summaryrefslogtreecommitdiffstats
path: root/drivers/tty/synclink.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty/synclink.c')
-rw-r--r--drivers/tty/synclink.c8119
1 files changed, 8119 insertions, 0 deletions
diff --git a/drivers/tty/synclink.c b/drivers/tty/synclink.c
new file mode 100644
index 000000000000..18888d005a0a
--- /dev/null
+++ b/drivers/tty/synclink.c
@@ -0,0 +1,8119 @@
+/*
+ * linux/drivers/char/synclink.c
+ *
+ * $Id: synclink.c,v 4.38 2005/11/07 16:30:34 paulkf Exp $
+ *
+ * Device driver for Microgate SyncLink ISA and PCI
+ * high speed multiprotocol serial adapters.
+ *
+ * written by Paul Fulghum for Microgate Corporation
+ * paulkf@microgate.com
+ *
+ * Microgate and SyncLink are trademarks of Microgate Corporation
+ *
+ * Derived from serial.c written by Theodore Ts'o and Linus Torvalds
+ *
+ * Original release 01/11/99
+ *
+ * This code is released under the GNU General Public License (GPL)
+ *
+ * This driver is primarily intended for use in synchronous
+ * HDLC mode. Asynchronous mode is also provided.
+ *
+ * When operating in synchronous mode, each call to mgsl_write()
+ * contains exactly one complete HDLC frame. Calling mgsl_put_char
+ * will start assembling an HDLC frame that will not be sent until
+ * mgsl_flush_chars or mgsl_write is called.
+ *
+ * Synchronous receive data is reported as complete frames. To accomplish
+ * this, the TTY flip buffer is bypassed (too small to hold largest
+ * frame and may fragment frames) and the line discipline
+ * receive entry point is called directly.
+ *
+ * This driver has been tested with a slightly modified ppp.c driver
+ * for synchronous PPP.
+ *
+ * 2000/02/16
+ * Added interface for syncppp.c driver (an alternate synchronous PPP
+ * implementation that also supports Cisco HDLC). Each device instance
+ * registers as a tty device AND a network device (if dosyncppp option
+ * is set for the device). The functionality is determined by which
+ * device interface is opened.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#if defined(__i386__)
+# define BREAKPOINT() asm(" int $3");
+#else
+# define BREAKPOINT() { }
+#endif
+
+#define MAX_ISA_DEVICES 10
+#define MAX_PCI_DEVICES 10
+#define MAX_TOTAL_DEVICES 20
+
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial.h>
+#include <linux/major.h>
+#include <linux/string.h>
+#include <linux/fcntl.h>
+#include <linux/ptrace.h>
+#include <linux/ioport.h>
+#include <linux/mm.h>
+#include <linux/seq_file.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/vmalloc.h>
+#include <linux/init.h>
+#include <linux/ioctl.h>
+#include <linux/synclink.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/dma.h>
+#include <linux/bitops.h>
+#include <asm/types.h>
+#include <linux/termios.h>
+#include <linux/workqueue.h>
+#include <linux/hdlc.h>
+#include <linux/dma-mapping.h>
+
+#if defined(CONFIG_HDLC) || (defined(CONFIG_HDLC_MODULE) && defined(CONFIG_SYNCLINK_MODULE))
+#define SYNCLINK_GENERIC_HDLC 1
+#else
+#define SYNCLINK_GENERIC_HDLC 0
+#endif
+
+#define GET_USER(error,value,addr) error = get_user(value,addr)
+#define COPY_FROM_USER(error,dest,src,size) error = copy_from_user(dest,src,size) ? -EFAULT : 0
+#define PUT_USER(error,value,addr) error = put_user(value,addr)
+#define COPY_TO_USER(error,dest,src,size) error = copy_to_user(dest,src,size) ? -EFAULT : 0
+
+#include <asm/uaccess.h>
+
+#define RCLRVALUE 0xffff
+
+static MGSL_PARAMS default_params = {
+ MGSL_MODE_HDLC, /* unsigned long mode */
+ 0, /* unsigned char loopback; */
+ HDLC_FLAG_UNDERRUN_ABORT15, /* unsigned short flags; */
+ HDLC_ENCODING_NRZI_SPACE, /* unsigned char encoding; */
+ 0, /* unsigned long clock_speed; */
+ 0xff, /* unsigned char addr_filter; */
+ HDLC_CRC_16_CCITT, /* unsigned short crc_type; */
+ HDLC_PREAMBLE_LENGTH_8BITS, /* unsigned char preamble_length; */
+ HDLC_PREAMBLE_PATTERN_NONE, /* unsigned char preamble; */
+ 9600, /* unsigned long data_rate; */
+ 8, /* unsigned char data_bits; */
+ 1, /* unsigned char stop_bits; */
+ ASYNC_PARITY_NONE /* unsigned char parity; */
+};
+
+#define SHARED_MEM_ADDRESS_SIZE 0x40000
+#define BUFFERLISTSIZE 4096
+#define DMABUFFERSIZE 4096
+#define MAXRXFRAMES 7
+
+typedef struct _DMABUFFERENTRY
+{
+ u32 phys_addr; /* 32-bit flat physical address of data buffer */
+ volatile u16 count; /* buffer size/data count */
+ volatile u16 status; /* Control/status field */
+ volatile u16 rcc; /* character count field */
+ u16 reserved; /* padding required by 16C32 */
+ u32 link; /* 32-bit flat link to next buffer entry */
+ char *virt_addr; /* virtual address of data buffer */
+ u32 phys_entry; /* physical address of this buffer entry */
+ dma_addr_t dma_addr;
+} DMABUFFERENTRY, *DMAPBUFFERENTRY;
+
+/* The queue of BH actions to be performed */
+
+#define BH_RECEIVE 1
+#define BH_TRANSMIT 2
+#define BH_STATUS 4
+
+#define IO_PIN_SHUTDOWN_LIMIT 100
+
+struct _input_signal_events {
+ int ri_up;
+ int ri_down;
+ int dsr_up;
+ int dsr_down;
+ int dcd_up;
+ int dcd_down;
+ int cts_up;
+ int cts_down;
+};
+
+/* transmit holding buffer definitions*/
+#define MAX_TX_HOLDING_BUFFERS 5
+struct tx_holding_buffer {
+ int buffer_size;
+ unsigned char * buffer;
+};
+
+
+/*
+ * Device instance data structure
+ */
+
+struct mgsl_struct {
+ int magic;
+ struct tty_port port;
+ int line;
+ int hw_version;
+
+ struct mgsl_icount icount;
+
+ int timeout;
+ int x_char; /* xon/xoff character */
+ u16 read_status_mask;
+ u16 ignore_status_mask;
+ unsigned char *xmit_buf;
+ int xmit_head;
+ int xmit_tail;
+ int xmit_cnt;
+
+ wait_queue_head_t status_event_wait_q;
+ wait_queue_head_t event_wait_q;
+ struct timer_list tx_timer; /* HDLC transmit timeout timer */
+ struct mgsl_struct *next_device; /* device list link */
+
+ spinlock_t irq_spinlock; /* spinlock for synchronizing with ISR */
+ struct work_struct task; /* task structure for scheduling bh */
+
+ u32 EventMask; /* event trigger mask */
+ u32 RecordedEvents; /* pending events */
+
+ u32 max_frame_size; /* as set by device config */
+
+ u32 pending_bh;
+
+ bool bh_running; /* Protection from multiple */
+ int isr_overflow;
+ bool bh_requested;
+
+ int dcd_chkcount; /* check counts to prevent */
+ int cts_chkcount; /* too many IRQs if a signal */
+ int dsr_chkcount; /* is floating */
+ int ri_chkcount;
+
+ char *buffer_list; /* virtual address of Rx & Tx buffer lists */
+ u32 buffer_list_phys;
+ dma_addr_t buffer_list_dma_addr;
+
+ unsigned int rx_buffer_count; /* count of total allocated Rx buffers */
+ DMABUFFERENTRY *rx_buffer_list; /* list of receive buffer entries */
+ unsigned int current_rx_buffer;
+
+ int num_tx_dma_buffers; /* number of tx dma frames required */
+ int tx_dma_buffers_used;
+ unsigned int tx_buffer_count; /* count of total allocated Tx buffers */
+ DMABUFFERENTRY *tx_buffer_list; /* list of transmit buffer entries */
+ int start_tx_dma_buffer; /* tx dma buffer to start tx dma operation */
+ int current_tx_buffer; /* next tx dma buffer to be loaded */
+
+ unsigned char *intermediate_rxbuffer;
+
+ int num_tx_holding_buffers; /* number of tx holding buffer allocated */
+ int get_tx_holding_index; /* next tx holding buffer for adapter to load */
+ int put_tx_holding_index; /* next tx holding buffer to store user request */
+ int tx_holding_count; /* number of tx holding buffers waiting */
+ struct tx_holding_buffer tx_holding_buffers[MAX_TX_HOLDING_BUFFERS];
+
+ bool rx_enabled;
+ bool rx_overflow;
+ bool rx_rcc_underrun;
+
+ bool tx_enabled;
+ bool tx_active;
+ u32 idle_mode;
+
+ u16 cmr_value;
+ u16 tcsr_value;
+
+ char device_name[25]; /* device instance name */
+
+ unsigned int bus_type; /* expansion bus type (ISA,EISA,PCI) */
+ unsigned char bus; /* expansion bus number (zero based) */
+ unsigned char function; /* PCI device number */
+
+ unsigned int io_base; /* base I/O address of adapter */
+ unsigned int io_addr_size; /* size of the I/O address range */
+ bool io_addr_requested; /* true if I/O address requested */
+
+ unsigned int irq_level; /* interrupt level */
+ unsigned long irq_flags;
+ bool irq_requested; /* true if IRQ requested */
+
+ unsigned int dma_level; /* DMA channel */
+ bool dma_requested; /* true if dma channel requested */
+
+ u16 mbre_bit;
+ u16 loopback_bits;
+ u16 usc_idle_mode;
+
+ MGSL_PARAMS params; /* communications parameters */
+
+ unsigned char serial_signals; /* current serial signal states */
+
+ bool irq_occurred; /* for diagnostics use */
+ unsigned int init_error; /* Initialization startup error (DIAGS) */
+ int fDiagnosticsmode; /* Driver in Diagnostic mode? (DIAGS) */
+
+ u32 last_mem_alloc;
+ unsigned char* memory_base; /* shared memory address (PCI only) */
+ u32 phys_memory_base;
+ bool shared_mem_requested;
+
+ unsigned char* lcr_base; /* local config registers (PCI only) */
+ u32 phys_lcr_base;
+ u32 lcr_offset;
+ bool lcr_mem_requested;
+
+ u32 misc_ctrl_value;
+ char flag_buf[MAX_ASYNC_BUFFER_SIZE];
+ char char_buf[MAX_ASYNC_BUFFER_SIZE];
+ bool drop_rts_on_tx_done;
+
+ bool loopmode_insert_requested;
+ bool loopmode_send_done_requested;
+
+ struct _input_signal_events input_signal_events;
+
+ /* generic HDLC device parts */
+ int netcount;
+ spinlock_t netlock;
+
+#if SYNCLINK_GENERIC_HDLC
+ struct net_device *netdev;
+#endif
+};
+
+#define MGSL_MAGIC 0x5401
+
+/*
+ * The size of the serial xmit buffer is 1 page, or 4096 bytes
+ */
+#ifndef SERIAL_XMIT_SIZE
+#define SERIAL_XMIT_SIZE 4096
+#endif
+
+/*
+ * These macros define the offsets used in calculating the
+ * I/O address of the specified USC registers.
+ */
+
+
+#define DCPIN 2 /* Bit 1 of I/O address */
+#define SDPIN 4 /* Bit 2 of I/O address */
+
+#define DCAR 0 /* DMA command/address register */
+#define CCAR SDPIN /* channel command/address register */
+#define DATAREG DCPIN + SDPIN /* serial data register */
+#define MSBONLY 0x41
+#define LSBONLY 0x40
+
+/*
+ * These macros define the register address (ordinal number)
+ * used for writing address/value pairs to the USC.
+ */
+
+#define CMR 0x02 /* Channel mode Register */
+#define CCSR 0x04 /* Channel Command/status Register */
+#define CCR 0x06 /* Channel Control Register */
+#define PSR 0x08 /* Port status Register */
+#define PCR 0x0a /* Port Control Register */
+#define TMDR 0x0c /* Test mode Data Register */
+#define TMCR 0x0e /* Test mode Control Register */
+#define CMCR 0x10 /* Clock mode Control Register */
+#define HCR 0x12 /* Hardware Configuration Register */
+#define IVR 0x14 /* Interrupt Vector Register */
+#define IOCR 0x16 /* Input/Output Control Register */
+#define ICR 0x18 /* Interrupt Control Register */
+#define DCCR 0x1a /* Daisy Chain Control Register */
+#define MISR 0x1c /* Misc Interrupt status Register */
+#define SICR 0x1e /* status Interrupt Control Register */
+#define RDR 0x20 /* Receive Data Register */
+#define RMR 0x22 /* Receive mode Register */
+#define RCSR 0x24 /* Receive Command/status Register */
+#define RICR 0x26 /* Receive Interrupt Control Register */
+#define RSR 0x28 /* Receive Sync Register */
+#define RCLR 0x2a /* Receive count Limit Register */
+#define RCCR 0x2c /* Receive Character count Register */
+#define TC0R 0x2e /* Time Constant 0 Register */
+#define TDR 0x30 /* Transmit Data Register */
+#define TMR 0x32 /* Transmit mode Register */
+#define TCSR 0x34 /* Transmit Command/status Register */
+#define TICR 0x36 /* Transmit Interrupt Control Register */
+#define TSR 0x38 /* Transmit Sync Register */
+#define TCLR 0x3a /* Transmit count Limit Register */
+#define TCCR 0x3c /* Transmit Character count Register */
+#define TC1R 0x3e /* Time Constant 1 Register */
+
+
+/*
+ * MACRO DEFINITIONS FOR DMA REGISTERS
+ */
+
+#define DCR 0x06 /* DMA Control Register (shared) */
+#define DACR 0x08 /* DMA Array count Register (shared) */
+#define BDCR 0x12 /* Burst/Dwell Control Register (shared) */
+#define DIVR 0x14 /* DMA Interrupt Vector Register (shared) */
+#define DICR 0x18 /* DMA Interrupt Control Register (shared) */
+#define CDIR 0x1a /* Clear DMA Interrupt Register (shared) */
+#define SDIR 0x1c /* Set DMA Interrupt Register (shared) */
+
+#define TDMR 0x02 /* Transmit DMA mode Register */
+#define TDIAR 0x1e /* Transmit DMA Interrupt Arm Register */
+#define TBCR 0x2a /* Transmit Byte count Register */
+#define TARL 0x2c /* Transmit Address Register (low) */
+#define TARU 0x2e /* Transmit Address Register (high) */
+#define NTBCR 0x3a /* Next Transmit Byte count Register */
+#define NTARL 0x3c /* Next Transmit Address Register (low) */
+#define NTARU 0x3e /* Next Transmit Address Register (high) */
+
+#define RDMR 0x82 /* Receive DMA mode Register (non-shared) */
+#define RDIAR 0x9e /* Receive DMA Interrupt Arm Register */
+#define RBCR 0xaa /* Receive Byte count Register */
+#define RARL 0xac /* Receive Address Register (low) */
+#define RARU 0xae /* Receive Address Register (high) */
+#define NRBCR 0xba /* Next Receive Byte count Register */
+#define NRARL 0xbc /* Next Receive Address Register (low) */
+#define NRARU 0xbe /* Next Receive Address Register (high) */
+
+
+/*
+ * MACRO DEFINITIONS FOR MODEM STATUS BITS
+ */
+
+#define MODEMSTATUS_DTR 0x80
+#define MODEMSTATUS_DSR 0x40
+#define MODEMSTATUS_RTS 0x20
+#define MODEMSTATUS_CTS 0x10
+#define MODEMSTATUS_RI 0x04
+#define MODEMSTATUS_DCD 0x01
+
+
+/*
+ * Channel Command/Address Register (CCAR) Command Codes
+ */
+
+#define RTCmd_Null 0x0000
+#define RTCmd_ResetHighestIus 0x1000
+#define RTCmd_TriggerChannelLoadDma 0x2000
+#define RTCmd_TriggerRxDma 0x2800
+#define RTCmd_TriggerTxDma 0x3000
+#define RTCmd_TriggerRxAndTxDma 0x3800
+#define RTCmd_PurgeRxFifo 0x4800
+#define RTCmd_PurgeTxFifo 0x5000
+#define RTCmd_PurgeRxAndTxFifo 0x5800
+#define RTCmd_LoadRcc 0x6800
+#define RTCmd_LoadTcc 0x7000
+#define RTCmd_LoadRccAndTcc 0x7800
+#define RTCmd_LoadTC0 0x8800
+#define RTCmd_LoadTC1 0x9000
+#define RTCmd_LoadTC0AndTC1 0x9800
+#define RTCmd_SerialDataLSBFirst 0xa000
+#define RTCmd_SerialDataMSBFirst 0xa800
+#define RTCmd_SelectBigEndian 0xb000
+#define RTCmd_SelectLittleEndian 0xb800
+
+
+/*
+ * DMA Command/Address Register (DCAR) Command Codes
+ */
+
+#define DmaCmd_Null 0x0000
+#define DmaCmd_ResetTxChannel 0x1000
+#define DmaCmd_ResetRxChannel 0x1200
+#define DmaCmd_StartTxChannel 0x2000
+#define DmaCmd_StartRxChannel 0x2200
+#define DmaCmd_ContinueTxChannel 0x3000
+#define DmaCmd_ContinueRxChannel 0x3200
+#define DmaCmd_PauseTxChannel 0x4000
+#define DmaCmd_PauseRxChannel 0x4200
+#define DmaCmd_AbortTxChannel 0x5000
+#define DmaCmd_AbortRxChannel 0x5200
+#define DmaCmd_InitTxChannel 0x7000
+#define DmaCmd_InitRxChannel 0x7200
+#define DmaCmd_ResetHighestDmaIus 0x8000
+#define DmaCmd_ResetAllChannels 0x9000
+#define DmaCmd_StartAllChannels 0xa000
+#define DmaCmd_ContinueAllChannels 0xb000
+#define DmaCmd_PauseAllChannels 0xc000
+#define DmaCmd_AbortAllChannels 0xd000
+#define DmaCmd_InitAllChannels 0xf000
+
+#define TCmd_Null 0x0000
+#define TCmd_ClearTxCRC 0x2000
+#define TCmd_SelectTicrTtsaData 0x4000
+#define TCmd_SelectTicrTxFifostatus 0x5000
+#define TCmd_SelectTicrIntLevel 0x6000
+#define TCmd_SelectTicrdma_level 0x7000
+#define TCmd_SendFrame 0x8000
+#define TCmd_SendAbort 0x9000
+#define TCmd_EnableDleInsertion 0xc000
+#define TCmd_DisableDleInsertion 0xd000
+#define TCmd_ClearEofEom 0xe000
+#define TCmd_SetEofEom 0xf000
+
+#define RCmd_Null 0x0000
+#define RCmd_ClearRxCRC 0x2000
+#define RCmd_EnterHuntmode 0x3000
+#define RCmd_SelectRicrRtsaData 0x4000
+#define RCmd_SelectRicrRxFifostatus 0x5000
+#define RCmd_SelectRicrIntLevel 0x6000
+#define RCmd_SelectRicrdma_level 0x7000
+
+/*
+ * Bits for enabling and disabling IRQs in Interrupt Control Register (ICR)
+ */
+
+#define RECEIVE_STATUS BIT5
+#define RECEIVE_DATA BIT4
+#define TRANSMIT_STATUS BIT3
+#define TRANSMIT_DATA BIT2
+#define IO_PIN BIT1
+#define MISC BIT0
+
+
+/*
+ * Receive status Bits in Receive Command/status Register RCSR
+ */
+
+#define RXSTATUS_SHORT_FRAME BIT8
+#define RXSTATUS_CODE_VIOLATION BIT8
+#define RXSTATUS_EXITED_HUNT BIT7
+#define RXSTATUS_IDLE_RECEIVED BIT6
+#define RXSTATUS_BREAK_RECEIVED BIT5
+#define RXSTATUS_ABORT_RECEIVED BIT5
+#define RXSTATUS_RXBOUND BIT4
+#define RXSTATUS_CRC_ERROR BIT3
+#define RXSTATUS_FRAMING_ERROR BIT3
+#define RXSTATUS_ABORT BIT2
+#define RXSTATUS_PARITY_ERROR BIT2
+#define RXSTATUS_OVERRUN BIT1
+#define RXSTATUS_DATA_AVAILABLE BIT0
+#define RXSTATUS_ALL 0x01f6
+#define usc_UnlatchRxstatusBits(a,b) usc_OutReg( (a), RCSR, (u16)((b) & RXSTATUS_ALL) )
+
+/*
+ * Values for setting transmit idle mode in
+ * Transmit Control/status Register (TCSR)
+ */
+#define IDLEMODE_FLAGS 0x0000
+#define IDLEMODE_ALT_ONE_ZERO 0x0100
+#define IDLEMODE_ZERO 0x0200
+#define IDLEMODE_ONE 0x0300
+#define IDLEMODE_ALT_MARK_SPACE 0x0500
+#define IDLEMODE_SPACE 0x0600
+#define IDLEMODE_MARK 0x0700
+#define IDLEMODE_MASK 0x0700
+
+/*
+ * IUSC revision identifiers
+ */
+#define IUSC_SL1660 0x4d44
+#define IUSC_PRE_SL1660 0x4553
+
+/*
+ * Transmit status Bits in Transmit Command/status Register (TCSR)
+ */
+
+#define TCSR_PRESERVE 0x0F00
+
+#define TCSR_UNDERWAIT BIT11
+#define TXSTATUS_PREAMBLE_SENT BIT7
+#define TXSTATUS_IDLE_SENT BIT6
+#define TXSTATUS_ABORT_SENT BIT5
+#define TXSTATUS_EOF_SENT BIT4
+#define TXSTATUS_EOM_SENT BIT4
+#define TXSTATUS_CRC_SENT BIT3
+#define TXSTATUS_ALL_SENT BIT2
+#define TXSTATUS_UNDERRUN BIT1
+#define TXSTATUS_FIFO_EMPTY BIT0
+#define TXSTATUS_ALL 0x00fa
+#define usc_UnlatchTxstatusBits(a,b) usc_OutReg( (a), TCSR, (u16)((a)->tcsr_value + ((b) & 0x00FF)) )
+
+
+#define MISCSTATUS_RXC_LATCHED BIT15
+#define MISCSTATUS_RXC BIT14
+#define MISCSTATUS_TXC_LATCHED BIT13
+#define MISCSTATUS_TXC BIT12
+#define MISCSTATUS_RI_LATCHED BIT11
+#define MISCSTATUS_RI BIT10
+#define MISCSTATUS_DSR_LATCHED BIT9
+#define MISCSTATUS_DSR BIT8
+#define MISCSTATUS_DCD_LATCHED BIT7
+#define MISCSTATUS_DCD BIT6
+#define MISCSTATUS_CTS_LATCHED BIT5
+#define MISCSTATUS_CTS BIT4
+#define MISCSTATUS_RCC_UNDERRUN BIT3
+#define MISCSTATUS_DPLL_NO_SYNC BIT2
+#define MISCSTATUS_BRG1_ZERO BIT1
+#define MISCSTATUS_BRG0_ZERO BIT0
+
+#define usc_UnlatchIostatusBits(a,b) usc_OutReg((a),MISR,(u16)((b) & 0xaaa0))
+#define usc_UnlatchMiscstatusBits(a,b) usc_OutReg((a),MISR,(u16)((b) & 0x000f))
+
+#define SICR_RXC_ACTIVE BIT15
+#define SICR_RXC_INACTIVE BIT14
+#define SICR_RXC (BIT15+BIT14)
+#define SICR_TXC_ACTIVE BIT13
+#define SICR_TXC_INACTIVE BIT12
+#define SICR_TXC (BIT13+BIT12)
+#define SICR_RI_ACTIVE BIT11
+#define SICR_RI_INACTIVE BIT10
+#define SICR_RI (BIT11+BIT10)
+#define SICR_DSR_ACTIVE BIT9
+#define SICR_DSR_INACTIVE BIT8
+#define SICR_DSR (BIT9+BIT8)
+#define SICR_DCD_ACTIVE BIT7
+#define SICR_DCD_INACTIVE BIT6
+#define SICR_DCD (BIT7+BIT6)
+#define SICR_CTS_ACTIVE BIT5
+#define SICR_CTS_INACTIVE BIT4
+#define SICR_CTS (BIT5+BIT4)
+#define SICR_RCC_UNDERFLOW BIT3
+#define SICR_DPLL_NO_SYNC BIT2
+#define SICR_BRG1_ZERO BIT1
+#define SICR_BRG0_ZERO BIT0
+
+void usc_DisableMasterIrqBit( struct mgsl_struct *info );
+void usc_EnableMasterIrqBit( struct mgsl_struct *info );
+void usc_EnableInterrupts( struct mgsl_struct *info, u16 IrqMask );
+void usc_DisableInterrupts( struct mgsl_struct *info, u16 IrqMask );
+void usc_ClearIrqPendingBits( struct mgsl_struct *info, u16 IrqMask );
+
+#define usc_EnableInterrupts( a, b ) \
+ usc_OutReg( (a), ICR, (u16)((usc_InReg((a),ICR) & 0xff00) + 0xc0 + (b)) )
+
+#define usc_DisableInterrupts( a, b ) \
+ usc_OutReg( (a), ICR, (u16)((usc_InReg((a),ICR) & 0xff00) + 0x80 + (b)) )
+
+#define usc_EnableMasterIrqBit(a) \
+ usc_OutReg( (a), ICR, (u16)((usc_InReg((a),ICR) & 0x0f00) + 0xb000) )
+
+#define usc_DisableMasterIrqBit(a) \
+ usc_OutReg( (a), ICR, (u16)(usc_InReg((a),ICR) & 0x7f00) )
+
+#define usc_ClearIrqPendingBits( a, b ) usc_OutReg( (a), DCCR, 0x40 + (b) )
+
+/*
+ * Transmit status Bits in Transmit Control status Register (TCSR)
+ * and Transmit Interrupt Control Register (TICR) (except BIT2, BIT0)
+ */
+
+#define TXSTATUS_PREAMBLE_SENT BIT7
+#define TXSTATUS_IDLE_SENT BIT6
+#define TXSTATUS_ABORT_SENT BIT5
+#define TXSTATUS_EOF BIT4
+#define TXSTATUS_CRC_SENT BIT3
+#define TXSTATUS_ALL_SENT BIT2
+#define TXSTATUS_UNDERRUN BIT1
+#define TXSTATUS_FIFO_EMPTY BIT0
+
+#define DICR_MASTER BIT15
+#define DICR_TRANSMIT BIT0
+#define DICR_RECEIVE BIT1
+
+#define usc_EnableDmaInterrupts(a,b) \
+ usc_OutDmaReg( (a), DICR, (u16)(usc_InDmaReg((a),DICR) | (b)) )
+
+#define usc_DisableDmaInterrupts(a,b) \
+ usc_OutDmaReg( (a), DICR, (u16)(usc_InDmaReg((a),DICR) & ~(b)) )
+
+#define usc_EnableStatusIrqs(a,b) \
+ usc_OutReg( (a), SICR, (u16)(usc_InReg((a),SICR) | (b)) )
+
+#define usc_DisablestatusIrqs(a,b) \
+ usc_OutReg( (a), SICR, (u16)(usc_InReg((a),SICR) & ~(b)) )
+
+/* Transmit status Bits in Transmit Control status Register (TCSR) */
+/* and Transmit Interrupt Control Register (TICR) (except BIT2, BIT0) */
+
+
+#define DISABLE_UNCONDITIONAL 0
+#define DISABLE_END_OF_FRAME 1
+#define ENABLE_UNCONDITIONAL 2
+#define ENABLE_AUTO_CTS 3
+#define ENABLE_AUTO_DCD 3
+#define usc_EnableTransmitter(a,b) \
+ usc_OutReg( (a), TMR, (u16)((usc_InReg((a),TMR) & 0xfffc) | (b)) )
+#define usc_EnableReceiver(a,b) \
+ usc_OutReg( (a), RMR, (u16)((usc_InReg((a),RMR) & 0xfffc) | (b)) )
+
+static u16 usc_InDmaReg( struct mgsl_struct *info, u16 Port );
+static void usc_OutDmaReg( struct mgsl_struct *info, u16 Port, u16 Value );
+static void usc_DmaCmd( struct mgsl_struct *info, u16 Cmd );
+
+static u16 usc_InReg( struct mgsl_struct *info, u16 Port );
+static void usc_OutReg( struct mgsl_struct *info, u16 Port, u16 Value );
+static void usc_RTCmd( struct mgsl_struct *info, u16 Cmd );
+void usc_RCmd( struct mgsl_struct *info, u16 Cmd );
+void usc_TCmd( struct mgsl_struct *info, u16 Cmd );
+
+#define usc_TCmd(a,b) usc_OutReg((a), TCSR, (u16)((a)->tcsr_value + (b)))
+#define usc_RCmd(a,b) usc_OutReg((a), RCSR, (b))
+
+#define usc_SetTransmitSyncChars(a,s0,s1) usc_OutReg((a), TSR, (u16)(((u16)s0<<8)|(u16)s1))
+
+static void usc_process_rxoverrun_sync( struct mgsl_struct *info );
+static void usc_start_receiver( struct mgsl_struct *info );
+static void usc_stop_receiver( struct mgsl_struct *info );
+
+static void usc_start_transmitter( struct mgsl_struct *info );
+static void usc_stop_transmitter( struct mgsl_struct *info );
+static void usc_set_txidle( struct mgsl_struct *info );
+static void usc_load_txfifo( struct mgsl_struct *info );
+
+static void usc_enable_aux_clock( struct mgsl_struct *info, u32 DataRate );
+static void usc_enable_loopback( struct mgsl_struct *info, int enable );
+
+static void usc_get_serial_signals( struct mgsl_struct *info );
+static void usc_set_serial_signals( struct mgsl_struct *info );
+
+static void usc_reset( struct mgsl_struct *info );
+
+static void usc_set_sync_mode( struct mgsl_struct *info );
+static void usc_set_sdlc_mode( struct mgsl_struct *info );
+static void usc_set_async_mode( struct mgsl_struct *info );
+static void usc_enable_async_clock( struct mgsl_struct *info, u32 DataRate );
+
+static void usc_loopback_frame( struct mgsl_struct *info );
+
+static void mgsl_tx_timeout(unsigned long context);
+
+
+static void usc_loopmode_cancel_transmit( struct mgsl_struct * info );
+static void usc_loopmode_insert_request( struct mgsl_struct * info );
+static int usc_loopmode_active( struct mgsl_struct * info);
+static void usc_loopmode_send_done( struct mgsl_struct * info );
+
+static int mgsl_ioctl_common(struct mgsl_struct *info, unsigned int cmd, unsigned long arg);
+
+#if SYNCLINK_GENERIC_HDLC
+#define dev_to_port(D) (dev_to_hdlc(D)->priv)
+static void hdlcdev_tx_done(struct mgsl_struct *info);
+static void hdlcdev_rx(struct mgsl_struct *info, char *buf, int size);
+static int hdlcdev_init(struct mgsl_struct *info);
+static void hdlcdev_exit(struct mgsl_struct *info);
+#endif
+
+/*
+ * Defines a BUS descriptor value for the PCI adapter
+ * local bus address ranges.
+ */
+
+#define BUS_DESCRIPTOR( WrHold, WrDly, RdDly, Nwdd, Nwad, Nxda, Nrdd, Nrad ) \
+(0x00400020 + \
+((WrHold) << 30) + \
+((WrDly) << 28) + \
+((RdDly) << 26) + \
+((Nwdd) << 20) + \
+((Nwad) << 15) + \
+((Nxda) << 13) + \
+((Nrdd) << 11) + \
+((Nrad) << 6) )
+
+static void mgsl_trace_block(struct mgsl_struct *info,const char* data, int count, int xmit);
+
+/*
+ * Adapter diagnostic routines
+ */
+static bool mgsl_register_test( struct mgsl_struct *info );
+static bool mgsl_irq_test( struct mgsl_struct *info );
+static bool mgsl_dma_test( struct mgsl_struct *info );
+static bool mgsl_memory_test( struct mgsl_struct *info );
+static int mgsl_adapter_test( struct mgsl_struct *info );
+
+/*
+ * device and resource management routines
+ */
+static int mgsl_claim_resources(struct mgsl_struct *info);
+static void mgsl_release_resources(struct mgsl_struct *info);
+static void mgsl_add_device(struct mgsl_struct *info);
+static struct mgsl_struct* mgsl_allocate_device(void);
+
+/*
+ * DMA buffer manupulation functions.
+ */
+static void mgsl_free_rx_frame_buffers( struct mgsl_struct *info, unsigned int StartIndex, unsigned int EndIndex );
+static bool mgsl_get_rx_frame( struct mgsl_struct *info );
+static bool mgsl_get_raw_rx_frame( struct mgsl_struct *info );
+static void mgsl_reset_rx_dma_buffers( struct mgsl_struct *info );
+static void mgsl_reset_tx_dma_buffers( struct mgsl_struct *info );
+static int num_free_tx_dma_buffers(struct mgsl_struct *info);
+static void mgsl_load_tx_dma_buffer( struct mgsl_struct *info, const char *Buffer, unsigned int BufferSize);
+static void mgsl_load_pci_memory(char* TargetPtr, const char* SourcePtr, unsigned short count);
+
+/*
+ * DMA and Shared Memory buffer allocation and formatting
+ */
+static int mgsl_allocate_dma_buffers(struct mgsl_struct *info);
+static void mgsl_free_dma_buffers(struct mgsl_struct *info);
+static int mgsl_alloc_frame_memory(struct mgsl_struct *info, DMABUFFERENTRY *BufferList,int Buffercount);
+static void mgsl_free_frame_memory(struct mgsl_struct *info, DMABUFFERENTRY *BufferList,int Buffercount);
+static int mgsl_alloc_buffer_list_memory(struct mgsl_struct *info);
+static void mgsl_free_buffer_list_memory(struct mgsl_struct *info);
+static int mgsl_alloc_intermediate_rxbuffer_memory(struct mgsl_struct *info);
+static void mgsl_free_intermediate_rxbuffer_memory(struct mgsl_struct *info);
+static int mgsl_alloc_intermediate_txbuffer_memory(struct mgsl_struct *info);
+static void mgsl_free_intermediate_txbuffer_memory(struct mgsl_struct *info);
+static bool load_next_tx_holding_buffer(struct mgsl_struct *info);
+static int save_tx_buffer_request(struct mgsl_struct *info,const char *Buffer, unsigned int BufferSize);
+
+/*
+ * Bottom half interrupt handlers
+ */
+static void mgsl_bh_handler(struct work_struct *work);
+static void mgsl_bh_receive(struct mgsl_struct *info);
+static void mgsl_bh_transmit(struct mgsl_struct *info);
+static void mgsl_bh_status(struct mgsl_struct *info);
+
+/*
+ * Interrupt handler routines and dispatch table.
+ */
+static void mgsl_isr_null( struct mgsl_struct *info );
+static void mgsl_isr_transmit_data( struct mgsl_struct *info );
+static void mgsl_isr_receive_data( struct mgsl_struct *info );
+static void mgsl_isr_receive_status( struct mgsl_struct *info );
+static void mgsl_isr_transmit_status( struct mgsl_struct *info );
+static void mgsl_isr_io_pin( struct mgsl_struct *info );
+static void mgsl_isr_misc( struct mgsl_struct *info );
+static void mgsl_isr_receive_dma( struct mgsl_struct *info );
+static void mgsl_isr_transmit_dma( struct mgsl_struct *info );
+
+typedef void (*isr_dispatch_func)(struct mgsl_struct *);
+
+static isr_dispatch_func UscIsrTable[7] =
+{
+ mgsl_isr_null,
+ mgsl_isr_misc,
+ mgsl_isr_io_pin,
+ mgsl_isr_transmit_data,
+ mgsl_isr_transmit_status,
+ mgsl_isr_receive_data,
+ mgsl_isr_receive_status
+};
+
+/*
+ * ioctl call handlers
+ */
+static int tiocmget(struct tty_struct *tty);
+static int tiocmset(struct tty_struct *tty,
+ unsigned int set, unsigned int clear);
+static int mgsl_get_stats(struct mgsl_struct * info, struct mgsl_icount
+ __user *user_icount);
+static int mgsl_get_params(struct mgsl_struct * info, MGSL_PARAMS __user *user_params);
+static int mgsl_set_params(struct mgsl_struct * info, MGSL_PARAMS __user *new_params);
+static int mgsl_get_txidle(struct mgsl_struct * info, int __user *idle_mode);
+static int mgsl_set_txidle(struct mgsl_struct * info, int idle_mode);
+static int mgsl_txenable(struct mgsl_struct * info, int enable);
+static int mgsl_txabort(struct mgsl_struct * info);
+static int mgsl_rxenable(struct mgsl_struct * info, int enable);
+static int mgsl_wait_event(struct mgsl_struct * info, int __user *mask);
+static int mgsl_loopmode_send_done( struct mgsl_struct * info );
+
+/* set non-zero on successful registration with PCI subsystem */
+static bool pci_registered;
+
+/*
+ * Global linked list of SyncLink devices
+ */
+static struct mgsl_struct *mgsl_device_list;
+static int mgsl_device_count;
+
+/*
+ * Set this param to non-zero to load eax with the
+ * .text section address and breakpoint on module load.
