1 files changed, 177 insertions, 102 deletions

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index cf5b4f49c3ed..c0ca4d12f95d 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -139,6 +139,24 @@ int dwc3_gadget_set_link_state(struct dwc3 *dwc, enum dwc3_link_state state)
 	return -ETIMEDOUT;
 }
 
+static void dwc3_ep0_reset_state(struct dwc3 *dwc)
+{
+	unsigned int	dir;
+
+	if (dwc->ep0state != EP0_SETUP_PHASE) {
+		dir = !!dwc->ep0_expect_in;
+		if (dwc->ep0state == EP0_DATA_PHASE)
+			dwc3_ep0_end_control_data(dwc, dwc->eps[dir]);
+		else
+			dwc3_ep0_end_control_data(dwc, dwc->eps[!dir]);
+
+		dwc->eps[0]->trb_enqueue = 0;
+		dwc->eps[1]->trb_enqueue = 0;
+
+		dwc3_ep0_stall_and_restart(dwc);
+	}
+}
+
 /**
  * dwc3_ep_inc_trb - increment a trb index.
  * @index: Pointer to the TRB index to increment.
@@ -258,7 +276,7 @@ int dwc3_send_gadget_generic_command(struct dwc3 *dwc, unsigned int cmd,
 	return ret;
 }
 
-static int __dwc3_gadget_wakeup(struct dwc3 *dwc);
+static int __dwc3_gadget_wakeup(struct dwc3 *dwc, bool async);
 
 /**
  * dwc3_send_gadget_ep_cmd - issue an endpoint command
@@ -325,7 +343,7 @@ int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned int cmd,
 
 			fallthrough;
 		case DWC3_LINK_STATE_U3:
-			ret = __dwc3_gadget_wakeup(dwc);
+			ret = __dwc3_gadget_wakeup(dwc, false);
 			dev_WARN_ONCE(dwc->dev, ret, "wakeup failed --> %d\n",
 					ret);
 			break;
@@ -2273,6 +2291,22 @@ static const struct usb_ep_ops dwc3_gadget_ep_ops = {
 
 /* -------------------------------------------------------------------------- */
 
+static void dwc3_gadget_enable_linksts_evts(struct dwc3 *dwc, bool set)
+{
+	u32 reg;
+
+	if (DWC3_VER_IS_PRIOR(DWC3, 250A))
+		return;
+
+	reg = dwc3_readl(dwc->regs, DWC3_DEVTEN);
+	if (set)
+		reg |= DWC3_DEVTEN_ULSTCNGEN;
+	else
+		reg &= ~DWC3_DEVTEN_ULSTCNGEN;
+
+	dwc3_writel(dwc->regs, DWC3_DEVTEN, reg);
+}
+
 static int dwc3_gadget_get_frame(struct usb_gadget *g)
 {
 	struct dwc3		*dwc = gadget_to_dwc(g);
@@ -2280,7 +2314,7 @@ static int dwc3_gadget_get_frame(struct usb_gadget *g)
 	return __dwc3_gadget_get_frame(dwc);
 }
 
-static int __dwc3_gadget_wakeup(struct dwc3 *dwc)
+static int __dwc3_gadget_wakeup(struct dwc3 *dwc, bool async)
 {
 	int			retries;
 
@@ -2311,9 +2345,13 @@ static int __dwc3_gadget_wakeup(struct dwc3 *dwc)
 		return -EINVAL;
 	}
 
+	if (async)
+		dwc3_gadget_enable_linksts_evts(dwc, true);
+
 	ret = dwc3_gadget_set_link_state(dwc, DWC3_LINK_STATE_RECOV);
 	if (ret < 0) {
 		dev_err(dwc->dev, "failed to put link in Recovery\n");
+		dwc3_gadget_enable_linksts_evts(dwc, false);
 		return ret;
 	}
 
@@ -2325,6 +2363,13 @@ static int __dwc3_gadget_wakeup(struct dwc3 *dwc)
 		dwc3_writel(dwc->regs, DWC3_DCTL, reg);
 	}
 
+	/*
+	 * Since link status change events are enabled we will receive
+	 * an U0 event when wakeup is successful. So bail out.
+	 */
+	if (async)
+		return 0;
+
 	/* poll until Link State changes to ON */
 	retries = 20000;
 
