summaryrefslogtreecommitdiffstats
path: root/drivers/rtc
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/rtc')
-rw-r--r--drivers/rtc/Kconfig19
-rw-r--r--drivers/rtc/Makefile1
-rw-r--r--drivers/rtc/interface.c102
-rw-r--r--drivers/rtc/rtc-at32ap700x.c3
-rw-r--r--drivers/rtc/rtc-at91rm9200.c4
-rw-r--r--drivers/rtc/rtc-at91sam9.c1
-rw-r--r--drivers/rtc/rtc-dev.c12
-rw-r--r--drivers/rtc/rtc-fm3130.c2
-rw-r--r--drivers/rtc/rtc-m41t80.c7
-rw-r--r--drivers/rtc/rtc-omap.c1
-rw-r--r--drivers/rtc/rtc-pcf8563.c1
-rw-r--r--drivers/rtc/rtc-pl030.c217
-rw-r--r--drivers/rtc/rtc-pl031.c36
-rw-r--r--drivers/rtc/rtc-s3c.c4
-rw-r--r--drivers/rtc/rtc-sa1100.c37
-rw-r--r--drivers/rtc/rtc-x1205.c111
16 files changed, 486 insertions, 72 deletions
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 4949dc4859be..fc85bf2e4a97 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -469,6 +469,16 @@ config RTC_DRV_VR41XX
To compile this driver as a module, choose M here: the
module will be called rtc-vr41xx.
+config RTC_DRV_PL030
+ tristate "ARM AMBA PL030 RTC"
+ depends on ARM_AMBA
+ help
+ If you say Y here you will get access to ARM AMBA
+ PrimeCell PL030 RTC found on certain ARM SOCs.
+
+ To compile this driver as a module, choose M here: the
+ module will be called rtc-pl030.
+
config RTC_DRV_PL031
tristate "ARM AMBA PL031 RTC"
depends on ARM_AMBA
@@ -495,12 +505,13 @@ config RTC_DRV_AT91RM9200
this is powered by the backup power supply.
config RTC_DRV_AT91SAM9
- tristate "AT91SAM9x"
+ tristate "AT91SAM9x/AT91CAP9"
depends on ARCH_AT91 && !(ARCH_AT91RM9200 || ARCH_AT91X40)
help
- RTC driver for the Atmel AT91SAM9x internal RTT (Real Time Timer).
- These timers are powered by the backup power supply (such as a
- small coin cell battery), but do not need to be used as RTCs.
+ RTC driver for the Atmel AT91SAM9x and AT91CAP9 internal RTT
+ (Real Time Timer). These timers are powered by the backup power
+ supply (such as a small coin cell battery), but do not need to
+ be used as RTCs.
(On AT91SAM9rl chips you probably want to use the dedicated RTC
module and leave the RTT available for other uses.)
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index b6e14d51670b..b5d9d67df887 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -41,6 +41,7 @@ obj-$(CONFIG_RTC_DRV_MAX6902) += rtc-max6902.o
obj-$(CONFIG_RTC_DRV_OMAP) += rtc-omap.o
obj-$(CONFIG_RTC_DRV_PCF8563) += rtc-pcf8563.o
obj-$(CONFIG_RTC_DRV_PCF8583) += rtc-pcf8583.o
+obj-$(CONFIG_RTC_DRV_PL030) += rtc-pl030.o
obj-$(CONFIG_RTC_DRV_PL031) += rtc-pl031.o
obj-$(CONFIG_RTC_DRV_PPC) += rtc-ppc.o
obj-$(CONFIG_RTC_DRV_R9701) += rtc-r9701.o
diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c
index 7e3ad4f3b343..58b7336640ff 100644
--- a/drivers/rtc/interface.c
+++ b/drivers/rtc/interface.c
@@ -126,12 +126,25 @@ int rtc_read_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm)
int err;
struct rtc_time before, now;
int first_time = 1;
+ unsigned long t_now, t_alm;
+ enum { none, day, month, year } missing = none;
+ unsigned days;
- /* The lower level RTC driver may not be capable of filling
- * in all fields of the rtc_time struct (eg. rtc-cmos),
- * and so might instead return -1 in some fields.
- * We deal with that here by grabbing a current RTC timestamp
- * and using values from that for any missing (-1) values.