+ * This is useful for use with gdb and add-symbol-file command.
+ */
+static int break_on_load;
+
+/*
+ * Driver major number, defaults to zero to get auto
+ * assigned major number. May be forced as module parameter.
+ */
+static int ttymajor;
+
+/*
+ * Array of user specified options for ISA adapters.
+ */
+static int io[MAX_ISA_DEVICES];
+static int irq[MAX_ISA_DEVICES];
+static int dma[MAX_ISA_DEVICES];
+static int debug_level;
+static int maxframe[MAX_TOTAL_DEVICES];
+static int txdmabufs[MAX_TOTAL_DEVICES];
+static int txholdbufs[MAX_TOTAL_DEVICES];
+
+module_param(break_on_load, bool, 0);
+module_param(ttymajor, int, 0);
+module_param_array(io, int, NULL, 0);
+module_param_array(irq, int, NULL, 0);
+module_param_array(dma, int, NULL, 0);
+module_param(debug_level, int, 0);
+module_param_array(maxframe, int, NULL, 0);
+module_param_array(txdmabufs, int, NULL, 0);
+module_param_array(txholdbufs, int, NULL, 0);
+
+static char *driver_name = "SyncLink serial driver";
+static char *driver_version = "$Revision: 4.38 $";
+
+static int synclink_init_one (struct pci_dev *dev,
+ const struct pci_device_id *ent);
+static void synclink_remove_one (struct pci_dev *dev);
+
+static struct pci_device_id synclink_pci_tbl[] = {
+ { PCI_VENDOR_ID_MICROGATE, PCI_DEVICE_ID_MICROGATE_USC, PCI_ANY_ID, PCI_ANY_ID, },
+ { PCI_VENDOR_ID_MICROGATE, 0x0210, PCI_ANY_ID, PCI_ANY_ID, },
+ { 0, }, /* terminate list */
+};
+MODULE_DEVICE_TABLE(pci, synclink_pci_tbl);
+
+MODULE_LICENSE("GPL");
+
+static struct pci_driver synclink_pci_driver = {
+ .name = "synclink",
+ .id_table = synclink_pci_tbl,
+ .probe = synclink_init_one,
+ .remove = __devexit_p(synclink_remove_one),
+};
+
+static struct tty_driver *serial_driver;
+
+/* number of characters left in xmit buffer before we ask for more */
+#define WAKEUP_CHARS 256
+
+
+static void mgsl_change_params(struct mgsl_struct *info);
+static void mgsl_wait_until_sent(struct tty_struct *tty, int timeout);
+
+/*
+ * 1st function defined in .text section. Calling this function in
+ * init_module() followed by a breakpoint allows a remote debugger
+ * (gdb) to get the .text address for the add-symbol-file command.
+ * This allows remote debugging of dynamically loadable modules.
+ */
+static void* mgsl_get_text_ptr(void)
+{
+ return mgsl_get_text_ptr;
+}
+
+static inline int mgsl_paranoia_check(struct mgsl_struct *info,
+ char *name, const char *routine)
+{
+#ifdef MGSL_PARANOIA_CHECK
+ static const char *badmagic =
+ "Warning: bad magic number for mgsl struct (%s) in %s\n";
+ static const char *badinfo =
+ "Warning: null mgsl_struct for (%s) in %s\n";
+
+ if (!info) {
+ printk(badinfo, name, routine);
+ return 1;
+ }
+ if (info->magic != MGSL_MAGIC) {
+ printk(badmagic, name, routine);
+ return 1;
+ }
+#else
+ if (!info)
+ return 1;
+#endif
+ return 0;
+}
+
+/**
+ * line discipline callback wrappers
+ *
+ * The wrappers maintain line discipline references
+ * while calling into the line discipline.
+ *
+ * ldisc_receive_buf - pass receive data to line discipline
+ */
+
+static void ldisc_receive_buf(struct tty_struct *tty,
+ const __u8 *data, char *flags, int count)
+{
+ struct tty_ldisc *ld;
+ if (!tty)
+ return;
+ ld = tty_ldisc_ref(tty);
+ if (ld) {
+ if (ld->ops->receive_buf)
+ ld->ops->receive_buf(tty, data, flags, count);
+ tty_ldisc_deref(ld);
+ }
+}
+
+/* mgsl_stop() throttle (stop) transmitter
+ *
+ * Arguments: tty pointer to tty info structure
+ * Return Value: None
+ */
+static void mgsl_stop(struct tty_struct *tty)
+{
+ struct mgsl_struct *info = tty->driver_data;
+ unsigned long flags;
+
+ if (mgsl_paranoia_check(info, tty->name, "mgsl_stop"))
+ return;
+
+ if ( debug_level >= DEBUG_LEVEL_INFO )
+ printk("mgsl_stop(%s)\n",info->device_name);
+
+ spin_lock_irqsave(&info->irq_spinlock,flags);
+ if (info->tx_enabled)
+ usc_stop_transmitter(info);
+ spin_unlock_irqrestore(&info->irq_spinlock,flags);
+
+} /* end of mgsl_stop() */
+
+/* mgsl_start() release (start) transmitter
+ *
+ * Arguments: tty pointer to tty info structure
+ * Return Value: None
+ */
+static void mgsl_start(struct tty_struct *tty)
+{
+ struct mgsl_struct *info = tty->driver_data;
+ unsigned long flags;
+
+ if (mgsl_paranoia_check(info, tty->name, "mgsl_start"))
+ return;
+
+ if ( debug_level >= DEBUG_LEVEL_INFO )
+ printk("mgsl_start(%s)\n",info->device_name);
+
+ spin_lock_irqsave(&info->irq_spinlock,flags);
+ if (!info->tx_enabled)
+ usc_start_transmitter(info);
+ spin_unlock_irqrestore(&info->irq_spinlock,flags);
+
+} /* end of mgsl_start() */
+
+/*
+ * Bottom half work queue access functions
+ */
+
+/* mgsl_bh_action() Return next bottom half action to perform.
+ * Return Value: BH action code or 0 if nothing to do.
+ */
+static int mgsl_bh_action(struct mgsl_struct *info)
+{
+ unsigned long flags;
+ int rc = 0;
+
+ spin_lock_irqsave(&info->irq_spinlock,flags);
+
+ if (info->pending_bh & BH_RECEIVE) {
+ info->pending_bh &= ~BH_RECEIVE;
+ rc = BH_RECEIVE;
+ } else if (info->pending_bh & BH_TRANSMIT) {
+ info->pending_bh &= ~BH_TRANSMIT;
+ rc = BH_TRANSMIT;
+ } else if (info->pending_bh & BH_STATUS) {
+ info->pending_bh &= ~BH_STATUS;
+ rc = BH_STATUS;
+ }
+
+ if (!rc) {
+ /* Mark BH routine as complete */
+ info->bh_running = false;
+ info->bh_requested = false;
+ }
+
+ spin_unlock_irqrestore(&info->irq_spinlock,flags);
+
+ return rc;
+}
+
+/*
+ * Perform bottom half processing of work items queued by ISR.
+ */
+static void mgsl_bh_handler(struct work_struct *work)
+{
+ struct mgsl_struct *info =
+ container_of(work, struct mgsl_struct, task);
+ int action;
+
+ if (!info)
+ return;
+
+ if ( debug_level >= DEBUG_LEVEL_BH )
+ printk( "%s(%d):mgsl_bh_handler(%s) entry\n",
+ __FILE__,__LINE__,info->device_name);
+
+ info->bh_running = true;
+
+ while((action = mgsl_bh_action(info)) != 0) {
+
+ /* Process work item */
+ if ( debug_level >= DEBUG_LEVEL_BH )
+ printk( "%s(%d):mgsl_bh_handler() work item action=%d\n",
+ __FILE__,__LINE__,action);
+
+ switch (action) {
+
+ case BH_RECEIVE:
+ mgsl_bh_receive(info);
+ break;
+ case BH_TRANSMIT:
+ mgsl_bh_transmit(info);
+ break;
+ case BH_STATUS:
+ mgsl_bh_status(info);
+ break;
+ default:
+ /* unknown work item ID */
+ printk("Unknown work item ID=%08X!\n", action);
+ break;
+ }
+ }
+
+ if ( debug_level >= DEBUG_LEVEL_BH )
+ printk( "%s(%d):mgsl_bh_handler(%s) exit\n",
+ __FILE__,__LINE__,info->device_name);
+}
+
+static void mgsl_bh_receive(struct mgsl_struct *info)
+{
+ bool (*get_rx_frame)(struct mgsl_struct *info) =
+ (info->params.mode == MGSL_MODE_HDLC ? mgsl_get_rx_frame : mgsl_get_raw_rx_frame);
+
+ if ( debug_level >= DEBUG_LEVEL_BH )
+ printk( "%s(%d):mgsl_bh_receive(%s)\n",
+ __FILE__,__LINE__,info->device_name);
+
+ do
+ {
+ if (info->rx_rcc_underrun) {
+ unsigned long flags;
+ spin_lock_irqsave(&info->irq_spinlock,flags);
+ usc_start_receiver(info);
+ spin_unlock_irqrestore(&info->irq_spinlock,flags);
+ return;
+ }
+ } while(get_rx_frame(info));
+}
+
+static void mgsl_bh_transmit(struct mgsl_struct *info)
+{
+ struct tty_struct *tty = info->port.tty;
+ unsigned long flags;
+
+ if ( debug_level >= DEBUG_LEVEL_BH )
+ printk( "%s(%d):mgsl_bh_transmit() entry on %s\n",
+ __FILE__,__LINE__,info->device_name);
+
+ if (tty)
+ tty_wakeup(tty);
+
+ /* if transmitter idle and loopmode_send_done_requested
+ * then start echoing RxD to TxD
+ */
+ spin_lock_irqsave(&info->irq_spinlock,flags);
+ if ( !info->tx_active && info->loopmode_send_done_requested )
+ usc_loopmode_send_done( info );
+ spin_unlock_irqrestore(&info->irq_spinlock,flags);
+}
+
+static void mgsl_bh_status(struct mgsl_struct *info)
+{
+ if ( debug_level >= DEBUG_LEVEL_BH )
+ printk( "%s(%d):mgsl_bh_status() entry on %s\n",
+ __FILE__,__LINE__,info->device_name);
+
+ info->ri_chkcount = 0;
+ info->dsr_chkcount = 0;
+ info->dcd_chkcount = 0;
+ info->cts_chkcount = 0;
+}
+
+/* mgsl_isr_receive_status()
+ *
+ * Service a receive status interrupt. The type of status
+ * interrupt is indicated by the state of the RCSR.
+ * This is only used for HDLC mode.
+ *
+ * Arguments: info pointer to device instance data
+ * Return Value: None
+ */
+static void mgsl_isr_receive_status( struct mgsl_struct *info )
+{
+ u16 status = usc_InReg( info, RCSR );
+
+ if ( debug_level >= DEBUG_LEVEL_ISR )
+ printk("%s(%d):mgsl_isr_receive_status status=%04X\n",
+ __FILE__,__LINE__,status);
+
+ if ( (status & RXSTATUS_ABORT_RECEIVED) &&
+ info->loopmode_insert_requested &&
+ usc_loopmode_active(info) )
+ {
+ ++info->icount.rxabort;
+ info->loopmode_insert_requested = false;
+
+ /* clear CMR:13 to start echoing RxD to TxD */
+ info->cmr_value &= ~BIT13;
+ usc_OutReg(info, CMR, info->cmr_value);
+
+ /* disable received abort irq (no longer required) */
+ usc_OutReg(info, RICR,
+ (usc_InReg(info, RICR) & ~RXSTATUS_ABORT_RECEIVED));
+ }
+
+ if (status & (RXSTATUS_EXITED_HUNT + RXSTATUS_IDLE_RECEIVED)) {
+ if (status & RXSTATUS_EXITED_HUNT)
+ info->icount.exithunt++;
+ if (status & RXSTATUS_IDLE_RECEIVED)
+ info->icount.rxidle++;
+ wake_up_interruptible(&info->event_wait_q);
+ }
+
+ if (status & RXSTATUS_OVERRUN){
+ info->icount.rxover++;
+ usc_process_rxoverrun_sync( info );
+ }
+
+ usc_ClearIrqPendingBits( info, RECEIVE_STATUS );
+ usc_UnlatchRxstatusBits( info, status );
+
+} /* end of mgsl_isr_receive_status() */
+
+/* mgsl_isr_transmit_status()
+ *
+ * Service a transmit status interrupt
+ * HDLC mode :end of transmit frame
+ * Async mode:all data is sent
+ * transmit status is indicated by bits in the TCSR.
+ *
+ * Arguments: info pointer to device instance data
+ * Return Value: None
+ */
+static void mgsl_isr_transmit_status( struct mgsl_struct *info )
+{
+ u16 status = usc_InReg( info, TCSR );
+
+ if ( debug_level >= DEBUG_LEVEL_ISR )
+ printk("%s(%d):mgsl_isr_transmit_status status=%04X\n",
+ __FILE__,__LINE__,status);
+
+ usc_ClearIrqPendingBits( info, TRANSMIT_STATUS );
+ usc_UnlatchTxstatusBits( info, status );
+
+ if ( status & (TXSTATUS_UNDERRUN | TXSTATUS_ABORT_SENT) )
+ {
+ /* finished sending HDLC abort. This may leave */
+ /* the TxFifo with data from the aborted frame */
+ /* so purge the TxFifo. Also shutdown the DMA */
+ /* channel in case there is data remaining in */
+ /* the DMA buffer */
+ usc_DmaCmd( info, DmaCmd_ResetTxChannel );
+ usc_RTCmd( info, RTCmd_PurgeTxFifo );
+ }
+
+ if ( status & TXSTATUS_EOF_SENT )
+ info->icount.txok++;
+ else if ( status & TXSTATUS_UNDERRUN )
+ info->icount.txunder++;
+ else if ( status & TXSTATUS_ABORT_SENT )
+ info->icount.txabort++;
+ else
+ info->icount.txunder++;
+
+ info->tx_active = false;
+ info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
+ del_timer(&info->tx_timer);
+
+ if ( info->drop_rts_on_tx_done ) {
+ usc_get_serial_signals( info );
+ if ( info->serial_signals & SerialSignal_RTS ) {
+ info->serial_signals &= ~SerialSignal_RTS;
+ usc_set_serial_signals( info );
+ }
+ info->drop_rts_on_tx_done = false;
+ }
+
+#if SYNCLINK_GENERIC_HDLC
+ if (info->netcount)
+ hdlcdev_tx_done(info);
+ else
+#endif
+ {
+ if (info->port.tty->stopped || info->port.tty->hw_stopped) {
+ usc_stop_transmitter(info);
+ return;
+ }
+ info->pending_bh |= BH_TRANSMIT;
+ }
+
+} /* end of mgsl_isr_transmit_status() */
+
+/* mgsl_isr_io_pin()
+ *
+ * Service an Input/Output pin interrupt. The type of
+ * interrupt is indicated by bits in the MISR
+ *
+ * Arguments: info pointer to device instance data
+ * Return Value: None
+ */
+static void mgsl_isr_io_pin( struct mgsl_struct *info )
+{
+ struct mgsl_icount *icount;
+ u16 status = usc_InReg( info, MISR );
+
+ if ( debug_level >= DEBUG_LEVEL_ISR )
+ printk("%s(%d):mgsl_isr_io_pin status=%04X\n",
+ __FILE__,__LINE__,status);
+
+ usc_ClearIrqPendingBits( info, IO_PIN );
+ usc_UnlatchIostatusBits( info, status );
+
+ if (status & (MISCSTATUS_CTS_LATCHED | MISCSTATUS_DCD_LATCHED |
+ MISCSTATUS_DSR_LATCHED | MISCSTATUS_RI_LATCHED) ) {
+ icount = &info->icount;
+ /* update input line counters */
+ if (status & MISCSTATUS_RI_LATCHED) {
+ if ((info->ri_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
+ usc_DisablestatusIrqs(info,SICR_RI);
+ icount->rng++;
+ if ( status & MISCSTATUS_RI )
+ info->input_signal_events.ri_up++;
+ else
+ info->input_signal_events.ri_down++;
+ }
+ if (status & MISCSTATUS_DSR_LATCHED) {
+ if ((info->dsr_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
+ usc_DisablestatusIrqs(info,SICR_DSR);
+ icount->dsr++;
+ if ( status & MISCSTATUS_DSR )
+ info->input_signal_events.dsr_up++;
+ else
+ info->input_signal_events.dsr_down++;
+ }
+ if (status & MISCSTATUS_DCD_LATCHED) {
+ if ((info->dcd_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
+ usc_DisablestatusIrqs(info,SICR_DCD);
+ icount->dcd++;
+ if (status & MISCSTATUS_DCD) {
+ info->input_signal_events.dcd_up++;
+ } else
+ info->input_signal_events.dcd_down++;
+#if SYNCLINK_GENERIC_HDLC
+ if (info->netcount) {
+ if (status & MISCSTATUS_DCD)
+ netif_carrier_on(info->netdev);
+ else
+ netif_carrier_off(info->netdev);
+ }
+#endif
+ }
+ if (status & MISCSTATUS_CTS_LATCHED)
+ {
+ if ((info->cts_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
+ usc_DisablestatusIrqs(info,SICR_CTS);
+ icount->cts++;
+ if ( status & MISCSTATUS_CTS )
+ info->input_signal_events.cts_up++;
+ else
+ info->input_signal_events.cts_down++;
+ }
+ wake_up_interruptible(&info->status_event_wait_q);
+ wake_up_interruptible(&info->event_wait_q);
+
+ if ( (info->port.flags & ASYNC_CHECK_CD) &&
+ (status & MISCSTATUS_DCD_LATCHED) ) {
+ if ( debug_level >= DEBUG_LEVEL_ISR )
+ printk("%s CD now %s...", info->device_name,
+ (status & MISCSTATUS_DCD) ? "on" : "off");
+ if (status & MISCSTATUS_DCD)
+ wake_up_interruptible(&info->port.open_wait);
+ else {
+ if ( debug_level >= DEBUG_LEVEL_ISR )
+ printk("doing serial hangup...");
+ if (info->port.tty)
+ tty_hangup(info->port.tty);
+ }
+ }
+
+ if ( (info->port.flags & ASYNC_CTS_FLOW) &&
+ (status & MISCSTATUS_CTS_LATCHED) ) {
+ if (info->port.tty->hw_stopped) {
+ if (status & MISCSTATUS_CTS) {
+ if ( debug_level >= DEBUG_LEVEL_ISR )
+ printk("CTS tx start...");
+ if (info->port.tty)
+ info->port.tty->hw_stopped = 0;
+ usc_start_transmitter(info);
+ info->pending_bh |= BH_TRANSMIT;
+ return;
+ }
+ } else {
+ if (!(status & MISCSTATUS_CTS)) {
+ if ( debug_level >= DEBUG_LEVEL_ISR )
+ printk("CTS tx stop...");
+ if (info->port.tty)
+ info->port.tty->hw_stopped = 1;
+ usc_stop_transmitter(info);
+ }
+ }
+ }
+ }
+
+ info->pending_bh |= BH_STATUS;
+
+ /* for diagnostics set IRQ flag */
+ if ( status & MISCSTATUS_TXC_LATCHED ){
+ usc_OutReg( info, SICR,
+ (unsigned short)(usc_InReg(info,SICR) & ~(SICR_TXC_ACTIVE+SICR_TXC_INACTIVE)) );
+ usc_UnlatchIostatusBits( info, MISCSTATUS_TXC_LATCHED );
+ info->irq_occurred = true;
+ }
+
+} /* end of mgsl_isr_io_pin() */
+
+/* mgsl_isr_transmit_data()
+ *
+ * Service a transmit data interrupt (async mode only).
+ *
+ * Arguments: info pointer to device instance data
+ * Return Value: None
+ */
+static void mgsl_isr_transmit_data( struct mgsl_struct *info )
+{
+ if ( debug_level >= DEBUG_LEVEL_ISR )
+ printk("%s(%d):mgsl_isr_transmit_data xmit_cnt=%d\n",
+ __FILE__,__LINE__,info->xmit_cnt);
+
+ usc_ClearIrqPendingBits( info, TRANSMIT_DATA );
+
+ if (info->port.tty->stopped || info->port.tty->hw_stopped) {
+ usc_stop_transmitter(info);
+ return;
+ }
+
+ if ( info->xmit_cnt )
+ usc_load_txfifo( info );
+ else
+ info->tx_active = false;
+
+ if (info->xmit_cnt < WAKEUP_CHARS)
+ info->pending_bh |= BH_TRANSMIT;
+
+} /* end of mgsl_isr_transmit_data() */
+
+/* mgsl_isr_receive_data()
+ *
+ * Service a receive data interrupt. This occurs
+ * when operating in asynchronous interrupt transfer mode.
+ * The receive data FIFO is flushed to the receive data buffers.
+ *
+ * Arguments: info pointer to device instance data
+ * Return Value: None
+ */
+static void mgsl_isr_receive_data( struct mgsl_struct *info )
+{
+ int Fifocount;
+ u16 status;
+ int work = 0;
+ unsigned char DataByte;
+ struct tty_struct *tty = info->port.tty;
+ struct mgsl_icount *icount = &info->icount;
+
+ if ( debug_level >= DEBUG_LEVEL_ISR )
+ printk("%s(%d):mgsl_isr_receive_data\n",
+ __FILE__,__LINE__);
+
+ usc_ClearIrqPendingBits( info, RECEIVE_DATA );
+
+ /* select FIFO status for RICR readback */
+ usc_RCmd( info, RCmd_SelectRicrRxFifostatus );
+
+ /* clear the Wordstatus bit so that status readback */
+ /* only reflects the status of this byte */
+ usc_OutReg( info, RICR+LSBONLY, (u16)(usc_InReg(info, RICR+LSBONLY) & ~BIT3 ));
+
+ /* flush the receive FIFO */
+
+ while( (Fifocount = (usc_InReg(info,RICR) >> 8)) ) {
+ int flag;
+
+ /* read one byte from RxFIFO */
+ outw( (inw(info->io_base + CCAR) & 0x0780) | (RDR+LSBONLY),
+ info->io_base + CCAR );
+ DataByte = inb( info->io_base + CCAR );
+
+ /* get the status of the received byte */
+ status = usc_InReg(info, RCSR);
+ if ( status & (RXSTATUS_FRAMING_ERROR + RXSTATUS_PARITY_ERROR +
+ RXSTATUS_OVERRUN + RXSTATUS_BREAK_RECEIVED) )
+ usc_UnlatchRxstatusBits(info,RXSTATUS_ALL);
+
+ icount->rx++;
+
+ flag = 0;
+ if ( status & (RXSTATUS_FRAMING_ERROR + RXSTATUS_PARITY_ERROR +
+ RXSTATUS_OVERRUN + RXSTATUS_BREAK_RECEIVED) ) {
+ printk("rxerr=%04X\n",status);
+ /* update error statistics */
+ if ( status & RXSTATUS_BREAK_RECEIVED ) {
+ status &= ~(RXSTATUS_FRAMING_ERROR + RXSTATUS_PARITY_ERROR);
+ icount->brk++;
+ } else if (status & RXSTATUS_PARITY_ERROR)
+ icount->parity++;
+ else if (status & RXSTATUS_FRAMING_ERROR)
+ icount->frame++;
+ else if (status & RXSTATUS_OVERRUN) {
+ /* must issue purge fifo cmd before */
+ /* 16C32 accepts more receive chars */
+ usc_RTCmd(info,RTCmd_PurgeRxFifo);
+ icount->overrun++;
+ }
+
+ /* discard char if tty control flags say so */
+ if (status & info->ignore_status_mask)
+ continue;
+
+ status &= info->read_status_mask;
+
+ if (status & RXSTATUS_BREAK_RECEIVED) {
+ flag = TTY_BREAK;
+ if (info->port.flags & ASYNC_SAK)
+ do_SAK(tty);
+ } else if (status & RXSTATUS_PARITY_ERROR)
+ flag = TTY_PARITY;
+ else if (status & RXSTATUS_FRAMING_ERROR)
+ flag = TTY_FRAME;
+ } /* end of if (error) */
+ tty_insert_flip_char(tty, DataByte, flag);
+ if (status & RXSTATUS_OVERRUN) {
+ /* Overrun is special, since it's
+ * reported immediately, and doesn't
+ * affect the current character
+ */
+ work += tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+ }
+ }
+
+ if ( debug_level >= DEBUG_LEVEL_ISR ) {
+ printk("%s(%d):rx=%d brk=%d parity=%d frame=%d overrun=%d\n",
+ __FILE__,__LINE__,icount->rx,icount->brk,
+ icount->parity,icount->frame,icount->overrun);
+ }
+
+ if(work)
+ tty_flip_buffer_push(tty);
+}
+
+/* mgsl_isr_misc()
+ *
+ * Service a miscellaneous interrupt source.
+ *
+ * Arguments: info pointer to device extension (instance data)
+ * Return Value: None
+ */
+static void mgsl_isr_misc( struct mgsl_struct *info )
+{
+ u16 status = usc_InReg( info, MISR );
+
+ if ( debug_level >= DEBUG_LEVEL_ISR )
+ printk("%s(%d):mgsl_isr_misc status=%04X\n",
+ __FILE__,__LINE__,status);
+
+ if ((status & MISCSTATUS_RCC_UNDERRUN) &&
+ (info->params.mode == MGSL_MODE_HDLC)) {
+
+ /* turn off receiver and rx DMA */
+ usc_EnableReceiver(info,DISABLE_UNCONDITIONAL);
+ usc_DmaCmd(info, DmaCmd_ResetRxChannel);
+ usc_UnlatchRxstatusBits(info, RXSTATUS_ALL);
+ usc_ClearIrqPendingBits(info, RECEIVE_DATA + RECEIVE_STATUS);
+ usc_DisableInterrupts(info, RECEIVE_DATA + RECEIVE_STATUS);
+
+ /* schedule BH handler to restart receiver */
+ info->pending_bh |= BH_RECEIVE;
+ info->rx_rcc_underrun = true;
+ }
+
+ usc_ClearIrqPendingBits( info, MISC );
+ usc_UnlatchMiscstatusBits( info, status );
+
+} /* end of mgsl_isr_misc() */
+
+/* mgsl_isr_null()
+ *
+ * Services undefined interrupt vectors from the
+ * USC. (hence this function SHOULD never be called)
+ *
+ * Arguments: info pointer to device extension (instance data)
+ * Return Value: None
+ */
+static void mgsl_isr_null( struct mgsl_struct *info )
+{
+
+} /* end of mgsl_isr_null() */
+
+/* mgsl_isr_receive_dma()
+ *
+ * Service a receive DMA channel interrupt.
+ * For this driver there are two sources of receive DMA interrupts
+ * as identified in the Receive DMA mode Register (RDMR):
+ *
+ * BIT3 EOA/EOL End of List, all receive buffers in receive
+ * buffer list have been filled (no more free buffers
+ * available). The DMA controller has shut down.
+ *
+ * BIT2 EOB End of Buffer. This interrupt occurs when a receive
+ * DMA buffer is terminated in response to completion
+ * of a good frame or a frame with errors. The status
+ * of the frame is stored in the buffer entry in the
+ * list of receive buffer entries.
+ *
+ * Arguments: info pointer to device instance data
+ * Return Value: None
+ */
+static void mgsl_isr_receive_dma( struct mgsl_struct *info )
+{
+ u16 status;
+
+ /* clear interrupt pending and IUS bit for Rx DMA IRQ */
+ usc_OutDmaReg( info, CDIR, BIT9+BIT1 );
+
+ /* Read the receive DMA status to identify interrupt type. */
+ /* This also clears the status bits. */
+ status = usc_InDmaReg( info, RDMR );
+
+ if ( debug_level >= DEBUG_LEVEL_ISR )
+ printk("%s(%d):mgsl_isr_receive_dma(%s) status=%04X\n",
+ __FILE__,__LINE__,info->device_name,status);
+
+ info->pending_bh |= BH_RECEIVE;
+
+ if ( status & BIT3 ) {
+ info->rx_overflow = true;
+ info->icount.buf_overrun++;
+ }
+
+} /* end of mgsl_isr_receive_dma() */
+
+/* mgsl_isr_transmit_dma()
+ *
+ * This function services a transmit DMA channel interrupt.
+ *
+ * For this driver there is one source of transmit DMA interrupts
+ * as identified in the Transmit DMA Mode Register (TDMR):
+ *
+ * BIT2 EOB End of Buffer. This interrupt occurs when a
+ * transmit DMA buffer has been emptied.
+ *
+ * The driver maintains enough transmit DMA buffers to hold at least
+ * one max frame size transmit frame. When operating in a buffered
+ * transmit mode, there may be enough transmit DMA buffers to hold at
+ * least two or more max frame size frames. On an EOB condition,
+ * determine if there are any queued transmit buffers and copy into
+ * transmit DMA buffers if we have room.
+ *
+ * Arguments: info pointer to device instance data
+ * Return Value: None
+ */
+static void mgsl_isr_transmit_dma( struct mgsl_struct *info )
+{
+ u16 status;
+
+ /* clear interrupt pending and IUS bit for Tx DMA IRQ */
+ usc_OutDmaReg(info, CDIR, BIT8+BIT0 );
+
+ /* Read the transmit DMA status to identify interrupt type. */
+ /* This also clears the status bits. */
+
+ status = usc_InDmaReg( info, TDMR );
+
+ if ( debug_level >= DEBUG_LEVEL_ISR )
+ printk("%s(%d):mgsl_isr_transmit_dma(%s) status=%04X\n",
+ __FILE__,__LINE__,info->device_name,status);
+
+ if ( status & BIT2 ) {
+ --info->tx_dma_buffers_used;
+
+ /* if there are transmit frames queued,
+ * try to load the next one
+ */
+ if ( load_next_tx_holding_buffer(info) ) {
+ /* if call returns non-zero value, we have
+ * at least one free tx holding buffer
+ */
+ info->pending_bh |= BH_TRANSMIT;
+ }
+ }
+
+} /* end of mgsl_isr_transmit_dma() */
+
+/* mgsl_interrupt()
+ *
+ * Interrupt service routine entry point.
+ *
+ * Arguments:
+ *
+ * irq interrupt number that caused interrupt
+ * dev_id device ID supplied during interrupt registration
+ *
+ * Return Value: None
+ */
+static irqreturn_t mgsl_interrupt(int dummy, void *dev_id)
+{
+ struct mgsl_struct *info = dev_id;
+ u16 UscVector;
+ u16 DmaVector;
+
+ if ( debug_level >= DEBUG_LEVEL_ISR )
+ printk(KERN_DEBUG "%s(%d):mgsl_interrupt(%d)entry.\n",
+ __FILE__, __LINE__, info->irq_level);
+
+ spin_lock(&info->irq_spinlock);
+
+ for(;;) {
+ /* Read the interrupt vectors from hardware. */
+ UscVector = usc_InReg(info, IVR) >> 9;
+ DmaVector = usc_InDmaReg(info, DIVR);
+
+ if ( debug_level >= DEBUG_LEVEL_ISR )
+ printk("%s(%d):%s UscVector=%08X DmaVector=%08X\n",
+ __FILE__,__LINE__,info->device_name,UscVector,DmaVector);
+
+ if ( !UscVector && !DmaVector )
+ break;
+
+ /* Dispatch interrupt vector */
+ if ( UscVector )
+ (*UscIsrTable[UscVector])(info);
+ else if ( (DmaVector&(BIT10|BIT9)) == BIT10)
+ mgsl_isr_transmit_dma(info);
+ else
+ mgsl_isr_receive_dma(info);
+
+ if ( info->isr_overflow ) {
+ printk(KERN_ERR "%s(%d):%s isr overflow irq=%d\n",
+ __FILE__, __LINE__, info->device_name, info->irq_level);
+ usc_DisableMasterIrqBit(info);
+ usc_DisableDmaInterrupts(info,DICR_MASTER);
+ break;
+ }
+ }
+
+ /* Request bottom half processing if there's something
+ * for it to do and the bh is not already running
+ */
+
+ if ( info->pending_bh && !info->bh_running && !info->bh_requested ) {
+ if ( debug_level >= DEBUG_LEVEL_ISR )
+ printk("%s(%d):%s queueing bh task.\n",
+ __FILE__,__LINE__,info->device_name);
+ schedule_work(&info->task);
+ info->bh_requested = true;
+ }
+
+ spin_unlock(&info->irq_spinlock);
+
+ if ( debug_level >= DEBUG_LEVEL_ISR )
+ printk(KERN_DEBUG "%s(%d):mgsl_interrupt(%d)exit.\n",
+ __FILE__, __LINE__, info->irq_level);
+
+ return IRQ_HANDLED;
+} /* end of mgsl_interrupt() */
+
+/* startup()
+ *
+ * Initialize and start device.
+ *
+ * Arguments: info pointer to device instance data
+ * Return Value: 0 if success, otherwise error code
+ */
+static int startup(struct mgsl_struct * info)
+{
+ int retval = 0;
+
+ if ( debug_level >= DEBUG_LEVEL_INFO )
+ printk("%s(%d):mgsl_startup(%s)\n",__FILE__,__LINE__,info->device_name);
+
+ if (info->port.flags & ASYNC_INITIALIZED)
+ return 0;
+
+ if (!info->xmit_buf) {
+ /* allocate a page of memory for a transmit buffer */
+ info->xmit_buf = (unsigned char *)get_zeroed_page(GFP_KERNEL);
+ if (!info->xmit_buf) {
+ printk(KERN_ERR"%s(%d):%s can't allocate transmit buffer\n",
+ __FILE__,__LINE__,info->device_name);
+ return -ENOMEM;
+ }
+ }
+
+ info->pending_bh = 0;
+
+ memset(&info->icount, 0, sizeof(info->icount));
+
+ setup_timer(&info->tx_timer, mgsl_tx_timeout, (unsigned long)info);
+
+ /* Allocate and claim adapter resources */
+ retval = mgsl_claim_resources(info);
+
+ /* perform existence check and diagnostics */
+ if ( !retval )
+ retval = mgsl_adapter_test(info);
+
+ if ( retval ) {
+ if (capable(CAP_SYS_ADMIN) && info->port.tty)
+ set_bit(TTY_IO_ERROR, &info->port.tty->flags);
+ mgsl_release_resources(info);
+ return retval;
+ }
+
+ /* program hardware for current parameters */
+ mgsl_change_params(info);
+
+ if (info->port.tty)
+ clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
+
+ info->port.flags |= ASYNC_INITIALIZED;
+
+ return 0;
+
+} /* end of startup() */
+
+/* shutdown()
+ *
+ * Called by mgsl_close() and mgsl_hangup() to shutdown hardware
+ *
+ * Arguments: info pointer to device instance data
+ * Return Value: None
+ */
+static void shutdown(struct mgsl_struct * info)
+{
+ unsigned long flags;
+
+ if (!(info->port.flags & ASYNC_INITIALIZED))
+ return;
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):mgsl_shutdown(%s)\n",
+ __FILE__,__LINE__, info->device_name );
+
+ /* clear status wait queue because status changes */
+ /* can't happen after shutting down the hardware */
+ wake_up_interruptible(&info->status_event_wait_q);
+ wake_up_interruptible(&info->event_wait_q);
+
+ del_timer_sync(&info->tx_timer);
+
+ if (info->xmit_buf) {
+ free_page((unsigned long) info->xmit_buf);
+ info->xmit_buf = NULL;
+ }
+
+ spin_lock_irqsave(&info->irq_spinlock,flags);
+ usc_DisableMasterIrqBit(info);
+ usc_stop_receiver(info);
+ usc_stop_transmitter(info);
+ usc_DisableInterrupts(info,RECEIVE_DATA + RECEIVE_STATUS +
+ TRANSMIT_DATA + TRANSMIT_STATUS + IO_PIN + MISC );
+ usc_DisableDmaInterrupts(info,DICR_MASTER + DICR_TRANSMIT + DICR_RECEIVE);
+
+ /* Disable DMAEN (Port 7, Bit 14) */
+ /* This disconnects the DMA request signal from the ISA bus */
+ /* on the ISA adapter. This has no effect for the PCI adapter */
+ usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT15) | BIT14));
+
+ /* Disable INTEN (Port 6, Bit12) */
+ /* This disconnects the IRQ request signal to the ISA bus */
+ /* on the ISA adapter. This has no effect for the PCI adapter */
+ usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT13) | BIT12));
+
+ if (!info->port.tty || info->port.tty->termios->c_cflag & HUPCL) {
+ info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
+ usc_set_serial_signals(info);
+ }
+
+ spin_unlock_irqrestore(&info->irq_spinlock,flags);
+
+ mgsl_release_resources(info);
+
+ if (info->port.tty)
+ set_bit(TTY_IO_ERROR, &info->port.tty->flags);
+
+ info->port.flags &= ~ASYNC_INITIALIZED;
+
+} /* end of shutdown() */
+
+static void mgsl_program_hw(struct mgsl_struct *info)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&info->irq_spinlock,flags);
+
+ usc_stop_receiver(info);
+ usc_stop_transmitter(info);
+ info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
+
+ if (info->params.mode == MGSL_MODE_HDLC ||
+ info->params.mode == MGSL_MODE_RAW ||
+ info->netcount)
+ usc_set_sync_mode(info);
+ else
+ usc_set_async_mode(info);
+
+ usc_set_serial_signals(info);
+
+ info->dcd_chkcount = 0;
+ info->cts_chkcount = 0;
+ info->ri_chkcount = 0;
+ info->dsr_chkcount = 0;
+
+ usc_EnableStatusIrqs(info,SICR_CTS+SICR_DSR+SICR_DCD+SICR_RI);
+ usc_EnableInterrupts(info, IO_PIN);
+ usc_get_serial_signals(info);
+
+ if (info->netcount || info->port.tty->termios->c_cflag & CREAD)
+ usc_start_receiver(info);
+
+ spin_unlock_irqrestore(&info->irq_spinlock,flags);
+}
+
+/* Reconfigure adapter based on new parameters
+ */
+static void mgsl_change_params(struct mgsl_struct *info)
+{
+ unsigned cflag;
+ int bits_per_char;
+
+ if (!info->port.tty || !info->port.tty->termios)
+ return;
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):mgsl_change_params(%s)\n",
+ __FILE__,__LINE__, info->device_name );
+
+ cflag = info->port.tty->termios->c_cflag;
+
+ /* if B0 rate (hangup) specified then negate DTR and RTS */
+ /* otherwise assert DTR and RTS */
+ if (cflag & CBAUD)
+ info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
+ else
+ info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
+
+ /* byte size and parity */
+
+ switch (cflag & CSIZE) {
+ case CS5: info->params.data_bits = 5; break;
+ case CS6: info->params.data_bits = 6; break;
+ case CS7: info->params.data_bits = 7; break;
+ case CS8: info->params.data_bits = 8; break;
+ /* Never happens, but GCC is too dumb to figure it out */
+ default: info->params.data_bits = 7; break;
+ }
+
+ if (cflag & CSTOPB)
+ info->params.stop_bits = 2;
+ else
+ info->params.stop_bits = 1;
+
+ info->params.parity = ASYNC_PARITY_NONE;
+ if (cflag & PARENB) {
+ if (cflag & PARODD)
+ info->params.parity = ASYNC_PARITY_ODD;
+ else
+ info->params.parity = ASYNC_PARITY_EVEN;
+#ifdef CMSPAR
+ if (cflag & CMSPAR)
+ info->params.parity = ASYNC_PARITY_SPACE;
+#endif
+ }
+
+ /* calculate number of jiffies to transmit a full
+ * FIFO (32 bytes) at specified data rate
+ */
+ bits_per_char = info->params.data_bits +
+ info->params.stop_bits + 1;
+
+ /* if port data rate is set to 460800 or less then
+ * allow tty settings to override, otherwise keep the
+ * current data rate.