@@ -2350,13 +2395,77 @@ static int dwc3_gadget_wakeup(struct usb_gadget *g)
 	unsigned long		flags;
 	int			ret;
 
+	if (!dwc->wakeup_configured) {
+		dev_err(dwc->dev, "remote wakeup not configured\n");
+		return -EINVAL;
+	}
+
 	spin_lock_irqsave(&dwc->lock, flags);
-	ret = __dwc3_gadget_wakeup(dwc);
+	if (!dwc->gadget->wakeup_armed) {
+		dev_err(dwc->dev, "not armed for remote wakeup\n");
+		spin_unlock_irqrestore(&dwc->lock, flags);
+		return -EINVAL;
+	}
+	ret = __dwc3_gadget_wakeup(dwc, true);
+
 	spin_unlock_irqrestore(&dwc->lock, flags);
 
 	return ret;
 }
 
+static void dwc3_resume_gadget(struct dwc3 *dwc);
+
+static int dwc3_gadget_func_wakeup(struct usb_gadget *g, int intf_id)
+{
+	struct  dwc3		*dwc = gadget_to_dwc(g);
+	unsigned long		flags;
+	int			ret;
+	int			link_state;
+
+	if (!dwc->wakeup_configured) {
+		dev_err(dwc->dev, "remote wakeup not configured\n");
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(&dwc->lock, flags);
+	/*
+	 * If the link is in U3, signal for remote wakeup and wait for the
+	 * link to transition to U0 before sending device notification.
+	 */
+	link_state = dwc3_gadget_get_link_state(dwc);
+	if (link_state == DWC3_LINK_STATE_U3) {
+		ret = __dwc3_gadget_wakeup(dwc, false);
+		if (ret) {
+			spin_unlock_irqrestore(&dwc->lock, flags);
+			return -EINVAL;
+		}
+		dwc3_resume_gadget(dwc);
+		dwc->link_state = DWC3_LINK_STATE_U0;
+	}
+
+	ret = dwc3_send_gadget_generic_command(dwc, DWC3_DGCMD_DEV_NOTIFICATION,
+					       DWC3_DGCMDPAR_DN_FUNC_WAKE |
+					       DWC3_DGCMDPAR_INTF_SEL(intf_id));
+	if (ret)
+		dev_err(dwc->dev, "function remote wakeup failed, ret:%d\n", ret);
+
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	return ret;
+}
+
+static int dwc3_gadget_set_remote_wakeup(struct usb_gadget *g, int set)
+{
+	struct dwc3		*dwc = gadget_to_dwc(g);
+	unsigned long		flags;
+
+	spin_lock_irqsave(&dwc->lock, flags);
+	dwc->wakeup_configured = !!set;
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	return 0;
+}
+
 static int dwc3_gadget_set_selfpowered(struct usb_gadget *g,
 		int is_selfpowered)
 {
@@ -2478,7 +2587,7 @@ static void __dwc3_gadget_set_speed(struct dwc3 *dwc)
 	dwc3_writel(dwc->regs, DWC3_DCFG, reg);
 }
 
-static int dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on, int suspend)
+static int dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on)
 {
 	u32			reg;
 	u32			timeout = 2000;
@@ -2497,17 +2606,11 @@ static int dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on, int suspend)
 			reg &= ~DWC3_DCTL_KEEP_CONNECT;
 		reg |= DWC3_DCTL_RUN_STOP;
 
-		if (dwc->has_hibernation)
-			reg |= DWC3_DCTL_KEEP_CONNECT;
-
 		__dwc3_gadget_set_speed(dwc);
 		dwc->pullups_connected = true;
 	} else {
 		reg &= ~DWC3_DCTL_RUN_STOP;
 
-		if (dwc->has_hibernation && !suspend)
-			reg &= ~DWC3_DCTL_KEEP_CONNECT;
-
 		dwc->pullups_connected = false;
 	}
 
@@ -2532,29 +2635,17 @@ static int __dwc3_gadget_start(struct dwc3 *dwc);
 static int dwc3_gadget_soft_disconnect(struct dwc3 *dwc)
 {
 	unsigned long flags;
+	int ret;
 
 	spin_lock_irqsave(&dwc->lock, flags);
 	dwc->connected = false;
 
