diff options
Diffstat (limited to 'drivers/net')
-rw-r--r-- | drivers/net/wireless/iwlwifi/Makefile | 2 | ||||
-rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-agn-lib.c | 226 | ||||
-rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-agn.c | 354 | ||||
-rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-agn.h | 6 | ||||
-rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-core.h | 3 | ||||
-rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-rx.c | 136 | ||||
-rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-trans-int-pcie.h | 42 | ||||
-rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-trans-rx-pcie.c | 694 | ||||
-rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-trans.c | 61 |
9 files changed, 799 insertions, 725 deletions
diff --git a/drivers/net/wireless/iwlwifi/Makefile b/drivers/net/wireless/iwlwifi/Makefile index 2433389f8dfe..d3c8e37ec153 100644 --- a/drivers/net/wireless/iwlwifi/Makefile +++ b/drivers/net/wireless/iwlwifi/Makefile @@ -14,7 +14,7 @@ iwlagn-objs += iwl-6000.o iwlagn-objs += iwl-1000.o iwlagn-objs += iwl-2000.o iwlagn-objs += iwl-pci.o -iwlagn-objs += iwl-trans.o +iwlagn-objs += iwl-trans.o iwl-trans-rx-pcie.o iwlagn-$(CONFIG_IWLWIFI_DEBUGFS) += iwl-debugfs.o iwlagn-$(CONFIG_IWLWIFI_DEVICE_TRACING) += iwl-devtrace.o diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-lib.c b/drivers/net/wireless/iwlwifi/iwl-agn-lib.c index d2ba20087986..4156316e108d 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-lib.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-lib.c @@ -628,56 +628,6 @@ struct iwl_mod_params iwlagn_mod_params = { /* the rest are 0 by default */ }; -int iwlagn_rx_init(struct iwl_priv *priv, struct iwl_rx_queue *rxq) -{ - u32 rb_size; - const u32 rfdnlog = RX_QUEUE_SIZE_LOG; /* 256 RBDs */ - u32 rb_timeout = 0; /* FIXME: RX_RB_TIMEOUT for all devices? */ - - rb_timeout = RX_RB_TIMEOUT; - - if (iwlagn_mod_params.amsdu_size_8K) - rb_size = FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_8K; - else - rb_size = FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_4K; - - /* Stop Rx DMA */ - iwl_write_direct32(priv, FH_MEM_RCSR_CHNL0_CONFIG_REG, 0); - - /* Reset driver's Rx queue write index */ - iwl_write_direct32(priv, FH_RSCSR_CHNL0_RBDCB_WPTR_REG, 0); - - /* Tell device where to find RBD circular buffer in DRAM */ - iwl_write_direct32(priv, FH_RSCSR_CHNL0_RBDCB_BASE_REG, - (u32)(rxq->bd_dma >> 8)); - - /* Tell device where in DRAM to update its Rx status */ - iwl_write_direct32(priv, FH_RSCSR_CHNL0_STTS_WPTR_REG, - rxq->rb_stts_dma >> 4); - - /* Enable Rx DMA - * FH_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY is set because of HW bug in - * the credit mechanism in 5000 HW RX FIFO - * Direct rx interrupts to hosts - * Rx buffer size 4 or 8k - * RB timeout 0x10 - * 256 RBDs - */ - iwl_write_direct32(priv, FH_MEM_RCSR_CHNL0_CONFIG_REG, - FH_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL | - FH_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY | - FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL | - FH_RCSR_CHNL0_RX_CONFIG_SINGLE_FRAME_MSK | - rb_size| - (rb_timeout << FH_RCSR_RX_CONFIG_REG_IRQ_RBTH_POS)| - (rfdnlog << FH_RCSR_RX_CONFIG_RBDCB_SIZE_POS)); - - /* Set interrupt coalescing timer to default (2048 usecs) */ - iwl_write8(priv, CSR_INT_COALESCING, IWL_HOST_INT_TIMEOUT_DEF); - - return 0; -} - static void iwlagn_set_pwr_vmain(struct iwl_priv *priv) { /* @@ -695,10 +645,10 @@ static void iwlagn_set_pwr_vmain(struct iwl_priv *priv) ~APMG_PS_CTRL_MSK_PWR_SRC); } +/*TODO: this function should move to transport layer */ int iwlagn_hw_nic_init(struct iwl_priv *priv) { unsigned long flags; - struct iwl_rx_queue *rxq = &priv->rxq; /* nic_init */ spin_lock_irqsave(&priv->lock, flags); @@ -716,17 +666,6 @@ int iwlagn_hw_nic_init(struct iwl_priv *priv) /* Allocate the RX queue, or reset if it is already allocated */ trans_rx_init(priv); - iwlagn_rx_replenish(priv); - - iwlagn_rx_init(priv, rxq); - - spin_lock_irqsave(&priv->lock, flags); - - rxq->need_update = 1; - iwl_rx_queue_update_write_ptr(priv, rxq); - - spin_unlock_irqrestore(&priv->lock, flags); - /* Allocate or reset and init all Tx and Command queues */ if (trans_tx_init(priv)) return -ENOMEM; @@ -742,169 +681,6 @@ int iwlagn_hw_nic_init(struct iwl_priv *priv) return 0; } -/** - * iwlagn_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr - */ -static inline __le32 iwlagn_dma_addr2rbd_ptr(struct iwl_priv *priv, - dma_addr_t dma_addr) -{ - return cpu_to_le32((u32)(dma_addr >> 8)); -} - -/** - * iwlagn_rx_queue_restock - refill RX queue from pre-allocated pool - * - * If there are slots in the RX queue that need to be restocked, - * and we have free pre-allocated buffers, fill the ranks as much - * as we can, pulling from rx_free. - * - * This moves the 'write' index forward to catch up with 'processed', and - * also updates the memory address in the firmware to reference the new - * target buffer. - */ -void iwlagn_rx_queue_restock(struct iwl_priv *priv) -{ - struct iwl_rx_queue *rxq = &priv->rxq; - struct list_head *element; - struct iwl_rx_mem_buffer *rxb; - unsigned long flags; - - spin_lock_irqsave(&rxq->lock, flags); - while ((iwl_rx_queue_space(rxq) > 0) && (rxq->free_count)) { - /* The overwritten rxb must be a used one */ - rxb = rxq->queue[rxq->write]; - BUG_ON(rxb && rxb->page); - - /* Get next free Rx buffer, remove from free list */ - element = rxq->rx_free.next; - rxb = list_entry(element, struct iwl_rx_mem_buffer, list); - list_del(element); - - /* Point to Rx buffer via next RBD in circular buffer */ - rxq->bd[rxq->write] = iwlagn_dma_addr2rbd_ptr(priv, - rxb->page_dma); - rxq->queue[rxq->write] = rxb; - rxq->write = (rxq->write + 1) & RX_QUEUE_MASK; - rxq->free_count--; - } - spin_unlock_irqrestore(&rxq->lock, flags); - /* If the pre-allocated buffer pool is dropping low, schedule to - * refill it */ - if (rxq->free_count <= RX_LOW_WATERMARK) - queue_work(priv->workqueue, &priv->rx_replenish); - - - /* If we've added more space for the firmware to place data, tell it. - * Increment device's write pointer in multiples of 8. */ - if (rxq->write_actual != (rxq->write & ~0x7)) { - spin_lock_irqsave(&rxq->lock, flags); - rxq->need_update = 1; - spin_unlock_irqrestore(&rxq->lock, flags); - iwl_rx_queue_update_write_ptr(priv, rxq); - } -} - -/** - * iwlagn_rx_replenish - Move all used packet from rx_used to rx_free - * - * When moving to rx_free an SKB is allocated for the slot. - * - * Also restock the Rx queue via iwl_rx_queue_restock. - * This is called as a scheduled work item (except for during initialization) - */ -void iwlagn_rx_allocate(struct iwl_priv *priv, gfp_t priority) -{ - struct iwl_rx_queue *rxq = &priv->rxq; - struct list_head *element; - struct iwl_rx_mem_buffer *rxb; - struct page *page; - unsigned long flags; - gfp_t gfp_mask = priority; - - while (1) { - spin_lock_irqsave(&rxq->lock, flags); - if (list_empty(&rxq->rx_used)) { - spin_unlock_irqrestore(&rxq->lock, flags); - return; - } - spin_unlock_irqrestore(&rxq->lock, flags); - - if (rxq->free_count > RX_LOW_WATERMARK) - gfp_mask |= __GFP_NOWARN; - - if (priv->hw_params.rx_page_order > 0) - gfp_mask |= __GFP_COMP; - - /* Alloc a new receive buffer */ - page = alloc_pages(gfp_mask, priv->hw_params.rx_page_order); - if (!page) { - if (net_ratelimit()) - IWL_DEBUG_INFO(priv, "alloc_pages failed, " - "order: %d\n", - priv->hw_params.rx_page_order); - - if ((rxq->free_count <= RX_LOW_WATERMARK) && - net_ratelimit()) - IWL_CRIT(priv, "Failed to alloc_pages with %s. Only %u free buffers remaining.