diff options
Diffstat (limited to 'drivers/staging/iio')
32 files changed, 576 insertions, 4521 deletions
diff --git a/drivers/staging/iio/Documentation/light/sysfs-bus-iio-light-tsl2583 b/drivers/staging/iio/Documentation/light/sysfs-bus-iio-light-tsl2583 deleted file mode 100644 index 470f7ad9c073..000000000000 --- a/drivers/staging/iio/Documentation/light/sysfs-bus-iio-light-tsl2583 +++ /dev/null @@ -1,6 +0,0 @@ -What: /sys/bus/iio/devices/device[n]/in_illuminance0_calibrate -KernelVersion: 2.6.37 -Contact: linux-iio@vger.kernel.org -Description: - This property causes an internal calibration of the als gain trim - value which is later used in calculating illuminance in lux. diff --git a/drivers/staging/iio/Documentation/sysfs-bus-iio-light-tsl2583 b/drivers/staging/iio/Documentation/sysfs-bus-iio-light-tsl2583 deleted file mode 100644 index 660781df409f..000000000000 --- a/drivers/staging/iio/Documentation/sysfs-bus-iio-light-tsl2583 +++ /dev/null @@ -1,20 +0,0 @@ -What: /sys/bus/iio/devices/device[n]/lux_table -KernelVersion: 2.6.37 -Contact: linux-iio@vger.kernel.org -Description: - This property gets/sets the table of coefficients - used in calculating illuminance in lux. - -What: /sys/bus/iio/devices/device[n]/illuminance0_calibrate -KernelVersion: 2.6.37 -Contact: linux-iio@vger.kernel.org -Description: - This property causes an internal calibration of the als gain trim - value which is later used in calculating illuminance in lux. - -What: /sys/bus/iio/devices/device[n]/illuminance0_input_target -KernelVersion: 2.6.37 -Contact: linux-iio@vger.kernel.org -Description: - This property is the known externally illuminance (in lux). - It is used in the process of calibrating the device accuracy. diff --git a/drivers/staging/iio/TODO b/drivers/staging/iio/TODO index 93a896883e37..4922402e2e98 100644 --- a/drivers/staging/iio/TODO +++ b/drivers/staging/iio/TODO @@ -1,76 +1,8 @@ -2009 8/18 - -Core: -1) Get reviews -2) Additional testing -3) Ensure all desirable features present by adding more devices. - Major changes not expected except in response to comments - -Max1363 core: -1) Possibly add sysfs exports of constant useful to userspace. -Would be nice -2) Support hardware generated interrupts -3) Expand device set. Lots of other maxim adc's have very - similar interfaces. - -MXS LRADC driver: -This is a classic MFD device as it combines the following subdevices - - touchscreen controller (input subsystem related device) - - general purpose ADC channels - - battery voltage monitor (power subsystem related device) - - die temperature monitor (thermal management) - -At least the battery voltage and die temperature feature is required in-kernel -by a driver of the SoC's battery charging unit to avoid any damage to the -silicon and the battery. - -TSL2561 -Would be nice -1) Open question of userspace vs kernel space balance when -converting to useful light measurements from device ones. -2) Add sysfs elements necessary to allow device agnostic -unit conversion. - -LIS3L02DQ core - -LIS3L02DQ ring - -KXSD9 -Currently minimal driver, would be nice to add: -1) Support for all chip generated interrupts (events), -basically get support up to level of lis3l02dq driver. - -Ring buffer core - -SCA3000 -Would be nice -1) Testing on devices other than sca3000-e05 - -Trigger core support -1) Discussion of approach. Is it general enough? - -Ring Buffer: -1) Discussion of approach. -There are probably better ways of doing this. The -intention is to allow for more than one software ring -buffer implementation as different users will have -different requirements. This one suits mid range -frequencies (100Hz - 4kHz). -2) Lots of testing - -GPIO trigger -1) Add control over the type of interrupt etc. This will -necessitate a header that is also visible from arch board -files. (avoided at the moment to keep the driver set -contained in staging). +2016 10/09 ADI Drivers: CC the device-drivers-devel@blackfin.uclinux.org mailing list when e-mailing the normal IIO list (see below). -Documentation -1) Lots of cleanup and expansion. -2) Some device require individual docs. - Contact: Jonathan Cameron <jic23@kernel.org>. Mailing list: linux-iio@vger.kernel.org diff --git a/drivers/staging/iio/accel/Kconfig b/drivers/staging/iio/accel/Kconfig index 1c994b57c7d2..c6b0f5eae7ab 100644 --- a/drivers/staging/iio/accel/Kconfig +++ b/drivers/staging/iio/accel/Kconfig @@ -51,14 +51,4 @@ config ADIS16240 To compile this driver as a module, say M here: the module will be called adis16240. -config SCA3000 - depends on IIO_BUFFER - depends on SPI - tristate "VTI SCA3000 series accelerometers" - help - Say Y here to build support for the VTI SCA3000 series of SPI - accelerometers. These devices use a hardware ring buffer. - - To compile this driver as a module, say M here: the module will be - called sca3000. endmenu diff --git a/drivers/staging/iio/accel/Makefile b/drivers/staging/iio/accel/Makefile index 1810a434a755..febb137b60c4 100644 --- a/drivers/staging/iio/accel/Makefile +++ b/drivers/staging/iio/accel/Makefile @@ -13,6 +13,3 @@ obj-$(CONFIG_ADIS16209) += adis16209.o adis16240-y := adis16240_core.o obj-$(CONFIG_ADIS16240) += adis16240.o - -sca3000-y := sca3000_core.o sca3000_ring.o -obj-$(CONFIG_SCA3000) += sca3000.o diff --git a/drivers/staging/iio/accel/sca3000.h b/drivers/staging/iio/accel/sca3000.h deleted file mode 100644 index 4dcc8575cbe3..000000000000 --- a/drivers/staging/iio/accel/sca3000.h +++ /dev/null @@ -1,279 +0,0 @@ -/* - * sca3000.c -- support VTI sca3000 series accelerometers - * via SPI - * - * Copyright (c) 2007 Jonathan Cameron <jic23@kernel.org> - * - * Partly based upon tle62x0.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Initial mode is direct measurement. - * - * Untested things - * - * Temperature reading (the e05 I'm testing with doesn't have a sensor) - * - * Free fall detection mode - supported but untested as I'm not droping my - * dubious wire rig far enough to test it. - * - * Unsupported as yet - * - * Time stamping of data from ring. Various ideas on how to do this but none - * are remotely simple. Suggestions welcome. - * - * Individual enabling disabling of channels going into ring buffer - * - * Overflow handling (this is signaled for all but 8 bit ring buffer mode.) - * - * Motion detector using AND combinations of signals. - * - * Note: Be very careful about not touching an register bytes marked - * as reserved on the data sheet. They really mean it as changing convents of - * some will cause the device to lock up. - * - * Known issues - on rare occasions the interrupts lock up. Not sure why as yet. - * Can probably alleviate this by reading the interrupt register on start, but - * that is really just brushing the problem under the carpet. - */ -#ifndef _SCA3000 -#define _SCA3000 - -#define SCA3000_WRITE_REG(a) (((a) << 2) | 0x02) -#define SCA3000_READ_REG(a) ((a) << 2) - -#define SCA3000_REG_ADDR_REVID 0x00 -#define SCA3000_REVID_MAJOR_MASK 0xf0 -#define SCA3000_REVID_MINOR_MASK 0x0f - -#define SCA3000_REG_ADDR_STATUS 0x02 -#define SCA3000_LOCKED 0x20 -#define SCA3000_EEPROM_CS_ERROR 0x02 -#define SCA3000_SPI_FRAME_ERROR 0x01 - -/* All reads done using register decrement so no need to directly access LSBs */ -#define SCA3000_REG_ADDR_X_MSB 0x05 -#define SCA3000_REG_ADDR_Y_MSB 0x07 -#define SCA3000_REG_ADDR_Z_MSB 0x09 - -#define SCA3000_REG_ADDR_RING_OUT 0x0f - -/* Temp read untested - the e05 doesn't have the sensor */ -#define SCA3000_REG_ADDR_TEMP_MSB 0x13 - -#define SCA3000_REG_ADDR_MODE 0x14 -#define SCA3000_MODE_PROT_MASK 0x28 - -#define SCA3000_RING_BUF_ENABLE 0x80 -#define SCA3000_RING_BUF_8BIT 0x40 -/* - * Free fall detection triggers an interrupt if the acceleration - * is below a threshold for equivalent of 25cm drop - */ -#define SCA3000_FREE_FALL_DETECT 0x10 -#define SCA3000_MEAS_MODE_NORMAL 0x00 -#define SCA3000_MEAS_MODE_OP_1 0x01 -#define SCA3000_MEAS_MODE_OP_2 0x02 - -/* - * In motion detection mode the accelerations are band pass filtered - * (approx 1 - 25Hz) and then a programmable threshold used to trigger - * and interrupt. - */ -#define SCA3000_MEAS_MODE_MOT_DET 0x03 - -#define SCA3000_REG_ADDR_BUF_COUNT 0x15 - -#define SCA3000_REG_ADDR_INT_STATUS 0x16 - -#define SCA3000_INT_STATUS_THREE_QUARTERS 0x80 -#define SCA3000_INT_STATUS_HALF 0x40 - -#define SCA3000_INT_STATUS_FREE_FALL 0x08 -#define SCA3000_INT_STATUS_Y_TRIGGER 0x04 -#define SCA3000_INT_STATUS_X_TRIGGER 0x02 -#define SCA3000_INT_STATUS_Z_TRIGGER 0x01 - -/* Used to allow access to multiplexed registers */ -#define SCA3000_REG_ADDR_CTRL_SEL 0x18 -/* Only available for SCA3000-D03 and SCA3000-D01 */ -#define SCA3000_REG_CTRL_SEL_I2C_DISABLE 0x01 -#define SCA3000_REG_CTRL_SEL_MD_CTRL 0x02 -#define SCA3000_REG_CTRL_SEL_MD_Y_TH 0x03 -#define SCA3000_REG_CTRL_SEL_MD_X_TH 0x04 -#define SCA3000_REG_CTRL_SEL_MD_Z_TH 0x05 -/* - * BE VERY CAREFUL WITH THIS, IF 3 BITS ARE NOT SET the device - * will not function - */ -#define SCA3000_REG_CTRL_SEL_OUT_CTRL 0x0B -#define SCA3000_OUT_CTRL_PROT_MASK 0xE0 -#define SCA3000_OUT_CTRL_BUF_X_EN 0x10 -#define SCA3000_OUT_CTRL_BUF_Y_EN 0x08 -#define SCA3000_OUT_CTRL_BUF_Z_EN 0x04 -#define SCA3000_OUT_CTRL_BUF_DIV_MASK 0x03 -#define SCA3000_OUT_CTRL_BUF_DIV_4 0x02 -#define SCA3000_OUT_CTRL_BUF_DIV_2 0x01 - -/* - * Control which motion detector interrupts are on. - * For now only OR combinations are supported. - */ -#define SCA3000_MD_CTRL_PROT_MASK 0xC0 -#define SCA3000_MD_CTRL_OR_Y 0x01 -#define SCA3000_MD_CTRL_OR_X 0x02 -#define SCA3000_MD_CTRL_OR_Z 0x04 -/* Currently unsupported */ -#define SCA3000_MD_CTRL_AND_Y 0x08 -#define SCA3000_MD_CTRL_AND_X 0x10 -#define SAC3000_MD_CTRL_AND_Z 0x20 - -/* - * Some control registers of complex access methods requiring this register to - * be used to remove a lock. - */ -#define SCA3000_REG_ADDR_UNLOCK 0x1e - -#define SCA3000_REG_ADDR_INT_MASK 0x21 -#define SCA3000_INT_MASK_PROT_MASK 0x1C - -#define SCA3000_INT_MASK_RING_THREE_QUARTER 0x80 -#define SCA3000_INT_MASK_RING_HALF 0x40 - -#define SCA3000_INT_MASK_ALL_INTS 0x02 -#define SCA3000_INT_MASK_ACTIVE_HIGH 0x01 -#define SCA3000_INT_MASK_ACTIVE_LOW 0x00 - -/* Values of multiplexed registers (write to ctrl_data after select) */ -#define SCA3000_REG_ADDR_CTRL_DATA 0x22 - -/* - * Measurement modes available on some sca3000 series chips. Code assumes others - * may become available in the future. - * - * Bypass - Bypass the low-pass filter in the signal channel so as to increase - * signal bandwidth. - * - * Narrow - Narrow low-pass filtering of the signal channel and half output - * data rate by decimation. - * - * Wide - Widen low-pass filtering of signal channel to increase bandwidth - */ -#define SCA3000_OP_MODE_BYPASS 0x01 -#define SCA3000_OP_MODE_NARROW 0x02 -#define SCA3000_OP_MODE_WIDE 0x04 -#define SCA3000_MAX_TX 6 -#define SCA3000_MAX_RX 2 - -/** - * struct sca3000_state - device instance state information - * @us: the associated spi device - * @info: chip variant information - * @interrupt_handler_ws: event interrupt handler for all events - * @last_timestamp: the timestamp of the last event - * @mo_det_use_count: reference counter for the motion detection unit - * @lock: lock used to protect elements of sca3000_state - * and the underlying device state. - * @bpse: number of bits per scan element - * @tx: dma-able transmit buffer - * @rx: dma-able receive buffer - **/ -struct sca3000_state { - struct spi_device *us; - const struct sca3000_chip_info *info; - struct work_struct interrupt_handler_ws; - s64 last_timestamp; - int mo_det_use_count; - struct mutex lock; - int bpse; - /* Can these share a cacheline ? */ - u8 rx[2] ____cacheline_aligned; - u8 tx[6] ____cacheline_aligned; -}; - -/** - * struct sca3000_chip_info - model dependent parameters - * @scale: scale * 10^-6 - * @temp_output: some devices have temperature sensors. - * @measurement_mode_freq: normal mode sampling frequency - * @option_mode_1: first optional mode. Not all models have one - * @option_mode_1_freq: option mode 1 sampling frequency - * @option_mode_2: second optional mode. Not all chips have one - * @option_mode_2_freq: option mode 2 sampling frequency - * - * This structure is used to hold information about the functionality of a given - * sca3000 variant. - **/ -struct sca3000_chip_info { - unsigned int scale; - bool temp_output; - int measurement_mode_freq; - int option_mode_1; - int option_mode_1_freq; - int option_mode_2; - int option_mode_2_freq; - int mot_det_mult_xz[6]; - int mot_det_mult_y[7]; -}; - -int sca3000_read_data_short(struct sca3000_state *st, - u8 reg_address_high, - int len); - -/** - * sca3000_write_reg() write a single register - * @address: address of register on chip - * @val: value to be written to register - * - * The main lock must be held. - **/ -int sca3000_write_reg(struct sca3000_state *st, u8 address, u8 val); - -#ifdef CONFIG_IIO_BUFFER -/** - * sca3000_register_ring_funcs() setup the ring state change functions - **/ -void sca3000_register_ring_funcs(struct iio_dev *indio_dev); - -/** - * sca3000_configure_ring() - allocate and configure ring buffer - * @indio_dev: iio-core device whose ring is to be configured - * - * The hardware ring buffer needs far fewer ring buffer functions than - * a software one as a lot of things are handled automatically. - * This function also tells the iio core that our device supports a - * hardware ring buffer mode. - **/ -int sca3000_configure_ring(struct iio_dev *indio_dev); - -/** - * sca3000_unconfigure_ring() - deallocate the ring buffer - * @indio_dev: iio-core device whose ring we are freeing - **/ -void sca3000_unconfigure_ring(struct iio_dev *indio_dev); - -/** - * sca3000_ring_int_process() handles ring related event pushing and escalation - * @val: the event code - **/ -void sca3000_ring_int_process(u8 val, struct iio_buffer *ring); - -#else -static inline void sca3000_register_ring_funcs(struct iio_dev *indio_dev) -{ -} - -static inline -int sca3000_register_ring_access_and_init(struct iio_dev *indio_dev) -{ - return 0; -} - -static inline void sca3000_ring_int_process(u8 val, void *ring) -{ -} - -#endif -#endif /* _SCA3000 */ diff --git a/drivers/staging/iio/accel/sca3000_core.c b/drivers/staging/iio/accel/sca3000_core.c deleted file mode 100644 index 564b36d4f648..000000000000 --- a/drivers/staging/iio/accel/sca3000_core.c +++ /dev/null @@ -1,1210 +0,0 @@ -/* - * sca3000_core.c -- support VTI sca3000 series accelerometers via SPI - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - * - * Copyright (c) 2009 Jonathan Cameron <jic23@kernel.org> - * - * See industrialio/accels/sca3000.h for comments. - */ - -#include <linux/interrupt.h> -#include <linux/fs.h> -#include <linux/device.h> -#include <linux/slab.h> -#include <linux/kernel.h> -#include <linux/spi/spi.h> -#include <linux/sysfs.h> -#include <linux/module.h> -#include <linux/iio/iio.h> -#include <linux/iio/sysfs.h> -#include <linux/iio/events.h> -#include <linux/iio/buffer.h> - -#include "sca3000.h" - -enum sca3000_variant { - d01, - e02, - e04, - e05, -}; - -/* - * Note where option modes are not defined, the chip simply does not - * support any. - * Other chips in the sca3000 series use i2c and are not included here. - * - * Some of these devices are only listed in the family data sheet and - * do not actually appear to be available. - */ -static const struct sca3000_chip_info sca3000_spi_chip_info_tbl[] = { - [d01] = { - .scale = 7357, - .temp_output = true, - .measurement_mode_freq = 250, - .option_mode_1 = SCA3000_OP_MODE_BYPASS, - .option_mode_1_freq = 250, - .mot_det_mult_xz = {50, 100, 200, 350, 650, 1300}, - .mot_det_mult_y = {50, 100, 150, 250, 450, 850, 1750}, - }, - [e02] = { - .scale = 9810, - .measurement_mode_freq = 125, - .option_mode_1 = SCA3000_OP_MODE_NARROW, - .option_mode_1_freq = 63, - .mot_det_mult_xz = {100, 150, 300, 550, 1050, 2050}, - .mot_det_mult_y = {50, 100, 200, 350, 700, 1350, 2700}, - }, - [e04] = { - .scale = 19620, - .measurement_mode_freq = 100, - .option_mode_1 = SCA3000_OP_MODE_NARROW, - .option_mode_1_freq = 50, - .option_mode_2 = SCA3000_OP_MODE_WIDE, - .option_mode_2_freq = 400, - .mot_det_mult_xz = {200, 300, 600, 1100, 2100, 4100}, - .mot_det_mult_y = {100, 200, 400, 7000, 1400, 2700, 54000}, - }, - [e05] = { - .scale = 61313, - .measurement_mode_freq = 200, - .option_mode_1 = SCA3000_OP_MODE_NARROW, - .option_mode_1_freq = 50, - .option_mode_2 = SCA3000_OP_MODE_WIDE, - .option_mode_2_freq = 400, - .mot_det_mult_xz = {600, 900, 1700, 3200, 6100, 11900}, - .mot_det_mult_y = {300, 600, 1200, 2000, 4100, 7800, 15600}, - }, -}; - -int sca3000_write_reg(struct sca3000_state *st, u8 address, u8 val) -{ - st->tx[0] = SCA3000_WRITE_REG(address); - st->tx[1] = val; - return spi_write(st->us, st->tx, 2); -} - -int sca3000_read_data_short(struct sca3000_state *st, - u8 reg_address_high, - int len) -{ - struct spi_transfer xfer[2] = { - { - .len = 1, - .tx_buf = st->tx, - }, { - .len = len, - .rx_buf = st->rx, - } - }; - st->tx[0] = SCA3000_READ_REG(reg_address_high); - - return spi_sync_transfer(st->us, xfer, ARRAY_SIZE(xfer)); -} - -/** - * sca3000_reg_lock_on() test if the ctrl register lock is on - * - * Lock must be held. - **/ -static int sca3000_reg_lock_on(struct sca3000_state *st) -{ - int ret; - - ret = sca3000_read_data_short(st, SCA3000_REG_ADDR_STATUS, 1); - if (ret < 0) - return ret; - - return !(st->rx[0] & SCA3000_LOCKED); -} - -/** - * __sca3000_unlock_reg_lock() unlock the control registers - * - * Note the device does not appear to support doing this in a single transfer. - * This should only ever be used as part of ctrl reg read. - * Lock must be held before calling this - **/ -static int __sca3000_unlock_reg_lock(struct sca3000_state *st) -{ - struct spi_transfer xfer[3] = { - { - .len = 2, - .cs_change = 1, - .tx_buf = st->tx, - }, { - .len = 2, - .cs_change = 1, - .tx_buf = st->tx + 2, - }, { - .len = 2, - .tx_buf = st->tx + 4, - }, - }; - st->tx[0] = SCA3000_WRITE_REG(SCA3000_REG_ADDR_UNLOCK); - st->tx[1] = 0x00; - st->tx[2] = SCA3000_WRITE_REG(SCA3000_REG_ADDR_UNLOCK); - st->tx[3] = 0x50; - st->tx[4] = SCA3000_WRITE_REG(SCA3000_REG_ADDR_UNLOCK); - st->tx[5] = 0xA0; - - return spi_sync_transfer(st->us, xfer, ARRAY_SIZE(xfer)); -} - -/** - * sca3000_write_ctrl_reg() write to a lock protect ctrl register - * @sel: selects which registers we wish to write to - * @val: the value to be written - * - * Certain control registers are protected against overwriting by the lock - * register and use a shared write address. This function allows writing of - * these registers. - * Lock must be held. - **/ -static int sca3000_write_ctrl_reg(struct sca3000_state *st, - u8 sel, - uint8_t val) -{ - int ret; - - ret = sca3000_reg_lock_on(st); - if (ret < 0) - goto error_ret; - if (ret) { - ret = __sca3000_unlock_reg_lock(st); - if (ret) - goto error_ret; - } - - /* Set the control select register */ - ret = sca3000_write_reg(st, SCA3000_REG_ADDR_CTRL_SEL, sel); - if (ret) - goto error_ret; - - /* Write the actual value into the register */ - ret = sca3000_write_reg(st, SCA3000_REG_ADDR_CTRL_DATA, val); - -error_ret: - return ret; -} - -/** - * sca3000_read_ctrl_reg() read from lock protected control register. - * - * Lock must be held. - **/ -static int sca3000_read_ctrl_reg(struct sca3000_state *st, - u8 ctrl_reg) -{ - int ret; - - ret = sca3000_reg_lock_on(st); - if (ret < 0) - goto error_ret; - if (ret) { - ret = __sca3000_unlock_reg_lock(st); - if (ret) - goto error_ret; - } - /* Set the control select register */ - ret = sca3000_write_reg(st, SCA3000_REG_ADDR_CTRL_SEL, ctrl_reg); - if (ret) - goto error_ret; - ret = sca3000_read_data_short(st, SCA3000_REG_ADDR_CTRL_DATA, 1); - if (ret) - goto error_ret; - return st->rx[0]; -error_ret: - return ret; -} - -/** - * sca3000_show_rev() - sysfs interface to read the chip revision number - **/ -static ssize_t sca3000_show_rev(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - int len = 0, ret; - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct sca3000_state *st = iio_priv(indio_dev); - - mutex_lock(&st->lock); - ret = sca3000_read_data_short(st, SCA3000_REG_ADDR_REVID, 1); - if (ret < 0) - goto error_ret; - len += sprintf(buf + len, - "major=%d, minor=%d\n", - st->rx[0] & SCA3000_REVID_MAJOR_MASK, - st->rx[0] & SCA3000_REVID_MINOR_MASK); -error_ret: - mutex_unlock(&st->lock); - - return ret ? ret : len; -} - -/** - * sca3000_show_available_measurement_modes() display available modes - * - * This is all read from chip specific data in the driver. Not all - * of the sca3000 series support modes other than normal. - **/ -static ssize_t -sca3000_show_available_measurement_modes(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct sca3000_state *st = iio_priv(indio_dev); - int len = 0; - - len += sprintf(buf + len, "0 - normal mode"); - switch (st->info->option_mode_1) { - case SCA3000_OP_MODE_NARROW: - len += sprintf(buf + len, ", 1 - narrow mode"); - break; - case SCA3000_OP_MODE_BYPASS: - len += sprintf(buf + len, ", 1 - bypass mode"); - break; - } - switch (st->info->option_mode_2) { - case SCA3000_OP_MODE_WIDE: - len += sprintf(buf + len, ", 2 - wide mode"); - break; - } - /* always supported */ - len += sprintf(buf + len, " 3 - motion detection\n"); - - return len; -} - -/** - * sca3000_show_measurement_mode() sysfs read of current mode - **/ -static ssize_t -sca3000_show_measurement_mode(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct sca3000_state *st = iio_priv(indio_dev); - int len = 0, ret; - - mutex_lock(&st->lock); - ret = sca3000_read_data_short(st, SCA3000_REG_ADDR_MODE, 1); - if (ret) - goto error_ret; - /* mask bottom 2 bits - only ones that are relevant */ - st->rx[0] &= 0x03; - switch (st->rx[0]) { - case SCA3000_MEAS_MODE_NORMAL: - len += sprintf(buf + len, "0 - normal mode\n"); - break; - case SCA3000_MEAS_MODE_MOT_DET: - len += sprintf(buf + len, "3 - motion detection\n"); - break; - case SCA3000_MEAS_MODE_OP_1: - switch (st->info->option_mode_1) { - case SCA3000_OP_MODE_NARROW: - len += sprintf(buf + len, "1 - narrow mode\n"); - break; - case SCA3000_OP_MODE_BYPASS: - len += sprintf(buf + len, "1 - bypass mode\n"); - break; - } - break; - case SCA3000_MEAS_MODE_OP_2: - switch (st->info->option_mode_2) { - case SCA3000_OP_MODE_WIDE: - len += sprintf(buf + len, "2 - wide mode\n"); - break; - } - break; - } - -error_ret: - mutex_unlock(&st->lock); - - return ret ? ret : len; -} - -/** - * sca3000_store_measurement_mode() set the current mode - **/ -static ssize_t -sca3000_store_measurement_mode(struct device *dev, - struct device_attribute *attr, - const char *buf, - size_t len) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct sca3000_state *st = iio_priv(indio_dev); - int ret; - u8 mask = 0x03; - u8 val; - - mutex_lock(&st->lock); - ret = kstrtou8(buf, 10, &val); - if (ret) - goto error_ret; - if (val > 3) { - ret = -EINVAL; - goto error_ret; - } - ret = sca3000_read_data_short(st, SCA3000_REG_ADDR_MODE, 1); - if (ret) - goto error_ret; - st->rx[0] &= ~mask; - st->rx[0] |= (val & mask); - ret = sca3000_write_reg(st, SCA3000_REG_ADDR_MODE, st->rx[0]); - if (ret) - goto error_ret; - mutex_unlock(&st->lock); - - return len; - -error_ret: - mutex_unlock(&st->lock); - - return ret; -} - -/* - * Not even vaguely standard attributes so defined here rather than - * in the relevant IIO core headers - */ -static IIO_DEVICE_ATTR(measurement_mode_available, S_IRUGO, - sca3000_show_available_measurement_modes, - NULL, 0); - -static IIO_DEVICE_ATTR(measurement_mode, S_IRUGO | S_IWUSR, - sca3000_show_measurement_mode, - sca3000_store_measurement_mode, - 0); - -/* More standard attributes */ - -static IIO_DEVICE_ATTR(revision, S_IRUGO, sca3000_show_rev, NULL, 0); - -static const struct iio_event_spec sca3000_event = { - .type = IIO_EV_TYPE_MAG, - .dir = IIO_EV_DIR_RISING, - .mask_separate = BIT(IIO_EV_INFO_VALUE) | BIT(IIO_EV_INFO_ENABLE), -}; - -#define SCA3000_CHAN(index, mod) \ - { \ - .type = IIO_ACCEL, \ - .modified = 1, \ - .channel2 = mod, \ - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),\ - .