summaryrefslogtreecommitdiffstats
path: root/drivers/pci/pci.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/pci/pci.c')
-rw-r--r--drivers/pci/pci.c479
1 files changed, 350 insertions, 129 deletions
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index e4548ab2a93c..44a46c92b721 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1,6 +1,4 @@
/*
- * $Id: pci.c,v 1.91 1999/01/21 13:34:01 davem Exp $
- *
* PCI Bus Services, see include/linux/pci.h for further explanation.
*
* Copyright 1993 -- 1997 Drew Eckhardt, Frederic Potter,
@@ -19,6 +17,7 @@
#include <linux/string.h>
#include <linux/log2.h>
#include <linux/pci-aspm.h>
+#include <linux/pm_wakeup.h>
#include <asm/dma.h> /* isa_dma_bridge_buggy */
#include "pci.h"
@@ -378,74 +377,90 @@ pci_restore_bars(struct pci_dev *dev)
pci_update_resource(dev, &dev->resource[i], i);
}
-int (*platform_pci_set_power_state)(struct pci_dev *dev, pci_power_t t);
+static struct pci_platform_pm_ops *pci_platform_pm;
-/**
- * pci_set_power_state - Set the power state of a PCI device
- * @dev: PCI device to be suspended
- * @state: PCI power state (D0, D1, D2, D3hot, D3cold) we're entering
- *
- * Transition a device to a new power state, using the Power Management
- * Capabilities in the device's config space.
- *
- * RETURN VALUE:
- * -EINVAL if trying to enter a lower state than we're already in.
- * 0 if we're already in the requested state.
- * -EIO if device does not support PCI PM.
- * 0 if we can successfully change the power state.
- */
-int
-pci_set_power_state(struct pci_dev *dev, pci_power_t state)
+int pci_set_platform_pm(struct pci_platform_pm_ops *ops)
{
- int pm, need_restore = 0;
- u16 pmcsr, pmc;
+ if (!ops->is_manageable || !ops->set_state || !ops->choose_state
+ || !ops->sleep_wake || !ops->can_wakeup)
+ return -EINVAL;
+ pci_platform_pm = ops;
+ return 0;
+}
- /* bound the state we're entering */
- if (state > PCI_D3hot)
- state = PCI_D3hot;
+static inline bool platform_pci_power_manageable(struct pci_dev *dev)
+{
+ return pci_platform_pm ? pci_platform_pm->is_manageable(dev) : false;
+}
- /*
- * If the device or the parent bridge can't support PCI PM, ignore
- * the request if we're doing anything besides putting it into D0
- * (which would only happen on boot).
- */
- if ((state == PCI_D1 || state == PCI_D2) && pci_no_d1d2(dev))
- return 0;
+static inline int platform_pci_set_power_state(struct pci_dev *dev,
+ pci_power_t t)
+{
+ return pci_platform_pm ? pci_platform_pm->set_state(dev, t) : -ENOSYS;
+}
- /* find PCI PM capability in list */
- pm = pci_find_capability(dev, PCI_CAP_ID_PM);
+static inline pci_power_t platform_pci_choose_state(struct pci_dev *dev)
+{
+ return pci_platform_pm ?
+ pci_platform_pm->choose_state(dev) : PCI_POWER_ERROR;
+}
- /* abort if the device doesn't support PM capabilities */
- if (!pm)
+static inline bool platform_pci_can_wakeup(struct pci_dev *dev)
+{
+ return pci_platform_pm ? pci_platform_pm->can_wakeup(dev) : false;
+}
+
+static inline int platform_pci_sleep_wake(struct pci_dev *dev, bool enable)
+{
+ return pci_platform_pm ?
+ pci_platform_pm->sleep_wake(dev, enable) : -ENODEV;
+}
+
+/**
+ * pci_raw_set_power_state - Use PCI PM registers to set the power state of
+ * given PCI device
+ * @dev: PCI device to handle.
+ * @state: PCI power state (D0, D1, D2, D3hot) to put the device into.
+ *
+ * RETURN VALUE:
+ * -EINVAL if the requested state is invalid.
+ * -EIO if device does not support PCI PM or its PM capabilities register has a
+ * wrong version, or device doesn't support the requested state.
