR_RXMBFA (1 << 3) + +#define KS_GRR 0x26 +#define GRR_QMU (1 << 1) +#define GRR_GSR (1 << 0) + +#define KS_WFCR 0x2A +#define WFCR_MPRXE (1 << 7) +#define WFCR_WF3E (1 << 3) +#define WFCR_WF2E (1 << 2) +#define WFCR_WF1E (1 << 1) +#define WFCR_WF0E (1 << 0) + +#define KS_WF0CRC0 0x30 +#define KS_WF0CRC1 0x32 +#define KS_WF0BM0 0x34 +#define KS_WF0BM1 0x36 +#define KS_WF0BM2 0x38 +#define KS_WF0BM3 0x3A + +#define KS_WF1CRC0 0x40 +#define KS_WF1CRC1 0x42 +#define KS_WF1BM0 0x44 +#define KS_WF1BM1 0x46 +#define KS_WF1BM2 0x48 +#define KS_WF1BM3 0x4A + +#define KS_WF2CRC0 0x50 +#define KS_WF2CRC1 0x52 +#define KS_WF2BM0 0x54 +#define KS_WF2BM1 0x56 +#define KS_WF2BM2 0x58 +#define KS_WF2BM3 0x5A + +#define KS_WF3CRC0 0x60 +#define KS_WF3CRC1 0x62 +#define KS_WF3BM0 0x64 +#define KS_WF3BM1 0x66 +#define KS_WF3BM2 0x68 +#define KS_WF3BM3 0x6A + +#define KS_TXCR 0x70 +#define TXCR_TCGICMP (1 << 8) +#define TXCR_TCGUDP (1 << 7) +#define TXCR_TCGTCP (1 << 6) +#define TXCR_TCGIP (1 << 5) +#define TXCR_FTXQ (1 << 4) +#define TXCR_TXFCE (1 << 3) +#define TXCR_TXPE (1 << 2) +#define TXCR_TXCRC (1 << 1) +#define TXCR_TXE (1 << 0) + +#define KS_TXSR 0x72 +#define TXSR_TXLC (1 << 13) +#define TXSR_TXMC (1 << 12) +#define TXSR_TXFID_MASK (0x3f << 0) +#define TXSR_TXFID_SHIFT (0) +#define TXSR_TXFID_GET(_v) (((_v) >> 0) & 0x3f) + + +#define KS_RXCR1 0x74 +#define RXCR1_FRXQ (1 << 15) +#define RXCR1_RXUDPFCC (1 << 14) +#define RXCR1_RXTCPFCC (1 << 13) +#define RXCR1_RXIPFCC (1 << 12) +#define RXCR1_RXPAFMA (1 << 11) +#define RXCR1_RXFCE (1 << 10) +#define RXCR1_RXEFE (1 << 9) +#define RXCR1_RXMAFMA (1 << 8) +#define RXCR1_RXBE (1 << 7) +#define RXCR1_RXME (1 << 6) +#define RXCR1_RXUE (1 << 5) +#define RXCR1_RXAE (1 << 4) +#define RXCR1_RXINVF (1 << 1) +#define RXCR1_RXE (1 << 0) +#define RXCR1_FILTER_MASK (RXCR1_RXINVF | RXCR1_RXAE | \ + RXCR1_RXMAFMA | RXCR1_RXPAFMA) + +#define KS_RXCR2 0x76 +#define RXCR2_SRDBL_MASK (0x7 << 5) +#define RXCR2_SRDBL_SHIFT (5) +#define RXCR2_SRDBL_4B (0x0 << 5) +#define RXCR2_SRDBL_8B (0x1 << 5) +#define RXCR2_SRDBL_16B (0x2 << 5) +#define RXCR2_SRDBL_32B (0x3 << 5) +/* #define RXCR2_SRDBL_FRAME (0x4 << 5) */ +#define RXCR2_IUFFP (1 << 4) +#define RXCR2_RXIUFCEZ (1 << 3) +#define RXCR2_UDPLFE (1 << 2) +#define RXCR2_RXICMPFCC (1 << 1) +#define RXCR2_RXSAF (1 << 0) + +#define KS_TXMIR 0x78 + +#define KS_RXFHSR 0x7C +#define RXFSHR_RXFV (1 << 15) +#define RXFSHR_RXICMPFCS (1 << 13) +#define RXFSHR_RXIPFCS (1 << 12) +#define RXFSHR_RXTCPFCS (1 << 11) +#define RXFSHR_RXUDPFCS (1 << 10) +#define RXFSHR_RXBF (1 << 7) +#define RXFSHR_RXMF (1 << 6) +#define RXFSHR_RXUF (1 << 5) +#define RXFSHR_RXMR (1 << 4) +#define RXFSHR_RXFT (1 << 3) +#define RXFSHR_RXFTL (1 << 2) +#define RXFSHR_RXRF (1 << 1) +#define RXFSHR_RXCE (1 << 0) +#define RXFSHR_ERR (RXFSHR_RXCE | RXFSHR_RXRF |\ + RXFSHR_RXFTL | RXFSHR_RXMR |\ + RXFSHR_RXICMPFCS | RXFSHR_RXIPFCS |\ + RXFSHR_RXTCPFCS) +#define KS_RXFHBCR 0x7E +#define RXFHBCR_CNT_MASK 0x0FFF + +#define KS_TXQCR 0x80 +#define TXQCR_AETFE (1 << 2) +#define TXQCR_TXQMAM (1 << 1) +#define TXQCR_METFE (1 << 0) + +#define KS_RXQCR 0x82 +#define RXQCR_RXDTTS (1 << 12) +#define RXQCR_RXDBCTS (1 << 11) +#define RXQCR_RXFCTS (1 << 10) +#define RXQCR_RXIPHTOE (1 << 9) +#define RXQCR_RXDTTE (1 << 7) +#define RXQCR_RXDBCTE (1 << 6) +#define RXQCR_RXFCTE (1 << 5) +#define RXQCR_ADRFE (1 << 4) +#define RXQCR_SDA (1 << 3) +#define RXQCR_RRXEF (1 << 0) +#define RXQCR_CMD_CNTL (RXQCR_RXFCTE|RXQCR_ADRFE) + +#define KS_TXFDPR 0x84 +#define TXFDPR_TXFPAI (1 << 14) +#define TXFDPR_TXFP_MASK (0x7ff << 0) +#define TXFDPR_TXFP_SHIFT (0) + +#define KS_RXFDPR 0x86 +#define RXFDPR_RXFPAI (1 << 14) + +#define KS_RXDTTR 0x8C +#define KS_RXDBCTR 0x8E + +#define KS_IER 0x90 +#define KS_ISR 0x92 +#define IRQ_LCI (1 << 15) +#define IRQ_TXI (1 << 14) +#define IRQ_RXI (1 << 13) +#define IRQ_RXOI (1 << 11) +#define IRQ_TXPSI (1 << 9) +#define IRQ_RXPSI (1 << 8) +#define IRQ_TXSAI (1 << 6) +#define IRQ_RXWFDI (1 << 5) +#define IRQ_RXMPDI (1 << 4) +#define IRQ_LDI (1 << 3) +#define IRQ_EDI (1 << 2) +#define IRQ_SPIBEI (1 << 1) +#define IRQ_DEDI (1 << 0) + +#define KS_RXFCTR 0x9C +#define RXFCTR_THRESHOLD_MASK 0x00FF + +#define KS_RXFC 0x9D +#define RXFCTR_RXFC_MASK (0xff << 8) +#define RXFCTR_RXFC_SHIFT (8) +#define RXFCTR_RXFC_GET(_v) (((_v) >> 8) & 0xff) +#define RXFCTR_RXFCT_MASK (0xff << 0) +#define RXFCTR_RXFCT_SHIFT (0) + +#define KS_TXNTFSR 0x9E + +#define KS_MAHTR0 0xA0 +#define KS_MAHTR1 0xA2 +#define KS_MAHTR2 0xA4 +#define KS_MAHTR3 0xA6 + +#define KS_FCLWR 0xB0 +#define KS_FCHWR 0xB2 +#define KS_FCOWR 0xB4 + +#define KS_CIDER 0xC0 +#define CIDER_ID 0x8870 +#define CIDER_REV_MASK (0x7 << 1) +#define CIDER_REV_SHIFT (1) +#define CIDER_REV_GET(_v) (((_v) >> 1) & 0x7) + +#define KS_CGCR 0xC6 +#define KS_IACR 0xC8 +#define IACR_RDEN (1 << 12) +#define IACR_TSEL_MASK (0x3 << 10) +#define IACR_TSEL_SHIFT (10) +#define IACR_TSEL_MIB (0x3 << 10) +#define IACR_ADDR_MASK (0x1f << 0) +#define IACR_ADDR_SHIFT (0) + +#define KS_IADLR 0xD0 +#define KS_IAHDR 0xD2 + +#define KS_PMECR 0xD4 +#define PMECR_PME_DELAY (1 << 14) +#define PMECR_PME_POL (1 << 12) +#define PMECR_WOL_WAKEUP (1 << 11) +#define PMECR_WOL_MAGICPKT (1 << 10) +#define PMECR_WOL_LINKUP (1 << 9) +#define PMECR_WOL_ENERGY (1 << 8) +#define PMECR_AUTO_WAKE_EN (1 << 7) +#define PMECR_WAKEUP_NORMAL (1 << 6) +#define PMECR_WKEVT_MASK (0xf << 2) +#define PMECR_WKEVT_SHIFT (2) +#define PMECR_WKEVT_GET(_v) (((_v) >> 2) & 0xf) +#define PMECR_WKEVT_ENERGY (0x1 << 2) +#define PMECR_WKEVT_LINK (0x2 << 2) +#define PMECR_WKEVT_MAGICPKT (0x4 << 2) +#define PMECR_WKEVT_FRAME (0x8 << 2) +#define PMECR_PM_MASK (0x3 << 0) +#define PMECR_PM_SHIFT (0) +#define PMECR_PM_NORMAL (0x0 << 0) +#define PMECR_PM_ENERGY (0x1 << 0) +#define PMECR_PM_SOFTDOWN (0x2 << 0) +#define PMECR_PM_POWERSAVE (0x3 << 0) + +/* Standard MII PHY data */ +#define KS_P1MBCR 0xE4 +#define P1MBCR_FORCE_FDX (1 << 8) + +#define KS_P1MBSR 0xE6 +#define P1MBSR_AN_COMPLETE (1 << 5) +#define P1MBSR_AN_CAPABLE (1 << 3) +#define P1MBSR_LINK_UP (1 << 2) + +#define KS_PHY1ILR 0xE8 +#define KS_PHY1IHR 0xEA +#define KS_P1ANAR 0xEC +#define KS_P1ANLPR 0xEE + +#define KS_P1SCLMD 0xF4 +#define P1SCLMD_LEDOFF (1 << 15) +#define P1SCLMD_TXIDS (1 << 14) +#define P1SCLMD_RESTARTAN (1 << 13) +#define P1SCLMD_DISAUTOMDIX (1 << 10) +#define P1SCLMD_FORCEMDIX (1 << 9) +#define P1SCLMD_AUTONEGEN (1 << 7) +#define P1SCLMD_FORCE100 (1 << 6) +#define P1SCLMD_FORCEFDX (1 << 5) +#define P1SCLMD_ADV_FLOW (1 << 4) +#define P1SCLMD_ADV_100BT_FDX (1 << 3) +#define P1SCLMD_ADV_100BT_HDX (1 << 2) +#define P1SCLMD_ADV_10BT_FDX (1 << 1) +#define P1SCLMD_ADV_10BT_HDX (1 << 0) + +#define KS_P1CR 0xF6 +#define P1CR_HP_MDIX (1 << 15) +#define P1CR_REV_POL (1 << 13) +#define P1CR_OP_100M (1 << 10) +#define P1CR_OP_FDX (1 << 9) +#define P1CR_OP_MDI (1 << 7) +#define P1CR_AN_DONE (1 << 6) +#define P1CR_LINK_GOOD (1 << 5) +#define P1CR_PNTR_FLOW (1 << 4) +#define P1CR_PNTR_100BT_FDX (1 << 3) +#define P1CR_PNTR_100BT_HDX (1 << 2) +#define P1CR_PNTR_10BT_FDX (1 << 1) +#define P1CR_PNTR_10BT_HDX (1 << 0) + +/* TX Frame control */ + +#define TXFR_TXIC (1 << 15) +#define TXFR_TXFID_MASK (0x3f << 0) +#define TXFR_TXFID_SHIFT (0) + +#define KS_P1SR 0xF8 +#define P1SR_HP_MDIX (1 << 15) +#define P1SR_REV_POL (1 << 13) +#define P1SR_OP_100M (1 << 10) +#define P1SR_OP_FDX (1 << 9) +#define P1SR_OP_MDI (1 << 7) +#define P1SR_AN_DONE (1 << 6) +#define P1SR_LINK_GOOD (1 << 5) +#define P1SR_PNTR_FLOW (1 << 4) +#define P1SR_PNTR_100BT_FDX (1 << 3) +#define P1SR_PNTR_100BT_HDX (1 << 2) +#define P1SR_PNTR_10BT_FDX (1 << 1) +#define P1SR_PNTR_10BT_HDX (1 << 0) + +#define ENUM_BUS_NONE 0 +#define ENUM_BUS_8BIT 1 +#define ENUM_BUS_16BIT 2 +#define ENUM_BUS_32BIT 3 + +#define MAX_MCAST_LST 32 +#define HW_MCAST_SIZE 8 +#define MAC_ADDR_LEN 6 + +/** + * union ks_tx_hdr - tx header data + * @txb: The header as bytes + * @txw: The header as 16bit, little-endian words + * + * A dual representation of the tx header data to allow + * access to individual bytes, and to allow 16bit accesses + * with 16bit alignment. + */ +union ks_tx_hdr { + u8 txb[4]; + __le16 txw[2]; +}; + +/** + * struct ks_net - KS8851 driver private data + * @net_device : The network device we're bound to + * @hw_addr : start address of data register. + * @hw_addr_cmd : start address of command register. + * @txh : temporaly buffer to save status/length. + * @lock : Lock to ensure that the device is not accessed when busy. + * @pdev : Pointer to platform device. + * @mii : The MII state information for the mii calls. + * @frame_head_info : frame header information for multi-pkt rx. + * @statelock : Lock on this structure for tx list. + * @msg_enable : The message flags controlling driver output (see ethtool). + * @frame_cnt : number of frames received. + * @bus_width : i/o bus width. + * @irq : irq number assigned to this device. + * @rc_rxqcr : Cached copy of KS_RXQCR. + * @rc_txcr : Cached copy of KS_TXCR. + * @rc_ier : Cached copy of KS_IER. + * @sharedbus : Multipex(addr and data bus) mode indicator. + * @cmd_reg_cache : command register cached. + * @cmd_reg_cache_int : command register cached. Used in the irq handler. + * @promiscuous : promiscuous mode indicator. + * @all_mcast : mutlicast indicator. + * @mcast_lst_size : size of multicast list. + * @mcast_lst : multicast list. + * @mcast_bits : multicast enabed. + * @mac_addr : MAC address assigned to this device. + * @fid : frame id. + * @extra_byte : number of extra byte prepended rx pkt. + * @enabled : indicator this device works. + * + * The @lock ensures that the chip is protected when certain operations are + * in progress. When the read or write packet transfer is in progress, most + * of the chip registers are not accessible until the transfer is finished and + * the DMA has been de-asserted. + * + * The @statelock is used to protect information in the structure which may + * need to be accessed via several sources, such as the network driver layer + * or one of the work queues. + * + */ + +/* Receive multiplex framer header info */ +struct type_frame_head { + u16 sts; /* Frame status */ + u16 len; /* Byte count */ +}; + +struct ks_net { + struct net_device *netdev; + void __iomem *hw_addr; + void __iomem *hw_addr_cmd; + union ks_tx_hdr txh ____cacheline_aligned; + struct mutex lock; /* spinlock to be interrupt safe */ + struct platform_device *pdev; + struct mii_if_info mii; + struct type_frame_head *frame_head_info; + spinlock_t statelock; + u32 msg_enable; + u32 frame_cnt; + int bus_width; + int irq; + + u16 rc_rxqcr; + u16 rc_txcr; + u16 rc_ier; + u16 sharedbus; + u16 cmd_reg_cache; + u16 cmd_reg_cache_int; + u16 promiscuous; + u16 all_mcast; + u16 mcast_lst_size; + u8 mcast_lst[MAX_MCAST_LST][MAC_ADDR_LEN]; + u8 mcast_bits[HW_MCAST_SIZE]; + u8 mac_addr[6]; + u8 fid; + u8 extra_byte; + u8 enabled; +}; + +static int msg_enable; + +#define ks_info(_ks, _msg...) dev_info(&(_ks)->pdev->dev, _msg) +#define ks_warn(_ks, _msg...) dev_warn(&(_ks)->pdev->dev, _msg) +#define ks_dbg(_ks, _msg...) dev_dbg(&(_ks)->pdev->dev, _msg) +#define ks_err(_ks, _msg...) dev_err(&(_ks)->pdev->dev, _msg) + +#define BE3 0x8000 /* Byte Enable 3 */ +#define BE2 0x4000 /* Byte Enable 2 */ +#define BE1 0x2000 /* Byte Enable 1 */ +#define BE0 0x1000 /* Byte Enable 0 */ + +/** + * register read/write calls. + * + * All these calls issue transactions to access the chip's registers. They + * all require that the necessary lock is held to prevent accesses when the + * chip is busy transfering packet data (RX/TX FIFO accesses). + */ + +/** + * ks_rdreg8 - read 8 bit register from device + * @ks : The chip information + * @offset: The register address + * + * Read a 8bit register from the chip, returning the result + */ +static u8 ks_rdreg8(struct ks_net *ks, int offset) +{ + u16 data; + u8 shift_bit = offset & 0x03; + u8 shift_data = (offset & 1) << 3; + ks->cmd_reg_cache = (u16) offset | (u16)(BE0 << shift_bit); + iowrite16(ks->cmd_reg_cache, ks->hw_addr_cmd); + data = ioread16(ks->hw_addr); + return (u8)(data >> shift_data); +} + +/** + * ks_rdreg16 - read 16 bit register from device + * @ks : The chip information + * @offset: The register address + * + * Read a 16bit register from the chip, returning the result + */ + +static u16 ks_rdreg16(struct ks_net *ks, int offset) +{ + ks->cmd_reg_cache = (u16)offset | ((BE1 | BE0) << (offset & 0x02)); + iowrite16(ks->cmd_reg_cache, ks->hw_addr_cmd); + return ioread16(ks->hw_addr); +} + +/** + * ks_wrreg8 - write 8bit register value to chip + * @ks: The chip information + * @offset: The register address + * @value: The value to write + * + */ +static void ks_wrreg8(struct ks_net *ks, int offset, u8 value) +{ + u8 shift_bit = (offset & 0x03); + u16 value_write = (u16)(value << ((offset & 1) << 3)); + ks->cmd_reg_cache = (u16)offset | (BE0 << shift_bit); + iowrite16(ks->cmd_reg_cache, ks->hw_addr_cmd); + iowrite16(value_write, ks->hw_addr); +} + +/** + * ks_wrreg16 - write 16bit register value to chip + * @ks: The chip information + * @offset: The register address + * @value: The value to write + * + */ + +static void ks_wrreg16(struct ks_net *ks, int offset, u16 value) +{ + ks->cmd_reg_cache = (u16)offset | ((BE1 | BE0) << (offset & 0x02)); + iowrite16(ks->cmd_reg_cache, ks->hw_addr_cmd); + iowrite16(value, ks->hw_addr); +} + +/** + * ks_inblk - read a block of data from QMU. This is called after sudo DMA mode enabled. + * @ks: The chip state + * @wptr: buffer address to save data + * @len: length in byte to read + * + */ +static inline void ks_inblk(struct ks_net *ks, u16 *wptr, u32 len) +{ + len >>= 1; + while (len--) + *wptr++ = (u16)ioread16(ks->hw_addr); +} + +/** + * ks_outblk - write data to QMU. This is called after sudo DMA mode enabled. + * @ks: The chip information + * @wptr: buffer address + * @len: length in byte to write + * + */ +static inline void ks_outblk(struct ks_net *ks, u16 *wptr, u32 len) +{ + len >>= 1; + while (len--) + iowrite16(*wptr++, ks->hw_addr); +} + +/** + * ks_tx_fifo_space - return the available hardware buffer size. + * @ks: The chip information + * + */ +static inline u16 ks_tx_fifo_space(struct ks_net *ks) +{ + return ks_rdreg16(ks, KS_TXMIR) & 0x1fff; +} + +/** + * ks_save_cmd_reg - save the command register from the cache. + * @ks: The chip information + * + */ +static inline void ks_save_cmd_reg(struct ks_net *ks) +{ + /*ks8851 MLL has a bug to read back the command register. + * So rely on software to save the content of command register. + */ + ks->cmd_reg_cache_int = ks->cmd_reg_cache; +} + +/** + * ks_restore_cmd_reg - restore the command register from the cache and + * write to hardware register. + * @ks: The chip information + * + */ +static inline void ks_restore_cmd_reg(struct ks_net *ks) +{ + ks->cmd_reg_cache = ks->cmd_reg_cache_int; + iowrite16(ks->cmd_reg_cache, ks->hw_addr_cmd); +} + +/** + * ks_set_powermode - set power mode of the device + * @ks: The chip information + * @pwrmode: The power mode value to write to KS_PMECR. + * + * Change the power mode of the chip. + */ +static void ks_set_powermode(struct ks_net *ks, unsigned pwrmode) +{ + unsigned pmecr; + + if (netif_msg_hw(ks)) + ks_dbg(ks, "setting power mode %d\n", pwrmode); + + ks_rdreg16(ks, KS_GRR); + pmecr = ks_rdreg16(ks, KS_PMECR); + pmecr &= ~PMECR_PM_MASK; + pmecr |= pwrmode; + + ks_wrreg16(ks, KS_PMECR, pmecr); +} + +/** + * ks_read_config - read chip configuration of bus width. + * @ks: The chip information + * + */ +static void ks_read_config(struct ks_net *ks) +{ + u16 reg_data = 0; + + /* Regardless of bus width, 8 bit read should always work.*/ + reg_data = ks_rdreg8(ks, KS_CCR) & 0x00FF; + reg_data |= ks_rdreg8(ks, KS_CCR+1) << 8; + + /* addr/data bus are multiplexed */ + ks->sharedbus = (reg_data & CCR_SHARED) == CCR_SHARED; + + /* There are garbage data when reading data from QMU, + depending on bus-width. + */ + + if (reg_data & CCR_8BIT) { + ks->bus_width = ENUM_BUS_8BIT; + ks->extra_byte = 1; + } else if (reg_data & CCR_16BIT) { + ks->bus_width = ENUM_BUS_16BIT; + ks->extra_byte = 2; + } else { + ks->bus_width = ENUM_BUS_32BIT; + ks->extra_byte = 4; + } +} + +/** + * ks_soft_reset - issue one of the soft reset to the device + * @ks: The device state. + * @op: The bit(s) to set in the GRR + * + * Issue the relevant soft-reset command to the device's GRR register + * specified by @op. + * + * Note, the delays are in there as a caution to ensure that the reset + * has time to take effect and then complete. Since the datasheet does + * not currently specify the exact sequence, we have chosen something + * that seems to work with our device. + */ +static void ks_soft_reset(struct ks_net *ks, unsigned op) +{ + /* Disable interrupt first */ + ks_wrreg16(ks, KS_IER, 0x0000); + ks_wrreg16(ks, KS_GRR, op); + mdelay(10); /* wait a short time to effect reset */ + ks_wrreg16(ks, KS_GRR, 0); + mdelay(1); /* wait for condition to clear */ +} + + +/** + * ks_read_qmu - read 1 pkt data from the QMU. + * @ks: The chip information + * @buf: buffer address to save 1 pkt + * @len: Pkt length + * Here is the sequence to read 1 pkt: + * 1. set sudo DMA mode + * 2. read prepend data + * 3. read pkt data + * 4. reset sudo DMA Mode + */ +static inline void ks_read_qmu(struct ks_net *ks, u16 *buf, u32 len) +{ + u32 r = ks->extra_byte & 0x1 ; + u32 w = ks->extra_byte - r; + + /* 1. set sudo DMA mode */ + ks_wrreg16(ks, KS_RXFDPR, RXFDPR_RXFPAI); + ks_wrreg8(ks, KS_RXQCR, (ks->rc_rxqcr | RXQCR_SDA) & 0xff); + + /* 2. read prepend data */ + /** + * read 4 + extra bytes and discard them. + * extra bytes for dummy, 2 for status, 2 for len + */ + + /* use likely(r) for 8 bit access for performance */ + if (unlikely(r)) + ioread8(ks->hw_addr); + ks_inblk(ks, buf, w + 2 + 2); + + /* 3. read pkt data */ + ks_inblk(ks, buf, ALIGN(len, 4)); + + /* 4. reset sudo DMA Mode */ + ks_wrreg8(ks, KS_RXQCR, ks->rc_rxqcr); +} + +/** + * ks_rcv - read multiple pkts data from the QMU. + * @ks: The chip information + * @netdev: The network device being opened. + * + * Read all of header information before reading pkt content. + * It is not allowed only port of pkts in QMU after issuing + * interrupt ack. + */ +static void ks_rcv(struct ks_net *ks, struct net_device *netdev) +{ + u32 i; + struct type_frame_head *frame_hdr = ks->frame_head_info; + struct sk_buff *skb; + + ks->frame_cnt = ks_rdreg16(ks, KS_RXFCTR) >> 8; + + /* read all header information */ + for (i = 0; i < ks->frame_cnt; i++) { + /* Checking Received packet status */ + frame_hdr->sts = ks_rdreg16(ks, KS_RXFHSR); + /* Get packet len from hardware */ + frame_hdr->len = ks_rdreg16(ks, KS_RXFHBCR); + frame_hdr++; + } + + frame_hdr = ks->frame_head_info; + while (ks->frame_cnt--) { + skb = dev_alloc_skb(frame_hdr->len + 16); + if (likely(skb && (frame_hdr->sts & RXFSHR_RXFV) && + (frame_hdr->len < RX_BUF_SIZE) && frame_hdr->len)) { + skb_reserve(skb, 2); + /* read data block including CRC 4 bytes */ + ks_read_qmu(ks, (u16 *)skb->data, frame_hdr->len + 4); + skb_put(skb, frame_hdr->len); + skb->dev = netdev; + skb->protocol = eth_type_trans(skb, netdev); + netif_rx(skb); + } else { + printk(KERN_ERR "%s: err:skb alloc\n", __func__); + ks_wrreg16(ks, KS_RXQCR, (ks->rc_rxqcr | RXQCR_RRXEF)); + if (skb) + dev_kfree_skb_irq(skb); + } + frame_hdr++; + } +} + +/** + * ks_update_link_status - link status update. + * @netdev: The network device being opened. + * @ks: The chip information + * + */ + +static void ks_update_link_status(struct net_device *netdev, struct ks_net *ks) +{ + /* check the status of the link */ + u32 link_up_status; + if (ks_rdreg16(ks, KS_P1SR) & P1SR_LINK_GOOD) { + netif_carrier_on(netdev); + link_up_status = true; + } else { + netif_carrier_off(netdev); + link_up_status = false; + } + if (netif_msg_link(ks)) + ks_dbg(ks, "%s: %s\n", + __func__, link_up_status ? "UP" : "DOWN"); +} + +/** + * ks_irq - device interrupt handler + * @irq: Interrupt number passed from the IRQ hnalder. + * @pw: The private word passed to register_irq(), our struct ks_net. + * + * This is the handler invoked to find out what happened + * + * Read the interrupt status, work out what needs to be done and then clear + * any of the interrupts that are not needed. + */ + +static irqreturn_t ks_irq(int irq, void *pw) +{ + struct ks_net *ks = pw; + struct net_device *netdev = ks->netdev; + u16 status; + + /*this should be the first in IRQ handler */ + ks_save_cmd_reg(ks); + + status = ks_rdreg16(ks, KS_ISR); + if (unlikely(!status)) { + ks_restore_cmd_reg(ks); + return IRQ_NONE; + } + + ks_wrreg16(ks, KS_ISR, status); + + if (likely(status & IRQ_RXI)) + ks_rcv(ks, netdev); + + if (unlikely(status & IRQ_LCI)) + ks_update_link_status(netdev, ks); + + if (unlikely(status & IRQ_TXI)) + netif_wake_queue(netdev); + + if (unlikely(status & IRQ_LDI)) { + + u16 pmecr = ks_rdreg16(ks, KS_PMECR); + pmecr &= ~PMECR_WKEVT_MASK; + ks_wrreg16(ks, KS_PMECR, pmecr | PMECR_WKEVT_LINK); + } + + /* this should be the last in IRQ handler*/ + ks_restore_cmd_reg(ks); + return IRQ_HANDLED; +} + + +/** + * ks_net_open - open network device + * @netdev: The network device being opened. + * + * Called when the network device is marked active, such as a user executing + * 'ifconfig up' on the device. + */ +static int ks_net_open(struct net_device *netdev) +{ + struct ks_net *ks = netdev_priv(netdev); + int err; + +#define KS_INT_FLAGS (IRQF_DISABLED|IRQF_TRIGGER_LOW) + /* lock the card, even if we may not actually do anything + * else at the moment. + */ + + if (netif_msg_ifup(ks)) + ks_dbg(ks, "%s - entry\n", __func__); + + /* reset the HW */ + err = request_irq(ks->irq, ks_irq, KS_INT_FLAGS, DRV_NAME, ks); + + if (err) { + printk(KERN_ERR "Failed to request IRQ: %d: %d\n", + ks->irq, err); + return err; + } + + if (netif_msg_ifup(ks)) + ks_dbg(ks, "network device %s up\n", netdev->name); + + return 0; +} + +/** + * ks_net_stop - close network device + * @netdev: The device being closed. + * + * Called to close down a network device which has been active. Cancell any + * work, shutdown the RX and TX process and then place the chip into a low + * power state whilst it is not being used. + */ +static int ks_net_stop(struct net_device *netdev) +{ + struct ks_net *ks = netdev_priv(netdev); + + if (netif_msg_ifdown(ks)) + ks_info(ks, "%s: shutting down\n", netdev->name); + + netif_stop_queue(netdev); + + kfree(ks->frame_head_info); + + mutex_lock(&ks->lock); + + /* turn off the IRQs and ack any outstanding */ + ks_wrreg16(ks, KS_IER, 0x0000); + ks_wrreg16(ks, KS_ISR, 0xffff); + + /* shutdown RX process */ + ks_wrreg16(ks, KS_RXCR1, 0x0000); + + /* shutdown TX process */ + ks_wrreg16(ks, KS_TXCR, 0x0000); + + /* set powermode to soft power down to save power */ + ks_set_powermode(ks, PMECR_PM_SOFTDOWN); + free_irq(ks->irq, netdev); + mutex_unlock(&ks->lock); + return 0; +} + + +/** + * ks_write_qmu - write 1 pkt data to the QMU. + * @ks: The chip information + * @pdata: buffer address to save 1 pkt + * @len: Pkt length in byte + * Here is the sequence to write 1 pkt: + * 1. set sudo DMA mode + * 2. write status/length + * 3. write pkt data + * 4. reset sudo DMA Mode + * 5. reset sudo DMA mode + * 6. Wait until pkt is out + */ +static void ks_write_qmu(struct ks_net *ks, u8 *pdata, u16 len) +{ + unsigned fid = ks->fid; + + fid = ks->fid; + ks->fid = (ks->fid + 1) & TXFR_TXFID_MASK; + + /* reduce the tx interrupt occurrances. */ + if (!fid) + fid |= TXFR_TXIC; /* irq on completion */ + + /* start header at txb[0] to align txw entries */ + ks->txh.txw[0] = cpu_to_le16(fid); + ks->txh.txw[1] = cpu_to_le16(len); + + /* 1. set sudo-DMA mode */ + ks_wrreg8(ks, KS_RXQCR, (ks->rc_rxqcr | RXQCR_SDA) & 0xff); + /* 2. write status/lenth info */ + ks_outblk(ks, ks->txh.txw, 4); + /* 3. write pkt data */ + ks_outblk(ks, (u16 *)pdata, ALIGN(len, 4)); + /* 4. reset sudo-DMA mode */ + ks_wrreg8(ks, KS_RXQCR, ks->rc_rxqcr); + /* 5. Enqueue Tx(move the pkt from TX buffer into TXQ) */ + ks_wrreg16(ks, KS_TXQCR, TXQCR_METFE); + /* 6. wait until TXQCR_METFE is auto-cleared */ + while (ks_rdreg16(ks, KS_TXQCR) & TXQCR_METFE) + ; +} + +static void ks_disable_int(struct ks_net *ks) +{ + ks_wrreg16(ks, KS_IER, 0x0000); +} /* ks_disable_int */ + +static void ks_enable_int(struct ks_net *ks) +{ + ks_wrreg16(ks, KS_IER, ks->rc_ier); +} /* ks_enable_int */ + +/** + * ks_start_xmit - transmit packet + * @skb : The buffer to transmit + * @netdev : The device used to transmit the packet. + * + * Called by the network layer to transmit the @skb. + * spin_lock_irqsave is required because tx and rx should be mutual exclusive. + * So while tx is in-progress, prevent IRQ interrupt from happenning. + */ +static int ks_start_xmit(struct sk_buff *skb, struct net_device *netdev) +{ + int retv = NETDEV_TX_OK; + struct ks_net *ks = netdev_priv(netdev); + + disable_irq(netdev->irq); + ks_disable_int(ks); + spin_lock(&ks->statelock); + + /* Extra space are required: + * 4 byte for alignment, 4 for status/length, 4 for CRC + */ + + if (likely(ks_tx_fifo_space(ks) >= skb->len + 12)) { + ks_write_qmu(ks, skb->data, skb->len); + dev_kfree_skb(skb); + } else + retv = NETDEV_TX_BUSY; + spin_unlock(&ks->statelock); + ks_enable_int(ks); + enable_irq(netdev->irq); + return retv; +} + +/** + * ks_start_rx - ready to serve pkts + * @ks : The chip information + * + */ +static void ks_start_rx(struct ks_net *ks) +{ + u16 cntl; + + /* Enables QMU Receive (RXCR1). */ + cntl = ks_rdreg16(ks, KS_RXCR1); + cntl |= RXCR1_RXE ; + ks_wrreg16(ks, KS_RXCR1, cntl); +} /* ks_start_rx */ + +/** + * ks_stop_rx - stop to serve pkts + * @ks : The chip information + * + */ +static void ks_stop_rx(struct ks_net *ks) +{ + u16 cntl; + + /* Disables QMU Receive (RXCR1). */ + cntl = ks_rdreg16(ks, KS_RXCR1); + cntl &= ~RXCR1_RXE ; + ks_wrreg16(ks, KS_RXCR1, cntl); + +} /* ks_stop_rx */ + +static unsigned long const ethernet_polynomial = 0x04c11db7U; + +static unsigned long ether_gen_crc(int length, u8 *data) +{ + long crc = -1; + while (--length >= 0) { + u8 current_octet = *data++; + int bit; + + for (bit = 0; bit < 8; bit++, current_octet >>= 1) { + crc = (crc << 1) ^ + ((crc < 0) ^ (current_octet & 1) ? + ethernet_polynomial : 0); + } + } + return (unsigned long)crc; +} /* ether_gen_crc */ + +/** +* ks_set_grpaddr - set multicast information +* @ks : The chip information +*/ + +static void ks_set_grpaddr(struct ks_net *ks) +{ + u8 i; + u32 index, position, value; + + memset(ks->mcast_bits, 0, sizeof(u8) * HW_MCAST_SIZE); + + for (i = 0; i < ks->mcast_lst_size; i++) { + position = (ether_gen_crc(6, ks->mcast_lst[i]) >> 26) & 0x3f; + index = position >> 3; + value = 1 << (position & 7); + ks->mcast_bits[index] |= (u8)value; + } + + for (i = 0; i < HW_MCAST_SIZE; i++) { + if (i & 1) { + ks_wrreg16(ks, (u16)((KS_MAHTR0 + i) & ~1), + (ks->mcast_bits[i] << 8) | + ks->mcast_bits[i - 1]); + } + } +} /* ks_set_grpaddr */ + +/* +* ks_clear_mcast - clear multicast information +* +* @ks : The chip information +* This routine removes all mcast addresses set in the hardware. +*/ + +static void ks_clear_mcast(struct ks_net *ks) +{ + u16 i, mcast_size; + for (i = 0; i < HW_MCAST_SIZE; i++) + ks->mcast_bits[i] = 0; + + mcast_size = HW_MCAST_SIZE >> 2; + for (i = 0; i < mcast_size; i++) + ks_wrreg16(ks, KS_MAHTR0 + (2*i), 0); +} + +static void ks_set_promis(struct ks_net *ks, u16 promiscuous_mode) +{ + u16 cntl; + ks->promiscuous = promiscuous_mode; + ks_stop_rx(ks); /* Stop receiving for reconfiguration */ + cntl = ks_rdreg16(ks, KS_RXCR1); + + cntl &= ~RXCR1_FILTER_MASK; + if (promiscuous_mode) + /* Enable Promiscuous mode */ + cntl |= RXCR1_RXAE | RXCR1_RXINVF; + else + /* Disable Promiscuous mode (default normal mode) */ + cntl |= RXCR1_RXPAFMA; + + ks_wrreg16(ks, KS_RXCR1, cntl); + + if (ks->enabled) + ks_start_rx(ks); + +} /* ks_set_promis */ + +static void ks_set_mcast(struct ks_net *ks, u16 mcast) +{ + u16 cntl; + + ks->all_mcast = mcast; + ks_stop_rx(ks); /* Stop receiving for reconfiguration */ + cntl = ks_rdreg16(ks, KS_RXCR1); + cntl &= ~RXCR1_FILTER_MASK; + if (mcast) + /* Enable "Perfect with Multicast address passed mode" */ + cntl |= (RXCR1_RXAE | RXCR1_RXMAFMA | RXCR1_RXPAFMA); + else + /** + * Disable "Perfect with Multicast address passed + * mode" (normal mode). + */ + cntl |= RXCR1_RXPAFMA; + + ks_wrreg16(ks, KS_RXCR1, cntl); + + if (ks->enabled) + ks_start_rx(ks); +} /* ks_set_mcast */ + +static void ks_set_rx_mode(struct net_device *netdev) +{ + struct ks_net *ks = netdev_priv(netdev); + struct dev_mc_list *ptr; + + /* Turn on/off promiscuous mode. */ + if ((netdev->flags & IFF_PROMISC) == IFF_PROMISC) + ks_set_promis(ks, + (u16)((netdev->flags & IFF_PROMISC) == IFF_PROMISC)); + /* Turn on/off all mcast mode. */ + else if ((netdev->flags & IFF_ALLMULTI) == IFF_ALLMULTI) + ks_set_mcast(ks, + (u16)((netdev->flags & IFF_ALLMULTI) == IFF_ALLMULTI)); + else + ks_set_promis(ks, false); + + if ((netdev->flags & IFF_MULTICAST) && netdev->mc_count) { + if (netdev->mc_count <= MAX_MCAST_LST) { + int i = 0; + for (ptr = netdev->mc_list; ptr; ptr = ptr->next) { + if (!(*ptr->dmi_addr & 1)) + continue; + if (i >= MAX_MCAST_LST) + break; + memcpy(ks->mcast_lst[i++], ptr->dmi_addr, + MAC_ADDR_LEN); + } + ks->mcast_lst_size = (u8)i; + ks_set_grpaddr(ks); + } else { + /** + * List too big to support so + * turn on all mcast mode. + */ + ks->mcast_lst_size = MAX_MCAST_LST; + ks_set_mcast(ks, true); + } + } else { + ks->mcast_lst_size = 0; + ks_clear_mcast(ks); + } +} /* ks_set_rx_mode */ + +static void ks_set_mac(struct ks_net *ks, u8 *data) +{ + u16 *pw = (u16 *)data; + u16 w, u; + + ks_stop_rx(ks); /* Stop receiving for reconfiguration */ + + u = *pw++; + w = ((u & 0xFF) << 8) | ((u >> 8) & 0xFF); + ks_wrreg16(ks, KS_MARH, w); + + u = *pw++; + w = ((u & 0xFF) << 8) | ((u >> 8) & 0xFF); + ks_wrreg16(ks, KS_MARM, w); + + u = *pw; + w = ((u & 0xFF) << 8) | ((u >> 8) & 0xFF); + ks_wrreg16(ks, KS_MARL, w); + + memcpy(ks->mac_addr, data, 6); + + if (ks->enabled) + ks_start_rx(ks); +} + +static int ks_set_mac_address(struct net_device *netdev, void *paddr) +{ + struct ks_net *ks = netdev_priv(netdev); + struct sockaddr *addr = paddr; + u8 *da; + + memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); + + da = (u8 *)netdev->dev_addr; + + ks_set_mac(ks, da); + return 0; +} + +static int ks_net_ioctl(struct net_device *netdev, struct ifreq *req, int cmd) +{ + struct ks_net *ks = netdev_priv(netdev); + + if (!netif_running(netdev)) + return -EINVAL; + + return generic_mii_ioctl(&ks->mii, if_mii(req), cmd, NULL); +} + +static const struct net_device_ops ks_netdev_ops = { + .ndo_open = ks_net_open, + .ndo_stop = ks_net_stop, + .ndo_do_ioctl = ks_net_ioctl, + .ndo_start_xmit = ks_start_xmit, + .ndo_set_mac_address = ks_set_mac_address, + .ndo_set_rx_mode = ks_set_rx_mode, + .ndo_change_mtu = eth_change_mtu, + .ndo_validate_addr = eth_validate_addr, +}; + +/* ethtool support */ + +static void ks_get_drvinfo(struct net_device *netdev, + struct ethtool_drvinfo *di) +{ + strlcpy(di->driver, DRV_NAME, sizeof(di->driver)); + strlcpy(di->version, "1.00", sizeof(di->version)); + strlcpy(di->bus_info, dev_name(netdev->dev.parent), + sizeof(di->bus_info)); +} + +static u32 ks_get_msglevel(struct net_device *netdev) +{ + struct ks_net *ks = netdev_priv(netdev); + return ks->msg_enable; +} + +static void ks_set_msglevel(struct net_device *netdev, u32 to) +{ + struct ks_net *ks = netdev_priv(netdev); + ks->msg_enable = to; +} + +static int ks_get_settings(struct net_device *netdev, struct ethtool_cmd *cmd) +{ + struct ks_net *ks = netdev_priv(netdev); + return mii_ethtool_gset(&ks->mii, cmd); +} + +static int ks_set_settings(struct net_device *netdev, struct ethtool_cmd *cmd) +{ + struct ks_net *ks = netdev_priv(netdev); + return mii_ethtool_sset(&ks->mii, cmd); +} + +static u32 ks_get_link(struct net_device *netdev) +{ + struct ks_net *ks = netdev_priv(netdev); + return mii_link_ok(&ks->mii); +} + +static int ks_nway_reset(struct net_device *netdev) +{ + struct ks_net *ks = netdev_priv(netdev); + return mii_nway_restart(&ks->mii); +} + +static const struct ethtool_ops ks_ethtool_ops = { + .get_drvinfo = ks_get_drvinfo, + .get_msglevel = ks_get_msglevel, + .set_msglevel = ks_set_msglevel, + .get_settings = ks_get_settings, + .set_settings = ks_set_settings, + .get_link = ks_get_link, + .nway_reset = ks_nway_reset, +}; + +/* MII interface controls */ + +/** + * ks_phy_reg - convert MII register into a KS8851 register + * @reg: MII register number. + * + * Return the KS8851 register number for the corresponding MII PHY register + * if possible. Return zero if the MII register has no direct mapping to the + * KS8851 register set. + */ +static int ks_phy_reg(int reg) +{ + switch (reg) { + case MII_BMCR: + return KS_P1MBCR; + case MII_BMSR: + return KS_P1MBSR; + case MII_PHYSID1: + return KS_PHY1ILR; + case MII_PHYSID2: + return KS_PHY1IHR; + case MII_ADVERTISE: + return KS_P1ANAR; + case MII_LPA: + return KS_P1ANLPR; + } + + return 0x0; +} + +/** + * ks_phy_read - MII interface PHY register read. + * @netdev: The network device the PHY is on. + * @phy_addr: Address of PHY (ignored as we only have one) + * @reg: The register to read. + * + * This call reads data from the PHY register specified in @reg. Since the + * device does not support all the MII registers, the non-existant values + * are always returned as zero. + * + * We return zero for unsupported registers as the MII code does not check + * the value returned for any error status, and simply returns it to the + * caller. The mii-tool that the driver was tested with takes any -ve error + * as real PHY capabilities, thus displaying incorrect data to the user. + */ +static int ks_phy_read(struct net_device *netdev, int phy_addr, int reg) +{ + struct ks_net *ks = netdev_priv(netdev); + int ksreg; + int result; + + ksreg = ks_phy_reg(reg); + if (!ksreg) + return 0x0; /* no error return allowed, so use zero */ + + mutex_lock(&ks->lock); + result = ks_rdreg16(ks, ksreg); + mutex_unlock(&ks->lock); + + return result; +} + +static void ks_phy_write(struct net_device *netdev, + int phy, int reg, int value) +{ + struct ks_net *ks = netdev_priv(netdev); + int ksreg; + + ksreg = ks_phy_reg(reg); + if (ksreg) { + mutex_lock(&ks->lock); + ks_wrreg16(ks, ksreg, value); + mutex_unlock(&ks->lock); + } +} + +/** + * ks_read_selftest - read the selftest memory info. + * @ks: The device state + * + * Read and check the TX/RX memory selftest information. + */ +static int ks_read_selftest(struct ks_net *ks) +{ + unsigned both_done = MBIR_TXMBF | MBIR_RXMBF; + int ret = 0; + unsigned rd; + + rd = ks_rdreg16(ks, KS_MBIR); + + if ((rd & both_done) != both_done) { + ks_warn(ks, "Memory selftest not finished\n"); + return 0; + } + + if (rd & MBIR_TXMBFA) { + ks_err(ks, "TX memory selftest fails\n"); + ret |= 1; + } + + if (rd & MBIR_RXMBFA) { + ks_err(ks, "RX memory selftest fails\n"); + ret |= 2; + } + + ks_info(ks, "the selftest passes\n"); + return ret; +} + +static void ks_disable(struct ks_net *ks) +{ + u16 w; + + w = ks_rdreg16(ks, KS_TXCR); + + /* Disables QMU Transmit (TXCR). */ + w &= ~TXCR_TXE; + ks_wrreg16(ks, KS_TXCR, w); + + /* Disables QMU Receive (RXCR1). */ + w = ks_rdreg16(ks, KS_RXCR1); + w &= ~RXCR1_RXE ; + ks_wrreg16(ks, KS_RXCR1, w); + + ks->enabled = false; + +} /* ks_disable */ + +static void ks_setup(struct ks_net *ks) +{ + u16 w; + + /** + * Configure QMU Transmit + */ + + /* Setup Transmit Frame Data Pointer Auto-Increment (TXFDPR) */ + ks_wrreg16(ks, KS_TXFDPR, TXFDPR_TXFPAI); + + /* Setup Receive Frame Data Pointer Auto-Increment */ + ks_wrreg16(ks, KS_RXFDPR, RXFDPR_RXFPAI); + + /* Setup Receive Frame Threshold - 1 frame (RXFCTFC) */ + ks_wrreg16(ks, KS_RXFCTR, 1 & RXFCTR_THRESHOLD_MASK); + + /* Setup RxQ Command Control (RXQCR) */ + ks->rc_rxqcr = RXQCR_CMD_CNTL; + ks_wrreg16(ks, KS_RXQCR, ks->rc_rxqcr); + + /** + * set the force mode to half duplex, default is full duplex + * because if the auto-negotiation fails, most switch uses + * half-duplex. + */ + + w = ks_rdreg16(ks, KS_P1MBCR); + w &= ~P1MBCR_FORCE_FDX; + ks_wrreg16(ks, KS_P1MBCR, w); + + w = TXCR_TXFCE | TXCR_TXPE | TXCR_TXCRC | TXCR_TCGIP; + ks_wrreg16(ks, KS_TXCR, w); + + w = RXCR1_RXFCE | RXCR1_RXBE | RXCR1_RXUE; + + if (ks->promiscuous) /* bPromiscuous */ + w |= (RXCR1_RXAE | RXCR1_RXINVF); + else if (ks->all_mcast) /* Multicast address passed mode */ + w |= (RXCR1_RXAE | RXCR1_RXMAFMA | RXCR1_RXPAFMA); + else /* Normal mode */ + w |= RXCR1_RXPAFMA; + + ks_wrreg16(ks, KS_RXCR1, w); +} /*ks_setup */ + + +static void ks_setup_int(struct ks_net *ks) +{ + ks->rc_ier = 0x00; + /* Clear the interrupts status of the hardware. */ + ks_wrreg16(ks, KS_ISR, 0xffff); + + /* Enables the interrupts of the hardware. */ + ks->rc_ier = (IRQ_LCI | IRQ_TXI | IRQ_RXI); +} /* ks_setup_int */ + +void ks_enable(struct ks_net *ks) +{ + u16 w; + + w = ks_rdreg16(ks, KS_TXCR); + /* Enables QMU Transmit (TXCR). */ + ks_wrreg16(ks, KS_TXCR, w | TXCR_TXE); + + /* + * RX Frame Count Threshold Enable and Auto-Dequeue RXQ Frame + * Enable + */ + + w = ks_rdreg16(ks, KS_RXQCR); + ks_wrreg16(ks, KS_RXQCR, w | RXQCR_RXFCTE); + + /* Enables QMU Receive (RXCR1). */ + w = ks_rdreg16(ks, KS_RXCR1); + ks_wrreg16(ks, KS_RXCR1, w | RXCR1_RXE); + ks->enabled = true; +} /* ks_enable */ + +static int ks_hw_init(struct ks_net *ks) +{ +#define MHEADER_SIZE (sizeof(struct type_frame_head) * MAX_RECV_FRAMES) + ks->promiscuous = 0; + ks->all_mcast = 0; + ks->mcast_lst_size = 0; + + ks->frame_head_info = (struct type_frame_head *) \ + kmalloc(MHEADER_SIZE, GFP_KERNEL); + if (!ks->frame_head_info) { + printk(KERN_ERR "Error: Fail to allocate frame memory\n"); + return false; + } + + ks_set_mac(ks, KS_DEFAULT_MAC_ADDRESS); + return true; +} + + +static int __devinit ks8851_probe(struct platform_device *pdev) +{ + int err = -ENOMEM; + struct resource *io_d, *io_c; + struct net_device *netdev; + struct ks_net *ks; + u16 id, data; + + io_d = platform_get_resource(pdev, IORESOURCE_MEM, 0); + io_c = platform_get_resource(pdev, IORESOURCE_MEM, 1); + + if (!request_mem_region(io_d->start, resource_size(io_d), DRV_NAME)) + goto err_mem_region; + + if (!request_mem_region(io_c->start, resource_size(io_c), DRV_NAME)) + goto err_mem_region1; + + netdev = alloc_etherdev(sizeof(struct ks_net)); + if (!netdev) + goto err_alloc_etherdev; + + SET_NETDEV_DEV(netdev, &pdev->dev); + + ks = netdev_priv(netdev); + ks->netdev = netdev; + ks->hw_addr = ioremap(io_d->start, resource_size(io_d)); + + if (!ks->hw_addr) + goto err_ioremap; + + ks->hw_addr_cmd = ioremap(io_c->start, resource_size(io_c)); + if (!ks->hw_addr_cmd) + goto err_ioremap1; + + ks->irq = platform_get_irq(pdev, 0); + + if (ks->irq < 0) { + err = ks->irq; + goto err_get_irq; + } + + ks->pdev = pdev; + + mutex_init(&ks->lock); + spin_lock_init(&ks->statelock); + + netdev->netdev_ops = &ks_netdev_ops; + netdev->ethtool_ops = &ks_ethtool_ops; + + /* setup mii state */ + ks->mii.dev = netdev; + ks->mii.phy_id = 1, + ks->mii.phy_id_mask = 1; + ks->mii.reg_num_mask = 0xf; + ks->mii.mdio_read = ks_phy_read; + ks->mii.mdio_write = ks_phy_write; + + ks_info(ks, "message enable is %d\n", msg_enable); + /* set the default message enable */ + ks->msg_enable = netif_msg_init(msg_enable, (NETIF_MSG_DRV | + NETIF_MSG_PROBE | + NETIF_MSG_LINK)); + ks_read_config(ks); + + /* simple check for a valid chip being connected to the bus */ + if ((ks_rdreg16(ks, KS_CIDER) & ~CIDER_REV_MASK) != CIDER_ID) { + ks_err(ks, "failed to read device ID\n"); + err = -ENODEV; + goto err_register; + } + + if (ks_read_selftest(ks)) { + ks_err(ks, "failed to read device ID\n"); + err = -ENODEV; + goto err_register; + } + + err = register_netdev(netdev); + if (err) + goto err_register; + + platform_set_drvdata(pdev, netdev); + + ks_soft_reset(ks, GRR_GSR); + ks_hw_init(ks); + ks_disable(ks); + ks_setup(ks); + ks_setup_int(ks); + ks_enable_int(ks); + ks_enable(ks); + memcpy(netdev->dev_addr, ks->mac_addr, 6); + + data = ks_rdreg16(ks, KS_OBCR); + ks_wrreg16(ks, KS_OBCR, data | OBCR_ODS_16MA); + + /** + * If you want to use the default MAC addr, + * comment out the 2 functions below. + */ + + random_ether_addr(netdev->dev_addr); + ks_set_mac(ks, netdev->dev_addr); + + id = ks_rdreg16(ks, KS_CIDER); + + printk(KERN_INFO DRV_NAME + " Found chip, family: 0x%x, id: 0x%x, rev: 0x%x\n", + (id >> 8) & 0xff, (id >> 4) & 0xf, (id >> 1) & 0x7); + return 0; + +err_register: +err_get_irq: + iounmap(ks->hw_addr_cmd); +err_ioremap1: + iounmap(ks->hw_addr); +err_ioremap: + free_netdev(netdev); +err_alloc_etherdev: + release_mem_region(io_c->start, resource_size(io_c)); +err_mem_region1: + release_mem_region(io_d->start, resource_size(io_d)); +err_mem_region: + return err; +} + +static int __devexit ks8851_remove(struct platform_device *pdev) +{ + struct net_device *netdev = platform_get_drvdata(pdev); + struct ks_net *ks = netdev_priv(netdev); + struct resource *iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + unregister_netdev(netdev); + iounmap(ks->hw_addr); + free_netdev(netdev); + release_mem_region(iomem->start, resource_size(iomem)); + platform_set_drvdata(pdev, NULL); + return 0; + +} + +static struct platform_driver ks8851_platform_driver = { + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + }, + .probe = ks8851_probe, + .remove = __devexit_p(ks8851_remove), +}; + +static int __init ks8851_init(void) +{ + return platform_driver_register(&ks8851_platform_driver); +} + +static void __exit ks8851_exit(void) +{ + platform_driver_unregister(&ks8851_platform_driver); +} + +module_init(ks8851_init); +module_exit(ks8851_exit); + +MODULE_DESCRIPTION("KS8851 MLL Network driver"); +MODULE_AUTHOR("David Choi <david.choi@micrel.com>"); +MODULE_LICENSE("GPL"); +module_param_named(message, msg_enable, int, 0); +MODULE_PARM_DESC(message, "Message verbosity level (0=none, 31=all)"); + diff --git a/drivers/net/meth.c b/drivers/net/meth.c index 92ceb689b4d4..2af81735386b 100644 --- a/drivers/net/meth.c +++ b/drivers/net/meth.c @@ -828,7 +828,7 @@ static int __exit meth_remove(struct platform_device *pdev) static struct platform_driver meth_driver = { .probe = meth_probe, - .remove = __devexit_p(meth_remove), + .remove = __exit_p(meth_remove), .driver = { .name = "meth", .owner = THIS_MODULE, diff --git a/drivers/net/mlx4/main.c b/drivers/net/mlx4/main.c index 3dd481e77f92..5dd7225b178e 100644 --- a/drivers/net/mlx4/main.c +++ b/drivers/net/mlx4/main.c @@ -1282,6 +1282,7 @@ static struct pci_device_id mlx4_pci_table[] = { { PCI_VDEVICE(MELLANOX, 0x6372) }, /* MT25458 ConnectX EN 10GBASE-T 10GigE */ { PCI_VDEVICE(MELLANOX, 0x675a) }, /* MT25458 ConnectX EN 10GBASE-T+Gen2 10GigE */ { PCI_VDEVICE(MELLANOX, 0x6764) }, /* MT26468 ConnectX EN 10GigE PCIe gen2*/ + { PCI_VDEVICE(MELLANOX, 0x676e) }, /* MT26478 ConnectX2 40GigE PCIe gen2 */ { 0, } }; diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c index b5aa974827e5..7fc15e9e8adb 100644 --- a/drivers/net/netxen/netxen_nic_main.c +++ b/drivers/net/netxen/netxen_nic_main.c @@ -595,7 +595,8 @@ netxen_setup_pci_map(struct netxen_adapter *adapter) void __iomem *mem_ptr2 = NULL; void __iomem *db_ptr = NULL; - unsigned long mem_base, mem_len, db_base, db_len = 0, pci_len0 = 0; + resource_size_t mem_base, db_base; + unsigned long mem_len, db_len = 0, pci_len0 = 0; struct pci_dev *pdev = adapter->pdev; int pci_func = adapter->ahw.pci_func; @@ -1714,7 +1715,7 @@ netxen_nic_xmit_frame(struct sk_buff *skb, struct net_device *netdev) /* 4 fragments per cmd des */ no_of_desc = (frag_count + 3) >> 2; - if (unlikely(no_of_desc + 2) > netxen_tx_avail(tx_ring)) { + if (unlikely(no_of_desc + 2 > netxen_tx_avail(tx_ring))) { netif_stop_queue(netdev); return NETDEV_TX_BUSY; } diff --git a/drivers/net/ns83820.c b/drivers/net/ns83820.c index c594e1946476..57fd483dbb1f 100644 --- a/drivers/net/ns83820.c +++ b/drivers/net/ns83820.c @@ -111,6 +111,7 @@ #include <linux/compiler.h> #include <linux/prefetch.h> #include <linux/ethtool.h> +#include <linux/sched.h> #include <linux/timer.h> #include <linux/if_vlan.h> #include <linux/rtnetlink.h> diff --git a/drivers/net/pasemi_mac_ethtool.c b/drivers/net/pasemi_mac_ethtool.c index 064a4fe1dd90..28a86224879d 100644 --- a/drivers/net/pasemi_mac_ethtool.c +++ b/drivers/net/pasemi_mac_ethtool.c @@ -71,6 +71,9 @@ pasemi_mac_ethtool_get_settings(struct net_device *netdev, struct pasemi_mac *mac = netdev_priv(netdev); struct phy_device *phydev = mac->phydev; + if (!phydev) + return -EOPNOTSUPP; + return phy_ethtool_gset(phydev, cmd); } diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c index ee8ad3e180dd..b58965a2b3ae 100644 --- a/drivers/net/pcmcia/3c574_cs.c +++ b/drivers/net/pcmcia/3c574_cs.c @@ -251,6 +251,7 @@ static void el3_tx_timeout(struct net_device *dev); static int el3_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); static const struct ethtool_ops netdev_ethtool_ops; static void set_rx_mode(struct net_device *dev); +static void set_multicast_list(struct net_device *dev); static void tc574_detach(struct pcmcia_device *p_dev); @@ -266,7 +267,7 @@ static const struct net_device_ops el3_netdev_ops = { .ndo_tx_timeout = el3_tx_timeout, .ndo_get_stats = el3_get_stats, .ndo_do_ioctl = el3_ioctl, - .ndo_set_multicast_list = set_rx_mode, + .ndo_set_multicast_list = set_multicast_list, .ndo_change_mtu = eth_change_mtu, .ndo_set_mac_address = eth_mac_addr, .ndo_validate_addr = eth_validate_addr, @@ -1161,6 +1162,16 @@ static void set_rx_mode(struct net_device *dev) outw(SetRxFilter | RxStation | RxBroadcast, ioaddr + EL3_CMD); } +static void set_multicast_list(struct net_device *dev) +{ + struct el3_private *lp = netdev_priv(dev); + unsigned long flags; + + spin_lock_irqsave(&lp->window_lock, flags); + set_rx_mode(dev); + spin_unlock_irqrestore(&lp->window_lock, flags); +} + static int el3_close(struct net_device *dev) { unsigned int ioaddr = dev->base_addr; diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c index 474876c879cb..bd3447f04902 100644 --- a/drivers/net/pcmcia/pcnet_cs.c +++ b/drivers/net/pcmcia/pcnet_cs.c @@ -1754,14 +1754,14 @@ static struct pcmcia_device_id pcnet_ids[] = { PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "cis/PCMLM28.cis"), PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "cis/PCMLM28.cis"), PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "cis/PCMLM28.cis"), - PCMCIA_MFC_DEVICE_CIS_PROD_ID12(0, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "DP83903.cis"), - PCMCIA_MFC_DEVICE_CIS_PROD_ID4(0, "NSC MF LAN/Modem", 0x58fc6056, "DP83903.cis"), - PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0175, 0x0000, "DP83903.cis"), + PCMCIA_MFC_DEVICE_CIS_PROD_ID12(0, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "cis/DP83903.cis"), + PCMCIA_MFC_DEVICE_CIS_PROD_ID4(0, "NSC MF LAN/Modem", 0x58fc6056, "cis/DP83903.cis"), + PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0175, 0x0000, "cis/DP83903.cis"), PCMCIA_DEVICE_CIS_MANF_CARD(0xc00f, 0x0002, "cis/LA-PCM.cis"), PCMCIA_DEVICE_CIS_PROD_ID12("KTI", "PE520 PLUS", 0xad180345, 0x9d58d392, "PE520.cis"), - PCMCIA_DEVICE_CIS_PROD_ID12("NDC", "Ethernet", 0x01c43ae1, 0x00b2e941, "NE2K.cis"), + PCMCIA_DEVICE_CIS_PROD_ID12("NDC", "Ethernet", 0x01c43ae1, 0x00b2e941, "cis/NE2K.cis"), PCMCIA_DEVICE_CIS_PROD_ID12("PMX ", "PE-200", 0x34f3f1c8, 0x10b59f8c, "PE-200.cis"), - PCMCIA_DEVICE_CIS_PROD_ID12("TAMARACK", "Ethernet", 0xcf434fba, 0x00b2e941, "tamarack.cis"), + PCMCIA_DEVICE_CIS_PROD_ID12("TAMARACK", "Ethernet", 0xcf434fba, 0x00b2e941, "cis/tamarack.cis"), PCMCIA_DEVICE_PROD_ID12("Ethernet", "CF Size PC Card", 0x00b2e941, 0x43ac239b), PCMCIA_DEVICE_PROD_ID123("Fast Ethernet", "CF Size PC Card", "1.0", 0xb4be14e3, 0x43ac239b, 0x0877b627), diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c index 6d28b18e7e28..c1b3f09f452c 100644 --- a/drivers/net/pcnet32.c +++ b/drivers/net/pcnet32.c @@ -31,6 +31,7 @@ static const char *const version = #include <linux/module.h> #include <linux/kernel.h> +#include <linux/sched.h> #include <linux/string.h> #include <linux/errno.h> #include <linux/ioport.h> diff --git a/drivers/net/phy/mdio-gpio.c b/drivers/net/phy/mdio-gpio.c index 250e10f2c35b..8659d341e769 100644 --- a/drivers/net/phy/mdio-gpio.c +++ b/drivers/net/phy/mdio-gpio.c @@ -238,6 +238,7 @@ static struct of_device_id mdio_ofgpio_match[] = { }, {}, }; +MODULE_DEVICE_TABLE(of, mdio_ofgpio_match); static struct of_platform_driver mdio_ofgpio_driver = { .name = "mdio-gpio", diff --git a/drivers/net/pppol2tp.c b/drivers/net/pppol2tp.c index cc394d073755..5910df60c93e 100644 --- a/drivers/net/pppol2tp.c +++ b/drivers/net/pppol2tp.c @@ -2179,7 +2179,7 @@ static int pppol2tp_session_setsockopt(struct sock *sk, * session or the special tunnel type. */ static int pppol2tp_setsockopt(struct socket *sock, int level, int optname, - char __user *optval, int optlen) + char __user *optval, unsigned int optlen) { struct sock *sk = sock->sk; struct pppol2tp_session *session = sk->sk_user_data; diff --git a/drivers/net/qlge/qlge.h b/drivers/net/qlge/qlge.h index a9845a2f243f..e7285f01bd04 100644 --- a/drivers/net/qlge/qlge.h +++ b/drivers/net/qlge/qlge.h @@ -9,6 +9,7 @@ #include <linux/pci.h> #include <linux/netdevice.h> +#include <linux/rtnetlink.h> /* * General definitions... @@ -135,9 +136,9 @@ enum { RST_FO_TFO = (1 << 0), RST_FO_RR_MASK = 0x00060000, RST_FO_RR_CQ_CAM = 0x00000000, - RST_FO_RR_DROP = 0x00000001, - RST_FO_RR_DQ = 0x00000002, - RST_FO_RR_RCV_FUNC_CQ = 0x00000003, + RST_FO_RR_DROP = 0x00000002, + RST_FO_RR_DQ = 0x00000004, + RST_FO_RR_RCV_FUNC_CQ = 0x00000006, RST_FO_FRB = (1 << 12), RST_FO_MOP = (1 << 13), RST_FO_REG = (1 << 14), @@ -802,6 +803,12 @@ enum { MB_CMD_SET_PORT_CFG = 0x00000122, MB_CMD_GET_PORT_CFG = 0x00000123, MB_CMD_GET_LINK_STS = 0x00000124, + MB_CMD_SET_MGMNT_TFK_CTL = 0x00000160, /* Set Mgmnt Traffic Control */ + MB_SET_MPI_TFK_STOP = (1 << 0), + MB_SET_MPI_TFK_RESUME = (1 << 1), + MB_CMD_GET_MGMNT_TFK_CTL = 0x00000161, /* Get Mgmnt Traffic Control */ + MB_GET_MPI_TFK_STOPPED = (1 << 0), + MB_GET_MPI_TFK_FIFO_EMPTY = (1 << 1), /* Mailbox Command Status. */ MB_CMD_STS_GOOD = 0x00004000, /* Success. */ @@ -1167,7 +1174,7 @@ struct ricb { #define RSS_RI6 0x40 #define RSS_RT6 0x80 __le16 mask; - __le32 hash_cq_id[256]; + u8 hash_cq_id[1024]; __le32 ipv6_hash_key[10]; __le32 ipv4_hash_key[4]; } __attribute((packed)); @@ -1381,15 +1388,15 @@ struct intr_context { /* adapter flags definitions. */ enum { - QL_ADAPTER_UP = (1 << 0), /* Adapter has been brought up. */ - QL_LEGACY_ENABLED = (1 << 3), - QL_MSI_ENABLED = (1 << 3), - QL_MSIX_ENABLED = (1 << 4), - QL_DMA64 = (1 << 5), - QL_PROMISCUOUS = (1 << 6), - QL_ALLMULTI = (1 << 7), - QL_PORT_CFG = (1 << 8), - QL_CAM_RT_SET = (1 << 9), + QL_ADAPTER_UP = 0, /* Adapter has been brought up. */ + QL_LEGACY_ENABLED = 1, + QL_MSI_ENABLED = 2, + QL_MSIX_ENABLED = 3, + QL_DMA64 = 4, + QL_PROMISCUOUS = 5, + QL_ALLMULTI = 6, + QL_PORT_CFG = 7, + QL_CAM_RT_SET = 8, }; /* link_status bit definitions */ @@ -1477,7 +1484,6 @@ struct ql_adapter { u32 mailbox_in; u32 mailbox_out; struct mbox_params idc_mbc; - struct mutex mpi_mutex; int tx_ring_size; int rx_ring_size; @@ -1606,6 +1612,8 @@ int ql_read_mpi_reg(struct ql_adapter *qdev, u32 reg, u32 *data); int ql_mb_about_fw(struct ql_adapter *qdev); void ql_link_on(struct ql_adapter *qdev); void ql_link_off(struct ql_adapter *qdev); +int ql_mb_set_mgmnt_traffic_ctl(struct ql_adapter *qdev, u32 control); +int ql_wait_fifo_empty(struct ql_adapter *qdev); #if 1 #define QL_ALL_DUMP diff --git a/drivers/net/qlge/qlge_ethtool.c b/drivers/net/qlge/qlge_ethtool.c index 68f9bd280f86..52073946bce3 100644 --- a/drivers/net/qlge/qlge_ethtool.c +++ b/drivers/net/qlge/qlge_ethtool.c @@ -45,7 +45,6 @@ static int ql_update_ring_coalescing(struct ql_adapter *qdev) if (!netif_running(qdev->ndev)) return status; - spin_lock(&qdev->hw_lock); /* Skip the default queue, and update the outbound handler * queues if they changed. */ @@ -92,7 +91,6 @@ static int ql_update_ring_coalescing(struct ql_adapter *qdev) } } exit: - spin_unlock(&qdev->hw_lock); return status; } diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c index 7783c5db81dc..48b45df85ec9 100644 --- a/drivers/net/qlge/qlge_main.c +++ b/drivers/net/qlge/qlge_main.c @@ -34,7 +34,6 @@ #include <linux/etherdevice.h> #include <linux/ethtool.h> #include <linux/skbuff.h> -#include <linux/rtnetlink.h> #include <linux/if_vlan.h> #include <linux/delay.h> #include <linux/mm.h> @@ -321,6 +320,37 @@ static int ql_set_mac_addr_reg(struct ql_adapter *qdev, u8 *addr, u32 type, switch (type) { case MAC_ADDR_TYPE_MULTI_MAC: + { + u32 upper = (addr[0] << 8) | addr[1]; + u32 lower = (addr[2] << 24) | (addr[3] << 16) | + (addr[4] << 8) | (addr[5]); + + status = + ql_wait_reg_rdy(qdev, + MAC_ADDR_IDX, MAC_ADDR_MW, 0); + if (status) + goto exit; + ql_write32(qdev, MAC_ADDR_IDX, (offset++) | + (index << MAC_ADDR_IDX_SHIFT) | + type | MAC_ADDR_E); + ql_write32(qdev, MAC_ADDR_DATA, lower); + status = + ql_wait_reg_rdy(qdev, + MAC_ADDR_IDX, MAC_ADDR_MW, 0); + if (status) + goto exit; + ql_write32(qdev, MAC_ADDR_IDX, (offset++) | + (index << MAC_ADDR_IDX_SHIFT) | + type | MAC_ADDR_E); + + ql_write32(qdev, MAC_ADDR_DATA, upper); + status = + ql_wait_reg_rdy(qdev, + MAC_ADDR_IDX, MAC_ADDR_MW, 0); + if (status) + goto exit; + break; + } case MAC_ADDR_TYPE_CAM_MAC: { u32 cam_output; @@ -366,16 +396,14 @@ static int ql_set_mac_addr_reg(struct ql_adapter *qdev, u8 *addr, u32 type, and possibly the function id. Right now we hardcode the route field to NIC core. */ - if (type == MAC_ADDR_TYPE_CAM_MAC) { - cam_output = (CAM_OUT_ROUTE_NIC | - (qdev-> - func << CAM_OUT_FUNC_SHIFT) | - (0 << CAM_OUT_CQ_ID_SHIFT)); - if (qdev->vlgrp) - cam_output |= CAM_OUT_RV; - /* route to NIC core */ - ql_write32(qdev, MAC_ADDR_DATA, cam_output); - } + cam_output = (CAM_OUT_ROUTE_NIC | + (qdev-> + func << CAM_OUT_FUNC_SHIFT) | + (0 << CAM_OUT_CQ_ID_SHIFT)); + if (qdev->vlgrp) + cam_output |= CAM_OUT_RV; + /* route to NIC core */ + ql_write32(qdev, MAC_ADDR_DATA, cam_output); break; } case MAC_ADDR_TYPE_VLAN: @@ -547,14 +575,14 @@ static int ql_set_routing_reg(struct ql_adapter *qdev, u32 index, u32 mask, } case RT_IDX_MCAST: /* Pass up All Multicast frames. */ { - value = RT_IDX_DST_CAM_Q | /* dest */ + value = RT_IDX_DST_DFLT_Q | /* dest */ RT_IDX_TYPE_NICQ | /* type */ (RT_IDX_ALLMULTI_SLOT << RT_IDX_IDX_SHIFT);/* index */ break; } case RT_IDX_MCAST_MATCH: /* Pass up matched Multicast frames. */ { - value = RT_IDX_DST_CAM_Q | /* dest */ + value = RT_IDX_DST_DFLT_Q | /* dest */ RT_IDX_TYPE_NICQ | /* type */ (RT_IDX_MCAST_MATCH_SLOT << RT_IDX_IDX_SHIFT);/* index */ break; @@ -1926,12 +1954,10 @@ static void ql_vlan_rx_add_vid(struct net_device *ndev, u16 vid) status = ql_sem_spinlock(qdev, SEM_MAC_ADDR_MASK); if (status) return; - spin_lock(&qdev->hw_lock); if (ql_set_mac_addr_reg (qdev, (u8 *) &enable_bit, MAC_ADDR_TYPE_VLAN, vid)) { QPRINTK(qdev, IFUP, ERR, "Failed to init vlan address.