+ */
+ if (info->params.data_rate <= 460800)
+ info->params.data_rate = tty_get_baud_rate(info->port.tty);
+
+ if ( info->params.data_rate ) {
+ info->timeout = (32*HZ*bits_per_char) /
+ info->params.data_rate;
+ }
+ info->timeout += HZ/50; /* Add .02 seconds of slop */
+
+ if (cflag & CRTSCTS)
+ info->port.flags |= ASYNC_CTS_FLOW;
+ else
+ info->port.flags &= ~ASYNC_CTS_FLOW;
+
+ if (cflag & CLOCAL)
+ info->port.flags &= ~ASYNC_CHECK_CD;
+ else
+ info->port.flags |= ASYNC_CHECK_CD;
+
+ /* process tty input control flags */
+
+ info->read_status_mask = RXSTATUS_OVERRUN;
+ if (I_INPCK(info->port.tty))
+ info->read_status_mask |= RXSTATUS_PARITY_ERROR | RXSTATUS_FRAMING_ERROR;
+ if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
+ info->read_status_mask |= RXSTATUS_BREAK_RECEIVED;
+
+ if (I_IGNPAR(info->port.tty))
+ info->ignore_status_mask |= RXSTATUS_PARITY_ERROR | RXSTATUS_FRAMING_ERROR;
+ if (I_IGNBRK(info->port.tty)) {
+ info->ignore_status_mask |= RXSTATUS_BREAK_RECEIVED;
+ /* If ignoring parity and break indicators, ignore
+ * overruns too. (For real raw support).
+ */
+ if (I_IGNPAR(info->port.tty))
+ info->ignore_status_mask |= RXSTATUS_OVERRUN;
+ }
+
+ mgsl_program_hw(info);
+
+} /* end of mgsl_change_params() */
+
+/* mgsl_put_char()
+ *
+ * Add a character to the transmit buffer.
+ *
+ * Arguments: tty pointer to tty information structure
+ * ch character to add to transmit buffer
+ *
+ * Return Value: None
+ */
+static int mgsl_put_char(struct tty_struct *tty, unsigned char ch)
+{
+ struct mgsl_struct *info = tty->driver_data;
+ unsigned long flags;
+ int ret = 0;
+
+ if (debug_level >= DEBUG_LEVEL_INFO) {
+ printk(KERN_DEBUG "%s(%d):mgsl_put_char(%d) on %s\n",
+ __FILE__, __LINE__, ch, info->device_name);
+ }
+
+ if (mgsl_paranoia_check(info, tty->name, "mgsl_put_char"))
+ return 0;
+
+ if (!info->xmit_buf)
+ return 0;
+
+ spin_lock_irqsave(&info->irq_spinlock, flags);
+
+ if ((info->params.mode == MGSL_MODE_ASYNC ) || !info->tx_active) {
+ if (info->xmit_cnt < SERIAL_XMIT_SIZE - 1) {
+ info->xmit_buf[info->xmit_head++] = ch;
+ info->xmit_head &= SERIAL_XMIT_SIZE-1;
+ info->xmit_cnt++;
+ ret = 1;
+ }
+ }
+ spin_unlock_irqrestore(&info->irq_spinlock, flags);
+ return ret;
+
+} /* end of mgsl_put_char() */
+
+/* mgsl_flush_chars()
+ *
+ * Enable transmitter so remaining characters in the
+ * transmit buffer are sent.
+ *
+ * Arguments: tty pointer to tty information structure
+ * Return Value: None
+ */
+static void mgsl_flush_chars(struct tty_struct *tty)
+{
+ struct mgsl_struct *info = tty->driver_data;
+ unsigned long flags;
+
+ if ( debug_level >= DEBUG_LEVEL_INFO )
+ printk( "%s(%d):mgsl_flush_chars() entry on %s xmit_cnt=%d\n",
+ __FILE__,__LINE__,info->device_name,info->xmit_cnt);
+
+ if (mgsl_paranoia_check(info, tty->name, "mgsl_flush_chars"))
+ return;
+
+ if (info->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped ||
+ !info->xmit_buf)
+ return;
+
+ if ( debug_level >= DEBUG_LEVEL_INFO )
+ printk( "%s(%d):mgsl_flush_chars() entry on %s starting transmitter\n",
+ __FILE__,__LINE__,info->device_name );
+
+ spin_lock_irqsave(&info->irq_spinlock,flags);
+
+ if (!info->tx_active) {
+ if ( (info->params.mode == MGSL_MODE_HDLC ||
+ info->params.mode == MGSL_MODE_RAW) && info->xmit_cnt ) {
+ /* operating in synchronous (frame oriented) mode */
+ /* copy data from circular xmit_buf to */
+ /* transmit DMA buffer. */
+ mgsl_load_tx_dma_buffer(info,
+ info->xmit_buf,info->xmit_cnt);
+ }
+ usc_start_transmitter(info);
+ }
+
+ spin_unlock_irqrestore(&info->irq_spinlock,flags);
+
+} /* end of mgsl_flush_chars() */
+
+/* mgsl_write()
+ *
+ * Send a block of data
+ *
+ * Arguments:
+ *
+ * tty pointer to tty information structure
+ * buf pointer to buffer containing send data
+ * count size of send data in bytes
+ *
+ * Return Value: number of characters written
+ */
+static int mgsl_write(struct tty_struct * tty,
+ const unsigned char *buf, int count)
+{
+ int c, ret = 0;
+ struct mgsl_struct *info = tty->driver_data;
+ unsigned long flags;
+
+ if ( debug_level >= DEBUG_LEVEL_INFO )
+ printk( "%s(%d):mgsl_write(%s) count=%d\n",
+ __FILE__,__LINE__,info->device_name,count);
+
+ if (mgsl_paranoia_check(info, tty->name, "mgsl_write"))
+ goto cleanup;
+
+ if (!info->xmit_buf)
+ goto cleanup;
+
+ if ( info->params.mode == MGSL_MODE_HDLC ||
+ info->params.mode == MGSL_MODE_RAW ) {
+ /* operating in synchronous (frame oriented) mode */
+ /* operating in synchronous (frame oriented) mode */
+ if (info->tx_active) {
+
+ if ( info->params.mode == MGSL_MODE_HDLC ) {
+ ret = 0;
+ goto cleanup;
+ }
+ /* transmitter is actively sending data -
+ * if we have multiple transmit dma and
+ * holding buffers, attempt to queue this
+ * frame for transmission at a later time.
+ */
+ if (info->tx_holding_count >= info->num_tx_holding_buffers ) {
+ /* no tx holding buffers available */
+ ret = 0;
+ goto cleanup;
+ }
+
+ /* queue transmit frame request */
+ ret = count;
+ save_tx_buffer_request(info,buf,count);
+
+ /* if we have sufficient tx dma buffers,
+ * load the next buffered tx request
+ */
+ spin_lock_irqsave(&info->irq_spinlock,flags);
+ load_next_tx_holding_buffer(info);
+ spin_unlock_irqrestore(&info->irq_spinlock,flags);
+ goto cleanup;
+ }
+
+ /* if operating in HDLC LoopMode and the adapter */
+ /* has yet to be inserted into the loop, we can't */
+ /* transmit */
+
+ if ( (info->params.flags & HDLC_FLAG_HDLC_LOOPMODE) &&
+ !usc_loopmode_active(info) )
+ {
+ ret = 0;
+ goto cleanup;
+ }
+
+ if ( info->xmit_cnt ) {
+ /* Send accumulated from send_char() calls */
+ /* as frame and wait before accepting more data. */
+ ret = 0;
+
+ /* copy data from circular xmit_buf to */
+ /* transmit DMA buffer. */
+ mgsl_load_tx_dma_buffer(info,
+ info->xmit_buf,info->xmit_cnt);
+ if ( debug_level >= DEBUG_LEVEL_INFO )
+ printk( "%s(%d):mgsl_write(%s) sync xmit_cnt flushing\n",
+ __FILE__,__LINE__,info->device_name);
+ } else {
+ if ( debug_level >= DEBUG_LEVEL_INFO )
+ printk( "%s(%d):mgsl_write(%s) sync transmit accepted\n",
+ __FILE__,__LINE__,info->device_name);
+ ret = count;
+ info->xmit_cnt = count;
+ mgsl_load_tx_dma_buffer(info,buf,count);
+ }
+ } else {
+ while (1) {
+ spin_lock_irqsave(&info->irq_spinlock,flags);
+ c = min_t(int, count,
+ min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
+ SERIAL_XMIT_SIZE - info->xmit_head));
+ if (c <= 0) {
+ spin_unlock_irqrestore(&info->irq_spinlock,flags);
+ break;
+ }
+ memcpy(info->xmit_buf + info->xmit_head, buf, c);
+ info->xmit_head = ((info->xmit_head + c) &
+ (SERIAL_XMIT_SIZE-1));
+ info->xmit_cnt += c;
+ spin_unlock_irqrestore(&info->irq_spinlock,flags);
+ buf += c;
+ count -= c;
+ ret += c;
+ }
+ }
+
+ if (info->xmit_cnt && !tty->stopped && !tty->hw_stopped) {
+ spin_lock_irqsave(&info->irq_spinlock,flags);
+ if (!info->tx_active)
+ usc_start_transmitter(info);
+ spin_unlock_irqrestore(&info->irq_spinlock,flags);
+ }
+cleanup:
+ if ( debug_level >= DEBUG_LEVEL_INFO )
+ printk( "%s(%d):mgsl_write(%s) returning=%d\n",
+ __FILE__,__LINE__,info->device_name,ret);
+
+ return ret;
+
+} /* end of mgsl_write() */
+
+/* mgsl_write_room()
+ *
+ * Return the count of free bytes in transmit buffer
+ *
+ * Arguments: tty pointer to tty info structure
+ * Return Value: None
+ */
+static int mgsl_write_room(struct tty_struct *tty)
+{
+ struct mgsl_struct *info = tty->driver_data;
+ int ret;
+
+ if (mgsl_paranoia_check(info, tty->name, "mgsl_write_room"))
+ return 0;
+ ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1;
+ if (ret < 0)
+ ret = 0;
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):mgsl_write_room(%s)=%d\n",
+ __FILE__,__LINE__, info->device_name,ret );
+
+ if ( info->params.mode == MGSL_MODE_HDLC ||
+ info->params.mode == MGSL_MODE_RAW ) {
+ /* operating in synchronous (frame oriented) mode */
+ if ( info->tx_active )
+ return 0;
+ else
+ return HDLC_MAX_FRAME_SIZE;
+ }
+
+ return ret;
+
+} /* end of mgsl_write_room() */
+
+/* mgsl_chars_in_buffer()
+ *
+ * Return the count of bytes in transmit buffer
+ *
+ * Arguments: tty pointer to tty info structure
+ * Return Value: None
+ */
+static int mgsl_chars_in_buffer(struct tty_struct *tty)
+{
+ struct mgsl_struct *info = tty->driver_data;
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):mgsl_chars_in_buffer(%s)\n",
+ __FILE__,__LINE__, info->device_name );
+
+ if (mgsl_paranoia_check(info, tty->name, "mgsl_chars_in_buffer"))
+ return 0;
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):mgsl_chars_in_buffer(%s)=%d\n",
+ __FILE__,__LINE__, info->device_name,info->xmit_cnt );
+
+ if ( info->params.mode == MGSL_MODE_HDLC ||
+ info->params.mode == MGSL_MODE_RAW ) {
+ /* operating in synchronous (frame oriented) mode */
+ if ( info->tx_active )
+ return info->max_frame_size;
+ else
+ return 0;
+ }
+
+ return info->xmit_cnt;
+} /* end of mgsl_chars_in_buffer() */
+
+/* mgsl_flush_buffer()
+ *
+ * Discard all data in the send buffer
+ *
+ * Arguments: tty pointer to tty info structure
+ * Return Value: None
+ */
+static void mgsl_flush_buffer(struct tty_struct *tty)
+{
+ struct mgsl_struct *info = tty->driver_data;
+ unsigned long flags;
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):mgsl_flush_buffer(%s) entry\n",
+ __FILE__,__LINE__, info->device_name );
+
+ if (mgsl_paranoia_check(info, tty->name, "mgsl_flush_buffer"))
+ return;
+
+ spin_lock_irqsave(&info->irq_spinlock,flags);
+ info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
+ del_timer(&info->tx_timer);
+ spin_unlock_irqrestore(&info->irq_spinlock,flags);
+
+ tty_wakeup(tty);
+}
+
+/* mgsl_send_xchar()
+ *
+ * Send a high-priority XON/XOFF character
+ *
+ * Arguments: tty pointer to tty info structure
+ * ch character to send
+ * Return Value: None
+ */
+static void mgsl_send_xchar(struct tty_struct *tty, char ch)
+{
+ struct mgsl_struct *info = tty->driver_data;
+ unsigned long flags;
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):mgsl_send_xchar(%s,%d)\n",
+ __FILE__,__LINE__, info->device_name, ch );
+
+ if (mgsl_paranoia_check(info, tty->name, "mgsl_send_xchar"))
+ return;
+
+ info->x_char = ch;
+ if (ch) {
+ /* Make sure transmit interrupts are on */
+ spin_lock_irqsave(&info->irq_spinlock,flags);
+ if (!info->tx_enabled)
+ usc_start_transmitter(info);
+ spin_unlock_irqrestore(&info->irq_spinlock,flags);
+ }
+} /* end of mgsl_send_xchar() */
+
+/* mgsl_throttle()
+ *
+ * Signal remote device to throttle send data (our receive data)
+ *
+ * Arguments: tty pointer to tty info structure
+ * Return Value: None
+ */
+static void mgsl_throttle(struct tty_struct * tty)
+{
+ struct mgsl_struct *info = tty->driver_data;
+ unsigned long flags;
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):mgsl_throttle(%s) entry\n",
+ __FILE__,__LINE__, info->device_name );
+
+ if (mgsl_paranoia_check(info, tty->name, "mgsl_throttle"))
+ return;
+
+ if (I_IXOFF(tty))
+ mgsl_send_xchar(tty, STOP_CHAR(tty));
+
+ if (tty->termios->c_cflag & CRTSCTS) {
+ spin_lock_irqsave(&info->irq_spinlock,flags);
+ info->serial_signals &= ~SerialSignal_RTS;
+ usc_set_serial_signals(info);
+ spin_unlock_irqrestore(&info->irq_spinlock,flags);
+ }
+} /* end of mgsl_throttle() */
+
+/* mgsl_unthrottle()
+ *
+ * Signal remote device to stop throttling send data (our receive data)
+ *
+ * Arguments: tty pointer to tty info structure
+ * Return Value: None
+ */
+static void mgsl_unthrottle(struct tty_struct * tty)
+{
+ struct mgsl_struct *info = tty->driver_data;
+ unsigned long flags;
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):mgsl_unthrottle(%s) entry\n",
+ __FILE__,__LINE__, info->device_name );
+
+ if (mgsl_paranoia_check(info, tty->name, "mgsl_unthrottle"))
+ return;
+
+ if (I_IXOFF(tty)) {
+ if (info->x_char)
+ info->x_char = 0;
+ else
+ mgsl_send_xchar(tty, START_CHAR(tty));
+ }
+
+ if (tty->termios->c_cflag & CRTSCTS) {
+ spin_lock_irqsave(&info->irq_spinlock,flags);
+ info->serial_signals |= SerialSignal_RTS;
+ usc_set_serial_signals(info);
+ spin_unlock_irqrestore(&info->irq_spinlock,flags);
+ }
+
+} /* end of mgsl_unthrottle() */
+
+/* mgsl_get_stats()
+ *
+ * get the current serial parameters information
+ *
+ * Arguments: info pointer to device instance data
+ * user_icount pointer to buffer to hold returned stats
+ *
+ * Return Value: 0 if success, otherwise error code
+ */
+static int mgsl_get_stats(struct mgsl_struct * info, struct mgsl_icount __user *user_icount)
+{
+ int err;
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):mgsl_get_params(%s)\n",
+ __FILE__,__LINE__, info->device_name);
+
+ if (!user_icount) {
+ memset(&info->icount, 0, sizeof(info->icount));
+ } else {
+ mutex_lock(&info->port.mutex);
+ COPY_TO_USER(err, user_icount, &info->icount, sizeof(struct mgsl_icount));
+ mutex_unlock(&info->port.mutex);
+ if (err)
+ return -EFAULT;
+ }
+
+ return 0;
+
+} /* end of mgsl_get_stats() */
+
+/* mgsl_get_params()
+ *
+ * get the current serial parameters information
+ *
+ * Arguments: info pointer to device instance data
+ * user_params pointer to buffer to hold returned params
+ *
+ * Return Value: 0 if success, otherwise error code
+ */
+static int mgsl_get_params(struct mgsl_struct * info, MGSL_PARAMS __user *user_params)
+{
+ int err;
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):mgsl_get_params(%s)\n",
+ __FILE__,__LINE__, info->device_name);
+
+ mutex_lock(&info->port.mutex);
+ COPY_TO_USER(err,user_params, &info->params, sizeof(MGSL_PARAMS));
+ mutex_unlock(&info->port.mutex);
+ if (err) {
+ if ( debug_level >= DEBUG_LEVEL_INFO )
+ printk( "%s(%d):mgsl_get_params(%s) user buffer copy failed\n",
+ __FILE__,__LINE__,info->device_name);
+ return -EFAULT;
+ }
+
+ return 0;
+
+} /* end of mgsl_get_params() */
+
+/* mgsl_set_params()
+ *
+ * set the serial parameters
+ *
+ * Arguments:
+ *
+ * info pointer to device instance data
+ * new_params user buffer containing new serial params
+ *
+ * Return Value: 0 if success, otherwise error code
+ */
+static int mgsl_set_params(struct mgsl_struct * info, MGSL_PARAMS __user *new_params)
+{
+ unsigned long flags;
+ MGSL_PARAMS tmp_params;
+ int err;
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):mgsl_set_params %s\n", __FILE__,__LINE__,
+ info->device_name );
+ COPY_FROM_USER(err,&tmp_params, new_params, sizeof(MGSL_PARAMS));
+ if (err) {
+ if ( debug_level >= DEBUG_LEVEL_INFO )
+ printk( "%s(%d):mgsl_set_params(%s) user buffer copy failed\n",
+ __FILE__,__LINE__,info->device_name);
+ return -EFAULT;
+ }
+
+ mutex_lock(&info->port.mutex);
+ spin_lock_irqsave(&info->irq_spinlock,flags);
+ memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS));
+ spin_unlock_irqrestore(&info->irq_spinlock,flags);
+
+ mgsl_change_params(info);
+ mutex_unlock(&info->port.mutex);
+
+ return 0;
+
+} /* end of mgsl_set_params() */
+
+/* mgsl_get_txidle()
+ *
+ * get the current transmit idle mode
+ *
+ * Arguments: info pointer to device instance data
+ * idle_mode pointer to buffer to hold returned idle mode
+ *
+ * Return Value: 0 if success, otherwise error code
+ */
+static int mgsl_get_txidle(struct mgsl_struct * info, int __user *idle_mode)
+{
+ int err;
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):mgsl_get_txidle(%s)=%d\n",
+ __FILE__,__LINE__, info->device_name, info->idle_mode);
+
+ COPY_TO_USER(err,idle_mode, &info->idle_mode, sizeof(int));
+ if (err) {
+ if ( debug_level >= DEBUG_LEVEL_INFO )
+ printk( "%s(%d):mgsl_get_txidle(%s) user buffer copy failed\n",
+ __FILE__,__LINE__,info->device_name);
+ return -EFAULT;
+ }
+
+ return 0;
+
+} /* end of mgsl_get_txidle() */
+
+/* mgsl_set_txidle() service ioctl to set transmit idle mode
+ *
+ * Arguments: info pointer to device instance data
+ * idle_mode new idle mode
+ *
+ * Return Value: 0 if success, otherwise error code
+ */
+static int mgsl_set_txidle(struct mgsl_struct * info, int idle_mode)
+{
+ unsigned long flags;
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):mgsl_set_txidle(%s,%d)\n", __FILE__,__LINE__,
+ info->device_name, idle_mode );
+
+ spin_lock_irqsave(&info->irq_spinlock,flags);
+ info->idle_mode = idle_mode;
+ usc_set_txidle( info );
+ spin_unlock_irqrestore(&info->irq_spinlock,flags);
+ return 0;
+
+} /* end of mgsl_set_txidle() */
+
+/* mgsl_txenable()
+ *
+ * enable or disable the transmitter
+ *
+ * Arguments:
+ *
+ * info pointer to device instance data
+ * enable 1 = enable, 0 = disable
+ *
+ * Return Value: 0 if success, otherwise error code
+ */
+static int mgsl_txenable(struct mgsl_struct * info, int enable)
+{
+ unsigned long flags;
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):mgsl_txenable(%s,%d)\n", __FILE__,__LINE__,
+ info->device_name, enable);
+
+ spin_lock_irqsave(&info->irq_spinlock,flags);
+ if ( enable ) {
+ if ( !info->tx_enabled ) {
+
+ usc_start_transmitter(info);
+ /*--------------------------------------------------
+ * if HDLC/SDLC Loop mode, attempt to insert the
+ * station in the 'loop' by setting CMR:13. Upon
+ * receipt of the next GoAhead (RxAbort) sequence,
+ * the OnLoop indicator (CCSR:7) should go active
+ * to indicate that we are on the loop
+ *--------------------------------------------------*/
+ if ( info->params.flags & HDLC_FLAG_HDLC_LOOPMODE )
+ usc_loopmode_insert_request( info );
+ }
+ } else {
+ if ( info->tx_enabled )
+ usc_stop_transmitter(info);
+ }
+ spin_unlock_irqrestore(&info->irq_spinlock,flags);
+ return 0;
+
+} /* end of mgsl_txenable() */
+
+/* mgsl_txabort() abort send HDLC frame
+ *
+ * Arguments: info pointer to device instance data
+ * Return Value: 0 if success, otherwise error code
+ */
+static int mgsl_txabort(struct mgsl_struct * info)
+{
+ unsigned long flags;
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):mgsl_txabort(%s)\n", __FILE__,__LINE__,
+ info->device_name);
+
+ spin_lock_irqsave(&info->irq_spinlock,flags);
+ if ( info->tx_active && info->params.mode == MGSL_MODE_HDLC )
+ {
+ if ( info->params.flags & HDLC_FLAG_HDLC_LOOPMODE )
+ usc_loopmode_cancel_transmit( info );
+ else
+ usc_TCmd(info,TCmd_SendAbort);
+ }
+ spin_unlock_irqrestore(&info->irq_spinlock,flags);
+ return 0;
+
+} /* end of mgsl_txabort() */
+
+/* mgsl_rxenable() enable or disable the receiver
+ *
+ * Arguments: info pointer to device instance data
+ * enable 1 = enable, 0 = disable
+ * Return Value: 0 if success, otherwise error code
+ */
+static int mgsl_rxenable(struct mgsl_struct * info, int enable)
+{
+ unsigned long flags;
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):mgsl_rxenable(%s,%d)\n", __FILE__,__LINE__,
+ info->device_name, enable);
+
+ spin_lock_irqsave(&info->irq_spinlock,flags);
+ if ( enable ) {
+ if ( !info->rx_enabled )
+ usc_start_receiver(info);
+ } else {
+ if ( info->rx_enabled )
+ usc_stop_receiver(info);
+ }
+ spin_unlock_irqrestore(&info->irq_spinlock,flags);
+ return 0;
+
+} /* end of mgsl_rxenable() */
+
+/* mgsl_wait_event() wait for specified event to occur
+ *
+ * Arguments: info pointer to device instance data
+ * mask pointer to bitmask of events to wait for
+ * Return Value: 0 if successful and bit mask updated with
+ * of events triggerred,
+ * otherwise error code
+ */
+static int mgsl_wait_event(struct mgsl_struct * info, int __user * mask_ptr)
+{
+ unsigned long flags;
+ int s;
+ int rc=0;
+ struct mgsl_icount cprev, cnow;
+ int events;
+ int mask;
+ struct _input_signal_events oldsigs, newsigs;
+ DECLARE_WAITQUEUE(wait, current);
+
+ COPY_FROM_USER(rc,&mask, mask_ptr, sizeof(int));
+ if (rc) {
+ return -EFAULT;
+ }
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):mgsl_wait_event(%s,%d)\n", __FILE__,__LINE__,
+ info->device_name, mask);
+
+ spin_lock_irqsave(&info->irq_spinlock,flags);
+
+ /* return immediately if state matches requested events */
+ usc_get_serial_signals(info);
+ s = info->serial_signals;
+ events = mask &
+ ( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) +
+ ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) +
+ ((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) +
+ ((s & SerialSignal_RI) ? MgslEvent_RiActive :MgslEvent_RiInactive) );
+ if (events) {
+ spin_unlock_irqrestore(&info->irq_spinlock,flags);
+ goto exit;
+ }
+
+ /* save current irq counts */
+ cprev = info->icount;
+ oldsigs = info->input_signal_events;
+
+ /* enable hunt and idle irqs if needed */
+ if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) {
+ u16 oldreg = usc_InReg(info,RICR);
+ u16 newreg = oldreg +
+ (mask & MgslEvent_ExitHuntMode ? RXSTATUS_EXITED_HUNT:0) +
+ (mask & MgslEvent_IdleReceived ? RXSTATUS_IDLE_RECEIVED:0);
+ if (oldreg != newreg)
+ usc_OutReg(info, RICR, newreg);
+ }
+
+ set_current_state(TASK_INTERRUPTIBLE);
+ add_wait_queue(&info->event_wait_q, &wait);
+
+ spin_unlock_irqrestore(&info->irq_spinlock,flags);
+
+
+ for(;;) {
+ schedule();
+ if (signal_pending(current)) {
+ rc = -ERESTARTSYS;
+ break;
+ }
+
+ /* get current irq counts */
+ spin_lock_irqsave(&info->irq_spinlock,flags);
+ cnow = info->icount;
+ newsigs = info->input_signal_events;
+ set_current_state(TASK_INTERRUPTIBLE);
+ spin_unlock_irqrestore(&info->irq_spinlock,flags);
+
+ /* if no change, wait aborted for some reason */
+ if (newsigs.dsr_up == oldsigs.dsr_up &&
+ newsigs.dsr_down == oldsigs.dsr_down &&
+ newsigs.dcd_up == oldsigs.dcd_up &&
+ newsigs.dcd_down == oldsigs.dcd_down &&
+ newsigs.cts_up == oldsigs.cts_up &&
+ newsigs.cts_down == oldsigs.cts_down &&
+ newsigs.ri_up == oldsigs.ri_up &&
+ newsigs.ri_down == oldsigs.ri_down &&
+ cnow.exithunt == cprev.exithunt &&
+ cnow.rxidle == cprev.rxidle) {
+ rc = -EIO;
+ break;
+ }
+
+ events = mask &
+ ( (newsigs.dsr_up != oldsigs.dsr_up ? MgslEvent_DsrActive:0) +
+ (newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) +
+ (newsigs.dcd_up != oldsigs.dcd_up ? MgslEvent_DcdActive:0) +
+ (newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) +
+ (newsigs.cts_up != oldsigs.cts_up ? MgslEvent_CtsActive:0) +
+ (newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) +
+ (newsigs.ri_up != oldsigs.ri_up ? MgslEvent_RiActive:0) +
+ (newsigs.ri_down != oldsigs.ri_down ? MgslEvent_RiInactive:0) +
+ (cnow.exithunt != cprev.exithunt ? MgslEvent_ExitHuntMode:0) +
+ (cnow.rxidle != cprev.rxidle ? MgslEvent_IdleReceived:0) );
+ if (events)
+ break;
+
+ cprev = cnow;
+ oldsigs = newsigs;
+ }
+
+ remove_wait_queue(&info->event_wait_q, &wait);
+ set_current_state(TASK_RUNNING);
+
+ if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) {
+ spin_lock_irqsave(&info->irq_spinlock,flags);
+ if (!waitqueue_active(&info->event_wait_q)) {
+ /* disable enable exit hunt mode/idle rcvd IRQs */
+ usc_OutReg(info, RICR, usc_InReg(info,RICR) &
+ ~(RXSTATUS_EXITED_HUNT + RXSTATUS_IDLE_RECEIVED));
+ }
+ spin_unlock_irqrestore(&info->irq_spinlock,flags);
+ }
+exit:
+ if ( rc == 0 )
+ PUT_USER(rc, events, mask_ptr);
+
+ return rc;
+
+} /* end of mgsl_wait_event() */
+
+static int modem_input_wait(struct mgsl_struct *info,int arg)
+{
+ unsigned long flags;
+ int rc;
+ struct mgsl_icount cprev, cnow;
+ DECLARE_WAITQUEUE(wait, current);
+
+ /* save current irq counts */
+ spin_lock_irqsave(&info->irq_spinlock,flags);
+ cprev = info->icount;
+ add_wait_queue(&info->status_event_wait_q, &wait);
+ set_current_state(TASK_INTERRUPTIBLE);
+ spin_unlock_irqrestore(&info->irq_spinlock,flags);
+
+ for(;;) {
+ schedule();
+ if (signal_pending(current)) {
+ rc = -ERESTARTSYS;
+ break;
+ }
+
+ /* get new irq counts */
+ spin_lock_irqsave(&info->irq_spinlock,flags);
+ cnow = info->icount;
+ set_current_state(TASK_INTERRUPTIBLE);
+ spin_unlock_irqrestore(&info->irq_spinlock,flags);
+
+ /* if no change, wait aborted for some reason */
+ if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
+ cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) {
+ rc = -EIO;
+ break;
+ }
+
+ /* check for change in caller specified modem input */
+ if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) ||
+ (arg & TIOCM_DSR && cnow.dsr != cprev.dsr) ||
+ (arg & TIOCM_CD && cnow.dcd != cprev.dcd) ||
+ (arg & TIOCM_CTS && cnow.cts != cprev.cts)) {
+ rc = 0;
+ break;
+ }
+
+ cprev = cnow;
+ }
+ remove_wait_queue(&info->status_event_wait_q, &wait);
+ set_current_state(TASK_RUNNING);
+ return rc;
+}
+
+/* return the state of the serial control and status signals
+ */
+static int tiocmget(struct tty_struct *tty)
+{
+ struct mgsl_struct *info = tty->driver_data;
+ unsigned int result;
+ unsigned long flags;
+
+ spin_lock_irqsave(&info->irq_spinlock,flags);
+ usc_get_serial_signals(info);
+ spin_unlock_irqrestore(&info->irq_spinlock,flags);
+
+ result = ((info->serial_signals & SerialSignal_RTS) ? TIOCM_RTS:0) +
+ ((info->serial_signals & SerialSignal_DTR) ? TIOCM_DTR:0) +
+ ((info->serial_signals & SerialSignal_DCD) ? TIOCM_CAR:0) +
+ ((info->serial_signals & SerialSignal_RI) ? TIOCM_RNG:0) +
+ ((info->serial_signals & SerialSignal_DSR) ? TIOCM_DSR:0) +
+ ((info->serial_signals & SerialSignal_CTS) ? TIOCM_CTS:0);
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):%s tiocmget() value=%08X\n",
+ __FILE__,__LINE__, info->device_name, result );
+ return result;
+}
+
+/* set modem control signals (DTR/RTS)
+ */
+static int tiocmset(struct tty_struct *tty,
+ unsigned int set, unsigned int clear)
+{
+ struct mgsl_struct *info = tty->driver_data;
+ unsigned long flags;
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):%s tiocmset(%x,%x)\n",
+ __FILE__,__LINE__,info->device_name, set, clear);
+
+ if (set & TIOCM_RTS)
+ info->serial_signals |= SerialSignal_RTS;
+ if (set & TIOCM_DTR)
+ info->serial_signals |= SerialSignal_DTR;
+ if (clear & TIOCM_RTS)
+ info->serial_signals &= ~SerialSignal_RTS;
+ if (clear & TIOCM_DTR)
+ info->serial_signals &= ~SerialSignal_DTR;
+
+ spin_lock_irqsave(&info->irq_spinlock,flags);
+ usc_set_serial_signals(info);
+ spin_unlock_irqrestore(&info->irq_spinlock,flags);
+
+ return 0;
+}
+
+/* mgsl_break() Set or clear transmit break condition
+ *
+ * Arguments: tty pointer to tty instance data
+ * break_state -1=set break condition, 0=clear
+ * Return Value: error code
+ */
+static int mgsl_break(struct tty_struct *tty, int break_state)
+{
+ struct mgsl_struct * info = tty->driver_data;
+ unsigned long flags;
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):mgsl_break(%s,%d)\n",
+ __FILE__,__LINE__, info->device_name, break_state);
+
+ if (mgsl_paranoia_check(info, tty->name, "mgsl_break"))
+ return -EINVAL;
+
+ spin_lock_irqsave(&info->irq_spinlock,flags);
+ if (break_state == -1)
+ usc_OutReg(info,IOCR,(u16)(usc_InReg(info,IOCR) | BIT7));
+ else
+ usc_OutReg(info,IOCR,(u16)(usc_InReg(info,IOCR) & ~BIT7));
+ spin_unlock_irqrestore(&info->irq_spinlock,flags);
+ return 0;
+
+} /* end of mgsl_break() */
+
+/*
+ * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
+ * Return: write counters to the user passed counter struct
+ * NB: both 1->0 and 0->1 transitions are counted except for
+ * RI where only 0->1 is counted.
