summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/lpfc/lpfc_init.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/lpfc/lpfc_init.c')
-rw-r--r--drivers/scsi/lpfc/lpfc_init.c225
1 files changed, 108 insertions, 117 deletions
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index a5769a9960ac..0b2c53af85c7 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -306,10 +306,10 @@ lpfc_dump_wakeup_param_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq)
dist = dist_char[prg->dist];
if ((prg->dist == 3) && (prg->num == 0))
- sprintf(phba->OptionROMVersion, "%d.%d%d",
+ snprintf(phba->OptionROMVersion, 32, "%d.%d%d",
prg->ver, prg->rev, prg->lev);
else
- sprintf(phba->OptionROMVersion, "%d.%d%d%c%d",
+ snprintf(phba->OptionROMVersion, 32, "%d.%d%d%c%d",
prg->ver, prg->rev, prg->lev,
dist, prg->num);
mempool_free(pmboxq, phba->mbox_mem_pool);
@@ -649,7 +649,7 @@ lpfc_config_port_post(struct lpfc_hba *phba)
* 0 - success
* Any other value - error
**/
-int
+static int
lpfc_hba_init_link(struct lpfc_hba *phba, uint32_t flag)
{
return lpfc_hba_init_link_fc_topology(phba, phba->cfg_topology, flag);
@@ -750,7 +750,7 @@ lpfc_hba_init_link_fc_topology(struct lpfc_hba *phba, uint32_t fc_topology,
* 0 - success
* Any other value - error
**/
-int
+static int
lpfc_hba_down_link(struct lpfc_hba *phba, uint32_t flag)
{
LPFC_MBOXQ_t *pmb;
@@ -988,9 +988,12 @@ lpfc_hba_down_post_s4(struct lpfc_hba *phba)
LIST_HEAD(aborts);
unsigned long iflag = 0;
struct lpfc_sglq *sglq_entry = NULL;
+ struct lpfc_sli *psli = &phba->sli;
+ struct lpfc_sli_ring *pring;
lpfc_hba_free_post_buf(phba);
lpfc_hba_clean_txcmplq(phba);
+ pring = &psli->ring[LPFC_ELS_RING];
/* At this point in time the HBA is either reset or DOA. Either
* way, nothing should be on lpfc_abts_els_sgl_list, it needs to be
@@ -1008,8 +1011,10 @@ lpfc_hba_down_post_s4(struct lpfc_hba *phba)
&phba->sli4_hba.lpfc_abts_els_sgl_list, list)
sglq_entry->state = SGL_FREED;
+ spin_lock(&pring->ring_lock);
list_splice_init(&phba->sli4_hba.lpfc_abts_els_sgl_list,
&phba->sli4_hba.lpfc_sgl_list);
+ spin_unlock(&pring->ring_lock);
spin_unlock(&phba->sli4_hba.abts_sgl_list_lock);
/* abts_scsi_buf_list_lock required because worker thread uses this
* list.
@@ -3047,6 +3052,7 @@ lpfc_sli4_xri_sgl_update(struct lpfc_hba *phba)
LIST_HEAD(els_sgl_list);
LIST_HEAD(scsi_sgl_list);
int rc;
+ struct lpfc_sli_ring *pring = &phba->sli.ring[LPFC_ELS_RING];
/*
* update on pci function's els xri-sgl list
@@ -3087,7 +3093,9 @@ lpfc_sli4_xri_sgl_update(struct lpfc_hba *phba)
list_add_tail(&sglq_entry->list, &els_sgl_list);
}
spin_lock_irq(&phba->hbalock);
+ spin_lock(&pring->ring_lock);
list_splice_init(&els_sgl_list, &phba->sli4_hba.lpfc_sgl_list);
+ spin_unlock(&pring->ring_lock);
spin_unlock_irq(&phba->hbalock);
} else if (els_xri_cnt < phba->sli4_hba.els_xri_cnt) {
/* els xri-sgl shrinked */
@@ -3097,7 +3105,9 @@ lpfc_sli4_xri_sgl_update(struct lpfc_hba *phba)
"%d to %d\n", phba->sli4_hba.els_xri_cnt,
els_xri_cnt);
spin_lock_irq(&phba->hbalock);
