summaryrefslogtreecommitdiffstats
path: root/drivers/usb/serial/cp210x.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/serial/cp210x.c')
-rw-r--r--drivers/usb/serial/cp210x.c306
1 files changed, 183 insertions, 123 deletions
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 73a366de5102..fbfe761c7fba 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -327,113 +327,169 @@ struct cp210x_comm_status {
#define PURGE_ALL 0x000f
/*
- * cp210x_get_config
- * Reads from the CP210x configuration registers
- * 'size' is specified in bytes.
- * 'data' is a pointer to a pre-allocated array of integers large
- * enough to hold 'size' bytes (with 4 bytes to each integer)
+ * Reads a variable-sized block of CP210X_ registers, identified by req.
+ * Returns data into buf in native USB byte order.
*/
-static int cp210x_get_config(struct usb_serial_port *port, u8 request,
- unsigned int *data, int size)
+static int cp210x_read_reg_block(struct usb_serial_port *port, u8 req,
+ void *buf, int bufsize)
{
struct usb_serial *serial = port->serial;
struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
- __le32 *buf;
- int result, i, length;
-
- /* Number of integers required to contain the array */
- length = (((size - 1) | 3) + 1) / 4;
+ void *dmabuf;
+ int result;
- buf = kcalloc(length, sizeof(__le32), GFP_KERNEL);
- if (!buf)
+ dmabuf = kmalloc(bufsize, GFP_KERNEL);
+ if (!dmabuf) {
+ /*
+ * FIXME Some callers don't bother to check for error,
+ * at least give them consistent junk until they are fixed
+ */
+ memset(buf, 0, bufsize);
return -ENOMEM;
+ }
- /* Issue the request, attempting to read 'size' bytes */
result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
- request, REQTYPE_INTERFACE_TO_HOST, 0x0000,
- port_priv->bInterfaceNumber, buf, size,
- USB_CTRL_GET_TIMEOUT);
+ req, REQTYPE_INTERFACE_TO_HOST, 0,
+ port_priv->bInterfaceNumber, dmabuf, bufsize,
+ USB_CTRL_SET_TIMEOUT);
+ if (result == bufsize) {
+ memcpy(buf, dmabuf, bufsize);
+ result = 0;
+ } else {
+ dev_err(&port->dev, "failed get req 0x%x size %d status: %d\n",
+ req, bufsize, result);
+ if (result >= 0)
+ result = -EPROTO;
- /* Convert data into an array of integers */
- for (i = 0; i < length; i++)
- data[i] = le32_to_cpu(buf[i]);
+ /*
+ * FIXME Some callers don't bother to check for error,
+ * at least give them consistent junk until they are fixed
+ */
+ memset(buf, 0, bufsize);
+ }
- kfree(buf);
+ kfree(dmabuf);
- if (result != size) {
- dev_dbg(&port->dev, "%s - Unable to send config request, request=0x%x size=%d result=%d\n",
- __func__, request, size, result);
- if (result > 0)
- result = -EPROTO;
+ return result;
+}
- return result;
+/*
+ * Reads any 32-bit CP210X_ register identified by req.
+ */
+static int cp210x_read_u32_reg(struct usb_serial_port *port, u8 req, u32 *val)
+{
+ __le32 le32_val;
+ int err;
+
+ err = cp210x_read_reg_block(port, req, &le32_val, sizeof(le32_val));
+ if (err) {
+ /*
+ * FIXME Some callers don't bother to check for error,
+ * at least give them consistent junk until they are fixed
+ */
+ *val = 0;
+ return err;
}
+ *val = le32_to_cpu(le32_val);
+
+ return 0;
+}
+
+/*
+ * Reads any 16-bit CP210X_ register identified by req.
+ */
+static int cp210x_read_u16_reg(struct usb_serial_port *port, u8 req, u16 *val)
+{
+ __le16 le16_val;
+ int err;
+
+ err = cp210x_read_reg_block(port, req, &le16_val, sizeof(le16_val));
+ if (err)
+ return err;
+
+ *val = le16_to_cpu(le16_val);
+
return 0;
}
/*
- * cp210x_set_config
- * Writes to the CP210x configuration registers
- * Values less than 16 bits wide are sent directly
- * 'size' is specified in bytes.
