diff options
Diffstat (limited to 'drivers/usb/gadget/ci13xxx_udc.h')
-rw-r--r-- | drivers/usb/gadget/ci13xxx_udc.h | 195 |
1 files changed, 195 insertions, 0 deletions
diff --git a/drivers/usb/gadget/ci13xxx_udc.h b/drivers/usb/gadget/ci13xxx_udc.h new file mode 100644 index 000000000000..4026e9cede34 --- /dev/null +++ b/drivers/usb/gadget/ci13xxx_udc.h @@ -0,0 +1,195 @@ +/* + * ci13xxx_udc.h - structures, registers, and macros MIPS USB IP core + * + * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved. + * + * Author: David Lopo + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Description: MIPS USB IP core family device controller + * Structures, registers and logging macros + */ + +#ifndef _CI13XXX_h_ +#define _CI13XXX_h_ + +/****************************************************************************** + * DEFINE + *****************************************************************************/ +#define ENDPT_MAX (16) +#define CTRL_PAYLOAD_MAX (64) +#define RX (0) /* similar to USB_DIR_OUT but can be used as an index */ +#define TX (1) /* similar to USB_DIR_IN but can be used as an index */ + +/****************************************************************************** + * STRUCTURES + *****************************************************************************/ +/* DMA layout of transfer descriptors */ +struct ci13xxx_td { + /* 0 */ + u32 next; +#define TD_TERMINATE BIT(0) + /* 1 */ + u32 token; +#define TD_STATUS (0x00FFUL << 0) +#define TD_STATUS_TR_ERR BIT(3) +#define TD_STATUS_DT_ERR BIT(5) +#define TD_STATUS_HALTED BIT(6) +#define TD_STATUS_ACTIVE BIT(7) +#define TD_MULTO (0x0003UL << 10) +#define TD_IOC BIT(15) +#define TD_TOTAL_BYTES (0x7FFFUL << 16) + /* 2 */ + u32 page[5]; +#define TD_CURR_OFFSET (0x0FFFUL << 0) +#define TD_FRAME_NUM (0x07FFUL << 0) +#define TD_RESERVED_MASK (0x0FFFUL << 0) +} __attribute__ ((packed)); + +/* DMA layout of queue heads */ +struct ci13xxx_qh { + /* 0 */ + u32 cap; +#define QH_IOS BIT(15) +#define QH_MAX_PKT (0x07FFUL << 16) +#define QH_ZLT BIT(29) +#define QH_MULT (0x0003UL << 30) + /* 1 */ + u32 curr; + /* 2 - 8 */ + struct ci13xxx_td td; + /* 9 */ + u32 RESERVED; + struct usb_ctrlrequest setup; +} __attribute__ ((packed)); + +/* Extension of usb_request */ +struct ci13xxx_req { + struct usb_request req; + unsigned map; + struct list_head queue; + struct ci13xxx_td *ptr; + dma_addr_t dma; +}; + +/* Extension of usb_ep */ +struct ci13xxx_ep { + struct usb_ep ep; + const struct usb_endpoint_descriptor *desc; + u8 dir; + u8 num; + u8 type; + char name[16]; + struct { + struct list_head queue; + struct ci13xxx_qh *ptr; + dma_addr_t dma; + } qh[2]; + struct usb_request *status; + int wedge; + + /* global resources */ + spinlock_t *lock; + struct device *device; + struct dma_pool *td_pool; +}; + +/* CI13XXX UDC descriptor & global resources */ +struct ci13xxx { + spinlock_t *lock; /* ctrl register bank access */ + + struct dma_pool *qh_pool; /* DMA pool for queue heads */ + struct dma_pool *td_pool; /* DMA pool for transfer descs */ + + struct usb_gadget gadget; /* USB slave device */ + struct ci13xxx_ep ci13xxx_ep[ENDPT_MAX]; /* extended endpts */ + + struct usb_gadget_driver *driver; /* 3rd party gadget driver */ +}; + +/****************************************************************************** + * REGISTERS + *****************************************************************************/ +/* register size */ +#define REG_BITS (32) + +/* HCCPARAMS */ +#define HCCPARAMS_LEN BIT(17) + +/* DCCPARAMS */ +#define DCCPARAMS_DEN (0x1F << 0) +#define DCCPARAMS_DC BIT(7) + +/* TESTMODE */ +#define TESTMODE_FORCE BIT(0) + +/* USBCMD */ +#define USBCMD_RS BIT(0) +#define USBCMD_RST BIT(1) +#define USBCMD_SUTW BIT(13) + +/* USBSTS & USBINTR */ +#define USBi_UI BIT(0) +#define USBi_UEI BIT(1) +#define USBi_PCI BIT(2) +#define USBi_URI BIT(6) +#define USBi_SLI BIT(8) + +/* DEVICEADDR */ +#define DEVICEADDR_USBADRA BIT(24) +#define DEVICEADDR_USBADR (0x7FUL << 25) + +/* PORTSC */ +#define PORTSC_SUSP BIT(7) +#define PORTSC_HSP BIT(9) +#define PORTSC_PTC (0x0FUL << 16) + +/* DEVLC */ +#define DEVLC_PSPD (0x03UL << 25) +#define DEVLC_PSPD_HS (0x02UL << 25) + +/* USBMODE */ +#define USBMODE_CM (0x03UL << 0) +#define USBMODE_CM_IDLE (0x00UL << 0) +#define USBMODE_CM_DEVICE (0x02UL << 0) +#define USBMODE_CM_HOST (0x03UL << 0) +#define USBMODE_SLOM BIT(3) + +/* ENDPTCTRL */ +#define ENDPTCTRL_RXS BIT(0) +#define ENDPTCTRL_RXT (0x03UL << 2) +#define ENDPTCTRL_RXR BIT(6) /* reserved for port 0 */ +#define ENDPTCTRL_RXE BIT(7) +#define ENDPTCTRL_TXS BIT(16) +#define ENDPTCTRL_TXT (0x03UL << 18) +#define ENDPTCTRL_TXR BIT(22) /* reserved for port 0 */ +#define ENDPTCTRL_TXE BIT(23) + +/****************************************************************************** + * LOGGING + *****************************************************************************/ +#define ci13xxx_printk(level, format, args...) \ +do { \ + if (_udc == NULL) \ + printk(level "[%s] " format "\n", __func__, ## args); \ + else \ + dev_printk(level, _udc->gadget.dev.parent, \ + "[%s] " format "\n", __func__, ## args); \ +} while (0) + +#define err(format, args...) ci13xxx_printk(KERN_ERR, format, ## args) +#define warn(format, args...) ci13xxx_printk(KERN_WARNING, format, ## args) +#define info(format, args...) ci13xxx_printk(KERN_INFO, format, ## args) + +#ifdef TRACE +#define trace(format, args...) ci13xxx_printk(KERN_DEBUG, format, ## args) +#define dbg_trace(format, args...) dev_dbg(dev, format, ##args) +#else +#define trace(format, args...) do {} while (0) +#define dbg_trace(format, args...) do {} while (0) +#endif + +#endif /* _CI13XXX_h_ */ |