summaryrefslogtreecommitdiffstats
path: root/drivers/pci/hotplug/cpqphp_ctrl.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/pci/hotplug/cpqphp_ctrl.c')
-rw-r--r--drivers/pci/hotplug/cpqphp_ctrl.c371
1 files changed, 191 insertions, 180 deletions
diff --git a/drivers/pci/hotplug/cpqphp_ctrl.c b/drivers/pci/hotplug/cpqphp_ctrl.c
index cc227a8c4b11..2fa47af992a8 100644
--- a/drivers/pci/hotplug/cpqphp_ctrl.c
+++ b/drivers/pci/hotplug/cpqphp_ctrl.c
@@ -81,14 +81,15 @@ static u8 handle_switch_change(u8 change, struct controller * ctrl)
for (hp_slot = 0; hp_slot < 6; hp_slot++) {
if (change & (0x1L << hp_slot)) {
- /**********************************
+ /*
* this one changed.
- **********************************/
+ */
func = cpqhp_slot_find(ctrl->bus,
(hp_slot + ctrl->slot_device_offset), 0);
/* this is the structure that tells the worker thread
- *what to do */
+ * what to do
+ */
taskInfo = &(ctrl->event_queue[ctrl->next_event]);
ctrl->next_event = (ctrl->next_event + 1) % 10;
taskInfo->hp_slot = hp_slot;
@@ -100,17 +101,17 @@ static u8 handle_switch_change(u8 change, struct controller * ctrl)
func->presence_save |= (temp_word >> (hp_slot + 7)) & 0x02;
if (ctrl->ctrl_int_comp & (0x1L << hp_slot)) {
- /**********************************
+ /*
* Switch opened
- **********************************/
+ */
func->switch_save = 0;
taskInfo->event_type = INT_SWITCH_OPEN;
} else {
- /**********************************
+ /*
* Switch closed
- **********************************/
+ */
func->switch_save = 0x10;
@@ -131,9 +132,8 @@ static struct slot *cpqhp_find_slot(struct controller *ctrl, u8 device)
{
struct slot *slot = ctrl->slot;
- while (slot && (slot->device != device)) {
+ while (slot && (slot->device != device))
slot = slot->next;
- }
return slot;
}
@@ -152,17 +152,17 @@ static u8 handle_presence_change(u16 change, struct controller * ctrl)
if (!change)
return 0;
- /**********************************
+ /*
* Presence Change
- **********************************/
+ */
dbg("cpqsbd: Presence/Notify input change.\n");
dbg(" Changed bits are 0x%4.4x\n", change );
for (hp_slot = 0; hp_slot < 6; hp_slot++) {
if (change & (0x0101 << hp_slot)) {
- /**********************************
+ /*
* this one changed.
- **********************************/
+ */
func = cpqhp_slot_find(ctrl->bus,
(hp_slot + ctrl->slot_device_offset), 0);
@@ -177,22 +177,23 @@ static u8 handle_presence_change(u16 change, struct controller * ctrl)
return 0;
/* If the switch closed, must be a button
- * If not in button mode, nevermind */
+ * If not in button mode, nevermind
+ */
if (func->switch_save && (ctrl->push_button == 1)) {
temp_word = ctrl->ctrl_int_comp >> 16;
temp_byte = (temp_word >> hp_slot) & 0x01;
temp_byte |= (temp_word >> (hp_slot + 7)) & 0x02;
if (temp_byte != func->presence_save) {
- /**************************************
+ /*
* button Pressed (doesn't do anything)
- **************************************/
+ */
dbg("hp_slot %d button pressed\n", hp_slot);
taskInfo->event_type = INT_BUTTON_PRESS;
} else {
- /**********************************
+ /*
* button Released - TAKE ACTION!!!!
- **********************************/
+ */
dbg("hp_slot %d button released\n", hp_slot);
taskInfo->event_type = INT_BUTTON_RELEASE;
@@ -210,7 +211,8 @@ static u8 handle_presence_change(u16 change, struct controller * ctrl)
}
} else {
/* Switch is open, assume a presence change
- * Save the presence state */
+ * Save the presence state
+ */
temp_word = ctrl->ctrl_int_comp >> 16;
func->presence_save = (temp_word >> hp_slot) & 0x01;
func->presence_save |= (temp_word >> (hp_slot + 7)) & 0x02;
@@ -241,17 +243,17 @@ static u8 handle_power_fault(u8 change, struct controller * ctrl)
if (!change)
return 0;
- /**********************************
+ /*
* power fault
- **********************************/
+ */
info("power fault interrupt\n");
for (hp_slot = 0; hp_slot < 6; hp_slot++) {
if (change & (0x01 << hp_slot)) {
- /**********************************
+ /*
* this one changed.