+ * Reads any 8-bit CP210X_ register identified by req.
+ */
+static int cp210x_read_u8_reg(struct usb_serial_port *port, u8 req, u8 *val)
+{
+ return cp210x_read_reg_block(port, req, val, sizeof(*val));
+}
+
+/*
+ * Writes any 16-bit CP210X_ register (req) whose value is passed
+ * entirely in the wValue field of the USB request.
*/
-static int cp210x_set_config(struct usb_serial_port *port, u8 request,
- unsigned int *data, int size)
+static int cp210x_write_u16_reg(struct usb_serial_port *port, u8 req, u16 val)
{
struct usb_serial *serial = port->serial;
struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
- __le32 *buf;
- int result, i, length;
+ int result;
+
+ result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+ req, REQTYPE_HOST_TO_INTERFACE, val,
+ port_priv->bInterfaceNumber, NULL, 0,
+ USB_CTRL_SET_TIMEOUT);
+ if (result < 0) {
+ dev_err(&port->dev, "failed set request 0x%x status: %d\n",
+ req, result);
+ }
+
+ return result;
+}
- /* Number of integers required to contain the array */
- length = (((size - 1) | 3) + 1) / 4;
+/*
+ * Writes a variable-sized block of CP210X_ registers, identified by req.
+ * Data in buf must be in native USB byte order.
+ */
+static int cp210x_write_reg_block(struct usb_serial_port *port, u8 req,
+ void *buf, int bufsize)
+{
+ struct usb_serial *serial = port->serial;
+ struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
+ void *dmabuf;
+ int result;
- buf = kmalloc(length * sizeof(__le32), GFP_KERNEL);
- if (!buf)
+ dmabuf = kmalloc(bufsize, GFP_KERNEL);
+ if (!dmabuf)
return -ENOMEM;
- /* Array of integers into bytes */
- for (i = 0; i < length; i++)
- buf[i] = cpu_to_le32(data[i]);
+ memcpy(dmabuf, buf, bufsize);
- if (size > 2) {
- result = usb_control_msg(serial->dev,
- usb_sndctrlpipe(serial->dev, 0),
- request, REQTYPE_HOST_TO_INTERFACE, 0x0000,
- port_priv->bInterfaceNumber, buf, size,
- USB_CTRL_SET_TIMEOUT);
- } else {
- result = usb_control_msg(serial->dev,
- usb_sndctrlpipe(serial->dev, 0),
- request, REQTYPE_HOST_TO_INTERFACE, data[0],
- port_priv->bInterfaceNumber, NULL, 0,
- USB_CTRL_SET_TIMEOUT);
- }
+ result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+ req, REQTYPE_HOST_TO_INTERFACE, 0,
+ port_priv->bInterfaceNumber, dmabuf, bufsize,
+ USB_CTRL_SET_TIMEOUT);
- kfree(buf);
+ kfree(dmabuf);
- if ((size > 2 && result != size) || result < 0) {
- dev_dbg(&port->dev, "%s - Unable to send request, request=0x%x size=%d result=%d\n",
- __func__, request, size, result);
- if (result > 0)
+ if (result == bufsize) {
+ result = 0;
+ } else {
+ dev_err(&port->dev, "failed set req 0x%x size %d status: %d\n",
+ req, bufsize, result);
+ if (result >= 0)
result = -EPROTO;
-
- return result;
}
- return 0;
+ return result;
}
/*
- * cp210x_set_config_single
- * Convenience function for calling cp210x_set_config on single data values
- * without requiring an integer pointer
+ * Writes any 32-bit CP210X_ register identified by req.