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),\ - .address = index, \ - .scan_index = index, \ - .scan_type = { \ - .sign = 's', \ - .realbits = 11, \ - .storagebits = 16, \ - .shift = 5, \ - }, \ - .event_spec = &sca3000_event, \ - .num_event_specs = 1, \ - } - -static const struct iio_chan_spec sca3000_channels[] = { - SCA3000_CHAN(0, IIO_MOD_X), - SCA3000_CHAN(1, IIO_MOD_Y), - SCA3000_CHAN(2, IIO_MOD_Z), -}; - -static const struct iio_chan_spec sca3000_channels_with_temp[] = { - SCA3000_CHAN(0, IIO_MOD_X), - SCA3000_CHAN(1, IIO_MOD_Y), - SCA3000_CHAN(2, IIO_MOD_Z), - { - .type = IIO_TEMP, - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | - BIT(IIO_CHAN_INFO_OFFSET), - /* No buffer support */ - .scan_index = -1, - }, -}; - -static u8 sca3000_addresses[3][3] = { - [0] = {SCA3000_REG_ADDR_X_MSB, SCA3000_REG_CTRL_SEL_MD_X_TH, - SCA3000_MD_CTRL_OR_X}, - [1] = {SCA3000_REG_ADDR_Y_MSB, SCA3000_REG_CTRL_SEL_MD_Y_TH, - SCA3000_MD_CTRL_OR_Y}, - [2] = {SCA3000_REG_ADDR_Z_MSB, SCA3000_REG_CTRL_SEL_MD_Z_TH, - SCA3000_MD_CTRL_OR_Z}, -}; - -/** - * __sca3000_get_base_freq() obtain mode specific base frequency - * - * lock must be held - **/ -static inline int __sca3000_get_base_freq(struct sca3000_state *st, - const struct sca3000_chip_info *info, - int *base_freq) -{ - int ret; - - ret = sca3000_read_data_short(st, SCA3000_REG_ADDR_MODE, 1); - if (ret) - goto error_ret; - switch (0x03 & st->rx[0]) { - case SCA3000_MEAS_MODE_NORMAL: - *base_freq = info->measurement_mode_freq; - break; - case SCA3000_MEAS_MODE_OP_1: - *base_freq = info->option_mode_1_freq; - break; - case SCA3000_MEAS_MODE_OP_2: - *base_freq = info->option_mode_2_freq; - break; - default: - ret = -EINVAL; - } -error_ret: - return ret; -} - -/** - * read_raw handler for IIO_CHAN_INFO_SAMP_FREQ - * - * lock must be held - **/ -static int read_raw_samp_freq(struct sca3000_state *st, int *val) -{ - int ret; - - ret = __sca3000_get_base_freq(st, st->info, val); - if (ret) - return ret; - - ret = sca3000_read_ctrl_reg(st, SCA3000_REG_CTRL_SEL_OUT_CTRL); - if (ret < 0) - return ret; - - if (*val > 0) { - ret &= SCA3000_OUT_CTRL_BUF_DIV_MASK; - switch (ret) { - case SCA3000_OUT_CTRL_BUF_DIV_2: - *val /= 2; - break; - case SCA3000_OUT_CTRL_BUF_DIV_4: - *val /= 4; - break; - } - } - - return 0; -} - -/** - * write_raw handler for IIO_CHAN_INFO_SAMP_FREQ - * - * lock must be held - **/ -static int write_raw_samp_freq(struct sca3000_state *st, int val) -{ - int ret, base_freq, ctrlval; - - ret = __sca3000_get_base_freq(st, st->info, &base_freq); - if (ret) - return ret; - - ret = sca3000_read_ctrl_reg(st, SCA3000_REG_CTRL_SEL_OUT_CTRL); - if (ret < 0) - return ret; - - ctrlval = ret & ~SCA3000_OUT_CTRL_BUF_DIV_MASK; - - if (val == base_freq / 2) - ctrlval |= SCA3000_OUT_CTRL_BUF_DIV_2; - if (val == base_freq / 4) - ctrlval |= SCA3000_OUT_CTRL_BUF_DIV_4; - else if (val != base_freq) - return -EINVAL; - - return sca3000_write_ctrl_reg(st, SCA3000_REG_CTRL_SEL_OUT_CTRL, - ctrlval); -} - -static int sca3000_read_raw(struct iio_dev *indio_dev, - struct iio_chan_spec const *chan, - int *val, - int *val2, - long mask) -{ - struct sca3000_state *st = iio_priv(indio_dev); - int ret; - u8 address; - - switch (mask) { - case IIO_CHAN_INFO_RAW: - mutex_lock(&st->lock); - if (chan->type == IIO_ACCEL) { - if (st->mo_det_use_count) { - mutex_unlock(&st->lock); - return -EBUSY; - } - address = sca3000_addresses[chan->address][0]; - ret = sca3000_read_data_short(st, address, 2); - if (ret < 0) { - mutex_unlock(&st->lock); - return ret; - } - *val = (be16_to_cpup((__be16 *)st->rx) >> 3) & 0x1FFF; - *val = ((*val) << (sizeof(*val) * 8 - 13)) >> - (sizeof(*val) * 8 - 13); - } else { - /* get the temperature when available */ - ret = sca3000_read_data_short(st, - SCA3000_REG_ADDR_TEMP_MSB, - 2); - if (ret < 0) { - mutex_unlock(&st->lock); - return ret; - } - *val = ((st->rx[0] & 0x3F) << 3) | - ((st->rx[1] & 0xE0) >> 5); - } - mutex_unlock(&st->lock); - return IIO_VAL_INT; - case IIO_CHAN_INFO_SCALE: - *val = 0; - if (chan->type == IIO_ACCEL) - *val2 = st->info->scale; - else /* temperature */ - *val2 = 555556; - return IIO_VAL_INT_PLUS_MICRO; - case IIO_CHAN_INFO_OFFSET: - *val = -214; - *val2 = 600000; - return IIO_VAL_INT_PLUS_MICRO; - case IIO_CHAN_INFO_SAMP_FREQ: - mutex_lock(&st->lock); - ret = read_raw_samp_freq(st, val); - mutex_unlock(&st->lock); - return ret ? ret : IIO_VAL_INT; - default: - return -EINVAL; - } -} - -static int sca3000_write_raw(struct iio_dev *indio_dev, - struct iio_chan_spec const *chan, - int val, int val2, long mask) -{ - struct sca3000_state *st = iio_priv(indio_dev); - int ret; - - switch (mask) { - case IIO_CHAN_INFO_SAMP_FREQ: - if (val2) - return -EINVAL; - mutex_lock(&st->lock); - ret = write_raw_samp_freq(st, val); - mutex_unlock(&st->lock); - return ret; - default: - return -EINVAL; - } - - return ret; -} - -/** - * sca3000_read_av_freq() sysfs function to get available frequencies - * - * The later modes are only relevant to the ring buffer - and depend on current - * mode. Note that data sheet gives rather wide tolerances for these so integer - * division will give good enough answer and not all chips have them specified - * at all. - **/ -static ssize_t sca3000_read_av_freq(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct sca3000_state *st = iio_priv(indio_dev); - int len = 0, ret, val; - - mutex_lock(&st->lock); - ret = sca3000_read_data_short(st, SCA3000_REG_ADDR_MODE, 1); - val = st->rx[0]; - mutex_unlock(&st->lock); - if (ret) - goto error_ret; - - switch (val & 0x03) { - case SCA3000_MEAS_MODE_NORMAL: - len += sprintf(buf + len, "%d %d %d\n", - st->info->measurement_mode_freq, - st->info->measurement_mode_freq / 2, - st->info->measurement_mode_freq / 4); - break; - case SCA3000_MEAS_MODE_OP_1: - len += sprintf(buf + len, "%d %d %d\n", - st->info->option_mode_1_freq, - st->info->option_mode_1_freq / 2, - st->info->option_mode_1_freq / 4); - break; - case SCA3000_MEAS_MODE_OP_2: - len += sprintf(buf + len, "%d %d %d\n", - st->info->option_mode_2_freq, - st->info->option_mode_2_freq / 2, - st->info->option_mode_2_freq / 4); - break; - } - return len; -error_ret: - return ret; -} - -/* - * Should only really be registered if ring buffer support is compiled in. - * Does no harm however and doing it right would add a fair bit of complexity - */ -static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(sca3000_read_av_freq); - -/** - * sca3000_read_thresh() - query of a threshold - **/ -static int sca3000_read_thresh(struct iio_dev *indio_dev, - const struct iio_chan_spec *chan, - enum iio_event_type type, - enum iio_event_direction dir, - enum iio_event_info info, - int *val, int *val2) -{ - int ret, i; - struct sca3000_state *st = iio_priv(indio_dev); - int num = chan->channel2; - - mutex_lock(&st->lock); - ret = sca3000_read_ctrl_reg(st, sca3000_addresses[num][1]); - mutex_unlock(&st->lock); - if (ret < 0) - return ret; - *val = 0; - if (num == 1) - for_each_set_bit(i, (unsigned long *)&ret, - ARRAY_SIZE(st->info->mot_det_mult_y)) - *val += st->info->mot_det_mult_y[i]; - else - for_each_set_bit(i, (unsigned long *)&ret, - ARRAY_SIZE(st->info->mot_det_mult_xz)) - *val += st->info->mot_det_mult_xz[i]; - - return IIO_VAL_INT; -} - -/** - * sca3000_write_thresh() control of threshold - **/ -static int sca3000_write_thresh(struct iio_dev *indio_dev, - const struct iio_chan_spec *chan, - enum iio_event_type type, - enum iio_event_direction dir, - enum iio_event_info info, - int val, int val2) -{ - struct sca3000_state *st = iio_priv(indio_dev); - int num = chan->channel2; - int ret; - int i; - u8 nonlinear = 0; - - if (num == 1) { - i = ARRAY_SIZE(st->info->mot_det_mult_y); - while (i > 0) - if (val >= st->info->mot_det_mult_y[--i]) { - nonlinear |= (1 << i); - val -= st->info->mot_det_mult_y[i]; - } - } else { - i = ARRAY_SIZE(st->info->mot_det_mult_xz); - while (i > 0) - if (val >= st->info->mot_det_mult_xz[--i]) { - nonlinear |= (1 << i); - val -= st->info->mot_det_mult_xz[i]; - } - } - - mutex_lock(&st->lock); - ret = sca3000_write_ctrl_reg(st, sca3000_addresses[num][1], nonlinear); - mutex_unlock(&st->lock); - - return ret; -} - -static struct attribute *sca3000_attributes[] = { - &iio_dev_attr_revision.dev_attr.attr, - &iio_dev_attr_measurement_mode_available.dev_attr.attr, - &iio_dev_attr_measurement_mode.dev_attr.attr, - &iio_dev_attr_sampling_frequency_available.dev_attr.attr, - NULL, -}; - -static const struct attribute_group sca3000_attribute_group = { - .attrs = sca3000_attributes, -}; - -/** - * sca3000_event_handler() - handling ring and non ring events - * - * Ring related interrupt handler. Depending on event, push to - * the ring buffer event chrdev or the event one. - * - * This function is complicated by the fact that the devices can signify ring - * and non ring events via the same interrupt line and they can only - * be distinguished via a read of the relevant status register. - **/ -static irqreturn_t sca3000_event_handler(int irq, void *private) -{ - struct iio_dev *indio_dev = private; - struct sca3000_state *st = iio_priv(indio_dev); - int ret, val; - s64 last_timestamp = iio_get_time_ns(indio_dev); - - /* - * Could lead if badly timed to an extra read of status reg, - * but ensures no interrupt is missed. - */ - mutex_lock(&st->lock); - ret = sca3000_read_data_short(st, SCA3000_REG_ADDR_INT_STATUS, 1); - val = st->rx[0]; - mutex_unlock(&st->lock); - if (ret) - goto done; - - sca3000_ring_int_process(val, indio_dev->buffer); - - if (val & SCA3000_INT_STATUS_FREE_FALL) - iio_push_event(indio_dev, - IIO_MOD_EVENT_CODE(IIO_ACCEL, - 0, - IIO_MOD_X_AND_Y_AND_Z, - IIO_EV_TYPE_MAG, - IIO_EV_DIR_FALLING), - last_timestamp); - - if (val & SCA3000_INT_STATUS_Y_TRIGGER) - iio_push_event(indio_dev, - IIO_MOD_EVENT_CODE(IIO_ACCEL, - 0, - IIO_MOD_Y, - IIO_EV_TYPE_MAG, - IIO_EV_DIR_RISING), - last_timestamp); - - if (val & SCA3000_INT_STATUS_X_TRIGGER) - iio_push_event(indio_dev, - IIO_MOD_EVENT_CODE(IIO_ACCEL, - 0, - IIO_MOD_X, - IIO_EV_TYPE_MAG, - IIO_EV_DIR_RISING), - last_timestamp); - - if (val & SCA3000_INT_STATUS_Z_TRIGGER) - iio_push_event(indio_dev, - IIO_MOD_EVENT_CODE(IIO_ACCEL, - 0, - IIO_MOD_Z, - IIO_EV_TYPE_MAG, - IIO_EV_DIR_RISING), - last_timestamp); - -done: - return IRQ_HANDLED; -} - -/** - * sca3000_read_event_config() what events are enabled - **/ -static int sca3000_read_event_config(struct iio_dev *indio_dev, - const struct iio_chan_spec *chan, - enum iio_event_type type, - enum iio_event_direction dir) -{ - struct sca3000_state *st = iio_priv(indio_dev); - int ret; - u8 protect_mask = 0x03; - int num = chan->channel2; - - /* read current value of mode register */ - mutex_lock(&st->lock); - ret = sca3000_read_data_short(st, SCA3000_REG_ADDR_MODE, 1); - if (ret) - goto error_ret; - - if ((st->rx[0] & protect_mask) != SCA3000_MEAS_MODE_MOT_DET) { - ret = 0; - } else { - ret = sca3000_read_ctrl_reg(st, SCA3000_REG_CTRL_SEL_MD_CTRL); - if (ret < 0) - goto error_ret; - /* only supporting logical or's for now */ - ret = !!(ret & sca3000_addresses[num][2]); - } -error_ret: - mutex_unlock(&st->lock); - - return ret; -} - -/** - * sca3000_query_free_fall_mode() is free fall mode enabled - **/ -static ssize_t sca3000_query_free_fall_mode(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - int ret; - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct sca3000_state *st = iio_priv(indio_dev); - int val; - - mutex_lock(&st->lock); - ret = sca3000_read_data_short(st, SCA3000_REG_ADDR_MODE, 1); - val = st->rx[0]; - mutex_unlock(&st->lock); - if (ret < 0) - return ret; - return sprintf(buf, "%d\n", !!(val & SCA3000_FREE_FALL_DETECT)); -} - -/** - * sca3000_set_free_fall_mode() simple on off control for free fall int - * - * In these chips the free fall detector should send an interrupt if - * the device falls more than 25cm. This has not been tested due - * to fragile wiring. - **/ -static ssize_t sca3000_set_free_fall_mode(struct device *dev, - struct device_attribute *attr, - const char *buf, - size_t len) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct sca3000_state *st = iio_priv(indio_dev); - u8 val; - int ret; - u8 protect_mask = SCA3000_FREE_FALL_DETECT; - - mutex_lock(&st->lock); - ret = kstrtou8(buf, 10, &val); - if (ret) - goto error_ret; - - /* read current value of mode register */ - ret = sca3000_read_data_short(st, SCA3000_REG_ADDR_MODE, 1); - if (ret) - goto error_ret; - - /* if off and should be on */ - if (val && !(st->rx[0] & protect_mask)) - ret = sca3000_write_reg(st, SCA3000_REG_ADDR_MODE, - (st->rx[0] | SCA3000_FREE_FALL_DETECT)); - /* if on and should be off */ - else if (!val && (st->rx[0] & protect_mask)) - ret = sca3000_write_reg(st, SCA3000_REG_ADDR_MODE, - (st->rx[0] & ~protect_mask)); -error_ret: - mutex_unlock(&st->lock); - - return ret ? ret : len; -} - -/** - * sca3000_write_event_config() simple on off control for motion detector - * - * This is a per axis control, but enabling any will result in the - * motion detector unit being enabled. - * N.B. enabling motion detector stops normal data acquisition. - * There is a complexity in knowing which mode to return to when - * this mode is disabled. Currently normal mode is assumed. - **/ -static int sca3000_write_event_config(struct iio_dev *indio_dev, - const struct iio_chan_spec *chan, - enum iio_event_type type, - enum iio_event_direction dir, - int state) -{ - struct sca3000_state *st = iio_priv(indio_dev); - int ret, ctrlval; - u8 protect_mask = 0x03; - int num = chan->channel2; - - mutex_lock(&st->lock); - /* - * First read the motion detector config to find out if - * this axis is on - */ - ret = sca3000_read_ctrl_reg(st, SCA3000_REG_CTRL_SEL_MD_CTRL); - if (ret < 0) - goto exit_point; - ctrlval = ret; - /* if off and should be on */ - if (state && !(ctrlval & sca3000_addresses[num][2])) { - ret = sca3000_write_ctrl_reg(st, - SCA3000_REG_CTRL_SEL_MD_CTRL, - ctrlval | - sca3000_addresses[num][2]); - if (ret) - goto exit_point; - st->mo_det_use_count++; - } else if (!state && (ctrlval & sca3000_addresses[num][2])) { - ret = sca3000_write_ctrl_reg(st, - SCA3000_REG_CTRL_SEL_MD_CTRL, - ctrlval & - ~(sca3000_addresses[num][2])); - if (ret) - goto exit_point; - st->mo_det_use_count--; - } - - /* read current value of mode register */ - ret = sca3000_read_data_short(st, SCA3000_REG_ADDR_MODE, 1); - if (ret) - goto exit_point; - /* if off and should be on */ - if ((st->mo_det_use_count) && - ((st->rx[0] & protect_mask) != SCA3000_MEAS_MODE_MOT_DET)) - ret = sca3000_write_reg(st, SCA3000_REG_ADDR_MODE, - (st->rx[0] & ~protect_mask) - | SCA3000_MEAS_MODE_MOT_DET); - /* if on and should be off */ - else if (!(st->mo_det_use_count) && - ((st->rx[0] & protect_mask) == SCA3000_MEAS_MODE_MOT_DET)) - ret = sca3000_write_reg(st, SCA3000_REG_ADDR_MODE, - (st->rx[0] & ~protect_mask)); -exit_point: - mutex_unlock(&st->lock); - - return ret; -} - -/* Free fall detector related event attribute */ -static IIO_DEVICE_ATTR_NAMED(accel_xayaz_mag_falling_en, - in_accel_x & y & z_mag_falling_en, - S_IRUGO | S_IWUSR, - sca3000_query_free_fall_mode, - sca3000_set_free_fall_mode, - 0); - -static IIO_CONST_ATTR_NAMED(accel_xayaz_mag_falling_period, - in_accel_x & y & z_mag_falling_period, - "0.226"); - -static struct attribute *sca3000_event_attributes[] = { - &iio_dev_attr_accel_xayaz_mag_falling_en.dev_attr.attr, - &iio_const_attr_accel_xayaz_mag_falling_period.dev_attr.attr, - NULL, -}; - -static struct attribute_group sca3000_event_attribute_group = { - .attrs = sca3000_event_attributes, - .name = "events", -}; - -/** - * sca3000_clean_setup() get the device into a predictable state - * - * Devices use flash memory to store many of the register values - * and hence can come up in somewhat unpredictable states. - * Hence reset everything on driver load. - **/ -static int sca3000_clean_setup(struct sca3000_state *st) -{ - int ret; - - mutex_lock(&st->lock); - /* Ensure all interrupts have been acknowledged */ - ret = sca3000_read_data_short(st, SCA3000_REG_ADDR_INT_STATUS, 1); - if (ret) - goto error_ret; - - /* Turn off all motion detection channels */ - ret = sca3000_read_ctrl_reg(st, SCA3000_REG_CTRL_SEL_MD_CTRL); - if (ret < 0) - goto error_ret; - ret = sca3000_write_ctrl_reg(st, SCA3000_REG_CTRL_SEL_MD_CTRL, - ret & SCA3000_MD_CTRL_PROT_MASK); - if (ret) - goto error_ret; - - /* Disable ring buffer */ - ret = sca3000_read_ctrl_reg(st, SCA3000_REG_CTRL_SEL_OUT_CTRL); - if (ret < 0) - goto error_ret; - ret = sca3000_write_ctrl_reg(st, SCA3000_REG_CTRL_SEL_OUT_CTRL, - (ret & SCA3000_OUT_CTRL_PROT_MASK) - | SCA3000_OUT_CTRL_BUF_X_EN - | SCA3000_OUT_CTRL_BUF_Y_EN - | SCA3000_OUT_CTRL_BUF_Z_EN - | SCA3000_OUT_CTRL_BUF_DIV_4); - if (ret) - goto error_ret; - /* Enable interrupts, relevant to mode and set up as active low */ - ret = sca3000_read_data_short(st, SCA3000_REG_ADDR_INT_MASK, 1); - if (ret) - goto error_ret; - ret = sca3000_write_reg(st, - SCA3000_REG_ADDR_INT_MASK, - (ret & SCA3000_INT_MASK_PROT_MASK) - | SCA3000_INT_MASK_ACTIVE_LOW); - if (ret) - goto error_ret; - /* - * Select normal measurement mode, free fall off, ring off - * Ring in 12 bit mode - it is fine to overwrite reserved bits 3,5 - * as that occurs in one of the example on the datasheet - */ - ret = sca3000_read_data_short(st, SCA3000_REG_ADDR_MODE, 1); - if (ret) - goto error_ret; - ret = sca3000_write_reg(st, SCA3000_REG_ADDR_MODE, - (st->rx[0] & SCA3000_MODE_PROT_MASK)); - st->bpse = 11; - -error_ret: - mutex_unlock(&st->lock); - return ret; -} - -static const struct iio_info sca3000_info = { - .attrs = &sca3000_attribute_group, - .read_raw = &sca3000_read_raw, - .write_raw = &sca3000_write_raw, - .event_attrs = &sca3000_event_attribute_group, - .read_event_value = &sca3000_read_thresh, - .write_event_value = &sca3000_write_thresh, - .read_event_config = &sca3000_read_event_config, - .write_event_config = &sca3000_write_event_config, - .driver_module = THIS_MODULE, -}; - -static int sca3000_probe(struct spi_device *spi) -{ - int ret; - struct sca3000_state *st; - struct iio_dev *indio_dev; - - indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); - if (!indio_dev) - return -ENOMEM; - - st = iio_priv(indio_dev); - spi_set_drvdata(spi, indio_dev); - st->us = spi; - mutex_init(&st->lock); - st->info = &sca3000_spi_chip_info_tbl[spi_get_device_id(spi) - ->driver_data]; - - indio_dev->dev.parent = &spi->dev; - indio_dev->name = spi_get_device_id(spi)->name; - indio_dev->info = &sca3000_info; - if (st->info->temp_output) { - indio_dev->channels = sca3000_channels_with_temp; - indio_dev->num_channels = - ARRAY_SIZE(sca3000_channels_with_temp); - } else { - indio_dev->channels = sca3000_channels; - indio_dev->num_channels = ARRAY_SIZE(sca3000_channels); - } - indio_dev->modes = INDIO_DIRECT_MODE; - - sca3000_configure_ring(indio_dev); - ret = iio_device_register(indio_dev); - if (ret < 0) - return ret; - - if (spi->irq) { - ret = request_threaded_irq(spi->irq, - NULL, - &sca3000_event_handler, - IRQF_TRIGGER_FALLING | IRQF_ONESHOT, - "sca3000", - indio_dev); - if (ret) - goto error_unregister_dev; - } - sca3000_register_ring_funcs(indio_dev); - ret = sca3000_clean_setup(st); - if (ret) - goto error_free_irq; - return 0; - -error_free_irq: - if (spi->irq) - free_irq(spi->irq, indio_dev); -error_unregister_dev: - iio_device_unregister(indio_dev); - return ret; -} - -static int sca3000_stop_all_interrupts(struct sca3000_state *st) -{ - int ret; - - mutex_lock(&st->lock); - ret = sca3000_read_data_short(st, SCA3000_REG_ADDR_INT_MASK, 1); - if (ret) - goto error_ret; - ret = sca3000_write_reg(st, SCA3000_REG_ADDR_INT_MASK, - (st->rx[0] & - ~(SCA3000_INT_MASK_RING_THREE_QUARTER | - SCA3000_INT_MASK_RING_HALF | - SCA3000_INT_MASK_ALL_INTS))); -error_ret: - mutex_unlock(&st->lock); - return ret; -} - -static int sca3000_remove(struct spi_device *spi) -{ - struct iio_dev *indio_dev = spi_get_drvdata(spi); - struct sca3000_state *st = iio_priv(indio_dev); - - /* Must ensure no interrupts can be generated after this! */ - sca3000_stop_all_interrupts(st); - if (spi->irq) - free_irq(spi->irq, indio_dev); - iio_device_unregister(indio_dev); - sca3000_unconfigure_ring(indio_dev); - - return 0; -} - -static const struct spi_device_id sca3000_id[] = { - {"sca3000_d01", d01}, - {"sca3000_e02", e02}, - {"sca3000_e04", e04}, - {"sca3000_e05", e05}, - {} -}; -MODULE_DEVICE_TABLE(spi, sca3000_id); - -static struct spi_driver sca3000_driver = { - .driver = { - .name = "sca3000", - }, - .probe = sca3000_probe, - .remove = sca3000_remove, - .id_table = sca3000_id, -}; -module_spi_driver(sca3000_driver); - -MODULE_AUTHOR("Jonathan Cameron <jic23@kernel.org>"); -MODULE_DESCRIPTION("VTI SCA3000 Series Accelerometers SPI driver"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/staging/iio/accel/sca3000_ring.c b/drivers/staging/iio/accel/sca3000_ring.c deleted file mode 100644 index d1cb9b9cf22b..000000000000 --- a/drivers/staging/iio/accel/sca3000_ring.c +++ /dev/null @@ -1,350 +0,0 @@ -/* - * sca3000_ring.c -- support VTI sca3000 series accelerometers via SPI - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - * - * Copyright (c) 2009 Jonathan Cameron <jic23@kernel.org> - * - */ - -#include <linux/interrupt.h> -#include <linux/fs.h> -#include <linux/slab.h> -#include <linux/kernel.h> -#include <linux/spi/spi.h> -#include <linux/sysfs.h> -#include <linux/sched.h> -#include <linux/poll.h> - -#include <linux/iio/iio.h> -#include <linux/iio/sysfs.h> -#include <linux/iio/buffer.h> -#include "../ring_hw.h" -#include "sca3000.h" - -/* RFC / future work - * - * The internal ring buffer doesn't actually change what it holds depending - * on which signals are enabled etc, merely whether you can read them. - * As such the scan mode selection is somewhat different than for a software - * ring buffer and changing it actually covers any data already in the buffer. - * Currently scan elements aren't configured so it doesn't matter. - */ - -static int sca3000_read_data(struct sca3000_state *st, - u8 reg_address_high, - u8 **rx_p, - int len) -{ - int ret; - struct spi_transfer xfer[2] = { - { - .len = 1, - .tx_buf = st->tx, - }, { - .len = len, - } - }; - *rx_p = kmalloc(len, GFP_KERNEL); - if (!*rx_p) { - ret = -ENOMEM; - goto error_ret; - } - xfer[1].rx_buf = *rx_p; - st->tx[0] = SCA3000_READ_REG(reg_address_high); - ret = spi_sync_transfer(st->us, xfer, ARRAY_SIZE(xfer)); - if (ret) { - dev_err(get_device(&st->us->dev), "problem reading register"); - goto error_free_rx; - } - - return 0; -error_free_rx: - kfree(*rx_p); -error_ret: - return ret; -} - -/** - * sca3000_read_first_n_hw_rb() - main ring access, pulls data from ring - * @r: the ring - * @count: number of samples to try and pull - * @data: output the actual samples pulled from the hw ring - * - * Currently does not provide timestamps. As the hardware doesn't add them they - * can only be inferred approximately from ring buffer events such as 50% full - * and knowledge of when buffer was last emptied. This is left to userspace. - **/ -static int sca3000_read_first_n_hw_rb(struct iio_buffer *r, - size_t count, char __user *buf) -{ - struct iio_hw_buffer *hw_ring = iio_to_hw_buf(r); - struct iio_dev *indio_dev = hw_ring->private; - struct sca3000_state *st = iio_priv(indio_dev); - u8 *rx; - int ret, i, num_available, num_read = 0; - int bytes_per_sample = 1; - - if (st->bpse == 11) - bytes_per_sample = 2; - - mutex_lock(&st->lock); - if (count % bytes_per_sample) { - ret = -EINVAL; - goto error_ret; - } - - ret = sca3000_read_data_short(st, SCA3000_REG_ADDR_BUF_COUNT, 1); - if (ret) - goto error_ret; - num_available = st->rx[0]; - /* - * num_available is the total number of samples available - * i.e. number of time points * number of channels. - */ - if (count > num_available * bytes_per_sample) - num_read = num_available * bytes_per_sample; - else - num_read = count; - - ret = sca3000_read_data(st, - SCA3000_REG_ADDR_RING_OUT, - &rx, num_read); - if (ret) - goto error_ret; - - for (i = 0; i < num_read / sizeof(u16); i++) - *(((u16 *)rx) + i) = be16_to_cpup((__be16 *)rx + i); - - if (copy_to_user(buf, rx, num_read)) - ret = -EFAULT; - kfree(rx); - r->stufftoread = 0; -error_ret: - mutex_unlock(&st->lock); - - return ret ? ret : num_read; -} - -static size_t sca3000_ring_buf_data_available(struct iio_buffer *r) -{ - return r->stufftoread ? r->watermark : 0; -} - -/** - * sca3000_query_ring_int() is the hardware ring status interrupt enabled - **/ -static ssize_t sca3000_query_ring_int(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); - int ret, val; - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct sca3000_state *st = iio_priv(indio_dev); - - mutex_lock(&st->lock); - ret = sca3000_read_data_short(st, SCA3000_REG_ADDR_INT_MASK, 1); - val = st->rx[0]; - mutex_unlock(&st->lock); - if (ret) - return ret; - - return sprintf(buf, "%d\n", !!(val & this_attr->address)); -} - -/** - * sca3000_set_ring_int() set state of ring status interrupt - **/ -static ssize_t sca3000_set_ring_int(struct device *dev, - struct device_attribute *attr, - const char *buf, - size_t len) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct sca3000_state *st = iio_priv(indio_dev); - struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); - u8 val; - int ret; - - mutex_lock(&st->lock); - ret = kstrtou8(buf, 10, &val); - if (ret) - goto error_ret; - ret = sca3000_read_data_short(st, SCA3000_REG_ADDR_INT_MASK, 1); - if (ret) - goto error_ret; - if (val) - ret = sca3000_write_reg(st, - SCA3000_REG_ADDR_INT_MASK, - st->rx[0] | this_attr->address); - else - ret = sca3000_write_reg(st, - SCA3000_REG_ADDR_INT_MASK, - st->rx[0] & ~this_attr->address); -error_ret: - mutex_unlock(&st->lock); - - return ret ? ret : len; -} - -static IIO_DEVICE_ATTR(50_percent, S_IRUGO | S_IWUSR, - sca3000_query_ring_int, - sca3000_set_ring_int, - SCA3000_INT_MASK_RING_HALF); - -static IIO_DEVICE_ATTR(75_percent, S_IRUGO | S_IWUSR, - sca3000_query_ring_int, - sca3000_set_ring_int, - SCA3000_INT_MASK_RING_THREE_QUARTER); - -static ssize_t sca3000_show_buffer_scale(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct sca3000_state *st = iio_priv(indio_dev); - - return sprintf(buf, "0.%06d\n", 4 * st->info->scale); -} - -static IIO_DEVICE_ATTR(in_accel_scale, - S_IRUGO, - sca3000_show_buffer_scale, - NULL, - 0); - -/* - * Ring buffer attributes - * This device is a bit unusual in that the sampling frequency and bpse - * only apply to the ring buffer. At all times full rate and accuracy - * is available via direct reading from registers. - */ -static const struct attribute *sca3000_ring_attributes[] = { - &iio_dev_attr_50_percent.dev_attr.attr, - &iio_dev_attr_75_percent.dev_attr.attr, - &iio_dev_attr_in_accel_scale.dev_attr.attr, - NULL, -}; - -static struct iio_buffer *sca3000_rb_allocate(struct iio_dev *indio_dev) -{ - struct iio_buffer *buf; - struct iio_hw_buffer *ring; - - ring = kzalloc(sizeof(*ring), GFP_KERNEL); - if (!ring) - return NULL; - - ring->private = indio_dev; - buf = &ring->buf; - buf->stufftoread = 0; - buf->length = 64; - buf->attrs = sca3000_ring_attributes; - iio_buffer_init(buf); - - return buf; -} - -static void sca3000_ring_release(struct iio_buffer *r) -{ - kfree(iio_to_hw_buf(r)); -} - -static const struct iio_buffer_access_funcs sca3000_ring_access_funcs = { - .read_first_n = &sca3000_read_first_n_hw_rb, - .data_available = sca3000_ring_buf_data_available, - .release = sca3000_ring_release, - - .modes = INDIO_BUFFER_HARDWARE, -}; - -int sca3000_configure_ring(struct iio_dev *indio_dev) -{ - struct iio_buffer *buffer; - - buffer = sca3000_rb_allocate(indio_dev); - if (!buffer) - return -ENOMEM; - indio_dev->modes |= INDIO_BUFFER_HARDWARE; - - indio_dev->buffer->access = &sca3000_ring_access_funcs; - - iio_device_attach_buffer(indio_dev, buffer); - - return 0; -} - -void sca3000_unconfigure_ring(struct iio_dev *indio_dev) -{ - iio_buffer_put(indio_dev->buffer); -} - -static inline -int __sca3000_hw_ring_state_set(struct iio_dev *indio_dev, bool state) -{ - struct sca3000_state *st = iio_priv(indio_dev); - int ret; - - mutex_lock(&st->lock); - ret = sca3000_read_data_short(st, SCA3000_REG_ADDR_MODE, 1); - if (ret) - goto error_ret; - if (state) { - dev_info(&indio_dev->dev, "supposedly enabling ring buffer\n"); - ret = sca3000_write_reg(st, - SCA3000_REG_ADDR_MODE, - (st->rx[0] | SCA3000_RING_BUF_ENABLE)); - } else - ret = sca3000_write_reg(st, - SCA3000_REG_ADDR_MODE, - (st->rx[0] & ~SCA3000_RING_BUF_ENABLE)); -error_ret: - mutex_unlock(&st->lock); - - return ret; -} - -/** - * sca3000_hw_ring_preenable() hw ring buffer preenable function - * - * Very simple enable function as the chip will allows normal reads - * during ring buffer operation so as long as it is indeed running - * before we notify the core, the precise ordering does not matter. - **/ -static int sca3000_hw_ring_preenable(struct iio_dev *indio_dev) -{ - return __sca3000_hw_ring_state_set(indio_dev, 1); -} - -static int sca3000_hw_ring_postdisable(struct iio_dev *indio_dev) -{ - return __sca3000_hw_ring_state_set(indio_dev, 0); -} - -static const struct iio_buffer_setup_ops sca3000_ring_setup_ops = { - .preenable = &sca3000_hw_ring_preenable, - .postdisable = &sca3000_hw_ring_postdisable, -}; - -void sca3000_register_ring_funcs(struct iio_dev *indio_dev) -{ - indio_dev->setup_ops = &sca3000_ring_setup_ops; -} - -/** - * sca3000_ring_int_process() ring specific interrupt handling. - * - * This is only split from the main interrupt handler so as to - * reduce the amount of code if the ring buffer is not enabled. - **/ -void sca3000_ring_int_process(u8 val, struct iio_buffer *ring) -{ - if (val & (SCA3000_INT_STATUS_THREE_QUARTERS | - SCA3000_INT_STATUS_HALF)) { - ring->stufftoread = true; - wake_up_interruptible(&ring->pollq); - } -} diff --git a/drivers/staging/iio/adc/Makefile b/drivers/staging/iio/adc/Makefile index 3cdd83ccec8e..ac09485923b6 100644 --- a/drivers/staging/iio/adc/Makefile +++ b/drivers/staging/iio/adc/Makefile @@ -2,7 +2,6 @@ # Makefile for industrial I/O ADC drivers # -ad7606-y := ad7606_core.o ad7606_ring.o obj-$(CONFIG_AD7606_IFACE_PARALLEL) += ad7606_par.o obj-$(CONFIG_AD7606_IFACE_SPI) += ad7606_spi.o obj-$(CONFIG_AD7606) += ad7606.o diff --git a/drivers/staging/iio/adc/ad7192.c b/drivers/staging/iio/adc/ad7192.c index 1cf6b79801a9..1fb68c01abd5 100644 --- a/drivers/staging/iio/adc/ad7192.c +++ b/drivers/staging/iio/adc/ad7192.c @@ -152,7 +152,8 @@ */ struct ad7192_state { - struct regulator *reg; + struct regulator *avdd; + struct regulator *dvdd; u16 int_vref_mv; u32 mclk; u32 f_order; @@ -322,57 +323,6 @@ out: return ret; } -static ssize_t ad7192_read_frequency(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct ad7192_state *st = iio_priv(indio_dev); - - return sprintf(buf, "%d\n", st->mclk / - (st->f_order * 1024 * AD7192_MODE_RATE(st->mode))); -} - -static ssize_t ad7192_write_frequency(struct device *dev, - struct device_attribute *attr, - const char *buf, - size_t len) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct ad7192_state *st = iio_priv(indio_dev); - unsigned long lval; - int div, ret; - - ret = kstrtoul(buf, 10, &lval); - if (ret) - return ret; - if (lval == 0) - return -EINVAL; - - ret = iio_device_claim_direct_mode(indio_dev); - if (ret) - return ret; - - div = st->mclk / (lval * st->f_order * 1024); - if (div < 1 || div > 1023) { - ret = -EINVAL; - goto out; - } - - st->mode &= ~AD7192_MODE_RATE(-1); - st->mode |= AD7192_MODE_RATE(div); - ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode); - -out: - iio_device_release_direct_mode(indio_dev); - - return ret ? ret : len; -} - -static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO, - ad7192_read_frequency, - ad7192_write_frequency); - static ssize_t ad7192_show_scale_available(struct device *dev, struct device_attribute *attr, char *buf) @@ -471,7 +421,6 @@ static IIO_DEVICE_ATTR(ac_excitation_en, S_IRUGO | S_IWUSR, AD7192_REG_MODE); static struct attribute *ad7192_attributes[] = { - &iio_dev_attr_sampling_frequency.dev_attr.attr, &iio_dev_attr_in_v_m_v_scale_available.dev_attr.attr, &iio_dev_attr_in_voltage_scale_available.dev_attr.attr, &iio_dev_attr_bridge_switch_en.dev_attr.attr, @@ -484,7 +433,6 @@ static const struct attribute_group ad7192_attribute_group = { }; static struct attribute *ad7195_attributes[] = { - &iio_dev_attr_sampling_frequency.dev_attr.attr, &iio_dev_attr_in_v_m_v_scale_available.dev_attr.attr, &iio_dev_attr_in_voltage_scale_available.dev_attr.attr, &iio_dev_attr_bridge_switch_en.dev_attr.attr, @@ -536,6 +484,10 @@ static int ad7192_read_raw(struct iio_dev *indio_dev, if (chan->type == IIO_TEMP) *val -= 273 * ad7192_get_temp_scale(unipolar); return IIO_VAL_INT; + case IIO_CHAN_INFO_SAMP_FREQ: + *val = st->mclk / + (st->f_order * 1024 * AD7192_MODE_RATE(st->mode)); + return IIO_VAL_INT; } return -EINVAL; @@ -548,7 +500,7 @@ static int ad7192_write_raw(struct iio_dev *indio_dev, long mask) { struct ad7192_state *st = iio_priv(indio_dev); - int ret, i; + int ret, i, div; unsigned int tmp; ret = iio_device_claim_direct_mode(indio_dev); @@ -572,6 +524,22 @@ static int ad7192_write_raw(struct iio_dev *indio_dev, break; } break; + case IIO_CHAN_INFO_SAMP_FREQ: + if (!val) { + ret = -EINVAL; + break; + } + + div = st->mclk / (val * st->f_order * 1024); + if (div < 1 || div > 1023) { + ret = -EINVAL; + break; + } + + st->mode &= ~AD7192_MODE_RATE(-1); + st->mode |= AD7192_MODE_RATE(div); + ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode); + break; default: ret = -EINVAL; } @@ -585,7 +553,14 @@ static int ad7192_write_raw_get_fmt(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, long mask) { - return IIO_VAL_INT_PLUS_NANO; + switch (mask) { + case IIO_CHAN_INFO_SCALE: + return IIO_VAL_INT_PLUS_NANO; + case IIO_CHAN_INFO_SAMP_FREQ: + return IIO_VAL_INT; + default: + return -EINVAL; + } } static const struct iio_info ad7192_info = { @@ -659,15 +634,30 @@ static int ad7192_probe(struct spi_device *spi) st = iio_priv(indio_dev); - st->reg = devm_regulator_get(&spi->dev, "vcc"); - if (!IS_ERR(st->reg)) { - ret = regulator_enable(st->reg); - if (ret) - return ret; + st->avdd = devm_regulator_get(&spi->dev, "avdd"); + if (IS_ERR(st->avdd)) + return PTR_ERR(st->avdd); - voltage_uv = regulator_get_voltage(st->reg); + ret = regulator_enable(st->avdd); + if (ret) { + dev_err(&spi->dev, "Failed to enable specified AVdd supply\n"); + return ret; + } + + st->dvdd = devm_regulator_get(&spi->dev, "dvdd"); + if (IS_ERR(st->dvdd)) { + ret = PTR_ERR(st->dvdd); + goto error_disable_avdd; } + ret = regulator_enable(st->dvdd); + if (ret) { + dev_err(&spi->dev, "Failed to enable specified DVdd supply\n"); + goto error_disable_avdd; + } + + voltage_uv = regulator_get_voltage(st->avdd); + if (pdata->vref_mv) st->int_vref_mv = pdata->vref_mv; else if (voltage_uv) @@ -701,7 +691,7 @@ static int ad7192_probe(struct spi_device *spi) ret = ad_sd_setup_buffer_and_trigger(indio_dev); if (ret) - goto error_disable_reg; + goto error_disable_dvdd; ret = ad7192_setup(st, pdata); if (ret) @@ -714,9 +704,10 @@ static int ad7192_probe(struct spi_device *spi) error_remove_trigger: ad_sd_cleanup_buffer_and_trigger(indio_dev); -error_disable_reg: - if (!IS_ERR(st->reg)) - regulator_disable(st->reg); +error_disable_dvdd: + regulator_disable(st->dvdd); +error_disable_avdd: + regulator_disable(st->avdd); return ret; } @@ -729,8 +720,8 @@ static int ad7192_remove(struct spi_device *spi) iio_device_unregister(indio_dev); ad_sd_cleanup_buffer_and_trigger(indio_dev); - if (!IS_ERR(st->reg)) - regulator_disable(st->reg); + regulator_disable(st->dvdd); + regulator_disable(st->avdd); return 0; } diff --git a/drivers/staging/iio/adc/ad7280a.c b/drivers/staging/iio/adc/ad7280a.c index b460dda7eb65..ee679ac0368f 100644 --- a/drivers/staging/iio/adc/ad7280a.c +++ b/drivers/staging/iio/adc/ad7280a.c @@ -777,7 +777,7 @@ static struct attribute *ad7280_event_attributes[] = { NULL, }; -static struct attribute_group ad7280_event_attrs_group = { +static const struct attribute_group ad7280_event_attrs_group = { .attrs = ad7280_event_attributes, }; diff --git a/drivers/staging/iio/adc/ad7606_core.c b/drivers/staging/iio/adc/ad7606.c index f79ee61851f6..453190864b2f 100644 --- a/drivers/staging/iio/adc/ad7606_core.c +++ b/drivers/staging/iio/adc/ad7606.c @@ -13,7 +13,7 @@ #include <linux/sysfs.h> #include <linux/regulator/consumer.h> #include <linux/err.h> -#include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/delay.h> #include <linux/sched.h> #include <linux/module.h> @@ -21,58 +21,109 @@ #include <linux/iio/iio.h> #include <linux/iio/sysfs.h> #include <linux/iio/buffer.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/triggered_buffer.h> #include "ad7606.h" -int ad7606_reset(struct ad7606_state *st) +static int ad7606_reset(struct ad7606_state *st) { - if (gpio_is_valid(st->pdata->gpio_reset)) { - gpio_set_value(st->pdata->gpio_reset, 1); + if (st->gpio_reset) { + gpiod_set_value(st->gpio_reset, 1); ndelay(100); /* t_reset >= 100ns */ - gpio_set_value(st->pdata->gpio_reset, 0); + gpiod_set_value(st->gpio_reset, 0); return 0; } return -ENODEV; } +static int ad7606_read_samples(struct ad7606_state *st) +{ + unsigned int num = st->chip_info->num_channels; + u16 *data = st->data; + int ret; + + /* + * The frstdata signal is set to high while and after reading the sample + * of the first channel and low for all other channels. This can be used + * to check that the incoming data is correctly aligned. During normal + * operation the data should never become unaligned, but some glitch or + * electrostatic discharge might cause an extra read or clock cycle. + * Monitoring the frstdata signal allows to recover from such failure + * situations. + */ + + if (st->gpio_frstdata) { + ret = st->bops->read_block(st->dev, 1, data); + if (ret) + return ret; + + if (!gpiod_get_value(st->gpio_frstdata)) { + ad7606_reset(st); + return -EIO; + } + + data++; + num--; + } + + return st->bops->read_block(st->dev, num, data); +} + +static irqreturn_t ad7606_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct ad7606_state *st = iio_priv(pf->indio_dev); + + gpiod_set_value(st->gpio_convst, 1); + + return IRQ_HANDLED; +} + +/** + * ad7606_poll_bh_to_ring() bh of trigger launched polling to ring buffer + * @work_s: the work struct through which this was scheduled + * + * Currently there is no option in this driver to disable the saving of + * timestamps within the ring. + * I think the one copy of this at a time was to avoid problems if the + * trigger was set far too high and the reads then locked up the computer. + **/ +static void ad7606_poll_bh_to_ring(struct work_struct *work_s) +{ + struct ad7606_state *st = container_of(work_s, struct ad7606_state, + poll_work); + struct iio_dev *indio_dev = iio_priv_to_dev(st); + int ret; + + ret = ad7606_read_samples(st); + if (ret == 0) + iio_push_to_buffers_with_timestamp(indio_dev, st->data, + iio_get_time_ns(indio_dev)); + + gpiod_set_value(st->gpio_convst, 0); + iio_trigger_notify_done(indio_dev->trig); +} + static int ad7606_scan_direct(struct iio_dev *indio_dev, unsigned int ch) { struct ad7606_state *st = iio_priv(indio_dev); int ret; st->done = false; - gpio_set_value(st->pdata->gpio_convst, 1); + gpiod_set_value(st->gpio_convst, 1); ret = wait_event_interruptible(st->wq_data_avail, st->done); if (ret) goto error_ret; - if (gpio_is_valid(st->pdata->gpio_frstdata)) { - ret = st->bops->read_block(st->dev, 1, st->data); - if (ret) - goto error_ret; - if (!gpio_get_value(st->pdata->gpio_frstdata)) { - /* This should never happen */ - ad7606_reset(st); - ret = -EIO; - goto error_ret; - } - ret = st->bops->read_block(st->dev, - st->chip_info->num_channels - 1, &st->data[1]); - if (ret) - goto error_ret; - } else { - ret = st->bops->read_block(st->dev, - st->chip_info->num_channels, st->data); - if (ret) - goto error_ret; - } - - ret = st->data[ch]; + ret = ad7606_read_samples(st); + if (ret == 0) + ret = st->data[ch]; error_ret: - gpio_set_value(st->pdata->gpio_convst, 0); + gpiod_set_value(st->gpio_convst, 0); return ret; } @@ -103,6 +154,9 @@ static int ad7606_read_raw(struct iio_dev *indio_dev, *val = st->range * 2; *val2 = st->chip_info->channels[0].scan_type.realbits; return IIO_VAL_FRACTIONAL_LOG2; + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + *val = st->oversampling; + return IIO_VAL_INT; } return -EINVAL; } @@ -129,12 +183,11 @@ static ssize_t ad7606_store_range(struct device *dev, if (ret) return ret; - if (!