diff options
Diffstat (limited to 'drivers/phy')
| -rw-r--r-- | drivers/phy/Kconfig | 9 | ||||
| -rw-r--r-- | drivers/phy/Makefile | 1 | ||||
| -rw-r--r-- | drivers/phy/phy-brcmstb-sata.c | 216 | ||||
| -rw-r--r-- | drivers/phy/phy-core.c | 67 | ||||
| -rw-r--r-- | drivers/phy/phy-miphy28lp.c | 9 | ||||
| -rw-r--r-- | drivers/phy/phy-miphy365x.c | 9 | ||||
| -rw-r--r-- | drivers/phy/phy-rcar-gen2.c | 6 | ||||
| -rw-r--r-- | drivers/phy/phy-twl4030-usb.c | 34 |
8 files changed, 303 insertions, 48 deletions
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index fceac96c2a31..56e1b7585d27 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -316,4 +316,13 @@ config PHY_TUSB1210 help Support for TI TUSB1210 USB ULPI PHY. +config PHY_BRCMSTB_SATA + tristate "Broadcom STB SATA PHY driver" + depends on ARCH_BRCMSTB + depends on OF + select GENERIC_PHY + help + Enable this to support the SATA3 PHY on 28nm Broadcom STB SoCs. + Likely useful only with CONFIG_SATA_BRCMSTB enabled. + endmenu diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index 0a2041803135..bc92b427e5ca 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -41,3 +41,4 @@ obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs.o obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-20nm.o obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-14nm.o obj-$(CONFIG_PHY_TUSB1210) += phy-tusb1210.o +obj-$(CONFIG_PHY_BRCMSTB_SATA) += phy-brcmstb-sata.o diff --git a/drivers/phy/phy-brcmstb-sata.c b/drivers/phy/phy-brcmstb-sata.c new file mode 100644 index 000000000000..b7e303d28caf --- /dev/null +++ b/drivers/phy/phy-brcmstb-sata.c @@ -0,0 +1,216 @@ +/* + * Broadcom SATA3 AHCI Controller PHY Driver + * + * Copyright © 2009-2015 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/device.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> + +#define SATA_MDIO_BANK_OFFSET 0x23c +#define SATA_MDIO_REG_OFFSET(ofs) ((ofs) * 4) +#define SATA_MDIO_REG_SPACE_SIZE 0x1000 +#define SATA_MDIO_REG_LENGTH 0x1f00 + +#define MAX_PORTS 2 + +/* Register offset between PHYs in PCB space */ +#define SATA_MDIO_REG_SPACE_SIZE 0x1000 + +struct brcm_sata_port { + int portnum; + struct phy *phy; + struct brcm_sata_phy *phy_priv; + bool ssc_en; +}; + +struct brcm_sata_phy { + struct device *dev; + void __iomem *phy_base; + + struct brcm_sata_port phys[MAX_PORTS]; +}; + +enum sata_mdio_phy_regs_28nm { + PLL_REG_BANK_0 = 0x50, + PLL_REG_BANK_0_PLLCONTROL_0 = 0x81, + + TXPMD_REG_BANK = 0x1a0, + TXPMD_CONTROL1 = 0x81, + TXPMD_CONTROL1_TX_SSC_EN_FRC = BIT(0), + TXPMD_CONTROL1_TX_SSC_EN_FRC_VAL = BIT(1), + TXPMD_TX_FREQ_CTRL_CONTROL1 = 0x82, + TXPMD_TX_FREQ_CTRL_CONTROL2 = 0x83, + TXPMD_TX_FREQ_CTRL_CONTROL2_FMIN_MASK = 0x3ff, + TXPMD_TX_FREQ_CTRL_CONTROL3 = 0x84, + TXPMD_TX_FREQ_CTRL_CONTROL3_FMAX_MASK = 0x3ff, +}; + +static inline void __iomem *brcm_sata_phy_base(struct brcm_sata_port *port) +{ + struct brcm_sata_phy *priv = port->phy_priv; + + return priv->phy_base + (port->portnum * SATA_MDIO_REG_SPACE_SIZE); +} + +static