+ spin_lock(&pring->ring_lock);
list_splice_init(&phba->sli4_hba.lpfc_sgl_list, &els_sgl_list);
+ spin_unlock(&pring->ring_lock);
spin_unlock_irq(&phba->hbalock);
/* release extra els sgls from list */
for (i = 0; i < xri_cnt; i++) {
@@ -3110,7 +3120,9 @@ lpfc_sli4_xri_sgl_update(struct lpfc_hba *phba)
}
}
spin_lock_irq(&phba->hbalock);
+ spin_lock(&pring->ring_lock);
list_splice_init(&els_sgl_list, &phba->sli4_hba.lpfc_sgl_list);
+ spin_unlock(&pring->ring_lock);
spin_unlock_irq(&phba->hbalock);
} else
lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
@@ -3165,9 +3177,11 @@ lpfc_sli4_xri_sgl_update(struct lpfc_hba *phba)
for (i = 0; i < scsi_xri_cnt; i++) {
list_remove_head(&scsi_sgl_list, psb,
struct lpfc_scsi_buf, list);
- pci_pool_free(phba->lpfc_scsi_dma_buf_pool, psb->data,
- psb->dma_handle);
- kfree(psb);
+ if (psb) {
+ pci_pool_free(phba->lpfc_scsi_dma_buf_pool,
+ psb->data, psb->dma_handle);
+ kfree(psb);
+ }
}
spin_lock_irq(&phba->scsi_buf_list_get_lock);
phba->sli4_hba.scsi_xri_cnt -= scsi_xri_cnt;
@@ -3550,7 +3564,7 @@ lpfc_fcf_redisc_wait_start_timer(struct lpfc_hba *phba)
* list, and then worker thread shall be waked up for processing from the
* worker thread context.
**/
-void
+static void
lpfc_sli4_fcf_redisc_wait_tmo(unsigned long ptr)
{
struct lpfc_hba *phba = (struct lpfc_hba *)ptr;
@@ -5680,10 +5694,13 @@ static void
lpfc_free_els_sgl_list(struct lpfc_hba *phba)
{
LIST_HEAD(sglq_list);
+ struct lpfc_sli_ring *pring = &phba->sli.ring[LPFC_ELS_RING];
/* Retrieve all els sgls from driver list */
spin_lock_irq(&phba->hbalock);
+ spin_lock(&pring->ring_lock);
list_splice_init(&phba->sli4_hba.lpfc_sgl_list, &sglq_list);
+ spin_unlock(&pring->ring_lock);
spin_unlock_irq(&phba->hbalock);
/* Now free the sgl list */
@@ -5848,16 +5865,14 @@ lpfc_sli4_create_rpi_hdr(struct lpfc_hba *phba)
if (!dmabuf)
return NULL;
- dmabuf->virt = dma_alloc_coherent(&phba->pcidev->dev,
- LPFC_HDR_TEMPLATE_SIZE,
- &dmabuf->phys,
- GFP_KERNEL);
+ dmabuf->virt = dma_zalloc_coherent(&phba->pcidev->dev,
+ LPFC_HDR_TEMPLATE_SIZE,
+ &dmabuf->phys, GFP_KERNEL);
if (!dmabuf->virt) {
rpi_hdr = NULL;
goto err_free_dmabuf;
}
- memset(dmabuf->virt, 0, LPFC_HDR_TEMPLATE_SIZE);
if (!IS_ALIGNED(dmabuf->phys, LPFC_HDR_TEMPLATE_SIZE)) {
rpi_hdr = NULL;
goto err_free_coherent;
@@ -6246,14 +6261,11 @@ lpfc_sli_pci_mem_setup(struct lpfc_hba *phba)
}
/* Allocate memory for SLI-2 structures */
- phba->slim2p.virt = dma_alloc_coherent(&pdev->dev,
- SLI2_SLIM_SIZE,
- &phba->slim2p.phys,
- GFP_KERNEL);
+ phba->slim2p.virt = dma_zalloc_coherent(&pdev->dev, SLI2_SLIM_SIZE,
+ &phba->slim2p.phys, GFP_KERNEL);
if (!phba->slim2p.virt)
goto out_iounmap;
- memset(phba->slim2p.virt, 0, SLI2_SLIM_SIZE);
phba->mbox = phba->slim2p.virt + offsetof(struct lpfc_sli2_slim, mbx);
phba->mbox_ext = (phba->slim2p.virt +
offsetof(struct lpfc_sli2_slim, mbx_ext_words));
@@ -6618,15 +6630,12 @@ lpfc_create_bootstrap_mbox(struct lpfc_hba *phba)
* plus an alignment restriction of 16 bytes.