+ * 0 if device already is in the requested state.
+ * 0 if device's power state has been successfully changed.
+ */
+static int
+pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state)
+{
+ u16 pmcsr;
+ bool need_restore = false;
+
+ if (!dev->pm_cap)
return -EIO;
+ if (state < PCI_D0 || state > PCI_D3hot)
+ return -EINVAL;
+
/* Validate current state:
* Can enter D0 from any state, but if we can only go deeper
* to sleep if we're already in a low power state
*/
- if (state != PCI_D0 && dev->current_state > state) {
- printk(KERN_ERR "%s(): %s: state=%d, current state=%d\n",
- __func__, pci_name(dev), state, dev->current_state);
+ if (dev->current_state == state) {
+ /* we're already there */
+ return 0;
+ } else if (state != PCI_D0 && dev->current_state <= PCI_D3cold
+ && dev->current_state > state) {
+ dev_err(&dev->dev, "invalid power transition "
+ "(from state %d to %d)\n", dev->current_state, state);
return -EINVAL;
- } else if (dev->current_state == state)
- return 0; /* we're already there */
-
-
- pci_read_config_word(dev,pm + PCI_PM_PMC,&pmc);
- if ((pmc & PCI_PM_CAP_VER_MASK) > 3) {
- printk(KERN_DEBUG
- "PCI: %s has unsupported PM cap regs version (%u)\n",
- pci_name(dev), pmc & PCI_PM_CAP_VER_MASK);
- return -EIO;
}
/* check if this device supports the desired state */
- if (state == PCI_D1 && !(pmc & PCI_PM_CAP_D1))
- return -EIO;
- else if (state == PCI_D2 && !(pmc & PCI_PM_CAP_D2))
+ if ((state == PCI_D1 && !dev->d1_support)
+ || (state == PCI_D2 && !dev->d2_support))
return -EIO;
- pci_read_config_word(dev, pm + PCI_PM_CTRL, &pmcsr);
+ pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
/* If we're (effectively) in D3, force entire word to 0.
* This doesn't affect PME_Status, disables PME_En, and
@@ -461,7 +476,7 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state)
case PCI_UNKNOWN: /* Boot-up */
if ((pmcsr & PCI_PM_CTRL_STATE_MASK) == PCI_D3hot
&& !(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET))
- need_restore = 1;
+ need_restore = true;
/* Fall-through: force to D0 */
default:
pmcsr = 0;
@@ -469,7 +484,7 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state)
}
/* enter specified state */
- pci_write_config_word(dev, pm + PCI_PM_CTRL, pmcsr);
+ pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pmcsr);
/* Mandatory power management transition delays */
/* see PCI PM 1.1 5.6.1 table 18 */
@@ -478,13 +493,6 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state)
else if (state == PCI_D2 || dev->current_state == PCI_D2)
udelay(200);
- /*
- * Give firmware a chance to be called, such as ACPI _PRx, _PSx
- * Firmware method after native method ?
- */
- if (platform_pci_set_power_state)
- platform_pci_set_power_state(dev, state);
-
dev->current_state = state;
/* According to section 5.4.1 of the "PCI BUS POWER MANAGEMENT
@@ -508,8 +516,77 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state)
return 0;
}
-pci_power_t (*platform_pci_choose_state)(struct pci_dev *dev, pm_message_t state);
-
+/**
+ * pci_update_current_state - Read PCI power state of given device from its
+ * PCI PM registers and cache it
+ * @dev: PCI device to handle.
+ */
+static void pci_update_current_state(struct pci_dev *dev)
+{
+ if (dev->pm_cap) {
+ u16 pmcsr;
+
+ pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
+ dev->current_state = (pmcsr & PCI_PM_CTRL_STATE_MASK);
+ }
+}
+
+/**
+ * pci_set_power_state - Set the power state of a PCI device
+ * @dev: PCI device to handle.
+ * @state: PCI power state (D0, D1, D2, D3hot) to put the device into.
+ *
+ * Transition a device to a new power state, using the platform formware and/or
+ * the device's PCI PM registers.
+ *
+ * RETURN VALUE:
+ * -EINVAL if the requested state is invalid.
