diff options
Diffstat (limited to 'drivers/rapidio')
| -rw-r--r-- | drivers/rapidio/Kconfig | 20 | ||||
| -rw-r--r-- | drivers/rapidio/Makefile | 3 | ||||
| -rw-r--r-- | drivers/rapidio/devices/tsi721.c | 12 | ||||
| -rw-r--r-- | drivers/rapidio/rio-driver.c | 8 | ||||
| -rw-r--r-- | drivers/rapidio/rio-scan.c | 190 | ||||
| -rw-r--r-- | drivers/rapidio/rio-sysfs.c | 45 | ||||
| -rw-r--r-- | drivers/rapidio/rio.c | 246 | ||||
| -rw-r--r-- | drivers/rapidio/rio.h | 13 |
8 files changed, 396 insertions, 141 deletions
diff --git a/drivers/rapidio/Kconfig b/drivers/rapidio/Kconfig index 6194d35ebb97..5ab056494bbe 100644 --- a/drivers/rapidio/Kconfig +++ b/drivers/rapidio/Kconfig @@ -47,4 +47,24 @@ config RAPIDIO_DEBUG If you are unsure about this, say N here. +choice + prompt "Enumeration method" + depends on RAPIDIO + default RAPIDIO_ENUM_BASIC + help + There are different enumeration and discovery mechanisms offered + for RapidIO subsystem. You may select single built-in method or + or any number of methods to be built as modules. + Selecting a built-in method disables use of loadable methods. + + If unsure, select Basic built-in. + +config RAPIDIO_ENUM_BASIC + tristate "Basic" + help + This option includes basic RapidIO fabric enumeration and discovery + mechanism similar to one described in RapidIO specification Annex 1. + +endchoice + source "drivers/rapidio/switches/Kconfig" diff --git a/drivers/rapidio/Makefile b/drivers/rapidio/Makefile index ec3fb8121004..3036702ffe8b 100644 --- a/drivers/rapidio/Makefile +++ b/drivers/rapidio/Makefile @@ -1,7 +1,8 @@ # # Makefile for RapidIO interconnect services # -obj-y += rio.o rio-access.o rio-driver.o rio-scan.o rio-sysfs.o +obj-y += rio.o rio-access.o rio-driver.o rio-sysfs.o +obj-$(CONFIG_RAPIDIO_ENUM_BASIC) += rio-scan.o obj-$(CONFIG_RAPIDIO) += switches/ obj-$(CONFIG_RAPIDIO) += devices/ diff --git a/drivers/rapidio/devices/tsi721.c b/drivers/rapidio/devices/tsi721.c index 6faba406b6e9..a8b2c23a7ef4 100644 --- a/drivers/rapidio/devices/tsi721.c +++ b/drivers/rapidio/devices/tsi721.c @@ -471,6 +471,10 @@ static irqreturn_t tsi721_irqhandler(int irq, void *ptr) u32 intval; u32 ch_inte; + /* For MSI mode disable all device-level interrupts */ + if (priv->flags & TSI721_USING_MSI) + iowrite32(0, priv->regs + TSI721_DEV_INTE); + dev_int = ioread32(priv->regs + TSI721_DEV_INT); if (!dev_int) return IRQ_NONE; @@ -560,6 +564,14 @@ static irqreturn_t tsi721_irqhandler(int irq, void *ptr) } } #endif + + /* For MSI mode re-enable device-level interrupts */ + if (priv->flags & TSI721_USING_MSI) { + dev_int = TSI721_DEV_INT_SR2PC_CH | TSI721_DEV_INT_SRIO | + TSI721_DEV_INT_SMSG_CH | TSI721_DEV_INT_BDMA_CH; + iowrite32(dev_int, priv->regs + TSI721_DEV_INTE); + } + return IRQ_HANDLED; } diff --git a/drivers/rapidio/rio-driver.c b/drivers/rapidio/rio-driver.c index 0f4a53bdaa3c..a0c875563d76 100644 --- a/drivers/rapidio/rio-driver.c +++ b/drivers/rapidio/rio-driver.c @@ -164,6 +164,13 @@ void rio_unregister_driver(struct rio_driver *rdrv) driver_unregister(&rdrv->driver); } +void rio_attach_device(struct rio_dev *rdev) +{ + rdev->dev.bus = &rio_bus_type; + rdev->dev.parent = &rio_bus; +} +EXPORT_SYMBOL_GPL(rio_attach_device); + /** * rio_match_bus - Tell if a RIO device structure has a matching RIO driver device id structure * @dev: the standard device structure to match against @@ -200,6 +207,7 @@ struct bus_type rio_bus_type = { .name = "rapidio", .match = rio_match_bus, .dev_attrs = rio_dev_attrs, + .bus_attrs = rio_bus_attrs, .probe = rio_device_probe, .remove = rio_device_remove, }; diff --git a/drivers/rapidio/rio-scan.c b/drivers/rapidio/rio-scan.c index a965acd3c0e4..4c15dbf81087 100644 --- a/drivers/rapidio/rio-scan.c +++ b/drivers/rapidio/rio-scan.c @@ -37,12 +37,8 @@ #include "rio.h" -LIST_HEAD(rio_devices); - static void rio_init_em(struct rio_dev *rdev); -DEFINE_SPINLOCK(rio_global_list_lock); - static int next_destid = 0; static int next_comptag = 1; @@ -327,127 +323,6 @@ static int rio_is_switch(struct rio_dev *rdev) } /** - * rio_switch_init - Sets switch operations for a particular vendor switch - * @rdev: RIO device - * @do_enum: Enumeration/Discovery mode flag - * - * Searches the RIO switch ops table for known switch types. If the vid - * and did match a switch table entry, then call switch initialization - * routine to setup switch-specific routines. - */ -static void rio_switch_init(struct rio_dev *rdev, int do_enum) -{ - struct rio_switch_ops *cur = __start_rio_switch_ops; - struct rio_switch_ops *end = __end_rio_switch_ops; - - while (cur < end) { - if ((cur->vid == rdev->vid) && (cur->did == rdev->did)) { - pr_debug("RIO: calling init routine for %s\n", - rio_name(rdev)); - cur->init_hook(rdev, do_enum); - break; - } - cur++; - } - - if ((cur >= end) && (rdev->pef & RIO_PEF_STD_RT)) { - pr_debug("RIO: adding STD routing ops for %s\n", - rio_name(rdev)); - rdev->rswitch->add_entry = rio_std_route_add_entry; - rdev->rswitch->get_entry = rio_std_route_get_entry; - rdev->rswitch->clr_table = rio_std_route_clr_table; - } - - if (!rdev->rswitch->add_entry || !rdev->rswitch->get_entry) - printk(KERN_ERR "RIO: missing routing ops for %s\n", - rio_name(rdev)); -} - -/** - * rio_add_device- Adds a RIO device to the device model - * @rdev: RIO device - * - * Adds the RIO device to the global device list and adds the RIO - * device to the RIO device list. Creates the generic sysfs nodes - * for an RIO device. - */ -static int rio_add_device(struct rio_dev *rdev) -{ - int err; - - err = device_add(&rdev->dev); - if (err) - return err; - - spin_lock(&rio_global_list_lock); - list_add_tail(&rdev->global_list, &rio_devices); - spin_unlock(&rio_global_list_lock); - - rio_create_sysfs_dev_files(rdev); - - return 0; -} - -/** - * rio_enable_rx_tx_port - enable input receiver and output transmitter of - * given port - * @port: Master port associated with the RIO network - * @local: local=1 select local port otherwise a far device is reached - * @destid: Destination ID of the device to check host bit - * @hopcount: Number of hops to reach the target - * @port_num: Port (-number on switch) to enable on a far end device - * - * Returns 0 or 1 from on General Control Command and Status Register - * (EXT_PTR+0x3C) - */ -inline int rio_enable_rx_tx_port(struct rio_mport *port, - int local, u16 destid, - u8 hopcount, u8 port_num) { -#ifdef CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS - u32 regval; - u32 ext_ftr_ptr; - - /* - * enable rx input tx output port - */ - pr_debug("rio_enable_rx_tx_port(local = %d, destid = %d, hopcount = " - "%d, port_num = %d)\n", local, destid, hopcount, port_num); - - ext_ftr_ptr = rio_mport_get_physefb(port, local, destid, hopcount); - - if (local) { - rio_local_read_config_32(port, ext_ftr_ptr + - RIO_PORT_N_CTL_CSR(0), - ®val); - } else { - if (rio_mport_read_config_32(port, destid, hopcount, - ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num), ®val) < 