summaryrefslogtreecommitdiffstats
path: root/drivers/usb/otg/langwell_otg.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/otg/langwell_otg.c')
-rw-r--r--drivers/usb/otg/langwell_otg.c48
1 files changed, 11 insertions, 37 deletions
diff --git a/drivers/usb/otg/langwell_otg.c b/drivers/usb/otg/langwell_otg.c
index 9fea48264fa2..7f9b8cd4514b 100644
--- a/drivers/usb/otg/langwell_otg.c
+++ b/drivers/usb/otg/langwell_otg.c
@@ -174,50 +174,24 @@ static int langwell_otg_set_power(struct otg_transceiver *otg,
return 0;
}
-/* A-device drives vbus, controlled through PMIC CHRGCNTL register*/
+/* A-device drives vbus, controlled through IPC commands */
static int langwell_otg_set_vbus(struct otg_transceiver *otg, bool enabled)
{
struct langwell_otg *lnw = the_transceiver;
- u8 r;
+ u8 sub_id;
dev_dbg(lnw->dev, "%s <--- %s\n", __func__, enabled ? "on" : "off");
- /* FIXME: surely we should cache this on the first read. If not use
- readv to avoid two transactions */
- if (intel_scu_ipc_ioread8(0x00, &r) < 0) {
- dev_dbg(lnw->dev, "Failed to read PMIC register 0xD2");
- return -EBUSY;
- }
- if ((r & 0x03) != 0x02) {
- dev_dbg(lnw->dev, "not NEC PMIC attached\n");
- return -EBUSY;
- }
-
- if (intel_scu_ipc_ioread8(0x20, &r) < 0) {
- dev_dbg(lnw->dev, "Failed to read PMIC register 0xD2");
- return -EBUSY;
- }
-
- if ((r & 0x20) == 0) {
- dev_dbg(lnw->dev, "no battery attached\n");
- return -EBUSY;
- }
+ if (enabled)
+ sub_id = 0x8; /* Turn on the VBus */
+ else
+ sub_id = 0x9; /* Turn off the VBus */
- /* Workaround for battery attachment issue */
- if (r == 0x34) {
- dev_dbg(lnw->dev, "no battery attached on SH\n");
+ if (intel_scu_ipc_simple_command(0xef, sub_id)) {
+ dev_dbg(lnw->dev, "Failed to set Vbus via IPC commands\n");
return -EBUSY;
}
- dev_dbg(lnw->dev, "battery attached. 2 reg = %x\n", r);
-
- /* workaround: FW detect writing 0x20/0xc0 to d4 event.
- * this is only for NEC PMIC.
- */
-
- if (intel_scu_ipc_iowrite8(0xD4, enabled ? 0x20 : 0xC0))
- dev_dbg(lnw->dev, "Failed to write PMIC.\n");
-
dev_dbg(lnw->dev, "%s --->\n", __func__);
return 0;
@@ -394,14 +368,14 @@ static void langwell_otg_phy_low_power(int on)
dev_dbg(lnw->dev, "%s <--- done\n", __func__);
}
-/* After drv vbus, add 2 ms delay to set PHCD */
+/* After drv vbus, add 5 ms delay to set PHCD */
static void langwell_otg_phy_low_power_wait(int on)
{
struct langwell_otg *lnw = the_transceiver;
- dev_dbg(lnw->dev, "add 2ms delay before programing PHCD\n");
+ dev_dbg(lnw->dev, "add 5ms delay before programing PHCD\n");
- mdelay(2);
+ mdelay(5);
langwell_otg_phy_low_power(on);
}