\n", - priority == GFP_ATOMIC ? "GFP_ATOMIC" : "GFP_KERNEL", - rxq->free_count); - /* We don't reschedule replenish work here -- we will - * call the restock method and if it still needs - * more buffers it will schedule replenish */ - return; - } - - spin_lock_irqsave(&rxq->lock, flags); - - if (list_empty(&rxq->rx_used)) { - spin_unlock_irqrestore(&rxq->lock, flags); - __free_pages(page, priv->hw_params.rx_page_order); - return; - } - element = rxq->rx_used.next; - rxb = list_entry(element, struct iwl_rx_mem_buffer, list); - list_del(element); - - spin_unlock_irqrestore(&rxq->lock, flags); - - BUG_ON(rxb->page); - rxb->page = page; - /* Get physical address of the RB */ - rxb->page_dma = dma_map_page(priv->bus.dev, page, 0, - PAGE_SIZE << priv->hw_params.rx_page_order, - DMA_FROM_DEVICE); - /* dma address must be no more than 36 bits */ - BUG_ON(rxb->page_dma & ~DMA_BIT_MASK(36)); - /* and also 256 byte aligned! */ - BUG_ON(rxb->page_dma & DMA_BIT_MASK(8)); - - spin_lock_irqsave(&rxq->lock, flags); - - list_add_tail(&rxb->list, &rxq->rx_free); - rxq->free_count++; - - spin_unlock_irqrestore(&rxq->lock, flags); - } -} - -void iwlagn_rx_replenish(struct iwl_priv *priv) -{ - unsigned long flags; - - iwlagn_rx_allocate(priv, GFP_KERNEL); - - spin_lock_irqsave(&priv->lock, flags); - iwlagn_rx_queue_restock(priv); - spin_unlock_irqrestore(&priv->lock, flags); -} - -void iwlagn_rx_replenish_now(struct iwl_priv *priv) -{ - iwlagn_rx_allocate(priv, GFP_ATOMIC); - - iwlagn_rx_queue_restock(priv); -} - int iwlagn_hwrate_to_mac80211_idx(u32 rate_n_flags, enum ieee80211_band band) { int idx = 0; diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index c2a124131ef9..bd85af91c58a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -457,346 +457,6 @@ static void iwl_bg_tx_flush(struct work_struct *work) iwlagn_dev_txfifo_flush(priv, IWL_DROP_ALL); } -/** - * iwl_rx_handle - Main entry function for receiving responses from uCode - * - * Uses the priv->rx_handlers callback function array to invoke - * the appropriate handlers, including command responses, - * frame-received notifications, and other notifications. - */ -static void iwl_rx_handle(struct iwl_priv *priv) -{ - struct iwl_rx_mem_buffer *rxb; - struct iwl_rx_packet *pkt; - struct iwl_rx_queue *rxq = &priv->rxq; - u32 r, i; - int reclaim; - unsigned long flags; - u8 fill_rx = 0; - u32 count = 8; - int total_empty; - - /* uCode's read index (stored in shared DRAM) indicates the last Rx - * buffer that the driver may process (last buffer filled by ucode). */ - r = le16_to_cpu(rxq->rb_stts->closed_rb_num) & 0x0FFF; - i = rxq->read; - - /* Rx interrupt, but nothing sent from uCode */ - if (i == r) - IWL_DEBUG_RX(priv, "r = %d, i = %d\n", r, i); - - /* calculate total frames need to be restock after handling RX */ - total_empty = r - rxq->write_actual; - if (total_empty < 0) - total_empty += RX_QUEUE_SIZE; - - if (total_empty > (RX_QUEUE_SIZE / 2)) - fill_rx = 1; - - while (i != r) { - int len; - - rxb = rxq->queue[i]; - - /* If an RXB doesn't have a Rx queue slot associated with it, - * then a bug has been introduced in the queue refilling - * routines -- catch it here */ - if (WARN_ON(rxb == NULL)) { - i = (i + 1) & RX_QUEUE_MASK; - continue; - } - - rxq->queue[i] = NULL; - - dma_unmap_page(priv->bus.dev, rxb->page_dma, - PAGE_SIZE << priv->hw_params.rx_page_order, - DMA_FROM_DEVICE); - pkt = rxb_addr(rxb); - - IWL_DEBUG_RX(priv, "r = %d, i = %d, %s, 0x%02x\n", r, - i, get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd); - - len = le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK; - len += sizeof(u32); /* account for status word */ - trace_iwlwifi_dev_rx(priv, pkt, len); - - /* Reclaim a command buffer only if this packet is a response - * to a (driver-originated) command. - * If the packet (e.g. Rx frame) originated from uCode, - * there is no command buffer to reclaim. - * Ucode should set SEQ_RX_FRAME bit if ucode-originated, - * but apparently a few don't get set; catch them here. */ - reclaim = !(pkt->hdr.sequence & SEQ_RX_FRAME) && - (pkt->hdr.cmd != REPLY_RX_PHY_CMD) && - (pkt->hdr.cmd != REPLY_RX) && - (pkt->hdr.cmd != REPLY_RX_MPDU_CMD) && - (pkt->hdr.cmd != REPLY_COMPRESSED_BA) && - (pkt->hdr.cmd != STATISTICS_NOTIFICATION) && - (pkt->hdr.cmd != REPLY_TX); - - iwl_rx_dispatch(priv, rxb); - - /* - * XXX: After here, we should always check rxb->page - * against NULL before touching it or its virtual - * memory (pkt). Because some rx_handler might have - * already taken or freed the pages. - */ - - if (reclaim) { - /* Invoke any callbacks, transfer the buffer to caller, - * and fire off the (possibly) blocking - * trans_send_cmd() - * as we reclaim the driver command queue */ - if (rxb->page) - iwl_tx_cmd_complete(priv, rxb); - else - IWL_WARN(priv, "Claim null rxb?