(lval == 5000 || lval == 10000)) { - dev_err(dev, "range is not supported\n"); + if (!(lval == 5000 || lval == 10000)) return -EINVAL; - } + mutex_lock(&indio_dev->mlock); - gpio_set_value(st->pdata->gpio_range, lval == 10000); + gpiod_set_value(st->gpio_range, lval == 10000); st->range = lval; mutex_unlock(&indio_dev->mlock); @@ -145,19 +198,9 @@ static IIO_DEVICE_ATTR(in_voltage_range, S_IRUGO | S_IWUSR, ad7606_show_range, ad7606_store_range, 0); static IIO_CONST_ATTR(in_voltage_range_available, "5000 10000"); -static ssize_t ad7606_show_oversampling_ratio(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct ad7606_state *st = iio_priv(indio_dev); - - return sprintf(buf, "%u\n", st->oversampling); -} - static int ad7606_oversampling_get_index(unsigned int val) { - unsigned char supported[] = {0, 2, 4, 8, 16, 32, 64}; + unsigned char supported[] = {1, 2, 4, 8, 16, 32, 64}; int i; for (i = 0; i < ARRAY_SIZE(supported); i++) @@ -167,44 +210,45 @@ static int ad7606_oversampling_get_index(unsigned int val) return -EINVAL; } -static ssize_t ad7606_store_oversampling_ratio(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t count) +static int ad7606_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, + int val2, + long mask) { - struct iio_dev *indio_dev = dev_to_iio_dev(dev); struct ad7606_state *st = iio_priv(indio_dev); - unsigned long lval; + int values[3]; int ret; - ret = kstrtoul(buf, 10, &lval); - if (ret) - return ret; + switch (mask) { + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + if (val2) + return -EINVAL; + ret = ad7606_oversampling_get_index(val); + if (ret < 0) + return ret; - ret = ad7606_oversampling_get_index(lval); - if (ret < 0) { - dev_err(dev, "oversampling %lu is not supported\n", lval); - return ret; - } + values[0] = (ret >> 0) & 1; + values[1] = (ret >> 1) & 1; + values[2] = (ret >> 2) & 1; - mutex_lock(&indio_dev->mlock); - gpio_set_value(st->pdata->gpio_os0, (ret >> 0) & 1); - gpio_set_value(st->pdata->gpio_os1, (ret >> 1) & 1); - gpio_set_value(st->pdata->gpio_os1, (ret >> 2) & 1); - st->oversampling = lval; - mutex_unlock(&indio_dev->mlock); + mutex_lock(&indio_dev->mlock); + gpiod_set_array_value(ARRAY_SIZE(values), st->gpio_os->desc, + values); + st->oversampling = val; + mutex_unlock(&indio_dev->mlock); - return count; + return 0; + default: + return -EINVAL; + } } -static IIO_DEVICE_ATTR(oversampling_ratio, S_IRUGO | S_IWUSR, - ad7606_show_oversampling_ratio, - ad7606_store_oversampling_ratio, 0); -static IIO_CONST_ATTR(oversampling_ratio_available, "0 2 4 8 16 32 64"); +static IIO_CONST_ATTR(oversampling_ratio_available, "1 2 4 8 16 32 64"); static struct attribute *ad7606_attributes_os_and_range[] = { &iio_dev_attr_in_voltage_range.dev_attr.attr, &iio_const_attr_in_voltage_range_available.dev_attr.attr, - &iio_dev_attr_oversampling_ratio.dev_attr.attr, &iio_const_attr_oversampling_ratio_available.dev_attr.attr, NULL, }; @@ -214,7 +258,6 @@ static const struct attribute_group ad7606_attribute_group_os_and_range = { }; static struct attribute *ad7606_attributes_os[] = { - &iio_dev_attr_oversampling_ratio.dev_attr.attr, &iio_const_attr_oversampling_ratio_available.dev_attr.attr, NULL, }; @@ -241,6 +284,8 @@ static const struct attribute_group ad7606_attribute_group_range = { .address = num, \ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),\ + .info_mask_shared_by_all = \ + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \ .scan_index = num, \ .scan_type = { \ .sign = 's', \ @@ -267,20 +312,14 @@ static const struct ad7606_chip_info ad7606_chip_info_tbl[] = { * More devices added in future */ [ID_AD7606_8] = { - .name = "ad7606", - .int_vref_mv = 2500, .channels = ad7606_channels, .num_channels = 9, }, [ID_AD7606_6] = { - .name = "ad7606-6", - .int_vref_mv = 2500, .channels = ad7606_channels, .num_channels = 7, }, [ID_AD7606_4] = { - .name = "ad7606-4", - .int_vref_mv = 2500, .channels = ad7606_channels, .num_channels = 5, }, @@ -288,119 +327,34 @@ static const struct ad7606_chip_info ad7606_chip_info_tbl[] = { static int ad7606_request_gpios(struct ad7606_state *st) { - struct gpio gpio_array[3] = { - [0] = { - .gpio = st->pdata->gpio_os0, - .flags = GPIOF_DIR_OUT | ((st->oversampling & 1) ? - GPIOF_INIT_HIGH : GPIOF_INIT_LOW), - .label = "AD7606_OS0", - }, - [1] = { - .gpio = st->pdata->gpio_os1, - .flags = GPIOF_DIR_OUT | ((st->oversampling & 2) ? - GPIOF_INIT_HIGH : GPIOF_INIT_LOW), - .label = "AD7606_OS1", - }, - [2] = { - .gpio = st->pdata->gpio_os2, - .flags = GPIOF_DIR_OUT | ((st->oversampling & 4) ? - GPIOF_INIT_HIGH : GPIOF_INIT_LOW), - .label = "AD7606_OS2", - }, - }; - int ret; - - if (gpio_is_valid(st->pdata->gpio_convst)) { - ret = gpio_request_one(st->pdata->gpio_convst, - GPIOF_OUT_INIT_LOW, - "AD7606_CONVST"); - if (ret) { - dev_err(st->dev, "failed to request GPIO CONVST\n"); - goto error_ret; - } - } else { - ret = -EIO; - goto error_ret; - } - - if (gpio_is_valid(st->pdata->gpio_os0) && - gpio_is_valid(st->pdata->gpio_os1) && - gpio_is_valid(st->pdata->gpio_os2)) { - ret = gpio_request_array(gpio_array, ARRAY_SIZE(gpio_array)); - if (ret < 0) - goto error_free_convst; - } - - if (gpio_is_valid(st->pdata->gpio_reset)) { - ret = gpio_request_one(st->pdata->gpio_reset, - GPIOF_OUT_INIT_LOW, - "AD7606_RESET"); - if (ret < 0) - goto error_free_os; - } - - if (gpio_is_valid(st->pdata->gpio_range)) { - ret = gpio_request_one(st->pdata->gpio_range, GPIOF_DIR_OUT | - ((st->range == 10000) ? GPIOF_INIT_HIGH : - GPIOF_INIT_LOW), "AD7606_RANGE"); - if (ret < 0) - goto error_free_reset; - } - if (gpio_is_valid(st->pdata->gpio_stby)) { - ret = gpio_request_one(st->pdata->gpio_stby, - GPIOF_OUT_INIT_HIGH, - "AD7606_STBY"); - if (ret < 0) - goto error_free_range; - } - - if (gpio_is_valid(st->pdata->gpio_frstdata)) { - ret = gpio_request_one(st->pdata->gpio_frstdata, GPIOF_IN, - "AD7606_FRSTDATA"); - if (ret < 0) - goto error_free_stby; - } - - return 0; - -error_free_stby: - if (gpio_is_valid(st->pdata->gpio_stby)) - gpio_free(st->pdata->gpio_stby); -error_free_range: - if (gpio_is_valid(st->pdata->gpio_range)) - gpio_free(st->pdata->gpio_range); -error_free_reset: - if (gpio_is_valid(st->pdata->gpio_reset)) - gpio_free(st->pdata->gpio_reset); -error_free_os: - if (gpio_is_valid(st->pdata->gpio_os0) && - gpio_is_valid(st->pdata->gpio_os1) && - gpio_is_valid(st->pdata->gpio_os2)) - gpio_free_array(gpio_array, ARRAY_SIZE(gpio_array)); -error_free_convst: - gpio_free(st->pdata->gpio_convst); -error_ret: - return ret; -} - -static void ad7606_free_gpios(struct ad7606_state *st) -{ - if (gpio_is_valid(st->pdata->gpio_frstdata)) - gpio_free(st->pdata->gpio_frstdata); - if (gpio_is_valid(st->pdata->gpio_stby)) - gpio_free(st->pdata->gpio_stby); - if (gpio_is_valid(st->pdata->gpio_range)) - gpio_free(st->pdata->gpio_range); - if (gpio_is_valid(st->pdata->gpio_reset)) - gpio_free(st->pdata->gpio_reset); - if (gpio_is_valid(st->pdata->gpio_os0) && - gpio_is_valid(st->pdata->gpio_os1) && - gpio_is_valid(st->pdata->gpio_os2)) { - gpio_free(st->pdata->gpio_os2); - gpio_free(st->pdata->gpio_os1); - gpio_free(st->pdata->gpio_os0); - } - gpio_free(st->pdata->gpio_convst); + struct device *dev = st->dev; + + st->gpio_convst = devm_gpiod_get(dev, "conversion-start", + GPIOD_OUT_LOW); + if (IS_ERR(st->gpio_convst)) + return PTR_ERR(st->gpio_convst); + + st->gpio_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(st->gpio_reset)) + return PTR_ERR(st->gpio_reset); + + st->gpio_range = devm_gpiod_get_optional(dev, "range", GPIOD_OUT_LOW); + if (IS_ERR(st->gpio_range)) + return PTR_ERR(st->gpio_range); + + st->gpio_standby = devm_gpiod_get_optional(dev, "standby", + GPIOD_OUT_HIGH); + if (IS_ERR(st->gpio_standby)) + return PTR_ERR(st->gpio_standby); + + st->gpio_frstdata = devm_gpiod_get_optional(dev, "first-data", + GPIOD_IN); + if (IS_ERR(st->gpio_frstdata)) + return PTR_ERR(st->gpio_frstdata); + + st->gpio_os = devm_gpiod_get_array_optional(dev, "oversampling-ratio", + GPIOD_OUT_LOW); + return PTR_ERR_OR_ZERO(st->gpio_os); } /** @@ -429,12 +383,14 @@ static const struct iio_info ad7606_info_no_os_or_range = { static const struct iio_info ad7606_info_os_and_range = { .driver_module = THIS_MODULE, .read_raw = &ad7606_read_raw, + .write_raw = &ad7606_write_raw, .attrs = &ad7606_attribute_group_os_and_range, }; static const struct iio_info ad7606_info_os = { .driver_module = THIS_MODULE, .read_raw = &ad7606_read_raw, + .write_raw = &ad7606_write_raw, .attrs = &ad7606_attribute_group_os, }; @@ -444,81 +400,73 @@ static const struct iio_info ad7606_info_range = { .attrs = &ad7606_attribute_group_range, }; -struct iio_dev *ad7606_probe(struct device *dev, int irq, - void __iomem *base_address, - unsigned int id, - const struct ad7606_bus_ops *bops) +int ad7606_probe(struct device *dev, int irq, void __iomem *base_address, + const char *name, unsigned int id, + const struct ad7606_bus_ops *bops) { - struct ad7606_platform_data *pdata = dev->platform_data; struct ad7606_state *st; int ret; struct iio_dev *indio_dev; indio_dev = devm_iio_device_alloc(dev, sizeof(*st)); if (!indio_dev) - return ERR_PTR(-ENOMEM); + return -ENOMEM; st = iio_priv(indio_dev); st->dev = dev; st->bops = bops; st->base_address = base_address; - st->range = pdata->default_range == 10000 ? 10000 : 5000; + st->range = 5000; + st->oversampling = 1; + INIT_WORK(&st->poll_work, &ad7606_poll_bh_to_ring); - ret = ad7606_oversampling_get_index(pdata->default_os); - if (ret < 0) { - dev_warn(dev, "oversampling %d is not supported\n", - pdata->default_os); - st->oversampling = 0; - } else { - st->oversampling = pdata->default_os; - } + st->reg = devm_regulator_get(dev, "avcc"); + if (IS_ERR(st->reg)) + return PTR_ERR(st->reg); - st->reg = devm_regulator_get(dev, "vcc"); - if (!IS_ERR(st->reg)) { - ret = regulator_enable(st->reg); - if (ret) - return ERR_PTR(ret); + ret = regulator_enable(st->reg); + if (ret) { + dev_err(dev, "Failed to enable specified AVcc supply\n"); + return ret; } - st->pdata = pdata; + ret = ad7606_request_gpios(st); + if (ret) + goto error_disable_reg; + st->chip_info = &ad7606_chip_info_tbl[id]; indio_dev->dev.parent = dev; - if (gpio_is_valid(st->pdata->gpio_os0) && - gpio_is_valid(st->pdata->gpio_os1) && - gpio_is_valid(st->pdata->gpio_os2)) { - if (gpio_is_valid(st->pdata->gpio_range)) + if (st->gpio_os) { + if (st->gpio_range) indio_dev->info = &ad7606_info_os_and_range; else indio_dev->info = &ad7606_info_os; } else { - if (gpio_is_valid(st->pdata->gpio_range)) + if (st->gpio_range) indio_dev->info = &ad7606_info_range; else indio_dev->info = &ad7606_info_no_os_or_range; } indio_dev->modes = INDIO_DIRECT_MODE; - indio_dev->name = st->chip_info->name; + indio_dev->name = name; indio_dev->channels = st->chip_info->channels; indio_dev->num_channels = st->chip_info->num_channels; init_waitqueue_head(&st->wq_data_avail); - ret = ad7606_request_gpios(st); - if (ret) - goto error_disable_reg; - ret = ad7606_reset(st); if (ret) dev_warn(st->dev, "failed to RESET: no RESET GPIO specified\n"); - ret = request_irq(irq, ad7606_interrupt, - IRQF_TRIGGER_FALLING, st->chip_info->name, indio_dev); + ret = request_irq(irq, ad7606_interrupt, IRQF_TRIGGER_FALLING, name, + indio_dev); if (ret) - goto error_free_gpios; + goto error_disable_reg; - ret = ad7606_register_ring_funcs_and_init(indio_dev); + ret = iio_triggered_buffer_setup(indio_dev, &ad7606_trigger_handler, + NULL, NULL); if (ret) goto error_free_irq; @@ -526,35 +474,31 @@ struct iio_dev *ad7606_probe(struct device *dev, int irq, if (ret) goto error_unregister_ring; - return indio_dev; + dev_set_drvdata(dev, indio_dev); + + return 0; error_unregister_ring: - ad7606_ring_cleanup(indio_dev); + iio_triggered_buffer_cleanup(indio_dev); error_free_irq: free_irq(irq, indio_dev); -error_free_gpios: - ad7606_free_gpios(st); - error_disable_reg: - if (!IS_ERR(st->reg)) - regulator_disable(st->reg); - return ERR_PTR(ret); + regulator_disable(st->reg); + return ret; } EXPORT_SYMBOL_GPL(ad7606_probe); -int ad7606_remove(struct iio_dev *indio_dev, int irq) +int ad7606_remove(struct device *dev, int irq) { + struct iio_dev *indio_dev = dev_get_drvdata(dev); struct ad7606_state *st = iio_priv(indio_dev); iio_device_unregister(indio_dev); - ad7606_ring_cleanup(indio_dev); + iio_triggered_buffer_cleanup(indio_dev); free_irq(irq, indio_dev); - if (!IS_ERR(st->reg)) - regulator_disable(st->reg); - - ad7606_free_gpios(st); + regulator_disable(st->reg); return 0; } @@ -567,10 +511,9 @@ static int ad7606_suspend(struct device *dev) struct iio_dev *indio_dev = dev_get_drvdata(dev); struct ad7606_state *st = iio_priv(indio_dev); - if (gpio_is_valid(st->pdata->gpio_stby)) { - if (gpio_is_valid(st->pdata->gpio_range)) - gpio_set_value(st->pdata->gpio_range, 1); - gpio_set_value(st->pdata->gpio_stby, 0); + if (st->gpio_standby) { + gpiod_set_value(st->gpio_range, 1); + gpiod_set_value(st->gpio_standby, 0); } return 0; @@ -581,12 +524,9 @@ static int ad7606_resume(struct device *dev) struct iio_dev *indio_dev = dev_get_drvdata(dev); struct ad7606_state *st = iio_priv(indio_dev); - if (gpio_is_valid(st->pdata->gpio_stby)) { - if (gpio_is_valid(st->pdata->gpio_range)) - gpio_set_value(st->pdata->gpio_range, - st->range == 10000); - - gpio_set_value(st->pdata->gpio_stby, 1); + if (st->gpio_standby) { + gpiod_set_value(st->gpio_range, st->range == 10000); + gpiod_set_value(st->gpio_standby, 1); ad7606_reset(st); } diff --git a/drivers/staging/iio/adc/ad7606.h b/drivers/staging/iio/adc/ad7606.h index 39f50440d915..746f9553d2ba 100644 --- a/drivers/staging/iio/adc/ad7606.h +++ b/drivers/staging/iio/adc/ad7606.h @@ -9,48 +9,14 @@ #ifndef IIO_ADC_AD7606_H_ #define IIO_ADC_AD7606_H_ -/* - * TODO: struct ad7606_platform_data needs to go into include/linux/iio - */ - -/** - * struct ad7606_platform_data - platform/board specific information - * @default_os: default oversampling value {0, 2, 4, 8, 16, 32, 64} - * @default_range: default range +/-{5000, 10000} mVolt - * @gpio_convst: number of gpio connected to the CONVST pin - * @gpio_reset: gpio connected to the RESET pin, if not used set to -1 - * @gpio_range: gpio connected to the RANGE pin, if not used set to -1 - * @gpio_os0: gpio connected to the OS0 pin, if not used set to -1 - * @gpio_os1: gpio connected to the OS1 pin, if not used set to -1 - * @gpio_os2: gpio connected to the OS2 pin, if not used set to -1 - * @gpio_frstdata: gpio connected to the FRSTDAT pin, if not used set to -1 - * @gpio_stby: gpio connected to the STBY pin, if not used set to -1 - */ - -struct ad7606_platform_data { - unsigned int default_os; - unsigned int default_range; - unsigned int gpio_convst; - unsigned int gpio_reset; - unsigned int gpio_range; - unsigned int gpio_os0; - unsigned int gpio_os1; - unsigned int gpio_os2; - unsigned int gpio_frstdata; - unsigned int gpio_stby; -}; - /** * struct ad7606_chip_info - chip specific information * @name: identification string for chip - * @int_vref_mv: the internal reference voltage * @channels: channel specification * @num_channels: number of channels */ struct ad7606_chip_info { - const char *name; - u16 int_vref_mv; const struct iio_chan_spec *channels; unsigned int num_channels; }; @@ -62,7 +28,6 @@ struct ad7606_chip_info { struct ad7606_state { struct device *dev; const struct ad7606_chip_info *chip_info; - struct ad7606_platform_data *pdata; struct regulator *reg; struct work_struct poll_work; wait_queue_head_t wq_data_avail; @@ -72,12 +37,19 @@ struct ad7606_state { bool done; void __iomem *base_address; + struct gpio_desc *gpio_convst; + struct gpio_desc *gpio_reset; + struct gpio_desc *gpio_range; + struct gpio_desc *gpio_standby; + struct gpio_desc *gpio_frstdata; + struct gpio_descs *gpio_os; + /* * DMA (thus cache coherency maintenance) requires the * transfer buffers to live in their own cache lines. + * 8 * 16-bit samples + 64-bit timestamp */ - - unsigned short data[8] ____cacheline_aligned; + unsigned short data[12] ____cacheline_aligned; }; struct ad7606_bus_ops { @@ -85,11 +57,10 @@ struct ad7606_bus_ops { int (*read_block)(struct device *, int, void *); }; -struct iio_dev *ad7606_probe(struct device *dev, int irq, - void __iomem *base_address, unsigned int id, - const struct ad7606_bus_ops *bops); -int ad7606_remove(struct iio_dev *indio_dev, int irq); -int ad7606_reset(struct ad7606_state *st); +int ad7606_probe(struct device *dev, int irq, void __iomem *base_address, + const char *name, unsigned int id, + const struct ad7606_bus_ops *bops); +int ad7606_remove(struct device *dev, int irq); enum ad7606_supported_device_ids { ID_AD7606_8, @@ -97,9 +68,6 @@ enum ad7606_supported_device_ids { ID_AD7606_4 }; -int ad7606_register_ring_funcs_and_init(struct iio_dev *indio_dev); -void ad7606_ring_cleanup(struct iio_dev *indio_dev); - #ifdef CONFIG_PM_SLEEP extern const struct dev_pm_ops ad7606_pm_ops; #define AD7606_PM_OPS (&ad7606_pm_ops) diff --git a/drivers/staging/iio/adc/ad7606_par.c b/drivers/staging/iio/adc/ad7606_par.c index 84d23930fdde..cd6c410c0484 100644 --- a/drivers/staging/iio/adc/ad7606_par.c +++ b/drivers/staging/iio/adc/ad7606_par.c @@ -49,8 +49,8 @@ static const struct ad7606_bus_ops ad7606_par8_bops = { static int ad7606_par_probe(struct platform_device *pdev) { + const struct platform_device_id *id = platform_get_device_id(pdev); struct resource *res; - struct iio_dev *indio_dev; void __iomem *addr; resource_size_t remap_size; int irq; @@ -68,26 +68,15 @@ static int ad7606_par_probe(struct platform_device *pdev) remap_size = resource_size(res); - indio_dev = ad7606_probe(&pdev->dev, irq, addr, - platform_get_device_id(pdev)->driver_data, - remap_size > 1 ? &ad7606_par16_bops : - &ad7606_par8_bops); - - if (IS_ERR(indio_dev)) - return PTR_ERR(indio_dev); - - platform_set_drvdata(pdev, indio_dev); - - return 0; + return ad7606_probe(&pdev->dev, irq, addr, + id->name, id->driver_data, + remap_size > 1 ? &ad7606_par16_bops : + &ad7606_par8_bops); } static int ad7606_par_remove(struct platform_device *pdev) { - struct iio_dev *indio_dev = platform_get_drvdata(pdev); - - ad7606_remove(indio_dev, platform_get_irq(pdev, 0)); - - return 0; + return ad7606_remove(&pdev->dev, platform_get_irq(pdev, 0)); } static const struct platform_device_id ad7606_driver_ids[] = { diff --git a/drivers/staging/iio/adc/ad7606_ring.c b/drivers/staging/iio/adc/ad7606_ring.c deleted file mode 100644 index 0572df9aad85..000000000000 --- a/drivers/staging/iio/adc/ad7606_ring.c +++ /dev/null @@ -1,102 +0,0 @@ -/* - * Copyright 2011-2012 Analog Devices Inc. - * - * Licensed under the GPL-2. - * - */ - -#include <linux/interrupt.h> -#include <linux/gpio.h> -#include <linux/device.h> -#include <linux/kernel.h> -#include <linux/slab.h> - -#include <linux/iio/iio.h> -#include <linux/iio/buffer.h> -#include <linux/iio/trigger_consumer.h> -#include <linux/iio/triggered_buffer.h> - -#include "ad7606.h" - -/** - * ad7606_trigger_handler_th() th/bh of trigger launched polling to ring buffer - * - **/ -static irqreturn_t ad7606_trigger_handler_th_bh(int irq, void *p) -{ - struct iio_poll_func *pf = p; - struct ad7606_state *st = iio_priv(pf->indio_dev); - - gpio_set_value(st->pdata->gpio_convst, 1); - - return IRQ_HANDLED; -} - -/** - * ad7606_poll_bh_to_ring() bh of trigger launched polling to ring buffer - * @work_s: the work struct through which this was scheduled - * - * Currently there is no option in this driver to disable the saving of - * timestamps within the ring. - * I think the one copy of this at a time was to avoid problems if the - * trigger was set far too high and the reads then locked up the computer. - **/ -static void ad7606_poll_bh_to_ring(struct work_struct *work_s) -{ - struct ad7606_state *st = container_of(work_s, struct ad7606_state, - poll_work); - struct iio_dev *indio_dev = iio_priv_to_dev(st); - __u8 *buf; - int ret; - - buf = kzalloc(indio_dev->scan_bytes, GFP_KERNEL); - if (!buf) - return; - - if (gpio_is_valid(st->pdata->gpio_frstdata)) { - ret = st->bops->read_block(st->dev, 