- **********************************/
+ */
func = cpqhp_slot_find(ctrl->bus,
(hp_slot + ctrl->slot_device_offset), 0);
@@ -262,16 +264,16 @@ static u8 handle_power_fault(u8 change, struct controller * ctrl)
rc++;
if (ctrl->ctrl_int_comp & (0x00000100 << hp_slot)) {
- /**********************************
+ /*
* power fault Cleared
- **********************************/
+ */
func->status = 0x00;
taskInfo->event_type = INT_POWER_FAULT_CLEAR;
} else {
- /**********************************
+ /*
* power fault
- **********************************/
+ */
taskInfo->event_type = INT_POWER_FAULT;
if (ctrl->rev < 4) {
@@ -432,13 +434,15 @@ static struct pci_resource *do_pre_bridge_resource_split(struct pci_resource **h
/* If we got here, there the bridge requires some of the resource, but
- * we may be able to split some off of the front */
+ * we may be able to split some off of the front
+ */
node = *head;
if (node->length & (alignment -1)) {
/* this one isn't an aligned length, so we'll make a new entry
- * and split it up. */
+ * and split it up.
+ */
split_node = kmalloc(sizeof(*split_node), GFP_KERNEL);
if (!split_node)
@@ -544,10 +548,10 @@ static struct pci_resource *get_io_resource(struct pci_resource **head, u32 size
if (!(*head))
return NULL;
- if ( cpqhp_resource_sort_and_combine(head) )
+ if (cpqhp_resource_sort_and_combine(head))
return NULL;
- if ( sort_by_size(head) )
+ if (sort_by_size(head))
return NULL;
for (node = *head; node; node = node->next) {
@@ -556,7 +560,8 @@ static struct pci_resource *get_io_resource(struct pci_resource **head, u32 size
if (node->base & (size - 1)) {
/* this one isn't base aligned properly
- * so we'll make a new entry and split it up */
+ * so we'll make a new entry and split it up
+ */
temp_dword = (node->base | (size-1)) + 1;
/* Short circuit if adjusted size is too small */
@@ -581,7 +586,8 @@ static struct pci_resource *get_io_resource(struct pci_resource **head, u32 size
/* Don't need to check if too small since we already did */
if (node->length > size) {
/* this one is longer than we need
- * so we'll make a new entry and split it up */
+ * so we'll make a new entry and split it up
+ */
split_node = kmalloc(sizeof(*split_node), GFP_KERNEL);
if (!split_node)
@@ -601,7 +607,8 @@ static struct pci_resource *get_io_resource(struct pci_resource **head, u32 size
continue;
/* If we got here, then it is the right size
- * Now take it out of the list and break */
+ * Now take it out of the list and break
+ */
if (*head == node) {
*head = node->next;
} else {
@@ -642,14 +649,16 @@ static struct pci_resource *get_max_resource(struct pci_resource **head, u32 siz
return NULL;
for (max = *head; max; max = max->next) {
- /* If not big enough we could probably just bail,
- * instead we'll continue to the next. */
+ /* If not big enough we could probably just bail,
+ * instead we'll continue to the next.