\n"); } - spin_unlock(&qdev->hw_lock); ql_sem_unlock(qdev, SEM_MAC_ADDR_MASK); } @@ -1945,12 +1971,10 @@ static void ql_vlan_rx_kill_vid(struct net_device *ndev, u16 vid) if (status) return; - spin_lock(&qdev->hw_lock); if (ql_set_mac_addr_reg (qdev, (u8 *) &enable_bit, MAC_ADDR_TYPE_VLAN, vid)) { QPRINTK(qdev, IFUP, ERR, "Failed to clear vlan address.\n"); } - spin_unlock(&qdev->hw_lock); ql_sem_unlock(qdev, SEM_MAC_ADDR_MASK); } @@ -2001,15 +2025,17 @@ static irqreturn_t qlge_isr(int irq, void *dev_id) /* * Check MPI processor activity. */ - if (var & STS_PI) { + if ((var & STS_PI) && + (ql_read32(qdev, INTR_MASK) & INTR_MASK_PI)) { /* * We've got an async event or mailbox completion. * Handle it and clear the source of the interrupt. */ QPRINTK(qdev, INTR, ERR, "Got MPI processor interrupt.\n"); ql_disable_completion_interrupt(qdev, intr_context->intr); - queue_delayed_work_on(smp_processor_id(), qdev->workqueue, - &qdev->mpi_work, 0); + ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16)); + queue_delayed_work_on(smp_processor_id(), + qdev->workqueue, &qdev->mpi_work, 0); work_done++; } @@ -3080,6 +3106,12 @@ err_irq: static int ql_start_rss(struct ql_adapter *qdev) { + u8 init_hash_seed[] = {0x6d, 0x5a, 0x56, 0xda, 0x25, 0x5b, 0x0e, 0xc2, + 0x41, 0x67, 0x25, 0x3d, 0x43, 0xa3, 0x8f, + 0xb0, 0xd0, 0xca, 0x2b, 0xcb, 0xae, 0x7b, + 0x30, 0xb4, 0x77, 0xcb, 0x2d, 0xa3, 0x80, + 0x30, 0xf2, 0x0c, 0x6a, 0x42, 0xb7, 0x3b, + 0xbe, 0xac, 0x01, 0xfa}; struct ricb *ricb = &qdev->ricb; int status = 0; int i; @@ -3089,21 +3121,17 @@ static int ql_start_rss(struct ql_adapter *qdev) ricb->base_cq = RSS_L4K; ricb->flags = - (RSS_L6K | RSS_LI | RSS_LB | RSS_LM | RSS_RI4 | RSS_RI6 | RSS_RT4 | - RSS_RT6); - ricb->mask = cpu_to_le16(qdev->rss_ring_count - 1); + (RSS_L6K | RSS_LI | RSS_LB | RSS_LM | RSS_RT4 | RSS_RT6); + ricb->mask = cpu_to_le16((u16)(0x3ff)); /* * Fill out the Indirection Table. */ - for (i = 0; i < 256; i++) - hash_id[i] = i & (qdev->rss_ring_count - 1); + for (i = 0; i < 1024; i++) + hash_id[i] = (i & (qdev->rss_ring_count - 1)); - /* - * Random values for the IPv6 and IPv4 Hash Keys. - */ - get_random_bytes((void *)&ricb->ipv6_hash_key[0], 40); - get_random_bytes((void *)&ricb->ipv4_hash_key[0], 16); + memcpy((void *)&ricb->ipv6_hash_key[0], init_hash_seed, 40); + memcpy((void *)&ricb->ipv4_hash_key[0], init_hash_seed, 16); QPRINTK(qdev, IFUP, DEBUG, "Initializing RSS.\n"); @@ -3142,14 +3170,14 @@ static int ql_route_initialize(struct ql_adapter *qdev) { int status = 0; - status = ql_sem_spinlock(qdev, SEM_RT_IDX_MASK); + /* Clear all the entries in the routing table. */ + status = ql_clear_routing_entries(qdev); if (status) return status; - /* Clear all the entries in the routing table. */ - status = ql_clear_routing_entries(qdev); + status = ql_sem_spinlock(qdev, SEM_RT_IDX_MASK); if (status) - goto exit; + return status; status = ql_set_routing_reg(qdev, RT_IDX_ALL_ERR_SLOT, RT_IDX_ERR, 1); if (status) { @@ -3242,6 +3270,13 @@ static int ql_adapter_initialize(struct ql_adapter *qdev) ql_write32(qdev, SPLT_HDR, SPLT_HDR_EP | min(SMALL_BUFFER_SIZE, MAX_SPLIT_SIZE)); + /* Set RX packet routing to use port/pci function on which the + * packet arrived on in addition to usual frame routing. + * This is helpful on bonding where both interfaces can have + * the same MAC address. + */ + ql_write32(qdev, RST_FO, RST_FO_RR_MASK | RST_FO_RR_RCV_FUNC_CQ); + /* Start up the rx queues. */ for (i = 0; i < qdev->rx_ring_count; i++) { status = ql_start_rx_ring(qdev, &qdev->rx_ring[i]); @@ -3314,6 +3349,13 @@ static int ql_adapter_reset(struct ql_adapter *qdev) end_jiffies = jiffies + max((unsigned long)1, usecs_to_jiffies(30)); + + /* Stop management traffic. */ + ql_mb_set_mgmnt_traffic_ctl(qdev, MB_SET_MPI_TFK_STOP); + + /* Wait for the NIC and MGMNT FIFOs to empty. */ + ql_wait_fifo_empty(qdev); + ql_write32(qdev, RST_FO, (RST_FO_FR << 16) | RST_FO_FR); do { @@ -3329,6 +3371,8 @@ static int ql_adapter_reset(struct ql_adapter *qdev) status = -ETIMEDOUT; } + /* Resume management traffic. */ + ql_mb_set_mgmnt_traffic_ctl(qdev, MB_SET_MPI_TFK_RESUME); return status; } @@ -3380,12 +3424,10 @@ static int ql_adapter_down(struct ql_adapter *qdev) ql_free_rx_buffers(qdev); - spin_lock(&qdev->hw_lock); status = ql_adapter_reset(qdev); if (status) QPRINTK(qdev, IFDOWN, ERR, "reset(func #%d) FAILED!\n", qdev->func); - spin_unlock(&qdev->hw_lock); return status; } @@ -3587,7 +3629,6 @@ static void qlge_set_multicast_list(struct net_device *ndev) status = ql_sem_spinlock(qdev, SEM_RT_IDX_MASK); if (status) return; - spin_lock(&qdev->hw_lock); /* * Set or clear promiscuous mode if a * transition is taking place. @@ -3664,7 +3705,6 @@ static void qlge_set_multicast_list(struct net_device *ndev) } } exit: - spin_unlock(&qdev->hw_lock); ql_sem_unlock(qdev, SEM_RT_IDX_MASK); } @@ -3684,10 +3724,8 @@ static int qlge_set_mac_address(struct net_device *ndev, void *p) status = ql_sem_spinlock(qdev, SEM_MAC_ADDR_MASK); if (status) return status; - spin_lock(&qdev->hw_lock); status = ql_set_mac_addr_reg(qdev, (u8 *) ndev->dev_addr, MAC_ADDR_TYPE_CAM_MAC, qdev->func * MAX_CQ); - spin_unlock(&qdev->hw_lock); if (status) QPRINTK(qdev, HW, ERR, "Failed to load MAC address.\n"); ql_sem_unlock(qdev, SEM_MAC_ADDR_MASK); @@ -3705,7 +3743,7 @@ static void ql_asic_reset_work(struct work_struct *work) struct ql_adapter *qdev = container_of(work, struct ql_adapter, asic_reset_work.work); int status; - + rtnl_lock(); status = ql_adapter_down(qdev); if (status) goto error; @@ -3714,11 +3752,17 @@ static void ql_asic_reset_work(struct work_struct *work) if (status) goto error; + /* Restore rx mode. */ + clear_bit(QL_ALLMULTI, &qdev->flags); + clear_bit(QL_PROMISCUOUS, &qdev->flags); + qlge_set_multicast_list(qdev->ndev); + + rtnl_unlock(); return; error: QPRINTK(qdev, IFUP, ALERT, "Driver up/down cycle failed, closing device\n"); - rtnl_lock(); + set_bit(QL_ADAPTER_UP, &qdev->flags); dev_close(qdev->ndev); rtnl_unlock(); @@ -3834,11 +3878,14 @@ static int __devinit ql_init_device(struct pci_dev *pdev, return err; } + qdev->ndev = ndev; + qdev->pdev = pdev; + pci_set_drvdata(pdev, ndev); pos = pci_find_capability(pdev, PCI_CAP_ID_EXP); if (pos <= 0) { dev_err(&pdev->dev, PFX "Cannot find PCI Express capability, " "aborting.\n"); - goto err_out; + return pos; } else { pci_read_config_word(pdev, pos + PCI_EXP_DEVCTL, &val16); val16 &= ~PCI_EXP_DEVCTL_NOSNOOP_EN; @@ -3851,7 +3898,7 @@ static int __devinit ql_init_device(struct pci_dev *pdev, err = pci_request_regions(pdev, DRV_NAME); if (err) { dev_err(&pdev->dev, "PCI region request failed.\n"); - goto err_out; + return err; } pci_set_master(pdev); @@ -3869,7 +3916,6 @@ static int __devinit ql_init_device(struct pci_dev *pdev, goto err_out; } - pci_set_drvdata(pdev, ndev); qdev->reg_base = ioremap_nocache(pci_resource_start(pdev, 1), pci_resource_len(pdev, 1)); @@ -3889,8 +3935,6 @@ static int __devinit ql_init_device(struct pci_dev *pdev, goto err_out; } - qdev->ndev = ndev; - qdev->pdev = pdev; err = ql_get_board_info(qdev); if (err) { dev_err(&pdev->dev, "Register access failed.\n"); @@ -3930,7 +3974,6 @@ static int __devinit ql_init_device(struct pci_dev *pdev, INIT_DELAYED_WORK(&qdev->mpi_work, ql_mpi_work); INIT_DELAYED_WORK(&qdev->mpi_port_cfg_work, ql_mpi_port_cfg_work); INIT_DELAYED_WORK(&qdev->mpi_idc_work, ql_mpi_idc_work); - mutex_init(&qdev->mpi_mutex); init_completion(&qdev->ide_completion); if (!cards_found) { diff --git a/drivers/net/qlge/qlge_mpi.c b/drivers/net/qlge/qlge_mpi.c index 6685bd97da91..99e58e3f8e22 100644 --- a/drivers/net/qlge/qlge_mpi.c +++ b/drivers/net/qlge/qlge_mpi.c @@ -472,7 +472,6 @@ static int ql_mailbox_command(struct ql_adapter *qdev, struct mbox_params *mbcp) { int status, count; - mutex_lock(&qdev->mpi_mutex); /* Begin polled mode for MPI */ ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16)); @@ -541,7 +540,6 @@ static int ql_mailbox_command(struct ql_adapter *qdev, struct mbox_params *mbcp) status = -EIO; } end: - mutex_unlock(&qdev->mpi_mutex); /* End polled mode for MPI */ ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16) | INTR_MASK_PI); return status; @@ -770,13 +768,104 @@ static int ql_idc_wait(struct ql_adapter *qdev) return status; } +int ql_mb_set_mgmnt_traffic_ctl(struct ql_adapter *qdev, u32 control) +{ + struct mbox_params mbc; + struct mbox_params *mbcp = &mbc; + int status; + + memset(mbcp, 0, sizeof(struct mbox_params)); + + mbcp->in_count = 1; + mbcp->out_count = 2; + + mbcp->mbox_in[0] = MB_CMD_SET_MGMNT_TFK_CTL; + mbcp->mbox_in[1] = control; + + status = ql_mailbox_command(qdev, mbcp); + if (status) + return status; + + if (mbcp->mbox_out[0] == MB_CMD_STS_GOOD) + return status; + + if (mbcp->mbox_out[0] == MB_CMD_STS_INVLD_CMD) { + QPRINTK(qdev, DRV, ERR, + "Command not supported by firmware.\n"); + status = -EINVAL; + } else if (mbcp->mbox_out[0] == MB_CMD_STS_ERR) { + /* This indicates that the firmware is + * already in the state we are trying to + * change it to. + */ + QPRINTK(qdev, DRV, ERR, + "Command parameters make no change.\n"); + } + return status; +} + +/* Returns a negative error code or the mailbox command status. */ +static int ql_mb_get_mgmnt_traffic_ctl(struct ql_adapter *qdev, u32 *control) +{ + struct mbox_params mbc; + struct mbox_params *mbcp = &mbc; + int status; + + memset(mbcp, 0, sizeof(struct mbox_params)); + *control = 0; + + mbcp->in_count = 1; + mbcp->out_count = 1; + + mbcp->mbox_in[0] = MB_CMD_GET_MGMNT_TFK_CTL; + + status = ql_mailbox_command(qdev, mbcp); + if (status) + return status; + + if (mbcp->mbox_out[0] == MB_CMD_STS_GOOD) { + *control = mbcp->mbox_in[1]; + return status; + } + + if (mbcp->mbox_out[0] == MB_CMD_STS_INVLD_CMD) { + QPRINTK(qdev, DRV, ERR, + "Command not supported by firmware.\n"); + status = -EINVAL; + } else if (mbcp->mbox_out[0] == MB_CMD_STS_ERR) { + QPRINTK(qdev, DRV, ERR, + "Failed to get MPI traffic control.\n"); + status = -EIO; + } + return status; +} + +int ql_wait_fifo_empty(struct ql_adapter *qdev) +{ + int count = 5; + u32 mgmnt_fifo_empty; + u32 nic_fifo_empty; + + do { + nic_fifo_empty = ql_read32(qdev, STS) & STS_NFE; + ql_mb_get_mgmnt_traffic_ctl(qdev, &mgmnt_fifo_empty); + mgmnt_fifo_empty &= MB_GET_MPI_TFK_FIFO_EMPTY; + if (nic_fifo_empty && mgmnt_fifo_empty) + return 0; + msleep(100); + } while (count-- > 0); + return -ETIMEDOUT; +} + /* API called in work thread context to set new TX/RX * maximum frame size values to match MTU. */ static int ql_set_port_cfg(struct ql_adapter *qdev) { int status; + rtnl_lock(); status = ql_mb_set_port_cfg(qdev); + rtnl_unlock(); if (status) return status; status = ql_idc_wait(qdev); @@ -797,7 +886,9 @@ void ql_mpi_port_cfg_work(struct work_struct *work) container_of(work, struct ql_adapter, mpi_port_cfg_work.work); int status; + rtnl_lock(); status = ql_mb_get_port_cfg(qdev); + rtnl_unlock(); if (status) { QPRINTK(qdev, DRV, ERR, "Bug: Failed to get port config data.\n"); @@ -855,7 +946,9 @@ void ql_mpi_idc_work(struct work_struct *work) * needs to be set. * */ set_bit(QL_CAM_RT_SET, &qdev->flags); + rtnl_lock(); status = ql_mb_idc_ack(qdev); + rtnl_unlock(); if (status) { QPRINTK(qdev, DRV, ERR, "Bug: No pending IDC!\n"); @@ -871,7 +964,9 @@ void ql_mpi_work(struct work_struct *work) struct mbox_params *mbcp = &mbc; int err = 0; - mutex_lock(&qdev->mpi_mutex); + rtnl_lock(); + /* Begin polled mode for MPI */ + ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16)); while (ql_read32(qdev, STS) & STS_PI) { memset(mbcp, 0, sizeof(struct mbox_params)); @@ -884,7 +979,9 @@ void ql_mpi_work(struct work_struct *work) break; } - mutex_unlock(&qdev->mpi_mutex); + /* End polled mode for MPI */ + ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16) | INTR_MASK_PI); + rtnl_unlock(); ql_enable_completion_interrupt(qdev, 0); } diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index 50c6a3cfe439..83c47d95c3aa 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -115,7 +115,9 @@ enum mac_version { RTL_GIGA_MAC_VER_22 = 0x16, // 8168C RTL_GIGA_MAC_VER_23 = 0x17, // 8168CP RTL_GIGA_MAC_VER_24 = 0x18, // 8168CP - RTL_GIGA_MAC_VER_25 = 0x19 // 8168D + RTL_GIGA_MAC_VER_25 = 0x19, // 8168D + RTL_GIGA_MAC_VER_26 = 0x1a, // 8168D + RTL_GIGA_MAC_VER_27 = 0x1b // 8168DP }; #define _R(NAME,MAC,MASK) \ @@ -150,7 +152,9 @@ static const struct { _R("RTL8168c/8111c", RTL_GIGA_MAC_VER_22, 0xff7e1880), // PCI-E _R("RTL8168cp/8111cp", RTL_GIGA_MAC_VER_23, 0xff7e1880), // PCI-E _R("RTL8168cp/8111cp", RTL_GIGA_MAC_VER_24, 0xff7e1880), // PCI-E - _R("RTL8168d/8111d", RTL_GIGA_MAC_VER_25, 0xff7e1880) // PCI-E + _R("RTL8168d/8111d", RTL_GIGA_MAC_VER_25, 0xff7e1880), // PCI-E + _R("RTL8168d/8111d", RTL_GIGA_MAC_VER_26, 0xff7e1880), // PCI-E + _R("RTL8168dp/8111dp", RTL_GIGA_MAC_VER_27, 0xff7e1880) // PCI-E }; #undef _R @@ -253,6 +257,13 @@ enum rtl8168_8101_registers { DBG_REG = 0xd1, #define FIX_NAK_1 (1 << 4) #define FIX_NAK_2 (1 << 3) + EFUSEAR = 0xdc, +#define EFUSEAR_FLAG 0x80000000 +#define EFUSEAR_WRITE_CMD 0x80000000 +#define EFUSEAR_READ_CMD 0x00000000 +#define EFUSEAR_REG_MASK 0x03ff +#define EFUSEAR_REG_SHIFT 8 +#define EFUSEAR_DATA_MASK 0xff }; enum rtl_register_content { @@ -568,6 +579,14 @@ static void mdio_patch(void __iomem *ioaddr, int reg_addr, int value) mdio_write(ioaddr, reg_addr, mdio_read(ioaddr, reg_addr) | value); } +static void mdio_plus_minus(void __iomem *ioaddr, int reg_addr, int p, int m) +{ + int val; + + val = mdio_read(ioaddr, reg_addr); + mdio_write(ioaddr, reg_addr, (val | p) & ~m); +} + static void rtl_mdio_write(struct net_device *dev, int phy_id, int location, int val) { @@ -651,6 +670,24 @@ static u32 rtl_csi_read(void __iomem *ioaddr, int addr) return value; } +static u8 rtl8168d_efuse_read(void __iomem *ioaddr, int reg_addr) +{ + u8 value = 0xff; + unsigned int i; + + RTL_W32(EFUSEAR, (reg_addr & EFUSEAR_REG_MASK) << EFUSEAR_REG_SHIFT); + + for (i = 0; i < 300; i++) { + if (RTL_R32(EFUSEAR) & EFUSEAR_FLAG) { + value = RTL_R32(EFUSEAR) & EFUSEAR_DATA_MASK; + break; + } + udelay(100); + } + + return value; +} + static void rtl8169_irq_mask_and_ack(void __iomem *ioaddr) { RTL_W16(IntrMask, 0x0000); @@ -1243,7 +1280,10 @@ static void rtl8169_get_mac_version(struct rtl8169_private *tp, int mac_version; } mac_info[] = { /* 8168D family. */ - { 0x7c800000, 0x28000000, RTL_GIGA_MAC_VER_25 }, + { 0x7cf00000, 0x28300000, RTL_GIGA_MAC_VER_26 }, + { 0x7cf00000, 0x28100000, RTL_GIGA_MAC_VER_25 }, + { 0x7c800000, 0x28800000, RTL_GIGA_MAC_VER_27 }, + { 0x7c800000, 0x28000000, RTL_GIGA_MAC_VER_26 }, /* 8168C family. */ { 0x7cf00000, 0x3ca00000, RTL_GIGA_MAC_VER_24 }, @@ -1648,74 +1688,903 @@ static void rtl8168c_4_hw_phy_config(void __iomem *ioaddr) rtl8168c_3_hw_phy_config(ioaddr); } -static void rtl8168d_hw_phy_config(void __iomem *ioaddr) +static void rtl8168d_1_hw_phy_config(void __iomem *ioaddr) { - struct phy_reg phy_reg_init_0[] = { + static struct phy_reg phy_reg_init_0[] = { { 0x1f, 0x0001 }, - { 0x09, 0x2770 }, - { 0x08, 0x04d0 }, - { 0x0b, 0xad15 }, - { 0x0c, 0x5bf0 }, - { 0x1c, 0xf101 }, + { 0x06, 0x4064 }, + { 0x07, 0x2863 }, + { 0x08, 0x059c }, + { 0x09, 0x26b4 }, + { 0x0a, 0x6a19 }, + { 0x0b, 0xdcc8 }, + { 0x10, 0xf06d }, + { 0x14, 0x7f68 }, + { 0x18, 0x7fd9 }, + { 0x1c, 0xf0ff }, + { 0x1d, 0x3d9c }, { 0x1f, 0x0003 }, - { 0x14, 0x94d7 }, - { 0x12, 0xf4d6 }, - { 0x09, 0xca0f }, - { 0x1f, 0x0002 }, - { 0x0b, 0x0b10 }, - { 0x0c, 0xd1f7 }, - { 0x1f, 0x0002 }, - { 0x06, 0x5461 }, + { 0x12, 0xf49f }, + { 0x13, 0x070b }, + { 0x1a, 0x05ad }, + { 0x14, 0x94c0 } + }; + static struct phy_reg phy_reg_init_1[] = { { 0x1f, 0x0002 }, - { 0x05, 0x6662 }, + { 0x06, 0x5561 }, + { 0x1f, 0x0005 }, + { 0x05, 0x8332 }, + { 0x06, 0x5561 } + }; + static struct phy_reg phy_reg_init_2[] = { + { 0x1f, 0x0005 }, + { 0x05, 0xffc2 }, + { 0x1f, 0x0005 }, + { 0x05, 0x8000 }, + { 0x06, 0xf8f9 }, + { 0x06, 0xfaef }, + { 0x06, 0x59ee }, + { 0x06, 0xf8ea }, + { 0x06, 0x00ee }, + { 0x06, 0xf8eb }, + { 0x06, 0x00e0 }, + { 0x06, 0xf87c }, + { 0x06, 0xe1f8 }, + { 0x06, 0x7d59 }, + { 0x06, 0x0fef }, + { 0x06, 0x0139 }, + { 0x06, 0x029e }, + { 0x06, 0x06ef }, + { 0x06, 0x1039 }, + { 0x06, 0x089f }, + { 0x06, 0x2aee }, + { 0x06, 0xf8ea }, + { 0x06, 0x00ee }, + { 0x06, 0xf8eb }, + { 0x06, 0x01e0 }, + { 0x06, 0xf87c }, + { 0x06, 0xe1f8 }, + { 0x06, 0x7d58 }, + { 0x06, 0x409e }, + { 0x06, 0x0f39 }, + { 0x06, 0x46aa }, + { 0x06, 0x0bbf }, + { 0x06, 0x8290 }, + { 0x06, 0xd682 }, + { 0x06, 0x9802 }, + { 0x06, 0x014f }, + { 0x06, 0xae09 }, + { 0x06, 0xbf82 }, + { 0x06, 0x98d6 }, + { 0x06, 0x82a0 }, + { 0x06, 0x0201 }, + { 0x06, 0x4fef }, + { 0x06, 0x95fe }, + { 0x06, 0xfdfc }, + { 0x06, 0x05f8 }, + { 0x06, 0xf9fa }, + { 0x06, 0xeef8 }, + { 0x06, 0xea00 }, + { 0x06, 0xeef8 }, + { 0x06, 0xeb00 }, + { 0x06, 0xe2f8 }, + { 0x06, 0x7ce3 }, + { 0x06, 0xf87d }, + { 0x06, 0xa511 }, + { 0x06, 0x1112 }, + { 0x06, 0xd240 }, + { 0x06, 0xd644 }, + { 0x06, 0x4402 }, + { 0x06, 0x8217 }, + { 0x06, 0xd2a0 }, + { 0x06, 0xd6aa }, + { 0x06, 0xaa02 }, + { 0x06, 0x8217 }, + { 0x06, 0xae0f }, + { 0x06, 0xa544 }, + { 0x06, 0x4402 }, + { 0x06, 0xae4d }, + { 0x06, 0xa5aa }, + { 0x06, 0xaa02 }, + { 0x06, 0xae47 }, + { 0x06, 0xaf82 }, + { 0x06, 0x13ee }, + { 0x06, 0x834e }, + { 0x06, 0x00ee }, + { 0x06, 0x834d }, + { 0x06, 0x0fee }, + { 0x06, 0x834c }, + { 0x06, 0x0fee }, + { 0x06, 0x834f }, + { 0x06, 0x00ee }, + { 0x06, 0x8351 }, + { 0x06, 0x00ee }, + { 0x06, 0x834a }, + { 0x06, 0xffee }, + { 0x06, 0x834b }, + { 0x06, 0xffe0 }, + { 0x06, 0x8330 }, + { 0x06, 0xe183 }, + { 0x06, 0x3158 }, + { 0x06, 0xfee4 }, + { 0x06, 0xf88a }, + { 0x06, 0xe5f8 }, + { 0x06, 0x8be0 }, + { 0x06, 0x8332 }, + { 0x06, 0xe183 }, + { 0x06, 0x3359 }, + { 0x06, 0x0fe2 }, + { 0x06, 0x834d }, + { 0x06, 0x0c24 }, + { 0x06, 0x5af0 }, + { 0x06, 0x1e12 }, + { 0x06, 0xe4f8 }, + { 0x06, 0x8ce5 }, + { 0x06, 0xf88d }, + { 0x06, 0xaf82 }, + { 0x06, 0x13e0 }, + { 0x06, 0x834f }, + { 0x06, 0x10e4 }, + { 0x06, 0x834f }, + { 0x06, 0xe083 }, + { 0x06, 0x4e78 }, + { 0x06, 0x009f }, + { 0x06, 0x0ae0 }, + { 0x06, 0x834f }, + { 0x06, 0xa010 }, + { 0x06, 0xa5ee }, + { 0x06, 0x834e }, + { 0x06, 0x01e0 }, + { 0x06, 0x834e }, + { 0x06, 0x7805 }, + { 0x06, 0x9e9a }, + { 0x06, 0xe083 }, + { 0x06, 0x4e78 }, + { 0x06, 0x049e }, + { 0x06, 0x10e0 }, + { 0x06, 0x834e }, + { 0x06, 0x7803 }, + { 0x06, 0x9e0f }, + { 0x06, 0xe083 }, + { 0x06, 0x4e78 }, + { 0x06, 0x019e }, + { 0x06, 0x05ae }, + { 0x06, 0x0caf }, + { 0x06, 0x81f8 }, + { 0x06, 0xaf81 }, + { 0x06, 0xa3af }, + { 0x06, 0x81dc }, + { 0x06, 0xaf82 }, + { 0x06, 0x13ee }, + { 0x06, 0x8348 }, + { 0x06, 0x00ee }, + { 0x06, 0x8349 }, + { 0x06, 0x00e0 }, + { 0x06, 0x8351 }, + { 0x06, 0x10e4 }, + { 0x06, 0x8351 }, + { 0x06, 0x5801 }, + { 0x06, 0x9fea }, + { 0x06, 0xd000 }, + { 0x06, 0xd180 }, + { 0x06, 0x1f66 }, + { 0x06, 0xe2f8 }, + { 0x06, 0xeae3 }, + { 0x06, 0xf8eb }, + { 0x06, 0x5af8 }, + { 0x06, 0x1e20 }, + { 0x06, 0xe6f8 }, + { 0x06, 0xeae5 }, + { 0x06, 0xf8eb }, + { 0x06, 0xd302 }, + { 0x06, 0xb3fe }, + { 0x06, 0xe2f8 }, + { 0x06, 0x7cef }, + { 0x06, 0x325b }, + { 0x06, 0x80e3 }, + { 0x06, 0xf87d }, + { 0x06, 0x9e03 }, + { 0x06, 0x7dff }, + { 0x06, 0xff0d }, + { 0x06, 0x581c }, + { 0x06, 0x551a }, + { 0x06, 0x6511 }, + { 0x06, 0xa190 }, + { 0x06, 0xd3e2 }, + { 0x06, 0x8348 }, + { 0x06, 0xe383 }, + { 0x06, 0x491b }, + { 0x06, 0x56ab }, + { 0x06, 0x08ef }, + { 0x06, 0x56e6 }, + { 0x06, 0x8348 }, + { 0x06, 0xe783 }, + { 0x06, 0x4910 }, + { 0x06, 0xd180 }, + { 0x06, 0x1f66 }, + { 0x06, 0xa004 }, + { 0x06, 0xb9e2 }, + { 0x06, 0x8348 }, + { 0x06, 0xe383 }, + { 0x06, 0x49ef }, + { 0x06, 0x65e2 }, + { 0x06, 0x834a }, + { 0x06, 0xe383 }, + { 0x06, 0x4b1b }, + { 0x06, 0x56aa }, + { 0x06, 0x0eef }, + { 0x06, 0x56e6 }, + { 0x06, 0x834a }, + { 0x06, 0xe783 }, + { 0x06, 0x4be2 }, + { 0x06, 0x834d }, + { 0x06, 0xe683 }, + { 0x06, 0x4ce0 }, + { 0x06, 0x834d }, + { 0x06, 0xa000 }, + { 0x06, 0x0caf }, + { 0x06, 0x81dc }, + { 0x06, 0xe083 }, + { 0x06, 0x4d10 }, + { 0x06, 0xe483 }, + { 0x06, 0x4dae }, + { 0x06, 0x0480 }, + { 0x06, 0xe483 }, + { 0x06, 0x4de0 }, + { 0x06, 0x834e }, + { 0x06, 0x7803 }, + { 0x06, 0x9e0b }, + { 0x06, 0xe083 }, + { 0x06, 0x4e78 }, + { 0x06, 0x049e }, + { 0x06, 0x04ee }, + { 0x06, 0x834e }, + { 0x06, 0x02e0 }, + { 0x06, 0x8332 }, + { 0x06, 0xe183 }, + { 0x06, 0x3359 }, + { 0x06, 0x0fe2 }, + { 0x06, 0x834d }, + { 0x06, 0x0c24 }, + { 0x06, 0x5af0 }, + { 0x06, 0x1e12 }, + { 0x06, 0xe4f8 }, + { 0x06, 0x8ce5 }, + { 0x06, 0xf88d }, + { 0x06, 0xe083 }, + { 0x06, 0x30e1 }, + { 0x06, 0x8331 }, + { 0x06, 0x6801 }, + { 0x06, 0xe4f8 }, + { 0x06, 0x8ae5 }, + { 0x06, 0xf88b }, + { 0x06, 0xae37 }, + { 0x06, 0xee83 }, + { 0x06, 0x4e03 }, + { 0x06, 0xe083 }, + { 0x06, 0x4ce1 }, + { 0x06, 0x834d }, + { 0x06, 0x1b01 }, + { 0x06, 0x9e04 }, + { 0x06, 0xaaa1 }, + { 0x06, 0xaea8 }, + { 0x06, 0xee83 }, + { 0x06, 0x4e04 }, + { 0x06, 0xee83 }, + { 0x06, 0x4f00 }, + { 0x06, 0xaeab }, + { 0x06, 0xe083 }, + { 0x06, 0x4f78 }, + { 0x06, 0x039f }, + { 0x06, 0x14ee }, + { 0x06, 0x834e }, + { 0x06, 0x05d2 }, + { 0x06, 0x40d6 }, + { 0x06, 0x5554 }, + { 0x06, 0x0282 }, + { 0x06, 0x17d2 }, + { 0x06, 0xa0d6 }, + { 0x06, 0xba00 }, + { 0x06, 0x0282 }, + { 0x06, 0x17fe }, + { 0x06, 0xfdfc }, + { 0x06, 0x05f8 }, + { 0x06, 0xe0f8 }, + { 0x06, 0x60e1 }, + { 0x06, 0xf861 }, + { 0x06, 0x6802 }, + { 0x06, 0xe4f8 }, + { 0x06, 0x60e5 }, + { 0x06, 0xf861 }, + { 0x06, 0xe0f8 }, + { 0x06, 0x48e1 }, + { 0x06, 0xf849 }, + { 0x06, 0x580f }, + { 0x06, 0x1e02 }, + { 0x06, 0xe4f8 }, + { 0x06, 0x48e5 }, + { 0x06, 0xf849 }, + { 0x06, 0xd000 }, + { 0x06, 0x0282 }, + { 0x06, 0x5bbf }, + { 0x06, 0x8350 }, + { 0x06, 0xef46 }, + { 0x06, 0xdc19 }, + { 0x06, 0xddd0 }, + { 0x06, 0x0102 }, + { 0x06, 0x825b }, + { 0x06, 0x0282 }, + { 0x06, 0x77e0 }, + { 0x06, 0xf860 }, + { 0x06, 0xe1f8 }, + { 0x06, 0x6158 }, + { 0x06, 0xfde4 }, + { 0x06, 0xf860 }, + { 0x06, 0xe5f8 }, + { 0x06, 0x61fc }, + { 0x06, 0x04f9 }, + { 0x06, 0xfafb }, + { 0x06, 0xc6bf }, + { 0x06, 0xf840 }, + { 0x06, 0xbe83 }, + { 0x06, 0x50a0 }, + { 0x06, 0x0101 }, + { 0x06, 0x071b }, + { 0x06, 0x89cf }, + { 0x06, 0xd208 }, + { 0x06, 0xebdb }, + { 0x06, 0x19b2 }, + { 0x06, 0xfbff }, + { 0x06, 0xfefd }, + { 0x06, 0x04f8 }, + { 0x06, 0xe0f8 }, + { 0x06, 0x48e1 }, + { 0x06, 0xf849 }, + { 0x06, 0x6808 }, + { 0x06, 0xe4f8 }, + { 0x06, 0x48e5 }, + { 0x06, 0xf849 }, + { 0x06, 0x58f7 }, + { 0x06, 0xe4f8 }, + { 0x06, 0x48e5 }, + { 0x06, 0xf849 }, + { 0x06, 0xfc04 }, + { 0x06, 0x4d20 }, + { 0x06, 0x0002 }, + { 0x06, 0x4e22 }, + { 0x06, 0x0002 }, + { 0x06, 0x4ddf }, + { 0x06, 0xff01 }, + { 0x06, 0x4edd }, + { 0x06, 0xff01 }, + { 0x05, 0x83d4 }, + { 0x06, 0x8000 }, + { 0x05, 0x83d8 }, + { 0x06, 0x8051 }, + { 0x02, 0x6010 }, + { 0x03, 0xdc00 }, + { 0x05, 0xfff6 }, + { 0x06, 0x00fc }, { 0x1f, 0x0000 }, - { 0x14, 0x0060 }, + { 0x1f, 0x0000 }, - { 0x0d, 0xf8a0 }, + { 0x0d, 0xf880 }, + { 0x1f, 0x0000 } + }; + + rtl_phy_write(ioaddr, phy_reg_init_0, ARRAY_SIZE(phy_reg_init_0)); + + mdio_write(ioaddr, 0x1f, 0x0002); + mdio_plus_minus(ioaddr, 0x0b, 0x0010, 0x00ef); + mdio_plus_minus(ioaddr, 0x0c, 0xa200, 0x5d00); + + rtl_phy_write(ioaddr, phy_reg_init_1, ARRAY_SIZE(phy_reg_init_1)); + + if (rtl8168d_efuse_read(ioaddr, 0x01) == 0xb1) { + struct phy_reg phy_reg_init[] = { + { 0x1f, 0x0002 }, + { 0x05, 0x669a }, + { 0x1f, 0x0005 }, + { 0x05, 0x8330 }, + { 0x06, 0x669a }, + { 0x1f, 0x0002 } + }; + int val; + + rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init)); + + val = mdio_read(ioaddr, 0x0d); + + if ((val & 0x00ff) != 0x006c) { + u32 set[] = { + 0x0065, 0x0066, 0x0067, 0x0068, + 0x0069, 0x006a, 0x006b, 0x006c + }; + int i; + + mdio_write(ioaddr, 0x1f, 0x0002); + + val &= 0xff00; + for (i = 0; i < ARRAY_SIZE(set); i++) + mdio_write(ioaddr, 0x0d, val | set[i]); + } + } else { + struct phy_reg phy_reg_init[] = { + { 0x1f, 0x0002 }, + { 0x05, 0x6662 }, + { 0x1f, 0x0005 }, + { 0x05, 0x8330 }, + { 0x06, 0x6662 } + }; + + rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init)); + } + + mdio_write(ioaddr, 0x1f, 0x0002); + mdio_patch(ioaddr, 0x0d, 0x0300); + mdio_patch(ioaddr, 0x0f, 0x0010); + + mdio_write(ioaddr, 0x1f, 0x0002); + mdio_plus_minus(ioaddr, 0x02, 0x0100, 0x0600); + mdio_plus_minus(ioaddr, 0x03, 0x0000, 0xe000); + + rtl_phy_write(ioaddr, phy_reg_init_2, ARRAY_SIZE(phy_reg_init_2)); +} + +static void rtl8168d_2_hw_phy_config(void __iomem *ioaddr) +{ + static struct phy_reg phy_reg_init_0[] = { + { 0x1f, 0x0001 }, + { 0x06, 0x4064 }, + { 0x07, 0x2863 }, + { 0x08, 0x059c }, + { 0x09, 0x26b4 }, + { 0x0a, 0x6a19 }, + { 0x0b, 0xdcc8 }, + { 0x10, 0xf06d }, + { 0x14, 0x7f68 }, + { 0x18, 0x7fd9 }, + { 0x1c, 0xf0ff }, + { 0x1d, 0x3d9c }, + { 0x1f, 0x0003 }, + { 0x12, 0xf49f }, + { 0x13, 0x070b }, + { 0x1a, 0x05ad }, + { 0x14, 0x94c0 }, + + { 0x1f, 0x0002 }, + { 0x06, 0x5561 }, + { 0x1f, 0x0005 }, + { 0x05, 0x8332 }, + { 0x06, 0x5561 } + }; + static struct phy_reg phy_reg_init_1[] = { + { 0x1f, 0x0005 }, + { 0x05, 0xffc2 }, { 0x1f, 0x0005 }, - { 0x05, 0xffc2 } + { 0x05, 0x8000 }, + { 0x06, 0xf8f9 }, + { 0x06, 0xfaee }, + { 0x06, 0xf8ea }, + { 0x06, 0x00ee }, + { 0x06, 0xf8eb }, + { 0x06, 0x00e2 }, + { 0x06, 0xf87c }, + { 0x06, 0xe3f8 }, + { 0x06, 0x7da5 }, + { 0x06, 0x1111 }, + { 0x06, 0x12d2 }, + { 0x06, 0x40d6 }, + { 0x06, 0x4444 }, + { 0x06, 0x0281 }, + { 0x06, 0xc6d2 }, + { 0x06, 0xa0d6 }, + { 0x06, 0xaaaa }, + { 0x06, 0x0281 }, + { 0x06, 0xc6ae }, + { 0x06, 0x0fa5 }, + { 0x06, 0x4444 }, + { 0x06, 0x02ae }, + { 0x06, 0x4da5 }, + { 0x06, 0xaaaa }, + { 0x06, 0x02ae }, + { 0x06, 0x47af }, + { 0x06, 0x81c2 }, + { 0x06, 0xee83 }, + { 0x06, 0x4e00 }, + { 0x06, 0xee83 }, + { 0x06, 0x4d0f }, + { 0x06, 0xee83 }, + { 0x06, 0x4c0f }, + { 0x06, 0xee83 }, + { 0x06, 0x4f00 }, + { 0x06, 0xee83 }, + { 0x06, 0x5100 }, + { 0x06, 0xee83 }, + { 0x06, 0x4aff }, + { 0x06, 0xee83 }, + { 0x06, 0x4bff }, + { 0x06, 0xe083 }, + { 0x06, 0x30e1 }, + { 0x06, 0x8331 }, + { 0x06, 0x58fe }, + { 0x06, 0xe4f8 }, + { 0x06, 0x8ae5 }, + { 0x06, 0xf88b }, + { 0x06, 0xe083 }, + { 0x06, 0x32e1 }, + { 0x06, 0x8333 }, + { 0x06, 0x590f }, + { 0x06, 0xe283 }, + { 0x06, 0x4d0c }, + { 0x06, 0x245a }, + { 0x06, 0xf01e }, + { 0x06, 0x12e4 }, + { 0x06, 0xf88c }, + { 0x06, 0xe5f8 }, + { 0x06, 0x8daf }, + { 0x06, 0x81c2 }, + { 0x06, 0xe083 }, + { 0x06, 0x4f10 }, + { 0x06, 0xe483 }, + { 0x06, 0x4fe0 }, + { 0x06, 0x834e }, + { 0x06, 0x7800 }, + { 0x06, 0x9f0a }, + { 0x06, 0xe083 }, + { 0x06, 0x4fa0 }, + { 0x06, 0x10a5 }, + { 0x06, 0xee83 }, + { 0x06, 0x4e01 }, + { 0x06, 0xe083 }, + { 0x06, 0x4e78 }, + { 0x06, 0x059e }, + { 0x06, 0x9ae0 }, + { 0x06, 0x834e }, + { 0x06, 0x7804 }, + { 0x06, 0x9e10 }, + { 0x06, 0xe083 }, + { 0x06, 0x4e78 }, + { 0x06, 0x039e }, + { 0x06, 0x0fe0 }, + { 0x06, 0x834e }, + { 0x06, 0x7801 }, + { 0x06, 0x9e05 }, + { 0x06, 0xae0c }, + { 0x06, 0xaf81 }, + { 0x06, 0xa7af }, + { 0x06, 0x8152 }, + { 0x06, 0xaf81 }, + { 0x06, 0x8baf }, + { 0x06, 0x81c2 }, + { 0x06, 0xee83 }, + { 0x06, 0x4800 }, + { 0x06, 0xee83 }, + { 0x06, 0x4900 }, + { 0x06, 0xe083 }, + { 0x06, 0x5110 }, + { 0x06, 0xe483 }, + { 0x06, 0x5158 }, + { 0x06, 0x019f }, + { 0x06, 0xead0 }, + { 0x06, 0x00d1 }, + { 0x06, 0x801f }, + { 0x06, 0x66e2 }, + { 0x06, 0xf8ea }, + { 0x06, 0xe3f8 }, + { 0x06, 0xeb5a }, + { 0x06, 0xf81e }, + { 0x06, 0x20e6 }, + { 0x06, 0xf8ea }, + { 0x06, 0xe5f8 }, + { 0x06, 0xebd3 }, + { 0x06, 0x02b3 }, + { 0x06, 0xfee2 }, + { 0x06, 0xf87c }, + { 0x06, 0xef32 }, + { 0x06, 0x5b80 }, + { 0x06, 0xe3f8 }, + { 0x06, 0x7d9e }, + { 0x06, 0x037d }, + { 0x06, 0xffff }, + { 0x06, 0x0d58 }, + { 0x06, 0x1c55 }, + { 0x06, 0x1a65 }, + { 0x06, 0x11a1 }, + { 0x06, 0x90d3 }, + { 0x06, 0xe283 }, + { 0x06, 0x48e3 }, + { 0x06, 0x8349 }, + { 0x06, 0x1b56 }, + { 0x06, 0xab08 }, + { 0x06, 0xef56 }, + { 0x06, 0xe683 }, + { 0x06, 0x48e7 }, + { 0x06, 0x8349 }, + { 0x06, 0x10d1 }, + { 0x06, 0x801f }, + { 0x06, 0x66a0 }, + { 0x06, 0x04b9 }, + { 0x06, 0xe283 }, + { 0x06, 0x48e3 }, + { 0x06, 0x8349 }, + { 0x06, 0xef65 }, + { 0x06, 0xe283 }, + { 0x06, 0x4ae3 }, + { 0x06, 0x834b }, + { 0x06, 0x1b56 }, + { 0x06, 0xaa0e }, + { 0x06, 0xef56 }, + { 0x06, 0xe683 }, + { 0x06, 0x4ae7 }, + { 0x06, 0x834b }, + { 0x06, 0xe283 }, + { 0x06, 0x4de6 }, + { 0x06, 0x834c }, + { 0x06, 0xe083 }, + { 0x06, 0x4da0 }, + { 0x06, 0x000c }, + { 0x06, 0xaf81 }, + { 0x06, 0x8be0 }, + { 0x06, 0x834d }, + { 0x06, 0x10e4 }, + { 0x06, 0x834d }, + { 0x06, 0xae04 }, + { 0x06, 0x80e4 }, + { 0x06, 0x834d }, + { 0x06, 0xe083 }, + { 0x06, 0x4e78 }, + { 0x06, 0x039e }, + { 0x06, 0x0be0 }, + { 0x06, 0x834e }, + { 0x06, 0x7804 }, + { 0x06, 0x9e04 }, + { 0x06, 0xee83 }, + { 0x06, 0x4e02 }, + { 0x06, 0xe083 }, + { 0x06, 0x32e1 }, + { 0x06, 0x8333 }, + { 0x06, 0x590f }, + { 0x06, 0xe283 }, + { 0x06, 0x4d0c }, + { 0x06, 0x245a }, + { 0x06, 0xf01e }, + { 0x06, 0x12e4 }, + { 0x06, 0xf88c }, + { 0x06, 0xe5f8 }, + { 0x06, 0x8de0 }, + { 0x06, 0x8330 }, + { 0x06, 0xe183 }, + { 0x06, 0x3168 }, + { 0x06, 0x01e4 }, + { 0x06, 0xf88a }, + { 0x06, 0xe5f8 }, + { 0x06, 0x8bae }, + { 0x06, 0x37ee }, + { 0x06, 0x834e }, + { 0x06, 0x03e0 }, + { 0x06, 0x834c }, + { 0x06, 0xe183 }, + { 0x06, 0x4d1b }, + { 0x06, 0x019e }, + { 0x06, 0x04aa }, + { 0x06, 0xa1ae }, + { 0x06, 0xa8ee }, + { 0x06, 0x834e }, + { 0x06, 0x04ee }, + { 0x06, 0x834f }, + { 0x06, 0x00ae }, + { 0x06, 0xabe0 }, + { 0x06, 0x834f }, + { 0x06, 0x7803 }, + { 0x06, 0x9f14 }, + { 0x06, 0xee83 }, + { 0x06, 0x4e05 }, + { 0x06, 0xd240 }, + { 0x06, 0xd655 }, + { 0x06, 0x5402 }, + { 0x06, 0x81c6 }, + { 0x06, 0xd2a0 }, + { 0x06, 0xd6ba }, + { 0x06, 0x0002 }, + { 0x06, 0x81c6 }, + { 0x06, 0xfefd }, + { 0x06, 0xfc05 }, + { 0x06, 0xf8e0 }, + { 0x06, 0xf860 }, + { 0x06, 0xe1f8 }, + { 0x06, 0x6168 }, + { 0x06, 0x02e4 }, + { 0x06, 0xf860 }, + { 0x06, 0xe5f8 }, + { 0x06, 0x61e0 }, + { 0x06, 0xf848 }, + { 0x06, 0xe1f8 }, + { 0x06, 0x4958 }, + { 0x06, 0x0f1e }, + { 0x06, 0x02e4 }, + { 0x06, 0xf848 }, + { 0x06, 0xe5f8 }, + { 0x06, 0x49d0 }, + { 0x06, 0x0002 }, + { 0x06, 0x820a }, + { 0x06, 0xbf83 }, + { 0x06, 0x50ef }, + { 0x06, 0x46dc }, + { 0x06, 0x19dd }, + { 0x06, 0xd001 }, + { 0x06, 0x0282 }, + { 0x06, 0x0a02 }, + { 0x06, 0x8226 }, + { 0x06, 0xe0f8 }, + { 0x06, 0x60e1 }, + { 0x06, 0xf861 }, + { 0x06, 0x58fd }, + { 0x06, 0xe4f8 }, + { 0x06, 0x60e5 }, + { 0x06, 0xf861 }, + { 0x06, 0xfc04 }, + { 0x06, 0xf9fa }, + { 0x06, 0xfbc6 }, + { 0x06, 0xbff8 }, + { 0x06, 0x40be }, + { 0x06, 0x8350 }, + { 0x06, 0xa001 }, + { 0x06, 0x0107 }, + { 0x06, 0x1b89 }, + { 0x06, 0xcfd2 }, + { 0x06, 0x08eb }, + { 0x06, 0xdb19 }, + { 0x06, 0xb2fb }, + { 0x06, 0xfffe }, + { 0x06, 0xfd04 }, + { 0x06, 0xf8e0 }, + { 0x06, 0xf848 }, + { 0x06, 0xe1f8 }, + { 0x06, 0x4968 }, + { 0x06, 0x08e4 }, + { 0x06, 0xf848 }, + { 0x06, 0xe5f8 }, + { 0x06, 0x4958 }, + { 0x06, 0xf7e4 }, + { 0x06, 0xf848 }, + { 0x06, 0xe5f8 }, + { 0x06, 0x49fc }, + { 0x06, 0x044d }, + { 0x06, 0x2000 }, + { 0x06, 0x024e }, + { 0x06, 0x2200 }, + { 0x06, 0x024d }, + { 0x06, 0xdfff }, + { 0x06, 0x014e }, + { 0x06, 0xddff }, + { 0x06, 0x0100 }, + { 0x05, 0x83d8 }, + { 0x06, 0x8000 }, + { 0x03, 0xdc00 }, + { 0x05, 0xfff6 }, + { 0x06, 0x00fc }, + { 0x1f, 0x0000 }, + + { 0x1f, 0x0000 }, + { 0x0d, 0xf880 }, + { 0x1f, 0x0000 } }; rtl_phy_write(ioaddr, phy_reg_init_0, ARRAY_SIZE(phy_reg_init_0)); - if (mdio_read(ioaddr, 0x06) == 0xc400) { - struct phy_reg phy_reg_init_1[] = { + if (rtl8168d_efuse_read(ioaddr, 0x01) == 0xb1) { + struct phy_reg phy_reg_init[] = { + { 0x1f, 0x0002 }, + { 0x05, 0x669a }, { 0x1f, 0x0005 }, - { 0x01, 0x0300 }, - { 0x1f, 0x0000 }, - { 0x11, 0x401c }, - { 0x16, 0x4100 }, + { 0x05, 0x8330 }, + { 0x06, 0x669a }, + + { 0x1f, 0x0002 } + }; + int val; + + rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init)); + + val = mdio_read(ioaddr, 0x0d); + if ((val & 0x00ff) != 0x006c) { + u32 set[] = { + 0x0065, 0x0066, 0x0067, 0x0068, + 0x0069, 0x006a, 0x006b, 0x006c + }; + int i; + + mdio_write(ioaddr, 0x1f, 0x0002); + + val &= 0xff00; + for (i = 0; i < ARRAY_SIZE(set); i++) + mdio_write(ioaddr, 0x0d, val | set[i]); + } + } else { + struct phy_reg phy_reg_init[] = { + { 0x1f, 0x0002 }, + { 0x05, 0x2642 }, { 0x1f, 0x0005 }, - { 0x07, 0x0010 }, - { 0x05, 0x83dc }, - { 0x06, 0x087d }, - { 0x05, 0x8300 }, - { 0x06, 0x0101 }, - { 0x06, 0x05f8 }, - { 0x06, 0xf9fa }, - { 0x06, 0xfbef }, - { 0x06, 0x79e2 }, - { 0x06, 0x835f }, - { 0x06, 0xe0f8 }, - { 0x06, 0x9ae1 }, - { 0x06, 0xf89b }, - { 0x06, 0xef31 }, - { 0x06, 0x3b65 }, - { 0x06, 0xaa07 }, - { 0x06, 0x81e4 }, - { 0x06, 0xf89a }, - { 0x06, 0xe5f8 }, - { 0x06, 0x9baf }, - { 0x06, 0x06ae }, - { 0x05, 0x83dc }, - { 0x06, 0x8300 }, + { 0x05, 0x8330 }, + { 0x06, 0x2642 } }; - rtl_phy_write(ioaddr, phy_reg_init_1, - ARRAY_SIZE(phy_reg_init_1)); + rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init)); } - mdio_write(ioaddr, 0x1f, 0x0000); + mdio_write(ioaddr, 0x1f, 0x0002); + mdio_plus_minus(ioaddr, 0x02, 0x0100, 0x0600); + mdio_plus_minus(ioaddr, 0x03, 0x0000, 0xe000); + + mdio_write(ioaddr, 0x1f, 0x0001); + mdio_write(ioaddr, 0x17, 0x0cc0); + + mdio_write(ioaddr, 0x1f, 0x0002); + mdio_patch(ioaddr, 0x0f, 0x0017); + + rtl_phy_write(ioaddr, phy_reg_init_1, ARRAY_SIZE(phy_reg_init_1)); +} + +static void rtl8168d_3_hw_phy_config(void __iomem *ioaddr) +{ + struct phy_reg phy_reg_init[] = { + { 0x1f, 0x0002 }, + { 0x10, 0x0008 }, + { 0x0d, 0x006c }, + + { 0x1f, 0x0000 }, + { 0x0d, 0xf880 }, + + { 0x1f, 0x0001 }, + { 0x17, 0x0cc0 }, + + { 0x1f, 0x0001 }, + { 0x0b, 0xa4d8 }, + { 0x09, 0x281c }, + { 0x07, 0x2883 }, + { 0x0a, 0x6b35 }, + { 0x1d, 0x3da4 }, + { 0x1c, 0xeffd }, + { 0x14, 0x7f52 }, + { 0x18, 0x7fc6 }, + { 0x08, 0x0601 }, + { 0x06, 0x4063 }, + { 0x10, 0xf074 }, + { 0x1f, 0x0003 }, + { 0x13, 0x0789 }, + { 0x12, 0xf4bd }, + { 0x1a, 0x04fd }, + { 0x14, 0x84b0 }, + { 0x1f, 0x0000 }, + { 0x00, 0x9200 }, + + { 0x1f, 0x0005 }, + { 0x01, 0x0340 }, + { 0x1f, 0x0001 }, + { 0x04, 0x4000 }, + { 0x03, 0x1d21 }, + { 0x02, 0x0c32 }, + { 0x01, 0x0200 }, + { 0x00, 0x5554 }, + { 0x04, 0x4800 }, + { 0x04, 0x4000 }, + { 0x04, 0xf000 }, + { 0x03, 0xdf01 }, + { 0x02, 0xdf20 }, + { 0x01, 0x101a }, + { 0x00, 0xa0ff }, + { 0x04, 0xf800 }, + { 0x04, 0xf000 }, + { 0x1f, 0x0000 }, + + { 0x1f, 0x0007 }, + { 0x1e, 0x0023 }, + { 0x16, 0x0000 }, + { 0x1f, 0x0000 } + }; + + rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init)); } static void rtl8102e_hw_phy_config(void __iomem *ioaddr) @@ -1792,7 +2661,13 @@ static void rtl_hw_phy_config(struct net_device *dev) rtl8168cp_2_hw_phy_config(ioaddr); break; case RTL_GIGA_MAC_VER_25: - rtl8168d_hw_phy_config(ioaddr); + rtl8168d_1_hw_phy_config(ioaddr); + break; + case RTL_GIGA_MAC_VER_26: + rtl8168d_2_hw_phy_config(ioaddr); + break; + case RTL_GIGA_MAC_VER_27: + rtl8168d_3_hw_phy_config(ioaddr); break; default: @@ -2863,6 +3738,8 @@ static void rtl_hw_start_8168(struct net_device *dev) break; case RTL_GIGA_MAC_VER_25: + case RTL_GIGA_MAC_VER_26: + case RTL_GIGA_MAC_VER_27: rtl_hw_start_8168d(ioaddr, pdev); break; diff --git a/drivers/net/sb1000.c b/drivers/net/sb1000.c index ee366c5a8fa3..c9c70ab0cce0 100644 --- a/drivers/net/sb1000.c +++ b/drivers/net/sb1000.c @@ -36,6 +36,7 @@ static char version[] = "sb1000.c:v1.1.2 6/01/98 (fventuri@mediaone.net)\n"; #include <linux/module.h> #include <linux/kernel.h> +#include <linux/sched.h> #include <linux/string.h> #include <linux/interrupt.h> #include <linux/errno.h> diff --git a/drivers/net/sgiseeq.c b/drivers/net/sgiseeq.c index ecf3279fbef5..f4dfd1f679a9 100644 --- a/drivers/net/sgiseeq.c +++ b/drivers/net/sgiseeq.c @@ -826,7 +826,7 @@ static int __exit sgiseeq_remove(struct platform_device *pdev) static struct platform_driver sgiseeq_driver = { .probe = sgiseeq_probe, - .remove = __devexit_p(sgiseeq_remove), + .remove = __exit_p(sgiseeq_remove), .driver = { .name = "sgiseeq", .owner = THIS_MODULE, diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c index 97949d0a699b..c072f7f36acf 100644 --- a/drivers/net/sis900.c +++ b/drivers/net/sis900.c @@ -52,6 +52,7 @@ #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/kernel.h> +#include <linux/sched.h> #include <linux/string.h> #include <linux/timer.h> #include <linux/errno.h> diff --git a/drivers/net/skfp/skfddi.c b/drivers/net/skfp/skfddi.c index 38a508b4aad9..b27156eaf267 100644 --- a/drivers/net/skfp/skfddi.c +++ b/drivers/net/skfp/skfddi.c @@ -73,6 +73,7 @@ static const char * const boot_msg = /* Include files */ +#include <linux/capability.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/errno.h> diff --git a/drivers/net/skge.c b/drivers/net/skge.c index 55bad4081966..8f5414348e86 100644 --- a/drivers/net/skge.c +++ b/drivers/net/skge.c @@ -37,6 +37,7 @@ #include <linux/crc32.h> #include <linux/dma-mapping.h> #include <linux/debugfs.h> +#include <linux/sched.h> #include <linux/seq_file.h> #include <linux/mii.h> #include <asm/irq.h> @@ -3935,11 +3936,14 @@ static int __devinit skge_probe(struct pci_dev *pdev, #endif err = -ENOMEM; - hw = kzalloc(sizeof(*hw), GFP_KERNEL); + /* space for skge@pci:0000:04:00.0 */ + hw = kzalloc(sizeof(*hw) + strlen(DRV_NAME "@pci:" ) + + strlen(pci_name(pdev)) + 1, GFP_KERNEL); if (!hw) { dev_err(&pdev->dev, "cannot allocate hardware struct\n"); goto err_out_free_regions; } + sprintf(hw->irq_name, DRV_NAME "@pci:%s", pci_name(pdev)); hw->pdev = pdev; spin_lock_init(&hw->hw_lock); @@ -3974,7 +3978,7 @@ static int __devinit skge_probe(struct pci_dev *pdev, goto err_out_free_netdev; } - err = request_irq(pdev->irq, skge_intr, IRQF_SHARED, dev->name, hw); + err = request_irq(pdev->irq, skge_intr, IRQF_SHARED, hw->irq_name, hw); if (err) { dev_err(&pdev->dev, "%s: cannot assign irq %d\n", dev->name, pdev->irq); @@ -3982,14 +3986,17 @@ static int __devinit skge_probe(struct pci_dev *pdev, } skge_show_addr(dev); - if (hw->ports > 1 && (dev1 = skge_devinit(hw, 1, using_dac))) { - if (register_netdev(dev1) == 0) + if (hw->ports > 1) { + dev1 = skge_devinit(hw, 1, using_dac); + if (dev1 && register_netdev(dev1) == 0) skge_show_addr(dev1); else { /* Failure to register second port need not be fatal */ dev_warn(&pdev->dev, "register of second port failed\n"); hw->dev[1] = NULL; - free_netdev(dev1); + hw->ports = 1; + if (dev1) + free_netdev(dev1); } } pci_set_drvdata(pdev, hw); diff --git a/drivers/net/skge.h b/drivers/net/skge.h index 17caccbb7685..831de1b6e96e 100644 --- a/drivers/net/skge.h +++ b/drivers/net/skge.h @@ -2423,6 +2423,8 @@ struct skge_hw { u16 phy_addr; spinlock_t phy_lock; struct tasklet_struct phy_task; + + char irq_name[0]; /* skge@pci:000:04:00.0 */ }; enum pause_control { diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index ef1165718dd7..2ab5c39f33ca 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -4487,13 +4487,16 @@ static int __devinit sky2_probe(struct pci_dev *pdev, wol_default = device_may_wakeup(&pdev->dev) ? WAKE_MAGIC : 0; err = -ENOMEM; - hw = kzalloc(sizeof(*hw), GFP_KERNEL); + + hw = kzalloc(sizeof(*hw) + strlen(DRV_NAME "@pci:") + + strlen(pci_name(pdev)) + 1, GFP_KERNEL); if (!hw) { dev_err(&pdev->dev, "cannot allocate hardware struct\n"); goto err_out_free_regions; } hw->pdev = pdev; + sprintf(hw->irq_name, DRV_NAME "@pci:%s", pci_name(pdev)); hw->regs = ioremap_nocache(pci_resource_start(pdev, 0), 0x4000); if (!hw->regs) { @@ -4539,7 +4542,7 @@ static int __devinit sky2_probe(struct pci_dev *pdev, err = request_irq(pdev->irq, sky2_intr, (hw->flags & SKY2_HW_USE_MSI) ? 0 : IRQF_SHARED, - dev->name, hw); + hw->irq_name, hw); if (err) { dev_err(&pdev->dev, "cannot assign irq %d\n", pdev->irq); goto err_out_unregister; diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h index e0f23a101043..ed54129698b4 100644 --- a/drivers/net/sky2.h +++ b/drivers/net/sky2.h @@ -2085,6 +2085,8 @@ struct sky2_hw { struct timer_list watchdog_timer; struct work_struct restart_work; wait_queue_head_t msi_wait; + + char irq_name[0]; }; static inline int sky2_is_copper(const struct sky2_hw *hw) diff --git a/drivers/net/slip.c b/drivers/net/slip.c index e17c535a577e..fe3cebb984de 100644 --- a/drivers/net/slip.c +++ b/drivers/net/slip.c @@ -67,6 +67,7 @@ #include <asm/system.h> #include <asm/uaccess.h> #include <linux/bitops.h> +#include <linux/sched.h> #include <linux/string.h> #include <linux/mm.h> #include <linux/interrupt.h> diff --git a/drivers/net/stmmac/Kconfig b/drivers/net/stmmac/Kconfig new file mode 100644 index 000000000000..35eaa5251d7f --- /dev/null +++ b/drivers/net/stmmac/Kconfig @@ -0,0 +1,53 @@ +config STMMAC_ETH + tristate "STMicroelectronics 10/100/1000 Ethernet driver" + select MII + select PHYLIB + depends on NETDEVICES && CPU_SUBTYPE_ST40 + help + This is the driver for the ST MAC 10/100/1000 on-chip Ethernet + controllers. ST Ethernet IPs are built around a Synopsys IP Core. + +if STMMAC_ETH + +config STMMAC_DA + bool "STMMAC DMA arbitration scheme" + default n + help + Selecting this option, rx has priority over Tx (only for Giga + Ethernet device). + By default, the DMA arbitration scheme is based on Round-robin + (rx:tx priority is 1:1). + +config STMMAC_DUAL_MAC + bool "STMMAC: dual mac support (EXPERIMENTAL)" + default n + depends on EXPERIMENTAL && STMMAC_ETH && !STMMAC_TIMER + help + Some ST SoCs (for example the stx7141 and stx7200c2) have two + Ethernet Controllers. This option turns on the second Ethernet + device on this kind of platforms. + +config STMMAC_TIMER + bool "STMMAC Timer optimisation" + default n + help + Use an external timer for mitigating the number of network + interrupts. + +choice + prompt "Select Timer device" + depends on STMMAC_TIMER + +config STMMAC_TMU_TIMER + bool "TMU channel 2" + depends on CPU_SH4 + help + +config STMMAC_RTC_TIMER + bool "Real time clock" + depends on RTC_CLASS + help + +endchoice + +endif diff --git a/drivers/net/stmmac/Makefile b/drivers/net/stmmac/Makefile new file mode 100644 index 000000000000..b2d7a5564dfa --- /dev/null +++ b/drivers/net/stmmac/Makefile @@ -0,0 +1,4 @@ +obj-$(CONFIG_STMMAC_ETH) += stmmac.o +stmmac-$(CONFIG_STMMAC_TIMER) += stmmac_timer.o +stmmac-objs:= stmmac_main.o stmmac_ethtool.o stmmac_mdio.o \ + mac100.o gmac.o $(stmmac-y) diff --git a/drivers/net/stmmac/common.h b/drivers/net/stmmac/common.h new file mode 100644 index 000000000000..e49e5188e887 --- /dev/null +++ b/drivers/net/stmmac/common.h @@ -0,0 +1,330 @@ +/******************************************************************************* + STMMAC Common Header File + + Copyright (C) 2007-2009 STMicroelectronics Ltd + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> +*******************************************************************************/ + +#include "descs.h" +#include <linux/io.h> + +/* ********************************************* + DMA CRS Control and Status Register Mapping + * *********************************************/ +#define DMA_BUS_MODE 0x00001000 /* Bus Mode */ +#define DMA_XMT_POLL_DEMAND 0x00001004 /* Transmit Poll Demand */ +#define DMA_RCV_POLL_DEMAND 0x00001008 /* Received Poll Demand */ +#define DMA_RCV_BASE_ADDR 0x0000100c /* Receive List Base */ +#define DMA_TX_BASE_ADDR 0x00001010 /* Transmit List Base */ +#define DMA_STATUS 0x00001014 /* Status Register */ +#define DMA_CONTROL 0x00001018 /* Ctrl (Operational Mode) */ +#define DMA_INTR_ENA 0x0000101c /* Interrupt Enable */ +#define DMA_MISSED_FRAME_CTR 0x00001020 /* Missed Frame Counter */ +#define DMA_CUR_TX_BUF_ADDR 0x00001050 /* Current Host Tx Buffer */ +#define DMA_CUR_RX_BUF_ADDR 0x00001054 /* Current Host Rx Buffer */ + +/* ******************************** + DMA Control register defines + * ********************************/ +#define DMA_CONTROL_ST 0x00002000 /* Start/Stop Transmission */ +#define DMA_CONTROL_SR 0x00000002 /* Start/Stop Receive */ + +/* ************************************** + DMA Interrupt Enable register defines + * **************************************/ +/**** NORMAL INTERRUPT ****/ +#define DMA_INTR_ENA_NIE 0x00010000 /* Normal Summary */ +#define DMA_INTR_ENA_TIE 0x00000001 /* Transmit Interrupt */ +#define DMA_INTR_ENA_TUE 0x00000004 /* Transmit Buffer Unavailable */ +#define DMA_INTR_ENA_RIE 0x00000040 /* Receive Interrupt */ +#define DMA_INTR_ENA_ERE 0x00004000 /* Early Receive */ + +#define DMA_INTR_NORMAL (DMA_INTR_ENA_NIE | DMA_INTR_ENA_RIE | \ + DMA_INTR_ENA_TIE) + +/**** ABNORMAL INTERRUPT ****/ +#define DMA_INTR_ENA_AIE 0x00008000 /* Abnormal Summary */ +#define DMA_INTR_ENA_FBE 0x00002000 /* Fatal Bus Error */ +#define DMA_INTR_ENA_ETE 0x00000400 /* Early Transmit */ +#define DMA_INTR_ENA_RWE 0x00000200 /* Receive Watchdog */ +#define DMA_INTR_ENA_RSE 0x00000100 /* Receive Stopped */ +#define DMA_INTR_ENA_RUE 0x00000080 /* Receive Buffer Unavailable */ +#define DMA_INTR_ENA_UNE 0x00000020 /* Tx Underflow */ +#define DMA_INTR_ENA_OVE 0x00000010 /* Receive Overflow */ +#define DMA_INTR_ENA_TJE 0x00000008 /* Transmit Jabber */ +#define DMA_INTR_ENA_TSE 0x00000002 /* Transmit Stopped */ + +#define DMA_INTR_ABNORMAL (DMA_INTR_ENA_AIE | DMA_INTR_ENA_FBE | \ + DMA_INTR_ENA_UNE) + +/* DMA default interrupt mask */ +#define DMA_INTR_DEFAULT_MASK (DMA_INTR_NORMAL | DMA_INTR_ABNORMAL) + +/* **************************** + * DMA Status register defines + * ****************************/ +#define DMA_STATUS_GPI 0x10000000 /* PMT interrupt */ +#define DMA_STATUS_GMI 0x08000000 /* MMC interrupt */ +#define DMA_STATUS_GLI 0x04000000 /* GMAC Line interface int. */ +#define DMA_STATUS_GMI 0x08000000 +#define DMA_STATUS_GLI 0x04000000 +#define DMA_STATUS_EB_MASK 0x00380000 /* Error Bits Mask */ +#define DMA_STATUS_EB_TX_ABORT 0x00080000 /* Error Bits - TX Abort */ +#define DMA_STATUS_EB_RX_ABORT 0x00100000 /* Error Bits - RX Abort */ +#define DMA_STATUS_TS_MASK 0x00700000 /* Transmit Process State */ +#define DMA_STATUS_TS_SHIFT 20 +#define DMA_STATUS_RS_MASK 0x000e0000 /* Receive Process State */ +#define DMA_STATUS_RS_SHIFT 17 +#define DMA_STATUS_NIS 0x00010000 /* Normal Interrupt Summary */ +#define DMA_STATUS_AIS 0x00008000 /* Abnormal Interrupt Summary */ +#define DMA_STATUS_ERI 0x00004000 /* Early Receive Interrupt */ +#define DMA_STATUS_FBI 0x00002000 /* Fatal Bus Error Interrupt */ +#define DMA_STATUS_ETI 0x00000400 /* Early Transmit Interrupt */ +#define DMA_STATUS_RWT 0x00000200 /* Receive Watchdog Timeout */ +#define DMA_STATUS_RPS 0x00000100 /* Receive Process Stopped */ +#define DMA_STATUS_RU 0x00000080 /* Receive Buffer Unavailable */ +#define DMA_STATUS_RI 0x00000040 /* Receive Interrupt */ +#define DMA_STATUS_UNF 0x00000020 /* Transmit Underflow */ +#define DMA_STATUS_OVF 0x00000010 /* Receive Overflow */ +#define DMA_STATUS_TJT 0x00000008 /* Transmit Jabber Timeout */ +#define DMA_STATUS_TU 0x00000004 /* Transmit Buffer Unavailable */ +#define DMA_STATUS_TPS 0x00000002 /* Transmit Process Stopped */ +#define DMA_STATUS_TI 0x00000001 /* Transmit Interrupt */ + +/* Other defines */ +#define HASH_TABLE_SIZE 64 +#define PAUSE_TIME 0x200 + +/* Flow Control defines */ +#define FLOW_OFF 0 +#define FLOW_RX 1 +#define FLOW_TX 2 +#define FLOW_AUTO (FLOW_TX | FLOW_RX) + +/* DMA STORE-AND-FORWARD Operation Mode */ +#define SF_DMA_MODE 1 + +#define HW_CSUM 1 +#define NO_HW_CSUM 0 + +/* GMAC TX FIFO is 8K, Rx FIFO is 16K */ +#define BUF_SIZE_16KiB 16384 +#define BUF_SIZE_8KiB 8192 +#define BUF_SIZE_4KiB 4096 +#define BUF_SIZE_2KiB 2048 + +/* Power Down and WOL */ +#define PMT_NOT_SUPPORTED 0 +#define PMT_SUPPORTED 1 + +/* Common MAC defines */ +#define MAC_CTRL_REG 0x00000000 /* MAC Control */ +#define MAC_ENABLE_TX 0x00000008 /* Transmitter Enable */ +#define MAC_RNABLE_RX 0x00000004 /* Receiver Enable */ + +/* MAC Management Counters register */ +#define MMC_CONTROL 0x00000100 /* MMC Control */ +#define MMC_HIGH_INTR 0x00000104 /* MMC High Interrupt */ +#define MMC_LOW_INTR 0x00000108 /* MMC Low Interrupt */ +#define MMC_HIGH_INTR_MASK 0x0000010c /* MMC High Interrupt Mask */ +#define MMC_LOW_INTR_MASK 0x00000110 /* MMC Low Interrupt Mask */ + +#define MMC_CONTROL_MAX_FRM_MASK 0x0003ff8 /* Maximum Frame Size */ +#define MMC_CONTROL_MAX_FRM_SHIFT 3 +#define MMC_CONTROL_MAX_FRAME 0x7FF + +struct stmmac_extra_stats { + /* Transmit errors */ + unsigned long tx_underflow ____cacheline_aligned; + unsigned long tx_carrier; + unsigned long tx_losscarrier; + unsigned long tx_heartbeat; + unsigned long tx_deferred; + unsigned long tx_vlan; + unsigned long tx_jabber; + unsigned long tx_frame_flushed; + unsigned long tx_payload_error; + unsigned long tx_ip_header_error; + /* Receive errors */ + unsigned long rx_desc; + unsigned long rx_partial; + unsigned long rx_runt; + unsigned long rx_toolong; + unsigned long rx_collision; + unsigned long rx_crc; + unsigned long rx_lenght; + unsigned long rx_mii; + unsigned long rx_multicast; + unsigned long rx_gmac_overflow; + unsigned long rx_watchdog; + unsigned long da_rx_filter_fail; + unsigned long sa_rx_filter_fail; + unsigned long rx_missed_cntr; + unsigned long rx_overflow_cntr; + unsigned long rx_vlan; + /* Tx/Rx IRQ errors */ + unsigned long tx_undeflow_irq; + unsigned long tx_process_stopped_irq; + unsigned long tx_jabber_irq; + unsigned long rx_overflow_irq; + unsigned long rx_buf_unav_irq; + unsigned long rx_process_stopped_irq; + unsigned long rx_watchdog_irq; + unsigned long tx_early_irq; + unsigned long fatal_bus_error_irq; + /* Extra info */ + unsigned long threshold; + unsigned long tx_pkt_n; + unsigned long rx_pkt_n; + unsigned long poll_n; + unsigned long sched_timer_n; + unsigned long normal_irq_n; +}; + +/* GMAC core can compute the checksums in HW. */ +enum rx_frame_status { + good_frame = 0, + discard_frame = 1, + csum_none = 2, +}; + +static inline void stmmac_set_mac_addr(unsigned long ioaddr, u8 addr[6], + unsigned int high, unsigned int low) +{ + unsigned long data; + + data = (addr[5] << 8) | addr[4]; + writel(data, ioaddr + high); + data = (addr[3] << 24) | (addr[2] << 16) | (addr[1] << 8) | addr[0]; + writel(data, ioaddr + low); + + return; +} + +static inline void stmmac_get_mac_addr(unsigned long ioaddr, + unsigned char *addr, unsigned int high, + unsigned int low) +{ + unsigned int hi_addr, lo_addr; + + /* Read the MAC address from the hardware */ + hi_addr = readl(ioaddr + high); + lo_addr = readl(ioaddr + low); + + /* Extract the MAC address from the high and low words */ + addr[0] = lo_addr & 0xff; + addr[1] = (lo_addr >> 8) & 0xff; + addr[2] = (lo_addr >> 16) & 0xff; + addr[3] = (lo_addr >> 24) & 0xff; + addr[4] = hi_addr & 0xff; + addr[5] = (hi_addr >> 8) & 0xff; + + return; +} + +struct stmmac_ops { + /* MAC core initialization */ + void (*core_init) (unsigned long ioaddr) ____cacheline_aligned; + /* DMA core initialization */ + int (*dma_init) (unsigned long ioaddr, int pbl, u32 dma_tx, u32 dma_rx); + /* Dump MAC registers */ + void (*dump_mac_regs) (unsigned long ioaddr); + /* Dump DMA registers */ + void (*dump_dma_regs) (unsigned long ioaddr); + /* Set tx/rx threshold in the csr6 register + * An invalid value enables the store-and-forward mode */ + void (*dma_mode) (unsigned long ioaddr, int txmode, int rxmode); + /* To track extra statistic (if supported) */ + void (*dma_diagnostic_fr) (void *data, struct stmmac_extra_stats *x, + unsigned long ioaddr); + /* RX descriptor ring initialization */ + void (*init_rx_desc) (struct dma_desc *p, unsigned int ring_size, + int disable_rx_ic); + /* TX descriptor ring initialization */ + void (*init_tx_desc) (struct dma_desc *p, unsigned int ring_size); + + /* Invoked by the xmit function to prepare the tx descriptor */ + void (*prepare_tx_desc) (struct dma_desc *p, int is_fs, int len, + int csum_flag); + /* Set/get the owner of the descriptor */ + void (*set_tx_owner) (struct dma_desc *p); + int (*get_tx_owner) (struct dma_desc *p); + /* Invoked by the xmit function to close the tx descriptor */ + void (*close_tx_desc) (struct dma_desc *p); + /* Clean the tx descriptor as soon as the tx irq is received */ + void (*release_tx_desc) (struct dma_desc *p); + /* Clear interrupt on tx frame completion. When this bit is + * set an interrupt happens as soon as the frame is transmitted */ + void (*clear_tx_ic) (struct dma_desc *p); + /* Last tx segment reports the transmit status */ + int (*get_tx_ls) (struct dma_desc *p); + /* Return the transmit status looking at the TDES1 */ + int (*tx_status) (void *data, struct stmmac_extra_stats *x, + struct dma_desc *p, unsigned long ioaddr); + /* Get the buffer size from the descriptor */ + int (*get_tx_len) (struct dma_desc *p); + /* Handle extra events on specific interrupts hw dependent */ + void (*host_irq_status) (unsigned long ioaddr); + int (*get_rx_owner) (struct dma_desc *p); + void (*set_rx_owner) (struct dma_desc *p); + /* Get the receive frame size */ + int (*get_rx_frame_len) (struct dma_desc *p); + /* Return the reception status looking at the RDES1 */ + int (*rx_status) (void *data, struct stmmac_extra_stats *x, + struct dma_desc *p); + /* Multicast filter setting */ + void (*set_filter) (struct net_device *dev); + /* Flow control setting */ + void (*flow_ctrl) (unsigned long ioaddr, unsigned int duplex, + unsigned int fc, unsigned int pause_time); + /* Set power management mode (e.g. magic frame) */ + void (*pmt) (unsigned long ioaddr, unsigned long mode); + /* Set/Get Unicast MAC addresses */ + void (*set_umac_addr) (unsigned long ioaddr, unsigned char *addr, + unsigned int reg_n); + void (*get_umac_addr) (unsigned long ioaddr, unsigned char *addr, + unsigned int reg_n); +}; + +struct mac_link { + int port; + int duplex; + int speed; +}; + +struct mii_regs { + unsigned int addr; /* MII Address */ + unsigned int data; /* MII Data */ +}; + +struct hw_cap { + unsigned int version; /* Core Version register (GMAC) */ + unsigned int pmt; /* Power-Down mode (GMAC) */ + struct mac_link link; + struct mii_regs mii; +}; + +struct mac_device_info { + struct hw_cap hw; + struct stmmac_ops *ops; +}; + +struct mac_device_info *gmac_setup(unsigned long addr); +struct mac_device_info *mac100_setup(unsigned long addr); diff --git a/drivers/net/stmmac/descs.h b/drivers/net/stmmac/descs.h new file mode 100644 index 000000000000..6d2a0b2f5e57 --- /dev/null +++ b/drivers/net/stmmac/descs.h @@ -0,0 +1,163 @@ +/******************************************************************************* + Header File to describe the DMA descriptors + Use enhanced descriptors in case of GMAC Cores. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> +*******************************************************************************/ +struct dma_desc { + /* Receive descriptor */ + union { + struct { + /* RDES0 */ + u32 reserved1:1; + u32 crc_error:1; + u32 dribbling:1; + u32 mii_error:1; + u32 receive_watchdog:1; + u32 frame_type:1; + u32 collision:1; + u32 frame_too_long:1; + u32 last_descriptor:1; + u32 first_descriptor:1; + u32 multicast_frame:1; + u32 run_frame:1; + u32 length_error:1; + u32 partial_frame_error:1; + u32 descriptor_error:1; + u32 error_summary:1; + u32 frame_length:14; + u32 filtering_fail:1; + u32 own:1; + /* RDES1 */ + u32 buffer1_size:11; + u32 buffer2_size:11; + u32 reserved2:2; + u32 second_address_chained:1; + u32 end_ring:1; + u32 reserved3:5; + u32 disable_ic:1; + } rx; + struct { + /* RDES0 */ + u32 payload_csum_error:1; + u32 crc_error:1; + u32 dribbling:1; + u32 error_gmii:1; + u32 receive_watchdog:1; + u32 frame_type:1; + u32 late_collision:1; + u32 ipc_csum_error:1; + u32 last_descriptor:1; + u32 first_descriptor:1; + u32 vlan_tag:1; + u32 overflow_error:1; + u32 length_error:1; + u32 sa_filter_fail:1; + u32 descriptor_error:1; + u32 error_summary:1; + u32 frame_length:14; + u32 da_filter_fail:1; + u32 own:1; + /* RDES1 */ + u32 buffer1_size:13; + u32 reserved1:1; + u32 second_address_chained:1; + u32 end_ring:1; + u32 buffer2_size:13; + u32 reserved2:2; + u32 disable_ic:1; + } erx; /* -- enhanced -- */ + + /* Transmit descriptor */ + struct { + /* TDES0 */ + u32 deferred:1; + u32 underflow_error:1; + u32 excessive_deferral:1; + u32 collision_count:4; + u32 heartbeat_fail:1; + u32 excessive_collisions:1; + u32 late_collision:1; + u32 no_carrier:1; + u32 loss_carrier:1; + u32 reserved1:3; + u32 error_summary:1; + u32 reserved2:15; + u32 own:1; + /* TDES1 */ + u32 buffer1_size:11; + u32 buffer2_size:11; + u32 reserved3:1; + u32 disable_padding:1; + u32 second_address_chained:1; + u32 end_ring:1; + u32 crc_disable:1; + u32 reserved4:2; + u32 first_segment:1; + u32 last_segment:1; + u32 interrupt:1; + } tx; + struct { + /* TDES0 */ + u32 deferred:1; + u32 underflow_error:1; + u32 excessive_deferral:1; + u32 collision_count:4; + u32 vlan_frame:1; + u32 excessive_collisions:1; + u32 late_collision:1; + u32 no_carrier:1; + u32 loss_carrier:1; + u32 payload_error:1; + u32 frame_flushed:1; + u32 jabber_timeout:1; + u32 error_summary:1; + u32 ip_header_error:1; + u32 time_stamp_status:1; + u32 reserved1:2; + u32 second_address_chained:1; + u32 end_ring:1; + u32 checksum_insertion:2; + u32 reserved2:1; + u32 time_stamp_enable:1; + u32 disable_padding:1; + u32 crc_disable:1; + u32 first_segment:1; + u32 last_segment:1; + u32 interrupt:1; + u32 own:1; + /* TDES1 */ + u32 buffer1_size:13; + u32 reserved3:3; + u32 buffer2_size:13; + u32 reserved4:3; + } etx; /* -- enhanced -- */ + } des01; + unsigned int des2; + unsigned int des3; +}; + +/* Transmit checksum insertion control */ +enum tdes_csum_insertion { + cic_disabled = 0, /* Checksum Insertion Control */ + cic_only_ip = 1, /* Only IP header */ + cic_no_pseudoheader = 2, /* IP header but pseudoheader + * is not calculated */ + cic_full = 3, /* IP header and pseudoheader */ +}; diff --git a/drivers/net/stmmac/gmac.c b/drivers/net/stmmac/gmac.c new file mode 100644 index 000000000000..b624bb5bae0a --- /dev/null +++ b/drivers/net/stmmac/gmac.c @@ -0,0 +1,693 @@ +/******************************************************************************* + This is the driver for the GMAC on-chip Ethernet controller for ST SoCs. + DWC Ether MAC 10/100/1000 Universal version 3.41a has been used for + developing this code. + + Copyright (C) 2007-2009 STMicroelectronics Ltd + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> +*******************************************************************************/ + +#include <linux/netdevice.h> +#include <linux/crc32.h> +#include <linux/mii.h> +#include <linux/phy.h> + +#include "stmmac.h" +#include "gmac.h" + +#undef GMAC_DEBUG +/*#define GMAC_DEBUG*/ +#undef FRAME_FILTER_DEBUG +/*#define FRAME_FILTER_DEBUG*/ +#ifdef GMAC_DEBUG +#define DBG(fmt, args...) printk(fmt, ## args) +#else +#define DBG(fmt, args...) do { } while (0) +#endif + +static void gmac_dump_regs(unsigned long ioaddr) +{ + int i; + pr_info("\t----------------------------------------------\n" + "\t GMAC registers (base addr = 0x%8x)\n" + "\t----------------------------------------------\n", + (unsigned int)ioaddr); + + for (i = 0; i < 55; i++) { + int offset = i * 4; + pr_info("\tReg No. %d (offset 0x%x): 0x%08x\n", i, + offset, readl(ioaddr + offset)); + } + return; +} + +static int gmac_dma_init(unsigned long ioaddr, int pbl, u32 dma_tx, u32 dma_rx) +{ + u32 value = readl(ioaddr + DMA_BUS_MODE); + /* DMA SW reset */ + value |= DMA_BUS_MODE_SFT_RESET; + writel(value, ioaddr + DMA_BUS_MODE); + do {} while ((readl(ioaddr + DMA_BUS_MODE) & DMA_BUS_MODE_SFT_RESET)); + + value = /* DMA_BUS_MODE_FB | */ DMA_BUS_MODE_4PBL | + ((pbl << DMA_BUS_MODE_PBL_SHIFT) | + (pbl << DMA_BUS_MODE_RPBL_SHIFT)); + +#ifdef CONFIG_STMMAC_DA + value |= DMA_BUS_MODE_DA; /* Rx has priority over tx */ +#endif + writel(value, ioaddr + DMA_BUS_MODE); + + /* Mask interrupts by writing to CSR7 */ + writel(DMA_INTR_DEFAULT_MASK, ioaddr + DMA_INTR_ENA); + + /* The base address of the RX/TX descriptor lists must be written into + * DMA CSR3 and CSR4, respectively. */ + writel(dma_tx, ioaddr + DMA_TX_BASE_ADDR); + writel(dma_rx, ioaddr + DMA_RCV_BASE_ADDR); + + return 0; +} + +/* Transmit FIFO flush operation */ +static void gmac_flush_tx_fifo(unsigned long ioaddr) +{ + u32 csr6 = readl(ioaddr + DMA_CONTROL); + writel((csr6 | DMA_CONTROL_FTF), ioaddr + DMA_CONTROL); + + do {} while ((readl(ioaddr + DMA_CONTROL) & DMA_CONTROL_FTF)); +} + +static void gmac_dma_operation_mode(unsigned long ioaddr, int txmode, + int rxmode) +{ + u32 csr6 = readl(ioaddr + DMA_CONTROL); + + if (txmode == SF_DMA_MODE) { + DBG(KERN_DEBUG "GMAC: enabling TX store and forward mode\n"); + /* Transmit COE type 2 cannot be done in cut-through mode. */ + csr6 |= DMA_CONTROL_TSF; + /* Operating on second frame increase the performance + * especially when transmit store-and-forward is used.*/ + csr6 |= DMA_CONTROL_OSF; + } else { + DBG(KERN_DEBUG "GMAC: disabling TX store and forward mode" + " (threshold = %d)\n", txmode); + csr6 &= ~DMA_CONTROL_TSF; + csr6 &= DMA_CONTROL_TC_TX_MASK; + /* Set the transmit threashold */ + if (txmode <= 32) + csr6 |= DMA_CONTROL_TTC_32; + else if (txmode <= 64) + csr6 |= DMA_CONTROL_TTC_64; + else if (txmode <= 128) + csr6 |= DMA_CONTROL_TTC_128; + else if (txmode <= 192) + csr6 |= DMA_CONTROL_TTC_192; + else + csr6 |= DMA_CONTROL_TTC_256; + } + + if (rxmode == SF_DMA_MODE) { + DBG(KERN_DEBUG "GMAC: enabling RX store and forward mode\n"); + csr6 |= DMA_CONTROL_RSF; + } else { + DBG(KERN_DEBUG "GMAC: disabling RX store and forward mode" + " (threshold = %d)\n", rxmode); + csr6 &= ~DMA_CONTROL_RSF; + csr6 &= DMA_CONTROL_TC_RX_MASK; + if (rxmode <= 32) + csr6 |= DMA_CONTROL_RTC_32; + else if (rxmode <= 64) + csr6 |= DMA_CONTROL_RTC_64; + else if (rxmode <= 96) + csr6 |= DMA_CONTROL_RTC_96; + else + csr6 |= DMA_CONTROL_RTC_128; + } + + writel(csr6, ioaddr + DMA_CONTROL); + return; +} + +/* Not yet implemented --- no RMON module */ +static void gmac_dma_diagnostic_fr(void *data, struct stmmac_extra_stats *x, + unsigned long ioaddr) +{ + return; +} + +static void gmac_dump_dma_regs(unsigned long ioaddr) +{ + int i; + pr_info(" DMA registers\n"); + for (i = 0; i < 22; i++) { + if ((i < 9) || (i > 17)) { + int offset = i * 4; + pr_err("\t Reg No. %d (offset 0x%x): 0x%08x\n", i, + (DMA_BUS_MODE + offset), + readl(ioaddr + DMA_BUS_MODE + offset)); + } + } + return; +} + +static int gmac_get_tx_frame_status(void *data, struct stmmac_extra_stats *x, + struct dma_desc *p, unsigned long ioaddr) +{ + int ret = 0; + struct net_device_stats *stats = (struct net_device_stats *)data; + + if (unlikely(p->des01.etx.error_summary)) { + DBG(KERN_ERR "GMAC TX error... 0x%08x\n", p->des01.etx); + if (unlikely(p->des01.etx.jabber_timeout)) { + DBG(KERN_ERR "\tjabber_timeout error\n"); + x->tx_jabber++; + } + + if (unlikely(p->des01.etx.frame_flushed)) { + DBG(KERN_ERR "\tframe_flushed error\n"); + x->tx_frame_flushed++; + gmac_flush_tx_fifo(ioaddr); + } + + if (unlikely(p->des01.etx.loss_carrier)) { + DBG(KERN_ERR "\tloss_carrier error\n"); + x->tx_losscarrier++; + stats->tx_carrier_errors++; + } + if (unlikely(p->des01.etx.no_carrier)) { + DBG(KERN_ERR "\tno_carrier error\n"); + x->tx_carrier++; + stats->tx_carrier_errors++; + } + if (unlikely(p->des01.etx.late_collision)) { + DBG(KERN_ERR "\tlate_collision error\n"); + stats->collisions += p->des01.etx.collision_count; + } + if (unlikely(p->des01.etx.excessive_collisions)) { + DBG(KERN_ERR "\texcessive_collisions\n"); + stats->collisions += p->des01.etx.collision_count; + } + if (unlikely(p->des01.etx.excessive_deferral)) { + DBG(KERN_INFO "\texcessive tx_deferral\n"); + x->tx_deferred++; + } + + if (unlikely(p->des01.etx.underflow_error)) { + DBG(KERN_ERR "\tunderflow error\n"); + gmac_flush_tx_fifo(ioaddr); + x->tx_underflow++; + } + + if (unlikely(p->des01.etx.ip_header_error)) { + DBG(KERN_ERR "\tTX IP header csum error\n"); + x->tx_ip_header_error++; + } + + if (unlikely(p->des01.etx.payload_error)) { + DBG(KERN_ERR "\tAddr/Payload csum error\n"); + x->tx_payload_error++; + gmac_flush_tx_fifo(ioaddr); + } + + ret = -1; + } + + if (unlikely(p->des01.etx.deferred)) { + DBG(KERN_INFO "GMAC TX status: tx deferred\n"); + x->tx_deferred++; + } +#ifdef STMMAC_VLAN_TAG_USED + if (p->des01.etx.vlan_frame) { + DBG(KERN_INFO "GMAC TX status: VLAN frame\n"); + x->tx_vlan++; + } +#endif + + return ret; +} + +static int gmac_get_tx_len(struct dma_desc *p) +{ + return p->des01.etx.buffer1_size; +} + +static int gmac_coe_rdes0(int ipc_err, int type, int payload_err) +{ + int ret = good_frame; + u32 status = (type << 2 | ipc_err << 1 | payload_err) & 0x7; + + /* bits 5 7 0 | Frame status + * ---------------------------------------------------------- + * 0 0 0 | IEEE 802.3 Type frame (lenght < 1536 octects) + * 1 0 0 | IPv4/6 No CSUM errorS. + * 1 0 1 | IPv4/6 CSUM PAYLOAD error + * 1 1 0 | IPv4/6 CSUM IP HR error + * 1 1 1 | IPv4/6 IP PAYLOAD AND HEADER errorS + * 0 0 1 | IPv4/6 unsupported IP PAYLOAD + * 0 1 1 | COE bypassed.. no IPv4/6 frame + * 0 1 0 | Reserved. + */ + if (status == 0x0) { + DBG(KERN_INFO "RX Des0 status: IEEE 802.3 Type frame.\n"); + ret = good_frame; + } else if (status == 0x4) { + DBG(KERN_INFO "RX Des0 status: IPv4/6 No CSUM errorS.\n"); + ret = good_frame; + } else if (status == 0x5) { + DBG(KERN_ERR "RX Des0 status: IPv4/6 Payload Error.\n"); + ret = csum_none; + } else if (status == 0x6) { + DBG(KERN_ERR "RX Des0 status: IPv4/6 Header Error.\n"); + ret = csum_none; + } else if (status == 0x7) { + DBG(KERN_ERR + "RX Des0 status: IPv4/6 Header and Payload Error.\n"); + ret = csum_none; + } else if (status == 0x1) { + DBG(KERN_ERR + "RX Des0 status: IPv4/6 unsupported IP PAYLOAD.\n"); + ret = discard_frame; + } else if (status == 0x3) { + DBG(KERN_ERR "RX Des0 status: No IPv4, IPv6 frame.\n"); + ret = discard_frame; + } + return ret; +} + +static int gmac_get_rx_frame_status(void *data, struct stmmac_extra_stats *x, + struct dma_desc *p) +{ + int ret = good_frame; + struct net_device_stats *stats = (struct net_device_stats *)data; + + if (unlikely(p->des01.erx.error_summary)) { + DBG(KERN_ERR "GMAC RX Error Summary... 0x%08x\n", p->des01.erx); + if (unlikely(p->des01.erx.descriptor_error)) { + DBG(KERN_ERR "\tdescriptor error\n"); + x->rx_desc++; + stats->rx_length_errors++; + } + if (unlikely(p->des01.erx.overflow_error)) { + DBG(KERN_ERR "\toverflow error\n"); + x->rx_gmac_overflow++; + } + + if (unlikely(p->des01.erx.ipc_csum_error)) + DBG(KERN_ERR "\tIPC Csum Error/Giant frame\n"); + + if (unlikely(p->des01.erx.late_collision)) { + DBG(KERN_ERR "\tlate_collision error\n"); + stats->collisions++; + stats->collisions++; + } + if (unlikely(p->des01.erx.receive_watchdog)) { + DBG(KERN_ERR "\treceive_watchdog error\n"); + x->rx_watchdog++; + } + if (unlikely(p->des01.erx.error_gmii)) { + DBG(KERN_ERR "\tReceive Error\n"); + x->rx_mii++; + } + if (unlikely(p->des01.erx.crc_error)) { + DBG(KERN_ERR "\tCRC error\n"); + x->rx_crc++; + stats->rx_crc_errors++; + } + ret = discard_frame; + } + + /* After a payload csum error, the ES bit is set. + * It doesn't match with the information reported into the databook. + * At any rate, we need to understand if the CSUM hw computation is ok + * and report this info to the upper layers. */ + ret = gmac_coe_rdes0(p->des01.erx.ipc_csum_error, + p->des01.erx.frame_type, p->des01.erx.payload_csum_error); + + if (unlikely(p->des01.erx.dribbling)) { + DBG(KERN_ERR "GMAC RX: dribbling error\n"); + ret = discard_frame; + } + if (unlikely(p->des01.erx.sa_filter_fail)) { + DBG(KERN_ERR "GMAC RX : Source Address filter fail\n"); + x->sa_rx_filter_fail++; + ret = discard_frame; + } + if (unlikely(p->des01.erx.da_filter_fail)) { + DBG(KERN_ERR "GMAC RX : Destination Address filter fail\n"); + x->da_rx_filter_fail++; + ret = discard_frame; + } + if (unlikely(p->des01.erx.length_error)) { + DBG(KERN_ERR "GMAC RX: length_error error\n"); + x->rx_lenght++; + ret = discard_frame; + } +#ifdef STMMAC_VLAN_TAG_USED + if (p->des01.erx.vlan_tag) { + DBG(KERN_INFO "GMAC RX: VLAN frame tagged\n"); + x->rx_vlan++; + } +#endif + return ret; +} + +static void gmac_irq_status(unsigned long ioaddr) +{ + u32 intr_status = readl(ioaddr + GMAC_INT_STATUS); + + /* Not used events (e.g. MMC interrupts) are not handled. */ + if ((intr_status & mmc_tx_irq)) + DBG(KERN_DEBUG "GMAC: MMC tx interrupt: 0x%08x\n", + readl(ioaddr + GMAC_MMC_TX_INTR)); + if (unlikely(intr_status & mmc_rx_irq)) + DBG(KERN_DEBUG "GMAC: MMC rx interrupt: 0x%08x\n", + readl(ioaddr + GMAC_MMC_RX_INTR)); + if (unlikely(intr_status & mmc_rx_csum_offload_irq)) + DBG(KERN_DEBUG "GMAC: MMC rx csum offload: 0x%08x\n", + readl(ioaddr + GMAC_MMC_RX_CSUM_OFFLOAD)); + if (unlikely(intr_status & pmt_irq)) { + DBG(KERN_DEBUG "GMAC: received Magic frame\n"); + /* clear the PMT bits 5 and 6 by reading the PMT + * status register. */ + readl(ioaddr + GMAC_PMT); + } + + return; +} + +static void gmac_core_init(unsigned long ioaddr) +{ + u32 value = readl(ioaddr + GMAC_CONTROL); + value |= GMAC_CORE_INIT; + writel(value, ioaddr + GMAC_CONTROL); + + /* STBus Bridge Configuration */ + /*writel(0xc5608, ioaddr + 0x00007000);*/ + + /* Freeze MMC counters */ + writel(0x8, ioaddr + GMAC_MMC_CTRL); + /* Mask GMAC interrupts */ + writel(0x207, ioaddr + GMAC_INT_MASK); + +#ifdef STMMAC_VLAN_TAG_USED + /* Tag detection without filtering */ + writel(0x0, ioaddr + GMAC_VLAN_TAG); +#endif + return; +} + +static void gmac_set_umac_addr(unsigned long ioaddr, unsigned char *addr, + unsigned int reg_n) +{ + stmmac_set_mac_addr(ioaddr, addr, GMAC_ADDR_HIGH(reg_n), + GMAC_ADDR_LOW(reg_n)); +} + +static void gmac_get_umac_addr(unsigned long ioaddr, unsigned char *addr, + unsigned int reg_n) +{ + stmmac_get_mac_addr(ioaddr, addr, GMAC_ADDR_HIGH(reg_n), + GMAC_ADDR_LOW(reg_n)); +} + +static void gmac_set_filter(struct net_device *dev) +{ + unsigned long ioaddr = dev->base_addr; + unsigned int value = 0; + + DBG(KERN_INFO "%s: # mcasts %d, # unicast %d\n", + __func__, dev->mc_count, dev->uc_count); + + if (dev->flags & IFF_PROMISC) + value = GMAC_FRAME_FILTER_PR; + else if ((dev->mc_count > HASH_TABLE_SIZE) + || (dev->flags & IFF_ALLMULTI)) { + value = GMAC_FRAME_FILTER_PM; /* pass all multi */ + writel(0xffffffff, ioaddr + GMAC_HASH_HIGH); + writel(0xffffffff, ioaddr + GMAC_HASH_LOW); + } else if (dev->mc_count > 0) { + int i; + u32 mc_filter[2]; + struct dev_mc_list *mclist; + + /* Hash filter for multicast */ + value = GMAC_FRAME_FILTER_HMC; + + memset(mc_filter, 0, sizeof(mc_filter)); + for (i = 0, mclist = dev->mc_list; + mclist && i < dev->mc_count; i++, mclist = mclist->next) { + /* The upper 6 bits of the calculated CRC are used to + index the contens of the hash table */ + int bit_nr = + bitrev32(~crc32_le(~0, mclist->dmi_addr, 6)) >> 26; + /* The most significant bit determines the register to + * use (H/L) while the other 5 bits determine the bit + * within the register. */ + mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31); + } + writel(mc_filter[0], ioaddr + GMAC_HASH_LOW); + writel(mc_filter[1], ioaddr + GMAC_HASH_HIGH); + } + + /* Handle multiple unicast addresses (perfect filtering)*/ + if (dev->uc_count > GMAC_MAX_UNICAST_ADDRESSES) + /* Switch to promiscuous mode is more than 16 addrs + are required */ + value |= GMAC_FRAME_FILTER_PR; + else { + int i; + struct dev_addr_list *uc_ptr = dev->uc_list; + + for (i = 0; i < dev->uc_count; i++) { + gmac_set_umac_addr(ioaddr, uc_ptr->da_addr, + i + 1); + + DBG(KERN_INFO "\t%d " + "- Unicast addr %02x:%02x:%02x:%02x:%02x:" + "%02x\n", i + 1, + uc_ptr->da_addr[0], uc_ptr->da_addr[1], + uc_ptr->da_addr[2], uc_ptr->da_addr[3], + uc_ptr->da_addr[4], uc_ptr->da_addr[5]); + uc_ptr = uc_ptr->next; + } + } + +#ifdef FRAME_FILTER_DEBUG + /* Enable Receive all mode (to debug filtering_fail errors) */ + value |= GMAC_FRAME_FILTER_RA; +#endif + writel(value, ioaddr + GMAC_FRAME_FILTER); + + DBG(KERN_INFO "\tFrame Filter reg: 0x%08x\n\tHash regs: " + "HI 0x%08x, LO 0x%08x\n", readl(ioaddr + GMAC_FRAME_FILTER), + readl(ioaddr + GMAC_HASH_HIGH), readl(ioaddr + GMAC_HASH_LOW)); + + return; +} + +static void gmac_flow_ctrl(unsigned long ioaddr, unsigned int duplex, + unsigned int fc, unsigned int pause_time) +{ + unsigned int flow = 0; + + DBG(KERN_DEBUG "GMAC Flow-Control:\n"); + if (fc & FLOW_RX) { + DBG(KERN_DEBUG "\tReceive Flow-Control ON\n"); + flow |= GMAC_FLOW_CTRL_RFE; + } + if (fc & FLOW_TX) { + DBG(KERN_DEBUG "\tTransmit Flow-Control ON\n"); + flow |= GMAC_FLOW_CTRL_TFE; + } + + if (duplex) { + DBG(KERN_DEBUG "\tduplex mode: pause time: %d\n", pause_time); + flow |= (pause_time << GMAC_FLOW_CTRL_PT_SHIFT); + } + + writel(flow, ioaddr + GMAC_FLOW_CTRL); + return; +} + +static void gmac_pmt(unsigned long ioaddr, unsigned long mode) +{ + unsigned int pmt = 0; + + if (mode == WAKE_MAGIC) { + DBG(KERN_DEBUG "GMAC: WOL Magic frame\n"); + pmt |= power_down | magic_pkt_en; + } else if (mode == WAKE_UCAST) { + DBG(KERN_DEBUG "GMAC: WOL on global unicast\n"); + pmt |= global_unicast; + } + + writel(pmt, ioaddr + GMAC_PMT); + return; +} + +static void gmac_init_rx_desc(struct dma_desc *p, unsigned int ring_size, + int disable_rx_ic) +{ + int i; + for (i = 0; i < ring_size; i++) { + p->des01.erx.own = 1; + p->des01.erx.buffer1_size = BUF_SIZE_8KiB - 1; + /* To support jumbo frames */ + p->des01.erx.buffer2_size = BUF_SIZE_8KiB - 1; + if (i == ring_size - 1) + p->des01.erx.end_ring = 1; + if (disable_rx_ic) + p->des01.erx.disable_ic = 1; + p++; + } + return; +} + +static void gmac_init_tx_desc(struct dma_desc *p, unsigned int ring_size) +{ + int i; + + for (i = 0; i < ring_size; i++) { + p->des01.etx.own = 0; + if (i == ring_size - 1) + p->des01.etx.end_ring = 1; + p++; + } + + return; +} + +static int gmac_get_tx_owner(struct dma_desc *p) +{ + return p->des01.etx.own; +} + +static int gmac_get_rx_owner(struct dma_desc *p) +{ + return p->des01.erx.own; +} + +static void gmac_set_tx_owner(struct dma_desc *p) +{ + p->des01.etx.own = 1; +} + +static void gmac_set_rx_owner(struct dma_desc *p) +{ + p->des01.erx.own = 1; +} + +static int gmac_get_tx_ls(struct dma_desc *p) +{ + return p->des01.etx.last_segment; +} + +static void gmac_release_tx_desc(struct dma_desc *p) +{ + int ter = p->des01.etx.end_ring; + + memset(p, 0, sizeof(struct dma_desc)); + p->des01.etx.end_ring = ter; + + return; +} + +static void gmac_prepare_tx_desc(struct dma_desc *p, int is_fs, int len, + int csum_flag) +{ + p->des01.etx.first_segment = is_fs; + if (unlikely(len > BUF_SIZE_4KiB)) { + p->des01.etx.buffer1_size = BUF_SIZE_4KiB; + p->des01.etx.buffer2_size = len - BUF_SIZE_4KiB; + } else { + p->des01.etx.buffer1_size = len; + } + if (likely(csum_flag)) + p->des01.etx.checksum_insertion = cic_full; +} + +static void gmac_clear_tx_ic(struct dma_desc *p) +{ + p->des01.etx.interrupt = 0; +} + +static void gmac_close_tx_desc(struct dma_desc *p) +{ + p->des01.etx.last_segment = 1; + p->des01.etx.interrupt = 1; +} + +static int gmac_get_rx_frame_len(struct dma_desc *p) +{ + return p->des01.erx.frame_length; +} + +struct stmmac_ops gmac_driver = { + .core_init = gmac_core_init, + .dump_mac_regs = gmac_dump_regs, + .dma_init = gmac_dma_init, + .dump_dma_regs = gmac_dump_dma_regs, + .dma_mode = gmac_dma_operation_mode, + .dma_diagnostic_fr = gmac_dma_diagnostic_fr, + .tx_status = gmac_get_tx_frame_status, + .rx_status = gmac_get_rx_frame_status, + .get_tx_len = gmac_get_tx_len, + .set_filter = gmac_set_filter, + .flow_ctrl = gmac_flow_ctrl, + .pmt = gmac_pmt, + .init_rx_desc = gmac_init_rx_desc, + .init_tx_desc = gmac_init_tx_desc, + .get_tx_owner = gmac_get_tx_owner, + .get_rx_owner = gmac_get_rx_owner, + .release_tx_desc = gmac_release_tx_desc, + .prepare_tx_desc = gmac_prepare_tx_desc, + .clear_tx_ic = gmac_clear_tx_ic, + .close_tx_desc = gmac_close_tx_desc, + .get_tx_ls = gmac_get_tx_ls, + .set_tx_owner = gmac_set_tx_owner, + .set_rx_owner = gmac_set_rx_owner, + .get_rx_frame_len = gmac_get_rx_frame_len, + .host_irq_status = gmac_irq_status, + .set_umac_addr = gmac_set_umac_addr, + .get_umac_addr = gmac_get_umac_addr, +}; + +struct mac_device_info *gmac_setup(unsigned long ioaddr) +{ + struct mac_device_info *mac; + u32 uid = readl(ioaddr + GMAC_VERSION); + + pr_info("\tGMAC - user ID: 0x%x, Synopsys ID: 0x%x\n", + ((uid & 0x0000ff00) >> 8), (uid & 0x000000ff)); + + mac = kzalloc(sizeof(const struct mac_device_info), GFP_KERNEL); + + mac->ops = &gmac_driver; + mac->hw.pmt = PMT_SUPPORTED; + mac->hw.link.port = GMAC_CONTROL_PS; + mac->hw.link.duplex = GMAC_CONTROL_DM; + mac->hw.link.speed = GMAC_CONTROL_FES; + mac->hw.mii.addr = GMAC_MII_ADDR; + mac->hw.mii.data = GMAC_MII_DATA; + + return mac; +} diff --git a/drivers/net/stmmac/gmac.h b/drivers/net/stmmac/gmac.h new file mode 100644 index 000000000000..684a363120a9 --- /dev/null +++ b/drivers/net/stmmac/gmac.h @@ -0,0 +1,204 @@ +/******************************************************************************* + Copyright (C) 2007-2009 STMicroelectronics Ltd + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> +*******************************************************************************/ + +#define GMAC_CONTROL 0x00000000 /* Configuration */ +#define GMAC_FRAME_FILTER 0x00000004 /* Frame Filter */ +#define GMAC_HASH_HIGH 0x00000008 /* Multicast Hash Table High */ +#define GMAC_HASH_LOW 0x0000000c /* Multicast Hash Table Low */ +#define GMAC_MII_ADDR 0x00000010 /* MII Address */ +#define GMAC_MII_DATA 0x00000014 /* MII Data */ +#define GMAC_FLOW_CTRL 0x00000018 /* Flow Control */ +#define GMAC_VLAN_TAG 0x0000001c /* VLAN Tag */ +#define GMAC_VERSION 0x00000020 /* GMAC CORE Version */ +#define GMAC_WAKEUP_FILTER 0x00000028 /* Wake-up Frame Filter */ + +#define GMAC_INT_STATUS 0x00000038 /* interrupt status register */ +enum gmac_irq_status { + time_stamp_irq = 0x0200, + mmc_rx_csum_offload_irq = 0x0080, + mmc_tx_irq = 0x0040, + mmc_rx_irq = 0x0020, + mmc_irq = 0x0010, + pmt_irq = 0x0008, + pcs_ane_irq = 0x0004, + pcs_link_irq = 0x0002, + rgmii_irq = 0x0001, +}; +#define GMAC_INT_MASK 0x0000003c /* interrupt mask register */ + +/* PMT Control and Status */ +#define GMAC_PMT 0x0000002c +enum power_event { + pointer_reset = 0x80000000, + global_unicast = 0x00000200, + wake_up_rx_frame = 0x00000040, + magic_frame = 0x00000020, + wake_up_frame_en = 0x00000004, + magic_pkt_en = 0x00000002, + power_down = 0x00000001, +}; + +/* GMAC HW ADDR regs */ +#define GMAC_ADDR_HIGH(reg) (0x00000040+(reg * 8)) +#define GMAC_ADDR_LOW(reg) (0x00000044+(reg * 8)) +#define GMAC_MAX_UNICAST_ADDRESSES 16 + +#define GMAC_AN_CTRL 0x000000c0 /* AN control */ +#define GMAC_AN_STATUS 0x000000c4 /* AN status */ +#define GMAC_ANE_ADV 0x000000c8 /* Auto-Neg. Advertisement */ +#define GMAC_ANE_LINK 0x000000cc /* Auto-Neg. link partener ability */ +#define GMAC_ANE_EXP 0x000000d0 /* ANE expansion */ +#define GMAC_TBI 0x000000d4 /* TBI extend status */ +#define GMAC_GMII_STATUS 0x000000d8 /* S/R-GMII status */ + +/* GMAC Configuration defines */ +#define GMAC_CONTROL_TC 0x01000000 /* Transmit Conf. in RGMII/SGMII */ +#define GMAC_CONTROL_WD 0x00800000 /* Disable Watchdog on receive */ +#define GMAC_CONTROL_JD 0x00400000 /* Jabber disable */ +#define GMAC_CONTROL_BE 0x00200000 /* Frame Burst Enable */ +#define GMAC_CONTROL_JE 0x00100000 /* Jumbo frame */ +enum inter_frame_gap { + GMAC_CONTROL_IFG_88 = 0x00040000, + GMAC_CONTROL_IFG_80 = 0x00020000, + GMAC_CONTROL_IFG_40 = 0x000e0000, +}; +#define GMAC_CONTROL_DCRS 0x00010000 /* Disable carrier sense during tx */ +#define GMAC_CONTROL_PS 0x00008000 /* Port Select 0:GMI 1:MII */ +#define GMAC_CONTROL_FES 0x00004000 /* Speed 0:10 1:100 */ +#define GMAC_CONTROL_DO 0x00002000 /* Disable Rx Own */ +#define GMAC_CONTROL_LM 0x00001000 /* Loop-back mode */ +#define GMAC_CONTROL_DM 0x00000800 /* Duplex Mode */ +#define GMAC_CONTROL_IPC 0x00000400 /* Checksum Offload */ +#define GMAC_CONTROL_DR 0x00000200 /* Disable Retry */ +#define GMAC_CONTROL_LUD 0x00000100 /* Link up/down */ +#define GMAC_CONTROL_ACS 0x00000080 /* Automatic Pad Stripping */ +#define GMAC_CONTROL_DC 0x00000010 /* Deferral Check */ +#define GMAC_CONTROL_TE 0x00000008 /* Transmitter Enable */ +#define GMAC_CONTROL_RE 0x00000004 /* Receiver Enable */ + +#define GMAC_CORE_INIT (GMAC_CONTROL_JD | GMAC_CONTROL_PS | GMAC_CONTROL_ACS | \ + GMAC_CONTROL_IPC | GMAC_CONTROL_JE | GMAC_CONTROL_BE) + +/* GMAC Frame Filter defines */ +#define GMAC_FRAME_FILTER_PR 0x00000001 /* Promiscuous Mode */ +#define GMAC_FRAME_FILTER_HUC 0x00000002 /* Hash Unicast */ +#define GMAC_FRAME_FILTER_HMC 0x00000004 /* Hash Multicast */ +#define GMAC_FRAME_FILTER_DAIF 0x00000008 /* DA Inverse Filtering */ +#define GMAC_FRAME_FILTER_PM 0x00000010 /* Pass all multicast */ +#define GMAC_FRAME_FILTER_DBF 0x00000020 /* Disable Broadcast frames */ +#define GMAC_FRAME_FILTER_SAIF 0x00000100 /* Inverse Filtering */ +#define GMAC_FRAME_FILTER_SAF 0x00000200 /* Source Address Filter */ +#define GMAC_FRAME_FILTER_HPF 0x00000400 /* Hash or perfect Filter */ +#define GMAC_FRAME_FILTER_RA 0x80000000 /* Receive all mode */ +/* GMII ADDR defines */ +#define GMAC_MII_ADDR_WRITE 0x00000002 /* MII Write */ +#define GMAC_MII_ADDR_BUSY 0x00000001 /* MII Busy */ +/* GMAC FLOW CTRL defines */ +#define GMAC_FLOW_CTRL_PT_MASK 0xffff0000 /* Pause Time Mask */ +#define GMAC_FLOW_CTRL_PT_SHIFT 16 +#define GMAC_FLOW_CTRL_RFE 0x00000004 /* Rx Flow Control Enable */ +#define GMAC_FLOW_CTRL_TFE 0x00000002 /* Tx Flow Control Enable */ +#define GMAC_FLOW_CTRL_FCB_BPA 0x00000001 /* Flow Control Busy ... */ + +/*--- DMA BLOCK defines ---*/ +/* DMA Bus Mode register defines */ +#define DMA_BUS_MODE_SFT_RESET 0x00000001 /* Software Reset */ +#define DMA_BUS_MODE_DA 0x00000002 /* Arbitration scheme */ +#define DMA_BUS_MODE_DSL_MASK 0x0000007c /* Descriptor Skip Length */ +#define DMA_BUS_MODE_DSL_SHIFT 2 /* (in DWORDS) */ +/* Programmable burst length (passed thorugh platform)*/ +#define DMA_BUS_MODE_PBL_MASK 0x00003f00 /* Programmable Burst Len */ +#define DMA_BUS_MODE_PBL_SHIFT 8 + +enum rx_tx_priority_ratio { + double_ratio = 0x00004000, /*2:1 */ + triple_ratio = 0x00008000, /*3:1 */ + quadruple_ratio = 0x0000c000, /*4:1 */ +}; + +#define DMA_BUS_MODE_FB 0x00010000 /* Fixed burst */ +#define DMA_BUS_MODE_RPBL_MASK 0x003e0000 /* Rx-Programmable Burst Len */ +#define DMA_BUS_MODE_RPBL_SHIFT 17 +#define DMA_BUS_MODE_USP 0x00800000 +#define DMA_BUS_MODE_4PBL 0x01000000 +#define DMA_BUS_MODE_AAL 0x02000000 + +/* DMA CRS Control and Status Register Mapping */ +#define DMA_HOST_TX_DESC 0x00001048 /* Current Host Tx descriptor */ +#define DMA_HOST_RX_DESC 0x0000104c /* Current Host Rx descriptor */ +/* DMA Bus Mode register defines */ +#define DMA_BUS_PR_RATIO_MASK 0x0000c000 /* Rx/Tx priority ratio */ +#define DMA_BUS_PR_RATIO_SHIFT 14 +#define DMA_BUS_FB 0x00010000 /* Fixed Burst */ + +/* DMA operation mode defines (start/stop tx/rx are placed in common header)*/ +#define DMA_CONTROL_DT 0x04000000 /* Disable Drop TCP/IP csum error */ +#define DMA_CONTROL_RSF 0x02000000 /* Receive Store and Forward */ +#define DMA_CONTROL_DFF 0x01000000 /* Disaable flushing */ +/* Theshold for Activating the FC */ +enum rfa { + act_full_minus_1 = 0x00800000, + act_full_minus_2 = 0x00800200, + act_full_minus_3 = 0x00800400, + act_full_minus_4 = 0x00800600, +}; +/* Theshold for Deactivating the FC */ +enum rfd { + deac_full_minus_1 = 0x00400000, + deac_full_minus_2 = 0x00400800, + deac_full_minus_3 = 0x00401000, + deac_full_minus_4 = 0x00401800, +}; +#define DMA_CONTROL_TSF 0x00200000 /* Transmit Store and Forward */ +#define DMA_CONTROL_FTF 0x00100000 /* Flush transmit FIFO */ + +enum ttc_control { + DMA_CONTROL_TTC_64 = 0x00000000, + DMA_CONTROL_TTC_128 = 0x00004000, + DMA_CONTROL_TTC_192 = 0x00008000, + DMA_CONTROL_TTC_256 = 0x0000c000, + DMA_CONTROL_TTC_40 = 0x00010000, + DMA_CONTROL_TTC_32 = 0x00014000, + DMA_CONTROL_TTC_24 = 0x00018000, + DMA_CONTROL_TTC_16 = 0x0001c000, +}; +#define DMA_CONTROL_TC_TX_MASK 0xfffe3fff + +#define DMA_CONTROL_EFC 0x00000100 +#define DMA_CONTROL_FEF 0x00000080 +#define DMA_CONTROL_FUF 0x00000040 + +enum rtc_control { + DMA_CONTROL_RTC_64 = 0x00000000, + DMA_CONTROL_RTC_32 = 0x00000008, + DMA_CONTROL_RTC_96 = 0x00000010, + DMA_CONTROL_RTC_128 = 0x00000018, +}; +#define DMA_CONTROL_TC_RX_MASK 0xffffffe7 + +#define DMA_CONTROL_OSF 0x00000004 /* Operate on second frame */ + +/* MMC registers offset */ +#define GMAC_MMC_CTRL 0x100 +#define GMAC_MMC_RX_INTR 0x104 +#define GMAC_MMC_TX_INTR 0x108 +#define GMAC_MMC_RX_CSUM_OFFLOAD 0x208 diff --git a/drivers/net/stmmac/mac100.c b/drivers/net/stmmac/mac100.c new file mode 100644 index 000000000000..625171b6062b --- /dev/null +++ b/drivers/net/stmmac/mac100.c @@ -0,0 +1,517 @@ +/******************************************************************************* + This is the driver for the MAC 10/100 on-chip Ethernet controller + currently tested on all the ST boards based on STb7109 and stx7200 SoCs. + + DWC Ether MAC 10/100 Universal version 4.0 has been used for developing + this code. + + Copyright (C) 2007-2009 STMicroelectronics Ltd + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> +*******************************************************************************/ + +#include <linux/netdevice.h> +#include <linux/crc32.h> +#include <linux/mii.h> +#include <linux/phy.h> + +#include "common.h" +#include "mac100.h" + +#undef MAC100_DEBUG +/*#define MAC100_DEBUG*/ +#ifdef MAC100_DEBUG +#define DBG(fmt, args...) printk(fmt, ## args) +#else +#define DBG(fmt, args...) do { } while (0) +#endif + +static void mac100_core_init(unsigned long ioaddr) +{ + u32 value = readl(ioaddr + MAC_CONTROL); + + writel((value | MAC_CORE_INIT), ioaddr + MAC_CONTROL); + +#ifdef STMMAC_VLAN_TAG_USED + writel(ETH_P_8021Q, ioaddr + MAC_VLAN1); +#endif + return; +} + +static void mac100_dump_mac_regs(unsigned long ioaddr) +{ + pr_info("\t----------------------------------------------\n" + "\t MAC100 CSR (base addr = 0x%8x)\n" + "\t----------------------------------------------\n", + (unsigned int)ioaddr); + pr_info("\tcontrol reg (offset 0x%x): 0x%08x\n", MAC_CONTROL, + readl(ioaddr + MAC_CONTROL)); + pr_info("\taddr HI (offset 0x%x): 0x%08x\n ", MAC_ADDR_HIGH, + readl(ioaddr + MAC_ADDR_HIGH)); + pr_info("\taddr LO (offset 0x%x): 0x%08x\n", MAC_ADDR_LOW, + readl(ioaddr + MAC_ADDR_LOW)); + pr_info("\tmulticast hash HI (offset 0x%x): 0x%08x\n", + MAC_HASH_HIGH, readl(ioaddr + MAC_HASH_HIGH)); + pr_info("\tmulticast hash LO (offset 0x%x): 0x%08x\n", + MAC_HASH_LOW, readl(ioaddr + MAC_HASH_LOW)); + pr_info("\tflow control (offset 0x%x): 0x%08x\n", + MAC_FLOW_CTRL, readl(ioaddr + MAC_FLOW_CTRL)); + pr_info("\tVLAN1 tag (offset 0x%x): 0x%08x\n", MAC_VLAN1, + readl(ioaddr + MAC_VLAN1)); + pr_info("\tVLAN2 tag (offset 0x%x): 0x%08x\n", MAC_VLAN2, + readl(ioaddr + MAC_VLAN2)); + pr_info("\n\tMAC management counter registers\n"); + pr_info("\t MMC crtl (offset 0x%x): 0x%08x\n", + MMC_CONTROL, readl(ioaddr + MMC_CONTROL)); + pr_info("\t MMC High Interrupt (offset 0x%x): 0x%08x\n", + MMC_HIGH_INTR, readl(ioaddr + MMC_HIGH_INTR)); + pr_info("\t MMC Low Interrupt (offset 0x%x): 0x%08x\n", + MMC_LOW_INTR, readl(ioaddr + MMC_LOW_INTR)); + pr_info("\t MMC High Interrupt Mask (offset 0x%x): 0x%08x\n", + MMC_HIGH_INTR_MASK, readl(ioaddr + MMC_HIGH_INTR_MASK)); + pr_info("\t MMC Low Interrupt Mask (offset 0x%x): 0x%08x\n", + MMC_LOW_INTR_MASK, readl(ioaddr + MMC_LOW_INTR_MASK)); + return; +} + +static int mac100_dma_init(unsigned long ioaddr, int pbl, u32 dma_tx, + u32 dma_rx) +{ + u32 value = readl(ioaddr + DMA_BUS_MODE); + /* DMA SW reset */ + value |= DMA_BUS_MODE_SFT_RESET; + writel(value, ioaddr + DMA_BUS_MODE); + do {} while ((readl(ioaddr + DMA_BUS_MODE) & DMA_BUS_MODE_SFT_RESET)); + + /* Enable Application Access by writing to DMA CSR0 */ + writel(DMA_BUS_MODE_DEFAULT | (pbl << DMA_BUS_MODE_PBL_SHIFT), + ioaddr + DMA_BUS_MODE); + + /* Mask interrupts by writing to CSR7 */ + writel(DMA_INTR_DEFAULT_MASK, ioaddr + DMA_INTR_ENA); + + /* The base address of the RX/TX descriptor lists must be written into + * DMA CSR3 and CSR4, respectively. */ + writel(dma_tx, ioaddr + DMA_TX_BASE_ADDR); + writel(dma_rx, ioaddr + DMA_RCV_BASE_ADDR); + + return 0; +} + +/* Store and Forward capability is not used at all.. + * The transmit threshold can be programmed by + * setting the TTC bits in the DMA control register.*/ +static void mac100_dma_operation_mode(unsigned long ioaddr, int txmode, + int rxmode) +{ + u32 csr6 = readl(ioaddr + DMA_CONTROL); + + if (txmode <= 32) + csr6 |= DMA_CONTROL_TTC_32; + else if (txmode <= 64) + csr6 |= DMA_CONTROL_TTC_64; + else + csr6 |= DMA_CONTROL_TTC_128; + + writel(csr6, ioaddr + DMA_CONTROL); + + return; +} + +static void mac100_dump_dma_regs(unsigned long ioaddr) +{ + int i; + + DBG(KERN_DEBUG "MAC100 DMA CSR \n"); + for (i = 0; i < 9; i++) + pr_debug("\t CSR%d (offset 0x%x): 0x%08x\n", i, + (DMA_BUS_MODE + i * 4), + readl(ioaddr + DMA_BUS_MODE + i * 4)); + DBG(KERN_DEBUG "\t CSR20 (offset 0x%x): 0x%08x\n", + DMA_CUR_TX_BUF_ADDR, readl(ioaddr + DMA_CUR_TX_BUF_ADDR)); + DBG(KERN_DEBUG "\t CSR21 (offset 0x%x): 0x%08x\n", + DMA_CUR_RX_BUF_ADDR, readl(ioaddr + DMA_CUR_RX_BUF_ADDR)); + return; +} + +/* DMA controller has two counters to track the number of + the receive missed frames. */ +static void mac100_dma_diagnostic_fr(void *data, struct stmmac_extra_stats *x, + unsigned long ioaddr) +{ + struct net_device_stats *stats = (struct net_device_stats *)data; + u32 csr8 = readl(ioaddr + DMA_MISSED_FRAME_CTR); + + if (unlikely(csr8)) { + if (csr8 & DMA_MISSED_FRAME_OVE) { + stats->rx_over_errors += 0x800; + x->rx_overflow_cntr += 0x800; + } else { + unsigned int ove_cntr; + ove_cntr = ((csr8 & DMA_MISSED_FRAME_OVE_CNTR) >> 17); + stats->rx_over_errors += ove_cntr; + x->rx_overflow_cntr += ove_cntr; + } + + if (csr8 & DMA_MISSED_FRAME_OVE_M) { + stats->rx_missed_errors += 0xffff; + x->rx_missed_cntr += 0xffff; + } else { + unsigned int miss_f = (csr8 & DMA_MISSED_FRAME_M_CNTR); + stats->rx_missed_errors += miss_f; + x->rx_missed_cntr += miss_f; + } + } + return; +} + +static int mac100_get_tx_frame_status(void *data, struct stmmac_extra_stats *x, + struct dma_desc *p, unsigned long ioaddr) +{ + int ret = 0; + struct net_device_stats *stats = (struct net_device_stats *)data; + + if (unlikely(p->des01.tx.error_summary)) { + if (unlikely(p->des01.tx.underflow_error)) { + x->tx_underflow++; + stats->tx_fifo_errors++; + } + if (unlikely(p->des01.tx.no_carrier)) { + x->tx_carrier++; + stats->tx_carrier_errors++; + } + if (unlikely(p->des01.tx.loss_carrier)) { + x->tx_losscarrier++; + stats->tx_carrier_errors++; + } + if (unlikely((p->des01.tx.excessive_deferral) || + (p->des01.tx.excessive_collisions) || + (p->des01.tx.late_collision))) + stats->collisions += p->des01.tx.collision_count; + ret = -1; + } + if (unlikely(p->des01.tx.heartbeat_fail)) { + x->tx_heartbeat++; + stats->tx_heartbeat_errors++; + ret = -1; + } + if (unlikely(p->des01.tx.deferred)) + x->tx_deferred++; + + return ret; +} + +static int mac100_get_tx_len(struct dma_desc *p) +{ + return p->des01.tx.buffer1_size; +} + +/* This function verifies if each incoming frame has some errors + * and, if required, updates the multicast statistics. + * In case of success, it returns csum_none becasue the device + * is not able to compute the csum in HW. */ +static int mac100_get_rx_frame_status(void *data, struct stmmac_extra_stats *x, + struct dma_desc *p) +{ + int ret = csum_none; + struct net_device_stats *stats = (struct net_device_stats *)data; + + if (unlikely(p->des01.rx.last_descriptor == 0)) { + pr_warning("mac100 Error: Oversized Ethernet " + "frame spanned multiple buffers\n"); + stats->rx_length_errors++; + return discard_frame; + } + + if (unlikely(p->des01.rx.error_summary)) { + if (unlikely(p->des01.rx.descriptor_error)) + x->rx_desc++; + if (unlikely(p->des01.rx.partial_frame_error)) + x->rx_partial++; + if (unlikely(p->des01.rx.run_frame)) + x->rx_runt++; + if (unlikely(p->des01.rx.frame_too_long)) + x->rx_toolong++; + if (unlikely(p->des01.rx.collision)) { + x->rx_collision++; + stats->collisions++; + } + if (unlikely(p->des01.rx.crc_error)) { + x->rx_crc++; + stats->rx_crc_errors++; + } + ret = discard_frame; + } + if (unlikely(p->des01.rx.dribbling)) + ret = discard_frame; + + if (unlikely(p->des01.rx.length_error)) { + x->rx_lenght++; + ret = discard_frame; + } + if (unlikely(p->des01.rx.mii_error)) { + x->rx_mii++; + ret = discard_frame; + } + if (p->des01.rx.multicast_frame) { + x->rx_multicast++; + stats->multicast++; + } + return ret; +} + +static void mac100_irq_status(unsigned long ioaddr) +{ + return; +} + +static void mac100_set_umac_addr(unsigned long ioaddr, unsigned char *addr, + unsigned int reg_n) +{ + stmmac_set_mac_addr(ioaddr, addr, MAC_ADDR_HIGH, MAC_ADDR_LOW); +} + +static void mac100_get_umac_addr(unsigned long ioaddr, unsigned char *addr, + unsigned int reg_n) +{ + stmmac_get_mac_addr(ioaddr, addr, MAC_ADDR_HIGH, MAC_ADDR_LOW); +} + +static void mac100_set_filter(struct net_device *dev) +{ + unsigned long ioaddr = dev->base_addr; + u32 value = readl(ioaddr + MAC_CONTROL); + + if (dev->flags & IFF_PROMISC) { + value |= MAC_CONTROL_PR; + value &= ~(MAC_CONTROL_PM | MAC_CONTROL_IF | MAC_CONTROL_HO | + MAC_CONTROL_HP); + } else if ((dev->mc_count > HASH_TABLE_SIZE) + || (dev->flags & IFF_ALLMULTI)) { + value |= MAC_CONTROL_PM; + value &= ~(MAC_CONTROL_PR | MAC_CONTROL_IF | MAC_CONTROL_HO); + writel(0xffffffff, ioaddr + MAC_HASH_HIGH); + writel(0xffffffff, ioaddr + MAC_HASH_LOW); + } else if (dev->mc_count == 0) { /* no multicast */ + value &= ~(MAC_CONTROL_PM | MAC_CONTROL_PR | MAC_CONTROL_IF | + MAC_CONTROL_HO | MAC_CONTROL_HP); + } else { + int i; + u32 mc_filter[2]; + struct dev_mc_list *mclist; + + /* Perfect filter mode for physical address and Hash + filter for multicast */ + value |= MAC_CONTROL_HP; + value &= ~(MAC_CONTROL_PM | MAC_CONTROL_PR | MAC_CONTROL_IF + | MAC_CONTROL_HO); + + memset(mc_filter, 0, sizeof(mc_filter)); + for (i = 0, mclist = dev->mc_list; + mclist && i < dev->mc_count; i++, mclist = mclist->next) { + /* The upper 6 bits of the calculated CRC are used to + * index the contens of the hash table */ + int bit_nr = + ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26; + /* The most significant bit determines the register to + * use (H/L) while the other 5 bits determine the bit + * within the register. */ + mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31); + } + writel(mc_filter[0], ioaddr + MAC_HASH_LOW); + writel(mc_filter[1], ioaddr + MAC_HASH_HIGH); + } + + writel(value, ioaddr + MAC_CONTROL); + + DBG(KERN_INFO "%s: CTRL reg: 0x%08x Hash regs: " + "HI 0x%08x, LO 0x%08x\n", + __func__, readl(ioaddr + MAC_CONTROL), + readl(ioaddr + MAC_HASH_HIGH), readl(ioaddr + MAC_HASH_LOW)); + return; +} + +static void mac100_flow_ctrl(unsigned long ioaddr, unsigned int duplex, + unsigned int fc, unsigned int pause_time) +{ + unsigned int flow = MAC_FLOW_CTRL_ENABLE; + + if (duplex) + flow |= (pause_time << MAC_FLOW_CTRL_PT_SHIFT); + writel(flow, ioaddr + MAC_FLOW_CTRL); + + return; +} + +/* No PMT module supported in our SoC for the Ethernet Controller. */ +static void mac100_pmt(unsigned long ioaddr, unsigned long mode) +{ + return; +} + +static void mac100_init_rx_desc(struct dma_desc *p, unsigned int ring_size, + int disable_rx_ic) +{ + int i; + for (i = 0; i < ring_size; i++) { + p->des01.rx.own = 1; + p->des01.rx.buffer1_size = BUF_SIZE_2KiB - 1; + if (i == ring_size - 1) + p->des01.rx.end_ring = 1; + if (disable_rx_ic) + p->des01.rx.disable_ic = 1; + p++; + } + return; +} + +static void mac100_init_tx_desc(struct dma_desc *p, unsigned int ring_size) +{ + int i; + for (i = 0; i < ring_size; i++) { + p->des01.tx.own = 0; + if (i == ring_size - 1) + p->des01.tx.end_ring = 1; + p++; + } + return; +} + +static int mac100_get_tx_owner(struct dma_desc *p) +{ + return p->des01.tx.own; +} + +static int mac100_get_rx_owner(struct dma_desc *p) +{ + return p->des01.rx.own; +} + +static void mac100_set_tx_owner(struct dma_desc *p) +{ + p->des01.tx.own = 1; +} + +static void mac100_set_rx_owner(struct dma_desc *p) +{ + p->des01.rx.own = 1; +} + +static int mac100_get_tx_ls(struct dma_desc *p) +{ + return p->des01.tx.last_segment; +} + +static void mac100_release_tx_desc(struct dma_desc *p) +{ + int ter = p->des01.tx.end_ring; + + /* clean field used within the xmit */ + p->des01.tx.first_segment = 0; + p->des01.tx.last_segment = 0; + p->des01.tx.buffer1_size = 0; + + /* clean status reported */ + p->des01.tx.error_summary = 0; + p->des01.tx.underflow_error = 0; + p->des01.tx.no_carrier = 0; + p->des01.tx.loss_carrier = 0; + p->des01.tx.excessive_deferral = 0; + p->des01.tx.excessive_collisions = 0; + p->des01.tx.late_collision = 0; + p->des01.tx.heartbeat_fail = 0; + p->des01.tx.deferred = 0; + + /* set termination field */ + p->des01.tx.end_ring = ter; + + return; +} + +static void mac100_prepare_tx_desc(struct dma_desc *p, int is_fs, int len, + int csum_flag) +{ + p->des01.tx.first_segment = is_fs; + p->des01.tx.buffer1_size = len; +} + +static void mac100_clear_tx_ic(struct dma_desc *p) +{ + p->des01.tx.interrupt = 0; +} + +static void mac100_close_tx_desc(struct dma_desc *p) +{ + p->des01.tx.last_segment = 1; + p->des01.tx.interrupt = 1; +} + +static int mac100_get_rx_frame_len(struct dma_desc *p) +{ + return p->des01.rx.frame_length; +} + +struct stmmac_ops mac100_driver = { + .core_init = mac100_core_init, + .dump_mac_regs = mac100_dump_mac_regs, + .dma_init = mac100_dma_init, + .dump_dma_regs = mac100_dump_dma_regs, + .dma_mode = mac100_dma_operation_mode, + .dma_diagnostic_fr = mac100_dma_diagnostic_fr, + .tx_status = mac100_get_tx_frame_status, + .rx_status = mac100_get_rx_frame_status, + .get_tx_len = mac100_get_tx_len, + .set_filter = mac100_set_filter, + .flow_ctrl = mac100_flow_ctrl, + .pmt = mac100_pmt, + .init_rx_desc = mac100_init_rx_desc, + .init_tx_desc = mac100_init_tx_desc, + .get_tx_owner = mac100_get_tx_owner, + .get_rx_owner = mac100_get_rx_owner, + .release_tx_desc = mac100_release_tx_desc, + .prepare_tx_desc = mac100_prepare_tx_desc, + .clear_tx_ic = mac100_clear_tx_ic, + .close_tx_desc = mac100_close_tx_desc, + .get_tx_ls = mac100_get_tx_ls, + .set_tx_owner = mac100_set_tx_owner, + .set_rx_owner = mac100_set_rx_owner, + .get_rx_frame_len = mac100_get_rx_frame_len, + .host_irq_status = mac100_irq_status, + .set_umac_addr = mac100_set_umac_addr, + .get_umac_addr = mac100_get_umac_addr, +}; + +struct mac_device_info *mac100_setup(unsigned long ioaddr) +{ + struct mac_device_info *mac; + + mac = kzalloc(sizeof(const struct mac_device_info), GFP_KERNEL); + + pr_info("\tMAC 10/100\n"); + + mac->ops = &mac100_driver; + mac->hw.pmt = PMT_NOT_SUPPORTED; + mac->hw.link.port = MAC_CONTROL_PS; + mac->hw.link.duplex = MAC_CONTROL_F; + mac->hw.link.speed = 0; + mac->hw.mii.addr = MAC_MII_ADDR; + mac->hw.mii.data = MAC_MII_DATA; + + return mac; +} diff --git a/drivers/net/stmmac/mac100.h b/drivers/net/stmmac/mac100.h new file mode 100644 index 000000000000..0f8f110d004a --- /dev/null +++ b/drivers/net/stmmac/mac100.h @@ -0,0 +1,116 @@ +/******************************************************************************* + MAC 10/100 Header File + + Copyright (C) 2007-2009 STMicroelectronics Ltd + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> +*******************************************************************************/ + +/*---------------------------------------------------------------------------- + * MAC BLOCK defines + *---------------------------------------------------------------------------*/ +/* MAC CSR offset */ +#define MAC_CONTROL 0x00000000 /* MAC Control */ +#define MAC_ADDR_HIGH 0x00000004 /* MAC Address High */ +#define MAC_ADDR_LOW 0x00000008 /* MAC Address Low */ +#define MAC_HASH_HIGH 0x0000000c /* Multicast Hash Table High */ +#define MAC_HASH_LOW 0x00000010 /* Multicast Hash Table Low */ +#define MAC_MII_ADDR 0x00000014 /* MII Address */ +#define MAC_MII_DATA 0x00000018 /* MII Data */ +#define MAC_FLOW_CTRL 0x0000001c /* Flow Control */ +#define MAC_VLAN1 0x00000020 /* VLAN1 Tag */ +#define MAC_VLAN2 0x00000024 /* VLAN2 Tag */ + +/* MAC CTRL defines */ +#define MAC_CONTROL_RA 0x80000000 /* Receive All Mode */ +#define MAC_CONTROL_BLE 0x40000000 /* Endian Mode */ +#define MAC_CONTROL_HBD 0x10000000 /* Heartbeat Disable */ +#define MAC_CONTROL_PS 0x08000000 /* Port Select */ +#define MAC_CONTROL_DRO 0x00800000 /* Disable Receive Own */ +#define MAC_CONTROL_EXT_LOOPBACK 0x00400000 /* Reserved (ext loopback?) */ +#define MAC_CONTROL_OM 0x00200000 /* Loopback Operating Mode */ +#define MAC_CONTROL_F 0x00100000 /* Full Duplex Mode */ +#define MAC_CONTROL_PM 0x00080000 /* Pass All Multicast */ +#define MAC_CONTROL_PR 0x00040000 /* Promiscuous Mode */ +#define MAC_CONTROL_IF 0x00020000 /* Inverse Filtering */ +#define MAC_CONTROL_PB 0x00010000 /* Pass Bad Frames */ +#define MAC_CONTROL_HO 0x00008000 /* Hash Only Filtering Mode */ +#define MAC_CONTROL_HP 0x00002000 /* Hash/Perfect Filtering Mode */ +#define MAC_CONTROL_LCC 0x00001000 /* Late Collision Control */ +#define MAC_CONTROL_DBF 0x00000800 /* Disable Broadcast Frames */ +#define MAC_CONTROL_DRTY 0x00000400 /* Disable Retry */ +#define MAC_CONTROL_ASTP 0x00000100 /* Automatic Pad Stripping */ +#define MAC_CONTROL_BOLMT_10 0x00000000 /* Back Off Limit 10 */ +#define MAC_CONTROL_BOLMT_8 0x00000040 /* Back Off Limit 8 */ +#define MAC_CONTROL_BOLMT_4 0x00000080 /* Back Off Limit 4 */ +#define MAC_CONTROL_BOLMT_1 0x000000c0 /* Back Off Limit 1 */ +#define MAC_CONTROL_DC 0x00000020 /* Deferral Check */ +#define MAC_CONTROL_TE 0x00000008 /* Transmitter Enable */ +#define MAC_CONTROL_RE 0x00000004 /* Receiver Enable */ + +#define MAC_CORE_INIT (MAC_CONTROL_HBD | MAC_CONTROL_ASTP) + +/* MAC FLOW CTRL defines */ +#define MAC_FLOW_CTRL_PT_MASK 0xffff0000 /* Pause Time Mask */ +#define MAC_FLOW_CTRL_PT_SHIFT 16 +#define MAC_FLOW_CTRL_PASS 0x00000004 /* Pass Control Frames */ +#define MAC_FLOW_CTRL_ENABLE 0x00000002 /* Flow Control Enable */ +#define MAC_FLOW_CTRL_PAUSE 0x00000001 /* Flow Control Busy ... */ + +/* MII ADDR defines */ +#define MAC_MII_ADDR_WRITE 0x00000002 /* MII Write */ +#define MAC_MII_ADDR_BUSY 0x00000001 /* MII Busy */ + +/*---------------------------------------------------------------------------- + * DMA BLOCK defines + *---------------------------------------------------------------------------*/ + +/* DMA Bus Mode register defines */ +#define DMA_BUS_MODE_DBO 0x00100000 /* Descriptor Byte Ordering */ +#define DMA_BUS_MODE_BLE 0x00000080 /* Big Endian/Little Endian */ +#define DMA_BUS_MODE_PBL_MASK 0x00003f00 /* Programmable Burst Len */ +#define DMA_BUS_MODE_PBL_SHIFT 8 +#define DMA_BUS_MODE_DSL_MASK 0x0000007c /* Descriptor Skip Length */ +#define DMA_BUS_MODE_DSL_SHIFT 2 /* (in DWORDS) */ +#define DMA_BUS_MODE_BAR_BUS 0x00000002 /* Bar-Bus Arbitration */ +#define DMA_BUS_MODE_SFT_RESET 0x00000001 /* Software Reset */ +#define DMA_BUS_MODE_DEFAULT 0x00000000 + +/* DMA Control register defines */ +#define DMA_CONTROL_SF 0x00200000 /* Store And Forward */ + +/* Transmit Threshold Control */ +enum ttc_control { + DMA_CONTROL_TTC_DEFAULT = 0x00000000, /* Threshold is 32 DWORDS */ + DMA_CONTROL_TTC_64 = 0x00004000, /* Threshold is 64 DWORDS */ + DMA_CONTROL_TTC_128 = 0x00008000, /* Threshold is 128 DWORDS */ + DMA_CONTROL_TTC_256 = 0x0000c000, /* Threshold is 256 DWORDS */ + DMA_CONTROL_TTC_18 = 0x00400000, /* Threshold is 18 DWORDS */ + DMA_CONTROL_TTC_24 = 0x00404000, /* Threshold is 24 DWORDS */ + DMA_CONTROL_TTC_32 = 0x00408000, /* Threshold is 32 DWORDS */ + DMA_CONTROL_TTC_40 = 0x0040c000, /* Threshold is 40 DWORDS */ + DMA_CONTROL_SE = 0x00000008, /* Stop On Empty */ + DMA_CONTROL_OSF = 0x00000004, /* Operate On 2nd Frame */ +}; + +/* STMAC110 DMA Missed Frame Counter register defines */ +#define DMA_MISSED_FRAME_OVE 0x10000000 /* FIFO Overflow Overflow */ +#define DMA_MISSED_FRAME_OVE_CNTR 0x0ffe0000 /* Overflow Frame Counter */ +#define DMA_MISSED_FRAME_OVE_M 0x00010000 /* Missed Frame Overflow */ +#define DMA_MISSED_FRAME_M_CNTR 0x0000ffff /* Missed Frame Couinter */ diff --git a/drivers/net/stmmac/stmmac.h b/drivers/net/stmmac/stmmac.h new file mode 100644 index 000000000000..6d2eae3040e5 --- /dev/null +++ b/drivers/net/stmmac/stmmac.h @@ -0,0 +1,98 @@ +/******************************************************************************* + Copyright (C) 2007-2009 STMicroelectronics Ltd + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> +*******************************************************************************/ + +#define DRV_MODULE_VERSION "Oct_09" + +#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) +#define STMMAC_VLAN_TAG_USED +#include <linux/if_vlan.h> +#endif + +#include "common.h" +#ifdef CONFIG_STMMAC_TIMER +#include "stmmac_timer.h" +#endif + +struct stmmac_priv { + /* Frequently used values are kept adjacent for cache effect */ + struct dma_desc *dma_tx ____cacheline_aligned; + dma_addr_t dma_tx_phy; + struct sk_buff **tx_skbuff; + unsigned int cur_tx; + unsigned int dirty_tx; + unsigned int dma_tx_size; + int tx_coe; + int tx_coalesce; + + struct dma_desc *dma_rx ; + unsigned int cur_rx; + unsigned int dirty_rx; + struct sk_buff **rx_skbuff; + dma_addr_t *rx_skbuff_dma; + struct sk_buff_head rx_recycle; + + struct net_device *dev; + int is_gmac; + dma_addr_t dma_rx_phy; + unsigned int dma_rx_size; + int rx_csum; + unsigned int dma_buf_sz; + struct device *device; + struct mac_device_info *mac_type; + + struct stmmac_extra_stats xstats; + struct napi_struct napi; + + phy_interface_t phy_interface; + int pbl; + int bus_id; + int phy_addr; + int phy_mask; + int (*phy_reset) (void *priv); + void (*fix_mac_speed) (void *priv, unsigned int speed); + void *bsp_priv; + + int phy_irq; + struct phy_device *phydev; + int oldlink; + int speed; + int oldduplex; + unsigned int flow_ctrl; + unsigned int pause; + struct mii_bus *mii; + + u32 msg_enable; + spinlock_t lock; + int wolopts; + int wolenabled; + int shutdown; +#ifdef CONFIG_STMMAC_TIMER + struct stmmac_timer *tm; +#endif +#ifdef STMMAC_VLAN_TAG_USED + struct vlan_group *vlgrp; +#endif +}; + +extern int stmmac_mdio_unregister(struct net_device *ndev); +extern int stmmac_mdio_register(struct net_device *ndev); +extern void stmmac_set_ethtool_ops(struct net_device *netdev); diff --git a/drivers/net/stmmac/stmmac_ethtool.c b/drivers/net/stmmac/stmmac_ethtool.c new file mode 100644 index 000000000000..694ebe6a0758 --- /dev/null +++ b/drivers/net/stmmac/stmmac_ethtool.c @@ -0,0 +1,395 @@ +/******************************************************************************* + STMMAC Ethtool support + + Copyright (C) 2007-2009 STMicroelectronics Ltd + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> +*******************************************************************************/ + +#include <linux/etherdevice.h> +#include <linux/ethtool.h> +#include <linux/mii.h> +#include <linux/phy.h> + +#include "stmmac.h" + +#define REG_SPACE_SIZE 0x1054 +#define MAC100_ETHTOOL_NAME "st_mac100" +#define GMAC_ETHTOOL_NAME "st_gmac" + +struct stmmac_stats { + char stat_string[ETH_GSTRING_LEN]; + int sizeof_stat; + int stat_offset; +}; + +#define STMMAC_STAT(m) \ + { #m, FIELD_SIZEOF(struct stmmac_extra_stats, m), \ + offsetof(struct stmmac_priv, xstats.m)} + +static const struct stmmac_stats stmmac_gstrings_stats[] = { + STMMAC_STAT(tx_underflow), + STMMAC_STAT(tx_carrier), + STMMAC_STAT(tx_losscarrier), + STMMAC_STAT(tx_heartbeat), + STMMAC_STAT(tx_deferred), + STMMAC_STAT(tx_vlan), + STMMAC_STAT(rx_vlan), + STMMAC_STAT(tx_jabber), + STMMAC_STAT(tx_frame_flushed), + STMMAC_STAT(tx_payload_error), + STMMAC_STAT(tx_ip_header_error), + STMMAC_STAT(rx_desc), + STMMAC_STAT(rx_partial), + STMMAC_STAT(rx_runt), + STMMAC_STAT(rx_toolong), + STMMAC_STAT(rx_collision), + STMMAC_STAT(rx_crc), + STMMAC_STAT(rx_lenght), + STMMAC_STAT(rx_mii), + STMMAC_STAT(rx_multicast), + STMMAC_STAT(rx_gmac_overflow), + STMMAC_STAT(rx_watchdog), + STMMAC_STAT(da_rx_filter_fail), + STMMAC_STAT(sa_rx_filter_fail), + STMMAC_STAT(rx_missed_cntr), + STMMAC_STAT(rx_overflow_cntr), + STMMAC_STAT(tx_undeflow_irq), + STMMAC_STAT(tx_process_stopped_irq), + STMMAC_STAT(tx_jabber_irq), + STMMAC_STAT(rx_overflow_irq), + STMMAC_STAT(rx_buf_unav_irq), + STMMAC_STAT(rx_process_stopped_irq), + STMMAC_STAT(rx_watchdog_irq), + STMMAC_STAT(tx_early_irq), + STMMAC_STAT(fatal_bus_error_irq), + STMMAC_STAT(threshold), + STMMAC_STAT(tx_pkt_n), + STMMAC_STAT(rx_pkt_n), + STMMAC_STAT(poll_n), + STMMAC_STAT(sched_timer_n), + STMMAC_STAT(normal_irq_n), +}; +#define STMMAC_STATS_LEN ARRAY_SIZE(stmmac_gstrings_stats) + +void stmmac_ethtool_getdrvinfo(struct net_device *dev, + struct ethtool_drvinfo *info) +{ + struct stmmac_priv *priv = netdev_priv(dev); + + if (!priv->is_gmac) + strcpy(info->driver, MAC100_ETHTOOL_NAME); + else + strcpy(info->driver, GMAC_ETHTOOL_NAME); + + strcpy(info->version, DRV_MODULE_VERSION); + info->fw_version[0] = '\0'; + info->n_stats = STMMAC_STATS_LEN; + return; +} + +int stmmac_ethtool_getsettings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct stmmac_priv *priv = netdev_priv(dev); + struct phy_device *phy = priv->phydev; + int rc; + if (phy == NULL) { + pr_err("%s: %s: PHY is not registered\n", + __func__, dev->name); + return -ENODEV; + } + if (!netif_running(dev)) { + pr_err("%s: interface is disabled: we cannot track " + "link speed / duplex setting\n", dev->name); + return -EBUSY; + } + cmd->transceiver = XCVR_INTERNAL; + spin_lock_irq(&priv->lock); + rc = phy_ethtool_gset(phy, cmd); + spin_unlock_irq(&priv->lock); + return rc; +} + +int stmmac_ethtool_setsettings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct stmmac_priv *priv = netdev_priv(dev); + struct phy_device *phy = priv->phydev; + int rc; + + spin_lock(&priv->lock); + rc = phy_ethtool_sset(phy, cmd); + spin_unlock(&priv->lock); + + return rc; +} + +u32 stmmac_ethtool_getmsglevel(struct net_device *dev) +{ + struct stmmac_priv *priv = netdev_priv(dev); + return priv->msg_enable; +} + +void stmmac_ethtool_setmsglevel(struct net_device *dev, u32 level) +{ + struct stmmac_priv *priv = netdev_priv(dev); + priv->msg_enable = level; + +} + +int stmmac_check_if_running(struct net_device *dev) +{ + if (!netif_running(dev)) + return -EBUSY; + return 0; +} + +int stmmac_ethtool_get_regs_len(struct net_device *dev) +{ + return REG_SPACE_SIZE; +} + +void stmmac_ethtool_gregs(struct net_device *dev, + struct ethtool_regs *regs, void *space) +{ + int i; + u32 *reg_space = (u32 *) space; + + struct stmmac_priv *priv = netdev_priv(dev); + + memset(reg_space, 0x0, REG_SPACE_SIZE); + + if (!priv->is_gmac) { + /* MAC registers */ + for (i = 0; i < 12; i++) + reg_space[i] = readl(dev->base_addr + (i * 4)); + /* DMA registers */ + for (i = 0; i < 9; i++) + reg_space[i + 12] = + readl(dev->base_addr + (DMA_BUS_MODE + (i * 4))); + reg_space[22] = readl(dev->base_addr + DMA_CUR_TX_BUF_ADDR); + reg_space[23] = readl(dev->base_addr + DMA_CUR_RX_BUF_ADDR); + } else { + /* MAC registers */ + for (i = 0; i < 55; i++) + reg_space[i] = readl(dev->base_addr + (i * 4)); + /* DMA registers */ + for (i = 0; i < 22; i++) + reg_space[i + 55] = + readl(dev->base_addr + (DMA_BUS_MODE + (i * 4))); + } + + return; +} + +int stmmac_ethtool_set_tx_csum(struct net_device *netdev, u32 data) +{ + if (data) + netdev->features |= NETIF_F_HW_CSUM; + else + netdev->features &= ~NETIF_F_HW_CSUM; + + return 0; +} + +u32 stmmac_ethtool_get_rx_csum(struct net_device *dev) +{ + struct stmmac_priv *priv = netdev_priv(dev); + + return priv->rx_csum; +} + +static void +stmmac_get_pauseparam(struct net_device *netdev, + struct ethtool_pauseparam *pause) +{ + struct stmmac_priv *priv = netdev_priv(netdev); + + spin_lock(&priv->lock); + + pause->rx_pause = 0; + pause->tx_pause = 0; + pause->autoneg = priv->phydev->autoneg; + + if (priv->flow_ctrl & FLOW_RX) + pause->rx_pause = 1; + if (priv->flow_ctrl & FLOW_TX) + pause->tx_pause = 1; + + spin_unlock(&priv->lock); + return; +} + +static int +stmmac_set_pauseparam(struct net_device *netdev, + struct ethtool_pauseparam *pause) +{ + struct stmmac_priv *priv = netdev_priv(netdev); + struct phy_device *phy = priv->phydev; + int new_pause = FLOW_OFF; + int ret = 0; + + spin_lock(&priv->lock); + + if (pause->rx_pause) + new_pause |= FLOW_RX; + if (pause->tx_pause) + new_pause |= FLOW_TX; + + priv->flow_ctrl = new_pause; + + if (phy->autoneg) { + if (netif_running(netdev)) { + struct ethtool_cmd cmd; + /* auto-negotiation automatically restarted */ + cmd.cmd = ETHTOOL_NWAY_RST; + cmd.supported = phy->supported; + cmd.advertising = phy->advertising; + cmd.autoneg = phy->autoneg; + cmd.speed = phy->speed; + cmd.duplex = phy->duplex; + cmd.phy_address = phy->addr; + ret = phy_ethtool_sset(phy, &cmd); + } + } else { + unsigned long ioaddr = netdev->base_addr; + priv->mac_type->ops->flow_ctrl(ioaddr, phy->duplex, + priv->flow_ctrl, priv->pause); + } + spin_unlock(&priv->lock); + return ret; +} + +static void stmmac_get_ethtool_stats(struct net_device *dev, + struct ethtool_stats *dummy, u64 *data) +{ + struct stmmac_priv *priv = netdev_priv(dev); + unsigned long ioaddr = dev->base_addr; + int i; + + /* Update HW stats if supported */ + priv->mac_type->ops->dma_diagnostic_fr(&dev->stats, &priv->xstats, + ioaddr); + + for (i = 0; i < STMMAC_STATS_LEN; i++) { + char *p = (char *)priv + stmmac_gstrings_stats[i].stat_offset; + data[i] = (stmmac_gstrings_stats[i].sizeof_stat == + sizeof(u64)) ? (*(u64 *)p) : (*(u32 *)p); + } + + return; +} + +static int stmmac_get_sset_count(struct net_device *netdev, int sset) +{ + switch (sset) { + case ETH_SS_STATS: + return STMMAC_STATS_LEN; + default: + return -EOPNOTSUPP; + } +} + +static void stmmac_get_strings(struct net_device *dev, u32 stringset, u8 *data) +{ + int i; + u8 *p = data; + + switch (stringset) { + case ETH_SS_STATS: + for (i = 0; i < STMMAC_STATS_LEN; i++) { + memcpy(p, stmmac_gstrings_stats[i].stat_string, + ETH_GSTRING_LEN); + p += ETH_GSTRING_LEN; + } + break; + default: + WARN_ON(1); + break; + } + return; +} + +/* Currently only support WOL through Magic packet. */ +static void stmmac_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) +{ + struct stmmac_priv *priv = netdev_priv(dev); + + spin_lock_irq(&priv->lock); + if (priv->wolenabled == PMT_SUPPORTED) { + wol->supported = WAKE_MAGIC; + wol->wolopts = priv->wolopts; + } + spin_unlock_irq(&priv->lock); +} + +static int stmmac_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) +{ + struct stmmac_priv *priv = netdev_priv(dev); + u32 support = WAKE_MAGIC; + + if (priv->wolenabled == PMT_NOT_SUPPORTED) + return -EINVAL; + + if (wol->wolopts & ~support) + return -EINVAL; + + if (wol->wolopts == 0) + device_set_wakeup_enable(priv->device, 0); + else + device_set_wakeup_enable(priv->device, 1); + + spin_lock_irq(&priv->lock); + priv->wolopts = wol->wolopts; + spin_unlock_irq(&priv->lock); + + return 0; +} + +static struct ethtool_ops stmmac_ethtool_ops = { + .begin = stmmac_check_if_running, + .get_drvinfo = stmmac_ethtool_getdrvinfo, + .get_settings = stmmac_ethtool_getsettings, + .set_settings = stmmac_ethtool_setsettings, + .get_msglevel = stmmac_ethtool_getmsglevel, + .set_msglevel = stmmac_ethtool_setmsglevel, + .get_regs = stmmac_ethtool_gregs, + .get_regs_len = stmmac_ethtool_get_regs_len, + .get_link = ethtool_op_get_link, + .get_rx_csum = stmmac_ethtool_get_rx_csum, + .get_tx_csum = ethtool_op_get_tx_csum, + .set_tx_csum = stmmac_ethtool_set_tx_csum, + .get_sg = ethtool_op_get_sg, + .set_sg = ethtool_op_set_sg, + .get_pauseparam = stmmac_get_pauseparam, + .set_pauseparam = stmmac_set_pauseparam, + .get_ethtool_stats = stmmac_get_ethtool_stats, + .get_strings = stmmac_get_strings, + .get_wol = stmmac_get_wol, + .set_wol = stmmac_set_wol, + .get_sset_count = stmmac_get_sset_count, +#ifdef NETIF_F_TSO + .get_tso = ethtool_op_get_tso, + .set_tso = ethtool_op_set_tso, +#endif +}; + +void stmmac_set_ethtool_ops(struct net_device *netdev) +{ + SET_ETHTOOL_OPS(netdev, &stmmac_ethtool_ops); +} diff --git a/drivers/net/stmmac/stmmac_main.c b/drivers/net/stmmac/stmmac_main.c new file mode 100644 index 000000000000..c2f14dc9ba28 --- /dev/null +++ b/drivers/net/stmmac/stmmac_main.c @@ -0,0 +1,2204 @@ +/******************************************************************************* + This is the driver for the ST MAC 10/100/1000 on-chip Ethernet controllers. + ST Ethernet IPs are built around a Synopsys IP Core. + + Copyright (C) 2007-2009 STMicroelectronics Ltd + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> + + Documentation available at: + http://www.stlinux.com + Support available at: + https://bugzilla.stlinux.com/ +*******************************************************************************/ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/platform_device.h> +#include <linux/ip.h> +#include <linux/tcp.h> +#include <linux/skbuff.h> +#include <linux/ethtool.h> +#include <linux/if_ether.h> +#include <linux/crc32.h> +#include <linux/mii.h> +#include <linux/phy.h> +#include <linux/if_vlan.h> +#include <linux/dma-mapping.h> +#include <linux/stm/soc.h> +#include "stmmac.h" + +#define STMMAC_RESOURCE_NAME "stmmaceth" +#define PHY_RESOURCE_NAME "stmmacphy" + +#undef STMMAC_DEBUG +/*#define STMMAC_DEBUG*/ +#ifdef STMMAC_DEBUG +#define DBG(nlevel, klevel, fmt, args...) \ + ((void)(netif_msg_##nlevel(priv) && \ + printk(KERN_##klevel fmt, ## args))) +#else +#define DBG(nlevel, klevel, fmt, args...) do { } while (0) +#endif + +#undef STMMAC_RX_DEBUG +/*#define STMMAC_RX_DEBUG*/ +#ifdef STMMAC_RX_DEBUG +#define RX_DBG(fmt, args...) printk(fmt, ## args) +#else +#define RX_DBG(fmt, args...) do { } while (0) +#endif + +#undef STMMAC_XMIT_DEBUG +/*#define STMMAC_XMIT_DEBUG*/ +#ifdef STMMAC_TX_DEBUG +#define TX_DBG(fmt, args...) printk(fmt, ## args) +#else +#define TX_DBG(fmt, args...) do { } while (0) +#endif + +#define STMMAC_ALIGN(x) L1_CACHE_ALIGN(x) +#define JUMBO_LEN 9000 + +/* Module parameters */ +#define TX_TIMEO 5000 /* default 5 seconds */ +static int watchdog = TX_TIMEO; +module_param(watchdog, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(watchdog, "Transmit timeout in milliseconds"); + +static int debug = -1; /* -1: default, 0: no output, 16: all */ +module_param(debug, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Message Level (0: no output, 16: all)"); + +static int phyaddr = -1; +module_param(phyaddr, int, S_IRUGO); +MODULE_PARM_DESC(phyaddr, "Physical device address"); + +#define DMA_TX_SIZE 256 +static int dma_txsize = DMA_TX_SIZE; +module_param(dma_txsize, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(dma_txsize, "Number of descriptors in the TX list"); + +#define DMA_RX_SIZE 256 +static int dma_rxsize = DMA_RX_SIZE; +module_param(dma_rxsize, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(dma_rxsize, "Number of descriptors in the RX list"); + +static int flow_ctrl = FLOW_OFF; +module_param(flow_ctrl, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(flow_ctrl, "Flow control ability [on/off]"); + +static int pause = PAUSE_TIME; +module_param(pause, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(pause, "Flow Control Pause Time"); + +#define TC_DEFAULT 64 +static int tc = TC_DEFAULT; +module_param(tc, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(tc, "DMA threshold control value"); + +#define RX_NO_COALESCE 1 /* Always interrupt on completion */ +#define TX_NO_COALESCE -1 /* No moderation by default */ + +/* Pay attention to tune this parameter; take care of both + * hardware capability and network stabitily/performance impact. + * Many tests showed that ~4ms latency seems to be good enough. */ +#ifdef CONFIG_STMMAC_TIMER +#define DEFAULT_PERIODIC_RATE 256 +static int tmrate = DEFAULT_PERIODIC_RATE; +module_param(tmrate, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(tmrate, "External timer freq. (default: 256Hz)"); +#endif + +#define DMA_BUFFER_SIZE BUF_SIZE_2KiB +static int buf_sz = DMA_BUFFER_SIZE; +module_param(buf_sz, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(buf_sz, "DMA buffer size"); + +/* In case of Giga ETH, we can enable/disable the COE for the + * transmit HW checksum computation. + * Note that, if tx csum is off in HW, SG will be still supported. */ +static int tx_coe = HW_CSUM; +module_param(tx_coe, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(tx_coe, "GMAC COE type 2 [on/off]"); + +static const u32 default_msg_level = (NETIF_MSG_DRV | NETIF_MSG_PROBE | + NETIF_MSG_LINK | NETIF_MSG_IFUP | + NETIF_MSG_IFDOWN | NETIF_MSG_TIMER); + +static irqreturn_t stmmac_interrupt(int irq, void *dev_id); +static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev); + +/** + * stmmac_verify_args - verify the driver parameters. + * Description: it verifies if some wrong parameter is passed to the driver. + * Note that wrong parameters are replaced with the default values. + */ +static void stmmac_verify_args(void) +{ + if (unlikely(watchdog < 0)) + watchdog = TX_TIMEO; + if (unlikely(dma_rxsize < 0)) + dma_rxsize = DMA_RX_SIZE; + if (unlikely(dma_txsize < 0)) + dma_txsize = DMA_TX_SIZE; + if (unlikely((buf_sz < DMA_BUFFER_SIZE) || (buf_sz > BUF_SIZE_16KiB))) + buf_sz = DMA_BUFFER_SIZE; + if (unlikely(flow_ctrl > 1)) + flow_ctrl = FLOW_AUTO; + else if (likely(flow_ctrl < 0)) + flow_ctrl = FLOW_OFF; + if (unlikely((pause < 0) || (pause > 0xffff))) + pause = PAUSE_TIME; + + return; +} + +#if defined(STMMAC_XMIT_DEBUG) || defined(STMMAC_RX_DEBUG) +static void print_pkt(unsigned char *buf, int len) +{ + int j; + pr_info("len = %d byte, buf addr: 0x%p", len, buf); + for (j = 0; j < len; j++) { + if ((j % 16) == 0) + pr_info("\n %03x:", j); + pr_info(" %02x", buf[j]); + } + pr_info("\n"); + return; +} +#endif + +/* minimum number of free TX descriptors required to wake up TX process */ +#define STMMAC_TX_THRESH(x) (x->dma_tx_size/4) + +static inline u32 stmmac_tx_avail(struct stmmac_priv *priv) +{ + return priv->dirty_tx + priv->dma_tx_size - priv->cur_tx - 1; +} + +/** + * stmmac_adjust_link + * @dev: net device structure + * Description: it adjusts the link parameters. + */ +static void stmmac_adjust_link(struct net_device *dev) +{ + struct stmmac_priv *priv = netdev_priv(dev); + struct phy_device *phydev = priv->phydev; + unsigned long ioaddr = dev->base_addr; + unsigned long flags; + int new_state = 0; + unsigned int fc = priv->flow_ctrl, pause_time = priv->pause; + + if (phydev == NULL) + return; + + DBG(probe, DEBUG, "stmmac_adjust_link: called. address %d link %d\n", + phydev->addr, phydev->link); + + spin_lock_irqsave(&priv->lock, flags); + if (phydev->link) { + u32 ctrl = readl(ioaddr + MAC_CTRL_REG); + + /* Now we make sure that we can be in full duplex mode. + * If not, we operate in half-duplex mode. */ + if (phydev->duplex != priv->oldduplex) { + new_state = 1; + if (!(phydev->duplex)) + ctrl &= ~priv->mac_type->hw.link.duplex; + else + ctrl |= priv->mac_type->hw.link.duplex; + priv->oldduplex = phydev->duplex; + } + /* Flow Control operation */ + if (phydev->pause) + priv->mac_type->ops->flow_ctrl(ioaddr, phydev->duplex, + fc, pause_time); + + if (phydev->speed != priv->speed) { + new_state = 1; + switch (phydev->speed) { + case 1000: + if (likely(priv->is_gmac)) + ctrl &= ~priv->mac_type->hw.link.port; + break; + case 100: + case 10: + if (priv->is_gmac) { + ctrl |= priv->mac_type->hw.link.port; + if (phydev->speed == SPEED_100) { + ctrl |= + priv->mac_type->hw.link. + speed; + } else { + ctrl &= + ~(priv->mac_type->hw. + link.speed); + } + } else { + ctrl &= ~priv->mac_type->hw.link.port; + } + priv->fix_mac_speed(priv->bsp_priv, + phydev->speed); + break; + default: + if (netif_msg_link(priv)) + pr_warning("%s: Speed (%d) is not 10" + " or 100!\n", dev->name, phydev->speed); + break; + } + + priv->speed = phydev->speed; + } + + writel(ctrl, ioaddr + MAC_CTRL_REG); + + if (!priv->oldlink) { + new_state = 1; + priv->oldlink = 1; + } + } else if (priv->oldlink) { + new_state = 1; + priv->oldlink = 0; + priv->speed = 0; + priv->oldduplex = -1; + } + + if (new_state && netif_msg_link(priv)) + phy_print_status(phydev); + + spin_unlock_irqrestore(&priv->lock, flags); + + DBG(probe, DEBUG, "stmmac_adjust_link: exiting\n"); +} + +/** + * stmmac_init_phy - PHY initialization + * @dev: net device structure + * Description: it initializes the driver's PHY state, and attaches the PHY + * to the mac driver. + * Return value: + * 0 on success + */ +static int stmmac_init_phy(struct net_device *dev) +{ + struct stmmac_priv *priv = netdev_priv(dev); + struct phy_device *phydev; + char phy_id[BUS_ID_SIZE]; /* PHY to connect */ + char bus_id[BUS_ID_SIZE]; + + priv->oldlink = 0; + priv->speed = 0; + priv->oldduplex = -1; + + if (priv->phy_addr == -1) { + /* We don't have a PHY, so do nothing */ + return 0; + } + + snprintf(bus_id, MII_BUS_ID_SIZE, "%x", priv->bus_id); + snprintf(phy_id, BUS_ID_SIZE, PHY_ID_FMT, bus_id, priv->phy_addr); + pr_debug("stmmac_init_phy: trying to attach to %s\n", phy_id); + + phydev = phy_connect(dev, phy_id, &stmmac_adjust_link, 0, + priv->phy_interface); + + if (IS_ERR(phydev)) { + pr_err("%s: Could not attach to PHY\n", dev->name); + return PTR_ERR(phydev); + } + + /* + * Broken HW is sometimes missing the pull-up resistor on the + * MDIO line, which results in reads to non-existent devices returning + * 0 rather than 0xffff. Catch this here and treat 0 as a non-existent + * device as well. + * Note: phydev->phy_id is the result of reading the UID PHY registers. + */ + if (phydev->phy_id == 0) { + phy_disconnect(phydev); + return -ENODEV; + } + pr_debug("stmmac_init_phy: %s: attached to PHY (UID 0x%x)" + " Link = %d\n", dev->name, phydev->phy_id, phydev->link); + + priv->phydev = phydev; + + return 0; +} + +static inline void stmmac_mac_enable_rx(unsigned long ioaddr) +{ + u32 value = readl(ioaddr + MAC_CTRL_REG); + value |= MAC_RNABLE_RX; + /* Set the RE (receive enable bit into the MAC CTRL register). */ + writel(value, ioaddr + MAC_CTRL_REG); +} + +static inline void stmmac_mac_enable_tx(unsigned long ioaddr) +{ + u32 value = readl(ioaddr + MAC_CTRL_REG); + value |= MAC_ENABLE_TX; + /* Set the TE (transmit enable bit into the MAC CTRL register). */ + writel(value, ioaddr + MAC_CTRL_REG); +} + +static inline void stmmac_mac_disable_rx(unsigned long ioaddr) +{ + u32 value = readl(ioaddr + MAC_CTRL_REG); + value &= ~MAC_RNABLE_RX; + writel(value, ioaddr + MAC_CTRL_REG); +} + +static inline void stmmac_mac_disable_tx(unsigned long ioaddr) +{ + u32 value = readl(ioaddr + MAC_CTRL_REG); + value &= ~MAC_ENABLE_TX; + writel(value, ioaddr + MAC_CTRL_REG); +} + +/** + * display_ring + * @p: pointer to the ring. + * @size: size of the ring. + * Description: display all the descriptors within the ring. + */ +static void display_ring(struct dma_desc *p, int size) +{ + struct tmp_s { + u64 a; + unsigned int b; + unsigned int c; + }; + int i; + for (i = 0; i < size; i++) { + struct tmp_s *x = (struct tmp_s *)(p + i); + pr_info("\t%d [0x%x]: DES0=0x%x DES1=0x%x BUF1=0x%x BUF2=0x%x", + i, (unsigned int)virt_to_phys(&p[i]), + (unsigned int)(x->a), (unsigned int)((x->a) >> 32), + x->b, x->c); + pr_info("\n"); + } +} + +/** + * init_dma_desc_rings - init the RX/TX descriptor rings + * @dev: net device structure + * Description: this function initializes the DMA RX/TX descriptors + * and allocates the socket buffers. + */ +static void init_dma_desc_rings(struct net_device *dev) +{ + int i; + struct stmmac_priv *priv = netdev_priv(dev); + struct sk_buff *skb; + unsigned int txsize = priv->dma_tx_size; + unsigned int rxsize = priv->dma_rx_size; + unsigned int bfsize = priv->dma_buf_sz; + int buff2_needed = 0; + int dis_ic = 0; + +#ifdef CONFIG_STMMAC_TIMER + /* Using Timers disable interrupts on completion for the reception */ + dis_ic = 1; +#endif + /* Set the Buffer size according to the MTU; + * indeed, in case of jumbo we need to bump-up the buffer sizes. + */ + if (unlikely(dev->mtu >= BUF_SIZE_8KiB)) + bfsize = BUF_SIZE_16KiB; + else if (unlikely(dev->mtu >= BUF_SIZE_4KiB)) + bfsize = BUF_SIZE_8KiB; + else if (unlikely(dev->mtu >= BUF_SIZE_2KiB)) + bfsize = BUF_SIZE_4KiB; + else if (unlikely(dev->mtu >= DMA_BUFFER_SIZE)) + bfsize = BUF_SIZE_2KiB; + else + bfsize = DMA_BUFFER_SIZE; + + /* If the MTU exceeds 8k so use the second buffer in the chain */ + if (bfsize >= BUF_SIZE_8KiB) + buff2_needed = 1; + + DBG(probe, INFO, "stmmac: txsize %d, rxsize %d, bfsize %d\n", + txsize, rxsize, bfsize); + + priv->rx_skbuff_dma = kmalloc(rxsize * sizeof(dma_addr_t), GFP_KERNEL); + priv->rx_skbuff = + kmalloc(sizeof(struct sk_buff *) * rxsize, GFP_KERNEL); + priv->dma_rx = + (struct dma_desc *)dma_alloc_coherent(priv->device, + rxsize * + sizeof(struct dma_desc), + &priv->dma_rx_phy, + GFP_KERNEL); + priv->tx_skbuff = kmalloc(sizeof(struct sk_buff *) * txsize, + GFP_KERNEL); + priv->dma_tx = + (struct dma_desc *)dma_alloc_coherent(priv->device, + txsize * + sizeof(struct dma_desc), + &priv->dma_tx_phy, + GFP_KERNEL); + + if ((priv->dma_rx == NULL) || (priv->dma_tx == NULL)) { + pr_err("%s:ERROR allocating the DMA Tx/Rx desc\n", __func__); + return; + } + + DBG(probe, INFO, "stmmac (%s) DMA desc rings: virt addr (Rx %p, " + "Tx %p)\n\tDMA phy addr (Rx 0x%08x, Tx 0x%08x)\n", + dev->name, priv->dma_rx, priv->dma_tx, + (unsigned int)priv->dma_rx_phy, (unsigned int)priv->dma_tx_phy); + + /* RX INITIALIZATION */ + DBG(probe, INFO, "stmmac: SKB addresses:\n" + "skb\t\tskb data\tdma data\n"); + + for (i = 0; i < rxsize; i++) { + struct dma_desc *p = priv->dma_rx + i; + + skb = netdev_alloc_skb_ip_align(dev, bfsize); + if (unlikely(skb == NULL)) { + pr_err("%s: Rx init fails; skb is NULL\n", __func__); + break; + } + priv->rx_skbuff[i] = skb; + priv->rx_skbuff_dma[i] = dma_map_single(priv->device, skb->data, + bfsize, DMA_FROM_DEVICE); + + p->des2 = priv->rx_skbuff_dma[i]; + if (unlikely(buff2_needed)) + p->des3 = p->des2 + BUF_SIZE_8KiB; + DBG(probe, INFO, "[%p]\t[%p]\t[%x]\n", priv->rx_skbuff[i], + priv->rx_skbuff[i]->data, priv->rx_skbuff_dma[i]); + } + priv->cur_rx = 0; + priv->dirty_rx = (unsigned int)(i - rxsize); + priv->dma_buf_sz = bfsize; + buf_sz = bfsize; + + /* TX INITIALIZATION */ + for (i = 0; i < txsize; i++) { + priv->tx_skbuff[i] = NULL; + priv->dma_tx[i].des2 = 0; + } + priv->dirty_tx = 0; + priv->cur_tx = 0; + + /* Clear the Rx/Tx descriptors */ + priv->mac_type->ops->init_rx_desc(priv->dma_rx, rxsize, dis_ic); + priv->mac_type->ops->init_tx_desc(priv->dma_tx, txsize); + + if (netif_msg_hw(priv)) { + pr_info("RX descriptor ring:\n"); + display_ring(priv->dma_rx, rxsize); + pr_info("TX descriptor ring:\n"); + display_ring(priv->dma_tx, txsize); + } + return; +} + +static void dma_free_rx_skbufs(struct stmmac_priv *priv) +{ + int i; + + for (i = 0; i < priv->dma_rx_size; i++) { + if (priv->rx_skbuff[i]) { + dma_unmap_single(priv->device, priv->rx_skbuff_dma[i], + priv->dma_buf_sz, DMA_FROM_DEVICE); + dev_kfree_skb_any(priv->rx_skbuff[i]); + } + priv->rx_skbuff[i] = NULL; + } + return; +} + +static void dma_free_tx_skbufs(struct stmmac_priv *priv) +{ + int i; + + for (i = 0; i < priv->dma_tx_size; i++) { + if (priv->tx_skbuff[i] != NULL) { + struct dma_desc *p = priv->dma_tx + i; + if (p->des2) + dma_unmap_single(priv->device, p->des2, + priv->mac_type->ops->get_tx_len(p), + DMA_TO_DEVICE); + dev_kfree_skb_any(priv->tx_skbuff[i]); + priv->tx_skbuff[i] = NULL; + } + } + return; +} + +static void free_dma_desc_resources(struct stmmac_priv *priv) +{ + /* Release the DMA TX/RX socket buffers */ + dma_free_rx_skbufs(priv); + dma_free_tx_skbufs(priv); + + /* Free the region of consistent memory previously allocated for + * the DMA */ + dma_free_coherent(priv->device, + priv->dma_tx_size * sizeof(struct dma_desc), + priv->dma_tx, priv->dma_tx_phy); + dma_free_coherent(priv->device, + priv->dma_rx_size * sizeof(struct dma_desc), + priv->dma_rx, priv->dma_rx_phy); + kfree(priv->rx_skbuff_dma); + kfree(priv->rx_skbuff); + kfree(priv->tx_skbuff); + + return; +} + +/** + * stmmac_dma_start_tx + * @ioaddr: device I/O address + * Description: this function starts the DMA tx process. + */ +static void stmmac_dma_start_tx(unsigned long ioaddr) +{ + u32 value = readl(ioaddr + DMA_CONTROL); + value |= DMA_CONTROL_ST; + writel(value, ioaddr + DMA_CONTROL); + return; +} + +static void stmmac_dma_stop_tx(unsigned long ioaddr) +{ + u32 value = readl(ioaddr + DMA_CONTROL); + value &= ~DMA_CONTROL_ST; + writel(value, ioaddr + DMA_CONTROL); + return; +} + +/** + * stmmac_dma_start_rx + * @ioaddr: device I/O address + * Description: this function starts the DMA rx process. + */ +static void stmmac_dma_start_rx(unsigned long ioaddr) +{ + u32 value = readl(ioaddr + DMA_CONTROL); + value |= DMA_CONTROL_SR; + writel(value, ioaddr + DMA_CONTROL); + + return; +} + +static void stmmac_dma_stop_rx(unsigned long ioaddr) +{ + u32 value = readl(ioaddr + DMA_CONTROL); + value &= ~DMA_CONTROL_SR; + writel(value, ioaddr + DMA_CONTROL); + + return; +} + +/** + * stmmac_dma_operation_mode - HW DMA operation mode + * @priv : pointer to the private device structure. + * Description: it sets the DMA operation mode: tx/rx DMA thresholds + * or Store-And-Forward capability. It also verifies the COE for the + * transmission in case of Giga ETH. + */ +static void stmmac_dma_operation_mode(struct stmmac_priv *priv) +{ + if (!priv->is_gmac) { + /* MAC 10/100 */ + priv->mac_type->ops->dma_mode(priv->dev->base_addr, tc, 0); + priv->tx_coe = NO_HW_CSUM; + } else { + if ((priv->dev->mtu <= ETH_DATA_LEN) && (tx_coe)) { + priv->mac_type->ops->dma_mode(priv->dev->base_addr, + SF_DMA_MODE, SF_DMA_MODE); + tc = SF_DMA_MODE; + priv->tx_coe = HW_CSUM; + } else { + /* Checksum computation is performed in software. */ + priv->mac_type->ops->dma_mode(priv->dev->base_addr, tc, + SF_DMA_MODE); + priv->tx_coe = NO_HW_CSUM; + } + } + tx_coe = priv->tx_coe; + + return; +} + +#ifdef STMMAC_DEBUG +/** + * show_tx_process_state + * @status: tx descriptor status field + * Description: it shows the Transmit Process State for CSR5[22:20] + */ +static void show_tx_process_state(unsigned int status) +{ + unsigned int state; + state = (status & DMA_STATUS_TS_MASK) >> DMA_STATUS_TS_SHIFT; + + switch (state) { + case 0: + pr_info("- TX (Stopped): Reset or Stop command\n"); + break; + case 1: + pr_info("- TX (Running):Fetching the Tx desc\n"); + break; + case 2: + pr_info("- TX (Running): Waiting for end of tx\n"); + break; + case 3: + pr_info("- TX (Running): Reading the data " + "and queuing the data into the Tx buf\n"); + break; + case 6: + pr_info("- TX (Suspended): Tx Buff Underflow " + "or an unavailable Transmit descriptor\n"); + break; + case 7: + pr_info("- TX (Running): Closing Tx descriptor\n"); + break; + default: + break; + } + return; +} + +/** + * show_rx_process_state + * @status: rx descriptor status field + * Description: it shows the Receive Process State for CSR5[19:17] + */ +static void show_rx_process_state(unsigned int status) +{ + unsigned int state; + state = (status & DMA_STATUS_RS_MASK) >> DMA_STATUS_RS_SHIFT; + + switch (state) { + case 0: + pr_info("- RX (Stopped): Reset or Stop command\n"); + break; + case 1: + pr_info("- RX (Running): Fetching the Rx desc\n"); + break; + case 2: + pr_info("- RX (Running):Checking for end of pkt\n"); + break; + case 3: + pr_info("- RX (Running): Waiting for Rx pkt\n"); + break; + case 4: + pr_info("- RX (Suspended): Unavailable Rx buf\n"); + break; + case 5: + pr_info("- RX (Running): Closing Rx descriptor\n"); + break; + case 6: + pr_info("- RX(Running): Flushing the current frame" + " from the Rx buf\n"); + break; + case 7: + pr_info("- RX (Running): Queuing the Rx frame" + " from the Rx buf into memory\n"); + break; + default: + break; + } + return; +} +#endif + +/** + * stmmac_tx: + * @priv: private driver structure + * Description: it reclaims resources after transmission completes. + */ +static void stmmac_tx(struct stmmac_priv *priv) +{ + unsigned int txsize = priv->dma_tx_size; + unsigned long ioaddr = priv->dev->base_addr; + + while (priv->dirty_tx != priv->cur_tx) { + int last; + unsigned int entry = priv->dirty_tx % txsize; + struct sk_buff *skb = priv->tx_skbuff[entry]; + struct dma_desc *p = priv->dma_tx + entry; + + /* Check if the descriptor is owned by the DMA. */ + if (priv->mac_type->ops->get_tx_owner(p)) + break; + + /* Verify tx error by looking at the last segment */ + last = priv->mac_type->ops->get_tx_ls(p); + if (likely(last)) { + int tx_error = + priv->mac_type->ops->tx_status(&priv->dev->stats, + &priv->xstats, + p, ioaddr); + if (likely(tx_error == 0)) { + priv->dev->stats.tx_packets++; + priv->xstats.tx_pkt_n++; + } else + priv->dev->stats.tx_errors++; + } + TX_DBG("%s: curr %d, dirty %d\n", __func__, + priv->cur_tx, priv->dirty_tx); + + if (likely(p->des2)) + dma_unmap_single(priv->device, p->des2, + priv->mac_type->ops->get_tx_len(p), + DMA_TO_DEVICE); + if (unlikely(p->des3)) + p->des3 = 0; + + if (likely(skb != NULL)) { + /* + * If there's room in the queue (limit it to size) + * we add this skb back into the pool, + * if it's the right size. + */ + if ((skb_queue_len(&priv->rx_recycle) < + priv->dma_rx_size) && + skb_recycle_check(skb, priv->dma_buf_sz)) + __skb_queue_head(&priv->rx_recycle, skb); + else + dev_kfree_skb(skb); + + priv->tx_skbuff[entry] = NULL; + } + + priv->mac_type->ops->release_tx_desc(p); + + entry = (++priv->dirty_tx) % txsize; + } + if (unlikely(netif_queue_stopped(priv->dev) && + stmmac_tx_avail(priv) > STMMAC_TX_THRESH(priv))) { + netif_tx_lock(priv->dev); + if (netif_queue_stopped(priv->dev) && + stmmac_tx_avail(priv) > STMMAC_TX_THRESH(priv)) { + TX_DBG("%s: restart transmit\n", __func__); + netif_wake_queue(priv->dev); + } + netif_tx_unlock(priv->dev); + } + return; +} + +static inline void stmmac_enable_irq(struct stmmac_priv *priv) +{ +#ifndef CONFIG_STMMAC_TIMER + writel(DMA_INTR_DEFAULT_MASK, priv->dev->base_addr + DMA_INTR_ENA); +#else + priv->tm->timer_start(tmrate); +#endif +} + +static inline void stmmac_disable_irq(struct stmmac_priv *priv) +{ +#ifndef CONFIG_STMMAC_TIMER + writel(0, priv->dev->base_addr + DMA_INTR_ENA); +#else + priv->tm->timer_stop(); +#endif +} + +static int stmmac_has_work(struct stmmac_priv *priv) +{ + unsigned int has_work = 0; + int rxret, tx_work = 0; + + rxret = priv->mac_type->ops->get_rx_owner(priv->dma_rx + + (priv->cur_rx % priv->dma_rx_size)); + + if (priv->dirty_tx != priv->cur_tx) + tx_work = 1; + + if (likely(!rxret || tx_work)) + has_work = 1; + + return has_work; +} + +static inline void _stmmac_schedule(struct stmmac_priv *priv) +{ + if (likely(stmmac_has_work(priv))) { + stmmac_disable_irq(priv); + napi_schedule(&priv->napi); + } +} + +#ifdef CONFIG_STMMAC_TIMER +void stmmac_schedule(struct net_device *dev) +{ + struct stmmac_priv *priv = netdev_priv(dev); + + priv->xstats.sched_timer_n++; + + _stmmac_schedule(priv); + + return; +} + +static void stmmac_no_timer_started(unsigned int x) +{; +}; + +static void stmmac_no_timer_stopped(void) +{; +}; +#endif + +/** + * stmmac_tx_err: + * @priv: pointer to the private device structure + * Description: it cleans the descriptors and restarts the transmission + * in case of errors. + */ +static void stmmac_tx_err(struct stmmac_priv *priv) +{ + netif_stop_queue(priv->dev); + + stmmac_dma_stop_tx(priv->dev->base_addr); + dma_free_tx_skbufs(priv); + priv->mac_type->ops->init_tx_desc(priv->dma_tx, priv->dma_tx_size); + priv->dirty_tx = 0; + priv->cur_tx = 0; + stmmac_dma_start_tx(priv->dev->base_addr); + + priv->dev->stats.tx_errors++; + netif_wake_queue(priv->dev); + + return; +} + +/** + * stmmac_dma_interrupt - Interrupt handler for the driver + * @dev: net device structure + * Description: Interrupt handler for the driver (DMA). + */ +static void stmmac_dma_interrupt(struct net_device *dev) +{ + unsigned long ioaddr = dev->base_addr; + struct stmmac_priv *priv = netdev_priv(dev); + /* read the status register (CSR5) */ + u32 intr_status = readl(ioaddr + DMA_STATUS); + + DBG(intr, INFO, "%s: [CSR5: 0x%08x]\n", __func__, intr_status); + +#ifdef STMMAC_DEBUG + /* It displays the DMA transmit process state (CSR5 register) */ + if (netif_msg_tx_done(priv)) + show_tx_process_state(intr_status); + if (netif_msg_rx_status(priv)) + show_rx_process_state(intr_status); +#endif + /* ABNORMAL interrupts */ + if (unlikely(intr_status & DMA_STATUS_AIS)) { + DBG(intr, INFO, "CSR5[15] DMA ABNORMAL IRQ: "); + if (unlikely(intr_status & DMA_STATUS_UNF)) { + DBG(intr, INFO, "transmit underflow\n"); + if (unlikely(tc != SF_DMA_MODE) + && (tc <= 256)) { + /* Try to bump up the threshold */ + tc += 64; + priv->mac_type->ops->dma_mode(ioaddr, tc, + SF_DMA_MODE); + priv->xstats.threshold = tc; + } + stmmac_tx_err(priv); + priv->xstats.tx_undeflow_irq++; + } + if (unlikely(intr_status & DMA_STATUS_TJT)) { + DBG(intr, INFO, "transmit jabber\n"); + priv->xstats.tx_jabber_irq++; + } + if (unlikely(intr_status & DMA_STATUS_OVF)) { + DBG(intr, INFO, "recv overflow\n"); + priv->xstats.rx_overflow_irq++; + } + if (unlikely(intr_status & DMA_STATUS_RU)) { + DBG(intr, INFO, "receive buffer unavailable\n"); + priv->xstats.rx_buf_unav_irq++; + } + if (unlikely(intr_status & DMA_STATUS_RPS)) { + DBG(intr, INFO, "receive process stopped\n"); + priv->xstats.rx_process_stopped_irq++; + } + if (unlikely(intr_status & DMA_STATUS_RWT)) { + DBG(intr, INFO, "receive watchdog\n"); + priv->xstats.rx_watchdog_irq++; + } + if (unlikely(intr_status & DMA_STATUS_ETI)) { + DBG(intr, INFO, "transmit early interrupt\n"); + priv->xstats.tx_early_irq++; + } + if (unlikely(intr_status & DMA_STATUS_TPS)) { + DBG(intr, INFO, "transmit process stopped\n"); + priv->xstats.tx_process_stopped_irq++; + stmmac_tx_err(priv); + } + if (unlikely(intr_status & DMA_STATUS_FBI)) { + DBG(intr, INFO, "fatal bus error\n"); + priv->xstats.fatal_bus_error_irq++; + stmmac_tx_err(priv); + } + } + + /* TX/RX NORMAL interrupts */ + if (intr_status & DMA_STATUS_NIS) { + priv->xstats.normal_irq_n++; + if (likely((intr_status & DMA_STATUS_RI) || + (intr_status & (DMA_STATUS_TI)))) + _stmmac_schedule(priv); + } + + /* Optional hardware blocks, interrupts should be disabled */ + if (unlikely(intr_status & + (DMA_STATUS_GPI | DMA_STATUS_GMI | DMA_STATUS_GLI))) + pr_info("%s: unexpected status %08x\n", __func__, intr_status); + + /* Clear the interrupt by writing a logic 1 to the CSR5[15-0] */ + writel((intr_status & 0x1ffff), ioaddr + DMA_STATUS); + + DBG(intr, INFO, "\n\n"); + + return; +} + +/** + * stmmac_open - open entry point of the driver + * @dev : pointer to the device structure. + * Description: + * This function is the open entry point of the driver. + * Return value: + * 0 on success and an appropriate (-)ve integer as defined in errno.h + * file on failure. + */ +static int stmmac_open(struct net_device *dev) +{ + struct stmmac_priv *priv = netdev_priv(dev); + unsigned long ioaddr = dev->base_addr; + int ret; + + /* Check that the MAC address is valid. If its not, refuse + * to bring the device up. The user must specify an + * address using the following linux command: + * ifconfig eth0 hw ether xx:xx:xx:xx:xx:xx */ + if (!is_valid_ether_addr(dev->dev_addr)) { + random_ether_addr(dev->dev_addr); + pr_warning("%s: generated random MAC address %pM\n", dev->name, + dev->dev_addr); + } + + stmmac_verify_args(); + + ret = stmmac_init_phy(dev); + if (unlikely(ret)) { + pr_err("%s: Cannot attach to PHY (error: %d)\n", __func__, ret); + return ret; + } + + /* Request the IRQ lines */ + ret = request_irq(dev->irq, &stmmac_interrupt, + IRQF_SHARED, dev->name, dev); + if (unlikely(ret < 0)) { + pr_err("%s: ERROR: allocating the IRQ %d (error: %d)\n", + __func__, dev->irq, ret); + return ret; + } + +#ifdef CONFIG_STMMAC_TIMER + priv->tm = kmalloc(sizeof(struct stmmac_timer *), GFP_KERNEL); + if (unlikely(priv->tm == NULL)) { + pr_err("%s: ERROR: timer memory alloc failed \n", __func__); + return -ENOMEM; + } + priv->tm->freq = tmrate; + + /* Test if the HW timer can be actually used. + * In case of failure continue with no timer. */ + if (unlikely((stmmac_open_ext_timer(dev, priv->tm)) < 0)) { + pr_warning("stmmaceth: cannot attach the HW timer\n"); + tmrate = 0; + priv->tm->freq = 0; + priv->tm->timer_start = stmmac_no_timer_started; + priv->tm->timer_stop = stmmac_no_timer_stopped; + } +#endif + + /* Create and initialize the TX/RX descriptors chains. */ + priv->dma_tx_size = STMMAC_ALIGN(dma_txsize); + priv->dma_rx_size = STMMAC_ALIGN(dma_rxsize); + priv->dma_buf_sz = STMMAC_ALIGN(buf_sz); + init_dma_desc_rings(dev); + + /* DMA initialization and SW reset */ + if (unlikely(priv->mac_type->ops->dma_init(ioaddr, + priv->pbl, priv->dma_tx_phy, priv->dma_rx_phy) < 0)) { + + pr_err("%s: DMA initialization failed\n", __func__); + return -1; + } + + /* Copy the MAC addr into the HW */ + priv->mac_type->ops->set_umac_addr(ioaddr, dev->dev_addr, 0); + /* Initialize the MAC Core */ + priv->mac_type->ops->core_init(ioaddr); + + priv->shutdown = 0; + + /* Initialise the MMC (if present) to disable all interrupts. */ + writel(0xffffffff, ioaddr + MMC_HIGH_INTR_MASK); + writel(0xffffffff, ioaddr + MMC_LOW_INTR_MASK); + + /* Enable the MAC Rx/Tx */ + stmmac_mac_enable_rx(ioaddr); + stmmac_mac_enable_tx(ioaddr); + + /* Set the HW DMA mode and the COE */ + stmmac_dma_operation_mode(priv); + + /* Extra statistics */ + memset(&priv->xstats, 0, sizeof(struct stmmac_extra_stats)); + priv->xstats.threshold = tc; + + /* Start the ball rolling... */ + DBG(probe, DEBUG, "%s: DMA RX/TX processes started...\n", dev->name); + stmmac_dma_start_tx(ioaddr); + stmmac_dma_start_rx(ioaddr); + +#ifdef CONFIG_STMMAC_TIMER + priv->tm->timer_start(tmrate); +#endif + /* Dump DMA/MAC registers */ + if (netif_msg_hw(priv)) { + priv->mac_type->ops->dump_mac_regs(ioaddr); + priv->mac_type->ops->dump_dma_regs(ioaddr); + } + + if (priv->phydev) + phy_start(priv->phydev); + + napi_enable(&priv->napi); + skb_queue_head_init(&priv->rx_recycle); + netif_start_queue(dev); + return 0; +} + +/** + * stmmac_release - close entry point of the driver + * @dev : device pointer. + * Description: + * This is the stop entry point of the driver. + */ +static int stmmac_release(struct net_device *dev) +{ + struct stmmac_priv *priv = netdev_priv(dev); + + /* Stop and disconnect the PHY */ + if (priv->phydev) { + phy_stop(priv->phydev); + phy_disconnect(priv->phydev); + priv->phydev = NULL; + } + + netif_stop_queue(dev); + +#ifdef CONFIG_STMMAC_TIMER + /* Stop and release the timer */ + stmmac_close_ext_timer(); + if (priv->tm != NULL) + kfree(priv->tm); +#endif + napi_disable(&priv->napi); + skb_queue_purge(&priv->rx_recycle); + + /* Free the IRQ lines */ + free_irq(dev->irq, dev); + + /* Stop TX/RX DMA and clear the descriptors */ + stmmac_dma_stop_tx(dev->base_addr); + stmmac_dma_stop_rx(dev->base_addr); + + /* Release and free the Rx/Tx resources */ + free_dma_desc_resources(priv); + + /* Disable the MAC core */ + stmmac_mac_disable_tx(dev->base_addr); + stmmac_mac_disable_rx(dev->base_addr); + + netif_carrier_off(dev); + + return 0; +} + +/* + * To perform emulated hardware segmentation on skb. + */ +static int stmmac_sw_tso(struct stmmac_priv *priv, struct sk_buff *skb) +{ + struct sk_buff *segs, *curr_skb; + int gso_segs = skb_shinfo(skb)->gso_segs; + + /* Estimate the number of fragments in the worst case */ + if (unlikely(stmmac_tx_avail(priv) < gso_segs)) { + netif_stop_queue(priv->dev); + TX_DBG(KERN_ERR "%s: TSO BUG! Tx Ring full when queue awake\n", + __func__); + if (stmmac_tx_avail(priv) < gso_segs) + return NETDEV_TX_BUSY; + + netif_wake_queue(priv->dev); + } + TX_DBG("\tstmmac_sw_tso: segmenting: skb %p (len %d)\n", + skb, skb->len); + + segs = skb_gso_segment(skb, priv->dev->features & ~NETIF_F_TSO); + if (unlikely(IS_ERR(segs))) + goto sw_tso_end; + + do { + curr_skb = segs; + segs = segs->next; + TX_DBG("\t\tcurrent skb->len: %d, *curr %p," + "*next %p\n", curr_skb->len, curr_skb, segs); + curr_skb->next = NULL; + stmmac_xmit(curr_skb, priv->dev); + } while (segs); + +sw_tso_end: + dev_kfree_skb(skb); + + return NETDEV_TX_OK; +} + +static unsigned int stmmac_handle_jumbo_frames(struct sk_buff *skb, + struct net_device *dev, + int csum_insertion) +{ + struct stmmac_priv *priv = netdev_priv(dev); + unsigned int nopaged_len = skb_headlen(skb); + unsigned int txsize = priv->dma_tx_size; + unsigned int entry = priv->cur_tx % txsize; + struct dma_desc *desc = priv->dma_tx + entry; + + if (nopaged_len > BUF_SIZE_8KiB) { + + int buf2_size = nopaged_len - BUF_SIZE_8KiB; + + desc->des2 = dma_map_single(priv->device, skb->data, + BUF_SIZE_8KiB, DMA_TO_DEVICE); + desc->des3 = desc->des2 + BUF_SIZE_4KiB; + priv->mac_type->ops->prepare_tx_desc(desc, 1, BUF_SIZE_8KiB, + csum_insertion); + + entry = (++priv->cur_tx) % txsize; + desc = priv->dma_tx + entry; + + desc->des2 = dma_map_single(priv->device, + skb->data + BUF_SIZE_8KiB, + buf2_size, DMA_TO_DEVICE); + desc->des3 = desc->des2 + BUF_SIZE_4KiB; + priv->mac_type->ops->prepare_tx_desc(desc, 0, + buf2_size, csum_insertion); + priv->mac_type->ops->set_tx_owner(desc); + priv->tx_skbuff[entry] = NULL; + } else { + desc->des2 = dma_map_single(priv->device, skb->data, + nopaged_len, DMA_TO_DEVICE); + desc->des3 = desc->des2 + BUF_SIZE_4KiB; + priv->mac_type->ops->prepare_tx_desc(desc, 1, nopaged_len, + csum_insertion); + } + return entry; +} + +/** + * stmmac_xmit: + * @skb : the socket buffer + * @dev : device pointer + * Description : Tx entry point of the driver. + */ +static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct stmmac_priv *priv = netdev_priv(dev); + unsigned int txsize = priv->dma_tx_size; + unsigned int entry; + int i, csum_insertion = 0; + int nfrags = skb_shinfo(skb)->nr_frags; + struct dma_desc *desc, *first; + + if (unlikely(stmmac_tx_avail(priv) < nfrags + 1)) { + if (!netif_queue_stopped(dev)) { + netif_stop_queue(dev); + /* This is a hard error, log it. */ + pr_err("%s: BUG! Tx Ring full when queue awake\n", + __func__); + } + return NETDEV_TX_BUSY; + } + + entry = priv->cur_tx % txsize; + +#ifdef STMMAC_XMIT_DEBUG + if ((skb->len > ETH_FRAME_LEN) || nfrags) + pr_info("stmmac xmit:\n" + "\tskb addr %p - len: %d - nopaged_len: %d\n" + "\tn_frags: %d - ip_summed: %d - %s gso\n", + skb, skb->len, skb_headlen(skb), nfrags, skb->ip_summed, + !skb_is_gso(skb) ? "isn't" : "is"); +#endif + + if (unlikely(skb_is_gso(skb))) + return stmmac_sw_tso(priv, skb); + + if (likely((skb->ip_summed == CHECKSUM_PARTIAL))) { + if (likely(priv->tx_coe == NO_HW_CSUM)) + skb_checksum_help(skb); + else + csum_insertion = 1; + } + + desc = priv->dma_tx + entry; + first = desc; + +#ifdef STMMAC_XMIT_DEBUG + if ((nfrags > 0) || (skb->len > ETH_FRAME_LEN)) + pr_debug("stmmac xmit: skb len: %d, nopaged_len: %d,\n" + "\t\tn_frags: %d, ip_summed: %d\n", + skb->len, skb_headlen(skb), nfrags, skb->ip_summed); +#endif + priv->tx_skbuff[entry] = skb; + if (unlikely(skb->len >= BUF_SIZE_4KiB)) { + entry = stmmac_handle_jumbo_frames(skb, dev, csum_insertion); + desc = priv->dma_tx + entry; + } else { + unsigned int nopaged_len = skb_headlen(skb); + desc->des2 = dma_map_single(priv->device, skb->data, + nopaged_len, DMA_TO_DEVICE); + priv->mac_type->ops->prepare_tx_desc(desc, 1, nopaged_len, + csum_insertion); + } + + for (i = 0; i < nfrags; i++) { + skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; + int len = frag->size; + + entry = (++priv->cur_tx) % txsize; + desc = priv->dma_tx + entry; + + TX_DBG("\t[entry %d] segment len: %d\n", entry, len); + desc->des2 = dma_map_page(priv->device, frag->page, + frag->page_offset, + len, DMA_TO_DEVICE); + priv->tx_skbuff[entry] = NULL; + priv->mac_type->ops->prepare_tx_desc(desc, 0, len, + csum_insertion); + priv->mac_type->ops->set_tx_owner(desc); + } + + /* Interrupt on completition only for the latest segment */ + priv->mac_type->ops->close_tx_desc(desc); +#ifdef CONFIG_STMMAC_TIMER + /* Clean IC while using timers */ + priv->mac_type->ops->clear_tx_ic(desc); +#endif + /* To avoid raise condition */ + priv->mac_type->ops->set_tx_owner(first); + + priv->cur_tx++; + +#ifdef STMMAC_XMIT_DEBUG + if (netif_msg_pktdata(priv)) { + pr_info("stmmac xmit: current=%d, dirty=%d, entry=%d, " + "first=%p, nfrags=%d\n", + (priv->cur_tx % txsize), (priv->dirty_tx % txsize), + entry, first, nfrags); + display_ring(priv->dma_tx, txsize); + pr_info(">>> frame to be transmitted: "); + print_pkt(skb->data, skb->len); + } +#endif + if (unlikely(stmmac_tx_avail(priv) <= (MAX_SKB_FRAGS + 1))) { + TX_DBG("%s: stop transmitted packets\n", __func__); + netif_stop_queue(dev); + } + + dev->stats.tx_bytes += skb->len; + + /* CSR1 enables the transmit DMA to check for new descriptor */ + writel(1, dev->base_addr + DMA_XMT_POLL_DEMAND); + + return NETDEV_TX_OK; +} + +static inline void stmmac_rx_refill(struct stmmac_priv *priv) +{ + unsigned int rxsize = priv->dma_rx_size; + int bfsize = priv->dma_buf_sz; + struct dma_desc *p = priv->dma_rx; + + for (; priv->cur_rx - priv->dirty_rx > 0; priv->dirty_rx++) { + unsigned int entry = priv->dirty_rx % rxsize; + if (likely(priv->rx_skbuff[entry] == NULL)) { + struct sk_buff *skb; + + skb = __skb_dequeue(&priv->rx_recycle); + if (skb == NULL) + skb = netdev_alloc_skb_ip_align(priv->dev, + bfsize); + + if (unlikely(skb == NULL)) + break; + + priv->rx_skbuff[entry] = skb; + priv->rx_skbuff_dma[entry] = + dma_map_single(priv->device, skb->data, bfsize, + DMA_FROM_DEVICE); + + (p + entry)->des2 = priv->rx_skbuff_dma[entry]; + if (unlikely(priv->is_gmac)) { + if (bfsize >= BUF_SIZE_8KiB) + (p + entry)->des3 = + (p + entry)->des2 + BUF_SIZE_8KiB; + } + RX_DBG(KERN_INFO "\trefill entry #%d\n", entry); + } + priv->mac_type->ops->set_rx_owner(p + entry); + } + return; +} + +static int stmmac_rx(struct stmmac_priv *priv, int limit) +{ + unsigned int rxsize = priv->dma_rx_size; + unsigned int entry = priv->cur_rx % rxsize; + unsigned int next_entry; + unsigned int count = 0; + struct dma_desc *p = priv->dma_rx + entry; + struct dma_desc *p_next; + +#ifdef STMMAC_RX_DEBUG + if (netif_msg_hw(priv)) { + pr_debug(">>> stmmac_rx: descriptor ring:\n"); + display_ring(priv->dma_rx, rxsize); + } +#endif + count = 0; + while (!priv->mac_type->ops->get_rx_owner(p)) { + int status; + + if (count >= limit) + break; + + count++; + + next_entry = (++priv->cur_rx) % rxsize; + p_next = priv->dma_rx + next_entry; + prefetch(p_next); + + /* read the status of the incoming frame */ + status = (priv->mac_type->ops->rx_status(&priv->dev->stats, + &priv->xstats, p)); + if (unlikely(status == discard_frame)) + priv->dev->stats.rx_errors++; + else { + struct sk_buff *skb; + /* Length should omit the CRC */ + int frame_len = + priv->mac_type->ops->get_rx_frame_len(p) - 4; + +#ifdef STMMAC_RX_DEBUG + if (frame_len > ETH_FRAME_LEN) + pr_debug("\tRX frame size %d, COE status: %d\n", + frame_len, status); + + if (netif_msg_hw(priv)) + pr_debug("\tdesc: %p [entry %d] buff=0x%x\n", + p, entry, p->des2); +#endif + skb = priv->rx_skbuff[entry]; + if (unlikely(!skb)) { + pr_err("%s: Inconsistent Rx descriptor chain\n", + priv->dev->name); + priv->dev->stats.rx_dropped++; + break; + } + prefetch(skb->data - NET_IP_ALIGN); + priv->rx_skbuff[entry] = NULL; + + skb_put(skb, frame_len); + dma_unmap_single(priv->device, + priv->rx_skbuff_dma[entry], + priv->dma_buf_sz, DMA_FROM_DEVICE); +#ifdef STMMAC_RX_DEBUG + if (netif_msg_pktdata(priv)) { + pr_info(" frame received (%dbytes)", frame_len); + print_pkt(skb->data, frame_len); + } +#endif + skb->protocol = eth_type_trans(skb, priv->dev); + + if (unlikely(status == csum_none)) { + /* always for the old mac 10/100 */ + skb->ip_summed = CHECKSUM_NONE; + netif_receive_skb(skb); + } else { + skb->ip_summed = CHECKSUM_UNNECESSARY; + napi_gro_receive(&priv->napi, skb); + } + + priv->dev->stats.rx_packets++; + priv->dev->stats.rx_bytes += frame_len; + priv->dev->last_rx = jiffies; + } + entry = next_entry; + p = p_next; /* use prefetched values */ + } + + stmmac_rx_refill(priv); + + priv->xstats.rx_pkt_n += count; + + return count; +} + +/** + * stmmac_poll - stmmac poll method (NAPI) + * @napi : pointer to the napi structure. + * @budget : maximum number of packets that the current CPU can receive from + * all interfaces. + * Description : + * This function implements the the reception process. + * Also it runs the TX completion thread + */ +static int stmmac_poll(struct napi_struct *napi, int budget) +{ + struct stmmac_priv *priv = container_of(napi, struct stmmac_priv, napi); + int work_done = 0; + + priv->xstats.poll_n++; + stmmac_tx(priv); + work_done = stmmac_rx(priv, budget); + + if (work_done < budget) { + napi_complete(napi); + stmmac_enable_irq(priv); + } + return work_done; +} + +/** + * stmmac_tx_timeout + * @dev : Pointer to net device structure + * Description: this function is called when a packet transmission fails to + * complete within a reasonable tmrate. The driver will mark the error in the + * netdev structure and arrange for the device to be reset to a sane state + * in order to transmit a new packet. + */ +static void stmmac_tx_timeout(struct net_device *dev) +{ + struct stmmac_priv *priv = netdev_priv(dev); + + /* Clear Tx resources and restart transmitting again */ + stmmac_tx_err(priv); + return; +} + +/* Configuration changes (passed on by ifconfig) */ +static int stmmac_config(struct net_device *dev, struct ifmap *map) +{ + if (dev->flags & IFF_UP) /* can't act on a running interface */ + return -EBUSY; + + /* Don't allow changing the I/O address */ + if (map->base_addr != dev->base_addr) { + pr_warning("%s: can't change I/O address\n", dev->name); + return -EOPNOTSUPP; + } + + /* Don't allow changing the IRQ */ + if (map->irq != dev->irq) { + pr_warning("%s: can't change IRQ number %d\n", + dev->name, dev->irq); + return -EOPNOTSUPP; + } + + /* ignore other fields */ + return 0; +} + +/** + * stmmac_multicast_list - entry point for multicast addressing + * @dev : pointer to the device structure + * Description: + * This function is a driver entry point which gets called by the kernel + * whenever multicast addresses must be enabled/disabled. + * Return value: + * void. + */ +static void stmmac_multicast_list(struct net_device *dev) +{ + struct stmmac_priv *priv = netdev_priv(dev); + + spin_lock(&priv->lock); + priv->mac_type->ops->set_filter(dev); + spin_unlock(&priv->lock); + return; +} + +/** + * stmmac_change_mtu - entry point to change MTU size for the device. + * @dev : device pointer. + * @new_mtu : the new MTU size for the device. + * Description: the Maximum Transfer Unit (MTU) is used by the network layer + * to drive packet transmission. Ethernet has an MTU of 1500 octets + * (ETH_DATA_LEN). This value can be changed with ifconfig. + * Return value: + * 0 on success and an appropriate (-)ve integer as defined in errno.h + * file on failure. + */ +static int stmmac_change_mtu(struct net_device *dev, int new_mtu) +{ + struct stmmac_priv *priv = netdev_priv(dev); + int max_mtu; + + if (netif_running(dev)) { + pr_err("%s: must be stopped to change its MTU\n", dev->name); + return -EBUSY; + } + + if (priv->is_gmac) + max_mtu = JUMBO_LEN; + else + max_mtu = ETH_DATA_LEN; + + if ((new_mtu < 46) || (new_mtu > max_mtu)) { + pr_err("%s: invalid MTU, max MTU is: %d\n", dev->name, max_mtu); + return -EINVAL; + } + + dev->mtu = new_mtu; + + return 0; +} + +static irqreturn_t stmmac_interrupt(int irq, void *dev_id) +{ + struct net_device *dev = (struct net_device *)dev_id; + struct stmmac_priv *priv = netdev_priv(dev); + + if (unlikely(!dev)) { + pr_err("%s: invalid dev pointer\n", __func__); + return IRQ_NONE; + } + + if (priv->is_gmac) { + unsigned long ioaddr = dev->base_addr; + /* To handle GMAC own interrupts */ + priv->mac_type->ops->host_irq_status(ioaddr); + } + stmmac_dma_interrupt(dev); + + return IRQ_HANDLED; +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +/* Polling receive - used by NETCONSOLE and other diagnostic tools + * to allow network I/O with interrupts disabled. */ +static void stmmac_poll_controller(struct net_device *dev) +{ + disable_irq(dev->irq); + stmmac_interrupt(dev->irq, dev); + enable_irq(dev->irq); +} +#endif + +/** + * stmmac_ioctl - Entry point for the Ioctl + * @dev: Device pointer. + * @rq: An IOCTL specefic structure, that can contain a pointer to + * a proprietary structure used to pass information to the driver. + * @cmd: IOCTL command + * Description: + * Currently there are no special functionality supported in IOCTL, just the + * phy_mii_ioctl(...) can be invoked. + */ +static int stmmac_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) +{ + struct stmmac_priv *priv = netdev_priv(dev); + int ret = -EOPNOTSUPP; + + if (!netif_running(dev)) + return -EINVAL; + + switch (cmd) { + case SIOCGMIIPHY: + case SIOCGMIIREG: + case SIOCSMIIREG: + if (!priv->phydev) + return -EINVAL; + + spin_lock(&priv->lock); + ret = phy_mii_ioctl(priv->phydev, if_mii(rq), cmd); + spin_unlock(&priv->lock); + default: + break; + } + return ret; +} + +#ifdef STMMAC_VLAN_TAG_USED +static void stmmac_vlan_rx_register(struct net_device *dev, + struct vlan_group *grp) +{ + struct stmmac_priv *priv = netdev_priv(dev); + + DBG(probe, INFO, "%s: Setting vlgrp to %p\n", dev->name, grp); + + spin_lock(&priv->lock); + priv->vlgrp = grp; + spin_unlock(&priv->lock); + + return; +} +#endif + +static const struct net_device_ops stmmac_netdev_ops = { + .ndo_open = stmmac_open, + .ndo_start_xmit = stmmac_xmit, + .ndo_stop = stmmac_release, + .ndo_change_mtu = stmmac_change_mtu, + .ndo_set_multicast_list = stmmac_multicast_list, + .ndo_tx_timeout = stmmac_tx_timeout, + .ndo_do_ioctl = stmmac_ioctl, + .ndo_set_config = stmmac_config, +#ifdef STMMAC_VLAN_TAG_USED + .ndo_vlan_rx_register = stmmac_vlan_rx_register, +#endif +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = stmmac_poll_controller, +#endif + .ndo_set_mac_address = eth_mac_addr, +}; + +/** + * stmmac_probe - Initialization of the adapter . + * @dev : device pointer + * Description: The function initializes the network device structure for + * the STMMAC driver. It also calls the low level routines + * in order to init the HW (i.e. the DMA engine) + */ +static int stmmac_probe(struct net_device *dev) +{ + int ret = 0; + struct stmmac_priv *priv = netdev_priv(dev); + + ether_setup(dev); + + dev->netdev_ops = &stmmac_netdev_ops; + stmmac_set_ethtool_ops(dev); + + dev->features |= (NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_HIGHDMA); + dev->watchdog_timeo = msecs_to_jiffies(watchdog); +#ifdef STMMAC_VLAN_TAG_USED + /* Both mac100 and gmac support receive VLAN tag detection */ + dev->features |= NETIF_F_HW_VLAN_RX; +#endif + priv->msg_enable = netif_msg_init(debug, default_msg_level); + + if (priv->is_gmac) + priv->rx_csum = 1; + + if (flow_ctrl) + priv->flow_ctrl = FLOW_AUTO; /* RX/TX pause on */ + + priv->pause = pause; + netif_napi_add(dev, &priv->napi, stmmac_poll, 64); + + /* Get the MAC address */ + priv->mac_type->ops->get_umac_addr(dev->base_addr, dev->dev_addr, 0); + + if (!is_valid_ether_addr(dev->dev_addr)) + pr_warning("\tno valid MAC address;" + "please, use ifconfig or nwhwconfig!\n"); + + ret = register_netdev(dev); + if (ret) { + pr_err("%s: ERROR %i registering the device\n", + __func__, ret); + return -ENODEV; + } + + DBG(probe, DEBUG, "%s: Scatter/Gather: %s - HW checksums: %s\n", + dev->name, (dev->features & NETIF_F_SG) ? "on" : "off", + (dev->features & NETIF_F_HW_CSUM) ? "on" : "off"); + + spin_lock_init(&priv->lock); + + return ret; +} + +/** + * stmmac_mac_device_setup + * @dev : device pointer + * Description: select and initialise the mac device (mac100 or Gmac). + */ +static int stmmac_mac_device_setup(struct net_device *dev) +{ + struct stmmac_priv *priv = netdev_priv(dev); + unsigned long ioaddr = dev->base_addr; + + struct mac_device_info *device; + + if (priv->is_gmac) + device = gmac_setup(ioaddr); + else + device = mac100_setup(ioaddr); + + if (!device) + return -ENOMEM; + + priv->mac_type = device; + + priv->wolenabled = priv->mac_type->hw.pmt; /* PMT supported */ + if (priv->wolenabled == PMT_SUPPORTED) + priv->wolopts = WAKE_MAGIC; /* Magic Frame */ + + return 0; +} + +static int stmmacphy_dvr_probe(struct platform_device *pdev) +{ + struct plat_stmmacphy_data *plat_dat; + plat_dat = (struct plat_stmmacphy_data *)((pdev->dev).platform_data); + + pr_debug("stmmacphy_dvr_probe: added phy for bus %d\n", + plat_dat->bus_id); + + return 0; +} + +static int stmmacphy_dvr_remove(struct platform_device *pdev) +{ + return 0; +} + +static struct platform_driver stmmacphy_driver = { + .driver = { + .name = PHY_RESOURCE_NAME, + }, + .probe = stmmacphy_dvr_probe, + .remove = stmmacphy_dvr_remove, +}; + +/** + * stmmac_associate_phy + * @dev: pointer to device structure + * @data: points to the private structure. + * Description: Scans through all the PHYs we have registered and checks if + * any are associated with our MAC. If so, then just fill in + * the blanks in our local context structure + */ +static int stmmac_associate_phy(struct device *dev, void *data) +{ + struct stmmac_priv *priv = (struct stmmac_priv *)data; + struct plat_stmmacphy_data *plat_dat; + + plat_dat = (struct plat_stmmacphy_data *)(dev->platform_data); + + DBG(probe, DEBUG, "%s: checking phy for bus %d\n", __func__, + plat_dat->bus_id); + + /* Check that this phy is for the MAC being initialised */ + if (priv->bus_id != plat_dat->bus_id) + return 0; + + /* OK, this PHY is connected to the MAC. + Go ahead and get the parameters */ + DBG(probe, DEBUG, "%s: OK. Found PHY config\n", __func__); + priv->phy_irq = + platform_get_irq_byname(to_platform_device(dev), "phyirq"); + DBG(probe, DEBUG, "%s: PHY irq on bus %d is %d\n", __func__, + plat_dat->bus_id, priv->phy_irq); + + /* Override with kernel parameters if supplied XXX CRS XXX + * this needs to have multiple instances */ + if ((phyaddr >= 0) && (phyaddr <= 31)) + plat_dat->phy_addr = phyaddr; + + priv->phy_addr = plat_dat->phy_addr; + priv->phy_mask = plat_dat->phy_mask; + priv->phy_interface = plat_dat->interface; + priv->phy_reset = plat_dat->phy_reset; + + DBG(probe, DEBUG, "%s: exiting\n", __func__); + return 1; /* forces exit of driver_for_each_device() */ +} + +/** + * stmmac_dvr_probe + * @pdev: platform device pointer + * Description: the driver is initialized through platform_device. + */ +static int stmmac_dvr_probe(struct platform_device *pdev) +{ + int ret = 0; + struct resource *res; + unsigned int *addr = NULL; + struct net_device *ndev = NULL; + struct stmmac_priv *priv; + struct plat_stmmacenet_data *plat_dat; + + pr_info("STMMAC driver:\n\tplatform registration... "); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + ret = -ENODEV; + goto out; + } + pr_info("done!\n"); + + if (!request_mem_region(res->start, (res->end - res->start), + pdev->name)) { + pr_err("%s: ERROR: memory allocation failed" + "cannot get the I/O addr 0x%x\n", + __func__, (unsigned int)res->start); + ret = -EBUSY; + goto out; + } + + addr = ioremap(res->start, (res->end - res->start)); + if (!addr) { + pr_err("%s: ERROR: memory mapping failed \n", __func__); + ret = -ENOMEM; + goto out; + } + + ndev = alloc_etherdev(sizeof(struct stmmac_priv)); + if (!ndev) { + pr_err("%s: ERROR: allocating the device\n", __func__); + ret = -ENOMEM; + goto out; + } + + SET_NETDEV_DEV(ndev, &pdev->dev); + + /* Get the MAC information */ + ndev->irq = platform_get_irq_byname(pdev, "macirq"); + if (ndev->irq == -ENXIO) { + pr_err("%s: ERROR: MAC IRQ configuration " + "information not found\n", __func__); + ret = -ENODEV; + goto out; + } + + priv = netdev_priv(ndev); + priv->device = &(pdev->dev); + priv->dev = ndev; + plat_dat = (struct plat_stmmacenet_data *)((pdev->dev).platform_data); + priv->bus_id = plat_dat->bus_id; + priv->pbl = plat_dat->pbl; /* TLI */ + priv->is_gmac = plat_dat->has_gmac; /* GMAC is on board */ + + platform_set_drvdata(pdev, ndev); + + /* Set the I/O base addr */ + ndev->base_addr = (unsigned long)addr; + + /* MAC HW revice detection */ + ret = stmmac_mac_device_setup(ndev); + if (ret < 0) + goto out; + + /* Network Device Registration */ + ret = stmmac_probe(ndev); + if (ret < 0) + goto out; + + /* associate a PHY - it is provided by another platform bus */ + if (!driver_for_each_device + (&(stmmacphy_driver.driver), NULL, (void *)priv, + stmmac_associate_phy)) { + pr_err("No PHY device is associated with this MAC!\n"); + ret = -ENODEV; + goto out; + } + + priv->fix_mac_speed = plat_dat->fix_mac_speed; + priv->bsp_priv = plat_dat->bsp_priv; + + pr_info("\t%s - (dev. name: %s - id: %d, IRQ #%d\n" + "\tIO base addr: 0x%08x)\n", ndev->name, pdev->name, + pdev->id, ndev->irq, (unsigned int)addr); + + /* MDIO bus Registration */ + pr_debug("\tMDIO bus (id: %d)...", priv->bus_id); + ret = stmmac_mdio_register(ndev); + if (ret < 0) + goto out; + pr_debug("registered!\n"); + +out: + if (ret < 0) { + platform_set_drvdata(pdev, NULL); + release_mem_region(res->start, (res->end - res->start)); + if (addr != NULL) + iounmap(addr); + } + + return ret; +} + +/** + * stmmac_dvr_remove + * @pdev: platform device pointer + * Description: this function resets the TX/RX processes, disables the MAC RX/TX + * changes the link status, releases the DMA descriptor rings, + * unregisters the MDIO bus and unmaps the allocated memory. + */ +static int stmmac_dvr_remove(struct platform_device *pdev) +{ + struct net_device *ndev = platform_get_drvdata(pdev); + struct resource *res; + + pr_info("%s:\n\tremoving driver", __func__); + + stmmac_dma_stop_rx(ndev->base_addr); + stmmac_dma_stop_tx(ndev->base_addr); + + stmmac_mac_disable_rx(ndev->base_addr); + stmmac_mac_disable_tx(ndev->base_addr); + + netif_carrier_off(ndev); + + stmmac_mdio_unregister(ndev); + + platform_set_drvdata(pdev, NULL); + unregister_netdev(ndev); + + iounmap((void *)ndev->base_addr); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(res->start, (res->end - res->start)); + + free_netdev(ndev); + + return 0; +} + +#ifdef CONFIG_PM +static int stmmac_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct net_device *dev = platform_get_drvdata(pdev); + struct stmmac_priv *priv = netdev_priv(dev); + int dis_ic = 0; + + if (!dev || !netif_running(dev)) + return 0; + + spin_lock(&priv->lock); + + if (state.event == PM_EVENT_SUSPEND) { + netif_device_detach(dev); + netif_stop_queue(dev); + if (priv->phydev) + phy_stop(priv->phydev); + +#ifdef CONFIG_STMMAC_TIMER + priv->tm->timer_stop(); + dis_ic = 1; +#endif + napi_disable(&priv->napi); + + /* Stop TX/RX DMA */ + stmmac_dma_stop_tx(dev->base_addr); + stmmac_dma_stop_rx(dev->base_addr); + /* Clear the Rx/Tx descriptors */ + priv->mac_type->ops->init_rx_desc(priv->dma_rx, + priv->dma_rx_size, dis_ic); + priv->mac_type->ops->init_tx_desc(priv->dma_tx, + priv->dma_tx_size); + + stmmac_mac_disable_tx(dev->base_addr); + + if (device_may_wakeup(&(pdev->dev))) { + /* Enable Power down mode by programming the PMT regs */ + if (priv->wolenabled == PMT_SUPPORTED) + priv->mac_type->ops->pmt(dev->base_addr, + priv->wolopts); + } else { + stmmac_mac_disable_rx(dev->base_addr); + } + } else { + priv->shutdown = 1; + /* Although this can appear slightly redundant it actually + * makes fast the standby operation and guarantees the driver + * working if hibernation is on media. */ + stmmac_release(dev); + } + + spin_unlock(&priv->lock); + return 0; +} + +static int stmmac_resume(struct platform_device *pdev) +{ + struct net_device *dev = platform_get_drvdata(pdev); + struct stmmac_priv *priv = netdev_priv(dev); + unsigned long ioaddr = dev->base_addr; + + if (!netif_running(dev)) + return 0; + + spin_lock(&priv->lock); + + if (priv->shutdown) { + /* Re-open the interface and re-init the MAC/DMA + and the rings. */ + stmmac_open(dev); + goto out_resume; + } + + /* Power Down bit, into the PM register, is cleared + * automatically as soon as a magic packet or a Wake-up frame + * is received. Anyway, it's better to manually clear + * this bit because it can generate problems while resuming + * from another devices (e.g. serial console). */ + if (device_may_wakeup(&(pdev->dev))) + if (priv->wolenabled == PMT_SUPPORTED) + priv->mac_type->ops->pmt(dev->base_addr, 0); + + netif_device_attach(dev); + + /* Enable the MAC and DMA */ + stmmac_mac_enable_rx(ioaddr); + stmmac_mac_enable_tx(ioaddr); + stmmac_dma_start_tx(ioaddr); + stmmac_dma_start_rx(ioaddr); + +#ifdef CONFIG_STMMAC_TIMER + priv->tm->timer_start(tmrate); +#endif + napi_enable(&priv->napi); + + if (priv->phydev) + phy_start(priv->phydev); + + netif_start_queue(dev); + +out_resume: + spin_unlock(&priv->lock); + return 0; +} +#endif + +static struct platform_driver stmmac_driver = { + .driver = { + .name = STMMAC_RESOURCE_NAME, + }, + .probe = stmmac_dvr_probe, + .remove = stmmac_dvr_remove, +#ifdef CONFIG_PM + .suspend = stmmac_suspend, + .resume = stmmac_resume, +#endif + +}; + +/** + * stmmac_init_module - Entry point for the driver + * Description: This function is the entry point for the driver. + */ +static int __init stmmac_init_module(void) +{ + int ret; + + if (platform_driver_register(&stmmacphy_driver)) { + pr_err("No PHY devices registered!\n"); + return -ENODEV; + } + + ret = platform_driver_register(&stmmac_driver); + return ret; +} + +/** + * stmmac_cleanup_module - Cleanup routine for the driver + * Description: This function is the cleanup routine for the driver. + */ +static void __exit stmmac_cleanup_module(void) +{ + platform_driver_unregister(&stmmacphy_driver); + platform_driver_unregister(&stmmac_driver); +} + +#ifndef MODULE +static int __init stmmac_cmdline_opt(char *str) +{ + char *opt; + + if (!str || !*str) + return -EINVAL; + while ((opt = strsep(&str, ",")) != NULL) { + if (!strncmp(opt, "debug:", 6)) + strict_strtoul(opt + 6, 0, (unsigned long *)&debug); + else if (!strncmp(opt, "phyaddr:", 8)) + strict_strtoul(opt + 8, 0, (unsigned long *)&phyaddr); + else if (!strncmp(opt, "dma_txsize:", 11)) + strict_strtoul(opt + 11, 0, + (unsigned long *)&dma_txsize); + else if (!strncmp(opt, "dma_rxsize:", 11)) + strict_strtoul(opt + 11, 0, + (unsigned long *)&dma_rxsize); + else if (!strncmp(opt, "buf_sz:", 7)) + strict_strtoul(opt + 7, 0, (unsigned long *)&buf_sz); + else if (!strncmp(opt, "tc:", 3)) + strict_strtoul(opt + 3, 0, (unsigned long *)&tc); + else if (!strncmp(opt, "tx_coe:", 7)) + strict_strtoul(opt + 7, 0, (unsigned long *)&tx_coe); + else if (!strncmp(opt, "watchdog:", 9)) + strict_strtoul(opt + 9, 0, (unsigned long *)&watchdog); + else if (!strncmp(opt, "flow_ctrl:", 10)) + strict_strtoul(opt + 10, 0, + (unsigned long *)&flow_ctrl); + else if (!strncmp(opt, "pause:", 6)) + strict_strtoul(opt + 6, 0, (unsigned long *)&pause); +#ifdef CONFIG_STMMAC_TIMER + else if (!strncmp(opt, "tmrate:", 7)) + strict_strtoul(opt + 7, 0, (unsigned long *)&tmrate); +#endif + } + return 0; +} + +__setup("stmmaceth=", stmmac_cmdline_opt); +#endif + +module_init(stmmac_init_module); +module_exit(stmmac_cleanup_module); + +MODULE_DESCRIPTION("STMMAC 10/100/1000 Ethernet driver"); +MODULE_AUTHOR("Giuseppe Cavallaro <peppe.cavallaro@st.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/stmmac/stmmac_mdio.c b/drivers/net/stmmac/stmmac_mdio.c new file mode 100644 index 000000000000..8498552a22fc --- /dev/null +++ b/drivers/net/stmmac/stmmac_mdio.c @@ -0,0 +1,217 @@ +/******************************************************************************* + STMMAC Ethernet Driver -- MDIO bus implementation + Provides Bus interface for MII registers + + Copyright (C) 2007-2009 STMicroelectronics Ltd + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Author: Carl Shaw <carl.shaw@st.com> + Maintainer: Giuseppe Cavallaro <peppe.cavallaro@st.com> +*******************************************************************************/ + +#include <linux/netdevice.h> +#include <linux/mii.h> +#include <linux/phy.h> + +#include "stmmac.h" + +#define MII_BUSY 0x00000001 +#define MII_WRITE 0x00000002 + +/** + * stmmac_mdio_read + * @bus: points to the mii_bus structure + * @phyaddr: MII addr reg bits 15-11 + * @phyreg: MII addr reg bits 10-6 + * Description: it reads data from the MII register from within the phy device. + * For the 7111 GMAC, we must set the bit 0 in the MII address register while + * accessing the PHY registers. + * Fortunately, it seems this has no drawback for the 7109 MAC. + */ +static int stmmac_mdio_read(struct mii_bus *bus, int phyaddr, int phyreg) +{ + struct net_device *ndev = bus->priv; + struct stmmac_priv *priv = netdev_priv(ndev); + unsigned long ioaddr = ndev->base_addr; + unsigned int mii_address = priv->mac_type->hw.mii.addr; + unsigned int mii_data = priv->mac_type->hw.mii.data; + + int data; + u16 regValue = (((phyaddr << 11) & (0x0000F800)) | + ((phyreg << 6) & (0x000007C0))); + regValue |= MII_BUSY; /* in case of GMAC */ + + do {} while (((readl(ioaddr + mii_address)) & MII_BUSY) == 1); + writel(regValue, ioaddr + mii_address); + do {} while (((readl(ioaddr + mii_address)) & MII_BUSY) == 1); + + /* Read the data from the MII data register */ + data = (int)readl(ioaddr + mii_data); + + return data; +} + +/** + * stmmac_mdio_write + * @bus: points to the mii_bus structure + * @phyaddr: MII addr reg bits 15-11 + * @phyreg: MII addr reg bits 10-6 + * @phydata: phy data + * Description: it writes the data into the MII register from within the device. + */ +static int stmmac_mdio_write(struct mii_bus *bus, int phyaddr, int phyreg, + u16 phydata) +{ + struct net_device *ndev = bus->priv; + struct stmmac_priv *priv = netdev_priv(ndev); + unsigned long ioaddr = ndev->base_addr; + unsigned int mii_address = priv->mac_type->hw.mii.addr; + unsigned int mii_data = priv->mac_type->hw.mii.data; + + u16 value = + (((phyaddr << 11) & (0x0000F800)) | ((phyreg << 6) & (0x000007C0))) + | MII_WRITE; + + value |= MII_BUSY; + + /* Wait until any existing MII operation is complete */ + do {} while (((readl(ioaddr + mii_address)) & MII_BUSY) == 1); + + /* Set the MII address register to write */ + writel(phydata, ioaddr + mii_data); + writel(value, ioaddr + mii_address); + + /* Wait until any existing MII operation is complete */ + do {} while (((readl(ioaddr + mii_address)) & MII_BUSY) == 1); + + return 0; +} + +/** + * stmmac_mdio_reset + * @bus: points to the mii_bus structure + * Description: reset the MII bus + */ +static int stmmac_mdio_reset(struct mii_bus *bus) +{ + struct net_device *ndev = bus->priv; + struct stmmac_priv *priv = netdev_priv(ndev); + unsigned long ioaddr = ndev->base_addr; + unsigned int mii_address = priv->mac_type->hw.mii.addr; + + if (priv->phy_reset) { + pr_debug("stmmac_mdio_reset: calling phy_reset\n"); + priv->phy_reset(priv->bsp_priv); + } + + /* This is a workaround for problems with the STE101P PHY. + * It doesn't complete its reset until at least one clock cycle + * on MDC, so perform a dummy mdio read. + */ + writel(0, ioaddr + mii_address); + + return 0; +} + +/** + * stmmac_mdio_register + * @ndev: net device structure + * Description: it registers the MII bus + */ +int stmmac_mdio_register(struct net_device *ndev) +{ + int err = 0; + struct mii_bus *new_bus; + int *irqlist; + struct stmmac_priv *priv = netdev_priv(ndev); + int addr, found; + + new_bus = mdiobus_alloc(); + if (new_bus == NULL) + return -ENOMEM; + + irqlist = kzalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL); + if (irqlist == NULL) { + err = -ENOMEM; + goto irqlist_alloc_fail; + } + + /* Assign IRQ to phy at address phy_addr */ + if (priv->phy_addr != -1) + irqlist[priv->phy_addr] = priv->phy_irq; + + new_bus->name = "STMMAC MII Bus"; + new_bus->read = &stmmac_mdio_read; + new_bus->write = &stmmac_mdio_write; + new_bus->reset = &stmmac_mdio_reset; + snprintf(new_bus->id, MII_BUS_ID_SIZE, "%x", priv->bus_id); + new_bus->priv = ndev; + new_bus->irq = irqlist; + new_bus->phy_mask = priv->phy_mask; + new_bus->parent = priv->device; + err = mdiobus_register(new_bus); + if (err != 0) { + pr_err("%s: Cannot register as MDIO bus\n", new_bus->name); + goto bus_register_fail; + } + + priv->mii = new_bus; + + found = 0; + for (addr = 0; addr < 32; addr++) { + struct phy_device *phydev = new_bus->phy_map[addr]; + if (phydev) { + if (priv->phy_addr == -1) { + priv->phy_addr = addr; + phydev->irq = priv->phy_irq; + irqlist[addr] = priv->phy_irq; + } + pr_info("%s: PHY ID %08x at %d IRQ %d (%s)%s\n", + ndev->name, phydev->phy_id, addr, + phydev->irq, dev_name(&phydev->dev), + (addr == priv->phy_addr) ? " active" : ""); + found = 1; + } + } + + if (!found) + pr_warning("%s: No PHY found\n", ndev->name); + + return 0; +bus_register_fail: + kfree(irqlist); +irqlist_alloc_fail: + kfree(new_bus); + return err; +} + +/** + * stmmac_mdio_unregister + * @ndev: net device structure + * Description: it unregisters the MII bus + */ +int stmmac_mdio_unregister(struct net_device *ndev) +{ + struct stmmac_priv *priv = netdev_priv(ndev); + + mdiobus_unregister(priv->mii); + priv->mii->priv = NULL; + kfree(priv->mii); + + return 0; +} diff --git a/drivers/net/stmmac/stmmac_timer.c b/drivers/net/stmmac/stmmac_timer.c new file mode 100644 index 000000000000..b838c6582077 --- /dev/null +++ b/drivers/net/stmmac/stmmac_timer.c @@ -0,0 +1,140 @@ +/******************************************************************************* + STMMAC external timer support. + + Copyright (C) 2007-2009 STMicroelectronics Ltd + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> +*******************************************************************************/ + +#include <linux/kernel.h> +#include <linux/etherdevice.h> +#include "stmmac_timer.h" + +static void stmmac_timer_handler(void *data) +{ + struct net_device *dev = (struct net_device *)data; + + stmmac_schedule(dev); + + return; +} + +#define STMMAC_TIMER_MSG(timer, freq) \ +printk(KERN_INFO "stmmac_timer: %s Timer ON (freq %dHz)\n", timer, freq); + +#if defined(CONFIG_STMMAC_RTC_TIMER) +#include <linux/rtc.h> +static struct rtc_device *stmmac_rtc; +static rtc_task_t stmmac_task; + +static void stmmac_rtc_start(unsigned int new_freq) +{ + rtc_irq_set_freq(stmmac_rtc, &stmmac_task, new_freq); + rtc_irq_set_state(stmmac_rtc, &stmmac_task, 1); + return; +} + +static void stmmac_rtc_stop(void) +{ + rtc_irq_set_state(stmmac_rtc, &stmmac_task, 0); + return; +} + +int stmmac_open_ext_timer(struct net_device *dev, struct stmmac_timer *tm) +{ + stmmac_task.private_data = dev; + stmmac_task.func = stmmac_timer_handler; + + stmmac_rtc = rtc_class_open(CONFIG_RTC_HCTOSYS_DEVICE); + if (stmmac_rtc == NULL) { + pr_error("open rtc device failed\n"); + return -ENODEV; + } + + rtc_irq_register(stmmac_rtc, &stmmac_task); + + /* Periodic mode is not supported */ + if ((rtc_irq_set_freq(stmmac_rtc, &stmmac_task, tm->freq) < 0)) { + pr_error("set periodic failed\n"); + rtc_irq_unregister(stmmac_rtc, &stmmac_task); + rtc_class_close(stmmac_rtc); + return -1; + } + + STMMAC_TIMER_MSG(CONFIG_RTC_HCTOSYS_DEVICE, tm->freq); + + tm->timer_start = stmmac_rtc_start; + tm->timer_stop = stmmac_rtc_stop; + + return 0; +} + +int stmmac_close_ext_timer(void) +{ + rtc_irq_set_state(stmmac_rtc, &stmmac_task, 0); + rtc_irq_unregister(stmmac_rtc, &stmmac_task); + rtc_class_close(stmmac_rtc); + return 0; +} + +#elif defined(CONFIG_STMMAC_TMU_TIMER) +#include <linux/clk.h> +#define TMU_CHANNEL "tmu2_clk" +static struct clk *timer_clock; + +static void stmmac_tmu_start(unsigned int new_freq) +{ + clk_set_rate(timer_clock, new_freq); + clk_enable(timer_clock); + return; +} + +static void stmmac_tmu_stop(void) +{ + clk_disable(timer_clock); + return; +} + +int stmmac_open_ext_timer(struct net_device *dev, struct stmmac_timer *tm) +{ + timer_clock = clk_get(NULL, TMU_CHANNEL); + + if (timer_clock == NULL) + return -1; + + if (tmu2_register_user(stmmac_timer_handler, (void *)dev) < 0) { + timer_clock = NULL; + return -1; + } + + STMMAC_TIMER_MSG("TMU2", tm->freq); + tm->timer_start = stmmac_tmu_start; + tm->timer_stop = stmmac_tmu_stop; + + return 0; +} + +int stmmac_close_ext_timer(void) +{ + clk_disable(timer_clock); + tmu2_unregister_user(); + clk_put(timer_clock); + return 0; +} +#endif diff --git a/drivers/net/stmmac/stmmac_timer.h b/drivers/net/stmmac/stmmac_timer.h new file mode 100644 index 000000000000..f795cae33725 --- /dev/null +++ b/drivers/net/stmmac/stmmac_timer.h @@ -0,0 +1,41 @@ +/******************************************************************************* + STMMAC external timer Header File. + + Copyright (C) 2007-2009 STMicroelectronics Ltd + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> +*******************************************************************************/ + +struct stmmac_timer { + void (*timer_start) (unsigned int new_freq); + void (*timer_stop) (void); + unsigned int freq; +}; + +/* Open the HW timer device and return 0 in case of success */ +int stmmac_open_ext_timer(struct net_device *dev, struct stmmac_timer *tm); +/* Stop the timer and release it */ +int stmmac_close_ext_timer(void); +/* Function used for scheduling task within the stmmac */ +void stmmac_schedule(struct net_device *dev); + +#if defined(CONFIG_STMMAC_TMU_TIMER) +extern int tmu2_register_user(void *fnt, void *data); +extern void tmu2_unregister_user(void); +#endif diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c index 305ec3d783db..7019a0d1a82b 100644 --- a/drivers/net/sungem.c +++ b/drivers/net/sungem.c @@ -38,6 +38,7 @@ #include <linux/interrupt.h> #include <linux/ioport.h> #include <linux/in.h> +#include <linux/sched.h> #include <linux/slab.h> #include <linux/string.h> #include <linux/delay.h> diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index f09bc5dfe8b2..ba5d3fe753b6 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -902,11 +902,12 @@ static int tg3_mdio_read(struct mii_bus *bp, int mii_id, int reg) struct tg3 *tp = bp->priv; u32 val; - if (tp->tg3_flags3 & TG3_FLG3_MDIOBUS_PAUSED) - return -EAGAIN; + spin_lock_bh(&tp->lock); if (tg3_readphy(tp, reg, &val)) - return -EIO; + val = -EIO; + + spin_unlock_bh(&tp->lock); return val; } @@ -914,14 +915,16 @@ static int tg3_mdio_read(struct mii_bus *bp, int mii_id, int reg) static int tg3_mdio_write(struct mii_bus *bp, int mii_id, int reg, u16 val) { struct tg3 *tp = bp->priv; + u32 ret = 0; - if (tp->tg3_flags3 & TG3_FLG3_MDIOBUS_PAUSED) - return -EAGAIN; + spin_lock_bh(&tp->lock); if (tg3_writephy(tp, reg, val)) - return -EIO; + ret = -EIO; - return 0; + spin_unlock_bh(&tp->lock); + + return ret; } static int tg3_mdio_reset(struct mii_bus *bp) @@ -1011,12 +1014,6 @@ static void tg3_mdio_config_5785(struct tg3 *tp) static void tg3_mdio_start(struct tg3 *tp) { - if (tp->tg3_flags3 & TG3_FLG3_MDIOBUS_INITED) { - mutex_lock(&tp->mdio_bus->mdio_lock); - tp->tg3_flags3 &= ~TG3_FLG3_MDIOBUS_PAUSED; - mutex_unlock(&tp->mdio_bus->mdio_lock); - } - tp->mi_mode &= ~MAC_MI_MODE_AUTO_POLL; tw32_f(MAC_MI_MODE, tp->mi_mode); udelay(80); @@ -1041,15 +1038,6 @@ static void tg3_mdio_start(struct tg3 *tp) tg3_mdio_config_5785(tp); } -static void tg3_mdio_stop(struct tg3 *tp) -{ - if (tp->tg3_flags3 & TG3_FLG3_MDIOBUS_INITED) { - mutex_lock(&tp->mdio_bus->mdio_lock); - tp->tg3_flags3 |= TG3_FLG3_MDIOBUS_PAUSED; - mutex_unlock(&tp->mdio_bus->mdio_lock); - } -} - static int tg3_mdio_init(struct tg3 *tp) { int i; @@ -1141,7 +1129,6 @@ static void tg3_mdio_fini(struct tg3 *tp) tp->tg3_flags3 &= ~TG3_FLG3_MDIOBUS_INITED; mdiobus_unregister(tp->mdio_bus); mdiobus_free(tp->mdio_bus); - tp->tg3_flags3 &= ~TG3_FLG3_MDIOBUS_PAUSED; } } @@ -1363,7 +1350,7 @@ static void tg3_adjust_link(struct net_device *dev) struct tg3 *tp = netdev_priv(dev); struct phy_device *phydev = tp->mdio_bus->phy_map[PHY_ADDR]; - spin_lock(&tp->lock); + spin_lock_bh(&tp->lock); mac_mode = tp->mac_mode & ~(MAC_MODE_PORT_MODE_MASK | MAC_MODE_HALF_DUPLEX); @@ -1431,7 +1418,7 @@ static void tg3_adjust_link(struct net_device *dev) tp->link_config.active_speed = phydev->speed; tp->link_config.active_duplex = phydev->duplex; - spin_unlock(&tp->lock); + spin_unlock_bh(&tp->lock); if (linkmesg) tg3_link_report(tp); @@ -6392,8 +6379,6 @@ static int tg3_chip_reset(struct tg3 *tp) tg3_nvram_lock(tp); - tg3_mdio_stop(tp); - tg3_ape_lock(tp, TG3_APE_LOCK_GRC); /* No matching tg3_nvram_unlock() after this because @@ -8698,6 +8683,8 @@ static int tg3_close(struct net_device *dev) del_timer_sync(&tp->timer); + tg3_phy_stop(tp); + tg3_full_lock(tp, 1); #if 0 tg3_dump_state(tp); diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h index 82b45d8797b4..bab7940158e6 100644 --- a/drivers/net/tg3.h +++ b/drivers/net/tg3.h @@ -2412,7 +2412,6 @@ struct ring_info { struct tx_ring_info { struct sk_buff *skb; - u32 prev_vlan_tag; }; struct tg3_config_info { @@ -2749,7 +2748,6 @@ struct tg3 { #define TG3_FLG3_5701_DMA_BUG 0x00000008 #define TG3_FLG3_USE_PHYLIB 0x00000010 #define TG3_FLG3_MDIOBUS_INITED 0x00000020 -#define TG3_FLG3_MDIOBUS_PAUSED 0x00000040 #define TG3_FLG3_PHY_CONNECTED 0x00000080 #define TG3_FLG3_RGMII_STD_IBND_DISABLE 0x00000100 #define TG3_FLG3_RGMII_EXT_IBND_RX_EN 0x00000200 diff --git a/drivers/net/tokenring/ibmtr.c b/drivers/net/tokenring/ibmtr.c index 525bbc5b9c9d..36cb2423bcf1 100644 --- a/drivers/net/tokenring/ibmtr.c +++ b/drivers/net/tokenring/ibmtr.c @@ -108,6 +108,7 @@ in the event that chatty debug messages are desired - jjs 12/30/98 */ #define IBMTR_DEBUG_MESSAGES 0 #include <linux/module.h> +#include <linux/sched.h> #ifdef PCMCIA /* required for ibmtr_cs.c to build */ #undef MODULE /* yes, really */ diff --git a/drivers/net/typhoon.c b/drivers/net/typhoon.c index d6d345229fe9..5921f5bdd764 100644 --- a/drivers/net/typhoon.c +++ b/drivers/net/typhoon.c @@ -108,6 +108,7 @@ static const int multicast_filter_limit = 32; #include <linux/module.h> #include <linux/kernel.h> +#include <linux/sched.h> #include <linux/string.h> #include <linux/timer.h> #include <linux/errno.h> diff --git a/drivers/net/usb/pegasus.c b/drivers/net/usb/pegasus.c index 6fdaba8674b9..ed4a508ef262 100644 --- a/drivers/net/usb/pegasus.c +++ b/drivers/net/usb/pegasus.c @@ -62,8 +62,11 @@ static char *devid=NULL; static struct usb_eth_dev usb_dev_id[] = { #define PEGASUS_DEV(pn, vid, pid, flags) \ {.name = pn, .vendor = vid, .device = pid, .private = flags}, +#define PEGASUS_DEV_CLASS(pn, vid, pid, dclass, flags) \ + PEGASUS_DEV(pn, vid, pid, flags) #include "pegasus.h" #undef PEGASUS_DEV +#undef PEGASUS_DEV_CLASS {NULL, 0, 0, 0}, {NULL, 0, 0, 0} }; @@ -71,8 +74,18 @@ static struct usb_eth_dev usb_dev_id[] = { static struct usb_device_id pegasus_ids[] = { #define PEGASUS_DEV(pn, vid, pid, flags) \ {.match_flags = USB_DEVICE_ID_MATCH_DEVICE, .idVendor = vid, .idProduct = pid}, +/* + * The Belkin F8T012xx1 bluetooth adaptor has the same vendor and product + * IDs as the Belkin F5D5050, so we need to teach the pegasus driver to + * ignore adaptors belonging to the "Wireless" class 0xE0. For this one + * case anyway, seeing as the pegasus is for "Wired" adaptors. + */ +#define PEGASUS_DEV_CLASS(pn, vid, pid, dclass, flags) \ + {.match_flags = (USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_DEV_CLASS), \ + .idVendor = vid, .idProduct = pid, .bDeviceClass = dclass}, #include "pegasus.h" #undef PEGASUS_DEV +#undef PEGASUS_DEV_CLASS {}, {} }; diff --git a/drivers/net/usb/pegasus.h b/drivers/net/usb/pegasus.h index f968c834ff63..5d02f0200737 100644 --- a/drivers/net/usb/pegasus.h +++ b/drivers/net/usb/pegasus.h @@ -202,7 +202,11 @@ PEGASUS_DEV( "AEI USB Fast Ethernet Adapter", VENDOR_AEILAB, 0x1701, DEFAULT_GPIO_RESET | PEGASUS_II ) PEGASUS_DEV( "Allied Telesyn Int. AT-USB100", VENDOR_ALLIEDTEL, 0xb100, DEFAULT_GPIO_RESET | PEGASUS_II ) -PEGASUS_DEV( "Belkin F5D5050 USB Ethernet", VENDOR_BELKIN, 0x0121, +/* + * Distinguish between this Belkin adaptor and the Belkin bluetooth adaptors + * with the same product IDs by checking the device class too. + */ +PEGASUS_DEV_CLASS( "Belkin F5D5050 USB Ethernet", VENDOR_BELKIN, 0x0121, 0x00, DEFAULT_GPIO_RESET | PEGASUS_II ) PEGASUS_DEV( "Billionton USB-100", VENDOR_BILLIONTON, 0x0986, DEFAULT_GPIO_RESET ) diff --git a/drivers/net/usb/rndis_host.c b/drivers/net/usb/rndis_host.c index d032bba9bc4c..0caa8008c51c 100644 --- a/drivers/net/usb/rndis_host.c +++ b/drivers/net/usb/rndis_host.c @@ -418,6 +418,7 @@ generic_rndis_bind(struct usbnet *dev, struct usb_interface *intf, int flags) goto halt_fail_and_release; } memcpy(net->dev_addr, bp, ETH_ALEN); + memcpy(net->perm_addr, bp, ETH_ALEN); /* set a nonzero filter to enable data transfers */ memset(u.set, 0, sizeof *u.set); diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index d445845f2779..8d009760277c 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -948,7 +948,7 @@ free: return err; } -static void virtnet_remove(struct virtio_device *vdev) +static void __devexit virtnet_remove(struct virtio_device *vdev) { struct virtnet_info *vi = vdev->priv; struct sk_buff *skb; diff --git a/drivers/net/vmxnet3/Makefile b/drivers/net/vmxnet3/Makefile new file mode 100644 index 000000000000..880f5098eac9 --- /dev/null +++ b/drivers/net/vmxnet3/Makefile @@ -0,0 +1,35 @@ +################################################################################ +# +# Linux driver for VMware's vmxnet3 ethernet NIC. +# +# Copyright (C) 2007-2009, VMware, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by the +# Free Software Foundation; version 2 of the License and no later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or +# NON INFRINGEMENT. See the GNU General Public License for more +# details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. +# +# The full GNU General Public License is included in this distribution in +# the file called "COPYING". +# +# Maintained by: Shreyas Bhatewara <pv-drivers@vmware.com> +# +# +################################################################################ + +# +# Makefile for the VMware vmxnet3 ethernet NIC driver +# + +obj-$(CONFIG_VMXNET3) += vmxnet3.o + +vmxnet3-objs := vmxnet3_drv.o vmxnet3_ethtool.o diff --git a/drivers/net/vmxnet3/upt1_defs.h b/drivers/net/vmxnet3/upt1_defs.h new file mode 100644 index 000000000000..37108fb226d3 --- /dev/null +++ b/drivers/net/vmxnet3/upt1_defs.h @@ -0,0 +1,96 @@ +/* + * Linux driver for VMware's vmxnet3 ethernet NIC. + * + * Copyright (C) 2008-2009, VMware, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; version 2 of the License and no later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Maintained by: Shreyas Bhatewara <pv-drivers@vmware.com> + * + */ + +#ifndef _UPT1_DEFS_H +#define _UPT1_DEFS_H + +struct UPT1_TxStats { + u64 TSOPktsTxOK; /* TSO pkts post-segmentation */ + u64 TSOBytesTxOK; + u64 ucastPktsTxOK; + u64 ucastBytesTxOK; + u64 mcastPktsTxOK; + u64 mcastBytesTxOK; + u64 bcastPktsTxOK; + u64 bcastBytesTxOK; + u64 pktsTxError; + u64 pktsTxDiscard; +}; + +struct UPT1_RxStats { + u64 LROPktsRxOK; /* LRO pkts */ + u64 LROBytesRxOK; /* bytes from LRO pkts */ + /* the following counters are for pkts from the wire, i.e., pre-LRO */ + u64 ucastPktsRxOK; + u64 ucastBytesRxOK; + u64 mcastPktsRxOK; + u64 mcastBytesRxOK; + u64 bcastPktsRxOK; + u64 bcastBytesRxOK; + u64 pktsRxOutOfBuf; + u64 pktsRxError; +}; + +/* interrupt moderation level */ +enum { + UPT1_IML_NONE = 0, /* no interrupt moderation */ + UPT1_IML_HIGHEST = 7, /* least intr generated */ + UPT1_IML_ADAPTIVE = 8, /* adpative intr moderation */ +}; +/* values for UPT1_RSSConf.hashFunc */ +enum { + UPT1_RSS_HASH_TYPE_NONE = 0x0, + UPT1_RSS_HASH_TYPE_IPV4 = 0x01, + UPT1_RSS_HASH_TYPE_TCP_IPV4 = 0x02, + UPT1_RSS_HASH_TYPE_IPV6 = 0x04, + UPT1_RSS_HASH_TYPE_TCP_IPV6 = 0x08, +}; + +enum { + UPT1_RSS_HASH_FUNC_NONE = 0x0, + UPT1_RSS_HASH_FUNC_TOEPLITZ = 0x01, +}; + +#define UPT1_RSS_MAX_KEY_SIZE 40 +#define UPT1_RSS_MAX_IND_TABLE_SIZE 128 + +struct UPT1_RSSConf { + u16 hashType; + u16 hashFunc; + u16 hashKeySize; + u16 indTableSize; + u8 hashKey[UPT1_RSS_MAX_KEY_SIZE]; + u8 indTable[UPT1_RSS_MAX_IND_TABLE_SIZE]; +}; + +/* features */ +enum { + UPT1_F_RXCSUM = 0x0001, /* rx csum verification */ + UPT1_F_RSS = 0x0002, + UPT1_F_RXVLAN = 0x0004, /* VLAN tag stripping */ + UPT1_F_LRO = 0x0008, +}; +#endif diff --git a/drivers/net/vmxnet3/vmxnet3_defs.h b/drivers/net/vmxnet3/vmxnet3_defs.h new file mode 100644 index 000000000000..dc8ee4438a4f --- /dev/null +++ b/drivers/net/vmxnet3/vmxnet3_defs.h @@ -0,0 +1,535 @@ +/* + * Linux driver for VMware's vmxnet3 ethernet NIC. + * + * Copyright (C) 2008-2009, VMware, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; version 2 of the License and no later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Maintained by: Shreyas Bhatewara <pv-drivers@vmware.com> + * + */ + +#ifndef _VMXNET3_DEFS_H_ +#define _VMXNET3_DEFS_H_ + +#include "upt1_defs.h" + +/* all registers are 32 bit wide */ +/* BAR 1 */ +enum { + VMXNET3_REG_VRRS = 0x0, /* Vmxnet3 Revision Report Selection */ + VMXNET3_REG_UVRS = 0x8, /* UPT Version Report Selection */ + VMXNET3_REG_DSAL = 0x10, /* Driver Shared Address Low */ + VMXNET3_REG_DSAH = 0x18, /* Driver Shared Address High */ + VMXNET3_REG_CMD = 0x20, /* Command */ + VMXNET3_REG_MACL = 0x28, /* MAC Address Low */ + VMXNET3_REG_MACH = 0x30, /* MAC Address High */ + VMXNET3_REG_ICR = 0x38, /* Interrupt Cause Register */ + VMXNET3_REG_ECR = 0x40 /* Event Cause Register */ +}; + +/* BAR 0 */ +enum { + VMXNET3_REG_IMR = 0x0, /* Interrupt Mask Register */ + VMXNET3_REG_TXPROD = 0x600, /* Tx Producer Index */ + VMXNET3_REG_RXPROD = 0x800, /* Rx Producer Index for ring 1 */ + VMXNET3_REG_RXPROD2 = 0xA00 /* Rx Producer Index for ring 2 */ +}; + +#define VMXNET3_PT_REG_SIZE 4096 /* BAR 0 */ +#define VMXNET3_VD_REG_SIZE 4096 /* BAR 1 */ + +#define VMXNET3_REG_ALIGN 8 /* All registers are 8-byte aligned. */ +#define VMXNET3_REG_ALIGN_MASK 0x7 + +/* I/O Mapped access to registers */ +#define VMXNET3_IO_TYPE_PT 0 +#define VMXNET3_IO_TYPE_VD 1 +#define VMXNET3_IO_ADDR(type, reg) (((type) << 24) | ((reg) & 0xFFFFFF)) +#define VMXNET3_IO_TYPE(addr) ((addr) >> 24) +#define VMXNET3_IO_REG(addr) ((addr) & 0xFFFFFF) + +enum { + VMXNET3_CMD_FIRST_SET = 0xCAFE0000, + VMXNET3_CMD_ACTIVATE_DEV = VMXNET3_CMD_FIRST_SET, + VMXNET3_CMD_QUIESCE_DEV, + VMXNET3_CMD_RESET_DEV, + VMXNET3_CMD_UPDATE_RX_MODE, + VMXNET3_CMD_UPDATE_MAC_FILTERS, + VMXNET3_CMD_UPDATE_VLAN_FILTERS, + VMXNET3_CMD_UPDATE_RSSIDT, + VMXNET3_CMD_UPDATE_IML, + VMXNET3_CMD_UPDATE_PMCFG, + VMXNET3_CMD_UPDATE_FEATURE, + VMXNET3_CMD_LOAD_PLUGIN, + + VMXNET3_CMD_FIRST_GET = 0xF00D0000, + VMXNET3_CMD_GET_QUEUE_STATUS = VMXNET3_CMD_FIRST_GET, + VMXNET3_CMD_GET_STATS, + VMXNET3_CMD_GET_LINK, + VMXNET3_CMD_GET_PERM_MAC_LO, + VMXNET3_CMD_GET_PERM_MAC_HI, + VMXNET3_CMD_GET_DID_LO, + VMXNET3_CMD_GET_DID_HI, + VMXNET3_CMD_GET_DEV_EXTRA_INFO, + VMXNET3_CMD_GET_CONF_INTR +}; + +struct Vmxnet3_TxDesc { + u64 addr; + + u32 len:14; + u32 gen:1; /* generation bit */ + u32 rsvd:1; + u32 dtype:1; /* descriptor type */ + u32 ext1:1; + u32 msscof:14; /* MSS, checksum offset, flags */ + + u32 hlen:10; /* header len */ + u32 om:2; /* offload mode */ + u32 eop:1; /* End Of Packet */ + u32 cq:1; /* completion request */ + u32 ext2:1; + u32 ti:1; /* VLAN Tag Insertion */ + u32 tci:16; /* Tag to Insert */ +}; + +/* TxDesc.OM values */ +#define VMXNET3_OM_NONE 0 +#define VMXNET3_OM_CSUM 2 +#define VMXNET3_OM_TSO 3 + +/* fields in TxDesc we access w/o using bit fields */ +#define VMXNET3_TXD_EOP_SHIFT 12 +#define VMXNET3_TXD_CQ_SHIFT 13 +#define VMXNET3_TXD_GEN_SHIFT 14 + +#define VMXNET3_TXD_CQ (1 << VMXNET3_TXD_CQ_SHIFT) +#define VMXNET3_TXD_EOP (1 << VMXNET3_TXD_EOP_SHIFT) +#define VMXNET3_TXD_GEN (1 << VMXNET3_TXD_GEN_SHIFT) + +#define VMXNET3_HDR_COPY_SIZE 128 + + +struct Vmxnet3_TxDataDesc { + u8 data[VMXNET3_HDR_COPY_SIZE]; +}; + + +struct Vmxnet3_TxCompDesc { + u32 txdIdx:12; /* Index of the EOP TxDesc */ + u32 ext1:20; + + u32 ext2; + u32 ext3; + + u32 rsvd:24; + u32 type:7; /* completion type */ + u32 gen:1; /* generation bit */ +}; + + +struct Vmxnet3_RxDesc { + u64 addr; + + u32 len:14; + u32 btype:1; /* Buffer Type */ + u32 dtype:1; /* Descriptor type */ + u32 rsvd:15; + u32 gen:1; /* Generation bit */ + + u32 ext1; +}; + +/* values of RXD.BTYPE */ +#define VMXNET3_RXD_BTYPE_HEAD 0 /* head only */ +#define VMXNET3_RXD_BTYPE_BODY 1 /* body only */ + +/* fields in RxDesc we access w/o using bit fields */ +#define VMXNET3_RXD_BTYPE_SHIFT 14 +#define VMXNET3_RXD_GEN_SHIFT 31 + + +struct Vmxnet3_RxCompDesc { + u32 rxdIdx:12; /* Index of the RxDesc */ + u32 ext1:2; + u32 eop:1; /* End of Packet */ + u32 sop:1; /* Start of Packet */ + u32 rqID:10; /* rx queue/ring ID */ + u32 rssType:4; /* RSS hash type used */ + u32 cnc:1; /* Checksum Not Calculated */ + u32 ext2:1; + + u32 rssHash; /* RSS hash value */ + + u32 len:14; /* data length */ + u32 err:1; /* Error */ + u32 ts:1; /* Tag is stripped */ + u32 tci:16; /* Tag stripped */ + + u32 csum:16; + u32 tuc:1; /* TCP/UDP Checksum Correct */ + u32 udp:1; /* UDP packet */ + u32 tcp:1; /* TCP packet */ + u32 ipc:1; /* IP Checksum Correct */ + u32 v6:1; /* IPv6 */ + u32 v4:1; /* IPv4 */ + u32 frg:1; /* IP Fragment */ + u32 fcs:1; /* Frame CRC correct */ + u32 type:7; /* completion type */ + u32 gen:1; /* generation bit */ +}; + +/* fields in RxCompDesc we access via Vmxnet3_GenericDesc.dword[3] */ +#define VMXNET3_RCD_TUC_SHIFT 16 +#define VMXNET3_RCD_IPC_SHIFT 19 + +/* fields in RxCompDesc we access via Vmxnet3_GenericDesc.qword[1] */ +#define VMXNET3_RCD_TYPE_SHIFT 56 +#define VMXNET3_RCD_GEN_SHIFT 63 + +/* csum OK for TCP/UDP pkts over IP */ +#define VMXNET3_RCD_CSUM_OK (1 << VMXNET3_RCD_TUC_SHIFT | \ + 1 << VMXNET3_RCD_IPC_SHIFT) + +/* value of RxCompDesc.rssType */ +enum { + VMXNET3_RCD_RSS_TYPE_NONE = 0, + VMXNET3_RCD_RSS_TYPE_IPV4 = 1, + VMXNET3_RCD_RSS_TYPE_TCPIPV4 = 2, + VMXNET3_RCD_RSS_TYPE_IPV6 = 3, + VMXNET3_RCD_RSS_TYPE_TCPIPV6 = 4, +}; + + +/* a union for accessing all cmd/completion descriptors */ +union Vmxnet3_GenericDesc { + u64 qword[2]; + u32 dword[4]; + u16 word[8]; + struct Vmxnet3_TxDesc txd; + struct Vmxnet3_RxDesc rxd; + struct Vmxnet3_TxCompDesc tcd; + struct Vmxnet3_RxCompDesc rcd; +}; + +#define VMXNET3_INIT_GEN 1 + +/* Max size of a single tx buffer */ +#define VMXNET3_MAX_TX_BUF_SIZE (1 << 14) + +/* # of tx desc needed for a tx buffer size */ +#define VMXNET3_TXD_NEEDED(size) (((size) + VMXNET3_MAX_TX_BUF_SIZE - 1) / \ + VMXNET3_MAX_TX_BUF_SIZE) + +/* max # of tx descs for a non-tso pkt */ +#define VMXNET3_MAX_TXD_PER_PKT 16 + +/* Max size of a single rx buffer */ +#define VMXNET3_MAX_RX_BUF_SIZE ((1 << 14) - 1) +/* Minimum size of a type 0 buffer */ +#define VMXNET3_MIN_T0_BUF_SIZE 128 +#define VMXNET3_MAX_CSUM_OFFSET 1024 + +/* Ring base address alignment */ +#define VMXNET3_RING_BA_ALIGN 512 +#define VMXNET3_RING_BA_MASK (VMXNET3_RING_BA_ALIGN - 1) + +/* Ring size must be a multiple of 32 */ +#define VMXNET3_RING_SIZE_ALIGN 32 +#define VMXNET3_RING_SIZE_MASK (VMXNET3_RING_SIZE_ALIGN - 1) + +/* Max ring size */ +#define VMXNET3_TX_RING_MAX_SIZE 4096 +#define VMXNET3_TC_RING_MAX_SIZE 4096 +#define VMXNET3_RX_RING_MAX_SIZE 4096 +#define VMXNET3_RC_RING_MAX_SIZE 8192 + +/* a list of reasons for queue stop */ + +enum { + VMXNET3_ERR_NOEOP = 0x80000000, /* cannot find the EOP desc of a pkt */ + VMXNET3_ERR_TXD_REUSE = 0x80000001, /* reuse TxDesc before tx completion */ + VMXNET3_ERR_BIG_PKT = 0x80000002, /* too many TxDesc for a pkt */ + VMXNET3_ERR_DESC_NOT_SPT = 0x80000003, /* descriptor type not supported */ + VMXNET3_ERR_SMALL_BUF = 0x80000004, /* type 0 buffer too small */ + VMXNET3_ERR_STRESS = 0x80000005, /* stress option firing in vmkernel */ + VMXNET3_ERR_SWITCH = 0x80000006, /* mode switch failure */ + VMXNET3_ERR_TXD_INVALID = 0x80000007, /* invalid TxDesc */ +}; + +/* completion descriptor types */ +#define VMXNET3_CDTYPE_TXCOMP 0 /* Tx Completion Descriptor */ +#define VMXNET3_CDTYPE_RXCOMP 3 /* Rx Completion Descriptor */ + +enum { + VMXNET3_GOS_BITS_UNK = 0, /* unknown */ + VMXNET3_GOS_BITS_32 = 1, + VMXNET3_GOS_BITS_64 = 2, +}; + +#define VMXNET3_GOS_TYPE_LINUX 1 + + +struct Vmxnet3_GOSInfo { + u32 gosBits:2; /* 32-bit or 64-bit? */ + u32 gosType:4; /* which guest */ + u32 gosVer:16; /* gos version */ + u32 gosMisc:10; /* other info about gos */ +}; + + +struct Vmxnet3_DriverInfo { + u32 version; + struct Vmxnet3_GOSInfo gos; + u32 vmxnet3RevSpt; + u32 uptVerSpt; +}; + + +#define VMXNET3_REV1_MAGIC 0xbabefee1 + +/* + * QueueDescPA must be 128 bytes aligned. It points to an array of + * Vmxnet3_TxQueueDesc followed by an array of Vmxnet3_RxQueueDesc. + * The number of Vmxnet3_TxQueueDesc/Vmxnet3_RxQueueDesc are specified by + * Vmxnet3_MiscConf.numTxQueues/numRxQueues, respectively. + */ +#define VMXNET3_QUEUE_DESC_ALIGN 128 + + +struct Vmxnet3_MiscConf { + struct Vmxnet3_DriverInfo driverInfo; + u64 uptFeatures; + u64 ddPA; /* driver data PA */ + u64 queueDescPA; /* queue descriptor table PA */ + u32 ddLen; /* driver data len */ + u32 queueDescLen; /* queue desc. table len in bytes */ + u32 mtu; + u16 maxNumRxSG; + u8 numTxQueues; + u8 numRxQueues; + u32 reserved[4]; +}; + + +struct Vmxnet3_TxQueueConf { + u64 txRingBasePA; + u64 dataRingBasePA; + u64 compRingBasePA; + u64 ddPA; /* driver data */ + u64 reserved; + u32 txRingSize; /* # of tx desc */ + u32 dataRingSize; /* # of data desc */ + u32 compRingSize; /* # of comp desc */ + u32 ddLen; /* size of driver data */ + u8 intrIdx; + u8 _pad[7]; +}; + + +struct Vmxnet3_RxQueueConf { + u64 rxRingBasePA[2]; + u64 compRingBasePA; + u64 ddPA; /* driver data */ + u64 reserved; + u32 rxRingSize[2]; /* # of rx desc */ + u32 compRingSize; /* # of rx comp desc */ + u32 ddLen; /* size of driver data */ + u8 intrIdx; + u8 _pad[7]; +}; + + +enum vmxnet3_intr_mask_mode { + VMXNET3_IMM_AUTO = 0, + VMXNET3_IMM_ACTIVE = 1, + VMXNET3_IMM_LAZY = 2 +}; + +enum vmxnet3_intr_type { + VMXNET3_IT_AUTO = 0, + VMXNET3_IT_INTX = 1, + VMXNET3_IT_MSI = 2, + VMXNET3_IT_MSIX = 3 +}; + +#define VMXNET3_MAX_TX_QUEUES 8 +#define VMXNET3_MAX_RX_QUEUES 16 +/* addition 1 for events */ +#define VMXNET3_MAX_INTRS 25 + + +struct Vmxnet3_IntrConf { + bool autoMask; + u8 numIntrs; /* # of interrupts */ + u8 eventIntrIdx; + u8 modLevels[VMXNET3_MAX_INTRS]; /* moderation level for + * each intr */ + u32 reserved[3]; +}; + +/* one bit per VLAN ID, the size is in the units of u32 */ +#define VMXNET3_VFT_SIZE (4096 / (sizeof(u32) * 8)) + + +struct Vmxnet3_QueueStatus { + bool stopped; + u8 _pad[3]; + u32 error; +}; + + +struct Vmxnet3_TxQueueCtrl { + u32 txNumDeferred; + u32 txThreshold; + u64 reserved; +}; + + +struct Vmxnet3_RxQueueCtrl { + bool updateRxProd; + u8 _pad[7]; + u64 reserved; +}; + +enum { + VMXNET3_RXM_UCAST = 0x01, /* unicast only */ + VMXNET3_RXM_MCAST = 0x02, /* multicast passing the filters */ + VMXNET3_RXM_BCAST = 0x04, /* broadcast only */ + VMXNET3_RXM_ALL_MULTI = 0x08, /* all multicast */ + VMXNET3_RXM_PROMISC = 0x10 /* promiscuous */ +}; + +struct Vmxnet3_RxFilterConf { + u32 rxMode; /* VMXNET3_RXM_xxx */ + u16 mfTableLen; /* size of the multicast filter table */ + u16 _pad1; + u64 mfTablePA; /* PA of the multicast filters table */ + u32 vfTable[VMXNET3_VFT_SIZE]; /* vlan filter */ +}; + + +#define VMXNET3_PM_MAX_FILTERS 6 +#define VMXNET3_PM_MAX_PATTERN_SIZE 128 +#define VMXNET3_PM_MAX_MASK_SIZE (VMXNET3_PM_MAX_PATTERN_SIZE / 8) + +#define VMXNET3_PM_WAKEUP_MAGIC 0x01 /* wake up on magic pkts */ +#define VMXNET3_PM_WAKEUP_FILTER 0x02 /* wake up on pkts matching + * filters */ + + +struct Vmxnet3_PM_PktFilter { + u8 maskSize; + u8 patternSize; + u8 mask[VMXNET3_PM_MAX_MASK_SIZE]; + u8 pattern[VMXNET3_PM_MAX_PATTERN_SIZE]; + u8 pad[6]; +}; + + +struct Vmxnet3_PMConf { + u16 wakeUpEvents; /* VMXNET3_PM_WAKEUP_xxx */ + u8 numFilters; + u8 pad[5]; + struct Vmxnet3_PM_PktFilter filters[VMXNET3_PM_MAX_FILTERS]; +}; + + +struct Vmxnet3_VariableLenConfDesc { + u32 confVer; + u32 confLen; + u64 confPA; +}; + + +struct Vmxnet3_TxQueueDesc { + struct Vmxnet3_TxQueueCtrl ctrl; + struct Vmxnet3_TxQueueConf conf; + + /* Driver read after a GET command */ + struct Vmxnet3_QueueStatus status; + struct UPT1_TxStats stats; + u8 _pad[88]; /* 128 aligned */ +}; + + +struct Vmxnet3_RxQueueDesc { + struct Vmxnet3_RxQueueCtrl ctrl; + struct Vmxnet3_RxQueueConf conf; + /* Driver read after a GET commad */ + struct Vmxnet3_QueueStatus status; + struct UPT1_RxStats stats; + u8 __pad[88]; /* 128 aligned */ +}; + + +struct Vmxnet3_DSDevRead { + /* read-only region for device, read by dev in response to a SET cmd */ + struct Vmxnet3_MiscConf misc; + struct Vmxnet3_IntrConf intrConf; + struct Vmxnet3_RxFilterConf rxFilterConf; + struct Vmxnet3_VariableLenConfDesc rssConfDesc; + struct Vmxnet3_VariableLenConfDesc pmConfDesc; + struct Vmxnet3_VariableLenConfDesc pluginConfDesc; +}; + +/* All structures in DriverShared are padded to multiples of 8 bytes */ +struct Vmxnet3_DriverShared { + u32 magic; + /* make devRead start at 64bit boundaries */ + u32 pad; + struct Vmxnet3_DSDevRead devRead; + u32 ecr; + u32 reserved[5]; +}; + + +#define VMXNET3_ECR_RQERR (1 << 0) +#define VMXNET3_ECR_TQERR (1 << 1) +#define VMXNET3_ECR_LINK (1 << 2) +#define VMXNET3_ECR_DIC (1 << 3) +#define VMXNET3_ECR_DEBUG (1 << 4) + +/* flip the gen bit of a ring */ +#define VMXNET3_FLIP_RING_GEN(gen) ((gen) = (gen) ^ 0x1) + +/* only use this if moving the idx won't affect the gen bit */ +#define VMXNET3_INC_RING_IDX_ONLY(idx, ring_size) \ + do {\ + (idx)++;\ + if (unlikely((idx) == (ring_size))) {\ + (idx) = 0;\ + } \ + } while (0) + +#define VMXNET3_SET_VFTABLE_ENTRY(vfTable, vid) \ + (vfTable[vid >> 5] |= (1 << (vid & 31))) +#define VMXNET3_CLEAR_VFTABLE_ENTRY(vfTable, vid) \ + (vfTable[vid >> 5] &= ~(1 << (vid & 31))) + +#define VMXNET3_VFTABLE_ENTRY_IS_SET(vfTable, vid) \ + ((vfTable[vid >> 5] & (1 << (vid & 31))) != 0) + +#define VMXNET3_MAX_MTU 9000 +#define VMXNET3_MIN_MTU 60 + +#define VMXNET3_LINK_UP (10000 << 16 | 1) /* 10 Gbps, up */ +#define VMXNET3_LINK_DOWN 0 + +#endif /* _VMXNET3_DEFS_H_ */ diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c new file mode 100644 index 000000000000..6a16f76f277e --- /dev/null +++ b/drivers/net/vmxnet3/vmxnet3_drv.c @@ -0,0 +1,2565 @@ +/* + * Linux driver for VMware's vmxnet3 ethernet NIC. + * + * Copyright (C) 2008-2009, VMware, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; version 2 of the License and no later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Maintained by: Shreyas Bhatewara <pv-drivers@vmware.com> + * + */ + +#include "vmxnet3_int.h" + +char vmxnet3_driver_name[] = "vmxnet3"; +#define VMXNET3_DRIVER_DESC "VMware vmxnet3 virtual NIC driver" + + +/* + * PCI Device ID Table + * Last entry must be all 0s + */ +static const struct pci_device_id vmxnet3_pciid_table[] = { + {PCI_VDEVICE(VMWARE, PCI_DEVICE_ID_VMWARE_VMXNET3)}, + {0} +}; + +MODULE_DEVICE_TABLE(pci, vmxnet3_pciid_table); + +static atomic_t devices_found; + + +/* + * Enable/Disable the given intr + */ +static void +vmxnet3_enable_intr(struct vmxnet3_adapter *adapter, unsigned intr_idx) +{ + VMXNET3_WRITE_BAR0_REG(adapter, VMXNET3_REG_IMR + intr_idx * 8, 0); +} + + +static void +vmxnet3_disable_intr(struct vmxnet3_adapter *adapter, unsigned intr_idx) +{ + VMXNET3_WRITE_BAR0_REG(adapter, VMXNET3_REG_IMR + intr_idx * 8, 1); +} + + +/* + * Enable/Disable all intrs used by the device + */ +static void +vmxnet3_enable_all_intrs(struct vmxnet3_adapter *adapter) +{ + int i; + + for (i = 0; i < adapter->intr.num_intrs; i++) + vmxnet3_enable_intr(adapter, i); +} + + +static void +vmxnet3_disable_all_intrs(struct vmxnet3_adapter *adapter) +{ + int i; + + for (i = 0; i < adapter->intr.num_intrs; i++) + vmxnet3_disable_intr(adapter, i); +} + + +static void +vmxnet3_ack_events(struct vmxnet3_adapter *adapter, u32 events) +{ + VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_ECR, events); +} + + +static bool +vmxnet3_tq_stopped(struct vmxnet3_tx_queue *tq, struct vmxnet3_adapter *adapter) +{ + return netif_queue_stopped(adapter->netdev); +} + + +static void +vmxnet3_tq_start(struct vmxnet3_tx_queue *tq, struct vmxnet3_adapter *adapter) +{ + tq->stopped = false; + netif_start_queue(adapter->netdev); +} + + +static void +vmxnet3_tq_wake(struct vmxnet3_tx_queue *tq, struct vmxnet3_adapter *adapter) +{ + tq->stopped = false; + netif_wake_queue(adapter->netdev); +} + + +static void +vmxnet3_tq_stop(struct vmxnet3_tx_queue *tq, struct vmxnet3_adapter *adapter) +{ + tq->stopped = true; + tq->num_stop++; + netif_stop_queue(adapter->netdev); +} + + +/* + * Check the link state. This may start or stop the tx queue. + */ +static void +vmxnet3_check_link(struct vmxnet3_adapter *adapter) +{ + u32 ret; + + VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, VMXNET3_CMD_GET_LINK); + ret = VMXNET3_READ_BAR1_REG(adapter, VMXNET3_REG_CMD); + adapter->link_speed = ret >> 16; + if (ret & 1) { /* Link is up. */ + printk(KERN_INFO "%s: NIC Link is Up %d Mbps\n", + adapter->netdev->name, adapter->link_speed); + if (!netif_carrier_ok(adapter->netdev)) + netif_carrier_on(adapter->netdev); + + vmxnet3_tq_start(&adapter->tx_queue, adapter); + } else { + printk(KERN_INFO "%s: NIC Link is Down\n", + adapter->netdev->name); + if (netif_carrier_ok(adapter->netdev)) + netif_carrier_off(adapter->netdev); + + vmxnet3_tq_stop(&adapter->tx_queue, adapter); + } +} + + +static void +vmxnet3_process_events(struct vmxnet3_adapter *adapter) +{ + u32 events = adapter->shared->ecr; + if (!events) + return; + + vmxnet3_ack_events(adapter, events); + + /* Check if link state has changed */ + if (events & VMXNET3_ECR_LINK) + vmxnet3_check_link(adapter); + + /* Check if there is an error on xmit/recv queues */ + if (events & (VMXNET3_ECR_TQERR | VMXNET3_ECR_RQERR)) { + VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, + VMXNET3_CMD_GET_QUEUE_STATUS); + + if (adapter->tqd_start->status.stopped) { + printk(KERN_ERR "%s: tq error 0x%x\n", + adapter->netdev->name, + adapter->tqd_start->status.error); + } + if (adapter->rqd_start->status.stopped) { + printk(KERN_ERR "%s: rq error 0x%x\n", + adapter->netdev->name, + adapter->rqd_start->status.error); + } + + schedule_work(&adapter->work); + } +} + + +static void +vmxnet3_unmap_tx_buf(struct vmxnet3_tx_buf_info *tbi, + struct pci_dev *pdev) +{ + if (tbi->map_type == VMXNET3_MAP_SINGLE) + pci_unmap_single(pdev, tbi->dma_addr, tbi->len, + PCI_DMA_TODEVICE); + else if (tbi->map_type == VMXNET3_MAP_PAGE) + pci_unmap_page(pdev, tbi->dma_addr, tbi->len, + PCI_DMA_TODEVICE); + else + BUG_ON(tbi->map_type != VMXNET3_MAP_NONE); + + tbi->map_type = VMXNET3_MAP_NONE; /* to help debugging */ +} + + +static int +vmxnet3_unmap_pkt(u32 eop_idx, struct vmxnet3_tx_queue *tq, + struct pci_dev *pdev, struct vmxnet3_adapter *adapter) +{ + struct sk_buff *skb; + int entries = 0; + + /* no out of order completion */ + BUG_ON(tq->buf_info[eop_idx].sop_idx != tq->tx_ring.next2comp); + BUG_ON(tq->tx_ring.base[eop_idx].txd.eop != 1); + + skb = tq->buf_info[eop_idx].skb; + BUG_ON(skb == NULL); + tq->buf_info[eop_idx].skb = NULL; + + VMXNET3_INC_RING_IDX_ONLY(eop_idx, tq->tx_ring.size); + + while (tq->tx_ring.next2comp != eop_idx) { + vmxnet3_unmap_tx_buf(tq->buf_info + tq->tx_ring.next2comp, + pdev); + + /* update next2comp w/o tx_lock. Since we are marking more, + * instead of less, tx ring entries avail, the worst case is + * that the tx routine incorrectly re-queues a pkt due to + * insufficient tx ring entries. + */ + vmxnet3_cmd_ring_adv_next2comp(&tq->tx_ring); + entries++; + } + + dev_kfree_skb_any(skb); + return entries; +} + + +static int +vmxnet3_tq_tx_complete(struct vmxnet3_tx_queue *tq, + struct vmxnet3_adapter *adapter) +{ + int completed = 0; + union Vmxnet3_GenericDesc *gdesc; + + gdesc = tq->comp_ring.base + tq->comp_ring.next2proc; + while (gdesc->tcd.gen == tq->comp_ring.gen) { + completed += vmxnet3_unmap_pkt(gdesc->tcd.txdIdx, tq, + adapter->pdev, adapter); + + vmxnet3_comp_ring_adv_next2proc(&tq->comp_ring); + gdesc = tq->comp_ring.base + tq->comp_ring.next2proc; + } + + if (completed) { + spin_lock(&tq->tx_lock); + if (unlikely(vmxnet3_tq_stopped(tq, adapter) && + vmxnet3_cmd_ring_desc_avail(&tq->tx_ring) > + VMXNET3_WAKE_QUEUE_THRESHOLD(tq) && + netif_carrier_ok(adapter->netdev))) { + vmxnet3_tq_wake(tq, adapter); + } + spin_unlock(&tq->tx_lock); + } + return completed; +} + + +static void +vmxnet3_tq_cleanup(struct vmxnet3_tx_queue *tq, + struct vmxnet3_adapter *adapter) +{ + int i; + + while (tq->tx_ring.next2comp != tq->tx_ring.next2fill) { + struct vmxnet3_tx_buf_info *tbi; + union Vmxnet3_GenericDesc *gdesc; + + tbi = tq->buf_info + tq->tx_ring.next2comp; + gdesc = tq->tx_ring.base + tq->tx_ring.next2comp; + + vmxnet3_unmap_tx_buf(tbi, adapter->pdev); + if (tbi->skb) { + dev_kfree_skb_any(tbi->skb); + tbi->skb = NULL; + } + vmxnet3_cmd_ring_adv_next2comp(&tq->tx_ring); + } + + /* sanity check, verify all buffers are indeed unmapped and freed */ + for (i = 0; i < tq->tx_ring.size; i++) { + BUG_ON(tq->buf_info[i].skb != NULL || + tq->buf_info[i].map_type != VMXNET3_MAP_NONE); + } + + tq->tx_ring.gen = VMXNET3_INIT_GEN; + tq->tx_ring.next2fill = tq->tx_ring.next2comp = 0; + + tq->comp_ring.gen = VMXNET3_INIT_GEN; + tq->comp_ring.next2proc = 0; +} + + +void +vmxnet3_tq_destroy(struct vmxnet3_tx_queue *tq, + struct vmxnet3_adapter *adapter) +{ + if (tq->tx_ring.base) { + pci_free_consistent(adapter->pdev, tq->tx_ring.size * + sizeof(struct Vmxnet3_TxDesc), + tq->tx_ring.base, tq->tx_ring.basePA); + tq->tx_ring.base = NULL; + } + if (tq->data_ring.base) { + pci_free_consistent(adapter->pdev, tq->data_ring.size * + sizeof(struct Vmxnet3_TxDataDesc), + tq->data_ring.base, tq->data_ring.basePA); + tq->data_ring.base = NULL; + } + if (tq->comp_ring.base) { + pci_free_consistent(adapter->pdev, tq->comp_ring.size * + sizeof(struct Vmxnet3_TxCompDesc), + tq->comp_ring.base, tq->comp_ring.basePA); + tq->comp_ring.base = NULL; + } + kfree(tq->buf_info); + tq->buf_info = NULL; +} + + +static void +vmxnet3_tq_init(struct vmxnet3_tx_queue *tq, + struct vmxnet3_adapter *adapter) +{ + int i; + + /* reset the tx ring contents to 0 and reset the tx ring states */ + memset(tq->tx_ring.base, 0, tq->tx_ring.size * + sizeof(struct Vmxnet3_TxDesc)); + tq->tx_ring.next2fill = tq->tx_ring.next2comp = 0; + tq->tx_ring.gen = VMXNET3_INIT_GEN; + + memset(tq->data_ring.base, 0, tq->data_ring.size * + sizeof(struct Vmxnet3_TxDataDesc)); + + /* reset the tx comp ring contents to 0 and reset comp ring states */ + memset(tq->comp_ring.base, 0, tq->comp_ring.size * + sizeof(struct Vmxnet3_TxCompDesc)); + tq->comp_ring.next2proc = 0; + tq->comp_ring.gen = VMXNET3_INIT_GEN; + + /* reset the bookkeeping data */ + memset(tq->buf_info, 0, sizeof(tq->buf_info[0]) * tq->tx_ring.size); + for (i = 0; i < tq->tx_ring.size; i++) + tq->buf_info[i].map_type = VMXNET3_MAP_NONE; + + /* stats are not reset */ +} + + +static int +vmxnet3_tq_create(struct vmxnet3_tx_queue *tq, + struct vmxnet3_adapter *adapter) +{ + BUG_ON(tq->tx_ring.base || tq->data_ring.base || + tq->comp_ring.base || tq->buf_info); + + tq->tx_ring.base = pci_alloc_consistent(adapter->pdev, tq->tx_ring.size + * sizeof(struct Vmxnet3_TxDesc), + &tq->tx_ring.basePA); + if (!tq->tx_ring.base) { + printk(KERN_ERR "%s: failed to allocate tx ring\n", + adapter->netdev->name); + goto err; + } + + tq->data_ring.base = pci_alloc_consistent(adapter->pdev, + tq->data_ring.size * + sizeof(struct Vmxnet3_TxDataDesc), + &tq->data_ring.basePA); + if (!tq->data_ring.base) { + printk(KERN_ERR "%s: failed to allocate data ring\n", + adapter->netdev->name); + goto err; + } + + tq->comp_ring.base = pci_alloc_consistent(adapter->pdev, + tq->comp_ring.size * + sizeof(struct Vmxnet3_TxCompDesc), + &tq->comp_ring.basePA); + if (!tq->comp_ring.base) { + printk(KERN_ERR "%s: failed to allocate tx comp ring\n", + adapter->netdev->name); + goto err; + } + + tq->buf_info = kcalloc(tq->tx_ring.size, sizeof(tq->buf_info[0]), + GFP_KERNEL); + if (!tq->buf_info) { + printk(KERN_ERR "%s: failed to allocate tx bufinfo\n", + adapter->netdev->name); + goto err; + } + + return 0; + +err: + vmxnet3_tq_destroy(tq, adapter); + return -ENOMEM; +} + + +/* + * starting from ring->next2fill, allocate rx buffers for the given ring + * of the rx queue and update the rx desc. stop after @num_to_alloc buffers + * are allocated or allocation fails + */ + +static int +vmxnet3_rq_alloc_rx_buf(struct vmxnet3_rx_queue *rq, u32 ring_idx, + int num_to_alloc, struct vmxnet3_adapter *adapter) +{ + int num_allocated = 0; + struct vmxnet3_rx_buf_info *rbi_base = rq->buf_info[ring_idx]; + struct vmxnet3_cmd_ring *ring = &rq->rx_ring[ring_idx]; + u32 val; + + while (num_allocated < num_to_alloc) { + struct vmxnet3_rx_buf_info *rbi; + union Vmxnet3_GenericDesc *gd; + + rbi = rbi_base + ring->next2fill; + gd = ring->base + ring->next2fill; + + if (rbi->buf_type == VMXNET3_RX_BUF_SKB) { + if (rbi->skb == NULL) { + rbi->skb = dev_alloc_skb(rbi->len + + NET_IP_ALIGN); + if (unlikely(rbi->skb == NULL)) { + rq->stats.rx_buf_alloc_failure++; + break; + } + rbi->skb->dev = adapter->netdev; + + skb_reserve(rbi->skb, NET_IP_ALIGN); + rbi->dma_addr = pci_map_single(adapter->pdev, + rbi->skb->data, rbi->len, + PCI_DMA_FROMDEVICE); + } else { + /* rx buffer skipped by the device */ + } + val = VMXNET3_RXD_BTYPE_HEAD << VMXNET3_RXD_BTYPE_SHIFT; + } else { + BUG_ON(rbi->buf_type != VMXNET3_RX_BUF_PAGE || + rbi->len != PAGE_SIZE); + + if (rbi->page == NULL) { + rbi->page = alloc_page(GFP_ATOMIC); + if (unlikely(rbi->page == NULL)) { + rq->stats.rx_buf_alloc_failure++; + break; + } + rbi->dma_addr = pci_map_page(adapter->pdev, + rbi->page, 0, PAGE_SIZE, + PCI_DMA_FROMDEVICE); + } else { + /* rx buffers skipped by the device */ + } + val = VMXNET3_RXD_BTYPE_BODY << VMXNET3_RXD_BTYPE_SHIFT; + } + + BUG_ON(rbi->dma_addr == 0); + gd->rxd.addr = rbi->dma_addr; + gd->dword[2] = (ring->gen << VMXNET3_RXD_GEN_SHIFT) | val | + rbi->len; + + num_allocated++; + vmxnet3_cmd_ring_adv_next2fill(ring); + } + rq->uncommitted[ring_idx] += num_allocated; + + dprintk(KERN_ERR "alloc_rx_buf: %d allocated, next2fill %u, next2comp " + "%u, uncommited %u\n", num_allocated, ring->next2fill, + ring->next2comp, rq->uncommitted[ring_idx]); + + /* so that the device can distinguish a full ring and an empty ring */ + BUG_ON(num_allocated != 0 && ring->next2fill == ring->next2comp); + + return num_allocated; +} + + +static void +vmxnet3_append_frag(struct sk_buff *skb, struct Vmxnet3_RxCompDesc *rcd, + struct vmxnet3_rx_buf_info *rbi) +{ + struct skb_frag_struct *frag = skb_shinfo(skb)->frags + + skb_shinfo(skb)->nr_frags; + + BUG_ON(skb_shinfo(skb)->nr_frags >= MAX_SKB_FRAGS); + + frag->page = rbi->page; + frag->page_offset = 0; + frag->size = rcd->len; + skb->data_len += frag->size; + skb_shinfo(skb)->nr_frags++; +} + + +static void +vmxnet3_map_pkt(struct sk_buff *skb, struct vmxnet3_tx_ctx *ctx, + struct vmxnet3_tx_queue *tq, struct pci_dev *pdev, + struct vmxnet3_adapter *adapter) +{ + u32 dw2, len; + unsigned long buf_offset; + int i; + union Vmxnet3_GenericDesc *gdesc; + struct vmxnet3_tx_buf_info *tbi = NULL; + + BUG_ON(ctx->copy_size > skb_headlen(skb)); + + /* use the previous gen bit for the SOP desc */ + dw2 = (tq->tx_ring.gen ^ 0x1) << VMXNET3_TXD_GEN_SHIFT; + + ctx->sop_txd = tq->tx_ring.base + tq->tx_ring.next2fill; + gdesc = ctx->sop_txd; /* both loops below can be skipped */ + + /* no need to map the buffer if headers are copied */ + if (ctx->copy_size) { + ctx->sop_txd->txd.addr = tq->data_ring.basePA + + tq->tx_ring.next2fill * + sizeof(struct Vmxnet3_TxDataDesc); + ctx->sop_txd->dword[2] = dw2 | ctx->copy_size; + ctx->sop_txd->dword[3] = 0; + + tbi = tq->buf_info + tq->tx_ring.next2fill; + tbi->map_type = VMXNET3_MAP_NONE; + + dprintk(KERN_ERR "txd[%u]: 0x%Lx 0x%x 0x%x\n", + tq->tx_ring.next2fill, ctx->sop_txd->txd.addr, + ctx->sop_txd->dword[2], ctx->sop_txd->dword[3]); + vmxnet3_cmd_ring_adv_next2fill(&tq->tx_ring); + + /* use the right gen for non-SOP desc */ + dw2 = tq->tx_ring.gen << VMXNET3_TXD_GEN_SHIFT; + } + + /* linear part can use multiple tx desc if it's big */ + len = skb_headlen(skb) - ctx->copy_size; + buf_offset = ctx->copy_size; + while (len) { + u32 buf_size; + + buf_size = len > VMXNET3_MAX_TX_BUF_SIZE ? + VMXNET3_MAX_TX_BUF_SIZE : len; + + tbi = tq->buf_info + tq->tx_ring.next2fill; + tbi->map_type = VMXNET3_MAP_SINGLE; + tbi->dma_addr = pci_map_single(adapter->pdev, + skb->data + buf_offset, buf_size, + PCI_DMA_TODEVICE); + + tbi->len = buf_size; /* this automatically convert 2^14 to 0 */ + + gdesc = tq->tx_ring.base + tq->tx_ring.next2fill; + BUG_ON(gdesc->txd.gen == tq->tx_ring.gen); + + gdesc->txd.addr = tbi->dma_addr; + gdesc->dword[2] = dw2 | buf_size; + gdesc->dword[3] = 0; + + dprintk(KERN_ERR "txd[%u]: 0x%Lx 0x%x 0x%x\n", + tq->tx_ring.next2fill, gdesc->txd.addr, + gdesc->dword[2], gdesc->dword[3]); + vmxnet3_cmd_ring_adv_next2fill(&tq->tx_ring); + dw2 = tq->tx_ring.gen << VMXNET3_TXD_GEN_SHIFT; + + len -= buf_size; + buf_offset += buf_size; + } + + for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { + struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[i]; + + tbi = tq->buf_info + tq->tx_ring.next2fill; + tbi->map_type = VMXNET3_MAP_PAGE; + tbi->dma_addr = pci_map_page(adapter->pdev, frag->page, + frag->page_offset, frag->size, + PCI_DMA_TODEVICE); + + tbi->len = frag->size; + + gdesc = tq->tx_ring.base + tq->tx_ring.next2fill; + BUG_ON(gdesc->txd.gen == tq->tx_ring.gen); + + gdesc->txd.addr = tbi->dma_addr; + gdesc->dword[2] = dw2 | frag->size; + gdesc->dword[3] = 0; + + dprintk(KERN_ERR "txd[%u]: 0x%llu %u %u\n", + tq->tx_ring.next2fill, gdesc->txd.addr, + gdesc->dword[2], gdesc->dword[3]); + vmxnet3_cmd_ring_adv_next2fill(&tq->tx_ring); + dw2 = tq->tx_ring.gen << VMXNET3_TXD_GEN_SHIFT; + } + + ctx->eop_txd = gdesc; + + /* set the last buf_info for the pkt */ + tbi->skb = skb; + tbi->sop_idx = ctx->sop_txd - tq->tx_ring.base; +} + + +/* + * parse and copy relevant protocol headers: + * For a tso pkt, relevant headers are L2/3/4 including options + * For a pkt requesting csum offloading, they are L2/3 and may include L4 + * if it's a TCP/UDP pkt + * + * Returns: + * -1: error happens during parsing + * 0: protocol headers parsed, but too big to be copied + * 1: protocol headers parsed and copied + * + * Other effects: + * 1. related *ctx fields are updated. + * 2. ctx->copy_size is # of bytes copied + * 3. the portion copied is guaranteed to be in the linear part + * + */ +static int +vmxnet3_parse_and_copy_hdr(struct sk_buff *skb, struct vmxnet3_tx_queue *tq, + struct vmxnet3_tx_ctx *ctx, + struct vmxnet3_adapter *adapter) +{ + struct Vmxnet3_TxDataDesc *tdd; + + if (ctx->mss) { + ctx->eth_ip_hdr_size = skb_transport_offset(skb); + ctx->l4_hdr_size = ((struct tcphdr *) + skb_transport_header(skb))->doff * 4; + ctx->copy_size = ctx->eth_ip_hdr_size + ctx->l4_hdr_size; + } else { + unsigned int pull_size; + + if (skb->ip_summed == CHECKSUM_PARTIAL) { + ctx->eth_ip_hdr_size = skb_transport_offset(skb); + + if (ctx->ipv4) { + struct iphdr *iph = (struct iphdr *) + skb_network_header(skb); + if (iph->protocol == IPPROTO_TCP) { + pull_size = ctx->eth_ip_hdr_size + + sizeof(struct tcphdr); + + if (unlikely(!pskb_may_pull(skb, + pull_size))) { + goto err; + } + ctx->l4_hdr_size = ((struct tcphdr *) + skb_transport_header(skb))->doff * 4; + } else if (iph->protocol == IPPROTO_UDP) { + ctx->l4_hdr_size = + sizeof(struct udphdr); + } else { + ctx->l4_hdr_size = 0; + } + } else { + /* for simplicity, don't copy L4 headers */ + ctx->l4_hdr_size = 0; + } + ctx->copy_size = ctx->eth_ip_hdr_size + + ctx->l4_hdr_size; + } else { + ctx->eth_ip_hdr_size = 0; + ctx->l4_hdr_size = 0; + /* copy as much as allowed */ + ctx->copy_size = min((unsigned int)VMXNET3_HDR_COPY_SIZE + , skb_headlen(skb)); + } + + /* make sure headers are accessible directly */ + if (unlikely(!pskb_may_pull(skb, ctx->copy_size))) + goto err; + } + + if (unlikely(ctx->copy_size > VMXNET3_HDR_COPY_SIZE)) { + tq->stats.oversized_hdr++; + ctx->copy_size = 0; + return 0; + } + + tdd = tq->data_ring.base + tq->tx_ring.next2fill; + + memcpy(tdd->data, skb->data, ctx->copy_size); + dprintk(KERN_ERR "copy %u bytes to dataRing[%u]\n", + ctx->copy_size, tq->tx_ring.next2fill); + return 1; + +err: + return -1; +} + + +static void +vmxnet3_prepare_tso(struct sk_buff *skb, + struct vmxnet3_tx_ctx *ctx) +{ + struct tcphdr *tcph = (struct tcphdr *)skb_transport_header(skb); + if (ctx->ipv4) { + struct iphdr *iph = (struct iphdr *)skb_network_header(skb); + iph->check = 0; + tcph->check = ~csum_tcpudp_magic(iph->saddr, iph->daddr, 0, + IPPROTO_TCP, 0); + } else { + struct ipv6hdr *iph = (struct ipv6hdr *)skb_network_header(skb); + tcph->check = ~csum_ipv6_magic(&iph->saddr, &iph->daddr, 0, + IPPROTO_TCP, 0); + } +} + + +/* + * Transmits a pkt thru a given tq + * Returns: + * NETDEV_TX_OK: descriptors are setup successfully + * NETDEV_TX_OK: error occured, the pkt is dropped + * NETDEV_TX_BUSY: tx ring is full, queue is stopped + * + * Side-effects: + * 1. tx ring may be changed + * 2. tq stats may be updated accordingly + * 3. shared->txNumDeferred may be updated + */ + +static int +vmxnet3_tq_xmit(struct sk_buff *skb, struct vmxnet3_tx_queue *tq, + struct vmxnet3_adapter *adapter, struct net_device *netdev) +{ + int ret; + u32 count; + unsigned long flags; + struct vmxnet3_tx_ctx ctx; + union Vmxnet3_GenericDesc *gdesc; + + /* conservatively estimate # of descriptors to use */ + count = VMXNET3_TXD_NEEDED(skb_headlen(skb)) + + skb_shinfo(skb)->nr_frags + 1; + + ctx.ipv4 = (skb->protocol == __constant_ntohs(ETH_P_IP)); + + ctx.mss = skb_shinfo(skb)->gso_size; + if (ctx.mss) { + if (skb_header_cloned(skb)) { + if (unlikely(pskb_expand_head(skb, 0, 0, + GFP_ATOMIC) != 0)) { + tq->stats.drop_tso++; + goto drop_pkt; + } + tq->stats.copy_skb_header++; + } + vmxnet3_prepare_tso(skb, &ctx); + } else { + if (unlikely(count > VMXNET3_MAX_TXD_PER_PKT)) { + + /* non-tso pkts must not use more than + * VMXNET3_MAX_TXD_PER_PKT entries + */ + if (skb_linearize(skb) != 0) { + tq->stats.drop_too_many_frags++; + goto drop_pkt; + } + tq->stats.linearized++; + + /* recalculate the # of descriptors to use */ + count = VMXNET3_TXD_NEEDED(skb_headlen(skb)) + 1; + } + } + + ret = vmxnet3_parse_and_copy_hdr(skb, tq, &ctx, adapter); + if (ret >= 0) { + BUG_ON(ret <= 0 && ctx.copy_size != 0); + /* hdrs parsed, check against other limits */ + if (ctx.mss) { + if (unlikely(ctx.eth_ip_hdr_size + ctx.l4_hdr_size > + VMXNET3_MAX_TX_BUF_SIZE)) { + goto hdr_too_big; + } + } else { + if (skb->ip_summed == CHECKSUM_PARTIAL) { + if (unlikely(ctx.eth_ip_hdr_size + + skb->csum_offset > + VMXNET3_MAX_CSUM_OFFSET)) { + goto hdr_too_big; + } + } + } + } else { + tq->stats.drop_hdr_inspect_err++; + goto drop_pkt; + } + + spin_lock_irqsave(&tq->tx_lock, flags); + + if (count > vmxnet3_cmd_ring_desc_avail(&tq->tx_ring)) { + tq->stats.tx_ring_full++; + dprintk(KERN_ERR "tx queue stopped on %s, next2comp %u" + " next2fill %u\n", adapter->netdev->name, + tq->tx_ring.next2comp, tq->tx_ring.next2fill); + + vmxnet3_tq_stop(tq, adapter); + spin_unlock_irqrestore(&tq->tx_lock, flags); + return NETDEV_TX_BUSY; + } + + /* fill tx descs related to addr & len */ + vmxnet3_map_pkt(skb, &ctx, tq, adapter->pdev, adapter); + + /* setup the EOP desc */ + ctx.eop_txd->dword[3] = VMXNET3_TXD_CQ | VMXNET3_TXD_EOP; + + /* setup the SOP desc */ + gdesc = ctx.sop_txd; + if (ctx.mss) { + gdesc->txd.hlen = ctx.eth_ip_hdr_size + ctx.l4_hdr_size; + gdesc->txd.om = VMXNET3_OM_TSO; + gdesc->txd.msscof = ctx.mss; + tq->shared->txNumDeferred += (skb->len - gdesc->txd.hlen + + ctx.mss - 1) / ctx.mss; + } else { + if (skb->ip_summed == CHECKSUM_PARTIAL) { + gdesc->txd.hlen = ctx.eth_ip_hdr_size; + gdesc->txd.om = VMXNET3_OM_CSUM; + gdesc->txd.msscof = ctx.eth_ip_hdr_size + + skb->csum_offset; + } else { + gdesc->txd.om = 0; + gdesc->txd.msscof = 0; + } + tq->shared->txNumDeferred++; + } + + if (vlan_tx_tag_present(skb)) { + gdesc->txd.ti = 1; + gdesc->txd.tci = vlan_tx_tag_get(skb); + } + + wmb(); + + /* finally flips the GEN bit of the SOP desc */ + gdesc->dword[2] ^= VMXNET3_TXD_GEN; + dprintk(KERN_ERR "txd[%u]: SOP 0x%Lx 0x%x 0x%x\n", + (u32)((union Vmxnet3_GenericDesc *)ctx.sop_txd - + tq->tx_ring.base), gdesc->txd.addr, gdesc->dword[2], + gdesc->dword[3]); + + spin_unlock_irqrestore(&tq->tx_lock, flags); + + if (tq->shared->txNumDeferred >= tq->shared->txThreshold) { + tq->shared->txNumDeferred = 0; + VMXNET3_WRITE_BAR0_REG(adapter, VMXNET3_REG_TXPROD, + tq->tx_ring.next2fill); + } + netdev->trans_start = jiffies; + + return NETDEV_TX_OK; + +hdr_too_big: + tq->stats.drop_oversized_hdr++; +drop_pkt: + tq->stats.drop_total++; + dev_kfree_skb(skb); + return NETDEV_TX_OK; +} + + +static netdev_tx_t +vmxnet3_xmit_frame(struct sk_buff *skb, struct net_device *netdev) +{ + struct vmxnet3_adapter *adapter = netdev_priv(netdev); + struct vmxnet3_tx_queue *tq = &adapter->tx_queue; + + return vmxnet3_tq_xmit(skb, tq, adapter, netdev); +} + + +static void +vmxnet3_rx_csum(struct vmxnet3_adapter *adapter, + struct sk_buff *skb, + union Vmxnet3_GenericDesc *gdesc) +{ + if (!gdesc->rcd.cnc && adapter->rxcsum) { + /* typical case: TCP/UDP over IP and both csums are correct */ + if ((gdesc->dword[3] & VMXNET3_RCD_CSUM_OK) == + VMXNET3_RCD_CSUM_OK) { + skb->ip_summed = CHECKSUM_UNNECESSARY; + BUG_ON(!(gdesc->rcd.tcp || gdesc->rcd.udp)); + BUG_ON(!(gdesc->rcd.v4 || gdesc->rcd.v6)); + BUG_ON(gdesc->rcd.frg); + } else { + if (gdesc->rcd.csum) { + skb->csum = htons(gdesc->rcd.csum); + skb->ip_summed = CHECKSUM_PARTIAL; + } else { + skb->ip_summed = CHECKSUM_NONE; + } + } + } else { + skb->ip_summed = CHECKSUM_NONE; + } +} + + +static void +vmxnet3_rx_error(struct vmxnet3_rx_queue *rq, struct Vmxnet3_RxCompDesc *rcd, + struct vmxnet3_rx_ctx *ctx, struct vmxnet3_adapter *adapter) +{ + rq->stats.drop_err++; + if (!rcd->fcs) + rq->stats.drop_fcs++; + + rq->stats.drop_total++; + + /* + * We do not unmap and chain the rx buffer to the skb. + * We basically pretend this buffer is not used and will be recycled + * by vmxnet3_rq_alloc_rx_buf() + */ + + /* + * ctx->skb may be NULL if this is the first and the only one + * desc for the pkt + */ + if (ctx->skb) + dev_kfree_skb_irq(ctx->skb); + + ctx->skb = NULL; +} + + +static int +vmxnet3_rq_rx_complete(struct vmxnet3_rx_queue *rq, + struct vmxnet3_adapter *adapter, int quota) +{ + static u32 rxprod_reg[2] = {VMXNET3_REG_RXPROD, VMXNET3_REG_RXPROD2}; + u32 num_rxd = 0; + struct Vmxnet3_RxCompDesc *rcd; + struct vmxnet3_rx_ctx *ctx = &rq->rx_ctx; + + rcd = &rq->comp_ring.base[rq->comp_ring.next2proc].rcd; + while (rcd->gen == rq->comp_ring.gen) { + struct vmxnet3_rx_buf_info *rbi; + struct sk_buff *skb; + int num_to_alloc; + struct Vmxnet3_RxDesc *rxd; + u32 idx, ring_idx; + + if (num_rxd >= quota) { + /* we may stop even before we see the EOP desc of + * the current pkt + */ + break; + } + num_rxd++; + + idx = rcd->rxdIdx; + ring_idx = rcd->rqID == rq->qid ? 0 : 1; + + rxd = &rq->rx_ring[ring_idx].base[idx].rxd; + rbi = rq->buf_info[ring_idx] + idx; + + BUG_ON(rxd->addr != rbi->dma_addr || rxd->len != rbi->len); + + if (unlikely(rcd->eop && rcd->err)) { + vmxnet3_rx_error(rq, rcd, ctx, adapter); + goto rcd_done; + } + + if (rcd->sop) { /* first buf of the pkt */ + BUG_ON(rxd->btype != VMXNET3_RXD_BTYPE_HEAD || + rcd->rqID != rq->qid); + + BUG_ON(rbi->buf_type != VMXNET3_RX_BUF_SKB); + BUG_ON(ctx->skb != NULL || rbi->skb == NULL); + + if (unlikely(rcd->len == 0)) { + /* Pretend the rx buffer is skipped. */ + BUG_ON(!(rcd->sop && rcd->eop)); + dprintk(KERN_ERR "rxRing[%u][%u] 0 length\n", + ring_idx, idx); + goto rcd_done; + } + + ctx->skb = rbi->skb; + rbi->skb = NULL; + + pci_unmap_single(adapter->pdev, rbi->dma_addr, rbi->len, + PCI_DMA_FROMDEVICE); + + skb_put(ctx->skb, rcd->len); + } else { + BUG_ON(ctx->skb == NULL); + /* non SOP buffer must be type 1 in most cases */ + if (rbi->buf_type == VMXNET3_RX_BUF_PAGE) { + BUG_ON(rxd->btype != VMXNET3_RXD_BTYPE_BODY); + + if (rcd->len) { + pci_unmap_page(adapter->pdev, + rbi->dma_addr, rbi->len, + PCI_DMA_FROMDEVICE); + + vmxnet3_append_frag(ctx->skb, rcd, rbi); + rbi->page = NULL; + } + } else { + /* + * The only time a non-SOP buffer is type 0 is + * when it's EOP and error flag is raised, which + * has already been handled. + */ + BUG_ON(true); + } + } + + skb = ctx->skb; + if (rcd->eop) { + skb->len += skb->data_len; + skb->truesize += skb->data_len; + + vmxnet3_rx_csum(adapter, skb, + (union Vmxnet3_GenericDesc *)rcd); + skb->protocol = eth_type_trans(skb, adapter->netdev); + + if (unlikely(adapter->vlan_grp && rcd->ts)) { + vlan_hwaccel_receive_skb(skb, + adapter->vlan_grp, rcd->tci); + } else { + netif_receive_skb(skb); + } + + adapter->netdev->last_rx = jiffies; + ctx->skb = NULL; + } + +rcd_done: + /* device may skip some rx descs */ + rq->rx_ring[ring_idx].next2comp = idx; + VMXNET3_INC_RING_IDX_ONLY(rq->rx_ring[ring_idx].next2comp, + rq->rx_ring[ring_idx].size); + + /* refill rx buffers frequently to avoid starving the h/w */ + num_to_alloc = vmxnet3_cmd_ring_desc_avail(rq->rx_ring + + ring_idx); + if (unlikely(num_to_alloc > VMXNET3_RX_ALLOC_THRESHOLD(rq, + ring_idx, adapter))) { + vmxnet3_rq_alloc_rx_buf(rq, ring_idx, num_to_alloc, + adapter); + + /* if needed, update the register */ + if (unlikely(rq->shared->updateRxProd)) { + VMXNET3_WRITE_BAR0_REG(adapter, + rxprod_reg[ring_idx] + rq->qid * 8, + rq->rx_ring[ring_idx].next2fill); + rq->uncommitted[ring_idx] = 0; + } + } + + vmxnet3_comp_ring_adv_next2proc(&rq->comp_ring); + rcd = &rq->comp_ring.base[rq->comp_ring.next2proc].rcd; + } + + return num_rxd; +} + + +static void +vmxnet3_rq_cleanup(struct vmxnet3_rx_queue *rq, + struct vmxnet3_adapter *adapter) +{ + u32 i, ring_idx; + struct Vmxnet3_RxDesc *rxd; + + for (ring_idx = 0; ring_idx < 2; ring_idx++) { + for (i = 0; i < rq->rx_ring[ring_idx].size; i++) { + rxd = &rq->rx_ring[ring_idx].base[i].rxd; + + if (rxd->btype == VMXNET3_RXD_BTYPE_HEAD && + rq->buf_info[ring_idx][i].skb) { + pci_unmap_single(adapter->pdev, rxd->addr, + rxd->len, PCI_DMA_FROMDEVICE); + dev_kfree_skb(rq->buf_info[ring_idx][i].skb); + rq->buf_info[ring_idx][i].skb = NULL; + } else if (rxd->btype == VMXNET3_RXD_BTYPE_BODY && + rq->buf_info[ring_idx][i].page) { + pci_unmap_page(adapter->pdev, rxd->addr, + rxd->len, PCI_DMA_FROMDEVICE); + put_page(rq->buf_info[ring_idx][i].page); + rq->buf_info[ring_idx][i].page = NULL; + } + } + + rq->rx_ring[ring_idx].gen = VMXNET3_INIT_GEN; + rq->rx_ring[ring_idx].next2fill = + rq->rx_ring[ring_idx].next2comp = 0; + rq->uncommitted[ring_idx] = 0; + } + + rq->comp_ring.gen = VMXNET3_INIT_GEN; + rq->comp_ring.next2proc = 0; +} + + +void vmxnet3_rq_destroy(struct vmxnet3_rx_queue *rq, + struct vmxnet3_adapter *adapter) +{ + int i; + int j; + + /* all rx buffers must have already been freed */ + for (i = 0; i < 2; i++) { + if (rq->buf_info[i]) { + for (j = 0; j < rq->rx_ring[i].size; j++) + BUG_ON(rq->buf_info[i][j].page != NULL); + } + } + + + kfree(rq->buf_info[0]); + + for (i = 0; i < 2; i++) { + if (rq->rx_ring[i].base) { + pci_free_consistent(adapter->pdev, rq->rx_ring[i].size + * sizeof(struct Vmxnet3_RxDesc), + rq->rx_ring[i].base, + rq->rx_ring[i].basePA); + rq->rx_ring[i].base = NULL; + } + rq->buf_info[i] = NULL; + } + + if (rq->comp_ring.base) { + pci_free_consistent(adapter->pdev, rq->comp_ring.size * + sizeof(struct Vmxnet3_RxCompDesc), + rq->comp_ring.base, rq->comp_ring.basePA); + rq->comp_ring.base = NULL; + } +} + + +static int +vmxnet3_rq_init(struct vmxnet3_rx_queue *rq, + struct vmxnet3_adapter *adapter) +{ + int i; + + /* initialize buf_info */ + for (i = 0; i < rq->rx_ring[0].size; i++) { + + /* 1st buf for a pkt is skbuff */ + if (i % adapter->rx_buf_per_pkt == 0) { + rq->buf_info[0][i].buf_type = VMXNET3_RX_BUF_SKB; + rq->buf_info[0][i].len = adapter->skb_buf_size; + } else { /* subsequent bufs for a pkt is frag */ + rq->buf_info[0][i].buf_type = VMXNET3_RX_BUF_PAGE; + rq->buf_info[0][i].len = PAGE_SIZE; + } + } + for (i = 0; i < rq->rx_ring[1].size; i++) { + rq->buf_info[1][i].buf_type = VMXNET3_RX_BUF_PAGE; + rq->buf_info[1][i].len = PAGE_SIZE; + } + + /* reset internal state and allocate buffers for both rings */ + for (i = 0; i < 2; i++) { + rq->rx_ring[i].next2fill = rq->rx_ring[i].next2comp = 0; + rq->uncommitted[i] = 0; + + memset(rq->rx_ring[i].base, 0, rq->rx_ring[i].size * + sizeof(struct Vmxnet3_RxDesc)); + rq->rx_ring[i].gen = VMXNET3_INIT_GEN; + } + if (vmxnet3_rq_alloc_rx_buf(rq, 0, rq->rx_ring[0].size - 1, + adapter) == 0) { + /* at least has 1 rx buffer for the 1st ring */ + return -ENOMEM; + } + vmxnet3_rq_alloc_rx_buf(rq, 1, rq->rx_ring[1].size - 1, adapter); + + /* reset the comp ring */ + rq->comp_ring.next2proc = 0; + memset(rq->comp_ring.base, 0, rq->comp_ring.size * + sizeof(struct Vmxnet3_RxCompDesc)); + rq->comp_ring.gen = VMXNET3_INIT_GEN; + + /* reset rxctx */ + rq->rx_ctx.skb = NULL; + + /* stats are not reset */ + return 0; +} + + +static int +vmxnet3_rq_create(struct vmxnet3_rx_queue *rq, struct vmxnet3_adapter *adapter) +{ + int i; + size_t sz; + struct vmxnet3_rx_buf_info *bi; + + for (i = 0; i < 2; i++) { + + sz = rq->rx_ring[i].size * sizeof(struct Vmxnet3_RxDesc); + rq->rx_ring[i].base = pci_alloc_consistent(adapter->pdev, sz, + &rq->rx_ring[i].basePA); + if (!rq->rx_ring[i].base) { + printk(KERN_ERR "%s: failed to allocate rx ring %d\n", + adapter->netdev->name, i); + goto err; + } + } + + sz = rq->comp_ring.size * sizeof(struct Vmxnet3_RxCompDesc); + rq->comp_ring.base = pci_alloc_consistent(adapter->pdev, sz, + &rq->comp_ring.basePA); + if (!rq->comp_ring.base) { + printk(KERN_ERR "%s: failed to allocate rx comp ring\n", + adapter->netdev->name); + goto err; + } + + sz = sizeof(struct vmxnet3_rx_buf_info) * (rq->rx_ring[0].size + + rq->rx_ring[1].size); + bi = kmalloc(sz, GFP_KERNEL); + if (!bi) { + printk(KERN_ERR "%s: failed to allocate rx bufinfo\n", + adapter->netdev->name); + goto err; + } + memset(bi, 0, sz); + rq->buf_info[0] = bi; + rq->buf_info[1] = bi + rq->rx_ring[0].size; + + return 0; + +err: + vmxnet3_rq_destroy(rq, adapter); + return -ENOMEM; +} + + +static int +vmxnet3_do_poll(struct vmxnet3_adapter *adapter, int budget) +{ + if (unlikely(adapter->shared->ecr)) + vmxnet3_process_events(adapter); + + vmxnet3_tq_tx_complete(&adapter->tx_queue, adapter); + return vmxnet3_rq_rx_complete(&adapter->rx_queue, adapter, budget); +} + + +static int +vmxnet3_poll(struct napi_struct *napi, int budget) +{ + struct vmxnet3_adapter *adapter = container_of(napi, + struct vmxnet3_adapter, napi); + int rxd_done; + + rxd_done = vmxnet3_do_poll(adapter, budget); + + if (rxd_done < budget) { + napi_complete(napi); + vmxnet3_enable_intr(adapter, 0); + } + return rxd_done; +} + + +/* Interrupt handler for vmxnet3 */ +static irqreturn_t +vmxnet3_intr(int irq, void *dev_id) +{ + struct net_device *dev = dev_id; + struct vmxnet3_adapter *adapter = netdev_priv(dev); + + if (unlikely(adapter->intr.type == VMXNET3_IT_INTX)) { + u32 icr = VMXNET3_READ_BAR1_REG(adapter, VMXNET3_REG_ICR); + if (unlikely(icr == 0)) + /* not ours */ + return IRQ_NONE; + } + + + /* disable intr if needed */ + if (adapter->intr.mask_mode == VMXNET3_IMM_ACTIVE) + vmxnet3_disable_intr(adapter, 0); + + napi_schedule(&adapter->napi); + + return IRQ_HANDLED; +} + +#ifdef CONFIG_NET_POLL_CONTROLLER + + +/* netpoll callback. */ +static void +vmxnet3_netpoll(struct net_device *netdev) +{ + struct vmxnet3_adapter *adapter = netdev_priv(netdev); + int irq; + +#ifdef CONFIG_PCI_MSI + if (adapter->intr.type == VMXNET3_IT_MSIX) + irq = adapter->intr.msix_entries[0].vector; + else +#endif + irq = adapter->pdev->irq; + + disable_irq(irq); + vmxnet3_intr(irq, netdev); + enable_irq(irq); +} +#endif + +static int +vmxnet3_request_irqs(struct vmxnet3_adapter *adapter) +{ + int err; + +#ifdef CONFIG_PCI_MSI + if (adapter->intr.type == VMXNET3_IT_MSIX) { + /* we only use 1 MSI-X vector */ + err = request_irq(adapter->intr.msix_entries[0].vector, + vmxnet3_intr, 0, adapter->netdev->name, + adapter->netdev); + } else +#endif + if (adapter->intr.type == VMXNET3_IT_MSI) { + err = request_irq(adapter->pdev->irq, vmxnet3_intr, 0, + adapter->netdev->name, adapter->netdev); + } else { + err = request_irq(adapter->pdev->irq, vmxnet3_intr, + IRQF_SHARED, adapter->netdev->name, + adapter->netdev); + } + + if (err) + printk(KERN_ERR "Failed to request irq %s (intr type:%d), error" + ":%d\n", adapter->netdev->name, adapter->intr.type, err); + + + if (!err) { + int i; + /* init our intr settings */ + for (i = 0; i < adapter->intr.num_intrs; i++) + adapter->intr.mod_levels[i] = UPT1_IML_ADAPTIVE; + + /* next setup intr index for all intr sources */ + adapter->tx_queue.comp_ring.intr_idx = 0; + adapter->rx_queue.comp_ring.intr_idx = 0; + adapter->intr.event_intr_idx = 0; + + printk(KERN_INFO "%s: intr type %u, mode %u, %u vectors " + "allocated\n", adapter->netdev->name, adapter->intr.type, + adapter->intr.mask_mode, adapter->intr.num_intrs); + } + + return err; +} + + +static void +vmxnet3_free_irqs(struct vmxnet3_adapter *adapter) +{ + BUG_ON(adapter->intr.type == VMXNET3_IT_AUTO || + adapter->intr.num_intrs <= 0); + + switch (adapter->intr.type) { +#ifdef CONFIG_PCI_MSI + case VMXNET3_IT_MSIX: + { + int i; + + for (i = 0; i < adapter->intr.num_intrs; i++) + free_irq(adapter->intr.msix_entries[i].vector, + adapter->netdev); + break; + } +#endif + case VMXNET3_IT_MSI: + free_irq(adapter->pdev->irq, adapter->netdev); + break; + case VMXNET3_IT_INTX: + free_irq(adapter->pdev->irq, adapter->netdev); + break; + default: + BUG_ON(true); + } +} + + +static void +vmxnet3_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp) +{ + struct vmxnet3_adapter *adapter = netdev_priv(netdev); + struct Vmxnet3_DriverShared *shared = adapter->shared; + u32 *vfTable = adapter->shared->devRead.rxFilterConf.vfTable; + + if (grp) { + /* add vlan rx stripping. */ + if (adapter->netdev->features & NETIF_F_HW_VLAN_RX) { + int i; + struct Vmxnet3_DSDevRead *devRead = &shared->devRead; + adapter->vlan_grp = grp; + + /* update FEATURES to device */ + devRead->misc.uptFeatures |= UPT1_F_RXVLAN; + VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, + VMXNET3_CMD_UPDATE_FEATURE); + /* + * Clear entire vfTable; then enable untagged pkts. + * Note: setting one entry in vfTable to non-zero turns + * on VLAN rx filtering. + */ + for (i = 0; i < VMXNET3_VFT_SIZE; i++) + vfTable[i] = 0; + + VMXNET3_SET_VFTABLE_ENTRY(vfTable, 0); + VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, + VMXNET3_CMD_UPDATE_VLAN_FILTERS); + } else { + printk(KERN_ERR "%s: vlan_rx_register when device has " + "no NETIF_F_HW_VLAN_RX\n", netdev->name); + } + } else { + /* remove vlan rx stripping. */ + struct Vmxnet3_DSDevRead *devRead = &shared->devRead; + adapter->vlan_grp = NULL; + + if (devRead->misc.uptFeatures & UPT1_F_RXVLAN) { + int i; + + for (i = 0; i < VMXNET3_VFT_SIZE; i++) { + /* clear entire vfTable; this also disables + * VLAN rx filtering + */ + vfTable[i] = 0; + } + VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, + VMXNET3_CMD_UPDATE_VLAN_FILTERS); + + /* update FEATURES to device */ + devRead->misc.uptFeatures &= ~UPT1_F_RXVLAN; + VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, + VMXNET3_CMD_UPDATE_FEATURE); + } + } +} + + +static void +vmxnet3_restore_vlan(struct vmxnet3_adapter *adapter) +{ + if (adapter->vlan_grp) { + u16 vid; + u32 *vfTable = adapter->shared->devRead.rxFilterConf.vfTable; + bool activeVlan = false; + + for (vid = 0; vid < VLAN_GROUP_ARRAY_LEN; vid++) { + if (vlan_group_get_device(adapter->vlan_grp, vid)) { + VMXNET3_SET_VFTABLE_ENTRY(vfTable, vid); + activeVlan = true; + } + } + if (activeVlan) { + /* continue to allow untagged pkts */ + VMXNET3_SET_VFTABLE_ENTRY(vfTable, 0); + } + } +} + + +static void +vmxnet3_vlan_rx_add_vid(struct net_device *netdev, u16 vid) +{ + struct vmxnet3_adapter *adapter = netdev_priv(netdev); + u32 *vfTable = adapter->shared->devRead.rxFilterConf.vfTable; + + VMXNET3_SET_VFTABLE_ENTRY(vfTable, vid); + VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, + VMXNET3_CMD_UPDATE_VLAN_FILTERS); +} + + +static void +vmxnet3_vlan_rx_kill_vid(struct net_device *netdev, u16 vid) +{ + struct vmxnet3_adapter *adapter = netdev_priv(netdev); + u32 *vfTable = adapter->shared->devRead.rxFilterConf.vfTable; + + VMXNET3_CLEAR_VFTABLE_ENTRY(vfTable, vid); + VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, + VMXNET3_CMD_UPDATE_VLAN_FILTERS); +} + + +static u8 * +vmxnet3_copy_mc(struct net_device *netdev) +{ + u8 *buf = NULL; + u32 sz = netdev->mc_count * ETH_ALEN; + + /* struct Vmxnet3_RxFilterConf.mfTableLen is u16. */ + if (sz <= 0xffff) { + /* We may be called with BH disabled */ + buf = kmalloc(sz, GFP_ATOMIC); + if (buf) { + int i; + struct dev_mc_list *mc = netdev->mc_list; + + for (i = 0; i < netdev->mc_count; i++) { + BUG_ON(!mc); + memcpy(buf + i * ETH_ALEN, mc->dmi_addr, + ETH_ALEN); + mc = mc->next; + } + } + } + return buf; +} + + +static void +vmxnet3_set_mc(struct net_device *netdev) +{ + struct vmxnet3_adapter *adapter = netdev_priv(netdev); + struct Vmxnet3_RxFilterConf *rxConf = + &adapter->shared->devRead.rxFilterConf; + u8 *new_table = NULL; + u32 new_mode = VMXNET3_RXM_UCAST; + + if (netdev->flags & IFF_PROMISC) + new_mode |= VMXNET3_RXM_PROMISC; + + if (netdev->flags & IFF_BROADCAST) + new_mode |= VMXNET3_RXM_BCAST; + + if (netdev->flags & IFF_ALLMULTI) + new_mode |= VMXNET3_RXM_ALL_MULTI; + else + if (netdev->mc_count > 0) { + new_table = vmxnet3_copy_mc(netdev); + if (new_table) { + new_mode |= VMXNET3_RXM_MCAST; + rxConf->mfTableLen = netdev->mc_count * + ETH_ALEN; + rxConf->mfTablePA = virt_to_phys(new_table); + } else { + printk(KERN_INFO "%s: failed to copy mcast list" + ", setting ALL_MULTI\n", netdev->name); + new_mode |= VMXNET3_RXM_ALL_MULTI; + } + } + + + if (!(new_mode & VMXNET3_RXM_MCAST)) { + rxConf->mfTableLen = 0; + rxConf->mfTablePA = 0; + } + + if (new_mode != rxConf->rxMode) { + rxConf->rxMode = new_mode; + VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, + VMXNET3_CMD_UPDATE_RX_MODE); + } + + VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, + VMXNET3_CMD_UPDATE_MAC_FILTERS); + + kfree(new_table); +} + + +/* + * Set up driver_shared based on settings in adapter. + */ + +static void +vmxnet3_setup_driver_shared(struct vmxnet3_adapter *adapter) +{ + struct Vmxnet3_DriverShared *shared = adapter->shared; + struct Vmxnet3_DSDevRead *devRead = &shared->devRead; + struct Vmxnet3_TxQueueConf *tqc; + struct Vmxnet3_RxQueueConf *rqc; + int i; + + memset(shared, 0, sizeof(*shared)); + + /* driver settings */ + shared->magic = VMXNET3_REV1_MAGIC; + devRead->misc.driverInfo.version = VMXNET3_DRIVER_VERSION_NUM; + devRead->misc.driverInfo.gos.gosBits = (sizeof(void *) == 4 ? + VMXNET3_GOS_BITS_32 : VMXNET3_GOS_BITS_64); + devRead->misc.driverInfo.gos.gosType = VMXNET3_GOS_TYPE_LINUX; + devRead->misc.driverInfo.vmxnet3RevSpt = 1; + devRead->misc.driverInfo.uptVerSpt = 1; + + devRead->misc.ddPA = virt_to_phys(adapter); + devRead->misc.ddLen = sizeof(struct vmxnet3_adapter); + + /* set up feature flags */ + if (adapter->rxcsum) + devRead->misc.uptFeatures |= UPT1_F_RXCSUM; + + if (adapter->lro) { + devRead->misc.uptFeatures |= UPT1_F_LRO; + devRead->misc.maxNumRxSG = 1 + MAX_SKB_FRAGS; + } + if ((adapter->netdev->features & NETIF_F_HW_VLAN_RX) + && adapter->vlan_grp) { + devRead->misc.uptFeatures |= UPT1_F_RXVLAN; + } + + devRead->misc.mtu = adapter->netdev->mtu; + devRead->misc.queueDescPA = adapter->queue_desc_pa; + devRead->misc.queueDescLen = sizeof(struct Vmxnet3_TxQueueDesc) + + sizeof(struct Vmxnet3_RxQueueDesc); + + /* tx queue settings */ + BUG_ON(adapter->tx_queue.tx_ring.base == NULL); + + devRead->misc.numTxQueues = 1; + tqc = &adapter->tqd_start->conf; + tqc->txRingBasePA = adapter->tx_queue.tx_ring.basePA; + tqc->dataRingBasePA = adapter->tx_queue.data_ring.basePA; + tqc->compRingBasePA = adapter->tx_queue.comp_ring.basePA; + tqc->ddPA = virt_to_phys(adapter->tx_queue.buf_info); + tqc->txRingSize = adapter->tx_queue.tx_ring.size; + tqc->dataRingSize = adapter->tx_queue.data_ring.size; + tqc->compRingSize = adapter->tx_queue.comp_ring.size; + tqc->ddLen = sizeof(struct vmxnet3_tx_buf_info) * + tqc->txRingSize; + tqc->intrIdx = adapter->tx_queue.comp_ring.intr_idx; + + /* rx queue settings */ + devRead->misc.numRxQueues = 1; + rqc = &adapter->rqd_start->conf; + rqc->rxRingBasePA[0] = adapter->rx_queue.rx_ring[0].basePA; + rqc->rxRingBasePA[1] = adapter->rx_queue.rx_ring[1].basePA; + rqc->compRingBasePA = adapter->rx_queue.comp_ring.basePA; + rqc->ddPA = virt_to_phys(adapter->rx_queue.buf_info); + rqc->rxRingSize[0] = adapter->rx_queue.rx_ring[0].size; + rqc->rxRingSize[1] = adapter->rx_queue.rx_ring[1].size; + rqc->compRingSize = adapter->rx_queue.comp_ring.size; + rqc->ddLen = sizeof(struct vmxnet3_rx_buf_info) * + (rqc->rxRingSize[0] + rqc->rxRingSize[1]); + rqc->intrIdx = adapter->rx_queue.comp_ring.intr_idx; + + /* intr settings */ + devRead->intrConf.autoMask = adapter->intr.mask_mode == + VMXNET3_IMM_AUTO; + devRead->intrConf.numIntrs = adapter->intr.num_intrs; + for (i = 0; i < adapter->intr.num_intrs; i++) + devRead->intrConf.modLevels[i] = adapter->intr.mod_levels[i]; + + devRead->intrConf.eventIntrIdx = adapter->intr.event_intr_idx; + + /* rx filter settings */ + devRead->rxFilterConf.rxMode = 0; + vmxnet3_restore_vlan(adapter); + /* the rest are already zeroed */ +} + + +int +vmxnet3_activate_dev(struct vmxnet3_adapter *adapter) +{ + int err; + u32 ret; + + dprintk(KERN_ERR "%s: skb_buf_size %d, rx_buf_per_pkt %d, ring sizes" + " %u %u %u\n", adapter->netdev->name, adapter->skb_buf_size, + adapter->rx_buf_per_pkt, adapter->tx_queue.tx_ring.size, + adapter->rx_queue.rx_ring[0].size, + adapter->rx_queue.rx_ring[1].size); + + vmxnet3_tq_init(&adapter->tx_queue, adapter); + err = vmxnet3_rq_init(&adapter->rx_queue, adapter); + if (err) { + printk(KERN_ERR "Failed to init rx queue for %s: error %d\n", + adapter->netdev->name, err); + goto rq_err; + } + + err = vmxnet3_request_irqs(adapter); + if (err) { + printk(KERN_ERR "Failed to setup irq for %s: error %d\n", + adapter->netdev->name, err); + goto irq_err; + } + + vmxnet3_setup_driver_shared(adapter); + + VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_DSAL, + VMXNET3_GET_ADDR_LO(adapter->shared_pa)); + VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_DSAH, + VMXNET3_GET_ADDR_HI(adapter->shared_pa)); + + VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, + VMXNET3_CMD_ACTIVATE_DEV); + ret = VMXNET3_READ_BAR1_REG(adapter, VMXNET3_REG_CMD); + + if (ret != 0) { + printk(KERN_ERR "Failed to activate dev %s: error %u\n", + adapter->netdev->name, ret); + err = -EINVAL; + goto activate_err; + } + VMXNET3_WRITE_BAR0_REG(adapter, VMXNET3_REG_RXPROD, + adapter->rx_queue.rx_ring[0].next2fill); + VMXNET3_WRITE_BAR0_REG(adapter, VMXNET3_REG_RXPROD2, + adapter->rx_queue.rx_ring[1].next2fill); + + /* Apply the rx filter settins last. */ + vmxnet3_set_mc(adapter->netdev); + + /* + * Check link state when first activating device. It will start the + * tx queue if the link is up. + */ + vmxnet3_check_link(adapter); + + napi_enable(&adapter->napi); + vmxnet3_enable_all_intrs(adapter); + clear_bit(VMXNET3_STATE_BIT_QUIESCED, &adapter->state); + return 0; + +activate_err: + VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_DSAL, 0); + VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_DSAH, 0); + vmxnet3_free_irqs(adapter); +irq_err: +rq_err: + /* free up buffers we allocated */ + vmxnet3_rq_cleanup(&adapter->rx_queue, adapter); + return err; +} + + +void +vmxnet3_reset_dev(struct vmxnet3_adapter *adapter) +{ + VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, VMXNET3_CMD_RESET_DEV); +} + + +int +vmxnet3_quiesce_dev(struct vmxnet3_adapter *adapter) +{ + if (test_and_set_bit(VMXNET3_STATE_BIT_QUIESCED, &adapter->state)) + return 0; + + + VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, + VMXNET3_CMD_QUIESCE_DEV); + vmxnet3_disable_all_intrs(adapter); + + napi_disable(&adapter->napi); + netif_tx_disable(adapter->netdev); + adapter->link_speed = 0; + netif_carrier_off(adapter->netdev); + + vmxnet3_tq_cleanup(&adapter->tx_queue, adapter); + vmxnet3_rq_cleanup(&adapter->rx_queue, adapter); + vmxnet3_free_irqs(adapter); + return 0; +} + + +static void +vmxnet3_write_mac_addr(struct vmxnet3_adapter *adapter, u8 *mac) +{ + u32 tmp; + + tmp = *(u32 *)mac; + VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_MACL, tmp); + + tmp = (mac[5] << 8) | mac[4]; + VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_MACH, tmp); +} + + +static int +vmxnet3_set_mac_addr(struct net_device *netdev, void *p) +{ + struct sockaddr *addr = p; + struct vmxnet3_adapter *adapter = netdev_priv(netdev); + + memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); + vmxnet3_write_mac_addr(adapter, addr->sa_data); + + return 0; +} + + +/* ==================== initialization and cleanup routines ============ */ + +static int +vmxnet3_alloc_pci_resources(struct vmxnet3_adapter *adapter, bool *dma64) +{ + int err; + unsigned long mmio_start, mmio_len; + struct pci_dev *pdev = adapter->pdev; + + err = pci_enable_device(pdev); + if (err) { + printk(KERN_ERR "Failed to enable adapter %s: error %d\n", + pci_name(pdev), err); + return err; + } + + if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) == 0) { + if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)) != 0) { + printk(KERN_ERR "pci_set_consistent_dma_mask failed " + "for adapter %s\n", pci_name(pdev)); + err = -EIO; + goto err_set_mask; + } + *dma64 = true; + } else { + if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0) { + printk(KERN_ERR "pci_set_dma_mask failed for adapter " + "%s\n", pci_name(pdev)); + err = -EIO; + goto err_set_mask; + } + *dma64 = false; + } + + err = pci_request_selected_regions(pdev, (1 << 2) - 1, + vmxnet3_driver_name); + if (err) { + printk(KERN_ERR "Failed to request region for adapter %s: " + "error %d\n", pci_name(pdev), err); + goto err_set_mask; + } + + pci_set_master(pdev); + + mmio_start = pci_resource_start(pdev, 0); + mmio_len = pci_resource_len(pdev, 0); + adapter->hw_addr0 = ioremap(mmio_start, mmio_len); + if (!adapter->hw_addr0) { + printk(KERN_ERR "Failed to map bar0 for adapter %s\n", + pci_name(pdev)); + err = -EIO; + goto err_ioremap; + } + + mmio_start = pci_resource_start(pdev, 1); + mmio_len = pci_resource_len(pdev, 1); + adapter->hw_addr1 = ioremap(mmio_start, mmio_len); + if (!adapter->hw_addr1) { + printk(KERN_ERR "Failed to map bar1 for adapter %s\n", + pci_name(pdev)); + err = -EIO; + goto err_bar1; + } + return 0; + +err_bar1: + iounmap(adapter->hw_addr0); +err_ioremap: + pci_release_selected_regions(pdev, (1 << 2) - 1); +err_set_mask: + pci_disable_device(pdev); + return err; +} + + +static void +vmxnet3_free_pci_resources(struct vmxnet3_adapter *adapter) +{ + BUG_ON(!adapter->pdev); + + iounmap(adapter->hw_addr0); + iounmap(adapter->hw_addr1); + pci_release_selected_regions(adapter->pdev, (1 << 2) - 1); + pci_disable_device(adapter->pdev); +} + + +static void +vmxnet3_adjust_rx_ring_size(struct vmxnet3_adapter *adapter) +{ + size_t sz; + + if (adapter->netdev->mtu <= VMXNET3_MAX_SKB_BUF_SIZE - + VMXNET3_MAX_ETH_HDR_SIZE) { + adapter->skb_buf_size = adapter->netdev->mtu + + VMXNET3_MAX_ETH_HDR_SIZE; + if (adapter->skb_buf_size < VMXNET3_MIN_T0_BUF_SIZE) + adapter->skb_buf_size = VMXNET3_MIN_T0_BUF_SIZE; + + adapter->rx_buf_per_pkt = 1; + } else { + adapter->skb_buf_size = VMXNET3_MAX_SKB_BUF_SIZE; + sz = adapter->netdev->mtu - VMXNET3_MAX_SKB_BUF_SIZE + + VMXNET3_MAX_ETH_HDR_SIZE; + adapter->rx_buf_per_pkt = 1 + (sz + PAGE_SIZE - 1) / PAGE_SIZE; + } + + /* + * for simplicity, force the ring0 size to be a multiple of + * rx_buf_per_pkt * VMXNET3_RING_SIZE_ALIGN + */ + sz = adapter->rx_buf_per_pkt * VMXNET3_RING_SIZE_ALIGN; + adapter->rx_queue.rx_ring[0].size = (adapter->rx_queue.rx_ring[0].size + + sz - 1) / sz * sz; + adapter->rx_queue.rx_ring[0].size = min_t(u32, + adapter->rx_queue.rx_ring[0].size, + VMXNET3_RX_RING_MAX_SIZE / sz * sz); +} + + +int +vmxnet3_create_queues(struct vmxnet3_adapter *adapter, u32 tx_ring_size, + u32 rx_ring_size, u32 rx_ring2_size) +{ + int err; + + adapter->tx_queue.tx_ring.size = tx_ring_size; + adapter->tx_queue.data_ring.size = tx_ring_size; + adapter->tx_queue.comp_ring.size = tx_ring_size; + adapter->tx_queue.shared = &adapter->tqd_start->ctrl; + adapter->tx_queue.stopped = true; + err = vmxnet3_tq_create(&adapter->tx_queue, adapter); + if (err) + return err; + + adapter->rx_queue.rx_ring[0].size = rx_ring_size; + adapter->rx_queue.rx_ring[1].size = rx_ring2_size; + vmxnet3_adjust_rx_ring_size(adapter); + adapter->rx_queue.comp_ring.size = adapter->rx_queue.rx_ring[0].size + + adapter->rx_queue.rx_ring[1].size; + adapter->rx_queue.qid = 0; + adapter->rx_queue.qid2 = 1; + adapter->rx_queue.shared = &adapter->rqd_start->ctrl; + err = vmxnet3_rq_create(&adapter->rx_queue, adapter); + if (err) + vmxnet3_tq_destroy(&adapter->tx_queue, adapter); + + return err; +} + +static int +vmxnet3_open(struct net_device *netdev) +{ + struct vmxnet3_adapter *adapter; + int err; + + adapter = netdev_priv(netdev); + + spin_lock_init(&adapter->tx_queue.tx_lock); + + err = vmxnet3_create_queues(adapter, VMXNET3_DEF_TX_RING_SIZE, + VMXNET3_DEF_RX_RING_SIZE, + VMXNET3_DEF_RX_RING_SIZE); + if (err) + goto queue_err; + + err = vmxnet3_activate_dev(adapter); + if (err) + goto activate_err; + + return 0; + +activate_err: + vmxnet3_rq_destroy(&adapter->rx_queue, adapter); + vmxnet3_tq_destroy(&adapter->tx_queue, adapter); +queue_err: + return err; +} + + +static int +vmxnet3_close(struct net_device *netdev) +{ + struct vmxnet3_adapter *adapter = netdev_priv(netdev); + + /* + * Reset_work may be in the middle of resetting the device, wait for its + * completion. + */ + while (test_and_set_bit(VMXNET3_STATE_BIT_RESETTING, &adapter->state)) + msleep(1); + + vmxnet3_quiesce_dev(adapter); + + vmxnet3_rq_destroy(&adapter->rx_queue, adapter); + vmxnet3_tq_destroy(&adapter->tx_queue, adapter); + + clear_bit(VMXNET3_STATE_BIT_RESETTING, &adapter->state); + + + return 0; +} + + +void +vmxnet3_force_close(struct vmxnet3_adapter *adapter) +{ + /* + * we must clear VMXNET3_STATE_BIT_RESETTING, otherwise + * vmxnet3_close() will deadlock. + */ + BUG_ON(test_bit(VMXNET3_STATE_BIT_RESETTING, &adapter->state)); + + /* we need to enable NAPI, otherwise dev_close will deadlock */ + napi_enable(&adapter->napi); + dev_close(adapter->netdev); +} + + +static int +vmxnet3_change_mtu(struct net_device *netdev, int new_mtu) +{ + struct vmxnet3_adapter *adapter = netdev_priv(netdev); + int err = 0; + + if (new_mtu < VMXNET3_MIN_MTU || new_mtu > VMXNET3_MAX_MTU) + return -EINVAL; + + if (new_mtu > 1500 && !adapter->jumbo_frame) + return -EINVAL; + + netdev->mtu = new_mtu; + + /* + * Reset_work may be in the middle of resetting the device, wait for its + * completion. + */ + while (test_and_set_bit(VMXNET3_STATE_BIT_RESETTING, &adapter->state)) + msleep(1); + + if (netif_running(netdev)) { + vmxnet3_quiesce_dev(adapter); + vmxnet3_reset_dev(adapter); + + /* we need to re-create the rx queue based on the new mtu */ + vmxnet3_rq_destroy(&adapter->rx_queue, adapter); + vmxnet3_adjust_rx_ring_size(adapter); + adapter->rx_queue.comp_ring.size = + adapter->rx_queue.rx_ring[0].size + + adapter->rx_queue.rx_ring[1].size; + err = vmxnet3_rq_create(&adapter->rx_queue, adapter); + if (err) { + printk(KERN_ERR "%s: failed to re-create rx queue," + " error %d. Closing it.