+ * -EIO if device does not support PCI PM or its PM capabilities register has a
+ * wrong version, or device doesn't support the requested state.
+ * 0 if device already is in the requested state.
+ * 0 if device's power state has been successfully changed.
+ */
+int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
+{
+ int error;
+
+ /* bound the state we're entering */
+ if (state > PCI_D3hot)
+ state = PCI_D3hot;
+ else if (state < PCI_D0)
+ state = PCI_D0;
+ else if ((state == PCI_D1 || state == PCI_D2) && pci_no_d1d2(dev))
+ /*
+ * If the device or the parent bridge do not support PCI PM,
+ * ignore the request if we're doing anything other than putting
+ * it into D0 (which would only happen on boot).
+ */
+ return 0;
+
+ if (state == PCI_D0 && platform_pci_power_manageable(dev)) {
+ /*
+ * Allow the platform to change the state, for example via ACPI
+ * _PR0, _PS0 and some such, but do not trust it.
+ */
+ int ret = platform_pci_set_power_state(dev, PCI_D0);
+ if (!ret)
+ pci_update_current_state(dev);
+ }
+
+ error = pci_raw_set_power_state(dev, state);
+
+ if (state > PCI_D0 && platform_pci_power_manageable(dev)) {
+ /* Allow the platform to finalize the transition */
+ int ret = platform_pci_set_power_state(dev, state);
+ if (!ret) {
+ pci_update_current_state(dev);
+ error = 0;
+ }
+ }
+
+ return error;
+}
+
/**
* pci_choose_state - Choose the power state of a PCI device
* @dev: PCI device to be suspended
@@ -527,11 +604,9 @@ pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state)
if (!pci_find_capability(dev, PCI_CAP_ID_PM))
return PCI_D0;
- if (platform_pci_choose_state) {
- ret = platform_pci_choose_state(dev, state);
- if (ret != PCI_POWER_ERROR)
- return ret;
- }
+ ret = platform_pci_choose_state(dev);
+ if (ret != PCI_POWER_ERROR)
+ return ret;
switch (state.event) {
case PM_EVENT_ON:
@@ -543,7 +618,8 @@ pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state)
case PM_EVENT_HIBERNATE:
return PCI_D3hot;
default:
- printk("Unrecognized suspend event %d\n", state.event);
+ dev_info(&dev->dev, "unrecognized suspend event %d\n",
+ state.event);
BUG();
}
return PCI_D0;
@@ -568,7 +644,7 @@ static int pci_save_pcie_state(struct pci_dev *dev)
else
found = 1;
if (!save_state) {
- dev_err(&dev->dev, "Out of memory in pci_save_pcie_state\n");
+ dev_err(&dev->dev, "out of memory in pci_save_pcie_state\n");
return -ENOMEM;
}
cap = (u16 *)&save_state->data[0];
@@ -619,7 +695,7 @@ static int pci_save_pcix_state(struct pci_dev *dev)
else
found = 1;
if (!save_state) {
- dev_err(&dev->dev, "Out of memory in pci_save_pcie_state\n");
+ dev_err(&dev->dev, "out of memory in pci_save_pcie_state\n");
return -ENOMEM;
}
cap = (u16 *)&save_state->data[0];
@@ -685,10 +761,9 @@ pci_restore_state(struct pci_dev *dev)
for (i = 15; i >= 0; i--) {
pci_read_config_dword(dev, i * 4, &val);
if (val != dev->saved_config_space[i]) {
- printk(KERN_DEBUG "PM: Writing back config space on "
- "device %s at offset %x (was %x, writing %x)\n",
- pci_name(dev), i,
- val, (int)dev->saved_config_space[i]);
+ dev_printk(KERN_DEBUG, &dev->dev, "restoring config "
+ "space at offset %#x (was %#x, writing %#x)\n",
+ i, val, (int)dev->saved_config_space[i]);
pci_write_config_dword(dev,i * 4,
dev->saved_config_space[i]);
}
@@ -961,6 +1036,46 @@ int pci_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state state)
}
/**
+ * pci_pme_capable - check the capability of PCI device to generate PME#
+ * @dev: PCI device to handle.
+ * @state: PCI state from which device will issue PME#.