*/
-static inline int cp210x_set_config_single(struct usb_serial_port *port,
- u8 request, unsigned int data)
+static int cp210x_write_u32_reg(struct usb_serial_port *port, u8 req, u32 val)
{
- return cp210x_set_config(port, request, &data, 2);
+ __le32 le32_val;
+
+ le32_val = cpu_to_le32(val);
+
+ return cp210x_write_reg_block(port, req, &le32_val, sizeof(le32_val));
}
/*
@@ -445,47 +501,46 @@ static inline int cp210x_set_config_single(struct usb_serial_port *port,
static int cp210x_detect_swapped_line_ctl(struct usb_serial_port *port)
{
struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
- unsigned int line_ctl_save;
- unsigned int line_ctl_test;
+ u16 line_ctl_save;
+ u16 line_ctl_test;
int err;
- err = cp210x_get_config(port, CP210X_GET_LINE_CTL, &line_ctl_save, 2);
+ err = cp210x_read_u16_reg(port, CP210X_GET_LINE_CTL, &line_ctl_save);
if (err)
return err;
- line_ctl_test = 0x800;
- err = cp210x_set_config(port, CP210X_SET_LINE_CTL, &line_ctl_test, 2);
+ err = cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, 0x800);
if (err)
return err;
- err = cp210x_get_config(port, CP210X_GET_LINE_CTL, &line_ctl_test, 2);
+ err = cp210x_read_u16_reg(port, CP210X_GET_LINE_CTL, &line_ctl_test);
if (err)
return err;
if (line_ctl_test == 8) {
port_priv->has_swapped_line_ctl = true;
- line_ctl_save = swab16((u16)line_ctl_save);
+ line_ctl_save = swab16(line_ctl_save);
}
- return cp210x_set_config(port, CP210X_SET_LINE_CTL, &line_ctl_save, 2);
+ return cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, line_ctl_save);
}
/*
- * Must always be called instead of cp210x_get_config(CP210X_GET_LINE_CTL)
+ * Must always be called instead of cp210x_read_u16_reg(CP210X_GET_LINE_CTL)
* to workaround cp2108 bug and get correct value.
*/
-static int cp210x_get_line_ctl(struct usb_serial_port *port, unsigned int *ctl)
+static int cp210x_get_line_ctl(struct usb_serial_port *port, u16 *ctl)
{
struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
int err;
- err = cp210x_get_config(port, CP210X_GET_LINE_CTL, ctl, 2);
+ err = cp210x_read_u16_reg(port, CP210X_GET_LINE_CTL, ctl);
if (err)
return err;
/* Workaround swapped bytes in 16-bit value from CP210X_GET_LINE_CTL */
if (port_priv->has_swapped_line_ctl)
- *ctl = swab16((u16)(*ctl));
+ *ctl = swab16(*ctl);
return 0;
}
@@ -536,8 +591,7 @@ static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port)
{
int result;
- result = cp210x_set_config_single(port, CP210X_IFC_ENABLE,
- UART_ENABLE);
+ result = cp210x_write_u16_reg(port, CP210X_IFC_ENABLE, UART_ENABLE);
if (result) {
dev_err(&port->dev, "%s - Unable to enable UART\n", __func__);
return result;
@@ -555,15 +609,12 @@ static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port)
static void cp210x_close(struct usb_serial_port *port)
{
- unsigned int purge_ctl;
-
usb_serial_generic_close(port);
/* Clear both queues; cp2108 needs this to avoid an occasional hang */
- purge_ctl = PURGE_ALL;
- cp210x_set_config(port, CP210X_PURGE, &purge_ctl, 2);
+ cp210x_write_u16_reg(port, CP210X_PURGE, PURGE_ALL);
- cp210x_set_config_single(port, CP210X_IFC_ENABLE, UART_DISABLE);
+ cp210x_write_u16_reg(port, CP210X_IFC_ENABLE, UART_DISABLE);
}
/*
@@ -641,11 +692,12 @@ static void cp210x_get_termios_port(struct usb_serial_port *port,
unsigned int *cflagp, unsigned int *baudp)
{
struct device *dev = &port->dev;
- unsigned int cflag, modem_ctl[4];
- unsigned int baud;
- unsigned int bits;
+ unsigned int cflag;
