diff options
Diffstat (limited to 'drivers/usb/dwc3/gadget.c')
| -rw-r--r-- | drivers/usb/dwc3/gadget.c | 101 |
1 files changed, 58 insertions, 43 deletions
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index d2bd28dc28b6..01cd7ddc9981 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -1827,49 +1827,6 @@ static int __dwc3_gadget_start(struct dwc3 *dwc) dwc3_writel(dwc->regs, DWC3_DEV_IMOD(0), 0); } - reg = dwc3_readl(dwc->regs, DWC3_DCFG); - reg &= ~(DWC3_DCFG_SPEED_MASK); - - /* - * WORKAROUND: DWC3 revision < 2.20a have an issue - * which would cause metastability state on Run/Stop - * bit if we try to force the IP to USB2-only mode. - * - * Because of that, we cannot configure the IP to any - * speed other than the SuperSpeed - * - * Refers to: - * - * STAR#9000525659: Clock Domain Crossing on DCTL in - * USB 2.0 Mode - */ - if (dwc->revision < DWC3_REVISION_220A) { - reg |= DWC3_DCFG_SUPERSPEED; - } else { - switch (dwc->maximum_speed) { - case USB_SPEED_LOW: - reg |= DWC3_DCFG_LOWSPEED; - break; - case USB_SPEED_FULL: - reg |= DWC3_DCFG_FULLSPEED; - break; - case USB_SPEED_HIGH: - reg |= DWC3_DCFG_HIGHSPEED; - break; - case USB_SPEED_SUPER_PLUS: - reg |= DWC3_DCFG_SUPERSPEED_PLUS; - break; - default: - dev_err(dwc->dev, "invalid dwc->maximum_speed (%d)\n", - dwc->maximum_speed); - /* fall through */ - case USB_SPEED_SUPER: - reg |= DWC3_DCFG_SUPERSPEED; - break; - } - } - dwc3_writel(dwc->regs, DWC3_DCFG, reg); - /* * We are telling dwc3 that we want to use DCFG.NUMP as ACK TP's NUMP * field instead of letting dwc3 itself calculate that automatically. @@ -2001,6 +1958,63 @@ out: return 0; } +static void dwc3_gadget_set_speed(struct usb_gadget *g, + enum usb_device_speed speed) +{ + struct dwc3 *dwc = gadget_to_dwc(g); + unsigned long flags; + u32 reg; + + spin_lock_irqsave(&dwc->lock, flags); + reg = dwc3_readl(dwc->regs, DWC3_DCFG); + reg &= ~(DWC3_DCFG_SPEED_MASK); + + /* + * WORKAROUND: DWC3 revision < 2.20a have an issue + * which would cause metastability state on Run/Stop + * bit if we try to force the IP to USB2-only mode. + * + * Because of that, we cannot configure the IP to any + * speed other than the SuperSpeed + * + * Refers to: + * + * STAR#9000525659: Clock Domain Crossing on DCTL in + * USB 2.0 Mode + */ + if (dwc->revision < DWC3_REVISION_220A) { + reg |= DWC3_DCFG_SUPERSPEED; + } else { + switch (speed) { + case USB_SPEED_LOW: + reg |= DWC3_DCFG_LOWSPEED; + break; + case USB_SPEED_FULL: + reg |= DWC3_DCFG_FULLSPEED; + break; + case USB_SPEED_HIGH: + reg |= DWC3_DCFG_HIGHSPEED; + break; + case USB_SPEED_SUPER: + reg |= DWC3_DCFG_SUPERSPEED; + break; + case USB_SPEED_SUPER_PLUS: + reg |= DWC3_DCFG_SUPERSPEED_PLUS; + break; + default: + dev_err(dwc->dev, "invalid speed (%d)\n", speed); + + if (dwc->revision & DWC3_REVISION_IS_DWC31) + reg |= DWC3_DCFG_SUPERSPEED_PLUS; + else + reg |= DWC3_DCFG_SUPERSPEED; + } + } + dwc3_writel(dwc->regs, DWC3_DCFG, reg); + + spin_unlock_irqrestore(&dwc->lock, flags); +} + static const struct usb_gadget_ops dwc3_gadget_ops = { .get_frame = dwc3_gadget_get_frame, .wakeup = dwc3_gadget_wakeup, @@ -2008,6 +2022,7 @@ static const struct usb_gadget_ops dwc3_gadget_ops = { .pullup = dwc3_gadget_pullup, .udc_start = dwc3_gadget_start, .udc_stop = dwc3_gadget_stop, + .udc_set_speed = dwc3_gadget_set_speed, }; /* -------------------------------------------------------------------------- */ |