1, buf); - if (ret) - goto done; - if (!gpio_get_value(st->pdata->gpio_frstdata)) { - /* This should never happen. However - * some signal glitch caused by bad PCB desgin or - * electrostatic discharge, could cause an extra read - * or clock. This allows recovery. - */ - ad7606_reset(st); - goto done; - } - ret = st->bops->read_block(st->dev, - st->chip_info->num_channels - 1, buf + 2); - if (ret) - goto done; - } else { - ret = st->bops->read_block(st->dev, - st->chip_info->num_channels, buf); - if (ret) - goto done; - } - - iio_push_to_buffers_with_timestamp(indio_dev, buf, - iio_get_time_ns(indio_dev)); -done: - gpio_set_value(st->pdata->gpio_convst, 0); - iio_trigger_notify_done(indio_dev->trig); - kfree(buf); -} - -int ad7606_register_ring_funcs_and_init(struct iio_dev *indio_dev) -{ - struct ad7606_state *st = iio_priv(indio_dev); - - INIT_WORK(&st->poll_work, &ad7606_poll_bh_to_ring); - - return iio_triggered_buffer_setup(indio_dev, - &ad7606_trigger_handler_th_bh, &ad7606_trigger_handler_th_bh, - NULL); -} - -void ad7606_ring_cleanup(struct iio_dev *indio_dev) -{ - iio_triggered_buffer_cleanup(indio_dev); -} diff --git a/drivers/staging/iio/adc/ad7606_spi.c b/drivers/staging/iio/adc/ad7606_spi.c index 9587fa86dc69..c9b1f26685f4 100644 --- a/drivers/staging/iio/adc/ad7606_spi.c +++ b/drivers/staging/iio/adc/ad7606_spi.c @@ -42,25 +42,16 @@ static const struct ad7606_bus_ops ad7606_spi_bops = { static int ad7606_spi_probe(struct spi_device *spi) { - struct iio_dev *indio_dev; + const struct spi_device_id *id = spi_get_device_id(spi); - indio_dev = ad7606_probe(&spi->dev, spi->irq, NULL, - spi_get_device_id(spi)->driver_data, - &ad7606_spi_bops); - - if (IS_ERR(indio_dev)) - return PTR_ERR(indio_dev); - - spi_set_drvdata(spi, indio_dev); - - return 0; + return ad7606_probe(&spi->dev, spi->irq, NULL, + id->name, id->driver_data, + &ad7606_spi_bops); } static int ad7606_spi_remove(struct spi_device *spi) { - struct iio_dev *indio_dev = dev_get_drvdata(&spi->dev); - - return ad7606_remove(indio_dev, spi->irq); + return ad7606_remove(&spi->dev, spi->irq); } static const struct spi_device_id ad7606_id[] = { diff --git a/drivers/staging/iio/adc/ad7780.c b/drivers/staging/iio/adc/ad7780.c index c9a0c2aa602f..e14960038d3e 100644 --- a/drivers/staging/iio/adc/ad7780.c +++ b/drivers/staging/iio/adc/ad7780.c @@ -173,14 +173,16 @@ static int ad7780_probe(struct spi_device *spi) ad_sd_init(&st->sd, indio_dev, spi, &ad7780_sigma_delta_info); - st->reg = devm_regulator_get(&spi->dev, "vcc"); - if (!IS_ERR(st->reg)) { - ret = regulator_enable(st->reg); - if (ret) - return ret; - - voltage_uv = regulator_get_voltage(st->reg); + st->reg = devm_regulator_get(&spi->dev, "avdd"); + if (IS_ERR(st->reg)) + return PTR_ERR(st->reg); + + ret = regulator_enable(st->reg); + if (ret) { + dev_err(&spi->dev, "Failed to enable specified AVdd supply\n"); + return ret; } + voltage_uv = regulator_get_voltage(st->reg); st->chip_info = &ad7780_chip_info_tbl[spi_get_device_id(spi)->driver_data]; @@ -222,8 +224,7 @@ static int ad7780_probe(struct spi_device *spi) error_cleanup_buffer_and_trigger: ad_sd_cleanup_buffer_and_trigger(indio_dev); error_disable_reg: - if (!IS_ERR(st->reg)) - regulator_disable(st->reg); + regulator_disable(st->reg); return ret; } @@ -236,8 +237,7 @@ static int ad7780_remove(struct spi_device *spi) iio_device_unregister(indio_dev); ad_sd_cleanup_buffer_and_trigger(indio_dev); - if (!IS_ERR(st->reg)) - regulator_disable(st->reg); + regulator_disable(st->reg); return 0; } diff --git a/drivers/staging/iio/adc/ad7816.c b/drivers/staging/iio/adc/ad7816.c index 5e8115b01011..72551f827382 100644 --- a/drivers/staging/iio/adc/ad7816.c +++ b/drivers/staging/iio/adc/ad7816.c @@ -327,7 +327,7 @@ static struct attribute *ad7816_event_attributes[] = { NULL, }; -static struct attribute_group ad7816_event_attribute_group = { +static const struct attribute_group ad7816_event_attribute_group = { .attrs = ad7816_event_attributes, .name = "events", }; diff --git a/drivers/staging/iio/addac/adt7316.c b/drivers/staging/iio/addac/adt7316.c index 3faffe59c933..a7d90c8bac5e 100644 --- a/drivers/staging/iio/addac/adt7316.c +++ b/drivers/staging/iio/addac/adt7316.c @@ -2039,7 +2039,7 @@ static struct attribute *adt7316_event_attributes[] = { NULL, }; -static struct attribute_group adt7316_event_attribute_group = { +static const struct attribute_group adt7316_event_attribute_group = { .attrs = adt7316_event_attributes, .name = "events", }; @@ -2060,7 +2060,7 @@ static struct attribute *adt7516_event_attributes[] = { NULL, }; -static struct attribute_group adt7516_event_attribute_group = { +static const struct attribute_group adt7516_event_attribute_group = { .attrs = adt7516_event_attributes, .name = "events", }; diff --git a/drivers/staging/iio/cdc/ad7150.c b/drivers/staging/iio/cdc/ad7150.c index 5578a077fcfb..6998c3ddfb6a 100644 --- a/drivers/staging/iio/cdc/ad7150.c +++ b/drivers/staging/iio/cdc/ad7150.c @@ -562,7 +562,7 @@ static struct attribute *ad7150_event_attributes[] = { NULL, }; -static struct attribute_group ad7150_event_attribute_group = { +static const struct attribute_group ad7150_event_attribute_group = { .attrs = ad7150_event_attributes, .name = "events", }; diff --git a/drivers/staging/iio/cdc/ad7152.c b/drivers/staging/iio/cdc/ad7152.c index 485d0a5af53c..b91b50f345bd 100644 --- a/drivers/staging/iio/cdc/ad7152.c +++ b/drivers/staging/iio/cdc/ad7152.c @@ -89,6 +89,7 @@ struct ad7152_chip_info { */ u8 filter_rate_setup; u8 setup[2]; + struct mutex state_lock; /* protect hardware state */ }; static inline ssize_t ad7152_start_calib(struct device *dev, @@ -115,10 +116,10 @@ static inline ssize_t ad7152_start_calib(struct device *dev, else regval |= AD7152_CONF_CH2EN; - mutex_lock(&indio_dev->mlock); + mutex_lock(&chip->state_lock); ret = i2c_smbus_write_byte_data(chip->client, AD7152_REG_CFG, regval); if (ret < 0) { - mutex_unlock(&indio_dev->mlock); + mutex_unlock(&chip->state_lock); return ret; } @@ -126,14 +127,15 @@ static inline ssize_t ad7152_start_calib(struct device *dev, mdelay(20); ret = i2c_smbus_read_byte_data(chip->client, AD7152_REG_CFG); if (ret < 0) { - mutex_unlock(&indio_dev->mlock); + mutex_unlock(&chip->state_lock); return ret; } } while ((ret == regval) && timeout--); - mutex_unlock(&indio_dev->mlock); + mutex_unlock(&chip->state_lock); return len; } + static ssize_t ad7152_start_offset_calib(struct device *dev, struct device_attribute *attr, const char *buf, @@ -142,6 +144,7 @@ static ssize_t ad7152_start_offset_calib(struct device *dev, return ad7152_start_calib(dev, attr, buf, len, AD7152_CONF_MODE_OFFS_CAL); } + static ssize_t ad7152_start_gain_calib(struct device *dev, struct device_attribute *attr, const char *buf, @@ -165,63 +168,12 @@ static const unsigned char ad7152_filter_rate_table[][2] = { {200, 5 + 1}, {50, 20 + 1}, {20, 50 + 1}, {17, 60 + 1}, }; -static ssize_t ad7152_show_filter_rate_setup(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct ad7152_chip_info *chip = iio_priv(indio_dev); - - return sprintf(buf, "%d\n", - ad7152_filter_rate_table[chip->filter_rate_setup][0]); -} - -static ssize_t ad7152_store_filter_rate_setup(struct device *dev, - struct device_attribute *attr, - const char *buf, - size_t len) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct ad7152_chip_info *chip = iio_priv(indio_dev); - u8 data; - int ret, i; - - ret = kstrtou8(buf, 10, &data); - if (ret < 0) - return ret; - - for (i = 0; i < ARRAY_SIZE(ad7152_filter_rate_table); i++) - if (data >= ad7152_filter_rate_table[i][0]) - break; - - if (i >= ARRAY_SIZE(ad7152_filter_rate_table)) - i = ARRAY_SIZE(ad7152_filter_rate_table) - 1; - - mutex_lock(&indio_dev->mlock); - ret = i2c_smbus_write_byte_data(chip->client, - AD7152_REG_CFG2, AD7152_CFG2_OSR(i)); - if (ret < 0) { - mutex_unlock(&indio_dev->mlock); - return ret; - } - - chip->filter_rate_setup = i; - mutex_unlock(&indio_dev->mlock); - - return len; -} - -static IIO_DEV_ATTR_SAMP_FREQ(S_IRUGO | S_IWUSR, - ad7152_show_filter_rate_setup, - ad7152_store_filter_rate_setup); - static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("200 50 20 17"); static IIO_CONST_ATTR(in_capacitance_scale_available, "0.000061050 0.000030525 0.000015263 0.000007631"); static struct attribute *ad7152_attributes[] = { - &iio_dev_attr_sampling_frequency.dev_attr.attr, &iio_dev_attr_in_capacitance0_calibbias_calibration.dev_attr.attr, &iio_dev_attr_in_capacitance1_calibbias_calibration.dev_attr.attr, &iio_dev_attr_in_capacitance0_calibscale_calibration.dev_attr.attr, @@ -247,6 +199,51 @@ static const int ad7152_scale_table[] = { 30525, 7631, 15263, 61050 }; +/** + * read_raw handler for IIO_CHAN_INFO_SAMP_FREQ + * + * lock must be held + **/ +static int ad7152_read_raw_samp_freq(struct device *dev, int *val) +{ + struct ad7152_chip_info *chip = iio_priv(dev_to_iio_dev(dev)); + + *val = ad7152_filter_rate_table[chip->filter_rate_setup][0]; + + return 0; +} + +/** + * write_raw handler for IIO_CHAN_INFO_SAMP_FREQ + * + * lock must be held + **/ +static int ad7152_write_raw_samp_freq(struct device *dev, int val) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct ad7152_chip_info *chip = iio_priv(indio_dev); + int ret, i; + + for (i = 0; i < ARRAY_SIZE(ad7152_filter_rate_table); i++) + if (val >= ad7152_filter_rate_table[i][0]) + break; + + if (i >= ARRAY_SIZE(ad7152_filter_rate_table)) + i = ARRAY_SIZE(ad7152_filter_rate_table) - 1; + + mutex_lock(&chip->state_lock); + ret = i2c_smbus_write_byte_data(chip->client, + AD7152_REG_CFG2, AD7152_CFG2_OSR(i)); + if (ret < 0) { + mutex_unlock(&chip->state_lock); + return ret; + } + + chip->filter_rate_setup = i; + mutex_unlock(&chip->state_lock); + + return ret; +} static int ad7152_write_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int val, @@ -256,7 +253,7 @@ static int ad7152_write_raw(struct iio_dev *indio_dev, struct ad7152_chip_info *chip = iio_priv(indio_dev); int ret, i; - mutex_lock(&indio_dev->mlock); + mutex_lock(&chip->state_lock); switch (mask) { case IIO_CHAN_INFO_CALIBSCALE: @@ -309,14 +306,26 @@ static int ad7152_write_raw(struct iio_dev *indio_dev, ret = 0; break; + case IIO_CHAN_INFO_SAMP_FREQ: + if (val2) { + ret = -EINVAL; + goto out; + } + ret = ad7152_write_raw_samp_freq(&indio_dev->dev, val); + if (ret < 0) + goto out; + + ret = 0; + break; default: ret = -EINVAL; } out: - mutex_unlock(&indio_dev->mlock); + mutex_unlock(&chip->state_lock); return ret; } + static int ad7152_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int *val, int *val2, @@ -326,7 +335,7 @@ static int ad7152_read_raw(struct iio_dev *indio_dev, int ret; u8 regval = 0; - mutex_lock(&indio_dev->mlock); + mutex_lock(&chip->state_lock); switch (mask) { case IIO_CHAN_INFO_RAW: @@ -403,11 +412,18 @@ static int ad7152_read_raw(struct iio_dev *indio_dev, ret = IIO_VAL_INT_PLUS_NANO; break; + case IIO_CHAN_INFO_SAMP_FREQ: + ret = ad7152_read_raw_samp_freq(&indio_dev->dev, val); + if (ret < 0) + goto out; + + ret = IIO_VAL_INT; + break; default: ret = -EINVAL; } out: - mutex_unlock(&indio_dev->mlock); + mutex_unlock(&chip->state_lock); return ret; } @@ -440,6 +456,7 @@ static const struct iio_chan_spec ad7152_channels[] = { BIT(IIO_CHAN_INFO_CALIBSCALE) | BIT(IIO_CHAN_INFO_CALIBBIAS) | BIT(IIO_CHAN_INFO_SCALE), + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), }, { .type = IIO_CAPACITANCE, .differential = 1, @@ -450,6 +467,7 @@ static const struct iio_chan_spec ad7152_channels[] = { BIT(IIO_CHAN_INFO_CALIBSCALE) | BIT(IIO_CHAN_INFO_CALIBBIAS) | BIT(IIO_CHAN_INFO_SCALE), + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), }, { .type = IIO_CAPACITANCE, .indexed = 1, @@ -458,6 +476,7 @@ static const struct iio_chan_spec ad7152_channels[] = { BIT(IIO_CHAN_INFO_CALIBSCALE) | BIT(IIO_CHAN_INFO_CALIBBIAS) | BIT(IIO_CHAN_INFO_SCALE), + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), }, { .type = IIO_CAPACITANCE, .differential = 1, @@ -468,8 +487,10 @@ static const struct iio_chan_spec ad7152_channels[] = { BIT(IIO_CHAN_INFO_CALIBSCALE) | BIT(IIO_CHAN_INFO_CALIBBIAS) | BIT(IIO_CHAN_INFO_SCALE), + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), } }; + /* * device probe and remove */ @@ -489,6 +510,7 @@ static int ad7152_probe(struct i2c_client *client, i2c_set_clientdata(client, indio_dev); chip->client = client; + mutex_init(&chip->state_lock); /* Establish that the iio_dev is a child of the i2c device */ indio_dev->name = id->name; diff --git a/drivers/staging/iio/cdc/ad7746.c b/drivers/staging/iio/cdc/ad7746.c index 5771d4ee8ef1..81f8b9ee1120 100644 --- a/drivers/staging/iio/cdc/ad7746.c +++ b/drivers/staging/iio/cdc/ad7746.c @@ -70,8 +70,10 @@ #define AD7746_EXCSETUP_EXCLVL(x) (((x) & 0x3) << 0) /* Config Register Bit Designations (AD7746_REG_CFG) */ -#define AD7746_CONF_VTFS(x) ((x) << 6) -#define AD7746_CONF_CAPFS(x) ((x) << 3) +#define AD7746_CONF_VTFS_SHIFT 6 +#define AD7746_CONF_CAPFS_SHIFT 3 +#define AD7746_CONF_VTFS_MASK GENMASK(7, 6) +#define AD7746_CONF_CAPFS_MASK GENMASK(5, 3) #define AD7746_CONF_MODE_IDLE (0 << 0) #define AD7746_CONF_MODE_CONT_CONV (1 << 0) #define AD7746_CONF_MODE_SINGLE_CONV (2 << 0) @@ -122,7 +124,8 @@ static const struct iio_chan_spec ad7746_channels[] = { .indexed = 1, .channel = 0, .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_SAMP_FREQ), .address = AD7746_REG_VT_DATA_HIGH << 8 | AD7746_VTSETUP_VTMD_EXT_VIN, }, @@ -132,7 +135,8 @@ static const struct iio_chan_spec ad7746_channels[] = { .channel = 1, .extend_name = "supply", .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_SAMP_FREQ), .address = AD7746_REG_VT_DATA_HIGH << 8 | AD7746_VTSETUP_VTMD_VDD_MON, }, @@ -159,7 +163,7 @@ static const struct iio_chan_spec ad7746_channels[] = { .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_CALIBSCALE) | BIT(IIO_CHAN_INFO_OFFSET), .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_CALIBBIAS) | - BIT(IIO_CHAN_INFO_SCALE), + BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_SAMP_FREQ), .address = AD7746_REG_CAP_DATA_HIGH << 8, }, [CIN1_DIFF] = { @@ -171,7 +175,7 @@ static const struct iio_chan_spec ad7746_channels[] = { .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_CALIBSCALE) | BIT(IIO_CHAN_INFO_OFFSET), .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_CALIBBIAS) | - BIT(IIO_CHAN_INFO_SCALE), + BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_SAMP_FREQ), .address = AD7746_REG_CAP_DATA_HIGH << 8 | AD7746_CAPSETUP_CAPDIFF }, @@ -182,7 +186,7 @@ static const struct iio_chan_spec ad7746_channels[] = { .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_CALIBSCALE) | BIT(IIO_CHAN_INFO_OFFSET), .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_CALIBBIAS) | - BIT(IIO_CHAN_INFO_SCALE), + BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_SAMP_FREQ), .address = AD7746_REG_CAP_DATA_HIGH << 8 | AD7746_CAPSETUP_CIN2, }, @@ -195,7 +199,7 @@ static const struct iio_chan_spec ad7746_channels[] = { .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_CALIBSCALE) | BIT(IIO_CHAN_INFO_OFFSET), .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_CALIBBIAS) | - BIT(IIO_CHAN_INFO_SCALE), + BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_SAMP_FREQ), .address = AD7746_REG_CAP_DATA_HIGH << 8 | AD7746_CAPSETUP_CAPDIFF | AD7746_CAPSETUP_CIN2, } @@ -215,15 +219,16 @@ static int ad7746_select_channel(struct iio_dev *indio_dev, struct iio_chan_spec const *chan) { struct ad7746_chip_info *chip = iio_priv(indio_dev); - int ret, delay; + int ret, delay, idx; u8 vt_setup, cap_setup; switch (chan->type) { case IIO_CAPACITANCE: cap_setup = (chan->address & 0xFF) | AD7746_CAPSETUP_CAPEN; vt_setup = chip->vt_setup & ~AD7746_VTSETUP_VTEN; - delay = ad7746_cap_filter_rate_table[(chip->config >> 3) & - 0x7][1]; + idx = (chip->config & AD7746_CONF_CAPFS_MASK) >> + AD7746_CONF_CAPFS_SHIFT; + delay = ad7746_cap_filter_rate_table[idx][1]; if (chip->capdac_set != chan->channel) { ret = i2c_smbus_write_byte_data(chip->client, @@ -244,8 +249,9 @@ static int ad7746_select_channel(struct iio_dev *indio_dev, case IIO_TEMP: vt_setup = (chan->address & 0xFF) | AD7746_VTSETUP_VTEN; cap_setup = chip->cap_setup & ~AD7746_CAPSETUP_CAPEN; - delay = ad7746_cap_filter_rate_table[(chip->config >> 6) & - 0x3][1]; + idx = (chip->config & AD7746_CONF_VTFS_MASK) >> + AD7746_CONF_VTFS_SHIFT; + delay = ad7746_cap_filter_rate_table[idx][1]; break; default: return -EINVAL; @@ -355,101 +361,47 @@ static IIO_DEVICE_ATTR(in_capacitance1_calibscale_calibration, static IIO_DEVICE_ATTR(in_voltage0_calibscale_calibration, S_IWUSR, NULL, ad7746_start_gain_calib, VIN); -static ssize_t ad7746_show_cap_filter_rate_setup(struct device *dev, - struct device_attribute *attr, - char *buf) +static int ad7746_store_cap_filter_rate_setup(struct ad7746_chip_info *chip, + int val) { - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct ad7746_chip_info *chip = iio_priv(indio_dev); - - return sprintf(buf, "%d\n", ad7746_cap_filter_rate_table[ - (chip->config >> 3) & 0x7][0]); -} - -static ssize_t ad7746_store_cap_filter_rate_setup(struct device *dev, - struct device_attribute *attr, - const char *buf, - size_t len) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct ad7746_chip_info *chip = iio_priv(indio_dev); - u8 data; - int ret, i; - - ret = kstrtou8(buf, 10, &data); - if (ret < 0) - return ret; + int i; for (i = 0; i < ARRAY_SIZE(ad7746_cap_filter_rate_table); i++) - if (data >= ad7746_cap_filter_rate_table[i][0]) + if (val >= ad7746_cap_filter_rate_table[i][0]) break; if (i >= ARRAY_SIZE(ad7746_cap_filter_rate_table)) i = ARRAY_SIZE(ad7746_cap_filter_rate_table) - 1; - mutex_lock(&indio_dev->mlock); - chip->config &= ~AD7746_CONF_CAPFS(0x7); - chip->config |= AD7746_CONF_CAPFS(i); - mutex_unlock(&indio_dev->mlock); + chip->config &= ~AD7746_CONF_CAPFS_MASK; + chip->config |= i << AD7746_CONF_CAPFS_SHIFT; - return len; + return 0; } -static ssize_t ad7746_show_vt_filter_rate_setup(struct device *dev, - struct device_attribute *attr, - char *buf) +static int ad7746_store_vt_filter_rate_setup(struct ad7746_chip_info *chip, + int val) { - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct ad7746_chip_info *chip = iio_priv(indio_dev); - - return sprintf(buf, "%d\n", ad7746_vt_filter_rate_table[ - (chip->config >> 6) & 0x3][0]); -} - -static ssize_t ad7746_store_vt_filter_rate_setup(struct device *dev, - struct device_attribute *attr, - const char *buf, - size_t len) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct ad7746_chip_info *chip = iio_priv(indio_dev); - u8 data; - int ret, i; - - ret = kstrtou8(buf, 10, &data); - if (ret < 0) - return ret; + int i; for (i = 0; i < ARRAY_SIZE(ad7746_vt_filter_rate_table); i++) - if (data >= ad7746_vt_filter_rate_table[i][0]) + if (val >= ad7746_vt_filter_rate_table[i][0]) break; if (i >= ARRAY_SIZE(ad7746_vt_filter_rate_table)) i = ARRAY_SIZE(ad7746_vt_filter_rate_table) - 1; - mutex_lock(&indio_dev->mlock); - chip->config &= ~AD7746_CONF_VTFS(0x3); - chip->config |= AD7746_CONF_VTFS(i); - mutex_unlock(&indio_dev->mlock); + chip->config &= ~AD7746_CONF_VTFS_MASK; + chip->config |= i << AD7746_CONF_VTFS_SHIFT; - return len; + return 0; } -static IIO_DEVICE_ATTR(in_capacitance_sampling_frequency, - S_IRUGO | S_IWUSR, ad7746_show_cap_filter_rate_setup, - ad7746_store_cap_filter_rate_setup, 0); - -static IIO_DEVICE_ATTR(in_voltage_sampling_frequency, - S_IRUGO | S_IWUSR, ad7746_show_vt_filter_rate_setup, - ad7746_store_vt_filter_rate_setup, 0); - static IIO_CONST_ATTR(in_voltage_sampling_frequency_available, "50 31 16 8"); static IIO_CONST_ATTR(in_capacitance_sampling_frequency_available, "91 84 50 26 16 13 11 9"); static struct attribute *ad7746_attributes[] = { - &iio_dev_attr_in_capacitance_sampling_frequency.dev_attr.attr, - &iio_dev_attr_in_voltage_sampling_frequency.dev_attr.attr, &iio_dev_attr_in_capacitance0_calibbias_calibration.dev_attr.attr, &iio_dev_attr_in_capacitance0_calibscale_calibration.dev_attr.attr, &iio_dev_attr_in_capacitance1_calibscale_calibration.dev_attr.attr, @@ -547,6 +499,23 @@ static int ad7746_write_raw(struct iio_dev *indio_dev, ret = 0; break; + case IIO_CHAN_INFO_SAMP_FREQ: + if (val2) { + ret = -EINVAL; + goto out; + } + + switch (chan->type) { + case IIO_CAPACITANCE: + ret = ad7746_store_cap_filter_rate_setup(chip, val); + break; + case IIO_VOLTAGE: + ret = ad7746_store_vt_filter_rate_setup(chip, val); + break; + default: + ret = -EINVAL; + } + break; default: ret = -EINVAL; } @@ -562,7 +531,7 @@ static int ad7746_read_raw(struct iio_dev *indio_dev, long mask) { struct ad7746_chip_info *chip = iio_priv(indio_dev); - int ret, delay; + int ret, delay, idx; u8 regval, reg; mutex_lock(&indio_dev->mlock); @@ -667,6 +636,24 @@ static int ad7746_read_raw(struct iio_dev *indio_dev, } break; + case IIO_CHAN_INFO_SAMP_FREQ: + switch (chan->type) { + case IIO_CAPACITANCE: + idx = (chip->config & AD7746_CONF_CAPFS_MASK) >> + AD7746_CONF_CAPFS_SHIFT; + *val = ad7746_cap_filter_rate_table[idx][0]; + ret = IIO_VAL_INT; + break; + case IIO_VOLTAGE: + idx = (chip->config & AD7746_CONF_VTFS_MASK) >> + AD7746_CONF_VTFS_SHIFT; + *val = ad7746_vt_filter_rate_table[idx][0]; + ret = IIO_VAL_INT; + break; + default: + ret = -EINVAL; + } + break; default: ret = -EINVAL; } diff --git a/drivers/staging/iio/frequency/ad9832.c b/drivers/staging/iio/frequency/ad9832.c index 358400b22d33..a5b2f068168d 100644 --- a/drivers/staging/iio/frequency/ad9832.c +++ b/drivers/staging/iio/frequency/ad9832.c @@ -204,7 +204,6 @@ static int ad9832_probe(struct spi_device *spi) struct ad9832_platform_data *pdata = dev_get_platdata(&spi->dev); struct iio_dev *indio_dev; struct ad9832_state *st; - struct regulator *reg; int ret; if (!pdata) { @@ -212,21 +211,35 @@ static int ad9832_probe(struct spi_device *spi) return -ENODEV; } - reg = devm_regulator_get(&spi->dev, "vcc"); - if (!IS_ERR(reg)) { - ret = regulator_enable(reg); - if (ret) - return ret; - } - indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); - if (!indio_dev) { - ret = -ENOMEM; - goto error_disable_reg; - } + if (!indio_dev) + return -ENOMEM; + spi_set_drvdata(spi, indio_dev); st = iio_priv(indio_dev); - st->reg = reg; + + st->avdd = devm_regulator_get(&spi->dev, "avdd"); + if (IS_ERR(st->avdd)) + return PTR_ERR(st->avdd); + + ret = regulator_enable(st->avdd); + if (ret) { + dev_err(&spi->dev, "Failed to enable specified AVDD supply\n"); + return ret; + } + + st->dvdd = devm_regulator_get(&spi->dev, "dvdd"); + if (IS_ERR(st->dvdd)) { + ret = PTR_ERR(st->dvdd); + goto error_disable_avdd; + } + + ret = regulator_enable(st->dvdd); + if (ret) { + dev_err(&spi->dev, "Failed to enable specified DVDD supply\n"); + goto error_disable_avdd; + } + st->mclk = pdata->mclk; st->spi = spi; @@ -277,42 +290,43 @@ static int ad9832_probe(struct spi_device *spi) ret = spi_sync(st->spi, &st->msg); if (ret) { dev_err(&spi->dev, "device init failed\n"); - goto error_disable_reg; + goto error_disable_dvdd; } ret = ad9832_write_frequency(st, AD9832_FREQ0HM, pdata->freq0); if (ret) - goto error_disable_reg; + goto error_disable_dvdd; ret = ad9832_write_frequency(st, AD9832_FREQ1HM, pdata->freq1); if (ret) - goto error_disable_reg; + goto error_disable_dvdd; ret = ad9832_write_phase(st, AD9832_PHASE0H, pdata->phase0); if (ret) - goto error_disable_reg; + goto error_disable_dvdd; ret = ad9832_write_phase(st, AD9832_PHASE1H, pdata->phase1); if (ret) - goto error_disable_reg; + goto error_disable_dvdd; ret = ad9832_write_phase(st, AD9832_PHASE2H, pdata->phase2); if (ret) - goto error_disable_reg; + goto error_disable_dvdd; ret = ad9832_write_phase(st, AD9832_PHASE3H, pdata->phase3); if (ret) - goto error_disable_reg; + goto error_disable_dvdd; ret = iio_device_register(indio_dev); if (ret) - goto error_disable_reg; + goto error_disable_dvdd; return 0; -error_disable_reg: - if (!IS_ERR(reg)) - regulator_disable(reg); +error_disable_dvdd: + regulator_disable(st->dvdd); +error_disable_avdd: + regulator_disable(st->avdd); return ret; } @@ -323,8 +337,8 @@ static int ad9832_remove(struct spi_device *spi) struct ad9832_state *st = iio_priv(indio_dev); iio_device_unregister(indio_dev); - if (!IS_ERR(st->reg)) - regulator_disable(st->reg); + regulator_disable(st->dvdd); + regulator_disable(st->avdd); return 0; } diff --git a/drivers/staging/iio/frequency/ad9832.h b/drivers/staging/iio/frequency/ad9832.h index d32323b46be6..1b08b04482a4 100644 --- a/drivers/staging/iio/frequency/ad9832.h +++ b/drivers/staging/iio/frequency/ad9832.h @@ -58,7 +58,8 @@ /** * struct ad9832_state - driver instance specific data * @spi: spi_device - * @reg: supply regulator + * @avdd: supply regulator for the analog section + * @dvdd: supply regulator for the digital section * @mclk: external master clock * @ctrl_fp: cached frequency/phase control word * @ctrl_ss: cached sync/selsrc control word @@ -76,7 +77,8 @@ struct ad9832_state { struct spi_device *spi; - struct regulator *reg; + struct regulator *avdd; + struct regulator *dvdd; unsigned long mclk; unsigned short ctrl_fp; unsigned short ctrl_ss; diff --git a/drivers/staging/iio/frequency/ad9834.c b/drivers/staging/iio/frequency/ad9834.c index 6366216e4f37..19216af1dfc9 100644 --- a/drivers/staging/iio/frequency/ad9834.c +++ b/drivers/staging/iio/frequency/ad9834.c @@ -329,11 +329,14 @@ static int ad9834_probe(struct spi_device *spi) return -ENODEV; } - reg = devm_regulator_get(&spi->dev, "vcc"); - if (!IS_ERR(reg)) { - ret = regulator_enable(reg); - if (ret) - return ret; + reg = devm_regulator_get(&spi->dev, "avdd"); + if (IS_ERR(reg)) + return PTR_ERR(reg); + + ret = regulator_enable(reg); + if (ret) { + dev_err(&spi->dev, "Failed to enable specified AVDD supply\n"); + return ret; } indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); @@ -416,8 +419,7 @@ static int ad9834_probe(struct spi_device *spi) return 0; error_disable_reg: - if (!IS_ERR(reg)) - regulator_disable(reg); + regulator_disable(reg); return ret; } @@ -428,8 +430,7 @@ static int ad9834_remove(struct spi_device *spi) struct ad9834_state *st = iio_priv(indio_dev); iio_device_unregister(indio_dev); - if (!IS_ERR(st->reg)) - regulator_disable(st->reg); + regulator_disable(st->reg); return 0; } diff --git a/drivers/staging/iio/impedance-analyzer/ad5933.c b/drivers/staging/iio/impedance-analyzer/ad5933.c index 5eecf1cb1028..944789843938 100644 --- a/drivers/staging/iio/impedance-analyzer/ad5933.c +++ b/drivers/staging/iio/impedance-analyzer/ad5933.c @@ -655,6 +655,7 @@ static void ad5933_work(struct work_struct *work) __be16 buf[2]; int val[2]; unsigned char status; + int ret; mutex_lock(&indio_dev->mlock); if (st->state == AD5933_CTRL_INIT_START_FREQ) { @@ -662,19 +663,22 @@ static void ad5933_work(struct work_struct *work) ad5933_cmd(st, AD5933_CTRL_START_SWEEP); st->state = AD5933_CTRL_START_SWEEP; schedule_delayed_work(&st->work, st->poll_time_jiffies); - mutex_unlock(&indio_dev->mlock); - return; + goto out; } - ad5933_i2c_read(st->client, AD5933_REG_STATUS, 1, &status); + ret = ad5933_i2c_read(st->client, AD5933_REG_STATUS, 1, &status); + if (ret) + goto out; if (status & AD5933_STAT_DATA_VALID) { int scan_count = bitmap_weight(indio_dev->active_scan_mask, indio_dev->masklength); - ad5933_i2c_read(st->client, + ret = ad5933_i2c_read(st->client, test_bit(1, indio_dev->active_scan_mask) ? AD5933_REG_REAL_DATA : AD5933_REG_IMAG_DATA, scan_count * 2, (u8 *)buf); + if (ret) + goto out; if (scan_count == 2) { val[0] = be16_to_cpu(buf[0]); @@ -686,8 +690,7 @@ static void ad5933_work(struct work_struct *work) } else { /* no data available - try again later */ schedule_delayed_work(&st->work, st->poll_time_jiffies); - mutex_unlock(&indio_dev->mlock); - return; + goto out; } if (status & AD5933_STAT_SWEEP_DONE) { @@ -700,7 +703,7 @@ static void ad5933_work(struct work_struct *work) ad5933_cmd(st, AD5933_CTRL_INC_FREQ); schedule_delayed_work(&st->work, st->poll_time_jiffies); } - +out: mutex_unlock(&indio_dev->mlock); } @@ -723,13 +726,16 @@ static int ad5933_probe(struct i2c_client *client, if (!pdata) pdata = &ad5933_default_pdata; - st->reg = devm_regulator_get(&client->dev, "vcc"); - if (!IS_ERR(st->reg)) { - ret = regulator_enable(st->reg); - if (ret) - return ret; - voltage_uv = regulator_get_voltage(st->reg); + st->reg = devm_regulator_get(&client->dev, "vdd"); + if (IS_ERR(st->reg)) + return PTR_ERR(st->reg); + + ret = regulator_enable(st->reg); + if (ret) { + dev_err(&client->dev, "Failed to enable specified VDD supply\n"); + return ret; } + voltage_uv = regulator_get_voltage(st->reg); if (voltage_uv) st->vref_mv = voltage_uv / 1000; @@ -772,8 +778,7 @@ static int ad5933_probe(struct i2c_client *client, error_unreg_ring: iio_kfifo_free(indio_dev->buffer); error_disable_reg: - if (!IS_ERR(st->reg)) - regulator_disable(st->reg); + regulator_disable(st->reg); return ret; } @@ -785,8 +790,7 @@ static int ad5933_remove(struct i2c_client *client) iio_device_unregister(indio_dev); iio_kfifo_free(indio_dev->buffer); - if (!IS_ERR(st->reg)) - regulator_disable(st->reg); + regulator_disable(st->reg); return 0; } diff --git a/drivers/staging/iio/light/Kconfig b/drivers/staging/iio/light/Kconfig index ca8d6e66c899..4fbf6298c0f3 100644 --- a/drivers/staging/iio/light/Kconfig +++ b/drivers/staging/iio/light/Kconfig @@ -3,18 +3,6 @@ # menu "Light sensors" -config SENSORS_ISL29018 - tristate "ISL 29018 light and proximity sensor" - depends on I2C - select REGMAP_I2C - default n - help - If you say yes here you get support for ambient light sensing and - proximity infrared sensing from Intersil ISL29018. - This driver will provide the measurements of ambient light intensity - in lux, proximity infrared sensing and normal infrared sensing. - Data from sensor is accessible via sysfs. - config SENSORS_ISL29028 tristate "Intersil ISL29028 Concurrent Light and Proximity Sensor" depends on I2C @@ -25,13 +13,6 @@ config SENSORS_ISL29028 Proximity value via iio. The ISL29028 provides the concurrent sensing of ambient light and proximity. -config TSL2583 - tristate "TAOS TSL2580, TSL2581 and TSL2583 light-to-digital converters" - depends on I2C - help - Provides support for the TAOS tsl2580, tsl2581 and tsl2583 devices. - Access ALS data via iio, sysfs. - config TSL2x7x tristate "TAOS TSL/TMD2x71 and TSL/TMD2x72 Family of light and proximity sensors" depends on I2C diff --git a/drivers/staging/iio/light/Makefile b/drivers/staging/iio/light/Makefile index 9960fdf7c15b..f8693e9fdc94 100644 --- a/drivers/staging/iio/light/Makefile +++ b/drivers/staging/iio/light/Makefile @@ -2,7 +2,5 @@ # Makefile for industrial I/O Light sensors # -obj-$(CONFIG_SENSORS_ISL29018) += isl29018.o obj-$(CONFIG_SENSORS_ISL29028) += isl29028.o -obj-$(CONFIG_TSL2583) += tsl2583.o obj-$(CONFIG_TSL2x7x) += tsl2x7x_core.o diff --git a/drivers/staging/iio/light/isl29018.c b/drivers/staging/iio/light/isl29018.c deleted file mode 100644 index a767a43c995c..000000000000 --- a/drivers/staging/iio/light/isl29018.c +++ /dev/null @@ -1,834 +0,0 @@ -/* - * A iio driver for the light sensor ISL 29018/29023/29035. - * - * IIO driver for monitoring ambient light intensity in luxi, proximity - * sensing and infrared sensing. - * - * Copyright (c) 2010, NVIDIA Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - */ - -#include <linux/module.h> -#include <linux/i2c.h> -#include <linux/err.h> -#include <linux/mutex.h> -#include <linux/delay.h> -#include <linux/regmap.h> -#include <linux/slab.h> -#include <linux/iio/iio.h> -#include <linux/iio/sysfs.h> -#include <linux/acpi.h> - -#define ISL29018_CONV_TIME_MS 100 - -#define ISL29018_REG_ADD_COMMAND1 0x00 -#define ISL29018_CMD1_OPMODE_SHIFT 5 -#define ISL29018_CMD1_OPMODE_MASK (7 << ISL29018_CMD1_OPMODE_SHIFT) -#define ISL29018_CMD1_OPMODE_POWER_DOWN 0 -#define ISL29018_CMD1_OPMODE_ALS_ONCE 1 -#define ISL29018_CMD1_OPMODE_IR_ONCE 2 -#define ISL29018_CMD1_OPMODE_PROX_ONCE 3 - -#define ISL29018_REG_ADD_COMMAND2 0x01 -#define ISL29018_CMD2_RESOLUTION_SHIFT 2 -#define ISL29018_CMD2_RESOLUTION_MASK (0x3 << ISL29018_CMD2_RESOLUTION_SHIFT) - -#define ISL29018_CMD2_RANGE_SHIFT 0 -#define ISL29018_CMD2_RANGE_MASK (0x3 << ISL29018_CMD2_RANGE_SHIFT) - -#define ISL29018_CMD2_SCHEME_SHIFT 7 -#define ISL29018_CMD2_SCHEME_MASK (0x1 << ISL29018_CMD2_SCHEME_SHIFT) - -#define ISL29018_REG_ADD_DATA_LSB 0x02 -#define ISL29018_REG_ADD_DATA_MSB 0x03 - -#define ISL29018_REG_TEST 0x08 -#define ISL29018_TEST_SHIFT 0 -#define ISL29018_TEST_MASK (0xFF << ISL29018_TEST_SHIFT) - -#define ISL29035_REG_DEVICE_ID 0x0F -#define ISL29035_DEVICE_ID_SHIFT 0x03 -#define ISL29035_DEVICE_ID_MASK (0x7 << ISL29035_DEVICE_ID_SHIFT) -#define ISL29035_DEVICE_ID 0x5 -#define ISL29035_BOUT_SHIFT 0x07 -#define ISL29035_BOUT_MASK (0x01 << ISL29035_BOUT_SHIFT) - -#define ISL29018_INT_TIME_AVAIL "0.090000 0.005630 0.000351 0.000021" -#define ISL29023_INT_TIME_AVAIL "0.090000 0.005600 0.000352 0.000022" -#define ISL29035_INT_TIME_AVAIL "0.105000 0.006500 0.000410 0.000025" - -static const char * const int_time_avail[] = { - ISL29018_INT_TIME_AVAIL, - ISL29023_INT_TIME_AVAIL, - ISL29035_INT_TIME_AVAIL, -}; - -enum isl29018_int_time { - ISL29018_INT_TIME_16, - ISL29018_INT_TIME_12, - ISL29018_INT_TIME_8, - ISL29018_INT_TIME_4, -}; - -static const unsigned int isl29018_int_utimes[3][4] = { - {90000, 5630, 351, 21}, - {90000, 5600, 352, 22}, - {105000, 6500, 410, 25}, -}; - -static const struct isl29018_scale { - unsigned int scale; - unsigned int uscale; -} isl29018_scales[4][4] = { - { {0, 15258}, {0, 61035}, {0, 244140}, {0, 976562} }, - { {0, 244140}, {0, 976562}, {3, 906250}, {15, 625000} }, - { {3, 906250}, {15, 625000}, {62, 500000}, {250, 0} }, - { {62, 500000}, {250, 0}, {1000, 0}, {4000, 0} } -}; - -struct isl29018_chip { - struct regmap *regmap; - struct mutex lock; - int type; - unsigned int calibscale; - unsigned int ucalibscale; - unsigned int int_time; - struct isl29018_scale scale; - int prox_scheme; - bool suspended; -}; - -static int isl29018_set_integration_time(struct isl29018_chip *chip, - unsigned int utime) -{ - int i, ret; - unsigned int int_time, new_int_time; - - for (i = 0; i < ARRAY_SIZE(isl29018_int_utimes[chip->type]); ++i) { - if (utime == isl29018_int_utimes[chip->type][i]) { - new_int_time = i; - break; - } - } - - if (i >= ARRAY_SIZE(isl29018_int_utimes[chip->type])) - return -EINVAL; - - ret = regmap_update_bits(chip->regmap, ISL29018_REG_ADD_COMMAND2, - ISL29018_CMD2_RESOLUTION_MASK, - i << ISL29018_CMD2_RESOLUTION_SHIFT); - if (ret < 0) - return ret; - - /* Keep the same range when integration time changes */ - int_time = chip->int_time; - for (i = 0; i < ARRAY_SIZE(isl29018_scales[int_time]); ++i) { - if (chip->scale.scale == isl29018_scales[int_time][i].scale && - chip->scale.uscale == isl29018_scales[int_time][i].uscale) { - chip->scale = isl29018_scales[new_int_time][i]; - break; - } - } - chip->int_time = new_int_time; - - return 0; -} - -static int isl29018_set_scale(struct isl29018_chip *chip, int scale, int uscale) -{ - int i, ret; - struct isl29018_scale new_scale; - - for (i = 0; i < ARRAY_SIZE(isl29018_scales[chip->int_time]); ++i) { - if (scale == isl29018_scales[chip->int_time][i].scale && - uscale == isl29018_scales[chip->int_time][i].uscale) { - new_scale = isl29018_scales[chip->int_time][i]; - break; - } - } - - if (i >= ARRAY_SIZE(isl29018_scales[chip->int_time])) - return -EINVAL; - - ret = regmap_update_bits(chip->regmap, ISL29018_REG_ADD_COMMAND2, - ISL29018_CMD2_RANGE_MASK, - i << ISL29018_CMD2_RANGE_SHIFT); - if (ret < 0) - return ret; - - chip->scale = new_scale; - - return 0; -} - -static int isl29018_read_sensor_input(struct isl29018_chip *chip, int mode) -{ - int status; - unsigned int lsb; - unsigned int msb; - struct device *dev = regmap_get_device(chip->regmap); - - /* Set mode */ - status = regmap_write(chip->regmap, ISL29018_REG_ADD_COMMAND1, - mode << ISL29018_CMD1_OPMODE_SHIFT); - if (status) { - dev_err(dev, - "Error in setting operating mode err %d\n", status); - return status; - } - msleep(ISL29018_CONV_TIME_MS); - status = regmap_read(chip->regmap, ISL29018_REG_ADD_DATA_LSB, &lsb); - if (status < 0) { - dev_err(dev, - "Error in reading LSB DATA with err %d\n", status); - return status; - } - - status = regmap_read(chip->regmap, ISL29018_REG_ADD_DATA_MSB, &msb); - if (status < 0) { - dev_err(dev, - "Error in reading MSB DATA with error %d\n", status); - return status; - } - dev_vdbg(dev, "MSB 0x%x and LSB 0x%x\n", msb, lsb); - - return (msb << 8) | lsb; -} - -static int isl29018_read_lux(struct isl29018_chip *chip, int *lux) -{ - int lux_data; - unsigned int data_x_range; - - lux_data = isl29018_read_sensor_input(chip, - ISL29018_CMD1_OPMODE_ALS_ONCE); - if (lux_data < 0) - return lux_data; - - data_x_range = lux_data * chip->scale.scale + - lux_data * chip->scale.uscale / 1000000; - *lux = data_x_range * chip->calibscale + - data_x_range * chip->ucalibscale / 1000000; - - return 0; -} - -static int isl29018_read_ir(struct isl29018_chip *chip, int *ir) -{ - int ir_data; - - ir_data = isl29018_read_sensor_input(chip, - ISL29018_CMD1_OPMODE_IR_ONCE); - if (ir_data < 0) - return ir_data; - - *ir = ir_data; - - return 0; -} - -static int isl29018_read_proximity_ir(struct isl29018_chip *chip, int scheme, - int *near_ir) -{ - int status; - int prox_data = -1; - int ir_data = -1; - struct device *dev = regmap_get_device(chip->regmap); - - /* Do proximity sensing with required scheme */ - status = regmap_update_bits(chip->regmap, ISL29018_REG_ADD_COMMAND2, - ISL29018_CMD2_SCHEME_MASK, - scheme << ISL29018_CMD2_SCHEME_SHIFT); - if (status) { - dev_err(dev, "Error in setting operating mode\n"); - return status; - } - - prox_data = isl29018_read_sensor_input(chip, - ISL29018_CMD1_OPMODE_PROX_ONCE); - if (prox_data < 0) - return prox_data; - - if (scheme == 1) { - *near_ir = prox_data; - return 0; - } - - ir_data = isl29018_read_sensor_input(chip, - ISL29018_CMD1_OPMODE_IR_ONCE); - if (ir_data < 0) - return ir_data; - - if (prox_data >= ir_data) - *near_ir = prox_data - ir_data; - else - *near_ir = 0; - - return 0; -} - -static ssize_t isl29018_show_scale_available(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct isl29018_chip *chip = iio_priv(indio_dev); - int i, len = 0; - - for (i = 0; i < ARRAY_SIZE(isl29018_scales[chip->int_time]); ++i) - len += sprintf(buf + len, "%d.%06d ", - isl29018_scales[chip->int_time][i].scale, - isl29018_scales[chip->int_time][i].uscale); - - buf[len - 1] = '\n'; - - return len; -} - -static ssize_t isl29018_show_int_time_available(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct isl29018_chip *chip = iio_priv(indio_dev); - int i, len = 0; - - for (i = 0; i < ARRAY_SIZE(isl29018_int_utimes[chip->type]); ++i) - len += sprintf(buf + len, "0.%06d ", - isl29018_int_utimes[chip->type][i]); - - buf[len - 1] = '\n'; - - return len; -} - -static ssize_t isl29018_show_prox_infrared_suppression(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct isl29018_chip *chip = iio_priv(indio_dev); - - /* - * Return the "proximity scheme" i.e. if the chip does on chip - * infrared suppression (1 means perform on chip suppression) - */ - return sprintf(buf, "%d\n", chip->prox_scheme); -} - -static ssize_t isl29018_store_prox_infrared_suppression(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct isl29018_chip *chip = iio_priv(indio_dev); - int val; - - if (kstrtoint(buf, 10, &val)) - return -EINVAL; - if (!(val == 0 || val == 1)) - return -EINVAL; - - /* - * Get the "proximity scheme" i.e. if the chip does on chip - * infrared suppression (1 means perform on chip suppression) - */ - mutex_lock(&chip->lock); - chip->prox_scheme = val; - mutex_unlock(&chip->lock); - - return count; -} - -static int isl29018_write_raw(struct iio_dev *indio_dev, - struct iio_chan_spec const *chan, - int val, - int val2, - long mask) -{ - struct isl29018_chip *chip = iio_priv(indio_dev); - int ret = -EINVAL; - - mutex_lock(&chip->lock); - switch (mask) { - case IIO_CHAN_INFO_CALIBSCALE: - if (chan->type == IIO_LIGHT) { - chip->calibscale = val; - chip->ucalibscale = val2; - ret = 0; - } - break; - case IIO_CHAN_INFO_INT_TIME: - if (chan->type == IIO_LIGHT) { - if (val) { - mutex_unlock(&chip->lock); - return -EINVAL; - } - ret = isl29018_set_integration_time(chip, val2); - } - break; - case IIO_CHAN_INFO_SCALE: - if (chan->type == IIO_LIGHT) - ret = isl29018_set_scale(chip, val, val2); - break; - default: - break; - } - mutex_unlock(&chip->lock); - - return ret; -} - -static int isl29018_read_raw(struct iio_dev *indio_dev, - struct iio_chan_spec const *chan, - int *val, - int *val2, - long mask) -{ - int ret = -EINVAL; - struct isl29018_chip *chip = iio_priv(indio_dev); - - mutex_lock(&chip->lock); - if (chip->suspended) { - mutex_unlock(&chip->lock); - return -EBUSY; - } - switch (mask) { - case IIO_CHAN_INFO_RAW: - case IIO_CHAN_INFO_PROCESSED: - switch (chan->type) { - case IIO_LIGHT: - ret = isl29018_read_lux(chip, val); - break; - case IIO_INTENSITY: - ret = isl29018_read_ir(chip, val); - break; - case IIO_PROXIMITY: - ret = isl29018_read_proximity_ir(chip, - chip->prox_scheme, - val); - break; - default: - break; - } - if (!ret) - ret = IIO_VAL_INT; - break; - case IIO_CHAN_INFO_INT_TIME: - if (chan->type == IIO_LIGHT) { - *val = 0; - *val2 = isl29018_int_utimes[chip->type][chip->int_time]; - ret = IIO_VAL_INT_PLUS_MICRO; - } - break; - case IIO_CHAN_INFO_SCALE: - if (chan->type == IIO_LIGHT) { - *val = chip->scale.scale; - *val2 = chip->scale.uscale; - ret = IIO_VAL_INT_PLUS_MICRO; - } - break; - case IIO_CHAN_INFO_CALIBSCALE: - if (chan->type == IIO_LIGHT) { - *val = chip->calibscale; - *val2 = chip->ucalibscale; - ret = IIO_VAL_INT_PLUS_MICRO; - } - break; - default: - break; - } - mutex_unlock(&chip->lock); - return ret; -} - -#define ISL29018_LIGHT_CHANNEL { \ - .type = IIO_LIGHT, \ - .indexed = 1, \ - .channel = 0, \ - .