\n"); - } - - /* Reuse the page if possible. For notification packets and - * SKBs that fail to Rx correctly, add them back into the - * rx_free list for reuse later. */ - spin_lock_irqsave(&rxq->lock, flags); - if (rxb->page != NULL) { - rxb->page_dma = dma_map_page(priv->bus.dev, rxb->page, - 0, PAGE_SIZE << priv->hw_params.rx_page_order, - DMA_FROM_DEVICE); - list_add_tail(&rxb->list, &rxq->rx_free); - rxq->free_count++; - } else - list_add_tail(&rxb->list, &rxq->rx_used); - - spin_unlock_irqrestore(&rxq->lock, flags); - - i = (i + 1) & RX_QUEUE_MASK; - /* If there are a lot of unused frames, - * restock the Rx queue so ucode wont assert. */ - if (fill_rx) { - count++; - if (count >= 8) { - rxq->read = i; - iwlagn_rx_replenish_now(priv); - count = 0; - } - } - } - - /* Backtrack one entry */ - rxq->read = i; - if (fill_rx) - iwlagn_rx_replenish_now(priv); - else - iwlagn_rx_queue_restock(priv); -} - -/* tasklet for iwlagn interrupt */ -void iwl_irq_tasklet(struct iwl_priv *priv) -{ - u32 inta = 0; - u32 handled = 0; - unsigned long flags; - u32 i; -#ifdef CONFIG_IWLWIFI_DEBUG - u32 inta_mask; -#endif - - spin_lock_irqsave(&priv->lock, flags); - - /* Ack/clear/reset pending uCode interrupts. - * Note: Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS, - */ - /* There is a hardware bug in the interrupt mask function that some - * interrupts (i.e. CSR_INT_BIT_SCD) can still be generated even if - * they are disabled in the CSR_INT_MASK register. Furthermore the - * ICT interrupt handling mechanism has another bug that might cause - * these unmasked interrupts fail to be detected. We workaround the - * hardware bugs here by ACKing all the possible interrupts so that - * interrupt coalescing can still be achieved. - */ - iwl_write32(priv, CSR_INT, priv->_agn.inta | ~priv->inta_mask); - - inta = priv->_agn.inta; - -#ifdef CONFIG_IWLWIFI_DEBUG - if (iwl_get_debug_level(priv) & IWL_DL_ISR) { - /* just for debug */ - inta_mask = iwl_read32(priv, CSR_INT_MASK); - IWL_DEBUG_ISR(priv, "inta 0x%08x, enabled 0x%08x\n ", - inta, inta_mask); - } -#endif - - spin_unlock_irqrestore(&priv->lock, flags); - - /* saved interrupt in inta variable now we can reset priv->_agn.inta */ - priv->_agn.inta = 0; - - /* Now service all interrupt bits discovered above. */ - if (inta & CSR_INT_BIT_HW_ERR) { - IWL_ERR(priv, "Hardware error detected. Restarting.\n"); - - /* Tell the device to stop sending interrupts */ - iwl_disable_interrupts(priv); - - priv->isr_stats.hw++; - iwl_irq_handle_error(priv); - - handled |= CSR_INT_BIT_HW_ERR; - - return; - } - -#ifdef CONFIG_IWLWIFI_DEBUG - if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) { - /* NIC fires this, but we don't use it, redundant with WAKEUP */ - if (inta & CSR_INT_BIT_SCD) { - IWL_DEBUG_ISR(priv, "Scheduler finished to transmit " - "the frame/frames.\n"); - priv->isr_stats.sch++; - } - - /* Alive notification via Rx interrupt will do the real work */ - if (inta & CSR_INT_BIT_ALIVE) { - IWL_DEBUG_ISR(priv, "Alive interrupt\n"); - priv->isr_stats.alive++; - } - } -#endif - /* Safely ignore these bits for debug checks below */ - inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE); - - /* HW RF KILL switch toggled */ - if (inta & CSR_INT_BIT_RF_KILL) { - int hw_rf_kill = 0; - if (!(iwl_read32(priv, CSR_GP_CNTRL) & - CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)) - hw_rf_kill = 1; - - IWL_WARN(priv, "RF_KILL bit toggled to %s.\n", - hw_rf_kill ? "disable radio" : "enable radio"); - - priv->isr_stats.rfkill++; - - /* driver only loads ucode once setting the interface up. - * the driver allows loading the ucode even if the radio - * is killed. Hence update the killswitch state here. The - * rfkill handler will care about restarting if needed. - */ - if (!test_bit(STATUS_ALIVE, &priv->status)) { - if (hw_rf_kill) - set_bit(STATUS_RF_KILL_HW, &priv->status); - else - clear_bit(STATUS_RF_KILL_HW, &priv->status); - wiphy_rfkill_set_hw_state(priv->hw->wiphy, hw_rf_kill); - } - - handled |= CSR_INT_BIT_RF_KILL; - } - - /* Chip got too hot and stopped itself */ - if (inta & CSR_INT_BIT_CT_KILL) { - IWL_ERR(priv, "Microcode CT kill error detected.\n"); - priv->isr_stats.ctkill++; - handled |= CSR_INT_BIT_CT_KILL; - } - - /* Error detected by uCode */ - if (inta & CSR_INT_BIT_SW_ERR) { - IWL_ERR(priv, "Microcode SW error detected. " - " Restarting 0x%X.\n", inta); - priv->isr_stats.sw++; - iwl_irq_handle_error(priv); - handled |= CSR_INT_BIT_SW_ERR; - } - - /* uCode wakes up after power-down sleep */ - if (inta & CSR_INT_BIT_WAKEUP) { - IWL_DEBUG_ISR(priv, "Wakeup interrupt\n"); - iwl_rx_queue_update_write_ptr(priv, &priv->rxq); - for (i = 0; i < priv->hw_params.max_txq_num; i++) - iwl_txq_update_write_ptr(priv, &priv->txq[i]); - - priv->isr_stats.wakeup++; - - handled |= CSR_INT_BIT_WAKEUP; - } - - /* All uCode command responses, including Tx command responses, - * Rx "responses" (frame-received notification), and other - * notifications from uCode come through here*/ - if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX | - CSR_INT_BIT_RX_PERIODIC)) { - IWL_DEBUG_ISR(priv, "Rx interrupt\n"); - if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) { - handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX); - iwl_write32(priv, CSR_FH_INT_STATUS, - CSR_FH_INT_RX_MASK); - } - if (inta & CSR_INT_BIT_RX_PERIODIC) { - handled |= CSR_INT_BIT_RX_PERIODIC; - iwl_write32(priv, CSR_INT, CSR_INT_BIT_RX_PERIODIC); - } - /* Sending RX interrupt require many steps to be done in the - * the device: - * 1- write interrupt to current index in ICT table. - * 2- dma RX frame. - * 3- update RX shared data to indicate last write index. - * 4- send interrupt. - * This could lead to RX race, driver could receive RX interrupt - * but the shared data changes does not reflect this; - * periodic interrupt will detect any dangling Rx activity. - */ - - /* Disable periodic interrupt; we use it as just a one-shot. */ - iwl_write8(priv, CSR_INT_PERIODIC_REG, - CSR_INT_PERIODIC_DIS); - iwl_rx_handle(priv); - - /* - * Enable periodic interrupt in 8 msec only if we received - * real RX interrupt (instead of just periodic int), to catch - * any dangling Rx interrupt. If it was just the periodic - * interrupt, there was no dangling Rx activity, and no need - * to extend the periodic interrupt; one-shot is enough. - */ - if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) - iwl_write8(priv, CSR_INT_PERIODIC_REG, - CSR_INT_PERIODIC_ENA); - - priv->isr_stats.rx++; - } - - /* This "Tx" DMA channel is used only for loading uCode */ - if (inta & CSR_INT_BIT_FH_TX) { - iwl_write32(priv, CSR_FH_INT_STATUS, CSR_FH_INT_TX_MASK); - IWL_DEBUG_ISR(priv, "uCode load interrupt\n"); - priv->isr_stats.tx++; - handled |= CSR_INT_BIT_FH_TX; - /* Wake up uCode load routine, now that load is complete */ - priv->ucode_write_complete = 1; - wake_up_interruptible(&priv->wait_command_queue); - } - - if (inta & ~handled) { - IWL_ERR(priv, "Unhandled INTA bits 0x%08x\n", inta & ~handled); - priv->isr_stats.unhandled++; - } - - if (inta & ~(priv->inta_mask)) { - IWL_WARN(priv, "Disabled INTA bits 0x%08x were pending\n", - inta & ~priv->inta_mask); - } - - /* Re-enable all interrupts */ - /* only Re-enable if disabled by irq */ - if (test_bit(STATUS_INT_ENABLED, &priv->status)) - iwl_enable_interrupts(priv); - /* Re-enable RF_KILL if it occurred */ - else if (handled & CSR_INT_BIT_RF_KILL) - iwl_enable_rfkill_int(priv); -} - /***************************************************************************** * * sysfs attributes @@ -2321,19 +1981,6 @@ static void iwl_bg_restart(struct work_struct *data) } } -static void iwl_bg_rx_replenish(struct