 	/*
-	 * Per databook, when we want to stop the gadget, if a control transfer
-	 * is still in process, complete it and get the core into setup phase.
+	 * Attempt to end pending SETUP status phase, and not wait for the
+	 * function to do so.
 	 */
-	if (dwc->ep0state != EP0_SETUP_PHASE) {
-		int ret;
-
-		if (dwc->delayed_status)
-			dwc3_ep0_send_delayed_status(dwc);
-
-		reinit_completion(&dwc->ep0_in_setup);
-
-		spin_unlock_irqrestore(&dwc->lock, flags);
-		ret = wait_for_completion_timeout(&dwc->ep0_in_setup,
-				msecs_to_jiffies(DWC3_PULL_UP_TIMEOUT));
-		spin_lock_irqsave(&dwc->lock, flags);
-		if (ret == 0)
-			dev_warn(dwc->dev, "timed out waiting for SETUP phase\n");
-	}
+	if (dwc->delayed_status)
+		dwc3_ep0_send_delayed_status(dwc);
 
 	/*
 	 * In the Synopsys DesignWare Cores USB3 Databook Rev. 3.30a
@@ -2564,17 +2655,48 @@ static int dwc3_gadget_soft_disconnect(struct dwc3 *dwc)
 	 * bit.
 	 */
 	dwc3_stop_active_transfers(dwc);
-	__dwc3_gadget_stop(dwc);
 	spin_unlock_irqrestore(&dwc->lock, flags);
 
 	/*
+	 * Per databook, when we want to stop the gadget, if a control transfer
+	 * is still in process, complete it and get the core into setup phase.
+	 * In case the host is unresponsive to a SETUP transaction, forcefully
+	 * stall the transfer, and move back to the SETUP phase, so that any
+	 * pending endxfers can be executed.
+	 */
+	if (dwc->ep0state != EP0_SETUP_PHASE) {
+		reinit_completion(&dwc->ep0_in_setup);
+
+		ret = wait_for_completion_timeout(&dwc->ep0_in_setup,
+				msecs_to_jiffies(DWC3_PULL_UP_TIMEOUT));
+		if (ret == 0) {
+			dev_warn(dwc->dev, "wait for SETUP phase timed out\n");
+			spin_lock_irqsave(&dwc->lock, flags);
+			dwc3_ep0_reset_state(dwc);
+			spin_unlock_irqrestore(&dwc->lock, flags);
+		}
+	}
+
+	/*
 	 * Note: if the GEVNTCOUNT indicates events in the event buffer, the
 	 * driver needs to acknowledge them before the controller can halt.
 	 * Simply let the interrupt handler acknowledges and handle the
 	 * remaining event generated by the controller while polling for
 	 * DSTS.DEVCTLHLT.
 	 */
-	return dwc3_gadget_run_stop(dwc, false, false);
+	ret = dwc3_gadget_run_stop(dwc, false);
+
+	/*
+	 * Stop the gadget after controller is halted, so that if needed, the
+	 * events to update EP0 state can still occur while the run/stop
+	 * routine polls for the halted state.  DEVTEN is cleared as part of
+	 * gadget stop.
+	 */
+	spin_lock_irqsave(&dwc->lock, flags);
+	__dwc3_gadget_stop(dwc);
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	return ret;
 }
 
 static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on)
@@ -2628,7 +2750,7 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on)
 
 		dwc3_event_buffers_setup(dwc);
 		__dwc3_gadget_start(dwc);
-		ret = dwc3_gadget_run_stop(dwc, true, false);
+		ret = dwc3_gadget_run_stop(dwc, true);
 	}
 
 	pm_runtime_put(dwc->dev);
@@ -2982,6 +3104,8 @@ static void dwc3_gadget_async_callbacks(struct usb_gadget *g, bool enable)
 static const struct usb_gadget_ops dwc3_gadget_ops = {
 	.get_frame		= dwc3_gadget_get_frame,
 	.wakeup			= dwc3_gadget_wakeup,
+	.func_wakeup		= dwc3_gadget_func_wakeup,
+	.set_remote_wakeup	= dwc3_gadget_set_remote_wakeup,
 	.set_selfpowered	= dwc3_gadget_set_selfpowered,
 	.pullup			= dwc3_gadget_pullup,
 	.udc_start		= dwc3_gadget_start,
@@ -3827,18 +3951,11 @@ static void dwc3_gadget_disconnect_interrupt(struct dwc3 *dwc)
 
 	dwc->gadget->speed = USB_SPEED_UNKNOWN;
 	dwc->setup_packet_pending = false;
+	dwc->gadget->wakeup_armed = false;
+	dwc3_gadget_enable_linksts_evts(dwc, false);
 	usb_gadget_set_state(dwc->gadget, USB_STATE_NOTATTACHED);
 