0) - return -EIO; - } - - if (regval & RIO_PORT_N_CTL_P_TYP_SER) { - /* serial */ - regval = regval | RIO_PORT_N_CTL_EN_RX_SER - | RIO_PORT_N_CTL_EN_TX_SER; - } else { - /* parallel */ - regval = regval | RIO_PORT_N_CTL_EN_RX_PAR - | RIO_PORT_N_CTL_EN_TX_PAR; - } - - if (local) { - rio_local_write_config_32(port, ext_ftr_ptr + - RIO_PORT_N_CTL_CSR(0), regval); - } else { - if (rio_mport_write_config_32(port, destid, hopcount, - ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num), regval) < 0) - return -EIO; - } -#endif - return 0; -} - -/** * rio_setup_device- Allocates and sets up a RIO device * @net: RIO network * @port: Master port to send transactions @@ -587,8 +462,7 @@ static struct rio_dev *rio_setup_device(struct rio_net *net, rdev->destid); } - rdev->dev.bus = &rio_bus_type; - rdev->dev.parent = &rio_bus; + rio_attach_device(rdev); device_initialize(&rdev->dev); rdev->dev.release = rio_release_dev; @@ -1260,19 +1134,30 @@ static void rio_pw_enable(struct rio_mport *port, int enable) /** * rio_enum_mport- Start enumeration through a master port * @mport: Master port to send transactions + * @flags: Enumeration control flags * * Starts the enumeration process. If somebody has enumerated our * master port device, then give up. If not and we have an active * link, then start recursive peer enumeration. Returns %0 if * enumeration succeeds or %-EBUSY if enumeration fails. */ -int rio_enum_mport(struct rio_mport *mport) +int rio_enum_mport(struct rio_mport *mport, u32 flags) { struct rio_net *net = NULL; int rc = 0; printk(KERN_INFO "RIO: enumerate master port %d, %s\n", mport->id, mport->name); + + /* + * To avoid multiple start requests (repeat enumeration is not supported + * by this method) check if enumeration/discovery was performed for this + * mport: if mport was added into the list of mports for a net exit + * with error. + */ + if (mport->nnode.next || mport->nnode.prev) + return -EBUSY; + /* If somebody else enumerated our master port device, bail. */ if (rio_enum_host(mport) < 0) { printk(KERN_INFO @@ -1362,14 +1247,16 @@ static void rio_build_route_tables(struct rio_net *net) /** * rio_disc_mport- Start discovery through a master port * @mport: Master port to send transactions + * @flags: discovery control flags * * Starts the discovery process. If we have an active link, - * then wait for the signal that enumeration is complete. + * then wait for the signal that enumeration is complete (if wait + * is allowed). * When enumeration completion is signaled, start recursive * peer discovery. Returns %0 if discovery succeeds or %-EBUSY * on failure. */ -int rio_disc_mport(struct rio_mport *mport) +int rio_disc_mport(struct rio_mport *mport, u32 flags) { struct rio_net *net = NULL; unsigned long to_end; @@ -1379,6 +1266,11 @@ int rio_disc_mport(struct rio_mport *mport) /* If master port has an active link, allocate net and discover peers */ if (rio_mport_is_active(mport)) { + if (rio_enum_complete(mport)) + goto enum_done; + else if (flags & RIO_SCAN_ENUM_NO_WAIT) + return -EAGAIN; + pr_debug("RIO: wait for enumeration to complete...