work_struct *data) -{ - struct iwl_priv *priv = - container_of(data, struct iwl_priv, rx_replenish); - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - mutex_lock(&priv->mutex); - iwlagn_rx_replenish(priv); - mutex_unlock(&priv->mutex); -} - static int iwl_mac_offchannel_tx(struct ieee80211_hw *hw, struct sk_buff *skb, struct ieee80211_channel *chan, enum nl80211_channel_type channel_type, @@ -3188,7 +2835,6 @@ static void iwl_setup_deferred_work(struct iwl_priv *priv) init_waitqueue_head(&priv->wait_command_queue); INIT_WORK(&priv->restart, iwl_bg_restart); - INIT_WORK(&priv->rx_replenish, iwl_bg_rx_replenish); INIT_WORK(&priv->beacon_update, iwl_bg_beacon_update); INIT_WORK(&priv->run_time_calib_work, iwl_bg_run_time_calib_work); INIT_WORK(&priv->tx_flush, iwl_bg_tx_flush); diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.h b/drivers/net/wireless/iwlwifi/iwl-agn.h index 6ddfd9338ee9..1655e5943694 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.h +++ b/drivers/net/wireless/iwlwifi/iwl-agn.h @@ -174,7 +174,6 @@ int iwlagn_hw_valid_rtc_data_addr(u32 addr); int iwlagn_send_tx_power(struct iwl_priv *priv); void iwlagn_temperature(struct iwl_priv *priv); u16 iwlagn_eeprom_calib_version(struct iwl_priv *priv); -int iwlagn_rx_init(struct iwl_priv *priv, struct iwl_rx_queue *rxq); int iwlagn_hw_nic_init(struct iwl_priv *priv); int iwlagn_wait_tx_queue_empty(struct iwl_priv *priv); int iwlagn_txfifo_flush(struct iwl_priv *priv, u16 flush_control); @@ -182,11 +181,6 @@ void iwlagn_dev_txfifo_flush(struct iwl_priv *priv, u16 flush_control); int iwlagn_send_beacon_cmd(struct iwl_priv *priv); /* rx */ -void iwl_irq_tasklet(struct iwl_priv *priv); -void iwlagn_rx_queue_restock(struct iwl_priv *priv); -void iwlagn_rx_allocate(struct iwl_priv *priv, gfp_t priority); -void iwlagn_rx_replenish(struct iwl_priv *priv); -void iwlagn_rx_replenish_now(struct iwl_priv *priv); int iwlagn_hwrate_to_mac80211_idx(u32 rate_n_flags, enum ieee80211_band band); void iwl_setup_rx_handlers(struct iwl_priv *priv); void iwl_rx_dispatch(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb); diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h index 2318052e094b..711d2f61e2e6 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.h +++ b/drivers/net/wireless/iwlwifi/iwl-core.h @@ -336,9 +336,6 @@ static inline void iwl_update_stats(struct iwl_priv *priv, bool is_tx, /***************************************************** * RX ******************************************************/ -void iwl_rx_queue_update_write_ptr(struct iwl_priv *priv, - struct iwl_rx_queue *q); -int iwl_rx_queue_space(const struct iwl_rx_queue *q); void iwl_tx_cmd_complete(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb); void iwl_chswitch_done(struct iwl_priv *priv, bool is_success); diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c index bd63b785f68c..05fd75fb59ac 100644 --- a/drivers/net/wireless/iwlwifi/iwl-rx.c +++ b/drivers/net/wireless/iwlwifi/iwl-rx.c @@ -41,142 +41,6 @@ #include "iwl-agn-calib.h" #include "iwl-agn.h" -/****************************************************************************** - * - * RX path functions - * - ******************************************************************************/ - -/* - * Rx theory of operation - * - * Driver allocates a circular buffer of Receive Buffer Descriptors (RBDs), - * each of which point to Receive Buffers to be filled by the NIC. These get - * used not only for Rx frames, but for any command response or notification - * from the NIC. The driver and NIC manage the Rx buffers by means - * of indexes into the circular buffer. - * - * Rx Queue Indexes - * The host/firmware share two index registers for managing the Rx buffers. - * - * The READ index maps to the first position that the firmware may be writing - * to -- the driver can read up to (but not including) this position and get - * good data. - * The READ index is managed by the firmware once the card is enabled. - * - * The WRITE index maps to the last position the driver has read from -- the - * position preceding WRITE is the last slot the firmware can place a packet. - * - * The queue is empty (no good data) if WRITE = READ - 1, and is full if - * WRITE = READ. - * - * During initialization, the host sets up the READ queue position to the first - * INDEX position, and WRITE to the last (READ - 1 wrapped) - * - * When the firmware places a packet in a buffer, it will advance the READ index - * and fire the RX interrupt. The driver can then query the READ index and - * process as many packets as possible, moving the WRITE index forward as it - * resets the Rx queue buffers with new memory. - * - * The management in the driver is as follows: - * + A list of pre-allocated SKBs is stored in iwl->rxq->rx_free. When - * iwl->rxq->free_count drops to or below RX_LOW_WATERMARK, work is scheduled - * to replenish the iwl->rxq->rx_free. - * + In iwl_rx_replenish (scheduled) if 'processed' != 'read' then the - * iwl->rxq is replenished and the READ INDEX is updated (updating the - * 'processed' and 'read' driver indexes as well) - * + A received packet is processed and handed to the kernel network stack, - * detached from the iwl->rxq. The driver 'processed' index is updated. - * + The Host/Firmware iwl->rxq is replenished at tasklet time from the rx_free - * list. If there are no allocated buffers in iwl->rxq->rx_free, the READ - * INDEX is not incremented and iwl->status(RX_STALLED) is set. If there - * were enough free buffers and RX_STALLED is set it is cleared. - * - * - * Driver sequence: - * - * iwl_rx_queue_alloc() Allocates rx_free - * iwl_rx_replenish() Replenishes rx_free list from rx_used, and calls - * iwl_rx_queue_restock - * iwl_rx_queue_restock() Moves available buffers from rx_free into Rx - * queue, updates firmware pointers, and updates - * the WRITE index. If insufficient rx_free buffers - * are available, schedules iwl_rx_replenish - * - * -- enable interrupts -- - * ISR - iwl_rx() Detach iwl_rx_mem_buffers from pool up to the - * READ INDEX, detaching the SKB from the pool. - * Moves the packet buffer from queue to rx_used. - * Calls iwl_rx_queue_restock to refill any empty - * slots. - * ... - * - */ - -/** - * iwl_rx_queue_space - Return number of free slots available in queue. - */ -int iwl_rx_queue_space(const struct iwl_rx_queue *q) -{ - int s = q->read - q->write; - if (s <= 0) - s += RX_QUEUE_SIZE; - /* keep some buffer to not confuse full and empty queue */ - s -= 2; - if (s < 0) - s = 0; - return s; -} - -/** - * iwl_rx_queue_update_write_ptr - Update the write pointer for the RX queue - */ -void iwl_rx_queue_update_write_ptr(struct iwl_priv *priv, struct iwl_rx_queue *q) -{ - unsigned long flags; - u32 reg; - - spin_lock_irqsave(&q->lock, flags); - - if (q->need_update == 0) - goto exit_unlock; - - if (priv->cfg->base_params->shadow_reg_enable) { - /* shadow register enabled */ - /* Device expects a multiple of 8 */ - q->write_actual = (q->write & ~0x7); - iwl_write32(priv, FH_RSCSR_CHNL0_WPTR, q->write_actual); - } else { - /* If power-saving is in use, make sure device is awake */ - if (test_bit(STATUS_POWER_PMI, &priv->status)) { - reg = iwl_read32(priv, CSR_UCODE_DRV_GP1); - - if (reg & CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP) { - IWL_DEBUG_INFO(priv, - "Rx queue requesting wakeup," - " GP1 = 0x%x\n", reg); - iwl_set_bit(priv, CSR_GP_CNTRL, - CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); - goto exit_unlock; - } - - q->write_actual = (q->write & ~0x7); - iwl_write_direct32(priv, FH_RSCSR_CHNL0_WPTR, - q->write_actual); - - /* Else device is assumed to be awake */ - } else { - /* Device expects a multiple of 8 */ - q->write_actual = (q->write & ~0x7); - iwl_write_direct32(priv, FH_RSCSR_CHNL0_WPTR, - q->write_actual); - } - } - q->need_update = 0; - - exit_unlock: - spin_unlock_irqrestore(&q->lock, flags); -} /****************************************************************************** * diff --git a/drivers/net/wireless/iwlwifi/iwl-trans-int-pcie.h b/drivers/net/wireless/iwlwifi/iwl-trans-int-pcie.h new file mode 100644 index 000000000000..6c56a3f75411 --- /dev/null +++ b/drivers/net/wireless/iwlwifi/iwl-trans-int-pcie.h @@ -0,0 +1,42 @@ +/****************************************************************************** + * + * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved. + * + * Portions of this file are derived from the ipw3945 project, as well + * as portions of the ieee80211 subsystem header files. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * Intel Linux Wireless <ilw@linux.intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + *****************************************************************************/ +#ifndef __iwl_trans_int_pcie_h__ +#define __iwl_trans_int_pcie_h__ + +/*This file includes the declaration that are internal to the + * trans_pcie layer */ + +void iwl_bg_rx_replenish(struct work_struct *data); +void iwl_irq_tasklet(struct iwl_priv *priv); +void iwlagn_rx_replenish(struct iwl_priv *priv); +void iwl_rx_queue_update_write_ptr(struct iwl_priv *priv, + struct iwl_rx_queue *q); + +#endif /* __iwl_trans_int_pcie_h__ */ + diff --git a/drivers/net/wireless/iwlwifi/iwl-trans-rx-pcie.c b/drivers/net/wireless/iwlwifi/iwl-trans-rx-pcie.c new file mode 100644 index 000000000000..046a33f5ca6d --- /dev/null +++ b/drivers/net/wireless/iwlwifi/iwl-trans-rx-pcie.c @@ -0,0 +1,694 @@ +/****************************************************************************** + * + * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved. + * + * Portions of this file are derived from the ipw3945 project, as well + * as portions of the ieee80211 subsystem header files. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * Intel Linux Wireless <ilw@linux.intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + *****************************************************************************/ +#include <linux/sched.h> +#include <linux/wait.h> + +#include "iwl-dev.h" +#include "iwl-agn.h" +#include "iwl-core.h" +#include "iwl-io.h" +#include "iwl-helpers.h" +#include "iwl-trans-int-pcie.h" + +/****************************************************************************** + * + * RX path functions + * + ******************************************************************************/ + +/* + * Rx theory of operation + * + * Driver allocates a circular buffer of Receive Buffer Descriptors (RBDs), + * each of which point to Receive Buffers to be filled by the NIC. These get + * used not only for Rx frames, but for any command response or notification + * from the NIC. The driver and NIC manage the Rx buffers by means + * of indexes into the circular buffer. + * + * Rx Queue Indexes + * The host/firmware share two index registers for managing the Rx buffers. + * + * The READ index maps to the first position that the firmware may be writing + * to -- the driver can read up to (but not including) this position and get + * good data. + * The READ index is managed by the firmware once the card is enabled. + * + * The WRITE index maps to the last position the driver has read from -- the + * position preceding WRITE is the last slot the firmware can place a packet. + * + * The queue is empty (no good data) if WRITE = READ - 1, and is full if + * WRITE = READ. + * + * During initialization, the host sets up the READ queue position to the first + * INDEX position, and WRITE to the last (READ - 1 wrapped) + * + * When the firmware places a packet in a buffer, it will advance the READ index + * and fire the RX interrupt. The driver can then query the READ index and + * process as many packets as possible, moving the WRITE index forward as it + * resets the Rx queue buffers with new memory. + * + * The management in the driver is as follows: + * + A list of pre-allocated SKBs is stored in iwl->rxq->rx_free. When + * iwl->rxq->free_count drops to or below RX_LOW_WATERMARK, work is scheduled + * to replenish the iwl->rxq->rx_free. + * + In iwl_rx_replenish (scheduled) if 'processed' != 'read' then the + * iwl->rxq is replenished and the READ INDEX is updated (updating the + * 'processed' and 'read' driver indexes as well) + * + A received packet is processed and handed to the kernel network stack, + * detached from the iwl->rxq. The driver 'processed' index is updated. + * + The Host/Firmware iwl->rxq is replenished at tasklet time from the rx_free + * list. If there are no allocated buffers in iwl->rxq->rx_free, the READ + * INDEX is not incremented and iwl->status(RX_STALLED) is set. If there + * were enough free buffers and RX_STALLED is set it is cleared. + * + * + * Driver sequence: + * + * iwl_rx_queue_alloc() Allocates rx_free + * iwl_rx_replenish() Replenishes rx_free list from rx_used, and calls + * iwl_rx_queue_restock + * iwl_rx_queue_restock() Moves available buffers from rx_free into Rx + * queue, updates firmware pointers, and updates + * the WRITE index. If insufficient rx_free buffers + * are available, schedules iwl_rx_replenish + * + * -- enable interrupts -- + * ISR - iwl_rx() Detach iwl_rx_mem_buffers from pool up to the + * READ INDEX, detaching the SKB from the pool. + * Moves the packet buffer from queue to rx_used. + * Calls iwl_rx_queue_restock to refill any empty + * slots. + * ... + * + */ + +/** + * iwl_rx_queue_space - Return number of free slots available in queue. + */ +static int