+ */
+static int msgl_get_icount(struct tty_struct *tty,
+ struct serial_icounter_struct *icount)
+
+{
+ struct mgsl_struct * info = tty->driver_data;
+ struct mgsl_icount cnow; /* kernel counter temps */
+ unsigned long flags;
+
+ spin_lock_irqsave(&info->irq_spinlock,flags);
+ cnow = info->icount;
+ spin_unlock_irqrestore(&info->irq_spinlock,flags);
+
+ icount->cts = cnow.cts;
+ icount->dsr = cnow.dsr;
+ icount->rng = cnow.rng;
+ icount->dcd = cnow.dcd;
+ icount->rx = cnow.rx;
+ icount->tx = cnow.tx;
+ icount->frame = cnow.frame;
+ icount->overrun = cnow.overrun;
+ icount->parity = cnow.parity;
+ icount->brk = cnow.brk;
+ icount->buf_overrun = cnow.buf_overrun;
+ return 0;
+}
+
+/* mgsl_ioctl() Service an IOCTL request
+ *
+ * Arguments:
+ *
+ * tty pointer to tty instance data
+ * cmd IOCTL command code
+ * arg command argument/context
+ *
+ * Return Value: 0 if success, otherwise error code
+ */
+static int mgsl_ioctl(struct tty_struct *tty,
+ unsigned int cmd, unsigned long arg)
+{
+ struct mgsl_struct * info = tty->driver_data;
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):mgsl_ioctl %s cmd=%08X\n", __FILE__,__LINE__,
+ info->device_name, cmd );
+
+ if (mgsl_paranoia_check(info, tty->name, "mgsl_ioctl"))
+ return -ENODEV;
+
+ if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
+ (cmd != TIOCMIWAIT)) {
+ if (tty->flags & (1 << TTY_IO_ERROR))
+ return -EIO;
+ }
+
+ return mgsl_ioctl_common(info, cmd, arg);
+}
+
+static int mgsl_ioctl_common(struct mgsl_struct *info, unsigned int cmd, unsigned long arg)
+{
+ void __user *argp = (void __user *)arg;
+
+ switch (cmd) {
+ case MGSL_IOCGPARAMS:
+ return mgsl_get_params(info, argp);
+ case MGSL_IOCSPARAMS:
+ return mgsl_set_params(info, argp);
+ case MGSL_IOCGTXIDLE:
+ return mgsl_get_txidle(info, argp);
+ case MGSL_IOCSTXIDLE:
+ return mgsl_set_txidle(info,(int)arg);
+ case MGSL_IOCTXENABLE:
+ return mgsl_txenable(info,(int)arg);
+ case MGSL_IOCRXENABLE:
+ return mgsl_rxenable(info,(int)arg);
+ case MGSL_IOCTXABORT:
+ return mgsl_txabort(info);
+ case MGSL_IOCGSTATS:
+ return mgsl_get_stats(info, argp);
+ case MGSL_IOCWAITEVENT:
+ return mgsl_wait_event(info, argp);
+ case MGSL_IOCLOOPTXDONE:
+ return mgsl_loopmode_send_done(info);
+ /* Wait for modem input (DCD,RI,DSR,CTS) change
+ * as specified by mask in arg (TIOCM_RNG/DSR/CD/CTS)
+ */
+ case TIOCMIWAIT:
+ return modem_input_wait(info,(int)arg);
+
+ default:
+ return -ENOIOCTLCMD;
+ }
+ return 0;
+}
+
+/* mgsl_set_termios()
+ *
+ * Set new termios settings
+ *
+ * Arguments:
+ *
+ * tty pointer to tty structure
+ * termios pointer to buffer to hold returned old termios
+ *
+ * Return Value: None
+ */
+static void mgsl_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
+{
+ struct mgsl_struct *info = tty->driver_data;
+ unsigned long flags;
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):mgsl_set_termios %s\n", __FILE__,__LINE__,
+ tty->driver->name );
+
+ mgsl_change_params(info);
+
+ /* Handle transition to B0 status */
+ if (old_termios->c_cflag & CBAUD &&
+ !(tty->termios->c_cflag & CBAUD)) {
+ info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
+ spin_lock_irqsave(&info->irq_spinlock,flags);
+ usc_set_serial_signals(info);
+ spin_unlock_irqrestore(&info->irq_spinlock,flags);
+ }
+
+ /* Handle transition away from B0 status */
+ if (!(old_termios->c_cflag & CBAUD) &&
+ tty->termios->c_cflag & CBAUD) {
+ info->serial_signals |= SerialSignal_DTR;
+ if (!(tty->termios->c_cflag & CRTSCTS) ||
+ !test_bit(TTY_THROTTLED, &tty->flags)) {
+ info->serial_signals |= SerialSignal_RTS;
+ }
+ spin_lock_irqsave(&info->irq_spinlock,flags);
+ usc_set_serial_signals(info);
+ spin_unlock_irqrestore(&info->irq_spinlock,flags);
+ }
+
+ /* Handle turning off CRTSCTS */
+ if (old_termios->c_cflag & CRTSCTS &&
+ !(tty->termios->c_cflag & CRTSCTS)) {
+ tty->hw_stopped = 0;
+ mgsl_start(tty);
+ }
+
+} /* end of mgsl_set_termios() */
+
+/* mgsl_close()
+ *
+ * Called when port is closed. Wait for remaining data to be
+ * sent. Disable port and free resources.
+ *
+ * Arguments:
+ *
+ * tty pointer to open tty structure
+ * filp pointer to open file object
+ *
+ * Return Value: None
+ */
+static void mgsl_close(struct tty_struct *tty, struct file * filp)
+{
+ struct mgsl_struct * info = tty->driver_data;
+
+ if (mgsl_paranoia_check(info, tty->name, "mgsl_close"))
+ return;
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):mgsl_close(%s) entry, count=%d\n",
+ __FILE__,__LINE__, info->device_name, info->port.count);
+
+ if (tty_port_close_start(&info->port, tty, filp) == 0)
+ goto cleanup;
+
+ mutex_lock(&info->port.mutex);
+ if (info->port.flags & ASYNC_INITIALIZED)
+ mgsl_wait_until_sent(tty, info->timeout);
+ mgsl_flush_buffer(tty);
+ tty_ldisc_flush(tty);
+ shutdown(info);
+ mutex_unlock(&info->port.mutex);
+
+ tty_port_close_end(&info->port, tty);
+ info->port.tty = NULL;
+cleanup:
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):mgsl_close(%s) exit, count=%d\n", __FILE__,__LINE__,
+ tty->driver->name, info->port.count);
+
+} /* end of mgsl_close() */
+
+/* mgsl_wait_until_sent()
+ *
+ * Wait until the transmitter is empty.
+ *
+ * Arguments:
+ *
+ * tty pointer to tty info structure
+ * timeout time to wait for send completion
+ *
+ * Return Value: None
+ */
+static void mgsl_wait_until_sent(struct tty_struct *tty, int timeout)
+{
+ struct mgsl_struct * info = tty->driver_data;
+ unsigned long orig_jiffies, char_time;
+
+ if (!info )
+ return;
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):mgsl_wait_until_sent(%s) entry\n",
+ __FILE__,__LINE__, info->device_name );
+
+ if (mgsl_paranoia_check(info, tty->name, "mgsl_wait_until_sent"))
+ return;
+
+ if (!(info->port.flags & ASYNC_INITIALIZED))
+ goto exit;
+
+ orig_jiffies = jiffies;
+
+ /* Set check interval to 1/5 of estimated time to
+ * send a character, and make it at least 1. The check
+ * interval should also be less than the timeout.
+ * Note: use tight timings here to satisfy the NIST-PCTS.
+ */
+
+ if ( info->params.data_rate ) {
+ char_time = info->timeout/(32 * 5);
+ if (!char_time)
+ char_time++;
+ } else
+ char_time = 1;
+
+ if (timeout)
+ char_time = min_t(unsigned long, char_time, timeout);
+
+ if ( info->params.mode == MGSL_MODE_HDLC ||
+ info->params.mode == MGSL_MODE_RAW ) {
+ while (info->tx_active) {
+ msleep_interruptible(jiffies_to_msecs(char_time));
+ if (signal_pending(current))
+ break;
+ if (timeout && time_after(jiffies, orig_jiffies + timeout))
+ break;
+ }
+ } else {
+ while (!(usc_InReg(info,TCSR) & TXSTATUS_ALL_SENT) &&
+ info->tx_enabled) {
+ msleep_interruptible(jiffies_to_msecs(char_time));
+ if (signal_pending(current))
+ break;
+ if (timeout && time_after(jiffies, orig_jiffies + timeout))
+ break;
+ }
+ }
+
+exit:
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):mgsl_wait_until_sent(%s) exit\n",
+ __FILE__,__LINE__, info->device_name );
+
+} /* end of mgsl_wait_until_sent() */
+
+/* mgsl_hangup()
+ *
+ * Called by tty_hangup() when a hangup is signaled.
+ * This is the same as to closing all open files for the port.
+ *
+ * Arguments: tty pointer to associated tty object
+ * Return Value: None
+ */
+static void mgsl_hangup(struct tty_struct *tty)
+{
+ struct mgsl_struct * info = tty->driver_data;
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):mgsl_hangup(%s)\n",
+ __FILE__,__LINE__, info->device_name );
+
+ if (mgsl_paranoia_check(info, tty->name, "mgsl_hangup"))
+ return;
+
+ mgsl_flush_buffer(tty);
+ shutdown(info);
+
+ info->port.count = 0;
+ info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
+ info->port.tty = NULL;
+
+ wake_up_interruptible(&info->port.open_wait);
+
+} /* end of mgsl_hangup() */
+
+/*
+ * carrier_raised()
+ *
+ * Return true if carrier is raised
+ */
+
+static int carrier_raised(struct tty_port *port)
+{
+ unsigned long flags;
+ struct mgsl_struct *info = container_of(port, struct mgsl_struct, port);
+
+ spin_lock_irqsave(&info->irq_spinlock, flags);
+ usc_get_serial_signals(info);
+ spin_unlock_irqrestore(&info->irq_spinlock, flags);
+ return (info->serial_signals & SerialSignal_DCD) ? 1 : 0;
+}
+
+static void dtr_rts(struct tty_port *port, int on)
+{
+ struct mgsl_struct *info = container_of(port, struct mgsl_struct, port);
+ unsigned long flags;
+
+ spin_lock_irqsave(&info->irq_spinlock,flags);
+ if (on)
+ info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
+ else
+ info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
+ usc_set_serial_signals(info);
+ spin_unlock_irqrestore(&info->irq_spinlock,flags);
+}
+
+
+/* block_til_ready()
+ *
+ * Block the current process until the specified port
+ * is ready to be opened.
+ *
+ * Arguments:
+ *
+ * tty pointer to tty info structure
+ * filp pointer to open file object
+ * info pointer to device instance data
+ *
+ * Return Value: 0 if success, otherwise error code
+ */
+static int block_til_ready(struct tty_struct *tty, struct file * filp,
+ struct mgsl_struct *info)
+{
+ DECLARE_WAITQUEUE(wait, current);
+ int retval;
+ bool do_clocal = false;
+ bool extra_count = false;
+ unsigned long flags;
+ int dcd;
+ struct tty_port *port = &info->port;
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):block_til_ready on %s\n",
+ __FILE__,__LINE__, tty->driver->name );
+
+ if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){
+ /* nonblock mode is set or port is not enabled */
+ port->flags |= ASYNC_NORMAL_ACTIVE;
+ return 0;
+ }
+
+ if (tty->termios->c_cflag & CLOCAL)
+ do_clocal = true;
+
+ /* Wait for carrier detect and the line to become
+ * free (i.e., not in use by the callout). While we are in
+ * this loop, port->count is dropped by one, so that
+ * mgsl_close() knows when to free things. We restore it upon
+ * exit, either normal or abnormal.
+ */
+
+ retval = 0;
+ add_wait_queue(&port->open_wait, &wait);
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):block_til_ready before block on %s count=%d\n",
+ __FILE__,__LINE__, tty->driver->name, port->count );
+
+ spin_lock_irqsave(&info->irq_spinlock, flags);
+ if (!tty_hung_up_p(filp)) {
+ extra_count = true;
+ port->count--;
+ }
+ spin_unlock_irqrestore(&info->irq_spinlock, flags);
+ port->blocked_open++;
+
+ while (1) {
+ if (tty->termios->c_cflag & CBAUD)
+ tty_port_raise_dtr_rts(port);
+
+ set_current_state(TASK_INTERRUPTIBLE);
+
+ if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)){
+ retval = (port->flags & ASYNC_HUP_NOTIFY) ?
+ -EAGAIN : -ERESTARTSYS;
+ break;
+ }
+
+ dcd = tty_port_carrier_raised(&info->port);
+
+ if (!(port->flags & ASYNC_CLOSING) && (do_clocal || dcd))
+ break;
+
+ if (signal_pending(current)) {
+ retval = -ERESTARTSYS;
+ break;
+ }
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):block_til_ready blocking on %s count=%d\n",
+ __FILE__,__LINE__, tty->driver->name, port->count );
+
+ tty_unlock();
+ schedule();
+ tty_lock();
+ }
+
+ set_current_state(TASK_RUNNING);
+ remove_wait_queue(&port->open_wait, &wait);
+
+ /* FIXME: Racy on hangup during close wait */
+ if (extra_count)
+ port->count++;
+ port->blocked_open--;
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):block_til_ready after blocking on %s count=%d\n",
+ __FILE__,__LINE__, tty->driver->name, port->count );
+
+ if (!retval)
+ port->flags |= ASYNC_NORMAL_ACTIVE;
+
+ return retval;
+
+} /* end of block_til_ready() */
+
+/* mgsl_open()
+ *
+ * Called when a port is opened. Init and enable port.
+ * Perform serial-specific initialization for the tty structure.
+ *
+ * Arguments: tty pointer to tty info structure
+ * filp associated file pointer
+ *
+ * Return Value: 0 if success, otherwise error code
+ */
+static int mgsl_open(struct tty_struct *tty, struct file * filp)
+{
+ struct mgsl_struct *info;
+ int retval, line;
+ unsigned long flags;
+
+ /* verify range of specified line number */
+ line = tty->index;
+ if ((line < 0) || (line >= mgsl_device_count)) {
+ printk("%s(%d):mgsl_open with invalid line #%d.\n",
+ __FILE__,__LINE__,line);
+ return -ENODEV;
+ }
+
+ /* find the info structure for the specified line */
+ info = mgsl_device_list;
+ while(info && info->line != line)
+ info = info->next_device;
+ if (mgsl_paranoia_check(info, tty->name, "mgsl_open"))
+ return -ENODEV;
+
+ tty->driver_data = info;
+ info->port.tty = tty;
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):mgsl_open(%s), old ref count = %d\n",
+ __FILE__,__LINE__,tty->driver->name, info->port.count);
+
+ /* If port is closing, signal caller to try again */
+ if (tty_hung_up_p(filp) || info->port.flags & ASYNC_CLOSING){
+ if (info->port.flags & ASYNC_CLOSING)
+ interruptible_sleep_on(&info->port.close_wait);
+ retval = ((info->port.flags & ASYNC_HUP_NOTIFY) ?
+ -EAGAIN : -ERESTARTSYS);
+ goto cleanup;
+ }
+
+ info->port.tty->low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+
+ spin_lock_irqsave(&info->netlock, flags);
+ if (info->netcount) {
+ retval = -EBUSY;
+ spin_unlock_irqrestore(&info->netlock, flags);
+ goto cleanup;
+ }
+ info->port.count++;
+ spin_unlock_irqrestore(&info->netlock, flags);
+
+ if (info->port.count == 1) {
+ /* 1st open on this device, init hardware */
+ retval = startup(info);
+ if (retval < 0)
+ goto cleanup;
+ }
+
+ retval = block_til_ready(tty, filp, info);
+ if (retval) {
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):block_til_ready(%s) returned %d\n",
+ __FILE__,__LINE__, info->device_name, retval);
+ goto cleanup;
+ }
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s(%d):mgsl_open(%s) success\n",
+ __FILE__,__LINE__, info->device_name);
+ retval = 0;
+
+cleanup:
+ if (retval) {
+ if (tty->count == 1)
+ info->port.tty = NULL; /* tty layer will release tty struct */
+ if(info->port.count)
+ info->port.count--;
+ }
+
+ return retval;
+
+} /* end of mgsl_open() */
+
+/*
+ * /proc fs routines....
+ */
+
+static inline void line_info(struct seq_file *m, struct mgsl_struct *info)
+{
+ char stat_buf[30];
+ unsigned long flags;
+
+ if (info->bus_type == MGSL_BUS_TYPE_PCI) {
+ seq_printf(m, "%s:PCI io:%04X irq:%d mem:%08X lcr:%08X",
+ info->device_name, info->io_base, info->irq_level,
+ info->phys_memory_base, info->phys_lcr_base);
+ } else {
+ seq_printf(m, "%s:(E)ISA io:%04X irq:%d dma:%d",
+ info->device_name, info->io_base,
+ info->irq_level, info->dma_level);
+ }
+
+ /* output current serial signal states */
+ spin_lock_irqsave(&info->irq_spinlock,flags);
+ usc_get_serial_signals(info);
+ spin_unlock_irqrestore(&info->irq_spinlock,flags);
+
+ stat_buf[0] = 0;
+ stat_buf[1] = 0;
+ if (info->serial_signals & SerialSignal_RTS)
+ strcat(stat_buf, "|RTS");
+ if (info->serial_signals & SerialSignal_CTS)
+ strcat(stat_buf, "|CTS");
+ if (info->serial_signals & SerialSignal_DTR)
+ strcat(stat_buf, "|DTR");
+ if (info->serial_signals & SerialSignal_DSR)
+ strcat(stat_buf, "|DSR");
+ if (info->serial_signals & SerialSignal_DCD)
+ strcat(stat_buf, "|CD");
+ if (info->serial_signals & SerialSignal_RI)
+ strcat(stat_buf, "|RI");
+
+ if (info->params.mode == MGSL_MODE_HDLC ||
+ info->params.mode == MGSL_MODE_RAW ) {
+ seq_printf(m, " HDLC txok:%d rxok:%d",
+ info->icount.txok, info->icount.rxok);
+ if (info->icount.txunder)
+ seq_printf(m, " txunder:%d", info->icount.txunder);
+ if (info->icount.txabort)
+ seq_printf(m, " txabort:%d", info->icount.txabort);
+ if (info->icount.rxshort)
+ seq_printf(m, " rxshort:%d", info->icount.rxshort);
+ if (info->icount.rxlong)
+ seq_printf(m, " rxlong:%d", info->icount.rxlong);
+ if (info->icount.rxover)
+ seq_printf(m, " rxover:%d", info->icount.rxover);
+ if (info->icount.rxcrc)
+ seq_printf(m, " rxcrc:%d", info->icount.rxcrc);
+ } else {
+ seq_printf(m, " ASYNC tx:%d rx:%d",
+ info->icount.tx, info->icount.rx);
+ if (info->icount.frame)
+ seq_printf(m, " fe:%d", info->icount.frame);
+ if (info->icount.parity)
+ seq_printf(m, " pe:%d", info->icount.parity);
+ if (info->icount.brk)
+ seq_printf(m, " brk:%d", info->icount.brk);
+ if (info->icount.overrun)
+ seq_printf(m, " oe:%d", info->icount.overrun);
+ }
+
+ /* Append serial signal status to end */
+ seq_printf(m, " %s\n", stat_buf+1);
+
+ seq_printf(m, "txactive=%d bh_req=%d bh_run=%d pending_bh=%x\n",
+ info->tx_active,info->bh_requested,info->bh_running,
+ info->pending_bh);
+
+ spin_lock_irqsave(&info->irq_spinlock,flags);
+ {
+ u16 Tcsr = usc_InReg( info, TCSR );
+ u16 Tdmr = usc_InDmaReg( info, TDMR );
+ u16 Ticr = usc_InReg( info, TICR );
+ u16 Rscr = usc_InReg( info, RCSR );
+ u16 Rdmr = usc_InDmaReg( info, RDMR );
+ u16 Ricr = usc_InReg( info, RICR );
+ u16 Icr = usc_InReg( info, ICR );
+ u16 Dccr = usc_InReg( info, DCCR );
+ u16 Tmr = usc_InReg( info, TMR );
+ u16 Tccr = usc_InReg( info, TCCR );
+ u16 Ccar = inw( info->io_base + CCAR );
+ seq_printf(m, "tcsr=%04X tdmr=%04X ticr=%04X rcsr=%04X rdmr=%04X\n"
+ "ricr=%04X icr =%04X dccr=%04X tmr=%04X tccr=%04X ccar=%04X\n",
+ Tcsr,Tdmr,Ticr,Rscr,Rdmr,Ricr,Icr,Dccr,Tmr,Tccr,Ccar );
+ }
+ spin_unlock_irqrestore(&info->irq_spinlock,flags);
+}
+
+/* Called to print information about devices */
+static int mgsl_proc_show(struct seq_file *m, void *v)
+{
+ struct mgsl_struct *info;
+
+ seq_printf(m, "synclink driver:%s\n", driver_version);
+
+ info = mgsl_device_list;
+ while( info ) {
+ line_info(m, info);
+ info = info->next_device;
+ }
+ return 0;
+}
+
+static int mgsl_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, mgsl_proc_show, NULL);
+}
+
+static const struct file_operations mgsl_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = mgsl_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+/* mgsl_allocate_dma_buffers()
+ *
+ * Allocate and format DMA buffers (ISA adapter)
+ * or format shared memory buffers (PCI adapter).
+ *
+ * Arguments: info pointer to device instance data
+ * Return Value: 0 if success, otherwise error
+ */
+static int mgsl_allocate_dma_buffers(struct mgsl_struct *info)
+{
+ unsigned short BuffersPerFrame;
+
+ info->last_mem_alloc = 0;
+
+ /* Calculate the number of DMA buffers necessary to hold the */
+ /* largest allowable frame size. Note: If the max frame size is */
+ /* not an even multiple of the DMA buffer size then we need to */
+ /* round the buffer count per frame up one. */
+
+ BuffersPerFrame = (unsigned short)(info->max_frame_size/DMABUFFERSIZE);
+ if ( info->max_frame_size % DMABUFFERSIZE )
+ BuffersPerFrame++;
+
+ if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
+ /*
+ * The PCI adapter has 256KBytes of shared memory to use.
+ * This is 64 PAGE_SIZE buffers.
+ *
+ * The first page is used for padding at this time so the
+ * buffer list does not begin at offset 0 of the PCI
+ * adapter's shared memory.
+ *
+ * The 2nd page is used for the buffer list. A 4K buffer
+ * list can hold 128 DMA_BUFFER structures at 32 bytes
+ * each.
+ *
+ * This leaves 62 4K pages.
+ *
+ * The next N pages are used for transmit frame(s). We
+ * reserve enough 4K page blocks to hold the required
+ * number of transmit dma buffers (num_tx_dma_buffers),
+ * each of MaxFrameSize size.
+ *
+ * Of the remaining pages (62-N), determine how many can
+ * be used to receive full MaxFrameSize inbound frames
+ */
+ info->tx_buffer_count = info->num_tx_dma_buffers * BuffersPerFrame;
+ info->rx_buffer_count = 62 - info->tx_buffer_count;
+ } else {
+ /* Calculate the number of PAGE_SIZE buffers needed for */
+ /* receive and transmit DMA buffers. */
+
+
+ /* Calculate the number of DMA buffers necessary to */
+ /* hold 7 max size receive frames and one max size transmit frame. */
+ /* The receive buffer count is bumped by one so we avoid an */
+ /* End of List condition if all receive buffers are used when */
+ /* using linked list DMA buffers. */
+
+ info->tx_buffer_count = info->num_tx_dma_buffers * BuffersPerFrame;
+ info->rx_buffer_count = (BuffersPerFrame * MAXRXFRAMES) + 6;
+
+ /*
+ * limit total TxBuffers & RxBuffers to 62 4K total
+ * (ala PCI Allocation)
+ */
+
+ if ( (info->tx_buffer_count + info->rx_buffer_count) > 62 )
+ info->rx_buffer_count = 62 - info->tx_buffer_count;
+
+ }
+
+ if ( debug_level >= DEBUG_LEVEL_INFO )
+ printk("%s(%d):Allocating %d TX and %d RX DMA buffers.\n",
+ __FILE__,__LINE__, info->tx_buffer_count,info->rx_buffer_count);
+
+ if ( mgsl_alloc_buffer_list_memory( info ) < 0 ||
+ mgsl_alloc_frame_memory(info, info->rx_buffer_list, info->rx_buffer_count) < 0 ||
+ mgsl_alloc_frame_memory(info, info->tx_buffer_list, info->tx_buffer_count) < 0 ||
+ mgsl_alloc_intermediate_rxbuffer_memory(info) < 0 ||
+ mgsl_alloc_intermediate_txbuffer_memory(info) < 0 ) {
+ printk("%s(%d):Can't allocate DMA buffer memory\n",__FILE__,__LINE__);
+ return -ENOMEM;
+ }
+
+ mgsl_reset_rx_dma_buffers( info );
+ mgsl_reset_tx_dma_buffers( info );
+
+ return 0;
+
+} /* end of mgsl_allocate_dma_buffers() */
+
+/*
+ * mgsl_alloc_buffer_list_memory()
+ *
+ * Allocate a common DMA buffer for use as the
+ * receive and transmit buffer lists.
+ *
+ * A buffer list is a set of buffer entries where each entry contains
+ * a pointer to an actual buffer and a pointer to the next buffer entry
+ * (plus some other info about the buffer).
+ *
+ * The buffer entries for a list are built to form a circular list so
+ * that when the entire list has been traversed you start back at the
+ * beginning.
+ *
+ * This function allocates memory for just the buffer entries.
+ * The links (pointer to next entry) are filled in with the physical
+ * address of the next entry so the adapter can navigate the list
+ * using bus master DMA. The pointers to the actual buffers are filled
+ * out later when the actual buffers are allocated.
+ *
+ * Arguments: info pointer to device instance data
+ * Return Value: 0 if success, otherwise error
+ */
+static int mgsl_alloc_buffer_list_memory( struct mgsl_struct *info )
+{
+ unsigned int i;
+
+ if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
+ /* PCI adapter uses shared memory. */
+ info->buffer_list = info->memory_base + info->last_mem_alloc;
+ info->buffer_list_phys = info->last_mem_alloc;
+ info->last_mem_alloc += BUFFERLISTSIZE;
+ } else {
+ /* ISA adapter uses system memory. */
+ /* The buffer lists are allocated as a common buffer that both */
+ /* the processor and adapter can access. This allows the driver to */
+ /* inspect portions of the buffer while other portions are being */
+ /* updated by the adapter using Bus Master DMA. */
+
+ info->buffer_list = dma_alloc_coherent(NULL, BUFFERLISTSIZE, &info->buffer_list_dma_addr, GFP_KERNEL);
+ if (info->buffer_list == NULL)
+ return -ENOMEM;
+ info->buffer_list_phys = (u32)(info->buffer_list_dma_addr);
+ }
+
+ /* We got the memory for the buffer entry lists. */
+ /* Initialize the memory block to all zeros. */
+ memset( info->buffer_list, 0, BUFFERLISTSIZE );
+
+ /* Save virtual address pointers to the receive and */
+ /* transmit buffer lists. (Receive 1st). These pointers will */
+ /* be used by the processor to access the lists. */
+ info->rx_buffer_list = (DMABUFFERENTRY *)info->buffer_list;
+ info->tx_buffer_list = (DMABUFFERENTRY *)info->buffer_list;
+ info->tx_buffer_list += info->rx_buffer_count;
+
+ /*
+ * Build the links for the buffer entry lists such that
+ * two circular lists are built. (Transmit and Receive).
+ *
+ * Note: the links are physical addresses
+ * which are read by the adapter to determine the next
+ * buffer entry to use.
+ */
+
+ for ( i = 0; i < info->rx_buffer_count; i++ ) {
+ /* calculate and store physical address of this buffer entry */
+ info->rx_buffer_list[i].phys_entry =
+ info->buffer_list_phys + (i * sizeof(DMABUFFERENTRY));
+
+ /* calculate and store physical address of */
+ /* next entry in cirular list of entries */
+
+ info->rx_buffer_list[i].link = info->buffer_list_phys;
+
+ if ( i < info->rx_buffer_count - 1 )
+ info->rx_buffer_list[i].link += (i + 1) * sizeof(DMABUFFERENTRY);
+ }
+
+ for ( i = 0; i < info->tx_buffer_count; i++ ) {
+ /* calculate and store physical address of this buffer entry */
+ info->tx_buffer_list[i].phys_entry = info->buffer_list_phys +
+ ((info->rx_buffer_count + i) * sizeof(DMABUFFERENTRY));
+
+ /* calculate and store physical address of */
+ /* next entry in cirular list of entries */
+
+ info->tx_buffer_list[i].link = info->buffer_list_phys +
+ info->rx_buffer_count * sizeof(DMABUFFERENTRY);
+
+ if ( i < info->tx_buffer_count - 1 )
+ info->tx_buffer_list[i].link += (i + 1) * sizeof(DMABUFFERENTRY);
+ }
+
+ return 0;
+
+} /* end of mgsl_alloc_buffer_list_memory() */
+
+/* Free DMA buffers allocated for use as the
+ * receive and transmit buffer lists.
+ * Warning:
+ *
+ * The data transfer buffers associated with the buffer list
+ * MUST be freed before freeing the buffer list itself because
+ * the buffer list contains the information necessary to free
+ * the individual buffers!
+ */
+static void mgsl_free_buffer_list_memory( struct mgsl_struct *info )
+{
+ if (info->buffer_list && info->bus_type != MGSL_BUS_TYPE_PCI)
+ dma_free_coherent(NULL, BUFFERLISTSIZE, info->buffer_list, info->buffer_list_dma_addr);
+
+ info->buffer_list = NULL;
+ info->rx_buffer_list = NULL;
+ info->tx_buffer_list = NULL;
+
+} /* end of mgsl_free_buffer_list_memory() */
+
+/*
+ * mgsl_alloc_frame_memory()
+ *
+ * Allocate the frame DMA buffers used by the specified buffer list.
+ * Each DMA buffer will be one memory page in size. This is necessary
+ * because memory can fragment enough that it may be impossible
+ * contiguous pages.
+ *
+ * Arguments:
+ *
+ * info pointer to device instance data
+ * BufferList pointer to list of buffer entries
+ * Buffercount count of buffer entries in buffer list
+ *
+ * Return Value: 0 if success, otherwise -ENOMEM
+ */
+static int mgsl_alloc_frame_memory(struct mgsl_struct *info,DMABUFFERENTRY *BufferList,int Buffercount)
+{
+ int i;
+ u32 phys_addr;
+
+ /* Allocate page sized buffers for the receive buffer list */
+
+ for ( i = 0; i < Buffercount; i++ ) {
+ if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
+ /* PCI adapter uses shared memory buffers. */
+ BufferList[i].virt_addr = info->memory_base + info->last_mem_alloc;
+ phys_addr = info->last_mem_alloc;
+ info->last_mem_alloc += DMABUFFERSIZE;
+ } else {
+ /* ISA adapter uses system memory. */
+ BufferList[i].virt_addr = dma_alloc_coherent(NULL, DMABUFFERSIZE, &BufferList[i].dma_addr, GFP_KERNEL);
+ if (BufferList[i].virt_addr == NULL)
+ return -ENOMEM;
+ phys_addr = (u32)(BufferList[i].dma_addr);
+ }
+ BufferList[i].phys_addr = phys_addr;
+ }
+
+ return 0;
+
+} /* end of mgsl_alloc_frame_memory() */
+
+/*
+ * mgsl_free_frame_memory()
+ *
+ * Free the buffers associated with
+ * each buffer entry of a buffer list.
+ *
+ * Arguments:
+ *
+ * info pointer to device instance data
+ * BufferList pointer to list of buffer entries
+ * Buffercount count of buffer entries in buffer list
+ *
+ * Return Value: None
+ */
+static void mgsl_free_frame_memory(struct mgsl_struct *info, DMABUFFERENTRY *BufferList, int Buffercount)
+{
+ int i;
+
+ if ( BufferList ) {
+ for ( i = 0 ; i < Buffercount ; i++ ) {
+ if ( BufferList[i].virt_addr ) {
+ if ( info->bus_type != MGSL_BUS_TYPE_PCI )
+ dma_free_coherent(NULL, DMABUFFERSIZE, BufferList[i].virt_addr, BufferList[i].dma_addr);
+ BufferList[i].virt_addr = NULL;
+ }
+ }
+ }
+
+} /* end of mgsl_free_frame_memory() */
+
+/* mgsl_free_dma_buffers()
+ *
+ * Free DMA buffers
+ *
+ * Arguments: info pointer to device instance data
+ * Return Value: None
+ */
+static void mgsl_free_dma_buffers( struct mgsl_struct *info )
+{
+ mgsl_free_frame_memory( info, info->rx_buffer_list, info->rx_buffer_count );
+ mgsl_free_frame_memory( info, info->tx_buffer_list, info->tx_buffer_count );
+ mgsl_free_buffer_list_memory( info );
+
+} /* end of mgsl_free_dma_buffers() */
+
+
+/*
+ * mgsl_alloc_intermediate_rxbuffer_memory()
+ *
+ * Allocate a buffer large enough to hold max_frame_size. This buffer
+ * is used to pass an assembled frame to the line discipline.
+ *
+ * Arguments:
+ *
+ * info pointer to device instance data
+ *
+ * Return Value: 0 if success, otherwise -ENOMEM
+ */
+static int mgsl_alloc_intermediate_rxbuffer_memory(struct mgsl_struct *info)
+{
+ info->intermediate_rxbuffer = kmalloc(info->max_frame_size, GFP_KERNEL | GFP_DMA);
+ if ( info->intermediate_rxbuffer == NULL )
+ return -ENOMEM;
+
+ return 0;
+
+} /* end of mgsl_alloc_intermediate_rxbuffer_memory() */
+
+/*
+ * mgsl_free_intermediate_rxbuffer_memory()
+ *
+ *
+ * Arguments:
+ *
+ * info pointer to device instance data
+ *
+ * Return Value: None
+ */
+static void mgsl_free_intermediate_rxbuffer_memory(struct mgsl_struct *info)
+{
+ kfree(info->intermediate_rxbuffer);
+ info->intermediate_rxbuffer = NULL;
+
+} /* end of mgsl_free_intermediate_rxbuffer_memory() */
+
+/*
+ * mgsl_alloc_intermediate_txbuffer_memory()
+ *
+ * Allocate intermdiate transmit buffer(s) large enough to hold max_frame_size.
+ * This buffer is used to load transmit frames into the adapter's dma transfer
+ * buffers when there is sufficient space.