+ /* The lower level RTC driver may return -1 in some fields,
+ * creating invalid alarm->time values, for reasons like:
+ *
+ * - The hardware may not be capable of filling them in;
+ * many alarms match only on time-of-day fields, not
+ * day/month/year calendar data.
+ *
+ * - Some hardware uses illegal values as "wildcard" match
+ * values, which non-Linux firmware (like a BIOS) may try
+ * to set up as e.g. "alarm 15 minutes after each hour".
+ * Linux uses only oneshot alarms.
+ *
+ * When we see that here, we deal with it by using values from
+ * a current RTC timestamp for any missing (-1) values. The
+ * RTC driver prevents "periodic alarm" modes.
*
* But this can be racey, because some fields of the RTC timestamp
* may have wrapped in the interval since we read the RTC alarm,
@@ -174,6 +187,10 @@ int rtc_read_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm)
if (!alarm->enabled)
return 0;
+ /* full-function RTCs won't have such missing fields */
+ if (rtc_valid_tm(&alarm->time) == 0)
+ return 0;
+
/* get the "after" timestamp, to detect wrapped fields */
err = rtc_read_time(rtc, &now);
if (err < 0)
@@ -183,22 +200,85 @@ int rtc_read_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm)
} while ( before.tm_min != now.tm_min
|| before.tm_hour != now.tm_hour
|| before.tm_mon != now.tm_mon
- || before.tm_year != now.tm_year
- || before.tm_isdst != now.tm_isdst);
+ || before.tm_year != now.tm_year);
- /* Fill in any missing alarm fields using the timestamp */
+ /* Fill in the missing alarm fields using the timestamp; we
+ * know there's at least one since alarm->time is invalid.
+ */
if (alarm->time.tm_sec == -1)
alarm->time.tm_sec = now.tm_sec;
if (alarm->time.tm_min == -1)
alarm->time.tm_min = now.tm_min;
if (alarm->time.tm_hour == -1)
alarm->time.tm_hour = now.tm_hour;
- if (alarm->time.tm_mday == -1)
+
+ /* For simplicity, only support date rollover for now */
+ if (alarm->time.tm_mday == -1) {
alarm->time.tm_mday = now.tm_mday;
- if (alarm->time.tm_mon == -1)
+ missing = day;
+ }
+ if (alarm->time.tm_mon == -1) {
alarm->time.tm_mon = now.tm_mon;
- if (alarm->time.tm_year == -1)
+ if (missing == none)
+ missing = month;
+ }
+ if (alarm->time.tm_year == -1) {
alarm->time.tm_year = now.tm_year;
+ if (missing == none)
+ missing = year;
+ }
+
+ /* with luck, no rollover is needed */
+ rtc_tm_to_time(&now, &t_now);
+ rtc_tm_to_time(&alarm->time, &t_alm);
+ if (t_now < t_alm)
+ goto done;
+
+ switch (missing) {
+
+ /* 24 hour rollover ... if it's now 10am Monday, an alarm that
+ * that will trigger at 5am will do so at 5am Tuesday, which
+ * could also be in the next month or year. This is a common
+ * case, especially for PCs.
+ */
+ case day:
+ dev_dbg(&rtc->dev, "alarm rollover: %s\n", "day");
+ t_alm += 24 * 60 * 60;
+ rtc_time_to_tm(t_alm, &alarm->time);
+ break;
+
+ /* Month rollover ... if it's the 31th, an alarm on the 3rd will
+ * be next month. An alarm matching on the 30th, 29th, or 28th
+ * may end up in the month after that! Many newer PCs support
+ * this type of alarm.