\n"); to_end = jiffies + CONFIG_RAPIDIO_DISC_TIMEOUT * HZ; @@ -1421,3 +1313,41 @@ enum_done: bail: return -EBUSY; } + +static struct rio_scan rio_scan_ops = { + .enumerate = rio_enum_mport, + .discover = rio_disc_mport, +}; + +static bool scan; +module_param(scan, bool, 0); +MODULE_PARM_DESC(scan, "Start RapidIO network enumeration/discovery " + "(default = 0)"); + +/** + * rio_basic_attach: + * + * When this enumeration/discovery method is loaded as a module this function + * registers its specific enumeration and discover routines for all available + * RapidIO mport devices. The "scan" command line parameter controls ability of + * the module to start RapidIO enumeration/discovery automatically. + * + * Returns 0 for success or -EIO if unable to register itself. + * + * This enumeration/discovery method cannot be unloaded and therefore does not + * provide a matching cleanup_module routine. + */ + +static int __init rio_basic_attach(void) +{ + if (rio_register_scan(RIO_MPORT_ANY, &rio_scan_ops)) + return -EIO; + if (scan) + rio_init_mports(); + return 0; +} + +late_initcall(rio_basic_attach); + +MODULE_DESCRIPTION("Basic RapidIO enumeration/discovery"); +MODULE_LICENSE("GPL"); diff --git a/drivers/rapidio/rio-sysfs.c b/drivers/rapidio/rio-sysfs.c index 4dbe360989be..66d4acd5e18f 100644 --- a/drivers/rapidio/rio-sysfs.c +++ b/drivers/rapidio/rio-sysfs.c @@ -285,3 +285,48 @@ void rio_remove_sysfs_dev_files(struct rio_dev *rdev) rdev->rswitch->sw_sysfs(rdev, RIO_SW_SYSFS_REMOVE); } } + +static ssize_t bus_scan_store(struct bus_type *bus, const char *buf, + size_t count) +{ + long val; + struct rio_mport *port = NULL; + int rc; + + if (kstrtol(buf, 0, &val) < 0) + return -EINVAL; + + if (val == RIO_MPORT_ANY) { + rc = rio_init_mports(); + goto exit; + } + + if (val < 0 || val >= RIO_MAX_MPORTS) + return -EINVAL; + + port = rio_find_mport((int)val); + + if (!port) { + pr_debug("RIO: %s: mport_%d not available\n", + __func__, (int)val); + return -EINVAL; + } + + if (!port->nscan) + return -EINVAL; + + if (port->host_deviceid >= 0) + rc = port->nscan->enumerate(port, 0); + else + rc = port->nscan->discover(port, RIO_SCAN_ENUM_NO_WAIT); +exit: + if (!rc) + rc = count; + + return rc; +} + +struct bus_attribute rio_bus_attrs[] = { + __ATTR(scan, (S_IWUSR|S_IWGRP), NULL, bus_scan_store), + __ATTR_NULL +}; diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c index d553b5d13722..cb1c08996fbb 100644 --- a/drivers/rapidio/rio.c +++ b/drivers/rapidio/rio.c @@ -31,7 +31,11 @@ #include "rio.h" +static LIST_HEAD(rio_devices); +static DEFINE_SPINLOCK(rio_global_list_lock); + static LIST_HEAD(rio_mports); +static DEFINE_MUTEX(rio_mport_list_lock); static unsigned char next_portid; static DEFINE_SPINLOCK(rio_mmap_lock); @@ -53,6 +57,32 @@ u16 rio_local_get_device_id(struct rio_mport *port) } /** + * rio_add_device- Adds a RIO device to the device model + * @rdev: RIO device + * + * Adds the RIO device to the global device list and adds the RIO + * device to the RIO device list. Creates the generic sysfs nodes + * for an RIO device. + */ +int rio_add_device(struct rio_dev *rdev) +{ + int err; + + err = device_add(&rdev->dev); + if (err) + return err; + + spin_lock(&rio_global_list_lock); + list_add_tail(&rdev->global_list, &rio_devices); + spin_unlock(&rio_global_list_lock); + + rio_create_sysfs_dev_files(rdev); + + return 0; +} +EXPORT_SYMBOL_GPL(rio_add_device); + +/** * rio_request_inb_mbox - request inbound mailbox service * @mport: RIO master port from which to allocate the mailbox resource * @dev_id: Device specific pointer to pass on event @@ -489,6 +519,7 @@ rio_mport_get_physefb(struct rio_mport *port, int local, return ext_ftr_ptr; } +EXPORT_SYMBOL_GPL(rio_mport_get_physefb); /** * rio_get_comptag - Begin or continue searching for a RIO device by component tag @@ -521,6 +552,7 @@ exit: spin_unlock(&rio_global_list_lock); return rdev; } +EXPORT_SYMBOL_GPL(rio_get_comptag); /** * rio_set_port_lockout - Sets/clears LOCKOUT bit (RIO EM 1.3) for a switch port. @@ -545,6 +577,107 @@ int rio_set_port_lockout(struct rio_dev *rdev, u32 pnum, int lock) regval); return 0; } +EXPORT_SYMBOL_GPL(rio_set_port_lockout); + +/** + * rio_switch_init - Sets switch operations for a particular vendor switch + * @rdev: RIO device + * @do_enum: Enumeration/Discovery mode flag + * + * Searches the RIO switch ops table for known switch types. If the vid + * and did match a switch table entry, then call switch initialization + * routine to setup switch-specific routines. + */ +void rio_switch_init(struct rio_dev *rdev, int do_enum) +{ + struct rio_switch_ops *cur = __start_rio_switch_ops; + struct rio_switch_ops *end = __end_rio_switch_ops; + + while (cur < end) { + if ((cur->vid == rdev->vid) && (cur->did == rdev->did)) { + pr_debug("RIO: calling init routine for %s\n", + rio_name(rdev)); + cur->init_hook(rdev, do_enum); + break; + } + cur++; + } + + if ((cur >= end) && (rdev->pef & RIO_PEF_STD_RT)) { + pr_debug("RIO: adding STD routing ops for %s\n", + rio_name(rdev)); + rdev->rswitch->add_entry = rio_std_route_add_entry; + rdev->rswitch->get_entry = rio_std_route_get_entry; + rdev->rswitch->clr_table = rio_std_route_clr_table; + } + + if (!rdev->rswitch->add_entry || !rdev->rswitch->get_entry) + printk(KERN_ERR "RIO: missing routing ops for %s\n", + rio_name(rdev)); +} +EXPORT_SYMBOL_GPL(rio_switch_init); + +/** + * rio_enable_rx_tx_port - enable input receiver and output transmitter of + * given port + * @port: Master port associated with the RIO network + * @local: local=1 select local port otherwise a far device is reached + * @destid: Destination ID of the device to check host bit + * @hopcount: Number of hops to reach the target + * @port_num: Port (-number on switch) to enable on a far end device + * + * Returns 0 or 1 from on General Control Command and Status Register + * (EXT_PTR+0x3C) + */ +int rio_enable_rx_tx_port(struct rio_mport *port, + int local, u16 destid, + u8 hopcount, u8 port_num) +{ +#ifdef CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS + u32 regval; + u32 ext_ftr_ptr; + + /* + * enable rx input tx output port + */ + pr_debug("rio_enable_rx_tx_port(local = %d, destid = %d, hopcount = " + "%d, port_num = %d)\n", local, destid, hopcount, port_num); + + ext_ftr_ptr = rio_mport_get_physefb(port, local, destid, hopcount); + + if (local) { + rio_local_read_config_32(port, ext_ftr_ptr + + RIO_PORT_N_CTL_CSR(0), + ®val); + } else { + if (rio_mport_read_config_32(port, destid, hopcount, + ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num), ®val) < 0) + return -EIO; + } + + if (regval & RIO_PORT_N_CTL_P_TYP_SER) { + /* serial */ + regval = regval | RIO_PORT_N_CTL_EN_RX_SER + | RIO_PORT_N_CTL_EN_TX_SER; + } else { + /* parallel */ + regval = regval | RIO_PORT_N_CTL_EN_RX_PAR + | RIO_PORT_N_CTL_EN_TX_PAR; + } + + if (local) { + rio_local_write_config_32(port, ext_ftr_ptr + + RIO_PORT_N_CTL_CSR(0), regval); + } else { + if (rio_mport_write_config_32(port, destid, hopcount, + ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num), regval) < 0) + return -EIO; + } +#endif + return 0; +} +EXPORT_SYMBOL_GPL(rio_enable_rx_tx_port); + /** * rio_chk_dev_route - Validate route to the specified device. @@ -610,6 +743,7 @@ rio_mport_chk_dev_access(struct rio_mport *mport, u16 destid, u8 hopcount) return 