diff options
Diffstat (limited to 'drivers/usb/musb/musb_host.c')
-rw-r--r-- | drivers/usb/musb/musb_host.c | 106 |
1 files changed, 47 insertions, 59 deletions
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 07b106c7de82..75aa01e0036d 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -106,6 +106,7 @@ static void musb_ep_program(struct musb *musb, u8 epnum, */ static void musb_h_tx_flush_fifo(struct musb_hw_ep *ep) { + struct musb *musb = ep->musb; void __iomem *epio = ep->regs; u16 csr; u16 lastcsr = 0; @@ -114,7 +115,7 @@ static void musb_h_tx_flush_fifo(struct musb_hw_ep *ep) csr = musb_readw(epio, MUSB_TXCSR); while (csr & MUSB_TXCSR_FIFONOTEMPTY) { if (csr != lastcsr) - DBG(3, "Host TX FIFONOTEMPTY csr: %02x\n", csr); + dev_dbg(musb->controller, "Host TX FIFONOTEMPTY csr: %02x\n", csr); lastcsr = csr; csr |= MUSB_TXCSR_FLUSHFIFO; musb_writew(epio, MUSB_TXCSR, csr); @@ -240,7 +241,7 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh) len = urb->transfer_buffer_length - urb->actual_length; } - DBG(4, "qh %p urb %p dev%d ep%d%s%s, hw_ep %d, %p/%d\n", + dev_dbg(musb->controller, "qh %p urb %p dev%d ep%d%s%s, hw_ep %d, %p/%d\n", qh, urb, address, qh->epnum, is_in ? "in" : "out", ({char *s; switch (qh->type) { @@ -263,7 +264,7 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh) switch (qh->type) { case USB_ENDPOINT_XFER_ISOC: case USB_ENDPOINT_XFER_INT: - DBG(3, "check whether there's still time for periodic Tx\n"); + dev_dbg(musb->controller, "check whether there's still time for periodic Tx\n"); frame = musb_readw(mbase, MUSB_FRAME); /* FIXME this doesn't implement that scheduling policy ... * or handle framecounter wrapping @@ -278,7 +279,7 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh) } else { qh->frame = urb->start_frame; /* enable SOF interrupt so we can count down */ - DBG(1, "SOF for %d\n", epnum); + dev_dbg(musb->controller, "SOF for %d\n", epnum); #if 1 /* ifndef CONFIG_ARCH_DAVINCI */ musb_writeb(mbase, MUSB_INTRUSBE, 0xff); #endif @@ -286,7 +287,7 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh) break; default: start: - DBG(4, "Start TX%d %s\n", epnum, + dev_dbg(musb->controller, "Start TX%d %s\n", epnum, hw_ep->tx_channel ? "dma" : "pio"); if (!hw_ep->tx_channel) @@ -301,21 +302,7 @@ static void musb_giveback(struct musb *musb, struct urb *urb, int status) __releases(musb->lock) __acquires(musb->lock) { - DBG(({ int level; switch (status) { - case 0: - level = 4; - break; - /* common/boring faults */ - case -EREMOTEIO: - case -ESHUTDOWN: - case -ECONNRESET: - case -EPIPE: - level = 3; - break; - default: - level = 2; - break; - }; level; }), + dev_dbg(musb->controller, "complete %p %pF (%d), dev%d ep%d%s, %d/%d\n", urb, urb->complete, status, usb_pipedevice(urb->pipe), @@ -426,7 +413,7 @@ static void musb_advance_schedule(struct musb *musb, struct urb *urb, } if (qh != NULL && qh->is_ready) { - DBG(4, "... next ep%d %cX urb %p\n", + dev_dbg(musb->controller, "... next ep%d %cX urb %p\n", hw_ep->epnum, is_in ? 