+ */
if (max->length < size)
continue;
if (max->base & (size - 1)) {
/* this one isn't base aligned properly
- * so we'll make a new entry and split it up */
+ * so we'll make a new entry and split it up
+ */
temp_dword = (max->base | (size-1)) + 1;
/* Short circuit if adjusted size is too small */
@@ -672,7 +681,8 @@ static struct pci_resource *get_max_resource(struct pci_resource **head, u32 siz
if ((max->base + max->length) & (size - 1)) {
/* this one isn't end aligned properly at the top
- * so we'll make a new entry and split it up */
+ * so we'll make a new entry and split it up
+ */
split_node = kmalloc(sizeof(*split_node), GFP_KERNEL);
if (!split_node)
@@ -744,7 +754,8 @@ static struct pci_resource *get_resource(struct pci_resource **head, u32 size)
if (node->base & (size - 1)) {
dbg("%s: not aligned\n", __func__);
/* this one isn't base aligned properly
- * so we'll make a new entry and split it up */
+ * so we'll make a new entry and split it up
+ */
temp_dword = (node->base | (size-1)) + 1;
/* Short circuit if adjusted size is too small */
@@ -769,7 +780,8 @@ static struct pci_resource *get_resource(struct pci_resource **head, u32 size)
if (node->length > size) {
dbg("%s: too big\n", __func__);
/* this one is longer than we need
- * so we'll make a new entry and split it up */
+ * so we'll make a new entry and split it up
+ */
split_node = kmalloc(sizeof(*split_node), GFP_KERNEL);
if (!split_node)
@@ -886,19 +898,19 @@ irqreturn_t cpqhp_ctrl_intr(int IRQ, void *data)
u32 Diff;
u32 temp_dword;
-
+
misc = readw(ctrl->hpc_reg + MISC);
- /***************************************
+ /*
* Check to see if it was our interrupt
- ***************************************/
+ */
if (!(misc & 0x000C)) {
return IRQ_NONE;
}
if (misc & 0x0004) {
- /**********************************
+ /*
* Serial Output interrupt Pending
- **********************************/
+ */
/* Clear the interrupt */
misc |= 0x0004;
@@ -961,11 +973,8 @@ struct pci_func *cpqhp_slot_create(u8 busnumber)
struct pci_func *next;
new_slot = kzalloc(sizeof(*new_slot), GFP_KERNEL);
- if (new_slot == NULL) {
- /* I'm not dead yet!
- * You will be. */
+ if (new_slot == NULL)
return new_slot;
- }
new_slot->next = NULL;
new_slot->configured = 1;
@@ -996,10 +1005,8 @@ static int slot_remove(struct pci_func * old_slot)
return 1;
next = cpqhp_slot_list[old_slot->bus];
-
- if (next == NULL) {
+ if (next == NULL)
return 1;
- }
if (next == old_slot) {
cpqhp_slot_list[old_slot->bus] = old_slot->next;
@@ -1008,9 +1015,8 @@ static int slot_remove(struct pci_func * old_slot)
return 0;
}
- while ((next->next != old_slot) && (next->next != NULL)) {
+ while ((next->next != old_slot) && (next->next != NULL))
next = next->next;
- }
if (next->next == old_slot) {
next->next = old_slot->next;
@@ -1040,9 +1046,8 @@ static int bridge_slot_remove(struct pci_func *bridge)
for (tempBus = secondaryBus; tempBus <= subordinateBus; tempBus++) {
next = cpqhp_slot_list[tempBus];
- while (!slot_remove(next)) {
+ while (!slot_remove(next))
next = cpqhp_slot_list[tempBus];
- }
}
next = cpqhp_slot_list[bridge->bus];
@@ -1130,39 +1135,43 @@ static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_
u8 slot_power = readb(ctrl->hpc_reg + SLOT_POWER);
u16 reg16;
u32 leds = readl(ctrl->hpc_reg + LED_CONTROL);
-
+
if (ctrl->speed == adapter_speed)
return 0;
-
+
/* We don't allow freq/mode changes if we find another adapter running
- * in another slot on this controller */
+ * in another slot on this controller
+ */
for(slot = ctrl->slot; slot; slot = slot->next) {