+ u8 modem_ctl[16];
+ u32 baud;
+ u16 bits;
- cp210x_get_config(port, CP210X_GET_BAUDRATE, &baud, 4);
+ cp210x_read_u32_reg(port, CP210X_GET_BAUDRATE, &baud);
dev_dbg(dev, "%s - baud rate = %d\n", __func__, baud);
*baudp = baud;
@@ -676,14 +728,14 @@ static void cp210x_get_termios_port(struct usb_serial_port *port,
cflag |= CS8;
bits &= ~BITS_DATA_MASK;
bits |= BITS_DATA_8;
- cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
+ cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits);
break;
default:
dev_dbg(dev, "%s - Unknown number of data bits, using 8\n", __func__);
cflag |= CS8;
bits &= ~BITS_DATA_MASK;
bits |= BITS_DATA_8;
- cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
+ cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits);
break;
}
@@ -714,7 +766,7 @@ static void cp210x_get_termios_port(struct usb_serial_port *port,
dev_dbg(dev, "%s - Unknown parity mode, disabling parity\n", __func__);
cflag &= ~PARENB;
bits &= ~BITS_PARITY_MASK;
- cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
+ cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits);
break;
}
@@ -726,7 +778,7 @@ static void cp210x_get_termios_port(struct usb_serial_port *port,
case BITS_STOP_1_5:
dev_dbg(dev, "%s - stop bits = 1.5 (not supported, using 1 stop bit)\n", __func__);
bits &= ~BITS_STOP_MASK;
- cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
+ cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits);
break;
case BITS_STOP_2:
dev_dbg(dev, "%s - stop bits = 2\n", __func__);
@@ -735,12 +787,13 @@ static void cp210x_get_termios_port(struct usb_serial_port *port,
default:
dev_dbg(dev, "%s - Unknown number of stop bits, using 1 stop bit\n", __func__);
bits &= ~BITS_STOP_MASK;
- cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
+ cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits);
break;
}
- cp210x_get_config(port, CP210X_GET_FLOW, modem_ctl, 16);
- if (modem_ctl[0] & 0x0008) {
+ cp210x_read_reg_block(port, CP210X_GET_FLOW, modem_ctl,
+ sizeof(modem_ctl));
+ if (modem_ctl[0] & 0x08) {
dev_dbg(dev, "%s - flow control = CRTSCTS\n", __func__);
cflag |= CRTSCTS;
} else {
@@ -792,8 +845,7 @@ static void cp210x_change_speed(struct tty_struct *tty,
baud = cp210x_quantise_baudrate(baud);
dev_dbg(&port->dev, "%s - setting baud rate to %u\n", __func__, baud);
- if (cp210x_set_config(port, CP210X_SET_BAUDRATE, &baud,
- sizeof(baud))) {
+ if (cp210x_write_u32_reg(port, CP210X_SET_BAUDRATE, baud)) {
dev_warn(&port->dev, "failed to set baud rate to %u\n", baud);
if (old_termios)
baud = old_termios->c_ospeed;
@@ -809,8 +861,8 @@ static void cp210x_set_termios(struct tty_struct *tty,
{
struct device *dev = &port->dev;
unsigned int cflag, old_cflag;
- unsigned int bits;
- unsigned int modem_ctl[4];
+ u16 bits;
+ u8 modem_ctl[16];
cflag = tty->termios.c_cflag;
old_cflag = old_termios->c_cflag;
@@ -848,7 +900,7 @@ static void cp210x_set_termios(struct tty_struct *tty,
bits |= BITS_DATA_8;
break;
}
- if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2))
+ if (cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits))
dev_dbg(dev, "Number of data bits requested not supported by device\n");
}
@@ -875,7 +927,7 @@ static void cp210x_set_termios(struct tty_struct *tty,
}
}
}
- if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2))
+ if (cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits))
dev_dbg(dev, "Parity mode not supported by device\n");
}
@@ -889,32 +941,40 @@ static void cp210x_set_termios(struct tty_struct *tty,