+ */
+ case month:
+ dev_dbg(&rtc->dev, "alarm rollover: %s\n", "month");
+ do {
+ if (alarm->time.tm_mon < 11)
+ alarm->time.tm_mon++;
+ else {
+ alarm->time.tm_mon = 0;
+ alarm->time.tm_year++;
+ }
+ days = rtc_month_days(alarm->time.tm_mon,
+ alarm->time.tm_year);
+ } while (days < alarm->time.tm_mday);
+ break;
+
+ /* Year rollover ... easy except for leap years! */
+ case year:
+ dev_dbg(&rtc->dev, "alarm rollover: %s\n", "year");
+ do {
+ alarm->time.tm_year++;
+ } while (!rtc_valid_tm(&alarm->time));
+ break;
+
+ default:
+ dev_warn(&rtc->dev, "alarm rollover not handled\n");
+ }
+
+done:
return 0;
}
EXPORT_SYMBOL_GPL(rtc_read_alarm);
diff --git a/drivers/rtc/rtc-at32ap700x.c b/drivers/rtc/rtc-at32ap700x.c
index 2ef8cdfda4a7..90b9a6503e15 100644
--- a/drivers/rtc/rtc-at32ap700x.c
+++ b/drivers/rtc/rtc-at32ap700x.c
@@ -265,6 +265,7 @@ static int __init at32_rtc_probe(struct platform_device *pdev)
}
platform_set_drvdata(pdev, rtc);
+ device_init_wakeup(&pdev->dev, 1);
dev_info(&pdev->dev, "Atmel RTC for AT32AP700x at %08lx irq %ld\n",
(unsigned long)rtc->regs, rtc->irq);
@@ -284,6 +285,8 @@ static int __exit at32_rtc_remove(struct platform_device *pdev)
{
struct rtc_at32ap700x *rtc = platform_get_drvdata(pdev);
+ device_init_wakeup(&pdev->dev, 0);
+
free_irq(rtc->irq, rtc);
iounmap(rtc->regs);
rtc_device_unregister(rtc->rtc);
diff --git a/drivers/rtc/rtc-at91rm9200.c b/drivers/rtc/rtc-at91rm9200.c
index 39e64ab1ecb7..9c3db934cc24 100644
--- a/drivers/rtc/rtc-at91rm9200.c
+++ b/drivers/rtc/rtc-at91rm9200.c
@@ -29,10 +29,6 @@
#include <linux/completion.h>
#include <asm/uaccess.h>
-#include <asm/rtc.h>
-
-#include <asm/mach/time.h>
-
#include <asm/arch/at91_rtc.h>
diff --git a/drivers/rtc/rtc-at91sam9.c b/drivers/rtc/rtc-at91sam9.c
index 38d8742a4bdf..f0246ef413a4 100644
--- a/drivers/rtc/rtc-at91sam9.c
+++ b/drivers/rtc/rtc-at91sam9.c
@@ -19,7 +19,6 @@
#include <linux/interrupt.h>
#include <linux/ioctl.h>
-#include <asm/mach/time.h>
#include <asm/arch/board.h>
#include <asm/arch/at91_rtt.h>
diff --git a/drivers/rtc/rtc-dev.c b/drivers/rtc/rtc-dev.c
index 90dfa0df747a..0114a78b7cbb 100644
--- a/drivers/rtc/rtc-dev.c
+++ b/drivers/rtc/rtc-dev.c
@@ -13,6 +13,7 @@
#include <linux/module.h>
#include <linux/rtc.h>
+#include <linux/smp_lock.h>
#include "rtc-core.h"
static dev_t rtc_devt;
@@ -26,8 +27,11 @@ static int rtc_dev_open(struct inode *inode, struct file *file)
struct rtc_device, char_dev);
const struct rtc_class_ops *ops = rtc->ops;
- if (test_and_set_bit_lock(RTC_DEV_BUSY, &rtc->flags))
- return -EBUSY;
+ lock_kernel();
+ if (test_and_set_bit_lock(RTC_DEV_BUSY, &rtc->flags)) {
+ err = -EBUSY;
+ goto out;
+ }
file->private_data = rtc;
@@ -37,11 +41,13 @@ static int rtc_dev_open(struct inode *inode, struct file *file)
rtc->irq_data = 0;
spin_unlock_irq(&rtc->irq_lock);
- return 0;
+ goto out;
}
/* something has gone wrong */
clear_bit_unlock(RTC_DEV_BUSY, &rtc->flags);
+out:
+ unlock_kernel();
return err;
}
diff --git a/drivers/rtc/rtc-fm3130.c b/drivers/rtc/rtc-fm3130.c
index 11644c8fca82..abfdfcbaa059 100644
--- a/drivers/rtc/rtc-fm3130.c
+++ b/drivers/rtc/rtc-fm3130.c
@@ -55,7 +55,7 @@ struct fm3130 {
int alarm;
};
static const struct i2c_device_id fm3130_id[] = {
- { "fm3130-rtc", 0 },
+ { "fm3130", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, fm3130_id);
diff --git a/drivers/rtc/rtc-m41t80.c b/drivers/rtc/rtc-m41t80.c
