summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/atari_scsi.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/atari_scsi.c')
-rw-r--r--drivers/scsi/atari_scsi.c102
1 files changed, 31 insertions, 71 deletions
diff --git a/drivers/scsi/atari_scsi.c b/drivers/scsi/atari_scsi.c
index 5ede3daa93dc..78d1b2963f2c 100644
--- a/drivers/scsi/atari_scsi.c
+++ b/drivers/scsi/atari_scsi.c
@@ -66,7 +66,6 @@
#include <linux/module.h>
#include <linux/types.h>
-#include <linux/delay.h>
#include <linux/blkdev.h>
#include <linux/interrupt.h>
#include <linux/init.h>
@@ -98,7 +97,6 @@
#define NCR5380_queue_command atari_scsi_queue_command
#define NCR5380_abort atari_scsi_abort
-#define NCR5380_show_info atari_scsi_show_info
#define NCR5380_info atari_scsi_info
#define NCR5380_dma_read_setup(instance, data, count) \
@@ -161,23 +159,10 @@ static inline unsigned long SCSI_DMA_GETADR(void)
return adr;
}
-#define HOSTDATA_DMALEN (((struct NCR5380_hostdata *) \
- (atari_scsi_host->hostdata))->dma_len)
-
-/* Time (in jiffies) to wait after a reset; the SCSI standard calls for 250ms,
- * we usually do 0.5s to be on the safe side. But Toshiba CD-ROMs once more
- * need ten times the standard value... */
-#ifndef CONFIG_ATARI_SCSI_TOSHIBA_DELAY
-#define AFTER_RESET_DELAY (HZ/2)
-#else
-#define AFTER_RESET_DELAY (5*HZ/2)
-#endif
-
#ifdef REAL_DMA
static void atari_scsi_fetch_restbytes(void);
#endif
-static struct Scsi_Host *atari_scsi_host;
static unsigned char (*atari_scsi_reg_read)(unsigned char reg);
static void (*atari_scsi_reg_write)(unsigned char reg, unsigned char value);
@@ -208,12 +193,12 @@ static int setup_cmd_per_lun = -1;
module_param(setup_cmd_per_lun, int, 0);
static int setup_sg_tablesize = -1;
module_param(setup_sg_tablesize, int, 0);
-#ifdef SUPPORT_TAGS
static int setup_use_tagged_queuing = -1;
module_param(setup_use_tagged_queuing, int, 0);
-#endif
static int setup_hostid = -1;
module_param(setup_hostid, int, 0);
+static int setup_toshiba_delay = -1;
+module_param(setup_toshiba_delay, int, 0);
#if defined(REAL_DMA)
@@ -273,15 +258,17 @@ static void scsi_dma_buserr(int irq, void *dummy)
#endif
-static irqreturn_t scsi_tt_intr(int irq, void *dummy)
+static irqreturn_t scsi_tt_intr(int irq, void *dev)
{
#ifdef REAL_DMA
+ struct Scsi_Host *instance = dev;
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
int dma_stat;
dma_stat = tt_scsi_dma.dma_ctrl;
- dprintk(NDEBUG_INTR, "scsi%d: NCR5380 interrupt, DMA status = %02x\n",
- atari_scsi_host->host_no, dma_stat & 0xff);
+ dsprintk(NDEBUG_INTR, instance, "NCR5380 interrupt, DMA status = %02x\n",
+ dma_stat & 0xff);
/* Look if it was the DMA that has interrupted: First possibility
* is that a bus error occurred...
@@ -304,7 +291,8 @@ static irqreturn_t scsi_tt_intr(int irq, void *dummy)
* data reg!
*/
if ((dma_stat & 0x02) && !(dma_stat & 0x40)) {
- atari_dma_residual = HOSTDATA_DMALEN - (SCSI_DMA_READ_P(dma_addr) - atari_dma_startaddr);
+ atari_dma_residual = hostdata->dma_len -
+ (SCSI_DMA_READ_P(dma_addr) - atari_dma_startaddr);
dprintk(NDEBUG_DMA, "SCSI DMA: There are %ld residual bytes.\n",
atari_dma_residual);
@@ -356,15 +344,17 @@ static irqreturn_t scsi_tt_intr(int irq, void *dummy)
#endif /* REAL_DMA */
- NCR5380_intr(irq, dummy);
+ NCR5380_intr(irq, dev);
return IRQ_HANDLED;
}
-static irqreturn_t scsi_falcon_intr(int irq, void *dummy)
+static irqreturn_t scsi_falcon_intr(int irq, void *dev)
{
#ifdef REAL_DMA
+ struct Scsi_Host *instance = dev;
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
int dma_stat;
/* Turn off DMA and select sector counter register before
@@ -399,7 +389,7 @@ static irqreturn_t scsi_falcon_intr(int irq, void *dummy)
printk(KERN_ERR "SCSI DMA error: %ld bytes lost in "
"ST-DMA fifo\n", transferred & 15);
- atari_dma_residual = HOSTDATA_DMALEN - transferred;
+ atari_dma_residual = hostdata->dma_len - transferred;
dprintk(NDEBUG_DMA, "SCSI DMA: There are %ld residual bytes.\n",
atari_dma_residual);
} else
@@ -411,13 +401,14 @@ static irqreturn_t scsi_falcon_intr(int irq, void *dummy)
* data to the original destination address.