*/
bmbx_size = sizeof(struct lpfc_bmbx_create) + (LPFC_ALIGN_16_BYTE - 1);
- dmabuf->virt = dma_alloc_coherent(&phba->pcidev->dev,
- bmbx_size,
- &dmabuf->phys,
- GFP_KERNEL);
+ dmabuf->virt = dma_zalloc_coherent(&phba->pcidev->dev, bmbx_size,
+ &dmabuf->phys, GFP_KERNEL);
if (!dmabuf->virt) {
kfree(dmabuf);
return -ENOMEM;
}
- memset(dmabuf->virt, 0, bmbx_size);
/*
* Initialize the bootstrap mailbox pointers now so that the register
@@ -6710,7 +6719,6 @@ lpfc_sli4_read_config(struct lpfc_hba *phba)
struct lpfc_mbx_get_func_cfg *get_func_cfg;
struct lpfc_rsrc_desc_fcfcoe *desc;
char *pdesc_0;
- uint32_t desc_count;
int length, i, rc = 0, rc2;
pmb = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
@@ -6841,7 +6849,6 @@ lpfc_sli4_read_config(struct lpfc_hba *phba)
/* search for fc_fcoe resrouce descriptor */
get_func_cfg = &pmb->u.mqe.un.get_func_cfg;
- desc_count = get_func_cfg->func_cfg.rsrc_desc_count;
pdesc_0 = (char *)&get_func_cfg->func_cfg.desc[0];
desc = (struct lpfc_rsrc_desc_fcfcoe *)pdesc_0;
@@ -7417,7 +7424,8 @@ lpfc_sli4_queue_setup(struct lpfc_hba *phba)
if (rc) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0523 Failed setup of fast-path EQ "
- "(%d), rc = 0x%x\n", fcp_eqidx, rc);
+ "(%d), rc = 0x%x\n", fcp_eqidx,
+ (uint32_t)rc);
goto out_destroy_hba_eq;
}
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
@@ -7448,7 +7456,8 @@ lpfc_sli4_queue_setup(struct lpfc_hba *phba)
if (rc) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0527 Failed setup of fast-path FCP "
- "CQ (%d), rc = 0x%x\n", fcp_cqidx, rc);
+ "CQ (%d), rc = 0x%x\n", fcp_cqidx,
+ (uint32_t)rc);
goto out_destroy_fcp_cq;
}
@@ -7488,7 +7497,8 @@ lpfc_sli4_queue_setup(struct lpfc_hba *phba)
if (rc) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0535 Failed setup of fast-path FCP "
- "WQ (%d), rc = 0x%x\n", fcp_wqidx, rc);
+ "WQ (%d), rc = 0x%x\n", fcp_wqidx,
+ (uint32_t)rc);
goto out_destroy_fcp_wq;
}
@@ -7521,7 +7531,7 @@ lpfc_sli4_queue_setup(struct lpfc_hba *phba)
if (rc) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0529 Failed setup of slow-path mailbox CQ: "
- "rc = 0x%x\n", rc);
+ "rc = 0x%x\n", (uint32_t)rc);
goto out_destroy_fcp_wq;
}
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
@@ -7541,7 +7551,7 @@ lpfc_sli4_queue_setup(struct lpfc_hba *phba)
if (rc) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0531 Failed setup of slow-path ELS CQ: "
- "rc = 0x%x\n", rc);
+ "rc = 0x%x\n", (uint32_t)rc);
goto out_destroy_mbx_cq;
}
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
@@ -7585,7 +7595,7 @@ lpfc_sli4_queue_setup(struct lpfc_hba *phba)
if (rc) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0537 Failed setup of slow-path ELS WQ: "
- "rc = 0x%x\n", rc);
+ "rc = 0x%x\n", (uint32_t)rc);
goto out_destroy_mbx_wq;
}
@@ -7617,7 +7627,7 @@ lpfc_sli4_queue_setup(struct lpfc_hba *phba)
if (rc) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0541 Failed setup of Receive Queue: "
- "rc = 0x%x\n", rc);
+ "rc = 0x%x\n", (uint32_t)rc);
goto out_destroy_fcp_wq;
}
@@ -7896,7 +7906,8 @@ lpfc_pci_function_reset(struct lpfc_hba *phba)
LPFC_MBOXQ_t *mboxq;
uint32_t rc = 0, if_type;
uint32_t shdr_status, shdr_add_status;
- uint32_t rdy_chk, num_resets = 0, reset_again = 0;
+ uint32_t rdy_chk;
+ uint32_t port_reset = 0;
union lpfc_sli4_cfg_shdr *shdr;
struct lpfc_register reg_data;
uint16_t devid;
@@ -7936,9 +7947,42 @@ lpfc_pci_function_reset(struct lpfc_hba *phba)
}
break;
case LPFC_SLI_INTF_IF_TYPE_2:
- for (num_resets = 0;
- num_resets < MAX_IF_TYPE_2_RESETS;
- num_resets++) {
+wait:
+ /*
+ * Poll the Port Status Register and wait for RDY for
+ * up to 30 seconds. If the port doesn't respond, treat
+ * it as an error.