'R' : 'T', next_urb(qh)); musb_start_urb(musb, is_in, qh); } @@ -471,7 +458,7 @@ musb_host_packet_rx(struct musb *musb, struct urb *urb, u8 epnum, u8 iso_err) /* musb_ep_select(mbase, epnum); */ rx_count = musb_readw(epio, MUSB_RXCOUNT); - DBG(3, "RX%d count %d, buffer %p len %d/%d\n", epnum, rx_count, + dev_dbg(musb->controller, "RX%d count %d, buffer %p len %d/%d\n", epnum, rx_count, urb->transfer_buffer, qh->offset, urb->transfer_buffer_length); @@ -493,7 +480,7 @@ musb_host_packet_rx(struct musb *musb, struct urb *urb, u8 epnum, u8 iso_err) status = -EOVERFLOW; urb->error_count++; } - DBG(2, "** OVERFLOW %d into %d\n", rx_count, length); + dev_dbg(musb->controller, "** OVERFLOW %d into %d\n", rx_count, length); do_flush = 1; } else length = rx_count; @@ -511,7 +498,7 @@ musb_host_packet_rx(struct musb *musb, struct urb *urb, u8 epnum, u8 iso_err) if (rx_count > length) { if (urb->status == -EINPROGRESS) urb->status = -EOVERFLOW; - DBG(2, "** OVERFLOW %d into %d\n", rx_count, length); + dev_dbg(musb->controller, "** OVERFLOW %d into %d\n", rx_count, length); do_flush = 1; } else length = rx_count; @@ -697,7 +684,7 @@ static void musb_ep_program(struct musb *musb, u8 epnum, struct musb_qh *qh = musb_ep_get_qh(hw_ep, !is_out); u16 packet_sz = qh->maxpacket; - DBG(3, "%s hw%d urb %p spd%d dev%d ep%d%s " + dev_dbg(musb->controller, "%s hw%d urb %p spd%d dev%d ep%d%s " "h_addr%02x h_port%02x bytes %d\n", is_out ? "-->" : "<--", epnum, urb, urb->dev->speed, @@ -880,7 +867,7 @@ static void musb_ep_program(struct musb *musb, u8 epnum, } csr |= MUSB_RXCSR_H_REQPKT; - DBG(7, "RXCSR%d := %04x\n", epnum, csr); + dev_dbg(musb->controller, "RXCSR%d := %04x\n", epnum, csr); musb_writew(hw_ep->regs, MUSB_RXCSR, csr); csr = musb_readw(hw_ep->regs, MUSB_RXCSR); } @@ -923,15 +910,15 @@ static bool musb_h_ep0_continue(struct musb *musb, u16 len, struct urb *urb) request = (struct usb_ctrlrequest *) urb->setup_packet; if (!request->wLength) { - DBG(4, "start no-DATA\n"); + dev_dbg(musb->controller, "start no-DATA\n"); break; } else if (request->bRequestType & USB_DIR_IN) { - DBG(4, "start IN-DATA\n"); + dev_dbg(musb->controller, "start IN-DATA\n"); musb->ep0_stage = MUSB_EP0_IN; more = true; break; } else { - DBG(4, "start OUT-DATA\n"); + dev_dbg(musb->controller, "start OUT-DATA\n"); musb->ep0_stage = MUSB_EP0_OUT; more = true; } @@ -943,7 +930,7 @@ static bool musb_h_ep0_continue(struct musb *musb, u16 len, struct urb *urb) if (fifo_count) { fifo_dest = (u8 *) (urb->transfer_buffer + urb->actual_length); - DBG(3, "Sending %d byte%s to ep0 fifo %p\n", + dev_dbg(musb->controller, "Sending %d byte%s to ep0 fifo %p\n", fifo_count, (fifo_count == 1) ? "" : "s", fifo_dest); @@ -988,7 +975,7 @@ irqreturn_t musb_h_ep0_irq(struct musb *musb) ? musb_readb(epio, MUSB_COUNT0) : 0; - DBG(4, "<== csr0 %04x, qh %p, count %d, urb %p, stage %d\n", + dev_dbg(musb->controller, "<== csr0 %04x, qh %p, count %d, urb %p, stage %d\n", csr, qh, len, urb, musb->ep0_stage); /* if we just did status stage, we are done */ @@ -999,15 +986,15 @@ irqreturn_t musb_h_ep0_irq(struct musb *musb) /* prepare status */ if (csr & MUSB_CSR0_H_RXSTALL) { - DBG(6, "STALLING ENDPOINT\n"); + dev_dbg(musb->controller, "STALLING ENDPOINT\n"); status = -EPIPE; } else if (csr & MUSB_CSR0_H_ERROR) { - DBG(2, "no response, csr0 %04x\n", csr); + dev_dbg(musb->controller, "no response, csr0 %04x\n", csr); status = -EPROTO; } else if (csr & MUSB_CSR0_H_NAKTIMEOUT) { - DBG(2, "control NAK timeout\n"); + dev_dbg(musb->controller, "control NAK timeout\n"); /* NOTE: this code path would be a good place to PAUSE a * control transfer, if another one is queued, so that @@ -1022,7 +1009,7 @@ irqreturn_t musb_h_ep0_irq(struct musb *musb) } if (status) { - DBG(6, "aborting\n"); + dev_dbg(musb->controller, "aborting\n"); retval = IRQ_HANDLED; if (urb) urb->status = status; @@ -1072,7 +1059,7 @@ irqreturn_t musb_h_ep0_irq(struct