- if (slot->device == (hp_slot + ctrl->slot_device_offset))
+ if (slot->device == (hp_slot + ctrl->slot_device_offset))
continue;
if (!slot->hotplug_slot || !slot->hotplug_slot->info)
continue;
- if (slot->hotplug_slot->info->adapter_status == 0)
+ if (slot->hotplug_slot->info->adapter_status == 0)
continue;
/* If another adapter is running on the same segment but at a
* lower speed/mode, we allow the new adapter to function at
- * this rate if supported */
- if (ctrl->speed < adapter_speed)
+ * this rate if supported
+ */
+ if (ctrl->speed < adapter_speed)
return 0;
return 1;
}
-
+
/* If the controller doesn't support freq/mode changes and the
- * controller is running at a higher mode, we bail */
+ * controller is running at a higher mode, we bail
+ */
if ((ctrl->speed > adapter_speed) && (!ctrl->pcix_speed_capability))
return 1;
-
+
/* But we allow the adapter to run at a lower rate if possible */
if ((ctrl->speed < adapter_speed) && (!ctrl->pcix_speed_capability))
return 0;
/* We try to set the max speed supported by both the adapter and
- * controller */
+ * controller
+ */
if (ctrl->speed_capability < adapter_speed) {
if (ctrl->speed == ctrl->speed_capability)
return 0;
@@ -1171,22 +1180,22 @@ static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_
writel(0x0L, ctrl->hpc_reg + LED_CONTROL);
writeb(0x00, ctrl->hpc_reg + SLOT_ENABLE);
-
- set_SOGO(ctrl);
+
+ set_SOGO(ctrl);
wait_for_ctrl_irq(ctrl);
-
+
if (adapter_speed != PCI_SPEED_133MHz_PCIX)
reg = 0xF5;
else
- reg = 0xF4;
+ reg = 0xF4;
pci_write_config_byte(ctrl->pci_dev, 0x41, reg);
-
+
reg16 = readw(ctrl->hpc_reg + NEXT_CURR_FREQ);
reg16 &= ~0x000F;
switch(adapter_speed) {
- case(PCI_SPEED_133MHz_PCIX):
+ case(PCI_SPEED_133MHz_PCIX):
reg = 0x75;
- reg16 |= 0xB;
+ reg16 |= 0xB;
break;
case(PCI_SPEED_100MHz_PCIX):
reg = 0x74;
@@ -1203,48 +1212,48 @@ static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_
default: /* 33MHz PCI 2.2 */
reg = 0x71;
break;
-
+
}
reg16 |= 0xB << 12;
writew(reg16, ctrl->hpc_reg + NEXT_CURR_FREQ);
-
- mdelay(5);
-
+
+ mdelay(5);
+
/* Reenable interrupts */
writel(0, ctrl->hpc_reg + INT_MASK);
- pci_write_config_byte(ctrl->pci_dev, 0x41, reg);
-
+ pci_write_config_byte(ctrl->pci_dev, 0x41, reg);
+
/* Restart state machine */
reg = ~0xF;
pci_read_config_byte(ctrl->pci_dev, 0x43, &reg);
pci_write_config_byte(ctrl->pci_dev, 0x43, reg);
-
+
/* Only if mode change...*/
if (((ctrl->speed == PCI_SPEED_66MHz) && (adapter_speed == PCI_SPEED_66MHz_PCIX)) ||
((ctrl->speed == PCI_SPEED_66MHz_PCIX) && (adapter_speed == PCI_SPEED_66MHz)))
set_SOGO(ctrl);
-
+
wait_for_ctrl_irq(ctrl);
mdelay(1100);
-
+
/* Restore LED/Slot state */
writel(leds, ctrl->hpc_reg + LED_CONTROL);
writeb(slot_power, ctrl->hpc_reg + SLOT_ENABLE);
-
+
set_SOGO(ctrl);
wait_for_ctrl_irq(ctrl);
ctrl->speed = adapter_speed;
slot = cpqhp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
- info("Successfully changed frequency/mode for adapter in slot %d\n",
+ info("Successfully changed frequency/mode for adapter in slot %d\n",
slot->number);
return 0;
}
-/* the following routines constitute the bulk of the
- hotplug controller logic
+/* the following routines constitute the bulk of the
+ * hotplug controller logic
*/
@@ -1268,17 +1277,17 @@ static u32 board_replaced(struct pci_func *func, struct controller *ctrl)
hp_slot = func->device - ctrl->slot_device_offset;
- if (readl(ctrl->hpc_reg + INT_INPUT_CLEAR) & (0x01L << hp_slot)) {
- /**********************************
- * The switch is open.
- **********************************/
+ /*
+ * The switch is open.