+ */
+ for (rdy_chk = 0; rdy_chk < 3000; rdy_chk++) {
+ if (lpfc_readl(phba->sli4_hba.u.if_type2.
+ STATUSregaddr, &reg_data.word0)) {
+ rc = -ENODEV;
+ goto out;
+ }
+ if (bf_get(lpfc_sliport_status_rdy, &reg_data))
+ break;
+ msleep(20);
+ }
+
+ if (!bf_get(lpfc_sliport_status_rdy, &reg_data)) {
+ phba->work_status[0] = readl(
+ phba->sli4_hba.u.if_type2.ERR1regaddr);
+ phba->work_status[1] = readl(
+ phba->sli4_hba.u.if_type2.ERR2regaddr);
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2890 Port not ready, port status reg "
+ "0x%x error 1=0x%x, error 2=0x%x\n",
+ reg_data.word0,
+ phba->work_status[0],
+ phba->work_status[1]);
+ rc = -ENODEV;
+ goto out;
+ }
+
+ if (!port_reset) {
+ /*
+ * Reset the port now
+ */
reg_data.word0 = 0;
bf_set(lpfc_sliport_ctrl_end, &reg_data,
LPFC_SLIPORT_LITTLE_ENDIAN);
@@ -7949,64 +7993,16 @@ lpfc_pci_function_reset(struct lpfc_hba *phba)
/* flush */
pci_read_config_word(phba->pcidev,
PCI_DEVICE_ID, &devid);
- /*
- * Poll the Port Status Register and wait for RDY for
- * up to 10 seconds. If the port doesn't respond, treat
- * it as an error. If the port responds with RN, start
- * the loop again.
- */
- for (rdy_chk = 0; rdy_chk < 1000; rdy_chk++) {
- msleep(10);
- if (lpfc_readl(phba->sli4_hba.u.if_type2.
- STATUSregaddr, &reg_data.word0)) {
- rc = -ENODEV;
- goto out;
- }
- if (bf_get(lpfc_sliport_status_rn, &reg_data))
- reset_again++;
- if (bf_get(lpfc_sliport_status_rdy, &reg_data))
- break;
- }
-
- /*
- * If the port responds to the init request with
- * reset needed, delay for a bit and restart the loop.
- */
- if (reset_again && (rdy_chk < 1000)) {
- msleep(10);
- reset_again = 0;
- continue;
- }
- /* Detect any port errors. */
- if ((bf_get(lpfc_sliport_status_err, &reg_data)) ||
- (rdy_chk >= 1000)) {
- phba->work_status[0] = readl(
- phba->sli4_hba.u.if_type2.ERR1regaddr);
- phba->work_status[1] = readl(
- phba->sli4_hba.u.if_type2.ERR2regaddr);
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "2890 Port error detected during port "
- "reset(%d): wait_tmo:%d ms, "
- "port status reg 0x%x, "
- "error 1=0x%x, error 2=0x%x\n",
- num_resets, rdy_chk*10,
- reg_data.word0,
- phba->work_status[0],
- phba->work_status[1]);
- rc = -ENODEV;
- }
-
- /*
- * Terminate the outer loop provided the Port indicated
- * ready within 10 seconds.