void brcm_sata_mdio_wr(void __iomem *addr, u32 bank, u32 ofs, + u32 msk, u32 value) +{ + u32 tmp; + + writel(bank, addr + SATA_MDIO_BANK_OFFSET); + tmp = readl(addr + SATA_MDIO_REG_OFFSET(ofs)); + tmp = (tmp & msk) | value; + writel(tmp, addr + SATA_MDIO_REG_OFFSET(ofs)); +} + +/* These defaults were characterized by H/W group */ +#define FMIN_VAL_DEFAULT 0x3df +#define FMAX_VAL_DEFAULT 0x3df +#define FMAX_VAL_SSC 0x83 + +static void brcm_sata_cfg_ssc_28nm(struct brcm_sata_port *port) +{ + void __iomem *base = brcm_sata_phy_base(port); + struct brcm_sata_phy *priv = port->phy_priv; + u32 tmp; + + /* override the TX spread spectrum setting */ + tmp = TXPMD_CONTROL1_TX_SSC_EN_FRC_VAL | TXPMD_CONTROL1_TX_SSC_EN_FRC; + brcm_sata_mdio_wr(base, TXPMD_REG_BANK, TXPMD_CONTROL1, ~tmp, tmp); + + /* set fixed min freq */ + brcm_sata_mdio_wr(base, TXPMD_REG_BANK, TXPMD_TX_FREQ_CTRL_CONTROL2, + ~TXPMD_TX_FREQ_CTRL_CONTROL2_FMIN_MASK, + FMIN_VAL_DEFAULT); + + /* set fixed max freq depending on SSC config */ + if (port->ssc_en) { + dev_info(priv->dev, "enabling SSC on port %d\n", port->portnum); + tmp = FMAX_VAL_SSC; + } else { + tmp = FMAX_VAL_DEFAULT; + } + + brcm_sata_mdio_wr(base, TXPMD_REG_BANK, TXPMD_TX_FREQ_CTRL_CONTROL3, + ~TXPMD_TX_FREQ_CTRL_CONTROL3_FMAX_MASK, tmp); +} + +static int brcm_sata_phy_init(struct phy *phy) +{ + struct brcm_sata_port *port = phy_get_drvdata(phy); + + brcm_sata_cfg_ssc_28nm(port); + + return 0; +} + +static struct phy_ops phy_ops_28nm = { + .init = brcm_sata_phy_init, + .owner = THIS_MODULE, +}; + +static const struct of_device_id brcm_sata_phy_of_match[] = { + { .compatible = "brcm,bcm7445-sata-phy" }, + {}, +}; +MODULE_DEVICE_TABLE(of, brcm_sata_phy_of_match); + +static int brcm_sata_phy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *dn = dev->of_node, *child; + struct brcm_sata_phy *priv; + struct resource *res; + struct phy_provider *provider; + int count = 0; + + if (of_get_child_count(dn) == 0) + return -ENODEV; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + dev_set_drvdata(dev, priv); + priv->dev = dev; + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy"); + priv->phy_base = devm_ioremap_resource(dev, res); + if (IS_ERR(priv->phy_base)) + return PTR_ERR(priv->phy_base); + + for_each_available_child_of_node(dn, child) { + unsigned int id; + struct brcm_sata_port *port; + + if (of_property_read_u32(child, "reg", &id)) { + dev_err(dev, "missing reg property in node %s\n", + child->name); + return -EINVAL; + } + + if (id >= MAX_PORTS) { + dev_err(dev, "invalid reg: %u\n", id); + return -EINVAL; + } + if (priv->phys[id].phy) { + dev_err(dev, "already registered port %u\n", id); + return -EINVAL; + } + + port = &priv->phys[id]; + port->portnum = id; + port->phy_priv = priv; + port->phy = devm_phy_create(dev, child, &phy_ops_28nm); + port->ssc_en = of_property_read_bool(child, "brcm,enable-ssc"); + if (IS_ERR(port->phy)) { + dev_err(dev, "failed to create PHY\n"); + return