*/
memcpy(atari_dma_orig_addr, phys_to_virt(atari_dma_startaddr),
- HOSTDATA_DMALEN - atari_dma_residual);
+ hostdata->dma_len - atari_dma_residual);
atari_dma_orig_addr = NULL;
}
#endif /* REAL_DMA */
- NCR5380_intr(irq, dummy);
+ NCR5380_intr(irq, dev);
+
return IRQ_HANDLED;
}
@@ -488,7 +479,7 @@ static int __init atari_scsi_setup(char *str)
* Defaults depend on TT or Falcon, determined at run time.
* Negative values mean don't change.
*/
- int ints[6];
+ int ints[8];
get_options(str, ARRAY_SIZE(ints), ints);
@@ -504,10 +495,11 @@ static int __init atari_scsi_setup(char *str)
setup_sg_tablesize = ints[3];
if (ints[0] >= 4)
setup_hostid = ints[4];
-#ifdef SUPPORT_TAGS
if (ints[0] >= 5)
setup_use_tagged_queuing = ints[5];
-#endif
+ /* ints[6] (use_pdma) is ignored */
+ if (ints[0] >= 7)
+ setup_toshiba_delay = ints[7];
return 1;
}
@@ -516,38 +508,6 @@ __setup("atascsi=", atari_scsi_setup);
#endif /* !MODULE */
-#ifdef CONFIG_ATARI_SCSI_RESET_BOOT
-static void __init atari_scsi_reset_boot(void)
-{
- unsigned long end;
-
- /*
- * Do a SCSI reset to clean up the bus during initialization. No messing
- * with the queues, interrupts, or locks necessary here.
- */
-
- printk("Atari SCSI: resetting the SCSI bus...");
-
- /* get in phase */
- NCR5380_write(TARGET_COMMAND_REG,
- PHASE_SR_TO_TCR(NCR5380_read(STATUS_REG)));
-
- /* assert RST */
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_RST);
- /* The min. reset hold time is 25us, so 40us should be enough */
- udelay(50);
- /* reset RST and interrupt */
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- NCR5380_read(RESET_PARITY_INTERRUPT_REG);
-
- end = jiffies + AFTER_RESET_DELAY;
- while (time_before(jiffies, end))
- barrier();
-
- printk(" done\n");
-}
-#endif
-
#if defined(REAL_DMA)
static unsigned long atari_scsi_dma_setup(struct Scsi_Host *instance,
@@ -815,14 +775,14 @@ static int atari_scsi_bus_reset(struct scsi_cmnd *cmd)
static struct scsi_host_template atari_scsi_template = {
.module = THIS_MODULE,
.proc_name = DRV_MODULE_NAME,
- .show_info = atari_scsi_show_info,
.name = "Atari native SCSI",
.info = atari_scsi_info,
.queuecommand = atari_scsi_queue_command,
.eh_abort_handler = atari_scsi_abort,
.eh_bus_reset_handler = atari_scsi_bus_reset,
.this_id = 7,
- .use_clustering = DISABLE_CLUSTERING
+ .use_clustering = DISABLE_CLUSTERING,
+ .cmd_size = NCR5380_CMD_SIZE,
};
static int __init atari_scsi_probe(struct platform_device *pdev)
@@ -880,7 +840,7 @@ static int __init atari_scsi_probe(struct platform_device *pdev)
} else {
/* Test if a host id is set in the NVRam */
if (ATARIHW_PRESENT(TT_CLK) && nvram_check_checksum()) {
- unsigned char b = nvram_read_byte(14);
+ unsigned char b = nvram_read_byte(16);
/* Arbitration enabled? (for TOS)
* If yes, use configured host ID
@@ -915,21 +875,18 @@ static int __init atari_scsi_probe(struct platform_device *pdev)
error = -ENOMEM;
goto fail_alloc;
}
- atari_scsi_host = instance;
-
-#ifdef CONFIG_ATARI_SCSI_RESET_BOOT
- atari_scsi_reset_boot();
-#endif
instance->irq = irq->start;
host_flags |= IS_A_TT() ? 0 : FLAG_LATE_DMA_SETUP;
-
#ifdef SUPPORT_TAGS
host_flags |= setup_use_tagged_queuing > 0 ? FLAG_TAGGED_QUEUING : 0;
#endif
+ host_flags |= setup_toshiba_delay > 0 ? FLAG_TOSHIBA_DELAY : 0;
- NCR5380_init(instance, host_flags);
+ error = NCR5380_init(instance, host_flags);
+ if (error)
+ goto fail_init;
if (IS_A_TT()) {
error = request_irq(instance->irq, scsi_tt_intr, 0,
@@ -975,6 +932,8 @@ static int __init atari_scsi_probe(struct platform_device *pdev)
#endif
}
+ NCR5380_maybe_reset_bus(instance);
+
error = scsi_add_host(instance, NULL);
if (error)
goto fail_host;
@@ -989,6 +948,7 @@ fail_host:
free_irq(instance->irq, instance);
fail_irq:
NCR5380_exit(instance);
+fail_init:
scsi_host_put(instance);
fail_alloc:
if (atari_dma_buffer)
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-29 11:24:17 +0000