+ *
+ * Arguments:
+ *
+ * info pointer to device instance data
+ *
+ * Return Value: 0 if success, otherwise -ENOMEM
+ */
+static int mgsl_alloc_intermediate_txbuffer_memory(struct mgsl_struct *info)
+{
+ int i;
+
+ if ( debug_level >= DEBUG_LEVEL_INFO )
+ printk("%s %s(%d) allocating %d tx holding buffers\n",
+ info->device_name, __FILE__,__LINE__,info->num_tx_holding_buffers);
+
+ memset(info->tx_holding_buffers,0,sizeof(info->tx_holding_buffers));
+
+ for ( i=0; i<info->num_tx_holding_buffers; ++i) {
+ info->tx_holding_buffers[i].buffer =
+ kmalloc(info->max_frame_size, GFP_KERNEL);
+ if (info->tx_holding_buffers[i].buffer == NULL) {
+ for (--i; i >= 0; i--) {
+ kfree(info->tx_holding_buffers[i].buffer);
+ info->tx_holding_buffers[i].buffer = NULL;
+ }
+ return -ENOMEM;
+ }
+ }
+
+ return 0;
+
+} /* end of mgsl_alloc_intermediate_txbuffer_memory() */
+
+/*
+ * mgsl_free_intermediate_txbuffer_memory()
+ *
+ *
+ * Arguments:
+ *
+ * info pointer to device instance data
+ *
+ * Return Value: None
+ */
+static void mgsl_free_intermediate_txbuffer_memory(struct mgsl_struct *info)
+{
+ int i;
+
+ for ( i=0; i<info->num_tx_holding_buffers; ++i ) {
+ kfree(info->tx_holding_buffers[i].buffer);
+ info->tx_holding_buffers[i].buffer = NULL;
+ }
+
+ info->get_tx_holding_index = 0;
+ info->put_tx_holding_index = 0;
+ info->tx_holding_count = 0;
+
+} /* end of mgsl_free_intermediate_txbuffer_memory() */
+
+
+/*
+ * load_next_tx_holding_buffer()
+ *
+ * attempts to load the next buffered tx request into the
+ * tx dma buffers
+ *
+ * Arguments:
+ *
+ * info pointer to device instance data
+ *
+ * Return Value: true if next buffered tx request loaded
+ * into adapter's tx dma buffer,
+ * false otherwise
+ */
+static bool load_next_tx_holding_buffer(struct mgsl_struct *info)
+{
+ bool ret = false;
+
+ if ( info->tx_holding_count ) {
+ /* determine if we have enough tx dma buffers
+ * to accommodate the next tx frame
+ */
+ struct tx_holding_buffer *ptx =
+ &info->tx_holding_buffers[info->get_tx_holding_index];
+ int num_free = num_free_tx_dma_buffers(info);
+ int num_needed = ptx->buffer_size / DMABUFFERSIZE;
+ if ( ptx->buffer_size % DMABUFFERSIZE )
+ ++num_needed;
+
+ if (num_needed <= num_free) {
+ info->xmit_cnt = ptx->buffer_size;
+ mgsl_load_tx_dma_buffer(info,ptx->buffer,ptx->buffer_size);
+
+ --info->tx_holding_count;
+ if ( ++info->get_tx_holding_index >= info->num_tx_holding_buffers)
+ info->get_tx_holding_index=0;
+
+ /* restart transmit timer */
+ mod_timer(&info->tx_timer, jiffies + msecs_to_jiffies(5000));
+
+ ret = true;
+ }
+ }
+
+ return ret;
+}
+
+/*
+ * save_tx_buffer_request()
+ *
+ * attempt to store transmit frame request for later transmission
+ *
+ * Arguments:
+ *
+ * info pointer to device instance data
+ * Buffer pointer to buffer containing frame to load
+ * BufferSize size in bytes of frame in Buffer
+ *
+ * Return Value: 1 if able to store, 0 otherwise
+ */
+static int save_tx_buffer_request(struct mgsl_struct *info,const char *Buffer, unsigned int BufferSize)
+{
+ struct tx_holding_buffer *ptx;
+
+ if ( info->tx_holding_count >= info->num_tx_holding_buffers ) {
+ return 0; /* all buffers in use */
+ }
+
+ ptx = &info->tx_holding_buffers[info->put_tx_holding_index];
+ ptx->buffer_size = BufferSize;
+ memcpy( ptx->buffer, Buffer, BufferSize);
+
+ ++info->tx_holding_count;
+ if ( ++info->put_tx_holding_index >= info->num_tx_holding_buffers)
+ info->put_tx_holding_index=0;
+
+ return 1;
+}
+
+static int mgsl_claim_resources(struct mgsl_struct *info)
+{
+ if (request_region(info->io_base,info->io_addr_size,"synclink") == NULL) {
+ printk( "%s(%d):I/O address conflict on device %s Addr=%08X\n",
+ __FILE__,__LINE__,info->device_name, info->io_base);
+ return -ENODEV;
+ }
+ info->io_addr_requested = true;
+
+ if ( request_irq(info->irq_level,mgsl_interrupt,info->irq_flags,
+ info->device_name, info ) < 0 ) {
+ printk( "%s(%d):Cant request interrupt on device %s IRQ=%d\n",
+ __FILE__,__LINE__,info->device_name, info->irq_level );
+ goto errout;
+ }
+ info->irq_requested = true;
+
+ if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
+ if (request_mem_region(info->phys_memory_base,0x40000,"synclink") == NULL) {
+ printk( "%s(%d):mem addr conflict device %s Addr=%08X\n",
+ __FILE__,__LINE__,info->device_name, info->phys_memory_base);
+ goto errout;
+ }
+ info->shared_mem_requested = true;
+ if (request_mem_region(info->phys_lcr_base + info->lcr_offset,128,"synclink") == NULL) {
+ printk( "%s(%d):lcr mem addr conflict device %s Addr=%08X\n",
+ __FILE__,__LINE__,info->device_name, info->phys_lcr_base + info->lcr_offset);
+ goto errout;
+ }
+ info->lcr_mem_requested = true;
+
+ info->memory_base = ioremap_nocache(info->phys_memory_base,
+ 0x40000);
+ if (!info->memory_base) {
+ printk( "%s(%d):Cant map shared memory on device %s MemAddr=%08X\n",
+ __FILE__,__LINE__,info->device_name, info->phys_memory_base );
+ goto errout;
+ }
+
+ if ( !mgsl_memory_test(info) ) {
+ printk( "%s(%d):Failed shared memory test %s MemAddr=%08X\n",
+ __FILE__,__LINE__,info->device_name, info->phys_memory_base );
+ goto errout;
+ }
+
+ info->lcr_base = ioremap_nocache(info->phys_lcr_base,
+ PAGE_SIZE);
+ if (!info->lcr_base) {
+ printk( "%s(%d):Cant map LCR memory on device %s MemAddr=%08X\n",
+ __FILE__,__LINE__,info->device_name, info->phys_lcr_base );
+ goto errout;
+ }
+ info->lcr_base += info->lcr_offset;
+
+ } else {
+ /* claim DMA channel */
+
+ if (request_dma(info->dma_level,info->device_name) < 0){
+ printk( "%s(%d):Cant request DMA channel on device %s DMA=%d\n",
+ __FILE__,__LINE__,info->device_name, info->dma_level );
+ mgsl_release_resources( info );
+ return -ENODEV;
+ }
+ info->dma_requested = true;
+
+ /* ISA adapter uses bus master DMA */
+ set_dma_mode(info->dma_level,DMA_MODE_CASCADE);
+ enable_dma(info->dma_level);
+ }
+
+ if ( mgsl_allocate_dma_buffers(info) < 0 ) {
+ printk( "%s(%d):Cant allocate DMA buffers on device %s DMA=%d\n",
+ __FILE__,__LINE__,info->device_name, info->dma_level );
+ goto errout;
+ }
+
+ return 0;
+errout:
+ mgsl_release_resources(info);
+ return -ENODEV;
+
+} /* end of mgsl_claim_resources() */
+
+static void mgsl_release_resources(struct mgsl_struct *info)
+{
+ if ( debug_level >= DEBUG_LEVEL_INFO )
+ printk( "%s(%d):mgsl_release_resources(%s) entry\n",
+ __FILE__,__LINE__,info->device_name );
+
+ if ( info->irq_requested ) {
+ free_irq(info->irq_level, info);
+ info->irq_requested = false;
+ }
+ if ( info->dma_requested ) {
+ disable_dma(info->dma_level);
+ free_dma(info->dma_level);
+ info->dma_requested = false;
+ }
+ mgsl_free_dma_buffers(info);
+ mgsl_free_intermediate_rxbuffer_memory(info);
+ mgsl_free_intermediate_txbuffer_memory(info);
+
+ if ( info->io_addr_requested ) {
+ release_region(info->io_base,info->io_addr_size);
+ info->io_addr_requested = false;
+ }
+ if ( info->shared_mem_requested ) {
+ release_mem_region(info->phys_memory_base,0x40000);
+ info->shared_mem_requested = false;
+ }
+ if ( info->lcr_mem_requested ) {
+ release_mem_region(info->phys_lcr_base + info->lcr_offset,128);
+ info->lcr_mem_requested = false;
+ }
+ if (info->memory_base){
+ iounmap(info->memory_base);
+ info->memory_base = NULL;
+ }
+ if (info->lcr_base){
+ iounmap(info->lcr_base - info->lcr_offset);
+ info->lcr_base = NULL;
+ }
+
+ if ( debug_level >= DEBUG_LEVEL_INFO )
+ printk( "%s(%d):mgsl_release_resources(%s) exit\n",
+ __FILE__,__LINE__,info->device_name );
+
+} /* end of mgsl_release_resources() */
+
+/* mgsl_add_device()
+ *
+ * Add the specified device instance data structure to the
+ * global linked list of devices and increment the device count.
+ *
+ * Arguments: info pointer to device instance data
+ * Return Value: None
+ */
+static void mgsl_add_device( struct mgsl_struct *info )
+{
+ info->next_device = NULL;
+ info->line = mgsl_device_count;
+ sprintf(info->device_name,"ttySL%d",info->line);
+
+ if (info->line < MAX_TOTAL_DEVICES) {
+ if (maxframe[info->line])
+ info->max_frame_size = maxframe[info->line];
+
+ if (txdmabufs[info->line]) {
+ info->num_tx_dma_buffers = txdmabufs[info->line];
+ if (info->num_tx_dma_buffers < 1)
+ info->num_tx_dma_buffers = 1;
+ }
+
+ if (txholdbufs[info->line]) {
+ info->num_tx_holding_buffers = txholdbufs[info->line];
+ if (info->num_tx_holding_buffers < 1)
+ info->num_tx_holding_buffers = 1;
+ else if (info->num_tx_holding_buffers > MAX_TX_HOLDING_BUFFERS)
+ info->num_tx_holding_buffers = MAX_TX_HOLDING_BUFFERS;
+ }
+ }
+
+ mgsl_device_count++;
+
+ if ( !mgsl_device_list )
+ mgsl_device_list = info;
+ else {
+ struct mgsl_struct *current_dev = mgsl_device_list;
+ while( current_dev->next_device )
+ current_dev = current_dev->next_device;
+ current_dev->next_device = info;
+ }
+
+ if ( info->max_frame_size < 4096 )
+ info->max_frame_size = 4096;
+ else if ( info->max_frame_size > 65535 )
+ info->max_frame_size = 65535;
+
+ if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
+ printk( "SyncLink PCI v%d %s: IO=%04X IRQ=%d Mem=%08X,%08X MaxFrameSize=%u\n",
+ info->hw_version + 1, info->device_name, info->io_base, info->irq_level,
+ info->phys_memory_base, info->phys_lcr_base,
+ info->max_frame_size );
+ } else {
+ printk( "SyncLink ISA %s: IO=%04X IRQ=%d DMA=%d MaxFrameSize=%u\n",
+ info->device_name, info->io_base, info->irq_level, info->dma_level,
+ info->max_frame_size );
+ }
+
+#if SYNCLINK_GENERIC_HDLC
+ hdlcdev_init(info);
+#endif
+
+} /* end of mgsl_add_device() */
+
+static const struct tty_port_operations mgsl_port_ops = {
+ .carrier_raised = carrier_raised,
+ .dtr_rts = dtr_rts,
+};
+
+
+/* mgsl_allocate_device()
+ *
+ * Allocate and initialize a device instance structure
+ *
+ * Arguments: none
+ * Return Value: pointer to mgsl_struct if success, otherwise NULL
+ */
+static struct mgsl_struct* mgsl_allocate_device(void)
+{
+ struct mgsl_struct *info;
+
+ info = kzalloc(sizeof(struct mgsl_struct),
+ GFP_KERNEL);
+
+ if (!info) {
+ printk("Error can't allocate device instance data\n");
+ } else {
+ tty_port_init(&info->port);
+ info->port.ops = &mgsl_port_ops;
+ info->magic = MGSL_MAGIC;
+ INIT_WORK(&info->task, mgsl_bh_handler);
+ info->max_frame_size = 4096;
+ info->port.close_delay = 5*HZ/10;
+ info->port.closing_wait = 30*HZ;
+ init_waitqueue_head(&info->status_event_wait_q);
+ init_waitqueue_head(&info->event_wait_q);
+ spin_lock_init(&info->irq_spinlock);
+ spin_lock_init(&info->netlock);
+ memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS));
+ info->idle_mode = HDLC_TXIDLE_FLAGS;
+ info->num_tx_dma_buffers = 1;
+ info->num_tx_holding_buffers = 0;
+ }
+
+ return info;
+
+} /* end of mgsl_allocate_device()*/
+
+static const struct tty_operations mgsl_ops = {
+ .open = mgsl_open,
+ .close = mgsl_close,
+ .write = mgsl_write,
+ .put_char = mgsl_put_char,
+ .flush_chars = mgsl_flush_chars,
+ .write_room = mgsl_write_room,
+ .chars_in_buffer = mgsl_chars_in_buffer,
+ .flush_buffer = mgsl_flush_buffer,
+ .ioctl = mgsl_ioctl,
+ .throttle = mgsl_throttle,
+ .unthrottle = mgsl_unthrottle,
+ .send_xchar = mgsl_send_xchar,
+ .break_ctl = mgsl_break,
+ .wait_until_sent = mgsl_wait_until_sent,
+ .set_termios = mgsl_set_termios,
+ .stop = mgsl_stop,
+ .start = mgsl_start,
+ .hangup = mgsl_hangup,
+ .tiocmget = tiocmget,
+ .tiocmset = tiocmset,
+ .get_icount = msgl_get_icount,
+ .proc_fops = &mgsl_proc_fops,
+};
+
+/*
+ * perform tty device initialization
+ */
+static int mgsl_init_tty(void)
+{
+ int rc;
+
+ serial_driver = alloc_tty_driver(128);
+ if (!serial_driver)
+ return -ENOMEM;
+
+ serial_driver->owner = THIS_MODULE;
+ serial_driver->driver_name = "synclink";
+ serial_driver->name = "ttySL";
+ serial_driver->major = ttymajor;
+ serial_driver->minor_start = 64;
+ serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
+ serial_driver->subtype = SERIAL_TYPE_NORMAL;
+ serial_driver->init_termios = tty_std_termios;
+ serial_driver->init_termios.c_cflag =
+ B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+ serial_driver->init_termios.c_ispeed = 9600;
+ serial_driver->init_termios.c_ospeed = 9600;
+ serial_driver->flags = TTY_DRIVER_REAL_RAW;
+ tty_set_operations(serial_driver, &mgsl_ops);
+ if ((rc = tty_register_driver(serial_driver)) < 0) {
+ printk("%s(%d):Couldn't register serial driver\n",
+ __FILE__,__LINE__);
+ put_tty_driver(serial_driver);
+ serial_driver = NULL;
+ return rc;
+ }
+
+ printk("%s %s, tty major#%d\n",
+ driver_name, driver_version,
+ serial_driver->major);
+ return 0;
+}
+
+/* enumerate user specified ISA adapters
+ */
+static void mgsl_enum_isa_devices(void)
+{
+ struct mgsl_struct *info;
+ int i;
+
+ /* Check for user specified ISA devices */
+
+ for (i=0 ;(i < MAX_ISA_DEVICES) && io[i] && irq[i]; i++){
+ if ( debug_level >= DEBUG_LEVEL_INFO )
+ printk("ISA device specified io=%04X,irq=%d,dma=%d\n",
+ io[i], irq[i], dma[i] );
+
+ info = mgsl_allocate_device();
+ if ( !info ) {
+ /* error allocating device instance data */
+ if ( debug_level >= DEBUG_LEVEL_ERROR )
+ printk( "can't allocate device instance data.\n");
+ continue;
+ }
+
+ /* Copy user configuration info to device instance data */
+ info->io_base = (unsigned int)io[i];
+ info->irq_level = (unsigned int)irq[i];
+ info->irq_level = irq_canonicalize(info->irq_level);
+ info->dma_level = (unsigned int)dma[i];
+ info->bus_type = MGSL_BUS_TYPE_ISA;
+ info->io_addr_size = 16;
+ info->irq_flags = 0;
+
+ mgsl_add_device( info );
+ }
+}
+
+static void synclink_cleanup(void)
+{
+ int rc;
+ struct mgsl_struct *info;
+ struct mgsl_struct *tmp;
+
+ printk("Unloading %s: %s\n", driver_name, driver_version);
+
+ if (serial_driver) {
+ if ((rc = tty_unregister_driver(serial_driver)))
+ printk("%s(%d) failed to unregister tty driver err=%d\n",
+ __FILE__,__LINE__,rc);
+ put_tty_driver(serial_driver);
+ }
+
+ info = mgsl_device_list;
+ while(info) {
+#if SYNCLINK_GENERIC_HDLC
+ hdlcdev_exit(info);
+#endif
+ mgsl_release_resources(info);
+ tmp = info;
+ info = info->next_device;
+ kfree(tmp);
+ }
+
+ if (pci_registered)
+ pci_unregister_driver(&synclink_pci_driver);
+}
+
+static int __init synclink_init(void)
+{
+ int rc;
+
+ if (break_on_load) {
+ mgsl_get_text_ptr();
+ BREAKPOINT();
+ }
+
+ printk("%s %s\n", driver_name, driver_version);
+
+ mgsl_enum_isa_devices();
+ if ((rc = pci_register_driver(&synclink_pci_driver)) < 0)
+ printk("%s:failed to register PCI driver, error=%d\n",__FILE__,rc);
+ else
+ pci_registered = true;
+
+ if ((rc = mgsl_init_tty()) < 0)
+ goto error;
+
+ return 0;
+
+error:
+ synclink_cleanup();
+ return rc;
+}
+
+static void __exit synclink_exit(void)
+{
+ synclink_cleanup();
+}
+
+module_init(synclink_init);
+module_exit(synclink_exit);
+
+/*
+ * usc_RTCmd()
+ *
+ * Issue a USC Receive/Transmit command to the
+ * Channel Command/Address Register (CCAR).
+ *
+ * Notes:
+ *
+ * The command is encoded in the most significant 5 bits <15..11>
+ * of the CCAR value. Bits <10..7> of the CCAR must be preserved
+ * and Bits <6..0> must be written as zeros.
+ *
+ * Arguments:
+ *
+ * info pointer to device information structure
+ * Cmd command mask (use symbolic macros)
+ *
+ * Return Value:
+ *
+ * None
+ */
+static void usc_RTCmd( struct mgsl_struct *info, u16 Cmd )
+{
+ /* output command to CCAR in bits <15..11> */
+ /* preserve bits <10..7>, bits <6..0> must be zero */
+
+ outw( Cmd + info->loopback_bits, info->io_base + CCAR );
+
+ /* Read to flush write to CCAR */
+ if ( info->bus_type == MGSL_BUS_TYPE_PCI )
+ inw( info->io_base + CCAR );
+
+} /* end of usc_RTCmd() */
+
+/*
+ * usc_DmaCmd()
+ *
+ * Issue a DMA command to the DMA Command/Address Register (DCAR).
+ *
+ * Arguments:
+ *
+ * info pointer to device information structure
+ * Cmd DMA command mask (usc_DmaCmd_XX Macros)
+ *
+ * Return Value:
+ *
+ * None
+ */
+static void usc_DmaCmd( struct mgsl_struct *info, u16 Cmd )
+{
+ /* write command mask to DCAR */
+ outw( Cmd + info->mbre_bit, info->io_base );
+
+ /* Read to flush write to DCAR */
+ if ( info->bus_type == MGSL_BUS_TYPE_PCI )
+ inw( info->io_base );
+
+} /* end of usc_DmaCmd() */
+
+/*
+ * usc_OutDmaReg()
+ *
+ * Write a 16-bit value to a USC DMA register
+ *
+ * Arguments:
+ *
+ * info pointer to device info structure
+ * RegAddr register address (number) for write
+ * RegValue 16-bit value to write to register
+ *
+ * Return Value:
+ *
+ * None
+ *
+ */
+static void usc_OutDmaReg( struct mgsl_struct *info, u16 RegAddr, u16 RegValue )
+{
+ /* Note: The DCAR is located at the adapter base address */
+ /* Note: must preserve state of BIT8 in DCAR */
+
+ outw( RegAddr + info->mbre_bit, info->io_base );
+ outw( RegValue, info->io_base );
+
+ /* Read to flush write to DCAR */
+ if ( info->bus_type == MGSL_BUS_TYPE_PCI )
+ inw( info->io_base );
+
+} /* end of usc_OutDmaReg() */
+
+/*
+ * usc_InDmaReg()
+ *
+ * Read a 16-bit value from a DMA register
+ *
+ * Arguments:
+ *
+ * info pointer to device info structure
+ * RegAddr register address (number) to read from
+ *
+ * Return Value:
+ *
+ * The 16-bit value read from register
+ *
+ */
+static u16 usc_InDmaReg( struct mgsl_struct *info, u16 RegAddr )
+{
+ /* Note: The DCAR is located at the adapter base address */
+ /* Note: must preserve state of BIT8 in DCAR */
+
+ outw( RegAddr + info->mbre_bit, info->io_base );
+ return inw( info->io_base );
+
+} /* end of usc_InDmaReg() */
+
+/*
+ *
+ * usc_OutReg()
+ *
+ * Write a 16-bit value to a USC serial channel register
+ *
+ * Arguments:
+ *
+ * info pointer to device info structure
+ * RegAddr register address (number) to write to
+ * RegValue 16-bit value to write to register
+ *
+ * Return Value:
+ *
+ * None
+ *
+ */
+static void usc_OutReg( struct mgsl_struct *info, u16 RegAddr, u16 RegValue )
+{
+ outw( RegAddr + info->loopback_bits, info->io_base + CCAR );
+ outw( RegValue, info->io_base + CCAR );
+
+ /* Read to flush write to CCAR */
+ if ( info->bus_type == MGSL_BUS_TYPE_PCI )
+ inw( info->io_base + CCAR );
+
+} /* end of usc_OutReg() */
+
+/*
+ * usc_InReg()
+ *
+ * Reads a 16-bit value from a USC serial channel register
+ *
+ * Arguments:
+ *
+ * info pointer to device extension
+ * RegAddr register address (number) to read from
+ *
+ * Return Value:
+ *
+ * 16-bit value read from register
+ */
+static u16 usc_InReg( struct mgsl_struct *info, u16 RegAddr )
+{
+ outw( RegAddr + info->loopback_bits, info->io_base + CCAR );
+ return inw( info->io_base + CCAR );
+
+} /* end of usc_InReg() */
+
+/* usc_set_sdlc_mode()
+ *
+ * Set up the adapter for SDLC DMA communications.
+ *
+ * Arguments: info pointer to device instance data
+ * Return Value: NONE
+ */
+static void usc_set_sdlc_mode( struct mgsl_struct *info )
+{
+ u16 RegValue;
+ bool PreSL1660;
+
+ /*
+ * determine if the IUSC on the adapter is pre-SL1660. If
+ * not, take advantage of the UnderWait feature of more
+ * modern chips. If an underrun occurs and this bit is set,
+ * the transmitter will idle the programmed idle pattern
+ * until the driver has time to service the underrun. Otherwise,
+ * the dma controller may get the cycles previously requested
+ * and begin transmitting queued tx data.
+ */
+ usc_OutReg(info,TMCR,0x1f);
+ RegValue=usc_InReg(info,TMDR);
+ PreSL1660 = (RegValue == IUSC_PRE_SL1660);
+
+ if ( info->params.flags & HDLC_FLAG_HDLC_LOOPMODE )
+ {
+ /*
+ ** Channel Mode Register (CMR)
+ **
+ ** <15..14> 10 Tx Sub Modes, Send Flag on Underrun
+ ** <13> 0 0 = Transmit Disabled (initially)
+ ** <12> 0 1 = Consecutive Idles share common 0
+ ** <11..8> 1110 Transmitter Mode = HDLC/SDLC Loop
+ ** <7..4> 0000 Rx Sub Modes, addr/ctrl field handling
+ ** <3..0> 0110 Receiver Mode = HDLC/SDLC
+ **
+ ** 1000 1110 0000 0110 = 0x8e06
+ */
+ RegValue = 0x8e06;
+
+ /*--------------------------------------------------
+ * ignore user options for UnderRun Actions and
+ * preambles
+ *--------------------------------------------------*/
+ }
+ else
+ {
+ /* Channel mode Register (CMR)
+ *
+ * <15..14> 00 Tx Sub modes, Underrun Action
+ * <13> 0 1 = Send Preamble before opening flag
+ * <12> 0 1 = Consecutive Idles share common 0
+ * <11..8> 0110 Transmitter mode = HDLC/SDLC
+ * <7..4> 0000 Rx Sub modes, addr/ctrl field handling
+ * <3..0> 0110 Receiver mode = HDLC/SDLC
+ *
+ * 0000 0110 0000 0110 = 0x0606
+ */
+ if (info->params.mode == MGSL_MODE_RAW) {
+ RegValue = 0x0001; /* Set Receive mode = external sync */
+
+ usc_OutReg( info, IOCR, /* Set IOCR DCD is RxSync Detect Input */
+ (unsigned short)((usc_InReg(info, IOCR) & ~(BIT13|BIT12)) | BIT12));
+
+ /*
+ * TxSubMode:
+ * CMR <15> 0 Don't send CRC on Tx Underrun
+ * CMR <14> x undefined
+ * CMR <13> 0 Send preamble before openning sync
+ * CMR <12> 0 Send 8-bit syncs, 1=send Syncs per TxLength
+ *
+ * TxMode:
+ * CMR <11-8) 0100 MonoSync
+ *
+ * 0x00 0100 xxxx xxxx 04xx
+ */
+ RegValue |= 0x0400;
+ }
+ else {
+
+ RegValue = 0x0606;
+
+ if ( info->params.flags & HDLC_FLAG_UNDERRUN_ABORT15 )
+ RegValue |= BIT14;
+ else if ( info->params.flags & HDLC_FLAG_UNDERRUN_FLAG )
+ RegValue |= BIT15;
+ else if ( info->params.flags & HDLC_FLAG_UNDERRUN_CRC )
+ RegValue |= BIT15 + BIT14;
+ }
+
+ if ( info->params.preamble != HDLC_PREAMBLE_PATTERN_NONE )
+ RegValue |= BIT13;
+ }
+
+ if ( info->params.mode == MGSL_MODE_HDLC &&
+ (info->params.flags & HDLC_FLAG_SHARE_ZERO) )
+ RegValue |= BIT12;
+
+ if ( info->params.addr_filter != 0xff )
+ {
+ /* set up receive address filtering */
+ usc_OutReg( info, RSR, info->params.addr_filter );
+ RegValue |= BIT4;
+ }
+
+ usc_OutReg( info, CMR, RegValue );
+ info->cmr_value = RegValue;
+
+ /* Receiver mode Register (RMR)
+ *
+ * <15..13> 000 encoding
+ * <12..11> 00 FCS = 16bit CRC CCITT (x15 + x12 + x5 + 1)
+ * <10> 1 1 = Set CRC to all 1s (use for SDLC/HDLC)
+ * <9> 0 1 = Include Receive chars in CRC
+ * <8> 1 1 = Use Abort/PE bit as abort indicator
+ * <7..6> 00 Even parity
+ * <5> 0 parity disabled
+ * <4..2> 000 Receive Char Length = 8 bits
+ * <1..0> 00 Disable Receiver
+ *
+ * 0000 0101 0000 0000 = 0x0500
+ */
+
+ RegValue = 0x0500;
+
+ switch ( info->params.encoding ) {
+ case HDLC_ENCODING_NRZB: RegValue |= BIT13; break;
+ case HDLC_ENCODING_NRZI_MARK: RegValue |= BIT14; break;
+ case HDLC_ENCODING_NRZI_SPACE: RegValue |= BIT14 + BIT13; break;
+ case HDLC_ENCODING_BIPHASE_MARK: RegValue |= BIT15; break;
+ case HDLC_ENCODING_BIPHASE_SPACE: RegValue |= BIT15 + BIT13; break;
+ case HDLC_ENCODING_BIPHASE_LEVEL: RegValue |= BIT15 + BIT14; break;
+ case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: RegValue |= BIT15 + BIT14 + BIT13; break;
+ }
+
+ if ( (info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_16_CCITT )
+ RegValue |= BIT9;
+ else if ( (info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_32_CCITT )
+ RegValue |= ( BIT12 | BIT10 | BIT9 );
+
+ usc_OutReg( info, RMR, RegValue );
+
+ /* Set the Receive count Limit Register (RCLR) to 0xffff. */
+ /* When an opening flag of an SDLC frame is recognized the */
+ /* Receive Character count (RCC) is loaded with the value in */
+ /* RCLR. The RCC is decremented for each received byte. The */
+ /* value of RCC is stored after the closing flag of the frame */
+ /* allowing the frame size to be computed. */
+
+ usc_OutReg( info, RCLR, RCLRVALUE );
+
+ usc_RCmd( info, RCmd_SelectRicrdma_level );
+
+ /* Receive Interrupt Control Register (RICR)
+ *
+ * <15..8> ? RxFIFO DMA Request Level
+ * <7> 0 Exited Hunt IA (Interrupt Arm)
+ * <6> 0 Idle Received IA
+ * <5> 0 Break/Abort IA
+ * <4> 0 Rx Bound IA
+ * <3> 1 Queued status reflects oldest 2 bytes in FIFO
+ * <2> 0 Abort/PE IA
+ * <1> 1 Rx Overrun IA
+ * <0> 0 Select TC0 value for readback
+ *
+ * 0000 0000 0000 1000 = 0x000a
+ */
+
+ /* Carry over the Exit Hunt and Idle Received bits */
+ /* in case they have been armed by usc_ArmEvents. */
+
+ RegValue = usc_InReg( info, RICR ) & 0xc0;
+
+ if ( info->bus_type == MGSL_BUS_TYPE_PCI )
+ usc_OutReg( info, RICR, (u16)(0x030a | RegValue) );
+ else
+ usc_OutReg( info, RICR, (u16)(0x140a | RegValue) );
+
+ /* Unlatch all Rx status bits and clear Rx status IRQ Pending */
+
+ usc_UnlatchRxstatusBits( info, RXSTATUS_ALL );
+ usc_ClearIrqPendingBits( info, RECEIVE_STATUS );
+
+ /* Transmit mode Register (TMR)
+ *
+ * <15..13> 000 encoding
+ * <12..11> 00 FCS = 16bit CRC CCITT (x15 + x12 + x5 + 1)
+ * <10> 1 1 = Start CRC as all 1s (use for SDLC/HDLC)
+ * <9> 0 1 = Tx CRC Enabled
+ * <8> 0 1 = Append CRC to end of transmit frame
+ * <7..6> 00 Transmit parity Even
+ * <5> 0 Transmit parity Disabled
+ * <4..2> 000 Tx Char Length = 8 bits
+ * <1..0> 00 Disable Transmitter
+ *
+ * 0000 0100 0000 0000 = 0x0400
+ */
+
+ RegValue = 0x0400;
+
+ switch ( info->params.encoding ) {
+ case HDLC_ENCODING_NRZB: RegValue |= BIT13; break;
+ case HDLC_ENCODING_NRZI_MARK: RegValue |= BIT14; break;
+ case HDLC_ENCODING_NRZI_SPACE: RegValue |= BIT14 + BIT13; break;
+ case HDLC_ENCODING_BIPHASE_MARK: RegValue |= BIT15; break;
+ case HDLC_ENCODING_BIPHASE_SPACE: RegValue |= BIT15 + BIT13; break;
+ case HDLC_ENCODING_BIPHASE_LEVEL: RegValue |= BIT15 + BIT14; break;
+ case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: RegValue |= BIT15 + BIT14 + BIT13; break;
+ }
+
+ if ( (info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_16_CCITT )
+ RegValue |= BIT9 + BIT8;
+ else if ( (info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_32_CCITT )
+ RegValue |= ( BIT12 | BIT10 | BIT9 | BIT8);
+
+ usc_OutReg( info, TMR, RegValue );
+
+ usc_set_txidle( info );
+
+
+ usc_TCmd( info, TCmd_SelectTicrdma_level );
+
+ /* Transmit Interrupt Control Register (TICR)
+ *
+ * <15..8> ? Transmit FIFO DMA Level
+ * <7> 0 Present IA (Interrupt Arm)
+ * <6> 0 Idle Sent IA
+ * <5> 1 Abort Sent IA
+ * <4> 1 EOF/EOM Sent IA
+ * <3> 0 CRC Sent IA
+ * <2> 1 1 = Wait for SW Trigger to Start Frame
+ * <1> 1 Tx Underrun IA
+ * <0> 0 TC0 constant on read back
+ *
+ * 0000 0000 0011 0110 = 0x0036
+ */
+
+ if ( info->bus_type == MGSL_BUS_TYPE_PCI )
+ usc_OutReg( info, TICR, 0x0736 );
+ else
+ usc_OutReg( info, TICR, 0x1436 );
+
+ usc_UnlatchTxstatusBits( info, TXSTATUS_ALL );
+ usc_ClearIrqPendingBits( info, TRANSMIT_STATUS );
+
+ /*
+ ** Transmit Command/Status Register (TCSR)
+ **
+ ** <15..12> 0000 TCmd
+ ** <11> 0/1 UnderWait
+ ** <10..08> 000 TxIdle
+ ** <7> x PreSent
+ ** <6> x IdleSent
+ ** <5> x AbortSent
+ ** <4> x EOF/EOM Sent
+ ** <3> x CRC Sent
+ ** <2> x All Sent
+ ** <1> x TxUnder
+ ** <0> x TxEmpty
+ **
+ ** 0000 0000 0000 0000 = 0x0000
+ */
+ info->tcsr_value = 0;
+
+ if ( !PreSL1660 )
+ info->tcsr_value |= TCSR_UNDERWAIT;
+
+ usc_OutReg( info, TCSR, info->tcsr_value );
+
+ /* Clock mode Control Register (CMCR)
+ *
+ * <15..14> 00 counter 1 Source = Disabled
+ * <13..12> 00 counter 0 Source = Disabled
+ * <11..10> 11 BRG1 Input is TxC Pin
+ * <9..8> 11 BRG0 Input is TxC Pin
+ * <7..6> 01 DPLL Input is BRG1 Output
+ * <5..3> XXX TxCLK comes from Port 0
+ * <2..0> XXX RxCLK comes from Port 1
+ *
+ * 0000 1111 0111 0111 = 0x0f77
+ */
+
+ RegValue = 0x0f40;
+
+ if ( info->params.flags & HDLC_FLAG_RXC_DPLL )
+ RegValue |= 0x0003; /* RxCLK from DPLL */
+ else if ( info->params.flags & HDLC_FLAG_RXC_BRG )
+ RegValue |= 0x0004; /* RxCLK from BRG0 */
+ else if ( info->params.flags & HDLC_FLAG_RXC_TXCPIN)
+ RegValue |= 0x0006; /* RxCLK from TXC Input */
+ else
+ RegValue |= 0x0007; /* RxCLK from Port1 */
+
+ if ( info->params.flags & HDLC_FLAG_TXC_DPLL )
+ RegValue |= 0x0018; /* TxCLK from DPLL */
+ else if ( info->params.flags & HDLC_FLAG_TXC_BRG )
+ RegValue |= 0x0020; /* TxCLK from BRG0 */
+ else if ( info->params.flags & HDLC_FLAG_TXC_RXCPIN)
+ RegValue |= 0x0038; /* RxCLK from TXC Input */
+ else
+ RegValue |= 0x0030; /* TxCLK from Port0 */
+
+ usc_OutReg( info, CMCR, RegValue );
+
+
+ /* Hardware Configuration Register (HCR)
+ *
+ * <15..14> 00 CTR0 Divisor:00=32,01=16,10=8,11=4
+ * <13> 0 CTR1DSel:0=CTR0Div determines CTR0Div
+ * <12> 0 CVOK:0=report code violation in biphase
+ * <11..10> 00 DPLL Divisor:00=32,01=16,10=8,11=4
+ * <9..8> XX DPLL mode:00=disable,01=NRZ,10=Biphase,11=Biphase Level
+ * <7..6> 00 reserved
+ * <5> 0 BRG1 mode:0=continuous,1=single cycle
+ * <4> X BRG1 Enable
+ * <3..2> 00 reserved
+ * <1> 0 BRG0 mode:0=continuous,1=single cycle
+ * <0> 0 BRG0 Enable
+ */
+
+ RegValue = 0x0000;
+
+ if ( info->params.flags & (HDLC_FLAG_RXC_DPLL + HDLC_FLAG_TXC_DPLL) ) {
+ u32 XtalSpeed;
+ u32 DpllDivisor;
+ u16 Tc;
+
+ /* DPLL is enabled. Use BRG1 to provide continuous reference clock */
+ /* for DPLL. DPLL mode in HCR is dependent on the encoding used. */
+
+ if ( info->bus_type == MGSL_BUS_TYPE_PCI )
+ XtalSpeed = 11059200;
+ else
+ XtalSpeed = 14745600;
+
+ if ( info->params.flags & HDLC_FLAG_DPLL_DIV16 ) {
+ DpllDivisor = 16;
+ RegValue |= BIT10;
+ }
+ else if ( info->params.flags & HDLC_FLAG_DPLL_DIV8 ) {
+ DpllDivisor = 8;
+ RegValue |= BIT11;
+ }
+ else
+ DpllDivisor = 32;
+
+ /* Tc = (Xtal/Speed) - 1 */
+ /* If twice the remainder of (Xtal/Speed) is greater than Speed */
+ /* then rounding up gives a more precise time constant. Instead */
+ /* of rounding up and then subtracting 1 we just don't subtract */
+ /* the one in this case. */
+
+ /*--------------------------------------------------
+ * ejz: for DPLL mode, application should use the
+ * same clock speed as the partner system, even
+ * though clocking is derived from the input RxData.
+ * In case the user uses a 0 for the clock speed,
+ * default to 0xffffffff and don't try to divide by
+ * zero
+ *--------------------------------------------------*/
+ if ( info->params.clock_speed )
+ {
+ Tc = (u16)((XtalSpeed/DpllDivisor)/info->params.clock_speed);
+ if ( !((((XtalSpeed/DpllDivisor) % info->params.clock_speed) * 2)
+ / info->params.clock_speed) )
+ Tc--;
+ }
+ else
+ Tc = -1;
+
+
+ /* Write 16-bit Time Constant for BRG1 */
+ usc_OutReg( info, TC1R, Tc );
+
+ RegValue |= BIT4; /* enable BRG1 */
+
+ switch ( info->params.encoding ) {
+ case HDLC_ENCODING_NRZ:
+ case HDLC_ENCODING_NRZB:
+ case HDLC_ENCODING_NRZI_MARK:
+ case HDLC_ENCODING_NRZI_SPACE: RegValue |= BIT8; break;
+ case HDLC_ENCODING_BIPHASE_MARK:
+ case HDLC_ENCODING_BIPHASE_SPACE: RegValue |= BIT9; break;
+ case HDLC_ENCODING_BIPHASE_LEVEL:
+ case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: RegValue |= BIT9 + BIT8; break;
+ }
+ }
+
+ usc_OutReg( info, HCR, RegValue );
+
+
+ /* Channel Control/status Register (CCSR)
+ *
+ * <15> X RCC FIFO Overflow status (RO)
+ * <14> X RCC FIFO Not Empty status (RO)
+ * <13> 0 1 = Clear RCC FIFO (WO)
+ * <12> X DPLL Sync (RW)
+ * <11> X DPLL 2 Missed Clocks status (RO)
+ * <10> X DPLL 1 Missed Clock status (RO)
+ * <9..8> 00 DPLL Resync on rising and falling edges (RW)
+ * <7> X SDLC Loop On status (RO)
+ * <6> X SDLC Loop Send status (RO)
+ * <5> 1 Bypass counters for TxClk and RxClk (RW)
+ * <4..2> 000 Last Char of SDLC frame has 8 bits (RW)
+ * <1..0> 00 reserved
+ *
+ * 0000 0000 0010 0000 = 0x0020
+ */
+
+ usc_OutReg( info, CCSR, 0x1020 );
+
+
+ if ( info->params.flags & HDLC_FLAG_AUTO_CTS ) {
+ usc_OutReg( info, SICR,
+ (u16)(usc_InReg(info,SICR) | SICR_CTS_INACTIVE) );
+ }
+
+
+ /* enable Master Interrupt Enable bit (MIE) */
+ usc_EnableMasterIrqBit( info );
+
+ usc_ClearIrqPendingBits( info, RECEIVE_STATUS + RECEIVE_DATA +
+ TRANSMIT_STATUS + TRANSMIT_DATA + MISC);
+
+ /* arm RCC underflow interrupt */
+ usc_OutReg(info, SICR, (u16)(usc_InReg(info,SICR) | BIT3));
+ usc_EnableInterrupts(info, MISC);
+
+ info->mbre_bit = 0;
+ outw( 0, info->io_base ); /* clear Master Bus Enable (DCAR) */
+ usc_DmaCmd( info, DmaCmd_ResetAllChannels ); /* disable both DMA channels */
+ info->mbre_bit = BIT8;
+ outw( BIT8, info->io_base ); /* set Master Bus Enable (DCAR) */
+
+ if (info->bus_type == MGSL_BUS_TYPE_ISA) {
+ /* Enable DMAEN (Port 7, Bit 14) */
+ /* This connects the DMA request signal to the ISA bus */
+ usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT15) & ~BIT14));
+ }
+
+ /* DMA Control Register (DCR)
+ *
+ * <15..14> 10 Priority mode = Alternating Tx/Rx
+ * 01 Rx has priority
+ * 00 Tx has priority
+ *
+ * <13> 1 Enable Priority Preempt per DCR<15..14>
+ * (WARNING DCR<11..10> must be 00 when this is 1)
+ * 0 Choose activate channel per DCR<11..10>
+ *
+ * <12> 0 Little Endian for Array/List
+ * <11..10> 00 Both Channels can use each bus grant
+ * <9..6> 0000 reserved
+ * <5> 0 7 CLK - Minimum Bus Re-request Interval
+ * <4> 0 1 = drive D/C and S/D pins
+ * <3> 1 1 = Add one wait state to all DMA cycles.