+ */
+static bool pci_pme_capable(struct pci_dev *dev, pci_power_t state)
+{
+ if (!dev->pm_cap)
+ return false;
+
+ return !!(dev->pme_support & (1 << state));
+}
+
+/**
+ * pci_pme_active - enable or disable PCI device's PME# function
+ * @dev: PCI device to handle.
+ * @enable: 'true' to enable PME# generation; 'false' to disable it.
+ *
+ * The caller must verify that the device is capable of generating PME# before
+ * calling this function with @enable equal to 'true'.
+ */
+static void pci_pme_active(struct pci_dev *dev, bool enable)
+{
+ u16 pmcsr;
+
+ if (!dev->pm_cap)
+ return;
+
+ pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
+ /* Clear PME_Status by writing 1 to it and enable PME# */
+ pmcsr |= PCI_PM_CTRL_PME_STATUS | PCI_PM_CTRL_PME_ENABLE;
+ if (!enable)
+ pmcsr &= ~PCI_PM_CTRL_PME_ENABLE;
+
+ pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pmcsr);
+
+ dev_printk(KERN_INFO, &dev->dev, "PME# %s\n",
+ enable ? "enabled" : "disabled");
+}
+
+/**
* pci_enable_wake - enable PCI device as wakeup event source
* @dev: PCI device affected
* @state: PCI state from which device will issue wakeup events
@@ -971,66 +1086,173 @@ int pci_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state state)
* called automatically by this routine.
*
* Devices with legacy power management (no standard PCI PM capabilities)
- * always require such platform hooks. Depending on the platform, devices
- * supporting the standard PCI PME# signal may require such platform hooks;
- * they always update bits in config space to allow PME# generation.
+ * always require such platform hooks.
*
- * -EIO is returned if the device can't ever be a wakeup event source.
- * -EINVAL is returned if the device can't generate wakeup events from
- * the specified PCI state. Returns zero if the operation is successful.
+ * RETURN VALUE:
+ * 0 is returned on success
+ * -EINVAL is returned if device is not supposed to wake up the system
+ * Error code depending on the platform is returned if both the platform and
+ * the native mechanism fail to enable the generation of wake-up events
*/
int pci_enable_wake(struct pci_dev *dev, pci_power_t state, int enable)
{
- int pm;
- int status;
- u16 value;
-
- /* Note that drivers should verify device_may_wakeup(&dev->dev)
- * before calling this function. Platform code should report
- * errors when drivers try to enable wakeup on devices that
- * can't issue wakeups, or on which wakeups were disabled by
- * userspace updating the /sys/devices.../power/wakeup file.
+ int error = 0;
+ bool pme_done = false;
+
+ if (!device_may_wakeup(&dev->dev))
+ return -EINVAL;
+
+ /*
+ * According to "PCI System Architecture" 4th ed. by Tom Shanley & Don
+ * Anderson we should be doing PME# wake enable followed by ACPI wake
+ * enable. To disable wake-up we call the platform first, for symmetry.
*/
- status = call_platform_enable_wakeup(&dev->dev, enable);
+ if (!enable && platform_pci_can_wakeup(dev))
+ error = platform_pci_sleep_wake(dev, false);
- /* find PCI PM capability in list */
- pm = pci_find_capability(dev, PCI_CAP_ID_PM);
+ if (!enable || pci_pme_capable(dev, state)) {
+ pci_pme_active(dev, enable);
+ pme_done = true;
+ }
- /* If device doesn't support PM Capabilities, but caller wants to
- * disable wake events, it's a NOP. Otherwise fail unless the
- * platform hooks handled this legacy device already.
- */
- if (!pm)
- return enable ? status : 0;
+ if (enable && platform_pci_can_wakeup(dev))
+ error = platform_pci_sleep_wake(dev, true);
- /* Check device's ability to generate PME# */
- pci_read_config_word(dev,pm+PCI_PM_PMC,&value);
+ return pme_done ? 0 : error;
+}
- value &= PCI_PM_CAP_PME_MASK;
- value >>= ffs(PCI_PM_CAP_PME_MASK) - 1; /* First bit of mask */
+/**
+ * pci_prepare_to_sleep - prepare PCI device for system-wide transition into
+ * a sleep state
+ * @dev: Device to handle.