- */
- if (rdy_chk < 1000)
- break;
+ port_reset = 1;
+ msleep(20);
+ goto wait;
+ } else if (bf_get(lpfc_sliport_status_rn, &reg_data)) {
+ rc = -ENODEV;
+ goto out;
}
- /* delay driver action following IF_TYPE_2 function reset */
- msleep(100);
break;
+
case LPFC_SLI_INTF_IF_TYPE_1:
default:
break;
@@ -8014,11 +8010,10 @@ lpfc_pci_function_reset(struct lpfc_hba *phba)
out:
/* Catch the not-ready port failure after a port reset. */
- if (num_resets >= MAX_IF_TYPE_2_RESETS) {
+ if (rc) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"3317 HBA not functional: IP Reset Failed "
- "after (%d) retries, try: "
- "echo fw_reset > board_mode\n", num_resets);
+ "try: echo fw_reset > board_mode\n");
rc = -ENODEV;
}
@@ -8211,9 +8206,9 @@ lpfc_sli4_pci_mem_unset(struct lpfc_hba *phba)
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to enable the MSI-X interrupt vectors to device
- * with SLI-3 interface specs. The kernel function pci_enable_msix() is
- * called to enable the MSI-X vectors. Note that pci_enable_msix(), once
- * invoked, enables either all or nothing, depending on the current
+ * with SLI-3 interface specs. The kernel function pci_enable_msix_exact()
+ * is called to enable the MSI-X vectors. Note that pci_enable_msix_exact(),
+ * once invoked, enables either all or nothing, depending on the current
* availability of PCI vector resources. The device driver is responsible
* for calling the individual request_irq() to register each MSI-X vector
* with a interrupt handler, which is done in this function. Note that
@@ -8237,8 +8232,8 @@ lpfc_sli_enable_msix(struct lpfc_hba *phba)
phba->msix_entries[i].entry = i;
/* Configure MSI-X capability structure */
- rc = pci_enable_msix(phba->pcidev, phba->msix_entries,
- ARRAY_SIZE(phba->msix_entries));
+ rc = pci_enable_msix_exact(phba->pcidev, phba->msix_entries,
+ LPFC_MSIX_VECTORS);
if (rc) {
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"0420 PCI enable MSI-X failed (%d)\n", rc);
@@ -8775,16 +8770,14 @@ out:
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to enable the MSI-X interrupt vectors to device
- * with SLI-4 interface spec. The kernel function pci_enable_msix() is called
- * to enable the MSI-X vectors. Note that pci_enable_msix(), once invoked,
- * enables either all or nothing, depending on the current availability of
- * PCI vector resources. The device driver is responsible for calling the
- * individual request_irq() to register each MSI-X vector with a interrupt
- * handler, which is done in this function. Note that later when device is
- * unloading, the driver should always call free_irq() on all MSI-X vectors
- * it has done request_irq() on before calling pci_disable_msix(). Failure
- * to do so results in a BUG_ON() and a device will be left with MSI-X
- * enabled and leaks its vectors.
+ * with SLI-4 interface spec. The kernel function pci_enable_msix_range()
+ * is called to enable the MSI-X vectors. The device driver is responsible
+ * for calling the individual request_irq() to register each MSI-X vector
+ * with a interrupt handler, which is done in this function. Note that
+ * later when device is unloading, the driver should always call free_irq()
+ * on all MSI-X vectors it has done request_irq() on before calling
+ * pci_disable_msix(). Failure to do so results in a BUG_ON() and a device
+ * will be left with MSI-X enabled and leaks its vectors.
*
* Return codes
* 0 - successful
@@ -8805,17 +8798,14 @@ lpfc_sli4_enable_msix(struct lpfc_hba *phba)
phba->sli4_hba.msix_entries[index].entry = index;
vectors++;
}
-enable_msix_vectors:
- rc = pci_enable_msix(phba->pcidev, phba->sli4_hba.msix_entries,
- vectors);
- if (rc > 1) {
- vectors = rc;
- goto enable_msix_vectors;
- } else if (rc) {
+ rc = pci_enable_msix_range(phba->pcidev, phba->sli4_hba.msix_entries,
+ 2, vectors);
+ if (rc < 0) {
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"0484 PCI enable MSI-X failed (%d)\n", rc);
goto vec_fail_out;
}
+ vectors = rc;
/* Log MSI-X vector assignment */
for (index = 0; index < vectors; index++)
@@ -8828,7 +8818,8 @@ enable_msix_vectors:
/* Assign MSI-X vectors to interrupt handlers */
for (index = 0; index < vectors; index++) {
memset(&phba->sli4_hba.handler_name[index], 0, 16);
- sprintf((char *)&phba->sli4_hba.handler_name[index],
+ snprintf((char *)&phba->sli4_hba.handler_name[index],
+ LPFC_SLI4_HANDLER_NAME_SZ,
LPFC_DRIVER_HANDLER_NAME"%d", index);
phba->sli4_hba.fcp_eq_hdl[index].idx = index;
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-29 05:41:30 +0000