+ */
+ if (readl(ctrl->hpc_reg + INT_INPUT_CLEAR) & (0x01L << hp_slot))
rc = INTERLOCK_OPEN;
- } else if (is_slot_enabled (ctrl, hp_slot)) {
- /**********************************
- * The board is already on
- **********************************/
+ /*
+ * The board is already on
+ */
+ else if (is_slot_enabled (ctrl, hp_slot))
rc = CARD_FUNCTIONING;
- } else {
+ else {
mutex_lock(&ctrl->crit_sect);
/* turn on board without attaching to the bus */
@@ -1299,7 +1308,7 @@ static u32 board_replaced(struct pci_func *func, struct controller *ctrl)
/* Wait for SOBS to be unset */
wait_for_ctrl_irq (ctrl);
-
+
adapter_speed = get_adapter_speed(ctrl, hp_slot);
if (ctrl->speed != adapter_speed)
if (set_controller_speed(ctrl, adapter_speed, hp_slot))
@@ -1352,7 +1361,8 @@ static u32 board_replaced(struct pci_func *func, struct controller *ctrl)
* Get slot won't work for devices behind
* bridges, but in this case it will always be
* called for the "base" bus/dev/func of an
- * adapter. */
+ * adapter.
+ */
mutex_lock(&ctrl->crit_sect);
@@ -1377,7 +1387,8 @@ static u32 board_replaced(struct pci_func *func, struct controller *ctrl)
* Get slot won't work for devices behind bridges, but
* in this case it will always be called for the "base"
- * bus/dev/func of an adapter. */
+ * bus/dev/func of an adapter.
+ */
mutex_lock(&ctrl->crit_sect);
@@ -1434,7 +1445,8 @@ static u32 board_added(struct pci_func *func, struct controller *ctrl)
wait_for_ctrl_irq (ctrl);
/* Change bits in slot power register to force another shift out
- * NOTE: this is to work around the timer bug */
+ * NOTE: this is to work around the timer bug
+ */
temp_byte = readb(ctrl->hpc_reg + SLOT_POWER);
writeb(0x00, ctrl->hpc_reg + SLOT_POWER);
writeb(temp_byte, ctrl->hpc_reg + SLOT_POWER);
@@ -1443,12 +1455,12 @@ static u32 board_added(struct pci_func *func, struct controller *ctrl)
/* Wait for SOBS to be unset */
wait_for_ctrl_irq (ctrl);
-
+
adapter_speed = get_adapter_speed(ctrl, hp_slot);
if (ctrl->speed != adapter_speed)
if (set_controller_speed(ctrl, adapter_speed, hp_slot))
rc = WRONG_BUS_FREQUENCY;
-
+
/* turn off board without attaching to the bus */
disable_slot_power (ctrl, hp_slot);
@@ -1461,7 +1473,7 @@ static u32 board_added(struct pci_func *func, struct controller *ctrl)
if (rc)
return rc;
-
+
p_slot = cpqhp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
/* turn on board and blink green LED */
@@ -1521,7 +1533,7 @@ static u32 board_added(struct pci_func *func, struct controller *ctrl)
}
/* All F's is an empty slot or an invalid board */
- if (temp_register != 0xFFFFFFFF) { /* Check for a board in the slot */
+ if (temp_register != 0xFFFFFFFF) {
res_lists.io_head = ctrl->io_head;
res_lists.mem_head = ctrl->mem_head;
res_lists.p_mem_head = ctrl->p_mem_head;
@@ -1570,9 +1582,8 @@ static u32 board_added(struct pci_func *func, struct controller *ctrl)
index = 0;
do {
new_slot = cpqhp_slot_find(ctrl->bus, func->device, index++);
- if (new_slot && !new_slot->pci_dev) {
+ if (new_slot && !new_slot->pci_dev)
cpqhp_configure_device(ctrl, new_slot);
- }
} while (new_slot);
mutex_lock(&ctrl->crit_sect);
@@ -1859,12 +1870,12 @@ static void interrupt_event_handler(struct controller *ctrl)
info(msg_button_on, p_slot->number);
}
mutex_lock(&ctrl->crit_sect);
-
+
dbg("blink green LED and turn off amber\n");
-
+
amber_LED_off (ctrl, hp_slot);
green_LED_blink (ctrl, hp_slot);
-
+
set_SOGO(ctrl);
/* Wait for SOBS to be unset */
@@ -1958,7 +1969,7 @@ void cpqhp_pushbutton_thread(unsigned long slot)
if (cpqhp_process_SI(ctrl, func) != 0) {
amber_LED_on(ctrl, hp_slot);
green_LED_off(ctrl, hp_slot);
-
+
set_SOGO(ctrl);
/* Wait for SOBS to be unset */
@@ -2079,7 +2090,7 @@ int cpqhp_process_SS(struct controller *ctrl, struct pci_func *func)