index a3e0880b38fb..0a19c06019be 100644
--- a/drivers/rtc/rtc-m41t80.c
+++ b/drivers/rtc/rtc-m41t80.c
@@ -17,6 +17,7 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/string.h>
#include <linux/i2c.h>
#include <linux/rtc.h>
@@ -655,12 +656,16 @@ static int wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
static int wdt_open(struct inode *inode, struct file *file)
{
if (MINOR(inode->i_rdev) == WATCHDOG_MINOR) {
- if (test_and_set_bit(0, &wdt_is_open))
+ lock_kernel();
+ if (test_and_set_bit(0, &wdt_is_open)) {
+ unlock_kernel();
return -EBUSY;
+ }
/*
* Activate
*/
wdt_is_open = 1;
+ unlock_kernel();
return 0;
}
return -ENODEV;
diff --git a/drivers/rtc/rtc-omap.c b/drivers/rtc/rtc-omap.c
index 58f81c774943..eb23d8423f42 100644
--- a/drivers/rtc/rtc-omap.c
+++ b/drivers/rtc/rtc-omap.c
@@ -22,7 +22,6 @@
#include <linux/platform_device.h>
#include <asm/io.h>
-#include <asm/mach/time.h>
/* The OMAP1 RTC is a year/month/day/hours/minutes/seconds BCD clock
diff --git a/drivers/rtc/rtc-pcf8563.c b/drivers/rtc/rtc-pcf8563.c
index 0fc4c3630780..748a502a6355 100644
--- a/drivers/rtc/rtc-pcf8563.c
+++ b/drivers/rtc/rtc-pcf8563.c
@@ -302,6 +302,7 @@ static int pcf8563_remove(struct i2c_client *client)
static const struct i2c_device_id pcf8563_id[] = {
{ "pcf8563", 0 },
+ { "rtc8564", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, pcf8563_id);
diff --git a/drivers/rtc/rtc-pl030.c b/drivers/rtc/rtc-pl030.c
new file mode 100644
index 000000000000..8448eeb9d675
--- /dev/null
+++ b/drivers/rtc/rtc-pl030.c
@@ -0,0 +1,217 @@
+/*
+ * linux/drivers/rtc/rtc-pl030.c
+ *
+ * Copyright (C) 2000-2001 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/rtc.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/amba/bus.h>
+#include <linux/io.h>
+
+#define RTC_DR (0)
+#define RTC_MR (4)
+#define RTC_STAT (8)
+#define RTC_EOI (8)
+#define RTC_LR (12)
+#define RTC_CR (16)
+#define RTC_CR_MIE (1 << 0)
+
+struct pl030_rtc {
+ struct rtc_device *rtc;
+ void __iomem *base;
+};
+
+static irqreturn_t pl030_interrupt(int irq, void *dev_id)
+{
+ struct pl030_rtc *rtc = dev_id;
+ writel(0, rtc->base + RTC_EOI);
+ return IRQ_HANDLED;
+}
+
+static int pl030_open(struct device *dev)
+{
+ return 0;
+}
+
+static void pl030_release(struct device *dev)
+{
+}
+
+static int pl030_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
+{
+ return -ENOIOCTLCMD;
+}
+
+static int pl030_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+ struct pl030_rtc *rtc = dev_get_drvdata(dev);
+
+ rtc_time_to_tm(readl(rtc->base + RTC_MR), &alrm->time);
+ return 0;
+}
+
+static int pl030_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+ struct pl030_rtc *rtc = dev_get_drvdata(dev);
+ unsigned long time;
+ int ret;
+
+ /*
+ * At the moment, we can only deal with non-wildcarded alarm times.
+ */
+ ret = rtc_valid_tm(&alrm->time);
+ if (ret == 0)
+ ret = rtc_tm_to_time(&alrm->time, &time);
+ if (ret == 0)
+ writel(time, rtc->base + RTC_MR);
+ return ret;
+}
+
+static int pl030_read_time(struct device *dev, struct rtc_time *tm)
+{
+ struct pl030_rtc *rtc = dev_get_drvdata(dev);
+
+ rtc_time_to_tm(readl(rtc->base + RTC_DR), tm);
+
+ return 0;
+}
+
+/*
+ * Set the RTC time. Unfortunately, we can't accurately set
+ * the point at which the counter updates.
+ *
+ * Also, since RTC_LR is transferred to RTC_CR on next rising
+ * edge of the 1Hz clock, we must write the time one second
+ * in advance.