0; } +EXPORT_SYMBOL_GPL(rio_mport_chk_dev_access); /** * rio_chk_dev_access - Validate access to the specified device. @@ -941,6 +1075,7 @@ rio_mport_get_efb(struct rio_mport *port, int local, u16 destid, return RIO_GET_BLOCK_ID(reg_val); } } +EXPORT_SYMBOL_GPL(rio_mport_get_efb); /** * rio_mport_get_feature - query for devices' extended features @@ -997,6 +1132,7 @@ rio_mport_get_feature(struct rio_mport * port, int local, u16 destid, return 0; } +EXPORT_SYMBOL_GPL(rio_mport_get_feature); /** * rio_get_asm - Begin or continue searching for a RIO device by vid/did/asm_vid/asm_did @@ -1246,6 +1382,95 @@ EXPORT_SYMBOL_GPL(rio_dma_prep_slave_sg); #endif /* CONFIG_RAPIDIO_DMA_ENGINE */ +/** + * rio_find_mport - find RIO mport by its ID + * @mport_id: number (ID) of mport device + * + * Given a RIO mport number, the desired mport is located + * in the global list of mports. If the mport is found, a pointer to its + * data structure is returned. If no mport is found, %NULL is returned. + */ +struct rio_mport *rio_find_mport(int mport_id) +{ + struct rio_mport *port; + + mutex_lock(&rio_mport_list_lock); + list_for_each_entry(port, &rio_mports, node) { + if (port->id == mport_id) + goto found; + } + port = NULL; +found: + mutex_unlock(&rio_mport_list_lock); + + return port; +} + +/** + * rio_register_scan - enumeration/discovery method registration interface + * @mport_id: mport device ID for which fabric scan routine has to be set + * (RIO_MPORT_ANY = set for all available mports) + * @scan_ops: enumeration/discovery control structure + * + * Assigns enumeration or discovery method to the specified mport device (or all + * available mports if RIO_MPORT_ANY is specified). + * Returns error if the mport already has an enumerator attached to it. + * In case of RIO_MPORT_ANY ignores ports with valid scan routines and returns + * an error if was unable to find at least one available mport. + */ +int rio_register_scan(int mport_id, struct rio_scan *scan_ops) +{ + struct rio_mport *port; + int rc = -EBUSY; + + mutex_lock(&rio_mport_list_lock); + list_for_each_entry(port, &rio_mports, node) { + if (port->id == mport_id || mport_id == RIO_MPORT_ANY) { + if (port->nscan && mport_id == RIO_MPORT_ANY) + continue; + else if (port->nscan) + break; + + port->nscan = scan_ops; + rc = 0; + + if (mport_id != RIO_MPORT_ANY) + break; + } + } + mutex_unlock(&rio_mport_list_lock); + + return rc; +} +EXPORT_SYMBOL_GPL(rio_register_scan); + +/** + * rio_unregister_scan - removes enumeration/discovery method from mport + * @mport_id: mport device ID for which fabric scan routine has to be + * unregistered (RIO_MPORT_ANY = set for all available mports) + * + * Removes enumeration or discovery method assigned to the specified mport + * device (or all available mports if RIO_MPORT_ANY is specified). + */ +int rio_unregister_scan(int mport_id) +{ + struct rio_mport *port; + + mutex_lock(&rio_mport_list_lock); + list_for_each_entry(port, &rio_mports, node) { + if (port->id == mport_id || mport_id == RIO_MPORT_ANY) { + if (port->nscan) + port->nscan = NULL; + if (mport_id != RIO_MPORT_ANY) + break; + } + } + mutex_unlock(&rio_mport_list_lock); + + return 0; +} +EXPORT_SYMBOL_GPL(rio_unregister_scan); + static void rio_fixup_device(struct rio_dev *dev) { } @@ -1274,7 +1499,7 @@ static void disc_work_handler(struct work_struct *_work) work = container_of(_work, struct rio_disc_work, work); pr_debug("RIO: discovery work for mport %d %s\n", work->mport->id, work->mport->name); - rio_disc_mport(work->mport); + work->mport->nscan->discover(work->mport, 0); } int rio_init_mports(void) @@ -1290,12 +1515,15 @@ int rio_init_mports(void) * First, run enumerations and check if we need to perform discovery * on any of the registered mports. */ + mutex_lock(&rio_mport_list_lock); list_for_each_entry(port, &rio_mports, node) { - if (port->host_deviceid >= 0) - rio_enum_mport(port); - else + if (port->host_deviceid >= 0) { + if (port->nscan) + port->nscan->enumerate(port, 0); + } else n++; } + mutex_unlock(&rio_mport_list_lock); if (!n) goto no_disc; @@ -1322,14 +1550,16 @@ int rio_init_mports(void) } n = 0; + mutex_lock(&rio_mport_list_lock); list_for_each_entry(port, &rio_mports, node) { - if (port->host_deviceid < 0) { + if (port->host_deviceid < 0 && port->nscan) { work[n].mport = port; INIT_WORK(&work[n].work, disc_work_handler); queue_work(rio_wq, &work[n].work); n++; } } + mutex_unlock(&rio_mport_list_lock); flush_workqueue(rio_wq); pr_debug("RIO: destroy discovery workqueue\n"); @@ -1342,8 +1572,6 @@ no_disc: return 0; } -device_initcall_sync(rio_init_mports); - static int hdids[RIO_MAX_MPORTS + 1]; static int rio_get_hdid(int index) @@ -1371,7 +1599,10 @@ int rio_register_mport(struct rio_mport *port) port->id = next_portid++; port->host_deviceid = rio_get_hdid(port->id); + port->nscan = NULL; + mutex_lock(&rio_mport_list_lock); list_add_tail(&port->node, &rio_mports); + mutex_unlock(&rio_mport_list_lock); return 0; } @@ -1386,3 +1617,4 @@ EXPORT_SYMBOL_GPL(rio_request_inb_mbox); EXPORT_SYMBOL_GPL(rio_release_inb_mbox); EXPORT_SYMBOL_GPL(rio_request_outb_mbox); EXPORT_SYMBOL_GPL(rio_release_outb_mbox); +EXPORT_SYMBOL_GPL(rio_init_mports); diff --git a/drivers/rapidio/rio.h b/drivers/rapidio/rio.h index b1af414f15e6..c14f864dea5c 100644 --- a/drivers/rapidio/rio.h +++ b/drivers/rapidio/rio.h @@ -15,6 +15,7 @@ #include <linux/rio.h> #define RIO_MAX_CHK_RETRY 3 +#define RIO_MPORT_ANY (-1) /* Functions internal to the RIO core code */ @@ -27,8 +28,6 @@ extern u32 rio_mport_get_efb(struct rio_mport *port, int local, u16 destid, extern int rio_mport_chk_dev_access(struct rio_mport *mport, u16 destid, u8 hopcount); extern int rio_create_sysfs_dev_files(struct rio_dev *rdev); -extern int rio_enum_mport(struct rio_mport *mport); -extern int rio_disc_mport(struct rio_mport *mport); extern int rio_std_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount, u16 table, u16 route_destid, u8 route_port); @@ -39,10 +38,18 @@ extern int rio_std_route_clr_table(struct rio_mport *mport, u16 destid, u8 hopcount, u16 table); extern int rio_set_port_lockout(struct rio_dev *rdev, u32 pnum, int lock); extern struct rio_dev *rio_get_comptag(u32 comp_tag, struct rio_dev *from); +extern int rio_add_device(struct rio_dev *rdev); +extern void rio_switch_init(struct rio_dev *rdev, int do_enum); +extern int rio_enable_rx_tx_port(struct rio_mport *port, int local, u16 destid, + u8 hopcount, u8 port_num); +extern int rio_register_scan(int mport_id, struct rio_scan *scan_ops); +extern int rio_unregister_scan(int mport_id); +extern void rio_attach_device(struct rio_dev *rdev); +extern struct rio_mport *rio_find_mport(int mport_id); /* Structures internal to the RIO core code */ extern struct device_attribute rio_dev_attrs[]; -extern spinlock_t rio_global_list_lock; +extern struct bus_attribute rio_bus_attrs[]; extern struct rio_switch_ops __start_rio_switch_ops[]; extern struct rio_switch_ops __end_rio_switch_ops[]; |