PTR_ERR(port->phy); + } + + phy_set_drvdata(port->phy, port); + count++; + } + + provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + if (IS_ERR(provider)) { + dev_err(dev, "could not register PHY provider\n"); + return PTR_ERR(provider); + } + + dev_info(dev, "registered %d port(s)\n", count); + + return 0; +} + +static struct platform_driver brcm_sata_phy_driver = { + .probe = brcm_sata_phy_probe, + .driver = { + .of_match_table = brcm_sata_phy_of_match, + .name = "brcmstb-sata-phy", + } +}; +module_platform_driver(brcm_sata_phy_driver); + +MODULE_DESCRIPTION("Broadcom STB SATA PHY driver"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Marc Carino"); +MODULE_AUTHOR("Brian Norris"); +MODULE_ALIAS("platform:phy-brcmstb-sata"); diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c index 3791838f4bd4..7d535dbb63ee 100644 --- a/drivers/phy/phy-core.c +++ b/drivers/phy/phy-core.c @@ -367,13 +367,21 @@ static struct phy *_of_phy_get(struct device_node *np, int index) phy_provider = of_phy_provider_lookup(args.np); if (IS_ERR(phy_provider) || !try_module_get(phy_provider->owner)) { phy = ERR_PTR(-EPROBE_DEFER); - goto err0; + goto out_unlock; + } + + if (!of_device_is_available(args.np)) { + dev_warn(phy_provider->dev, "Requested PHY is disabled\n"); + phy = ERR_PTR(-ENODEV); + goto out_put_module; } phy = phy_provider->of_xlate(phy_provider->dev, &args); + +out_put_module: module_put(phy_provider->owner); -err0: +out_unlock: mutex_unlock(&phy_provider_mutex); of_node_put(args.np); @@ -623,6 +631,38 @@ struct phy *devm_of_phy_get(struct device *dev, struct device_node *np, EXPORT_SYMBOL_GPL(devm_of_phy_get); /** + * devm_of_phy_get_by_index() - lookup and obtain a reference to a phy by index. + * @dev: device that requests this phy + * @np: node containing the phy + * @index: index of the phy + * + * Gets the phy using _of_phy_get(), and associates a device with it using + * devres. On driver detach, release function is invoked on the devres data, + * then, devres data is freed. + * + */ +struct phy *devm_of_phy_get_by_index(struct device *dev, struct device_node *np, + int index) +{ + struct phy **ptr, *phy; + + ptr = devres_alloc(devm_phy_release, sizeof(*ptr), GFP_KERNEL); + if (!ptr) + return ERR_PTR(-ENOMEM); + + phy = _of_phy_get(np, index); + if (!IS_ERR(phy)) { + *ptr = phy; + devres_add(dev, ptr); + } else { + devres_free(ptr); + } + + return phy; +} +EXPORT_SYMBOL_GPL(devm_of_phy_get_by_index); + +/** * phy_create() - create a new phy * @dev: device that is creating the new phy * @node: device node of the phy @@ -651,16 +691,6 @@ struct phy *phy_create(struct device *dev, struct device_node *node, goto free_phy; } - /* phy-supply */ - phy->pwr = regulator_get_optional(dev, "phy"); - if (IS_ERR(phy->pwr)) { - if (PTR_ERR(phy->pwr) == -EPROBE_DEFER) { - ret = -EPROBE_DEFER; - goto free_ida; - } - phy->pwr = NULL; - } - device_initialize(&phy->dev); mutex_init(&phy->mutex); @@ -674,6 +704,16 @@ struct phy *phy_create(struct device *dev, struct