bits |= BITS_STOP_1;
dev_dbg(dev, "%s - stop bits = 1\n", __func__);
}
- if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2))
+ if (cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits))
dev_dbg(dev, "Number of stop bits requested not supported by device\n");
}
if ((cflag & CRTSCTS) != (old_cflag & CRTSCTS)) {
- cp210x_get_config(port, CP210X_GET_FLOW, modem_ctl, 16);
- dev_dbg(dev, "%s - read modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x\n",
- __func__, modem_ctl[0], modem_ctl[1],
- modem_ctl[2], modem_ctl[3]);
+
+ /* Only bytes 0, 4 and 7 out of first 8 have functional bits */
+
+ cp210x_read_reg_block(port, CP210X_GET_FLOW, modem_ctl,
+ sizeof(modem_ctl));
+ dev_dbg(dev, "%s - read modem controls = %02x .. .. .. %02x .. .. %02x\n",
+ __func__, modem_ctl[0], modem_ctl[4], modem_ctl[7]);
if (cflag & CRTSCTS) {
modem_ctl[0] &= ~0x7B;
modem_ctl[0] |= 0x09;
- modem_ctl[1] = 0x80;
+ modem_ctl[4] = 0x80;
+ /* FIXME - why clear reserved bits just read? */
+ modem_ctl[5] = 0;
+ modem_ctl[6] = 0;
+ modem_ctl[7] = 0;
dev_dbg(dev, "%s - flow control = CRTSCTS\n", __func__);
} else {
modem_ctl[0] &= ~0x7B;
modem_ctl[0] |= 0x01;
- modem_ctl[1] |= 0x40;
+ /* FIXME - OR here instead of assignment looks wrong */
+ modem_ctl[4] |= 0x40;
dev_dbg(dev, "%s - flow control = NONE\n", __func__);
}
- dev_dbg(dev, "%s - write modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x\n",
- __func__, modem_ctl[0], modem_ctl[1],
- modem_ctl[2], modem_ctl[3]);
- cp210x_set_config(port, CP210X_SET_FLOW, modem_ctl, 16);
+ dev_dbg(dev, "%s - write modem controls = %02x .. .. .. %02x .. .. %02x\n",
+ __func__, modem_ctl[0], modem_ctl[4], modem_ctl[7]);
+ cp210x_write_reg_block(port, CP210X_SET_FLOW, modem_ctl,
+ sizeof(modem_ctl));
}
}
@@ -929,7 +989,7 @@ static int cp210x_tiocmset(struct tty_struct *tty,
static int cp210x_tiocmset_port(struct usb_serial_port *port,
unsigned int set, unsigned int clear)
{
- unsigned int control = 0;
+ u16 control = 0;
if (set & TIOCM_RTS) {
control |= CONTROL_RTS;
@@ -950,7 +1010,7 @@ static int cp210x_tiocmset_port(struct usb_serial_port *port,
dev_dbg(&port->dev, "%s - control = 0x%.4x\n", __func__, control);
- return cp210x_set_config(port, CP210X_SET_MHS, &control, 2);
+ return cp210x_write_u16_reg(port, CP210X_SET_MHS, control);
}
static void cp210x_dtr_rts(struct usb_serial_port *p, int on)
@@ -964,10 +1024,10 @@ static void cp210x_dtr_rts(struct usb_serial_port *p, int on)
static int cp210x_tiocmget(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
- unsigned int control;
+ u8 control;
int result;
- cp210x_get_config(port, CP210X_GET_MDMSTS, &control, 1);
+ cp210x_read_u8_reg(port, CP210X_GET_MDMSTS, &control);
result = ((control & CONTROL_DTR) ? TIOCM_DTR : 0)
|((control & CONTROL_RTS) ? TIOCM_RTS : 0)
@@ -984,7 +1044,7 @@ static int cp210x_tiocmget(struct tty_struct *tty)
static void cp210x_break_ctl(struct tty_struct *tty, int break_state)
{
struct usb_serial_port *port = tty->driver_data;
- unsigned int state;
+ u16 state;
if (break_state == 0)
state = BREAK_OFF;
@@ -992,7 +1052,7 @@ static void cp210x_break_ctl(struct tty_struct *tty, int break_state)
state = BREAK_ON;
dev_dbg(&port->dev, "%s - turning break %s\n", __func__,
state == BREAK_OFF ? "off" : "on");
- cp210x_set_config(port, CP210X_SET_BREAK, &state, 2);
+ cp210x_write_u16_reg(port, CP210X_SET_BREAK, state);
}
static int cp210x_port_probe(struct usb_serial_port *port)