+ * <2> 0 1 = Strobe /UAS on every transfer.
+ * <1..0> 11 Addr incrementing only affects LS24 bits
+ *
+ * 0110 0000 0000 1011 = 0x600b
+ */
+
+ if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
+ /* PCI adapter does not need DMA wait state */
+ usc_OutDmaReg( info, DCR, 0xa00b );
+ }
+ else
+ usc_OutDmaReg( info, DCR, 0x800b );
+
+
+ /* Receive DMA mode Register (RDMR)
+ *
+ * <15..14> 11 DMA mode = Linked List Buffer mode
+ * <13> 1 RSBinA/L = store Rx status Block in Arrary/List entry
+ * <12> 1 Clear count of List Entry after fetching
+ * <11..10> 00 Address mode = Increment
+ * <9> 1 Terminate Buffer on RxBound
+ * <8> 0 Bus Width = 16bits
+ * <7..0> ? status Bits (write as 0s)
+ *
+ * 1111 0010 0000 0000 = 0xf200
+ */
+
+ usc_OutDmaReg( info, RDMR, 0xf200 );
+
+
+ /* Transmit DMA mode Register (TDMR)
+ *
+ * <15..14> 11 DMA mode = Linked List Buffer mode
+ * <13> 1 TCBinA/L = fetch Tx Control Block from List entry
+ * <12> 1 Clear count of List Entry after fetching
+ * <11..10> 00 Address mode = Increment
+ * <9> 1 Terminate Buffer on end of frame
+ * <8> 0 Bus Width = 16bits
+ * <7..0> ? status Bits (Read Only so write as 0)
+ *
+ * 1111 0010 0000 0000 = 0xf200
+ */
+
+ usc_OutDmaReg( info, TDMR, 0xf200 );
+
+
+ /* DMA Interrupt Control Register (DICR)
+ *
+ * <15> 1 DMA Interrupt Enable
+ * <14> 0 1 = Disable IEO from USC
+ * <13> 0 1 = Don't provide vector during IntAck
+ * <12> 1 1 = Include status in Vector
+ * <10..2> 0 reserved, Must be 0s
+ * <1> 0 1 = Rx DMA Interrupt Enabled
+ * <0> 0 1 = Tx DMA Interrupt Enabled
+ *
+ * 1001 0000 0000 0000 = 0x9000
+ */
+
+ usc_OutDmaReg( info, DICR, 0x9000 );
+
+ usc_InDmaReg( info, RDMR ); /* clear pending receive DMA IRQ bits */
+ usc_InDmaReg( info, TDMR ); /* clear pending transmit DMA IRQ bits */
+ usc_OutDmaReg( info, CDIR, 0x0303 ); /* clear IUS and Pending for Tx and Rx */
+
+ /* Channel Control Register (CCR)
+ *
+ * <15..14> 10 Use 32-bit Tx Control Blocks (TCBs)
+ * <13> 0 Trigger Tx on SW Command Disabled
+ * <12> 0 Flag Preamble Disabled
+ * <11..10> 00 Preamble Length
+ * <9..8> 00 Preamble Pattern
+ * <7..6> 10 Use 32-bit Rx status Blocks (RSBs)
+ * <5> 0 Trigger Rx on SW Command Disabled
+ * <4..0> 0 reserved
+ *
+ * 1000 0000 1000 0000 = 0x8080
+ */
+
+ RegValue = 0x8080;
+
+ switch ( info->params.preamble_length ) {
+ case HDLC_PREAMBLE_LENGTH_16BITS: RegValue |= BIT10; break;
+ case HDLC_PREAMBLE_LENGTH_32BITS: RegValue |= BIT11; break;
+ case HDLC_PREAMBLE_LENGTH_64BITS: RegValue |= BIT11 + BIT10; break;
+ }
+
+ switch ( info->params.preamble ) {
+ case HDLC_PREAMBLE_PATTERN_FLAGS: RegValue |= BIT8 + BIT12; break;
+ case HDLC_PREAMBLE_PATTERN_ONES: RegValue |= BIT8; break;
+ case HDLC_PREAMBLE_PATTERN_10: RegValue |= BIT9; break;
+ case HDLC_PREAMBLE_PATTERN_01: RegValue |= BIT9 + BIT8; break;
+ }
+
+ usc_OutReg( info, CCR, RegValue );
+
+
+ /*
+ * Burst/Dwell Control Register
+ *
+ * <15..8> 0x20 Maximum number of transfers per bus grant
+ * <7..0> 0x00 Maximum number of clock cycles per bus grant
+ */
+
+ if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
+ /* don't limit bus occupancy on PCI adapter */
+ usc_OutDmaReg( info, BDCR, 0x0000 );
+ }
+ else
+ usc_OutDmaReg( info, BDCR, 0x2000 );
+
+ usc_stop_transmitter(info);
+ usc_stop_receiver(info);
+
+} /* end of usc_set_sdlc_mode() */
+
+/* usc_enable_loopback()
+ *
+ * Set the 16C32 for internal loopback mode.
+ * The TxCLK and RxCLK signals are generated from the BRG0 and
+ * the TxD is looped back to the RxD internally.
+ *
+ * Arguments: info pointer to device instance data
+ * enable 1 = enable loopback, 0 = disable
+ * Return Value: None
+ */
+static void usc_enable_loopback(struct mgsl_struct *info, int enable)
+{
+ if (enable) {
+ /* blank external TXD output */
+ usc_OutReg(info,IOCR,usc_InReg(info,IOCR) | (BIT7+BIT6));
+
+ /* Clock mode Control Register (CMCR)
+ *
+ * <15..14> 00 counter 1 Disabled
+ * <13..12> 00 counter 0 Disabled
+ * <11..10> 11 BRG1 Input is TxC Pin
+ * <9..8> 11 BRG0 Input is TxC Pin
+ * <7..6> 01 DPLL Input is BRG1 Output
+ * <5..3> 100 TxCLK comes from BRG0
+ * <2..0> 100 RxCLK comes from BRG0
+ *
+ * 0000 1111 0110 0100 = 0x0f64
+ */
+
+ usc_OutReg( info, CMCR, 0x0f64 );
+
+ /* Write 16-bit Time Constant for BRG0 */
+ /* use clock speed if available, otherwise use 8 for diagnostics */
+ if (info->params.clock_speed) {
+ if (info->bus_type == MGSL_BUS_TYPE_PCI)
+ usc_OutReg(info, TC0R, (u16)((11059200/info->params.clock_speed)-1));
+ else
+ usc_OutReg(info, TC0R, (u16)((14745600/info->params.clock_speed)-1));
+ } else
+ usc_OutReg(info, TC0R, (u16)8);
+
+ /* Hardware Configuration Register (HCR) Clear Bit 1, BRG0
+ mode = Continuous Set Bit 0 to enable BRG0. */
+ usc_OutReg( info, HCR, (u16)((usc_InReg( info, HCR ) & ~BIT1) | BIT0) );
+
+ /* Input/Output Control Reg, <2..0> = 100, Drive RxC pin with BRG0 */
+ usc_OutReg(info, IOCR, (u16)((usc_InReg(info, IOCR) & 0xfff8) | 0x0004));
+
+ /* set Internal Data loopback mode */
+ info->loopback_bits = 0x300;
+ outw( 0x0300, info->io_base + CCAR );
+ } else {
+ /* enable external TXD output */
+ usc_OutReg(info,IOCR,usc_InReg(info,IOCR) & ~(BIT7+BIT6));
+
+ /* clear Internal Data loopback mode */
+ info->loopback_bits = 0;
+ outw( 0,info->io_base + CCAR );
+ }
+
+} /* end of usc_enable_loopback() */
+
+/* usc_enable_aux_clock()
+ *
+ * Enabled the AUX clock output at the specified frequency.
+ *
+ * Arguments:
+ *
+ * info pointer to device extension
+ * data_rate data rate of clock in bits per second
+ * A data rate of 0 disables the AUX clock.
+ *
+ * Return Value: None
+ */
+static void usc_enable_aux_clock( struct mgsl_struct *info, u32 data_rate )
+{
+ u32 XtalSpeed;
+ u16 Tc;
+
+ if ( data_rate ) {
+ if ( info->bus_type == MGSL_BUS_TYPE_PCI )
+ XtalSpeed = 11059200;
+ else
+ XtalSpeed = 14745600;
+
+
+ /* Tc = (Xtal/Speed) - 1 */
+ /* If twice the remainder of (Xtal/Speed) is greater than Speed */
+ /* then rounding up gives a more precise time constant. Instead */
+ /* of rounding up and then subtracting 1 we just don't subtract */
+ /* the one in this case. */
+
+
+ Tc = (u16)(XtalSpeed/data_rate);
+ if ( !(((XtalSpeed % data_rate) * 2) / data_rate) )
+ Tc--;
+
+ /* Write 16-bit Time Constant for BRG0 */
+ usc_OutReg( info, TC0R, Tc );
+
+ /*
+ * Hardware Configuration Register (HCR)
+ * Clear Bit 1, BRG0 mode = Continuous
+ * Set Bit 0 to enable BRG0.
+ */
+
+ usc_OutReg( info, HCR, (u16)((usc_InReg( info, HCR ) & ~BIT1) | BIT0) );
+
+ /* Input/Output Control Reg, <2..0> = 100, Drive RxC pin with BRG0 */
+ usc_OutReg( info, IOCR, (u16)((usc_InReg(info, IOCR) & 0xfff8) | 0x0004) );
+ } else {
+ /* data rate == 0 so turn off BRG0 */
+ usc_OutReg( info, HCR, (u16)(usc_InReg( info, HCR ) & ~BIT0) );
+ }
+
+} /* end of usc_enable_aux_clock() */
+
+/*
+ *
+ * usc_process_rxoverrun_sync()
+ *
+ * This function processes a receive overrun by resetting the
+ * receive DMA buffers and issuing a Purge Rx FIFO command
+ * to allow the receiver to continue receiving.
+ *
+ * Arguments:
+ *
+ * info pointer to device extension
+ *
+ * Return Value: None
+ */
+static void usc_process_rxoverrun_sync( struct mgsl_struct *info )
+{
+ int start_index;
+ int end_index;
+ int frame_start_index;
+ bool start_of_frame_found = false;
+ bool end_of_frame_found = false;
+ bool reprogram_dma = false;
+
+ DMABUFFERENTRY *buffer_list = info->rx_buffer_list;
+ u32 phys_addr;
+
+ usc_DmaCmd( info, DmaCmd_PauseRxChannel );
+ usc_RCmd( info, RCmd_EnterHuntmode );
+ usc_RTCmd( info, RTCmd_PurgeRxFifo );
+
+ /* CurrentRxBuffer points to the 1st buffer of the next */
+ /* possibly available receive frame. */
+
+ frame_start_index = start_index = end_index = info->current_rx_buffer;
+
+ /* Search for an unfinished string of buffers. This means */
+ /* that a receive frame started (at least one buffer with */
+ /* count set to zero) but there is no terminiting buffer */
+ /* (status set to non-zero). */
+
+ while( !buffer_list[end_index].count )
+ {
+ /* Count field has been reset to zero by 16C32. */
+ /* This buffer is currently in use. */
+
+ if ( !start_of_frame_found )
+ {
+ start_of_frame_found = true;
+ frame_start_index = end_index;
+ end_of_frame_found = false;
+ }
+
+ if ( buffer_list[end_index].status )
+ {
+ /* Status field has been set by 16C32. */
+ /* This is the last buffer of a received frame. */
+
+ /* We want to leave the buffers for this frame intact. */
+ /* Move on to next possible frame. */
+
+ start_of_frame_found = false;
+ end_of_frame_found = true;
+ }
+
+ /* advance to next buffer entry in linked list */
+ end_index++;
+ if ( end_index == info->rx_buffer_count )
+ end_index = 0;
+
+ if ( start_index == end_index )
+ {
+ /* The entire list has been searched with all Counts == 0 and */
+ /* all Status == 0. The receive buffers are */
+ /* completely screwed, reset all receive buffers! */
+ mgsl_reset_rx_dma_buffers( info );
+ frame_start_index = 0;
+ start_of_frame_found = false;
+ reprogram_dma = true;
+ break;
+ }
+ }
+
+ if ( start_of_frame_found && !end_of_frame_found )
+ {
+ /* There is an unfinished string of receive DMA buffers */
+ /* as a result of the receiver overrun. */
+
+ /* Reset the buffers for the unfinished frame */
+ /* and reprogram the receive DMA controller to start */
+ /* at the 1st buffer of unfinished frame. */
+
+ start_index = frame_start_index;
+
+ do
+ {
+ *((unsigned long *)&(info->rx_buffer_list[start_index++].count)) = DMABUFFERSIZE;
+
+ /* Adjust index for wrap around. */
+ if ( start_index == info->rx_buffer_count )
+ start_index = 0;
+
+ } while( start_index != end_index );
+
+ reprogram_dma = true;
+ }
+
+ if ( reprogram_dma )
+ {
+ usc_UnlatchRxstatusBits(info,RXSTATUS_ALL);
+ usc_ClearIrqPendingBits(info, RECEIVE_DATA|RECEIVE_STATUS);
+ usc_UnlatchRxstatusBits(info, RECEIVE_DATA|RECEIVE_STATUS);
+
+ usc_EnableReceiver(info,DISABLE_UNCONDITIONAL);
+
+ /* This empties the receive FIFO and loads the RCC with RCLR */
+ usc_OutReg( info, CCSR, (u16)(usc_InReg(info,CCSR) | BIT13) );
+
+ /* program 16C32 with physical address of 1st DMA buffer entry */
+ phys_addr = info->rx_buffer_list[frame_start_index].phys_entry;
+ usc_OutDmaReg( info, NRARL, (u16)phys_addr );
+ usc_OutDmaReg( info, NRARU, (u16)(phys_addr >> 16) );
+
+ usc_UnlatchRxstatusBits( info, RXSTATUS_ALL );
+ usc_ClearIrqPendingBits( info, RECEIVE_DATA + RECEIVE_STATUS );
+ usc_EnableInterrupts( info, RECEIVE_STATUS );
+
+ /* 1. Arm End of Buffer (EOB) Receive DMA Interrupt (BIT2 of RDIAR) */
+ /* 2. Enable Receive DMA Interrupts (BIT1 of DICR) */
+
+ usc_OutDmaReg( info, RDIAR, BIT3 + BIT2 );
+ usc_OutDmaReg( info, DICR, (u16)(usc_InDmaReg(info,DICR) | BIT1) );
+ usc_DmaCmd( info, DmaCmd_InitRxChannel );
+ if ( info->params.flags & HDLC_FLAG_AUTO_DCD )
+ usc_EnableReceiver(info,ENABLE_AUTO_DCD);
+ else
+ usc_EnableReceiver(info,ENABLE_UNCONDITIONAL);
+ }
+ else
+ {
+ /* This empties the receive FIFO and loads the RCC with RCLR */
+ usc_OutReg( info, CCSR, (u16)(usc_InReg(info,CCSR) | BIT13) );
+ usc_RTCmd( info, RTCmd_PurgeRxFifo );
+ }
+
+} /* end of usc_process_rxoverrun_sync() */
+
+/* usc_stop_receiver()
+ *
+ * Disable USC receiver
+ *
+ * Arguments: info pointer to device instance data
+ * Return Value: None
+ */
+static void usc_stop_receiver( struct mgsl_struct *info )
+{
+ if (debug_level >= DEBUG_LEVEL_ISR)
+ printk("%s(%d):usc_stop_receiver(%s)\n",
+ __FILE__,__LINE__, info->device_name );
+
+ /* Disable receive DMA channel. */
+ /* This also disables receive DMA channel interrupts */
+ usc_DmaCmd( info, DmaCmd_ResetRxChannel );
+
+ usc_UnlatchRxstatusBits( info, RXSTATUS_ALL );
+ usc_ClearIrqPendingBits( info, RECEIVE_DATA + RECEIVE_STATUS );
+ usc_DisableInterrupts( info, RECEIVE_DATA + RECEIVE_STATUS );
+
+ usc_EnableReceiver(info,DISABLE_UNCONDITIONAL);
+
+ /* This empties the receive FIFO and loads the RCC with RCLR */
+ usc_OutReg( info, CCSR, (u16)(usc_InReg(info,CCSR) | BIT13) );
+ usc_RTCmd( info, RTCmd_PurgeRxFifo );
+
+ info->rx_enabled = false;
+ info->rx_overflow = false;
+ info->rx_rcc_underrun = false;
+
+} /* end of stop_receiver() */
+
+/* usc_start_receiver()
+ *
+ * Enable the USC receiver
+ *
+ * Arguments: info pointer to device instance data
+ * Return Value: None
+ */
+static void usc_start_receiver( struct mgsl_struct *info )
+{
+ u32 phys_addr;
+
+ if (debug_level >= DEBUG_LEVEL_ISR)
+ printk("%s(%d):usc_start_receiver(%s)\n",
+ __FILE__,__LINE__, info->device_name );
+
+ mgsl_reset_rx_dma_buffers( info );
+ usc_stop_receiver( info );
+
+ usc_OutReg( info, CCSR, (u16)(usc_InReg(info,CCSR) | BIT13) );
+ usc_RTCmd( info, RTCmd_PurgeRxFifo );
+
+ if ( info->params.mode == MGSL_MODE_HDLC ||
+ info->params.mode == MGSL_MODE_RAW ) {
+ /* DMA mode Transfers */
+ /* Program the DMA controller. */
+ /* Enable the DMA controller end of buffer interrupt. */
+
+ /* program 16C32 with physical address of 1st DMA buffer entry */
+ phys_addr = info->rx_buffer_list[0].phys_entry;
+ usc_OutDmaReg( info, NRARL, (u16)phys_addr );
+ usc_OutDmaReg( info, NRARU, (u16)(phys_addr >> 16) );
+
+ usc_UnlatchRxstatusBits( info, RXSTATUS_ALL );
+ usc_ClearIrqPendingBits( info, RECEIVE_DATA + RECEIVE_STATUS );
+ usc_EnableInterrupts( info, RECEIVE_STATUS );
+
+ /* 1. Arm End of Buffer (EOB) Receive DMA Interrupt (BIT2 of RDIAR) */
+ /* 2. Enable Receive DMA Interrupts (BIT1 of DICR) */
+
+ usc_OutDmaReg( info, RDIAR, BIT3 + BIT2 );
+ usc_OutDmaReg( info, DICR, (u16)(usc_InDmaReg(info,DICR) | BIT1) );
+ usc_DmaCmd( info, DmaCmd_InitRxChannel );
+ if ( info->params.flags & HDLC_FLAG_AUTO_DCD )
+ usc_EnableReceiver(info,ENABLE_AUTO_DCD);
+ else
+ usc_EnableReceiver(info,ENABLE_UNCONDITIONAL);
+ } else {
+ usc_UnlatchRxstatusBits(info, RXSTATUS_ALL);
+ usc_ClearIrqPendingBits(info, RECEIVE_DATA + RECEIVE_STATUS);
+ usc_EnableInterrupts(info, RECEIVE_DATA);
+
+ usc_RTCmd( info, RTCmd_PurgeRxFifo );
+ usc_RCmd( info, RCmd_EnterHuntmode );
+
+ usc_EnableReceiver(info,ENABLE_UNCONDITIONAL);
+ }
+
+ usc_OutReg( info, CCSR, 0x1020 );
+
+ info->rx_enabled = true;
+
+} /* end of usc_start_receiver() */
+
+/* usc_start_transmitter()
+ *
+ * Enable the USC transmitter and send a transmit frame if
+ * one is loaded in the DMA buffers.
+ *
+ * Arguments: info pointer to device instance data
+ * Return Value: None
+ */
+static void usc_start_transmitter( struct mgsl_struct *info )
+{
+ u32 phys_addr;
+ unsigned int FrameSize;
+
+ if (debug_level >= DEBUG_LEVEL_ISR)
+ printk("%s(%d):usc_start_transmitter(%s)\n",
+ __FILE__,__LINE__, info->device_name );
+
+ if ( info->xmit_cnt ) {
+
+ /* If auto RTS enabled and RTS is inactive, then assert */
+ /* RTS and set a flag indicating that the driver should */
+ /* negate RTS when the transmission completes. */
+
+ info->drop_rts_on_tx_done = false;
+
+ if ( info->params.flags & HDLC_FLAG_AUTO_RTS ) {
+ usc_get_serial_signals( info );
+ if ( !(info->serial_signals & SerialSignal_RTS) ) {
+ info->serial_signals |= SerialSignal_RTS;
+ usc_set_serial_signals( info );
+ info->drop_rts_on_tx_done = true;
+ }
+ }
+
+
+ if ( info->params.mode == MGSL_MODE_ASYNC ) {
+ if ( !info->tx_active ) {
+ usc_UnlatchTxstatusBits(info, TXSTATUS_ALL);
+ usc_ClearIrqPendingBits(info, TRANSMIT_STATUS + TRANSMIT_DATA);
+ usc_EnableInterrupts(info, TRANSMIT_DATA);
+ usc_load_txfifo(info);
+ }
+ } else {
+ /* Disable transmit DMA controller while programming. */
+ usc_DmaCmd( info, DmaCmd_ResetTxChannel );
+
+ /* Transmit DMA buffer is loaded, so program USC */
+ /* to send the frame contained in the buffers. */
+
+ FrameSize = info->tx_buffer_list[info->start_tx_dma_buffer].rcc;
+
+ /* if operating in Raw sync mode, reset the rcc component
+ * of the tx dma buffer entry, otherwise, the serial controller
+ * will send a closing sync char after this count.
+ */
+ if ( info->params.mode == MGSL_MODE_RAW )
+ info->tx_buffer_list[info->start_tx_dma_buffer].rcc = 0;
+
+ /* Program the Transmit Character Length Register (TCLR) */
+ /* and clear FIFO (TCC is loaded with TCLR on FIFO clear) */
+ usc_OutReg( info, TCLR, (u16)FrameSize );
+
+ usc_RTCmd( info, RTCmd_PurgeTxFifo );
+
+ /* Program the address of the 1st DMA Buffer Entry in linked list */
+ phys_addr = info->tx_buffer_list[info->start_tx_dma_buffer].phys_entry;
+ usc_OutDmaReg( info, NTARL, (u16)phys_addr );
+ usc_OutDmaReg( info, NTARU, (u16)(phys_addr >> 16) );
+
+ usc_UnlatchTxstatusBits( info, TXSTATUS_ALL );
+ usc_ClearIrqPendingBits( info, TRANSMIT_STATUS );
+ usc_EnableInterrupts( info, TRANSMIT_STATUS );
+
+ if ( info->params.mode == MGSL_MODE_RAW &&
+ info->num_tx_dma_buffers > 1 ) {
+ /* When running external sync mode, attempt to 'stream' transmit */
+ /* by filling tx dma buffers as they become available. To do this */
+ /* we need to enable Tx DMA EOB Status interrupts : */
+ /* */
+ /* 1. Arm End of Buffer (EOB) Transmit DMA Interrupt (BIT2 of TDIAR) */
+ /* 2. Enable Transmit DMA Interrupts (BIT0 of DICR) */
+
+ usc_OutDmaReg( info, TDIAR, BIT2|BIT3 );
+ usc_OutDmaReg( info, DICR, (u16)(usc_InDmaReg(info,DICR) | BIT0) );
+ }
+
+ /* Initialize Transmit DMA Channel */
+ usc_DmaCmd( info, DmaCmd_InitTxChannel );
+
+ usc_TCmd( info, TCmd_SendFrame );
+
+ mod_timer(&info->tx_timer, jiffies +
+ msecs_to_jiffies(5000));
+ }
+ info->tx_active = true;
+ }
+
+ if ( !info->tx_enabled ) {
+ info->tx_enabled = true;
+ if ( info->params.flags & HDLC_FLAG_AUTO_CTS )
+ usc_EnableTransmitter(info,ENABLE_AUTO_CTS);
+ else
+ usc_EnableTransmitter(info,ENABLE_UNCONDITIONAL);
+ }
+
+} /* end of usc_start_transmitter() */
+
+/* usc_stop_transmitter()
+ *
+ * Stops the transmitter and DMA
+ *
+ * Arguments: info pointer to device isntance data
+ * Return Value: None
+ */
+static void usc_stop_transmitter( struct mgsl_struct *info )
+{
+ if (debug_level >= DEBUG_LEVEL_ISR)
+ printk("%s(%d):usc_stop_transmitter(%s)\n",
+ __FILE__,__LINE__, info->device_name );
+
+ del_timer(&info->tx_timer);
+
+ usc_UnlatchTxstatusBits( info, TXSTATUS_ALL );
+ usc_ClearIrqPendingBits( info, TRANSMIT_STATUS + TRANSMIT_DATA );
+ usc_DisableInterrupts( info, TRANSMIT_STATUS + TRANSMIT_DATA );
+
+ usc_EnableTransmitter(info,DISABLE_UNCONDITIONAL);
+ usc_DmaCmd( info, DmaCmd_ResetTxChannel );
+ usc_RTCmd( info, RTCmd_PurgeTxFifo );
+
+ info->tx_enabled = false;
+ info->tx_active = false;
+
+} /* end of usc_stop_transmitter() */
+
+/* usc_load_txfifo()
+ *
+ * Fill the transmit FIFO until the FIFO is full or
+ * there is no more data to load.
+ *
+ * Arguments: info pointer to device extension (instance data)
+ * Return Value: None
+ */
+static void usc_load_txfifo( struct mgsl_struct *info )
+{
+ int Fifocount;
+ u8 TwoBytes[2];
+
+ if ( !info->xmit_cnt && !info->x_char )
+ return;
+
+ /* Select transmit FIFO status readback in TICR */
+ usc_TCmd( info, TCmd_SelectTicrTxFifostatus );
+
+ /* load the Transmit FIFO until FIFOs full or all data sent */
+
+ while( (Fifocount = usc_InReg(info, TICR) >> 8) && info->xmit_cnt ) {
+ /* there is more space in the transmit FIFO and */
+ /* there is more data in transmit buffer */
+
+ if ( (info->xmit_cnt > 1) && (Fifocount > 1) && !info->x_char ) {
+ /* write a 16-bit word from transmit buffer to 16C32 */
+
+ TwoBytes[0] = info->xmit_buf[info->xmit_tail++];
+ info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1);
+ TwoBytes[1] = info->xmit_buf[info->xmit_tail++];
+ info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1);
+
+ outw( *((u16 *)TwoBytes), info->io_base + DATAREG);
+
+ info->xmit_cnt -= 2;
+ info->icount.tx += 2;
+ } else {
+ /* only 1 byte left to transmit or 1 FIFO slot left */
+
+ outw( (inw( info->io_base + CCAR) & 0x0780) | (TDR+LSBONLY),
+ info->io_base + CCAR );
+
+ if (info->x_char) {
+ /* transmit pending high priority char */
+ outw( info->x_char,info->io_base + CCAR );
+ info->x_char = 0;
+ } else {
+ outw( info->xmit_buf[info->xmit_tail++],info->io_base + CCAR );
+ info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1);
+ info->xmit_cnt--;
+ }
+ info->icount.tx++;
+ }
+ }
+
+} /* end of usc_load_txfifo() */
+
+/* usc_reset()
+ *
+ * Reset the adapter to a known state and prepare it for further use.
+ *
+ * Arguments: info pointer to device instance data
+ * Return Value: None
+ */
+static void usc_reset( struct mgsl_struct *info )
+{
+ if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
+ int i;
+ u32 readval;
+
+ /* Set BIT30 of Misc Control Register */
+ /* (Local Control Register 0x50) to force reset of USC. */
+
+ volatile u32 *MiscCtrl = (u32 *)(info->lcr_base + 0x50);
+ u32 *LCR0BRDR = (u32 *)(info->lcr_base + 0x28);
+
+ info->misc_ctrl_value |= BIT30;
+ *MiscCtrl = info->misc_ctrl_value;
+
+ /*
+ * Force at least 170ns delay before clearing
+ * reset bit. Each read from LCR takes at least
+ * 30ns so 10 times for 300ns to be safe.
+ */
+ for(i=0;i<10;i++)
+ readval = *MiscCtrl;
+
+ info->misc_ctrl_value &= ~BIT30;
+ *MiscCtrl = info->misc_ctrl_value;
+
+ *LCR0BRDR = BUS_DESCRIPTOR(
+ 1, // Write Strobe Hold (0-3)
+ 2, // Write Strobe Delay (0-3)
+ 2, // Read Strobe Delay (0-3)
+ 0, // NWDD (Write data-data) (0-3)
+ 4, // NWAD (Write Addr-data) (0-31)
+ 0, // NXDA (Read/Write Data-Addr) (0-3)
+ 0, // NRDD (Read Data-Data) (0-3)
+ 5 // NRAD (Read Addr-Data) (0-31)
+ );
+ } else {
+ /* do HW reset */
+ outb( 0,info->io_base + 8 );
+ }
+
+ info->mbre_bit = 0;
+ info->loopback_bits = 0;
+ info->usc_idle_mode = 0;
+
+ /*
+ * Program the Bus Configuration Register (BCR)
+ *
+ * <15> 0 Don't use separate address
+ * <14..6> 0 reserved
+ * <5..4> 00 IAckmode = Default, don't care
+ * <3> 1 Bus Request Totem Pole output
+ * <2> 1 Use 16 Bit data bus
+ * <1> 0 IRQ Totem Pole output
+ * <0> 0 Don't Shift Right Addr
+ *
+ * 0000 0000 0000 1100 = 0x000c
+ *
+ * By writing to io_base + SDPIN the Wait/Ack pin is
+ * programmed to work as a Wait pin.
+ */
+
+ outw( 0x000c,info->io_base + SDPIN );
+
+
+ outw( 0,info->io_base );
+ outw( 0,info->io_base + CCAR );
+
+ /* select little endian byte ordering */
+ usc_RTCmd( info, RTCmd_SelectLittleEndian );
+
+
+ /* Port Control Register (PCR)
+ *
+ * <15..14> 11 Port 7 is Output (~DMAEN, Bit 14 : 0 = Enabled)
+ * <13..12> 11 Port 6 is Output (~INTEN, Bit 12 : 0 = Enabled)
+ * <11..10> 00 Port 5 is Input (No Connect, Don't Care)
+ * <9..8> 00 Port 4 is Input (No Connect, Don't Care)
+ * <7..6> 11 Port 3 is Output (~RTS, Bit 6 : 0 = Enabled )
+ * <5..4> 11 Port 2 is Output (~DTR, Bit 4 : 0 = Enabled )
+ * <3..2> 01 Port 1 is Input (Dedicated RxC)
+ * <1..0> 01 Port 0 is Input (Dedicated TxC)
+ *
+ * 1111 0000 1111 0101 = 0xf0f5
+ */
+
+ usc_OutReg( info, PCR, 0xf0f5 );
+
+
+ /*
+ * Input/Output Control Register
+ *
+ * <15..14> 00 CTS is active low input
+ * <13..12> 00 DCD is active low input
+ * <11..10> 00 TxREQ pin is input (DSR)
+ * <9..8> 00 RxREQ pin is input (RI)
+ * <7..6> 00 TxD is output (Transmit Data)
+ * <5..3> 000 TxC Pin in Input (14.7456MHz Clock)
+ * <2..0> 100 RxC is Output (drive with BRG0)
+ *
+ * 0000 0000 0000 0100 = 0x0004
+ */
+
+ usc_OutReg( info, IOCR, 0x0004 );
+
+} /* end of usc_reset() */
+
+/* usc_set_async_mode()
+ *
+ * Program adapter for asynchronous communications.
+ *
+ * Arguments: info pointer to device instance data
+ * Return Value: None
+ */
+static void usc_set_async_mode( struct mgsl_struct *info )
+{
+ u16 RegValue;
+
+ /* disable interrupts while programming USC */
+ usc_DisableMasterIrqBit( info );
+
+ outw( 0, info->io_base ); /* clear Master Bus Enable (DCAR) */
+ usc_DmaCmd( info, DmaCmd_ResetAllChannels ); /* disable both DMA channels */
+
+ usc_loopback_frame( info );
+
+ /* Channel mode Register (CMR)
+ *
+ * <15..14> 00 Tx Sub modes, 00 = 1 Stop Bit
+ * <13..12> 00 00 = 16X Clock
+ * <11..8> 0000 Transmitter mode = Asynchronous
+ * <7..6> 00 reserved?
+ * <5..4> 00 Rx Sub modes, 00 = 16X Clock
+ * <3..0> 0000 Receiver mode = Asynchronous
+ *
+ * 0000 0000 0000 0000 = 0x0
+ */
+
+ RegValue = 0;
+ if ( info->params.stop_bits != 1 )
+ RegValue |= BIT14;
+ usc_OutReg( info, CMR, RegValue );
+
+
+ /* Receiver mode Register (RMR)
+ *
+ * <15..13> 000 encoding = None
+ * <12..08> 00000 reserved (Sync Only)
+ * <7..6> 00 Even parity
+ * <5> 0 parity disabled
+ * <4..2> 000 Receive Char Length = 8 bits
+ * <1..0> 00 Disable Receiver
+ *
+ * 0000 0000 0000 0000 = 0x0
+ */
+
+ RegValue = 0;
+
+ if ( info->params.data_bits != 8 )
+ RegValue |= BIT4+BIT3+BIT2;
+
+ if ( info->params.parity != ASYNC_PARITY_NONE ) {
+ RegValue |= BIT5;
+ if ( info->params.parity != ASYNC_PARITY_ODD )
+ RegValue |= BIT6;
+ }
+
+ usc_OutReg( info, RMR, RegValue );
+
+
+ /* Set IRQ trigger level */
+
+ usc_RCmd( info, RCmd_SelectRicrIntLevel );
+
+
+ /* Receive Interrupt Control Register (RICR)
+ *
+ * <15..8> ? RxFIFO IRQ Request Level
+ *
+ * Note: For async mode the receive FIFO level must be set
+ * to 0 to avoid the situation where the FIFO contains fewer bytes
+ * than the trigger level and no more data is expected.
+ *
+ * <7> 0 Exited Hunt IA (Interrupt Arm)
+ * <6> 0 Idle Received IA
+ * <5> 0 Break/Abort IA
+ * <4> 0 Rx Bound IA
+ * <3> 0 Queued status reflects oldest byte in FIFO
+ * <2> 0 Abort/PE IA
+ * <1> 0 Rx Overrun IA
+ * <0> 0 Select TC0 value for readback
+ *
+ * 0000 0000 0100 0000 = 0x0000 + (FIFOLEVEL in MSB)
+ */
+
+ usc_OutReg( info, RICR, 0x0000 );
+
+ usc_UnlatchRxstatusBits( info, RXSTATUS_ALL );
+ usc_ClearIrqPendingBits( info, RECEIVE_STATUS );
+
+
+ /* Transmit mode Register (TMR)
+ *
+ * <15..13> 000 encoding = None
+ * <12..08> 00000 reserved (Sync Only)
+ * <7..6> 00 Transmit parity Even
+ * <5> 0 Transmit parity Disabled
+ * <4..2> 000 Tx Char Length = 8 bits
+ * <1..0> 00 Disable Transmitter
+ *
+ * 0000 0000 0000 0000 = 0x0
+ */
+
+ RegValue = 0;
+
+ if ( info->params.data_bits != 8 )
+ RegValue |= BIT4+BIT3+BIT2;
+
+ if ( info->params.parity != ASYNC_PARITY_NONE ) {
+ RegValue |= BIT5;
+ if ( info->params.parity != ASYNC_PARITY_ODD )
+ RegValue |= BIT6;
+ }
+
+ usc_OutReg( info, TMR, RegValue );
+
+ usc_set_txidle( info );
+
+
+ /* Set IRQ trigger level */
+
+ usc_TCmd( info, TCmd_SelectTicrIntLevel );
+
+
+ /* Transmit Interrupt Control Register (TICR)
+ *
+ * <15..8> ? Transmit FIFO IRQ Level
+ * <7> 0 Present IA (Interrupt Arm)
+ * <6> 1 Idle Sent IA
+ * <5> 0 Abort Sent IA
+ * <4> 0 EOF/EOM Sent IA
+ * <3> 0 CRC Sent IA
+ * <2> 0 1 = Wait for SW Trigger to Start Frame
+ * <1> 0 Tx Underrun IA
+ * <0> 0 TC0 constant on read back
+ *
+ * 0000 0000 0100 0000 = 0x0040
+ */
+
+ usc_OutReg( info, TICR, 0x1f40 );
+
+ usc_UnlatchTxstatusBits( info, TXSTATUS_ALL );
+ usc_ClearIrqPendingBits( info, TRANSMIT_STATUS );
+
+ usc_enable_async_clock( info, info->params.data_rate );
+
+
+ /* Channel Control/status Register (CCSR)
+ *
+ * <15> X RCC FIFO Overflow status (RO)
+ * <14> X RCC FIFO Not Empty status (RO)
+ * <13> 0 1 = Clear RCC FIFO (WO)
+ * <12> X DPLL in Sync status (RO)
+ * <11> X DPLL 2 Missed Clocks status (RO)
+ * <10> X DPLL 1 Missed Clock status (RO)
+ * <9..8> 00 DPLL Resync on rising and falling edges (RW)
+ * <7> X SDLC Loop On status (RO)
+ * <6> X SDLC Loop Send status (RO)
+ * <5> 1 Bypass counters for TxClk and RxClk (RW)
+ * <4..2> 000 Last Char of SDLC frame has 8 bits (RW)
+ * <1..0> 00 reserved
+ *
+ * 0000 0000 0010 0000 = 0x0020
+ */
+
+ usc_OutReg( info, CCSR, 0x0020 );
+
+ usc_DisableInterrupts( info, TRANSMIT_STATUS + TRANSMIT_DATA +
+ RECEIVE_DATA + RECEIVE_STATUS );
+
+ usc_ClearIrqPendingBits( info, TRANSMIT_STATUS + TRANSMIT_DATA +
+ RECEIVE_DATA + RECEIVE_STATUS );
+
+ usc_EnableMasterIrqBit( info );
+
+ if (info->bus_type == MGSL_BUS_TYPE_ISA) {
+ /* Enable INTEN (Port 6, Bit12) */
+ /* This connects the IRQ request signal to the ISA bus */
+ usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT13) & ~BIT12));
+ }
+
+ if (info->params.loopback) {
+ info->loopback_bits = 0x300;
+ outw(0x0300, info->io_base + CCAR);
+ }
+
+} /* end of usc_set_async_mode() */
+
+/* usc_loopback_frame()
+ *
+ * Loop back a small (2 byte) dummy SDLC frame.