+ *
+ * Choose the power state appropriate for the device depending on whether
+ * it can wake up the system and/or is power manageable by the platform
+ * (PCI_D3hot is the default) and put the device into that state.
+ */
+int pci_prepare_to_sleep(struct pci_dev *dev)
+{
+ pci_power_t target_state = PCI_D3hot;
+ int error;
- /* Check if it can generate PME# from requested state. */
- if (!value || !(value & (1 << state))) {
- /* if it can't, revert what the platform hook changed,
- * always reporting the base "EINVAL, can't PME#" error
+ if (platform_pci_power_manageable(dev)) {
+ /*
+ * Call the platform to choose the target state of the device
+ * and enable wake-up from this state if supported.
*/
- if (enable)
- call_platform_enable_wakeup(&dev->dev, 0);
- return enable ? -EINVAL : 0;
+ pci_power_t state = platform_pci_choose_state(dev);
+
+ switch (state) {
+ case PCI_POWER_ERROR:
+ case PCI_UNKNOWN:
+ break;
+ case PCI_D1:
+ case PCI_D2:
+ if (pci_no_d1d2(dev))
+ break;
+ default:
+ target_state = state;
+ }
+ } else if (device_may_wakeup(&dev->dev)) {
+ /*
+ * Find the deepest state from which the device can generate
+ * wake-up events, make it the target state and enable device
+ * to generate PME#.
+ */
+ if (!dev->pm_cap)
+ return -EIO;
+
+ if (dev->pme_support) {
+ while (target_state
+ && !(dev->pme_support & (1 << target_state)))
+ target_state--;
+ }
}
- pci_read_config_word(dev, pm + PCI_PM_CTRL, &value);
+ pci_enable_wake(dev, target_state, true);
- /* Clear PME_Status by writing 1 to it and enable PME# */
- value |= PCI_PM_CTRL_PME_STATUS | PCI_PM_CTRL_PME_ENABLE;
+ error = pci_set_power_state(dev, target_state);
- if (!enable)
- value &= ~PCI_PM_CTRL_PME_ENABLE;
+ if (error)
+ pci_enable_wake(dev, target_state, false);
- pci_write_config_word(dev, pm + PCI_PM_CTRL, value);
+ return error;
+}
- return 0;
+/**
+ * pci_back_from_sleep - turn PCI device on during system-wide transition into
+ * the working state a sleep state
+ * @dev: Device to handle.
+ *
+ * Disable device's sytem wake-up capability and put it into D0.
+ */
+int pci_back_from_sleep(struct pci_dev *dev)
+{
+ pci_enable_wake(dev, PCI_D0, false);
+ return pci_set_power_state(dev, PCI_D0);
+}
+
+/**
+ * pci_pm_init - Initialize PM functions of given PCI device
+ * @dev: PCI device to handle.
+ */
+void pci_pm_init(struct pci_dev *dev)
+{
+ int pm;
+ u16 pmc;
+
+ dev->pm_cap = 0;
+
+ /* find PCI PM capability in list */
+ pm = pci_find_capability(dev, PCI_CAP_ID_PM);
+ if (!pm)
+ return;
+ /* Check device's ability to generate PME# */
+ pci_read_config_word(dev, pm + PCI_PM_PMC, &pmc);
+
+ if ((pmc & PCI_PM_CAP_VER_MASK) > 3) {
+ dev_err(&dev->dev, "unsupported PM cap regs version (%u)\n",
+ pmc & PCI_PM_CAP_VER_MASK);
+ return;
+ }
+
+ dev->pm_cap = pm;
+
+ dev->d1_support = false;
+ dev->d2_support = false;
+ if (!pci_no_d1d2(dev)) {
+ if (pmc & PCI_PM_CAP_D1) {
+ dev_printk(KERN_DEBUG, &dev->dev, "supports D1\n");
+ dev->d1_support = true;
+ }
+ if (pmc & PCI_PM_CAP_D2) {
+ dev_printk(KERN_DEBUG, &dev->dev, "supports D2\n");
+ dev->d2_support = true;
+ }
+ }
+
+ pmc &= PCI_PM_CAP_PME_MASK;
+ if (pmc) {
+ dev_printk(KERN_INFO, &dev->dev,
+ "PME# supported from%s%s%s%s%s\n",
+ (pmc & PCI_PM_CAP_PME_D0) ? " D0" : "",
+ (pmc & PCI_PM_CAP_PME_D1) ? " D1" : "",
+ (pmc & PCI_PM_CAP_PME_D2) ? " D2" : "",
+ (pmc & PCI_PM_CAP_PME_D3) ? " D3hot" : "",
+ (pmc & PCI_PM_CAP_PME_D3cold) ? " D3cold" : "");
+ dev->pme_support = pmc >> PCI_PM_CAP_PME_SHIFT;
+ /*
+ * Make device's PM flags reflect the wake-up capability, but
+ * let the user space enable it to wake up the system as needed.