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) | \ - BIT(IIO_CHAN_INFO_CALIBSCALE) | \ - BIT(IIO_CHAN_INFO_SCALE) | \ - BIT(IIO_CHAN_INFO_INT_TIME), \ -} - -#define ISL29018_IR_CHANNEL { \ - .type = IIO_INTENSITY, \ - .modified = 1, \ - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ - .channel2 = IIO_MOD_LIGHT_IR, \ -} - -#define ISL29018_PROXIMITY_CHANNEL { \ - .type = IIO_PROXIMITY, \ - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ -} - -static const struct iio_chan_spec isl29018_channels[] = { - ISL29018_LIGHT_CHANNEL, - ISL29018_IR_CHANNEL, - ISL29018_PROXIMITY_CHANNEL, -}; - -static const struct iio_chan_spec isl29023_channels[] = { - ISL29018_LIGHT_CHANNEL, - ISL29018_IR_CHANNEL, -}; - -static IIO_DEVICE_ATTR(in_illuminance_integration_time_available, S_IRUGO, - isl29018_show_int_time_available, NULL, 0); -static IIO_DEVICE_ATTR(in_illuminance_scale_available, S_IRUGO, - isl29018_show_scale_available, NULL, 0); -static IIO_DEVICE_ATTR(proximity_on_chip_ambient_infrared_suppression, - S_IRUGO | S_IWUSR, - isl29018_show_prox_infrared_suppression, - isl29018_store_prox_infrared_suppression, 0); - -#define ISL29018_DEV_ATTR(name) (&iio_dev_attr_##name.dev_attr.attr) - -static struct attribute *isl29018_attributes[] = { - ISL29018_DEV_ATTR(in_illuminance_scale_available), - ISL29018_DEV_ATTR(in_illuminance_integration_time_available), - ISL29018_DEV_ATTR(proximity_on_chip_ambient_infrared_suppression), - NULL -}; - -static struct attribute *isl29023_attributes[] = { - ISL29018_DEV_ATTR(in_illuminance_scale_available), - ISL29018_DEV_ATTR(in_illuminance_integration_time_available), - NULL -}; - -static const struct attribute_group isl29018_group = { - .attrs = isl29018_attributes, -}; - -static const struct attribute_group isl29023_group = { - .attrs = isl29023_attributes, -}; - -static int isl29035_detect(struct isl29018_chip *chip) -{ - int status; - unsigned int id; - struct device *dev = regmap_get_device(chip->regmap); - - status = regmap_read(chip->regmap, ISL29035_REG_DEVICE_ID, &id); - if (status < 0) { - dev_err(dev, - "Error reading ID register with error %d\n", - status); - return status; - } - - id = (id & ISL29035_DEVICE_ID_MASK) >> ISL29035_DEVICE_ID_SHIFT; - - if (id != ISL29035_DEVICE_ID) - return -ENODEV; - - /* Clear brownout bit */ - return regmap_update_bits(chip->regmap, ISL29035_REG_DEVICE_ID, - ISL29035_BOUT_MASK, 0); -} - -enum { - isl29018, - isl29023, - isl29035, -}; - -static int isl29018_chip_init(struct isl29018_chip *chip) -{ - int status; - struct device *dev = regmap_get_device(chip->regmap); - - if (chip->type == isl29035) { - status = isl29035_detect(chip); - if (status < 0) - return status; - } - - /* Code added per Intersil Application Note 1534: - * When VDD sinks to approximately 1.8V or below, some of - * the part's registers may change their state. When VDD - * recovers to 2.25V (or greater), the part may thus be in an - * unknown mode of operation. The user can return the part to - * a known mode of operation either by (a) setting VDD = 0V for - * 1 second or more and then powering back up with a slew rate - * of 0.5V/ms or greater, or (b) via I2C disable all ALS/PROX - * conversions, clear the test registers, and then rewrite all - * registers to the desired values. - * ... - * For ISL29011, ISL29018, ISL29021, ISL29023 - * 1. Write 0x00 to register 0x08 (TEST) - * 2. Write 0x00 to register 0x00 (CMD1) - * 3. Rewrite all registers to the desired values - * - * ISL29018 Data Sheet (FN6619.1, Feb 11, 2010) essentially says - * the same thing EXCEPT the data sheet asks for a 1ms delay after - * writing the CMD1 register. - */ - status = regmap_write(chip->regmap, ISL29018_REG_TEST, 0x0); - if (status < 0) { - dev_err(dev, "Failed to clear isl29018 TEST reg.(%d)\n", - status); - return status; - } - - /* See Intersil AN1534 comments above. - * "Operating Mode" (COMMAND1) register is reprogrammed when - * data is read from the device. - */ - status = regmap_write(chip->regmap, ISL29018_REG_ADD_COMMAND1, 0); - if (status < 0) { - dev_err(dev, "Failed to clear isl29018 CMD1 reg.(%d)\n", - status); - return status; - } - - usleep_range(1000, 2000); /* per data sheet, page 10 */ - - /* Set defaults */ - status = isl29018_set_scale(chip, chip->scale.scale, - chip->scale.uscale); - if (status < 0) { - dev_err(dev, "Init of isl29018 fails\n"); - return status; - } - - status = isl29018_set_integration_time(chip, - isl29018_int_utimes[chip->type][chip->int_time]); - if (status < 0) { - dev_err(dev, "Init of isl29018 fails\n"); - return status; - } - - return 0; -} - -static const struct iio_info isl29018_info = { - .attrs = &isl29018_group, - .driver_module = THIS_MODULE, - .read_raw = isl29018_read_raw, - .write_raw = isl29018_write_raw, -}; - -static const struct iio_info isl29023_info = { - .attrs = &isl29023_group, - .driver_module = THIS_MODULE, - .read_raw = isl29018_read_raw, - .write_raw = isl29018_write_raw, -}; - -static bool isl29018_is_volatile_reg(struct device *dev, unsigned int reg) -{ - switch (reg) { - case ISL29018_REG_ADD_DATA_LSB: - case ISL29018_REG_ADD_DATA_MSB: - case ISL29018_REG_ADD_COMMAND1: - case ISL29018_REG_TEST: - case ISL29035_REG_DEVICE_ID: - return true; - default: - return false; - } -} - -static const struct regmap_config isl29018_regmap_config = { - .reg_bits = 8, - .val_bits = 8, - .volatile_reg = isl29018_is_volatile_reg, - .max_register = ISL29018_REG_TEST, - .num_reg_defaults_raw = ISL29018_REG_TEST + 1, - .cache_type = REGCACHE_RBTREE, -}; - -static const struct regmap_config isl29035_regmap_config = { - .reg_bits = 8, - .val_bits = 8, - .volatile_reg = isl29018_is_volatile_reg, - .max_register = ISL29035_REG_DEVICE_ID, - .num_reg_defaults_raw = ISL29035_REG_DEVICE_ID + 1, - .cache_type = REGCACHE_RBTREE, -}; - -struct isl29018_chip_info { - const struct iio_chan_spec *channels; - int num_channels; - const struct iio_info *indio_info; - const struct regmap_config *regmap_cfg; -}; - -static const struct isl29018_chip_info isl29018_chip_info_tbl[] = { - [isl29018] = { - .channels = isl29018_channels, - .num_channels = ARRAY_SIZE(isl29018_channels), - .indio_info = &isl29018_info, - .regmap_cfg = &isl29018_regmap_config, - }, - [isl29023] = { - .channels = isl29023_channels, - .num_channels = ARRAY_SIZE(isl29023_channels), - .indio_info = &isl29023_info, - .regmap_cfg = &isl29018_regmap_config, - }, - [isl29035] = { - .channels = isl29023_channels, - .num_channels = ARRAY_SIZE(isl29023_channels), - .indio_info = &isl29023_info, - .regmap_cfg = &isl29035_regmap_config, - }, -}; - -static const char *isl29018_match_acpi_device(struct device *dev, int *data) -{ - const struct acpi_device_id *id; - - id = acpi_match_device(dev->driver->acpi_match_table, dev); - - if (!id) - return NULL; - - *data = (int)id->driver_data; - - return dev_name(dev); -} - -static int isl29018_probe(struct i2c_client *client, - const struct i2c_device_id *id) -{ - struct isl29018_chip *chip; - struct iio_dev *indio_dev; - int err; - const char *name = NULL; - int dev_id = 0; - - indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*chip)); - if (!indio_dev) - return -ENOMEM; - chip = iio_priv(indio_dev); - - i2c_set_clientdata(client, indio_dev); - - if (id) { - name = id->name; - dev_id = id->driver_data; - } - - if (ACPI_HANDLE(&client->dev)) - name = isl29018_match_acpi_device(&client->dev, &dev_id); - - mutex_init(&chip->lock); - - chip->type = dev_id; - chip->calibscale = 1; - chip->ucalibscale = 0; - chip->int_time = ISL29018_INT_TIME_16; - chip->scale = isl29018_scales[chip->int_time][0]; - chip->suspended = false; - - chip->regmap = devm_regmap_init_i2c(client, - isl29018_chip_info_tbl[dev_id].regmap_cfg); - if (IS_ERR(chip->regmap)) { - err = PTR_ERR(chip->regmap); - dev_err(&client->dev, "regmap initialization fails: %d\n", err); - return err; - } - - err = isl29018_chip_init(chip); - if (err) - return err; - - indio_dev->info = isl29018_chip_info_tbl[dev_id].indio_info; - indio_dev->channels = isl29018_chip_info_tbl[dev_id].channels; - indio_dev->num_channels = isl29018_chip_info_tbl[dev_id].num_channels; - indio_dev->name = name; - indio_dev->dev.parent = &client->dev; - indio_dev->modes = INDIO_DIRECT_MODE; - return devm_iio_device_register(&client->dev, indio_dev); -} - -#ifdef CONFIG_PM_SLEEP -static int isl29018_suspend(struct device *dev) -{ - struct isl29018_chip *chip = iio_priv(dev_get_drvdata(dev)); - - mutex_lock(&chip->lock); - - /* Since this driver uses only polling commands, we are by default in - * auto shutdown (ie, power-down) mode. - * So we do not have much to do here. - */ - chip->suspended = true; - - mutex_unlock(&chip->lock); - return 0; -} - -static int isl29018_resume(struct device *dev) -{ - struct isl29018_chip *chip = iio_priv(dev_get_drvdata(dev)); - int err; - - mutex_lock(&chip->lock); - - err = isl29018_chip_init(chip); - if (!err) - chip->suspended = false; - - mutex_unlock(&chip->lock); - return err; -} - -static SIMPLE_DEV_PM_OPS(isl29018_pm_ops, isl29018_suspend, isl29018_resume); -#define ISL29018_PM_OPS (&isl29018_pm_ops) -#else -#define ISL29018_PM_OPS NULL -#endif - -static const struct acpi_device_id isl29018_acpi_match[] = { - {"ISL29018", isl29018}, - {"ISL29023", isl29023}, - {"ISL29035", isl29035}, - {}, -}; -MODULE_DEVICE_TABLE(acpi, isl29018_acpi_match); - -static const struct i2c_device_id isl29018_id[] = { - {"isl29018", isl29018}, - {"isl29023", isl29023}, - {"isl29035", isl29035}, - {} -}; - -MODULE_DEVICE_TABLE(i2c, isl29018_id); - -static const struct of_device_id isl29018_of_match[] = { - { .compatible = "isil,isl29018", }, - { .compatible = "isil,isl29023", }, - { .compatible = "isil,isl29035", }, - { }, -}; -MODULE_DEVICE_TABLE(of, isl29018_of_match); - -static struct i2c_driver isl29018_driver = { - .driver = { - .name = "isl29018", - .acpi_match_table = ACPI_PTR(isl29018_acpi_match), - .pm = ISL29018_PM_OPS, - .of_match_table = isl29018_of_match, - }, - .probe = isl29018_probe, - .id_table = isl29018_id, -}; -module_i2c_driver(isl29018_driver); - -MODULE_DESCRIPTION("ISL29018 Ambient Light Sensor driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/staging/iio/light/tsl2583.c b/drivers/staging/iio/light/tsl2583.c deleted file mode 100644 index 08f1583ee34e..000000000000 --- a/drivers/staging/iio/light/tsl2583.c +++ /dev/null @@ -1,963 +0,0 @@ -/* - * Device driver for monitoring ambient light intensity (lux) - * within the TAOS tsl258x family of devices (tsl2580, tsl2581). - * - * Copyright (c) 2011, TAOS Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. - */ - -#include <linux/kernel.h> -#include <linux/i2c.h> -#include <linux/errno.h> -#include <linux/delay.h> -#include <linux/string.h> -#include <linux/mutex.h> -#include <linux/unistd.h> -#include <linux/slab.h> -#include <linux/module.h> -#include <linux/iio/iio.h> - -#define TSL258X_MAX_DEVICE_REGS 32 - -/* Triton register offsets */ -#define TSL258X_REG_MAX 8 - -/* Device Registers and Masks */ -#define TSL258X_CNTRL 0x00 -#define TSL258X_ALS_TIME 0X01 -#define TSL258X_INTERRUPT 0x02 -#define TSL258X_GAIN 0x07 -#define TSL258X_REVID 0x11 -#define TSL258X_CHIPID 0x12 -#define TSL258X_ALS_CHAN0LO 0x14 -#define TSL258X_ALS_CHAN0HI 0x15 -#define TSL258X_ALS_CHAN1LO 0x16 -#define TSL258X_ALS_CHAN1HI 0x17 -#define TSL258X_TMR_LO 0x18 -#define TSL258X_TMR_HI 0x19 - -/* tsl2583 cmd reg masks */ -#define TSL258X_CMD_REG 0x80 -#define TSL258X_CMD_SPL_FN 0x60 -#define TSL258X_CMD_ALS_INT_CLR 0X01 - -/* tsl2583 cntrl reg masks */ -#define TSL258X_CNTL_ADC_ENBL 0x02 -#define TSL258X_CNTL_PWR_ON 0x01 - -/* tsl2583 status reg masks */ -#define TSL258X_STA_ADC_VALID 0x01 -#define TSL258X_STA_ADC_INTR 0x10 - -/* Lux calculation constants */ -#define TSL258X_LUX_CALC_OVER_FLOW 65535 - -enum { - TSL258X_CHIP_UNKNOWN = 0, - TSL258X_CHIP_WORKING = 1, - TSL258X_CHIP_SUSPENDED = 2 -}; - -/* Per-device data */ -struct taos_als_info { - u16 als_ch0; - u16 als_ch1; - u16 lux; -}; - -struct taos_settings { - int als_time; - int als_gain; - int als_gain_trim; - int als_cal_target; -}; - -struct tsl2583_chip { - struct mutex als_mutex; - struct i2c_client *client; - struct taos_als_info als_cur_info; - struct taos_settings taos_settings; - int als_time_scale; - int als_saturation; - int taos_chip_status; - u8 taos_config[8]; -}; - -/* - * Initial values for device - this values can/will be changed by driver. - * and applications as needed. - * These values are dynamic. - */ -static const u8 taos_config[8] = { - 0x00, 0xee, 0x00, 0x03, 0x00, 0xFF, 0xFF, 0x00 -}; /* cntrl atime intC Athl0 Athl1 Athh0 Athh1 gain */ - -struct taos_lux { - unsigned int ratio; - unsigned int ch0; - unsigned int ch1; -}; - -/* This structure is intentionally large to accommodate updates via sysfs. */ -/* Sized to 11 = max 10 segments + 1 termination segment */ -/* Assumption is one and only one type of glass used */ -static struct taos_lux taos_device_lux[11] = { - { 9830, 8520, 15729 }, - { 12452, 10807, 23344 }, - { 14746, 6383, 11705 }, - { 17695, 4063, 6554 }, -}; - -struct gainadj { - s16 ch0; - s16 ch1; -}; - -/* Index = (0 - 3) Used to validate the gain selection index */ -static const struct gainadj gainadj[] = { - { 1, 1 }, - { 8, 8 }, - { 16, 16 }, - { 107, 115 } -}; - -/* - * Provides initial operational parameter defaults. - * These defaults may be changed through the device's sysfs files. - */ -static void taos_defaults(struct tsl2583_chip *chip) -{ - /* Operational parameters */ - chip->taos_settings.als_time = 100; - /* must be a multiple of 50mS */ - chip->taos_settings.als_gain = 0; - /* this is actually an index into the gain table */ - /* assume clear glass as default */ - chip->taos_settings.als_gain_trim = 1000; - /* default gain trim to account for aperture effects */ - chip->taos_settings.als_cal_target = 130; - /* Known external ALS reading used for calibration */ -} - -/* - * Read a number of bytes starting at register (reg) location. - * Return 0, or i2c_smbus_write_byte ERROR code. - */ -static int -taos_i2c_read(struct i2c_client *client, u8 reg, u8 *val, unsigned int len) -{ - int i, ret; - - for (i = 0; i < len; i++) { - /* select register to write */ - ret = i2c_smbus_write_byte(client, (TSL258X_CMD_REG | reg)); - if (ret < 0) { - dev_err(&client->dev, - "taos_i2c_read failed to write register %x\n", - reg); - return ret; - } - /* read the data */ - *val = i2c_smbus_read_byte(client); - val++; - reg++; - } - return 0; -} - -/* - * Reads and calculates current lux value. - * The raw ch0 and ch1 values of the ambient light sensed in the last - * integration cycle are read from the device. - * Time scale factor array values are adjusted based on the integration time. - * The raw values are multiplied by a scale factor, and device gain is obtained - * using gain index. Limit checks are done next, then the ratio of a multiple - * of ch1 value, to the ch0 value, is calculated. The array taos_device_lux[] - * declared above is then scanned to find the first ratio value that is just - * above the ratio we just calculated. The ch0 and ch1 multiplier constants in - * the array are then used along with the time scale factor array values, to - * calculate the lux. - */ -static int taos_get_lux(struct iio_dev *indio_dev) -{ - u16 ch0, ch1; /* separated ch0/ch1 data from device */ - u32 lux; /* raw lux calculated from device data */ - u64 lux64; - u32 ratio; - u8 buf[5]; - struct taos_lux *p; - struct tsl2583_chip *chip = iio_priv(indio_dev); - int i, ret; - u32 ch0lux = 0; - u32 ch1lux = 0; - - if (mutex_trylock(&chip->als_mutex) == 0) { - dev_info(&chip->client->dev, "taos_get_lux device is busy\n"); - return chip->als_cur_info.lux; /* busy, so return LAST VALUE */ - } - - if (chip->taos_chip_status != TSL258X_CHIP_WORKING) { - /* device is not enabled */ - dev_err(&chip->client->dev, "taos_get_lux device is not enabled\n"); - ret = -EBUSY; - goto out_unlock; - } - - ret = taos_i2c_read(chip->client, (TSL258X_CMD_REG), &buf[0], 1); - if (ret < 0) { - dev_err(&chip->client->dev, "taos_get_lux failed to read CMD_REG\n"); - goto out_unlock; - } - /* is data new & valid */ - if (!(buf[0] & TSL258X_STA_ADC_INTR)) { - dev_err(&chip->client->dev, "taos_get_lux data not valid\n"); - ret = chip->als_cur_info.lux; /* return LAST VALUE */ - goto out_unlock; - } - - for (i = 0; i < 4; i++) { - int reg = TSL258X_CMD_REG | (TSL258X_ALS_CHAN0LO + i); - - ret = taos_i2c_read(chip->client, reg, &buf[i], 1); - if (ret < 0) { - dev_err(&chip->client->dev, - "taos_get_lux failed to read register %x\n", - reg); - goto out_unlock; - } - } - - /* - * clear status, really interrupt status (interrupts are off), but - * we use the bit anyway - don't forget 0x80 - this is a command - */ - ret = i2c_smbus_write_byte(chip->client, - (TSL258X_CMD_REG | TSL258X_CMD_SPL_FN | - TSL258X_CMD_ALS_INT_CLR)); - - if (ret < 0) { - dev_err(&chip->client->dev, - "taos_i2c_write_command failed in taos_get_lux, err = %d\n", - ret); - goto out_unlock; /* have no data, so return failure */ - } - - /* extract ALS/lux data */ - ch0 = le16_to_cpup((const __le16 *)&buf[0]); - ch1 = le16_to_cpup((const __le16 *)&buf[2]); - - chip->als_cur_info.als_ch0 = ch0; - chip->als_cur_info.als_ch1 = ch1; - - if ((ch0 >= chip->als_saturation) || (ch1 >= chip->als_saturation)) - goto return_max; - - if (!ch0) { - /* have no data, so return LAST VALUE */ - ret = 0; - chip->als_cur_info.lux = 0; - goto out_unlock; - } - /* calculate ratio */ - ratio = (ch1 << 15) / ch0; - /* convert to unscaled lux using the pointer to the table */ - for (p = (struct taos_lux *)taos_device_lux; - p->ratio != 0 && p->ratio < ratio; p++) - ; - - if (p->ratio == 0) { - lux = 0; - } else { - ch0lux = ((ch0 * p->ch0) + - (gainadj[chip->taos_settings.als_gain].ch0 >> 1)) - / gainadj[chip->taos_settings.als_gain].ch0; - ch1lux = ((ch1 * p->ch1) + - (gainadj[chip->taos_settings.als_gain].ch1 >> 1)) - / gainadj[chip->taos_settings.als_gain].ch1; - lux = ch0lux - ch1lux; - } - - /* note: lux is 31 bit max at this point */ - if (ch1lux > ch0lux) { - dev_dbg(&chip->client->dev, "No Data - Return last value\n"); - ret = 0; - chip->als_cur_info.lux = 0; - goto out_unlock; - } - - /* adjust for active time scale */ - if (chip->als_time_scale == 0) - lux = 0; - else - lux = (lux + (chip->als_time_scale >> 1)) / - chip->als_time_scale; - - /* Adjust for active gain scale. - * The taos_device_lux tables above have a factor of 8192 built in, - * so we need to shift right. - * User-specified gain provides a multiplier. - * Apply user-specified gain before shifting right to retain precision. - * Use 64 bits to avoid overflow on multiplication. - * Then go back to 32 bits before division to avoid using div_u64(). - */ - lux64 = lux; - lux64 = lux64 * chip->taos_settings.als_gain_trim; - lux64 >>= 13; - lux = lux64; - lux = (lux + 500) / 1000; - if (lux > TSL258X_LUX_CALC_OVER_FLOW) { /* check for overflow */ -return_max: - lux = TSL258X_LUX_CALC_OVER_FLOW; - } - - /* Update the structure with the latest VALID lux. */ - chip->als_cur_info.lux = lux; - ret = lux; - -out_unlock: - mutex_unlock(&chip->als_mutex); - return ret; -} - -/* - * Obtain single reading and calculate the als_gain_trim (later used - * to derive actual lux). - * Return updated gain_trim value. - */ -static int taos_als_calibrate(struct iio_dev *indio_dev) -{ - struct tsl2583_chip *chip = iio_priv(indio_dev); - u8 reg_val; - unsigned int gain_trim_val; - int ret; - int lux_val; - - ret = i2c_smbus_write_byte(chip->client, - (TSL258X_CMD_REG | TSL258X_CNTRL)); - if (ret < 0) { - dev_err(&chip->client->dev, - "taos_als_calibrate failed to reach the CNTRL register, ret=%d\n", - ret); - return ret; - } - - reg_val = i2c_smbus_read_byte(chip->client); - if ((reg_val & (TSL258X_CNTL_ADC_ENBL | TSL258X_CNTL_PWR_ON)) - != (TSL258X_CNTL_ADC_ENBL | TSL258X_CNTL_PWR_ON)) { - dev_err(&chip->client->dev, - "taos_als_calibrate failed: device not powered on with ADC enabled\n"); - return -1; - } - - ret = i2c_smbus_write_byte(chip->client, - (TSL258X_CMD_REG | TSL258X_CNTRL)); - if (ret < 0) { - dev_err(&chip->client->dev, - "taos_als_calibrate failed to reach the STATUS register, ret=%d\n", - ret); - return ret; - } - reg_val = i2c_smbus_read_byte(chip->client); - - if ((reg_val & TSL258X_STA_ADC_VALID) != TSL258X_STA_ADC_VALID) { - dev_err(&chip->client->dev, - "taos_als_calibrate failed: STATUS - ADC not valid.\n"); - return -ENODATA; - } - lux_val = taos_get_lux(indio_dev); - if (lux_val < 0) { - dev_err(&chip->client->dev, "taos_als_calibrate failed to get lux\n"); - return lux_val; - } - gain_trim_val = (unsigned int)(((chip->taos_settings.als_cal_target) - * chip->taos_settings.als_gain_trim) / lux_val); - - if ((gain_trim_val < 250) || (gain_trim_val > 4000)) { - dev_err(&chip->client->dev, - "taos_als_calibrate failed: trim_val of %d is out of range\n", - gain_trim_val); - return -ENODATA; - } - chip->taos_settings.als_gain_trim = (int)gain_trim_val; - - return (int)gain_trim_val; -} - -/* - * Turn the device on. - * Configuration must be set before calling this function. - */ -static int taos_chip_on(struct iio_dev *indio_dev) -{ - int i; - int ret; - u8 *uP; - u8 utmp; - int als_count; - int als_time; - struct tsl2583_chip *chip = iio_priv(indio_dev); - - /* and make sure we're not already on */ - if (chip->taos_chip_status == TSL258X_CHIP_WORKING) { - /* if forcing a register update - turn off, then on */ - dev_info(&chip->client->dev, "device is already enabled\n"); - return -EINVAL; - } - - /* determine als integration register */ - als_count = (chip->taos_settings.als_time * 100 + 135) / 270; - if (!als_count) - als_count = 1; /* ensure at least one cycle */ - - /* convert back to time (encompasses overrides) */ - als_time = (als_count * 27 + 5) / 10; - chip->taos_config[TSL258X_ALS_TIME] = 256 - als_count; - - /* Set the gain based on taos_settings struct */ - chip->taos_config[TSL258X_GAIN] = chip->taos_settings.als_gain; - - /* set chip struct re scaling and saturation */ - chip->als_saturation = als_count * 922; /* 90% of full scale */ - chip->als_time_scale = (als_time + 25) / 50; - - /* - * TSL258x Specific power-on / adc enable sequence - * Power on the device 1st. - */ - utmp = TSL258X_CNTL_PWR_ON; - ret = i2c_smbus_write_byte_data(chip->client, - TSL258X_CMD_REG | TSL258X_CNTRL, utmp); - if (ret < 0) { - dev_err(&chip->client->dev, "taos_chip_on failed on CNTRL reg.