+ * Interrupts and DMA are NOT used. The purpose of this is to
+ * clear any 'stale' status info left over from running in async mode.
+ *
+ * The 16C32 shows the strange behaviour of marking the 1st
+ * received SDLC frame with a CRC error even when there is no
+ * CRC error. To get around this a small dummy from of 2 bytes
+ * is looped back when switching from async to sync mode.
+ *
+ * Arguments: info pointer to device instance data
+ * Return Value: None
+ */
+static void usc_loopback_frame( struct mgsl_struct *info )
+{
+ int i;
+ unsigned long oldmode = info->params.mode;
+
+ info->params.mode = MGSL_MODE_HDLC;
+
+ usc_DisableMasterIrqBit( info );
+
+ usc_set_sdlc_mode( info );
+ usc_enable_loopback( info, 1 );
+
+ /* Write 16-bit Time Constant for BRG0 */
+ usc_OutReg( info, TC0R, 0 );
+
+ /* Channel Control Register (CCR)
+ *
+ * <15..14> 00 Don't use 32-bit Tx Control Blocks (TCBs)
+ * <13> 0 Trigger Tx on SW Command Disabled
+ * <12> 0 Flag Preamble Disabled
+ * <11..10> 00 Preamble Length = 8-Bits
+ * <9..8> 01 Preamble Pattern = flags
+ * <7..6> 10 Don't use 32-bit Rx status Blocks (RSBs)
+ * <5> 0 Trigger Rx on SW Command Disabled
+ * <4..0> 0 reserved
+ *
+ * 0000 0001 0000 0000 = 0x0100
+ */
+
+ usc_OutReg( info, CCR, 0x0100 );
+
+ /* SETUP RECEIVER */
+ usc_RTCmd( info, RTCmd_PurgeRxFifo );
+ usc_EnableReceiver(info,ENABLE_UNCONDITIONAL);
+
+ /* SETUP TRANSMITTER */
+ /* Program the Transmit Character Length Register (TCLR) */
+ /* and clear FIFO (TCC is loaded with TCLR on FIFO clear) */
+ usc_OutReg( info, TCLR, 2 );
+ usc_RTCmd( info, RTCmd_PurgeTxFifo );
+
+ /* unlatch Tx status bits, and start transmit channel. */
+ usc_UnlatchTxstatusBits(info,TXSTATUS_ALL);
+ outw(0,info->io_base + DATAREG);
+
+ /* ENABLE TRANSMITTER */
+ usc_TCmd( info, TCmd_SendFrame );
+ usc_EnableTransmitter(info,ENABLE_UNCONDITIONAL);
+
+ /* WAIT FOR RECEIVE COMPLETE */
+ for (i=0 ; i<1000 ; i++)
+ if (usc_InReg( info, RCSR ) & (BIT8 + BIT4 + BIT3 + BIT1))
+ break;
+
+ /* clear Internal Data loopback mode */
+ usc_enable_loopback(info, 0);
+
+ usc_EnableMasterIrqBit(info);
+
+ info->params.mode = oldmode;
+
+} /* end of usc_loopback_frame() */
+
+/* usc_set_sync_mode() Programs the USC for SDLC communications.
+ *
+ * Arguments: info pointer to adapter info structure
+ * Return Value: None
+ */
+static void usc_set_sync_mode( struct mgsl_struct *info )
+{
+ usc_loopback_frame( info );
+ usc_set_sdlc_mode( info );
+
+ if (info->bus_type == MGSL_BUS_TYPE_ISA) {
+ /* Enable INTEN (Port 6, Bit12) */
+ /* This connects the IRQ request signal to the ISA bus */
+ usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT13) & ~BIT12));
+ }
+
+ usc_enable_aux_clock(info, info->params.clock_speed);
+
+ if (info->params.loopback)
+ usc_enable_loopback(info,1);
+
+} /* end of mgsl_set_sync_mode() */
+
+/* usc_set_txidle() Set the HDLC idle mode for the transmitter.
+ *
+ * Arguments: info pointer to device instance data
+ * Return Value: None
+ */
+static void usc_set_txidle( struct mgsl_struct *info )
+{
+ u16 usc_idle_mode = IDLEMODE_FLAGS;
+
+ /* Map API idle mode to USC register bits */
+
+ switch( info->idle_mode ){
+ case HDLC_TXIDLE_FLAGS: usc_idle_mode = IDLEMODE_FLAGS; break;
+ case HDLC_TXIDLE_ALT_ZEROS_ONES: usc_idle_mode = IDLEMODE_ALT_ONE_ZERO; break;
+ case HDLC_TXIDLE_ZEROS: usc_idle_mode = IDLEMODE_ZERO; break;
+ case HDLC_TXIDLE_ONES: usc_idle_mode = IDLEMODE_ONE; break;
+ case HDLC_TXIDLE_ALT_MARK_SPACE: usc_idle_mode = IDLEMODE_ALT_MARK_SPACE; break;
+ case HDLC_TXIDLE_SPACE: usc_idle_mode = IDLEMODE_SPACE; break;
+ case HDLC_TXIDLE_MARK: usc_idle_mode = IDLEMODE_MARK; break;
+ }
+
+ info->usc_idle_mode = usc_idle_mode;
+ //usc_OutReg(info, TCSR, usc_idle_mode);
+ info->tcsr_value &= ~IDLEMODE_MASK; /* clear idle mode bits */
+ info->tcsr_value += usc_idle_mode;
+ usc_OutReg(info, TCSR, info->tcsr_value);
+
+ /*
+ * if SyncLink WAN adapter is running in external sync mode, the
+ * transmitter has been set to Monosync in order to try to mimic
+ * a true raw outbound bit stream. Monosync still sends an open/close
+ * sync char at the start/end of a frame. Try to match those sync
+ * patterns to the idle mode set here
+ */
+ if ( info->params.mode == MGSL_MODE_RAW ) {
+ unsigned char syncpat = 0;
+ switch( info->idle_mode ) {
+ case HDLC_TXIDLE_FLAGS:
+ syncpat = 0x7e;
+ break;
+ case HDLC_TXIDLE_ALT_ZEROS_ONES:
+ syncpat = 0x55;
+ break;
+ case HDLC_TXIDLE_ZEROS:
+ case HDLC_TXIDLE_SPACE:
+ syncpat = 0x00;
+ break;
+ case HDLC_TXIDLE_ONES:
+ case HDLC_TXIDLE_MARK:
+ syncpat = 0xff;
+ break;
+ case HDLC_TXIDLE_ALT_MARK_SPACE:
+ syncpat = 0xaa;
+ break;
+ }
+
+ usc_SetTransmitSyncChars(info,syncpat,syncpat);
+ }
+
+} /* end of usc_set_txidle() */
+
+/* usc_get_serial_signals()
+ *
+ * Query the adapter for the state of the V24 status (input) signals.
+ *
+ * Arguments: info pointer to device instance data
+ * Return Value: None
+ */
+static void usc_get_serial_signals( struct mgsl_struct *info )
+{
+ u16 status;
+
+ /* clear all serial signals except DTR and RTS */
+ info->serial_signals &= SerialSignal_DTR + SerialSignal_RTS;
+
+ /* Read the Misc Interrupt status Register (MISR) to get */
+ /* the V24 status signals. */
+
+ status = usc_InReg( info, MISR );
+
+ /* set serial signal bits to reflect MISR */
+
+ if ( status & MISCSTATUS_CTS )
+ info->serial_signals |= SerialSignal_CTS;
+
+ if ( status & MISCSTATUS_DCD )
+ info->serial_signals |= SerialSignal_DCD;
+
+ if ( status & MISCSTATUS_RI )
+ info->serial_signals |= SerialSignal_RI;
+
+ if ( status & MISCSTATUS_DSR )
+ info->serial_signals |= SerialSignal_DSR;
+
+} /* end of usc_get_serial_signals() */
+
+/* usc_set_serial_signals()
+ *
+ * Set the state of DTR and RTS based on contents of
+ * serial_signals member of device extension.
+ *
+ * Arguments: info pointer to device instance data
+ * Return Value: None
+ */
+static void usc_set_serial_signals( struct mgsl_struct *info )
+{
+ u16 Control;
+ unsigned char V24Out = info->serial_signals;
+
+ /* get the current value of the Port Control Register (PCR) */
+
+ Control = usc_InReg( info, PCR );
+
+ if ( V24Out & SerialSignal_RTS )
+ Control &= ~(BIT6);
+ else
+ Control |= BIT6;
+
+ if ( V24Out & SerialSignal_DTR )
+ Control &= ~(BIT4);
+ else
+ Control |= BIT4;
+
+ usc_OutReg( info, PCR, Control );
+
+} /* end of usc_set_serial_signals() */
+
+/* usc_enable_async_clock()
+ *
+ * Enable the async clock at the specified frequency.
+ *
+ * Arguments: info pointer to device instance data
+ * data_rate data rate of clock in bps
+ * 0 disables the AUX clock.
+ * Return Value: None
+ */
+static void usc_enable_async_clock( struct mgsl_struct *info, u32 data_rate )
+{
+ if ( data_rate ) {
+ /*
+ * Clock mode Control Register (CMCR)
+ *
+ * <15..14> 00 counter 1 Disabled
+ * <13..12> 00 counter 0 Disabled
+ * <11..10> 11 BRG1 Input is TxC Pin
+ * <9..8> 11 BRG0 Input is TxC Pin
+ * <7..6> 01 DPLL Input is BRG1 Output
+ * <5..3> 100 TxCLK comes from BRG0
+ * <2..0> 100 RxCLK comes from BRG0
+ *
+ * 0000 1111 0110 0100 = 0x0f64
+ */
+
+ usc_OutReg( info, CMCR, 0x0f64 );
+
+
+ /*
+ * Write 16-bit Time Constant for BRG0
+ * Time Constant = (ClkSpeed / data_rate) - 1
+ * ClkSpeed = 921600 (ISA), 691200 (PCI)
+ */
+
+ if ( info->bus_type == MGSL_BUS_TYPE_PCI )
+ usc_OutReg( info, TC0R, (u16)((691200/data_rate) - 1) );
+ else
+ usc_OutReg( info, TC0R, (u16)((921600/data_rate) - 1) );
+
+
+ /*
+ * Hardware Configuration Register (HCR)
+ * Clear Bit 1, BRG0 mode = Continuous
+ * Set Bit 0 to enable BRG0.
+ */
+
+ usc_OutReg( info, HCR,
+ (u16)((usc_InReg( info, HCR ) & ~BIT1) | BIT0) );
+
+
+ /* Input/Output Control Reg, <2..0> = 100, Drive RxC pin with BRG0 */
+
+ usc_OutReg( info, IOCR,
+ (u16)((usc_InReg(info, IOCR) & 0xfff8) | 0x0004) );
+ } else {
+ /* data rate == 0 so turn off BRG0 */
+ usc_OutReg( info, HCR, (u16)(usc_InReg( info, HCR ) & ~BIT0) );
+ }
+
+} /* end of usc_enable_async_clock() */
+
+/*
+ * Buffer Structures:
+ *
+ * Normal memory access uses virtual addresses that can make discontiguous
+ * physical memory pages appear to be contiguous in the virtual address
+ * space (the processors memory mapping handles the conversions).
+ *
+ * DMA transfers require physically contiguous memory. This is because
+ * the DMA system controller and DMA bus masters deal with memory using
+ * only physical addresses.
+ *
+ * This causes a problem under Windows NT when large DMA buffers are
+ * needed. Fragmentation of the nonpaged pool prevents allocations of
+ * physically contiguous buffers larger than the PAGE_SIZE.
+ *
+ * However the 16C32 supports Bus Master Scatter/Gather DMA which
+ * allows DMA transfers to physically discontiguous buffers. Information
+ * about each data transfer buffer is contained in a memory structure
+ * called a 'buffer entry'. A list of buffer entries is maintained
+ * to track and control the use of the data transfer buffers.
+ *
+ * To support this strategy we will allocate sufficient PAGE_SIZE
+ * contiguous memory buffers to allow for the total required buffer
+ * space.
+ *
+ * The 16C32 accesses the list of buffer entries using Bus Master
+ * DMA. Control information is read from the buffer entries by the
+ * 16C32 to control data transfers. status information is written to
+ * the buffer entries by the 16C32 to indicate the status of completed
+ * transfers.
+ *
+ * The CPU writes control information to the buffer entries to control
+ * the 16C32 and reads status information from the buffer entries to
+ * determine information about received and transmitted frames.
+ *
+ * Because the CPU and 16C32 (adapter) both need simultaneous access
+ * to the buffer entries, the buffer entry memory is allocated with
+ * HalAllocateCommonBuffer(). This restricts the size of the buffer
+ * entry list to PAGE_SIZE.
+ *
+ * The actual data buffers on the other hand will only be accessed
+ * by the CPU or the adapter but not by both simultaneously. This allows
+ * Scatter/Gather packet based DMA procedures for using physically
+ * discontiguous pages.
+ */
+
+/*
+ * mgsl_reset_tx_dma_buffers()
+ *
+ * Set the count for all transmit buffers to 0 to indicate the
+ * buffer is available for use and set the current buffer to the
+ * first buffer. This effectively makes all buffers free and
+ * discards any data in buffers.
+ *
+ * Arguments: info pointer to device instance data
+ * Return Value: None
+ */
+static void mgsl_reset_tx_dma_buffers( struct mgsl_struct *info )
+{
+ unsigned int i;
+
+ for ( i = 0; i < info->tx_buffer_count; i++ ) {
+ *((unsigned long *)&(info->tx_buffer_list[i].count)) = 0;
+ }
+
+ info->current_tx_buffer = 0;
+ info->start_tx_dma_buffer = 0;
+ info->tx_dma_buffers_used = 0;
+
+ info->get_tx_holding_index = 0;
+ info->put_tx_holding_index = 0;
+ info->tx_holding_count = 0;
+
+} /* end of mgsl_reset_tx_dma_buffers() */
+
+/*
+ * num_free_tx_dma_buffers()
+ *
+ * returns the number of free tx dma buffers available
+ *
+ * Arguments: info pointer to device instance data
+ * Return Value: number of free tx dma buffers
+ */
+static int num_free_tx_dma_buffers(struct mgsl_struct *info)
+{
+ return info->tx_buffer_count - info->tx_dma_buffers_used;
+}
+
+/*
+ * mgsl_reset_rx_dma_buffers()
+ *
+ * Set the count for all receive buffers to DMABUFFERSIZE
+ * and set the current buffer to the first buffer. This effectively
+ * makes all buffers free and discards any data in buffers.
+ *
+ * Arguments: info pointer to device instance data
+ * Return Value: None
+ */
+static void mgsl_reset_rx_dma_buffers( struct mgsl_struct *info )
+{
+ unsigned int i;
+
+ for ( i = 0; i < info->rx_buffer_count; i++ ) {
+ *((unsigned long *)&(info->rx_buffer_list[i].count)) = DMABUFFERSIZE;
+// info->rx_buffer_list[i].count = DMABUFFERSIZE;
+// info->rx_buffer_list[i].status = 0;
+ }
+
+ info->current_rx_buffer = 0;
+
+} /* end of mgsl_reset_rx_dma_buffers() */
+
+/*
+ * mgsl_free_rx_frame_buffers()
+ *
+ * Free the receive buffers used by a received SDLC
+ * frame such that the buffers can be reused.
+ *
+ * Arguments:
+ *
+ * info pointer to device instance data
+ * StartIndex index of 1st receive buffer of frame
+ * EndIndex index of last receive buffer of frame
+ *
+ * Return Value: None
+ */
+static void mgsl_free_rx_frame_buffers( struct mgsl_struct *info, unsigned int StartIndex, unsigned int EndIndex )
+{
+ bool Done = false;
+ DMABUFFERENTRY *pBufEntry;
+ unsigned int Index;
+
+ /* Starting with 1st buffer entry of the frame clear the status */
+ /* field and set the count field to DMA Buffer Size. */
+
+ Index = StartIndex;
+
+ while( !Done ) {
+ pBufEntry = &(info->rx_buffer_list[Index]);
+
+ if ( Index == EndIndex ) {
+ /* This is the last buffer of the frame! */
+ Done = true;
+ }
+
+ /* reset current buffer for reuse */
+// pBufEntry->status = 0;
+// pBufEntry->count = DMABUFFERSIZE;
+ *((unsigned long *)&(pBufEntry->count)) = DMABUFFERSIZE;
+
+ /* advance to next buffer entry in linked list */
+ Index++;
+ if ( Index == info->rx_buffer_count )
+ Index = 0;
+ }
+
+ /* set current buffer to next buffer after last buffer of frame */
+ info->current_rx_buffer = Index;
+
+} /* end of free_rx_frame_buffers() */
+
+/* mgsl_get_rx_frame()
+ *
+ * This function attempts to return a received SDLC frame from the
+ * receive DMA buffers. Only frames received without errors are returned.
+ *
+ * Arguments: info pointer to device extension
+ * Return Value: true if frame returned, otherwise false
+ */
+static bool mgsl_get_rx_frame(struct mgsl_struct *info)
+{
+ unsigned int StartIndex, EndIndex; /* index of 1st and last buffers of Rx frame */
+ unsigned short status;
+ DMABUFFERENTRY *pBufEntry;
+ unsigned int framesize = 0;
+ bool ReturnCode = false;
+ unsigned long flags;
+ struct tty_struct *tty = info->port.tty;
+ bool return_frame = false;
+
+ /*
+ * current_rx_buffer points to the 1st buffer of the next available
+ * receive frame. To find the last buffer of the frame look for
+ * a non-zero status field in the buffer entries. (The status
+ * field is set by the 16C32 after completing a receive frame.
+ */
+
+ StartIndex = EndIndex = info->current_rx_buffer;
+
+ while( !info->rx_buffer_list[EndIndex].status ) {
+ /*
+ * If the count field of the buffer entry is non-zero then
+ * this buffer has not been used. (The 16C32 clears the count
+ * field when it starts using the buffer.) If an unused buffer
+ * is encountered then there are no frames available.
+ */
+
+ if ( info->rx_buffer_list[EndIndex].count )
+ goto Cleanup;
+
+ /* advance to next buffer entry in linked list */
+ EndIndex++;
+ if ( EndIndex == info->rx_buffer_count )
+ EndIndex = 0;
+
+ /* if entire list searched then no frame available */
+ if ( EndIndex == StartIndex ) {
+ /* If this occurs then something bad happened,
+ * all buffers have been 'used' but none mark
+ * the end of a frame. Reset buffers and receiver.
+ */
+
+ if ( info->rx_enabled ){
+ spin_lock_irqsave(&info->irq_spinlock,flags);
+ usc_start_receiver(info);
+ spin_unlock_irqrestore(&info->irq_spinlock,flags);
+ }
+ goto Cleanup;
+ }
+ }
+
+
+ /* check status of receive frame */
+
+ status = info->rx_buffer_list[EndIndex].status;
+
+ if ( status & (RXSTATUS_SHORT_FRAME + RXSTATUS_OVERRUN +
+ RXSTATUS_CRC_ERROR + RXSTATUS_ABORT) ) {
+ if ( status & RXSTATUS_SHORT_FRAME )
+ info->icount.rxshort++;
+ else if ( status & RXSTATUS_ABORT )
+ info->icount.rxabort++;
+ else if ( status & RXSTATUS_OVERRUN )
+ info->icount.rxover++;
+ else {
+ info->icount.rxcrc++;
+ if ( info->params.crc_type & HDLC_CRC_RETURN_EX )
+ return_frame = true;
+ }
+ framesize = 0;
+#if SYNCLINK_GENERIC_HDLC
+ {
+ info->netdev->stats.rx_errors++;
+ info->netdev->stats.rx_frame_errors++;
+ }
+#endif
+ } else
+ return_frame = true;
+
+ if ( return_frame ) {
+ /* receive frame has no errors, get frame size.
+ * The frame size is the starting value of the RCC (which was
+ * set to 0xffff) minus the ending value of the RCC (decremented
+ * once for each receive character) minus 2 for the 16-bit CRC.
+ */
+
+ framesize = RCLRVALUE - info->rx_buffer_list[EndIndex].rcc;
+
+ /* adjust frame size for CRC if any */
+ if ( info->params.crc_type == HDLC_CRC_16_CCITT )
+ framesize -= 2;
+ else if ( info->params.crc_type == HDLC_CRC_32_CCITT )
+ framesize -= 4;
+ }
+
+ if ( debug_level >= DEBUG_LEVEL_BH )
+ printk("%s(%d):mgsl_get_rx_frame(%s) status=%04X size=%d\n",
+ __FILE__,__LINE__,info->device_name,status,framesize);
+
+ if ( debug_level >= DEBUG_LEVEL_DATA )
+ mgsl_trace_block(info,info->rx_buffer_list[StartIndex].virt_addr,
+ min_t(int, framesize, DMABUFFERSIZE),0);
+
+ if (framesize) {
+ if ( ( (info->params.crc_type & HDLC_CRC_RETURN_EX) &&
+ ((framesize+1) > info->max_frame_size) ) ||
+ (framesize > info->max_frame_size) )
+ info->icount.rxlong++;
+ else {
+ /* copy dma buffer(s) to contiguous intermediate buffer */
+ int copy_count = framesize;
+ int index = StartIndex;
+ unsigned char *ptmp = info->intermediate_rxbuffer;
+
+ if ( !(status & RXSTATUS_CRC_ERROR))
+ info->icount.rxok++;
+
+ while(copy_count) {
+ int partial_count;
+ if ( copy_count > DMABUFFERSIZE )
+ partial_count = DMABUFFERSIZE;
+ else
+ partial_count = copy_count;
+
+ pBufEntry = &(info->rx_buffer_list[index]);
+ memcpy( ptmp, pBufEntry->virt_addr, partial_count );
+ ptmp += partial_count;
+ copy_count -= partial_count;
+
+ if ( ++index == info->rx_buffer_count )
+ index = 0;
+ }
+
+ if ( info->params.crc_type & HDLC_CRC_RETURN_EX ) {
+ ++framesize;
+ *ptmp = (status & RXSTATUS_CRC_ERROR ?
+ RX_CRC_ERROR :
+ RX_OK);
+
+ if ( debug_level >= DEBUG_LEVEL_DATA )
+ printk("%s(%d):mgsl_get_rx_frame(%s) rx frame status=%d\n",
+ __FILE__,__LINE__,info->device_name,
+ *ptmp);
+ }
+
+#if SYNCLINK_GENERIC_HDLC
+ if (info->netcount)
+ hdlcdev_rx(info,info->intermediate_rxbuffer,framesize);
+ else
+#endif
+ ldisc_receive_buf(tty, info->intermediate_rxbuffer, info->flag_buf, framesize);
+ }
+ }
+ /* Free the buffers used by this frame. */
+ mgsl_free_rx_frame_buffers( info, StartIndex, EndIndex );
+
+ ReturnCode = true;
+
+Cleanup:
+
+ if ( info->rx_enabled && info->rx_overflow ) {
+ /* The receiver needs to restarted because of
+ * a receive overflow (buffer or FIFO). If the
+ * receive buffers are now empty, then restart receiver.
+ */
+
+ if ( !info->rx_buffer_list[EndIndex].status &&
+ info->rx_buffer_list[EndIndex].count ) {
+ spin_lock_irqsave(&info->irq_spinlock,flags);
+ usc_start_receiver(info);
+ spin_unlock_irqrestore(&info->irq_spinlock,flags);
+ }
+ }
+
+ return ReturnCode;
+
+} /* end of mgsl_get_rx_frame() */
+
+/* mgsl_get_raw_rx_frame()
+ *
+ * This function attempts to return a received frame from the
+ * receive DMA buffers when running in external loop mode. In this mode,
+ * we will return at most one DMABUFFERSIZE frame to the application.
+ * The USC receiver is triggering off of DCD going active to start a new
+ * frame, and DCD going inactive to terminate the frame (similar to
+ * processing a closing flag character).
+ *
+ * In this routine, we will return DMABUFFERSIZE "chunks" at a time.
+ * If DCD goes inactive, the last Rx DMA Buffer will have a non-zero
+ * status field and the RCC field will indicate the length of the
+ * entire received frame. We take this RCC field and get the modulus
+ * of RCC and DMABUFFERSIZE to determine if number of bytes in the
+ * last Rx DMA buffer and return that last portion of the frame.
+ *
+ * Arguments: info pointer to device extension
+ * Return Value: true if frame returned, otherwise false
+ */
+static bool mgsl_get_raw_rx_frame(struct mgsl_struct *info)
+{
+ unsigned int CurrentIndex, NextIndex;
+ unsigned short status;
+ DMABUFFERENTRY *pBufEntry;
+ unsigned int framesize = 0;
+ bool ReturnCode = false;
+ unsigned long flags;
+ struct tty_struct *tty = info->port.tty;
+
+ /*
+ * current_rx_buffer points to the 1st buffer of the next available
+ * receive frame. The status field is set by the 16C32 after
+ * completing a receive frame. If the status field of this buffer
+ * is zero, either the USC is still filling this buffer or this
+ * is one of a series of buffers making up a received frame.
+ *
+ * If the count field of this buffer is zero, the USC is either
+ * using this buffer or has used this buffer. Look at the count
+ * field of the next buffer. If that next buffer's count is
+ * non-zero, the USC is still actively using the current buffer.
+ * Otherwise, if the next buffer's count field is zero, the
+ * current buffer is complete and the USC is using the next
+ * buffer.
+ */
+ CurrentIndex = NextIndex = info->current_rx_buffer;
+ ++NextIndex;
+ if ( NextIndex == info->rx_buffer_count )
+ NextIndex = 0;
+
+ if ( info->rx_buffer_list[CurrentIndex].status != 0 ||
+ (info->rx_buffer_list[CurrentIndex].count == 0 &&
+ info->rx_buffer_list[NextIndex].count == 0)) {
+ /*
+ * Either the status field of this dma buffer is non-zero
+ * (indicating the last buffer of a receive frame) or the next
+ * buffer is marked as in use -- implying this buffer is complete
+ * and an intermediate buffer for this received frame.
+ */
+
+ status = info->rx_buffer_list[CurrentIndex].status;
+
+ if ( status & (RXSTATUS_SHORT_FRAME + RXSTATUS_OVERRUN +
+ RXSTATUS_CRC_ERROR + RXSTATUS_ABORT) ) {
+ if ( status & RXSTATUS_SHORT_FRAME )
+ info->icount.rxshort++;
+ else if ( status & RXSTATUS_ABORT )
+ info->icount.rxabort++;
+ else if ( status & RXSTATUS_OVERRUN )
+ info->icount.rxover++;
+ else
+ info->icount.rxcrc++;
+ framesize = 0;
+ } else {
+ /*
+ * A receive frame is available, get frame size and status.
+ *
+ * The frame size is the starting value of the RCC (which was
+ * set to 0xffff) minus the ending value of the RCC (decremented
+ * once for each receive character) minus 2 or 4 for the 16-bit
+ * or 32-bit CRC.
+ *
+ * If the status field is zero, this is an intermediate buffer.
+ * It's size is 4K.
+ *
+ * If the DMA Buffer Entry's Status field is non-zero, the
+ * receive operation completed normally (ie: DCD dropped). The
+ * RCC field is valid and holds the received frame size.
+ * It is possible that the RCC field will be zero on a DMA buffer
+ * entry with a non-zero status. This can occur if the total
+ * frame size (number of bytes between the time DCD goes active
+ * to the time DCD goes inactive) exceeds 65535 bytes. In this
+ * case the 16C32 has underrun on the RCC count and appears to
+ * stop updating this counter to let us know the actual received
+ * frame size. If this happens (non-zero status and zero RCC),
+ * simply return the entire RxDMA Buffer
+ */
+ if ( status ) {
+ /*
+ * In the event that the final RxDMA Buffer is
+ * terminated with a non-zero status and the RCC
+ * field is zero, we interpret this as the RCC
+ * having underflowed (received frame > 65535 bytes).
+ *
+ * Signal the event to the user by passing back
+ * a status of RxStatus_CrcError returning the full
+ * buffer and let the app figure out what data is
+ * actually valid
+ */
+ if ( info->rx_buffer_list[CurrentIndex].rcc )
+ framesize = RCLRVALUE - info->rx_buffer_list[CurrentIndex].rcc;
+ else
+ framesize = DMABUFFERSIZE;
+ }
+ else
+ framesize = DMABUFFERSIZE;
+ }
+
+ if ( framesize > DMABUFFERSIZE ) {
+ /*
+ * if running in raw sync mode, ISR handler for
+ * End Of Buffer events terminates all buffers at 4K.
+ * If this frame size is said to be >4K, get the
+ * actual number of bytes of the frame in this buffer.
+ */
+ framesize = framesize % DMABUFFERSIZE;
+ }
+
+
+ if ( debug_level >= DEBUG_LEVEL_BH )
+ printk("%s(%d):mgsl_get_raw_rx_frame(%s) status=%04X size=%d\n",
+ __FILE__,__LINE__,info->device_name,status,framesize);
+
+ if ( debug_level >= DEBUG_LEVEL_DATA )
+ mgsl_trace_block(info,info->rx_buffer_list[CurrentIndex].virt_addr,
+ min_t(int, framesize, DMABUFFERSIZE),0);
+
+ if (framesize) {
+ /* copy dma buffer(s) to contiguous intermediate buffer */
+ /* NOTE: we never copy more than DMABUFFERSIZE bytes */
+
+ pBufEntry = &(info->rx_buffer_list[CurrentIndex]);
+ memcpy( info->intermediate_rxbuffer, pBufEntry->virt_addr, framesize);
+ info->icount.rxok++;
+
+ ldisc_receive_buf(tty, info->intermediate_rxbuffer, info->flag_buf, framesize);
+ }
+
+ /* Free the buffers used by this frame. */
+ mgsl_free_rx_frame_buffers( info, CurrentIndex, CurrentIndex );
+
+ ReturnCode = true;
+ }
+
+
+ if ( info->rx_enabled && info->rx_overflow ) {
+ /* The receiver needs to restarted because of
+ * a receive overflow (buffer or FIFO). If the
+ * receive buffers are now empty, then restart receiver.
+ */
+
+ if ( !info->rx_buffer_list[CurrentIndex].status &&
+ info->rx_buffer_list[CurrentIndex].count ) {
+ spin_lock_irqsave(&info->irq_spinlock,flags);
+ usc_start_receiver(info);
+ spin_unlock_irqrestore(&info->irq_spinlock,flags);
+ }
+ }
+
+ return ReturnCode;
+
+} /* end of mgsl_get_raw_rx_frame() */
+
+/* mgsl_load_tx_dma_buffer()
+ *
+ * Load the transmit DMA buffer with the specified data.
+ *
+ * Arguments:
+ *
+ * info pointer to device extension
+ * Buffer pointer to buffer containing frame to load
+ * BufferSize size in bytes of frame in Buffer
+ *
+ * Return Value: None
+ */
+static void mgsl_load_tx_dma_buffer(struct mgsl_struct *info,
+ const char *Buffer, unsigned int BufferSize)
+{
+ unsigned short Copycount;
+ unsigned int i = 0;
+ DMABUFFERENTRY *pBufEntry;
+
+ if ( debug_level >= DEBUG_LEVEL_DATA )
+ mgsl_trace_block(info,Buffer, min_t(int, BufferSize, DMABUFFERSIZE), 1);
+
+ if (info->params.flags & HDLC_FLAG_HDLC_LOOPMODE) {
+ /* set CMR:13 to start transmit when
+ * next GoAhead (abort) is received
+ */
+ info->cmr_value |= BIT13;
+ }
+
+ /* begin loading the frame in the next available tx dma
+ * buffer, remember it's starting location for setting
+ * up tx dma operation
+ */
+ i = info->current_tx_buffer;
+ info->start_tx_dma_buffer = i;
+
+ /* Setup the status and RCC (Frame Size) fields of the 1st */
+ /* buffer entry in the transmit DMA buffer list. */
+
+ info->tx_buffer_list[i].status = info->cmr_value & 0xf000;
+ info->tx_buffer_list[i].rcc = BufferSize;
+ info->tx_buffer_list[i].count = BufferSize;
+
+ /* Copy frame data from 1st source buffer to the DMA buffers. */
+ /* The frame data may span multiple DMA buffers. */
+
+ while( BufferSize ){
+ /* Get a pointer to next DMA buffer entry. */
+ pBufEntry = &info->tx_buffer_list[i++];
+
+ if ( i == info->tx_buffer_count )
+ i=0;
+
+ /* Calculate the number of bytes that can be copied from */
+ /* the source buffer to this DMA buffer. */
+ if ( BufferSize > DMABUFFERSIZE )
+ Copycount = DMABUFFERSIZE;
+ else
+ Copycount = BufferSize;
+
+ /* Actually copy data from source buffer to DMA buffer. */
+ /* Also set the data count for this individual DMA buffer. */
+ if ( info->bus_type == MGSL_BUS_TYPE_PCI )
+ mgsl_load_pci_memory(pBufEntry->virt_addr, Buffer,Copycount);
+ else
+ memcpy(pBufEntry->virt_addr, Buffer, Copycount);
+
+ pBufEntry->count = Copycount;
+
+ /* Advance source pointer and reduce remaining data count. */
+ Buffer += Copycount;
+ BufferSize -= Copycount;
+
+ ++info->tx_dma_buffers_used;
+ }
+
+ /* remember next available tx dma buffer */
+ info->current_tx_buffer = i;
+
+} /* end of mgsl_load_tx_dma_buffer() */
+
+/*
+ * mgsl_register_test()
+ *
+ * Performs a register test of the 16C32.
+ *
+ * Arguments: info pointer to device instance data
+ * Return Value: true if test passed, otherwise false
+ */
+static bool mgsl_register_test( struct mgsl_struct *info )
+{
+ static unsigned short BitPatterns[] =
+ { 0x0000, 0xffff, 0xaaaa, 0x5555, 0x1234, 0x6969, 0x9696, 0x0f0f };
+ static unsigned int Patterncount = ARRAY_SIZE(BitPatterns);
+ unsigned int i;
+ bool rc = true;
+ unsigned long flags;
+
+ spin_lock_irqsave(&info->irq_spinlock,flags);
+ usc_reset(info);
+
+ /* Verify the reset state of some registers. */
+
+ if ( (usc_InReg( info, SICR ) != 0) ||
+ (usc_InReg( info, IVR ) != 0) ||
+ (usc_InDmaReg( info, DIVR ) != 0) ){
+ rc = false;
+ }
+
+ if ( rc ){
+ /* Write bit patterns to various registers but do it out of */
+ /* sync, then read back and verify values. */
+
+ for ( i = 0 ; i < Patterncount ; i++ ) {
+ usc_OutReg( info, TC0R, BitPatterns[i] );
+ usc_OutReg( info, TC1R, BitPatterns[(i+1)%Patterncount] );
+ usc_OutReg( info, TCLR, BitPatterns[(i+2)%Patterncount] );
+ usc_OutReg( info, RCLR, BitPatterns[(i+3)%Patterncount] );
+ usc_OutReg( info, RSR, BitPatterns[(i+4)%Patterncount] );
+ usc_OutDmaReg( info, TBCR, BitPatterns[(i+5)%Patterncount] );
+
+ if ( (usc_InReg( info, TC0R ) != BitPatterns[i]) ||
+ (usc_InReg( info, TC1R ) != BitPatterns[(i+1)%Patterncount]) ||
+ (usc_InReg( info, TCLR ) != BitPatterns[(i+2)%Patterncount]) ||
+ (usc_InReg( info, RCLR ) != BitPatterns[(i+3)%Patterncount]) ||
+ (usc_InReg( info, RSR ) != BitPatterns[(i+4)%Patterncount]) ||
+ (usc_InDmaReg( info, TBCR ) != BitPatterns[(i+5)%Patterncount]) ){
+ rc = false;
+ break;
+ }
+ }
+ }
+
+ usc_reset(info);
+ spin_unlock_irqrestore(&info->irq_spinlock,flags);
+
+ return rc;
+
+} /* end of mgsl_register_test() */
+
+/* mgsl_irq_test() Perform interrupt test of the 16C32.