+ */
+static int pl030_set_time(struct device *dev, struct rtc_time *tm)
+{
+ struct pl030_rtc *rtc = dev_get_drvdata(dev);
+ unsigned long time;
+ int ret;
+
+ ret = rtc_tm_to_time(tm, &time);
+ if (ret == 0)
+ writel(time + 1, rtc->base + RTC_LR);
+
+ return ret;
+}
+
+static const struct rtc_class_ops pl030_ops = {
+ .open = pl030_open,
+ .release = pl030_release,
+ .ioctl = pl030_ioctl,
+ .read_time = pl030_read_time,
+ .set_time = pl030_set_time,
+ .read_alarm = pl030_read_alarm,
+ .set_alarm = pl030_set_alarm,
+};
+
+static int pl030_probe(struct amba_device *dev, void *id)
+{
+ struct pl030_rtc *rtc;
+ int ret;
+
+ ret = amba_request_regions(dev, NULL);
+ if (ret)
+ goto err_req;
+
+ rtc = kmalloc(sizeof(*rtc), GFP_KERNEL);
+ if (!rtc) {
+ ret = -ENOMEM;
+ goto err_rtc;
+ }
+
+ rtc->base = ioremap(dev->res.start, SZ_4K);
+ if (!rtc->base) {
+ ret = -ENOMEM;
+ goto err_map;
+ }
+
+ __raw_writel(0, rtc->base + RTC_CR);
+ __raw_writel(0, rtc->base + RTC_EOI);
+
+ amba_set_drvdata(dev, rtc);
+
+ ret = request_irq(dev->irq[0], pl030_interrupt, IRQF_DISABLED,
+ "rtc-pl030", rtc);
+ if (ret)
+ goto err_irq;
+
+ rtc->rtc = rtc_device_register("pl030", &dev->dev, &pl030_ops,
+ THIS_MODULE);
+ if (IS_ERR(rtc->rtc)) {
+ ret = PTR_ERR(rtc->rtc);
+ goto err_reg;
+ }
+
+ return 0;
+
+ err_reg:
+ free_irq(dev->irq[0], rtc);
+ err_irq:
+ iounmap(rtc->base);
+ err_map:
+ kfree(rtc);
+ err_rtc:
+ amba_release_regions(dev);
+ err_req:
+ return ret;
+}
+
+static int pl030_remove(struct amba_device *dev)
+{
+ struct pl030_rtc *rtc = amba_get_drvdata(dev);
+
+ amba_set_drvdata(dev, NULL);
+
+ writel(0, rtc->base + RTC_CR);
+
+ free_irq(dev->irq[0], rtc);
+ rtc_device_unregister(rtc->rtc);
+ iounmap(rtc->base);
+ kfree(rtc);
+ amba_release_regions(dev);
+
+ return 0;
+}
+
+static struct amba_id pl030_ids[] = {
+ {
+ .id = 0x00041030,
+ .mask = 0x000fffff,
+ },
+ { 0, 0 },
+};
+
+static struct amba_driver pl030_driver = {
+ .drv = {
+ .name = "rtc-pl030",
+ },
+ .probe = pl030_probe,
+ .remove = pl030_remove,
+ .id_table = pl030_ids,
+};
+
+static int __init pl030_init(void)
+{
+ return amba_driver_register(&pl030_driver);
+}
+
+static void __exit pl030_exit(void)
+{
+ amba_driver_unregister(&pl030_driver);
+}
+
+module_init(pl030_init);
+module_exit(pl030_exit);
+
+MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>");
+MODULE_DESCRIPTION("ARM AMBA PL030 RTC Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/rtc/rtc-pl031.c b/drivers/rtc/rtc-pl031.c
index 2fd49edcc712..08b4610ec5a6 100644
--- a/drivers/rtc/rtc-pl031.c
+++ b/drivers/rtc/rtc-pl031.c
@@ -12,23 +12,12 @@
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
-
-#include <linux/platform_device.h>
#include <linux/module.h>
#include <linux/rtc.h>
#include <linux/init.h>
-#include <linux/fs.h>
#include <linux/interrupt.h>