\n"); - return ret; - } - - /* - * Use the following shadow copy for our delay before enabling ADC. - * Write all the registers. - */ - for (i = 0, uP = chip->taos_config; i < TSL258X_REG_MAX; i++) { - ret = i2c_smbus_write_byte_data(chip->client, - TSL258X_CMD_REG + i, - *uP++); - if (ret < 0) { - dev_err(&chip->client->dev, - "taos_chip_on failed on reg %d.\n", i); - return ret; - } - } - - usleep_range(3000, 3500); - /* - * NOW enable the ADC - * initialize the desired mode of operation - */ - utmp = TSL258X_CNTL_PWR_ON | TSL258X_CNTL_ADC_ENBL; - ret = i2c_smbus_write_byte_data(chip->client, - TSL258X_CMD_REG | TSL258X_CNTRL, - utmp); - if (ret < 0) { - dev_err(&chip->client->dev, "taos_chip_on failed on 2nd CTRL reg.\n"); - return ret; - } - chip->taos_chip_status = TSL258X_CHIP_WORKING; - - return ret; -} - -static int taos_chip_off(struct iio_dev *indio_dev) -{ - struct tsl2583_chip *chip = iio_priv(indio_dev); - - /* turn device off */ - chip->taos_chip_status = TSL258X_CHIP_SUSPENDED; - return i2c_smbus_write_byte_data(chip->client, - TSL258X_CMD_REG | TSL258X_CNTRL, - 0x00); -} - -/* Sysfs Interface Functions */ - -static ssize_t taos_power_state_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct tsl2583_chip *chip = iio_priv(indio_dev); - - return sprintf(buf, "%d\n", chip->taos_chip_status); -} - -static ssize_t taos_power_state_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t len) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - int value; - - if (kstrtoint(buf, 0, &value)) - return -EINVAL; - - if (!value) - taos_chip_off(indio_dev); - else - taos_chip_on(indio_dev); - - return len; -} - -static ssize_t taos_gain_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct tsl2583_chip *chip = iio_priv(indio_dev); - char gain[4] = {0}; - - switch (chip->taos_settings.als_gain) { - case 0: - strcpy(gain, "001"); - break; - case 1: - strcpy(gain, "008"); - break; - case 2: - strcpy(gain, "016"); - break; - case 3: - strcpy(gain, "111"); - break; - } - - return sprintf(buf, "%s\n", gain); -} - -static ssize_t taos_gain_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t len) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct tsl2583_chip *chip = iio_priv(indio_dev); - int value; - - if (kstrtoint(buf, 0, &value)) - return -EINVAL; - - switch (value) { - case 1: - chip->taos_settings.als_gain = 0; - break; - case 8: - chip->taos_settings.als_gain = 1; - break; - case 16: - chip->taos_settings.als_gain = 2; - break; - case 111: - chip->taos_settings.als_gain = 3; - break; - default: - dev_err(dev, "Invalid Gain Index (must be 1,8,16,111)\n"); - return -1; - } - - return len; -} - -static ssize_t taos_gain_available_show(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - return sprintf(buf, "%s\n", "1 8 16 111"); -} - -static ssize_t taos_als_time_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct tsl2583_chip *chip = iio_priv(indio_dev); - - return sprintf(buf, "%d\n", chip->taos_settings.als_time); -} - -static ssize_t taos_als_time_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t len) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct tsl2583_chip *chip = iio_priv(indio_dev); - int value; - - if (kstrtoint(buf, 0, &value)) - return -EINVAL; - - if ((value < 50) || (value > 650)) - return -EINVAL; - - if (value % 50) - return -EINVAL; - - chip->taos_settings.als_time = value; - - return len; -} - -static ssize_t taos_als_time_available_show(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - return sprintf(buf, "%s\n", - "50 100 150 200 250 300 350 400 450 500 550 600 650"); -} - -static ssize_t taos_als_trim_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct tsl2583_chip *chip = iio_priv(indio_dev); - - return sprintf(buf, "%d\n", chip->taos_settings.als_gain_trim); -} - -static ssize_t taos_als_trim_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t len) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct tsl2583_chip *chip = iio_priv(indio_dev); - int value; - - if (kstrtoint(buf, 0, &value)) - return -EINVAL; - - if (value) - chip->taos_settings.als_gain_trim = value; - - return len; -} - -static ssize_t taos_als_cal_target_show(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct tsl2583_chip *chip = iio_priv(indio_dev); - - return sprintf(buf, "%d\n", chip->taos_settings.als_cal_target); -} - -static ssize_t taos_als_cal_target_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t len) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct tsl2583_chip *chip = iio_priv(indio_dev); - int value; - - if (kstrtoint(buf, 0, &value)) - return -EINVAL; - - if (value) - chip->taos_settings.als_cal_target = value; - - return len; -} - -static ssize_t taos_lux_show(struct device *dev, struct device_attribute *attr, - char *buf) -{ - int ret; - - ret = taos_get_lux(dev_to_iio_dev(dev)); - if (ret < 0) - return ret; - - return sprintf(buf, "%d\n", ret); -} - -static ssize_t taos_do_calibrate(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t len) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - int value; - - if (kstrtoint(buf, 0, &value)) - return -EINVAL; - - if (value == 1) - taos_als_calibrate(indio_dev); - - return len; -} - -static ssize_t taos_luxtable_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - int i; - int offset = 0; - - for (i = 0; i < ARRAY_SIZE(taos_device_lux); i++) { - offset += sprintf(buf + offset, "%u,%u,%u,", - taos_device_lux[i].ratio, - taos_device_lux[i].ch0, - taos_device_lux[i].ch1); - if (taos_device_lux[i].ratio == 0) { - /* - * We just printed the first "0" entry. - * Now get rid of the extra "," and break. - */ - offset--; - break; - } - } - - offset += sprintf(buf + offset, "\n"); - return offset; -} - -static ssize_t taos_luxtable_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t len) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct tsl2583_chip *chip = iio_priv(indio_dev); - int value[ARRAY_SIZE(taos_device_lux) * 3 + 1]; - int n; - - get_options(buf, ARRAY_SIZE(value), value); - - /* We now have an array of ints starting at value[1], and - * enumerated by value[0]. - * We expect each group of three ints is one table entry, - * and the last table entry is all 0. - */ - n = value[0]; - if ((n % 3) || n < 6 || n > ((ARRAY_SIZE(taos_device_lux) - 1) * 3)) { - dev_info(dev, "LUX TABLE INPUT ERROR 1 Value[0]=%d\n", n); - return -EINVAL; - } - if ((value[(n - 2)] | value[(n - 1)] | value[n]) != 0) { - dev_info(dev, "LUX TABLE INPUT ERROR 2 Value[0]=%d\n", n); - return -EINVAL; - } - - if (chip->taos_chip_status == TSL258X_CHIP_WORKING) - taos_chip_off(indio_dev); - - /* Zero out the table */ - memset(taos_device_lux, 0, sizeof(taos_device_lux)); - memcpy(taos_device_lux, &value[1], (value[0] * 4)); - - taos_chip_on(indio_dev); - - return len; -} - -static DEVICE_ATTR(power_state, S_IRUGO | S_IWUSR, - taos_power_state_show, taos_power_state_store); - -static DEVICE_ATTR(illuminance0_calibscale, S_IRUGO | S_IWUSR, - taos_gain_show, taos_gain_store); -static DEVICE_ATTR(illuminance0_calibscale_available, S_IRUGO, - taos_gain_available_show, NULL); - -static DEVICE_ATTR(illuminance0_integration_time, S_IRUGO | S_IWUSR, - taos_als_time_show, taos_als_time_store); -static DEVICE_ATTR(illuminance0_integration_time_available, S_IRUGO, - taos_als_time_available_show, NULL); - -static DEVICE_ATTR(illuminance0_calibbias, S_IRUGO | S_IWUSR, - taos_als_trim_show, taos_als_trim_store); - -static DEVICE_ATTR(illuminance0_input_target, S_IRUGO | S_IWUSR, - taos_als_cal_target_show, taos_als_cal_target_store); - -static DEVICE_ATTR(illuminance0_input, S_IRUGO, taos_lux_show, NULL); -static DEVICE_ATTR(illuminance0_calibrate, S_IWUSR, NULL, taos_do_calibrate); -static DEVICE_ATTR(illuminance0_lux_table, S_IRUGO | S_IWUSR, - taos_luxtable_show, taos_luxtable_store); - -static struct attribute *sysfs_attrs_ctrl[] = { - &dev_attr_power_state.attr, - &dev_attr_illuminance0_calibscale.attr, /* Gain */ - &dev_attr_illuminance0_calibscale_available.attr, - &dev_attr_illuminance0_integration_time.attr, /* I time*/ - &dev_attr_illuminance0_integration_time_available.attr, - &dev_attr_illuminance0_calibbias.attr, /* trim */ - &dev_attr_illuminance0_input_target.attr, - &dev_attr_illuminance0_input.attr, - &dev_attr_illuminance0_calibrate.attr, - &dev_attr_illuminance0_lux_table.attr, - NULL -}; - -static const struct attribute_group tsl2583_attribute_group = { - .attrs = sysfs_attrs_ctrl, -}; - -/* Use the default register values to identify the Taos device */ -static int taos_tsl258x_device(unsigned char *bufp) -{ - return ((bufp[TSL258X_CHIPID] & 0xf0) == 0x90); -} - -static const struct iio_info tsl2583_info = { - .attrs = &tsl2583_attribute_group, - .driver_module = THIS_MODULE, -}; - -/* - * Client probe function - When a valid device is found, the driver's device - * data structure is updated, and initialization completes successfully. - */ -static int taos_probe(struct i2c_client *clientp, - const struct i2c_device_id *idp) -{ - int i, ret; - unsigned char buf[TSL258X_MAX_DEVICE_REGS]; - struct tsl2583_chip *chip; - struct iio_dev *indio_dev; - - if (!i2c_check_functionality(clientp->adapter, - I2C_FUNC_SMBUS_BYTE_DATA)) { - dev_err(&clientp->dev, "taos_probe() - i2c smbus byte data func unsupported\n"); - return -EOPNOTSUPP; - } - - indio_dev = devm_iio_device_alloc(&clientp->dev, sizeof(*chip)); - if (!indio_dev) - return -ENOMEM; - chip = iio_priv(indio_dev); - chip->client = clientp; - i2c_set_clientdata(clientp, indio_dev); - - mutex_init(&chip->als_mutex); - chip->taos_chip_status = TSL258X_CHIP_UNKNOWN; - memcpy(chip->taos_config, taos_config, sizeof(chip->taos_config)); - - for (i = 0; i < TSL258X_MAX_DEVICE_REGS; i++) { - ret = i2c_smbus_write_byte(clientp, - (TSL258X_CMD_REG | (TSL258X_CNTRL + i))); - if (ret < 0) { - dev_err(&clientp->dev, - "i2c_smbus_write_byte to cmd reg failed in taos_probe(), err = %d\n", - ret); - return ret; - } - ret = i2c_smbus_read_byte(clientp); - if (ret < 0) { - dev_err(&clientp->dev, - "i2c_smbus_read_byte from reg failed in taos_probe(), err = %d\n", - ret); - return ret; - } - buf[i] = ret; - } - - if (!taos_tsl258x_device(buf)) { - dev_info(&clientp->dev, - "i2c device found but does not match expected id in taos_probe()\n"); - return -EINVAL; - } - - ret = i2c_smbus_write_byte(clientp, (TSL258X_CMD_REG | TSL258X_CNTRL)); - if (ret < 0) { - dev_err(&clientp->dev, - "i2c_smbus_write_byte() to cmd reg failed in taos_probe(), err = %d\n", - ret); - return ret; - } - - indio_dev->info = &tsl2583_info; - indio_dev->dev.parent = &clientp->dev; - indio_dev->modes = INDIO_DIRECT_MODE; - indio_dev->name = chip->client->name; - ret = devm_iio_device_register(indio_dev->dev.parent, indio_dev); - if (ret) { - dev_err(&clientp->dev, "iio registration failed\n"); - return ret; - } - - /* Load up the V2 defaults (these are hard coded defaults for now) */ - taos_defaults(chip); - - /* Make sure the chip is on */ - taos_chip_on(indio_dev); - - dev_info(&clientp->dev, "Light sensor found.\n"); - return 0; -} - -#ifdef CONFIG_PM_SLEEP -static int taos_suspend(struct device *dev) -{ - struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); - struct tsl2583_chip *chip = iio_priv(indio_dev); - int ret = 0; - - mutex_lock(&chip->als_mutex); - - if (chip->taos_chip_status == TSL258X_CHIP_WORKING) { - ret = taos_chip_off(indio_dev); - chip->taos_chip_status = TSL258X_CHIP_SUSPENDED; - } - - mutex_unlock(&chip->als_mutex); - return ret; -} - -static int taos_resume(struct device *dev) -{ - struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); - struct tsl2583_chip *chip = iio_priv(indio_dev); - int ret = 0; - - mutex_lock(&chip->als_mutex); - - if (chip->taos_chip_status == TSL258X_CHIP_SUSPENDED) - ret = taos_chip_on(indio_dev); - - mutex_unlock(&chip->als_mutex); - return ret; -} - -static SIMPLE_DEV_PM_OPS(taos_pm_ops, taos_suspend, taos_resume); -#define TAOS_PM_OPS (&taos_pm_ops) -#else -#define TAOS_PM_OPS NULL -#endif - -static struct i2c_device_id taos_idtable[] = { - { "tsl2580", 0 }, - { "tsl2581", 1 }, - { "tsl2583", 2 }, - {} -}; -MODULE_DEVICE_TABLE(i2c, taos_idtable); - -/* Driver definition */ -static struct i2c_driver taos_driver = { - .driver = { - .name = "tsl2583", - .pm = TAOS_PM_OPS, - }, - .id_table = taos_idtable, - .probe = taos_probe, -}; -module_i2c_driver(taos_driver); - -MODULE_AUTHOR("J. August Brenner<jbrenner@taosinc.com>"); -MODULE_DESCRIPTION("TAOS tsl2583 ambient light sensor driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/staging/iio/meter/ade7758_core.c b/drivers/staging/iio/meter/ade7758_core.c index ebb8a1993303..3af8f77b8e41 100644 --- a/drivers/staging/iio/meter/ade7758_core.c +++ b/drivers/staging/iio/meter/ade7758_core.c @@ -465,38 +465,26 @@ err_ret: return ret; } -static ssize_t ade7758_read_frequency(struct device *dev, - struct device_attribute *attr, char *buf) +static int ade7758_read_samp_freq(struct device *dev, int *val) { int ret; u8 t; - int sps; ret = ade7758_spi_read_reg_8(dev, ADE7758_WAVMODE, &t); if (ret) return ret; t = (t >> 5) & 0x3; - sps = 26040 / (1 << t); + *val = 26040 / (1 << t); - return sprintf(buf, "%d SPS\n", sps); + return 0; } -static ssize_t ade7758_write_frequency(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t len) +static int ade7758_write_samp_freq(struct device *dev, int val) { - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - u16 val; int ret; u8 reg, t; - ret = kstrtou16(buf, 10, &val); - if (ret) - return ret; - - mutex_lock(&indio_dev->mlock); - switch (val) { case 26040: t = 0; @@ -525,9 +513,49 @@ static ssize_t ade7758_write_frequency(struct device *dev, ret = ade7758_spi_write_reg_8(dev, ADE7758_WAVMODE, reg); out: - mutex_unlock(&indio_dev->mlock); + return ret; +} - return ret ? ret : len; +static int ade7758_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, + int *val2, + long mask) +{ + int ret; + + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: + mutex_lock(&indio_dev->mlock); + ret = ade7758_read_samp_freq(&indio_dev->dev, val); + mutex_unlock(&indio_dev->mlock); + return ret; + default: + return -EINVAL; + } + + return ret; +} + +static int ade7758_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + int ret; + + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: + if (val2) + return -EINVAL; + mutex_lock(&indio_dev->mlock); + ret = ade7758_write_samp_freq(&indio_dev->dev, val); + mutex_unlock(&indio_dev->mlock); + return ret; + default: + return -EINVAL; + } + + return ret; } static IIO_DEV_ATTR_TEMP_RAW(ade7758_read_8bit); @@ -553,17 +581,12 @@ static IIO_DEV_ATTR_BVAHR(ade7758_read_16bit, static IIO_DEV_ATTR_CVAHR(ade7758_read_16bit, ADE7758_CVAHR); -static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO, - ade7758_read_frequency, - ade7758_write_frequency); - static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("26040 13020 6510 3255"); static struct attribute *ade7758_attributes[] = { &iio_dev_attr_in_temp_raw.dev_attr.attr, &iio_const_attr_in_temp_offset.dev_attr.attr, &iio_const_attr_in_temp_scale.dev_attr.attr, - &iio_dev_attr_sampling_frequency.dev_attr.attr, &iio_const_attr_sampling_frequency_available.dev_attr.attr, &iio_dev_attr_awatthr.dev_attr.attr, &iio_dev_attr_bwatthr.dev_attr.attr, @@ -611,6 +634,7 @@ static const struct iio_chan_spec ade7758_channels[] = { .type = IIO_VOLTAGE, .indexed = 1, .channel = 0, + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), .address = AD7758_WT(AD7758_PHASE_A, AD7758_VOLTAGE), .scan_index = 0, .scan_type = { @@ -622,6 +646,7 @@ static const struct iio_chan_spec ade7758_channels[] = { .type = IIO_CURRENT, .indexed = 1, .channel = 0, + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), .address = AD7758_WT(AD7758_PHASE_A, AD7758_CURRENT), .scan_index = 1, .scan_type = { @@ -634,6 +659,7 @@ static const struct iio_chan_spec ade7758_channels[] = { .indexed = 1, .channel = 0, .extend_name = "apparent", + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), .address = AD7758_WT(AD7758_PHASE_A, AD7758_APP_PWR), .scan_index = 2, .scan_type = { @@ -646,6 +672,7 @@ static const struct iio_chan_spec ade7758_channels[] = { .indexed = 1, .channel = 0, .extend_name = "active", + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), .address = AD7758_WT(AD7758_PHASE_A, AD7758_ACT_PWR), .scan_index = 3, .scan_type = { @@ -658,6 +685,7 @@ static const struct iio_chan_spec ade7758_channels[] = { .indexed = 1, .channel = 0, .extend_name = "reactive", + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), .address = AD7758_WT(AD7758_PHASE_A, AD7758_REACT_PWR), .scan_index = 4, .scan_type = { @@ -669,6 +697,7 @@ static const struct iio_chan_spec ade7758_channels[] = { .type = IIO_VOLTAGE, .indexed = 1, .channel = 1, + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), .address = AD7758_WT(AD7758_PHASE_B, AD7758_VOLTAGE), .scan_index = 5, .scan_type = { @@ -680,6 +709,7 @@ static const struct iio_chan_spec ade7758_channels[] = { .type = IIO_CURRENT, .indexed = 1, .channel = 1, + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), .address = AD7758_WT(AD7758_PHASE_B, AD7758_CURRENT), .scan_index = 6, .scan_type = { @@ -692,6 +722,7 @@ static const struct iio_chan_spec ade7758_channels[] = { .indexed = 1, .channel = 1, .extend_name = "apparent", + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), .address = AD7758_WT(AD7758_PHASE_B, AD7758_APP_PWR), .scan_index = 7, .scan_type = { @@ -704,6 +735,7 @@ static const struct iio_chan_spec ade7758_channels[] = { .indexed = 1, .channel = 1, .extend_name = "active", + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), .address = AD7758_WT(AD7758_PHASE_B, AD7758_ACT_PWR), .scan_index = 8, .scan_type = { @@ -716,6 +748,7 @@ static const struct iio_chan_spec ade7758_channels[] = { .indexed = 1, .channel = 1, .extend_name = "reactive", + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), .address = AD7758_WT(AD7758_PHASE_B, AD7758_REACT_PWR), .scan_index = 9, .scan_type = { @@ -727,6 +760,7 @@ static const struct iio_chan_spec ade7758_channels[] = { .type = IIO_VOLTAGE, .indexed = 1, .channel = 2, + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), .address = AD7758_WT(AD7758_PHASE_C, AD7758_VOLTAGE), .scan_index = 10, .scan_type = { @@ -738,6 +772,7 @@ static const struct iio_chan_spec ade7758_channels[] = { .type = IIO_CURRENT, .indexed = 1, .channel = 2, + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), .address = AD7758_WT(AD7758_PHASE_C, AD7758_CURRENT), .scan_index = 11, .scan_type = { @@ -750,6 +785,7 @@ static const struct iio_chan_spec ade7758_channels[] = { .indexed = 1, .channel = 2, .extend_name = "apparent", + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), .address = AD7758_WT(AD7758_PHASE_C, AD7758_APP_PWR), .scan_index = 12, .scan_type = { @@ -762,6 +798,7 @@ static const struct iio_chan_spec ade7758_channels[] = { .indexed = 1, .channel = 2, .extend_name = "active", + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), .address = AD7758_WT(AD7758_PHASE_C, AD7758_ACT_PWR), .scan_index = 13, .scan_type = { @@ -774,6 +811,7 @@ static const struct iio_chan_spec ade7758_channels[] = { .indexed = 1, .channel = 2, .extend_name = "reactive", + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), .address = AD7758_WT(AD7758_PHASE_C, AD7758_REACT_PWR), .scan_index = 14, .scan_type = { @@ -787,6 +825,8 @@ static const struct iio_chan_spec ade7758_channels[] = { static const struct iio_info ade7758_info = { .attrs = &ade7758_attribute_group, + .read_raw = &ade7758_read_raw, + .write_raw = &ade7758_write_raw, .driver_module = THIS_MODULE, }; diff --git a/drivers/staging/iio/ring_hw.h b/drivers/staging/iio/ring_hw.h deleted file mode 100644 index 75bf47bfee78..000000000000 --- a/drivers/staging/iio/ring_hw.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * ring_hw.h - common functionality for iio hardware ring buffers - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - * - * Copyright (c) 2009 Jonathan Cameron <jic23@kernel.org> - * - */ - -#ifndef _RING_HW_H_ -#define _RING_HW_H_ - -/** - * struct iio_hw_ring_buffer- hardware ring buffer - * @buf: generic ring buffer elements - * @private: device specific data - */ -struct iio_hw_buffer { - struct iio_buffer buf; - void *private; -}; - -#define iio_to_hw_buf(r) container_of(r, struct iio_hw_buffer, buf) - -#endif /* _RING_HW_H_ */ |