device_node *node, if (ret) goto put_dev; + /* phy-supply */ + phy->pwr = regulator_get_optional(&phy->dev, "phy"); + if (IS_ERR(phy->pwr)) { + ret = PTR_ERR(phy->pwr); + if (ret == -EPROBE_DEFER) + goto put_dev; + + phy->pwr = NULL; + } + ret = device_add(&phy->dev); if (ret) goto put_dev; @@ -689,9 +729,6 @@ put_dev: put_device(&phy->dev); /* calls phy_release() which frees resources */ return ERR_PTR(ret); -free_ida: - ida_simple_remove(&phy_ida, phy->id); - free_phy: kfree(phy); return ERR_PTR(ret); diff --git a/drivers/phy/phy-miphy28lp.c b/drivers/phy/phy-miphy28lp.c index c4cc11dcb2a2..5e257ef7ac05 100644 --- a/drivers/phy/phy-miphy28lp.c +++ b/drivers/phy/phy-miphy28lp.c @@ -367,7 +367,7 @@ static struct miphy28lp_pll_gen pcie_pll_gen[] = { static inline void miphy28lp_set_reset(struct miphy28lp_phy *miphy_phy) { - void *base = miphy_phy->base; + void __iomem *base = miphy_phy->base; u8 val; /* Putting Macro in reset */ @@ -391,7 +391,7 @@ static inline void miphy28lp_set_reset(struct miphy28lp_phy *miphy_phy) static inline void miphy28lp_pll_calibration(struct miphy28lp_phy *miphy_phy, struct pll_ratio *pll_ratio) { - void *base = miphy_phy->base; + void __iomem *base = miphy_phy->base; u8 val; /* Applying PLL Settings */ @@ -1107,11 +1107,6 @@ static struct phy *miphy28lp_xlate(struct device *dev, struct device_node *phynode = args->np; int ret, index = 0; - if (!of_device_is_available(phynode)) { - dev_warn(dev, "Requested PHY is disabled\n"); - return ERR_PTR(-ENODEV); - } - if (args->args_count != 1) { dev_err(dev, "Invalid number of cells in 'phy' property\n"); return ERR_PTR(-EINVAL); diff --git a/drivers/phy/phy-miphy365x.c b/drivers/phy/phy-miphy365x.c index 019c2d75344e..0ff354d6e183 100644 --- a/drivers/phy/phy-miphy365x.c +++ b/drivers/phy/phy-miphy365x.c @@ -441,8 +441,8 @@ static int miphy365x_init(struct phy *phy) return ret; } -int miphy365x_get_addr(struct device *dev, struct miphy365x_phy *miphy_phy, - int index) +static int miphy365x_get_addr(struct device *dev, + struct miphy365x_phy *miphy_phy, int index) { struct device_node *phynode = miphy_phy->phy->dev.of_node; const char *name; @@ -476,11 +476,6 @@ static struct phy *miphy365x_xlate(struct device *dev, struct device_node *phynode = args->np; int ret, index; - if (!of_device_is_available(phynode)) { - dev_warn(dev, "Requested PHY is disabled\n"); - return ERR_PTR(-ENODEV); - } - if (args->args_count != 1) { dev_err(dev, "Invalid number of cells in 'phy' property\n"); return ERR_PTR(-EINVAL); diff --git a/drivers/phy/phy-rcar-gen2.c b/drivers/phy/phy-rcar-gen2.c index 778276aba3aa..0050301dce7a 100644 --- a/drivers/phy/phy-rcar-gen2.c +++ b/drivers/phy/phy-rcar-gen2.c @@ -195,6 +195,7 @@ static struct phy_ops rcar_gen2_phy_ops = { static const struct of_device_id rcar_gen2_phy_match_table[] = { { .compatible = "renesas,usb-phy-r8a7790" }, { .compatible = "renesas,usb-phy-r8a7791" }, + { .compatible = "renesas,usb-phy-r8a7794" }, { } }; MODULE_DEVICE_TABLE(of, rcar_gen2_phy_match_table); @@ -206,11 +207,6 @@ static struct phy *rcar_gen2_phy_xlate(struct device *dev, struct device_node *np = args->np; int i; - if (!of_device_is_available(np)) { - dev_warn(dev, "Requested PHY is disabled\n"); - return ERR_PTR(-ENODEV); - } - drv = dev_get_drvdata(dev); if (!drv) return ERR_PTR(-EINVAL); diff --git a/drivers/phy/phy-twl4030-usb.c b/drivers/phy/phy-twl4030-usb.c index bc42d6a8939f..3a707dd14238 100644 --- a/drivers/phy/phy-twl4030-usb.c +++ b/drivers/phy/phy-twl4030-usb.c @@ -144,6 +144,16 @@ #define PMBR1 0x0D #define GPIO_USB_4PIN_ULPI_2430C (3 << 0) +/* + * If VBUS is valid or ID is ground, then we know a + * cable is present and we need to be runtime-enabled + */ +static inline bool cable_present(enum omap_musb_vbus_id_status stat) +{ + return stat == OMAP_MUSB_VBUS_VALID || + stat == OMAP_MUSB_ID_GROUND; +} + struct twl4030_usb { struct usb_phy phy; struct device *dev; @@ -386,8 +396,6 @@ static int twl4030_usb_runtime_suspend(struct device *dev) struct twl4030_usb *twl = dev_get_drvdata(dev); dev_dbg(twl->dev, "%s\n", __func__); - if (pm_runtime_suspended(dev)) - return 0; __twl4030_phy_power(twl, 0); regulator_disable(twl->usb1v5); @@ -403,8 +411,6 @@ static int twl4030_usb_runtime_resume(struct device *dev) int res; dev_dbg(twl->dev, "%s\n", __func__); - if (pm_runtime_active(dev)) - return 0; res = regulator_enable(twl->usb3v1); if (res) @@ -536,8 +542,10 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl) mutex_lock(&twl->lock); if (status >= 0 && status != twl->linkstat) { + status_changed = + cable_present(twl->linkstat) != + cable_present(status); twl->linkstat = status; - status_changed = true; } mutex_unlock(&twl->lock); @@ -553,15 +561,11 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl) * USB_LINK_VBUS state. musb_hdrc won't care until it * starts to handle softconnect right. */ - if ((status == OMAP_MUSB_VBUS_VALID) || - (status == OMAP_MUSB_ID_GROUND)) { - if (pm_runtime_suspended(twl->dev)) - pm_runtime_get_sync(twl->dev); + if (cable_present(status)) { + pm_runtime_get_sync(twl->dev); } else { - if (pm_runtime_active(twl->dev)) { - pm_runtime_mark_last_busy(twl->dev); - pm_runtime_put_autosuspend(twl->dev); - } + pm_runtime_mark_last_busy(twl->dev); + pm_runtime_put_autosuspend(twl->dev); } omap_musb_mailbox(status); } @@ -711,7 +715,6 @@ static int twl4030_usb_probe(struct platform_device *pdev) pm_runtime_use_autosuspend(&pdev->dev); pm_runtime_set_autosuspend_delay(&pdev->dev, 2000); pm_runtime_enable(&pdev->dev); - pm_runtime_get_sync(&pdev->dev); /* Our job is to use irqs and status from the power module * to keep the transceiver disabled when nothing's connected. @@ -767,6 +770,9 @@ static int twl4030_usb_remove(struct platform_device *pdev) /* disable complete OTG block */ twl4030_usb_clear_bits(twl, POWER_CTRL, POWER_CTRL_OTG_ENAB); + + if (cable_present(twl->linkstat)) + pm_runtime_put_noidle(twl->dev); pm_runtime_mark_last_busy(twl->dev); pm_runtime_put(twl->dev); |