iwl_rx_queue_space(const struct iwl_rx_queue *q) +{ + int s = q->read - q->write; + if (s <= 0) + s += RX_QUEUE_SIZE; + /* keep some buffer to not confuse full and empty queue */ + s -= 2; + if (s < 0) + s = 0; + return s; +} + +/** + * iwl_rx_queue_update_write_ptr - Update the write pointer for the RX queue + */ +void iwl_rx_queue_update_write_ptr(struct iwl_priv *priv, + struct iwl_rx_queue *q) +{ + unsigned long flags; + u32 reg; + + spin_lock_irqsave(&q->lock, flags); + + if (q->need_update == 0) + goto exit_unlock; + + if (priv->cfg->base_params->shadow_reg_enable) { + /* shadow register enabled */ + /* Device expects a multiple of 8 */ + q->write_actual = (q->write & ~0x7); + iwl_write32(priv, FH_RSCSR_CHNL0_WPTR, q->write_actual); + } else { + /* If power-saving is in use, make sure device is awake */ + if (test_bit(STATUS_POWER_PMI, &priv->status)) { + reg = iwl_read32(priv, CSR_UCODE_DRV_GP1); + + if (reg & CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP) { + IWL_DEBUG_INFO(priv, + "Rx queue requesting wakeup," + " GP1 = 0x%x\n", reg); + iwl_set_bit(priv, CSR_GP_CNTRL, + CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); + goto exit_unlock; + } + + q->write_actual = (q->write & ~0x7); + iwl_write_direct32(priv, FH_RSCSR_CHNL0_WPTR, + q->write_actual); + + /* Else device is assumed to be awake */ + } else { + /* Device expects a multiple of 8 */ + q->write_actual = (q->write & ~0x7); + iwl_write_direct32(priv, FH_RSCSR_CHNL0_WPTR, + q->write_actual); + } + } + q->need_update = 0; + + exit_unlock: + spin_unlock_irqrestore(&q->lock, flags); +} + +/** + * iwlagn_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr + */ +static inline __le32 iwlagn_dma_addr2rbd_ptr(struct iwl_priv *priv, + dma_addr_t dma_addr) +{ + return cpu_to_le32((u32)(dma_addr >> 8)); +} + +/** + * iwlagn_rx_queue_restock - refill RX queue from pre-allocated pool + * + * If there are slots in the RX queue that need to be restocked, + * and we have free pre-allocated buffers, fill the ranks as much + * as we can, pulling from rx_free. + * + * This moves the 'write' index forward to catch up with 'processed', and + * also updates the memory address in the firmware to reference the new + * target buffer. + */ +static void iwlagn_rx_queue_restock(struct iwl_priv *priv) +{ + struct iwl_rx_queue *rxq = &priv->rxq; + struct list_head *element; + struct iwl_rx_mem_buffer *rxb; + unsigned long flags; + + spin_lock_irqsave(&rxq->lock, flags); + while ((iwl_rx_queue_space(rxq) > 0) && (rxq->free_count)) { + /* The overwritten rxb must be a used one */ + rxb = rxq->queue[rxq->write]; + BUG_ON(rxb && rxb->page); + + /* Get next free Rx buffer, remove from free list */ + element = rxq->rx_free.next; + rxb = list_entry(element, struct iwl_rx_mem_buffer, list); + list_del(element); + + /* Point to Rx buffer via next RBD in circular buffer */ + rxq->bd[rxq->write] = iwlagn_dma_addr2rbd_ptr(priv, + rxb->page_dma); + rxq->queue[rxq->write] = rxb; + rxq->write = (rxq->write + 1) & RX_QUEUE_MASK; + rxq->free_count--; + } + spin_unlock_irqrestore(&rxq->lock, flags); + /* If the pre-allocated buffer pool is dropping low, schedule to + * refill it */ + if (rxq->free_count <= RX_LOW_WATERMARK) + queue_work(priv->workqueue, &priv->rx_replenish); + + + /* If we've added more space for the firmware to place data, tell it. + * Increment device's write pointer in multiples of 8. */ + if (rxq->write_actual != (rxq->write & ~0x7)) { + spin_lock_irqsave(&rxq->lock, flags); + rxq->need_update = 1; + spin_unlock_irqrestore(&rxq->lock, flags); + iwl_rx_queue_update_write_ptr(priv, rxq); + } +} + +/** + * iwlagn_rx_replenish - Move all used packet from rx_used to rx_free + * + * When moving to rx_free an SKB is allocated for the slot. + * + * Also restock the Rx queue via iwl_rx_queue_restock. + * This is called as a scheduled work item (except for during initialization) + */ +static void iwlagn_rx_allocate(struct iwl_priv *priv, gfp_t priority) +{ + struct iwl_rx_queue *rxq = &priv->rxq; + struct list_head *element; + struct iwl_rx_mem_buffer *rxb; + struct page *page; + unsigned long flags; + gfp_t gfp_mask = priority; + + while (1) { + spin_lock_irqsave(&rxq->lock, flags); + if (list_empty(&rxq->rx_used)) { + spin_unlock_irqrestore(&rxq->lock, flags); + return; + } + spin_unlock_irqrestore(&rxq->lock, flags); + + if (rxq->free_count > RX_LOW_WATERMARK) + gfp_mask |= __GFP_NOWARN; + + if (priv->hw_params.rx_page_order > 0) + gfp_mask |= __GFP_COMP; + + /* Alloc a new receive buffer */ + page = alloc_pages(gfp_mask, priv->hw_params.rx_page_order); + if (!page) { + if (net_ratelimit()) + IWL_DEBUG_INFO(priv, "alloc_pages failed, " + "order: %d\n", + priv->hw_params.rx_page_order); + + if ((rxq->free_count <= RX_LOW_WATERMARK) && + net_ratelimit()) + IWL_CRIT(priv, "Failed to alloc_pages with %s." + "Only %u free buffers remaining.\n", + priority == GFP_ATOMIC ? + "GFP_ATOMIC" : "GFP_KERNEL", + rxq->free_count); + /* We don't reschedule replenish work here -- we will + * call the restock method and if it still needs + * more buffers it will schedule replenish */ + return; + } + + spin_lock_irqsave(&rxq->lock, flags); + + if (list_empty(&rxq->rx_used)) { + spin_unlock_irqrestore(&rxq->lock, flags); + __free_pages(page, priv->hw_params.rx_page_order); + return; + } + element = rxq->rx_used.next; + rxb = list_entry(element, struct iwl_rx_mem_buffer, list); + list_del(element); + + spin_unlock_irqrestore(&rxq->lock, flags); + + BUG_ON(rxb->page); + rxb->page = page; + /* Get physical address of the RB */ + rxb->page_dma = dma_map_page(priv->bus.dev, page, 0, + PAGE_SIZE << priv->hw_params.rx_page_order, + DMA_FROM_DEVICE); + /* dma address must be no more than 36 bits */ + BUG_ON(rxb->page_dma & ~DMA_BIT_MASK(36)); + /* and also 256 byte aligned! */ + BUG_ON(rxb->page_dma & DMA_BIT_MASK(8)); + + spin_lock_irqsave(&rxq->lock, flags); + + list_add_tail(&rxb->list, &rxq->rx_free); + rxq->free_count++; + + spin_unlock_irqrestore(&rxq->lock, flags); + } +} + +void iwlagn_rx_replenish(struct iwl_priv *priv) +{ + unsigned long flags; + + iwlagn_rx_allocate(priv, GFP_KERNEL); + + spin_lock_irqsave(&priv->lock, flags); + iwlagn_rx_queue_restock(priv); + spin_unlock_irqrestore(&priv->lock, flags); +} + +static void iwlagn_rx_replenish_now(struct iwl_priv *priv) +{ + iwlagn_rx_allocate(priv, GFP_ATOMIC); + + iwlagn_rx_queue_restock(priv); +} + +void iwl_bg_rx_replenish(struct work_struct *data) +{ + struct iwl_priv *priv = + container_of(data, struct iwl_priv, rx_replenish); + + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + return; + + mutex_lock(&priv->mutex); + iwlagn_rx_replenish(priv); + mutex_unlock(&priv->mutex); +} + +/** + * iwl_rx_handle - Main entry function for receiving responses from uCode + * + * Uses the priv->rx_handlers callback function array to invoke + * the appropriate handlers, including command responses, + * frame-received notifications, and other notifications. + */ +static void iwl_rx_handle(struct iwl_priv *priv) +{ + struct iwl_rx_mem_buffer *rxb; + struct iwl_rx_packet *pkt; + struct iwl_rx_queue *rxq = &priv->rxq; + u32 r, i; + int reclaim; + unsigned long flags; + u8 fill_rx = 0; + u32 count = 8; + int total_empty; + + /* uCode's read index (stored in shared DRAM) indicates the last Rx + * buffer that the driver may process (last buffer filled by ucode). */ + r = le16_to_cpu(rxq->rb_stts->closed_rb_num) & 0x0FFF; + i = rxq->read; + + /* Rx interrupt, but nothing sent from uCode */ + if (i == r) + IWL_DEBUG_RX(priv, "r = %d, i = %d\n", r, i); + + /* calculate total frames need to be restock after handling RX */ + total_empty = r - rxq->write_actual; + if (total_empty < 0) + total_empty += RX_QUEUE_SIZE; + + if (total_empty > (RX_QUEUE_SIZE / 2)) + fill_rx = 1; + + while (i != r) { + int len; + + rxb = rxq->queue[i]; + + /* If an RXB doesn't have a Rx queue slot associated with it, + * then a bug has been introduced in the queue refilling + * routines -- catch it here */ + if (WARN_ON(rxb == NULL)) { + i = (i + 1) & RX_QUEUE_MASK; + continue; + } + + rxq->queue[i] = NULL; + + dma_unmap_page(priv->bus.dev, rxb->page_dma, + PAGE_SIZE << priv->hw_params.rx_page_order, + DMA_FROM_DEVICE); + pkt = rxb_addr(rxb); + + IWL_DEBUG_RX(priv, "r = %d, i = %d, %s, 0x%02x\n", r, + i, get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd); + + len = le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK; + len += sizeof(u32); /* account for status word */ + trace_iwlwifi_dev_rx(priv, pkt, len); + + /* Reclaim a command buffer only if this packet is a response + * to a (driver-originated) command. + * If the packet (e.g. Rx frame) originated from uCode, + * there is no command buffer to reclaim. + * Ucode should set SEQ_RX_FRAME bit if ucode-originated, + * but apparently a few don't get set; catch them here. */ + reclaim = !(pkt->hdr.sequence & SEQ_RX_FRAME) && + (pkt->hdr.cmd != REPLY_RX_PHY_CMD) && + (pkt->hdr.cmd != REPLY_RX) && + (pkt->hdr.cmd != REPLY_RX_MPDU_CMD) && + (pkt->hdr.cmd != REPLY_COMPRESSED_BA) && + (pkt->hdr.cmd != STATISTICS_NOTIFICATION) && + (pkt->hdr.cmd != REPLY_TX); + + iwl_rx_dispatch(priv, rxb); + + /* + * XXX: After here, we should always check rxb->page + * against NULL before touching it or its virtual + * memory (pkt). Because some rx_handler might have + * already taken or freed the pages. + */ + + if (reclaim) { + /* Invoke any callbacks, transfer the buffer to caller, + * and fire off the (possibly) blocking + * trans_send_cmd() + * as we reclaim the driver command queue */ + if (rxb->page) + iwl_tx_cmd_complete(priv, rxb); + else + IWL_WARN(priv, "Claim null rxb?\n"); + } + + /* Reuse the page if possible. For notification packets and + * SKBs that fail to Rx correctly, add them back into the + * rx_free list for reuse later. */ + spin_lock_irqsave(&rxq->lock, flags); + if (rxb->page != NULL) { + rxb->page_dma = dma_map_page(priv->bus.dev, rxb->page, + 0, PAGE_SIZE << priv->hw_params.rx_page_order, + DMA_FROM_DEVICE); + list_add_tail(&rxb->list, &rxq->rx_free); + rxq->free_count++; + } else + list_add_tail(&rxb->list, &rxq->rx_used); + + spin_unlock_irqrestore(&rxq->lock, flags); + + i = (i + 1) & RX_QUEUE_MASK; + /* If there are a lot of unused frames, + * restock the Rx queue so ucode wont assert. */ + if (fill_rx) { + count++; + if (count >= 8) { + rxq->read = i; + iwlagn_rx_replenish_now(priv); + count = 0; + } + } + } + + /* Backtrack one entry */ + rxq->read = i; + if (fill_rx) + iwlagn_rx_replenish_now(priv); + else + iwlagn_rx_queue_restock(priv); +} + +/* tasklet for iwlagn interrupt */ +void iwl_irq_tasklet(struct iwl_priv *priv) +{ + u32 inta = 0; + u32 handled = 0; + unsigned long flags; + u32 i; +#ifdef CONFIG_IWLWIFI_DEBUG + u32 inta_mask; +#endif + + spin_lock_irqsave(&priv->lock, flags); + + /* Ack/clear/reset pending uCode interrupts. + * Note: Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS, + */ + /* There is a hardware bug in the interrupt mask function that some + * interrupts (i.e. CSR_INT_BIT_SCD) can still be generated even if + * they are disabled in the CSR_INT_MASK register. Furthermore the + * ICT interrupt handling mechanism has another bug that might cause + * these unmasked interrupts fail to be detected. We workaround the + * hardware bugs here by ACKing all the possible interrupts so that + * interrupt coalescing can still be achieved. + */ + iwl_write32(priv, CSR_INT, priv->_agn.inta | ~priv->inta_mask); + + inta = priv->_agn.inta; + +#ifdef CONFIG_IWLWIFI_DEBUG + if (iwl_get_debug_level(priv) & IWL_DL_ISR) { + /* just for debug */ + inta_mask = iwl_read32(priv, CSR_INT_MASK); + IWL_DEBUG_ISR(priv, "inta 0x%08x, enabled 0x%08x\n ", + inta, inta_mask); + } +#endif + + spin_unlock_irqrestore(&priv->lock, flags); + + /* saved interrupt in inta variable now we can reset priv->_agn.inta */ + priv->_agn.inta = 0; + + /* Now service all interrupt bits discovered above. */ + if (inta & CSR_INT_BIT_HW_ERR) { + IWL_ERR(priv, "Hardware error detected. Restarting.\n"); + + /* Tell the device to stop sending interrupts */ + iwl_disable_interrupts(priv); + + priv->isr_stats.hw++; + iwl_irq_handle_error(priv); + + handled |= CSR_INT_BIT_HW_ERR; + + return; + } + +#ifdef CONFIG_IWLWIFI_DEBUG + if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) { + /* NIC fires this, but we don't use it, redundant with WAKEUP */ + if (inta & CSR_INT_BIT_SCD) { + IWL_DEBUG_ISR(priv, "Scheduler finished to transmit " + "the frame/frames.\n"); + priv->isr_stats.sch++; + } + + /* Alive notification via Rx interrupt will do the real work */ + if (inta & CSR_INT_BIT_ALIVE) { + IWL_DEBUG_ISR(priv, "Alive interrupt\n"); + priv->isr_stats.alive++; + } + } +#endif + /* Safely ignore these bits for debug checks below */ + inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE); + + /* HW RF KILL switch toggled */ + if (inta & CSR_INT_BIT_RF_KILL) { + int hw_rf_kill = 0; + if (!(iwl_read32(priv, CSR_GP_CNTRL) & + CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)) + hw_rf_kill = 1; + + IWL_WARN(priv, "RF_KILL bit toggled to %s.