+ */
+ device_set_wakeup_capable(&dev->dev, true);
+ device_set_wakeup_enable(&dev->dev, false);
+ /* Disable the PME# generation functionality */
+ pci_pme_active(dev, false);
+ } else {
+ dev->pme_support = 0;
+ }
}
int
@@ -1116,13 +1338,11 @@ int pci_request_region(struct pci_dev *pdev, int bar, const char *res_name)
return 0;
err_out:
- printk (KERN_WARNING "PCI: Unable to reserve %s region #%d:%llx@%llx "
- "for device %s\n",
- pci_resource_flags(pdev, bar) & IORESOURCE_IO ? "I/O" : "mem",
- bar + 1, /* PCI BAR # */
- (unsigned long long)pci_resource_len(pdev, bar),
- (unsigned long long)pci_resource_start(pdev, bar),
- pci_name(pdev));
+ dev_warn(&pdev->dev, "BAR %d: can't reserve %s region [%#llx-%#llx]\n",
+ bar,
+ pci_resource_flags(pdev, bar) & IORESOURCE_IO ? "I/O" : "mem",
+ (unsigned long long)pci_resource_start(pdev, bar),
+ (unsigned long long)pci_resource_end(pdev, bar));
return -EBUSY;
}
@@ -1214,7 +1434,7 @@ pci_set_master(struct pci_dev *dev)
pci_read_config_word(dev, PCI_COMMAND, &cmd);
if (! (cmd & PCI_COMMAND_MASTER)) {
- pr_debug("PCI: Enabling bus mastering for device %s\n", pci_name(dev));
+ dev_dbg(&dev->dev, "enabling bus mastering\n");
cmd |= PCI_COMMAND_MASTER;
pci_write_config_word(dev, PCI_COMMAND, cmd);
}
@@ -1279,8 +1499,8 @@ pci_set_cacheline_size(struct pci_dev *dev)
if (cacheline_size == pci_cache_line_size)
return 0;
- printk(KERN_DEBUG "PCI: cache line size of %d is not supported "
- "by device %s\n", pci_cache_line_size << 2, pci_name(dev));
+ dev_printk(KERN_DEBUG, &dev->dev, "cache line size of %d is not "
+ "supported\n", pci_cache_line_size << 2);
return -EINVAL;
}
@@ -1305,8 +1525,7 @@ pci_set_mwi(struct pci_dev *dev)
pci_read_config_word(dev, PCI_COMMAND, &cmd);
if (! (cmd & PCI_COMMAND_INVALIDATE)) {
- pr_debug("PCI: Enabling Mem-Wr-Inval for device %s\n",
- pci_name(dev));
+ dev_dbg(&dev->dev, "enabling Mem-Wr-Inval\n");
cmd |= PCI_COMMAND_INVALIDATE;
pci_write_config_word(dev, PCI_COMMAND, cmd);
}
@@ -1702,5 +1921,7 @@ EXPORT_SYMBOL(pci_set_power_state);
EXPORT_SYMBOL(pci_save_state);
EXPORT_SYMBOL(pci_restore_state);
EXPORT_SYMBOL(pci_enable_wake);
+EXPORT_SYMBOL(pci_prepare_to_sleep);
+EXPORT_SYMBOL(pci_back_from_sleep);
EXPORT_SYMBOL_GPL(pci_set_pcie_reset_state);