-#include <linux/string.h>
-#include <linux/pm.h>
-#include <linux/bitops.h>
-
#include <linux/amba/bus.h>
-
-#include <asm/io.h>
-#include <asm/hardware.h>
-#include <asm/irq.h>
-#include <asm/rtc.h>
+#include <linux/io.h>
/*
* Register definitions
@@ -142,13 +131,12 @@ static int pl031_remove(struct amba_device *adev)
{
struct pl031_local *ldata = dev_get_drvdata(&adev->dev);
- if (ldata) {
- dev_set_drvdata(&adev->dev, NULL);
- free_irq(adev->irq[0], ldata->rtc);
- rtc_device_unregister(ldata->rtc);
- iounmap(ldata->base);
- kfree(ldata);
- }
+ amba_set_drvdata(adev, NULL);
+ free_irq(adev->irq[0], ldata->rtc);
+ rtc_device_unregister(ldata->rtc);
+ iounmap(ldata->base);
+ kfree(ldata);
+ amba_release_regions(adev);
return 0;
}
@@ -158,13 +146,15 @@ static int pl031_probe(struct amba_device *adev, void *id)
int ret;
struct pl031_local *ldata;
+ ret = amba_request_regions(adev, NULL);
+ if (ret)
+ goto err_req;
ldata = kmalloc(sizeof(struct pl031_local), GFP_KERNEL);
if (!ldata) {
ret = -ENOMEM;
goto out;
}
- dev_set_drvdata(&adev->dev, ldata);
ldata->base = ioremap(adev->res.start,
adev->res.end - adev->res.start + 1);
@@ -173,6 +163,8 @@ static int pl031_probe(struct amba_device *adev, void *id)
goto out_no_remap;
}
+ amba_set_drvdata(adev, ldata);
+
if (request_irq(adev->irq[0], pl031_interrupt, IRQF_DISABLED,
"rtc-pl031", ldata->rtc)) {
ret = -EIO;
@@ -192,10 +184,12 @@ out_no_rtc:
free_irq(adev->irq[0], ldata->rtc);
out_no_irq:
iounmap(ldata->base);
+ amba_set_drvdata(adev, NULL);
out_no_remap:
- dev_set_drvdata(&adev->dev, NULL);
kfree(ldata);
out:
+ amba_release_regions(adev);
+err_req:
return ret;
}
diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c
index f26e0cad8f16..fed86e507fdf 100644
--- a/drivers/rtc/rtc-s3c.c
+++ b/drivers/rtc/rtc-s3c.c
@@ -26,10 +26,6 @@
#include <asm/uaccess.h>
#include <asm/io.h>
#include <asm/irq.h>
-#include <asm/rtc.h>
-
-#include <asm/mach/time.h>
-
#include <asm/plat-s3c/regs-rtc.h>
/* I have yet to find an S3C implementation with more than one
diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c
index 67421b0d3a7b..f47294c60148 100644
--- a/drivers/rtc/rtc-sa1100.c
+++ b/drivers/rtc/rtc-sa1100.c
@@ -33,7 +33,6 @@
#include <asm/hardware.h>
#include <asm/irq.h>
-#include <asm/rtc.h>
#ifdef CONFIG_ARCH_PXA
#include <asm/arch/pxa-regs.h>
@@ -47,6 +46,42 @@ static unsigned long rtc_freq = 1024;
static struct rtc_time rtc_alarm;
static DEFINE_SPINLOCK(sa1100_rtc_lock);
+static inline int rtc_periodic_alarm(struct rtc_time *tm)
+{
+ return (tm->tm_year == -1) ||
+ ((unsigned)tm->tm_mon >= 12) ||
+ ((unsigned)(tm->tm_mday - 1) >= 31) ||
+ ((unsigned)tm->tm_hour > 23) ||
+ ((unsigned)tm->tm_min > 59) ||
+ ((unsigned)tm->tm_sec > 59);
+}
+
+/*
+ * Calculate the next alarm time given the requested alarm time mask
+ * and the current time.