\n", + hw_rf_kill ? "disable radio" : "enable radio"); + + priv->isr_stats.rfkill++; + + /* driver only loads ucode once setting the interface up. + * the driver allows loading the ucode even if the radio + * is killed. Hence update the killswitch state here. The + * rfkill handler will care about restarting if needed. + */ + if (!test_bit(STATUS_ALIVE, &priv->status)) { + if (hw_rf_kill) + set_bit(STATUS_RF_KILL_HW, &priv->status); + else + clear_bit(STATUS_RF_KILL_HW, &priv->status); + wiphy_rfkill_set_hw_state(priv->hw->wiphy, hw_rf_kill); + } + + handled |= CSR_INT_BIT_RF_KILL; + } + + /* Chip got too hot and stopped itself */ + if (inta & CSR_INT_BIT_CT_KILL) { + IWL_ERR(priv, "Microcode CT kill error detected.\n"); + priv->isr_stats.ctkill++; + handled |= CSR_INT_BIT_CT_KILL; + } + + /* Error detected by uCode */ + if (inta & CSR_INT_BIT_SW_ERR) { + IWL_ERR(priv, "Microcode SW error detected. " + " Restarting 0x%X.\n", inta); + priv->isr_stats.sw++; + iwl_irq_handle_error(priv); + handled |= CSR_INT_BIT_SW_ERR; + } + + /* uCode wakes up after power-down sleep */ + if (inta & CSR_INT_BIT_WAKEUP) { + IWL_DEBUG_ISR(priv, "Wakeup interrupt\n"); + iwl_rx_queue_update_write_ptr(priv, &priv->rxq); + for (i = 0; i < priv->hw_params.max_txq_num; i++) + iwl_txq_update_write_ptr(priv, &priv->txq[i]); + + priv->isr_stats.wakeup++; + + handled |= CSR_INT_BIT_WAKEUP; + } + + /* All uCode command responses, including Tx command responses, + * Rx "responses" (frame-received notification), and other + * notifications from uCode come through here*/ + if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX | + CSR_INT_BIT_RX_PERIODIC)) { + IWL_DEBUG_ISR(priv, "Rx interrupt\n"); + if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) { + handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX); + iwl_write32(priv, CSR_FH_INT_STATUS, + CSR_FH_INT_RX_MASK); + } + if (inta & CSR_INT_BIT_RX_PERIODIC) { + handled |= CSR_INT_BIT_RX_PERIODIC; + iwl_write32(priv, CSR_INT, CSR_INT_BIT_RX_PERIODIC); + } + /* Sending RX interrupt require many steps to be done in the + * the device: + * 1- write interrupt to current index in ICT table. + * 2- dma RX frame. + * 3- update RX shared data to indicate last write index. + * 4- send interrupt. + * This could lead to RX race, driver could receive RX interrupt + * but the shared data changes does not reflect this; + * periodic interrupt will detect any dangling Rx activity. + */ + + /* Disable periodic interrupt; we use it as just a one-shot. */ + iwl_write8(priv, CSR_INT_PERIODIC_REG, + CSR_INT_PERIODIC_DIS); + iwl_rx_handle(priv); + + /* + * Enable periodic interrupt in 8 msec only if we received + * real RX interrupt (instead of just periodic int), to catch + * any dangling Rx interrupt. If it was just the periodic + * interrupt, there was no dangling Rx activity, and no need + * to extend the periodic interrupt; one-shot is enough. + */ + if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) + iwl_write8(priv, CSR_INT_PERIODIC_REG, + CSR_INT_PERIODIC_ENA); + + priv->isr_stats.rx++; + } + + /* This "Tx" DMA channel is used only for loading uCode */ + if (inta & CSR_INT_BIT_FH_TX) { + iwl_write32(priv, CSR_FH_INT_STATUS, CSR_FH_INT_TX_MASK); + IWL_DEBUG_ISR(priv, "uCode load interrupt\n"); + priv->isr_stats.tx++; + handled |= CSR_INT_BIT_FH_TX; + /* Wake up uCode load routine, now that load is complete */ + priv->ucode_write_complete = 1; + wake_up_interruptible(&priv->wait_command_queue); + } + + if (inta & ~handled) { + IWL_ERR(priv, "Unhandled INTA bits 0x%08x\n", inta & ~handled); + priv->isr_stats.unhandled++; + } + + if (inta & ~(priv->inta_mask)) { + IWL_WARN(priv, "Disabled INTA bits 0x%08x were pending\n", + inta & ~priv->inta_mask); + } + + /* Re-enable all interrupts */ + /* only Re-enable if disabled by irq */ + if (test_bit(STATUS_INT_ENABLED, &priv->status)) + iwl_enable_interrupts(priv); + /* Re-enable RF_KILL if it occurred */ + else if (handled & CSR_INT_BIT_RF_KILL) + iwl_enable_rfkill_int(priv); +} + diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.c b/drivers/net/wireless/iwlwifi/iwl-trans.c index ca9690287100..6b7cb73442bf 100644 --- a/drivers/net/wireless/iwlwifi/iwl-trans.c +++ b/drivers/net/wireless/iwlwifi/iwl-trans.c @@ -64,6 +64,7 @@ #include "iwl-trans.h" #include "iwl-core.h" #include "iwl-helpers.h" +#include "iwl-trans-int-pcie.h" /*TODO remove uneeded includes when the transport layer tx_free will be here */ #include "iwl-agn.h" #include "iwl-core.h" @@ -127,6 +128,55 @@ static void iwl_trans_rxq_free_rx_bufs(struct iwl_priv *priv) } } +static void iwl_trans_rx_hw_init(struct iwl_priv *priv, + struct iwl_rx_queue *rxq) +{ + u32 rb_size; + const u32 rfdnlog = RX_QUEUE_SIZE_LOG; /* 256 RBDs */ + u32 rb_timeout = 0; /* FIXME: RX_RB_TIMEOUT for all devices? */ + + rb_timeout = RX_RB_TIMEOUT; + + if (iwlagn_mod_params.amsdu_size_8K) + rb_size = FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_8K; + else + rb_size = FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_4K; + + /* Stop Rx DMA */ + iwl_write_direct32(priv, FH_MEM_RCSR_CHNL0_CONFIG_REG, 0); + + /* Reset driver's Rx queue write index */ + iwl_write_direct32(priv, FH_RSCSR_CHNL0_RBDCB_WPTR_REG, 0); + + /* Tell device where to find RBD circular buffer in DRAM */ + iwl_write_direct32(priv, FH_RSCSR_CHNL0_RBDCB_BASE_REG, + (u32)(rxq->bd_dma >> 8)); + + /* Tell device where in DRAM to update its Rx status */ + iwl_write_direct32(priv, FH_RSCSR_CHNL0_STTS_WPTR_REG, + rxq->rb_stts_dma >> 4); + + /* Enable Rx DMA + * FH_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY is set because of HW bug in + * the credit mechanism in 5000 HW RX FIFO + * Direct rx interrupts to hosts + * Rx buffer size 4 or 8k + * RB timeout 0x10 + * 256 RBDs + */ + iwl_write_direct32(priv, FH_MEM_RCSR_CHNL0_CONFIG_REG, + FH_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL | + FH_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY | + FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL | + FH_RCSR_CHNL0_RX_CONFIG_SINGLE_FRAME_MSK | + rb_size| + (rb_timeout << FH_RCSR_RX_CONFIG_REG_IRQ_RBTH_POS)| + (rfdnlog << FH_RCSR_RX_CONFIG_RBDCB_SIZE_POS)); + + /* Set interrupt coalescing timer to default (2048 usecs) */ + iwl_write8(priv, CSR_INT_COALESCING, IWL_HOST_INT_TIMEOUT_DEF); +} + static int iwl_trans_rx_init(struct iwl_priv *priv) { struct iwl_rx_queue *rxq = &priv->rxq; @@ -155,6 +205,15 @@ static int iwl_trans_rx_init(struct iwl_priv *priv) rxq->free_count = 0; spin_unlock_irqrestore(&rxq->lock, flags); + iwlagn_rx_replenish(priv); + + iwl_trans_rx_hw_init(priv, rxq); + + spin_lock_irqsave(&priv->lock, flags); + rxq->need_update = 1; + iwl_rx_queue_update_write_ptr(priv, rxq); + spin_unlock_irqrestore(&priv->lock, flags); + return 0; } @@ -756,5 +815,7 @@ int iwl_trans_register(struct iwl_priv *priv) tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long)) iwl_irq_tasklet, (unsigned long)priv); + INIT_WORK(&priv->rx_replenish, iwl_bg_rx_replenish); + return 0; } |