struct pci_bus *pci_bus = ctrl->pci_bus;
int physical_slot=0;
- device = func->device;
+ device = func->device;
func = cpqhp_slot_find(ctrl->bus, device, index++);
p_slot = cpqhp_find_slot(ctrl, device);
if (p_slot) {
@@ -2113,9 +2124,8 @@ int cpqhp_process_SS(struct controller *ctrl, struct pci_func *func)
/* If the VGA Enable bit is set, remove isn't
* supported */
- if (BCR & PCI_BRIDGE_CTL_VGA) {
+ if (BCR & PCI_BRIDGE_CTL_VGA)
rc = REMOVE_NOT_SUPPORTED;
- }
}
}
@@ -2183,67 +2193,67 @@ int cpqhp_hardware_test(struct controller *ctrl, int test_num)
num_of_slots = readb(ctrl->hpc_reg + SLOT_MASK) & 0x0f;
switch (test_num) {
- case 1:
- /* Do stuff here! */
-
- /* Do that funky LED thing */
- /* so we can restore them later */
- save_LED = readl(ctrl->hpc_reg + LED_CONTROL);
- work_LED = 0x01010101;
- switch_leds(ctrl, num_of_slots, &work_LED, 0);
- switch_leds(ctrl, num_of_slots, &work_LED, 1);
- switch_leds(ctrl, num_of_slots, &work_LED, 0);
- switch_leds(ctrl, num_of_slots, &work_LED, 1);
-
- work_LED = 0x01010000;
- writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
- switch_leds(ctrl, num_of_slots, &work_LED, 0);
- switch_leds(ctrl, num_of_slots, &work_LED, 1);
- work_LED = 0x00000101;
- writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
- switch_leds(ctrl, num_of_slots, &work_LED, 0);
- switch_leds(ctrl, num_of_slots, &work_LED, 1);
+ case 1:
+ /* Do stuff here! */
+
+ /* Do that funky LED thing */
+ /* so we can restore them later */
+ save_LED = readl(ctrl->hpc_reg + LED_CONTROL);
+ work_LED = 0x01010101;
+ switch_leds(ctrl, num_of_slots, &work_LED, 0);
+ switch_leds(ctrl, num_of_slots, &work_LED, 1);
+ switch_leds(ctrl, num_of_slots, &work_LED, 0);
+ switch_leds(ctrl, num_of_slots, &work_LED, 1);
+
+ work_LED = 0x01010000;
+ writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
+ switch_leds(ctrl, num_of_slots, &work_LED, 0);
+ switch_leds(ctrl, num_of_slots, &work_LED, 1);
+ work_LED = 0x00000101;
+ writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
+ switch_leds(ctrl, num_of_slots, &work_LED, 0);
+ switch_leds(ctrl, num_of_slots, &work_LED, 1);
+
+ work_LED = 0x01010000;
+ writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
+ for (loop = 0; loop < num_of_slots; loop++) {
+ set_SOGO(ctrl);
- work_LED = 0x01010000;
- writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
- for (loop = 0; loop < num_of_slots; loop++) {
- set_SOGO(ctrl);
+ /* Wait for SOGO interrupt */
+ wait_for_ctrl_irq (ctrl);
- /* Wait for SOGO interrupt */
- wait_for_ctrl_irq (ctrl);
+ /* Get ready for next iteration */
+ long_delay((3*HZ)/10);
+ work_LED = work_LED >> 16;
+ writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
- /* Get ready for next iteration */
- long_delay((3*HZ)/10);
- work_LED = work_LED >> 16;
- writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
-
- set_SOGO(ctrl);
+ set_SOGO(ctrl);
- /* Wait for SOGO interrupt */
- wait_for_ctrl_irq (ctrl);
+ /* Wait for SOGO interrupt */
+ wait_for_ctrl_irq (ctrl);
- /* Get ready for next iteration */
- long_delay((3*HZ)/10);
- work_LED = work_LED << 16;
- writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
- work_LED = work_LED << 1;
- writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
- }
+ /* Get ready for next iteration */
+ long_delay((3*HZ)/10);
+ work_LED = work_LED << 16;
+ writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
+ work_LED = work_LED << 1;
+ writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
+ }
- /* put it back the way it was */
- writel(save_LED, ctrl->hpc_reg + LED_CONTROL);
+ /* put it back the way it was */
+ writel(save_LED, ctrl->hpc_reg + LED_CONTROL);
- set_SOGO(ctrl);
+ set_SOGO(ctrl);