+ */
+static void rtc_next_alarm_time(struct rtc_time *next, struct rtc_time *now, struct rtc_time *alrm)
+{
+ unsigned long next_time;
+ unsigned long now_time;
+
+ next->tm_year = now->tm_year;
+ next->tm_mon = now->tm_mon;
+ next->tm_mday = now->tm_mday;
+ next->tm_hour = alrm->tm_hour;
+ next->tm_min = alrm->tm_min;
+ next->tm_sec = alrm->tm_sec;
+
+ rtc_tm_to_time(now, &now_time);
+ rtc_tm_to_time(next, &next_time);
+
+ if (next_time < now_time) {
+ /* Advance one day */
+ next_time += 60 * 60 * 24;
+ rtc_time_to_tm(next_time, next);
+ }
+}
+
static int rtc_update_alarm(struct rtc_time *alrm)
{
struct rtc_time alarm_tm, now_tm;
diff --git a/drivers/rtc/rtc-x1205.c b/drivers/rtc/rtc-x1205.c
index eaf55945f21b..7dcfba1bbfe1 100644
--- a/drivers/rtc/rtc-x1205.c
+++ b/drivers/rtc/rtc-x1205.c
@@ -71,6 +71,7 @@
#define X1205_SR_RTCF 0x01 /* Clock failure */
#define X1205_SR_WEL 0x02 /* Write Enable Latch */
#define X1205_SR_RWEL 0x04 /* Register Write Enable */
+#define X1205_SR_AL0 0x20 /* Alarm 0 match */
#define X1205_DTR_DTR0 0x01
#define X1205_DTR_DTR1 0x02
@@ -78,6 +79,8 @@
#define X1205_HR_MIL 0x80 /* Set in ccr.hour for 24 hr mode */
+#define X1205_INT_AL0E 0x20 /* Alarm 0 enable */
+
static struct i2c_driver x1205_driver;
/*
@@ -89,8 +92,8 @@ static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm,
unsigned char reg_base)
{
unsigned char dt_addr[2] = { 0, reg_base };
-
unsigned char buf[8];
+ int i;
struct i2c_msg msgs[] = {
{ client->addr, 0, 2, dt_addr }, /* setup read ptr */
@@ -98,7 +101,7 @@ static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm,
};
/* read date registers */
- if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
+ if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) {
dev_err(&client->dev, "%s: read error\n", __func__);
return -EIO;
}
@@ -110,6 +113,11 @@ static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm,
buf[0], buf[1], buf[2], buf[3],
buf[4], buf[5], buf[6], buf[7]);
+ /* Mask out the enable bits if these are alarm registers */
+ if (reg_base < X1205_CCR_BASE)
+ for (i = 0; i <= 4; i++)
+ buf[i] &= 0x7F;
+
tm->tm_sec = BCD2BIN(buf[CCR_SEC]);
tm->tm_min = BCD2BIN(buf[CCR_MIN]);
tm->tm_hour = BCD2BIN(buf[CCR_HOUR] & 0x3F); /* hr is 0-23 */
@@ -138,7 +146,7 @@ static int x1205_get_status(struct i2c_client *client, unsigned char *sr)
};
/* read status register */
- if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
+ if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) {
dev_err(&client->dev, "%s: read error\n", __func__);
return -EIO;
}
@@ -147,10 +155,11 @@ static int x1205_get_status(struct i2c_client *client, unsigned char *sr)
}
static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm,
- int datetoo, u8 reg_base)
+ int datetoo, u8 reg_base, unsigned char alm_enable)
{
- int i, xfer;
+ int i, xfer, nbytes;
unsigned char buf[8];
+ unsigned char rdata[10] = { 0, reg_base };
static const unsigned char wel[3] = { 0, X1205_REG_SR,
X1205_SR_WEL };
@@ -189,6 +198,11 @@ static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm,
buf[CCR_Y2K] = BIN2BCD(tm->tm_year / 100);
}
+ /* If writing alarm registers, set compare bits on registers 0-4 */
+ if (reg_base < X1205_CCR_BASE)
+ for (i = 0; i <= 4; i++)
+ buf[i] |= 0x80;
+
/* this sequence is required to unlock the chip */
if ((xfer = i2c_master_send(client, wel, 3)) != 3) {
dev_err(&client->dev, "%s: wel - %d\n", __func__, xfer);
@@ -200,19 +214,57 @@ static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm,
return -EIO;
}
+
/* write register's data */
- for (i = 0; i < (datetoo ? 8 : 3); i++) {
- unsigned char rdata[3] = { 0, reg_base + i, buf[i] };
+ if (datetoo)
+ nbytes = 8;
+ else
+ nbytes = 3;
+ for (i = 0; i < nbytes; i++)
+ rdata[2+i] = buf[i];