+ *
+ * Arguments: info pointer to device instance data
+ * Return Value: true if test passed, otherwise false
+ */
+static bool mgsl_irq_test( struct mgsl_struct *info )
+{
+ unsigned long EndTime;
+ unsigned long flags;
+
+ spin_lock_irqsave(&info->irq_spinlock,flags);
+ usc_reset(info);
+
+ /*
+ * Setup 16C32 to interrupt on TxC pin (14MHz clock) transition.
+ * The ISR sets irq_occurred to true.
+ */
+
+ info->irq_occurred = false;
+
+ /* Enable INTEN gate for ISA adapter (Port 6, Bit12) */
+ /* Enable INTEN (Port 6, Bit12) */
+ /* This connects the IRQ request signal to the ISA bus */
+ /* on the ISA adapter. This has no effect for the PCI adapter */
+ usc_OutReg( info, PCR, (unsigned short)((usc_InReg(info, PCR) | BIT13) & ~BIT12) );
+
+ usc_EnableMasterIrqBit(info);
+ usc_EnableInterrupts(info, IO_PIN);
+ usc_ClearIrqPendingBits(info, IO_PIN);
+
+ usc_UnlatchIostatusBits(info, MISCSTATUS_TXC_LATCHED);
+ usc_EnableStatusIrqs(info, SICR_TXC_ACTIVE + SICR_TXC_INACTIVE);
+
+ spin_unlock_irqrestore(&info->irq_spinlock,flags);
+
+ EndTime=100;
+ while( EndTime-- && !info->irq_occurred ) {
+ msleep_interruptible(10);
+ }
+
+ spin_lock_irqsave(&info->irq_spinlock,flags);
+ usc_reset(info);
+ spin_unlock_irqrestore(&info->irq_spinlock,flags);
+
+ return info->irq_occurred;
+
+} /* end of mgsl_irq_test() */
+
+/* mgsl_dma_test()
+ *
+ * Perform a DMA test of the 16C32. A small frame is
+ * transmitted via DMA from a transmit buffer to a receive buffer
+ * using single buffer DMA mode.
+ *
+ * Arguments: info pointer to device instance data
+ * Return Value: true if test passed, otherwise false
+ */
+static bool mgsl_dma_test( struct mgsl_struct *info )
+{
+ unsigned short FifoLevel;
+ unsigned long phys_addr;
+ unsigned int FrameSize;
+ unsigned int i;
+ char *TmpPtr;
+ bool rc = true;
+ unsigned short status=0;
+ unsigned long EndTime;
+ unsigned long flags;
+ MGSL_PARAMS tmp_params;
+
+ /* save current port options */
+ memcpy(&tmp_params,&info->params,sizeof(MGSL_PARAMS));
+ /* load default port options */
+ memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS));
+
+#define TESTFRAMESIZE 40
+
+ spin_lock_irqsave(&info->irq_spinlock,flags);
+
+ /* setup 16C32 for SDLC DMA transfer mode */
+
+ usc_reset(info);
+ usc_set_sdlc_mode(info);
+ usc_enable_loopback(info,1);
+
+ /* Reprogram the RDMR so that the 16C32 does NOT clear the count
+ * field of the buffer entry after fetching buffer address. This
+ * way we can detect a DMA failure for a DMA read (which should be
+ * non-destructive to system memory) before we try and write to
+ * memory (where a failure could corrupt system memory).
+ */
+
+ /* Receive DMA mode Register (RDMR)
+ *
+ * <15..14> 11 DMA mode = Linked List Buffer mode
+ * <13> 1 RSBinA/L = store Rx status Block in List entry
+ * <12> 0 1 = Clear count of List Entry after fetching
+ * <11..10> 00 Address mode = Increment
+ * <9> 1 Terminate Buffer on RxBound
+ * <8> 0 Bus Width = 16bits
+ * <7..0> ? status Bits (write as 0s)
+ *
+ * 1110 0010 0000 0000 = 0xe200
+ */
+
+ usc_OutDmaReg( info, RDMR, 0xe200 );
+
+ spin_unlock_irqrestore(&info->irq_spinlock,flags);
+
+
+ /* SETUP TRANSMIT AND RECEIVE DMA BUFFERS */
+
+ FrameSize = TESTFRAMESIZE;
+
+ /* setup 1st transmit buffer entry: */
+ /* with frame size and transmit control word */
+
+ info->tx_buffer_list[0].count = FrameSize;
+ info->tx_buffer_list[0].rcc = FrameSize;
+ info->tx_buffer_list[0].status = 0x4000;
+
+ /* build a transmit frame in 1st transmit DMA buffer */
+
+ TmpPtr = info->tx_buffer_list[0].virt_addr;
+ for (i = 0; i < FrameSize; i++ )
+ *TmpPtr++ = i;
+
+ /* setup 1st receive buffer entry: */
+ /* clear status, set max receive buffer size */
+
+ info->rx_buffer_list[0].status = 0;
+ info->rx_buffer_list[0].count = FrameSize + 4;
+
+ /* zero out the 1st receive buffer */
+
+ memset( info->rx_buffer_list[0].virt_addr, 0, FrameSize + 4 );
+
+ /* Set count field of next buffer entries to prevent */
+ /* 16C32 from using buffers after the 1st one. */
+
+ info->tx_buffer_list[1].count = 0;
+ info->rx_buffer_list[1].count = 0;
+
+
+ /***************************/
+ /* Program 16C32 receiver. */
+ /***************************/
+
+ spin_lock_irqsave(&info->irq_spinlock,flags);
+
+ /* setup DMA transfers */
+ usc_RTCmd( info, RTCmd_PurgeRxFifo );
+
+ /* program 16C32 receiver with physical address of 1st DMA buffer entry */
+ phys_addr = info->rx_buffer_list[0].phys_entry;
+ usc_OutDmaReg( info, NRARL, (unsigned short)phys_addr );
+ usc_OutDmaReg( info, NRARU, (unsigned short)(phys_addr >> 16) );
+
+ /* Clear the Rx DMA status bits (read RDMR) and start channel */
+ usc_InDmaReg( info, RDMR );
+ usc_DmaCmd( info, DmaCmd_InitRxChannel );
+
+ /* Enable Receiver (RMR <1..0> = 10) */
+ usc_OutReg( info, RMR, (unsigned short)((usc_InReg(info, RMR) & 0xfffc) | 0x0002) );
+
+ spin_unlock_irqrestore(&info->irq_spinlock,flags);
+
+
+ /*************************************************************/
+ /* WAIT FOR RECEIVER TO DMA ALL PARAMETERS FROM BUFFER ENTRY */
+ /*************************************************************/
+
+ /* Wait 100ms for interrupt. */
+ EndTime = jiffies + msecs_to_jiffies(100);
+
+ for(;;) {
+ if (time_after(jiffies, EndTime)) {
+ rc = false;
+ break;
+ }
+
+ spin_lock_irqsave(&info->irq_spinlock,flags);
+ status = usc_InDmaReg( info, RDMR );
+ spin_unlock_irqrestore(&info->irq_spinlock,flags);
+
+ if ( !(status & BIT4) && (status & BIT5) ) {
+ /* INITG (BIT 4) is inactive (no entry read in progress) AND */
+ /* BUSY (BIT 5) is active (channel still active). */
+ /* This means the buffer entry read has completed. */
+ break;
+ }
+ }
+
+
+ /******************************/
+ /* Program 16C32 transmitter. */
+ /******************************/
+
+ spin_lock_irqsave(&info->irq_spinlock,flags);
+
+ /* Program the Transmit Character Length Register (TCLR) */
+ /* and clear FIFO (TCC is loaded with TCLR on FIFO clear) */
+
+ usc_OutReg( info, TCLR, (unsigned short)info->tx_buffer_list[0].count );
+ usc_RTCmd( info, RTCmd_PurgeTxFifo );
+
+ /* Program the address of the 1st DMA Buffer Entry in linked list */
+
+ phys_addr = info->tx_buffer_list[0].phys_entry;
+ usc_OutDmaReg( info, NTARL, (unsigned short)phys_addr );
+ usc_OutDmaReg( info, NTARU, (unsigned short)(phys_addr >> 16) );
+
+ /* unlatch Tx status bits, and start transmit channel. */
+
+ usc_OutReg( info, TCSR, (unsigned short)(( usc_InReg(info, TCSR) & 0x0f00) | 0xfa) );
+ usc_DmaCmd( info, DmaCmd_InitTxChannel );
+
+ /* wait for DMA controller to fill transmit FIFO */
+
+ usc_TCmd( info, TCmd_SelectTicrTxFifostatus );
+
+ spin_unlock_irqrestore(&info->irq_spinlock,flags);
+
+
+ /**********************************/
+ /* WAIT FOR TRANSMIT FIFO TO FILL */
+ /**********************************/
+
+ /* Wait 100ms */
+ EndTime = jiffies + msecs_to_jiffies(100);
+
+ for(;;) {
+ if (time_after(jiffies, EndTime)) {
+ rc = false;
+ break;
+ }
+
+ spin_lock_irqsave(&info->irq_spinlock,flags);
+ FifoLevel = usc_InReg(info, TICR) >> 8;
+ spin_unlock_irqrestore(&info->irq_spinlock,flags);
+
+ if ( FifoLevel < 16 )
+ break;
+ else
+ if ( FrameSize < 32 ) {
+ /* This frame is smaller than the entire transmit FIFO */
+ /* so wait for the entire frame to be loaded. */
+ if ( FifoLevel <= (32 - FrameSize) )
+ break;
+ }
+ }
+
+
+ if ( rc )
+ {
+ /* Enable 16C32 transmitter. */
+
+ spin_lock_irqsave(&info->irq_spinlock,flags);
+
+ /* Transmit mode Register (TMR), <1..0> = 10, Enable Transmitter */
+ usc_TCmd( info, TCmd_SendFrame );
+ usc_OutReg( info, TMR, (unsigned short)((usc_InReg(info, TMR) & 0xfffc) | 0x0002) );
+
+ spin_unlock_irqrestore(&info->irq_spinlock,flags);
+
+
+ /******************************/
+ /* WAIT FOR TRANSMIT COMPLETE */
+ /******************************/
+
+ /* Wait 100ms */
+ EndTime = jiffies + msecs_to_jiffies(100);
+
+ /* While timer not expired wait for transmit complete */
+
+ spin_lock_irqsave(&info->irq_spinlock,flags);
+ status = usc_InReg( info, TCSR );
+ spin_unlock_irqrestore(&info->irq_spinlock,flags);
+
+ while ( !(status & (BIT6+BIT5+BIT4+BIT2+BIT1)) ) {
+ if (time_after(jiffies, EndTime)) {
+ rc = false;
+ break;
+ }
+
+ spin_lock_irqsave(&info->irq_spinlock,flags);
+ status = usc_InReg( info, TCSR );
+ spin_unlock_irqrestore(&info->irq_spinlock,flags);
+ }
+ }
+
+
+ if ( rc ){
+ /* CHECK FOR TRANSMIT ERRORS */
+ if ( status & (BIT5 + BIT1) )
+ rc = false;
+ }
+
+ if ( rc ) {
+ /* WAIT FOR RECEIVE COMPLETE */
+
+ /* Wait 100ms */
+ EndTime = jiffies + msecs_to_jiffies(100);
+
+ /* Wait for 16C32 to write receive status to buffer entry. */
+ status=info->rx_buffer_list[0].status;
+ while ( status == 0 ) {
+ if (time_after(jiffies, EndTime)) {
+ rc = false;
+ break;
+ }
+ status=info->rx_buffer_list[0].status;
+ }
+ }
+
+
+ if ( rc ) {
+ /* CHECK FOR RECEIVE ERRORS */
+ status = info->rx_buffer_list[0].status;
+
+ if ( status & (BIT8 + BIT3 + BIT1) ) {
+ /* receive error has occurred */
+ rc = false;
+ } else {
+ if ( memcmp( info->tx_buffer_list[0].virt_addr ,
+ info->rx_buffer_list[0].virt_addr, FrameSize ) ){
+ rc = false;
+ }
+ }
+ }
+
+ spin_lock_irqsave(&info->irq_spinlock,flags);
+ usc_reset( info );
+ spin_unlock_irqrestore(&info->irq_spinlock,flags);
+
+ /* restore current port options */
+ memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS));
+
+ return rc;
+
+} /* end of mgsl_dma_test() */
+
+/* mgsl_adapter_test()
+ *
+ * Perform the register, IRQ, and DMA tests for the 16C32.
+ *
+ * Arguments: info pointer to device instance data
+ * Return Value: 0 if success, otherwise -ENODEV
+ */
+static int mgsl_adapter_test( struct mgsl_struct *info )
+{
+ if ( debug_level >= DEBUG_LEVEL_INFO )
+ printk( "%s(%d):Testing device %s\n",
+ __FILE__,__LINE__,info->device_name );
+
+ if ( !mgsl_register_test( info ) ) {
+ info->init_error = DiagStatus_AddressFailure;
+ printk( "%s(%d):Register test failure for device %s Addr=%04X\n",
+ __FILE__,__LINE__,info->device_name, (unsigned short)(info->io_base) );
+ return -ENODEV;
+ }
+
+ if ( !mgsl_irq_test( info ) ) {
+ info->init_error = DiagStatus_IrqFailure;
+ printk( "%s(%d):Interrupt test failure for device %s IRQ=%d\n",
+ __FILE__,__LINE__,info->device_name, (unsigned short)(info->irq_level) );
+ return -ENODEV;
+ }
+
+ if ( !mgsl_dma_test( info ) ) {
+ info->init_error = DiagStatus_DmaFailure;
+ printk( "%s(%d):DMA test failure for device %s DMA=%d\n",
+ __FILE__,__LINE__,info->device_name, (unsigned short)(info->dma_level) );
+ return -ENODEV;
+ }
+
+ if ( debug_level >= DEBUG_LEVEL_INFO )
+ printk( "%s(%d):device %s passed diagnostics\n",
+ __FILE__,__LINE__,info->device_name );
+
+ return 0;
+
+} /* end of mgsl_adapter_test() */
+
+/* mgsl_memory_test()
+ *
+ * Test the shared memory on a PCI adapter.
+ *
+ * Arguments: info pointer to device instance data
+ * Return Value: true if test passed, otherwise false
+ */
+static bool mgsl_memory_test( struct mgsl_struct *info )
+{
+ static unsigned long BitPatterns[] =
+ { 0x0, 0x55555555, 0xaaaaaaaa, 0x66666666, 0x99999999, 0xffffffff, 0x12345678 };
+ unsigned long Patterncount = ARRAY_SIZE(BitPatterns);
+ unsigned long i;
+ unsigned long TestLimit = SHARED_MEM_ADDRESS_SIZE/sizeof(unsigned long);
+ unsigned long * TestAddr;
+
+ if ( info->bus_type != MGSL_BUS_TYPE_PCI )
+ return true;
+
+ TestAddr = (unsigned long *)info->memory_base;
+
+ /* Test data lines with test pattern at one location. */
+
+ for ( i = 0 ; i < Patterncount ; i++ ) {
+ *TestAddr = BitPatterns[i];
+ if ( *TestAddr != BitPatterns[i] )
+ return false;
+ }
+
+ /* Test address lines with incrementing pattern over */
+ /* entire address range. */
+
+ for ( i = 0 ; i < TestLimit ; i++ ) {
+ *TestAddr = i * 4;
+ TestAddr++;
+ }
+
+ TestAddr = (unsigned long *)info->memory_base;
+
+ for ( i = 0 ; i < TestLimit ; i++ ) {
+ if ( *TestAddr != i * 4 )
+ return false;
+ TestAddr++;
+ }
+
+ memset( info->memory_base, 0, SHARED_MEM_ADDRESS_SIZE );
+
+ return true;
+
+} /* End Of mgsl_memory_test() */
+
+
+/* mgsl_load_pci_memory()
+ *
+ * Load a large block of data into the PCI shared memory.
+ * Use this instead of memcpy() or memmove() to move data
+ * into the PCI shared memory.
+ *
+ * Notes:
+ *
+ * This function prevents the PCI9050 interface chip from hogging
+ * the adapter local bus, which can starve the 16C32 by preventing
+ * 16C32 bus master cycles.
+ *
+ * The PCI9050 documentation says that the 9050 will always release
+ * control of the local bus after completing the current read
+ * or write operation.
+ *
+ * It appears that as long as the PCI9050 write FIFO is full, the
+ * PCI9050 treats all of the writes as a single burst transaction
+ * and will not release the bus. This causes DMA latency problems
+ * at high speeds when copying large data blocks to the shared
+ * memory.
+ *
+ * This function in effect, breaks the a large shared memory write
+ * into multiple transations by interleaving a shared memory read
+ * which will flush the write FIFO and 'complete' the write
+ * transation. This allows any pending DMA request to gain control
+ * of the local bus in a timely fasion.
+ *
+ * Arguments:
+ *
+ * TargetPtr pointer to target address in PCI shared memory
+ * SourcePtr pointer to source buffer for data
+ * count count in bytes of data to copy
+ *
+ * Return Value: None
+ */
+static void mgsl_load_pci_memory( char* TargetPtr, const char* SourcePtr,
+ unsigned short count )
+{
+ /* 16 32-bit writes @ 60ns each = 960ns max latency on local bus */
+#define PCI_LOAD_INTERVAL 64
+
+ unsigned short Intervalcount = count / PCI_LOAD_INTERVAL;
+ unsigned short Index;
+ unsigned long Dummy;
+
+ for ( Index = 0 ; Index < Intervalcount ; Index++ )
+ {
+ memcpy(TargetPtr, SourcePtr, PCI_LOAD_INTERVAL);
+ Dummy = *((volatile unsigned long *)TargetPtr);
+ TargetPtr += PCI_LOAD_INTERVAL;
+ SourcePtr += PCI_LOAD_INTERVAL;
+ }
+
+ memcpy( TargetPtr, SourcePtr, count % PCI_LOAD_INTERVAL );
+
+} /* End Of mgsl_load_pci_memory() */
+
+static void mgsl_trace_block(struct mgsl_struct *info,const char* data, int count, int xmit)
+{
+ int i;
+ int linecount;
+ if (xmit)
+ printk("%s tx data:\n",info->device_name);
+ else
+ printk("%s rx data:\n",info->device_name);
+
+ while(count) {
+ if (count > 16)
+ linecount = 16;
+ else
+ linecount = count;
+
+ for(i=0;i<linecount;i++)
+ printk("%02X ",(unsigned char)data[i]);
+ for(;i<17;i++)
+ printk(" ");
+ for(i=0;i<linecount;i++) {
+ if (data[i]>=040 && data[i]<=0176)
+ printk("%c",data[i]);
+ else
+ printk(".");
+ }
+ printk("\n");
+
+ data += linecount;
+ count -= linecount;
+ }
+} /* end of mgsl_trace_block() */
+
+/* mgsl_tx_timeout()
+ *
+ * called when HDLC frame times out
+ * update stats and do tx completion processing
+ *
+ * Arguments: context pointer to device instance data
+ * Return Value: None
+ */
+static void mgsl_tx_timeout(unsigned long context)
+{
+ struct mgsl_struct *info = (struct mgsl_struct*)context;
+ unsigned long flags;
+
+ if ( debug_level >= DEBUG_LEVEL_INFO )
+ printk( "%s(%d):mgsl_tx_timeout(%s)\n",
+ __FILE__,__LINE__,info->device_name);
+ if(info->tx_active &&
+ (info->params.mode == MGSL_MODE_HDLC ||
+ info->params.mode == MGSL_MODE_RAW) ) {
+ info->icount.txtimeout++;
+ }
+ spin_lock_irqsave(&info->irq_spinlock,flags);
+ info->tx_active = false;
+ info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
+
+ if ( info->params.flags & HDLC_FLAG_HDLC_LOOPMODE )
+ usc_loopmode_cancel_transmit( info );
+
+ spin_unlock_irqrestore(&info->irq_spinlock,flags);
+
+#if SYNCLINK_GENERIC_HDLC
+ if (info->netcount)
+ hdlcdev_tx_done(info);
+ else
+#endif
+ mgsl_bh_transmit(info);
+
+} /* end of mgsl_tx_timeout() */
+
+/* signal that there are no more frames to send, so that
+ * line is 'released' by echoing RxD to TxD when current
+ * transmission is complete (or immediately if no tx in progress).
+ */
+static int mgsl_loopmode_send_done( struct mgsl_struct * info )
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&info->irq_spinlock,flags);
+ if (info->params.flags & HDLC_FLAG_HDLC_LOOPMODE) {
+ if (info->tx_active)
+ info->loopmode_send_done_requested = true;
+ else
+ usc_loopmode_send_done(info);
+ }
+ spin_unlock_irqrestore(&info->irq_spinlock,flags);
+
+ return 0;
+}
+
+/* release the line by echoing RxD to TxD
+ * upon completion of a transmit frame
+ */
+static void usc_loopmode_send_done( struct mgsl_struct * info )
+{
+ info->loopmode_send_done_requested = false;
+ /* clear CMR:13 to 0 to start echoing RxData to TxData */
+ info->cmr_value &= ~BIT13;
+ usc_OutReg(info, CMR, info->cmr_value);
+}
+
+/* abort a transmit in progress while in HDLC LoopMode
+ */
+static void usc_loopmode_cancel_transmit( struct mgsl_struct * info )
+{
+ /* reset tx dma channel and purge TxFifo */
+ usc_RTCmd( info, RTCmd_PurgeTxFifo );
+ usc_DmaCmd( info, DmaCmd_ResetTxChannel );
+ usc_loopmode_send_done( info );
+}
+
+/* for HDLC/SDLC LoopMode, setting CMR:13 after the transmitter is enabled
+ * is an Insert Into Loop action. Upon receipt of a GoAhead sequence (RxAbort)
+ * we must clear CMR:13 to begin repeating TxData to RxData
+ */
+static void usc_loopmode_insert_request( struct mgsl_struct * info )
+{
+ info->loopmode_insert_requested = true;
+
+ /* enable RxAbort irq. On next RxAbort, clear CMR:13 to
+ * begin repeating TxData on RxData (complete insertion)
+ */
+ usc_OutReg( info, RICR,
+ (usc_InReg( info, RICR ) | RXSTATUS_ABORT_RECEIVED ) );
+
+ /* set CMR:13 to insert into loop on next GoAhead (RxAbort) */
+ info->cmr_value |= BIT13;
+ usc_OutReg(info, CMR, info->cmr_value);
+}
+
+/* return 1 if station is inserted into the loop, otherwise 0
+ */
+static int usc_loopmode_active( struct mgsl_struct * info)
+{
+ return usc_InReg( info, CCSR ) & BIT7 ? 1 : 0 ;
+}
+
+#if SYNCLINK_GENERIC_HDLC
+
+/**
+ * called by generic HDLC layer when protocol selected (PPP, frame relay, etc.)
+ * set encoding and frame check sequence (FCS) options
+ *
+ * dev pointer to network device structure
+ * encoding serial encoding setting
+ * parity FCS setting
+ *
+ * returns 0 if success, otherwise error code
+ */
+static int hdlcdev_attach(struct net_device *dev, unsigned short encoding,
+ unsigned short parity)
+{
+ struct mgsl_struct *info = dev_to_port(dev);
+ unsigned char new_encoding;
+ unsigned short new_crctype;
+
+ /* return error if TTY interface open */
+ if (info->port.count)
+ return -EBUSY;
+
+ switch (encoding)
+ {
+ case ENCODING_NRZ: new_encoding = HDLC_ENCODING_NRZ; break;
+ case ENCODING_NRZI: new_encoding = HDLC_ENCODING_NRZI_SPACE; break;
+ case ENCODING_FM_MARK: new_encoding = HDLC_ENCODING_BIPHASE_MARK; break;
+ case ENCODING_FM_SPACE: new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break;
+ case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break;
+ default: return -EINVAL;
+ }
+
+ switch (parity)
+ {
+ case PARITY_NONE: new_crctype = HDLC_CRC_NONE; break;
+ case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break;
+ case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break;
+ default: return -EINVAL;
+ }
+
+ info->params.encoding = new_encoding;
+ info->params.crc_type = new_crctype;
+
+ /* if network interface up, reprogram hardware */
+ if (info->netcount)
+ mgsl_program_hw(info);
+
+ return 0;
+}
+
+/**
+ * called by generic HDLC layer to send frame
+ *
+ * skb socket buffer containing HDLC frame
+ * dev pointer to network device structure
+ */
+static netdev_tx_t hdlcdev_xmit(struct sk_buff *skb,
+ struct net_device *dev)
+{
+ struct mgsl_struct *info = dev_to_port(dev);
+ unsigned long flags;
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk(KERN_INFO "%s:hdlc_xmit(%s)\n",__FILE__,dev->name);
+
+ /* stop sending until this frame completes */
+ netif_stop_queue(dev);
+
+ /* copy data to device buffers */
+ info->xmit_cnt = skb->len;
+ mgsl_load_tx_dma_buffer(info, skb->data, skb->len);
+
+ /* update network statistics */
+ dev->stats.tx_packets++;
+ dev->stats.tx_bytes += skb->len;
+
+ /* done with socket buffer, so free it */
+ dev_kfree_skb(skb);
+
+ /* save start time for transmit timeout detection */
+ dev->trans_start = jiffies;
+
+ /* start hardware transmitter if necessary */
+ spin_lock_irqsave(&info->irq_spinlock,flags);
+ if (!info->tx_active)
+ usc_start_transmitter(info);
+ spin_unlock_irqrestore(&info->irq_spinlock,flags);
+
+ return NETDEV_TX_OK;
+}
+
+/**
+ * called by network layer when interface enabled
+ * claim resources and initialize hardware
+ *
+ * dev pointer to network device structure
+ *
+ * returns 0 if success, otherwise error code
+ */
+static int hdlcdev_open(struct net_device *dev)
+{
+ struct mgsl_struct *info = dev_to_port(dev);
+ int rc;
+ unsigned long flags;
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s:hdlcdev_open(%s)\n",__FILE__,dev->name);
+
+ /* generic HDLC layer open processing */
+ if ((rc = hdlc_open(dev)))
+ return rc;
+
+ /* arbitrate between network and tty opens */
+ spin_lock_irqsave(&info->netlock, flags);
+ if (info->port.count != 0 || info->netcount != 0) {
+ printk(KERN_WARNING "%s: hdlc_open returning busy\n", dev->name);
+ spin_unlock_irqrestore(&info->netlock, flags);
+ return -EBUSY;
+ }
+ info->netcount=1;
+ spin_unlock_irqrestore(&info->netlock, flags);
+
+ /* claim resources and init adapter */
+ if ((rc = startup(info)) != 0) {
+ spin_lock_irqsave(&info->netlock, flags);
+ info->netcount=0;
+ spin_unlock_irqrestore(&info->netlock, flags);
+ return rc;
+ }
+
+ /* assert DTR and RTS, apply hardware settings */
+ info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
+ mgsl_program_hw(info);
+
+ /* enable network layer transmit */
+ dev->trans_start = jiffies;
+ netif_start_queue(dev);
+
+ /* inform generic HDLC layer of current DCD status */
+ spin_lock_irqsave(&info->irq_spinlock, flags);
+ usc_get_serial_signals(info);
+ spin_unlock_irqrestore(&info->irq_spinlock, flags);
+ if (info->serial_signals & SerialSignal_DCD)
+ netif_carrier_on(dev);
+ else
+ netif_carrier_off(dev);
+ return 0;
+}
+
+/**
+ * called by network layer when interface is disabled
+ * shutdown hardware and release resources
+ *
+ * dev pointer to network device structure
+ *
+ * returns 0 if success, otherwise error code
+ */
+static int hdlcdev_close(struct net_device *dev)
+{
+ struct mgsl_struct *info = dev_to_port(dev);
+ unsigned long flags;
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s:hdlcdev_close(%s)\n",__FILE__,dev->name);
+
+ netif_stop_queue(dev);
+
+ /* shutdown adapter and release resources */
+ shutdown(info);
+
+ hdlc_close(dev);
+
+ spin_lock_irqsave(&info->netlock, flags);
+ info->netcount=0;
+ spin_unlock_irqrestore(&info->netlock, flags);
+
+ return 0;
+}
+
+/**
+ * called by network layer to process IOCTL call to network device
+ *
+ * dev pointer to network device structure
+ * ifr pointer to network interface request structure
+ * cmd IOCTL command code
+ *
+ * returns 0 if success, otherwise error code
+ */
+static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+ const size_t size = sizeof(sync_serial_settings);
+ sync_serial_settings new_line;
+ sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
+ struct mgsl_struct *info = dev_to_port(dev);
+ unsigned int flags;
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("%s:hdlcdev_ioctl(%s)\n",__FILE__,dev->name);
+
+ /* return error if TTY interface open */
+ if (info->port.count)
+ return -EBUSY;
+
+ if (cmd != SIOCWANDEV)
+ return hdlc_ioctl(dev, ifr, cmd);
+
+ switch(ifr->ifr_settings.type) {
+ case IF_GET_IFACE: /* return current sync_serial_settings */
+
+ ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL;
+ if (ifr->ifr_settings.size < size) {
+ ifr->ifr_settings.size = size; /* data size wanted */
+ return -ENOBUFS;
+ }
+
+ flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
+ HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
+ HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
+ HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN);
+
+ switch (flags){
+ case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break;
+ case (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_INT; break;
+ case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_TXINT; break;
+ case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break;
+ default: new_line.clock_type = CLOCK_DEFAULT;
+ }
+
+ new_line.clock_rate = info->params.clock_speed;
+ new_line.loopback = info->params.loopback ? 1:0;
+
+ if (copy_to_user(line, &new_line, size))
+ return -EFAULT;
+ return 0;
+
+ case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */
+
+ if(!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ if (copy_from_user(&new_line, line, size))
+ return -EFAULT;
+
+ switch (new_line.clock_type)
+ {
+ case CLOCK_EXT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break;
+ case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break;
+ case CLOCK_INT: flags = HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG; break;
+ case CLOCK_TXINT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG; break;
+ case CLOCK_DEFAULT: flags = info->params.flags &
+ (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
+ HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
+ HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
+ HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); break;
+ default: return -EINVAL;
+ }
+
+ if (new_line.loopback != 0 && new_line.loopback != 1)
+ return -EINVAL;
+
+ info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
+ HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
+ HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
+ HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN);
+ info->params.flags |= flags;
+
+ info->params.loopback = new_line.loopback;
+
+ if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG))
+ info->params.clock_speed = new_line.clock_rate;
+ else
+ info->params.clock_speed = 0;
+
+ /* if network interface up, reprogram hardware */
+ if (info->netcount)
+ mgsl_program_hw(info);
+ return 0;
+
+ default:
+ return hdlc_ioctl(dev, ifr, cmd);
+ }
+}
+
+/**
+ * called by network layer when transmit timeout is detected
+ *
+ * dev pointer to network device structure
+ */
+static void hdlcdev_tx_timeout(struct net_device *dev)
+{
+ struct mgsl_struct *info = dev_to_port(dev);
+ unsigned long flags;
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("hdlcdev_tx_timeout(%s)\n",dev->name);
+
+ dev->stats.tx_errors++;
+ dev->stats.tx_aborted_errors++;
+
+ spin_lock_irqsave(&info->irq_spinlock,flags);
+ usc_stop_transmitter(info);
+ spin_unlock_irqrestore(&info->irq_spinlock,flags);
+
+ netif_wake_queue(dev);
+}
+
+/**
+ * called by device driver when transmit completes
+ * reenable network layer transmit if stopped
+ *
+ * info pointer to device instance information
+ */
+static void hdlcdev_tx_done(struct mgsl_struct *info)
+{
+ if (netif_queue_stopped(info->netdev))
+ netif_wake_queue(info->netdev);
+}
+
+/**
+ * called by device driver when frame received
+ * pass frame to network layer
+ *
+ * info pointer to device instance information
+ * buf pointer to buffer contianing frame data
+ * size count of data bytes in buf
+ */
+static void hdlcdev_rx(struct mgsl_struct *info, char *buf, int size)
+{
+ struct sk_buff *skb = dev_alloc_skb(size);
+ struct net_device *dev = info->netdev;
+
+ if (debug_level >= DEBUG_LEVEL_INFO)
+ printk("hdlcdev_rx(%s)\n", dev->name);
+
+ if (skb == NULL) {
+ printk(KERN_NOTICE "%s: can't alloc skb, dropping packet\n",
+ dev->name);
+ dev->stats.rx_dropped++;
+ return;
+ }
+
+ memcpy(skb_put(skb, size), buf, size);
+
+ skb->protocol = hdlc_type_trans(skb, dev);
+
+ dev->stats.rx_packets++;
+ dev->stats.rx_bytes += size;
+
+ netif_rx(skb);
+}
+
+static const struct net_device_ops hdlcdev_ops = {
+ .ndo_open = hdlcdev_open,
+ .ndo_stop = hdlcdev_close,
+ .ndo_change_mtu = hdlc_change_mtu,
+ .ndo_start_xmit = hdlc_start_xmit,
+ .ndo_do_ioctl = hdlcdev_ioctl,
+ .ndo_tx_timeout = hdlcdev_tx_timeout,
+};
+
+/**
+ * called by device driver when adding device instance
+ * do generic HDLC initialization
+ *
+ * info pointer to device instance information
+ *
+ * returns 0 if success, otherwise error code
+ */
+static int hdlcdev_init(struct mgsl_struct *info)
+{
+ int rc;
+ struct net_device *dev;
+ hdlc_device *hdlc;
+
+ /* allocate and initialize network and HDLC layer objects */
+
+ if (!(dev = alloc_hdlcdev(info))) {
+ printk(KERN_ERR "%s:hdlc device allocation failure\n",__FILE__);
+ return -ENOMEM;
+ }
+
+ /* for network layer reporting purposes only */
+ dev->base_addr = info->io_base;
+ dev->irq = info->irq_level;
+ dev->dma = info->dma_level;
+
+ /* network layer callbacks and settings */
+ dev->netdev_ops = &hdlcdev_ops;
+ dev->watchdog_timeo = 10 * HZ;
+ dev->tx_queue_len = 50;
+
+ /* generic HDLC layer callbacks and settings */
+ hdlc = dev_to_hdlc(dev);
+ hdlc->attach = hdlcdev_attach;
+ hdlc->xmit = hdlcdev_xmit;
+
+ /* register objects with HDLC layer */
+ if ((rc = register_hdlc_device(dev))) {
+ printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__);
+ free_netdev(dev);
+ return rc;
+ }
+
+ info->netdev = dev;
+ return 0;
+}
+
+/**
+ * called by device driver when removing device instance
+ * do generic HDLC cleanup
+ *
+ * info pointer to device instance information
+ */
+static void hdlcdev_exit(struct mgsl_struct *info)
+{
+ unregister_hdlc_device(info->netdev);
+ free_netdev(info->netdev);
+ info->netdev = NULL;
+}
+
+#endif /* CONFIG_HDLC */
+
+
+static int __devinit synclink_init_one (struct pci_dev *dev,
+ const struct pci_device_id *ent)
+{
+ struct mgsl_struct *info;
+
+ if (pci_enable_device(dev)) {
+ printk("error enabling pci device %p\n", dev);
+ return -EIO;
+ }
+
+ if (!(info = mgsl_allocate_device())) {
+ printk("can't allocate device instance data.\n");
+ return -EIO;
+ }
+
+ /* Copy user configuration info to device instance data */
+
+ info->io_base = pci_resource_start(dev, 2);
+ info->irq_level = dev->irq;
+ info->phys_memory_base = pci_resource_start(dev, 3);
+
+ /* Because veremap only works on page boundaries we must map
+ * a larger area than is actually implemented for the LCR
+ * memory range. We map a full page starting at the page boundary.
+ */
+ info->phys_lcr_base = pci_resource_start(dev, 0);
+ info->lcr_offset = info->phys_lcr_base & (PAGE_SIZE-1);
+ info->phys_lcr_base &= ~(PAGE_SIZE-1);
+
+ info->bus_type = MGSL_BUS_TYPE_PCI;
+ info->io_addr_size = 8;
+ info->irq_flags = IRQF_SHARED;
+
+ if (dev->device == 0x0210) {
+ /* Version 1 PCI9030 based universal PCI adapter */
+ info->misc_ctrl_value = 0x007c4080;
+ info->hw_version = 1;
+ } else {
+ /* Version 0 PCI9050 based 5V PCI adapter
+ * A PCI9050 bug prevents reading LCR registers if
+ * LCR base address bit 7 is set. Maintain shadow
+ * value so we can write to LCR misc control reg.
+ */
+ info->misc_ctrl_value = 0x087e4546;
+ info->hw_version = 0;
+ }
+
+ mgsl_add_device(info);
+
+ return 0;
+}
+
+static void __devexit synclink_remove_one (struct pci_dev *dev)
+{
+}
+