- /* Wait for SOBS to be unset */
- wait_for_ctrl_irq (ctrl);
- break;
- case 2:
- /* Do other stuff here! */
- break;
- case 3:
- /* and more... */
- break;
+ /* Wait for SOBS to be unset */
+ wait_for_ctrl_irq (ctrl);
+ break;
+ case 2:
+ /* Do other stuff here! */
+ break;
+ case 3:
+ /* and more... */
+ break;
}
return 0;
}
@@ -2312,9 +2322,9 @@ static u32 configure_new_device(struct controller * ctrl, struct pci_func * func
while ((function < max_functions) && (!stop_it)) {
pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(func->device, function), 0x00, &ID);
- if (ID == 0xFFFFFFFF) { /* There's nothing there. */
+ if (ID == 0xFFFFFFFF) {
function++;
- } else { /* There's something there */
+ } else {
/* Setup slot structure. */
new_slot = cpqhp_slot_create(func->bus);
@@ -2339,8 +2349,8 @@ static u32 configure_new_device(struct controller * ctrl, struct pci_func * func
/*
- Configuration logic that involves the hotplug data structures and
- their bookkeeping
+ * Configuration logic that involves the hotplug data structures and
+ * their bookkeeping
*/
@@ -2393,7 +2403,7 @@ static int configure_new_function(struct controller *ctrl, struct pci_func *func
if (rc)
return rc;
- if ((temp_byte & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { /* PCI-PCI Bridge */
+ if ((temp_byte & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
/* set Primary bus */
dbg("set Primary bus = %d\n", func->bus);
rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_PRIMARY_BUS, func->bus);
@@ -2484,7 +2494,8 @@ static int configure_new_function(struct controller *ctrl, struct pci_func *func
temp_resources.irqs = &irqs;
/* Make copies of the nodes we are going to pass down so that
- * if there is a problem,we can just use these to free resources */
+ * if there is a problem,we can just use these to free resources
+ */
hold_bus_node = kmalloc(sizeof(*hold_bus_node), GFP_KERNEL);
hold_IO_node = kmalloc(sizeof(*hold_IO_node), GFP_KERNEL);
hold_mem_node = kmalloc(sizeof(*hold_mem_node), GFP_KERNEL);
@@ -2556,7 +2567,8 @@ static int configure_new_function(struct controller *ctrl, struct pci_func *func
temp_word = (p_mem_node->base + p_mem_node->length - 1) >> 16;
rc = pci_bus_write_config_word (pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, temp_word);
- /* Adjust this to compensate for extra adjustment in first loop */
+ /* Adjust this to compensate for extra adjustment in first loop
+ */
irqs.barber_pole--;
rc = 0;
@@ -2917,27 +2929,26 @@ static int configure_new_function(struct controller *ctrl, struct pci_func *func
} /* End of base register loop */
if (cpqhp_legacy_mode) {
/* Figure out which interrupt pin this function uses */
- rc = pci_bus_read_config_byte (pci_bus, devfn,
+ rc = pci_bus_read_config_byte (pci_bus, devfn,
PCI_INTERRUPT_PIN, &temp_byte);
/* If this function needs an interrupt and we are behind
* a bridge and the pin is tied to something that's
* alread mapped, set this one the same */
- if (temp_byte && resources->irqs &&
- (resources->irqs->valid_INT &
+ if (temp_byte && resources->irqs &&
+ (resources->irqs->valid_INT &
(0x01 << ((temp_byte + resources->irqs->barber_pole - 1) & 0x03)))) {
/* We have to share with something already set up */
- IRQ = resources->irqs->interrupt[(temp_byte +
+ IRQ = resources->irqs->interrupt[(temp_byte +
resources->irqs->barber_pole - 1) & 0x03];
} else {
/* Program IRQ based on card type */
rc = pci_bus_read_config_byte (pci_bus, devfn, 0x0B, &class_code);
- if (class_code == PCI_BASE_CLASS_STORAGE) {
+ if (class_code == PCI_BASE_CLASS_STORAGE)
IRQ = cpqhp_disk_irq;
- } else {
+ else
IRQ = cpqhp_nic_irq;
- }
}
/* IRQ Line */
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-17 15:19:16 +0000