-	if (dwc->ep0state != EP0_SETUP_PHASE) {
-		unsigned int    dir;
-
-		dir = !!dwc->ep0_expect_in;
-		if (dwc->ep0state == EP0_DATA_PHASE)
-			dwc3_ep0_end_control_data(dwc, dwc->eps[dir]);
-		else
-			dwc3_ep0_end_control_data(dwc, dwc->eps[!dir]);
-		dwc3_ep0_stall_and_restart(dwc);
-	}
+	dwc3_ep0_reset_state(dwc);
 }
 
 static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc)
@@ -3892,20 +4009,7 @@ static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc)
 	 * phase. So ensure that EP0 is in setup phase by issuing a stall
 	 * and restart if EP0 is not in setup phase.
 	 */
-	if (dwc->ep0state != EP0_SETUP_PHASE) {
-		unsigned int	dir;
-
-		dir = !!dwc->ep0_expect_in;
-		if (dwc->ep0state == EP0_DATA_PHASE)
-			dwc3_ep0_end_control_data(dwc, dwc->eps[dir]);
-		else
-			dwc3_ep0_end_control_data(dwc, dwc->eps[!dir]);
-
-		dwc->eps[0]->trb_enqueue = 0;
-		dwc->eps[1]->trb_enqueue = 0;
-
-		dwc3_ep0_stall_and_restart(dwc);
-	}
+	dwc3_ep0_reset_state(dwc);
 
 	/*
 	 * In the Synopsis DesignWare Cores USB3 Databook Rev. 3.30a
@@ -3920,6 +4024,8 @@ static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc)
 	reg &= ~DWC3_DCTL_TSTCTRL_MASK;
 	dwc3_gadget_dctl_write_safe(dwc, reg);
 	dwc->test_mode = false;
+	dwc->gadget->wakeup_armed = false;
+	dwc3_gadget_enable_linksts_evts(dwc, false);
 	dwc3_clear_stall_all_ep(dwc);
 
 	/* Reset device address to zero */
@@ -4072,7 +4178,7 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
 	 */
 }
 
-static void dwc3_gadget_wakeup_interrupt(struct dwc3 *dwc)
+static void dwc3_gadget_wakeup_interrupt(struct dwc3 *dwc, unsigned int evtinfo)
 {
 	/*
 	 * TODO take core out of low power mode when that's
@@ -4084,6 +4190,8 @@ static void dwc3_gadget_wakeup_interrupt(struct dwc3 *dwc)
 		dwc->gadget_driver->resume(dwc->gadget);
 		spin_lock(&dwc->lock);
 	}
+
+	dwc->link_state = evtinfo & DWC3_LINK_STATE_MASK;
 }
 
 static void dwc3_gadget_linksts_change_interrupt(struct dwc3 *dwc,
@@ -4165,6 +4273,12 @@ static void dwc3_gadget_linksts_change_interrupt(struct dwc3 *dwc,
 	}
 
 	switch (next) {
+	case DWC3_LINK_STATE_U0:
+		if (dwc->gadget->wakeup_armed) {
+			dwc3_gadget_enable_linksts_evts(dwc, false);
+			dwc3_resume_gadget(dwc);
+		}
+		break;
 	case DWC3_LINK_STATE_U1:
 		if (dwc->speed == USB_SPEED_SUPER)
 			dwc3_suspend_gadget(dwc);
@@ -4195,30 +4309,6 @@ static void dwc3_gadget_suspend_interrupt(struct dwc3 *dwc,
 	dwc->link_state = next;
 }
 