+
+ xfer = i2c_master_send(client, rdata, nbytes+2);
+ if (xfer != nbytes+2) {
+ dev_err(&client->dev,
+ "%s: result=%d addr=%02x, data=%02x\n",
+ __func__,
+ xfer, rdata[1], rdata[2]);
+ return -EIO;
+ }
+
+ /* If we wrote to the nonvolatile region, wait 10msec for write cycle*/
+ if (reg_base < X1205_CCR_BASE) {
+ unsigned char al0e[3] = { 0, X1205_REG_INT, 0 };
+
+ msleep(10);
- xfer = i2c_master_send(client, rdata, 3);
+ /* ...and set or clear the AL0E bit in the INT register */
+
+ /* Need to set RWEL again as the write has cleared it */
+ xfer = i2c_master_send(client, rwel, 3);
if (xfer != 3) {
dev_err(&client->dev,
- "%s: xfer=%d addr=%02x, data=%02x\n",
+ "%s: aloe rwel - %d\n",
__func__,
- xfer, rdata[1], rdata[2]);
+ xfer);
+ return -EIO;
+ }
+
+ if (alm_enable)
+ al0e[2] = X1205_INT_AL0E;
+
+ xfer = i2c_master_send(client, al0e, 3);
+ if (xfer != 3) {
+ dev_err(&client->dev,
+ "%s: al0e - %d\n",
+ __func__,
+ xfer);
return -EIO;
}
- };
+
+ /* and wait 10msec again for this write to complete */
+ msleep(10);
+ }
/* disable further writes */
if ((xfer = i2c_master_send(client, diswe, 3)) != 3) {
@@ -230,9 +282,9 @@ static int x1205_fix_osc(struct i2c_client *client)
tm.tm_hour = tm.tm_min = tm.tm_sec = 0;
- if ((err = x1205_set_datetime(client, &tm, 0, X1205_CCR_BASE)) < 0)
- dev_err(&client->dev,
- "unable to restart the oscillator\n");
+ err = x1205_set_datetime(client, &tm, 0, X1205_CCR_BASE, 0);
+ if (err < 0)
+ dev_err(&client->dev, "unable to restart the oscillator\n");
return err;
}
@@ -248,7 +300,7 @@ static int x1205_get_dtrim(struct i2c_client *client, int *trim)
};
/* read dtr register */
- if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
+ if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) {
dev_err(&client->dev, "%s: read error\n", __func__);
return -EIO;
}
@@ -280,7 +332,7 @@ static int x1205_get_atrim(struct i2c_client *client, int *trim)
};
/* read atr register */
- if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
+ if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) {
dev_err(&client->dev, "%s: read error\n", __func__);
return -EIO;
}
@@ -403,14 +455,33 @@ static int x1205_validate_client(struct i2c_client *client)
static int x1205_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
{
- return x1205_get_datetime(to_i2c_client(dev),
- &alrm->time, X1205_ALM0_BASE);
+ int err;
+ unsigned char intreg, status;
+ static unsigned char int_addr[2] = { 0, X1205_REG_INT };
+ struct i2c_client *client = to_i2c_client(dev);
+ struct i2c_msg msgs[] = {
+ { client->addr, 0, 2, int_addr }, /* setup read ptr */
+ { client->addr, I2C_M_RD, 1, &intreg }, /* read INT register */
+ };
+
+ /* read interrupt register and status register */
+ if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) {
+ dev_err(&client->dev, "%s: read error\n", __func__);
+ return -EIO;
+ }
+ err = x1205_get_status(client, &status);
+ if (err == 0) {
+ alrm->pending = (status & X1205_SR_AL0) ? 1 : 0;
+ alrm->enabled = (intreg & X1205_INT_AL0E) ? 1 : 0;
+ err = x1205_get_datetime(client, &alrm->time, X1205_ALM0_BASE);
+ }
+ return err;
}
static int x1205_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
{
return x1205_set_datetime(to_i2c_client(dev),
- &alrm->time, 1, X1205_ALM0_BASE);
+ &alrm->time, 1, X1205_ALM0_BASE, alrm->enabled);
}
static int x1205_rtc_read_time(struct device *dev, struct rtc_time *tm)
@@ -422,7 +493,7 @@ static int x1205_rtc_read_time(struct device *dev, struct rtc_time *tm)
static int x1205_rtc_set_time(struct device *dev, struct rtc_time *tm)
{
return x1205_set_datetime(to_i2c_client(dev),
- tm, 1, X1205_CCR_BASE);
+ tm, 1, X1205_CCR_BASE, 0);
}
static int x1205_rtc_proc(struct device *dev, struct seq_file *seq)