\n", netdev->name, err); + goto out; + } + + err = vmxnet3_activate_dev(adapter); + if (err) { + printk(KERN_ERR "%s: failed to re-activate, error %d. " + "Closing it\n", netdev->name, err); + goto out; + } + } + +out: + clear_bit(VMXNET3_STATE_BIT_RESETTING, &adapter->state); + if (err) + vmxnet3_force_close(adapter); + + return err; +} + + +static void +vmxnet3_declare_features(struct vmxnet3_adapter *adapter, bool dma64) +{ + struct net_device *netdev = adapter->netdev; + + netdev->features = NETIF_F_SG | + NETIF_F_HW_CSUM | + NETIF_F_HW_VLAN_TX | + NETIF_F_HW_VLAN_RX | + NETIF_F_HW_VLAN_FILTER | + NETIF_F_TSO | + NETIF_F_TSO6 | + NETIF_F_LRO; + + printk(KERN_INFO "features: sg csum vlan jf tso tsoIPv6 lro"); + + adapter->rxcsum = true; + adapter->jumbo_frame = true; + adapter->lro = true; + + if (dma64) { + netdev->features |= NETIF_F_HIGHDMA; + printk(" highDMA"); + } + + netdev->vlan_features = netdev->features; + printk("\n"); +} + + +static void +vmxnet3_read_mac_addr(struct vmxnet3_adapter *adapter, u8 *mac) +{ + u32 tmp; + + tmp = VMXNET3_READ_BAR1_REG(adapter, VMXNET3_REG_MACL); + *(u32 *)mac = tmp; + + tmp = VMXNET3_READ_BAR1_REG(adapter, VMXNET3_REG_MACH); + mac[4] = tmp & 0xff; + mac[5] = (tmp >> 8) & 0xff; +} + + +static void +vmxnet3_alloc_intr_resources(struct vmxnet3_adapter *adapter) +{ + u32 cfg; + + /* intr settings */ + VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, + VMXNET3_CMD_GET_CONF_INTR); + cfg = VMXNET3_READ_BAR1_REG(adapter, VMXNET3_REG_CMD); + adapter->intr.type = cfg & 0x3; + adapter->intr.mask_mode = (cfg >> 2) & 0x3; + + if (adapter->intr.type == VMXNET3_IT_AUTO) { + int err; + +#ifdef CONFIG_PCI_MSI + adapter->intr.msix_entries[0].entry = 0; + err = pci_enable_msix(adapter->pdev, adapter->intr.msix_entries, + VMXNET3_LINUX_MAX_MSIX_VECT); + if (!err) { + adapter->intr.num_intrs = 1; + adapter->intr.type = VMXNET3_IT_MSIX; + return; + } +#endif + + err = pci_enable_msi(adapter->pdev); + if (!err) { + adapter->intr.num_intrs = 1; + adapter->intr.type = VMXNET3_IT_MSI; + return; + } + } + + adapter->intr.type = VMXNET3_IT_INTX; + + /* INT-X related setting */ + adapter->intr.num_intrs = 1; +} + + +static void +vmxnet3_free_intr_resources(struct vmxnet3_adapter *adapter) +{ + if (adapter->intr.type == VMXNET3_IT_MSIX) + pci_disable_msix(adapter->pdev); + else if (adapter->intr.type == VMXNET3_IT_MSI) + pci_disable_msi(adapter->pdev); + else + BUG_ON(adapter->intr.type != VMXNET3_IT_INTX); +} + + +static void +vmxnet3_tx_timeout(struct net_device *netdev) +{ + struct vmxnet3_adapter *adapter = netdev_priv(netdev); + adapter->tx_timeout_count++; + + printk(KERN_ERR "%s: tx hang\n", adapter->netdev->name); + schedule_work(&adapter->work); +} + + +static void +vmxnet3_reset_work(struct work_struct *data) +{ + struct vmxnet3_adapter *adapter; + + adapter = container_of(data, struct vmxnet3_adapter, work); + + /* if another thread is resetting the device, no need to proceed */ + if (test_and_set_bit(VMXNET3_STATE_BIT_RESETTING, &adapter->state)) + return; + + /* if the device is closed, we must leave it alone */ + if (netif_running(adapter->netdev)) { + printk(KERN_INFO "%s: resetting\n", adapter->netdev->name); + vmxnet3_quiesce_dev(adapter); + vmxnet3_reset_dev(adapter); + vmxnet3_activate_dev(adapter); + } else { + printk(KERN_INFO "%s: already closed\n", adapter->netdev->name); + } + + clear_bit(VMXNET3_STATE_BIT_RESETTING, &adapter->state); +} + + +static int __devinit +vmxnet3_probe_device(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + static const struct net_device_ops vmxnet3_netdev_ops = { + .ndo_open = vmxnet3_open, + .ndo_stop = vmxnet3_close, + .ndo_start_xmit = vmxnet3_xmit_frame, + .ndo_set_mac_address = vmxnet3_set_mac_addr, + .ndo_change_mtu = vmxnet3_change_mtu, + .ndo_get_stats = vmxnet3_get_stats, + .ndo_tx_timeout = vmxnet3_tx_timeout, + .ndo_set_multicast_list = vmxnet3_set_mc, + .ndo_vlan_rx_register = vmxnet3_vlan_rx_register, + .ndo_vlan_rx_add_vid = vmxnet3_vlan_rx_add_vid, + .ndo_vlan_rx_kill_vid = vmxnet3_vlan_rx_kill_vid, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = vmxnet3_netpoll, +#endif + }; + int err; + bool dma64 = false; /* stupid gcc */ + u32 ver; + struct net_device *netdev; + struct vmxnet3_adapter *adapter; + u8 mac[ETH_ALEN]; + + netdev = alloc_etherdev(sizeof(struct vmxnet3_adapter)); + if (!netdev) { + printk(KERN_ERR "Failed to alloc ethernet device for adapter " + "%s\n", pci_name(pdev)); + return -ENOMEM; + } + + pci_set_drvdata(pdev, netdev); + adapter = netdev_priv(netdev); + adapter->netdev = netdev; + adapter->pdev = pdev; + + adapter->shared = pci_alloc_consistent(adapter->pdev, + sizeof(struct Vmxnet3_DriverShared), + &adapter->shared_pa); + if (!adapter->shared) { + printk(KERN_ERR "Failed to allocate memory for %s\n", + pci_name(pdev)); + err = -ENOMEM; + goto err_alloc_shared; + } + + adapter->tqd_start = pci_alloc_consistent(adapter->pdev, + sizeof(struct Vmxnet3_TxQueueDesc) + + sizeof(struct Vmxnet3_RxQueueDesc), + &adapter->queue_desc_pa); + + if (!adapter->tqd_start) { + printk(KERN_ERR "Failed to allocate memory for %s\n", + pci_name(pdev)); + err = -ENOMEM; + goto err_alloc_queue_desc; + } + adapter->rqd_start = (struct Vmxnet3_RxQueueDesc *)(adapter->tqd_start + + 1); + + adapter->pm_conf = kmalloc(sizeof(struct Vmxnet3_PMConf), GFP_KERNEL); + if (adapter->pm_conf == NULL) { + printk(KERN_ERR "Failed to allocate memory for %s\n", + pci_name(pdev)); + err = -ENOMEM; + goto err_alloc_pm; + } + + err = vmxnet3_alloc_pci_resources(adapter, &dma64); + if (err < 0) + goto err_alloc_pci; + + ver = VMXNET3_READ_BAR1_REG(adapter, VMXNET3_REG_VRRS); + if (ver & 1) { + VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_VRRS, 1); + } else { + printk(KERN_ERR "Incompatible h/w version (0x%x) for adapter" + " %s\n", ver, pci_name(pdev)); + err = -EBUSY; + goto err_ver; + } + + ver = VMXNET3_READ_BAR1_REG(adapter, VMXNET3_REG_UVRS); + if (ver & 1) { + VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_UVRS, 1); + } else { + printk(KERN_ERR "Incompatible upt version (0x%x) for " + "adapter %s\n", ver, pci_name(pdev)); + err = -EBUSY; + goto err_ver; + } + + vmxnet3_declare_features(adapter, dma64); + + adapter->dev_number = atomic_read(&devices_found); + vmxnet3_alloc_intr_resources(adapter); + + vmxnet3_read_mac_addr(adapter, mac); + memcpy(netdev->dev_addr, mac, netdev->addr_len); + + netdev->netdev_ops = &vmxnet3_netdev_ops; + netdev->watchdog_timeo = 5 * HZ; + vmxnet3_set_ethtool_ops(netdev); + + INIT_WORK(&adapter->work, vmxnet3_reset_work); + + netif_napi_add(netdev, &adapter->napi, vmxnet3_poll, 64); + SET_NETDEV_DEV(netdev, &pdev->dev); + err = register_netdev(netdev); + + if (err) { + printk(KERN_ERR "Failed to register adapter %s\n", + pci_name(pdev)); + goto err_register; + } + + set_bit(VMXNET3_STATE_BIT_QUIESCED, &adapter->state); + atomic_inc(&devices_found); + return 0; + +err_register: + vmxnet3_free_intr_resources(adapter); +err_ver: + vmxnet3_free_pci_resources(adapter); +err_alloc_pci: + kfree(adapter->pm_conf); +err_alloc_pm: + pci_free_consistent(adapter->pdev, sizeof(struct Vmxnet3_TxQueueDesc) + + sizeof(struct Vmxnet3_RxQueueDesc), + adapter->tqd_start, adapter->queue_desc_pa); +err_alloc_queue_desc: + pci_free_consistent(adapter->pdev, sizeof(struct Vmxnet3_DriverShared), + adapter->shared, adapter->shared_pa); +err_alloc_shared: + pci_set_drvdata(pdev, NULL); + free_netdev(netdev); + return err; +} + + +static void __devexit +vmxnet3_remove_device(struct pci_dev *pdev) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct vmxnet3_adapter *adapter = netdev_priv(netdev); + + flush_scheduled_work(); + + unregister_netdev(netdev); + + vmxnet3_free_intr_resources(adapter); + vmxnet3_free_pci_resources(adapter); + kfree(adapter->pm_conf); + pci_free_consistent(adapter->pdev, sizeof(struct Vmxnet3_TxQueueDesc) + + sizeof(struct Vmxnet3_RxQueueDesc), + adapter->tqd_start, adapter->queue_desc_pa); + pci_free_consistent(adapter->pdev, sizeof(struct Vmxnet3_DriverShared), + adapter->shared, adapter->shared_pa); + free_netdev(netdev); +} + + +#ifdef CONFIG_PM + +static int +vmxnet3_suspend(struct device *device) +{ + struct pci_dev *pdev = to_pci_dev(device); + struct net_device *netdev = pci_get_drvdata(pdev); + struct vmxnet3_adapter *adapter = netdev_priv(netdev); + struct Vmxnet3_PMConf *pmConf; + struct ethhdr *ehdr; + struct arphdr *ahdr; + u8 *arpreq; + struct in_device *in_dev; + struct in_ifaddr *ifa; + int i = 0; + + if (!netif_running(netdev)) + return 0; + + vmxnet3_disable_all_intrs(adapter); + vmxnet3_free_irqs(adapter); + vmxnet3_free_intr_resources(adapter); + + netif_device_detach(netdev); + netif_stop_queue(netdev); + + /* Create wake-up filters. */ + pmConf = adapter->pm_conf; + memset(pmConf, 0, sizeof(*pmConf)); + + if (adapter->wol & WAKE_UCAST) { + pmConf->filters[i].patternSize = ETH_ALEN; + pmConf->filters[i].maskSize = 1; + memcpy(pmConf->filters[i].pattern, netdev->dev_addr, ETH_ALEN); + pmConf->filters[i].mask[0] = 0x3F; /* LSB ETH_ALEN bits */ + + pmConf->wakeUpEvents |= VMXNET3_PM_WAKEUP_FILTER; + i++; + } + + if (adapter->wol & WAKE_ARP) { + in_dev = in_dev_get(netdev); + if (!in_dev) + goto skip_arp; + + ifa = (struct in_ifaddr *)in_dev->ifa_list; + if (!ifa) + goto skip_arp; + + pmConf->filters[i].patternSize = ETH_HLEN + /* Ethernet header*/ + sizeof(struct arphdr) + /* ARP header */ + 2 * ETH_ALEN + /* 2 Ethernet addresses*/ + 2 * sizeof(u32); /*2 IPv4 addresses */ + pmConf->filters[i].maskSize = + (pmConf->filters[i].patternSize - 1) / 8 + 1; + + /* ETH_P_ARP in Ethernet header. */ + ehdr = (struct ethhdr *)pmConf->filters[i].pattern; + ehdr->h_proto = htons(ETH_P_ARP); + + /* ARPOP_REQUEST in ARP header. */ + ahdr = (struct arphdr *)&pmConf->filters[i].pattern[ETH_HLEN]; + ahdr->ar_op = htons(ARPOP_REQUEST); + arpreq = (u8 *)(ahdr + 1); + + /* The Unicast IPv4 address in 'tip' field. */ + arpreq += 2 * ETH_ALEN + sizeof(u32); + *(u32 *)arpreq = ifa->ifa_address; + + /* The mask for the relevant bits. */ + pmConf->filters[i].mask[0] = 0x00; + pmConf->filters[i].mask[1] = 0x30; /* ETH_P_ARP */ + pmConf->filters[i].mask[2] = 0x30; /* ARPOP_REQUEST */ + pmConf->filters[i].mask[3] = 0x00; + pmConf->filters[i].mask[4] = 0xC0; /* IPv4 TIP */ + pmConf->filters[i].mask[5] = 0x03; /* IPv4 TIP */ + in_dev_put(in_dev); + + pmConf->wakeUpEvents |= VMXNET3_PM_WAKEUP_FILTER; + i++; + } + +skip_arp: + if (adapter->wol & WAKE_MAGIC) + pmConf->wakeUpEvents |= VMXNET3_PM_WAKEUP_MAGIC; + + pmConf->numFilters = i; + + adapter->shared->devRead.pmConfDesc.confVer = 1; + adapter->shared->devRead.pmConfDesc.confLen = sizeof(*pmConf); + adapter->shared->devRead.pmConfDesc.confPA = virt_to_phys(pmConf); + + VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, + VMXNET3_CMD_UPDATE_PMCFG); + + pci_save_state(pdev); + pci_enable_wake(pdev, pci_choose_state(pdev, PMSG_SUSPEND), + adapter->wol); + pci_disable_device(pdev); + pci_set_power_state(pdev, pci_choose_state(pdev, PMSG_SUSPEND)); + + return 0; +} + + +static int +vmxnet3_resume(struct device *device) +{ + int err; + struct pci_dev *pdev = to_pci_dev(device); + struct net_device *netdev = pci_get_drvdata(pdev); + struct vmxnet3_adapter *adapter = netdev_priv(netdev); + struct Vmxnet3_PMConf *pmConf; + + if (!netif_running(netdev)) + return 0; + + /* Destroy wake-up filters. */ + pmConf = adapter->pm_conf; + memset(pmConf, 0, sizeof(*pmConf)); + + adapter->shared->devRead.pmConfDesc.confVer = 1; + adapter->shared->devRead.pmConfDesc.confLen = sizeof(*pmConf); + adapter->shared->devRead.pmConfDesc.confPA = virt_to_phys(pmConf); + + netif_device_attach(netdev); + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + err = pci_enable_device_mem(pdev); + if (err != 0) + return err; + + pci_enable_wake(pdev, PCI_D0, 0); + + VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, + VMXNET3_CMD_UPDATE_PMCFG); + vmxnet3_alloc_intr_resources(adapter); + vmxnet3_request_irqs(adapter); + vmxnet3_enable_all_intrs(adapter); + + return 0; +} + +static struct dev_pm_ops vmxnet3_pm_ops = { + .suspend = vmxnet3_suspend, + .resume = vmxnet3_resume, +}; +#endif + +static struct pci_driver vmxnet3_driver = { + .name = vmxnet3_driver_name, + .id_table = vmxnet3_pciid_table, + .probe = vmxnet3_probe_device, + .remove = __devexit_p(vmxnet3_remove_device), +#ifdef CONFIG_PM + .driver.pm = &vmxnet3_pm_ops, +#endif +}; + + +static int __init +vmxnet3_init_module(void) +{ + printk(KERN_INFO "%s - version %s\n", VMXNET3_DRIVER_DESC, + VMXNET3_DRIVER_VERSION_REPORT); + return pci_register_driver(&vmxnet3_driver); +} + +module_init(vmxnet3_init_module); + + +static void +vmxnet3_exit_module(void) +{ + pci_unregister_driver(&vmxnet3_driver); +} + +module_exit(vmxnet3_exit_module); + +MODULE_AUTHOR("VMware, Inc."); +MODULE_DESCRIPTION(VMXNET3_DRIVER_DESC); +MODULE_LICENSE("GPL v2"); +MODULE_VERSION(VMXNET3_DRIVER_VERSION_STRING); diff --git a/drivers/net/vmxnet3/vmxnet3_ethtool.c b/drivers/net/vmxnet3/vmxnet3_ethtool.c new file mode 100644 index 000000000000..c2c15e4cafc7 --- /dev/null +++ b/drivers/net/vmxnet3/vmxnet3_ethtool.c @@ -0,0 +1,566 @@ +/* + * Linux driver for VMware's vmxnet3 ethernet NIC. + * + * Copyright (C) 2008-2009, VMware, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; version 2 of the License and no later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Maintained by: Shreyas Bhatewara <pv-drivers@vmware.com> + * + */ + + +#include "vmxnet3_int.h" + +struct vmxnet3_stat_desc { + char desc[ETH_GSTRING_LEN]; + int offset; +}; + + +static u32 +vmxnet3_get_rx_csum(struct net_device *netdev) +{ + struct vmxnet3_adapter *adapter = netdev_priv(netdev); + return adapter->rxcsum; +} + + +static int +vmxnet3_set_rx_csum(struct net_device *netdev, u32 val) +{ + struct vmxnet3_adapter *adapter = netdev_priv(netdev); + + if (adapter->rxcsum != val) { + adapter->rxcsum = val; + if (netif_running(netdev)) { + if (val) + adapter->shared->devRead.misc.uptFeatures |= + UPT1_F_RXCSUM; + else + adapter->shared->devRead.misc.uptFeatures &= + ~UPT1_F_RXCSUM; + + VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, + VMXNET3_CMD_UPDATE_FEATURE); + } + } + return 0; +} + + +/* per tq stats maintained by the device */ +static const struct vmxnet3_stat_desc +vmxnet3_tq_dev_stats[] = { + /* description, offset */ + { "TSO pkts tx", offsetof(struct UPT1_TxStats, TSOPktsTxOK) }, + { "TSO bytes tx", offsetof(struct UPT1_TxStats, TSOBytesTxOK) }, + { "ucast pkts tx", offsetof(struct UPT1_TxStats, ucastPktsTxOK) }, + { "ucast bytes tx", offsetof(struct UPT1_TxStats, ucastBytesTxOK) }, + { "mcast pkts tx", offsetof(struct UPT1_TxStats, mcastPktsTxOK) }, + { "mcast bytes tx", offsetof(struct UPT1_TxStats, mcastBytesTxOK) }, + { "bcast pkts tx", offsetof(struct UPT1_TxStats, bcastPktsTxOK) }, + { "bcast bytes tx", offsetof(struct UPT1_TxStats, bcastBytesTxOK) }, + { "pkts tx err", offsetof(struct UPT1_TxStats, pktsTxError) }, + { "pkts tx discard", offsetof(struct UPT1_TxStats, pktsTxDiscard) }, +}; + +/* per tq stats maintained by the driver */ +static const struct vmxnet3_stat_desc +vmxnet3_tq_driver_stats[] = { + /* description, offset */ + {"drv dropped tx total", offsetof(struct vmxnet3_tq_driver_stats, + drop_total) }, + { " too many frags", offsetof(struct vmxnet3_tq_driver_stats, + drop_too_many_frags) }, + { " giant hdr", offsetof(struct vmxnet3_tq_driver_stats, + drop_oversized_hdr) }, + { " hdr err", offsetof(struct vmxnet3_tq_driver_stats, + drop_hdr_inspect_err) }, + { " tso", offsetof(struct vmxnet3_tq_driver_stats, + drop_tso) }, + { "ring full", offsetof(struct vmxnet3_tq_driver_stats, + tx_ring_full) }, + { "pkts linearized", offsetof(struct vmxnet3_tq_driver_stats, + linearized) }, + { "hdr cloned", offsetof(struct vmxnet3_tq_driver_stats, + copy_skb_header) }, + { "giant hdr", offsetof(struct vmxnet3_tq_driver_stats, + oversized_hdr) }, +}; + +/* per rq stats maintained by the device */ +static const struct vmxnet3_stat_desc +vmxnet3_rq_dev_stats[] = { + { "LRO pkts rx", offsetof(struct UPT1_RxStats, LROPktsRxOK) }, + { "LRO byte rx", offsetof(struct UPT1_RxStats, LROBytesRxOK) }, + { "ucast pkts rx", offsetof(struct UPT1_RxStats, ucastPktsRxOK) }, + { "ucast bytes rx", offsetof(struct UPT1_RxStats, ucastBytesRxOK) }, + { "mcast pkts rx", offsetof(struct UPT1_RxStats, mcastPktsRxOK) }, + { "mcast bytes rx", offsetof(struct UPT1_RxStats, mcastBytesRxOK) }, + { "bcast pkts rx", offsetof(struct UPT1_RxStats, bcastPktsRxOK) }, + { "bcast bytes rx", offsetof(struct UPT1_RxStats, bcastBytesRxOK) }, + { "pkts rx out of buf", offsetof(struct UPT1_RxStats, pktsRxOutOfBuf) }, + { "pkts rx err", offsetof(struct UPT1_RxStats, pktsRxError) }, +}; + +/* per rq stats maintained by the driver */ +static const struct vmxnet3_stat_desc +vmxnet3_rq_driver_stats[] = { + /* description, offset */ + { "drv dropped rx total", offsetof(struct vmxnet3_rq_driver_stats, + drop_total) }, + { " err", offsetof(struct vmxnet3_rq_driver_stats, + drop_err) }, + { " fcs", offsetof(struct vmxnet3_rq_driver_stats, + drop_fcs) }, + { "rx buf alloc fail", offsetof(struct vmxnet3_rq_driver_stats, + rx_buf_alloc_failure) }, +}; + +/* gloabl stats maintained by the driver */ +static const struct vmxnet3_stat_desc +vmxnet3_global_stats[] = { + /* description, offset */ + { "tx timeout count", offsetof(struct vmxnet3_adapter, + tx_timeout_count) } +}; + + +struct net_device_stats * +vmxnet3_get_stats(struct net_device *netdev) +{ + struct vmxnet3_adapter *adapter; + struct vmxnet3_tq_driver_stats *drvTxStats; + struct vmxnet3_rq_driver_stats *drvRxStats; + struct UPT1_TxStats *devTxStats; + struct UPT1_RxStats *devRxStats; + struct net_device_stats *net_stats = &netdev->stats; + + adapter = netdev_priv(netdev); + + /* Collect the dev stats into the shared area */ + VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, VMXNET3_CMD_GET_STATS); + + /* Assuming that we have a single queue device */ + devTxStats = &adapter->tqd_start->stats; + devRxStats = &adapter->rqd_start->stats; + + /* Get access to the driver stats per queue */ + drvTxStats = &adapter->tx_queue.stats; + drvRxStats = &adapter->rx_queue.stats; + + memset(net_stats, 0, sizeof(*net_stats)); + + net_stats->rx_packets = devRxStats->ucastPktsRxOK + + devRxStats->mcastPktsRxOK + + devRxStats->bcastPktsRxOK; + + net_stats->tx_packets = devTxStats->ucastPktsTxOK + + devTxStats->mcastPktsTxOK + + devTxStats->bcastPktsTxOK; + + net_stats->rx_bytes = devRxStats->ucastBytesRxOK + + devRxStats->mcastBytesRxOK + + devRxStats->bcastBytesRxOK; + + net_stats->tx_bytes = devTxStats->ucastBytesTxOK + + devTxStats->mcastBytesTxOK + + devTxStats->bcastBytesTxOK; + + net_stats->rx_errors = devRxStats->pktsRxError; + net_stats->tx_errors = devTxStats->pktsTxError; + net_stats->rx_dropped = drvRxStats->drop_total; + net_stats->tx_dropped = drvTxStats->drop_total; + net_stats->multicast = devRxStats->mcastPktsRxOK; + + return net_stats; +} + +static int +vmxnet3_get_sset_count(struct net_device *netdev, int sset) +{ + switch (sset) { + case ETH_SS_STATS: + return ARRAY_SIZE(vmxnet3_tq_dev_stats) + + ARRAY_SIZE(vmxnet3_tq_driver_stats) + + ARRAY_SIZE(vmxnet3_rq_dev_stats) + + ARRAY_SIZE(vmxnet3_rq_driver_stats) + + ARRAY_SIZE(vmxnet3_global_stats); + default: + return -EOPNOTSUPP; + } +} + + +static int +vmxnet3_get_regs_len(struct net_device *netdev) +{ + return 20 * sizeof(u32); +} + + +static void +vmxnet3_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *drvinfo) +{ + struct vmxnet3_adapter *adapter = netdev_priv(netdev); + + strlcpy(drvinfo->driver, vmxnet3_driver_name, sizeof(drvinfo->driver)); + drvinfo->driver[sizeof(drvinfo->driver) - 1] = '\0'; + + strlcpy(drvinfo->version, VMXNET3_DRIVER_VERSION_REPORT, + sizeof(drvinfo->version)); + drvinfo->driver[sizeof(drvinfo->version) - 1] = '\0'; + + strlcpy(drvinfo->fw_version, "N/A", sizeof(drvinfo->fw_version)); + drvinfo->fw_version[sizeof(drvinfo->fw_version) - 1] = '\0'; + + strlcpy(drvinfo->bus_info, pci_name(adapter->pdev), + ETHTOOL_BUSINFO_LEN); + drvinfo->n_stats = vmxnet3_get_sset_count(netdev, ETH_SS_STATS); + drvinfo->testinfo_len = 0; + drvinfo->eedump_len = 0; + drvinfo->regdump_len = vmxnet3_get_regs_len(netdev); +} + + +static void +vmxnet3_get_strings(struct net_device *netdev, u32 stringset, u8 *buf) +{ + if (stringset == ETH_SS_STATS) { + int i; + + for (i = 0; i < ARRAY_SIZE(vmxnet3_tq_dev_stats); i++) { + memcpy(buf, vmxnet3_tq_dev_stats[i].desc, + ETH_GSTRING_LEN); + buf += ETH_GSTRING_LEN; + } + for (i = 0; i < ARRAY_SIZE(vmxnet3_tq_driver_stats); i++) { + memcpy(buf, vmxnet3_tq_driver_stats[i].desc, + ETH_GSTRING_LEN); + buf += ETH_GSTRING_LEN; + } + for (i = 0; i < ARRAY_SIZE(vmxnet3_rq_dev_stats); i++) { + memcpy(buf, vmxnet3_rq_dev_stats[i].desc, + ETH_GSTRING_LEN); + buf += ETH_GSTRING_LEN; + } + for (i = 0; i < ARRAY_SIZE(vmxnet3_rq_driver_stats); i++) { + memcpy(buf, vmxnet3_rq_driver_stats[i].desc, + ETH_GSTRING_LEN); + buf += ETH_GSTRING_LEN; + } + for (i = 0; i < ARRAY_SIZE(vmxnet3_global_stats); i++) { + memcpy(buf, vmxnet3_global_stats[i].desc, + ETH_GSTRING_LEN); + buf += ETH_GSTRING_LEN; + } + } +} + +static u32 +vmxnet3_get_flags(struct net_device *netdev) { + return netdev->features; +} + +static int +vmxnet3_set_flags(struct net_device *netdev, u32 data) { + struct vmxnet3_adapter *adapter = netdev_priv(netdev); + u8 lro_requested = (data & ETH_FLAG_LRO) == 0 ? 0 : 1; + u8 lro_present = (netdev->features & NETIF_F_LRO) == 0 ? 0 : 1; + + if (lro_requested ^ lro_present) { + /* toggle the LRO feature*/ + netdev->features ^= NETIF_F_LRO; + + /* update harware LRO capability accordingly */ + if (lro_requested) + adapter->shared->devRead.misc.uptFeatures &= UPT1_F_LRO; + else + adapter->shared->devRead.misc.uptFeatures &= + ~UPT1_F_LRO; + VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, + VMXNET3_CMD_UPDATE_FEATURE); + } + return 0; +} + +static void +vmxnet3_get_ethtool_stats(struct net_device *netdev, + struct ethtool_stats *stats, u64 *buf) +{ + struct vmxnet3_adapter *adapter = netdev_priv(netdev); + u8 *base; + int i; + + VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, VMXNET3_CMD_GET_STATS); + + /* this does assume each counter is 64-bit wide */ + + base = (u8 *)&adapter->tqd_start->stats; + for (i = 0; i < ARRAY_SIZE(vmxnet3_tq_dev_stats); i++) + *buf++ = *(u64 *)(base + vmxnet3_tq_dev_stats[i].offset); + + base = (u8 *)&adapter->tx_queue.stats; + for (i = 0; i < ARRAY_SIZE(vmxnet3_tq_driver_stats); i++) + *buf++ = *(u64 *)(base + vmxnet3_tq_driver_stats[i].offset); + + base = (u8 *)&adapter->rqd_start->stats; + for (i = 0; i < ARRAY_SIZE(vmxnet3_rq_dev_stats); i++) + *buf++ = *(u64 *)(base + vmxnet3_rq_dev_stats[i].offset); + + base = (u8 *)&adapter->rx_queue.stats; + for (i = 0; i < ARRAY_SIZE(vmxnet3_rq_driver_stats); i++) + *buf++ = *(u64 *)(base + vmxnet3_rq_driver_stats[i].offset); + + base = (u8 *)adapter; + for (i = 0; i < ARRAY_SIZE(vmxnet3_global_stats); i++) + *buf++ = *(u64 *)(base + vmxnet3_global_stats[i].offset); +} + + +static void +vmxnet3_get_regs(struct net_device *netdev, struct ethtool_regs *regs, void *p) +{ + struct vmxnet3_adapter *adapter = netdev_priv(netdev); + u32 *buf = p; + + memset(p, 0, vmxnet3_get_regs_len(netdev)); + + regs->version = 1; + + /* Update vmxnet3_get_regs_len if we want to dump more registers */ + + /* make each ring use multiple of 16 bytes */ + buf[0] = adapter->tx_queue.tx_ring.next2fill; + buf[1] = adapter->tx_queue.tx_ring.next2comp; + buf[2] = adapter->tx_queue.tx_ring.gen; + buf[3] = 0; + + buf[4] = adapter->tx_queue.comp_ring.next2proc; + buf[5] = adapter->tx_queue.comp_ring.gen; + buf[6] = adapter->tx_queue.stopped; + buf[7] = 0; + + buf[8] = adapter->rx_queue.rx_ring[0].next2fill; + buf[9] = adapter->rx_queue.rx_ring[0].next2comp; + buf[10] = adapter->rx_queue.rx_ring[0].gen; + buf[11] = 0; + + buf[12] = adapter->rx_queue.rx_ring[1].next2fill; + buf[13] = adapter->rx_queue.rx_ring[1].next2comp; + buf[14] = adapter->rx_queue.rx_ring[1].gen; + buf[15] = 0; + + buf[16] = adapter->rx_queue.comp_ring.next2proc; + buf[17] = adapter->rx_queue.comp_ring.gen; + buf[18] = 0; + buf[19] = 0; +} + + +static void +vmxnet3_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) +{ + struct vmxnet3_adapter *adapter = netdev_priv(netdev); + + wol->supported = WAKE_UCAST | WAKE_ARP | WAKE_MAGIC; + wol->wolopts = adapter->wol; +} + + +static int +vmxnet3_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) +{ + struct vmxnet3_adapter *adapter = netdev_priv(netdev); + + if (wol->wolopts & (WAKE_PHY | WAKE_MCAST | WAKE_BCAST | + WAKE_MAGICSECURE)) { + return -EOPNOTSUPP; + } + + adapter->wol = wol->wolopts; + + device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); + + return 0; +} + + +static int +vmxnet3_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) +{ + struct vmxnet3_adapter *adapter = netdev_priv(netdev); + + ecmd->supported = SUPPORTED_10000baseT_Full | SUPPORTED_1000baseT_Full | + SUPPORTED_TP; + ecmd->advertising = ADVERTISED_TP; + ecmd->port = PORT_TP; + ecmd->transceiver = XCVR_INTERNAL; + + if (adapter->link_speed) { + ecmd->speed = adapter->link_speed; + ecmd->duplex = DUPLEX_FULL; + } else { + ecmd->speed = -1; + ecmd->duplex = -1; + } + return 0; +} + + +static void +vmxnet3_get_ringparam(struct net_device *netdev, + struct ethtool_ringparam *param) +{ + struct vmxnet3_adapter *adapter = netdev_priv(netdev); + + param->rx_max_pending = VMXNET3_RX_RING_MAX_SIZE; + param->tx_max_pending = VMXNET3_TX_RING_MAX_SIZE; + param->rx_mini_max_pending = 0; + param->rx_jumbo_max_pending = 0; + + param->rx_pending = adapter->rx_queue.rx_ring[0].size; + param->tx_pending = adapter->tx_queue.tx_ring.size; + param->rx_mini_pending = 0; + param->rx_jumbo_pending = 0; +} + + +static int +vmxnet3_set_ringparam(struct net_device *netdev, + struct ethtool_ringparam *param) +{ + struct vmxnet3_adapter *adapter = netdev_priv(netdev); + u32 new_tx_ring_size, new_rx_ring_size; + u32 sz; + int err = 0; + + if (param->tx_pending == 0 || param->tx_pending > + VMXNET3_TX_RING_MAX_SIZE) + return -EINVAL; + + if (param->rx_pending == 0 || param->rx_pending > + VMXNET3_RX_RING_MAX_SIZE) + return -EINVAL; + + + /* round it up to a multiple of VMXNET3_RING_SIZE_ALIGN */ + new_tx_ring_size = (param->tx_pending + VMXNET3_RING_SIZE_MASK) & + ~VMXNET3_RING_SIZE_MASK; + new_tx_ring_size = min_t(u32, new_tx_ring_size, + VMXNET3_TX_RING_MAX_SIZE); + if (new_tx_ring_size > VMXNET3_TX_RING_MAX_SIZE || (new_tx_ring_size % + VMXNET3_RING_SIZE_ALIGN) != 0) + return -EINVAL; + + /* ring0 has to be a multiple of + * rx_buf_per_pkt * VMXNET3_RING_SIZE_ALIGN + */ + sz = adapter->rx_buf_per_pkt * VMXNET3_RING_SIZE_ALIGN; + new_rx_ring_size = (param->rx_pending + sz - 1) / sz * sz; + new_rx_ring_size = min_t(u32, new_rx_ring_size, + VMXNET3_RX_RING_MAX_SIZE / sz * sz); + if (new_rx_ring_size > VMXNET3_RX_RING_MAX_SIZE || (new_rx_ring_size % + sz) != 0) + return -EINVAL; + + if (new_tx_ring_size == adapter->tx_queue.tx_ring.size && + new_rx_ring_size == adapter->rx_queue.rx_ring[0].size) { + return 0; + } + + /* + * Reset_work may be in the middle of resetting the device, wait for its + * completion. + */ + while (test_and_set_bit(VMXNET3_STATE_BIT_RESETTING, &adapter->state)) + msleep(1); + + if (netif_running(netdev)) { + vmxnet3_quiesce_dev(adapter); + vmxnet3_reset_dev(adapter); + + /* recreate the rx queue and the tx queue based on the + * new sizes */ + vmxnet3_tq_destroy(&adapter->tx_queue, adapter); + vmxnet3_rq_destroy(&adapter->rx_queue, adapter); + + err = vmxnet3_create_queues(adapter, new_tx_ring_size, + new_rx_ring_size, VMXNET3_DEF_RX_RING_SIZE); + if (err) { + /* failed, most likely because of OOM, try default + * size */ + printk(KERN_ERR "%s: failed to apply new sizes, try the" + " default ones\n", netdev->name); + err = vmxnet3_create_queues(adapter, + VMXNET3_DEF_TX_RING_SIZE, + VMXNET3_DEF_RX_RING_SIZE, + VMXNET3_DEF_RX_RING_SIZE); + if (err) { + printk(KERN_ERR "%s: failed to create queues " + "with default sizes. Closing it\n", + netdev->name); + goto out; + } + } + + err = vmxnet3_activate_dev(adapter); + if (err) + printk(KERN_ERR "%s: failed to re-activate, error %d." + " Closing it\n", netdev->name, err); + } + +out: + clear_bit(VMXNET3_STATE_BIT_RESETTING, &adapter->state); + if (err) + vmxnet3_force_close(adapter); + + return err; +} + + +static struct ethtool_ops vmxnet3_ethtool_ops = { + .get_settings = vmxnet3_get_settings, + .get_drvinfo = vmxnet3_get_drvinfo, + .get_regs_len = vmxnet3_get_regs_len, + .get_regs = vmxnet3_get_regs, + .get_wol = vmxnet3_get_wol, + .set_wol = vmxnet3_set_wol, + .get_link = ethtool_op_get_link, + .get_rx_csum = vmxnet3_get_rx_csum, + .set_rx_csum = vmxnet3_set_rx_csum, + .get_tx_csum = ethtool_op_get_tx_csum, + .set_tx_csum = ethtool_op_set_tx_hw_csum, + .get_sg = ethtool_op_get_sg, + .set_sg = ethtool_op_set_sg, + .get_tso = ethtool_op_get_tso, + .set_tso = ethtool_op_set_tso, + .get_strings = vmxnet3_get_strings, + .get_flags = vmxnet3_get_flags, + .set_flags = vmxnet3_set_flags, + .get_sset_count = vmxnet3_get_sset_count, + .get_ethtool_stats = vmxnet3_get_ethtool_stats, + .get_ringparam = vmxnet3_get_ringparam, + .set_ringparam = vmxnet3_set_ringparam, +}; + +void vmxnet3_set_ethtool_ops(struct net_device *netdev) +{ + SET_ETHTOOL_OPS(netdev, &vmxnet3_ethtool_ops); +} diff --git a/drivers/net/vmxnet3/vmxnet3_int.h b/drivers/net/vmxnet3/vmxnet3_int.h new file mode 100644 index 000000000000..6bb91576e999 --- /dev/null +++ b/drivers/net/vmxnet3/vmxnet3_int.h @@ -0,0 +1,389 @@ +/* + * Linux driver for VMware's vmxnet3 ethernet NIC. + * + * Copyright (C) 2008-2009, VMware, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; version 2 of the License and no later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Maintained by: Shreyas Bhatewara <pv-drivers@vmware.com> + * + */ + +#ifndef _VMXNET3_INT_H +#define _VMXNET3_INT_H + +#include <linux/types.h> +#include <linux/ethtool.h> +#include <linux/delay.h> +#include <linux/netdevice.h> +#include <linux/pci.h> +#include <linux/ethtool.h> +#include <linux/compiler.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <linux/ioport.h> +#include <linux/highmem.h> +#include <linux/init.h> +#include <linux/timer.h> +#include <linux/skbuff.h> +#include <linux/interrupt.h> +#include <linux/workqueue.h> +#include <linux/uaccess.h> +#include <asm/dma.h> +#include <asm/page.h> + +#include <linux/tcp.h> +#include <linux/udp.h> +#include <linux/ip.h> +#include <linux/ipv6.h> +#include <linux/in.h> +#include <linux/etherdevice.h> +#include <asm/checksum.h> +#include <linux/if_vlan.h> +#include <linux/if_arp.h> +#include <linux/inetdevice.h> +#include <linux/dst.h> + +#include "vmxnet3_defs.h" + +#ifdef DEBUG +# define VMXNET3_DRIVER_VERSION_REPORT VMXNET3_DRIVER_VERSION_STRING"-NAPI(debug)" +#else +# define VMXNET3_DRIVER_VERSION_REPORT VMXNET3_DRIVER_VERSION_STRING"-NAPI" +#endif + + +/* + * Version numbers + */ +#define VMXNET3_DRIVER_VERSION_STRING "1.0.5.0-k" + +/* a 32-bit int, each byte encode a verion number in VMXNET3_DRIVER_VERSION */ +#define VMXNET3_DRIVER_VERSION_NUM 0x01000500 + + +/* + * Capabilities + */ + +enum { + VMNET_CAP_SG = 0x0001, /* Can do scatter-gather transmits. */ + VMNET_CAP_IP4_CSUM = 0x0002, /* Can checksum only TCP/UDP over + * IPv4 */ + VMNET_CAP_HW_CSUM = 0x0004, /* Can checksum all packets. */ + VMNET_CAP_HIGH_DMA = 0x0008, /* Can DMA to high memory. */ + VMNET_CAP_TOE = 0x0010, /* Supports TCP/IP offload. */ + VMNET_CAP_TSO = 0x0020, /* Supports TCP Segmentation + * offload */ + VMNET_CAP_SW_TSO = 0x0040, /* Supports SW TCP Segmentation */ + VMNET_CAP_VMXNET_APROM = 0x0080, /* Vmxnet APROM support */ + VMNET_CAP_HW_TX_VLAN = 0x0100, /* Can we do VLAN tagging in HW */ + VMNET_CAP_HW_RX_VLAN = 0x0200, /* Can we do VLAN untagging in HW */ + VMNET_CAP_SW_VLAN = 0x0400, /* VLAN tagging/untagging in SW */ + VMNET_CAP_WAKE_PCKT_RCV = 0x0800, /* Can wake on network packet recv? */ + VMNET_CAP_ENABLE_INT_INLINE = 0x1000, /* Enable Interrupt Inline */ + VMNET_CAP_ENABLE_HEADER_COPY = 0x2000, /* copy header for vmkernel */ + VMNET_CAP_TX_CHAIN = 0x4000, /* Guest can use multiple tx entries + * for a pkt */ + VMNET_CAP_RX_CHAIN = 0x8000, /* pkt can span multiple rx entries */ + VMNET_CAP_LPD = 0x10000, /* large pkt delivery */ + VMNET_CAP_BPF = 0x20000, /* BPF Support in VMXNET Virtual HW*/ + VMNET_CAP_SG_SPAN_PAGES = 0x40000, /* Scatter-gather can span multiple*/ + /* pages transmits */ + VMNET_CAP_IP6_CSUM = 0x80000, /* Can do IPv6 csum offload. */ + VMNET_CAP_TSO6 = 0x100000, /* TSO seg. offload for IPv6 pkts. */ + VMNET_CAP_TSO256k = 0x200000, /* Can do TSO seg offload for */ + /* pkts up to 256kB. */ + VMNET_CAP_UPT = 0x400000 /* Support UPT */ +}; + +/* + * PCI vendor and device IDs. + */ +#define PCI_VENDOR_ID_VMWARE 0x15AD +#define PCI_DEVICE_ID_VMWARE_VMXNET3 0x07B0 +#define MAX_ETHERNET_CARDS 10 +#define MAX_PCI_PASSTHRU_DEVICE 6 + +struct vmxnet3_cmd_ring { + union Vmxnet3_GenericDesc *base; + u32 size; + u32 next2fill; + u32 next2comp; + u8 gen; + dma_addr_t basePA; +}; + +static inline void +vmxnet3_cmd_ring_adv_next2fill(struct vmxnet3_cmd_ring *ring) +{ + ring->next2fill++; + if (unlikely(ring->next2fill == ring->size)) { + ring->next2fill = 0; + VMXNET3_FLIP_RING_GEN(ring->gen); + } +} + +static inline void +vmxnet3_cmd_ring_adv_next2comp(struct vmxnet3_cmd_ring *ring) +{ + VMXNET3_INC_RING_IDX_ONLY(ring->next2comp, ring->size); +} + +static inline int +vmxnet3_cmd_ring_desc_avail(struct vmxnet3_cmd_ring *ring) +{ + return (ring->next2comp > ring->next2fill ? 0 : ring->size) + + ring->next2comp - ring->next2fill - 1; +} + +struct vmxnet3_comp_ring { + union Vmxnet3_GenericDesc *base; + u32 size; + u32 next2proc; + u8 gen; + u8 intr_idx; + dma_addr_t basePA; +}; + +static inline void +vmxnet3_comp_ring_adv_next2proc(struct vmxnet3_comp_ring *ring) +{ + ring->next2proc++; + if (unlikely(ring->next2proc == ring->size)) { + ring->next2proc = 0; + VMXNET3_FLIP_RING_GEN(ring->gen); + } +} + +struct vmxnet3_tx_data_ring { + struct Vmxnet3_TxDataDesc *base; + u32 size; + dma_addr_t basePA; +}; + +enum vmxnet3_buf_map_type { + VMXNET3_MAP_INVALID = 0, + VMXNET3_MAP_NONE, + VMXNET3_MAP_SINGLE, + VMXNET3_MAP_PAGE, +}; + +struct vmxnet3_tx_buf_info { + u32 map_type; + u16 len; + u16 sop_idx; + dma_addr_t dma_addr; + struct sk_buff *skb; +}; + +struct vmxnet3_tq_driver_stats { + u64 drop_total; /* # of pkts dropped by the driver, the + * counters below track droppings due to + * different reasons + */ + u64 drop_too_many_frags; + u64 drop_oversized_hdr; + u64 drop_hdr_inspect_err; + u64 drop_tso; + + u64 tx_ring_full; + u64 linearized; /* # of pkts linearized */ + u64 copy_skb_header; /* # of times we have to copy skb header */ + u64 oversized_hdr; +}; + +struct vmxnet3_tx_ctx { + bool ipv4; + u16 mss; + u32 eth_ip_hdr_size; /* only valid for pkts requesting tso or csum + * offloading + */ + u32 l4_hdr_size; /* only valid if mss != 0 */ + u32 copy_size; /* # of bytes copied into the data ring */ + union Vmxnet3_GenericDesc *sop_txd; + union Vmxnet3_GenericDesc *eop_txd; +}; + +struct vmxnet3_tx_queue { + spinlock_t tx_lock; + struct vmxnet3_cmd_ring tx_ring; + struct vmxnet3_tx_buf_info *buf_info; + struct vmxnet3_tx_data_ring data_ring; + struct vmxnet3_comp_ring comp_ring; + struct Vmxnet3_TxQueueCtrl *shared; + struct vmxnet3_tq_driver_stats stats; + bool stopped; + int num_stop; /* # of times the queue is + * stopped */ +} __attribute__((__aligned__(SMP_CACHE_BYTES))); + +enum vmxnet3_rx_buf_type { + VMXNET3_RX_BUF_NONE = 0, + VMXNET3_RX_BUF_SKB = 1, + VMXNET3_RX_BUF_PAGE = 2 +}; + +struct vmxnet3_rx_buf_info { + enum vmxnet3_rx_buf_type buf_type; + u16 len; + union { + struct sk_buff *skb; + struct page *page; + }; + dma_addr_t dma_addr; +}; + +struct vmxnet3_rx_ctx { + struct sk_buff *skb; + u32 sop_idx; +}; + +struct vmxnet3_rq_driver_stats { + u64 drop_total; + u64 drop_err; + u64 drop_fcs; + u64 rx_buf_alloc_failure; +}; + +struct vmxnet3_rx_queue { + struct vmxnet3_cmd_ring rx_ring[2]; + struct vmxnet3_comp_ring comp_ring; + struct vmxnet3_rx_ctx rx_ctx; + u32 qid; /* rqID in RCD for buffer from 1st ring */ + u32 qid2; /* rqID in RCD for buffer from 2nd ring */ + u32 uncommitted[2]; /* # of buffers allocated since last RXPROD + * update */ + struct vmxnet3_rx_buf_info *buf_info[2]; + struct Vmxnet3_RxQueueCtrl *shared; + struct vmxnet3_rq_driver_stats stats; +} __attribute__((__aligned__(SMP_CACHE_BYTES))); + +#define VMXNET3_LINUX_MAX_MSIX_VECT 1 + +struct vmxnet3_intr { + enum vmxnet3_intr_mask_mode mask_mode; + enum vmxnet3_intr_type type; /* MSI-X, MSI, or INTx? */ + u8 num_intrs; /* # of intr vectors */ + u8 event_intr_idx; /* idx of the intr vector for event */ + u8 mod_levels[VMXNET3_LINUX_MAX_MSIX_VECT]; /* moderation level */ +#ifdef CONFIG_PCI_MSI + struct msix_entry msix_entries[VMXNET3_LINUX_MAX_MSIX_VECT]; +#endif +}; + +#define VMXNET3_STATE_BIT_RESETTING 0 +#define VMXNET3_STATE_BIT_QUIESCED 1 +struct vmxnet3_adapter { + struct vmxnet3_tx_queue tx_queue; + struct vmxnet3_rx_queue rx_queue; + struct napi_struct napi; + struct vlan_group *vlan_grp; + + struct vmxnet3_intr intr; + + struct Vmxnet3_DriverShared *shared; + struct Vmxnet3_PMConf *pm_conf; + struct Vmxnet3_TxQueueDesc *tqd_start; /* first tx queue desc */ + struct Vmxnet3_RxQueueDesc *rqd_start; /* first rx queue desc */ + struct net_device *netdev; + struct pci_dev *pdev; + + u8 *hw_addr0; /* for BAR 0 */ + u8 *hw_addr1; /* for BAR 1 */ + + /* feature control */ + bool rxcsum; + bool lro; + bool jumbo_frame; + + /* rx buffer related */ + unsigned skb_buf_size; + int rx_buf_per_pkt; /* only apply to the 1st ring */ + dma_addr_t shared_pa; + dma_addr_t queue_desc_pa; + + /* Wake-on-LAN */ + u32 wol; + + /* Link speed */ + u32 link_speed; /* in mbps */ + + u64 tx_timeout_count; + struct work_struct work; + + unsigned long state; /* VMXNET3_STATE_BIT_xxx */ + + int dev_number; +}; + +#define VMXNET3_WRITE_BAR0_REG(adapter, reg, val) \ + writel((val), (adapter)->hw_addr0 + (reg)) +#define VMXNET3_READ_BAR0_REG(adapter, reg) \ + readl((adapter)->hw_addr0 + (reg)) + +#define VMXNET3_WRITE_BAR1_REG(adapter, reg, val) \ + writel((val), (adapter)->hw_addr1 + (reg)) +#define VMXNET3_READ_BAR1_REG(adapter, reg) \ + readl((adapter)->hw_addr1 + (reg)) + +#define VMXNET3_WAKE_QUEUE_THRESHOLD(tq) (5) +#define VMXNET3_RX_ALLOC_THRESHOLD(rq, ring_idx, adapter) \ + ((rq)->rx_ring[ring_idx].size >> 3) + +#define VMXNET3_GET_ADDR_LO(dma) ((u32)(dma)) +#define VMXNET3_GET_ADDR_HI(dma) ((u32)(((u64)(dma)) >> 32)) + +/* must be a multiple of VMXNET3_RING_SIZE_ALIGN */ +#define VMXNET3_DEF_TX_RING_SIZE 512 +#define VMXNET3_DEF_RX_RING_SIZE 256 + +#define VMXNET3_MAX_ETH_HDR_SIZE 22 +#define VMXNET3_MAX_SKB_BUF_SIZE (3*1024) + +int +vmxnet3_quiesce_dev(struct vmxnet3_adapter *adapter); + +int +vmxnet3_activate_dev(struct vmxnet3_adapter *adapter); + +void +vmxnet3_force_close(struct vmxnet3_adapter *adapter); + +void +vmxnet3_reset_dev(struct vmxnet3_adapter *adapter); + +void +vmxnet3_tq_destroy(struct vmxnet3_tx_queue *tq, + struct vmxnet3_adapter *adapter); + +void +vmxnet3_rq_destroy(struct vmxnet3_rx_queue *rq, + struct vmxnet3_adapter *adapter); + +int +vmxnet3_create_queues(struct vmxnet3_adapter *adapter, + u32 tx_ring_size, u32 rx_ring_size, u32 rx_ring2_size); + +extern void vmxnet3_set_ethtool_ops(struct net_device *netdev); +extern struct net_device_stats *vmxnet3_get_stats(struct net_device *netdev); + +extern char vmxnet3_driver_name[]; +#endif diff --git a/drivers/net/wan/c101.c b/drivers/net/wan/c101.c index 9693b0fd323d..0bd898c94759 100644 --- a/drivers/net/wan/c101.c +++ b/drivers/net/wan/c101.c @@ -16,6 +16,7 @@ #include <linux/module.h> #include <linux/kernel.h> +#include <linux/capability.h> #include <linux/slab.h> #include <linux/types.h> #include <linux/string.h> diff --git a/drivers/net/wan/cosa.c b/drivers/net/wan/cosa.c index 66360a2a14c2..e2c33c06190b 100644 --- a/drivers/net/wan/cosa.c +++ b/drivers/net/wan/cosa.c @@ -76,6 +76,7 @@ #include <linux/module.h> #include <linux/kernel.h> +#include <linux/sched.h> #include <linux/slab.h> #include <linux/poll.h> #include <linux/fs.h> diff --git a/drivers/net/wan/cycx_x25.c b/drivers/net/wan/cycx_x25.c index 2573c18b6aa5..cd8cb95c5bd7 100644 --- a/drivers/net/wan/cycx_x25.c +++ b/drivers/net/wan/cycx_x25.c @@ -84,6 +84,7 @@ #include <linux/kernel.h> /* printk(), and other useful stuff */ #include <linux/module.h> #include <linux/string.h> /* inline memset(), etc. */ +#include <linux/sched.h> #include <linux/slab.h> /* kmalloc(), kfree() */ #include <linux/stddef.h> /* offsetof(), etc. */ #include <linux/wanrouter.h> /* WAN router definitions */ diff --git a/drivers/net/wan/dscc4.c b/drivers/net/wan/dscc4.c index 81c8aec9df92..07d00b4cf48a 100644 --- a/drivers/net/wan/dscc4.c +++ b/drivers/net/wan/dscc4.c @@ -81,6 +81,7 @@ */ #include <linux/module.h> +#include <linux/sched.h> #include <linux/types.h> #include <linux/errno.h> #include <linux/list.h> diff --git a/drivers/net/wan/farsync.c b/drivers/net/wan/farsync.c index 3e90eb816181..beda387f2fc7 100644 --- a/drivers/net/wan/farsync.c +++ b/drivers/net/wan/farsync.c @@ -19,6 +19,7 @@ #include <linux/kernel.h> #include <linux/version.h> #include <linux/pci.h> +#include <linux/sched.h> #include <linux/ioport.h> #include <linux/init.h> #include <linux/if.h> diff --git a/drivers/net/wan/hdlc_cisco.c b/drivers/net/wan/hdlc_cisco.c index cf5fd17ad707..f1bff98acd1f 100644 --- a/drivers/net/wan/hdlc_cisco.c +++ b/drivers/net/wan/hdlc_cisco.c @@ -58,8 +58,7 @@ struct cisco_state { spinlock_t lock; unsigned long last_poll; int up; - int request_sent; - u32 txseq; /* TX sequence number */ + u32 txseq; /* TX sequence number, 0 = none */ u32 rxseq; /* RX sequence number */ }; @@ -163,6 +162,7 @@ static int cisco_rx(struct sk_buff *skb) struct cisco_packet *cisco_data; struct in_device *in_dev; __be32 addr, mask; + u32 ack; if (skb->len < sizeof(struct hdlc_header)) goto rx_error; @@ -223,8 +223,10 @@ static int cisco_rx(struct sk_buff *skb) case CISCO_KEEPALIVE_REQ: spin_lock(&st->lock); st->rxseq = ntohl(cisco_data->par1); - if (st->request_sent && - ntohl(cisco_data->par2) == st->txseq) { + ack = ntohl(cisco_data->par2); + if (ack && (ack == st->txseq || + /* our current REQ may be in transit */ + ack == st->txseq - 1)) { st->last_poll = jiffies; if (!st->up) { u32 sec, min, hrs, days; @@ -275,7 +277,6 @@ static void cisco_timer(unsigned long arg) cisco_keepalive_send(dev, CISCO_KEEPALIVE_REQ, htonl(++st->txseq), htonl(st->rxseq)); - st->request_sent = 1; spin_unlock(&st->lock); st->timer.expires = jiffies + st->settings.interval * HZ; @@ -293,9 +294,7 @@ static void cisco_start(struct net_device *dev) unsigned long flags; spin_lock_irqsave(&st->lock, flags); - st->up = 0; - st->request_sent = 0; - st->txseq = st->rxseq = 0; + st->up = st->txseq = st->rxseq = 0; spin_unlock_irqrestore(&st->lock, flags); init_timer(&st->timer); @@ -317,8 +316,7 @@ static void cisco_stop(struct net_device *dev) spin_lock_irqsave(&st->lock, flags); netif_dormant_on(dev); - st->up = 0; - st->request_sent = 0; + st->up = st->txseq = 0; spin_unlock_irqrestore(&st->lock, flags); } diff --git a/drivers/net/wan/n2.c b/drivers/net/wan/n2.c index 83da596e2052..58c66819f39b 100644 --- a/drivers/net/wan/n2.c +++ b/drivers/net/wan/n2.c @@ -18,6 +18,7 @@ #include <linux/module.h> #include <linux/kernel.h> +#include <linux/capability.h> #include <linux/slab.h> #include <linux/types.h> #include <linux/fcntl.h> diff --git a/drivers/net/wan/pci200syn.c b/drivers/net/wan/pci200syn.c index a52f29c72c33..f1340faaf022 100644 --- a/drivers/net/wan/pci200syn.c +++ b/drivers/net/wan/pci200syn.c @@ -16,6 +16,7 @@ #include <linux/module.h> #include <linux/kernel.h> +#include <linux/capability.h> #include <linux/slab.h> #include <linux/types.h> #include <linux/fcntl.h> diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index 49ea9c92b7e6..d7a764a2fc1a 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -31,13 +31,12 @@ config STRIP ---help--- Say Y if you have a Metricom radio and intend to use Starmode Radio IP. STRIP is a radio protocol developed for the MosquitoNet project - (on the WWW at <http://mosquitonet.stanford.edu/>) to send Internet - traffic using Metricom radios. Metricom radios are small, battery - powered, 100kbit/sec packet radio transceivers, about the size and - weight of a cellular telephone. (You may also have heard them called - "Metricom modems" but we avoid the term "modem" because it misleads - many people into thinking that you can plug a Metricom modem into a - phone line and use it as a modem.) + to send Internet traffic using Metricom radios. Metricom radios are + small, battery powered, 100kbit/sec packet radio transceivers, about + the size and weight of a cellular telephone. (You may also have heard + them called "Metricom modems" but we avoid the term "modem" because + it misleads many people into thinking that you can plug a Metricom + modem into a phone line and use it as a modem.) You can use STRIP on any Linux machine with a serial port, although it is obviously most useful for people with laptop computers. If you diff --git a/drivers/net/wireless/adm8211.h b/drivers/net/wireless/adm8211.h index 4f6ab1322189..b07e4d3a6b4d 100644 --- a/drivers/net/wireless/adm8211.h +++ b/drivers/net/wireless/adm8211.h @@ -266,7 +266,7 @@ do { \ #define ADM8211_SYNCTL_CS1 (1 << 28) #define ADM8211_SYNCTL_CAL (1 << 27) #define ADM8211_SYNCTL_SELCAL (1 << 26) -#define ADM8211_SYNCTL_RFtype ((1 << 24) || (1 << 23) || (1 << 22)) +#define ADM8211_SYNCTL_RFtype ((1 << 24) | (1 << 23) | (1 << 22)) #define ADM8211_SYNCTL_RFMD (1 << 22) #define ADM8211_SYNCTL_GENERAL (0x7 << 22) /* SYNCTL 21:0 Data (Si4126: 18-bit data, 4-bit address) */ diff --git a/drivers/net/wireless/ath/ar9170/phy.c b/drivers/net/wireless/ath/ar9170/phy.c index b3e5cf3735b0..dbd488da18b1 100644 --- a/drivers/net/wireless/ath/ar9170/phy.c +++ b/drivers/net/wireless/ath/ar9170/phy.c @@ -1141,7 +1141,8 @@ static int ar9170_set_freq_cal_data(struct ar9170 *ar, u8 vpds[2][AR5416_PD_GAIN_ICEPTS]; u8 pwrs[2][AR5416_PD_GAIN_ICEPTS]; int chain, idx, i; - u8 f; + u32 phy_data = 0; + u8 f, tmp; switch (channel->band) { case IEEE80211_BAND_2GHZ: @@ -1208,9 +1209,6 @@ static int ar9170_set_freq_cal_data(struct ar9170 *ar, } for (i = 0; i < 76; i++) { - u32 phy_data; - u8 tmp; - if (i < 25) { tmp = ar9170_interpolate_val(i, &pwrs[0][0], &vpds[0][0]); diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h index fa1549a03c71..660716214d49 100644 --- a/drivers/net/wireless/b43/b43.h +++ b/drivers/net/wireless/b43/b43.h @@ -607,82 +607,7 @@ struct b43_qos_params { struct ieee80211_tx_queue_params p; }; -struct b43_wldev; - -/* Data structure for the WLAN parts (802.11 cores) of the b43 chip. */ -struct b43_wl { - /* Pointer to the active wireless device on this chip */ - struct b43_wldev *current_dev; - /* Pointer to the ieee80211 hardware data structure */ - struct ieee80211_hw *hw; - - /* Global driver mutex. Every operation must run with this mutex locked. */ - struct mutex mutex; - /* Hard-IRQ spinlock. This lock protects things used in the hard-IRQ - * handler, only. This basically is just the IRQ mask register. */ - spinlock_t hardirq_lock; - - /* The number of queues that were registered with the mac80211 subsystem - * initially. This is a backup copy of hw->queues in case hw->queues has - * to be dynamically lowered at runtime (Firmware does not support QoS). - * hw->queues has to be restored to the original value before unregistering - * from the