musb *musb) /* flag status stage */ musb->ep0_stage = MUSB_EP0_STATUS; - DBG(5, "ep0 STATUS, csr %04x\n", csr); + dev_dbg(musb->controller, "ep0 STATUS, csr %04x\n", csr); } musb_writew(epio, MUSB_CSR0, csr); @@ -1126,31 +1113,31 @@ void musb_host_tx(struct musb *musb, u8 epnum) /* with CPPI, DMA sometimes triggers "extra" irqs */ if (!urb) { - DBG(4, "extra TX%d ready, csr %04x\n", epnum, tx_csr); + dev_dbg(musb->controller, "extra TX%d ready, csr %04x\n", epnum, tx_csr); return; } pipe = urb->pipe; dma = is_dma_capable() ? hw_ep->tx_channel : NULL; - DBG(4, "OUT/TX%d end, csr %04x%s\n", epnum, tx_csr, + dev_dbg(musb->controller, "OUT/TX%d end, csr %04x%s\n", epnum, tx_csr, dma ? ", dma" : ""); /* check for errors */ if (tx_csr & MUSB_TXCSR_H_RXSTALL) { /* dma was disabled, fifo flushed */ - DBG(3, "TX end %d stall\n", epnum); + dev_dbg(musb->controller, "TX end %d stall\n", epnum); /* stall; record URB status */ status = -EPIPE; } else if (tx_csr & MUSB_TXCSR_H_ERROR) { /* (NON-ISO) dma was disabled, fifo flushed */ - DBG(3, "TX 3strikes on ep=%d\n", epnum); + dev_dbg(musb->controller, "TX 3strikes on ep=%d\n", epnum); status = -ETIMEDOUT; } else if (tx_csr & MUSB_TXCSR_H_NAKTIMEOUT) { - DBG(6, "TX end=%d device not responding\n", epnum); + dev_dbg(musb->controller, "TX end=%d device not responding\n", epnum); /* NOTE: this code path would be a good place to PAUSE a * transfer, if there's some other (nonperiodic) tx urb @@ -1195,7 +1182,7 @@ void musb_host_tx(struct musb *musb, u8 epnum) /* second cppi case */ if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) { - DBG(4, "extra TX%d ready, csr %04x\n", epnum, tx_csr); + dev_dbg(musb->controller, "extra TX%d ready, csr %04x\n", epnum, tx_csr); return; } @@ -1254,7 +1241,7 @@ void musb_host_tx(struct musb *musb, u8 epnum) * FIFO mode too... */ if (tx_csr & (MUSB_TXCSR_FIFONOTEMPTY | MUSB_TXCSR_TXPKTRDY)) { - DBG(2, "DMA complete but packet still in FIFO, " + dev_dbg(musb->controller, "DMA complete but packet still in FIFO, " "CSR %04x\n", tx_csr); return; } @@ -1321,7 +1308,7 @@ void musb_host_tx(struct musb *musb, u8 epnum) return; } } else if (tx_csr & MUSB_TXCSR_DMAENAB) { - DBG(1, "not complete, but DMA enabled?\n"); + dev_dbg(musb->controller, "not complete, but DMA enabled?\n"); return; } @@ -1462,7 +1449,7 @@ void musb_host_rx(struct musb *musb, u8 epnum) * usbtest #11 (unlinks) triggers it regularly, sometimes * with fifo full. (Only with DMA??) */ - DBG(3, "BOGUS RX%d ready, csr %04x, count %d\n", epnum, val, + dev_dbg(musb->controller, "BOGUS RX%d ready, csr %04x, count %d\n", epnum, val, musb_readw(epio, MUSB_RXCOUNT)); musb_h_flush_rxfifo(hw_ep, MUSB_RXCSR_CLRDATATOG); return; @@ -1470,20 +1457,20 @@ void musb_host_rx(struct musb *musb, u8 epnum) pipe = urb->pipe; - DBG(5, "<== hw %d rxcsr %04x, urb actual %d (+dma %zu)\n", + dev_dbg(musb->controller, "<== hw %d rxcsr %04x, urb actual %d (+dma %zu)\n", epnum, rx_csr, urb->actual_length, dma ? dma->actual_len : 0); /* check for errors, concurrent stall & unlink is not really * handled yet! */ if (rx_csr & MUSB_RXCSR_H_RXSTALL) { - DBG(3, "RX end %d STALL\n", epnum); + dev_dbg(musb->controller, "RX end %d STALL\n", epnum); /* stall; record URB status */ status = -EPIPE; } else if (rx_csr & MUSB_RXCSR_H_ERROR) { - DBG(3, "end %d RX proto error\n", epnum); + dev_dbg(musb->controller, "end %d RX proto error\n", epnum); status = -EPROTO; musb_writeb(epio, MUSB_RXINTERVAL, 0); @@ -1491,7 +1478,7 @@ void musb_host_rx(struct musb *musb, u8 epnum) } else if (rx_csr & MUSB_RXCSR_DATAERROR) { if (USB_ENDPOINT_XFER_ISOC != qh->type) { - DBG(6, "RX end %d NAK timeout\n", epnum); + dev_dbg(musb->controller, "RX end %d NAK timeout\n", epnum); /* NOTE: NAKing is *NOT* an error, so we want to * continue. Except ... if there's a request for @@ -1514,12 +1501,12 @@ void musb_host_rx(struct musb *musb, u8 epnum) goto finish; } else { - DBG(4, "RX end %d ISO data error\n", epnum); + dev_dbg(musb->controller, "RX end %d ISO data error\n", epnum); /* packet error reported later */ iso_err = true; } } else if (rx_csr & MUSB_RXCSR_INCOMPRX) { - DBG(3, "end %d high bandwidth incomplete ISO packet RX\n", + dev_dbg(musb->controller, "end %d high bandwidth incomplete ISO packet RX\n", epnum); status = -EPROTO; } @@ -1565,7 +1552,7 @@ void musb_host_rx(struct musb *musb, u8 epnum) done = true; } - DBG(2, "RXCSR%d %04x, reqpkt, len %zu%s\n", epnum, rx_csr, + dev_dbg(musb->controller, "RXCSR%d %04x, reqpkt, len %zu%s\n", epnum, rx_csr, xfer_len, dma ? ", dma" : ""); rx_csr &= ~MUSB_RXCSR_H_REQPKT; @@ -1615,7 +1602,7 @@ void musb_host_rx(struct musb *musb, u8 epnum) MUSB_RXCSR_H_WZC_BITS | val); } - DBG(4, "ep %d dma %s, rxcsr %04x, rxcount %d\n", epnum, + dev_dbg(musb->controller, "ep %d dma %s, rxcsr %04x, rxcount %d\n", epnum, done ? "off" : "reset", musb_readw(epio, MUSB_RXCSR), musb_readw(epio, MUSB_RXCOUNT)); @@ -1648,7 +1635,7 @@ void musb_host_rx(struct musb *musb, u8 epnum) rx_count = musb_readw(epio, MUSB_RXCOUNT); - DBG(2, "RX%d count %d, buffer 0x%x len %d/%d\n", + dev_dbg(musb->controller, "RX%d count %d, buffer 0x%x len %d/%d\n", epnum, rx_count, urb->transfer_dma + urb->actual_length, @@ -1672,7 +1659,7 @@ void musb_host_rx(struct musb *musb, u8 epnum) d_status = -EOVERFLOW; urb->error_count++; } - DBG(2, "** OVERFLOW %d into %d\n",\ + dev_dbg(musb->controller, "** OVERFLOW %d into %d\n",\ rx_count, d->length); length = d->length; @@ -1760,7 +1747,7 @@ void musb_host_rx(struct musb *musb, u8 epnum) usb_hcd_unmap_urb_for_dma(musb_to_hcd(musb), urb); done = musb_host_packet_rx(musb, urb, epnum, iso_err); - DBG(6, "read %spacket\n", done ? "last " : ""); + dev_dbg(musb->controller, "read %spacket\n", done ? "last " : ""); } } @@ -1881,7 +1868,7 @@ static int musb_schedule( idle = 1; qh->mux = 0; hw_ep = musb->endpoints + best_end; - DBG(4, "qh %p periodic slot %d\n", qh, best_end); + dev_dbg(musb->controller, "qh %p periodic slot %d\n", qh, best_end); success: if (head) { idle = list_empty(head); @@ -2087,6 +2074,7 @@ done: static int musb_cleanup_urb(struct urb *urb, struct musb_qh *qh) { struct musb_hw_ep *ep = qh->hw_ep; + struct musb *musb = ep->musb; void __iomem *epio = ep->regs; unsigned hw_end = ep->epnum; void __iomem *regs = ep->musb->mregs; @@ -2102,7 +2090,7 @@ static int musb_cleanup_urb(struct urb *urb, struct musb_qh *qh) dma = is_in ? ep->rx_channel : ep->tx_channel; if (dma) { status = ep->musb->dma_controller->channel_abort(dma); - DBG(status ? 1 : 3, + dev_dbg(musb->controller, "abort %cX%d DMA for urb %p --> %d\n", is_in ? 'R' : 'T', ep->epnum, urb, status); @@ -2149,7 +2137,7 @@ static int musb_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) int is_in = usb_pipein(urb->pipe); int ret; - DBG(4, "urb=%p, dev%d ep%d%s\n", urb, + dev_dbg(musb->controller, "urb=%p, dev%d ep%d%s\n", urb, usb_pipedevice(urb->pipe), usb_pipeendpoint(urb->pipe), is_in ? "in" : "out"); |