-static void dwc3_gadget_hibernation_interrupt(struct dwc3 *dwc,
-		unsigned int evtinfo)
-{
-	unsigned int is_ss = evtinfo & BIT(4);
-
-	/*
-	 * WORKAROUND: DWC3 revision 2.20a with hibernation support
-	 * have a known issue which can cause USB CV TD.9.23 to fail
-	 * randomly.
-	 *
-	 * Because of this issue, core could generate bogus hibernation
-	 * events which SW needs to ignore.
-	 *
-	 * Refers to:
-	 *
-	 * STAR#9000546576: Device Mode Hibernation: Issue in USB 2.0
-	 * Device Fallback from SuperSpeed
-	 */
-	if (is_ss ^ (dwc->speed == USB_SPEED_SUPER))
-		return;
-
-	/* enter hibernation here */
-}
-
 static void dwc3_gadget_interrupt(struct dwc3 *dwc,
 		const struct dwc3_event_devt *event)
 {
@@ -4233,29 +4323,18 @@ static void dwc3_gadget_interrupt(struct dwc3 *dwc,
 		dwc3_gadget_conndone_interrupt(dwc);
 		break;
 	case DWC3_DEVICE_EVENT_WAKEUP:
-		dwc3_gadget_wakeup_interrupt(dwc);
+		dwc3_gadget_wakeup_interrupt(dwc, event->event_info);
 		break;
 	case DWC3_DEVICE_EVENT_HIBER_REQ:
-		if (dev_WARN_ONCE(dwc->dev, !dwc->has_hibernation,
-					"unexpected hibernation event\n"))
-			break;
-
-		dwc3_gadget_hibernation_interrupt(dwc, event->event_info);
+		dev_WARN_ONCE(dwc->dev, true, "unexpected hibernation event\n");
 		break;
 	case DWC3_DEVICE_EVENT_LINK_STATUS_CHANGE:
 		dwc3_gadget_linksts_change_interrupt(dwc, event->event_info);
 		break;
 	case DWC3_DEVICE_EVENT_SUSPEND:
 		/* It changed to be suspend event for version 2.30a and above */
-		if (!DWC3_VER_IS_PRIOR(DWC3, 230A)) {
-			/*
-			 * Ignore suspend event until the gadget enters into
-			 * USB_STATE_CONFIGURED state.
-			 */
-			if (dwc->gadget->state >= USB_STATE_CONFIGURED)
-				dwc3_gadget_suspend_interrupt(dwc,
-						event->event_info);
-		}
+		if (!DWC3_VER_IS_PRIOR(DWC3, 230A))
+			dwc3_gadget_suspend_interrupt(dwc, event->event_info);
 		break;
 	case DWC3_DEVICE_EVENT_SOF:
 	case DWC3_DEVICE_EVENT_ERRATIC_ERROR:
@@ -4417,11 +4496,6 @@ static int dwc3_gadget_get_irq(struct dwc3 *dwc)
 		goto out;
 
 	irq = platform_get_irq(dwc3_pdev, 0);
-	if (irq > 0)
-		goto out;
-
-	if (!irq)
-		irq = -EINVAL;
 
 out:
 	return irq;
@@ -4493,6 +4567,7 @@ int dwc3_gadget_init(struct dwc3 *dwc)
 	dwc->gadget->sg_supported	= true;
 	dwc->gadget->name		= "dwc3-gadget";
 	dwc->gadget->lpm_capable	= !dwc->usb2_gadget_lpm_disable;
+	dwc->gadget->wakeup_capable	= true;
 
 	/*
 	 * FIXME We might be setting max_speed to <SUPER, however versions
@@ -4584,7 +4659,7 @@ int dwc3_gadget_suspend(struct dwc3 *dwc)
 	if (!dwc->gadget_driver)
 		return 0;
 
-	dwc3_gadget_run_stop(dwc, false, false);
+	dwc3_gadget_run_stop(dwc, false);
 
 	spin_lock_irqsave(&dwc->lock, flags);
 	dwc3_disconnect_gadget(dwc);
@@ -4605,7 +4680,7 @@ int dwc3_gadget_resume(struct dwc3 *dwc)
 	if (ret < 0)
 		goto err0;
 
-	ret = dwc3_gadget_run_stop(dwc, true, false);
+	ret = dwc3_gadget_run_stop(dwc, true);
 	if (ret < 0)
 		goto err1;