mac80211 subsystem. */ - u16 mac80211_initially_registered_queues; - - /* We can only have one operating interface (802.11 core) - * at a time. General information about this interface follows. - */ - - struct ieee80211_vif *vif; - /* The MAC address of the operating interface. */ - u8 mac_addr[ETH_ALEN]; - /* Current BSSID */ - u8 bssid[ETH_ALEN]; - /* Interface type. (NL80211_IFTYPE_XXX) */ - int if_type; - /* Is the card operating in AP, STA or IBSS mode? */ - bool operating; - /* filter flags */ - unsigned int filter_flags; - /* Stats about the wireless interface */ - struct ieee80211_low_level_stats ieee_stats; - -#ifdef CONFIG_B43_HWRNG - struct hwrng rng; - bool rng_initialized; - char rng_name[30 + 1]; -#endif /* CONFIG_B43_HWRNG */ - - /* List of all wireless devices on this chip */ - struct list_head devlist; - u8 nr_devs; - - bool radiotap_enabled; - bool radio_enabled; - - /* The beacon we are currently using (AP or IBSS mode). */ - struct sk_buff *current_beacon; - bool beacon0_uploaded; - bool beacon1_uploaded; - bool beacon_templates_virgin; /* Never wrote the templates? */ - struct work_struct beacon_update_trigger; - - /* The current QOS parameters for the 4 queues. */ - struct b43_qos_params qos_params[4]; - - /* Work for adjustment of the transmission power. - * This is scheduled when we determine that the actual TX output - * power doesn't match what we want. */ - struct work_struct txpower_adjust_work; - - /* Packet transmit work */ - struct work_struct tx_work; - /* Queue of packets to be transmitted. */ - struct sk_buff_head tx_queue; - - /* The device LEDs. */ - struct b43_leds leds; -}; +struct b43_wl; /* The type of the firmware file. */ enum b43_firmware_file_type { @@ -824,6 +749,97 @@ struct b43_wldev { #endif }; +/* + * Include goes here to avoid a dependency problem. + * A better fix would be to integrate xmit.h into b43.h. + */ +#include "xmit.h" + +/* Data structure for the WLAN parts (802.11 cores) of the b43 chip. */ +struct b43_wl { + /* Pointer to the active wireless device on this chip */ + struct b43_wldev *current_dev; + /* Pointer to the ieee80211 hardware data structure */ + struct ieee80211_hw *hw; + + /* Global driver mutex. Every operation must run with this mutex locked. */ + struct mutex mutex; + /* Hard-IRQ spinlock. This lock protects things used in the hard-IRQ + * handler, only. This basically is just the IRQ mask register. */ + spinlock_t hardirq_lock; + + /* The number of queues that were registered with the mac80211 subsystem + * initially. This is a backup copy of hw->queues in case hw->queues has + * to be dynamically lowered at runtime (Firmware does not support QoS). + * hw->queues has to be restored to the original value before unregistering + * from the mac80211 subsystem. */ + u16 mac80211_initially_registered_queues; + + /* We can only have one operating interface (802.11 core) + * at a time. General information about this interface follows. + */ + + struct ieee80211_vif *vif; + /* The MAC address of the operating interface. */ + u8 mac_addr[ETH_ALEN]; + /* Current BSSID */ + u8 bssid[ETH_ALEN]; + /* Interface type. (NL80211_IFTYPE_XXX) */ + int if_type; + /* Is the card operating in AP, STA or IBSS mode? */ + bool operating; + /* filter flags */ + unsigned int filter_flags; + /* Stats about the wireless interface */ + struct ieee80211_low_level_stats ieee_stats; + +#ifdef CONFIG_B43_HWRNG + struct hwrng rng; + bool rng_initialized; + char rng_name[30 + 1]; +#endif /* CONFIG_B43_HWRNG */ + + /* List of all wireless devices on this chip */ + struct list_head devlist; + u8 nr_devs; + + bool radiotap_enabled; + bool radio_enabled; + + /* The beacon we are currently using (AP or IBSS mode). */ + struct sk_buff *current_beacon; + bool beacon0_uploaded; + bool beacon1_uploaded; + bool beacon_templates_virgin; /* Never wrote the templates? */ + struct work_struct beacon_update_trigger; + + /* The current QOS parameters for the 4 queues. */ + struct b43_qos_params qos_params[4]; + + /* Work for adjustment of the transmission power. + * This is scheduled when we determine that the actual TX output + * power doesn't match what we want. */ + struct work_struct txpower_adjust_work; + + /* Packet transmit work */ + struct work_struct tx_work; + /* Queue of packets to be transmitted. */ + struct sk_buff_head tx_queue; + + /* The device LEDs. */ + struct b43_leds leds; + +#ifdef CONFIG_B43_PIO + /* + * RX/TX header/tail buffers used by the frame transmit functions. + */ + struct b43_rxhdr_fw4 rxhdr; + struct b43_txhdr txhdr; + u8 rx_tail[4]; + u8 tx_tail[4]; +#endif /* CONFIG_B43_PIO */ +}; + static inline struct b43_wl *hw_to_b43_wl(struct ieee80211_hw *hw) { return hw->priv; diff --git a/drivers/net/wireless/b43/leds.c b/drivers/net/wireless/b43/leds.c index fbe3d4f62ce2..1e8dba488004 100644 --- a/drivers/net/wireless/b43/leds.c +++ b/drivers/net/wireless/b43/leds.c @@ -348,9 +348,9 @@ void b43_leds_register(struct b43_wldev *dev) } } -void b43_leds_unregister(struct b43_wldev *dev) +void b43_leds_unregister(struct b43_wl *wl) { - struct b43_leds *leds = &dev->wl->leds; + struct b43_leds *leds = &wl->leds; b43_unregister_led(&leds->led_tx); b43_unregister_led(&leds->led_rx); diff --git a/drivers/net/wireless/b43/leds.h b/drivers/net/wireless/b43/leds.h index 9592e4c5a5f5..4c56187810fc 100644 --- a/drivers/net/wireless/b43/leds.h +++ b/drivers/net/wireless/b43/leds.h @@ -60,7 +60,7 @@ enum b43_led_behaviour { }; void b43_leds_register(struct b43_wldev *dev); -void b43_leds_unregister(struct b43_wldev *dev); +void b43_leds_unregister(struct b43_wl *wl); void b43_leds_init(struct b43_wldev *dev); void b43_leds_exit(struct b43_wldev *dev); void b43_leds_stop(struct b43_wldev *dev); @@ -76,7 +76,7 @@ struct b43_leds { static inline void b43_leds_register(struct b43_wldev *dev) { } -static inline void b43_leds_unregister(struct b43_wldev *dev) +static inline void b43_leds_unregister(struct b43_wl *wl) { } static inline void b43_leds_init(struct b43_wldev *dev) diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index 9b907a36bb8c..df6b26a0c05e 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -3874,6 +3874,7 @@ static struct b43_wldev * b43_wireless_core_stop(struct b43_wldev *dev) { struct b43_wl *wl = dev->wl; struct b43_wldev *orig_dev; + u32 mask; redo: if (!dev || b43_status(dev) < B43_STAT_STARTED) @@ -3920,7 +3921,8 @@ redo: goto redo; return dev; } - B43_WARN_ON(b43_read32(dev, B43_MMIO_GEN_IRQ_MASK)); + mask = b43_read32(dev, B43_MMIO_GEN_IRQ_MASK); + B43_WARN_ON(mask != 0xFFFFFFFF && mask); /* Drain the TX queue */ while (skb_queue_len(&wl->tx_queue)) @@ -4499,6 +4501,7 @@ static void b43_op_stop(struct ieee80211_hw *hw) cancel_work_sync(&(wl->beacon_update_trigger)); + wiphy_rfkill_stop_polling(hw->wiphy); mutex_lock(&wl->mutex); if (b43_status(dev) >= B43_STAT_STARTED) { dev = b43_wireless_core_stop(dev); @@ -4997,7 +5000,7 @@ static void b43_remove(struct ssb_device *dev) if (list_empty(&wl->devlist)) { b43_rng_exit(wl); - b43_leds_unregister(wldev); + b43_leds_unregister(wl); /* Last core on the chip unregistered. * We can destroy common struct b43_wl. */ diff --git a/drivers/net/wireless/b43/pio.c b/drivers/net/wireless/b43/pio.c index e96091b31499..9b9044400218 100644 --- a/drivers/net/wireless/b43/pio.c +++ b/drivers/net/wireless/b43/pio.c @@ -30,6 +30,7 @@ #include "xmit.h" #include <linux/delay.h> +#include <linux/sched.h> static u16 generate_cookie(struct b43_pio_txqueue *q, @@ -331,6 +332,7 @@ static u16 tx_write_2byte_queue(struct b43_pio_txqueue *q, unsigned int data_len) { struct b43_wldev *dev = q->dev; + struct b43_wl *wl = dev->wl; const u8 *data = _data; ctl |= B43_PIO_TXCTL_WRITELO | B43_PIO_TXCTL_WRITEHI; @@ -343,7 +345,11 @@ static u16 tx_write_2byte_queue(struct b43_pio_txqueue *q, /* Write the last byte. */ ctl &= ~B43_PIO_TXCTL_WRITEHI; b43_piotx_write16(q, B43_PIO_TXCTL, ctl); - b43_piotx_write16(q, B43_PIO_TXDATA, data[data_len - 1]); + wl->tx_tail[0] = data[data_len - 1]; + wl->tx_tail[1] = 0; + ssb_block_write(dev->dev, wl->tx_tail, 2, + q->mmio_base + B43_PIO_TXDATA, + sizeof(u16)); } return ctl; @@ -376,6 +382,7 @@ static u32 tx_write_4byte_queue(struct b43_pio_txqueue *q, unsigned int data_len) { struct b43_wldev *dev = q->dev; + struct b43_wl *wl = dev->wl; const u8 *data = _data; ctl |= B43_PIO8_TXCTL_0_7 | B43_PIO8_TXCTL_8_15 | @@ -386,26 +393,33 @@ static u32 tx_write_4byte_queue(struct b43_pio_txqueue *q, q->mmio_base + B43_PIO8_TXDATA, sizeof(u32)); if (data_len & 3) { - u32 value = 0; - + wl->tx_tail[3] = 0; /* Write the last few bytes. */ ctl &= ~(B43_PIO8_TXCTL_8_15 | B43_PIO8_TXCTL_16_23 | B43_PIO8_TXCTL_24_31); - data = &(data[data_len - 1]); switch (data_len & 3) { case 3: - ctl |= B43_PIO8_TXCTL_16_23; - value |= (u32)(*data) << 16; - data--; + ctl |= B43_PIO8_TXCTL_16_23 | B43_PIO8_TXCTL_8_15; + wl->tx_tail[0] = data[data_len - 3]; + wl->tx_tail[1] = data[data_len - 2]; + wl->tx_tail[2] = data[data_len - 1]; + break; case 2: ctl |= B43_PIO8_TXCTL_8_15; - value |= (u32)(*data) << 8; - data--; + wl->tx_tail[0] = data[data_len - 2]; + wl->tx_tail[1] = data[data_len - 1]; + wl->tx_tail[2] = 0; + break; case 1: - value |= (u32)(*data); + wl->tx_tail[0] = data[data_len - 1]; + wl->tx_tail[1] = 0; + wl->tx_tail[2] = 0; + break; } b43_piotx_write32(q, B43_PIO8_TXCTL, ctl); - b43_piotx_write32(q, B43_PIO8_TXDATA, value); + ssb_block_write(dev->dev, wl->tx_tail, 4, + q->mmio_base + B43_PIO8_TXDATA, + sizeof(u32)); } return ctl; @@ -435,8 +449,9 @@ static void pio_tx_frame_4byte_queue(struct b43_pio_txpacket *pack, static int pio_tx_frame(struct b43_pio_txqueue *q, struct sk_buff *skb) { + struct b43_wldev *dev = q->dev; + struct b43_wl *wl = dev->wl; struct b43_pio_txpacket *pack; - struct b43_txhdr txhdr; u16 cookie; int err; unsigned int hdrlen; @@ -447,8 +462,8 @@ static int pio_tx_frame(struct b43_pio_txqueue *q, struct b43_pio_txpacket, list); cookie = generate_cookie(q, pack); - hdrlen = b43_txhdr_size(q->dev); - err = b43_generate_txhdr(q->dev, (u8 *)&txhdr, skb, + hdrlen = b43_txhdr_size(dev); + err = b43_generate_txhdr(dev, (u8 *)&wl->txhdr, skb, info, cookie); if (err) return err; @@ -456,15 +471,15 @@ static int pio_tx_frame(struct b43_pio_txqueue *q, if (info->flags & IEEE80211_TX_CTL_SEND_AFTER_DTIM) { /* Tell the firmware about the cookie of the last * mcast frame, so it can clear the more-data bit in it. */ - b43_shm_write16(q->dev, B43_SHM_SHARED, + b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_MCASTCOOKIE, cookie); } pack->skb = skb; if (q->rev >= 8) - pio_tx_frame_4byte_queue(pack, (const u8 *)&txhdr, hdrlen); + pio_tx_frame_4byte_queue(pack, (const u8 *)&wl->txhdr, hdrlen); else - pio_tx_frame_2byte_queue(pack, (const u8 *)&txhdr, hdrlen); + pio_tx_frame_2byte_queue(pack, (const u8 *)&wl->txhdr, hdrlen); /* Remove it from the list of available packet slots. * It will be put back when we receive the status report. */ @@ -604,14 +619,14 @@ void b43_pio_get_tx_stats(struct b43_wldev *dev, static bool pio_rx_frame(struct b43_pio_rxqueue *q) { struct b43_wldev *dev = q->dev; - struct b43_rxhdr_fw4 rxhdr; + struct b43_wl *wl = dev->wl; u16 len; u32 macstat; unsigned int i, padding; struct sk_buff *skb; const char *err_msg = NULL; - memset(&rxhdr, 0, sizeof(rxhdr)); + memset(&wl->rxhdr, 0, sizeof(wl->rxhdr)); /* Check if we have data and wait for it to get ready. */ if (q->rev >= 8) { @@ -649,16 +664,16 @@ data_ready: /* Get the preamble (RX header) */ if (q->rev >= 8) { - ssb_block_read(dev->dev, &rxhdr, sizeof(rxhdr), + ssb_block_read(dev->dev, &wl->rxhdr, sizeof(wl->rxhdr), q->mmio_base + B43_PIO8_RXDATA, sizeof(u32)); } else { - ssb_block_read(dev->dev, &rxhdr, sizeof(rxhdr), + ssb_block_read(dev->dev, &wl->rxhdr, sizeof(wl->rxhdr), q->mmio_base + B43_PIO_RXDATA, sizeof(u16)); } /* Sanity checks. */ - len = le16_to_cpu(rxhdr.frame_len); + len = le16_to_cpu(wl->rxhdr.frame_len); if (unlikely(len > 0x700)) { err_msg = "len > 0x700"; goto rx_error; @@ -668,7 +683,7 @@ data_ready: goto rx_error; } - macstat = le32_to_cpu(rxhdr.mac_status); + macstat = le32_to_cpu(wl->rxhdr.mac_status); if (macstat & B43_RX_MAC_FCSERR) { if (!(q->dev->wl->filter_flags & FIF_FCSFAIL)) { /* Drop frames with failed FCS. */ @@ -693,21 +708,23 @@ data_ready: q->mmio_base + B43_PIO8_RXDATA, sizeof(u32)); if (len & 3) { - u32 value; - char *data; - /* Read the last few bytes. */ - value = b43_piorx_read32(q, B43_PIO8_RXDATA); - data = &(skb->data[len + padding - 1]); + ssb_block_read(dev->dev, wl->rx_tail, 4, + q->mmio_base + B43_PIO8_RXDATA, + sizeof(u32)); switch (len & 3) { case 3: - *data = (value >> 16); - data--; + skb->data[len + padding - 3] = wl->rx_tail[0]; + skb->data[len + padding - 2] = wl->rx_tail[1]; + skb->data[len + padding - 1] = wl->rx_tail[2]; + break; case 2: - *data = (value >> 8); - data--; + skb->data[len + padding - 2] = wl->rx_tail[0]; + skb->data[len + padding - 1] = wl->rx_tail[1]; + break; case 1: - *data = value; + skb->data[len + padding - 1] = wl->rx_tail[0]; + break; } } } else { @@ -715,15 +732,15 @@ data_ready: q->mmio_base + B43_PIO_RXDATA, sizeof(u16)); if (len & 1) { - u16 value; - /* Read the last byte. */ - value = b43_piorx_read16(q, B43_PIO_RXDATA); - skb->data[len + padding - 1] = value; + ssb_block_read(dev->dev, wl->rx_tail, 2, + q->mmio_base + B43_PIO_RXDATA, + sizeof(u16)); + skb->data[len + padding - 1] = wl->rx_tail[0]; } } - b43_rx(q->dev, skb, &rxhdr); + b43_rx(q->dev, skb, &wl->rxhdr); return 1; diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c index ac9f600995e4..f4e9695ec186 100644 --- a/drivers/net/wireless/b43/xmit.c +++ b/drivers/net/wireless/b43/xmit.c @@ -27,7 +27,7 @@ */ -#include "xmit.h" +#include "b43.h" #include "phy_common.h" #include "dma.h" #include "pio.h" @@ -690,7 +690,10 @@ void b43_rx(struct b43_wldev *dev, struct sk_buff *skb, const void *_rxhdr) } memcpy(IEEE80211_SKB_RXCB(skb), &status, sizeof(status)); + + local_bh_disable(); ieee80211_rx(dev->wl->hw, skb); + local_bh_enable(); #if B43_DEBUG dev->rx_count++; diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c index 1d9223b3d4c4..4b60148a5e61 100644 --- a/drivers/net/wireless/b43legacy/main.c +++ b/drivers/net/wireless/b43legacy/main.c @@ -37,6 +37,7 @@ #include <linux/firmware.h> #include <linux/wireless.h> #include <linux/workqueue.h> +#include <linux/sched.h> #include <linux/skbuff.h> #include <linux/dma-mapping.h> #include <net/dst.h> diff --git a/drivers/net/wireless/b43legacy/phy.c b/drivers/net/wireless/b43legacy/phy.c index 11319ec2d64a..aaf227203a98 100644 --- a/drivers/net/wireless/b43legacy/phy.c +++ b/drivers/net/wireless/b43legacy/phy.c @@ -31,6 +31,7 @@ #include <linux/delay.h> #include <linux/pci.h> +#include <linux/sched.h> #include <linux/types.h> #include "b43legacy.h" diff --git a/drivers/net/wireless/hostap/hostap_info.c b/drivers/net/wireless/hostap/hostap_info.c index 6fa14a4e4b53..4dfb40a84c96 100644 --- a/drivers/net/wireless/hostap/hostap_info.c +++ b/drivers/net/wireless/hostap/hostap_info.c @@ -1,6 +1,7 @@ /* Host AP driver Info Frame processing (part of hostap.o module) */ #include <linux/if_arp.h> +#include <linux/sched.h> #include "hostap_wlan.h" #include "hostap.h" #include "hostap_ap.h" diff --git a/drivers/net/wireless/hostap/hostap_ioctl.c b/drivers/net/wireless/hostap/hostap_ioctl.c index 3f2bda881a4f..9419cebca8a5 100644 --- a/drivers/net/wireless/hostap/hostap_ioctl.c +++ b/drivers/net/wireless/hostap/hostap_ioctl.c @@ -1,6 +1,7 @@ /* ioctl() (mostly Linux Wireless Extensions) routines for Host AP driver */ #include <linux/types.h> +#include <linux/sched.h> #include <linux/ethtool.h> #include <linux/if_arp.h> #include <net/lib80211.h> diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c index 8d58e6ed4e7d..827824d45de9 100644 --- a/drivers/net/wireless/ipw2x00/ipw2200.c +++ b/drivers/net/wireless/ipw2x00/ipw2200.c @@ -30,6 +30,7 @@ ******************************************************************************/ +#include <linux/sched.h> #include "ipw2200.h" diff --git a/drivers/net/wireless/iwlwifi/iwl-1000.c b/drivers/net/wireless/iwlwifi/iwl-1000.c index a95caa014143..2716b91ba9fa 100644 --- a/drivers/net/wireless/iwlwifi/iwl-1000.c +++ b/drivers/net/wireless/iwlwifi/iwl-1000.c @@ -99,6 +99,8 @@ static struct iwl_lib_ops iwl1000_lib = { .setup_deferred_work = iwl5000_setup_deferred_work, .is_valid_rtc_data_addr = iwl5000_hw_valid_rtc_data_addr, .load_ucode = iwl5000_load_ucode, + .dump_nic_event_log = iwl_dump_nic_event_log, + .dump_nic_error_log = iwl_dump_nic_error_log, .init_alive_start = iwl5000_init_alive_start, .alive_notify = iwl5000_alive_notify, .send_tx_power = iwl5000_send_tx_power, diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c index a16bd4147eac..cbb0585083a9 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c @@ -702,7 +702,7 @@ static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta, u8 sta_id = iwl_find_station(priv, hdr->addr1); if (sta_id == IWL_INVALID_STATION) { - IWL_DEBUG_RATE(priv, "LQ: ADD station %pm\n", + IWL_DEBUG_RATE(priv, "LQ: ADD station %pM\n", hdr->addr1); sta_id = iwl_add_station(priv, hdr->addr1, false, CMD_ASYNC, NULL); diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c index e9a685d8e3a1..f059b49dc691 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945.c +++ b/drivers/net/wireless/iwlwifi/iwl-3945.c @@ -30,6 +30,7 @@ #include <linux/pci.h> #include <linux/dma-mapping.h> #include <linux/delay.h> +#include <linux/sched.h> #include <linux/skbuff.h> #include <linux/netdevice.h> #include <linux/wireless.h> @@ -610,7 +611,7 @@ static void iwl3945_rx_reply_rx(struct iwl_priv *priv, if (rx_status.band == IEEE80211_BAND_5GHZ) rx_status.rate_idx -= IWL_FIRST_OFDM_RATE; - rx_status.antenna = le16_to_cpu(rx_hdr->phy_flags & + rx_status.antenna = (le16_to_cpu(rx_hdr->phy_flags) & RX_RES_PHY_FLAGS_ANTENNA_MSK) >> 4; /* set the preamble flag if appropriate */ @@ -2839,6 +2840,8 @@ static struct iwl_lib_ops iwl3945_lib = { .txq_free_tfd = iwl3945_hw_txq_free_tfd, .txq_init = iwl3945_hw_tx_queue_init, .load_ucode = iwl3945_load_bsm, + .dump_nic_event_log = iwl3945_dump_nic_event_log, + .dump_nic_error_log = iwl3945_dump_nic_error_log, .apm_ops = { .init = iwl3945_apm_init, .reset = iwl3945_apm_reset, diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.h b/drivers/net/wireless/iwlwifi/iwl-3945.h index f24036909916..21679bf3a1aa 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945.h +++ b/drivers/net/wireless/iwlwifi/iwl-3945.h @@ -209,6 +209,8 @@ extern int __must_check iwl3945_send_cmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd); extern unsigned int iwl3945_fill_beacon_frame(struct iwl_priv *priv, struct ieee80211_hdr *hdr,int left); +extern void iwl3945_dump_nic_event_log(struct iwl_priv *priv); +extern void iwl3945_dump_nic_error_log(struct iwl_priv *priv); /* * Currently used by iwl-3945-rs... look at restructuring so that it doesn't diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c index 3259b8841544..6f703a041847 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965.c @@ -30,6 +30,7 @@ #include <linux/pci.h> #include <linux/dma-mapping.h> #include <linux/delay.h> +#include <linux/sched.h> #include <linux/skbuff.h> #include <linux/netdevice.h> #include <linux/wireless.h> @@ -2298,6 +2299,8 @@ static struct iwl_lib_ops iwl4965_lib = { .alive_notify = iwl4965_alive_notify, .init_alive_start = iwl4965_init_alive_start, .load_ucode = iwl4965_load_bsm, + .dump_nic_event_log = iwl_dump_nic_event_log, + .dump_nic_error_log = iwl_dump_nic_error_log, .apm_ops = { .init = iwl4965_apm_init, .reset = iwl4965_apm_reset, diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index a6391c7fea53..6e6f516ba404 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -29,6 +29,7 @@ #include <linux/pci.h> #include <linux/dma-mapping.h> #include <linux/delay.h> +#include <linux/sched.h> #include <linux/skbuff.h> #include <linux/netdevice.h> #include <linux/wireless.h> @@ -317,7 +318,7 @@ static void iwl5000_gain_computation(struct iwl_priv *priv, (s32)average_noise[i])) / 1500; /* bound gain by 2 bits value max, 3rd bit is sign */ data->delta_gain_code[i] = - min(abs(delta_g), CHAIN_NOISE_MAX_DELTA_GAIN_CODE); + min(abs(delta_g), (long) CHAIN_NOISE_MAX_DELTA_GAIN_CODE); if (delta_g < 0) /* set negative sign */ @@ -1535,6 +1536,8 @@ struct iwl_lib_ops iwl5000_lib = { .rx_handler_setup = iwl5000_rx_handler_setup, .setup_deferred_work = iwl5000_setup_deferred_work, .is_valid_rtc_data_addr = iwl5000_hw_valid_rtc_data_addr, + .dump_nic_event_log = iwl_dump_nic_event_log, + .dump_nic_error_log = iwl_dump_nic_error_log, .load_ucode = iwl5000_load_ucode, .init_alive_start = iwl5000_init_alive_start, .alive_notify = iwl5000_alive_notify, @@ -1585,6 +1588,8 @@ static struct iwl_lib_ops iwl5150_lib = { .rx_handler_setup = iwl5000_rx_handler_setup, .setup_deferred_work = iwl5000_setup_deferred_work, .is_valid_rtc_data_addr = iwl5000_hw_valid_rtc_data_addr, + .dump_nic_event_log = iwl_dump_nic_event_log, + .dump_nic_error_log = iwl_dump_nic_error_log, .load_ucode = iwl5000_load_ucode, .init_alive_start = iwl5000_init_alive_start, .alive_notify = iwl5000_alive_notify, diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c index 82b9c93dff54..c295b8ee9228 100644 --- a/drivers/net/wireless/iwlwifi/iwl-6000.c +++ b/drivers/net/wireless/iwlwifi/iwl-6000.c @@ -100,6 +100,8 @@ static struct iwl_lib_ops iwl6000_lib = { .setup_deferred_work = iwl5000_setup_deferred_work, .is_valid_rtc_data_addr = iwl5000_hw_valid_rtc_data_addr, .load_ucode = iwl5000_load_ucode, + .dump_nic_event_log = iwl_dump_nic_event_log, + .dump_nic_error_log = iwl_dump_nic_error_log, .init_alive_start = iwl5000_init_alive_start, .alive_notify = iwl5000_alive_notify, .send_tx_power = iwl5000_send_tx_power, diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 00457bff1ed1..eaafae091f5b 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -33,6 +33,7 @@ #include <linux/pci.h> #include <linux/dma-mapping.h> #include <linux/delay.h> +#include <linux/sched.h> #include <linux/skbuff.h> #include <linux/netdevice.h> #include <linux/wireless.h> @@ -1526,6 +1527,191 @@ static int iwl_read_ucode(struct iwl_priv *priv) return ret; } +#ifdef CONFIG_IWLWIFI_DEBUG +static const char *desc_lookup_text[] = { + "OK", + "FAIL", + "BAD_PARAM", + "BAD_CHECKSUM", + "NMI_INTERRUPT_WDG", + "SYSASSERT", + "FATAL_ERROR", + "BAD_COMMAND", + "HW_ERROR_TUNE_LOCK", + "HW_ERROR_TEMPERATURE", + "ILLEGAL_CHAN_FREQ", + "VCC_NOT_STABLE", + "FH_ERROR", + "NMI_INTERRUPT_HOST", + "NMI_INTERRUPT_ACTION_PT", + "NMI_INTERRUPT_UNKNOWN", + "UCODE_VERSION_MISMATCH", + "HW_ERROR_ABS_LOCK", + "HW_ERROR_CAL_LOCK_FAIL", + "NMI_INTERRUPT_INST_ACTION_PT", + "NMI_INTERRUPT_DATA_ACTION_PT", + "NMI_TRM_HW_ER", + "NMI_INTERRUPT_TRM", + "NMI_INTERRUPT_BREAK_POINT" + "DEBUG_0", + "DEBUG_1", + "DEBUG_2", + "DEBUG_3", + "UNKNOWN" +}; + +static const char *desc_lookup(int i) +{ + int max = ARRAY_SIZE(desc_lookup_text) - 1; + + if (i < 0 || i > max) + i = max; + + return desc_lookup_text[i]; +} + +#define ERROR_START_OFFSET (1 * sizeof(u32)) +#define ERROR_ELEM_SIZE (7 * sizeof(u32)) + +void iwl_dump_nic_error_log(struct iwl_priv *priv) +{ + u32 data2, line; + u32 desc, time, count, base, data1; + u32 blink1, blink2, ilink1, ilink2; + + if (priv->ucode_type == UCODE_INIT) + base = le32_to_cpu(priv->card_alive_init.error_event_table_ptr); + else + base = le32_to_cpu(priv->card_alive.error_event_table_ptr); + + if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) { + IWL_ERR(priv, "Not valid error log pointer 0x%08X\n", base); + return; + } + + count = iwl_read_targ_mem(priv, base); + + if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) { + IWL_ERR(priv, "Start IWL Error Log Dump:\n"); + IWL_ERR(priv, "Status: 0x%08lX, count: %d\n", + priv->status, count); + } + + desc = iwl_read_targ_mem(priv, base + 1 * sizeof(u32)); + blink1 = iwl_read_targ_mem(priv, base + 3 * sizeof(u32)); + blink2 = iwl_read_targ_mem(priv, base + 4 * sizeof(u32)); + ilink1 = iwl_read_targ_mem(priv, base + 5 * sizeof(u32)); + ilink2 = iwl_read_targ_mem(priv, base + 6 * sizeof(u32)); + data1 = iwl_read_targ_mem(priv, base + 7 * sizeof(u32)); + data2 = iwl_read_targ_mem(priv, base + 8 * sizeof(u32)); + line = iwl_read_targ_mem(priv, base + 9 * sizeof(u32)); + time = iwl_read_targ_mem(priv, base + 11 * sizeof(u32)); + + IWL_ERR(priv, "Desc Time " + "data1 data2 line\n"); + IWL_ERR(priv, "%-28s (#%02d) %010u 0x%08X 0x%08X %u\n", + desc_lookup(desc), desc, time, data1, data2, line); + IWL_ERR(priv, "blink1 blink2 ilink1 ilink2\n"); + IWL_ERR(priv, "0x%05X 0x%05X 0x%05X 0x%05X\n", blink1, blink2, + ilink1, ilink2); + +} + +#define EVENT_START_OFFSET (4 * sizeof(u32)) + +/** + * iwl_print_event_log - Dump error event log to syslog + * + */ +static void iwl_print_event_log(struct iwl_priv *priv, u32 start_idx, + u32 num_events, u32 mode) +{ + u32 i; + u32 base; /* SRAM byte address of event log header */ + u32 event_size; /* 2 u32s, or 3 u32s if timestamp recorded */ + u32 ptr; /* SRAM byte address of log data */ + u32 ev, time, data; /* event log data */ + + if (num_events == 0) + return; + if (priv->ucode_type == UCODE_INIT) + base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr); + else + base = le32_to_cpu(priv->card_alive.log_event_table_ptr); + + if (mode == 0) + event_size = 2 * sizeof(u32); + else + event_size = 3 * sizeof(u32); + + ptr = base + EVENT_START_OFFSET + (start_idx * event_size); + + /* "time" is actually "data" for mode 0 (no timestamp). + * place event id # at far right for easier visual parsing. */ + for (i = 0; i < num_events; i++) { + ev = iwl_read_targ_mem(priv, ptr); + ptr += sizeof(u32); + time = iwl_read_targ_mem(priv, ptr); + ptr += sizeof(u32); + if (mode == 0) { + /* data, ev */ + IWL_ERR(priv, "EVT_LOG:0x%08x:%04u\n", time, ev); + } else { + data = iwl_read_targ_mem(priv, ptr); + ptr += sizeof(u32); + IWL_ERR(priv, "EVT_LOGT:%010u:0x%08x:%04u\n", + time, data, ev); + } + } +} + +void iwl_dump_nic_event_log(struct iwl_priv *priv) +{ + u32 base; /* SRAM byte address of event log header */ + u32 capacity; /* event log capacity in # entries */ + u32 mode; /* 0 - no timestamp, 1 - timestamp recorded */ + u32 num_wraps; /* # times uCode wrapped to top of log */ + u32 next_entry; /* index of next entry to be written by uCode */ + u32 size; /* # entries that we'll print */ + + if (priv->ucode_type == UCODE_INIT) + base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr); + else + base = le32_to_cpu(priv->card_alive.log_event_table_ptr); + + if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) { + IWL_ERR(priv, "Invalid event log pointer 0x%08X\n", base); + return; + } + + /* event log header */ + capacity = iwl_read_targ_mem(priv, base); + mode = iwl_read_targ_mem(priv, base + (1 * sizeof(u32))); + num_wraps = iwl_read_targ_mem(priv, base + (2 * sizeof(u32))); + next_entry = iwl_read_targ_mem(priv, base + (3 * sizeof(u32))); + + size = num_wraps ? capacity : next_entry; + + /* bail out if nothing in log */ + if (size == 0) { + IWL_ERR(priv, "Start IWL Event Log Dump: nothing in log\n"); + return; + } + + IWL_ERR(priv, "Start IWL Event Log Dump: display count %d, wraps %d\n", + size, num_wraps); + + /* if uCode has wrapped back to top of log, start at the oldest entry, + * i.e the next one that uCode would fill. */ + if (num_wraps) + iwl_print_event_log(priv, next_entry, + capacity - next_entry, mode); + /* (then/else) start at top of log */ + iwl_print_event_log(priv, 0, next_entry, mode); + +} +#endif + /** * iwl_alive_start - called after REPLY_ALIVE notification received * from protocol/runtime uCode (initialization uCode's @@ -2920,8 +3106,8 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) out_pci_disable_device: pci_disable_device(pdev); out_ieee80211_free_hw: - ieee80211_free_hw(priv->hw); iwl_free_traffic_mem(priv); + ieee80211_free_hw(priv->hw); out: return err; } diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h index 2c5c88fc38f5..4afaf773aeac 100644 --- a/drivers/net/wireless/iwlwifi/iwl-commands.h +++ b/drivers/net/wireless/iwlwifi/iwl-commands.h @@ -1154,7 +1154,7 @@ struct iwl_wep_cmd { #define RX_RES_PHY_FLAGS_MOD_CCK_MSK cpu_to_le16(1 << 1) #define RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK cpu_to_le16(1 << 2) #define RX_RES_PHY_FLAGS_NARROW_BAND_MSK cpu_to_le16(1 << 3) -#define RX_RES_PHY_FLAGS_ANTENNA_MSK cpu_to_le16(0xf0) +#define RX_RES_PHY_FLAGS_ANTENNA_MSK 0xf0 #define RX_RES_PHY_FLAGS_ANTENNA_POS 4 #define RX_RES_STATUS_SEC_TYPE_MSK (0x7 << 8) diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index fd26c0dc9c54..2dc928755454 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -29,6 +29,7 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/etherdevice.h> +#include <linux/sched.h> #include <net/mac80211.h> #include "iwl-eeprom.h" @@ -1309,189 +1310,6 @@ static void iwl_print_rx_config_cmd(struct iwl_priv *priv) IWL_DEBUG_RADIO(priv, "u8[6] bssid_addr: %pM\n", rxon->bssid_addr); IWL_DEBUG_RADIO(priv, "u16 assoc_id: 0x%x\n", le16_to_cpu(rxon->assoc_id)); } - -static const char *desc_lookup_text[] = { - "OK", - "FAIL", - "BAD_PARAM", - "BAD_CHECKSUM", - "NMI_INTERRUPT_WDG", - "SYSASSERT", - "FATAL_ERROR", - "BAD_COMMAND", - "HW_ERROR_TUNE_LOCK", - "HW_ERROR_TEMPERATURE", - "ILLEGAL_CHAN_FREQ", - "VCC_NOT_STABLE", - "FH_ERROR", - "NMI_INTERRUPT_HOST", - "NMI_INTERRUPT_ACTION_PT", - "NMI_INTERRUPT_UNKNOWN", - "UCODE_VERSION_MISMATCH", - "HW_ERROR_ABS_LOCK", - "HW_ERROR_CAL_LOCK_FAIL", - "NMI_INTERRUPT_INST_ACTION_PT", - "NMI_INTERRUPT_DATA_ACTION_PT", - "NMI_TRM_HW_ER", - "NMI_INTERRUPT_TRM", - "NMI_INTERRUPT_BREAK_POINT" - "DEBUG_0", - "DEBUG_1", - "DEBUG_2", - "DEBUG_3", - "UNKNOWN" -}; - -static const char *desc_lookup(int i) -{ - int max = ARRAY_SIZE(desc_lookup_text) - 1; - - if (i < 0 || i > max) - i = max; - - return desc_lookup_text[i]; -} - -#define ERROR_START_OFFSET (1 * sizeof(u32)) -#define ERROR_ELEM_SIZE (7 * sizeof(u32)) - -static void iwl_dump_nic_error_log(struct iwl_priv *priv) -{ - u32 data2, line; - u32 desc, time, count, base, data1; - u32 blink1, blink2, ilink1, ilink2; - - if (priv->ucode_type == UCODE_INIT) - base = le32_to_cpu(priv->card_alive_init.error_event_table_ptr); - else - base = le32_to_cpu(priv->card_alive.error_event_table_ptr); - - if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) { - IWL_ERR(priv, "Not valid error log pointer 0x%08X\n", base); - return; - } - - count = iwl_read_targ_mem(priv, base); - - if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) { - IWL_ERR(priv, "Start IWL Error Log Dump:\n"); - IWL_ERR(priv, "Status: 0x%08lX, count: %d\n", - priv->status, count); - } - - desc = iwl_read_targ_mem(priv, base + 1 * sizeof(u32)); - blink1 = iwl_read_targ_mem(priv, base + 3 * sizeof(u32)); - blink2 = iwl_read_targ_mem(priv, base + 4 * sizeof(u32)); - ilink1 = iwl_read_targ_mem(priv, base + 5 * sizeof(u32)); - ilink2 = iwl_read_targ_mem(priv, base + 6 * sizeof(u32)); - data1 = iwl_read_targ_mem(priv, base + 7 * sizeof(u32)); - data2 = iwl_read_targ_mem(priv, base + 8 * sizeof(u32)); - line = iwl_read_targ_mem(priv, base + 9 * sizeof(u32)); - time = iwl_read_targ_mem(priv, base + 11 * sizeof(u32)); - - IWL_ERR(priv, "Desc Time " - "data1 data2 line\n"); - IWL_ERR(priv, "%-28s (#%02d) %010u 0x%08X 0x%08X %u\n", - desc_lookup(desc), desc, time, data1, data2, line); - IWL_ERR(priv, "blink1 blink2 ilink1 ilink2\n"); - IWL_ERR(priv, "0x%05X 0x%05X 0x%05X 0x%05X\n", blink1, blink2, - ilink1, ilink2); - -} - -#define EVENT_START_OFFSET (4 * sizeof(u32)) - -/** - * iwl_print_event_log - Dump error event log to syslog - * - */ -static void iwl_print_event_log(struct iwl_priv *priv, u32 start_idx, - u32 num_events, u32 mode) -{ - u32 i; - u32 base; /* SRAM byte address of event log header */ - u32 event_size; /* 2 u32s, or 3 u32s if timestamp recorded */ - u32 ptr; /* SRAM byte address of log data */ - u32 ev, time, data; /* event log data */ - - if (num_events == 0) - return; - if (priv->ucode_type == UCODE_INIT) - base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr); - else - base = le32_to_cpu(priv->card_alive.log_event_table_ptr); - - if (mode == 0) - event_size = 2 * sizeof(u32); - else - event_size = 3 * sizeof(u32); - - ptr = base + EVENT_START_OFFSET + (start_idx * event_size); - - /* "time" is actually "data" for mode 0 (no timestamp). - * place event id # at far right for easier visual parsing. */ - for (i = 0; i < num_events; i++) { - ev = iwl_read_targ_mem(priv, ptr); - ptr += sizeof(u32); - time = iwl_read_targ_mem(priv, ptr); - ptr += sizeof(u32); - if (mode == 0) { - /* data, ev */ - IWL_ERR(priv, "EVT_LOG:0x%08x:%04u\n", time, ev); - } else { - data = iwl_read_targ_mem(priv, ptr); - ptr += sizeof(u32); - IWL_ERR(priv, "EVT_LOGT:%010u:0x%08x:%04u\n", - time, data, ev); - } - } -} - -void iwl_dump_nic_event_log(struct iwl_priv *priv) -{ - u32 base; /* SRAM byte address of event log header */ - u32 capacity; /* event log capacity in # entries */ - u32 mode; /* 0 - no timestamp, 1 - timestamp recorded */ - u32 num_wraps; /* # times uCode wrapped to top of log */ - u32 next_entry; /* index of next entry to be written by uCode */ - u32 size; /* # entries that we'll print */ - - if (priv->ucode_type == UCODE_INIT) - base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr); - else - base = le32_to_cpu(priv->card_alive.log_event_table_ptr); - - if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) { - IWL_ERR(priv, "Invalid event log pointer 0x%08X\n", base); - return; - } - - /* event log header */ - capacity = iwl_read_targ_mem(priv, base); - mode = iwl_read_targ_mem(priv, base + (1 * sizeof(u32))); - num_wraps = iwl_read_targ_mem(priv, base + (2 * sizeof(u32))); - next_entry = iwl_read_targ_mem(priv, base + (3 * sizeof(u32))); - - size = num_wraps ? capacity : next_entry; - - /* bail out if nothing in log */ - if (size == 0) { - IWL_ERR(priv, "Start IWL Event Log Dump: nothing in log\n"); - return; - } - - IWL_ERR(priv, "Start IWL Event Log Dump: display count %d, wraps %d\n", - size, num_wraps); - - /* if uCode has wrapped back to top of log, start at the oldest entry, - * i.e the next one that uCode would fill. */ - if (num_wraps) - iwl_print_event_log(priv, next_entry, - capacity - next_entry, mode); - /* (then/else) start at top of log */ - iwl_print_event_log(priv, 0, next_entry, mode); - -} #endif /** * iwl_irq_handle_error - called for HW or SW error interrupt from card @@ -1506,8 +1324,8 @@ void iwl_irq_handle_error(struct iwl_priv *priv) #ifdef CONFIG_IWLWIFI_DEBUG if (iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS) { - iwl_dump_nic_error_log(priv); - iwl_dump_nic_event_log(priv); + priv->cfg->ops->lib->dump_nic_error_log(priv); + priv->cfg->ops->lib->dump_nic_event_log(priv); iwl_print_rx_config_cmd(priv); } #endif diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h index 7ff9ffb2b702..e50103a956b1 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.h +++ b/drivers/net/wireless/iwlwifi/iwl-core.h @@ -166,6 +166,8 @@ struct iwl_lib_ops { int (*is_valid_rtc_data_addr)(u32 addr); /* 1st ucode load */ int (*load_ucode)(struct iwl_priv *priv); + void (*dump_nic_event_log)(struct iwl_priv *priv); + void (*dump_nic_error_log)(struct iwl_priv *priv); /* power management */ struct iwl_apm_ops apm_ops; @@ -540,7 +542,19 @@ int iwl_pci_resume(struct pci_dev *pdev); /***************************************************** * Error Handling Debugging ******************************************************/ +#ifdef CONFIG_IWLWIFI_DEBUG void iwl_dump_nic_event_log(struct iwl_priv *priv); +void iwl_dump_nic_error_log(struct iwl_priv *priv); +#else +static inline void iwl_dump_nic_event_log(struct iwl_priv *priv) +{ +} + +static inline void iwl_dump_nic_error_log(struct iwl_priv *priv) +{ +} +#endif + void iwl_clear_isr_stats(struct iwl_priv *priv); /***************************************************** diff --git a/drivers/net/wireless/iwlwifi/iwl-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-debugfs.c index fb844859a443..a198bcf61022 100644 --- a/drivers/net/wireless/iwlwifi/iwl-debugfs.c +++ b/drivers/net/wireless/iwlwifi/iwl-debugfs.c @@ -410,7 +410,7 @@ static ssize_t iwl_dbgfs_nvm_read(struct file *file, pos += scnprintf(buf + pos, buf_size - pos, "0x%.4x ", ofs); hex_dump_to_buffer(ptr + ofs, 16 , 16, 2, buf + pos, buf_size - pos, 0); - pos += strlen(buf); + pos += strlen(buf + pos); if (buf_size - pos > 0) buf[pos++] = '\n'; } @@ -436,7 +436,7 @@ static ssize_t iwl_dbgfs_log_event_write(struct file *file, if (sscanf(buf, "%d", &event_log_flag) != 1) return -EFAULT; if (event_log_flag == 1) - iwl_dump_nic_event_log(priv); + priv->cfg->ops->lib->dump_nic_event_log(priv); return count; } @@ -909,7 +909,7 @@ static ssize_t iwl_dbgfs_traffic_log_read(struct file *file, "0x%.4x ", ofs); hex_dump_to_buffer(ptr + ofs, 16, 16, 2, buf + pos, bufsz - pos, 0); - pos += strlen(buf); + pos += strlen(buf + pos); if (bufsz - pos > 0) buf[pos++] = '\n'; } @@ -932,7 +932,7 @@ static ssize_t iwl_dbgfs_traffic_log_read(struct file *file, "0x%.4x ", ofs); hex_dump_to_buffer(ptr + ofs, 16, 16, 2, buf + pos, bufsz - pos, 0); - pos += strlen(buf); + pos += strlen(buf + pos); if (bufsz - pos > 0) buf[pos++] = '\n'; } diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.c b/drivers/net/wireless/iwlwifi/iwl-eeprom.c index 3d2b93a61e62..e14c9952a935 100644 --- a/drivers/net/wireless/iwlwifi/iwl-eeprom.c +++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.c @@ -410,7 +410,6 @@ static int iwl_find_otp_image(struct iwl_priv *priv, u16 *validblockaddr) { u16 next_link_addr = 0, link_value = 0, valid_addr; - int ret = 0; int usedblocks = 0; /* set addressing mode to absolute to traverse the link list */ @@ -430,29 +429,29 @@ static int iwl_find_otp_image(struct iwl_priv *priv, * check for more block on the link list */ valid_addr = next_link_addr; - next_link_addr = link_value; + next_link_addr = link_value * sizeof(u16); IWL_DEBUG_INFO(priv, "OTP blocks %d addr 0x%x\n", usedblocks, next_link_addr); if (iwl_read_otp_word(priv, next_link_addr, &link_value)) return -EINVAL; if (!link_value) { /* - * reach the end of link list, + * reach the end of link list, return success and * set address point to the starting address * of the image */ - goto done; + *validblockaddr = valid_addr; + /* skip first 2 bytes (link list pointer) */ + *validblockaddr += 2; + return 0; } /* more in the link list, continue */ usedblocks++; - } while (usedblocks < priv->cfg->max_ll_items); - /* OTP full, use last block */ - IWL_DEBUG_INFO(priv, "OTP is full, use last block\n"); -done: - *validblockaddr = valid_addr; - /* skip first 2 bytes (link list pointer) */ - *validblockaddr += 2; - return ret; + } while (usedblocks <= priv->cfg->max_ll_items); + + /* OTP has no valid blocks */ + IWL_DEBUG_INFO(priv, "OTP has no valid blocks\n"); + return -EINVAL; } /** diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.h b/drivers/net/wireless/iwlwifi/iwl-eeprom.h index 6b68db7b1b81..80b9e45d9b9c 100644 --- a/drivers/net/wireless/iwlwifi/iwl-eeprom.h +++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.h @@ -220,35 +220,35 @@ struct iwl_eeprom_enhanced_txpwr { * Section 10: 2.4 GHz 40MHz channels: 132, 44 (_above_) */ /* 2.4 GHz band: CCK */ -#define EEPROM_LB_CCK_20_COMMON ((0xAA)\ +#define EEPROM_LB_CCK_20_COMMON ((0xA8)\ | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 8 bytes */ /* 2.4 GHz band: 20MHz-Legacy, 20MHz-HT, 40MHz-HT */ -#define EEPROM_LB_OFDM_COMMON ((0xB2)\ +#define EEPROM_LB_OFDM_COMMON ((0xB0)\ | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 24 bytes */ /* 5.2 GHz band: 20MHz-Legacy, 20MHz-HT, 40MHz-HT */ -#define EEPROM_HB_OFDM_COMMON ((0xCA)\ +#define EEPROM_HB_OFDM_COMMON ((0xC8)\ | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 24 bytes */ /* 2.4GHz band channels: * 1Legacy, 1HT, 2Legacy, 2HT, 10Legacy, 10HT, 11Legacy, 11HT */ -#define EEPROM_LB_OFDM_20_BAND ((0xE2)\ +#define EEPROM_LB_OFDM_20_BAND ((0xE0)\ | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 64 bytes */ /* 2.4 GHz band HT40 channels: (1,+1) (2,+1) (6,+1) (7,+1) (9,+1) */ -#define EEPROM_LB_OFDM_HT40_BAND ((0x122)\ +#define EEPROM_LB_OFDM_HT40_BAND ((0x120)\ | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 40 bytes */ /* 5.2GHz band channels: 36Legacy, 36HT, 64Legacy, 64HT, 100Legacy, 100HT */ -#define EEPROM_HB_OFDM_20_BAND ((0x14A)\ +#define EEPROM_HB_OFDM_20_BAND ((0x148)\ | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 48 bytes */ /* 5.2 GHz band HT40 channels: (36,+1) (60,+1) (100,+1) */ -#define EEPROM_HB_OFDM_HT40_BAND ((0x17A)\ +#define EEPROM_HB_OFDM_HT40_BAND ((0x178)\ | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 24 bytes */ /* 2.4 GHz band, channnel 13: Legacy, HT */ -#define EEPROM_LB_OFDM_20_CHANNEL_13 ((0x192)\ +#define EEPROM_LB_OFDM_20_CHANNEL_13 ((0x190)\ | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 16 bytes */ /* 5.2 GHz band, channnel 140: Legacy, HT */ -#define EEPROM_HB_OFDM_20_CHANNEL_140 ((0x1A2)\ +#define EEPROM_HB_OFDM_20_CHANNEL_140 ((0x1A0)\ | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 16 bytes */ /* 5.2 GHz band, HT40 channnels (132,+1) (44,+1) */ -#define EEPROM_HB_OFDM_HT40_BAND_1 ((0x1B2)\ +#define EEPROM_HB_OFDM_HT40_BAND_1 ((0x1B0)\ | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 16 bytes */ diff --git a/drivers/net/wireless/iwlwifi/iwl-hcmd.c b/drivers/net/wireless/iwlwifi/iwl-hcmd.c index 532c8d6cd8da..a6856daf14cb 100644 --- a/drivers/net/wireless/iwlwifi/iwl-hcmd.c +++ b/drivers/net/wireless/iwlwifi/iwl-hcmd.c @@ -28,6 +28,7 @@ #include <linux/kernel.h> #include <linux/module.h> +#include <linux/sched.h> #include <net/mac80211.h> #include "iwl-dev.h" /* FIXME: remove */ diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c index 8e1bb53c0aa3..493626bcd3ec 100644 --- a/drivers/net/wireless/iwlwifi/iwl-rx.c +++ b/drivers/net/wireless/iwlwifi/iwl-rx.c @@ -1044,7 +1044,7 @@ void iwl_rx_reply_rx(struct iwl_priv *priv, * as a bitmask. */ rx_status.antenna = - le16_to_cpu(phy_res->phy_flags & RX_RES_PHY_FLAGS_ANTENNA_MSK) + (le16_to_cpu(phy_res->phy_flags) & RX_RES_PHY_FLAGS_ANTENNA_MSK) >> RX_RES_PHY_FLAGS_ANTENNA_POS; /* set the preamble flag if appropriate */ diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c index a7422e52d883..fb9bcfa6d947 100644 --- a/drivers/net/wireless/iwlwifi/iwl-tx.c +++ b/drivers/net/wireless/iwlwifi/iwl-tx.c @@ -28,6 +28,7 @@ *****************************************************************************/ #include <linux/etherdevice.h> +#include <linux/sched.h> #include <net/mac80211.h> #include "iwl-eeprom.h" #include "iwl-dev.h" @@ -197,6 +198,12 @@ void iwl_cmd_queue_free(struct iwl_priv *priv) pci_free_consistent(dev, priv->hw_params.tfd_size * txq->q.n_bd, txq->tfds, txq->q.dma_addr); + /* deallocate arrays */ + kfree(txq->cmd); + kfree(txq->meta); + txq->cmd = NULL; + txq->meta = NULL; + /* 0-fill queue descriptor structure */ memset(txq, 0, sizeof(*txq)); } diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 4f2d43937283..d00a80334095 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -33,6 +33,7 @@ #include <linux/pci.h> #include <linux/dma-mapping.h> #include <linux/delay.h> +#include <linux/sched.h> #include <linux/skbuff.h> #include <linux/netdevice.h> #include <linux/wireless.h> @@ -1481,6 +1482,7 @@ static inline void iwl_synchronize_irq(struct iwl_priv *priv) tasklet_kill(&priv->irq_tasklet); } +#ifdef CONFIG_IWLWIFI_DEBUG static const char *desc_lookup(int i) { switch (i) { @@ -1504,7 +1506,7 @@ static const char *desc_lookup(int i) #define ERROR_START_OFFSET (1 * sizeof(u32)) #define ERROR_ELEM_SIZE (7 * sizeof(u32)) -static void iwl3945_dump_nic_error_log(struct iwl_priv *priv) +void iwl3945_dump_nic_error_log(struct iwl_priv *priv) { u32 i; u32 desc, time, count, base, data1; @@ -1598,7 +1600,7 @@ static void iwl3945_print_event_log(struct iwl_priv *priv, u32 start_idx, } } -static void iwl3945_dump_nic_event_log(struct iwl_priv *priv) +void iwl3945_dump_nic_event_log(struct iwl_priv *priv) { u32 base; /* SRAM byte address of event log header */ u32 capacity; /* event log capacity in # entries */ @@ -1640,6 +1642,16 @@ static void iwl3945_dump_nic_event_log(struct iwl_priv *priv) iwl3945_print_event_log(priv, 0, next_entry, mode); } +#else +void iwl3945_dump_nic_event_log(struct iwl_priv *priv) +{ +} + +void iwl3945_dump_nic_error_log(struct iwl_priv *priv) +{ +} + +#endif static void iwl3945_irq_tasklet(struct iwl_priv *priv) { @@ -3683,21 +3695,6 @@ static ssize_t dump_error_log(struct device *d, static DEVICE_ATTR(dump_errors, S_IWUSR, NULL, dump_error_log); -static ssize_t dump_event_log(struct device *d, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct iwl_priv *priv = dev_get_drvdata(d); - char *p = (char *)buf; - - if (p[0] == '1') - iwl3945_dump_nic_event_log(priv); - - return strnlen(buf, count); -} - -static DEVICE_ATTR(dump_events, S_IWUSR, NULL, dump_event_log); - /***************************************************************************** * * driver setup and tear down @@ -3742,7 +3739,6 @@ static struct attribute *iwl3945_sysfs_entries[] = { &dev_attr_antenna.attr, &dev_attr_channels.attr, &dev_attr_dump_errors.attr, - &dev_attr_dump_events.attr, &dev_attr_flags.attr, &dev_attr_filter_flags.attr, #ifdef CONFIG_IWL3945_SPECTRUM_MEASUREMENT @@ -4101,8 +4097,8 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e pci_set_drvdata(pdev, NULL); pci_disable_device(pdev); out_ieee80211_free_hw: - ieee80211_free_hw(priv->hw); iwl_free_traffic_mem(priv); + ieee80211_free_hw(priv->hw); out: return err; } diff --git a/drivers/net/wireless/iwmc3200wifi/cfg80211.c b/drivers/net/wireless/iwmc3200wifi/cfg80211.c index a56a2b0ac99a..f3c55658225b 100644 --- a/drivers/net/wireless/iwmc3200wifi/cfg80211.c +++ b/drivers/net/wireless/iwmc3200wifi/cfg80211.c @@ -23,6 +23,7 @@ #include <linux/kernel.h> #include <linux/netdevice.h> +#include <linux/sched.h> #include <linux/etherdevice.h> #include <linux/wireless.h> #include <linux/ieee80211.h> diff --git a/drivers/net/wireless/iwmc3200wifi/commands.c b/drivers/net/wireless/iwmc3200wifi/commands.c index 23b52fa2605f..84158b6d35d8 100644 --- a/drivers/net/wireless/iwmc3200wifi/commands.c +++ b/drivers/net/wireless/iwmc3200wifi/commands.c @@ -40,6 +40,7 @@ #include <linux/wireless.h> #include <linux/etherdevice.h> #include <linux/ieee80211.h> +#include <linux/sched.h> #include "iwm.h" #include "bus.h" diff --git a/drivers/net/wireless/iwmc3200wifi/main.c b/drivers/net/wireless/iwmc3200wifi/main.c index d668e4756324..222eb2cf1b30 100644 --- a/drivers/net/wireless/iwmc3200wifi/main.c +++ b/drivers/net/wireless/iwmc3200wifi/main.c @@ -38,6 +38,7 @@ #include <linux/kernel.h> #include <linux/netdevice.h> +#include <linux/sched.h> #include <linux/ieee80211.h> #include <linux/wireless.h> diff --git a/drivers/net/wireless/iwmc3200wifi/rx.c b/drivers/net/wireless/iwmc3200wifi/rx.c index 40dbcbc16593..771a301003c9 100644 --- a/drivers/net/wireless/iwmc3200wifi/rx.c +++ b/drivers/net/wireless/iwmc3200wifi/rx.c @@ -38,6 +38,7 @@ #include <linux/kernel.h> #include <linux/netdevice.h> +#include <linux/sched.h> #include <linux/etherdevice.h> #include <linux/wireless.h> #include <linux/ieee80211.h> diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c index 685098148e10..0a324dcd264c 100644 --- a/drivers/net/wireless/libertas/cmd.c +++ b/drivers/net/wireless/libertas/cmd.c @@ -6,6 +6,7 @@ #include <net/iw_handler.h> #include <net/lib80211.h> #include <linux/kfifo.h> +#include <linux/sched.h> #include "host.h" #include "hostcmd.h" #include "decl.h" diff --git a/drivers/net/wireless/libertas/cmdresp.c b/drivers/net/wireless/libertas/cmdresp.c index c42d3faa2660..23f684337fdd 100644 --- a/drivers/net/wireless/libertas/cmdresp.c +++ b/drivers/net/wireless/libertas/cmdresp.c @@ -3,6 +3,7 @@ * responses as well as events generated by firmware. */ #include <linux/delay.h> +#include <linux/sched.h> #include <linux/if_arp.h> #include <linux/netdevice.h> #include <asm/unaligned.h> diff --git a/drivers/net/wireless/libertas/tx.c b/drivers/net/wireless/libertas/tx.c index 4c018f7a0a8d..8c3766a6e8e7 100644 --- a/drivers/net/wireless/libertas/tx.c +++ b/drivers/net/wireless/libertas/tx.c @@ -3,6 +3,7 @@ */ #include <linux/netdevice.h> #include <linux/etherdevice.h> +#include <linux/sched.h> #include "hostcmd.h" #include "radiotap.h" diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index 896f532182f0..38cfd79e0590 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -631,6 +631,9 @@ static void mac80211_hwsim_bss_info_changed(struct ieee80211_hw *hw, data->beacon_int = 1024 * info->beacon_int / 1000 * HZ / 1000; if (WARN_ON(!data->beacon_int)) data->beacon_int = 1; + if (data->started) + mod_timer(&data->beacon_timer, + jiffies + data->beacon_int); } if (changed & BSS_CHANGED_ERP_CTS_PROT) { diff --git a/drivers/net/wireless/prism54/isl_ioctl.c b/drivers/net/wireless/prism54/isl_ioctl.c index 4c97c6ad6f5d..bc08464d8323 100644 --- a/drivers/net/wireless/prism54/isl_ioctl.c +++ b/drivers/net/wireless/prism54/isl_ioctl.c @@ -19,6 +19,7 @@ * */ +#include <linux/capability.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/if_arp.h> diff --git a/drivers/net/wireless/prism54/islpci_dev.c b/drivers/net/wireless/prism54/islpci_dev.c index e26d7b3ceab5..2505be56ae39 100644 --- a/drivers/net/wireless/prism54/islpci_dev.c +++ b/drivers/net/wireless/prism54/islpci_dev.c @@ -23,6 +23,7 @@ #include <linux/netdevice.h> #include <linux/ethtool.h> #include <linux/pci.h> +#include <linux/sched.h> #include <linux/etherdevice.h> #include <linux/delay.h> #include <linux/if_arp.h> diff --git a/drivers/net/wireless/prism54/islpci_mgt.c b/drivers/net/wireless/prism54/islpci_mgt.c index f7c677e2094d..69d2f882fd06 100644 --- a/drivers/net/wireless/prism54/islpci_mgt.c +++ b/drivers/net/wireless/prism54/islpci_mgt.c @@ -20,6 +20,7 @@ #include <linux/netdevice.h> #include <linux/module.h> #include <linux/pci.h> +#include <linux/sched.h> #include <asm/io.h> #include <asm/system.h> diff --git a/drivers/net/wireless/rt2x00/rt2x00debug.c b/drivers/net/wireless/rt2x00/rt2x00debug.c index 7b3ee8c2eaef..68bc9bb1dbf9 100644 --- a/drivers/net/wireless/rt2x00/rt2x00debug.c +++ b/drivers/net/wireless/rt2x00/rt2x00debug.c @@ -27,6 +27,7 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/poll.h> +#include <linux/sched.h> #include <linux/uaccess.h> #include "rt2x00.h" diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index 1cbd9b4a3efc..b8f5ee33445e 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -2381,6 +2381,7 @@ static struct usb_device_id rt73usb_device_table[] = { /* Huawei-3Com */ { USB_DEVICE(0x1472, 0x0009), USB_DEVICE_DATA(&rt73usb_ops) }, /* Hercules */ + { USB_DEVICE(0x06f8, 0xe002), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x06f8, 0xe010), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x06f8, 0xe020), USB_DEVICE_DATA(&rt73usb_ops) }, /* Linksys */ diff --git a/drivers/net/znet.c b/drivers/net/znet.c index a0384b6f09b6..b42347333750 100644 --- a/drivers/net/znet.c +++ b/drivers/net/znet.c @@ -169,7 +169,6 @@ static void znet_tx_timeout (struct net_device *dev); static int znet_request_resources (struct net_device *dev) { struct znet_private *znet = netdev_priv(dev); - unsigned long flags; if (request_irq (dev->irq, &znet_interrupt, 0, "ZNet", dev)) goto failed; @@ -187,13 +186,9 @@ static int znet_request_resources (struct net_device *dev) free_sia: release_region (znet->sia_base, znet->sia_size); free_tx_dma: - flags = claim_dma_lock(); free_dma (znet->tx_dma); - release_dma_lock (flags); free_rx_dma: - flags = claim_dma_lock(); free_dma (znet->rx_dma); - release_dma_lock (flags); free_irq: free_irq (dev->irq, dev); failed: @@ -203,14 +198,11 @@ static int znet_request_resources (struct net_device *dev) static void znet_release_resources (struct net_device *dev) { struct znet_private *znet = netdev_priv(dev); - unsigned long flags; release_region (znet->sia_base, znet->sia_size); release_region (dev->base_addr, znet->io_size); - flags = claim_dma_lock(); free_dma (znet->tx_dma); free_dma (znet->rx_dma); - release_dma_lock (flags); free_irq (dev->irq, dev); } |